| /* | 
 |  * Copyright (c) 2014 MediaTek Inc. | 
 |  * Author: Xudong.chen <xudong.chen@mediatek.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/init.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/err.h> | 
 | #include <linux/device.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/wait.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/scatterlist.h> | 
 | #include <linux/io.h> | 
 | #include <linux/of_address.h> | 
 | #include <linux/of_irq.h> | 
 | #include <linux/clk.h> | 
 | #include <linux/clk-provider.h> | 
 |  | 
 | #if 0 | 
 | #include <mtk_cpufreq_hybrid.h> | 
 | #endif | 
 | #ifdef CONFIG_MTK_GPU_SPM_DVFS_SUPPORT | 
 | #include <mtk_kbase_spm.h> | 
 | #endif | 
 | #ifdef CONFIG_MTK_TINYSYS_SCP_SUPPORT | 
 | #include <scp_helper.h> | 
 | #endif | 
 | #include "mtk_secure_api.h" | 
 | #include "i2c-mtk.h" | 
 |  | 
 | static struct i2c_dma_info g_dma_regs[I2C_MAX_CHANNEL]; | 
 | static struct mt_i2c *g_mt_i2c[I2C_MAX_CHANNEL]; | 
 | static struct mtk_i2c_compatible i2c_common_compat; | 
 |  | 
 |  | 
 | static inline void _i2c_writew(u16 value, struct mt_i2c *i2c, u16 offset) | 
 | { | 
 | 	writew(value, i2c->base + offset); | 
 | } | 
 |  | 
 | static inline u16 _i2c_readw(struct mt_i2c *i2c, u16 offset) | 
 | { | 
 | 	return readw(i2c->base + offset); | 
 | } | 
 |  | 
 | #define raw_i2c_writew(val, i2c, ch_ofs, ofs) \ | 
 | 	do { \ | 
 | 		if (((i2c)->dev_comp->ver != 0x2) || (V2_##ofs != 0xfff)) \ | 
 | 			_i2c_writew(val, i2c, ch_ofs + \ | 
 | 				    (((i2c)->dev_comp->ver == 0x2) ? \ | 
 | 				    (V2_##ofs) : ofs)); \ | 
 | 	} while (0) | 
 |  | 
 | #define raw_i2c_readw(i2c, ch_ofs, ofs) \ | 
 | 	({ \ | 
 | 		u16 value = 0; \ | 
 | 		if (((i2c)->dev_comp->ver != 0x2) || (V2_##ofs != 0xfff)) \ | 
 | 			value = _i2c_readw(i2c, ch_ofs + \ | 
 | 					   (((i2c)->dev_comp->ver == 0x2) ? \ | 
 | 					   (V2_##ofs) : ofs)); \ | 
 | 		value; \ | 
 | 	}) | 
 |  | 
 | #define i2c_writew(val, i2c, ofs) raw_i2c_writew(val, i2c, i2c->ch_offset, ofs) | 
 |  | 
 | #define i2c_readw(i2c, ofs) raw_i2c_readw(i2c, i2c->ch_offset, ofs) | 
 |  | 
 | #define i2c_writew_shadow(val, i2c, ofs) raw_i2c_writew(val, i2c, 0, ofs) | 
 |  | 
 | #define i2c_readw_shadow(i2c, ofs) raw_i2c_readw(i2c, 0, ofs) | 
 |  | 
 | void __iomem *cg_base; | 
 |  | 
 | s32 map_cg_regs(struct mt_i2c *i2c) | 
 | { | 
 | 	struct device_node *cg_node; | 
 | 	int ret = -1; | 
 |  | 
 | 	if (!cg_base && i2c->dev_comp->clk_compatible[0]) { | 
 | 		cg_node = of_find_compatible_node(NULL, NULL, | 
 | 			i2c->dev_comp->clk_compatible); | 
 | 		if (!cg_node) { | 
 | 			pr_info("Cannot find cg_node\n"); | 
 | 			return -ENODEV; | 
 | 		} | 
 | 		cg_base = of_iomap(cg_node, 0); | 
 | 		if (!cg_base) { | 
 | 			pr_info("cg_base iomap failed\n"); | 
 | 			return -ENOMEM; | 
 | 		} | 
 | 		ret = 0; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | void dump_cg_regs(struct mt_i2c *i2c) | 
 | { | 
 | 	u32 clk_sta_val, clk_sta_offs, cg_bit; | 
 | 	u32 clk_sel_val, arbit_val, clk_sel_offs, arbit_offs; | 
 |  | 
 | 	if (!cg_base || i2c->id >= I2C_MAX_CHANNEL) { | 
 | 		pr_info("cg_base %p, i2c id = %d\n", cg_base, i2c->id); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	clk_sta_offs = i2c->clk_sta_offset; | 
 | 	clk_sta_val = readl(cg_base + clk_sta_offs); | 
 | 	cg_bit = i2c->cg_bit; | 
 |  | 
 | 	pr_info("[I2C] cg regs dump:\n" | 
 | 		"name %s, offset 0x%x: value = 0x%08x, bit %d, clock %s\n", | 
 | 		i2c->dev_comp->clk_compatible, | 
 | 		clk_sta_offs, clk_sta_val, cg_bit, | 
 | 		clk_sta_val & (1 << cg_bit) ? "off":"on"); | 
 |  | 
 | 	/* Dump clk source & arbit bit */ | 
 | 	clk_sel_offs = i2c->dev_comp->clk_sel_offset; | 
 | 	clk_sel_val = readl(cg_base + clk_sel_offs); | 
 | 	arbit_offs = i2c->dev_comp->arbit_offset; | 
 | 	arbit_val = readl(cg_base + arbit_offs); | 
 | 	pr_info("[I2C] clk src & arbit dump:\n" | 
 | 		"name: %s, clk_sel_offs: 0x%x, val=0x%08x, arbit_offs: 0x%x, val=0x%08x\n", | 
 | 			i2c->dev_comp->clk_compatible, | 
 | 			clk_sel_offs, clk_sel_val, | 
 | 			arbit_offs, arbit_val); | 
 | } | 
 |  | 
 | void __iomem *dma_base; | 
 |  | 
 | s32 map_dma_regs(void) | 
 | { | 
 | 	struct device_node *dma_node; | 
 |  | 
 | 	dma_node = of_find_compatible_node(NULL, NULL, "mediatek,ap_dma"); | 
 | 	if (!dma_node) { | 
 | 		pr_info("Cannot find dma_node\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	dma_base = of_iomap(dma_node, 0); | 
 | 	if (!dma_base) { | 
 | 		pr_info("dma_base iomap failed\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | void dump_dma_regs(void) | 
 | { | 
 | 	int status; | 
 | 	int i; | 
 |  | 
 | 	if (!dma_base) { | 
 | 		pr_info("dma_base NULL\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	status =  readl(dma_base + 8); | 
 | 	pr_info("DMA RUNNING STATUS : 0x%x .\n", status); | 
 | 	for (i = 0; i < 21 ; i++) { | 
 | 		if (status & (0x1 << i)) | 
 | 			pr_info("DMA[%d] CONTROL REG : 0x%x, DEBUG : 0x%x .\n", | 
 | 				i, | 
 | 				readl(dma_base + 0x80 + 0x80 * i + 0x18), | 
 | 				readl(dma_base + 0x80 + 0x80 * i + 0x50)); | 
 | 	} | 
 |  | 
 | } | 
 |  | 
 | static inline void i2c_writel_dma(u32 value, struct mt_i2c *i2c, u8 offset) | 
 | { | 
 | 	writel(value, i2c->pdmabase + i2c->ch_offset_dma + offset); | 
 | } | 
 |  | 
 | static inline u32 i2c_readl_dma(struct mt_i2c *i2c, u8 offset) | 
 | { | 
 | 	return readl(i2c->pdmabase + i2c->ch_offset_dma + offset); | 
 | } | 
 |  | 
 | static void record_i2c_dma_info(struct mt_i2c *i2c) | 
 | { | 
 | 	g_dma_regs[i2c->id].base = | 
 | 		(unsigned long)i2c->pdmabase; | 
 | 	g_dma_regs[i2c->id].int_flag = | 
 | 		i2c_readl_dma(i2c, OFFSET_INT_FLAG); | 
 | 	g_dma_regs[i2c->id].int_en = | 
 | 		i2c_readl_dma(i2c, OFFSET_INT_EN); | 
 | 	g_dma_regs[i2c->id].en = | 
 | 		i2c_readl_dma(i2c, OFFSET_EN); | 
 | 	g_dma_regs[i2c->id].rst = | 
 | 		i2c_readl_dma(i2c, OFFSET_RST); | 
 | 	g_dma_regs[i2c->id].stop = | 
 | 		i2c_readl_dma(i2c, OFFSET_STOP); | 
 | 	g_dma_regs[i2c->id].flush = | 
 | 		i2c_readl_dma(i2c, OFFSET_FLUSH); | 
 | 	g_dma_regs[i2c->id].con = | 
 | 		i2c_readl_dma(i2c, OFFSET_CON); | 
 | 	g_dma_regs[i2c->id].tx_mem_addr = | 
 | 		i2c_readl_dma(i2c, OFFSET_TX_MEM_ADDR); | 
 | 	g_dma_regs[i2c->id].rx_mem_addr = | 
 | 		i2c_readl_dma(i2c, OFFSET_RX_MEM_ADDR); | 
 | 	g_dma_regs[i2c->id].tx_len = | 
 | 		i2c_readl_dma(i2c, OFFSET_TX_LEN); | 
 | 	g_dma_regs[i2c->id].rx_len = | 
 | 		i2c_readl_dma(i2c, OFFSET_RX_LEN); | 
 | 	g_dma_regs[i2c->id].int_buf_size = | 
 | 		i2c_readl_dma(i2c, OFFSET_INT_BUF_SIZE); | 
 | 	g_dma_regs[i2c->id].debug_sta = | 
 | 		i2c_readl_dma(i2c, OFFSET_DEBUG_STA); | 
 | 	g_dma_regs[i2c->id].tx_mem_addr2 = | 
 | 		i2c_readl_dma(i2c, OFFSET_TX_MEM_ADDR2); | 
 | 	g_dma_regs[i2c->id].rx_mem_addr2 = | 
 | 		i2c_readl_dma(i2c, OFFSET_RX_MEM_ADDR2); | 
 | } | 
 |  | 
 | static void record_i2c_info(struct mt_i2c *i2c, int tmo) | 
 | { | 
 | 	int idx = i2c->rec_idx; | 
 |  | 
 | 	i2c->rec_info[idx].slave_addr = i2c_readw(i2c, OFFSET_SLAVE_ADDR); | 
 | 	i2c->rec_info[idx].intr_stat = i2c->irq_stat; | 
 | 	i2c->rec_info[idx].control = i2c_readw(i2c, OFFSET_CONTROL); | 
 | 	i2c->rec_info[idx].fifo_stat = i2c_readw(i2c, OFFSET_FIFO_STAT); | 
 | 	i2c->rec_info[idx].debug_stat = i2c_readw(i2c, OFFSET_DEBUGSTAT); | 
 | 	i2c->rec_info[idx].tmo = tmo; | 
 | 	i2c->rec_info[idx].end_time = sched_clock(); | 
 |  | 
 | 	i2c->rec_idx++; | 
 | 	if (i2c->rec_idx == I2C_RECORD_LEN) | 
 | 		i2c->rec_idx = 0; | 
 | } | 
 |  | 
 | static void dump_i2c_info(struct mt_i2c *i2c) | 
 | { | 
 | 	int i; | 
 | 	int idx = i2c->rec_idx; | 
 | 	unsigned long long endtime; | 
 | 	unsigned long ns; | 
 |  | 
 | 	if (i2c->buffermode) /* no i2c history @ buffermode */ | 
 | 		return; | 
 |  | 
 | 	dev_info(i2c->dev, "last transfer info:\n"); | 
 |  | 
 | 	for (i = 0; i < I2C_RECORD_LEN; i++) { | 
 | 		if (idx == 0) | 
 | 			idx = I2C_RECORD_LEN; | 
 | 		idx--; | 
 | 		endtime = i2c->rec_info[idx].end_time; | 
 | 		ns = do_div(endtime, 1000000000); | 
 | 		dev_info(i2c->dev, | 
 | 			"[%02d] [%5lu.%06lu] SLAVE_ADDR=%x,INTR_STAT=%x,CONTROL=%x,FIFO_STAT=%x,DEBUGSTAT=%x, tmo=%d\n", | 
 | 			i, | 
 | 			(unsigned long)endtime, | 
 | 			ns/1000, | 
 | 			i2c->rec_info[idx].slave_addr, | 
 | 			i2c->rec_info[idx].intr_stat, | 
 | 			i2c->rec_info[idx].control, | 
 | 			i2c->rec_info[idx].fifo_stat, | 
 | 			i2c->rec_info[idx].debug_stat, | 
 | 			i2c->rec_info[idx].tmo | 
 | 		); | 
 | 	} | 
 | } | 
 |  | 
 | static int mt_i2c_clock_enable(struct mt_i2c *i2c) | 
 | { | 
 | #if !defined(CONFIG_MT_I2C_FPGA_ENABLE) | 
 | 	int ret = 0; | 
 |  | 
 | 	ret = clk_prepare_enable(i2c->clk_dma); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (i2c->clk_pal != NULL) { | 
 | 		ret = clk_prepare_enable(i2c->clk_pal); | 
 | 		if (ret) | 
 | 			goto err_main; | 
 | 	} | 
 |  | 
 | 	if (i2c->clk_arb != NULL) { | 
 | 		ret = clk_prepare_enable(i2c->clk_arb); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 | 	ret = clk_prepare_enable(i2c->clk_main); | 
 | 	if (ret) | 
 | 		goto err_main; | 
 |  | 
 | 	if (i2c->have_pmic) { | 
 | 		ret = clk_prepare_enable(i2c->clk_pmic); | 
 | 		if (ret) | 
 | 			goto err_pmic; | 
 | 	} | 
 | 	spin_lock(&i2c->cg_lock); | 
 | 	if (i2c->suspended) | 
 | 		ret = -EIO; | 
 | 	else | 
 | 		i2c->cg_cnt++; | 
 | 	spin_unlock(&i2c->cg_lock); | 
 | 	if (ret) { | 
 | 		dev_info(i2c->dev, "err, access at suspend no irq stage\n"); | 
 | 		goto err_cg; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_cg: | 
 | 	if (i2c->have_pmic) | 
 | 		clk_disable_unprepare(i2c->clk_pmic); | 
 | err_pmic: | 
 | 	clk_disable_unprepare(i2c->clk_main); | 
 | err_main: | 
 | 	if (i2c->clk_arb) | 
 | 		clk_disable_unprepare(i2c->clk_arb); | 
 | 	clk_disable_unprepare(i2c->clk_dma); | 
 | 	return ret; | 
 | #else | 
 | 	return 0; | 
 | #endif | 
 | } | 
 |  | 
 | static void mt_i2c_clock_disable(struct mt_i2c *i2c) | 
 | { | 
 | #if !defined(CONFIG_MT_I2C_FPGA_ENABLE) | 
 | 	if (i2c->have_pmic) | 
 | 		clk_disable_unprepare(i2c->clk_pmic); | 
 |  | 
 | 	clk_disable_unprepare(i2c->clk_main); | 
 | 	if (i2c->clk_pal != NULL) | 
 | 		clk_disable_unprepare(i2c->clk_pal); | 
 |  | 
 | 	if (i2c->clk_arb != NULL) | 
 | 		clk_disable_unprepare(i2c->clk_arb); | 
 |  | 
 | 	clk_disable_unprepare(i2c->clk_dma); | 
 | 	spin_lock(&i2c->cg_lock); | 
 | 	i2c->cg_cnt--; | 
 | 	spin_unlock(&i2c->cg_lock); | 
 | #endif | 
 | } | 
 |  | 
 | static int i2c_get_semaphore(struct mt_i2c *i2c) | 
 | { | 
 | #if 0 | 
 | 	int count = 100; | 
 | #endif | 
 | 	#if 0 | 
 | 	if (i2c->appm) { | 
 | 		if (cpuhvfs_get_dvfsp_semaphore(SEMA_I2C_DRV) != 0) { | 
 | 			dev_info(i2c->dev, "sema time out 2ms\n"); | 
 | 			if (cpuhvfs_get_dvfsp_semaphore(SEMA_I2C_DRV) != 0) { | 
 | 				dev_info(i2c->dev, "sema time out 4ms\n"); | 
 | 				i2c_dump_info(i2c); | 
 | 				WARN_ON(1); | 
 | 				return -EBUSY; | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	#endif | 
 |  | 
 | #ifdef CONFIG_MTK_GPU_SPM_DVFS_SUPPORT | 
 | 	if (i2c->gpupm) { | 
 | 		if (dvfs_gpu_pm_spin_lock_for_vgpu() != 0) { | 
 | 			dev_info(i2c->dev, "sema time out.\n"); | 
 | 			return -EBUSY; | 
 | 		} | 
 | 	} | 
 | #endif | 
 |  | 
 | 	switch (i2c->id) { | 
 | #if 0 | 
 | 	case 0: | 
 | 		while ((get_scp_semaphore(SEMAPHORE_I2C0) != 1) && count > 0) | 
 | 			count--; | 
 | 		return count > 0 ? 0 : -EBUSY; | 
 | 	case 1: | 
 | 		while ((get_scp_semaphore(SEMAPHORE_I2C1) != 1) && count > 0) | 
 | 			count--; | 
 | 		return count > 0 ? 0 : -EBUSY; | 
 | #endif | 
 | 	default: | 
 | 		return 0; | 
 | 	} | 
 | } | 
 |  | 
 | static int i2c_release_semaphore(struct mt_i2c *i2c) | 
 | { | 
 | 	#if 0 | 
 | 	if (i2c->appm) | 
 | 		cpuhvfs_release_dvfsp_semaphore(SEMA_I2C_DRV); | 
 | 	#endif | 
 | #ifdef CONFIG_MTK_GPU_SPM_DVFS_SUPPORT | 
 | 	if (i2c->gpupm) | 
 | 		dvfs_gpu_pm_spin_unlock_for_vgpu(); | 
 | #endif | 
 |  | 
 | 	switch (i2c->id) { | 
 | #if 0 | 
 | 	case 0: | 
 | 		return release_scp_semaphore(SEMAPHORE_I2C0) == 1 ? 0 : -EBUSY; | 
 | 	case 1: | 
 | 		return release_scp_semaphore(SEMAPHORE_I2C1) == 1 ? 0 : -EBUSY; | 
 | #endif | 
 | 	default: | 
 | 		return 0; | 
 | 	} | 
 | } | 
 | static void free_i2c_dma_bufs(struct mt_i2c *i2c) | 
 | { | 
 | 	dma_free_coherent(i2c->adap.dev.parent, PAGE_SIZE, | 
 | 		i2c->dma_buf.vaddr, i2c->dma_buf.paddr); | 
 | } | 
 |  | 
 | static inline void mt_i2c_wait_done(struct mt_i2c *i2c, u16 ch_off) | 
 | { | 
 | 	u16 start, tmo; | 
 |  | 
 | 	start = raw_i2c_readw(i2c, ch_off, OFFSET_START) & I2C_TRANSAC_START; | 
 | 	if (start) { | 
 | 		dev_info(i2c->dev, "wait transfer done before cg off.\n"); | 
 |  | 
 | 		tmo = 100; | 
 | 		do { | 
 | 			msleep(20); | 
 | 			start = raw_i2c_readw(i2c, ch_off, OFFSET_START) & | 
 | 				I2C_TRANSAC_START; | 
 | 			tmo--; | 
 | 		} while (start && tmo); | 
 |  | 
 | 		if (start && !tmo) { | 
 | 			dev_info(i2c->dev, "wait transfer timeout.\n"); | 
 | 			i2c_dump_info(i2c); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static inline void mt_i2c_init_hw(struct mt_i2c *i2c) | 
 | { | 
 | 	/* clear interrupt status */ | 
 | 	i2c_writew_shadow(0, i2c, OFFSET_INTR_MASK); | 
 | 	i2c->irq_stat = i2c_readw_shadow(i2c, OFFSET_INTR_STAT); | 
 | 	i2c_writew_shadow(i2c->irq_stat, i2c, OFFSET_INTR_STAT); | 
 |  | 
 | 	i2c_writew_shadow(I2C_SOFT_RST, i2c, OFFSET_SOFTRESET); | 
 | 	/* Set ioconfig */ | 
 | 	if (i2c->use_push_pull) | 
 | 		i2c_writew_shadow(I2C_IO_CONFIG_PUSH_PULL, | 
 | 			i2c, OFFSET_IO_CONFIG); | 
 | 	else | 
 | 		i2c_writew_shadow(I2C_IO_CONFIG_OPEN_DRAIN, | 
 | 			i2c, OFFSET_IO_CONFIG); | 
 | 	if (i2c->have_dcm) | 
 | 		i2c_writew_shadow(I2C_DCM_DISABLE, i2c, OFFSET_DCM_EN); | 
 |  | 
 | 	if (i2c->dev_comp->ver != 0x2) | 
 | 		i2c_writew_shadow(i2c->timing_reg, i2c, OFFSET_TIMING); | 
 | 	else | 
 | 		i2c_writew_shadow(i2c->timing_reg | I2C_TIMEOUT_EN, i2c, | 
 | 			   OFFSET_TIMING); | 
 |  | 
 | 	if (i2c->dev_comp->set_ltiming) | 
 | 		i2c_writew_shadow(i2c->ltiming_reg, i2c, OFFSET_LTIMING); | 
 | 	i2c_writew_shadow(i2c->high_speed_reg, i2c, OFFSET_HS); | 
 | 	/* DMA warm reset, and waits for EN to become 0 */ | 
 | 	i2c_writel_dma(I2C_DMA_WARM_RST, i2c, OFFSET_RST); | 
 | 	udelay(5); | 
 | 	if (i2c_readl_dma(i2c, OFFSET_EN) != 0) { | 
 | 		dev_info(i2c->dev, "DMA bus hang .\n"); | 
 | 		dump_dma_regs(); | 
 | 		WARN_ON(1); | 
 | 	} | 
 | } | 
 |  | 
 | /* calculate i2c port speed */ | 
 | static int mtk_i2c_calculate_speed(struct mt_i2c *i2c, | 
 | 	unsigned int clk_src_in_hz, | 
 | 	unsigned int speed_hz, | 
 | 	unsigned int *timing_step_cnt, | 
 | 	unsigned int *timing_sample_cnt) | 
 | { | 
 | 	unsigned int khz; | 
 | 	unsigned int step_cnt; | 
 | 	unsigned int sample_cnt; | 
 | 	unsigned int sclk; | 
 | 	unsigned int hclk; | 
 | 	unsigned int max_step_cnt; | 
 | 	unsigned int sample_div = MAX_SAMPLE_CNT_DIV; | 
 | 	unsigned int step_div; | 
 | 	unsigned int min_div; | 
 | 	unsigned int best_mul; | 
 | 	unsigned int cnt_mul; | 
 |  | 
 | 	if (speed_hz > MAX_HS_MODE_SPEED) { | 
 | 		if (i2c->dev_comp->check_max_freq) | 
 | 			return -EINVAL; | 
 | 		max_step_cnt = MAX_HS_STEP_CNT_DIV; | 
 | 	} else if (speed_hz > MAX_FS_MODE_SPEED) { | 
 | 		max_step_cnt = MAX_HS_STEP_CNT_DIV; | 
 | 	} else { | 
 | 		max_step_cnt = MAX_STEP_CNT_DIV; | 
 | 	} | 
 | 	step_div = max_step_cnt; | 
 |  | 
 | 	/* Find the best combination */ | 
 | 	khz = speed_hz / 1000; | 
 | 	hclk = clk_src_in_hz / 1000; | 
 | 	min_div = ((hclk >> 1) + khz - 1) / khz; | 
 | 	best_mul = MAX_SAMPLE_CNT_DIV * max_step_cnt; | 
 | 	for (sample_cnt = 1; sample_cnt <= MAX_SAMPLE_CNT_DIV; sample_cnt++) { | 
 | 		step_cnt = (min_div + sample_cnt - 1) / sample_cnt; | 
 | 		cnt_mul = step_cnt * sample_cnt; | 
 | 		if (step_cnt > max_step_cnt) | 
 | 			continue; | 
 | 		if (cnt_mul < best_mul) { | 
 | 			best_mul = cnt_mul; | 
 | 			sample_div = sample_cnt; | 
 | 			step_div = step_cnt; | 
 | 			if (best_mul == min_div) | 
 | 				break; | 
 | 		} | 
 | 	} | 
 | 	sample_cnt = sample_div; | 
 | 	step_cnt = step_div; | 
 | 	sclk = hclk / (2 * sample_cnt * step_cnt); | 
 | 	if (sclk > khz) { | 
 | 		dev_dbg(i2c->dev, "%s mode: unsupported speed (%ldkhz)\n", | 
 | 			(speed_hz > MAX_FS_MODE_SPEED) ? "HS" : "ST/FT", | 
 | 			(long int)khz); | 
 | 		return -ENOTSUPP; | 
 | 	} | 
 |  | 
 | 	if (i2c->dev_comp->cnt_constraint) { | 
 | 		if (--sample_cnt) {/* --sample_cnt = 0, setp_cnt needn't -1  */ | 
 | 			step_cnt--; | 
 | 		} | 
 | 	} else { | 
 | 		sample_cnt--; | 
 | 		step_cnt--; | 
 | 	} | 
 |  | 
 | 	*timing_step_cnt = step_cnt; | 
 | 	*timing_sample_cnt = sample_cnt; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int i2c_set_speed(struct mt_i2c *i2c, unsigned int clk_src_in_hz) | 
 | { | 
 | 	int ret; | 
 | 	unsigned int step_cnt; | 
 | 	unsigned int sample_cnt; | 
 | 	unsigned int l_step_cnt; | 
 | 	unsigned int l_sample_cnt; | 
 | 	unsigned int speed_hz; | 
 | 	unsigned int duty = HALF_DUTY_CYCLE; | 
 |  | 
 | 	if (i2c->ext_data.isEnable && i2c->ext_data.timing) | 
 | 		speed_hz = i2c->ext_data.timing; | 
 | 	else | 
 | 		speed_hz = i2c->speed_hz; | 
 |  | 
 | 	if (speed_hz > MAX_FS_PLUS_MODE_SPEED && !i2c->hs_only) { | 
 | 		/* Set the hign speed mode register */ | 
 | 		ret = mtk_i2c_calculate_speed(i2c, clk_src_in_hz, | 
 | 			MAX_FS_MODE_SPEED, &l_step_cnt, &l_sample_cnt); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 |  | 
 | 		ret = mtk_i2c_calculate_speed(i2c, clk_src_in_hz, | 
 | 			speed_hz, &step_cnt, &sample_cnt); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 |  | 
 | 		i2c->high_speed_reg = I2C_HS_HOLD_TIME | | 
 | 			I2C_TIME_DEFAULT_VALUE | I2C_HS_SPEED | | 
 | 			(sample_cnt & I2C_TIMING_SAMPLE_COUNT_MASK) << 12 | | 
 | 			((step_cnt - 1) & I2C_TIMING_SAMPLE_COUNT_MASK) << 8; | 
 |  | 
 | 		i2c->timing_reg = | 
 | 			(l_sample_cnt & I2C_TIMING_SAMPLE_COUNT_MASK) << 8 | | 
 | 			(l_step_cnt & I2C_TIMING_STEP_DIV_MASK) << 0; | 
 |  | 
 | 		if (i2c->dev_comp->set_ltiming) { | 
 | 			i2c->ltiming_reg = I2C_HS_HOLD_SEL | (l_sample_cnt << 6) | 
 | 				| (l_step_cnt << 0) | | 
 | 				(sample_cnt & | 
 | 				I2C_TIMING_SAMPLE_COUNT_MASK) << 12 | | 
 | 				((step_cnt + 1) & | 
 | 				I2C_TIMING_SAMPLE_COUNT_MASK) << 9; | 
 | 		} | 
 | 	} else { | 
 | 		if (speed_hz > I2C_DEFAUT_SPEED | 
 | 			&& speed_hz <= MAX_FS_MODE_SPEED | 
 | 			&& i2c->dev_comp->set_ltiming) | 
 | 			duty = DUTY_CYCLE; | 
 |  | 
 | 		ret = mtk_i2c_calculate_speed(i2c, clk_src_in_hz, | 
 | 			(speed_hz * 50 / duty), &step_cnt, &sample_cnt); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 |  | 
 | 		i2c->timing_reg = | 
 | 			(sample_cnt & I2C_TIMING_SAMPLE_COUNT_MASK) << 8 | | 
 | 			(step_cnt & I2C_TIMING_STEP_DIV_MASK) << 0; | 
 |  | 
 | 		if (i2c->dev_comp->set_ltiming) { | 
 | 			ret = mtk_i2c_calculate_speed(i2c, clk_src_in_hz, | 
 | 				(speed_hz * 50 / (100 - duty)), | 
 | 				&l_step_cnt, &l_sample_cnt); | 
 | 			if (ret < 0) | 
 | 				return ret; | 
 |  | 
 | 			i2c->ltiming_reg = | 
 | 				(l_sample_cnt & | 
 | 					I2C_TIMING_SAMPLE_COUNT_MASK) << 6 | | 
 | 				(l_step_cnt & I2C_TIMING_STEP_DIV_MASK) << 0; | 
 | 		} | 
 | 		/* Disable the high speed transaction */ | 
 | 		i2c->high_speed_reg = I2C_TIME_CLR_VALUE; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | #ifdef I2C_DEBUG_FS | 
 | void i2c_dump_info1(struct mt_i2c *i2c) | 
 | { | 
 | 	if (i2c->ext_data.isEnable && i2c->ext_data.timing) | 
 | 		dev_info(i2c->dev, "I2C structure:\nspeed %d\n", | 
 | 			i2c->ext_data.timing); | 
 | 	else | 
 | 		dev_info(i2c->dev, "I2C structure:\nspeed %d\n", | 
 | 			i2c->speed_hz); | 
 | 	dev_info(i2c->dev, "I2C structure:\nOp %x\n", i2c->op); | 
 | 	dev_info(i2c->dev, | 
 | 		"I2C structure:\nData_size %x\nIrq_stat %x\nTrans_stop %d\n", | 
 | 		i2c->msg_len, i2c->irq_stat, i2c->trans_stop); | 
 | 	dev_info(i2c->dev, "base address %p\n", i2c->base); | 
 | 	dev_info(i2c->dev, | 
 | 		"I2C register:\nSLAVE_ADDR %x\nINTR_MASK %x\n", | 
 | 		(i2c_readw(i2c, OFFSET_SLAVE_ADDR)), | 
 | 		(i2c_readw(i2c, OFFSET_INTR_MASK))); | 
 | 	dev_info(i2c->dev, | 
 | 		"I2C register:\nINTR_STAT %x\nCONTROL %x\n", | 
 | 		(i2c_readw(i2c, OFFSET_INTR_STAT)), | 
 | 		(i2c_readw(i2c, OFFSET_CONTROL))); | 
 | 	dev_info(i2c->dev, | 
 | 		"I2C register:\nTRANSFER_LEN %x\nTRANSAC_LEN %x\n", | 
 | 		(i2c_readw(i2c, OFFSET_TRANSFER_LEN)), | 
 | 		(i2c_readw(i2c, OFFSET_TRANSAC_LEN))); | 
 | 	dev_info(i2c->dev, | 
 | 		"I2C register:\nDELAY_LEN %x\nTIMING %x\n", | 
 | 		(i2c_readw(i2c, OFFSET_DELAY_LEN)), | 
 | 		(i2c_readw(i2c, OFFSET_TIMING))); | 
 | 	dev_info(i2c->dev, | 
 | 		"I2C register:\nSTART %x\nFIFO_STAT %x\n", | 
 | 		(i2c_readw(i2c, OFFSET_START)), | 
 | 		(i2c_readw(i2c, OFFSET_FIFO_STAT))); | 
 | 	dev_info(i2c->dev, | 
 | 		"I2C register:\nIO_CONFIG %x\nHS %x\n", | 
 | 		(i2c_readw(i2c, OFFSET_IO_CONFIG)), | 
 | 		(i2c_readw(i2c, OFFSET_HS))); | 
 | 	dev_info(i2c->dev, | 
 | 		"I2C register:\nDEBUGSTAT %x\nEXT_CONF %x\nPATH_DIR %x\n", | 
 | 		(i2c_readw(i2c, OFFSET_DEBUGSTAT)), | 
 | 		(i2c_readw(i2c, OFFSET_EXT_CONF)), | 
 | 		(i2c_readw(i2c, OFFSET_PATH_DIR))); | 
 | } | 
 |  | 
 | void i2c_dump_info(struct mt_i2c *i2c) | 
 | { | 
 | 	/* I2CFUC(); */ | 
 | 	/* int val=0; */ | 
 | 	pr_info_ratelimited("%s: +++++++++++++++++++\n", __func__); | 
 | 	pr_info_ratelimited("I2C structure:\n" | 
 | 	       I2CTAG "Clk=%ld,Id=%d,Op=0x%x,Irq_stat=0x%x,Total_len=0x%x\n" | 
 | 	       I2CTAG "Trans_len=0x%x,Trans_num=0x%x,Trans_auxlen=0x%x,\n" | 
 | 	       I2CTAG "speed=%d,Trans_stop=%u,cg_cnt=%d,hs_only=%d,\n" | 
 | 	       I2CTAG "ch_offset=0x%x,ch_offset_default=0x%x\n", | 
 | 	       i2c->main_clk, i2c->id, i2c->op, i2c->irq_stat, i2c->total_len, | 
 | 			i2c->msg_len, 1, i2c->msg_aux_len, i2c->speed_hz, | 
 | 			i2c->trans_stop, i2c->cg_cnt, | 
 | 			i2c->hs_only, i2c->ch_offset, i2c->ch_offset_default); | 
 |  | 
 | 	pr_info_ratelimited("base addr:0x%p\n", i2c->base); | 
 | 	pr_info_ratelimited("I2C register:\n" | 
 | 	       I2CTAG "SLAVE_ADDR=0x%x,INTR_MASK=0x%x,INTR_STAT=0x%x,\n" | 
 | 	       I2CTAG "CONTROL=0x%x,TRANSFER_LEN=0x%x,TRANSAC_LEN=0x%x,\n" | 
 | 	       I2CTAG "DELAY_LEN=0x%x,TIMING=0x%x,LTIMING=0x%x,START=0x%x\n" | 
 | 	       I2CTAG "FIFO_STAT=0x%x,IO_CONFIG=0x%x,HS=0x%x\n" | 
 | 	       I2CTAG "DCM_EN=0x%x,DEBUGSTAT=0x%x,EXT_CONF=0x%x\n" | 
 | 	       I2CTAG "TRANSFER_LEN_AUX=0x%x,OFFSET_DMA_FSM_DEBUG=0x%x\n" | 
 | 	       I2CTAG "OFFSET_MCU_INTR=0x%x,OFFSET_CLOCK_DIV=0x%x\n", | 
 | 	       (i2c_readw(i2c, OFFSET_SLAVE_ADDR)), | 
 | 	       (i2c_readw(i2c, OFFSET_INTR_MASK)), | 
 | 	       (i2c_readw(i2c, OFFSET_INTR_STAT)), | 
 | 	       (i2c_readw(i2c, OFFSET_CONTROL)), | 
 | 	       (i2c_readw(i2c, OFFSET_TRANSFER_LEN)), | 
 | 	       (i2c_readw(i2c, OFFSET_TRANSAC_LEN)), | 
 | 	       (i2c_readw(i2c, OFFSET_DELAY_LEN)), | 
 | 	       (i2c_readw(i2c, OFFSET_TIMING)), | 
 | 	       (i2c_readw(i2c, OFFSET_LTIMING)), | 
 | 	       (i2c_readw(i2c, OFFSET_START)), | 
 | 	       (i2c_readw(i2c, OFFSET_FIFO_STAT)), | 
 | 	       (i2c_readw(i2c, OFFSET_IO_CONFIG)), | 
 | 	       (i2c_readw(i2c, OFFSET_HS)), | 
 | 	       (i2c_readw(i2c, OFFSET_DCM_EN)), | 
 | 	       (i2c_readw(i2c, OFFSET_DEBUGSTAT)), | 
 | 	       (i2c_readw(i2c, OFFSET_EXT_CONF)), | 
 | 	       (i2c_readw(i2c, OFFSET_TRANSFER_LEN_AUX)), | 
 | 	       (i2c_readw(i2c, OFFSET_DMA_FSM_DEBUG)), | 
 | 	       (i2c_readw(i2c, OFFSET_MCU_INTR)), | 
 | 	       (i2c_readw(i2c, OFFSET_CLOCK_DIV))); | 
 |  | 
 | 	pr_info_ratelimited("before enable DMA register(0x%lx):\n" | 
 | 	       I2CTAG "INT_FLAG=0x%x,INT_EN=0x%x,EN=0x%x,RST=0x%x,\n" | 
 | 	       I2CTAG "STOP=0x%x,FLUSH=0x%x,CON=0x%x,\n" | 
 | 	       I2CTAG "TX_MEM_ADDR=0x%x, RX_MEM_ADDR=0x%x\n" | 
 | 	       I2CTAG "TX_LEN=0x%x,RX_LEN=0x%x,INT_BUF_SIZE=0x%x,\n" | 
 | 	       I2CTAG "DEBUGSTA=0x%x,TX_MEM_ADDR2=0x%x, RX_MEM_ADDR2=0x%x\n", | 
 | 	       g_dma_regs[i2c->id].base, | 
 | 	       g_dma_regs[i2c->id].int_flag, | 
 | 	       g_dma_regs[i2c->id].int_en, | 
 | 	       g_dma_regs[i2c->id].en, | 
 | 	       g_dma_regs[i2c->id].rst, | 
 | 	       g_dma_regs[i2c->id].stop, | 
 | 	       g_dma_regs[i2c->id].flush, | 
 | 	       g_dma_regs[i2c->id].con, | 
 | 	       g_dma_regs[i2c->id].tx_mem_addr, | 
 | 	       g_dma_regs[i2c->id].rx_mem_addr, | 
 | 	       g_dma_regs[i2c->id].tx_len, | 
 | 	       g_dma_regs[i2c->id].rx_len, | 
 | 	       g_dma_regs[i2c->id].int_buf_size, g_dma_regs[i2c->id].debug_sta, | 
 | 	       g_dma_regs[i2c->id].tx_mem_addr2, | 
 | 	       g_dma_regs[i2c->id].rx_mem_addr2); | 
 | 	pr_info_ratelimited("DMA register(0x%p):\n" | 
 | 	       I2CTAG "INT_FLAG=0x%x,INT_EN=0x%x,EN=0x%x,RST=0x%x,\n" | 
 | 	       I2CTAG "STOP=0x%x,FLUSH=0x%x,CON=0x%x,\n" | 
 | 	       I2CTAG "TX_MEM_ADDR=0x%x, RX_MEM_ADDR=0x%x,\n" | 
 | 	       I2CTAG "TX_LEN=0x%x,RX_LEN=x%x,INT_BUF_SIZE=0x%x,\n" | 
 | 	       I2CTAG "DEBUGSTA=0x%x,TX_MEM_ADDR2=0x%x, RX_MEM_ADDR2=0x%x\n", | 
 | 	       i2c->pdmabase, | 
 | 	       (i2c_readl_dma(i2c, OFFSET_INT_FLAG)), | 
 | 	       (i2c_readl_dma(i2c, OFFSET_INT_EN)), | 
 | 	       (i2c_readl_dma(i2c, OFFSET_EN)), | 
 | 	       (i2c_readl_dma(i2c, OFFSET_RST)), | 
 | 	       (i2c_readl_dma(i2c, OFFSET_STOP)), | 
 | 	       (i2c_readl_dma(i2c, OFFSET_FLUSH)), | 
 | 	       (i2c_readl_dma(i2c, OFFSET_CON)), | 
 | 	       (i2c_readl_dma(i2c, OFFSET_TX_MEM_ADDR)), | 
 | 	       (i2c_readl_dma(i2c, OFFSET_RX_MEM_ADDR)), | 
 | 	       (i2c_readl_dma(i2c, OFFSET_TX_LEN)), | 
 | 	       (i2c_readl_dma(i2c, OFFSET_RX_LEN)), | 
 | 	       (i2c_readl_dma(i2c, OFFSET_INT_BUF_SIZE)), | 
 | 	       (i2c_readl_dma(i2c, OFFSET_DEBUG_STA)), | 
 | 	       (i2c_readl_dma(i2c, OFFSET_TX_MEM_ADDR2)), | 
 | 	       (i2c_readl_dma(i2c, OFFSET_RX_MEM_ADDR2))); | 
 | 	pr_info_ratelimited("%s: -----------------------\n", __func__); | 
 |  | 
 | 	dump_i2c_info(i2c); | 
 | 	if (i2c->ccu_offset) { | 
 | 		dev_info(i2c->dev, "I2C CCU register:\n" | 
 | 		I2CTAG "SLAVE_ADDR=0x%x,INTR_MASK=0x%x,\n" | 
 | 		I2CTAG "INTR_STAT=0x%x,CONTROL=0x%x,\n" | 
 | 		I2CTAG "TRANSFER_LEN=0x%x, TRANSAC_LEN=0x%x,DELAY_LEN=0x%x\n" | 
 | 		I2CTAG "TIMING=0x%x,LTIMING=0x%x,START=0x%x,FIFO_STAT=0x%x,\n" | 
 | 		I2CTAG "IO_CONFIG=0x%x,HS=0x%x,DCM_EN=0x%x,DEBUGSTAT=0x%x,\n" | 
 | 		I2CTAG "EXT_CONF=0x%x,TRANSFER_LEN_AUX=0x%x\n" | 
 | 		I2CTAG "OFFSET_DMA_FSM_DEBUG=0x%x,OFFSET_MCU_INTR=0x%x\n", | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_SLAVE_ADDR)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_INTR_MASK)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_INTR_STAT)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_CONTROL)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_TRANSFER_LEN)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_TRANSAC_LEN)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_DELAY_LEN)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_TIMING)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_LTIMING)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_START)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_FIFO_STAT)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_IO_CONFIG)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_HS)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_DCM_EN)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_DEBUGSTAT)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_EXT_CONF)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_TRANSFER_LEN_AUX)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_DMA_FSM_DEBUG)), | 
 | 		(raw_i2c_readw(i2c, i2c->ccu_offset, OFFSET_MCU_INTR))); | 
 | 	} | 
 | } | 
 | #else | 
 | void i2c_dump_info(struct mt_i2c *i2c) | 
 | { | 
 | } | 
 | #endif | 
 |  | 
 | void i2c_gpio_dump_info(struct mt_i2c *i2c) | 
 | { | 
 | 	if (i2c->gpiobase) { | 
 | 		dev_info(i2c->dev, "%s +++++++++++++++++++\n", __func__); | 
 | 		/* gpio_dump_regs_range(i2c->scl_gpio_id, i2c->sda_gpio_id); */ | 
 | 		dev_info(i2c->dev, "I2C gpio structure:\n" | 
 | 		       I2CTAG "EH_CFG=0x%x,PU_CFG=0x%x,RSEL_CFG=0x%x\n", | 
 | 		       readl(i2c->gpiobase + i2c->offset_eh_cfg), | 
 | 		       readl(i2c->gpiobase + i2c->offset_pu_cfg), | 
 | 		       readl(i2c->gpiobase + i2c->offset_rsel_cfg)); | 
 | 	} else | 
 | 		dev_info(i2c->dev, "i2c gpiobase is NULL\n"); | 
 | } | 
 |  | 
 | void dump_i2c_status(int id) | 
 | { | 
 | 	if (id >= I2C_MAX_CHANNEL) { | 
 | 		pr_info("error %s, id = %d\n", __func__, id); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (!g_mt_i2c[id]) { | 
 | 		pr_info("error %s, g_mt_i2c[%d] == NULL\n", __func__, id); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	dump_cg_regs(g_mt_i2c[id]); | 
 | 	(void)mt_i2c_clock_enable(g_mt_i2c[id]); | 
 | 	i2c_dump_info(g_mt_i2c[id]); | 
 | 	mt_i2c_clock_disable(g_mt_i2c[id]); | 
 | } | 
 | EXPORT_SYMBOL(dump_i2c_status); | 
 |  | 
 | static int mt_i2c_do_transfer(struct mt_i2c *i2c) | 
 | { | 
 | 	u16 addr_reg = 0; | 
 | 	u16 control_reg = 0; | 
 | 	u16 ioconfig_reg = 0; | 
 | 	u16 start_reg = 0; | 
 | 	u16 int_reg = 0; | 
 | 	int tmo = i2c->adap.timeout; | 
 | 	unsigned int speed_hz = 0; | 
 | 	bool isDMA = false; | 
 | 	int data_size = 0; | 
 | 	u8 *ptr; | 
 | 	int ret = 0; | 
 | 	/* u16 ch_offset; */ | 
 |  | 
 | 	i2c->trans_stop = false; | 
 | 	i2c->irq_stat = 0; | 
 | 	if (i2c->total_len > 8 || i2c->msg_aux_len > 8) | 
 | 		isDMA = true; | 
 | 	if (i2c->ext_data.isEnable && i2c->ext_data.timing) | 
 | 		speed_hz = i2c->ext_data.timing; | 
 | 	else | 
 | 		speed_hz = i2c->speed_hz; | 
 | 	if (i2c->ext_data.is_ch_offset) { | 
 | 		i2c->ch_offset = i2c->ext_data.ch_offset; | 
 | 		i2c->ch_offset_dma = i2c->ext_data.ch_offset_dma; | 
 | 		if (i2c->ext_data.ch_offset == 0) { | 
 | 			dev_info(i2c->dev, "Wrong channel offset for multi-channel\n"); | 
 | 			i2c->ch_offset = i2c->ccu_offset; | 
 | 		} | 
 | 	} else { | 
 | 		i2c->ch_offset = i2c->ch_offset_default; | 
 | 		i2c->ch_offset_dma = i2c->ch_offset_dma_default; | 
 | 	} | 
 |  | 
 | #if defined(CONFIG_ARCH_MT6765) | 
 | 	i2c_writel(i2c, OFFSET_DEBUGCTRL, 0x28); | 
 | #endif | 
 | #if !defined(CONFIG_MT_I2C_FPGA_ENABLE) | 
 | 	ret = i2c_set_speed(i2c, | 
 | 		clk_get_rate(i2c->clk_main) / i2c->clk_src_div); | 
 | #else | 
 | 	ret = i2c_set_speed(i2c, I2C_CLK_RATE); | 
 | #endif | 
 | 	if (ret) { | 
 | 		dev_info(i2c->dev, "Failed to set the speed\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if ((i2c->dev_comp->ver == 0x2) && i2c->ltiming_reg) { | 
 | 		u32 tv1, tv2, tv; | 
 | #if !defined(CONFIG_MT_I2C_FPGA_ENABLE) | 
 | 		tv1 = (clk_get_rate(i2c->clk_main) / i2c->clk_src_div) / 1000; | 
 | #else | 
 | 		tv1 = I2C_CLK_RATE / 1000; | 
 | #endif | 
 | 		tv1 = tv1 * MAX_SCL_LOW_TIME; | 
 | 		tv2 = (((i2c->ltiming_reg & LSTEP_MSK) + 1) * | 
 | 		      (((i2c->ltiming_reg & LSAMPLE_MSK) >> 6) + 1)); | 
 | 		tv = DIV_ROUND_UP(tv1, tv2); | 
 | 		i2c_writew(tv & 0xFFFF, i2c, OFFSET_HW_TIMEOUT); | 
 | 		/* dev_info(i2c->dev, "scl time out value %04X\n", */ | 
 | 		/*	    (u16)(tv & 0xFFFF));		   */ | 
 | 	} | 
 | 	if (i2c->dev_comp->set_dt_div) { | 
 | 		if (i2c->clk_src_div > MAX_CLOCK_DIV) { | 
 | 			dev_info(i2c->dev, "Clock div error\n"); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 		i2c_writew(((i2c->clk_src_div - 1) << 8) + | 
 | 			(i2c->clk_src_div - 1), | 
 | 			i2c, OFFSET_CLOCK_DIV); | 
 | 	} | 
 |  | 
 | 	/* If use i2c pin from PMIC mt6397 side, need set PATH_DIR first */ | 
 | 	if (i2c->have_pmic) | 
 | 		i2c_writew(I2C_CONTROL_WRAPPER, i2c, OFFSET_PATH_DIR); | 
 | 	if (speed_hz > 400000) | 
 | 		control_reg = I2C_CONTROL_ACKERR_DET_EN; | 
 | 	else | 
 | 		control_reg = I2C_CONTROL_ACKERR_DET_EN | | 
 | 			I2C_CONTROL_CLK_EXT_EN; | 
 | 	if (isDMA == true) /* DMA */ | 
 | 		control_reg |= | 
 | 			I2C_CONTROL_DMA_EN | | 
 | 			I2C_CONTROL_DMAACK_EN | | 
 | 			I2C_CONTROL_ASYNC_MODE; | 
 |  | 
 | 	if (speed_hz > 400000) | 
 | 		control_reg |= I2C_CONTROL_RS; | 
 | 	if (i2c->op == I2C_MASTER_WRRD) | 
 | 		control_reg |= I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS; | 
 | 	i2c_writew(control_reg, i2c, OFFSET_CONTROL); | 
 |  | 
 | 	/* set start condition */ | 
 | 	if (speed_hz <= 100000) | 
 | 		i2c_writew(I2C_ST_START_CON, i2c, OFFSET_EXT_CONF); | 
 | 	else { | 
 | 		if (i2c->dev_comp->ext_time_config != 0) | 
 | 			i2c_writew(i2c->dev_comp->ext_time_config, | 
 | 			i2c, OFFSET_EXT_CONF); | 
 | 		else | 
 | 			i2c_writew(I2C_FS_START_CON, i2c, OFFSET_EXT_CONF); | 
 | 	} | 
 |  | 
 | 	/* delay 5 scl_clk time between two transaction */ | 
 | 	/* if (~control_reg & I2C_CONTROL_RS) */ | 
 | 	i2c_writew(I2C_DELAY_LEN, i2c, OFFSET_DELAY_LEN); | 
 |  | 
 | 	/* Set ioconfig */ | 
 | 	if (i2c->use_push_pull) { | 
 | 		ioconfig_reg = I2C_IO_CONFIG_PUSH_PULL; | 
 | 	} else { | 
 | 		ioconfig_reg = I2C_IO_CONFIG_OPEN_DRAIN; | 
 | 		if (i2c->dev_comp->set_aed) | 
 | 			ioconfig_reg |= ((i2c->aed<<4) & | 
 | 					I2C_IO_CONFIG_AED_MASK); | 
 | 	} | 
 | 	i2c_writew(ioconfig_reg, i2c, OFFSET_IO_CONFIG); | 
 |  | 
 | 	/* set i3c high speed master code */ | 
 | 	i2c->i3c_en = (i2c_readw(i2c, OFFSET_DMA_FSM_DEBUG)) & I3C_EN; | 
 | 	if (i2c->i3c_en && (i2c->speed_hz > MAX_FS_PLUS_MODE_SPEED) | 
 | 		&& (!i2c->hs_only)) { | 
 | 		i2c_writew(I2C_HFIFO_ADDR_CLR, i2c, OFFSET_FIFO_ADDR_CLR); | 
 | 		i2c_writew(I3C_UNLOCK_HFIFO | I3C_NINTH_BIT | MASTER_CODE, | 
 | 			i2c, OFFSET_HFIFO_DATA); | 
 | 	} | 
 |  | 
 | 	if (i2c->dev_comp->ver != 0x2) | 
 | 		i2c_writew(i2c->timing_reg, i2c, OFFSET_TIMING); | 
 | 	else | 
 | 		i2c_writew(i2c->timing_reg | I2C_TIMEOUT_EN, | 
 | 			i2c, OFFSET_TIMING); | 
 | 	if (i2c->dev_comp->set_ltiming) | 
 | 		i2c_writew(i2c->ltiming_reg, i2c, OFFSET_LTIMING); | 
 | 	i2c_writew(i2c->high_speed_reg, i2c, OFFSET_HS); | 
 |  | 
 | 	if (i2c->have_dcm) | 
 | 		i2c_writew(I2C_DCM_ENABLE, i2c, OFFSET_DCM_EN); | 
 |  | 
 | 	addr_reg = i2c->addr << 1; | 
 | 	if (i2c->op == I2C_MASTER_RD) | 
 | 		addr_reg |= 0x1; | 
 | 	i2c_writew(addr_reg, i2c, OFFSET_SLAVE_ADDR); | 
 | 	int_reg = I2C_HS_NACKERR | I2C_ACKERR | | 
 | 		  I2C_TRANSAC_COMP | I2C_ARB_LOST; | 
 | 	if (i2c->dev_comp->ver == 0x2) | 
 | 		int_reg |= I2C_BUS_ERR | I2C_TIMEOUT; | 
 | 	if (i2c->ch_offset) | 
 | 		int_reg &= ~(I2C_HS_NACKERR | I2C_ACKERR); | 
 | 	/* Clear interrupt status */ | 
 | 	i2c_writew(I2C_INTR_ALL, i2c, OFFSET_INTR_STAT); | 
 | 	if (i2c->ch_offset != 0) | 
 | 		i2c_writew(I2C_FIFO_ADDR_CLR_MCH | I2C_FIFO_ADDR_CLR, | 
 | 			   i2c, OFFSET_FIFO_ADDR_CLR); | 
 | 	else | 
 | 		i2c_writew(I2C_FIFO_ADDR_CLR, i2c, OFFSET_FIFO_ADDR_CLR); | 
 | 	/* Enable interrupt */ | 
 | 	i2c_writew(int_reg, i2c, OFFSET_INTR_MASK); | 
 |  | 
 | 	/* Set transfer and transaction len */ | 
 | 	if (i2c->op == I2C_MASTER_WRRD) { | 
 | 		if ((i2c->appm) && (i2c->dev_comp->idvfs_i2c)) { | 
 | 			i2c_writew( | 
 | 				(i2c->msg_len & 0xFF) | | 
 | 				((i2c->msg_aux_len<<8) & 0x1F00), | 
 | 				i2c, OFFSET_TRANSFER_LEN); | 
 | 		} else { | 
 | 			i2c_writew(i2c->msg_len, i2c, | 
 | 				OFFSET_TRANSFER_LEN); | 
 | 			i2c_writew(i2c->msg_aux_len, i2c, | 
 | 				OFFSET_TRANSFER_LEN_AUX); | 
 | 		} | 
 | 		i2c_writew(0x02, i2c, OFFSET_TRANSAC_LEN); | 
 | 	} else if (i2c->op == I2C_MASTER_MULTI_WR) { | 
 | 		i2c_writew(i2c->msg_len, i2c, OFFSET_TRANSFER_LEN); | 
 | 		i2c_writew(i2c->total_len / i2c->msg_len, | 
 | 			i2c, OFFSET_TRANSAC_LEN); | 
 | 	} else { | 
 | 		i2c_writew(i2c->msg_len, i2c, OFFSET_TRANSFER_LEN); | 
 | 		i2c_writew(0x01, i2c, OFFSET_TRANSAC_LEN); | 
 | 	} | 
 |  | 
 | 	/* Prepare buffer data to start transfer */ | 
 | 	if (isDMA == true && (!i2c->is_ccu_trig)) { | 
 | #ifdef CONFIG_MTK_LM_MODE | 
 | 		if ((i2c->dev_comp->dma_support == 1) && (enable_4G())) { | 
 | 			i2c_writel_dma(0x1, i2c, OFFSET_TX_MEM_ADDR2); | 
 | 			i2c_writel_dma(0x1, i2c, OFFSET_RX_MEM_ADDR2); | 
 | 		} | 
 | #endif | 
 | 		if (i2c->op == I2C_MASTER_RD) { | 
 | 			i2c_writel_dma(I2C_DMA_INT_FLAG_NONE, | 
 | 				i2c, OFFSET_INT_FLAG); | 
 | 			i2c_writel_dma(I2C_DMA_CON_RX, i2c, OFFSET_CON); | 
 | 			i2c_writel_dma( | 
 | 				lower_32_bits(i2c->dma_buf.paddr), | 
 | 				i2c, OFFSET_RX_MEM_ADDR); | 
 | 			if ((i2c->dev_comp->dma_support >= 2)) | 
 | 				i2c_writel_dma( | 
 | 					upper_32_bits(i2c->dma_buf.paddr), | 
 | 					i2c, OFFSET_RX_MEM_ADDR2); | 
 | 			i2c_writel_dma(i2c->msg_len, i2c, OFFSET_RX_LEN); | 
 | 		} else if (i2c->op == I2C_MASTER_WR || | 
 | 				i2c->op == I2C_MASTER_MULTI_WR) { | 
 | 			i2c_writel_dma(I2C_DMA_INT_FLAG_NONE, | 
 | 				i2c, OFFSET_INT_FLAG); | 
 | 			i2c_writel_dma(I2C_DMA_CON_TX, i2c, OFFSET_CON); | 
 | 			i2c_writel_dma( | 
 | 				lower_32_bits(i2c->dma_buf.paddr), | 
 | 				i2c, OFFSET_TX_MEM_ADDR); | 
 | 			if ((i2c->dev_comp->dma_support >= 2)) | 
 | 				i2c_writel_dma( | 
 | 				upper_32_bits(i2c->dma_buf.paddr), | 
 | 				i2c, OFFSET_TX_MEM_ADDR2); | 
 |  | 
 | 			i2c_writel_dma(i2c->total_len, i2c, OFFSET_TX_LEN); | 
 | 		} else { | 
 | 			i2c_writel_dma(0x0000, i2c, OFFSET_INT_FLAG); | 
 | 			i2c_writel_dma(0x0000, i2c, OFFSET_CON); | 
 | 			i2c_writel_dma(lower_32_bits(i2c->dma_buf.paddr), | 
 | 				i2c, OFFSET_TX_MEM_ADDR); | 
 | 			i2c_writel_dma(lower_32_bits(i2c->dma_buf.paddr), | 
 | 				i2c, OFFSET_RX_MEM_ADDR); | 
 | 			if ((i2c->dev_comp->dma_support >= 2)) { | 
 | 				i2c_writel_dma( | 
 | 					upper_32_bits(i2c->dma_buf.paddr), | 
 | 					i2c, OFFSET_TX_MEM_ADDR2); | 
 | 				i2c_writel_dma( | 
 | 					upper_32_bits(i2c->dma_buf.paddr), | 
 | 					i2c, OFFSET_RX_MEM_ADDR2); | 
 | 			} | 
 | 			i2c_writel_dma(i2c->msg_len, i2c, OFFSET_TX_LEN); | 
 | 			i2c_writel_dma(i2c->msg_aux_len, i2c, OFFSET_RX_LEN); | 
 | 		} | 
 | 		record_i2c_dma_info(i2c); | 
 | 		/* flush before sending DMA start */ | 
 | 		mb(); | 
 | 		i2c_writel_dma(I2C_DMA_START_EN, i2c, OFFSET_EN); | 
 | 	} else { | 
 | 		if (i2c->op != I2C_MASTER_RD && (!i2c->is_ccu_trig)) { | 
 | 			data_size = i2c->total_len; | 
 | 			ptr = i2c->dma_buf.vaddr; | 
 | 			while (data_size--) { | 
 | 				i2c_writew(*ptr, i2c, OFFSET_DATA_PORT); | 
 | 				ptr++; | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	if (i2c->dev_comp->ver == 0x2) { | 
 | 		if (!i2c->is_ccu_trig) | 
 | 			i2c_writew(I2C_MCU_INTR_EN, i2c, OFFSET_MCU_INTR); | 
 | 		else { | 
 | 			dev_info(i2c->dev, "I2C CCU trig.\n"); | 
 | 			return 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* flush before sending start */ | 
 | 	mb(); | 
 | 	if (!i2c->is_hw_trig) | 
 | 		i2c_writew(I2C_TRANSAC_START, i2c, OFFSET_START); | 
 | 	else { | 
 | 		dev_info(i2c->dev, "I2C hw trig.\n"); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	tmo = wait_event_timeout(i2c->wait, i2c->trans_stop, tmo); | 
 |  | 
 | 	record_i2c_info(i2c, tmo); | 
 |  | 
 | 	if (tmo == 0) { | 
 | 		dev_info(i2c->dev, "addr:0x%x,transfer timeout\n", | 
 | 			i2c->addr); | 
 | 		start_reg = i2c_readw(i2c, OFFSET_START); | 
 | 		dev_info(i2c->dev, | 
 | 			"timeout:start=0x%x,ch_err=0x%x\n", | 
 | 			start_reg, i2c_readw(i2c, OFFSET_ERROR)); | 
 |  | 
 | 		i2c_dump_info(i2c); | 
 | 		i2c_gpio_dump_info(i2c); | 
 | 		#if defined(CONFIG_MTK_GIC_EXT) | 
 | 		mt_irq_dump_status(i2c->irqnr); | 
 | 		#endif | 
 | 		dump_cg_regs(i2c); | 
 | 		if (i2c->ch_offset != 0) | 
 | 			i2c_writew(I2C_FIFO_ADDR_CLR_MCH | I2C_FIFO_ADDR_CLR, | 
 | 				   i2c, OFFSET_FIFO_ADDR_CLR); | 
 | 		else | 
 | 			i2c_writew(I2C_FIFO_ADDR_CLR, i2c, | 
 | 				   OFFSET_FIFO_ADDR_CLR); | 
 |  | 
 | 		/* This slave addr is used to check whether the shadow RG is */ | 
 | 		/* mapped normally or not */ | 
 | 		dev_info(i2c->dev, "SLAVE_ADDR=0x%x (shadow RG)", | 
 | 			i2c_readw_shadow(i2c, OFFSET_SLAVE_ADDR)); | 
 | 		mt_i2c_init_hw(i2c); | 
 | 		if ((i2c->ch_offset) && (start_reg & I2C_RESUME_ARBIT)) { | 
 | 			i2c_writew_shadow(I2C_RESUME_ARBIT, i2c, OFFSET_START); | 
 | 			dev_info(i2c->dev, "bus channel transferred\n"); | 
 | 		} | 
 |  | 
 | 		if (start_reg & I2C_TRANSAC_START) { | 
 | 			dev_info(i2c->dev, "bus tied low/high(0x%x)\n", | 
 | 				start_reg); | 
 | 			return -EIO; | 
 | 		} | 
 | 		return -ETIMEDOUT; | 
 | 	} | 
 | 	if (i2c->irq_stat & (I2C_HS_NACKERR | I2C_ACKERR | | 
 | 	    I2C_TIMEOUT | I2C_BUS_ERR | I2C_IBI)) { | 
 | 		dev_info(i2c->dev, | 
 | 			"error:addr=0x%x,irq_stat=0x%x,ch_offset=0x%x,mask:0x%x\n", | 
 | 			i2c->addr, i2c->irq_stat, i2c->ch_offset, int_reg); | 
 |  | 
 | 		/* clear fifo addr:bit2,multi-chn;bit0,normal */ | 
 | 		i2c_writew(I2C_FIFO_ADDR_CLR_MCH | I2C_FIFO_ADDR_CLR, | 
 | 			i2c, OFFSET_FIFO_ADDR_CLR); | 
 |  | 
 | 		if (i2c->ext_data.isEnable ==  false || | 
 | 			i2c->ext_data.isFilterMsg == false) { | 
 | 			i2c_dump_info(i2c); | 
 | 			i2c_gpio_dump_info(i2c); | 
 | 		} else | 
 | 			dev_info(i2c->dev, "addr:0x%x,ext_data skip more log\n", | 
 | 				i2c->addr); | 
 |  | 
 | 		if ((i2c->irq_stat & (I2C_HS_NACKERR | I2C_ACKERR))) | 
 | 			dev_info(i2c->dev, "addr:0x%x,ACK error\n", i2c->addr); | 
 |  | 
 | 		if (i2c->irq_stat & I2C_TIMEOUT) | 
 | 			dev_info(i2c->dev, "addr:0x%x,SCL tied low timeout error\n", | 
 | 				i2c->addr); | 
 |  | 
 | 		if ((i2c->irq_stat & I2C_BUS_ERR)) | 
 | 			dev_info(i2c->dev, | 
 | 				"bus error:start=0x%x,ch_err=0x%x,dbg_stat=0x%x\n", | 
 | 				i2c_readw(i2c, OFFSET_START), | 
 | 				i2c_readw(i2c, OFFSET_ERROR), | 
 | 				i2c_readw(i2c, OFFSET_DEBUGSTAT)); | 
 |  | 
 | 		if ((i2c->irq_stat & I2C_IBI)) { | 
 | 			dev_info(i2c->dev, | 
 | 				"IBI error:start=0x%x,ch_err=0x%x,dbg_stat=0x%x\n", | 
 | 				i2c_readw(i2c, OFFSET_START), | 
 | 				i2c_readw(i2c, OFFSET_ERROR), | 
 | 				i2c_readw(i2c, OFFSET_DEBUGSTAT)); | 
 | 		} | 
 |  | 
 | 		if ((i2c->irq_stat & I2C_TRANSAC_COMP) && i2c->ch_offset && | 
 | 		    (!(i2c->irq_stat & I2C_BUS_ERR))) { | 
 | 			dev_info(i2c->dev, "trans done with error"); | 
 | 			return -EREMOTEIO; | 
 | 		} | 
 |  | 
 | 		/* Need init&kick if (intr_state&intr_mask) is greater than 1 */ | 
 | 		if ((i2c->irq_stat & int_reg) > 1) { | 
 | 			mt_i2c_init_hw(i2c); | 
 | 			if (i2c->ch_offset) { | 
 | 				i2c_writew_shadow(I2C_RESUME_ARBIT, | 
 | 					i2c, OFFSET_START); | 
 | 				dev_info(i2c->dev, "bus channel transferred\n"); | 
 | 			} | 
 | 		} | 
 | 		return -EREMOTEIO; | 
 | 	} | 
 | 	if (i2c->op != I2C_MASTER_WR && isDMA == false) { | 
 | 		if (i2c->op == I2C_MASTER_WRRD) | 
 | 			data_size = i2c->msg_aux_len; | 
 | 		else | 
 | 			data_size = i2c->msg_len; | 
 | 		ptr = i2c->dma_buf.vaddr; | 
 | 		while (data_size--) { | 
 | 			*ptr = i2c_readw(i2c, OFFSET_DATA_PORT); | 
 | 			ptr++; | 
 | 		} | 
 | 	} | 
 | 	dev_dbg(i2c->dev, "i2c transferred done.\n"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline void mt_i2c_copy_to_dma(struct mt_i2c *i2c, struct i2c_msg *msg) | 
 | { | 
 | 	/* | 
 | 	 * if the operate is write, write-read, multi-write, | 
 | 	 * need to copy the data to DMA memory. | 
 | 	 */ | 
 | 	if (!(msg->flags & I2C_M_RD)) | 
 | 		memcpy(i2c->dma_buf.vaddr + i2c->total_len - msg->len, | 
 | 			msg->buf, msg->len); | 
 | } | 
 |  | 
 | static inline void mt_i2c_copy_from_dma(struct mt_i2c *i2c, | 
 | 	struct i2c_msg *msg) | 
 | { | 
 | 	/* if the operate is read, need to copy the data from DMA memory */ | 
 | 	if (msg->flags & I2C_M_RD) | 
 | 		memcpy(msg->buf, i2c->dma_buf.vaddr, msg->len); | 
 | } | 
 |  | 
 | /* | 
 |  * In MTK platform the STOP will be issued after each | 
 |  * message was transferred which is not flow the clarify | 
 |  * for i2c_transfer(), several I2C devices tolerate the STOP, | 
 |  * but some device need Repeat-Start and do not compatible with STOP | 
 |  * MTK platform has WRRD mode which can write then read with | 
 |  * Repeat-Start between two message, so we combined two | 
 |  * messages into one transaction. | 
 |  * The max read length is 4096 | 
 |  */ | 
 | static bool mt_i2c_should_combine(struct i2c_msg *msg) | 
 | { | 
 | 	struct i2c_msg *next_msg = msg + 1; | 
 |  | 
 | 	if ((next_msg->len < 4096) && | 
 | 			msg->addr == next_msg->addr && | 
 | 			!(msg->flags & I2C_M_RD) && | 
 | 			(next_msg->flags & I2C_M_RD) == I2C_M_RD) { | 
 | 		return true; | 
 | 	} | 
 | 	return false; | 
 | } | 
 |  | 
 | static bool mt_i2c_should_batch(struct i2c_msg *prev, struct i2c_msg *next) | 
 | { | 
 | 	if ((prev == NULL) || (next == NULL) || | 
 | 	    (prev->flags & I2C_M_RD) || (next->flags & I2C_M_RD)) | 
 | 		return false; | 
 | 	if ((next != NULL) && (prev != NULL) && | 
 | 	    (prev->len == next->len && prev->addr == next->addr)) | 
 | 		return true; | 
 | 	return false; | 
 | } | 
 |  | 
 | static int __mt_i2c_transfer(struct mt_i2c *i2c, | 
 | 	struct i2c_msg msgs[], int num) | 
 | { | 
 | 	int ret; | 
 | 	int left_num = num; | 
 |  | 
 | 	while (left_num--) { | 
 | 		/* In MTK platform the max transfer number is 4096 */ | 
 | 		if (msgs->len > MAX_DMA_TRANS_SIZE) { | 
 | 			dev_dbg(i2c->dev, | 
 | 				" message data length is more than 255\n"); | 
 | 			ret = -EINVAL; | 
 | 			goto err_exit; | 
 | 		} | 
 | 		if (msgs->addr == 0) { | 
 | 			dev_dbg(i2c->dev, " addr is invalid.\n"); | 
 | 			ret = -EINVAL; | 
 | 			goto err_exit; | 
 | 		} | 
 | 		if (msgs->buf == NULL) { | 
 | 			dev_dbg(i2c->dev, " data buffer is NULL.\n"); | 
 | 			ret = -EINVAL; | 
 | 			goto err_exit; | 
 | 		} | 
 |  | 
 | 		i2c->addr = msgs->addr; | 
 | 		i2c->msg_len = msgs->len; | 
 | 		i2c->msg_aux_len = 0; | 
 |  | 
 | 		if ((left_num + 1 == num) || | 
 | 			!mt_i2c_should_batch(msgs - 1, msgs)) { | 
 | 			i2c->total_len = msgs->len; | 
 | 			if (msgs->flags & I2C_M_RD) | 
 | 				i2c->op = I2C_MASTER_RD; | 
 | 			else | 
 | 				i2c->op = I2C_MASTER_WR; | 
 | 		} else { | 
 | 			i2c->total_len += msgs->len; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * always use DMA mode. | 
 | 		 * 1st when write need copy the data of message to dma memory | 
 | 		 * 2nd when read need copy the DMA data to the message buffer. | 
 | 		 * The length should be less than 255. | 
 | 		 */ | 
 | 		mt_i2c_copy_to_dma(i2c, msgs); | 
 |  | 
 | 		if (left_num >= 1) { | 
 | 			if (mt_i2c_should_batch(msgs, msgs + 1)) { | 
 | 				i2c->op = I2C_MASTER_MULTI_WR; | 
 | 				msgs++; | 
 | 				continue; | 
 | 			} | 
 | 			if (mt_i2c_should_combine(msgs)) { | 
 | 				i2c->msg_aux_len = (msgs + 1)->len; | 
 | 				i2c->op = I2C_MASTER_WRRD; | 
 | 				left_num--; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* Use HW semaphore to protect device access between | 
 | 		 * AP and SPM, or SCP | 
 | 		 */ | 
 | 		if (i2c_get_semaphore(i2c) != 0) { | 
 | 			dev_info(i2c->dev, "get hw semaphore failed.\n"); | 
 | 			return -EBUSY; | 
 | 		} | 
 | 		ret = mt_i2c_do_transfer(i2c); | 
 | 		/* Use HW semaphore to protect device access between | 
 | 		 * AP and SPM, or SCP | 
 | 		 */ | 
 | 		if (i2c_release_semaphore(i2c) != 0) { | 
 | 			dev_info(i2c->dev, "release hw semaphore failed.\n"); | 
 | 			ret = -EBUSY; | 
 | 		} | 
 | 		if (ret < 0) | 
 | 			goto err_exit; | 
 | 		if (i2c->op == I2C_MASTER_WRRD) | 
 | 			mt_i2c_copy_from_dma(i2c, msgs + 1); | 
 | 		else | 
 | 			mt_i2c_copy_from_dma(i2c, msgs); | 
 |  | 
 | 		msgs++; | 
 | 		/* after combined two messages so we need ignore one */ | 
 | 		if (left_num > 0 && i2c->op == I2C_MASTER_WRRD) | 
 | 			msgs++; | 
 | 	} | 
 | 	/* the return value is number of executed messages */ | 
 | 	ret = num; | 
 | err_exit: | 
 | 	return ret; | 
 | } | 
 |  | 
 | #ifdef CONFIG_TRUSTONIC_TEE_SUPPORT | 
 | int i2c_tui_enable_clock(int id) | 
 | { | 
 | 	struct i2c_adapter *adap; | 
 | 	struct mt_i2c *i2c; | 
 | 	int ret; | 
 |  | 
 | 	adap = i2c_get_adapter(id); | 
 | 	if (!adap) { | 
 | 		pr_info("Cannot get adapter\n"); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	i2c = i2c_get_adapdata(adap); | 
 | 	ret = clk_prepare_enable(i2c->clk_main); | 
 | 	if (ret) { | 
 | 		pr_info("Cannot enable main clk\n"); | 
 | 		return ret; | 
 | 	} | 
 | 	ret = clk_prepare_enable(i2c->clk_dma); | 
 | 	if (ret) { | 
 | 		pr_info("Cannot enable dma clk\n"); | 
 | 		clk_disable_unprepare(i2c->clk_main); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int i2c_tui_disable_clock(int id) | 
 | { | 
 | 	struct i2c_adapter *adap; | 
 | 	struct mt_i2c *i2c; | 
 |  | 
 | 	adap = i2c_get_adapter(id); | 
 | 	if (!adap) { | 
 | 		pr_info("Cannot get adapter\n"); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	i2c = i2c_get_adapdata(adap); | 
 | 	clk_disable_unprepare(i2c->clk_dma); | 
 | 	clk_disable_unprepare(i2c->clk_main); | 
 |  | 
 | 	return 0; | 
 | } | 
 | #endif | 
 |  | 
 | static int mt_i2c_transfer(struct i2c_adapter *adap, | 
 | 	struct i2c_msg msgs[], int num) | 
 | { | 
 | 	int ret; | 
 | 	struct mt_i2c *i2c = i2c_get_adapdata(adap); | 
 |  | 
 | 	ret = mt_i2c_clock_enable(i2c); | 
 | 	if (ret) | 
 | 		return -EBUSY; | 
 |  | 
 | 	mutex_lock(&i2c->i2c_mutex); | 
 | 	ret = __mt_i2c_transfer(i2c, msgs, num); | 
 | 	mutex_unlock(&i2c->i2c_mutex); | 
 |  | 
 | 	mt_i2c_clock_disable(i2c); | 
 | 	return ret; | 
 | } | 
 |  | 
 |  | 
 | static void mt_i2c_parse_extension(struct mt_i2c_ext *pext, u32 ext_flag, | 
 | 							u32 timing) | 
 | { | 
 | 	if (ext_flag & I2C_A_FILTER_MSG) | 
 | 		pext->isFilterMsg = true; | 
 | 	if (timing) | 
 | 		pext->timing = timing; | 
 | } | 
 |  | 
 | int mtk_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num, | 
 | 					u32 ext_flag, u32 timing) | 
 | { | 
 | 	int ret; | 
 | 	struct mt_i2c *i2c = i2c_get_adapdata(adap); | 
 |  | 
 | 	ret = mt_i2c_clock_enable(i2c); | 
 | 	if (ret) | 
 | 		return -EBUSY; | 
 |  | 
 | 	mutex_lock(&i2c->i2c_mutex); | 
 | 	i2c->ext_data.isEnable = true; | 
 |  | 
 | 	mt_i2c_parse_extension(&i2c->ext_data, ext_flag, timing); | 
 | 	ret = __mt_i2c_transfer(i2c, msgs, num); | 
 |  | 
 | 	i2c->ext_data.isEnable = false; | 
 | 	mutex_unlock(&i2c->i2c_mutex); | 
 |  | 
 | 	mt_i2c_clock_disable(i2c); | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(mtk_i2c_transfer); | 
 |  | 
 | int hw_trig_i2c_enable(struct i2c_adapter *adap) | 
 | { | 
 | 	struct mt_i2c *i2c = i2c_get_adapdata(adap); | 
 |  | 
 | 	if (!i2c->buffermode) | 
 | 		return -1; | 
 | 	if (mt_i2c_clock_enable(i2c)) | 
 | 		return -EBUSY; | 
 |  | 
 | 	mutex_lock(&i2c->i2c_mutex); | 
 | 	i2c->is_hw_trig = true; | 
 | 	mutex_unlock(&i2c->i2c_mutex); | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(hw_trig_i2c_enable); | 
 |  | 
 | int hw_trig_i2c_disable(struct i2c_adapter *adap) | 
 | { | 
 | 	struct mt_i2c *i2c = i2c_get_adapdata(adap); | 
 |  | 
 | 	if (!i2c->buffermode) | 
 | 		return -1; | 
 | 	mutex_lock(&i2c->i2c_mutex); | 
 | 	i2c->is_hw_trig = false; | 
 | 	mutex_unlock(&i2c->i2c_mutex); | 
 | 	mt_i2c_wait_done(i2c, 0); | 
 | 	mt_i2c_clock_disable(i2c); | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(hw_trig_i2c_disable); | 
 |  | 
 | int hw_trig_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, | 
 | 		int num) | 
 | { | 
 | 	int ret; | 
 | 	struct mt_i2c *i2c = i2c_get_adapdata(adap); | 
 |  | 
 | 	if (!i2c->buffermode) | 
 | 		return -1; | 
 | 	mutex_lock(&i2c->i2c_mutex); | 
 | 	ret = __mt_i2c_transfer(i2c, msgs, num); | 
 | 	mutex_unlock(&i2c->i2c_mutex); | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(hw_trig_i2c_transfer); | 
 |  | 
 | int i2c_ccu_enable(struct i2c_adapter *adap, u16 ch_offset) | 
 | { | 
 | 	int ret; | 
 | 	struct mt_i2c *i2c = i2c_get_adapdata(adap); | 
 | 	char buf[1]; | 
 | 	/*This is just a dummy msg which is meaningless since these parameter | 
 | 	 * is actually not used. | 
 | 	 */ | 
 | 	struct i2c_msg dummy_msg = { | 
 | 		.addr = 0x1, | 
 | 		.flags = I2C_MASTER_RD, | 
 | 		.len = 1, | 
 | 		.buf = (char *)buf, | 
 | 	}; | 
 | 	if (mt_i2c_clock_enable(i2c)) | 
 | 		return -EBUSY; | 
 | 	mutex_lock(&i2c->i2c_mutex); | 
 | 	i2c->is_ccu_trig = true; | 
 | 	i2c->ext_data.ch_offset = ch_offset; | 
 | 	i2c->ext_data.is_ch_offset = true; | 
 | 	ret = __mt_i2c_transfer(i2c, &dummy_msg, 1); | 
 | 	i2c->is_ccu_trig = false; | 
 | 	i2c->ext_data.is_ch_offset = false; | 
 | 	mutex_unlock(&i2c->i2c_mutex); | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(i2c_ccu_enable); | 
 |  | 
 | int i2c_ccu_disable(struct i2c_adapter *adap) | 
 | { | 
 | 	struct mt_i2c *i2c = i2c_get_adapdata(adap); | 
 |  | 
 | 	mt_i2c_wait_done(i2c, i2c->ccu_offset); | 
 | 	mt_i2c_clock_disable(i2c); | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(i2c_ccu_disable); | 
 |  | 
 | static irqreturn_t mt_i2c_irq(int irqno, void *dev_id) | 
 | { | 
 | 	struct mt_i2c *i2c = dev_id; | 
 |  | 
 | 	#if 0 | 
 | 	/* Clear interrupt mask */ | 
 | 	i2c_writew(~(I2C_HS_NACKERR | I2C_ACKERR | I2C_TRANSAC_COMP), | 
 | 		i2c, OFFSET_INTR_MASK); | 
 | 	i2c->irq_stat = i2c_readw(i2c, OFFSET_INTR_STAT); | 
 | 	i2c_writew(I2C_HS_NACKERR | I2C_ACKERR | I2C_TRANSAC_COMP, | 
 | 		i2c, OFFSET_INTR_STAT); | 
 | 	#endif | 
 |  | 
 | 	/* mask and clear all interrupt for i2c, need think of i3c~~ */ | 
 | 	i2c_writew(~(I2C_INTR_ALL), i2c, OFFSET_INTR_MASK); | 
 | 	i2c->irq_stat = i2c_readw(i2c, OFFSET_INTR_STAT); | 
 | 	i2c_writew(I2C_INTR_ALL, i2c, OFFSET_INTR_STAT); | 
 | 	i2c->trans_stop = true; | 
 | 	if (!i2c->is_hw_trig) { | 
 | 		wake_up(&i2c->wait); | 
 | 		if (!i2c->irq_stat) { | 
 | 			dev_info(i2c->dev, "addr: 0x%x, irq stat 0\n", | 
 | 				i2c->addr); | 
 |  | 
 | 			i2c_dump_info(i2c); | 
 | 			#if defined(CONFIG_MTK_GIC_EXT) | 
 | 			mt_irq_dump_status(i2c->irqnr); | 
 | 			#endif | 
 | 		} else { | 
 | 			/* for bxx debug start */ | 
 | 			if ((i2c->irq_stat & (I2C_IBI | I2C_BUS_ERR))) { | 
 | 				dev_info(i2c->dev, "[bxx]cg_cnt:%d,irq_stat:0x%x\n", | 
 | 					i2c->cg_cnt, i2c->irq_stat); | 
 | 				dev_info(i2c->dev, "0x84=0x%x\n", | 
 | 					i2c_readw(i2c, OFFSET_ERROR)); | 
 |  | 
 | 				pr_info("[bxx]0xE0=0x%x,0x1E0=0x%x,0x2E0=0x%x\n", | 
 | 					_i2c_readw(i2c, 0xE0), | 
 | 					_i2c_readw(i2c, 0x1E0), | 
 | 					_i2c_readw(i2c, 0x2E0)); | 
 | 				pr_info("[bxx]0xE4=0x%x,0x1E4=0x%x,0x2E4=0x%x\n", | 
 | 					_i2c_readw(i2c, 0xE4), | 
 | 					_i2c_readw(i2c, 0x1E4), | 
 | 					_i2c_readw(i2c, 0x2E4)); | 
 | 				pr_info("[bxx]0xE8=0x%x,0x1E8=0x%x,0x2E8=0x%x\n", | 
 | 					_i2c_readw(i2c, 0xE8), | 
 | 					_i2c_readw(i2c, 0x1E8), | 
 | 					_i2c_readw(i2c, 0x2E8)); | 
 | 				pr_info("[bxx]0xEC=0x%x,0x1EC=0x%x,0x2EC=0x%x\n", | 
 | 					_i2c_readw(i2c, 0xEC), | 
 | 					_i2c_readw(i2c, 0x1EC), | 
 | 					_i2c_readw(i2c, 0x2EC)); | 
 | 				pr_info("[bxx]0x58=0x%x,0x158=0x%x,0x258=0x%x\n", | 
 | 					_i2c_readw(i2c, 0x58), | 
 | 					_i2c_readw(i2c, 0x158), | 
 | 					_i2c_readw(i2c, 0x258)); | 
 | 				/* IBI triggered */ | 
 | 				pr_info("[bxx]0x54=0x%x,0x154=0x%x,0x254=0x%x\n", | 
 | 					_i2c_readw(i2c, 0x54), | 
 | 					_i2c_readw(i2c, 0x154), | 
 | 					_i2c_readw(i2c, 0x254)); | 
 | 				/* for bxx debug end */ | 
 | 			} | 
 | 		} | 
 | 	} else {/* dump regs info for hw trig i2c if ACK err */ | 
 | 		if (i2c->irq_stat & (I2C_HS_NACKERR | I2C_ACKERR)) { | 
 | 			dev_info(i2c->dev, "addr:0x%x,irq_stat:0x%x,transfer ACK error\n", | 
 | 				i2c->addr, i2c->irq_stat); | 
 | 			i2c_dump_info(i2c); | 
 | 			mt_i2c_init_hw(i2c); | 
 | 		} else { | 
 | 			dev_info(i2c->dev, "addr:0x%x, other irq_stat:0x%x\n", | 
 | 				i2c->addr, i2c->irq_stat); | 
 | 		} | 
 | 	} | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static u32 mt_i2c_functionality(struct i2c_adapter *adap) | 
 | { | 
 | 	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL; | 
 | } | 
 |  | 
 | static const struct i2c_algorithm mt_i2c_algorithm = { | 
 | 	.master_xfer = mt_i2c_transfer, | 
 | 	.functionality = mt_i2c_functionality, | 
 | }; | 
 |  | 
 | static int mt_i2c_parse_dt(struct device_node *np, struct mt_i2c *i2c) | 
 | { | 
 | 	int ret = -1; | 
 |  | 
 | 	i2c->speed_hz = I2C_DEFAUT_SPEED; | 
 | 	of_property_read_u32(np, "clock-frequency", &i2c->speed_hz); | 
 | 	of_property_read_u32(np, "clock-div", &i2c->clk_src_div); | 
 | 	of_property_read_u32(np, "scl-gpio-id", &i2c->scl_gpio_id); | 
 | 	of_property_read_u32(np, "sda-gpio-id", &i2c->sda_gpio_id); | 
 | 	of_property_read_u32(np, "gpio_start", &i2c->gpio_start); | 
 | 	of_property_read_u32(np, "mem_len", &i2c->mem_len); | 
 | 	of_property_read_u32(np, "eh_cfg", &i2c->offset_eh_cfg); | 
 | 	of_property_read_u32(np, "pu_cfg", &i2c->offset_pu_cfg); | 
 | 	of_property_read_u32(np, "rsel_cfg", &i2c->offset_rsel_cfg); | 
 | 	of_property_read_u32(np, "id", (u32 *)&i2c->id); | 
 | 	of_property_read_u16(np, "clk_sta_offset", | 
 | 		(u16 *)&i2c->clk_sta_offset); | 
 | 	of_property_read_u8(np, "cg_bit", (u8 *)&i2c->cg_bit); | 
 | 	of_property_read_u32(np, "aed", &i2c->aed); | 
 | 	of_property_read_u32(np, "ch_offset_default", | 
 | 		&i2c->ch_offset_default); | 
 | 	of_property_read_u32(np, "ch_offset_dma_default", | 
 | 		&i2c->ch_offset_dma_default); | 
 | 	ret = of_property_read_u32(np, "ch_offset_ccu", &i2c->ccu_offset); | 
 | 	if (!ret) | 
 | 		i2c->has_ccu = true; | 
 | 	else | 
 | 		i2c->has_ccu = false; | 
 |  | 
 | 	i2c->have_pmic | 
 | 		= of_property_read_bool(np, "mediatek,have-pmic"); | 
 | 	i2c->have_dcm | 
 | 		= of_property_read_bool(np, "mediatek,have-dcm"); | 
 | 	i2c->use_push_pull | 
 | 		= of_property_read_bool(np, "mediatek,use-push-pull"); | 
 | 	i2c->appm | 
 | 		= of_property_read_bool(np, "mediatek,appm_used"); | 
 | 	i2c->gpupm | 
 | 		= of_property_read_bool(np, "mediatek,gpupm_used"); | 
 | 	i2c->buffermode = of_property_read_bool(np, "mediatek,buffermode_used"); | 
 | 	i2c->hs_only = of_property_read_bool(np, "mediatek,hs_only"); | 
 | 	pr_info("[I2C]id:%d,freq:%d,div:%d,ch_offset:0x%x,offset_dma:0x%x,offset_ccu:0x%x\n", | 
 | 		i2c->id, i2c->speed_hz, i2c->clk_src_div, | 
 | 		i2c->ch_offset_default, | 
 | 		i2c->ch_offset_dma_default, i2c->ccu_offset); | 
 | 	if (i2c->clk_src_div == 0) | 
 | 		return -EINVAL; | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | int mt_i2c_parse_comp_data(void) | 
 | { | 
 | 	int ret = -1; | 
 | 	struct device_node *comp_node; | 
 |  | 
 | 	comp_node = of_find_compatible_node(NULL, NULL, "mediatek,i2c_common"); | 
 | 	if (!comp_node) { | 
 | 		pr_info("Cannot find i2c_common node\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	of_property_read_u8(comp_node, "dma_support", | 
 | 		(u8 *)&i2c_common_compat.dma_support); | 
 | 	of_property_read_u8(comp_node, "idvfs", | 
 | 		(u8 *)&i2c_common_compat.idvfs_i2c); | 
 | 	of_property_read_u8(comp_node, "set_dt_div", | 
 | 		(u8 *)&i2c_common_compat.set_dt_div); | 
 | 	of_property_read_u8(comp_node, "check_max_freq", | 
 | 		(u8 *)&i2c_common_compat.check_max_freq); | 
 | 	of_property_read_u8(comp_node, "set_ltiming", | 
 | 		(u8 *)&i2c_common_compat.set_ltiming); | 
 | 	of_property_read_u8(comp_node, "set_aed", | 
 | 		(u8 *)&i2c_common_compat.set_aed); | 
 | 	of_property_read_u16(comp_node, "ext_time_config", | 
 | 		(u16 *)&i2c_common_compat.ext_time_config); | 
 | 	ret = of_property_count_u8_elems(comp_node, "clk_compatible"); | 
 | 	if (ret > 0) | 
 | 		of_property_read_u8_array(comp_node, "clk_compatible", | 
 | 			(u8 *)i2c_common_compat.clk_compatible, ret); | 
 | 	else | 
 | 		pr_info("[I2C]No clk_compatible(%d)\n", ret); | 
 | 	of_property_read_u32(comp_node, "clk_sel_offset", | 
 | 		(u32 *)&i2c_common_compat.clk_sel_offset); | 
 | 	of_property_read_u32(comp_node, "arbit_offset", | 
 | 		(u32 *)&i2c_common_compat.arbit_offset); | 
 | 	of_property_read_u8(comp_node, "ver", | 
 | 		(u8 *)&i2c_common_compat.ver); | 
 | 	of_property_read_u8(comp_node, "cnt_constraint", | 
 | 		(u8 *)&i2c_common_compat.cnt_constraint); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct of_device_id mtk_i2c_of_match[] = { | 
 | 	{ .compatible = "mediatek,i2c", .data = &i2c_common_compat}, | 
 | 	{}, | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(of, mtk_i2c_of_match); | 
 |  | 
 | static int mt_i2c_probe(struct platform_device *pdev) | 
 | { | 
 | 	int ret = 0; | 
 | 	struct mt_i2c *i2c; | 
 | 	unsigned int clk_src_in_hz; | 
 | 	struct resource *res; | 
 | 	const struct of_device_id *of_id; | 
 |  | 
 | 	i2c = devm_kzalloc(&pdev->dev, sizeof(struct mt_i2c), GFP_KERNEL); | 
 | 	if (i2c == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ret = mt_i2c_parse_dt(pdev->dev.of_node, i2c); | 
 | 	if (ret) | 
 | 		return -EINVAL; | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 |  | 
 | 	i2c->base = devm_ioremap_resource(&pdev->dev, res); | 
 | 	if (IS_ERR(i2c->base)) | 
 | 		return PTR_ERR(i2c->base); | 
 |  | 
 | 	if (i2c->id < I2C_MAX_CHANNEL) | 
 | 		g_mt_i2c[i2c->id] = i2c; | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1); | 
 |  | 
 | 	i2c->pdmabase = devm_ioremap_resource(&pdev->dev, res); | 
 | 	if (IS_ERR(i2c->pdmabase)) | 
 | 		return PTR_ERR(i2c->pdmabase); | 
 |  | 
 | 	i2c->gpiobase = devm_ioremap(&pdev->dev, i2c->gpio_start, i2c->mem_len); | 
 | 	if (IS_ERR(i2c->gpiobase)) { | 
 | 		i2c->gpiobase = NULL; | 
 | 		dev_info(&pdev->dev, "do not have gpio baseaddress node\n"); | 
 | 	} | 
 |  | 
 | 	i2c->irqnr = platform_get_irq(pdev, 0); | 
 | 	if (i2c->irqnr <= 0) | 
 | 		return -EINVAL; | 
 | 	init_waitqueue_head(&i2c->wait); | 
 |  | 
 | 	ret = devm_request_irq(&pdev->dev, i2c->irqnr, mt_i2c_irq, | 
 | 		IRQF_NO_SUSPEND | IRQF_TRIGGER_NONE, I2C_DRV_NAME, i2c); | 
 | 	if (ret < 0) { | 
 | 		dev_info(&pdev->dev, | 
 | 			"Request I2C IRQ %d fail\n", i2c->irqnr); | 
 | 		return ret; | 
 | 	} | 
 | 	of_id = of_match_node(mtk_i2c_of_match, pdev->dev.of_node); | 
 | 	if (!of_id) | 
 | 		return -EINVAL; | 
 |  | 
 | 	i2c->dev_comp = of_id->data; | 
 | 	i2c->adap.dev.of_node = pdev->dev.of_node; | 
 | 	i2c->dev = &i2c->adap.dev; | 
 | 	i2c->adap.dev.parent = &pdev->dev; | 
 | 	i2c->adap.owner = THIS_MODULE; | 
 | 	i2c->adap.algo = &mt_i2c_algorithm; | 
 | 	i2c->adap.algo_data = NULL; | 
 | 	i2c->adap.timeout = 2 * HZ; | 
 | 	i2c->adap.retries = 1; | 
 | 	i2c->adap.nr = i2c->id; | 
 | 	spin_lock_init(&i2c->cg_lock); | 
 |  | 
 | 	if (i2c->dev_comp->dma_support == 2) { | 
 | 		if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(33))) { | 
 | 			dev_info(&pdev->dev, "dma_set_mask return error.\n"); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} else if (i2c->dev_comp->dma_support == 3) { | 
 | 		if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(36))) { | 
 | 			dev_info(&pdev->dev, "dma_set_mask return error.\n"); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} | 
 |  | 
 | #if !defined(CONFIG_MT_I2C_FPGA_ENABLE) | 
 | 	i2c->clk_main = devm_clk_get(&pdev->dev, "main"); | 
 | 	if (IS_ERR(i2c->clk_main)) { | 
 | 		dev_info(&pdev->dev, "cannot get main clock\n"); | 
 | 		return PTR_ERR(i2c->clk_main); | 
 | 	} | 
 | 	i2c->clk_dma = devm_clk_get(&pdev->dev, "dma"); | 
 | 	if (IS_ERR(i2c->clk_dma)) { | 
 | 		dev_info(&pdev->dev, "cannot get dma clock\n"); | 
 | 		return PTR_ERR(i2c->clk_dma); | 
 | 	} | 
 | 	i2c->clk_arb = devm_clk_get(&pdev->dev, "arb"); | 
 | 	if (IS_ERR(i2c->clk_arb)) | 
 | 		i2c->clk_arb = NULL; | 
 | 	else | 
 | 		dev_dbg(&pdev->dev, "i2c%d has the relevant arbitrator clk.\n", | 
 | 			i2c->id); | 
 | 	i2c->clk_pal = devm_clk_get(&pdev->dev, "pal"); | 
 | 	if (IS_ERR(i2c->clk_pal)) | 
 | 		i2c->clk_pal = NULL; | 
 | 	else | 
 | 		dev_dbg(&pdev->dev, "i2c%d has the relevant pal clk.\n", | 
 | 			i2c->id); | 
 | #endif | 
 |  | 
 | 	if (i2c->have_pmic) { | 
 | 		i2c->clk_pmic = devm_clk_get(&pdev->dev, "pmic"); | 
 | 		if (IS_ERR(i2c->clk_pmic)) { | 
 | 			dev_info(&pdev->dev, "cannot get pmic clock\n"); | 
 | 			return PTR_ERR(i2c->clk_pmic); | 
 | 		} | 
 | 		clk_src_in_hz = clk_get_rate(i2c->clk_pmic) / i2c->clk_src_div; | 
 | 	} else { | 
 | 		clk_src_in_hz = clk_get_rate(i2c->clk_main) / i2c->clk_src_div; | 
 | 	} | 
 | 	i2c->main_clk = clk_src_in_hz; | 
 | 	dev_info(&pdev->dev, "i2c%d clock source %p,clock src frequency %d\n", | 
 | 		i2c->id, i2c->clk_main, clk_src_in_hz); | 
 |  | 
 | 	strlcpy(i2c->adap.name, I2C_DRV_NAME, sizeof(i2c->adap.name)); | 
 | 	mutex_init(&i2c->i2c_mutex); | 
 | 	ret = i2c_set_speed(i2c, clk_src_in_hz); | 
 | 	if (ret) { | 
 | 		dev_info(&pdev->dev, "Failed to set the speed\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	ret = mt_i2c_clock_enable(i2c); | 
 | 	if (ret) { | 
 | 		dev_info(&pdev->dev, "clock enable failed!\n"); | 
 | 		return ret; | 
 | 	} | 
 | 	mt_i2c_init_hw(i2c); | 
 |  | 
 | 	mt_i2c_clock_disable(i2c); | 
 | 	if (i2c->ch_offset_default) | 
 | 		i2c->dma_buf.vaddr = dma_alloc_coherent(&pdev->dev, | 
 | 			(PAGE_SIZE * 2), &i2c->dma_buf.paddr, GFP_KERNEL); | 
 | 	else | 
 | 		i2c->dma_buf.vaddr = dma_alloc_coherent(&pdev->dev, | 
 | 			PAGE_SIZE, &i2c->dma_buf.paddr, GFP_KERNEL); | 
 |  | 
 | 	if (i2c->dma_buf.vaddr == NULL) { | 
 | 		dev_info(&pdev->dev, "dma_alloc_coherent fail\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	i2c_set_adapdata(&i2c->adap, i2c); | 
 | 	/* ret = i2c_add_adapter(&i2c->adap); */ | 
 | 	ret = i2c_add_numbered_adapter(&i2c->adap); | 
 | 	if (ret) { | 
 | 		dev_info(&pdev->dev, "Failed to add i2c bus to i2c core\n"); | 
 | 		free_i2c_dma_bufs(i2c); | 
 | 		return ret; | 
 | 	} | 
 | 	platform_set_drvdata(pdev, i2c); | 
 |  | 
 | 	if (!map_cg_regs(i2c)) | 
 | 		pr_info("Map cg regs successfully.\n"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mt_i2c_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct mt_i2c *i2c = platform_get_drvdata(pdev); | 
 |  | 
 | 	i2c_del_adapter(&i2c->adap); | 
 | 	free_i2c_dma_bufs(i2c); | 
 | 	platform_set_drvdata(pdev, NULL); | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | MODULE_DEVICE_TABLE(of, mt_i2c_match); | 
 |  | 
 | #ifdef CONFIG_PM_SLEEP | 
 | static int mt_i2c_suspend_noirq(struct device *dev) | 
 | { | 
 | 	struct platform_device *pdev = to_platform_device(dev); | 
 | 	struct mt_i2c *i2c = platform_get_drvdata(pdev); | 
 | 	int ret = 0; | 
 |  | 
 | 	spin_lock(&i2c->cg_lock); | 
 | 	if (i2c->cg_cnt > 0) { | 
 | 		ret = -EBUSY; | 
 | 		dev_info(i2c->dev, "%s(%d) busy\n", __func__, i2c->cg_cnt); | 
 | 	} else | 
 | 		i2c->suspended = true; | 
 | 	spin_unlock(&i2c->cg_lock); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int mt_i2c_resume_noirq(struct device *dev) | 
 | { | 
 | 	struct platform_device *pdev = to_platform_device(dev); | 
 | 	struct mt_i2c *i2c = platform_get_drvdata(pdev); | 
 |  | 
 | 	spin_lock(&i2c->cg_lock); | 
 | 	i2c->suspended = false; | 
 | 	spin_unlock(&i2c->cg_lock); | 
 |  | 
 | 	if (i2c->ch_offset_default) { | 
 | 		if (mt_i2c_clock_enable(i2c)) | 
 | 			dev_info(i2c->dev, "%s enable clock failed\n", | 
 | 				 __func__); | 
 | #if 0 | 
 | 		/* Disable rollback mode for multi-channel */ | 
 | 		mt_secure_call(MTK_SIP_KERNEL_I2C_SEC_WRITE, | 
 | 			i2c->id, V2_OFFSET_ROLLBACK, 0); | 
 | #endif | 
 | 		/* Enable multi-channel DMA mode at ATF */ | 
 | 		mt_secure_call(MTK_SIP_KERNEL_I2C_SEC_WRITE, i2c->id, | 
 | 			       V2_OFFSET_MULTI_DMA, I2C_SHADOW_REG_MODE, 0); | 
 |  | 
 | 		mt_i2c_clock_disable(i2c); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | #endif | 
 |  | 
 | static const struct dev_pm_ops mt_i2c_dev_pm_ops = { | 
 | #ifdef CONFIG_PM_SLEEP | 
 | 	.suspend_noirq = mt_i2c_suspend_noirq, | 
 | 	.resume_noirq = mt_i2c_resume_noirq, | 
 | #endif | 
 | }; | 
 |  | 
 | static struct platform_driver mt_i2c_driver = { | 
 | 	.probe = mt_i2c_probe, | 
 | 	.remove = mt_i2c_remove, | 
 | 	.driver = { | 
 | 		.name = I2C_DRV_NAME, | 
 | 		.owner = THIS_MODULE, | 
 | 		.pm = &mt_i2c_dev_pm_ops, | 
 | 		.of_match_table = of_match_ptr(mtk_i2c_of_match), | 
 | 	}, | 
 | }; | 
 |  | 
 | #ifdef CONFIG_MTK_I2C_ARBITRATION | 
 | static s32 enable_arbitration(void) | 
 | { | 
 | 	struct device_node *pericfg_node; | 
 | 	void __iomem *pericfg_base; | 
 |  | 
 | 	pericfg_node = of_find_compatible_node(NULL, NULL, "mediatek,pericfg"); | 
 | 	if (!pericfg_node) { | 
 | 		pr_info("Cannot find pericfg node\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	pericfg_base = of_iomap(pericfg_node, 0); | 
 | 	if (!pericfg_base) { | 
 | 		pr_info("pericfg iomap failed\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	/* Enable the I2C arbitration */ | 
 | 	writew(0x3, pericfg_base + OFFSET_PERI_I2C_MODE_ENABLE); | 
 | 	return 0; | 
 | } | 
 | #endif | 
 |  | 
 | static s32 __init mt_i2c_init(void) | 
 | { | 
 | #ifdef CONFIG_MTK_I2C_ARBITRATION | 
 | 	int ret; | 
 |  | 
 | 	ret = enable_arbitration(); | 
 | 	if (ret) { | 
 | 		pr_info("Cannot enalbe arbitration.\n"); | 
 | 		return ret; | 
 | 	} | 
 | #endif | 
 |  | 
 | 	if (!map_dma_regs()) | 
 | 		pr_info("Mapp dma regs successfully.\n"); | 
 | 	if (!mt_i2c_parse_comp_data()) | 
 | 		pr_info("Get compatible data from dts successfully.\n"); | 
 |  | 
 | 	pr_info("%s: driver as platform device\n", __func__); | 
 | 	return platform_driver_register(&mt_i2c_driver); | 
 | } | 
 |  | 
 | static void __exit mt_i2c_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&mt_i2c_driver); | 
 | } | 
 |  | 
 | module_init(mt_i2c_init); | 
 | module_exit(mt_i2c_exit); | 
 |  | 
 | /* module_platform_driver(mt_i2c_driver); */ | 
 |  | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_DESCRIPTION("MediaTek I2C Bus Driver"); | 
 | MODULE_AUTHOR("Xudong Chen <xudong.chen@mediatek.com>"); |