| rjw | 1f88458 | 2022-01-06 17:20:42 +0800 | [diff] [blame] | 1 | /* | 
|  | 2 | * sst25l.c | 
|  | 3 | * | 
|  | 4 | * Driver for SST25L SPI Flash chips | 
|  | 5 | * | 
|  | 6 | * Copyright © 2009 Bluewater Systems Ltd | 
|  | 7 | * Author: Andre Renaud <andre@bluewatersys.com> | 
|  | 8 | * Author: Ryan Mallon | 
|  | 9 | * | 
|  | 10 | * Based on m25p80.c | 
|  | 11 | * | 
|  | 12 | * This code is free software; you can redistribute it and/or modify | 
|  | 13 | * it under the terms of the GNU General Public License version 2 as | 
|  | 14 | * published by the Free Software Foundation. | 
|  | 15 | * | 
|  | 16 | */ | 
|  | 17 |  | 
|  | 18 | #include <linux/module.h> | 
|  | 19 | #include <linux/device.h> | 
|  | 20 | #include <linux/mutex.h> | 
|  | 21 | #include <linux/interrupt.h> | 
|  | 22 | #include <linux/slab.h> | 
|  | 23 | #include <linux/sched.h> | 
|  | 24 |  | 
|  | 25 | #include <linux/mtd/mtd.h> | 
|  | 26 | #include <linux/mtd/partitions.h> | 
|  | 27 |  | 
|  | 28 | #include <linux/spi/spi.h> | 
|  | 29 | #include <linux/spi/flash.h> | 
|  | 30 |  | 
|  | 31 | /* Erases can take up to 3 seconds! */ | 
|  | 32 | #define MAX_READY_WAIT_JIFFIES	msecs_to_jiffies(3000) | 
|  | 33 |  | 
|  | 34 | #define SST25L_CMD_WRSR		0x01	/* Write status register */ | 
|  | 35 | #define SST25L_CMD_WRDI		0x04	/* Write disable */ | 
|  | 36 | #define SST25L_CMD_RDSR		0x05	/* Read status register */ | 
|  | 37 | #define SST25L_CMD_WREN		0x06	/* Write enable */ | 
|  | 38 | #define SST25L_CMD_READ		0x03	/* High speed read */ | 
|  | 39 |  | 
|  | 40 | #define SST25L_CMD_EWSR		0x50	/* Enable write status register */ | 
|  | 41 | #define SST25L_CMD_SECTOR_ERASE	0x20	/* Erase sector */ | 
|  | 42 | #define SST25L_CMD_READ_ID	0x90	/* Read device ID */ | 
|  | 43 | #define SST25L_CMD_AAI_PROGRAM	0xaf	/* Auto address increment */ | 
|  | 44 |  | 
|  | 45 | #define SST25L_STATUS_BUSY	(1 << 0)	/* Chip is busy */ | 
|  | 46 | #define SST25L_STATUS_WREN	(1 << 1)	/* Write enabled */ | 
|  | 47 | #define SST25L_STATUS_BP0	(1 << 2)	/* Block protection 0 */ | 
|  | 48 | #define SST25L_STATUS_BP1	(1 << 3)	/* Block protection 1 */ | 
|  | 49 |  | 
|  | 50 | struct sst25l_flash { | 
|  | 51 | struct spi_device	*spi; | 
|  | 52 | struct mutex		lock; | 
|  | 53 | struct mtd_info		mtd; | 
|  | 54 | }; | 
|  | 55 |  | 
|  | 56 | struct flash_info { | 
|  | 57 | const char		*name; | 
|  | 58 | uint16_t		device_id; | 
|  | 59 | unsigned		page_size; | 
|  | 60 | unsigned		nr_pages; | 
|  | 61 | unsigned		erase_size; | 
|  | 62 | }; | 
|  | 63 |  | 
|  | 64 | #define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd) | 
|  | 65 |  | 
|  | 66 | static struct flash_info sst25l_flash_info[] = { | 
|  | 67 | {"sst25lf020a", 0xbf43, 256, 1024, 4096}, | 
|  | 68 | {"sst25lf040a",	0xbf44,	256, 2048, 4096}, | 
|  | 69 | }; | 
|  | 70 |  | 
|  | 71 | static int sst25l_status(struct sst25l_flash *flash, int *status) | 
|  | 72 | { | 
|  | 73 | struct spi_message m; | 
|  | 74 | struct spi_transfer t; | 
|  | 75 | unsigned char cmd_resp[2]; | 
|  | 76 | int err; | 
|  | 77 |  | 
|  | 78 | spi_message_init(&m); | 
|  | 79 | memset(&t, 0, sizeof(struct spi_transfer)); | 
|  | 80 |  | 
|  | 81 | cmd_resp[0] = SST25L_CMD_RDSR; | 
|  | 82 | cmd_resp[1] = 0xff; | 
|  | 83 | t.tx_buf = cmd_resp; | 
|  | 84 | t.rx_buf = cmd_resp; | 
|  | 85 | t.len = sizeof(cmd_resp); | 
|  | 86 | spi_message_add_tail(&t, &m); | 
|  | 87 | err = spi_sync(flash->spi, &m); | 
|  | 88 | if (err < 0) | 
|  | 89 | return err; | 
|  | 90 |  | 
|  | 91 | *status = cmd_resp[1]; | 
|  | 92 | return 0; | 
|  | 93 | } | 
|  | 94 |  | 
|  | 95 | static int sst25l_write_enable(struct sst25l_flash *flash, int enable) | 
|  | 96 | { | 
|  | 97 | unsigned char command[2]; | 
|  | 98 | int status, err; | 
|  | 99 |  | 
|  | 100 | command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI; | 
|  | 101 | err = spi_write(flash->spi, command, 1); | 
|  | 102 | if (err) | 
|  | 103 | return err; | 
|  | 104 |  | 
|  | 105 | command[0] = SST25L_CMD_EWSR; | 
|  | 106 | err = spi_write(flash->spi, command, 1); | 
|  | 107 | if (err) | 
|  | 108 | return err; | 
|  | 109 |  | 
|  | 110 | command[0] = SST25L_CMD_WRSR; | 
|  | 111 | command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1; | 
|  | 112 | err = spi_write(flash->spi, command, 2); | 
|  | 113 | if (err) | 
|  | 114 | return err; | 
|  | 115 |  | 
|  | 116 | if (enable) { | 
|  | 117 | err = sst25l_status(flash, &status); | 
|  | 118 | if (err) | 
|  | 119 | return err; | 
|  | 120 | if (!(status & SST25L_STATUS_WREN)) | 
|  | 121 | return -EROFS; | 
|  | 122 | } | 
|  | 123 |  | 
|  | 124 | return 0; | 
|  | 125 | } | 
|  | 126 |  | 
|  | 127 | static int sst25l_wait_till_ready(struct sst25l_flash *flash) | 
|  | 128 | { | 
|  | 129 | unsigned long deadline; | 
|  | 130 | int status, err; | 
|  | 131 |  | 
|  | 132 | deadline = jiffies + MAX_READY_WAIT_JIFFIES; | 
|  | 133 | do { | 
|  | 134 | err = sst25l_status(flash, &status); | 
|  | 135 | if (err) | 
|  | 136 | return err; | 
|  | 137 | if (!(status & SST25L_STATUS_BUSY)) | 
|  | 138 | return 0; | 
|  | 139 |  | 
|  | 140 | cond_resched(); | 
|  | 141 | } while (!time_after_eq(jiffies, deadline)); | 
|  | 142 |  | 
|  | 143 | return -ETIMEDOUT; | 
|  | 144 | } | 
|  | 145 |  | 
|  | 146 | static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset) | 
|  | 147 | { | 
|  | 148 | unsigned char command[4]; | 
|  | 149 | int err; | 
|  | 150 |  | 
|  | 151 | err = sst25l_write_enable(flash, 1); | 
|  | 152 | if (err) | 
|  | 153 | return err; | 
|  | 154 |  | 
|  | 155 | command[0] = SST25L_CMD_SECTOR_ERASE; | 
|  | 156 | command[1] = offset >> 16; | 
|  | 157 | command[2] = offset >> 8; | 
|  | 158 | command[3] = offset; | 
|  | 159 | err = spi_write(flash->spi, command, 4); | 
|  | 160 | if (err) | 
|  | 161 | return err; | 
|  | 162 |  | 
|  | 163 | err = sst25l_wait_till_ready(flash); | 
|  | 164 | if (err) | 
|  | 165 | return err; | 
|  | 166 |  | 
|  | 167 | return sst25l_write_enable(flash, 0); | 
|  | 168 | } | 
|  | 169 |  | 
|  | 170 | static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr) | 
|  | 171 | { | 
|  | 172 | struct sst25l_flash *flash = to_sst25l_flash(mtd); | 
|  | 173 | uint32_t addr, end; | 
|  | 174 | int err; | 
|  | 175 |  | 
|  | 176 | /* Sanity checks */ | 
|  | 177 | if ((uint32_t)instr->len % mtd->erasesize) | 
|  | 178 | return -EINVAL; | 
|  | 179 |  | 
|  | 180 | if ((uint32_t)instr->addr % mtd->erasesize) | 
|  | 181 | return -EINVAL; | 
|  | 182 |  | 
|  | 183 | addr = instr->addr; | 
|  | 184 | end = addr + instr->len; | 
|  | 185 |  | 
|  | 186 | mutex_lock(&flash->lock); | 
|  | 187 |  | 
|  | 188 | err = sst25l_wait_till_ready(flash); | 
|  | 189 | if (err) { | 
|  | 190 | mutex_unlock(&flash->lock); | 
|  | 191 | return err; | 
|  | 192 | } | 
|  | 193 |  | 
|  | 194 | while (addr < end) { | 
|  | 195 | err = sst25l_erase_sector(flash, addr); | 
|  | 196 | if (err) { | 
|  | 197 | mutex_unlock(&flash->lock); | 
|  | 198 | instr->state = MTD_ERASE_FAILED; | 
|  | 199 | dev_err(&flash->spi->dev, "Erase failed\n"); | 
|  | 200 | return err; | 
|  | 201 | } | 
|  | 202 |  | 
|  | 203 | addr += mtd->erasesize; | 
|  | 204 | } | 
|  | 205 |  | 
|  | 206 | mutex_unlock(&flash->lock); | 
|  | 207 |  | 
|  | 208 | instr->state = MTD_ERASE_DONE; | 
|  | 209 | mtd_erase_callback(instr); | 
|  | 210 | return 0; | 
|  | 211 | } | 
|  | 212 |  | 
|  | 213 | static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len, | 
|  | 214 | size_t *retlen, unsigned char *buf) | 
|  | 215 | { | 
|  | 216 | struct sst25l_flash *flash = to_sst25l_flash(mtd); | 
|  | 217 | struct spi_transfer transfer[2]; | 
|  | 218 | struct spi_message message; | 
|  | 219 | unsigned char command[4]; | 
|  | 220 | int ret; | 
|  | 221 |  | 
|  | 222 | spi_message_init(&message); | 
|  | 223 | memset(&transfer, 0, sizeof(transfer)); | 
|  | 224 |  | 
|  | 225 | command[0] = SST25L_CMD_READ; | 
|  | 226 | command[1] = from >> 16; | 
|  | 227 | command[2] = from >> 8; | 
|  | 228 | command[3] = from; | 
|  | 229 |  | 
|  | 230 | transfer[0].tx_buf = command; | 
|  | 231 | transfer[0].len = sizeof(command); | 
|  | 232 | spi_message_add_tail(&transfer[0], &message); | 
|  | 233 |  | 
|  | 234 | transfer[1].rx_buf = buf; | 
|  | 235 | transfer[1].len = len; | 
|  | 236 | spi_message_add_tail(&transfer[1], &message); | 
|  | 237 |  | 
|  | 238 | mutex_lock(&flash->lock); | 
|  | 239 |  | 
|  | 240 | /* Wait for previous write/erase to complete */ | 
|  | 241 | ret = sst25l_wait_till_ready(flash); | 
|  | 242 | if (ret) { | 
|  | 243 | mutex_unlock(&flash->lock); | 
|  | 244 | return ret; | 
|  | 245 | } | 
|  | 246 |  | 
|  | 247 | spi_sync(flash->spi, &message); | 
|  | 248 |  | 
|  | 249 | if (retlen && message.actual_length > sizeof(command)) | 
|  | 250 | *retlen += message.actual_length - sizeof(command); | 
|  | 251 |  | 
|  | 252 | mutex_unlock(&flash->lock); | 
|  | 253 | return 0; | 
|  | 254 | } | 
|  | 255 |  | 
|  | 256 | static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len, | 
|  | 257 | size_t *retlen, const unsigned char *buf) | 
|  | 258 | { | 
|  | 259 | struct sst25l_flash *flash = to_sst25l_flash(mtd); | 
|  | 260 | int i, j, ret, bytes, copied = 0; | 
|  | 261 | unsigned char command[5]; | 
|  | 262 |  | 
|  | 263 | if ((uint32_t)to % mtd->writesize) | 
|  | 264 | return -EINVAL; | 
|  | 265 |  | 
|  | 266 | mutex_lock(&flash->lock); | 
|  | 267 |  | 
|  | 268 | ret = sst25l_write_enable(flash, 1); | 
|  | 269 | if (ret) | 
|  | 270 | goto out; | 
|  | 271 |  | 
|  | 272 | for (i = 0; i < len; i += mtd->writesize) { | 
|  | 273 | ret = sst25l_wait_till_ready(flash); | 
|  | 274 | if (ret) | 
|  | 275 | goto out; | 
|  | 276 |  | 
|  | 277 | /* Write the first byte of the page */ | 
|  | 278 | command[0] = SST25L_CMD_AAI_PROGRAM; | 
|  | 279 | command[1] = (to + i) >> 16; | 
|  | 280 | command[2] = (to + i) >> 8; | 
|  | 281 | command[3] = (to + i); | 
|  | 282 | command[4] = buf[i]; | 
|  | 283 | ret = spi_write(flash->spi, command, 5); | 
|  | 284 | if (ret < 0) | 
|  | 285 | goto out; | 
|  | 286 | copied++; | 
|  | 287 |  | 
|  | 288 | /* | 
|  | 289 | * Write the remaining bytes using auto address | 
|  | 290 | * increment mode | 
|  | 291 | */ | 
|  | 292 | bytes = min_t(uint32_t, mtd->writesize, len - i); | 
|  | 293 | for (j = 1; j < bytes; j++, copied++) { | 
|  | 294 | ret = sst25l_wait_till_ready(flash); | 
|  | 295 | if (ret) | 
|  | 296 | goto out; | 
|  | 297 |  | 
|  | 298 | command[1] = buf[i + j]; | 
|  | 299 | ret = spi_write(flash->spi, command, 2); | 
|  | 300 | if (ret) | 
|  | 301 | goto out; | 
|  | 302 | } | 
|  | 303 | } | 
|  | 304 |  | 
|  | 305 | out: | 
|  | 306 | ret = sst25l_write_enable(flash, 0); | 
|  | 307 |  | 
|  | 308 | if (retlen) | 
|  | 309 | *retlen = copied; | 
|  | 310 |  | 
|  | 311 | mutex_unlock(&flash->lock); | 
|  | 312 | return ret; | 
|  | 313 | } | 
|  | 314 |  | 
|  | 315 | static struct flash_info *sst25l_match_device(struct spi_device *spi) | 
|  | 316 | { | 
|  | 317 | struct flash_info *flash_info = NULL; | 
|  | 318 | struct spi_message m; | 
|  | 319 | struct spi_transfer t; | 
|  | 320 | unsigned char cmd_resp[6]; | 
|  | 321 | int i, err; | 
|  | 322 | uint16_t id; | 
|  | 323 |  | 
|  | 324 | spi_message_init(&m); | 
|  | 325 | memset(&t, 0, sizeof(struct spi_transfer)); | 
|  | 326 |  | 
|  | 327 | cmd_resp[0] = SST25L_CMD_READ_ID; | 
|  | 328 | cmd_resp[1] = 0; | 
|  | 329 | cmd_resp[2] = 0; | 
|  | 330 | cmd_resp[3] = 0; | 
|  | 331 | cmd_resp[4] = 0xff; | 
|  | 332 | cmd_resp[5] = 0xff; | 
|  | 333 | t.tx_buf = cmd_resp; | 
|  | 334 | t.rx_buf = cmd_resp; | 
|  | 335 | t.len = sizeof(cmd_resp); | 
|  | 336 | spi_message_add_tail(&t, &m); | 
|  | 337 | err = spi_sync(spi, &m); | 
|  | 338 | if (err < 0) { | 
|  | 339 | dev_err(&spi->dev, "error reading device id\n"); | 
|  | 340 | return NULL; | 
|  | 341 | } | 
|  | 342 |  | 
|  | 343 | id = (cmd_resp[4] << 8) | cmd_resp[5]; | 
|  | 344 |  | 
|  | 345 | for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++) | 
|  | 346 | if (sst25l_flash_info[i].device_id == id) | 
|  | 347 | flash_info = &sst25l_flash_info[i]; | 
|  | 348 |  | 
|  | 349 | if (!flash_info) | 
|  | 350 | dev_err(&spi->dev, "unknown id %.4x\n", id); | 
|  | 351 |  | 
|  | 352 | return flash_info; | 
|  | 353 | } | 
|  | 354 |  | 
|  | 355 | static int sst25l_probe(struct spi_device *spi) | 
|  | 356 | { | 
|  | 357 | struct flash_info *flash_info; | 
|  | 358 | struct sst25l_flash *flash; | 
|  | 359 | struct flash_platform_data *data; | 
|  | 360 | int ret; | 
|  | 361 |  | 
|  | 362 | flash_info = sst25l_match_device(spi); | 
|  | 363 | if (!flash_info) | 
|  | 364 | return -ENODEV; | 
|  | 365 |  | 
|  | 366 | flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL); | 
|  | 367 | if (!flash) | 
|  | 368 | return -ENOMEM; | 
|  | 369 |  | 
|  | 370 | flash->spi = spi; | 
|  | 371 | mutex_init(&flash->lock); | 
|  | 372 | spi_set_drvdata(spi, flash); | 
|  | 373 |  | 
|  | 374 | data = dev_get_platdata(&spi->dev); | 
|  | 375 | if (data && data->name) | 
|  | 376 | flash->mtd.name = data->name; | 
|  | 377 |  | 
|  | 378 | flash->mtd.dev.parent   = &spi->dev; | 
|  | 379 | flash->mtd.type		= MTD_NORFLASH; | 
|  | 380 | flash->mtd.flags	= MTD_CAP_NORFLASH; | 
|  | 381 | flash->mtd.erasesize	= flash_info->erase_size; | 
|  | 382 | flash->mtd.writesize	= flash_info->page_size; | 
|  | 383 | flash->mtd.writebufsize	= flash_info->page_size; | 
|  | 384 | flash->mtd.size		= flash_info->page_size * flash_info->nr_pages; | 
|  | 385 | flash->mtd._erase	= sst25l_erase; | 
|  | 386 | flash->mtd._read		= sst25l_read; | 
|  | 387 | flash->mtd._write 	= sst25l_write; | 
|  | 388 |  | 
|  | 389 | dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name, | 
|  | 390 | (long long)flash->mtd.size >> 10); | 
|  | 391 |  | 
|  | 392 | pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) " | 
|  | 393 | ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n", | 
|  | 394 | flash->mtd.name, | 
|  | 395 | (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20), | 
|  | 396 | flash->mtd.erasesize, flash->mtd.erasesize / 1024, | 
|  | 397 | flash->mtd.numeraseregions); | 
|  | 398 |  | 
|  | 399 |  | 
|  | 400 | ret = mtd_device_parse_register(&flash->mtd, NULL, NULL, | 
|  | 401 | data ? data->parts : NULL, | 
|  | 402 | data ? data->nr_parts : 0); | 
|  | 403 | if (ret) | 
|  | 404 | return -ENODEV; | 
|  | 405 |  | 
|  | 406 | return 0; | 
|  | 407 | } | 
|  | 408 |  | 
|  | 409 | static int sst25l_remove(struct spi_device *spi) | 
|  | 410 | { | 
|  | 411 | struct sst25l_flash *flash = spi_get_drvdata(spi); | 
|  | 412 |  | 
|  | 413 | return mtd_device_unregister(&flash->mtd); | 
|  | 414 | } | 
|  | 415 |  | 
|  | 416 | static struct spi_driver sst25l_driver = { | 
|  | 417 | .driver = { | 
|  | 418 | .name	= "sst25l", | 
|  | 419 | }, | 
|  | 420 | .probe		= sst25l_probe, | 
|  | 421 | .remove		= sst25l_remove, | 
|  | 422 | }; | 
|  | 423 |  | 
|  | 424 | module_spi_driver(sst25l_driver); | 
|  | 425 |  | 
|  | 426 | MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips"); | 
|  | 427 | MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, " | 
|  | 428 | "Ryan Mallon"); | 
|  | 429 | MODULE_LICENSE("GPL"); |