rjw | 1f88458 | 2022-01-06 17:20:42 +0800 | [diff] [blame^] | 1 | /* |
| 2 | * drivers/char/watchdog/pnx4008_wdt.c |
| 3 | * |
| 4 | * Watchdog driver for PNX4008 board |
| 5 | * |
| 6 | * Authors: Dmitry Chigirev <source@mvista.com>, |
| 7 | * Vitaly Wool <vitalywool@gmail.com> |
| 8 | * Based on sa1100 driver, |
| 9 | * Copyright (C) 2000 Oleg Drokin <green@crimea.edu> |
| 10 | * |
| 11 | * 2005-2006 (c) MontaVista Software, Inc. |
| 12 | * |
| 13 | * (C) 2012 Wolfram Sang, Pengutronix |
| 14 | * |
| 15 | * This file is licensed under the terms of the GNU General Public License |
| 16 | * version 2. This program is licensed "as is" without any warranty of any |
| 17 | * kind, whether express or implied. |
| 18 | */ |
| 19 | |
| 20 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| 21 | |
| 22 | #include <linux/module.h> |
| 23 | #include <linux/moduleparam.h> |
| 24 | #include <linux/types.h> |
| 25 | #include <linux/kernel.h> |
| 26 | #include <linux/watchdog.h> |
| 27 | #include <linux/platform_device.h> |
| 28 | #include <linux/clk.h> |
| 29 | #include <linux/spinlock.h> |
| 30 | #include <linux/io.h> |
| 31 | #include <linux/slab.h> |
| 32 | #include <linux/err.h> |
| 33 | #include <linux/of.h> |
| 34 | #include <linux/delay.h> |
| 35 | #include <linux/reboot.h> |
| 36 | #include <mach/hardware.h> |
| 37 | |
| 38 | /* WatchDog Timer - Chapter 23 Page 207 */ |
| 39 | |
| 40 | #define DEFAULT_HEARTBEAT 19 |
| 41 | #define MAX_HEARTBEAT 60 |
| 42 | |
| 43 | /* Watchdog timer register set definition */ |
| 44 | #define WDTIM_INT(p) ((p) + 0x0) |
| 45 | #define WDTIM_CTRL(p) ((p) + 0x4) |
| 46 | #define WDTIM_COUNTER(p) ((p) + 0x8) |
| 47 | #define WDTIM_MCTRL(p) ((p) + 0xC) |
| 48 | #define WDTIM_MATCH0(p) ((p) + 0x10) |
| 49 | #define WDTIM_EMR(p) ((p) + 0x14) |
| 50 | #define WDTIM_PULSE(p) ((p) + 0x18) |
| 51 | #define WDTIM_RES(p) ((p) + 0x1C) |
| 52 | |
| 53 | /* WDTIM_INT bit definitions */ |
| 54 | #define MATCH_INT 1 |
| 55 | |
| 56 | /* WDTIM_CTRL bit definitions */ |
| 57 | #define COUNT_ENAB 1 |
| 58 | #define RESET_COUNT (1 << 1) |
| 59 | #define DEBUG_EN (1 << 2) |
| 60 | |
| 61 | /* WDTIM_MCTRL bit definitions */ |
| 62 | #define MR0_INT 1 |
| 63 | #undef RESET_COUNT0 |
| 64 | #define RESET_COUNT0 (1 << 2) |
| 65 | #define STOP_COUNT0 (1 << 2) |
| 66 | #define M_RES1 (1 << 3) |
| 67 | #define M_RES2 (1 << 4) |
| 68 | #define RESFRC1 (1 << 5) |
| 69 | #define RESFRC2 (1 << 6) |
| 70 | |
| 71 | /* WDTIM_EMR bit definitions */ |
| 72 | #define EXT_MATCH0 1 |
| 73 | #define MATCH_OUTPUT_HIGH (2 << 4) /*a MATCH_CTRL setting */ |
| 74 | |
| 75 | /* WDTIM_RES bit definitions */ |
| 76 | #define WDOG_RESET 1 /* read only */ |
| 77 | |
| 78 | #define WDOG_COUNTER_RATE 13000000 /*the counter clock is 13 MHz fixed */ |
| 79 | |
| 80 | static bool nowayout = WATCHDOG_NOWAYOUT; |
| 81 | static unsigned int heartbeat = DEFAULT_HEARTBEAT; |
| 82 | |
| 83 | static DEFINE_SPINLOCK(io_lock); |
| 84 | static void __iomem *wdt_base; |
| 85 | static struct clk *wdt_clk; |
| 86 | |
| 87 | static int pnx4008_wdt_start(struct watchdog_device *wdd) |
| 88 | { |
| 89 | spin_lock(&io_lock); |
| 90 | |
| 91 | /* stop counter, initiate counter reset */ |
| 92 | writel(RESET_COUNT, WDTIM_CTRL(wdt_base)); |
| 93 | /*wait for reset to complete. 100% guarantee event */ |
| 94 | while (readl(WDTIM_COUNTER(wdt_base))) |
| 95 | cpu_relax(); |
| 96 | /* internal and external reset, stop after that */ |
| 97 | writel(M_RES2 | STOP_COUNT0 | RESET_COUNT0, WDTIM_MCTRL(wdt_base)); |
| 98 | /* configure match output */ |
| 99 | writel(MATCH_OUTPUT_HIGH, WDTIM_EMR(wdt_base)); |
| 100 | /* clear interrupt, just in case */ |
| 101 | writel(MATCH_INT, WDTIM_INT(wdt_base)); |
| 102 | /* the longest pulse period 65541/(13*10^6) seconds ~ 5 ms. */ |
| 103 | writel(0xFFFF, WDTIM_PULSE(wdt_base)); |
| 104 | writel(wdd->timeout * WDOG_COUNTER_RATE, WDTIM_MATCH0(wdt_base)); |
| 105 | /*enable counter, stop when debugger active */ |
| 106 | writel(COUNT_ENAB | DEBUG_EN, WDTIM_CTRL(wdt_base)); |
| 107 | |
| 108 | spin_unlock(&io_lock); |
| 109 | return 0; |
| 110 | } |
| 111 | |
| 112 | static int pnx4008_wdt_stop(struct watchdog_device *wdd) |
| 113 | { |
| 114 | spin_lock(&io_lock); |
| 115 | |
| 116 | writel(0, WDTIM_CTRL(wdt_base)); /*stop counter */ |
| 117 | |
| 118 | spin_unlock(&io_lock); |
| 119 | return 0; |
| 120 | } |
| 121 | |
| 122 | static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd, |
| 123 | unsigned int new_timeout) |
| 124 | { |
| 125 | wdd->timeout = new_timeout; |
| 126 | return 0; |
| 127 | } |
| 128 | |
| 129 | static int pnx4008_restart_handler(struct watchdog_device *wdd, |
| 130 | unsigned long mode, void *cmd) |
| 131 | { |
| 132 | const char *boot_cmd = cmd; |
| 133 | |
| 134 | /* |
| 135 | * Verify if a "cmd" passed from the userspace program rebooting |
| 136 | * the system; if available, handle it. |
| 137 | * - For details, see the 'reboot' syscall in kernel/reboot.c |
| 138 | * - If the received "cmd" is not supported, use the default mode. |
| 139 | */ |
| 140 | if (boot_cmd) { |
| 141 | if (boot_cmd[0] == 'h') |
| 142 | mode = REBOOT_HARD; |
| 143 | else if (boot_cmd[0] == 's') |
| 144 | mode = REBOOT_SOFT; |
| 145 | } |
| 146 | |
| 147 | if (mode == REBOOT_SOFT) { |
| 148 | /* Force match output active */ |
| 149 | writel(EXT_MATCH0, WDTIM_EMR(wdt_base)); |
| 150 | /* Internal reset on match output (RESOUT_N not asserted) */ |
| 151 | writel(M_RES1, WDTIM_MCTRL(wdt_base)); |
| 152 | } else { |
| 153 | /* Instant assert of RESETOUT_N with pulse length 1mS */ |
| 154 | writel(13000, WDTIM_PULSE(wdt_base)); |
| 155 | writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base)); |
| 156 | } |
| 157 | |
| 158 | /* Wait for watchdog to reset system */ |
| 159 | mdelay(1000); |
| 160 | |
| 161 | return NOTIFY_DONE; |
| 162 | } |
| 163 | |
| 164 | static const struct watchdog_info pnx4008_wdt_ident = { |
| 165 | .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | |
| 166 | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, |
| 167 | .identity = "PNX4008 Watchdog", |
| 168 | }; |
| 169 | |
| 170 | static const struct watchdog_ops pnx4008_wdt_ops = { |
| 171 | .owner = THIS_MODULE, |
| 172 | .start = pnx4008_wdt_start, |
| 173 | .stop = pnx4008_wdt_stop, |
| 174 | .set_timeout = pnx4008_wdt_set_timeout, |
| 175 | .restart = pnx4008_restart_handler, |
| 176 | }; |
| 177 | |
| 178 | static struct watchdog_device pnx4008_wdd = { |
| 179 | .info = &pnx4008_wdt_ident, |
| 180 | .ops = &pnx4008_wdt_ops, |
| 181 | .timeout = DEFAULT_HEARTBEAT, |
| 182 | .min_timeout = 1, |
| 183 | .max_timeout = MAX_HEARTBEAT, |
| 184 | }; |
| 185 | |
| 186 | static int pnx4008_wdt_probe(struct platform_device *pdev) |
| 187 | { |
| 188 | struct resource *r; |
| 189 | int ret = 0; |
| 190 | |
| 191 | watchdog_init_timeout(&pnx4008_wdd, heartbeat, &pdev->dev); |
| 192 | |
| 193 | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 194 | wdt_base = devm_ioremap_resource(&pdev->dev, r); |
| 195 | if (IS_ERR(wdt_base)) |
| 196 | return PTR_ERR(wdt_base); |
| 197 | |
| 198 | wdt_clk = devm_clk_get(&pdev->dev, NULL); |
| 199 | if (IS_ERR(wdt_clk)) |
| 200 | return PTR_ERR(wdt_clk); |
| 201 | |
| 202 | ret = clk_prepare_enable(wdt_clk); |
| 203 | if (ret) |
| 204 | return ret; |
| 205 | |
| 206 | pnx4008_wdd.bootstatus = (readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ? |
| 207 | WDIOF_CARDRESET : 0; |
| 208 | pnx4008_wdd.parent = &pdev->dev; |
| 209 | watchdog_set_nowayout(&pnx4008_wdd, nowayout); |
| 210 | watchdog_set_restart_priority(&pnx4008_wdd, 128); |
| 211 | |
| 212 | pnx4008_wdt_stop(&pnx4008_wdd); /* disable for now */ |
| 213 | |
| 214 | ret = watchdog_register_device(&pnx4008_wdd); |
| 215 | if (ret < 0) { |
| 216 | dev_err(&pdev->dev, "cannot register watchdog device\n"); |
| 217 | goto disable_clk; |
| 218 | } |
| 219 | |
| 220 | dev_info(&pdev->dev, "heartbeat %d sec\n", pnx4008_wdd.timeout); |
| 221 | |
| 222 | return 0; |
| 223 | |
| 224 | disable_clk: |
| 225 | clk_disable_unprepare(wdt_clk); |
| 226 | return ret; |
| 227 | } |
| 228 | |
| 229 | static int pnx4008_wdt_remove(struct platform_device *pdev) |
| 230 | { |
| 231 | watchdog_unregister_device(&pnx4008_wdd); |
| 232 | |
| 233 | clk_disable_unprepare(wdt_clk); |
| 234 | |
| 235 | return 0; |
| 236 | } |
| 237 | |
| 238 | #ifdef CONFIG_OF |
| 239 | static const struct of_device_id pnx4008_wdt_match[] = { |
| 240 | { .compatible = "nxp,pnx4008-wdt" }, |
| 241 | { } |
| 242 | }; |
| 243 | MODULE_DEVICE_TABLE(of, pnx4008_wdt_match); |
| 244 | #endif |
| 245 | |
| 246 | static struct platform_driver platform_wdt_driver = { |
| 247 | .driver = { |
| 248 | .name = "pnx4008-watchdog", |
| 249 | .of_match_table = of_match_ptr(pnx4008_wdt_match), |
| 250 | }, |
| 251 | .probe = pnx4008_wdt_probe, |
| 252 | .remove = pnx4008_wdt_remove, |
| 253 | }; |
| 254 | |
| 255 | module_platform_driver(platform_wdt_driver); |
| 256 | |
| 257 | MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>"); |
| 258 | MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>"); |
| 259 | MODULE_DESCRIPTION("PNX4008 Watchdog Driver"); |
| 260 | |
| 261 | module_param(heartbeat, uint, 0); |
| 262 | MODULE_PARM_DESC(heartbeat, |
| 263 | "Watchdog heartbeat period in seconds from 1 to " |
| 264 | __MODULE_STRING(MAX_HEARTBEAT) ", default " |
| 265 | __MODULE_STRING(DEFAULT_HEARTBEAT)); |
| 266 | |
| 267 | module_param(nowayout, bool, 0); |
| 268 | MODULE_PARM_DESC(nowayout, |
| 269 | "Set to 1 to keep watchdog running after device release"); |
| 270 | |
| 271 | MODULE_LICENSE("GPL"); |
| 272 | MODULE_ALIAS("platform:pnx4008-watchdog"); |