Gitiles
Code Review Sign In
192.168.1.100 / T103 / 1f884588077ad3476b9c91cbb0ee9ee0332bbb68 / . / src / kernel / linux / v4.14 / drivers / iio / pressure / Kconfig
blob: eaa7cfcb4c2aa611448cb6cc8c47c167dae44b19 [file] [log] [blame]
rjw1f884582022-01-06 17:20:42 +0800[diff] [blame^]1#
2# Pressure drivers
3#
4# When adding new entries keep the list in alphabetical order
5
6menu "Pressure sensors"
7
8config ABP060MG
9 tristate "Honeywell ABP pressure sensor driver"
10 depends on I2C
11 help
12 Say yes here to build support for the Honeywell ABP pressure
13 sensors.
14
15 To compile this driver as a module, choose M here: the module
16 will be called abp060mg.
17
18config BMP280
19 tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver"
20 depends on (I2C || SPI_MASTER)
21 select REGMAP
22 select BMP280_I2C if (I2C)
23 select BMP280_SPI if (SPI_MASTER)
24 help
25 Say yes here to build support for Bosch Sensortec BMP180 and BMP280
26 pressure and temperature sensors. Also supports the BME280 with
27 an additional humidity sensor channel.
28
29 To compile this driver as a module, choose M here: the core module
30 will be called bmp280 and you will also get bmp280-i2c for I2C
31 and/or bmp280-spi for SPI support.
32
33config BMP280_I2C
34 tristate
35 depends on BMP280
36 depends on I2C
37 select REGMAP_I2C
38
39config BMP280_SPI
40 tristate
41 depends on BMP280
42 depends on SPI_MASTER
43 select REGMAP
44
45config IIO_CROS_EC_BARO
46 tristate "ChromeOS EC Barometer Sensor"
47 depends on IIO_CROS_EC_SENSORS_CORE
48 help
49 Say yes here to build support for the Barometer sensor when
50 presented by the ChromeOS EC Sensor hub.
51
52 To compile this driver as a module, choose M here: the module
53 will be called cros_ec_baro.
54
55config HID_SENSOR_PRESS
56 depends on HID_SENSOR_HUB
57 select IIO_BUFFER
58 select IIO_TRIGGERED_BUFFER
59 select HID_SENSOR_IIO_COMMON
60 select HID_SENSOR_IIO_TRIGGER
61 tristate "HID PRESS"
62 help
63 Say yes here to build support for the HID SENSOR
64 Pressure driver
65
66 To compile this driver as a module, choose M here: the module
67 will be called hid-sensor-press.
68
69config HP03
70 tristate "Hope RF HP03 temperature and pressure sensor driver"
71 depends on I2C
72 select REGMAP_I2C
73 help
74 Say yes here to build support for Hope RF HP03 pressure and
75 temperature sensor.
76
77 To compile this driver as a module, choose M here: the module
78 will be called hp03.
79
80config MPL115
81 tristate
82
83config MPL115_I2C
84 tristate "Freescale MPL115A2 pressure sensor driver"
85 depends on I2C
86 select MPL115
87 help
88 Say yes here to build support for the Freescale MPL115A2
89 pressure sensor connected via I2C.
90
91 To compile this driver as a module, choose M here: the module
92 will be called mpl115_i2c.
93
94config MPL115_SPI
95 tristate "Freescale MPL115A1 pressure sensor driver"
96 depends on SPI_MASTER
97 select MPL115
98 help
99 Say yes here to build support for the Freescale MPL115A1
100 pressure sensor connected via SPI.
101
102 To compile this driver as a module, choose M here: the module
103 will be called mpl115_spi.
104
105config MPL3115
106 tristate "Freescale MPL3115A2 pressure sensor driver"
107 depends on I2C
108 select IIO_BUFFER
109 select IIO_TRIGGERED_BUFFER
110 help
111 Say yes here to build support for the Freescale MPL3115A2
112 pressure sensor / altimeter.
113
114 To compile this driver as a module, choose M here: the module
115 will be called mpl3115.
116
117config MS5611
118 tristate "Measurement Specialties MS5611 pressure sensor driver"
119 select IIO_BUFFER
120 select IIO_TRIGGERED_BUFFER
121 help
122 Say Y here to build support for the Measurement Specialties
123 MS5611, MS5607 pressure and temperature sensors.
124
125 To compile this driver as a module, choose M here: the module will
126 be called ms5611_core.
127
128config MS5611_I2C
129 tristate "support I2C bus connection"
130 depends on I2C && MS5611
131 help
132 Say Y here to build I2C bus support for MS5611.
133
134 To compile this driver as a module, choose M here: the module will
135 be called ms5611_i2c.
136
137config MS5611_SPI
138 tristate "support SPI bus connection"
139 depends on SPI_MASTER && MS5611
140 help
141 Say Y here to build SPI bus support for MS5611.
142
143 To compile this driver as a module, choose M here: the module will
144 be called ms5611_spi.
145
146config MS5637
147 tristate "Measurement Specialties MS5637 pressure & temperature sensor"
148 depends on I2C
149 select IIO_MS_SENSORS_I2C
150 help
151 If you say yes here you get support for the Measurement Specialties
152 MS5637 pressure and temperature sensor.
153 This driver is also used for MS8607 temperature, pressure & humidity
154 sensor
155
156 This driver can also be built as a module. If so, the module will
157 be called ms5637.
158
159config IIO_ST_PRESS
160 tristate "STMicroelectronics pressure sensor Driver"
161 depends on (I2C || SPI_MASTER) && SYSFS
162 select IIO_ST_SENSORS_CORE
163 select IIO_ST_PRESS_I2C if (I2C)
164 select IIO_ST_PRESS_SPI if (SPI_MASTER)
165 select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
166 help
167 Say yes here to build support for STMicroelectronics pressure
168 sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB.
169
170 This driver can also be built as a module. If so, these modules
171 will be created:
172 - st_pressure (core functions for the driver [it is mandatory]);
173 - st_pressure_i2c (necessary for the I2C devices [optional*]);
174 - st_pressure_spi (necessary for the SPI devices [optional*]);
175
176 (*) one of these is necessary to do something.
177
178config IIO_ST_PRESS_I2C
179 tristate
180 depends on IIO_ST_PRESS
181 depends on IIO_ST_SENSORS_I2C
182
183config IIO_ST_PRESS_SPI
184 tristate
185 depends on IIO_ST_PRESS
186 depends on IIO_ST_SENSORS_SPI
187
188config T5403
189 tristate "EPCOS T5403 digital barometric pressure sensor driver"
190 depends on I2C
191 help
192 Say yes here to build support for the EPCOS T5403 pressure sensor
193 connected via I2C.
194
195 To compile this driver as a module, choose M here: the module
196 will be called t5403.
197
198config HP206C
199 tristate "HOPERF HP206C precision barometer and altimeter sensor"
200 depends on I2C
201 help
202 Say yes here to build support for the HOPREF HP206C precision
203 barometer and altimeter sensor.
204
205 This driver can also be built as a module. If so, the module will
206 be called hp206c.
207
208config ZPA2326
209 tristate "Murata ZPA2326 pressure sensor driver"
210 select IIO_BUFFER
211 select IIO_TRIGGERED_BUFFER
212 select REGMAP
213 select ZPA2326_I2C if I2C
214 select ZPA2326_SPI if SPI_MASTER
215 help
216 Say Y here to build support for the Murata ZPA2326 pressure and
217 temperature sensor.
218
219 To compile this driver as a module, choose M here: the module will
220 be called zpa2326.
221
222config ZPA2326_I2C
223 tristate
224 select REGMAP_I2C
225
226config ZPA2326_SPI
227 tristate
228 select REGMAP_SPI
229
230endmenu