Gitiles
Code Review Sign In
192.168.1.100 / T103 / 1f884588077ad3476b9c91cbb0ee9ee0332bbb68 / . / src / kernel / linux / v4.14 / arch / arm / mach-davinci / Kconfig
blob: 05c3eecf47cb8364ae6a25f2c53c37dc8803f2fa [file] [log] [blame]
rjw1f884582022-01-06 17:20:42 +0800[diff] [blame^]1# SPDX-License-Identifier: GPL-2.0
2if ARCH_DAVINCI
3
4config AINTC
5 bool
6
7config CP_INTC
8 bool
9 select IRQ_DOMAIN
10
11config ARCH_DAVINCI_DMx
12 bool
13
14menu "TI DaVinci Implementations"
15
16comment "DaVinci Core Type"
17
18config ARCH_DAVINCI_DM644x
19 bool "DaVinci 644x based system"
20 select AINTC
21 select ARCH_DAVINCI_DMx
22
23config ARCH_DAVINCI_DM355
24 bool "DaVinci 355 based system"
25 select AINTC
26 select ARCH_DAVINCI_DMx
27
28config ARCH_DAVINCI_DM646x
29 bool "DaVinci 646x based system"
30 select AINTC
31 select ARCH_DAVINCI_DMx
32
33config ARCH_DAVINCI_DA830
34 bool "DA830/OMAP-L137/AM17x based system"
35 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
36 select ARCH_DAVINCI_DA8XX
37 # needed on silicon revs 1.0, 1.1:
38 select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
39 select CP_INTC
40
41config ARCH_DAVINCI_DA850
42 bool "DA850/OMAP-L138/AM18x based system"
43 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
44 select ARCH_DAVINCI_DA8XX
45 select CP_INTC
46
47config ARCH_DAVINCI_DA8XX
48 bool
49
50config ARCH_DAVINCI_DM365
51 bool "DaVinci 365 based system"
52 select AINTC
53 select ARCH_DAVINCI_DMx
54
55comment "DaVinci Board Type"
56
57config MACH_DA8XX_DT
58 bool "Support DA8XX platforms using device tree"
59 default y
60 depends on ARCH_DAVINCI_DA850
61 select PINCTRL
62 help
63 Say y here to include support for TI DaVinci DA850 based using
64 Flattened Device Tree. More information at Documentation/devicetree
65
66config MACH_DAVINCI_EVM
67 bool "TI DM644x EVM"
68 default ARCH_DAVINCI_DM644x
69 depends on ARCH_DAVINCI_DM644x
70 help
71 Configure this option to specify the whether the board used
72 for development is a DM644x EVM
73
74config MACH_SFFSDR
75 bool "Lyrtech SFFSDR"
76 depends on ARCH_DAVINCI_DM644x
77 help
78 Say Y here to select the Lyrtech Small Form Factor
79 Software Defined Radio (SFFSDR) board.
80
81config MACH_NEUROS_OSD2
82 bool "Neuros OSD2 Open Television Set Top Box"
83 depends on ARCH_DAVINCI_DM644x
84 help
85 Configure this option to specify the whether the board used
86 for development is a Neuros OSD2 Open Set Top Box.
87
88config MACH_DAVINCI_DM355_EVM
89 bool "TI DM355 EVM"
90 default ARCH_DAVINCI_DM355
91 depends on ARCH_DAVINCI_DM355
92 help
93 Configure this option to specify the whether the board used
94 for development is a DM355 EVM
95
96config MACH_DM355_LEOPARD
97 bool "DM355 Leopard board"
98 depends on ARCH_DAVINCI_DM355
99 help
100 Configure this option to specify the whether the board used
101 for development is a DM355 Leopard board.
102
103config MACH_DAVINCI_DM6467_EVM
104 bool "TI DM6467 EVM"
105 default ARCH_DAVINCI_DM646x
106 depends on ARCH_DAVINCI_DM646x
107 select MACH_DAVINCI_DM6467TEVM
108 help
109 Configure this option to specify the whether the board used
110 for development is a DM6467 EVM
111
112config MACH_DAVINCI_DM6467TEVM
113 bool
114
115config MACH_DAVINCI_DM365_EVM
116 bool "TI DM365 EVM"
117 default ARCH_DAVINCI_DM365
118 depends on ARCH_DAVINCI_DM365
119 help
120 Configure this option to specify whether the board used
121 for development is a DM365 EVM
122
123config MACH_DAVINCI_DA830_EVM
124 bool "TI DA830/OMAP-L137/AM17x Reference Platform"
125 default ARCH_DAVINCI_DA830
126 depends on ARCH_DAVINCI_DA830
127 select GPIO_PCF857X if I2C
128 help
129 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
130
131choice
132 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
133 depends on MACH_DAVINCI_DA830_EVM
134 help
135 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
136 detected automatically based on successful probe of the I2C
137 based GPIO expander on that board. This option selected in this
138 menu has an effect only in case of a successful UI card detection.
139
140config DA830_UI_LCD
141 bool "LCD"
142 help
143 Say Y here to use the LCD as a framebuffer or simple character
144 display.
145
146config DA830_UI_NAND
147 bool "NAND flash"
148 help
149 Say Y here to use the NAND flash. Do not forget to setup
150 the switch correctly.
151endchoice
152
153config MACH_DAVINCI_DA850_EVM
154 bool "TI DA850/OMAP-L138/AM18x Reference Platform"
155 default ARCH_DAVINCI_DA850
156 depends on ARCH_DAVINCI_DA850
157 help
158 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
159
160choice
161 prompt "Select peripherals connected to expander on UI board"
162 depends on MACH_DAVINCI_DA850_EVM
163 help
164 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
165 EVM is detected automatically based on successful probe of the I2C
166 based GPIO expander on that card. This option selected in this
167 menu has an effect only in case of a successful UI card detection.
168
169config DA850_UI_NONE
170 bool "No peripheral is enabled"
171 help
172 Say Y if you do not want to enable any of the peripherals connected
173 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
174
175config DA850_UI_RMII
176 bool "RMII Ethernet PHY"
177 help
178 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
179 EVM. This PHY is found on the UI daughter card that is supplied with
180 the EVM.
181 NOTE: Please take care while choosing this option, MII PHY will
182 not be functional if RMII mode is selected.
183
184config DA850_UI_SD_VIDEO_PORT
185 bool "Video Port Interface"
186 help
187 Say Y if you want to use Video Port Interface (VPIF) on the
188 DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
189 UI daughter card that is supplied with the EVM.
190
191endchoice
192
193config MACH_MITYOMAPL138
194 bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
195 depends on ARCH_DAVINCI_DA850
196 help
197 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
198 System on Module. Information on this SoM may be found at
199 http://www.mitydsp.com
200
201config MACH_OMAPL138_HAWKBOARD
202 bool "TI AM1808 / OMAPL-138 Hawkboard platform"
203 depends on ARCH_DAVINCI_DA850
204 help
205 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
206 Information of this board may be found at
207 http://www.hawkboard.org/
208
209config DAVINCI_MUX
210 bool "DAVINCI multiplexing support"
211 depends on ARCH_DAVINCI
212 default y
213 help
214 Pin multiplexing support for DAVINCI boards. If your bootloader
215 sets the multiplexing correctly, say N. Otherwise, or if unsure,
216 say Y.
217
218config DAVINCI_MUX_DEBUG
219 bool "Multiplexing debug output"
220 depends on DAVINCI_MUX
221 help
222 Makes the multiplexing functions print out a lot of debug info.
223 This is useful if you want to find out the correct values of the
224 multiplexing registers.
225
226config DAVINCI_MUX_WARNINGS
227 bool "Warn about pins the bootloader didn't set up"
228 depends on DAVINCI_MUX
229 help
230 Choose Y here to warn whenever driver initialization logic needs
231 to change the pin multiplexing setup. When there are no warnings
232 printed, it's safe to deselect DAVINCI_MUX for your product.
233
234config DAVINCI_RESET_CLOCKS
235 bool "Reset unused clocks during boot"
236 depends on ARCH_DAVINCI
237 help
238 Say Y if you want to reset unused clocks during boot.
239 This option saves power, but assumes all drivers are
240 using the clock framework. Broken drivers that do not
241 yet use clock framework may not work with this option.
242 If you are booting from another operating system, you
243 probably do not want this option enabled until your
244 device drivers work properly.
245
246endmenu
247
248endif