|  | /* | 
|  | * Copyright (C) 2011 ST-Ericsson SA. | 
|  | * Copyright (C) 2009 Motorola, Inc. | 
|  | * | 
|  | * License Terms: GNU General Public License v2 | 
|  | * | 
|  | * Simple driver for National Semiconductor LM3530 Backlight driver chip | 
|  | * | 
|  | * Author: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> | 
|  | * based on leds-lm3530.c by Dan Murphy <D.Murphy@motorola.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/leds.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/led-lm3530.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  | #include <linux/module.h> | 
|  |  | 
|  | #define LM3530_LED_DEV "lcd-backlight" | 
|  | #define LM3530_NAME "lm3530-led" | 
|  |  | 
|  | #define LM3530_GEN_CONFIG		0x10 | 
|  | #define LM3530_ALS_CONFIG		0x20 | 
|  | #define LM3530_BRT_RAMP_RATE		0x30 | 
|  | #define LM3530_ALS_IMP_SELECT		0x41 | 
|  | #define LM3530_BRT_CTRL_REG		0xA0 | 
|  | #define LM3530_ALS_ZB0_REG		0x60 | 
|  | #define LM3530_ALS_ZB1_REG		0x61 | 
|  | #define LM3530_ALS_ZB2_REG		0x62 | 
|  | #define LM3530_ALS_ZB3_REG		0x63 | 
|  | #define LM3530_ALS_Z0T_REG		0x70 | 
|  | #define LM3530_ALS_Z1T_REG		0x71 | 
|  | #define LM3530_ALS_Z2T_REG		0x72 | 
|  | #define LM3530_ALS_Z3T_REG		0x73 | 
|  | #define LM3530_ALS_Z4T_REG		0x74 | 
|  | #define LM3530_REG_MAX			14 | 
|  |  | 
|  | /* General Control Register */ | 
|  | #define LM3530_EN_I2C_SHIFT		(0) | 
|  | #define LM3530_RAMP_LAW_SHIFT		(1) | 
|  | #define LM3530_MAX_CURR_SHIFT		(2) | 
|  | #define LM3530_EN_PWM_SHIFT		(5) | 
|  | #define LM3530_PWM_POL_SHIFT		(6) | 
|  | #define LM3530_EN_PWM_SIMPLE_SHIFT	(7) | 
|  |  | 
|  | #define LM3530_ENABLE_I2C		(1 << LM3530_EN_I2C_SHIFT) | 
|  | #define LM3530_ENABLE_PWM		(1 << LM3530_EN_PWM_SHIFT) | 
|  | #define LM3530_POL_LOW			(1 << LM3530_PWM_POL_SHIFT) | 
|  | #define LM3530_ENABLE_PWM_SIMPLE	(1 << LM3530_EN_PWM_SIMPLE_SHIFT) | 
|  |  | 
|  | /* ALS Config Register Options */ | 
|  | #define LM3530_ALS_AVG_TIME_SHIFT	(0) | 
|  | #define LM3530_EN_ALS_SHIFT		(3) | 
|  | #define LM3530_ALS_SEL_SHIFT		(5) | 
|  |  | 
|  | #define LM3530_ENABLE_ALS		(3 << LM3530_EN_ALS_SHIFT) | 
|  |  | 
|  | /* Brightness Ramp Rate Register */ | 
|  | #define LM3530_BRT_RAMP_FALL_SHIFT	(0) | 
|  | #define LM3530_BRT_RAMP_RISE_SHIFT	(3) | 
|  |  | 
|  | /* ALS Resistor Select */ | 
|  | #define LM3530_ALS1_IMP_SHIFT		(0) | 
|  | #define LM3530_ALS2_IMP_SHIFT		(4) | 
|  |  | 
|  | /* Zone Boundary Register defaults */ | 
|  | #define LM3530_ALS_ZB_MAX		(4) | 
|  | #define LM3530_ALS_WINDOW_mV		(1000) | 
|  | #define LM3530_ALS_OFFSET_mV		(4) | 
|  |  | 
|  | /* Zone Target Register defaults */ | 
|  | #define LM3530_DEF_ZT_0			(0x7F) | 
|  | #define LM3530_DEF_ZT_1			(0x66) | 
|  | #define LM3530_DEF_ZT_2			(0x4C) | 
|  | #define LM3530_DEF_ZT_3			(0x33) | 
|  | #define LM3530_DEF_ZT_4			(0x19) | 
|  |  | 
|  | /* 7 bits are used for the brightness : LM3530_BRT_CTRL_REG */ | 
|  | #define MAX_BRIGHTNESS			(127) | 
|  |  | 
|  | struct lm3530_mode_map { | 
|  | const char *mode; | 
|  | enum lm3530_mode mode_val; | 
|  | }; | 
|  |  | 
|  | static struct lm3530_mode_map mode_map[] = { | 
|  | { "man", LM3530_BL_MODE_MANUAL }, | 
|  | { "als", LM3530_BL_MODE_ALS }, | 
|  | { "pwm", LM3530_BL_MODE_PWM }, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * struct lm3530_data | 
|  | * @led_dev: led class device | 
|  | * @client: i2c client | 
|  | * @pdata: LM3530 platform data | 
|  | * @mode: mode of operation - manual, ALS, PWM | 
|  | * @regulator: regulator | 
|  | * @brighness: previous brightness value | 
|  | * @enable: regulator is enabled | 
|  | */ | 
|  | struct lm3530_data { | 
|  | struct led_classdev led_dev; | 
|  | struct i2c_client *client; | 
|  | struct lm3530_platform_data *pdata; | 
|  | enum lm3530_mode mode; | 
|  | struct regulator *regulator; | 
|  | enum led_brightness brightness; | 
|  | bool enable; | 
|  | }; | 
|  |  | 
|  | static const u8 lm3530_reg[LM3530_REG_MAX] = { | 
|  | LM3530_GEN_CONFIG, | 
|  | LM3530_ALS_CONFIG, | 
|  | LM3530_BRT_RAMP_RATE, | 
|  | LM3530_ALS_IMP_SELECT, | 
|  | LM3530_BRT_CTRL_REG, | 
|  | LM3530_ALS_ZB0_REG, | 
|  | LM3530_ALS_ZB1_REG, | 
|  | LM3530_ALS_ZB2_REG, | 
|  | LM3530_ALS_ZB3_REG, | 
|  | LM3530_ALS_Z0T_REG, | 
|  | LM3530_ALS_Z1T_REG, | 
|  | LM3530_ALS_Z2T_REG, | 
|  | LM3530_ALS_Z3T_REG, | 
|  | LM3530_ALS_Z4T_REG, | 
|  | }; | 
|  |  | 
|  | static int lm3530_get_mode_from_str(const char *str) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(mode_map); i++) | 
|  | if (sysfs_streq(str, mode_map[i].mode)) | 
|  | return mode_map[i].mode_val; | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static int lm3530_init_registers(struct lm3530_data *drvdata) | 
|  | { | 
|  | int ret = 0; | 
|  | int i; | 
|  | u8 gen_config; | 
|  | u8 als_config = 0; | 
|  | u8 brt_ramp; | 
|  | u8 als_imp_sel = 0; | 
|  | u8 brightness; | 
|  | u8 reg_val[LM3530_REG_MAX]; | 
|  | u8 zones[LM3530_ALS_ZB_MAX]; | 
|  | u32 als_vmin, als_vmax, als_vstep; | 
|  | struct lm3530_platform_data *pdata = drvdata->pdata; | 
|  | struct i2c_client *client = drvdata->client; | 
|  | struct lm3530_pwm_data *pwm = &pdata->pwm_data; | 
|  |  | 
|  | gen_config = (pdata->brt_ramp_law << LM3530_RAMP_LAW_SHIFT) | | 
|  | ((pdata->max_current & 7) << LM3530_MAX_CURR_SHIFT); | 
|  |  | 
|  | switch (drvdata->mode) { | 
|  | case LM3530_BL_MODE_MANUAL: | 
|  | case LM3530_BL_MODE_ALS: | 
|  | gen_config |= LM3530_ENABLE_I2C; | 
|  | break; | 
|  | case LM3530_BL_MODE_PWM: | 
|  | gen_config |= LM3530_ENABLE_PWM | LM3530_ENABLE_PWM_SIMPLE | | 
|  | (pdata->pwm_pol_hi << LM3530_PWM_POL_SHIFT); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (drvdata->mode == LM3530_BL_MODE_ALS) { | 
|  | if (pdata->als_vmax == 0) { | 
|  | pdata->als_vmin = 0; | 
|  | pdata->als_vmax = LM3530_ALS_WINDOW_mV; | 
|  | } | 
|  |  | 
|  | als_vmin = pdata->als_vmin; | 
|  | als_vmax = pdata->als_vmax; | 
|  |  | 
|  | if ((als_vmax - als_vmin) > LM3530_ALS_WINDOW_mV) | 
|  | pdata->als_vmax = als_vmax = | 
|  | als_vmin + LM3530_ALS_WINDOW_mV; | 
|  |  | 
|  | /* n zone boundary makes n+1 zones */ | 
|  | als_vstep = (als_vmax - als_vmin) / (LM3530_ALS_ZB_MAX + 1); | 
|  |  | 
|  | for (i = 0; i < LM3530_ALS_ZB_MAX; i++) | 
|  | zones[i] = (((als_vmin + LM3530_ALS_OFFSET_mV) + | 
|  | als_vstep + (i * als_vstep)) * LED_FULL) | 
|  | / 1000; | 
|  |  | 
|  | als_config = | 
|  | (pdata->als_avrg_time << LM3530_ALS_AVG_TIME_SHIFT) | | 
|  | (LM3530_ENABLE_ALS) | | 
|  | (pdata->als_input_mode << LM3530_ALS_SEL_SHIFT); | 
|  |  | 
|  | als_imp_sel = | 
|  | (pdata->als1_resistor_sel << LM3530_ALS1_IMP_SHIFT) | | 
|  | (pdata->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT); | 
|  |  | 
|  | } | 
|  |  | 
|  | brt_ramp = (pdata->brt_ramp_fall << LM3530_BRT_RAMP_FALL_SHIFT) | | 
|  | (pdata->brt_ramp_rise << LM3530_BRT_RAMP_RISE_SHIFT); | 
|  |  | 
|  | if (drvdata->brightness) | 
|  | brightness = drvdata->brightness; | 
|  | else | 
|  | brightness = drvdata->brightness = pdata->brt_val; | 
|  |  | 
|  | if (brightness > drvdata->led_dev.max_brightness) | 
|  | brightness = drvdata->led_dev.max_brightness; | 
|  |  | 
|  | reg_val[0] = gen_config;	/* LM3530_GEN_CONFIG */ | 
|  | reg_val[1] = als_config;	/* LM3530_ALS_CONFIG */ | 
|  | reg_val[2] = brt_ramp;		/* LM3530_BRT_RAMP_RATE */ | 
|  | reg_val[3] = als_imp_sel;	/* LM3530_ALS_IMP_SELECT */ | 
|  | reg_val[4] = brightness;	/* LM3530_BRT_CTRL_REG */ | 
|  | reg_val[5] = zones[0];		/* LM3530_ALS_ZB0_REG */ | 
|  | reg_val[6] = zones[1];		/* LM3530_ALS_ZB1_REG */ | 
|  | reg_val[7] = zones[2];		/* LM3530_ALS_ZB2_REG */ | 
|  | reg_val[8] = zones[3];		/* LM3530_ALS_ZB3_REG */ | 
|  | reg_val[9] = LM3530_DEF_ZT_0;	/* LM3530_ALS_Z0T_REG */ | 
|  | reg_val[10] = LM3530_DEF_ZT_1;	/* LM3530_ALS_Z1T_REG */ | 
|  | reg_val[11] = LM3530_DEF_ZT_2;	/* LM3530_ALS_Z2T_REG */ | 
|  | reg_val[12] = LM3530_DEF_ZT_3;	/* LM3530_ALS_Z3T_REG */ | 
|  | reg_val[13] = LM3530_DEF_ZT_4;	/* LM3530_ALS_Z4T_REG */ | 
|  |  | 
|  | if (!drvdata->enable) { | 
|  | ret = regulator_enable(drvdata->regulator); | 
|  | if (ret) { | 
|  | dev_err(&drvdata->client->dev, | 
|  | "Enable regulator failed\n"); | 
|  | return ret; | 
|  | } | 
|  | drvdata->enable = true; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < LM3530_REG_MAX; i++) { | 
|  | /* do not update brightness register when pwm mode */ | 
|  | if (lm3530_reg[i] == LM3530_BRT_CTRL_REG && | 
|  | drvdata->mode == LM3530_BL_MODE_PWM) { | 
|  | if (pwm->pwm_set_intensity) | 
|  | pwm->pwm_set_intensity(reg_val[i], | 
|  | drvdata->led_dev.max_brightness); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | ret = i2c_smbus_write_byte_data(client, | 
|  | lm3530_reg[i], reg_val[i]); | 
|  | if (ret) | 
|  | break; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void lm3530_brightness_set(struct led_classdev *led_cdev, | 
|  | enum led_brightness brt_val) | 
|  | { | 
|  | int err; | 
|  | struct lm3530_data *drvdata = | 
|  | container_of(led_cdev, struct lm3530_data, led_dev); | 
|  | struct lm3530_platform_data *pdata = drvdata->pdata; | 
|  | struct lm3530_pwm_data *pwm = &pdata->pwm_data; | 
|  | u8 max_brightness = led_cdev->max_brightness; | 
|  |  | 
|  | switch (drvdata->mode) { | 
|  | case LM3530_BL_MODE_MANUAL: | 
|  |  | 
|  | if (!drvdata->enable) { | 
|  | err = lm3530_init_registers(drvdata); | 
|  | if (err) { | 
|  | dev_err(&drvdata->client->dev, | 
|  | "Register Init failed: %d\n", err); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* set the brightness in brightness control register*/ | 
|  | err = i2c_smbus_write_byte_data(drvdata->client, | 
|  | LM3530_BRT_CTRL_REG, brt_val); | 
|  | if (err) | 
|  | dev_err(&drvdata->client->dev, | 
|  | "Unable to set brightness: %d\n", err); | 
|  | else | 
|  | drvdata->brightness = brt_val; | 
|  |  | 
|  | if (brt_val == 0) { | 
|  | err = regulator_disable(drvdata->regulator); | 
|  | if (err) | 
|  | dev_err(&drvdata->client->dev, | 
|  | "Disable regulator failed\n"); | 
|  | drvdata->enable = false; | 
|  | } | 
|  | break; | 
|  | case LM3530_BL_MODE_ALS: | 
|  | break; | 
|  | case LM3530_BL_MODE_PWM: | 
|  | if (pwm->pwm_set_intensity) | 
|  | pwm->pwm_set_intensity(brt_val, max_brightness); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static ssize_t lm3530_mode_get(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct led_classdev *led_cdev = dev_get_drvdata(dev); | 
|  | struct lm3530_data *drvdata; | 
|  | int i, len = 0; | 
|  |  | 
|  | drvdata = container_of(led_cdev, struct lm3530_data, led_dev); | 
|  | for (i = 0; i < ARRAY_SIZE(mode_map); i++) | 
|  | if (drvdata->mode == mode_map[i].mode_val) | 
|  | len += sprintf(buf + len, "[%s] ", mode_map[i].mode); | 
|  | else | 
|  | len += sprintf(buf + len, "%s ", mode_map[i].mode); | 
|  |  | 
|  | len += sprintf(buf + len, "\n"); | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static ssize_t lm3530_mode_set(struct device *dev, struct device_attribute | 
|  | *attr, const char *buf, size_t size) | 
|  | { | 
|  | struct led_classdev *led_cdev = dev_get_drvdata(dev); | 
|  | struct lm3530_data *drvdata; | 
|  | struct lm3530_pwm_data *pwm; | 
|  | u8 max_brightness; | 
|  | int mode, err; | 
|  |  | 
|  | drvdata = container_of(led_cdev, struct lm3530_data, led_dev); | 
|  | pwm = &drvdata->pdata->pwm_data; | 
|  | max_brightness = led_cdev->max_brightness; | 
|  | mode = lm3530_get_mode_from_str(buf); | 
|  | if (mode < 0) { | 
|  | dev_err(dev, "Invalid mode\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | drvdata->mode = mode; | 
|  |  | 
|  | /* set pwm to low if unnecessary */ | 
|  | if (mode != LM3530_BL_MODE_PWM && pwm->pwm_set_intensity) | 
|  | pwm->pwm_set_intensity(0, max_brightness); | 
|  |  | 
|  | err = lm3530_init_registers(drvdata); | 
|  | if (err) { | 
|  | dev_err(dev, "Setting %s Mode failed :%d\n", buf, err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | return sizeof(drvdata->mode); | 
|  | } | 
|  | static DEVICE_ATTR(mode, 0644, lm3530_mode_get, lm3530_mode_set); | 
|  |  | 
|  | static int __devinit lm3530_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct lm3530_platform_data *pdata = client->dev.platform_data; | 
|  | struct lm3530_data *drvdata; | 
|  | int err = 0; | 
|  |  | 
|  | if (pdata == NULL) { | 
|  | dev_err(&client->dev, "platform data required\n"); | 
|  | err = -ENODEV; | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | /* BL mode */ | 
|  | if (pdata->mode > LM3530_BL_MODE_PWM) { | 
|  | dev_err(&client->dev, "Illegal Mode request\n"); | 
|  | err = -EINVAL; | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { | 
|  | dev_err(&client->dev, "I2C_FUNC_I2C not supported\n"); | 
|  | err = -EIO; | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | drvdata = kzalloc(sizeof(struct lm3530_data), GFP_KERNEL); | 
|  | if (drvdata == NULL) { | 
|  | err = -ENOMEM; | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | drvdata->mode = pdata->mode; | 
|  | drvdata->client = client; | 
|  | drvdata->pdata = pdata; | 
|  | drvdata->brightness = LED_OFF; | 
|  | drvdata->enable = false; | 
|  | drvdata->led_dev.name = LM3530_LED_DEV; | 
|  | drvdata->led_dev.brightness_set = lm3530_brightness_set; | 
|  | drvdata->led_dev.max_brightness = MAX_BRIGHTNESS; | 
|  |  | 
|  | i2c_set_clientdata(client, drvdata); | 
|  |  | 
|  | drvdata->regulator = regulator_get(&client->dev, "vin"); | 
|  | if (IS_ERR(drvdata->regulator)) { | 
|  | dev_err(&client->dev, "regulator get failed\n"); | 
|  | err = PTR_ERR(drvdata->regulator); | 
|  | drvdata->regulator = NULL; | 
|  | goto err_regulator_get; | 
|  | } | 
|  |  | 
|  | if (drvdata->pdata->brt_val) { | 
|  | err = lm3530_init_registers(drvdata); | 
|  | if (err < 0) { | 
|  | dev_err(&client->dev, | 
|  | "Register Init failed: %d\n", err); | 
|  | err = -ENODEV; | 
|  | goto err_reg_init; | 
|  | } | 
|  | } | 
|  | err = led_classdev_register(&client->dev, &drvdata->led_dev); | 
|  | if (err < 0) { | 
|  | dev_err(&client->dev, "Register led class failed: %d\n", err); | 
|  | err = -ENODEV; | 
|  | goto err_class_register; | 
|  | } | 
|  |  | 
|  | err = device_create_file(drvdata->led_dev.dev, &dev_attr_mode); | 
|  | if (err < 0) { | 
|  | dev_err(&client->dev, "File device creation failed: %d\n", err); | 
|  | err = -ENODEV; | 
|  | goto err_create_file; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_create_file: | 
|  | led_classdev_unregister(&drvdata->led_dev); | 
|  | err_class_register: | 
|  | err_reg_init: | 
|  | regulator_put(drvdata->regulator); | 
|  | err_regulator_get: | 
|  | kfree(drvdata); | 
|  | err_out: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int __devexit lm3530_remove(struct i2c_client *client) | 
|  | { | 
|  | struct lm3530_data *drvdata = i2c_get_clientdata(client); | 
|  |  | 
|  | device_remove_file(drvdata->led_dev.dev, &dev_attr_mode); | 
|  |  | 
|  | if (drvdata->enable) | 
|  | regulator_disable(drvdata->regulator); | 
|  | regulator_put(drvdata->regulator); | 
|  | led_classdev_unregister(&drvdata->led_dev); | 
|  | kfree(drvdata); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id lm3530_id[] = { | 
|  | {LM3530_NAME, 0}, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, lm3530_id); | 
|  |  | 
|  | static struct i2c_driver lm3530_i2c_driver = { | 
|  | .probe = lm3530_probe, | 
|  | .remove = __devexit_p(lm3530_remove), | 
|  | .id_table = lm3530_id, | 
|  | .driver = { | 
|  | .name = LM3530_NAME, | 
|  | .owner = THIS_MODULE, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(lm3530_i2c_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("Back Light driver for LM3530"); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_AUTHOR("Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>"); |