rjw | 1f88458 | 2022-01-06 17:20:42 +0800 | [diff] [blame^] | 1 | /* |
| 2 | * Apple Cinema Display driver |
| 3 | * |
| 4 | * Copyright (C) 2006 Michael Hanselmann (linux-kernel@hansmi.ch) |
| 5 | * |
| 6 | * Thanks to Caskey L. Dickson for his work with acdctl. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License as published by |
| 10 | * the Free Software Foundation; either version 2 of the License, or |
| 11 | * (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| 21 | */ |
| 22 | |
| 23 | #include <linux/kernel.h> |
| 24 | #include <linux/errno.h> |
| 25 | #include <linux/init.h> |
| 26 | #include <linux/module.h> |
| 27 | #include <linux/slab.h> |
| 28 | #include <linux/usb.h> |
| 29 | #include <linux/backlight.h> |
| 30 | #include <linux/timer.h> |
| 31 | #include <linux/workqueue.h> |
| 32 | #include <linux/atomic.h> |
| 33 | |
| 34 | #define APPLE_VENDOR_ID 0x05AC |
| 35 | |
| 36 | #define USB_REQ_GET_REPORT 0x01 |
| 37 | #define USB_REQ_SET_REPORT 0x09 |
| 38 | |
| 39 | #define ACD_USB_TIMEOUT 250 |
| 40 | |
| 41 | #define ACD_USB_EDID 0x0302 |
| 42 | #define ACD_USB_BRIGHTNESS 0x0310 |
| 43 | |
| 44 | #define ACD_BTN_NONE 0 |
| 45 | #define ACD_BTN_BRIGHT_UP 3 |
| 46 | #define ACD_BTN_BRIGHT_DOWN 4 |
| 47 | |
| 48 | #define ACD_URB_BUFFER_LEN 2 |
| 49 | #define ACD_MSG_BUFFER_LEN 2 |
| 50 | |
| 51 | #define APPLEDISPLAY_DEVICE(prod) \ |
| 52 | .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ |
| 53 | USB_DEVICE_ID_MATCH_INT_CLASS | \ |
| 54 | USB_DEVICE_ID_MATCH_INT_PROTOCOL, \ |
| 55 | .idVendor = APPLE_VENDOR_ID, \ |
| 56 | .idProduct = (prod), \ |
| 57 | .bInterfaceClass = USB_CLASS_HID, \ |
| 58 | .bInterfaceProtocol = 0x00 |
| 59 | |
| 60 | /* table of devices that work with this driver */ |
| 61 | static const struct usb_device_id appledisplay_table[] = { |
| 62 | { APPLEDISPLAY_DEVICE(0x9218) }, |
| 63 | { APPLEDISPLAY_DEVICE(0x9219) }, |
| 64 | { APPLEDISPLAY_DEVICE(0x921c) }, |
| 65 | { APPLEDISPLAY_DEVICE(0x921d) }, |
| 66 | { APPLEDISPLAY_DEVICE(0x9222) }, |
| 67 | { APPLEDISPLAY_DEVICE(0x9226) }, |
| 68 | { APPLEDISPLAY_DEVICE(0x9236) }, |
| 69 | |
| 70 | /* Terminating entry */ |
| 71 | { } |
| 72 | }; |
| 73 | MODULE_DEVICE_TABLE(usb, appledisplay_table); |
| 74 | |
| 75 | /* Structure to hold all of our device specific stuff */ |
| 76 | struct appledisplay { |
| 77 | struct usb_device *udev; /* usb device */ |
| 78 | struct urb *urb; /* usb request block */ |
| 79 | struct backlight_device *bd; /* backlight device */ |
| 80 | u8 *urbdata; /* interrupt URB data buffer */ |
| 81 | u8 *msgdata; /* control message data buffer */ |
| 82 | |
| 83 | struct delayed_work work; |
| 84 | int button_pressed; |
| 85 | spinlock_t lock; |
| 86 | struct mutex sysfslock; /* concurrent read and write */ |
| 87 | }; |
| 88 | |
| 89 | static atomic_t count_displays = ATOMIC_INIT(0); |
| 90 | |
| 91 | static void appledisplay_complete(struct urb *urb) |
| 92 | { |
| 93 | struct appledisplay *pdata = urb->context; |
| 94 | struct device *dev = &pdata->udev->dev; |
| 95 | unsigned long flags; |
| 96 | int status = urb->status; |
| 97 | int retval; |
| 98 | |
| 99 | switch (status) { |
| 100 | case 0: |
| 101 | /* success */ |
| 102 | break; |
| 103 | case -EOVERFLOW: |
| 104 | dev_err(dev, |
| 105 | "OVERFLOW with data length %d, actual length is %d\n", |
| 106 | ACD_URB_BUFFER_LEN, pdata->urb->actual_length); |
| 107 | case -ECONNRESET: |
| 108 | case -ENOENT: |
| 109 | case -ESHUTDOWN: |
| 110 | /* This urb is terminated, clean up */ |
| 111 | dev_dbg(dev, "%s - urb shuttingdown with status: %d\n", |
| 112 | __func__, status); |
| 113 | return; |
| 114 | default: |
| 115 | dev_dbg(dev, "%s - nonzero urb status received: %d\n", |
| 116 | __func__, status); |
| 117 | goto exit; |
| 118 | } |
| 119 | |
| 120 | spin_lock_irqsave(&pdata->lock, flags); |
| 121 | |
| 122 | switch(pdata->urbdata[1]) { |
| 123 | case ACD_BTN_BRIGHT_UP: |
| 124 | case ACD_BTN_BRIGHT_DOWN: |
| 125 | pdata->button_pressed = 1; |
| 126 | schedule_delayed_work(&pdata->work, 0); |
| 127 | break; |
| 128 | case ACD_BTN_NONE: |
| 129 | default: |
| 130 | pdata->button_pressed = 0; |
| 131 | break; |
| 132 | } |
| 133 | |
| 134 | spin_unlock_irqrestore(&pdata->lock, flags); |
| 135 | |
| 136 | exit: |
| 137 | retval = usb_submit_urb(pdata->urb, GFP_ATOMIC); |
| 138 | if (retval) { |
| 139 | dev_err(dev, "%s - usb_submit_urb failed with result %d\n", |
| 140 | __func__, retval); |
| 141 | } |
| 142 | } |
| 143 | |
| 144 | static int appledisplay_bl_update_status(struct backlight_device *bd) |
| 145 | { |
| 146 | struct appledisplay *pdata = bl_get_data(bd); |
| 147 | int retval; |
| 148 | |
| 149 | mutex_lock(&pdata->sysfslock); |
| 150 | pdata->msgdata[0] = 0x10; |
| 151 | pdata->msgdata[1] = bd->props.brightness; |
| 152 | |
| 153 | retval = usb_control_msg( |
| 154 | pdata->udev, |
| 155 | usb_sndctrlpipe(pdata->udev, 0), |
| 156 | USB_REQ_SET_REPORT, |
| 157 | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 158 | ACD_USB_BRIGHTNESS, |
| 159 | 0, |
| 160 | pdata->msgdata, 2, |
| 161 | ACD_USB_TIMEOUT); |
| 162 | mutex_unlock(&pdata->sysfslock); |
| 163 | |
| 164 | if (retval < 0) |
| 165 | return retval; |
| 166 | else |
| 167 | return 0; |
| 168 | } |
| 169 | |
| 170 | static int appledisplay_bl_get_brightness(struct backlight_device *bd) |
| 171 | { |
| 172 | struct appledisplay *pdata = bl_get_data(bd); |
| 173 | int retval, brightness; |
| 174 | |
| 175 | mutex_lock(&pdata->sysfslock); |
| 176 | retval = usb_control_msg( |
| 177 | pdata->udev, |
| 178 | usb_rcvctrlpipe(pdata->udev, 0), |
| 179 | USB_REQ_GET_REPORT, |
| 180 | USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 181 | ACD_USB_BRIGHTNESS, |
| 182 | 0, |
| 183 | pdata->msgdata, 2, |
| 184 | ACD_USB_TIMEOUT); |
| 185 | if (retval < 2) { |
| 186 | if (retval >= 0) |
| 187 | retval = -EMSGSIZE; |
| 188 | } else { |
| 189 | brightness = pdata->msgdata[1]; |
| 190 | } |
| 191 | mutex_unlock(&pdata->sysfslock); |
| 192 | |
| 193 | if (retval < 0) |
| 194 | return retval; |
| 195 | else |
| 196 | return brightness; |
| 197 | } |
| 198 | |
| 199 | static const struct backlight_ops appledisplay_bl_data = { |
| 200 | .get_brightness = appledisplay_bl_get_brightness, |
| 201 | .update_status = appledisplay_bl_update_status, |
| 202 | }; |
| 203 | |
| 204 | static void appledisplay_work(struct work_struct *work) |
| 205 | { |
| 206 | struct appledisplay *pdata = |
| 207 | container_of(work, struct appledisplay, work.work); |
| 208 | int retval; |
| 209 | |
| 210 | retval = appledisplay_bl_get_brightness(pdata->bd); |
| 211 | if (retval >= 0) |
| 212 | pdata->bd->props.brightness = retval; |
| 213 | |
| 214 | /* Poll again in about 125ms if there's still a button pressed */ |
| 215 | if (pdata->button_pressed) |
| 216 | schedule_delayed_work(&pdata->work, HZ / 8); |
| 217 | } |
| 218 | |
| 219 | static int appledisplay_probe(struct usb_interface *iface, |
| 220 | const struct usb_device_id *id) |
| 221 | { |
| 222 | struct backlight_properties props; |
| 223 | struct appledisplay *pdata; |
| 224 | struct usb_device *udev = interface_to_usbdev(iface); |
| 225 | struct usb_endpoint_descriptor *endpoint; |
| 226 | int int_in_endpointAddr = 0; |
| 227 | int retval, brightness; |
| 228 | char bl_name[20]; |
| 229 | |
| 230 | /* set up the endpoint information */ |
| 231 | /* use only the first interrupt-in endpoint */ |
| 232 | retval = usb_find_int_in_endpoint(iface->cur_altsetting, &endpoint); |
| 233 | if (retval) { |
| 234 | dev_err(&iface->dev, "Could not find int-in endpoint\n"); |
| 235 | return retval; |
| 236 | } |
| 237 | |
| 238 | int_in_endpointAddr = endpoint->bEndpointAddress; |
| 239 | |
| 240 | /* allocate memory for our device state and initialize it */ |
| 241 | pdata = kzalloc(sizeof(struct appledisplay), GFP_KERNEL); |
| 242 | if (!pdata) { |
| 243 | retval = -ENOMEM; |
| 244 | goto error; |
| 245 | } |
| 246 | |
| 247 | pdata->udev = udev; |
| 248 | |
| 249 | spin_lock_init(&pdata->lock); |
| 250 | INIT_DELAYED_WORK(&pdata->work, appledisplay_work); |
| 251 | mutex_init(&pdata->sysfslock); |
| 252 | |
| 253 | /* Allocate buffer for control messages */ |
| 254 | pdata->msgdata = kmalloc(ACD_MSG_BUFFER_LEN, GFP_KERNEL); |
| 255 | if (!pdata->msgdata) { |
| 256 | retval = -ENOMEM; |
| 257 | goto error; |
| 258 | } |
| 259 | |
| 260 | /* Allocate interrupt URB */ |
| 261 | pdata->urb = usb_alloc_urb(0, GFP_KERNEL); |
| 262 | if (!pdata->urb) { |
| 263 | retval = -ENOMEM; |
| 264 | goto error; |
| 265 | } |
| 266 | |
| 267 | /* Allocate buffer for interrupt data */ |
| 268 | pdata->urbdata = usb_alloc_coherent(pdata->udev, ACD_URB_BUFFER_LEN, |
| 269 | GFP_KERNEL, &pdata->urb->transfer_dma); |
| 270 | if (!pdata->urbdata) { |
| 271 | retval = -ENOMEM; |
| 272 | dev_err(&iface->dev, "Allocating URB buffer failed\n"); |
| 273 | goto error; |
| 274 | } |
| 275 | |
| 276 | /* Configure interrupt URB */ |
| 277 | usb_fill_int_urb(pdata->urb, udev, |
| 278 | usb_rcvintpipe(udev, int_in_endpointAddr), |
| 279 | pdata->urbdata, ACD_URB_BUFFER_LEN, appledisplay_complete, |
| 280 | pdata, 1); |
| 281 | if (usb_submit_urb(pdata->urb, GFP_KERNEL)) { |
| 282 | retval = -EIO; |
| 283 | dev_err(&iface->dev, "Submitting URB failed\n"); |
| 284 | goto error; |
| 285 | } |
| 286 | |
| 287 | /* Register backlight device */ |
| 288 | snprintf(bl_name, sizeof(bl_name), "appledisplay%d", |
| 289 | atomic_inc_return(&count_displays) - 1); |
| 290 | memset(&props, 0, sizeof(struct backlight_properties)); |
| 291 | props.type = BACKLIGHT_RAW; |
| 292 | props.max_brightness = 0xff; |
| 293 | pdata->bd = backlight_device_register(bl_name, NULL, pdata, |
| 294 | &appledisplay_bl_data, &props); |
| 295 | if (IS_ERR(pdata->bd)) { |
| 296 | dev_err(&iface->dev, "Backlight registration failed\n"); |
| 297 | retval = PTR_ERR(pdata->bd); |
| 298 | goto error; |
| 299 | } |
| 300 | |
| 301 | /* Try to get brightness */ |
| 302 | brightness = appledisplay_bl_get_brightness(pdata->bd); |
| 303 | |
| 304 | if (brightness < 0) { |
| 305 | retval = brightness; |
| 306 | dev_err(&iface->dev, |
| 307 | "Error while getting initial brightness: %d\n", retval); |
| 308 | goto error; |
| 309 | } |
| 310 | |
| 311 | /* Set brightness in backlight device */ |
| 312 | pdata->bd->props.brightness = brightness; |
| 313 | |
| 314 | /* save our data pointer in the interface device */ |
| 315 | usb_set_intfdata(iface, pdata); |
| 316 | |
| 317 | printk(KERN_INFO "appledisplay: Apple Cinema Display connected\n"); |
| 318 | |
| 319 | return 0; |
| 320 | |
| 321 | error: |
| 322 | if (pdata) { |
| 323 | if (pdata->urb) { |
| 324 | usb_kill_urb(pdata->urb); |
| 325 | cancel_delayed_work_sync(&pdata->work); |
| 326 | if (pdata->urbdata) |
| 327 | usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN, |
| 328 | pdata->urbdata, pdata->urb->transfer_dma); |
| 329 | usb_free_urb(pdata->urb); |
| 330 | } |
| 331 | if (!IS_ERR(pdata->bd)) |
| 332 | backlight_device_unregister(pdata->bd); |
| 333 | kfree(pdata->msgdata); |
| 334 | } |
| 335 | usb_set_intfdata(iface, NULL); |
| 336 | kfree(pdata); |
| 337 | return retval; |
| 338 | } |
| 339 | |
| 340 | static void appledisplay_disconnect(struct usb_interface *iface) |
| 341 | { |
| 342 | struct appledisplay *pdata = usb_get_intfdata(iface); |
| 343 | |
| 344 | if (pdata) { |
| 345 | usb_kill_urb(pdata->urb); |
| 346 | cancel_delayed_work_sync(&pdata->work); |
| 347 | backlight_device_unregister(pdata->bd); |
| 348 | usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN, |
| 349 | pdata->urbdata, pdata->urb->transfer_dma); |
| 350 | usb_free_urb(pdata->urb); |
| 351 | kfree(pdata->msgdata); |
| 352 | kfree(pdata); |
| 353 | } |
| 354 | |
| 355 | printk(KERN_INFO "appledisplay: Apple Cinema Display disconnected\n"); |
| 356 | } |
| 357 | |
| 358 | static struct usb_driver appledisplay_driver = { |
| 359 | .name = "appledisplay", |
| 360 | .probe = appledisplay_probe, |
| 361 | .disconnect = appledisplay_disconnect, |
| 362 | .id_table = appledisplay_table, |
| 363 | }; |
| 364 | |
| 365 | static int __init appledisplay_init(void) |
| 366 | { |
| 367 | return usb_register(&appledisplay_driver); |
| 368 | } |
| 369 | |
| 370 | static void __exit appledisplay_exit(void) |
| 371 | { |
| 372 | usb_deregister(&appledisplay_driver); |
| 373 | } |
| 374 | |
| 375 | MODULE_AUTHOR("Michael Hanselmann"); |
| 376 | MODULE_DESCRIPTION("Apple Cinema Display driver"); |
| 377 | MODULE_LICENSE("GPL"); |
| 378 | |
| 379 | module_init(appledisplay_init); |
| 380 | module_exit(appledisplay_exit); |