Gitiles
Code Review Sign In
192.168.1.100 / T103 / 1f884588077ad3476b9c91cbb0ee9ee0332bbb68 / . / src / connectivity / bt_others / boots / boots_mt6xx.h
blob: da2b02afc3354278b424b9aad66d557b3f7437eb [file] [log] [blame]
rjw1f884582022-01-06 17:20:42 +0800[diff] [blame^]1/* Copyright Statement:
2 *
3 * This software/firmware and related documentation ("MediaTek Software") are
4 * protected under relevant copyright laws. The information contained herein is
5 * confidential and proprietary to MediaTek Inc. and/or its licensors. Without
6 * the prior written permission of MediaTek inc. and/or its licensors, any
7 * reproduction, modification, use or disclosure of MediaTek Software, and
8 * information contained herein, in whole or in part, shall be strictly
9 * prohibited.
10 *
11 * MediaTek Inc. (C) 2016~2017. All rights reserved.
12 *
13 * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
14 * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
15 * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER
16 * ON AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL
17 * WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
18 * WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
19 * NONINFRINGEMENT. NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH
20 * RESPECT TO THE SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY,
21 * INCORPORATED IN, OR SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES
22 * TO LOOK ONLY TO SUCH THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO.
23 * RECEIVER EXPRESSLY ACKNOWLEDGES THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO
24 * OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES CONTAINED IN MEDIATEK
25 * SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE
26 * RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
27 * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S
28 * ENTIRE AND CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE
29 * RELEASED HEREUNDER WILL BE, AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE
30 * MEDIATEK SOFTWARE AT ISSUE, OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE
31 * CHARGE PAID BY RECEIVER TO MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
32 *
33 * The following software/firmware and/or related documentation ("MediaTek
34 * Software") have been modified by MediaTek Inc. All revisions are subject to
35 * any receiver's applicable license agreements with MediaTek Inc.
36 */
37
38#ifndef __BOOTS_MT6XX_H__
39#define __BOOTS_MT6XX_H__
40
41#include <stdbool.h>
42/**
43 * Type definition
44 */
45#ifndef FALSE
46#define FALSE 0
47#endif
48#ifndef TRUE
49#define TRUE 1
50#endif
51#ifndef BOOL
52#define BOOL bool
53#endif
54
55typedef unsigned char UCHAR;
56typedef unsigned char UINT8;
57typedef unsigned short UINT16;
58typedef unsigned int UINT32;
59typedef char INT8;
60typedef short INT16;
61typedef int INT32;
62typedef long long INT64;
63typedef void VOID;
64typedef unsigned char* PUCHAR;
65
66
67/*
68 * Structure Definitions
69 */
70#define HCI_CMD_PARM_LEN 256
71#define MAX_EVENT_SIZE 256
72
73typedef struct _HCI_CMD_T {
74 UINT16 opCode; /* HCI command OpCode */
75 UINT8 len; /* Length of the command parameters */
76 UINT8 parms[HCI_CMD_PARM_LEN];
77} HCI_CMD_T;
78
79typedef struct _HCI_EVENT_T {
80 UINT8 event; /* HCI event type */
81 UINT8 len; /* Length of the event parameters */
82 UINT8 *parms; /* Event specific parameters */
83} HCI_EVENT_T;
84
85
86typedef enum _ENUM_BT_STATUS_T {
87 BT_STATUS_SUCCESS = 0,
88 BT_STATUS_FAILED,
89 BT_STATUS_PENDING,
90 BT_STATUS_BUSY,
91 BT_STATUS_NO_RESOURCES,
92 BT_STATUS_NOT_FOUND,
93 BT_STATUS_DEVICE_NOT_FOUND,
94 BT_STATUS_CONNECTION_FAILED,
95 BT_STATUS_TIMEOUT,
96 BT_STATUS_NO_CONNECTION,
97 BT_STATUS_INVALID_PARM,
98 BT_STATUS_IN_PROGRESS,
99 BT_STATUS_RESTRICTED,
100 BT_STATUS_INVALID_TYPE,
101 BT_STATUS_HCI_INIT_ERR,
102 BT_STATUS_NOT_SUPPORTED,
103 BT_STATUS_IN_USE,
104 BT_STATUS_SDP_CONT_STATE,
105 BT_STATUS_CANCELLED,
106 BT_STATUS_NOSERVICES,
107 BT_STATUS_SCO_REJECT,
108 BT_STATUS_CHIP_REASON,
109 BT_STATUS_BLOCK_LIST,
110 BT_STATUS_SCATTERNET_REJECT
111} ENUM_BT_STATUS_T;
112
113/* The record structure of bt nvram file */
114typedef struct
115{
116 unsigned char addr[6]; /* BT address */
117 unsigned char Voice[2]; /* Voice setting for SCO connection */
118 unsigned char Codec[4]; /* PCM codec setting */
119 unsigned char Radio[6]; /* RF configuration */
120 unsigned char Sleep[7]; /* Sleep mode configuration */
121 unsigned char BtFTR[2]; /* Other feature setting */
122 unsigned char TxPWOffset[3]; /* TX power channel offset compensation */
123 unsigned char CoexAdjust[6]; /* BT/WIFI coexistence performance adjustment */
124 unsigned char Radio_ext[2]; /* RF configuration extended parameters */
125 unsigned char TxPWOffset_ext[4]; /* Tx power channel offset compensation with new range */
126 unsigned char Reserved1[2]; /* Reserved */
127 unsigned char Reserved2[4]; /* Reserved */
128 unsigned char Reserved3[8]; /* Reserved */
129 unsigned char Reserved4[8]; /* Reserved */
130}__attribute__((packed)) ap_nvram_btradio_struct;
131
132
133typedef union {
134 ap_nvram_btradio_struct fields;
135 unsigned char raw[sizeof(ap_nvram_btradio_struct)];
136} BT_NVRAM_DATA_T;
137
138typedef ENUM_BT_STATUS_T (*HCI_CMD_FUNC_T)(VOID);
139typedef struct {
140 HCI_CMD_FUNC_T command_func;
141} HCI_SEQ_T;
142
143typedef struct {
144 UINT32 chip_id;
145 BT_NVRAM_DATA_T bt_nvram;
146 HCI_SEQ_T *cur_script;
147} BT_INIT_VAR_T;
148
149/*
150* Function Declaration
151*/
152#endif // __BOOTS_MT6XX_H__