rjw | 1f88458 | 2022-01-06 17:20:42 +0800 | [diff] [blame^] | 1 | /* |
| 2 | * Synopsys G210 Test Chip driver |
| 3 | * |
| 4 | * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) |
| 5 | * |
| 6 | * Authors: Joao Pinto <jpinto@synopsys.com> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License version 2 as |
| 10 | * published by the Free Software Foundation. |
| 11 | */ |
| 12 | |
| 13 | #include "ufshcd.h" |
| 14 | #include "ufshcd-dwc.h" |
| 15 | #include "tc-dwc-g210.h" |
| 16 | |
| 17 | #include <linux/pci.h> |
| 18 | #include <linux/pm_runtime.h> |
| 19 | |
| 20 | /* Test Chip type expected values */ |
| 21 | #define TC_G210_20BIT 20 |
| 22 | #define TC_G210_40BIT 40 |
| 23 | #define TC_G210_INV 0 |
| 24 | |
| 25 | static int tc_type = TC_G210_INV; |
| 26 | module_param(tc_type, int, 0); |
| 27 | MODULE_PARM_DESC(tc_type, "Test Chip Type (20 = 20-bit, 40 = 40-bit)"); |
| 28 | |
| 29 | static int tc_dwc_g210_pci_suspend(struct device *dev) |
| 30 | { |
| 31 | return ufshcd_system_suspend(dev_get_drvdata(dev)); |
| 32 | } |
| 33 | |
| 34 | static int tc_dwc_g210_pci_resume(struct device *dev) |
| 35 | { |
| 36 | return ufshcd_system_resume(dev_get_drvdata(dev)); |
| 37 | } |
| 38 | |
| 39 | static int tc_dwc_g210_pci_runtime_suspend(struct device *dev) |
| 40 | { |
| 41 | return ufshcd_runtime_suspend(dev_get_drvdata(dev)); |
| 42 | } |
| 43 | |
| 44 | static int tc_dwc_g210_pci_runtime_resume(struct device *dev) |
| 45 | { |
| 46 | return ufshcd_runtime_resume(dev_get_drvdata(dev)); |
| 47 | } |
| 48 | |
| 49 | static int tc_dwc_g210_pci_runtime_idle(struct device *dev) |
| 50 | { |
| 51 | return ufshcd_runtime_idle(dev_get_drvdata(dev)); |
| 52 | } |
| 53 | |
| 54 | /** |
| 55 | * struct ufs_hba_dwc_vops - UFS DWC specific variant operations |
| 56 | */ |
| 57 | static struct ufs_hba_variant_ops tc_dwc_g210_pci_hba_vops = { |
| 58 | .name = "tc-dwc-g210-pci", |
| 59 | .link_startup_notify = ufshcd_dwc_link_startup_notify, |
| 60 | }; |
| 61 | |
| 62 | /** |
| 63 | * tc_dwc_g210_pci_shutdown - main function to put the controller in reset state |
| 64 | * @pdev: pointer to PCI device handle |
| 65 | */ |
| 66 | static void tc_dwc_g210_pci_shutdown(struct pci_dev *pdev) |
| 67 | { |
| 68 | ufshcd_shutdown((struct ufs_hba *)pci_get_drvdata(pdev)); |
| 69 | } |
| 70 | |
| 71 | /** |
| 72 | * tc_dwc_g210_pci_remove - de-allocate PCI/SCSI host and host memory space |
| 73 | * data structure memory |
| 74 | * @pdev - pointer to PCI handle |
| 75 | */ |
| 76 | static void tc_dwc_g210_pci_remove(struct pci_dev *pdev) |
| 77 | { |
| 78 | struct ufs_hba *hba = pci_get_drvdata(pdev); |
| 79 | |
| 80 | pm_runtime_forbid(&pdev->dev); |
| 81 | pm_runtime_get_noresume(&pdev->dev); |
| 82 | ufshcd_remove(hba); |
| 83 | } |
| 84 | |
| 85 | /** |
| 86 | * tc_dwc_g210_pci_probe - probe routine of the driver |
| 87 | * @pdev: pointer to PCI device handle |
| 88 | * @id: PCI device id |
| 89 | * |
| 90 | * Returns 0 on success, non-zero value on failure |
| 91 | */ |
| 92 | static int |
| 93 | tc_dwc_g210_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| 94 | { |
| 95 | struct ufs_hba *hba; |
| 96 | void __iomem *mmio_base; |
| 97 | int err; |
| 98 | |
| 99 | /* Check Test Chip type and set the specific setup routine */ |
| 100 | if (tc_type == TC_G210_20BIT) { |
| 101 | tc_dwc_g210_pci_hba_vops.phy_initialization = |
| 102 | tc_dwc_g210_config_20_bit; |
| 103 | } else if (tc_type == TC_G210_40BIT) { |
| 104 | tc_dwc_g210_pci_hba_vops.phy_initialization = |
| 105 | tc_dwc_g210_config_40_bit; |
| 106 | } else { |
| 107 | dev_err(&pdev->dev, "test chip version not specified\n"); |
| 108 | return -EPERM; |
| 109 | } |
| 110 | |
| 111 | err = pcim_enable_device(pdev); |
| 112 | if (err) { |
| 113 | dev_err(&pdev->dev, "pcim_enable_device failed\n"); |
| 114 | return err; |
| 115 | } |
| 116 | |
| 117 | pci_set_master(pdev); |
| 118 | |
| 119 | err = pcim_iomap_regions(pdev, 1 << 0, UFSHCD); |
| 120 | if (err < 0) { |
| 121 | dev_err(&pdev->dev, "request and iomap failed\n"); |
| 122 | return err; |
| 123 | } |
| 124 | |
| 125 | mmio_base = pcim_iomap_table(pdev)[0]; |
| 126 | |
| 127 | err = ufshcd_alloc_host(&pdev->dev, &hba); |
| 128 | if (err) { |
| 129 | dev_err(&pdev->dev, "Allocation failed\n"); |
| 130 | return err; |
| 131 | } |
| 132 | |
| 133 | hba->vops = &tc_dwc_g210_pci_hba_vops; |
| 134 | |
| 135 | err = ufshcd_init(hba, mmio_base, pdev->irq); |
| 136 | if (err) { |
| 137 | dev_err(&pdev->dev, "Initialization failed\n"); |
| 138 | return err; |
| 139 | } |
| 140 | |
| 141 | pci_set_drvdata(pdev, hba); |
| 142 | pm_runtime_put_noidle(&pdev->dev); |
| 143 | pm_runtime_allow(&pdev->dev); |
| 144 | |
| 145 | return 0; |
| 146 | } |
| 147 | |
| 148 | static const struct dev_pm_ops tc_dwc_g210_pci_pm_ops = { |
| 149 | .suspend = tc_dwc_g210_pci_suspend, |
| 150 | .resume = tc_dwc_g210_pci_resume, |
| 151 | .runtime_suspend = tc_dwc_g210_pci_runtime_suspend, |
| 152 | .runtime_resume = tc_dwc_g210_pci_runtime_resume, |
| 153 | .runtime_idle = tc_dwc_g210_pci_runtime_idle, |
| 154 | }; |
| 155 | |
| 156 | static const struct pci_device_id tc_dwc_g210_pci_tbl[] = { |
| 157 | { PCI_VENDOR_ID_SYNOPSYS, 0xB101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| 158 | { PCI_VENDOR_ID_SYNOPSYS, 0xB102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| 159 | { } /* terminate list */ |
| 160 | }; |
| 161 | |
| 162 | MODULE_DEVICE_TABLE(pci, tc_dwc_g210_pci_tbl); |
| 163 | |
| 164 | static struct pci_driver tc_dwc_g210_pci_driver = { |
| 165 | .name = "tc-dwc-g210-pci", |
| 166 | .id_table = tc_dwc_g210_pci_tbl, |
| 167 | .probe = tc_dwc_g210_pci_probe, |
| 168 | .remove = tc_dwc_g210_pci_remove, |
| 169 | .shutdown = tc_dwc_g210_pci_shutdown, |
| 170 | .driver = { |
| 171 | .pm = &tc_dwc_g210_pci_pm_ops |
| 172 | }, |
| 173 | }; |
| 174 | |
| 175 | module_pci_driver(tc_dwc_g210_pci_driver); |
| 176 | |
| 177 | MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>"); |
| 178 | MODULE_DESCRIPTION("Synopsys Test Chip G210 PCI glue driver"); |
| 179 | MODULE_LICENSE("Dual BSD/GPL"); |