| # Makefile for uClibc |
| # |
| # Copyright (C) 2000-2008 Erik Andersen <andersen@uclibc.org> |
| # |
| # Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. |
| # |
| |
| #-------------------------------------------------------------- |
| # You shouldn't need to mess with anything beyond this point... |
| #-------------------------------------------------------------- |
| clean_targets := clean realclean distclean \ |
| objclean-y headers_clean-y CLEAN_utils |
| noconfig_targets := menuconfig config oldconfig silentoldconfig randconfig \ |
| defconfig allyesconfig allnoconfig \ |
| release dist tags help |
| |
| include $(top_srcdir)Rules.mak |
| sub_headers := headers |
| ifndef KCONFIG_CONFIG |
| KCONFIG_CONFIG := $(top_builddir).config |
| endif |
| export KCONFIG_CONFIG |
| |
| ifeq ($(HAVE_DOT_CONFIG),y) |
| |
| all: pregen libs |
| libs: pregen |
| |
| # In this section, we need .config |
| -include $(top_builddir).config.cmd |
| |
| else # ifeq ($(HAVE_DOT_CONFIG),y) |
| |
| all: menuconfig |
| |
| headers: |
| @echo "Need to make a config file first, run: make menuconfig" |
| @false |
| |
| endif # ifeq ($(HAVE_DOT_CONFIG),y) |
| |
| include $(top_srcdir)ldso/Makefile.in |
| include $(top_srcdir)libcrypt/Makefile.in |
| include $(top_srcdir)libintl/Makefile.in |
| include $(top_srcdir)libm/Makefile.in |
| include $(top_srcdir)libnsl/Makefile.in |
| include $(top_srcdir)libresolv/Makefile.in |
| include $(top_srcdir)libutil/Makefile.in |
| include $(top_srcdir)libpthread/Makefile.in |
| include $(top_srcdir)librt/Makefile.in |
| include $(top_srcdir)libubacktrace/Makefile.in |
| include $(top_srcdir)extra/locale/Makefile.in |
| |
| # last included to catch all the objects added by others (locales/threads) |
| include $(top_srcdir)libc/Makefile.in |
| |
| conf := $(top_builddir)extra/config/conf |
| mconf := $(top_builddir)extra/config/mconf |
| |
| ifeq ($(HAVE_DOT_CONFIG),y) |
| # If the .config changes then we have to make sure that our includes are |
| # updated properly. This would normally work by saying that the headers |
| # have uClibc_config.h as prerequisite but since we _symlink_ the headers |
| # and do not (?) want to rely on 'make -L' we better update them right here, |
| # on spot to save us from alot of hazzle. |
| $(top_builddir)include/bits/uClibc_config.h: $(conf) $(KCONFIG_CONFIG) $(top_srcdir)extra/scripts/conf-header.sh | $(top_builddir)include/bits $(top_builddir)include/config |
| @$(disp_gen) |
| $(Q)@$< -s $(top_srcdir)extra/Configs/Config.in |
| $(Q)$(top_srcdir)extra/scripts/conf-header.sh $(KCONFIG_CONFIG) > $@ |
| $(Q)$(MAKE) headers-y |
| |
| # The above doesn't work for threads, though. Just using check-symlinks for now. |
| # XXX: FIXME: this is ugly |
| MAKEFLAGS += -L |
| |
| $(top_builddir)include/config/linuxthreads/old.h $(top_builddir)include/config/linuxthreads/new.h: |
| @true |
| |
| # For the moment, we have to keep re-running this target |
| # because the fix includes scripts rely on pre-processers |
| # in order to generate the headers correctly :(. That |
| # means we can't use the $(HOSTCC) in order to get the |
| # correct output. |
| ifeq ($(ARCH_USE_MMU),y) |
| export header_extra_args = |
| else |
| export header_extra_args = -n |
| endif |
| HEADERS_BITS_COMMON := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/common/bits/*.h)) |
| HEADERS_BITS_ARCH := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/*.h)) |
| HEADERS_BITS_SUBARCH := |
| ifneq ($(TARGET_SUBARCH),) |
| HEADERS_BITS_SUBARCH := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/$(TARGET_SUBARCH)/*.h)) |
| endif |
| HEADERS_BITS_COMMON := $(filter-out $(HEADERS_BITS_ARCH) $(HEADERS_BITS_SUBARCH) $(HEADERS_BITS_PTHREAD),$(HEADERS_BITS_COMMON)) |
| |
| HEADERS_SYS_COMMON := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/common/sys/*.h)) |
| HEADERS_SYS_ARCH := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/sys/*.h)) |
| HEADERS_SYS_COMMON := $(filter-out $(HEADERS_SYS_ARCH),$(HEADERS_SYS_COMMON)) |
| |
| ALL_HEADERS_COMMON := $(top_builddir)include/fpu_control.h \ |
| $(top_builddir)include/dl-osinfo.h \ |
| $(top_builddir)include/hp-timing.h |
| ALL_HEADERS_BITS_COMMON := $(addprefix $(top_builddir)include/bits/,$(HEADERS_BITS_COMMON)) |
| ALL_HEADERS_BITS_ARCH := $(addprefix $(top_builddir)include/bits/,$(HEADERS_BITS_ARCH)) |
| ifneq ($(TARGET_SUBARCH),) |
| ALL_HEADERS_BITS_SUBARCH := $(addprefix $(top_builddir)include/bits/,$(HEADERS_BITS_SUBARCH)) |
| else |
| ALL_HEADERS_BITS_SUBARCH := |
| endif |
| ALL_HEADERS_SYS_COMMON := $(addprefix $(top_builddir)include/sys/,$(HEADERS_SYS_COMMON)) |
| ALL_HEADERS_SYS_ARCH := $(addprefix $(top_builddir)include/sys/,$(HEADERS_SYS_ARCH)) |
| |
| target-headers-sysdep := \ |
| $(ALL_HEADERS_COMMON) \ |
| $(ALL_HEADERS_BITS_COMMON) \ |
| $(ALL_HEADERS_BITS_ARCH) \ |
| $(ALL_HEADERS_BITS_SUBARCH) \ |
| $(ALL_HEADERS_SYS_COMMON) \ |
| $(ALL_HEADERS_SYS_ARCH) \ |
| $(ALL_HEADERS_BITS_PTHREAD) |
| |
| $(top_builddir)include/fpu_control.h: |
| @$(disp_ln) |
| $(Q)[ -r $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/$(@F) ] && \ |
| $(LN) -fs $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/$(@F) $@ || \ |
| $(LN) -fs $(call rel_srcdir)libc/sysdeps/linux/common/$(@F) $@ |
| |
| $(top_builddir)include/dl-osinfo.h $(top_builddir)include/hp-timing.h: |
| $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/common/$(@F) $@ |
| |
| $(ALL_HEADERS_BITS_COMMON): |
| $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/common/bits/$(@F) $@ |
| |
| $(ALL_HEADERS_BITS_ARCH): |
| $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/$(@F) $@ |
| |
| ifneq ($(TARGET_SUBARCH),) |
| $(ALL_HEADERS_BITS_SUBARCH): |
| $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/$(TARGET_SUBARCH)/$(@F) $@ |
| endif |
| |
| ifneq ($(strip $(ALL_HEADERS_SYS_COMMON)),) |
| $(ALL_HEADERS_SYS_COMMON): |
| $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/common/sys/$(@F) $@ |
| endif |
| |
| ifneq ($(strip $(ALL_HEADERS_SYS_ARCH)),) |
| $(ALL_HEADERS_SYS_ARCH): |
| $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/sys/$(@F) $@ |
| endif |
| |
| $(target-headers-sysdep) $(pregen-headers-y): | $(top_builddir)include/bits $(top_builddir)include/sys |
| |
| HEADERCLEAN_common: |
| $(do_rm) $(ALL_HEADERS_COMMON) |
| headers_clean-y += HEADERCLEAN_common |
| |
| # The headers. Arch specific headers are specified via ARCH_HEADERS in |
| # libc/sysdeps/linux/$(TARGET_ARCH)/Makefile.arch which appends those via |
| # libc/sysdeps/linux/Makefile.commonarch to headers-y |
| headers-y += $(target-headers-sysdep) |
| |
| headers: $(top_builddir)include/bits/uClibc_config.h | subdirs |
| subdirs: $(addprefix $(top_builddir),$(subdirs)) |
| pregen-headers: $(top_builddir)include/bits/sysnum.h $(pregen-headers-y) |
| pregen: headers pregen-headers |
| $(Q)$(if $(UCLIBC_HAS_LOCALE),$(MAKE) -C extra/locale locale_headers) |
| |
| $(top_builddir)include/bits/sysnum.h: $(top_srcdir)extra/scripts/gen_bits_syscall_h.sh | $(top_builddir)include/bits |
| @$(disp_gen) |
| $(Q)set -e; \ |
| tmp=`mktemp $(top_builddir)include/bits/sysnum.h.XXXXXX 2>/dev/null || true`; \ |
| [ -z "$$tmp" ] && tmp='$(top_builddir)include/bits/sysnum.h.new'; \ |
| KERNEL_HEADERS="${KERNEL_HEADERS}" top_builddir="$(top_builddir)" CC="$(CC) $(CPU_CFLAGS)" $(SHELL) $< > $$tmp; \ |
| if cmp $(top_builddir)include/bits/sysnum.h $$tmp >/dev/null 2>&1; then \ |
| $(RM) $$tmp; \ |
| else \ |
| mv -f $$tmp $(top_builddir)include/bits/sysnum.h; \ |
| fi |
| @# Ugly linux specific hack.. |
| $(Q)if grep -q __NR_ $@; then true; else \ |
| rm -f $@; \ |
| echo "ERROR: Could not generate syscalls."; \ |
| echo "Make sure that you have proper kernel headers."; \ |
| echo "Your .config in KERNEL_HEADERS=\"\" was set to:"; \ |
| echo "${KERNEL_HEADERS}"; \ |
| exit 1; \ |
| fi |
| |
| .PHONY: $(LOCAL_INSTALL_PATH) |
| $(LOCAL_INSTALL_PATH): |
| $(Q)$(MAKE) PREFIX=$(shell pwd)/$(LOCAL_INSTALL_PATH) RUNTIME_PREFIX=/ \ |
| DEVEL_PREFIX=/usr/ \ |
| HOSTCC="$(HOSTCC)" \ |
| install |
| |
| install: install_runtime install_dev |
| |
| |
| RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB=$(shell $(top_srcdir)extra/scripts/relative_path.sh $(DEVEL_PREFIX)$(MULTILIB_DIR) $(RUNTIME_PREFIX)$(MULTILIB_DIR)) |
| |
| startfiles: $(crt-y) |
| |
| $(top_builddir)extra/scripts/unifdef: |$(top_builddir)extra/scripts |
| $(top_builddir)extra/scripts/unifdef: $(top_srcdir)extra/scripts/unifdef.c |
| $(hcompile.u) |
| |
| # Installs header files. |
| # a "y" here means the feature is enabled and so we should *not* rm it. |
| # if the option expands to nothing though, we can punt the headers. |
| HEADERS_RM- := \ |
| dl-osinfo.h \ |
| hp-timing.h \ |
| _lfs_64.h \ |
| bits/uClibc_arch_features.h \ |
| bits/kernel_sigaction.h \ |
| bits/kernel_stat.h \ |
| bits/kernel_types.h \ |
| bits/syscalls.h \ |
| bits/syscalls-common.h \ |
| bits/uClibc_fpmax.h \ |
| bits/uClibc_uintmaxtostr.h \ |
| bits/uClibc_uwchar.h \ |
| bits/uClibc_va_copy.h \ |
| bits/sigcontextinfo.h \ |
| bits/stackinfo.h \ |
| tls.h \ |
| rpc/des_crypt.h \ |
| rpc/key_prot.h \ |
| rpc/rpc_des.h |
| ifeq ($(UCLIBC_STRICT_HEADERS),y) |
| HEADERS_RM- += sgtty.h |
| endif |
| HEADERS_RM-$(HAVE_SHARED) += dlfcn.h bits/dlfcn.h |
| HEADERS_RM-$(PTHREADS_DEBUG_SUPPORT) += thread_db.h |
| HEADERS_RM-$(UCLIBC_HAS_BSD_ERR) += err.h |
| HEADERS_RM-$(UCLIBC_HAS_CRYPT) += crypt.h |
| HEADERS_RM-$(UCLIBC_HAS_EPOLL) += sys/epoll.h |
| HEADERS_RM-$(UCLIBC_HAS_FENV) += fenv.h bits/fenv.h bits/fenvinline.h |
| HEADERS_RM-$(UCLIBC_HAS_FLOATS) += complex.h fpu_control.h ieee754.h \ |
| math.h \ |
| tgmath.h \ |
| bits/math*.h |
| HEADERS_RM-$(findstring y,$(UCLIBC_HAS_FTW)$(UCLIBC_HAS_NFTW)) += ftw.h |
| HEADERS_RM-$(UCLIBC_HAS_FTS) += fts.h |
| HEADERS_RM-$(UCLIBC_HAS_GETTEXT_AWARENESS) += libintl.h |
| HEADERS_RM-$(UCLIBC_HAS_GLIBC_CUSTOM_PRINTF) += printf.h |
| HEADERS_RM-$(UCLIBC_HAS_GLOB) += glob.h |
| HEADERS_RM-$(UCLIBC_HAS_GNU_ERROR) += error.h |
| HEADERS_RM-$(UCLIBC_HAS_GNU_GETOPT)$(UCLIBC_HAS_GETOPT_LONG) += getopt.h |
| HEADERS_RM-$(UCLIBC_HAS_IPV6) += netinet/ip6.h netinet/icmp6.h |
| HEADERS_RM-$(UCLIBC_HAS_BACKTRACE) += execinfo.h |
| HEADERS_RM-$(UCLIBC_HAS_LOCALE) += iconv.h bits/uClibc_ctype.h |
| HEADERS_RM-$(UCLIBC_HAS_PTY) += pty.h |
| HEADERS_RM-$(UCLIBC_HAS_REALTIME) += mqueue.h bits/mqueue.h sched.h \ |
| bits/sched.h \ |
| semaphore.h |
| HEADERS_RM-$(UCLIBC_HAS_REGEX) += regex.h regexp.h |
| HEADERS_RM-$(UCLIBC_HAS_RPC) += rpc |
| HEADERS_RM-$(UCLIBC_HAS_SHADOW) += shadow.h |
| HEADERS_RM-$(UCLIBC_HAS_SOCKET) += sys/socket.h bits/socket.h sys/socketvar.h |
| HEADERS_RM-$(UCLIBC_HAS_SYSLOG) += syslog.h sys/syslog.h bits/syslog*.h |
| HEADERS_RM-$(UCLIBC_HAS_THREADS) += *thread*.h semaphore.h \ |
| bits/*thread*.h \ |
| bits/initspin.h |
| HEADERS_RM-$(UCLIBC_HAS_THREADS_NATIVE) += atomic.h bits/atomic.h |
| HEADERS_RM-$(UCLIBC_HAS_UTMPX) += bits/utmpx.h utmpx.h |
| HEADERS_RM-$(UCLIBC_HAS_WCHAR) += wchar.h wctype.h |
| HEADERS_RM-$(UCLIBC_HAS_WORDEXP) += wordexp.h |
| HEADERS_RM-$(UCLIBC_HAS_XATTR) += sys/xattr.h |
| HEADERS_RM-$(UCLIBC_HAS_XLOCALE) += xlocale.h |
| HEADERS_RM-$(UCLIBC_LINUX_SPECIFIC) += sys/eventfd.h sys/fsuid.h \ |
| bits/inotify.h \ |
| sys/inotify.h \ |
| sys/kdaemon.h \ |
| sys/perm.h \ |
| sys/personality.h \ |
| sys/prctl.h \ |
| sys/reboot.h \ |
| sys/sendfile.h \ |
| bits/signalfd.h \ |
| sys/signalfd.h \ |
| bits/statfs.h \ |
| sys/statfs.h \ |
| sys/swap.h \ |
| sys/sysctl.h \ |
| sys/sysinfo.h \ |
| bits/timerfd.h \ |
| sys/timerfd.h \ |
| sys/vfs.h |
| HEADERS_RM-$(UCLIBC_SUPPORT_AI_ADDRCONFIG) += ifaddrs.h |
| HEADERS_RM-$(UCLIBC_SV4_DEPRECATED) += ustat.h sys/ustat.h bits/ustat.h |
| HEADERS_RM-$(UCLIBC_SUSV3_LEGACY) += sys/timeb.h regexp.h |
| HEADERS_RM-$(UCLIBC_SUSV4_LEGACY) += utime.h ucontext.h |
| |
| ifneq ($(findstring install,$(MAKECMDGOALS)),) |
| $(addprefix $(PREFIX)$(DEVEL_PREFIX),include $(MULTILIB_DIR)): |
| $(do_mkdir) |
| # avoid warning about duplicate targets in rule or overrides |
| ifneq ($(abspath $(RUNTIME_PREFIX)$(MULTILIB_DIR)),$(abspath $(DEVEL_PREFIX)$(MULTILIB_DIR))) |
| $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR): |
| $(do_mkdir) |
| endif |
| endif |
| install_headers: headers $(top_builddir)extra/scripts/unifdef | $(PREFIX)$(DEVEL_PREFIX)include |
| @$(call disp_install,"include -> $(PREFIX)$(DEVEL_PREFIX)include") |
| $(Q)top_builddir=$(top_builddir) \ |
| $(top_srcdir)extra/scripts/install_headers.sh \ |
| include $(PREFIX)$(DEVEL_PREFIX)include |
| ifneq ($(O),) # only run this step in O is set i.e. make O=/my/builddir/ .. |
| @$(call disp_install,"$(top_builddir)/include -> $(PREFIX)$(DEVEL_PREFIX)include") |
| $(Q)top_builddir=$(top_builddir) \ |
| $(top_srcdir)extra/scripts/install_headers.sh \ |
| $(top_builddir)/include $(PREFIX)$(DEVEL_PREFIX)include |
| endif |
| $(Q)cd $(PREFIX)$(DEVEL_PREFIX)include && $(RM) -r $(HEADERS_RM-) |
| ifeq ($(UCLIBC_HAS_WCHAR),) |
| $(Q)cd $(PREFIX)$(DEVEL_PREFIX)include && mv -f wchar-stub.h wchar.h |
| else |
| $(Q)cd $(PREFIX)$(DEVEL_PREFIX)include && $(RM) -f wchar-stub.h |
| endif |
| |
| # Installs startfiles |
| install_startfiles: startfiles | $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR) |
| -$(INSTALL) -m 644 $(startfiles) $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/ |
| |
| # Installs development library links. |
| install_dev: install_headers install_runtime install_startfiles | $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR) |
| -$(INSTALL) -m 644 $(top_builddir)lib/*.a $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/ |
| ifeq ($(HAVE_SHARED),y) |
| for i in `cd $(top_builddir) && find lib/ -type l -name 'lib[a-zA-Z]*.so' | \ |
| $(SED) -e 's/lib\///'` ; do \ |
| $(LN) -sf $(RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB)$$i.$(ABI_VERSION) \ |
| $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/$$i; \ |
| done |
| ifeq ($(HARDWIRED_ABSPATH),y) |
| if [ -f $(top_builddir)lib/libc.so -a -f $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(SHARED_LIBNAME) ] ; then \ |
| $(RM) $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \ |
| $(SED) -e 's:$(NONSHARED_LIBNAME):$(DEVEL_PREFIX)$(MULTILIB_DIR)/$(NONSHARED_LIBNAME):' \ |
| -e 's:$(SHARED_LIBNAME):$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(SHARED_LIBNAME):' \ |
| -e 's:$(UCLIBC_LDSO):$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(UCLIBC_LDSO):' \ |
| $(top_builddir)lib/libc.so > $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \ |
| $(SED) -i -e 's://:/:g' $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \ |
| fi |
| else |
| -$(INSTALL) -m 755 $(top_builddir)lib/libc.so $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/ |
| endif |
| ifeq ($(UCLIBC_HAS_BACKTRACE),y) |
| # Add the AS_NEEDED entry for libubacktrace.so |
| if [ -f $(top_builddir)lib/libc.so -a -f $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(SHARED_LIBNAME) ] ; then \ |
| echo "GROUP ( $(UBACKTRACE_ASNEEDED) )" >> $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \ |
| fi |
| endif |
| ifeq ($(UCLIBC_HAS_THREADS),y) |
| ifneq ($(LINUXTHREADS_OLD),y) |
| ifeq ($(HARDWIRED_ABSPATH),y) |
| if [ -f $(top_builddir)lib/libpthread.so -a -f $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)/libpthread.so.$(ABI_VERSION) ] ; then \ |
| $(RM) $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread.so; \ |
| cp $(top_srcdir)extra/scripts/format.lds $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread.so; \ |
| echo "GROUP ( $(RUNTIME_PREFIX)$(MULTILIB_DIR)/libpthread.so.$(ABI_VERSION) $(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread_nonshared.a )" \ |
| >> $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread.so; \ |
| $(SED) -i -e 's://:/:g' $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread.so; \ |
| fi |
| else |
| -$(INSTALL) -m 755 $(top_builddir)lib/libpthread.so $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/ |
| endif |
| endif |
| endif |
| ifeq ($(PTHREADS_DEBUG_SUPPORT),y) |
| $(LN) -sf $(RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB)libthread_db.so.1 \ |
| $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libthread_db.so |
| endif |
| ifeq ($(DOPIC),y) |
| # # If we build shared libraries then the static libs are PIC... |
| # # Make _pic.a symlinks to make mklibs.py and similar tools happy. |
| if [ -d $(top_builddir)lib ] ; then \ |
| for i in `cd $(top_builddir) && find lib/ -type f -name 'lib*.a' | $(SED) -e 's/lib\///'` ; do \ |
| $(LN) -sf $$i $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/`echo $$i \ |
| | $(SED) -e 's/\.a$$/_pic.a/'`; \ |
| done ; \ |
| fi |
| endif |
| endif |
| ifeq ($(UCLIBC_FORMAT_SHARED_FLAT),y) |
| for file in $(top_builddir)lib/lib*.gdb; do \ |
| if test -f $$file; then \ |
| $(INSTALL) -m 755 $$file $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR); \ |
| $(INSTALL) -m 755 `echo $$file | $(SED) 's/\.gdb$$//'` \ |
| $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR); \ |
| fi; \ |
| done |
| endif |
| |
| # Installs run-time libraries |
| install_runtime: all | $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR) |
| ifeq ($(HAVE_SHARED),y) |
| $(INSTALL) -m 755 $(top_builddir)lib/lib*-$(VERSION).so \ |
| $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR) |
| (cd $(top_builddir)lib && $(TAR) --exclude=$(UCLIBC_LDSO_NAME).so.lds -cf - *.so.*) \ |
| | $(TAR) -xf - -C $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR) |
| @if [ -x $(top_builddir)lib/$(UCLIBC_LDSO_NAME)-$(VERSION).so ] ; then \ |
| set -e; \ |
| $(SHELL_SET_X); \ |
| $(INSTALL) -m 755 $(top_builddir)lib/$(UCLIBC_LDSO_NAME)-$(VERSION).so \ |
| $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR); \ |
| fi |
| endif |
| |
| utils: | pregen |
| $(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" -C utils $@ |
| |
| # Installs helper applications, such as 'ldd' and 'ldconfig' |
| install_utils: utils |
| $(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" -C utils utils_install |
| |
| endif # ifeq ($(HAVE_DOT_CONFIG),y) |
| |
| hostutils: | pregen |
| $(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" HOSTCC="$(HOSTCC)" DOTHOST=.host -C utils $@ |
| |
| install_hostutils: hostutils |
| $(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" HOSTCC="$(HOSTCC)" DOTHOST=.host -C utils utils_install |
| |
| $(addprefix $(top_builddir),include include/bits include/sys include/config lib extra/config/lxdialog extra/locale extra/scripts $(subdirs)): |
| $(do_mkdir) |
| |
| # configuration |
| # --------------------------------------------------------------------------- |
| $(conf) $(mconf): | $(top_builddir)include/config $(top_builddir)extra/config/lxdialog |
| $(Q)$(MAKE) -C extra/config $(@F) |
| |
| arch-defconfigs := $(notdir $(wildcard $(top_srcdir)extra/Configs/defconfigs/$(ARCH)/*_defconfig)) |
| |
| menuconfig: $(mconf) |
| $(Q)$< extra/Configs/Config.in |
| |
| config: $(conf) |
| $(Q)$< extra/Configs/Config.in |
| |
| oldconfig: $(conf) |
| $(Q)$< -o extra/Configs/Config.in |
| |
| silentoldconfig: $(conf) |
| $(Q)$< -s extra/Configs/Config.in |
| |
| randconfig: $(conf) |
| $(Q)$< -r extra/Configs/Config.in |
| |
| allyesconfig: $(conf) |
| $(Q)$< -y extra/Configs/Config.in |
| $(SED) -i -e "s/^DODEBUG=.*/# DODEBUG is not set/" \ |
| -e "s/^DOASSERTS=.*/# DOASSERTS is not set/" \ |
| -e "s/^SUPPORT_LD_DEBUG_EARLY=.*/# SUPPORT_LD_DEBUG_EARLY is not set/" \ |
| -e "s/^SUPPORT_LD_DEBUG=.*/# SUPPORT_LD_DEBUG is not set/" \ |
| -e "s/^UCLIBC_MJN3_ONLY=.*/# UCLIBC_MJN3_ONLY is not set/" \ |
| $(KCONFIG_CONFIG) |
| $(Q)$< -o extra/Configs/Config.in |
| |
| allnoconfig: $(conf) |
| $(Q)$< -n extra/Configs/Config.in |
| |
| defconfig: $(conf) |
| $(Q)$< -D extra/Configs/defconfigs/$(ARCH)/$@ extra/Configs/Config.in |
| |
| %_defconfig: $(conf) |
| $(Q)$< -D extra/Configs/defconfigs/$(ARCH)/$@ extra/Configs/Config.in |
| |
| menuconfig-clean-y: |
| $(Q)$(MAKE) -C extra/config CLEAN_extra/config |
| |
| # The find here should continue to work as long as we are only symlinking |
| # headers in to include/. I don't see this changing to anything else, so |
| # it should be fine. |
| include_clean: |
| $(SECHO) " CLEAN include" |
| $(Q)$(RM) -r $(top_builddir)include/bits |
| $(Q)find $(top_builddir)include/ -type l -exec rm -f {} + |
| |
| clean: include_clean |
| $(Q)$(RM) -r $(top_builddir)lib |
| @$(MAKE) -C utils CLEAN_utils |
| +$(MAKE) -s -C test clean |
| $(Q)$(RM) $(top_builddir)extra/scripts/unifdef |
| $(Q)$(RM) -r $(LOCAL_INSTALL_PATH) |
| |
| # |
| # Target for uClinux distro |
| # |
| UCLIBC_VERSION := $(MAJOR_VERSION).$(MINOR_VERSION).$(SUBLEVEL)$(EXTRAVERSION) |
| .PHONY: romfs |
| romfs: |
| [ -e $(ROMFSDIR)/lib ] || mkdir $(ROMFSDIR)/lib |
| if [ "$(SHARED_TARGET)" ]; then \ |
| $(ROMFSINST) $(SHARED_TARGET) /lib/lib$(LIBID).so; \ |
| fi |
| ifeq ($(strip $(HAVE_SHARED)),y) |
| set -e; for i in lib/lib*-$(UCLIBC_VERSION).so lib/*.so.*; do \ |
| if [ -L $$i ]; then \ |
| $(ROMFSINST) -s `readlink $$i` /$$i; \ |
| else \ |
| $(ROMFSINST) -p 755 $$i /lib; \ |
| fi; \ |
| done |
| set -e; if [ -x lib/ld-uClibc-$(UCLIBC_VERSION).so ] ; then \ |
| $(ROMFSINST) -p 755 lib/ld-uClibc-$(UCLIBC_VERSION).so /lib; \ |
| #$(ROMFSINST) -s \ |
| # /lib/ld-uClibc-$(UCLIBC_VERSION).so \ |
| # $(LDSOGCC) ; \ |
| fi |
| endif |
| |
| distclean: clean |
| -find . \( -name core -o -name \*.orig -o -name \*~ -o -name .\*.dep \) -exec $(RM) {} \; |
| $(RM) $(top_builddir).config $(top_builddir).config.old $(top_builddir).config.cmd |
| $(RM) $(top_builddir)extra/locale/*.tgz |
| $(MAKE) -C extra/config distclean |
| |
| dist release: |
| $(RM) ../uClibc-$(VERSION).tar |
| git archive --format=tar --prefix=uClibc-$(VERSION)/ HEAD \ |
| > ../uClibc-$(VERSION).tar |
| cat ../uClibc-$(VERSION).tar | bzip2 -c9 > ../uClibc-$(VERSION).tar.bz2 |
| cat ../uClibc-$(VERSION).tar | xz -e -c8 > ../uClibc-$(VERSION).tar.xz |
| du -b ../uClibc-$(VERSION).tar.{bz2,xz} |
| |
| test check: test_compile |
| $(Q)$(MAKE) -C test |
| |
| test_compile: $(LOCAL_INSTALL_PATH) |
| $(Q)$(MAKE) -C test compile |