rjw | 1f88458 | 2022-01-06 17:20:42 +0800 | [diff] [blame^] | 1 | /* |
| 2 | * Copyright (C) 2008, 2009 Provigent Ltd. |
| 3 | * |
| 4 | * Author: Baruch Siach <baruch@tkos.co.il> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License version 2 as |
| 8 | * published by the Free Software Foundation. |
| 9 | * |
| 10 | * Driver for the ARM PrimeCell(tm) General Purpose Input/Output (PL061) |
| 11 | * |
| 12 | * Data sheet: ARM DDI 0190B, September 2000 |
| 13 | */ |
| 14 | #include <linux/spinlock.h> |
| 15 | #include <linux/errno.h> |
| 16 | #include <linux/init.h> |
| 17 | #include <linux/io.h> |
| 18 | #include <linux/ioport.h> |
| 19 | #include <linux/interrupt.h> |
| 20 | #include <linux/irq.h> |
| 21 | #include <linux/irqchip/chained_irq.h> |
| 22 | #include <linux/bitops.h> |
| 23 | #include <linux/gpio.h> |
| 24 | #include <linux/device.h> |
| 25 | #include <linux/amba/bus.h> |
| 26 | #include <linux/slab.h> |
| 27 | #include <linux/pinctrl/consumer.h> |
| 28 | #include <linux/pm.h> |
| 29 | |
| 30 | #define GPIODIR 0x400 |
| 31 | #define GPIOIS 0x404 |
| 32 | #define GPIOIBE 0x408 |
| 33 | #define GPIOIEV 0x40C |
| 34 | #define GPIOIE 0x410 |
| 35 | #define GPIORIS 0x414 |
| 36 | #define GPIOMIS 0x418 |
| 37 | #define GPIOIC 0x41C |
| 38 | |
| 39 | #define PL061_GPIO_NR 8 |
| 40 | |
| 41 | #ifdef CONFIG_PM |
| 42 | struct pl061_context_save_regs { |
| 43 | u8 gpio_data; |
| 44 | u8 gpio_dir; |
| 45 | u8 gpio_is; |
| 46 | u8 gpio_ibe; |
| 47 | u8 gpio_iev; |
| 48 | u8 gpio_ie; |
| 49 | }; |
| 50 | #endif |
| 51 | |
| 52 | struct pl061 { |
| 53 | raw_spinlock_t lock; |
| 54 | |
| 55 | void __iomem *base; |
| 56 | struct gpio_chip gc; |
| 57 | struct irq_chip irq_chip; |
| 58 | int parent_irq; |
| 59 | |
| 60 | #ifdef CONFIG_PM |
| 61 | struct pl061_context_save_regs csave_regs; |
| 62 | #endif |
| 63 | }; |
| 64 | |
| 65 | static int pl061_get_direction(struct gpio_chip *gc, unsigned offset) |
| 66 | { |
| 67 | struct pl061 *pl061 = gpiochip_get_data(gc); |
| 68 | |
| 69 | return !(readb(pl061->base + GPIODIR) & BIT(offset)); |
| 70 | } |
| 71 | |
| 72 | static int pl061_direction_input(struct gpio_chip *gc, unsigned offset) |
| 73 | { |
| 74 | struct pl061 *pl061 = gpiochip_get_data(gc); |
| 75 | unsigned long flags; |
| 76 | unsigned char gpiodir; |
| 77 | |
| 78 | raw_spin_lock_irqsave(&pl061->lock, flags); |
| 79 | gpiodir = readb(pl061->base + GPIODIR); |
| 80 | gpiodir &= ~(BIT(offset)); |
| 81 | writeb(gpiodir, pl061->base + GPIODIR); |
| 82 | raw_spin_unlock_irqrestore(&pl061->lock, flags); |
| 83 | |
| 84 | return 0; |
| 85 | } |
| 86 | |
| 87 | static int pl061_direction_output(struct gpio_chip *gc, unsigned offset, |
| 88 | int value) |
| 89 | { |
| 90 | struct pl061 *pl061 = gpiochip_get_data(gc); |
| 91 | unsigned long flags; |
| 92 | unsigned char gpiodir; |
| 93 | |
| 94 | raw_spin_lock_irqsave(&pl061->lock, flags); |
| 95 | writeb(!!value << offset, pl061->base + (BIT(offset + 2))); |
| 96 | gpiodir = readb(pl061->base + GPIODIR); |
| 97 | gpiodir |= BIT(offset); |
| 98 | writeb(gpiodir, pl061->base + GPIODIR); |
| 99 | |
| 100 | /* |
| 101 | * gpio value is set again, because pl061 doesn't allow to set value of |
| 102 | * a gpio pin before configuring it in OUT mode. |
| 103 | */ |
| 104 | writeb(!!value << offset, pl061->base + (BIT(offset + 2))); |
| 105 | raw_spin_unlock_irqrestore(&pl061->lock, flags); |
| 106 | |
| 107 | return 0; |
| 108 | } |
| 109 | |
| 110 | static int pl061_get_value(struct gpio_chip *gc, unsigned offset) |
| 111 | { |
| 112 | struct pl061 *pl061 = gpiochip_get_data(gc); |
| 113 | |
| 114 | return !!readb(pl061->base + (BIT(offset + 2))); |
| 115 | } |
| 116 | |
| 117 | static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value) |
| 118 | { |
| 119 | struct pl061 *pl061 = gpiochip_get_data(gc); |
| 120 | |
| 121 | writeb(!!value << offset, pl061->base + (BIT(offset + 2))); |
| 122 | } |
| 123 | |
| 124 | static int pl061_irq_type(struct irq_data *d, unsigned trigger) |
| 125 | { |
| 126 | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| 127 | struct pl061 *pl061 = gpiochip_get_data(gc); |
| 128 | int offset = irqd_to_hwirq(d); |
| 129 | unsigned long flags; |
| 130 | u8 gpiois, gpioibe, gpioiev; |
| 131 | u8 bit = BIT(offset); |
| 132 | |
| 133 | if (offset < 0 || offset >= PL061_GPIO_NR) |
| 134 | return -EINVAL; |
| 135 | |
| 136 | if ((trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) && |
| 137 | (trigger & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))) |
| 138 | { |
| 139 | dev_err(gc->parent, |
| 140 | "trying to configure line %d for both level and edge " |
| 141 | "detection, choose one!\n", |
| 142 | offset); |
| 143 | return -EINVAL; |
| 144 | } |
| 145 | |
| 146 | |
| 147 | raw_spin_lock_irqsave(&pl061->lock, flags); |
| 148 | |
| 149 | gpioiev = readb(pl061->base + GPIOIEV); |
| 150 | gpiois = readb(pl061->base + GPIOIS); |
| 151 | gpioibe = readb(pl061->base + GPIOIBE); |
| 152 | |
| 153 | if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { |
| 154 | bool polarity = trigger & IRQ_TYPE_LEVEL_HIGH; |
| 155 | |
| 156 | /* Disable edge detection */ |
| 157 | gpioibe &= ~bit; |
| 158 | /* Enable level detection */ |
| 159 | gpiois |= bit; |
| 160 | /* Select polarity */ |
| 161 | if (polarity) |
| 162 | gpioiev |= bit; |
| 163 | else |
| 164 | gpioiev &= ~bit; |
| 165 | irq_set_handler_locked(d, handle_level_irq); |
| 166 | dev_dbg(gc->parent, "line %d: IRQ on %s level\n", |
| 167 | offset, |
| 168 | polarity ? "HIGH" : "LOW"); |
| 169 | } else if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { |
| 170 | /* Disable level detection */ |
| 171 | gpiois &= ~bit; |
| 172 | /* Select both edges, setting this makes GPIOEV be ignored */ |
| 173 | gpioibe |= bit; |
| 174 | irq_set_handler_locked(d, handle_edge_irq); |
| 175 | dev_dbg(gc->parent, "line %d: IRQ on both edges\n", offset); |
| 176 | } else if ((trigger & IRQ_TYPE_EDGE_RISING) || |
| 177 | (trigger & IRQ_TYPE_EDGE_FALLING)) { |
| 178 | bool rising = trigger & IRQ_TYPE_EDGE_RISING; |
| 179 | |
| 180 | /* Disable level detection */ |
| 181 | gpiois &= ~bit; |
| 182 | /* Clear detection on both edges */ |
| 183 | gpioibe &= ~bit; |
| 184 | /* Select edge */ |
| 185 | if (rising) |
| 186 | gpioiev |= bit; |
| 187 | else |
| 188 | gpioiev &= ~bit; |
| 189 | irq_set_handler_locked(d, handle_edge_irq); |
| 190 | dev_dbg(gc->parent, "line %d: IRQ on %s edge\n", |
| 191 | offset, |
| 192 | rising ? "RISING" : "FALLING"); |
| 193 | } else { |
| 194 | /* No trigger: disable everything */ |
| 195 | gpiois &= ~bit; |
| 196 | gpioibe &= ~bit; |
| 197 | gpioiev &= ~bit; |
| 198 | irq_set_handler_locked(d, handle_bad_irq); |
| 199 | dev_warn(gc->parent, "no trigger selected for line %d\n", |
| 200 | offset); |
| 201 | } |
| 202 | |
| 203 | writeb(gpiois, pl061->base + GPIOIS); |
| 204 | writeb(gpioibe, pl061->base + GPIOIBE); |
| 205 | writeb(gpioiev, pl061->base + GPIOIEV); |
| 206 | |
| 207 | raw_spin_unlock_irqrestore(&pl061->lock, flags); |
| 208 | |
| 209 | return 0; |
| 210 | } |
| 211 | |
| 212 | static void pl061_irq_handler(struct irq_desc *desc) |
| 213 | { |
| 214 | unsigned long pending; |
| 215 | int offset; |
| 216 | struct gpio_chip *gc = irq_desc_get_handler_data(desc); |
| 217 | struct pl061 *pl061 = gpiochip_get_data(gc); |
| 218 | struct irq_chip *irqchip = irq_desc_get_chip(desc); |
| 219 | |
| 220 | chained_irq_enter(irqchip, desc); |
| 221 | |
| 222 | pending = readb(pl061->base + GPIOMIS); |
| 223 | if (pending) { |
| 224 | for_each_set_bit(offset, &pending, PL061_GPIO_NR) |
| 225 | generic_handle_irq(irq_find_mapping(gc->irqdomain, |
| 226 | offset)); |
| 227 | } |
| 228 | |
| 229 | chained_irq_exit(irqchip, desc); |
| 230 | } |
| 231 | |
| 232 | static void pl061_irq_mask(struct irq_data *d) |
| 233 | { |
| 234 | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| 235 | struct pl061 *pl061 = gpiochip_get_data(gc); |
| 236 | u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR); |
| 237 | u8 gpioie; |
| 238 | |
| 239 | raw_spin_lock(&pl061->lock); |
| 240 | gpioie = readb(pl061->base + GPIOIE) & ~mask; |
| 241 | writeb(gpioie, pl061->base + GPIOIE); |
| 242 | raw_spin_unlock(&pl061->lock); |
| 243 | } |
| 244 | |
| 245 | static void pl061_irq_unmask(struct irq_data *d) |
| 246 | { |
| 247 | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| 248 | struct pl061 *pl061 = gpiochip_get_data(gc); |
| 249 | u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR); |
| 250 | u8 gpioie; |
| 251 | |
| 252 | raw_spin_lock(&pl061->lock); |
| 253 | gpioie = readb(pl061->base + GPIOIE) | mask; |
| 254 | writeb(gpioie, pl061->base + GPIOIE); |
| 255 | raw_spin_unlock(&pl061->lock); |
| 256 | } |
| 257 | |
| 258 | /** |
| 259 | * pl061_irq_ack() - ACK an edge IRQ |
| 260 | * @d: IRQ data for this IRQ |
| 261 | * |
| 262 | * This gets called from the edge IRQ handler to ACK the edge IRQ |
| 263 | * in the GPIOIC (interrupt-clear) register. For level IRQs this is |
| 264 | * not needed: these go away when the level signal goes away. |
| 265 | */ |
| 266 | static void pl061_irq_ack(struct irq_data *d) |
| 267 | { |
| 268 | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| 269 | struct pl061 *pl061 = gpiochip_get_data(gc); |
| 270 | u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR); |
| 271 | |
| 272 | raw_spin_lock(&pl061->lock); |
| 273 | writeb(mask, pl061->base + GPIOIC); |
| 274 | raw_spin_unlock(&pl061->lock); |
| 275 | } |
| 276 | |
| 277 | static int pl061_irq_set_wake(struct irq_data *d, unsigned int state) |
| 278 | { |
| 279 | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| 280 | struct pl061 *pl061 = gpiochip_get_data(gc); |
| 281 | |
| 282 | return irq_set_irq_wake(pl061->parent_irq, state); |
| 283 | } |
| 284 | |
| 285 | static int pl061_probe(struct amba_device *adev, const struct amba_id *id) |
| 286 | { |
| 287 | struct device *dev = &adev->dev; |
| 288 | struct pl061 *pl061; |
| 289 | int ret, irq; |
| 290 | |
| 291 | pl061 = devm_kzalloc(dev, sizeof(*pl061), GFP_KERNEL); |
| 292 | if (pl061 == NULL) |
| 293 | return -ENOMEM; |
| 294 | |
| 295 | pl061->base = devm_ioremap_resource(dev, &adev->res); |
| 296 | if (IS_ERR(pl061->base)) |
| 297 | return PTR_ERR(pl061->base); |
| 298 | |
| 299 | raw_spin_lock_init(&pl061->lock); |
| 300 | if (of_property_read_bool(dev->of_node, "gpio-ranges")) { |
| 301 | pl061->gc.request = gpiochip_generic_request; |
| 302 | pl061->gc.free = gpiochip_generic_free; |
| 303 | } |
| 304 | |
| 305 | pl061->gc.base = -1; |
| 306 | pl061->gc.get_direction = pl061_get_direction; |
| 307 | pl061->gc.direction_input = pl061_direction_input; |
| 308 | pl061->gc.direction_output = pl061_direction_output; |
| 309 | pl061->gc.get = pl061_get_value; |
| 310 | pl061->gc.set = pl061_set_value; |
| 311 | pl061->gc.ngpio = PL061_GPIO_NR; |
| 312 | pl061->gc.label = dev_name(dev); |
| 313 | pl061->gc.parent = dev; |
| 314 | pl061->gc.owner = THIS_MODULE; |
| 315 | |
| 316 | ret = gpiochip_add_data(&pl061->gc, pl061); |
| 317 | if (ret) |
| 318 | return ret; |
| 319 | |
| 320 | /* |
| 321 | * irq_chip support |
| 322 | */ |
| 323 | pl061->irq_chip.name = dev_name(dev); |
| 324 | pl061->irq_chip.irq_ack = pl061_irq_ack; |
| 325 | pl061->irq_chip.irq_mask = pl061_irq_mask; |
| 326 | pl061->irq_chip.irq_unmask = pl061_irq_unmask; |
| 327 | pl061->irq_chip.irq_set_type = pl061_irq_type; |
| 328 | pl061->irq_chip.irq_set_wake = pl061_irq_set_wake; |
| 329 | |
| 330 | writeb(0, pl061->base + GPIOIE); /* disable irqs */ |
| 331 | irq = adev->irq[0]; |
| 332 | if (irq < 0) { |
| 333 | dev_err(&adev->dev, "invalid IRQ\n"); |
| 334 | return -ENODEV; |
| 335 | } |
| 336 | pl061->parent_irq = irq; |
| 337 | |
| 338 | ret = gpiochip_irqchip_add(&pl061->gc, &pl061->irq_chip, |
| 339 | 0, handle_bad_irq, |
| 340 | IRQ_TYPE_NONE); |
| 341 | if (ret) { |
| 342 | dev_info(&adev->dev, "could not add irqchip\n"); |
| 343 | return ret; |
| 344 | } |
| 345 | gpiochip_set_chained_irqchip(&pl061->gc, &pl061->irq_chip, |
| 346 | irq, pl061_irq_handler); |
| 347 | |
| 348 | amba_set_drvdata(adev, pl061); |
| 349 | dev_info(&adev->dev, "PL061 GPIO chip @%pa registered\n", |
| 350 | &adev->res.start); |
| 351 | |
| 352 | return 0; |
| 353 | } |
| 354 | |
| 355 | #ifdef CONFIG_PM |
| 356 | static int pl061_suspend(struct device *dev) |
| 357 | { |
| 358 | struct pl061 *pl061 = dev_get_drvdata(dev); |
| 359 | int offset; |
| 360 | |
| 361 | pl061->csave_regs.gpio_data = 0; |
| 362 | pl061->csave_regs.gpio_dir = readb(pl061->base + GPIODIR); |
| 363 | pl061->csave_regs.gpio_is = readb(pl061->base + GPIOIS); |
| 364 | pl061->csave_regs.gpio_ibe = readb(pl061->base + GPIOIBE); |
| 365 | pl061->csave_regs.gpio_iev = readb(pl061->base + GPIOIEV); |
| 366 | pl061->csave_regs.gpio_ie = readb(pl061->base + GPIOIE); |
| 367 | |
| 368 | for (offset = 0; offset < PL061_GPIO_NR; offset++) { |
| 369 | if (pl061->csave_regs.gpio_dir & (BIT(offset))) |
| 370 | pl061->csave_regs.gpio_data |= |
| 371 | pl061_get_value(&pl061->gc, offset) << offset; |
| 372 | } |
| 373 | |
| 374 | return 0; |
| 375 | } |
| 376 | |
| 377 | static int pl061_resume(struct device *dev) |
| 378 | { |
| 379 | struct pl061 *pl061 = dev_get_drvdata(dev); |
| 380 | int offset; |
| 381 | |
| 382 | for (offset = 0; offset < PL061_GPIO_NR; offset++) { |
| 383 | if (pl061->csave_regs.gpio_dir & (BIT(offset))) |
| 384 | pl061_direction_output(&pl061->gc, offset, |
| 385 | pl061->csave_regs.gpio_data & |
| 386 | (BIT(offset))); |
| 387 | else |
| 388 | pl061_direction_input(&pl061->gc, offset); |
| 389 | } |
| 390 | |
| 391 | writeb(pl061->csave_regs.gpio_is, pl061->base + GPIOIS); |
| 392 | writeb(pl061->csave_regs.gpio_ibe, pl061->base + GPIOIBE); |
| 393 | writeb(pl061->csave_regs.gpio_iev, pl061->base + GPIOIEV); |
| 394 | writeb(pl061->csave_regs.gpio_ie, pl061->base + GPIOIE); |
| 395 | |
| 396 | return 0; |
| 397 | } |
| 398 | |
| 399 | static const struct dev_pm_ops pl061_dev_pm_ops = { |
| 400 | .suspend = pl061_suspend, |
| 401 | .resume = pl061_resume, |
| 402 | .freeze = pl061_suspend, |
| 403 | .restore = pl061_resume, |
| 404 | }; |
| 405 | #endif |
| 406 | |
| 407 | static const struct amba_id pl061_ids[] = { |
| 408 | { |
| 409 | .id = 0x00041061, |
| 410 | .mask = 0x000fffff, |
| 411 | }, |
| 412 | { 0, 0 }, |
| 413 | }; |
| 414 | |
| 415 | static struct amba_driver pl061_gpio_driver = { |
| 416 | .drv = { |
| 417 | .name = "pl061_gpio", |
| 418 | #ifdef CONFIG_PM |
| 419 | .pm = &pl061_dev_pm_ops, |
| 420 | #endif |
| 421 | }, |
| 422 | .id_table = pl061_ids, |
| 423 | .probe = pl061_probe, |
| 424 | }; |
| 425 | |
| 426 | static int __init pl061_gpio_init(void) |
| 427 | { |
| 428 | return amba_driver_register(&pl061_gpio_driver); |
| 429 | } |
| 430 | device_initcall(pl061_gpio_init); |