| rjw | 1f88458 | 2022-01-06 17:20:42 +0800 | [diff] [blame^] | 1 | What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed |
| 2 | Date: April 2010 |
| 3 | Kernel Version: 2.6.35 |
| 4 | Contact: linux-bluetooth@vger.kernel.org |
| 5 | Description: |
| 6 | The /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed file |
| 7 | controls reporting speed of Wacom bluetooth tablet. Reading |
| 8 | from this file returns 1 if tablet reports in high speed mode |
| 9 | or 0 otherwise. Writing to this file one of these values |
| 10 | switches reporting speed. |
| 11 | |
| 12 | What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/led |
| 13 | Date: August 2014 |
| 14 | Contact: linux-input@vger.kernel.org |
| 15 | Description: |
| 16 | Attribute group for control of the status LEDs and the OLEDs. |
| 17 | This attribute group is only available for Intuos 4 M, L, |
| 18 | and XL (with LEDs and OLEDs), Intuos 4 WL, Intuos 5 (LEDs only), |
| 19 | Intuos Pro (LEDs only) and Cintiq 21UX2 and Cintiq 24HD |
| 20 | (LEDs only). Therefore its presence implicitly signifies the |
| 21 | presence of said LEDs and OLEDs on the tablet device. |
| 22 | |
| 23 | What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status0_luminance |
| 24 | Date: August 2014 |
| 25 | Contact: linux-input@vger.kernel.org |
| 26 | Description: |
| 27 | <obsoleted by the LED class API now exported by the driver> |
| 28 | Writing to this file sets the status LED luminance (1..127) |
| 29 | when the stylus does not touch the tablet surface, and no |
| 30 | button is pressed on the stylus. This luminance level is |
| 31 | normally lower than the level when a button is pressed. |
| 32 | |
| 33 | What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status1_luminance |
| 34 | Date: August 2014 |
| 35 | Contact: linux-input@vger.kernel.org |
| 36 | Description: |
| 37 | <obsoleted by the LED class API now exported by the driver> |
| 38 | Writing to this file sets the status LED luminance (1..127) |
| 39 | when the stylus touches the tablet surface, or any button is |
| 40 | pressed on the stylus. |
| 41 | |
| 42 | What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status_led0_select |
| 43 | Date: August 2014 |
| 44 | Contact: linux-input@vger.kernel.org |
| 45 | Description: |
| 46 | <obsoleted by the LED class API now exported by the driver> |
| 47 | Writing to this file sets which one of the four (for Intuos 4 |
| 48 | and Intuos 5) or of the right four (for Cintiq 21UX2 and Cintiq |
| 49 | 24HD) status LEDs is active (0..3). The other three LEDs on the |
| 50 | same side are always inactive. |
| 51 | |
| 52 | What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status_led1_select |
| 53 | Date: August 2014 |
| 54 | Contact: linux-input@vger.kernel.org |
| 55 | Description: |
| 56 | <obsoleted by the LED class API now exported by the driver> |
| 57 | Writing to this file sets which one of the left four (for Cintiq 21UX2 |
| 58 | and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on |
| 59 | the left are always inactive. |
| 60 | |
| 61 | What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/buttons_luminance |
| 62 | Date: August 2014 |
| 63 | Contact: linux-input@vger.kernel.org |
| 64 | Description: |
| 65 | Writing to this file sets the overall luminance level (0..15) |
| 66 | of all eight button OLED displays. |
| 67 | |
| 68 | What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/button<n>_rawimg |
| 69 | Date: August 2014 |
| 70 | Contact: linux-input@vger.kernel.org |
| 71 | Description: |
| 72 | When writing a 1024 byte raw image in Wacom Intuos 4 |
| 73 | interleaving format to the file, the image shows up on Button N |
| 74 | of the device. The image is a 64x32 pixel 4-bit gray image. The |
| 75 | 1024 byte binary is split up into 16x 64 byte chunks. Each 64 |
| 76 | byte chunk encodes the image data for two consecutive lines on |
| 77 | the display. The low nibble of each byte contains the first |
| 78 | line, and the high nibble contains the second line. |
| 79 | When the Wacom Intuos 4 is connected over Bluetooth, the |
| 80 | image has to contain 256 bytes (64x32 px 1 bit colour). |
| 81 | The format is also scrambled, like in the USB mode, and it can |
| 82 | be summarized by converting 76543210 into GECA6420. |
| 83 | HGFEDCBA HFDB7531 |
| 84 | |
| 85 | What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/unpair_remote |
| 86 | Date: July 2015 |
| 87 | Contact: linux-input@vger.kernel.org |
| 88 | Description: |
| 89 | Writing the character sequence '*' followed by a newline to |
| 90 | this file will delete all of the current pairings on the |
| 91 | device. Other character sequences are reserved. This file is |
| 92 | write only. |
| 93 | |
| 94 | What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/<serial_number>/remote_mode |
| 95 | Date: July 2015 |
| 96 | Contact: linux-input@vger.kernel.org |
| 97 | Description: |
| 98 | <obsoleted by the LED class API now exported by the driver> |
| 99 | Reading from this file reports the mode status of the |
| 100 | remote as indicated by the LED lights on the device. If no |
| 101 | reports have been received from the paired device, reading |
| 102 | from this file will report '-1'. The mode is read-only |
| 103 | and cannot be set through the driver. |