| rjw | 1f88458 | 2022-01-06 17:20:42 +0800 | [diff] [blame] | 1 | /* |
| 2 | * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> |
| 3 | * Copyright 2008 Juergen Beisert, kernel@pengutronix.de |
| 4 | * |
| 5 | * Based on code from Freescale, |
| 6 | * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License |
| 10 | * as published by the Free Software Foundation; either version 2 |
| 11 | * of the License, or (at your option) any later version. |
| 12 | * This program is distributed in the hope that it will be useful, |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | * GNU General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License |
| 18 | * along with this program; if not, write to the Free Software |
| 19 | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, |
| 20 | * MA 02110-1301, USA. |
| 21 | */ |
| 22 | |
| 23 | #include <linux/err.h> |
| 24 | #include <linux/init.h> |
| 25 | #include <linux/interrupt.h> |
| 26 | #include <linux/io.h> |
| 27 | #include <linux/irq.h> |
| 28 | #include <linux/irqdomain.h> |
| 29 | #include <linux/of.h> |
| 30 | #include <linux/of_address.h> |
| 31 | #include <linux/of_device.h> |
| 32 | #include <linux/platform_device.h> |
| 33 | #include <linux/slab.h> |
| 34 | #include <linux/gpio/driver.h> |
| 35 | #include <linux/module.h> |
| 36 | |
| 37 | #define MXS_SET 0x4 |
| 38 | #define MXS_CLR 0x8 |
| 39 | |
| 40 | #define PINCTRL_DOUT(p) ((is_imx23_gpio(p) ? 0x0500 : 0x0700) + (p->id) * 0x10) |
| 41 | #define PINCTRL_DIN(p) ((is_imx23_gpio(p) ? 0x0600 : 0x0900) + (p->id) * 0x10) |
| 42 | #define PINCTRL_DOE(p) ((is_imx23_gpio(p) ? 0x0700 : 0x0b00) + (p->id) * 0x10) |
| 43 | #define PINCTRL_PIN2IRQ(p) ((is_imx23_gpio(p) ? 0x0800 : 0x1000) + (p->id) * 0x10) |
| 44 | #define PINCTRL_IRQEN(p) ((is_imx23_gpio(p) ? 0x0900 : 0x1100) + (p->id) * 0x10) |
| 45 | #define PINCTRL_IRQLEV(p) ((is_imx23_gpio(p) ? 0x0a00 : 0x1200) + (p->id) * 0x10) |
| 46 | #define PINCTRL_IRQPOL(p) ((is_imx23_gpio(p) ? 0x0b00 : 0x1300) + (p->id) * 0x10) |
| 47 | #define PINCTRL_IRQSTAT(p) ((is_imx23_gpio(p) ? 0x0c00 : 0x1400) + (p->id) * 0x10) |
| 48 | |
| 49 | #define GPIO_INT_FALL_EDGE 0x0 |
| 50 | #define GPIO_INT_LOW_LEV 0x1 |
| 51 | #define GPIO_INT_RISE_EDGE 0x2 |
| 52 | #define GPIO_INT_HIGH_LEV 0x3 |
| 53 | #define GPIO_INT_LEV_MASK (1 << 0) |
| 54 | #define GPIO_INT_POL_MASK (1 << 1) |
| 55 | |
| 56 | enum mxs_gpio_id { |
| 57 | IMX23_GPIO, |
| 58 | IMX28_GPIO, |
| 59 | }; |
| 60 | |
| 61 | struct mxs_gpio_port { |
| 62 | void __iomem *base; |
| 63 | int id; |
| 64 | int irq; |
| 65 | struct irq_domain *domain; |
| 66 | struct gpio_chip gc; |
| 67 | struct device *dev; |
| 68 | enum mxs_gpio_id devid; |
| 69 | u32 both_edges; |
| 70 | }; |
| 71 | |
| 72 | static inline int is_imx23_gpio(struct mxs_gpio_port *port) |
| 73 | { |
| 74 | return port->devid == IMX23_GPIO; |
| 75 | } |
| 76 | |
| 77 | static inline int is_imx28_gpio(struct mxs_gpio_port *port) |
| 78 | { |
| 79 | return port->devid == IMX28_GPIO; |
| 80 | } |
| 81 | |
| 82 | /* Note: This driver assumes 32 GPIOs are handled in one register */ |
| 83 | |
| 84 | static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) |
| 85 | { |
| 86 | u32 val; |
| 87 | u32 pin_mask = 1 << d->hwirq; |
| 88 | struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); |
| 89 | struct irq_chip_type *ct = irq_data_get_chip_type(d); |
| 90 | struct mxs_gpio_port *port = gc->private; |
| 91 | void __iomem *pin_addr; |
| 92 | int edge; |
| 93 | |
| 94 | if (!(ct->type & type)) |
| 95 | if (irq_setup_alt_chip(d, type)) |
| 96 | return -EINVAL; |
| 97 | |
| 98 | port->both_edges &= ~pin_mask; |
| 99 | switch (type) { |
| 100 | case IRQ_TYPE_EDGE_BOTH: |
| 101 | val = port->gc.get(&port->gc, d->hwirq); |
| 102 | if (val) |
| 103 | edge = GPIO_INT_FALL_EDGE; |
| 104 | else |
| 105 | edge = GPIO_INT_RISE_EDGE; |
| 106 | port->both_edges |= pin_mask; |
| 107 | break; |
| 108 | case IRQ_TYPE_EDGE_RISING: |
| 109 | edge = GPIO_INT_RISE_EDGE; |
| 110 | break; |
| 111 | case IRQ_TYPE_EDGE_FALLING: |
| 112 | edge = GPIO_INT_FALL_EDGE; |
| 113 | break; |
| 114 | case IRQ_TYPE_LEVEL_LOW: |
| 115 | edge = GPIO_INT_LOW_LEV; |
| 116 | break; |
| 117 | case IRQ_TYPE_LEVEL_HIGH: |
| 118 | edge = GPIO_INT_HIGH_LEV; |
| 119 | break; |
| 120 | default: |
| 121 | return -EINVAL; |
| 122 | } |
| 123 | |
| 124 | /* set level or edge */ |
| 125 | pin_addr = port->base + PINCTRL_IRQLEV(port); |
| 126 | if (edge & GPIO_INT_LEV_MASK) { |
| 127 | writel(pin_mask, pin_addr + MXS_SET); |
| 128 | writel(pin_mask, port->base + PINCTRL_IRQEN(port) + MXS_SET); |
| 129 | } else { |
| 130 | writel(pin_mask, pin_addr + MXS_CLR); |
| 131 | writel(pin_mask, port->base + PINCTRL_PIN2IRQ(port) + MXS_SET); |
| 132 | } |
| 133 | |
| 134 | /* set polarity */ |
| 135 | pin_addr = port->base + PINCTRL_IRQPOL(port); |
| 136 | if (edge & GPIO_INT_POL_MASK) |
| 137 | writel(pin_mask, pin_addr + MXS_SET); |
| 138 | else |
| 139 | writel(pin_mask, pin_addr + MXS_CLR); |
| 140 | |
| 141 | writel(pin_mask, |
| 142 | port->base + PINCTRL_IRQSTAT(port) + MXS_CLR); |
| 143 | |
| 144 | return 0; |
| 145 | } |
| 146 | |
| 147 | static void mxs_flip_edge(struct mxs_gpio_port *port, u32 gpio) |
| 148 | { |
| 149 | u32 bit, val, edge; |
| 150 | void __iomem *pin_addr; |
| 151 | |
| 152 | bit = 1 << gpio; |
| 153 | |
| 154 | pin_addr = port->base + PINCTRL_IRQPOL(port); |
| 155 | val = readl(pin_addr); |
| 156 | edge = val & bit; |
| 157 | |
| 158 | if (edge) |
| 159 | writel(bit, pin_addr + MXS_CLR); |
| 160 | else |
| 161 | writel(bit, pin_addr + MXS_SET); |
| 162 | } |
| 163 | |
| 164 | /* MXS has one interrupt *per* gpio port */ |
| 165 | static void mxs_gpio_irq_handler(struct irq_desc *desc) |
| 166 | { |
| 167 | u32 irq_stat; |
| 168 | struct mxs_gpio_port *port = irq_desc_get_handler_data(desc); |
| 169 | |
| 170 | desc->irq_data.chip->irq_ack(&desc->irq_data); |
| 171 | |
| 172 | irq_stat = readl(port->base + PINCTRL_IRQSTAT(port)) & |
| 173 | readl(port->base + PINCTRL_IRQEN(port)); |
| 174 | |
| 175 | while (irq_stat != 0) { |
| 176 | int irqoffset = fls(irq_stat) - 1; |
| 177 | if (port->both_edges & (1 << irqoffset)) |
| 178 | mxs_flip_edge(port, irqoffset); |
| 179 | |
| 180 | generic_handle_irq(irq_find_mapping(port->domain, irqoffset)); |
| 181 | irq_stat &= ~(1 << irqoffset); |
| 182 | } |
| 183 | } |
| 184 | |
| 185 | /* |
| 186 | * Set interrupt number "irq" in the GPIO as a wake-up source. |
| 187 | * While system is running, all registered GPIO interrupts need to have |
| 188 | * wake-up enabled. When system is suspended, only selected GPIO interrupts |
| 189 | * need to have wake-up enabled. |
| 190 | * @param irq interrupt source number |
| 191 | * @param enable enable as wake-up if equal to non-zero |
| 192 | * @return This function returns 0 on success. |
| 193 | */ |
| 194 | static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable) |
| 195 | { |
| 196 | struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); |
| 197 | struct mxs_gpio_port *port = gc->private; |
| 198 | |
| 199 | if (enable) |
| 200 | enable_irq_wake(port->irq); |
| 201 | else |
| 202 | disable_irq_wake(port->irq); |
| 203 | |
| 204 | return 0; |
| 205 | } |
| 206 | |
| 207 | static int mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base) |
| 208 | { |
| 209 | struct irq_chip_generic *gc; |
| 210 | struct irq_chip_type *ct; |
| 211 | int rv; |
| 212 | |
| 213 | gc = devm_irq_alloc_generic_chip(port->dev, "gpio-mxs", 2, irq_base, |
| 214 | port->base, handle_level_irq); |
| 215 | if (!gc) |
| 216 | return -ENOMEM; |
| 217 | |
| 218 | gc->private = port; |
| 219 | |
| 220 | ct = &gc->chip_types[0]; |
| 221 | ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; |
| 222 | ct->chip.irq_ack = irq_gc_ack_set_bit; |
| 223 | ct->chip.irq_mask = irq_gc_mask_disable_reg; |
| 224 | ct->chip.irq_unmask = irq_gc_unmask_enable_reg; |
| 225 | ct->chip.irq_set_type = mxs_gpio_set_irq_type; |
| 226 | ct->chip.irq_set_wake = mxs_gpio_set_wake_irq; |
| 227 | ct->chip.flags = IRQCHIP_SET_TYPE_MASKED; |
| 228 | ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR; |
| 229 | ct->regs.enable = PINCTRL_PIN2IRQ(port) + MXS_SET; |
| 230 | ct->regs.disable = PINCTRL_PIN2IRQ(port) + MXS_CLR; |
| 231 | |
| 232 | ct = &gc->chip_types[1]; |
| 233 | ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; |
| 234 | ct->chip.irq_ack = irq_gc_ack_set_bit; |
| 235 | ct->chip.irq_mask = irq_gc_mask_disable_reg; |
| 236 | ct->chip.irq_unmask = irq_gc_unmask_enable_reg; |
| 237 | ct->chip.irq_set_type = mxs_gpio_set_irq_type; |
| 238 | ct->chip.irq_set_wake = mxs_gpio_set_wake_irq; |
| 239 | ct->chip.flags = IRQCHIP_SET_TYPE_MASKED; |
| 240 | ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR; |
| 241 | ct->regs.enable = PINCTRL_IRQEN(port) + MXS_SET; |
| 242 | ct->regs.disable = PINCTRL_IRQEN(port) + MXS_CLR; |
| 243 | ct->handler = handle_level_irq; |
| 244 | |
| 245 | rv = devm_irq_setup_generic_chip(port->dev, gc, IRQ_MSK(32), |
| 246 | IRQ_GC_INIT_NESTED_LOCK, |
| 247 | IRQ_NOREQUEST, 0); |
| 248 | |
| 249 | return rv; |
| 250 | } |
| 251 | |
| 252 | static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset) |
| 253 | { |
| 254 | struct mxs_gpio_port *port = gpiochip_get_data(gc); |
| 255 | |
| 256 | return irq_find_mapping(port->domain, offset); |
| 257 | } |
| 258 | |
| 259 | static int mxs_gpio_get_direction(struct gpio_chip *gc, unsigned offset) |
| 260 | { |
| 261 | struct mxs_gpio_port *port = gpiochip_get_data(gc); |
| 262 | u32 mask = 1 << offset; |
| 263 | u32 dir; |
| 264 | |
| 265 | dir = readl(port->base + PINCTRL_DOE(port)); |
| 266 | return !(dir & mask); |
| 267 | } |
| 268 | |
| 269 | static const struct platform_device_id mxs_gpio_ids[] = { |
| 270 | { |
| 271 | .name = "imx23-gpio", |
| 272 | .driver_data = IMX23_GPIO, |
| 273 | }, { |
| 274 | .name = "imx28-gpio", |
| 275 | .driver_data = IMX28_GPIO, |
| 276 | }, { |
| 277 | /* sentinel */ |
| 278 | } |
| 279 | }; |
| 280 | MODULE_DEVICE_TABLE(platform, mxs_gpio_ids); |
| 281 | |
| 282 | static const struct of_device_id mxs_gpio_dt_ids[] = { |
| 283 | { .compatible = "fsl,imx23-gpio", .data = (void *) IMX23_GPIO, }, |
| 284 | { .compatible = "fsl,imx28-gpio", .data = (void *) IMX28_GPIO, }, |
| 285 | { /* sentinel */ } |
| 286 | }; |
| 287 | MODULE_DEVICE_TABLE(of, mxs_gpio_dt_ids); |
| 288 | |
| 289 | static int mxs_gpio_probe(struct platform_device *pdev) |
| 290 | { |
| 291 | const struct of_device_id *of_id = |
| 292 | of_match_device(mxs_gpio_dt_ids, &pdev->dev); |
| 293 | struct device_node *np = pdev->dev.of_node; |
| 294 | struct device_node *parent; |
| 295 | static void __iomem *base; |
| 296 | struct mxs_gpio_port *port; |
| 297 | int irq_base; |
| 298 | int err; |
| 299 | |
| 300 | port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL); |
| 301 | if (!port) |
| 302 | return -ENOMEM; |
| 303 | |
| 304 | port->id = of_alias_get_id(np, "gpio"); |
| 305 | if (port->id < 0) |
| 306 | return port->id; |
| 307 | port->devid = (enum mxs_gpio_id) of_id->data; |
| 308 | port->dev = &pdev->dev; |
| 309 | port->irq = platform_get_irq(pdev, 0); |
| 310 | if (port->irq < 0) |
| 311 | return port->irq; |
| 312 | |
| 313 | /* |
| 314 | * map memory region only once, as all the gpio ports |
| 315 | * share the same one |
| 316 | */ |
| 317 | if (!base) { |
| 318 | parent = of_get_parent(np); |
| 319 | base = of_iomap(parent, 0); |
| 320 | of_node_put(parent); |
| 321 | if (!base) |
| 322 | return -EADDRNOTAVAIL; |
| 323 | } |
| 324 | port->base = base; |
| 325 | |
| 326 | /* initially disable the interrupts */ |
| 327 | writel(0, port->base + PINCTRL_PIN2IRQ(port)); |
| 328 | writel(0, port->base + PINCTRL_IRQEN(port)); |
| 329 | |
| 330 | /* clear address has to be used to clear IRQSTAT bits */ |
| 331 | writel(~0U, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR); |
| 332 | |
| 333 | irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, 32, numa_node_id()); |
| 334 | if (irq_base < 0) { |
| 335 | err = irq_base; |
| 336 | goto out_iounmap; |
| 337 | } |
| 338 | |
| 339 | port->domain = irq_domain_add_legacy(np, 32, irq_base, 0, |
| 340 | &irq_domain_simple_ops, NULL); |
| 341 | if (!port->domain) { |
| 342 | err = -ENODEV; |
| 343 | goto out_iounmap; |
| 344 | } |
| 345 | |
| 346 | /* gpio-mxs can be a generic irq chip */ |
| 347 | err = mxs_gpio_init_gc(port, irq_base); |
| 348 | if (err < 0) |
| 349 | goto out_irqdomain_remove; |
| 350 | |
| 351 | /* setup one handler for each entry */ |
| 352 | irq_set_chained_handler_and_data(port->irq, mxs_gpio_irq_handler, |
| 353 | port); |
| 354 | |
| 355 | err = bgpio_init(&port->gc, &pdev->dev, 4, |
| 356 | port->base + PINCTRL_DIN(port), |
| 357 | port->base + PINCTRL_DOUT(port) + MXS_SET, |
| 358 | port->base + PINCTRL_DOUT(port) + MXS_CLR, |
| 359 | port->base + PINCTRL_DOE(port), NULL, 0); |
| 360 | if (err) |
| 361 | goto out_irqdomain_remove; |
| 362 | |
| 363 | port->gc.to_irq = mxs_gpio_to_irq; |
| 364 | port->gc.get_direction = mxs_gpio_get_direction; |
| 365 | port->gc.base = port->id * 32; |
| 366 | |
| 367 | err = gpiochip_add_data(&port->gc, port); |
| 368 | if (err) |
| 369 | goto out_irqdomain_remove; |
| 370 | |
| 371 | return 0; |
| 372 | |
| 373 | out_irqdomain_remove: |
| 374 | irq_domain_remove(port->domain); |
| 375 | out_iounmap: |
| 376 | iounmap(port->base); |
| 377 | return err; |
| 378 | } |
| 379 | |
| 380 | static struct platform_driver mxs_gpio_driver = { |
| 381 | .driver = { |
| 382 | .name = "gpio-mxs", |
| 383 | .of_match_table = mxs_gpio_dt_ids, |
| 384 | .suppress_bind_attrs = true, |
| 385 | }, |
| 386 | .probe = mxs_gpio_probe, |
| 387 | .id_table = mxs_gpio_ids, |
| 388 | }; |
| 389 | |
| 390 | static int __init mxs_gpio_init(void) |
| 391 | { |
| 392 | return platform_driver_register(&mxs_gpio_driver); |
| 393 | } |
| 394 | postcore_initcall(mxs_gpio_init); |
| 395 | |
| 396 | MODULE_AUTHOR("Freescale Semiconductor, " |
| 397 | "Daniel Mack <danielncaiaq.de>, " |
| 398 | "Juergen Beisert <kernel@pengutronix.de>"); |
| 399 | MODULE_DESCRIPTION("Freescale MXS GPIO"); |
| 400 | MODULE_LICENSE("GPL"); |