| rjw | 1f88458 | 2022-01-06 17:20:42 +0800 | [diff] [blame] | 1 | /** | 
 | 2 |  * IIO driver for the MiraMEMS DA311 3-axis accelerometer | 
 | 3 |  * | 
 | 4 |  * Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com> | 
 | 5 |  * Copyright (c) 2011-2013 MiraMEMS Sensing Technology Co., Ltd. | 
 | 6 |  * | 
 | 7 |  * This program is free software; you can redistribute it and/or modify it | 
 | 8 |  * under the terms and conditions of the GNU General Public License, | 
 | 9 |  * version 2, as published by the Free Software Foundation. | 
 | 10 |  */ | 
 | 11 |  | 
 | 12 | #include <linux/module.h> | 
 | 13 | #include <linux/i2c.h> | 
 | 14 | #include <linux/iio/iio.h> | 
 | 15 | #include <linux/iio/sysfs.h> | 
 | 16 | #include <linux/byteorder/generic.h> | 
 | 17 |  | 
 | 18 | #define DA311_CHIP_ID			0x13 | 
 | 19 |  | 
 | 20 | /* | 
 | 21 |  * Note register addressed go from 0 - 0x3f and then wrap. | 
 | 22 |  * For some reason there are 2 banks with 0 - 0x3f addresses, | 
 | 23 |  * rather then a single 0-0x7f bank. | 
 | 24 |  */ | 
 | 25 |  | 
 | 26 | /* Bank 0 regs */ | 
 | 27 | #define DA311_REG_BANK			0x0000 | 
 | 28 | #define DA311_REG_LDO_REG		0x0006 | 
 | 29 | #define DA311_REG_CHIP_ID		0x000f | 
 | 30 | #define DA311_REG_TEMP_CFG_REG		0x001f | 
 | 31 | #define DA311_REG_CTRL_REG1		0x0020 | 
 | 32 | #define DA311_REG_CTRL_REG3		0x0022 | 
 | 33 | #define DA311_REG_CTRL_REG4		0x0023 | 
 | 34 | #define DA311_REG_CTRL_REG5		0x0024 | 
 | 35 | #define DA311_REG_CTRL_REG6		0x0025 | 
 | 36 | #define DA311_REG_STATUS_REG		0x0027 | 
 | 37 | #define DA311_REG_OUT_X_L		0x0028 | 
 | 38 | #define DA311_REG_OUT_X_H		0x0029 | 
 | 39 | #define DA311_REG_OUT_Y_L		0x002a | 
 | 40 | #define DA311_REG_OUT_Y_H		0x002b | 
 | 41 | #define DA311_REG_OUT_Z_L		0x002c | 
 | 42 | #define DA311_REG_OUT_Z_H		0x002d | 
 | 43 | #define DA311_REG_INT1_CFG		0x0030 | 
 | 44 | #define DA311_REG_INT1_SRC		0x0031 | 
 | 45 | #define DA311_REG_INT1_THS		0x0032 | 
 | 46 | #define DA311_REG_INT1_DURATION		0x0033 | 
 | 47 | #define DA311_REG_INT2_CFG		0x0034 | 
 | 48 | #define DA311_REG_INT2_SRC		0x0035 | 
 | 49 | #define DA311_REG_INT2_THS		0x0036 | 
 | 50 | #define DA311_REG_INT2_DURATION		0x0037 | 
 | 51 | #define DA311_REG_CLICK_CFG		0x0038 | 
 | 52 | #define DA311_REG_CLICK_SRC		0x0039 | 
 | 53 | #define DA311_REG_CLICK_THS		0x003a | 
 | 54 | #define DA311_REG_TIME_LIMIT		0x003b | 
 | 55 | #define DA311_REG_TIME_LATENCY		0x003c | 
 | 56 | #define DA311_REG_TIME_WINDOW		0x003d | 
 | 57 |  | 
 | 58 | /* Bank 1 regs */ | 
 | 59 | #define DA311_REG_SOFT_RESET		0x0105 | 
 | 60 | #define DA311_REG_OTP_XOFF_L		0x0110 | 
 | 61 | #define DA311_REG_OTP_XOFF_H		0x0111 | 
 | 62 | #define DA311_REG_OTP_YOFF_L		0x0112 | 
 | 63 | #define DA311_REG_OTP_YOFF_H		0x0113 | 
 | 64 | #define DA311_REG_OTP_ZOFF_L		0x0114 | 
 | 65 | #define DA311_REG_OTP_ZOFF_H		0x0115 | 
 | 66 | #define DA311_REG_OTP_XSO		0x0116 | 
 | 67 | #define DA311_REG_OTP_YSO		0x0117 | 
 | 68 | #define DA311_REG_OTP_ZSO		0x0118 | 
 | 69 | #define DA311_REG_OTP_TRIM_OSC		0x011b | 
 | 70 | #define DA311_REG_LPF_ABSOLUTE		0x011c | 
 | 71 | #define DA311_REG_TEMP_OFF1		0x0127 | 
 | 72 | #define DA311_REG_TEMP_OFF2		0x0128 | 
 | 73 | #define DA311_REG_TEMP_OFF3		0x0129 | 
 | 74 | #define DA311_REG_OTP_TRIM_THERM_H	0x011a | 
 | 75 |  | 
 | 76 | /* | 
 | 77 |  * a value of + or -1024 corresponds to + or - 1G | 
 | 78 |  * scale = 9.81 / 1024 = 0.009580078 | 
 | 79 |  */ | 
 | 80 |  | 
 | 81 | static const int da311_nscale = 9580078; | 
 | 82 |  | 
 | 83 | #define DA311_CHANNEL(reg, axis) {	\ | 
 | 84 | 	.type = IIO_ACCEL,	\ | 
 | 85 | 	.address = reg,	\ | 
 | 86 | 	.modified = 1,	\ | 
 | 87 | 	.channel2 = IIO_MOD_##axis,	\ | 
 | 88 | 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\ | 
 | 89 | 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\ | 
 | 90 | } | 
 | 91 |  | 
 | 92 | static const struct iio_chan_spec da311_channels[] = { | 
 | 93 | 	/* | 0x80 comes from the android driver */ | 
 | 94 | 	DA311_CHANNEL(DA311_REG_OUT_X_L | 0x80, X), | 
 | 95 | 	DA311_CHANNEL(DA311_REG_OUT_Y_L | 0x80, Y), | 
 | 96 | 	DA311_CHANNEL(DA311_REG_OUT_Z_L | 0x80, Z), | 
 | 97 | }; | 
 | 98 |  | 
 | 99 | struct da311_data { | 
 | 100 | 	struct i2c_client *client; | 
 | 101 | }; | 
 | 102 |  | 
 | 103 | static int da311_register_mask_write(struct i2c_client *client, u16 addr, | 
 | 104 | 				     u8 mask, u8 data) | 
 | 105 | { | 
 | 106 | 	int ret; | 
 | 107 | 	u8 tmp_data = 0; | 
 | 108 |  | 
 | 109 | 	if (addr & 0xff00) { | 
 | 110 | 		/* Select bank 1 */ | 
 | 111 | 		ret = i2c_smbus_write_byte_data(client, DA311_REG_BANK, 0x01); | 
 | 112 | 		if (ret < 0) | 
 | 113 | 			return ret; | 
 | 114 | 	} | 
 | 115 |  | 
 | 116 | 	if (mask != 0xff) { | 
 | 117 | 		ret = i2c_smbus_read_byte_data(client, addr); | 
 | 118 | 		if (ret < 0) | 
 | 119 | 			return ret; | 
 | 120 | 		tmp_data = ret; | 
 | 121 | 	} | 
 | 122 |  | 
 | 123 | 	tmp_data &= ~mask; | 
 | 124 | 	tmp_data |= data & mask; | 
 | 125 | 	ret = i2c_smbus_write_byte_data(client, addr & 0xff, tmp_data); | 
 | 126 | 	if (ret < 0) | 
 | 127 | 		return ret; | 
 | 128 |  | 
 | 129 | 	if (addr & 0xff00) { | 
 | 130 | 		/* Back to bank 0 */ | 
 | 131 | 		ret = i2c_smbus_write_byte_data(client, DA311_REG_BANK, 0x00); | 
 | 132 | 		if (ret < 0) | 
 | 133 | 			return ret; | 
 | 134 | 	} | 
 | 135 |  | 
 | 136 | 	return 0; | 
 | 137 | } | 
 | 138 |  | 
 | 139 | /* Init sequence taken from the android driver */ | 
 | 140 | static int da311_reset(struct i2c_client *client) | 
 | 141 | { | 
 | 142 | 	static const struct { | 
 | 143 | 		u16 addr; | 
 | 144 | 		u8 mask; | 
 | 145 | 		u8 data; | 
 | 146 | 	} init_data[] = { | 
 | 147 | 		{ DA311_REG_TEMP_CFG_REG,       0xff,   0x08 }, | 
 | 148 | 		{ DA311_REG_CTRL_REG5,          0xff,   0x80 }, | 
 | 149 | 		{ DA311_REG_CTRL_REG4,          0x30,   0x00 }, | 
 | 150 | 		{ DA311_REG_CTRL_REG1,          0xff,   0x6f }, | 
 | 151 | 		{ DA311_REG_TEMP_CFG_REG,       0xff,   0x88 }, | 
 | 152 | 		{ DA311_REG_LDO_REG,            0xff,   0x02 }, | 
 | 153 | 		{ DA311_REG_OTP_TRIM_OSC,       0xff,   0x27 }, | 
 | 154 | 		{ DA311_REG_LPF_ABSOLUTE,       0xff,   0x30 }, | 
 | 155 | 		{ DA311_REG_TEMP_OFF1,          0xff,   0x3f }, | 
 | 156 | 		{ DA311_REG_TEMP_OFF2,          0xff,   0xff }, | 
 | 157 | 		{ DA311_REG_TEMP_OFF3,          0xff,   0x0f }, | 
 | 158 | 	}; | 
 | 159 | 	int i, ret; | 
 | 160 |  | 
 | 161 | 	/* Reset */ | 
 | 162 | 	ret = da311_register_mask_write(client, DA311_REG_SOFT_RESET, | 
 | 163 | 					0xff, 0xaa); | 
 | 164 | 	if (ret < 0) | 
 | 165 | 		return ret; | 
 | 166 |  | 
 | 167 | 	for (i = 0; i < ARRAY_SIZE(init_data); i++) { | 
 | 168 | 		ret = da311_register_mask_write(client, | 
 | 169 | 						init_data[i].addr, | 
 | 170 | 						init_data[i].mask, | 
 | 171 | 						init_data[i].data); | 
 | 172 | 		if (ret < 0) | 
 | 173 | 			return ret; | 
 | 174 | 	} | 
 | 175 |  | 
 | 176 | 	return 0; | 
 | 177 | } | 
 | 178 |  | 
 | 179 | static int da311_enable(struct i2c_client *client, bool enable) | 
 | 180 | { | 
 | 181 | 	u8 data = enable ? 0x00 : 0x20; | 
 | 182 |  | 
 | 183 | 	return da311_register_mask_write(client, DA311_REG_TEMP_CFG_REG, | 
 | 184 | 					 0x20, data); | 
 | 185 | } | 
 | 186 |  | 
 | 187 | static int da311_read_raw(struct iio_dev *indio_dev, | 
 | 188 | 				struct iio_chan_spec const *chan, | 
 | 189 | 				int *val, int *val2, long mask) | 
 | 190 | { | 
 | 191 | 	struct da311_data *data = iio_priv(indio_dev); | 
 | 192 | 	int ret; | 
 | 193 |  | 
 | 194 | 	switch (mask) { | 
 | 195 | 	case IIO_CHAN_INFO_RAW: | 
 | 196 | 		ret = i2c_smbus_read_word_data(data->client, chan->address); | 
 | 197 | 		if (ret < 0) | 
 | 198 | 			return ret; | 
 | 199 | 		/* | 
 | 200 | 		 * Values are 12 bits, stored as 16 bits with the 4 | 
 | 201 | 		 * least significant bits always 0. | 
 | 202 | 		 */ | 
 | 203 | 		*val = (short)ret >> 4; | 
 | 204 | 		return IIO_VAL_INT; | 
 | 205 | 	case IIO_CHAN_INFO_SCALE: | 
 | 206 | 		*val = 0; | 
 | 207 | 		*val2 = da311_nscale; | 
 | 208 | 		return IIO_VAL_INT_PLUS_NANO; | 
 | 209 | 	default: | 
 | 210 | 		return -EINVAL; | 
 | 211 | 	} | 
 | 212 | } | 
 | 213 |  | 
 | 214 | static const struct iio_info da311_info = { | 
 | 215 | 	.driver_module	= THIS_MODULE, | 
 | 216 | 	.read_raw	= da311_read_raw, | 
 | 217 | }; | 
 | 218 |  | 
 | 219 | static int da311_probe(struct i2c_client *client, | 
 | 220 | 			const struct i2c_device_id *id) | 
 | 221 | { | 
 | 222 | 	int ret; | 
 | 223 | 	struct iio_dev *indio_dev; | 
 | 224 | 	struct da311_data *data; | 
 | 225 |  | 
 | 226 | 	ret = i2c_smbus_read_byte_data(client, DA311_REG_CHIP_ID); | 
 | 227 | 	if (ret != DA311_CHIP_ID) | 
 | 228 | 		return (ret < 0) ? ret : -ENODEV; | 
 | 229 |  | 
 | 230 | 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); | 
 | 231 | 	if (!indio_dev) | 
 | 232 | 		return -ENOMEM; | 
 | 233 |  | 
 | 234 | 	data = iio_priv(indio_dev); | 
 | 235 | 	data->client = client; | 
 | 236 | 	i2c_set_clientdata(client, indio_dev); | 
 | 237 |  | 
 | 238 | 	indio_dev->dev.parent = &client->dev; | 
 | 239 | 	indio_dev->info = &da311_info; | 
 | 240 | 	indio_dev->name = "da311"; | 
 | 241 | 	indio_dev->modes = INDIO_DIRECT_MODE; | 
 | 242 | 	indio_dev->channels = da311_channels; | 
 | 243 | 	indio_dev->num_channels = ARRAY_SIZE(da311_channels); | 
 | 244 |  | 
 | 245 | 	ret = da311_reset(client); | 
 | 246 | 	if (ret < 0) | 
 | 247 | 		return ret; | 
 | 248 |  | 
 | 249 | 	ret = da311_enable(client, true); | 
 | 250 | 	if (ret < 0) | 
 | 251 | 		return ret; | 
 | 252 |  | 
 | 253 | 	ret = iio_device_register(indio_dev); | 
 | 254 | 	if (ret < 0) { | 
 | 255 | 		dev_err(&client->dev, "device_register failed\n"); | 
 | 256 | 		da311_enable(client, false); | 
 | 257 | 	} | 
 | 258 |  | 
 | 259 | 	return ret; | 
 | 260 | } | 
 | 261 |  | 
 | 262 | static int da311_remove(struct i2c_client *client) | 
 | 263 | { | 
 | 264 | 	struct iio_dev *indio_dev = i2c_get_clientdata(client); | 
 | 265 |  | 
 | 266 | 	iio_device_unregister(indio_dev); | 
 | 267 |  | 
 | 268 | 	return da311_enable(client, false); | 
 | 269 | } | 
 | 270 |  | 
 | 271 | #ifdef CONFIG_PM_SLEEP | 
 | 272 | static int da311_suspend(struct device *dev) | 
 | 273 | { | 
 | 274 | 	return da311_enable(to_i2c_client(dev), false); | 
 | 275 | } | 
 | 276 |  | 
 | 277 | static int da311_resume(struct device *dev) | 
 | 278 | { | 
 | 279 | 	return da311_enable(to_i2c_client(dev), true); | 
 | 280 | } | 
 | 281 | #endif | 
 | 282 |  | 
 | 283 | static SIMPLE_DEV_PM_OPS(da311_pm_ops, da311_suspend, da311_resume); | 
 | 284 |  | 
 | 285 | static const struct i2c_device_id da311_i2c_id[] = { | 
 | 286 | 	{"da311", 0}, | 
 | 287 | 	{} | 
 | 288 | }; | 
 | 289 | MODULE_DEVICE_TABLE(i2c, da311_i2c_id); | 
 | 290 |  | 
 | 291 | static struct i2c_driver da311_driver = { | 
 | 292 | 	.driver = { | 
 | 293 | 		.name = "da311", | 
 | 294 | 		.pm = &da311_pm_ops, | 
 | 295 | 	}, | 
 | 296 | 	.probe		= da311_probe, | 
 | 297 | 	.remove		= da311_remove, | 
 | 298 | 	.id_table	= da311_i2c_id, | 
 | 299 | }; | 
 | 300 |  | 
 | 301 | module_i2c_driver(da311_driver); | 
 | 302 |  | 
 | 303 | MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); | 
 | 304 | MODULE_DESCRIPTION("MiraMEMS DA311 3-Axis Accelerometer driver"); | 
 | 305 | MODULE_LICENSE("GPL v2"); |