rjw | 1f88458 | 2022-01-06 17:20:42 +0800 | [diff] [blame^] | 1 | /* |
| 2 | * CLPS711X SPI bus driver |
| 3 | * |
| 4 | * Copyright (C) 2012-2016 Alexander Shiyan <shc_work@mail.ru> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; either version 2 of the License, or |
| 9 | * (at your option) any later version. |
| 10 | */ |
| 11 | |
| 12 | #include <linux/io.h> |
| 13 | #include <linux/clk.h> |
| 14 | #include <linux/gpio.h> |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/interrupt.h> |
| 17 | #include <linux/platform_device.h> |
| 18 | #include <linux/regmap.h> |
| 19 | #include <linux/mfd/syscon.h> |
| 20 | #include <linux/mfd/syscon/clps711x.h> |
| 21 | #include <linux/spi/spi.h> |
| 22 | |
| 23 | #define DRIVER_NAME "clps711x-spi" |
| 24 | |
| 25 | #define SYNCIO_FRMLEN(x) ((x) << 8) |
| 26 | #define SYNCIO_TXFRMEN (1 << 14) |
| 27 | |
| 28 | struct spi_clps711x_data { |
| 29 | void __iomem *syncio; |
| 30 | struct regmap *syscon; |
| 31 | struct clk *spi_clk; |
| 32 | |
| 33 | u8 *tx_buf; |
| 34 | u8 *rx_buf; |
| 35 | unsigned int bpw; |
| 36 | int len; |
| 37 | }; |
| 38 | |
| 39 | static int spi_clps711x_setup(struct spi_device *spi) |
| 40 | { |
| 41 | if (!spi->controller_state) { |
| 42 | int ret; |
| 43 | |
| 44 | ret = devm_gpio_request(&spi->master->dev, spi->cs_gpio, |
| 45 | dev_name(&spi->master->dev)); |
| 46 | if (ret) |
| 47 | return ret; |
| 48 | |
| 49 | spi->controller_state = spi; |
| 50 | } |
| 51 | |
| 52 | /* We are expect that SPI-device is not selected */ |
| 53 | gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); |
| 54 | |
| 55 | return 0; |
| 56 | } |
| 57 | |
| 58 | static int spi_clps711x_prepare_message(struct spi_master *master, |
| 59 | struct spi_message *msg) |
| 60 | { |
| 61 | struct spi_clps711x_data *hw = spi_master_get_devdata(master); |
| 62 | struct spi_device *spi = msg->spi; |
| 63 | |
| 64 | /* Setup mode for transfer */ |
| 65 | return regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCKNSEN, |
| 66 | (spi->mode & SPI_CPHA) ? |
| 67 | SYSCON3_ADCCKNSEN : 0); |
| 68 | } |
| 69 | |
| 70 | static int spi_clps711x_transfer_one(struct spi_master *master, |
| 71 | struct spi_device *spi, |
| 72 | struct spi_transfer *xfer) |
| 73 | { |
| 74 | struct spi_clps711x_data *hw = spi_master_get_devdata(master); |
| 75 | u8 data; |
| 76 | |
| 77 | clk_set_rate(hw->spi_clk, xfer->speed_hz ? : spi->max_speed_hz); |
| 78 | |
| 79 | hw->len = xfer->len; |
| 80 | hw->bpw = xfer->bits_per_word; |
| 81 | hw->tx_buf = (u8 *)xfer->tx_buf; |
| 82 | hw->rx_buf = (u8 *)xfer->rx_buf; |
| 83 | |
| 84 | /* Initiate transfer */ |
| 85 | data = hw->tx_buf ? *hw->tx_buf++ : 0; |
| 86 | writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN, hw->syncio); |
| 87 | |
| 88 | return 1; |
| 89 | } |
| 90 | |
| 91 | static irqreturn_t spi_clps711x_isr(int irq, void *dev_id) |
| 92 | { |
| 93 | struct spi_master *master = dev_id; |
| 94 | struct spi_clps711x_data *hw = spi_master_get_devdata(master); |
| 95 | u8 data; |
| 96 | |
| 97 | /* Handle RX */ |
| 98 | data = readb(hw->syncio); |
| 99 | if (hw->rx_buf) |
| 100 | *hw->rx_buf++ = data; |
| 101 | |
| 102 | /* Handle TX */ |
| 103 | if (--hw->len > 0) { |
| 104 | data = hw->tx_buf ? *hw->tx_buf++ : 0; |
| 105 | writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN, |
| 106 | hw->syncio); |
| 107 | } else |
| 108 | spi_finalize_current_transfer(master); |
| 109 | |
| 110 | return IRQ_HANDLED; |
| 111 | } |
| 112 | |
| 113 | static int spi_clps711x_probe(struct platform_device *pdev) |
| 114 | { |
| 115 | struct spi_clps711x_data *hw; |
| 116 | struct spi_master *master; |
| 117 | struct resource *res; |
| 118 | int irq, ret; |
| 119 | |
| 120 | irq = platform_get_irq(pdev, 0); |
| 121 | if (irq < 0) |
| 122 | return irq; |
| 123 | |
| 124 | master = spi_alloc_master(&pdev->dev, sizeof(*hw)); |
| 125 | if (!master) |
| 126 | return -ENOMEM; |
| 127 | |
| 128 | master->bus_num = -1; |
| 129 | master->mode_bits = SPI_CPHA | SPI_CS_HIGH; |
| 130 | master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 8); |
| 131 | master->dev.of_node = pdev->dev.of_node; |
| 132 | master->setup = spi_clps711x_setup; |
| 133 | master->prepare_message = spi_clps711x_prepare_message; |
| 134 | master->transfer_one = spi_clps711x_transfer_one; |
| 135 | |
| 136 | hw = spi_master_get_devdata(master); |
| 137 | |
| 138 | hw->spi_clk = devm_clk_get(&pdev->dev, NULL); |
| 139 | if (IS_ERR(hw->spi_clk)) { |
| 140 | ret = PTR_ERR(hw->spi_clk); |
| 141 | goto err_out; |
| 142 | } |
| 143 | |
| 144 | hw->syscon = |
| 145 | syscon_regmap_lookup_by_compatible("cirrus,ep7209-syscon3"); |
| 146 | if (IS_ERR(hw->syscon)) { |
| 147 | ret = PTR_ERR(hw->syscon); |
| 148 | goto err_out; |
| 149 | } |
| 150 | |
| 151 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 152 | hw->syncio = devm_ioremap_resource(&pdev->dev, res); |
| 153 | if (IS_ERR(hw->syncio)) { |
| 154 | ret = PTR_ERR(hw->syncio); |
| 155 | goto err_out; |
| 156 | } |
| 157 | |
| 158 | /* Disable extended mode due hardware problems */ |
| 159 | regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCON, 0); |
| 160 | |
| 161 | /* Clear possible pending interrupt */ |
| 162 | readl(hw->syncio); |
| 163 | |
| 164 | ret = devm_request_irq(&pdev->dev, irq, spi_clps711x_isr, 0, |
| 165 | dev_name(&pdev->dev), master); |
| 166 | if (ret) |
| 167 | goto err_out; |
| 168 | |
| 169 | ret = devm_spi_register_master(&pdev->dev, master); |
| 170 | if (!ret) |
| 171 | return 0; |
| 172 | |
| 173 | err_out: |
| 174 | spi_master_put(master); |
| 175 | |
| 176 | return ret; |
| 177 | } |
| 178 | |
| 179 | static const struct of_device_id clps711x_spi_dt_ids[] = { |
| 180 | { .compatible = "cirrus,ep7209-spi", }, |
| 181 | { } |
| 182 | }; |
| 183 | MODULE_DEVICE_TABLE(of, clps711x_spi_dt_ids); |
| 184 | |
| 185 | static struct platform_driver clps711x_spi_driver = { |
| 186 | .driver = { |
| 187 | .name = DRIVER_NAME, |
| 188 | .of_match_table = clps711x_spi_dt_ids, |
| 189 | }, |
| 190 | .probe = spi_clps711x_probe, |
| 191 | }; |
| 192 | module_platform_driver(clps711x_spi_driver); |
| 193 | |
| 194 | MODULE_LICENSE("GPL"); |
| 195 | MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); |
| 196 | MODULE_DESCRIPTION("CLPS711X SPI bus driver"); |
| 197 | MODULE_ALIAS("platform:" DRIVER_NAME); |