| rjw | 1f88458 | 2022-01-06 17:20:42 +0800 | [diff] [blame] | 1 | /* | 
|  | 2 | * drivers/leds/leds-as3645a.c - AS3645A and LM3555 flash controllers driver | 
|  | 3 | * | 
|  | 4 | * Copyright (C) 2008-2011 Nokia Corporation | 
|  | 5 | * Copyright (c) 2011, 2017 Intel Corporation. | 
|  | 6 | * | 
|  | 7 | * Based on drivers/media/i2c/as3645a.c. | 
|  | 8 | * | 
|  | 9 | * Contact: Sakari Ailus <sakari.ailus@iki.fi> | 
|  | 10 | * | 
|  | 11 | * This program is free software; you can redistribute it and/or | 
|  | 12 | * modify it under the terms of the GNU General Public License | 
|  | 13 | * version 2 as published by the Free Software Foundation. | 
|  | 14 | * | 
|  | 15 | * This program is distributed in the hope that it will be useful, but | 
|  | 16 | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | 17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | 18 | * General Public License for more details. | 
|  | 19 | */ | 
|  | 20 |  | 
|  | 21 | #include <linux/delay.h> | 
|  | 22 | #include <linux/gpio/consumer.h> | 
|  | 23 | #include <linux/i2c.h> | 
|  | 24 | #include <linux/led-class-flash.h> | 
|  | 25 | #include <linux/leds.h> | 
|  | 26 | #include <linux/module.h> | 
|  | 27 | #include <linux/mutex.h> | 
|  | 28 | #include <linux/of.h> | 
|  | 29 | #include <linux/slab.h> | 
|  | 30 |  | 
|  | 31 | #include <media/v4l2-flash-led-class.h> | 
|  | 32 |  | 
|  | 33 | #define AS_TIMER_US_TO_CODE(t)			(((t) / 1000 - 100) / 50) | 
|  | 34 | #define AS_TIMER_CODE_TO_US(c)			((50 * (c) + 100) * 1000) | 
|  | 35 |  | 
|  | 36 | /* Register definitions */ | 
|  | 37 |  | 
|  | 38 | /* Read-only Design info register: Reset state: xxxx 0001 */ | 
|  | 39 | #define AS_DESIGN_INFO_REG			0x00 | 
|  | 40 | #define AS_DESIGN_INFO_FACTORY(x)		(((x) >> 4)) | 
|  | 41 | #define AS_DESIGN_INFO_MODEL(x)			((x) & 0x0f) | 
|  | 42 |  | 
|  | 43 | /* Read-only Version control register: Reset state: 0000 0000 | 
|  | 44 | * for first engineering samples | 
|  | 45 | */ | 
|  | 46 | #define AS_VERSION_CONTROL_REG			0x01 | 
|  | 47 | #define AS_VERSION_CONTROL_RFU(x)		(((x) >> 4)) | 
|  | 48 | #define AS_VERSION_CONTROL_VERSION(x)		((x) & 0x0f) | 
|  | 49 |  | 
|  | 50 | /* Read / Write	(Indicator and timer register): Reset state: 0000 1111 */ | 
|  | 51 | #define AS_INDICATOR_AND_TIMER_REG		0x02 | 
|  | 52 | #define AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT	0 | 
|  | 53 | #define AS_INDICATOR_AND_TIMER_VREF_SHIFT	4 | 
|  | 54 | #define AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT	6 | 
|  | 55 |  | 
|  | 56 | /* Read / Write	(Current set register): Reset state: 0110 1001 */ | 
|  | 57 | #define AS_CURRENT_SET_REG			0x03 | 
|  | 58 | #define AS_CURRENT_ASSIST_LIGHT_SHIFT		0 | 
|  | 59 | #define AS_CURRENT_LED_DET_ON			(1 << 3) | 
|  | 60 | #define AS_CURRENT_FLASH_CURRENT_SHIFT		4 | 
|  | 61 |  | 
|  | 62 | /* Read / Write	(Control register): Reset state: 1011 0100 */ | 
|  | 63 | #define AS_CONTROL_REG				0x04 | 
|  | 64 | #define AS_CONTROL_MODE_SETTING_SHIFT		0 | 
|  | 65 | #define AS_CONTROL_STROBE_ON			(1 << 2) | 
|  | 66 | #define AS_CONTROL_OUT_ON			(1 << 3) | 
|  | 67 | #define AS_CONTROL_EXT_TORCH_ON			(1 << 4) | 
|  | 68 | #define AS_CONTROL_STROBE_TYPE_EDGE		(0 << 5) | 
|  | 69 | #define AS_CONTROL_STROBE_TYPE_LEVEL		(1 << 5) | 
|  | 70 | #define AS_CONTROL_COIL_PEAK_SHIFT		6 | 
|  | 71 |  | 
|  | 72 | /* Read only (D3 is read / write) (Fault and info): Reset state: 0000 x000 */ | 
|  | 73 | #define AS_FAULT_INFO_REG			0x05 | 
|  | 74 | #define AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT	(1 << 1) | 
|  | 75 | #define AS_FAULT_INFO_INDICATOR_LED		(1 << 2) | 
|  | 76 | #define AS_FAULT_INFO_LED_AMOUNT		(1 << 3) | 
|  | 77 | #define AS_FAULT_INFO_TIMEOUT			(1 << 4) | 
|  | 78 | #define AS_FAULT_INFO_OVER_TEMPERATURE		(1 << 5) | 
|  | 79 | #define AS_FAULT_INFO_SHORT_CIRCUIT		(1 << 6) | 
|  | 80 | #define AS_FAULT_INFO_OVER_VOLTAGE		(1 << 7) | 
|  | 81 |  | 
|  | 82 | /* Boost register */ | 
|  | 83 | #define AS_BOOST_REG				0x0d | 
|  | 84 | #define AS_BOOST_CURRENT_DISABLE		(0 << 0) | 
|  | 85 | #define AS_BOOST_CURRENT_ENABLE			(1 << 0) | 
|  | 86 |  | 
|  | 87 | /* Password register is used to unlock boost register writing */ | 
|  | 88 | #define AS_PASSWORD_REG				0x0f | 
|  | 89 | #define AS_PASSWORD_UNLOCK_VALUE		0x55 | 
|  | 90 |  | 
|  | 91 | #define AS_NAME					"as3645a" | 
|  | 92 | #define AS_I2C_ADDR				(0x60 >> 1) /* W:0x60, R:0x61 */ | 
|  | 93 |  | 
|  | 94 | #define AS_FLASH_TIMEOUT_MIN			100000	/* us */ | 
|  | 95 | #define AS_FLASH_TIMEOUT_MAX			850000 | 
|  | 96 | #define AS_FLASH_TIMEOUT_STEP			50000 | 
|  | 97 |  | 
|  | 98 | #define AS_FLASH_INTENSITY_MIN			200000	/* uA */ | 
|  | 99 | #define AS_FLASH_INTENSITY_MAX_1LED		500000 | 
|  | 100 | #define AS_FLASH_INTENSITY_MAX_2LEDS		400000 | 
|  | 101 | #define AS_FLASH_INTENSITY_STEP			20000 | 
|  | 102 |  | 
|  | 103 | #define AS_TORCH_INTENSITY_MIN			20000	/* uA */ | 
|  | 104 | #define AS_TORCH_INTENSITY_MAX			160000 | 
|  | 105 | #define AS_TORCH_INTENSITY_STEP			20000 | 
|  | 106 |  | 
|  | 107 | #define AS_INDICATOR_INTENSITY_MIN		0	/* uA */ | 
|  | 108 | #define AS_INDICATOR_INTENSITY_MAX		10000 | 
|  | 109 | #define AS_INDICATOR_INTENSITY_STEP		2500 | 
|  | 110 |  | 
|  | 111 | #define AS_PEAK_mA_MAX				2000 | 
|  | 112 | #define AS_PEAK_mA_TO_REG(a) \ | 
|  | 113 | ((min_t(u32, AS_PEAK_mA_MAX, a) - 1250) / 250) | 
|  | 114 |  | 
|  | 115 | /* LED numbers for Devicetree */ | 
|  | 116 | #define AS_LED_FLASH				0 | 
|  | 117 | #define AS_LED_INDICATOR			1 | 
|  | 118 |  | 
|  | 119 | enum as_mode { | 
|  | 120 | AS_MODE_EXT_TORCH = 0 << AS_CONTROL_MODE_SETTING_SHIFT, | 
|  | 121 | AS_MODE_INDICATOR = 1 << AS_CONTROL_MODE_SETTING_SHIFT, | 
|  | 122 | AS_MODE_ASSIST = 2 << AS_CONTROL_MODE_SETTING_SHIFT, | 
|  | 123 | AS_MODE_FLASH = 3 << AS_CONTROL_MODE_SETTING_SHIFT, | 
|  | 124 | }; | 
|  | 125 |  | 
|  | 126 | struct as3645a_config { | 
|  | 127 | u32 flash_timeout_us; | 
|  | 128 | u32 flash_max_ua; | 
|  | 129 | u32 assist_max_ua; | 
|  | 130 | u32 indicator_max_ua; | 
|  | 131 | u32 voltage_reference; | 
|  | 132 | u32 peak; | 
|  | 133 | }; | 
|  | 134 |  | 
|  | 135 | struct as3645a_names { | 
|  | 136 | char flash[32]; | 
|  | 137 | char indicator[32]; | 
|  | 138 | }; | 
|  | 139 |  | 
|  | 140 | struct as3645a { | 
|  | 141 | struct i2c_client *client; | 
|  | 142 |  | 
|  | 143 | struct mutex mutex; | 
|  | 144 |  | 
|  | 145 | struct led_classdev_flash fled; | 
|  | 146 | struct led_classdev iled_cdev; | 
|  | 147 |  | 
|  | 148 | struct v4l2_flash *vf; | 
|  | 149 | struct v4l2_flash *vfind; | 
|  | 150 |  | 
|  | 151 | struct device_node *flash_node; | 
|  | 152 | struct device_node *indicator_node; | 
|  | 153 |  | 
|  | 154 | struct as3645a_config cfg; | 
|  | 155 |  | 
|  | 156 | enum as_mode mode; | 
|  | 157 | unsigned int timeout; | 
|  | 158 | unsigned int flash_current; | 
|  | 159 | unsigned int assist_current; | 
|  | 160 | unsigned int indicator_current; | 
|  | 161 | enum v4l2_flash_strobe_source strobe_source; | 
|  | 162 | }; | 
|  | 163 |  | 
|  | 164 | #define fled_to_as3645a(__fled) container_of(__fled, struct as3645a, fled) | 
|  | 165 | #define iled_cdev_to_as3645a(__iled_cdev) \ | 
|  | 166 | container_of(__iled_cdev, struct as3645a, iled_cdev) | 
|  | 167 |  | 
|  | 168 | /* Return negative errno else zero on success */ | 
|  | 169 | static int as3645a_write(struct as3645a *flash, u8 addr, u8 val) | 
|  | 170 | { | 
|  | 171 | struct i2c_client *client = flash->client; | 
|  | 172 | int rval; | 
|  | 173 |  | 
|  | 174 | rval = i2c_smbus_write_byte_data(client, addr, val); | 
|  | 175 |  | 
|  | 176 | dev_dbg(&client->dev, "Write Addr:%02X Val:%02X %s\n", addr, val, | 
|  | 177 | rval < 0 ? "fail" : "ok"); | 
|  | 178 |  | 
|  | 179 | return rval; | 
|  | 180 | } | 
|  | 181 |  | 
|  | 182 | /* Return negative errno else a data byte received from the device. */ | 
|  | 183 | static int as3645a_read(struct as3645a *flash, u8 addr) | 
|  | 184 | { | 
|  | 185 | struct i2c_client *client = flash->client; | 
|  | 186 | int rval; | 
|  | 187 |  | 
|  | 188 | rval = i2c_smbus_read_byte_data(client, addr); | 
|  | 189 |  | 
|  | 190 | dev_dbg(&client->dev, "Read Addr:%02X Val:%02X %s\n", addr, rval, | 
|  | 191 | rval < 0 ? "fail" : "ok"); | 
|  | 192 |  | 
|  | 193 | return rval; | 
|  | 194 | } | 
|  | 195 |  | 
|  | 196 | /* ----------------------------------------------------------------------------- | 
|  | 197 | * Hardware configuration and trigger | 
|  | 198 | */ | 
|  | 199 |  | 
|  | 200 | /** | 
|  | 201 | * as3645a_set_config - Set flash configuration registers | 
|  | 202 | * @flash: The flash | 
|  | 203 | * | 
|  | 204 | * Configure the hardware with flash, assist and indicator currents, as well as | 
|  | 205 | * flash timeout. | 
|  | 206 | * | 
|  | 207 | * Return 0 on success, or a negative error code if an I2C communication error | 
|  | 208 | * occurred. | 
|  | 209 | */ | 
|  | 210 | static int as3645a_set_current(struct as3645a *flash) | 
|  | 211 | { | 
|  | 212 | u8 val; | 
|  | 213 |  | 
|  | 214 | val = (flash->flash_current << AS_CURRENT_FLASH_CURRENT_SHIFT) | 
|  | 215 | | (flash->assist_current << AS_CURRENT_ASSIST_LIGHT_SHIFT) | 
|  | 216 | | AS_CURRENT_LED_DET_ON; | 
|  | 217 |  | 
|  | 218 | return as3645a_write(flash, AS_CURRENT_SET_REG, val); | 
|  | 219 | } | 
|  | 220 |  | 
|  | 221 | static int as3645a_set_timeout(struct as3645a *flash) | 
|  | 222 | { | 
|  | 223 | u8 val; | 
|  | 224 |  | 
|  | 225 | val = flash->timeout << AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT; | 
|  | 226 |  | 
|  | 227 | val |= (flash->cfg.voltage_reference | 
|  | 228 | << AS_INDICATOR_AND_TIMER_VREF_SHIFT) | 
|  | 229 | |  ((flash->indicator_current ? flash->indicator_current - 1 : 0) | 
|  | 230 | << AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT); | 
|  | 231 |  | 
|  | 232 | return as3645a_write(flash, AS_INDICATOR_AND_TIMER_REG, val); | 
|  | 233 | } | 
|  | 234 |  | 
|  | 235 | /** | 
|  | 236 | * as3645a_set_control - Set flash control register | 
|  | 237 | * @flash: The flash | 
|  | 238 | * @mode: Desired output mode | 
|  | 239 | * @on: Desired output state | 
|  | 240 | * | 
|  | 241 | * Configure the hardware with output mode and state. | 
|  | 242 | * | 
|  | 243 | * Return 0 on success, or a negative error code if an I2C communication error | 
|  | 244 | * occurred. | 
|  | 245 | */ | 
|  | 246 | static int | 
|  | 247 | as3645a_set_control(struct as3645a *flash, enum as_mode mode, bool on) | 
|  | 248 | { | 
|  | 249 | u8 reg; | 
|  | 250 |  | 
|  | 251 | /* Configure output parameters and operation mode. */ | 
|  | 252 | reg = (flash->cfg.peak << AS_CONTROL_COIL_PEAK_SHIFT) | 
|  | 253 | | (on ? AS_CONTROL_OUT_ON : 0) | 
|  | 254 | | mode; | 
|  | 255 |  | 
|  | 256 | if (mode == AS_MODE_FLASH && | 
|  | 257 | flash->strobe_source == V4L2_FLASH_STROBE_SOURCE_EXTERNAL) | 
|  | 258 | reg |= AS_CONTROL_STROBE_TYPE_LEVEL | 
|  | 259 | |  AS_CONTROL_STROBE_ON; | 
|  | 260 |  | 
|  | 261 | return as3645a_write(flash, AS_CONTROL_REG, reg); | 
|  | 262 | } | 
|  | 263 |  | 
|  | 264 | static int as3645a_get_fault(struct led_classdev_flash *fled, u32 *fault) | 
|  | 265 | { | 
|  | 266 | struct as3645a *flash = fled_to_as3645a(fled); | 
|  | 267 | int rval; | 
|  | 268 |  | 
|  | 269 | /* NOTE: reading register clears fault status */ | 
|  | 270 | rval = as3645a_read(flash, AS_FAULT_INFO_REG); | 
|  | 271 | if (rval < 0) | 
|  | 272 | return rval; | 
|  | 273 |  | 
|  | 274 | if (rval & AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT) | 
|  | 275 | *fault |= LED_FAULT_OVER_CURRENT; | 
|  | 276 |  | 
|  | 277 | if (rval & AS_FAULT_INFO_INDICATOR_LED) | 
|  | 278 | *fault |= LED_FAULT_INDICATOR; | 
|  | 279 |  | 
|  | 280 | dev_dbg(&flash->client->dev, "%u connected LEDs\n", | 
|  | 281 | rval & AS_FAULT_INFO_LED_AMOUNT ? 2 : 1); | 
|  | 282 |  | 
|  | 283 | if (rval & AS_FAULT_INFO_TIMEOUT) | 
|  | 284 | *fault |= LED_FAULT_TIMEOUT; | 
|  | 285 |  | 
|  | 286 | if (rval & AS_FAULT_INFO_OVER_TEMPERATURE) | 
|  | 287 | *fault |= LED_FAULT_OVER_TEMPERATURE; | 
|  | 288 |  | 
|  | 289 | if (rval & AS_FAULT_INFO_SHORT_CIRCUIT) | 
|  | 290 | *fault |= LED_FAULT_OVER_CURRENT; | 
|  | 291 |  | 
|  | 292 | if (rval & AS_FAULT_INFO_OVER_VOLTAGE) | 
|  | 293 | *fault |= LED_FAULT_INPUT_VOLTAGE; | 
|  | 294 |  | 
|  | 295 | return rval; | 
|  | 296 | } | 
|  | 297 |  | 
|  | 298 | static unsigned int __as3645a_current_to_reg(unsigned int min, unsigned int max, | 
|  | 299 | unsigned int step, | 
|  | 300 | unsigned int val) | 
|  | 301 | { | 
|  | 302 | if (val < min) | 
|  | 303 | val = min; | 
|  | 304 |  | 
|  | 305 | if (val > max) | 
|  | 306 | val = max; | 
|  | 307 |  | 
|  | 308 | return (val - min) / step; | 
|  | 309 | } | 
|  | 310 |  | 
|  | 311 | static unsigned int as3645a_current_to_reg(struct as3645a *flash, bool is_flash, | 
|  | 312 | unsigned int ua) | 
|  | 313 | { | 
|  | 314 | if (is_flash) | 
|  | 315 | return __as3645a_current_to_reg(AS_TORCH_INTENSITY_MIN, | 
|  | 316 | flash->cfg.assist_max_ua, | 
|  | 317 | AS_TORCH_INTENSITY_STEP, ua); | 
|  | 318 | else | 
|  | 319 | return __as3645a_current_to_reg(AS_FLASH_INTENSITY_MIN, | 
|  | 320 | flash->cfg.flash_max_ua, | 
|  | 321 | AS_FLASH_INTENSITY_STEP, ua); | 
|  | 322 | } | 
|  | 323 |  | 
|  | 324 | static int as3645a_set_indicator_brightness(struct led_classdev *iled_cdev, | 
|  | 325 | enum led_brightness brightness) | 
|  | 326 | { | 
|  | 327 | struct as3645a *flash = iled_cdev_to_as3645a(iled_cdev); | 
|  | 328 | int rval; | 
|  | 329 |  | 
|  | 330 | flash->indicator_current = brightness; | 
|  | 331 |  | 
|  | 332 | rval = as3645a_set_timeout(flash); | 
|  | 333 | if (rval) | 
|  | 334 | return rval; | 
|  | 335 |  | 
|  | 336 | return as3645a_set_control(flash, AS_MODE_INDICATOR, brightness); | 
|  | 337 | } | 
|  | 338 |  | 
|  | 339 | static int as3645a_set_assist_brightness(struct led_classdev *fled_cdev, | 
|  | 340 | enum led_brightness brightness) | 
|  | 341 | { | 
|  | 342 | struct led_classdev_flash *fled = lcdev_to_flcdev(fled_cdev); | 
|  | 343 | struct as3645a *flash = fled_to_as3645a(fled); | 
|  | 344 | int rval; | 
|  | 345 |  | 
|  | 346 | if (brightness) { | 
|  | 347 | /* Register value 0 is 20 mA. */ | 
|  | 348 | flash->assist_current = brightness - 1; | 
|  | 349 |  | 
|  | 350 | rval = as3645a_set_current(flash); | 
|  | 351 | if (rval) | 
|  | 352 | return rval; | 
|  | 353 | } | 
|  | 354 |  | 
|  | 355 | return as3645a_set_control(flash, AS_MODE_ASSIST, brightness); | 
|  | 356 | } | 
|  | 357 |  | 
|  | 358 | static int as3645a_set_flash_brightness(struct led_classdev_flash *fled, | 
|  | 359 | u32 brightness_ua) | 
|  | 360 | { | 
|  | 361 | struct as3645a *flash = fled_to_as3645a(fled); | 
|  | 362 |  | 
|  | 363 | flash->flash_current = as3645a_current_to_reg(flash, true, brightness_ua); | 
|  | 364 |  | 
|  | 365 | return as3645a_set_current(flash); | 
|  | 366 | } | 
|  | 367 |  | 
|  | 368 | static int as3645a_set_flash_timeout(struct led_classdev_flash *fled, | 
|  | 369 | u32 timeout_us) | 
|  | 370 | { | 
|  | 371 | struct as3645a *flash = fled_to_as3645a(fled); | 
|  | 372 |  | 
|  | 373 | flash->timeout = AS_TIMER_US_TO_CODE(timeout_us); | 
|  | 374 |  | 
|  | 375 | return as3645a_set_timeout(flash); | 
|  | 376 | } | 
|  | 377 |  | 
|  | 378 | static int as3645a_set_strobe(struct led_classdev_flash *fled, bool state) | 
|  | 379 | { | 
|  | 380 | struct as3645a *flash = fled_to_as3645a(fled); | 
|  | 381 |  | 
|  | 382 | return as3645a_set_control(flash, AS_MODE_FLASH, state); | 
|  | 383 | } | 
|  | 384 |  | 
|  | 385 | static const struct led_flash_ops as3645a_led_flash_ops = { | 
|  | 386 | .flash_brightness_set = as3645a_set_flash_brightness, | 
|  | 387 | .timeout_set = as3645a_set_flash_timeout, | 
|  | 388 | .strobe_set = as3645a_set_strobe, | 
|  | 389 | .fault_get = as3645a_get_fault, | 
|  | 390 | }; | 
|  | 391 |  | 
|  | 392 | static int as3645a_setup(struct as3645a *flash) | 
|  | 393 | { | 
|  | 394 | struct device *dev = &flash->client->dev; | 
|  | 395 | u32 fault = 0; | 
|  | 396 | int rval; | 
|  | 397 |  | 
|  | 398 | /* clear errors */ | 
|  | 399 | rval = as3645a_read(flash, AS_FAULT_INFO_REG); | 
|  | 400 | if (rval < 0) | 
|  | 401 | return rval; | 
|  | 402 |  | 
|  | 403 | dev_dbg(dev, "Fault info: %02x\n", rval); | 
|  | 404 |  | 
|  | 405 | rval = as3645a_set_current(flash); | 
|  | 406 | if (rval < 0) | 
|  | 407 | return rval; | 
|  | 408 |  | 
|  | 409 | rval = as3645a_set_timeout(flash); | 
|  | 410 | if (rval < 0) | 
|  | 411 | return rval; | 
|  | 412 |  | 
|  | 413 | rval = as3645a_set_control(flash, AS_MODE_INDICATOR, false); | 
|  | 414 | if (rval < 0) | 
|  | 415 | return rval; | 
|  | 416 |  | 
|  | 417 | /* read status */ | 
|  | 418 | rval = as3645a_get_fault(&flash->fled, &fault); | 
|  | 419 | if (rval < 0) | 
|  | 420 | return rval; | 
|  | 421 |  | 
|  | 422 | dev_dbg(dev, "AS_INDICATOR_AND_TIMER_REG: %02x\n", | 
|  | 423 | as3645a_read(flash, AS_INDICATOR_AND_TIMER_REG)); | 
|  | 424 | dev_dbg(dev, "AS_CURRENT_SET_REG: %02x\n", | 
|  | 425 | as3645a_read(flash, AS_CURRENT_SET_REG)); | 
|  | 426 | dev_dbg(dev, "AS_CONTROL_REG: %02x\n", | 
|  | 427 | as3645a_read(flash, AS_CONTROL_REG)); | 
|  | 428 |  | 
|  | 429 | return rval & ~AS_FAULT_INFO_LED_AMOUNT ? -EIO : 0; | 
|  | 430 | } | 
|  | 431 |  | 
|  | 432 | static int as3645a_detect(struct as3645a *flash) | 
|  | 433 | { | 
|  | 434 | struct device *dev = &flash->client->dev; | 
|  | 435 | int rval, man, model, rfu, version; | 
|  | 436 | const char *vendor; | 
|  | 437 |  | 
|  | 438 | rval = as3645a_read(flash, AS_DESIGN_INFO_REG); | 
|  | 439 | if (rval < 0) { | 
|  | 440 | dev_err(dev, "can't read design info reg\n"); | 
|  | 441 | return rval; | 
|  | 442 | } | 
|  | 443 |  | 
|  | 444 | man = AS_DESIGN_INFO_FACTORY(rval); | 
|  | 445 | model = AS_DESIGN_INFO_MODEL(rval); | 
|  | 446 |  | 
|  | 447 | rval = as3645a_read(flash, AS_VERSION_CONTROL_REG); | 
|  | 448 | if (rval < 0) { | 
|  | 449 | dev_err(dev, "can't read version control reg\n"); | 
|  | 450 | return rval; | 
|  | 451 | } | 
|  | 452 |  | 
|  | 453 | rfu = AS_VERSION_CONTROL_RFU(rval); | 
|  | 454 | version = AS_VERSION_CONTROL_VERSION(rval); | 
|  | 455 |  | 
|  | 456 | /* Verify the chip model and version. */ | 
|  | 457 | if (model != 0x01 || rfu != 0x00) { | 
|  | 458 | dev_err(dev, "AS3645A not detected " | 
|  | 459 | "(model %d rfu %d)\n", model, rfu); | 
|  | 460 | return -ENODEV; | 
|  | 461 | } | 
|  | 462 |  | 
|  | 463 | switch (man) { | 
|  | 464 | case 1: | 
|  | 465 | vendor = "AMS, Austria Micro Systems"; | 
|  | 466 | break; | 
|  | 467 | case 2: | 
|  | 468 | vendor = "ADI, Analog Devices Inc."; | 
|  | 469 | break; | 
|  | 470 | case 3: | 
|  | 471 | vendor = "NSC, National Semiconductor"; | 
|  | 472 | break; | 
|  | 473 | case 4: | 
|  | 474 | vendor = "NXP"; | 
|  | 475 | break; | 
|  | 476 | case 5: | 
|  | 477 | vendor = "TI, Texas Instrument"; | 
|  | 478 | break; | 
|  | 479 | default: | 
|  | 480 | vendor = "Unknown"; | 
|  | 481 | } | 
|  | 482 |  | 
|  | 483 | dev_info(dev, "Chip vendor: %s (%d) Version: %d\n", vendor, | 
|  | 484 | man, version); | 
|  | 485 |  | 
|  | 486 | rval = as3645a_write(flash, AS_PASSWORD_REG, AS_PASSWORD_UNLOCK_VALUE); | 
|  | 487 | if (rval < 0) | 
|  | 488 | return rval; | 
|  | 489 |  | 
|  | 490 | return as3645a_write(flash, AS_BOOST_REG, AS_BOOST_CURRENT_DISABLE); | 
|  | 491 | } | 
|  | 492 |  | 
|  | 493 | static int as3645a_parse_node(struct as3645a *flash, | 
|  | 494 | struct as3645a_names *names, | 
|  | 495 | struct device_node *node) | 
|  | 496 | { | 
|  | 497 | struct as3645a_config *cfg = &flash->cfg; | 
|  | 498 | struct device_node *child; | 
|  | 499 | const char *name; | 
|  | 500 | int rval; | 
|  | 501 |  | 
|  | 502 | for_each_child_of_node(node, child) { | 
|  | 503 | u32 id = 0; | 
|  | 504 |  | 
|  | 505 | of_property_read_u32(child, "reg", &id); | 
|  | 506 |  | 
|  | 507 | switch (id) { | 
|  | 508 | case AS_LED_FLASH: | 
|  | 509 | flash->flash_node = of_node_get(child); | 
|  | 510 | break; | 
|  | 511 | case AS_LED_INDICATOR: | 
|  | 512 | flash->indicator_node = of_node_get(child); | 
|  | 513 | break; | 
|  | 514 | default: | 
|  | 515 | dev_warn(&flash->client->dev, | 
|  | 516 | "unknown LED %u encountered, ignoring\n", id); | 
|  | 517 | break; | 
|  | 518 | } | 
|  | 519 | } | 
|  | 520 |  | 
|  | 521 | if (!flash->flash_node) { | 
|  | 522 | dev_err(&flash->client->dev, "can't find flash node\n"); | 
|  | 523 | return -ENODEV; | 
|  | 524 | } | 
|  | 525 |  | 
|  | 526 | rval = of_property_read_string(flash->flash_node, "label", &name); | 
|  | 527 | if (!rval) | 
|  | 528 | strlcpy(names->flash, name, sizeof(names->flash)); | 
|  | 529 | else | 
|  | 530 | snprintf(names->flash, sizeof(names->flash), | 
|  | 531 | "%s:flash", node->name); | 
|  | 532 |  | 
|  | 533 | rval = of_property_read_u32(flash->flash_node, "flash-timeout-us", | 
|  | 534 | &cfg->flash_timeout_us); | 
|  | 535 | if (rval < 0) { | 
|  | 536 | dev_err(&flash->client->dev, | 
|  | 537 | "can't read flash-timeout-us property for flash\n"); | 
|  | 538 | goto out_err; | 
|  | 539 | } | 
|  | 540 |  | 
|  | 541 | rval = of_property_read_u32(flash->flash_node, "flash-max-microamp", | 
|  | 542 | &cfg->flash_max_ua); | 
|  | 543 | if (rval < 0) { | 
|  | 544 | dev_err(&flash->client->dev, | 
|  | 545 | "can't read flash-max-microamp property for flash\n"); | 
|  | 546 | goto out_err; | 
|  | 547 | } | 
|  | 548 |  | 
|  | 549 | rval = of_property_read_u32(flash->flash_node, "led-max-microamp", | 
|  | 550 | &cfg->assist_max_ua); | 
|  | 551 | if (rval < 0) { | 
|  | 552 | dev_err(&flash->client->dev, | 
|  | 553 | "can't read led-max-microamp property for flash\n"); | 
|  | 554 | goto out_err; | 
|  | 555 | } | 
|  | 556 |  | 
|  | 557 | of_property_read_u32(flash->flash_node, "voltage-reference", | 
|  | 558 | &cfg->voltage_reference); | 
|  | 559 |  | 
|  | 560 | of_property_read_u32(flash->flash_node, "ams,input-max-microamp", | 
|  | 561 | &cfg->peak); | 
|  | 562 | cfg->peak = AS_PEAK_mA_TO_REG(cfg->peak); | 
|  | 563 |  | 
|  | 564 | if (!flash->indicator_node) { | 
|  | 565 | dev_warn(&flash->client->dev, | 
|  | 566 | "can't find indicator node\n"); | 
|  | 567 | goto out_err; | 
|  | 568 | } | 
|  | 569 |  | 
|  | 570 | rval = of_property_read_string(flash->indicator_node, "label", &name); | 
|  | 571 | if (!rval) | 
|  | 572 | strlcpy(names->indicator, name, sizeof(names->indicator)); | 
|  | 573 | else | 
|  | 574 | snprintf(names->indicator, sizeof(names->indicator), | 
|  | 575 | "%s:indicator", node->name); | 
|  | 576 |  | 
|  | 577 | rval = of_property_read_u32(flash->indicator_node, "led-max-microamp", | 
|  | 578 | &cfg->indicator_max_ua); | 
|  | 579 | if (rval < 0) { | 
|  | 580 | dev_err(&flash->client->dev, | 
|  | 581 | "can't read led-max-microamp property for indicator\n"); | 
|  | 582 | goto out_err; | 
|  | 583 | } | 
|  | 584 |  | 
|  | 585 | return 0; | 
|  | 586 |  | 
|  | 587 | out_err: | 
|  | 588 | of_node_put(flash->flash_node); | 
|  | 589 | of_node_put(flash->indicator_node); | 
|  | 590 |  | 
|  | 591 | return rval; | 
|  | 592 | } | 
|  | 593 |  | 
|  | 594 | static int as3645a_led_class_setup(struct as3645a *flash, | 
|  | 595 | struct as3645a_names *names) | 
|  | 596 | { | 
|  | 597 | struct led_classdev *fled_cdev = &flash->fled.led_cdev; | 
|  | 598 | struct led_classdev *iled_cdev = &flash->iled_cdev; | 
|  | 599 | struct led_flash_setting *cfg; | 
|  | 600 | int rval; | 
|  | 601 |  | 
|  | 602 | iled_cdev->name = names->indicator; | 
|  | 603 | iled_cdev->brightness_set_blocking = as3645a_set_indicator_brightness; | 
|  | 604 | iled_cdev->max_brightness = | 
|  | 605 | flash->cfg.indicator_max_ua / AS_INDICATOR_INTENSITY_STEP; | 
|  | 606 | iled_cdev->flags = LED_CORE_SUSPENDRESUME; | 
|  | 607 |  | 
|  | 608 | rval = led_classdev_register(&flash->client->dev, iled_cdev); | 
|  | 609 | if (rval < 0) | 
|  | 610 | return rval; | 
|  | 611 |  | 
|  | 612 | cfg = &flash->fled.brightness; | 
|  | 613 | cfg->min = AS_FLASH_INTENSITY_MIN; | 
|  | 614 | cfg->max = flash->cfg.flash_max_ua; | 
|  | 615 | cfg->step = AS_FLASH_INTENSITY_STEP; | 
|  | 616 | cfg->val = flash->cfg.flash_max_ua; | 
|  | 617 |  | 
|  | 618 | cfg = &flash->fled.timeout; | 
|  | 619 | cfg->min = AS_FLASH_TIMEOUT_MIN; | 
|  | 620 | cfg->max = flash->cfg.flash_timeout_us; | 
|  | 621 | cfg->step = AS_FLASH_TIMEOUT_STEP; | 
|  | 622 | cfg->val = flash->cfg.flash_timeout_us; | 
|  | 623 |  | 
|  | 624 | flash->fled.ops = &as3645a_led_flash_ops; | 
|  | 625 |  | 
|  | 626 | fled_cdev->name = names->flash; | 
|  | 627 | fled_cdev->brightness_set_blocking = as3645a_set_assist_brightness; | 
|  | 628 | /* Value 0 is off in LED class. */ | 
|  | 629 | fled_cdev->max_brightness = | 
|  | 630 | as3645a_current_to_reg(flash, false, | 
|  | 631 | flash->cfg.assist_max_ua) + 1; | 
|  | 632 | fled_cdev->flags = LED_DEV_CAP_FLASH | LED_CORE_SUSPENDRESUME; | 
|  | 633 |  | 
|  | 634 | rval = led_classdev_flash_register(&flash->client->dev, &flash->fled); | 
|  | 635 | if (rval) { | 
|  | 636 | led_classdev_unregister(iled_cdev); | 
|  | 637 | dev_err(&flash->client->dev, | 
|  | 638 | "led_classdev_flash_register() failed, error %d\n", | 
|  | 639 | rval); | 
|  | 640 | } | 
|  | 641 |  | 
|  | 642 | return rval; | 
|  | 643 | } | 
|  | 644 |  | 
|  | 645 | static int as3645a_v4l2_setup(struct as3645a *flash) | 
|  | 646 | { | 
|  | 647 | struct led_classdev_flash *fled = &flash->fled; | 
|  | 648 | struct led_classdev *led = &fled->led_cdev; | 
|  | 649 | struct v4l2_flash_config cfg = { | 
|  | 650 | .intensity = { | 
|  | 651 | .min = AS_TORCH_INTENSITY_MIN, | 
|  | 652 | .max = flash->cfg.assist_max_ua, | 
|  | 653 | .step = AS_TORCH_INTENSITY_STEP, | 
|  | 654 | .val = flash->cfg.assist_max_ua, | 
|  | 655 | }, | 
|  | 656 | }; | 
|  | 657 | struct v4l2_flash_config cfgind = { | 
|  | 658 | .intensity = { | 
|  | 659 | .min = AS_INDICATOR_INTENSITY_MIN, | 
|  | 660 | .max = flash->cfg.indicator_max_ua, | 
|  | 661 | .step = AS_INDICATOR_INTENSITY_STEP, | 
|  | 662 | .val = flash->cfg.indicator_max_ua, | 
|  | 663 | }, | 
|  | 664 | }; | 
|  | 665 |  | 
|  | 666 | strlcpy(cfg.dev_name, led->name, sizeof(cfg.dev_name)); | 
|  | 667 | strlcpy(cfgind.dev_name, flash->iled_cdev.name, sizeof(cfg.dev_name)); | 
|  | 668 |  | 
|  | 669 | flash->vf = v4l2_flash_init( | 
|  | 670 | &flash->client->dev, of_fwnode_handle(flash->flash_node), | 
|  | 671 | &flash->fled, NULL, &cfg); | 
|  | 672 | if (IS_ERR(flash->vf)) | 
|  | 673 | return PTR_ERR(flash->vf); | 
|  | 674 |  | 
|  | 675 | flash->vfind = v4l2_flash_indicator_init( | 
|  | 676 | &flash->client->dev, of_fwnode_handle(flash->indicator_node), | 
|  | 677 | &flash->iled_cdev, &cfgind); | 
|  | 678 | if (IS_ERR(flash->vfind)) { | 
|  | 679 | v4l2_flash_release(flash->vf); | 
|  | 680 | return PTR_ERR(flash->vfind); | 
|  | 681 | } | 
|  | 682 |  | 
|  | 683 | return 0; | 
|  | 684 | } | 
|  | 685 |  | 
|  | 686 | static int as3645a_probe(struct i2c_client *client) | 
|  | 687 | { | 
|  | 688 | struct as3645a_names names; | 
|  | 689 | struct as3645a *flash; | 
|  | 690 | int rval; | 
|  | 691 |  | 
|  | 692 | if (client->dev.of_node == NULL) | 
|  | 693 | return -ENODEV; | 
|  | 694 |  | 
|  | 695 | flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL); | 
|  | 696 | if (flash == NULL) | 
|  | 697 | return -ENOMEM; | 
|  | 698 |  | 
|  | 699 | flash->client = client; | 
|  | 700 |  | 
|  | 701 | rval = as3645a_parse_node(flash, &names, client->dev.of_node); | 
|  | 702 | if (rval < 0) | 
|  | 703 | return rval; | 
|  | 704 |  | 
|  | 705 | rval = as3645a_detect(flash); | 
|  | 706 | if (rval < 0) | 
|  | 707 | goto out_put_nodes; | 
|  | 708 |  | 
|  | 709 | mutex_init(&flash->mutex); | 
|  | 710 | i2c_set_clientdata(client, flash); | 
|  | 711 |  | 
|  | 712 | rval = as3645a_setup(flash); | 
|  | 713 | if (rval) | 
|  | 714 | goto out_mutex_destroy; | 
|  | 715 |  | 
|  | 716 | rval = as3645a_led_class_setup(flash, &names); | 
|  | 717 | if (rval) | 
|  | 718 | goto out_mutex_destroy; | 
|  | 719 |  | 
|  | 720 | rval = as3645a_v4l2_setup(flash); | 
|  | 721 | if (rval) | 
|  | 722 | goto out_led_classdev_flash_unregister; | 
|  | 723 |  | 
|  | 724 | return 0; | 
|  | 725 |  | 
|  | 726 | out_led_classdev_flash_unregister: | 
|  | 727 | led_classdev_flash_unregister(&flash->fled); | 
|  | 728 |  | 
|  | 729 | out_mutex_destroy: | 
|  | 730 | mutex_destroy(&flash->mutex); | 
|  | 731 |  | 
|  | 732 | out_put_nodes: | 
|  | 733 | of_node_put(flash->flash_node); | 
|  | 734 | of_node_put(flash->indicator_node); | 
|  | 735 |  | 
|  | 736 | return rval; | 
|  | 737 | } | 
|  | 738 |  | 
|  | 739 | static int as3645a_remove(struct i2c_client *client) | 
|  | 740 | { | 
|  | 741 | struct as3645a *flash = i2c_get_clientdata(client); | 
|  | 742 |  | 
|  | 743 | as3645a_set_control(flash, AS_MODE_EXT_TORCH, false); | 
|  | 744 |  | 
|  | 745 | v4l2_flash_release(flash->vf); | 
|  | 746 | v4l2_flash_release(flash->vfind); | 
|  | 747 |  | 
|  | 748 | led_classdev_flash_unregister(&flash->fled); | 
|  | 749 | led_classdev_unregister(&flash->iled_cdev); | 
|  | 750 |  | 
|  | 751 | mutex_destroy(&flash->mutex); | 
|  | 752 |  | 
|  | 753 | of_node_put(flash->flash_node); | 
|  | 754 | of_node_put(flash->indicator_node); | 
|  | 755 |  | 
|  | 756 | return 0; | 
|  | 757 | } | 
|  | 758 |  | 
|  | 759 | static const struct i2c_device_id as3645a_id_table[] = { | 
|  | 760 | { AS_NAME, 0 }, | 
|  | 761 | { }, | 
|  | 762 | }; | 
|  | 763 | MODULE_DEVICE_TABLE(i2c, as3645a_id_table); | 
|  | 764 |  | 
|  | 765 | static const struct of_device_id as3645a_of_table[] = { | 
|  | 766 | { .compatible = "ams,as3645a" }, | 
|  | 767 | { }, | 
|  | 768 | }; | 
|  | 769 | MODULE_DEVICE_TABLE(of, as3645a_of_table); | 
|  | 770 |  | 
|  | 771 | static struct i2c_driver as3645a_i2c_driver = { | 
|  | 772 | .driver	= { | 
|  | 773 | .of_match_table = as3645a_of_table, | 
|  | 774 | .name = AS_NAME, | 
|  | 775 | }, | 
|  | 776 | .probe_new	= as3645a_probe, | 
|  | 777 | .remove	= as3645a_remove, | 
|  | 778 | .id_table = as3645a_id_table, | 
|  | 779 | }; | 
|  | 780 |  | 
|  | 781 | module_i2c_driver(as3645a_i2c_driver); | 
|  | 782 |  | 
|  | 783 | MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); | 
|  | 784 | MODULE_AUTHOR("Sakari Ailus <sakari.ailus@iki.fi>"); | 
|  | 785 | MODULE_DESCRIPTION("LED flash driver for AS3645A, LM3555 and their clones"); | 
|  | 786 | MODULE_LICENSE("GPL v2"); |