rjw | 1f88458 | 2022-01-06 17:20:42 +0800 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Glue code for the ISP1760 driver and bus |
| 4 | * Currently there is support for |
| 5 | * - OpenFirmware |
| 6 | * - PCI |
| 7 | * - PDEV (generic platform device centralized driver model) |
| 8 | * |
| 9 | * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de> |
| 10 | * |
| 11 | */ |
| 12 | |
| 13 | #include <linux/usb.h> |
| 14 | #include <linux/io.h> |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/of.h> |
| 17 | #include <linux/platform_device.h> |
| 18 | #include <linux/slab.h> |
| 19 | #include <linux/usb/isp1760.h> |
| 20 | #include <linux/usb/hcd.h> |
| 21 | |
| 22 | #include "isp1760-core.h" |
| 23 | #include "isp1760-regs.h" |
| 24 | |
| 25 | #ifdef CONFIG_USB_PCI |
| 26 | #include <linux/pci.h> |
| 27 | #endif |
| 28 | |
| 29 | #ifdef CONFIG_USB_PCI |
| 30 | static int isp1761_pci_init(struct pci_dev *dev) |
| 31 | { |
| 32 | resource_size_t mem_start; |
| 33 | resource_size_t mem_length; |
| 34 | u8 __iomem *iobase; |
| 35 | u8 latency, limit; |
| 36 | int retry_count; |
| 37 | u32 reg_data; |
| 38 | |
| 39 | /* Grab the PLX PCI shared memory of the ISP 1761 we need */ |
| 40 | mem_start = pci_resource_start(dev, 3); |
| 41 | mem_length = pci_resource_len(dev, 3); |
| 42 | if (mem_length < 0xffff) { |
| 43 | printk(KERN_ERR "memory length for this resource is wrong\n"); |
| 44 | return -ENOMEM; |
| 45 | } |
| 46 | |
| 47 | if (!request_mem_region(mem_start, mem_length, "ISP-PCI")) { |
| 48 | printk(KERN_ERR "host controller already in use\n"); |
| 49 | return -EBUSY; |
| 50 | } |
| 51 | |
| 52 | /* map available memory */ |
| 53 | iobase = ioremap_nocache(mem_start, mem_length); |
| 54 | if (!iobase) { |
| 55 | printk(KERN_ERR "Error ioremap failed\n"); |
| 56 | release_mem_region(mem_start, mem_length); |
| 57 | return -ENOMEM; |
| 58 | } |
| 59 | |
| 60 | /* bad pci latencies can contribute to overruns */ |
| 61 | pci_read_config_byte(dev, PCI_LATENCY_TIMER, &latency); |
| 62 | if (latency) { |
| 63 | pci_read_config_byte(dev, PCI_MAX_LAT, &limit); |
| 64 | if (limit && limit < latency) |
| 65 | pci_write_config_byte(dev, PCI_LATENCY_TIMER, limit); |
| 66 | } |
| 67 | |
| 68 | /* Try to check whether we can access Scratch Register of |
| 69 | * Host Controller or not. The initial PCI access is retried until |
| 70 | * local init for the PCI bridge is completed |
| 71 | */ |
| 72 | retry_count = 20; |
| 73 | reg_data = 0; |
| 74 | while ((reg_data != 0xFACE) && retry_count) { |
| 75 | /*by default host is in 16bit mode, so |
| 76 | * io operations at this stage must be 16 bit |
| 77 | * */ |
| 78 | writel(0xface, iobase + HC_SCRATCH_REG); |
| 79 | udelay(100); |
| 80 | reg_data = readl(iobase + HC_SCRATCH_REG) & 0x0000ffff; |
| 81 | retry_count--; |
| 82 | } |
| 83 | |
| 84 | iounmap(iobase); |
| 85 | release_mem_region(mem_start, mem_length); |
| 86 | |
| 87 | /* Host Controller presence is detected by writing to scratch register |
| 88 | * and reading back and checking the contents are same or not |
| 89 | */ |
| 90 | if (reg_data != 0xFACE) { |
| 91 | dev_err(&dev->dev, "scratch register mismatch %x\n", reg_data); |
| 92 | return -ENOMEM; |
| 93 | } |
| 94 | |
| 95 | /* Grab the PLX PCI mem maped port start address we need */ |
| 96 | mem_start = pci_resource_start(dev, 0); |
| 97 | mem_length = pci_resource_len(dev, 0); |
| 98 | |
| 99 | if (!request_mem_region(mem_start, mem_length, "ISP1761 IO MEM")) { |
| 100 | printk(KERN_ERR "request region #1\n"); |
| 101 | return -EBUSY; |
| 102 | } |
| 103 | |
| 104 | iobase = ioremap_nocache(mem_start, mem_length); |
| 105 | if (!iobase) { |
| 106 | printk(KERN_ERR "ioremap #1\n"); |
| 107 | release_mem_region(mem_start, mem_length); |
| 108 | return -ENOMEM; |
| 109 | } |
| 110 | |
| 111 | /* configure PLX PCI chip to pass interrupts */ |
| 112 | #define PLX_INT_CSR_REG 0x68 |
| 113 | reg_data = readl(iobase + PLX_INT_CSR_REG); |
| 114 | reg_data |= 0x900; |
| 115 | writel(reg_data, iobase + PLX_INT_CSR_REG); |
| 116 | |
| 117 | /* done with PLX IO access */ |
| 118 | iounmap(iobase); |
| 119 | release_mem_region(mem_start, mem_length); |
| 120 | |
| 121 | return 0; |
| 122 | } |
| 123 | |
| 124 | static int isp1761_pci_probe(struct pci_dev *dev, |
| 125 | const struct pci_device_id *id) |
| 126 | { |
| 127 | unsigned int devflags = 0; |
| 128 | int ret; |
| 129 | |
| 130 | if (!dev->irq) |
| 131 | return -ENODEV; |
| 132 | |
| 133 | if (pci_enable_device(dev) < 0) |
| 134 | return -ENODEV; |
| 135 | |
| 136 | ret = isp1761_pci_init(dev); |
| 137 | if (ret < 0) |
| 138 | goto error; |
| 139 | |
| 140 | pci_set_master(dev); |
| 141 | |
| 142 | dev->dev.dma_mask = NULL; |
| 143 | ret = isp1760_register(&dev->resource[3], dev->irq, 0, &dev->dev, |
| 144 | devflags); |
| 145 | if (ret < 0) |
| 146 | goto error; |
| 147 | |
| 148 | return 0; |
| 149 | |
| 150 | error: |
| 151 | pci_disable_device(dev); |
| 152 | return ret; |
| 153 | } |
| 154 | |
| 155 | static void isp1761_pci_remove(struct pci_dev *dev) |
| 156 | { |
| 157 | isp1760_unregister(&dev->dev); |
| 158 | |
| 159 | pci_disable_device(dev); |
| 160 | } |
| 161 | |
| 162 | static void isp1761_pci_shutdown(struct pci_dev *dev) |
| 163 | { |
| 164 | printk(KERN_ERR "ips1761_pci_shutdown\n"); |
| 165 | } |
| 166 | |
| 167 | static const struct pci_device_id isp1760_plx[] = { |
| 168 | { |
| 169 | .class = PCI_CLASS_BRIDGE_OTHER << 8, |
| 170 | .class_mask = ~0, |
| 171 | .vendor = PCI_VENDOR_ID_PLX, |
| 172 | .device = 0x5406, |
| 173 | .subvendor = PCI_VENDOR_ID_PLX, |
| 174 | .subdevice = 0x9054, |
| 175 | }, |
| 176 | { } |
| 177 | }; |
| 178 | MODULE_DEVICE_TABLE(pci, isp1760_plx); |
| 179 | |
| 180 | static struct pci_driver isp1761_pci_driver = { |
| 181 | .name = "isp1760", |
| 182 | .id_table = isp1760_plx, |
| 183 | .probe = isp1761_pci_probe, |
| 184 | .remove = isp1761_pci_remove, |
| 185 | .shutdown = isp1761_pci_shutdown, |
| 186 | }; |
| 187 | #endif |
| 188 | |
| 189 | static int isp1760_plat_probe(struct platform_device *pdev) |
| 190 | { |
| 191 | unsigned long irqflags; |
| 192 | unsigned int devflags = 0; |
| 193 | struct resource *mem_res; |
| 194 | struct resource *irq_res; |
| 195 | int ret; |
| 196 | |
| 197 | mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 198 | |
| 199 | irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| 200 | if (!irq_res) { |
| 201 | pr_warn("isp1760: IRQ resource not available\n"); |
| 202 | return -ENODEV; |
| 203 | } |
| 204 | irqflags = irq_res->flags & IRQF_TRIGGER_MASK; |
| 205 | |
| 206 | if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) { |
| 207 | struct device_node *dp = pdev->dev.of_node; |
| 208 | u32 bus_width = 0; |
| 209 | |
| 210 | if (of_device_is_compatible(dp, "nxp,usb-isp1761")) |
| 211 | devflags |= ISP1760_FLAG_ISP1761; |
| 212 | |
| 213 | /* Some systems wire up only 16 of the 32 data lines */ |
| 214 | of_property_read_u32(dp, "bus-width", &bus_width); |
| 215 | if (bus_width == 16) |
| 216 | devflags |= ISP1760_FLAG_BUS_WIDTH_16; |
| 217 | |
| 218 | if (of_property_read_bool(dp, "port1-otg")) |
| 219 | devflags |= ISP1760_FLAG_OTG_EN; |
| 220 | |
| 221 | if (of_property_read_bool(dp, "analog-oc")) |
| 222 | devflags |= ISP1760_FLAG_ANALOG_OC; |
| 223 | |
| 224 | if (of_property_read_bool(dp, "dack-polarity")) |
| 225 | devflags |= ISP1760_FLAG_DACK_POL_HIGH; |
| 226 | |
| 227 | if (of_property_read_bool(dp, "dreq-polarity")) |
| 228 | devflags |= ISP1760_FLAG_DREQ_POL_HIGH; |
| 229 | } else if (dev_get_platdata(&pdev->dev)) { |
| 230 | struct isp1760_platform_data *pdata = |
| 231 | dev_get_platdata(&pdev->dev); |
| 232 | |
| 233 | if (pdata->is_isp1761) |
| 234 | devflags |= ISP1760_FLAG_ISP1761; |
| 235 | if (pdata->bus_width_16) |
| 236 | devflags |= ISP1760_FLAG_BUS_WIDTH_16; |
| 237 | if (pdata->port1_otg) |
| 238 | devflags |= ISP1760_FLAG_OTG_EN; |
| 239 | if (pdata->analog_oc) |
| 240 | devflags |= ISP1760_FLAG_ANALOG_OC; |
| 241 | if (pdata->dack_polarity_high) |
| 242 | devflags |= ISP1760_FLAG_DACK_POL_HIGH; |
| 243 | if (pdata->dreq_polarity_high) |
| 244 | devflags |= ISP1760_FLAG_DREQ_POL_HIGH; |
| 245 | } |
| 246 | |
| 247 | ret = isp1760_register(mem_res, irq_res->start, irqflags, &pdev->dev, |
| 248 | devflags); |
| 249 | if (ret < 0) |
| 250 | return ret; |
| 251 | |
| 252 | pr_info("ISP1760 USB device initialised\n"); |
| 253 | return 0; |
| 254 | } |
| 255 | |
| 256 | static int isp1760_plat_remove(struct platform_device *pdev) |
| 257 | { |
| 258 | isp1760_unregister(&pdev->dev); |
| 259 | |
| 260 | return 0; |
| 261 | } |
| 262 | |
| 263 | #ifdef CONFIG_OF |
| 264 | static const struct of_device_id isp1760_of_match[] = { |
| 265 | { .compatible = "nxp,usb-isp1760", }, |
| 266 | { .compatible = "nxp,usb-isp1761", }, |
| 267 | { }, |
| 268 | }; |
| 269 | MODULE_DEVICE_TABLE(of, isp1760_of_match); |
| 270 | #endif |
| 271 | |
| 272 | static struct platform_driver isp1760_plat_driver = { |
| 273 | .probe = isp1760_plat_probe, |
| 274 | .remove = isp1760_plat_remove, |
| 275 | .driver = { |
| 276 | .name = "isp1760", |
| 277 | .of_match_table = of_match_ptr(isp1760_of_match), |
| 278 | }, |
| 279 | }; |
| 280 | |
| 281 | static int __init isp1760_init(void) |
| 282 | { |
| 283 | int ret, any_ret = -ENODEV; |
| 284 | |
| 285 | isp1760_init_kmem_once(); |
| 286 | |
| 287 | ret = platform_driver_register(&isp1760_plat_driver); |
| 288 | if (!ret) |
| 289 | any_ret = 0; |
| 290 | #ifdef CONFIG_USB_PCI |
| 291 | ret = pci_register_driver(&isp1761_pci_driver); |
| 292 | if (!ret) |
| 293 | any_ret = 0; |
| 294 | #endif |
| 295 | |
| 296 | if (any_ret) |
| 297 | isp1760_deinit_kmem_cache(); |
| 298 | return any_ret; |
| 299 | } |
| 300 | module_init(isp1760_init); |
| 301 | |
| 302 | static void __exit isp1760_exit(void) |
| 303 | { |
| 304 | platform_driver_unregister(&isp1760_plat_driver); |
| 305 | #ifdef CONFIG_USB_PCI |
| 306 | pci_unregister_driver(&isp1761_pci_driver); |
| 307 | #endif |
| 308 | isp1760_deinit_kmem_cache(); |
| 309 | } |
| 310 | module_exit(isp1760_exit); |