| /* | 
 |  * drivers/i2c/busses/i2c-tegra-bpmp.c | 
 |  * | 
 |  * Copyright (c) 2016 NVIDIA Corporation.  All rights reserved. | 
 |  * | 
 |  * Author: Shardar Shariff Md <smohammed@nvidia.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify it | 
 |  * under the terms and conditions of the GNU General Public License, | 
 |  * version 2, as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope it will be useful, but WITHOUT | 
 |  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
 |  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
 |  * more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program.  If not, see <http://www.gnu.org/licenses/>. | 
 |  */ | 
 |  | 
 | #include <linux/err.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/init.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/of_device.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/pm_runtime.h> | 
 |  | 
 | #include <soc/tegra/bpmp-abi.h> | 
 | #include <soc/tegra/bpmp.h> | 
 |  | 
 | /* | 
 |  * Serialized I2C message header size is 6 bytes and includes address, flags | 
 |  * and length | 
 |  */ | 
 | #define SERIALI2C_HDR_SIZE 6 | 
 |  | 
 | struct tegra_bpmp_i2c { | 
 | 	struct i2c_adapter adapter; | 
 | 	struct device *dev; | 
 |  | 
 | 	struct tegra_bpmp *bpmp; | 
 | 	unsigned int bus; | 
 | }; | 
 |  | 
 | /* | 
 |  * Linux flags are translated to BPMP defined I2C flags that are used in BPMP | 
 |  * firmware I2C driver to avoid any issues in future if Linux I2C flags are | 
 |  * changed. | 
 |  */ | 
 | static int tegra_bpmp_xlate_flags(u16 flags, u16 *out) | 
 | { | 
 | 	if (flags & I2C_M_TEN) { | 
 | 		*out |= SERIALI2C_TEN; | 
 | 		flags &= ~I2C_M_TEN; | 
 | 	} | 
 |  | 
 | 	if (flags & I2C_M_RD) { | 
 | 		*out |= SERIALI2C_RD; | 
 | 		flags &= ~I2C_M_RD; | 
 | 	} | 
 |  | 
 | 	if (flags & I2C_M_STOP) { | 
 | 		*out |= SERIALI2C_STOP; | 
 | 		flags &= ~I2C_M_STOP; | 
 | 	} | 
 |  | 
 | 	if (flags & I2C_M_NOSTART) { | 
 | 		*out |= SERIALI2C_NOSTART; | 
 | 		flags &= ~I2C_M_NOSTART; | 
 | 	} | 
 |  | 
 | 	if (flags & I2C_M_REV_DIR_ADDR) { | 
 | 		*out |= SERIALI2C_REV_DIR_ADDR; | 
 | 		flags &= ~I2C_M_REV_DIR_ADDR; | 
 | 	} | 
 |  | 
 | 	if (flags & I2C_M_IGNORE_NAK) { | 
 | 		*out |= SERIALI2C_IGNORE_NAK; | 
 | 		flags &= ~I2C_M_IGNORE_NAK; | 
 | 	} | 
 |  | 
 | 	if (flags & I2C_M_NO_RD_ACK) { | 
 | 		*out |= SERIALI2C_NO_RD_ACK; | 
 | 		flags &= ~I2C_M_NO_RD_ACK; | 
 | 	} | 
 |  | 
 | 	if (flags & I2C_M_RECV_LEN) { | 
 | 		*out |= SERIALI2C_RECV_LEN; | 
 | 		flags &= ~I2C_M_RECV_LEN; | 
 | 	} | 
 |  | 
 | 	return (flags != 0) ? -EINVAL : 0; | 
 | } | 
 |  | 
 | /** | 
 |  * The serialized I2C format is simply the following: | 
 |  * [addr little-endian][flags little-endian][len little-endian][data if write] | 
 |  * [addr little-endian][flags little-endian][len little-endian][data if write] | 
 |  *  ... | 
 |  * | 
 |  * The flags are translated from Linux kernel representation to seriali2c | 
 |  * representation. Any undefined flag being set causes an error. | 
 |  * | 
 |  * The data is there only for writes. Reads have the data transferred in the | 
 |  * other direction, and thus data is not present. | 
 |  * | 
 |  * See deserialize_i2c documentation for the data format in the other direction. | 
 |  */ | 
 | static int tegra_bpmp_serialize_i2c_msg(struct tegra_bpmp_i2c *i2c, | 
 | 					struct mrq_i2c_request *request, | 
 | 					struct i2c_msg *msgs, | 
 | 					unsigned int num) | 
 | { | 
 | 	char *buf = request->xfer.data_buf; | 
 | 	unsigned int i, j, pos = 0; | 
 | 	int err; | 
 |  | 
 | 	for (i = 0; i < num; i++) { | 
 | 		struct i2c_msg *msg = &msgs[i]; | 
 | 		u16 flags = 0; | 
 |  | 
 | 		err = tegra_bpmp_xlate_flags(msg->flags, &flags); | 
 | 		if (err < 0) | 
 | 			return err; | 
 |  | 
 | 		buf[pos++] = msg->addr & 0xff; | 
 | 		buf[pos++] = (msg->addr & 0xff00) >> 8; | 
 | 		buf[pos++] = flags & 0xff; | 
 | 		buf[pos++] = (flags & 0xff00) >> 8; | 
 | 		buf[pos++] = msg->len & 0xff; | 
 | 		buf[pos++] = (msg->len & 0xff00) >> 8; | 
 |  | 
 | 		if ((flags & SERIALI2C_RD) == 0) { | 
 | 			for (j = 0; j < msg->len; j++) | 
 | 				buf[pos++] = msg->buf[j]; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	request->xfer.data_size = pos; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * The data in the BPMP -> CPU direction is composed of sequential blocks for | 
 |  * those messages that have I2C_M_RD. So, for example, if you have: | 
 |  * | 
 |  * - !I2C_M_RD, len == 5, data == a0 01 02 03 04 | 
 |  * - !I2C_M_RD, len == 1, data == a0 | 
 |  * - I2C_M_RD, len == 2, data == [uninitialized buffer 1] | 
 |  * - !I2C_M_RD, len == 1, data == a2 | 
 |  * - I2C_M_RD, len == 2, data == [uninitialized buffer 2] | 
 |  * | 
 |  * ...then the data in the BPMP -> CPU direction would be 4 bytes total, and | 
 |  * would contain 2 bytes that will go to uninitialized buffer 1, and 2 bytes | 
 |  * that will go to uninitialized buffer 2. | 
 |  */ | 
 | static int tegra_bpmp_i2c_deserialize(struct tegra_bpmp_i2c *i2c, | 
 | 				      struct mrq_i2c_response *response, | 
 | 				      struct i2c_msg *msgs, | 
 | 				      unsigned int num) | 
 | { | 
 | 	size_t size = response->xfer.data_size, len = 0, pos = 0; | 
 | 	char *buf = response->xfer.data_buf; | 
 | 	unsigned int i; | 
 |  | 
 | 	for (i = 0; i < num; i++) | 
 | 		if (msgs[i].flags & I2C_M_RD) | 
 | 			len += msgs[i].len; | 
 |  | 
 | 	if (len != size) | 
 | 		return -EINVAL; | 
 |  | 
 | 	for (i = 0; i < num; i++) { | 
 | 		if (msgs[i].flags & I2C_M_RD) { | 
 | 			memcpy(msgs[i].buf, buf + pos, msgs[i].len); | 
 | 			pos += msgs[i].len; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tegra_bpmp_i2c_msg_len_check(struct i2c_msg *msgs, unsigned int num) | 
 | { | 
 | 	size_t tx_len = 0, rx_len = 0; | 
 | 	unsigned int i; | 
 |  | 
 | 	for (i = 0; i < num; i++) | 
 | 		if (!(msgs[i].flags & I2C_M_RD)) | 
 | 			tx_len += SERIALI2C_HDR_SIZE + msgs[i].len; | 
 |  | 
 | 	if (tx_len > TEGRA_I2C_IPC_MAX_IN_BUF_SIZE) | 
 | 		return -EINVAL; | 
 |  | 
 | 	for (i = 0; i < num; i++) | 
 | 		if ((msgs[i].flags & I2C_M_RD)) | 
 | 			rx_len += msgs[i].len; | 
 |  | 
 | 	if (rx_len > TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE) | 
 | 		return -EINVAL; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tegra_bpmp_i2c_msg_xfer(struct tegra_bpmp_i2c *i2c, | 
 | 				   struct mrq_i2c_request *request, | 
 | 				   struct mrq_i2c_response *response) | 
 | { | 
 | 	struct tegra_bpmp_message msg; | 
 | 	int err; | 
 |  | 
 | 	request->cmd = CMD_I2C_XFER; | 
 | 	request->xfer.bus_id = i2c->bus; | 
 |  | 
 | 	memset(&msg, 0, sizeof(msg)); | 
 | 	msg.mrq = MRQ_I2C; | 
 | 	msg.tx.data = request; | 
 | 	msg.tx.size = sizeof(*request); | 
 | 	msg.rx.data = response; | 
 | 	msg.rx.size = sizeof(*response); | 
 |  | 
 | 	if (irqs_disabled()) | 
 | 		err = tegra_bpmp_transfer_atomic(i2c->bpmp, &msg); | 
 | 	else | 
 | 		err = tegra_bpmp_transfer(i2c->bpmp, &msg); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int tegra_bpmp_i2c_xfer(struct i2c_adapter *adapter, | 
 | 			       struct i2c_msg *msgs, int num) | 
 | { | 
 | 	struct tegra_bpmp_i2c *i2c = i2c_get_adapdata(adapter); | 
 | 	struct mrq_i2c_response response; | 
 | 	struct mrq_i2c_request request; | 
 | 	int err; | 
 |  | 
 | 	err = tegra_bpmp_i2c_msg_len_check(msgs, num); | 
 | 	if (err < 0) { | 
 | 		dev_err(i2c->dev, "unsupported message length\n"); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	memset(&request, 0, sizeof(request)); | 
 | 	memset(&response, 0, sizeof(response)); | 
 |  | 
 | 	err = tegra_bpmp_serialize_i2c_msg(i2c, &request, msgs, num); | 
 | 	if (err < 0) { | 
 | 		dev_err(i2c->dev, "failed to serialize message: %d\n", err); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	err = tegra_bpmp_i2c_msg_xfer(i2c, &request, &response); | 
 | 	if (err < 0) { | 
 | 		dev_err(i2c->dev, "failed to transfer message: %d\n", err); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	err = tegra_bpmp_i2c_deserialize(i2c, &response, msgs, num); | 
 | 	if (err < 0) { | 
 | 		dev_err(i2c->dev, "failed to deserialize message: %d\n", err); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	return num; | 
 | } | 
 |  | 
 | static u32 tegra_bpmp_i2c_func(struct i2c_adapter *adapter) | 
 | { | 
 | 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR | | 
 | 	       I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_NOSTART; | 
 | } | 
 |  | 
 | static const struct i2c_algorithm tegra_bpmp_i2c_algo = { | 
 | 	.master_xfer = tegra_bpmp_i2c_xfer, | 
 | 	.functionality = tegra_bpmp_i2c_func, | 
 | }; | 
 |  | 
 | static int tegra_bpmp_i2c_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct tegra_bpmp_i2c *i2c; | 
 | 	u32 value; | 
 | 	int err; | 
 |  | 
 | 	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); | 
 | 	if (!i2c) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	i2c->dev = &pdev->dev; | 
 |  | 
 | 	i2c->bpmp = dev_get_drvdata(pdev->dev.parent); | 
 | 	if (!i2c->bpmp) | 
 | 		return -ENODEV; | 
 |  | 
 | 	err = of_property_read_u32(pdev->dev.of_node, "nvidia,bpmp-bus-id", | 
 | 				   &value); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	i2c->bus = value; | 
 |  | 
 | 	i2c_set_adapdata(&i2c->adapter, i2c); | 
 | 	i2c->adapter.owner = THIS_MODULE; | 
 | 	strlcpy(i2c->adapter.name, "Tegra BPMP I2C adapter", | 
 | 		sizeof(i2c->adapter.name)); | 
 | 	i2c->adapter.algo = &tegra_bpmp_i2c_algo; | 
 | 	i2c->adapter.dev.parent = &pdev->dev; | 
 | 	i2c->adapter.dev.of_node = pdev->dev.of_node; | 
 |  | 
 | 	platform_set_drvdata(pdev, i2c); | 
 |  | 
 | 	return i2c_add_adapter(&i2c->adapter); | 
 | } | 
 |  | 
 | static int tegra_bpmp_i2c_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct tegra_bpmp_i2c *i2c = platform_get_drvdata(pdev); | 
 |  | 
 | 	i2c_del_adapter(&i2c->adapter); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct of_device_id tegra_bpmp_i2c_of_match[] = { | 
 | 	{ .compatible = "nvidia,tegra186-bpmp-i2c", }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, tegra_bpmp_i2c_of_match); | 
 |  | 
 | static struct platform_driver tegra_bpmp_i2c_driver = { | 
 | 	.driver = { | 
 | 		.name = "tegra-bpmp-i2c", | 
 | 		.of_match_table = tegra_bpmp_i2c_of_match, | 
 | 	}, | 
 | 	.probe = tegra_bpmp_i2c_probe, | 
 | 	.remove = tegra_bpmp_i2c_remove, | 
 | }; | 
 | module_platform_driver(tegra_bpmp_i2c_driver); | 
 |  | 
 | MODULE_DESCRIPTION("NVIDIA Tegra BPMP I2C bus controller driver"); | 
 | MODULE_AUTHOR("Shardar Shariff Md <smohammed@nvidia.com>"); | 
 | MODULE_AUTHOR("Juha-Matti Tilli"); | 
 | MODULE_LICENSE("GPL v2"); |