| rjw | 1f88458 | 2022-01-06 17:20:42 +0800 | [diff] [blame] | 1 | /* | 
|  | 2 | * | 
|  | 3 | *  A driver for Nokia Connectivity Card DTL-1 devices | 
|  | 4 | * | 
|  | 5 | *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org> | 
|  | 6 | * | 
|  | 7 | * | 
|  | 8 | *  This program is free software; you can redistribute it and/or modify | 
|  | 9 | *  it under the terms of the GNU General Public License version 2 as | 
|  | 10 | *  published by the Free Software Foundation; | 
|  | 11 | * | 
|  | 12 | *  Software distributed under the License is distributed on an "AS | 
|  | 13 | *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or | 
|  | 14 | *  implied. See the License for the specific language governing | 
|  | 15 | *  rights and limitations under the License. | 
|  | 16 | * | 
|  | 17 | *  The initial developer of the original code is David A. Hinds | 
|  | 18 | *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds | 
|  | 19 | *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved. | 
|  | 20 | * | 
|  | 21 | */ | 
|  | 22 |  | 
|  | 23 | #include <linux/module.h> | 
|  | 24 |  | 
|  | 25 | #include <linux/kernel.h> | 
|  | 26 | #include <linux/init.h> | 
|  | 27 | #include <linux/slab.h> | 
|  | 28 | #include <linux/types.h> | 
|  | 29 | #include <linux/delay.h> | 
|  | 30 | #include <linux/errno.h> | 
|  | 31 | #include <linux/ptrace.h> | 
|  | 32 | #include <linux/ioport.h> | 
|  | 33 | #include <linux/spinlock.h> | 
|  | 34 | #include <linux/moduleparam.h> | 
|  | 35 |  | 
|  | 36 | #include <linux/skbuff.h> | 
|  | 37 | #include <linux/string.h> | 
|  | 38 | #include <linux/serial.h> | 
|  | 39 | #include <linux/serial_reg.h> | 
|  | 40 | #include <linux/bitops.h> | 
|  | 41 | #include <asm/io.h> | 
|  | 42 |  | 
|  | 43 | #include <pcmcia/cistpl.h> | 
|  | 44 | #include <pcmcia/ciscode.h> | 
|  | 45 | #include <pcmcia/ds.h> | 
|  | 46 | #include <pcmcia/cisreg.h> | 
|  | 47 |  | 
|  | 48 | #include <net/bluetooth/bluetooth.h> | 
|  | 49 | #include <net/bluetooth/hci_core.h> | 
|  | 50 |  | 
|  | 51 |  | 
|  | 52 |  | 
|  | 53 | /* ======================== Module parameters ======================== */ | 
|  | 54 |  | 
|  | 55 |  | 
|  | 56 | MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); | 
|  | 57 | MODULE_DESCRIPTION("Bluetooth driver for Nokia Connectivity Card DTL-1"); | 
|  | 58 | MODULE_LICENSE("GPL"); | 
|  | 59 |  | 
|  | 60 |  | 
|  | 61 |  | 
|  | 62 | /* ======================== Local structures ======================== */ | 
|  | 63 |  | 
|  | 64 |  | 
|  | 65 | struct dtl1_info { | 
|  | 66 | struct pcmcia_device *p_dev; | 
|  | 67 |  | 
|  | 68 | struct hci_dev *hdev; | 
|  | 69 |  | 
|  | 70 | spinlock_t lock;		/* For serializing operations */ | 
|  | 71 |  | 
|  | 72 | unsigned long flowmask;		/* HCI flow mask */ | 
|  | 73 | int ri_latch; | 
|  | 74 |  | 
|  | 75 | struct sk_buff_head txq; | 
|  | 76 | unsigned long tx_state; | 
|  | 77 |  | 
|  | 78 | unsigned long rx_state; | 
|  | 79 | unsigned long rx_count; | 
|  | 80 | struct sk_buff *rx_skb; | 
|  | 81 | }; | 
|  | 82 |  | 
|  | 83 |  | 
|  | 84 | static int dtl1_config(struct pcmcia_device *link); | 
|  | 85 |  | 
|  | 86 |  | 
|  | 87 | /* Transmit states  */ | 
|  | 88 | #define XMIT_SENDING  1 | 
|  | 89 | #define XMIT_WAKEUP   2 | 
|  | 90 | #define XMIT_WAITING  8 | 
|  | 91 |  | 
|  | 92 | /* Receiver States */ | 
|  | 93 | #define RECV_WAIT_NSH   0 | 
|  | 94 | #define RECV_WAIT_DATA  1 | 
|  | 95 |  | 
|  | 96 |  | 
|  | 97 | struct nsh { | 
|  | 98 | u8 type; | 
|  | 99 | u8 zero; | 
|  | 100 | u16 len; | 
|  | 101 | } __packed;	/* Nokia Specific Header */ | 
|  | 102 |  | 
|  | 103 | #define NSHL  4				/* Nokia Specific Header Length */ | 
|  | 104 |  | 
|  | 105 |  | 
|  | 106 |  | 
|  | 107 | /* ======================== Interrupt handling ======================== */ | 
|  | 108 |  | 
|  | 109 |  | 
|  | 110 | static int dtl1_write(unsigned int iobase, int fifo_size, __u8 *buf, int len) | 
|  | 111 | { | 
|  | 112 | int actual = 0; | 
|  | 113 |  | 
|  | 114 | /* Tx FIFO should be empty */ | 
|  | 115 | if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) | 
|  | 116 | return 0; | 
|  | 117 |  | 
|  | 118 | /* Fill FIFO with current frame */ | 
|  | 119 | while ((fifo_size-- > 0) && (actual < len)) { | 
|  | 120 | /* Transmit next byte */ | 
|  | 121 | outb(buf[actual], iobase + UART_TX); | 
|  | 122 | actual++; | 
|  | 123 | } | 
|  | 124 |  | 
|  | 125 | return actual; | 
|  | 126 | } | 
|  | 127 |  | 
|  | 128 |  | 
|  | 129 | static void dtl1_write_wakeup(struct dtl1_info *info) | 
|  | 130 | { | 
|  | 131 | if (!info) { | 
|  | 132 | BT_ERR("Unknown device"); | 
|  | 133 | return; | 
|  | 134 | } | 
|  | 135 |  | 
|  | 136 | if (test_bit(XMIT_WAITING, &(info->tx_state))) { | 
|  | 137 | set_bit(XMIT_WAKEUP, &(info->tx_state)); | 
|  | 138 | return; | 
|  | 139 | } | 
|  | 140 |  | 
|  | 141 | if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) { | 
|  | 142 | set_bit(XMIT_WAKEUP, &(info->tx_state)); | 
|  | 143 | return; | 
|  | 144 | } | 
|  | 145 |  | 
|  | 146 | do { | 
|  | 147 | unsigned int iobase = info->p_dev->resource[0]->start; | 
|  | 148 | register struct sk_buff *skb; | 
|  | 149 | int len; | 
|  | 150 |  | 
|  | 151 | clear_bit(XMIT_WAKEUP, &(info->tx_state)); | 
|  | 152 |  | 
|  | 153 | if (!pcmcia_dev_present(info->p_dev)) | 
|  | 154 | return; | 
|  | 155 |  | 
|  | 156 | skb = skb_dequeue(&(info->txq)); | 
|  | 157 | if (!skb) | 
|  | 158 | break; | 
|  | 159 |  | 
|  | 160 | /* Send frame */ | 
|  | 161 | len = dtl1_write(iobase, 32, skb->data, skb->len); | 
|  | 162 |  | 
|  | 163 | if (len == skb->len) { | 
|  | 164 | set_bit(XMIT_WAITING, &(info->tx_state)); | 
|  | 165 | kfree_skb(skb); | 
|  | 166 | } else { | 
|  | 167 | skb_pull(skb, len); | 
|  | 168 | skb_queue_head(&(info->txq), skb); | 
|  | 169 | } | 
|  | 170 |  | 
|  | 171 | info->hdev->stat.byte_tx += len; | 
|  | 172 |  | 
|  | 173 | } while (test_bit(XMIT_WAKEUP, &(info->tx_state))); | 
|  | 174 |  | 
|  | 175 | clear_bit(XMIT_SENDING, &(info->tx_state)); | 
|  | 176 | } | 
|  | 177 |  | 
|  | 178 |  | 
|  | 179 | static void dtl1_control(struct dtl1_info *info, struct sk_buff *skb) | 
|  | 180 | { | 
|  | 181 | u8 flowmask = *(u8 *)skb->data; | 
|  | 182 | int i; | 
|  | 183 |  | 
|  | 184 | printk(KERN_INFO "Bluetooth: Nokia control data ="); | 
|  | 185 | for (i = 0; i < skb->len; i++) | 
|  | 186 | printk(" %02x", skb->data[i]); | 
|  | 187 |  | 
|  | 188 | printk("\n"); | 
|  | 189 |  | 
|  | 190 | /* transition to active state */ | 
|  | 191 | if (((info->flowmask & 0x07) == 0) && ((flowmask & 0x07) != 0)) { | 
|  | 192 | clear_bit(XMIT_WAITING, &(info->tx_state)); | 
|  | 193 | dtl1_write_wakeup(info); | 
|  | 194 | } | 
|  | 195 |  | 
|  | 196 | info->flowmask = flowmask; | 
|  | 197 |  | 
|  | 198 | kfree_skb(skb); | 
|  | 199 | } | 
|  | 200 |  | 
|  | 201 |  | 
|  | 202 | static void dtl1_receive(struct dtl1_info *info) | 
|  | 203 | { | 
|  | 204 | unsigned int iobase; | 
|  | 205 | struct nsh *nsh; | 
|  | 206 | int boguscount = 0; | 
|  | 207 |  | 
|  | 208 | if (!info) { | 
|  | 209 | BT_ERR("Unknown device"); | 
|  | 210 | return; | 
|  | 211 | } | 
|  | 212 |  | 
|  | 213 | iobase = info->p_dev->resource[0]->start; | 
|  | 214 |  | 
|  | 215 | do { | 
|  | 216 | info->hdev->stat.byte_rx++; | 
|  | 217 |  | 
|  | 218 | /* Allocate packet */ | 
|  | 219 | if (info->rx_skb == NULL) { | 
|  | 220 | info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC); | 
|  | 221 | if (!info->rx_skb) { | 
|  | 222 | BT_ERR("Can't allocate mem for new packet"); | 
|  | 223 | info->rx_state = RECV_WAIT_NSH; | 
|  | 224 | info->rx_count = NSHL; | 
|  | 225 | return; | 
|  | 226 | } | 
|  | 227 | } | 
|  | 228 |  | 
|  | 229 | skb_put_u8(info->rx_skb, inb(iobase + UART_RX)); | 
|  | 230 | nsh = (struct nsh *)info->rx_skb->data; | 
|  | 231 |  | 
|  | 232 | info->rx_count--; | 
|  | 233 |  | 
|  | 234 | if (info->rx_count == 0) { | 
|  | 235 |  | 
|  | 236 | switch (info->rx_state) { | 
|  | 237 | case RECV_WAIT_NSH: | 
|  | 238 | info->rx_state = RECV_WAIT_DATA; | 
|  | 239 | info->rx_count = nsh->len + (nsh->len & 0x0001); | 
|  | 240 | break; | 
|  | 241 | case RECV_WAIT_DATA: | 
|  | 242 | hci_skb_pkt_type(info->rx_skb) = nsh->type; | 
|  | 243 |  | 
|  | 244 | /* remove PAD byte if it exists */ | 
|  | 245 | if (nsh->len & 0x0001) { | 
|  | 246 | info->rx_skb->tail--; | 
|  | 247 | info->rx_skb->len--; | 
|  | 248 | } | 
|  | 249 |  | 
|  | 250 | /* remove NSH */ | 
|  | 251 | skb_pull(info->rx_skb, NSHL); | 
|  | 252 |  | 
|  | 253 | switch (hci_skb_pkt_type(info->rx_skb)) { | 
|  | 254 | case 0x80: | 
|  | 255 | /* control data for the Nokia Card */ | 
|  | 256 | dtl1_control(info, info->rx_skb); | 
|  | 257 | break; | 
|  | 258 | case 0x82: | 
|  | 259 | case 0x83: | 
|  | 260 | case 0x84: | 
|  | 261 | /* send frame to the HCI layer */ | 
|  | 262 | hci_skb_pkt_type(info->rx_skb) &= 0x0f; | 
|  | 263 | hci_recv_frame(info->hdev, info->rx_skb); | 
|  | 264 | break; | 
|  | 265 | default: | 
|  | 266 | /* unknown packet */ | 
|  | 267 | BT_ERR("Unknown HCI packet with type 0x%02x received", | 
|  | 268 | hci_skb_pkt_type(info->rx_skb)); | 
|  | 269 | kfree_skb(info->rx_skb); | 
|  | 270 | break; | 
|  | 271 | } | 
|  | 272 |  | 
|  | 273 | info->rx_state = RECV_WAIT_NSH; | 
|  | 274 | info->rx_count = NSHL; | 
|  | 275 | info->rx_skb = NULL; | 
|  | 276 | break; | 
|  | 277 | } | 
|  | 278 |  | 
|  | 279 | } | 
|  | 280 |  | 
|  | 281 | /* Make sure we don't stay here too long */ | 
|  | 282 | if (boguscount++ > 32) | 
|  | 283 | break; | 
|  | 284 |  | 
|  | 285 | } while (inb(iobase + UART_LSR) & UART_LSR_DR); | 
|  | 286 | } | 
|  | 287 |  | 
|  | 288 |  | 
|  | 289 | static irqreturn_t dtl1_interrupt(int irq, void *dev_inst) | 
|  | 290 | { | 
|  | 291 | struct dtl1_info *info = dev_inst; | 
|  | 292 | unsigned int iobase; | 
|  | 293 | unsigned char msr; | 
|  | 294 | int boguscount = 0; | 
|  | 295 | int iir, lsr; | 
|  | 296 | irqreturn_t r = IRQ_NONE; | 
|  | 297 |  | 
|  | 298 | if (!info || !info->hdev) | 
|  | 299 | /* our irq handler is shared */ | 
|  | 300 | return IRQ_NONE; | 
|  | 301 |  | 
|  | 302 | iobase = info->p_dev->resource[0]->start; | 
|  | 303 |  | 
|  | 304 | spin_lock(&(info->lock)); | 
|  | 305 |  | 
|  | 306 | iir = inb(iobase + UART_IIR) & UART_IIR_ID; | 
|  | 307 | while (iir) { | 
|  | 308 |  | 
|  | 309 | r = IRQ_HANDLED; | 
|  | 310 | /* Clear interrupt */ | 
|  | 311 | lsr = inb(iobase + UART_LSR); | 
|  | 312 |  | 
|  | 313 | switch (iir) { | 
|  | 314 | case UART_IIR_RLSI: | 
|  | 315 | BT_ERR("RLSI"); | 
|  | 316 | break; | 
|  | 317 | case UART_IIR_RDI: | 
|  | 318 | /* Receive interrupt */ | 
|  | 319 | dtl1_receive(info); | 
|  | 320 | break; | 
|  | 321 | case UART_IIR_THRI: | 
|  | 322 | if (lsr & UART_LSR_THRE) { | 
|  | 323 | /* Transmitter ready for data */ | 
|  | 324 | dtl1_write_wakeup(info); | 
|  | 325 | } | 
|  | 326 | break; | 
|  | 327 | default: | 
|  | 328 | BT_ERR("Unhandled IIR=%#x", iir); | 
|  | 329 | break; | 
|  | 330 | } | 
|  | 331 |  | 
|  | 332 | /* Make sure we don't stay here too long */ | 
|  | 333 | if (boguscount++ > 100) | 
|  | 334 | break; | 
|  | 335 |  | 
|  | 336 | iir = inb(iobase + UART_IIR) & UART_IIR_ID; | 
|  | 337 |  | 
|  | 338 | } | 
|  | 339 |  | 
|  | 340 | msr = inb(iobase + UART_MSR); | 
|  | 341 |  | 
|  | 342 | if (info->ri_latch ^ (msr & UART_MSR_RI)) { | 
|  | 343 | info->ri_latch = msr & UART_MSR_RI; | 
|  | 344 | clear_bit(XMIT_WAITING, &(info->tx_state)); | 
|  | 345 | dtl1_write_wakeup(info); | 
|  | 346 | r = IRQ_HANDLED; | 
|  | 347 | } | 
|  | 348 |  | 
|  | 349 | spin_unlock(&(info->lock)); | 
|  | 350 |  | 
|  | 351 | return r; | 
|  | 352 | } | 
|  | 353 |  | 
|  | 354 |  | 
|  | 355 |  | 
|  | 356 | /* ======================== HCI interface ======================== */ | 
|  | 357 |  | 
|  | 358 |  | 
|  | 359 | static int dtl1_hci_open(struct hci_dev *hdev) | 
|  | 360 | { | 
|  | 361 | return 0; | 
|  | 362 | } | 
|  | 363 |  | 
|  | 364 |  | 
|  | 365 | static int dtl1_hci_flush(struct hci_dev *hdev) | 
|  | 366 | { | 
|  | 367 | struct dtl1_info *info = hci_get_drvdata(hdev); | 
|  | 368 |  | 
|  | 369 | /* Drop TX queue */ | 
|  | 370 | skb_queue_purge(&(info->txq)); | 
|  | 371 |  | 
|  | 372 | return 0; | 
|  | 373 | } | 
|  | 374 |  | 
|  | 375 |  | 
|  | 376 | static int dtl1_hci_close(struct hci_dev *hdev) | 
|  | 377 | { | 
|  | 378 | dtl1_hci_flush(hdev); | 
|  | 379 |  | 
|  | 380 | return 0; | 
|  | 381 | } | 
|  | 382 |  | 
|  | 383 |  | 
|  | 384 | static int dtl1_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | 385 | { | 
|  | 386 | struct dtl1_info *info = hci_get_drvdata(hdev); | 
|  | 387 | struct sk_buff *s; | 
|  | 388 | struct nsh nsh; | 
|  | 389 |  | 
|  | 390 | switch (hci_skb_pkt_type(skb)) { | 
|  | 391 | case HCI_COMMAND_PKT: | 
|  | 392 | hdev->stat.cmd_tx++; | 
|  | 393 | nsh.type = 0x81; | 
|  | 394 | break; | 
|  | 395 | case HCI_ACLDATA_PKT: | 
|  | 396 | hdev->stat.acl_tx++; | 
|  | 397 | nsh.type = 0x82; | 
|  | 398 | break; | 
|  | 399 | case HCI_SCODATA_PKT: | 
|  | 400 | hdev->stat.sco_tx++; | 
|  | 401 | nsh.type = 0x83; | 
|  | 402 | break; | 
|  | 403 | default: | 
|  | 404 | return -EILSEQ; | 
|  | 405 | } | 
|  | 406 |  | 
|  | 407 | nsh.zero = 0; | 
|  | 408 | nsh.len = skb->len; | 
|  | 409 |  | 
|  | 410 | s = bt_skb_alloc(NSHL + skb->len + 1, GFP_ATOMIC); | 
|  | 411 | if (!s) | 
|  | 412 | return -ENOMEM; | 
|  | 413 |  | 
|  | 414 | skb_reserve(s, NSHL); | 
|  | 415 | skb_copy_from_linear_data(skb, skb_put(s, skb->len), skb->len); | 
|  | 416 | if (skb->len & 0x0001) | 
|  | 417 | skb_put_u8(s, 0);	/* PAD */ | 
|  | 418 |  | 
|  | 419 | /* Prepend skb with Nokia frame header and queue */ | 
|  | 420 | memcpy(skb_push(s, NSHL), &nsh, NSHL); | 
|  | 421 | skb_queue_tail(&(info->txq), s); | 
|  | 422 |  | 
|  | 423 | dtl1_write_wakeup(info); | 
|  | 424 |  | 
|  | 425 | kfree_skb(skb); | 
|  | 426 |  | 
|  | 427 | return 0; | 
|  | 428 | } | 
|  | 429 |  | 
|  | 430 |  | 
|  | 431 |  | 
|  | 432 | /* ======================== Card services HCI interaction ======================== */ | 
|  | 433 |  | 
|  | 434 |  | 
|  | 435 | static int dtl1_open(struct dtl1_info *info) | 
|  | 436 | { | 
|  | 437 | unsigned long flags; | 
|  | 438 | unsigned int iobase = info->p_dev->resource[0]->start; | 
|  | 439 | struct hci_dev *hdev; | 
|  | 440 |  | 
|  | 441 | spin_lock_init(&(info->lock)); | 
|  | 442 |  | 
|  | 443 | skb_queue_head_init(&(info->txq)); | 
|  | 444 |  | 
|  | 445 | info->rx_state = RECV_WAIT_NSH; | 
|  | 446 | info->rx_count = NSHL; | 
|  | 447 | info->rx_skb = NULL; | 
|  | 448 |  | 
|  | 449 | set_bit(XMIT_WAITING, &(info->tx_state)); | 
|  | 450 |  | 
|  | 451 | /* Initialize HCI device */ | 
|  | 452 | hdev = hci_alloc_dev(); | 
|  | 453 | if (!hdev) { | 
|  | 454 | BT_ERR("Can't allocate HCI device"); | 
|  | 455 | return -ENOMEM; | 
|  | 456 | } | 
|  | 457 |  | 
|  | 458 | info->hdev = hdev; | 
|  | 459 |  | 
|  | 460 | hdev->bus = HCI_PCCARD; | 
|  | 461 | hci_set_drvdata(hdev, info); | 
|  | 462 | SET_HCIDEV_DEV(hdev, &info->p_dev->dev); | 
|  | 463 |  | 
|  | 464 | hdev->open  = dtl1_hci_open; | 
|  | 465 | hdev->close = dtl1_hci_close; | 
|  | 466 | hdev->flush = dtl1_hci_flush; | 
|  | 467 | hdev->send  = dtl1_hci_send_frame; | 
|  | 468 |  | 
|  | 469 | spin_lock_irqsave(&(info->lock), flags); | 
|  | 470 |  | 
|  | 471 | /* Reset UART */ | 
|  | 472 | outb(0, iobase + UART_MCR); | 
|  | 473 |  | 
|  | 474 | /* Turn off interrupts */ | 
|  | 475 | outb(0, iobase + UART_IER); | 
|  | 476 |  | 
|  | 477 | /* Initialize UART */ | 
|  | 478 | outb(UART_LCR_WLEN8, iobase + UART_LCR);	/* Reset DLAB */ | 
|  | 479 | outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR); | 
|  | 480 |  | 
|  | 481 | info->ri_latch = inb(info->p_dev->resource[0]->start + UART_MSR) | 
|  | 482 | & UART_MSR_RI; | 
|  | 483 |  | 
|  | 484 | /* Turn on interrupts */ | 
|  | 485 | outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); | 
|  | 486 |  | 
|  | 487 | spin_unlock_irqrestore(&(info->lock), flags); | 
|  | 488 |  | 
|  | 489 | /* Timeout before it is safe to send the first HCI packet */ | 
|  | 490 | msleep(2000); | 
|  | 491 |  | 
|  | 492 | /* Register HCI device */ | 
|  | 493 | if (hci_register_dev(hdev) < 0) { | 
|  | 494 | BT_ERR("Can't register HCI device"); | 
|  | 495 | info->hdev = NULL; | 
|  | 496 | hci_free_dev(hdev); | 
|  | 497 | return -ENODEV; | 
|  | 498 | } | 
|  | 499 |  | 
|  | 500 | return 0; | 
|  | 501 | } | 
|  | 502 |  | 
|  | 503 |  | 
|  | 504 | static int dtl1_close(struct dtl1_info *info) | 
|  | 505 | { | 
|  | 506 | unsigned long flags; | 
|  | 507 | unsigned int iobase = info->p_dev->resource[0]->start; | 
|  | 508 | struct hci_dev *hdev = info->hdev; | 
|  | 509 |  | 
|  | 510 | if (!hdev) | 
|  | 511 | return -ENODEV; | 
|  | 512 |  | 
|  | 513 | dtl1_hci_close(hdev); | 
|  | 514 |  | 
|  | 515 | spin_lock_irqsave(&(info->lock), flags); | 
|  | 516 |  | 
|  | 517 | /* Reset UART */ | 
|  | 518 | outb(0, iobase + UART_MCR); | 
|  | 519 |  | 
|  | 520 | /* Turn off interrupts */ | 
|  | 521 | outb(0, iobase + UART_IER); | 
|  | 522 |  | 
|  | 523 | spin_unlock_irqrestore(&(info->lock), flags); | 
|  | 524 |  | 
|  | 525 | hci_unregister_dev(hdev); | 
|  | 526 | hci_free_dev(hdev); | 
|  | 527 |  | 
|  | 528 | return 0; | 
|  | 529 | } | 
|  | 530 |  | 
|  | 531 | static int dtl1_probe(struct pcmcia_device *link) | 
|  | 532 | { | 
|  | 533 | struct dtl1_info *info; | 
|  | 534 |  | 
|  | 535 | /* Create new info device */ | 
|  | 536 | info = devm_kzalloc(&link->dev, sizeof(*info), GFP_KERNEL); | 
|  | 537 | if (!info) | 
|  | 538 | return -ENOMEM; | 
|  | 539 |  | 
|  | 540 | info->p_dev = link; | 
|  | 541 | link->priv = info; | 
|  | 542 |  | 
|  | 543 | link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; | 
|  | 544 |  | 
|  | 545 | return dtl1_config(link); | 
|  | 546 | } | 
|  | 547 |  | 
|  | 548 |  | 
|  | 549 | static void dtl1_detach(struct pcmcia_device *link) | 
|  | 550 | { | 
|  | 551 | struct dtl1_info *info = link->priv; | 
|  | 552 |  | 
|  | 553 | dtl1_close(info); | 
|  | 554 | pcmcia_disable_device(link); | 
|  | 555 | } | 
|  | 556 |  | 
|  | 557 | static int dtl1_confcheck(struct pcmcia_device *p_dev, void *priv_data) | 
|  | 558 | { | 
|  | 559 | if ((p_dev->resource[1]->end) || (p_dev->resource[1]->end < 8)) | 
|  | 560 | return -ENODEV; | 
|  | 561 |  | 
|  | 562 | p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; | 
|  | 563 | p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; | 
|  | 564 |  | 
|  | 565 | return pcmcia_request_io(p_dev); | 
|  | 566 | } | 
|  | 567 |  | 
|  | 568 | static int dtl1_config(struct pcmcia_device *link) | 
|  | 569 | { | 
|  | 570 | struct dtl1_info *info = link->priv; | 
|  | 571 | int ret; | 
|  | 572 |  | 
|  | 573 | /* Look for a generic full-sized window */ | 
|  | 574 | link->resource[0]->end = 8; | 
|  | 575 | ret = pcmcia_loop_config(link, dtl1_confcheck, NULL); | 
|  | 576 | if (ret) | 
|  | 577 | goto failed; | 
|  | 578 |  | 
|  | 579 | ret = pcmcia_request_irq(link, dtl1_interrupt); | 
|  | 580 | if (ret) | 
|  | 581 | goto failed; | 
|  | 582 |  | 
|  | 583 | ret = pcmcia_enable_device(link); | 
|  | 584 | if (ret) | 
|  | 585 | goto failed; | 
|  | 586 |  | 
|  | 587 | ret = dtl1_open(info); | 
|  | 588 | if (ret) | 
|  | 589 | goto failed; | 
|  | 590 |  | 
|  | 591 | return 0; | 
|  | 592 |  | 
|  | 593 | failed: | 
|  | 594 | dtl1_detach(link); | 
|  | 595 | return ret; | 
|  | 596 | } | 
|  | 597 |  | 
|  | 598 | static const struct pcmcia_device_id dtl1_ids[] = { | 
|  | 599 | PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-1", 0xe1bfdd64, 0xe168480d), | 
|  | 600 | PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-4", 0xe1bfdd64, 0x9102bc82), | 
|  | 601 | PCMCIA_DEVICE_PROD_ID12("Socket", "CF", 0xb38bcc2e, 0x44ebf863), | 
|  | 602 | PCMCIA_DEVICE_PROD_ID12("Socket", "CF+ Personal Network Card", 0xb38bcc2e, 0xe732bae3), | 
|  | 603 | PCMCIA_DEVICE_NULL | 
|  | 604 | }; | 
|  | 605 | MODULE_DEVICE_TABLE(pcmcia, dtl1_ids); | 
|  | 606 |  | 
|  | 607 | static struct pcmcia_driver dtl1_driver = { | 
|  | 608 | .owner		= THIS_MODULE, | 
|  | 609 | .name		= "dtl1_cs", | 
|  | 610 | .probe		= dtl1_probe, | 
|  | 611 | .remove		= dtl1_detach, | 
|  | 612 | .id_table	= dtl1_ids, | 
|  | 613 | }; | 
|  | 614 | module_pcmcia_driver(dtl1_driver); |