| /* | 
 |  * LM73 Sensor driver | 
 |  * Based on LM75 | 
 |  * | 
 |  * Copyright (C) 2007, CenoSYS (www.cenosys.com). | 
 |  * Copyright (C) 2009, Bollore telecom (www.bolloretelecom.eu). | 
 |  * | 
 |  * Guillaume Ligneul <guillaume.ligneul@gmail.com> | 
 |  * Adrien Demarez <adrien.demarez@bolloretelecom.eu> | 
 |  * Jeremy Laine <jeremy.laine@bolloretelecom.eu> | 
 |  * | 
 |  * This software program is licensed subject to the GNU General Public License | 
 |  * (GPL).Version 2,June 1991, available at | 
 |  * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/hwmon.h> | 
 | #include <linux/hwmon-sysfs.h> | 
 | #include <linux/err.h> | 
 |  | 
 |  | 
 | /* Addresses scanned */ | 
 | static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c, | 
 | 					0x4d, 0x4e, I2C_CLIENT_END }; | 
 |  | 
 | /* LM73 registers */ | 
 | #define LM73_REG_INPUT		0x00 | 
 | #define LM73_REG_CONF		0x01 | 
 | #define LM73_REG_MAX		0x02 | 
 | #define LM73_REG_MIN		0x03 | 
 | #define LM73_REG_CTRL		0x04 | 
 | #define LM73_REG_ID		0x07 | 
 |  | 
 | #define LM73_ID			0x9001	/* 0x0190, byte-swapped */ | 
 | #define DRVNAME			"lm73" | 
 | #define LM73_TEMP_MIN		(-40) | 
 | #define LM73_TEMP_MAX		150 | 
 |  | 
 | /*-----------------------------------------------------------------------*/ | 
 |  | 
 |  | 
 | static ssize_t set_temp(struct device *dev, struct device_attribute *da, | 
 | 			const char *buf, size_t count) | 
 | { | 
 | 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da); | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	long temp; | 
 | 	short value; | 
 | 	s32 err; | 
 |  | 
 | 	int status = kstrtol(buf, 10, &temp); | 
 | 	if (status < 0) | 
 | 		return status; | 
 |  | 
 | 	/* Write value */ | 
 | 	value = (short) SENSORS_LIMIT(temp/250, (LM73_TEMP_MIN*4), | 
 | 		(LM73_TEMP_MAX*4)) << 5; | 
 | 	err = i2c_smbus_write_word_swapped(client, attr->index, value); | 
 | 	return (err < 0) ? err : count; | 
 | } | 
 |  | 
 | static ssize_t show_temp(struct device *dev, struct device_attribute *da, | 
 | 			 char *buf) | 
 | { | 
 | 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da); | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	int temp; | 
 |  | 
 | 	s32 err = i2c_smbus_read_word_swapped(client, attr->index); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* use integer division instead of equivalent right shift to | 
 | 	   guarantee arithmetic shift and preserve the sign */ | 
 | 	temp = (((s16) err) * 250) / 32; | 
 | 	return scnprintf(buf, PAGE_SIZE, "%d\n", temp); | 
 | } | 
 |  | 
 |  | 
 | /*-----------------------------------------------------------------------*/ | 
 |  | 
 | /* sysfs attributes for hwmon */ | 
 |  | 
 | static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, | 
 | 			show_temp, set_temp, LM73_REG_MAX); | 
 | static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, | 
 | 			show_temp, set_temp, LM73_REG_MIN); | 
 | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, | 
 | 			show_temp, NULL, LM73_REG_INPUT); | 
 |  | 
 |  | 
 | static struct attribute *lm73_attributes[] = { | 
 | 	&sensor_dev_attr_temp1_input.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp1_max.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp1_min.dev_attr.attr, | 
 |  | 
 | 	NULL | 
 | }; | 
 |  | 
 | static const struct attribute_group lm73_group = { | 
 | 	.attrs = lm73_attributes, | 
 | }; | 
 |  | 
 | /*-----------------------------------------------------------------------*/ | 
 |  | 
 | /* device probe and removal */ | 
 |  | 
 | static int | 
 | lm73_probe(struct i2c_client *client, const struct i2c_device_id *id) | 
 | { | 
 | 	struct device *hwmon_dev; | 
 | 	int status; | 
 |  | 
 | 	/* Register sysfs hooks */ | 
 | 	status = sysfs_create_group(&client->dev.kobj, &lm73_group); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	hwmon_dev = hwmon_device_register(&client->dev); | 
 | 	if (IS_ERR(hwmon_dev)) { | 
 | 		status = PTR_ERR(hwmon_dev); | 
 | 		goto exit_remove; | 
 | 	} | 
 | 	i2c_set_clientdata(client, hwmon_dev); | 
 |  | 
 | 	dev_info(&client->dev, "%s: sensor '%s'\n", | 
 | 		 dev_name(hwmon_dev), client->name); | 
 |  | 
 | 	return 0; | 
 |  | 
 | exit_remove: | 
 | 	sysfs_remove_group(&client->dev.kobj, &lm73_group); | 
 | 	return status; | 
 | } | 
 |  | 
 | static int lm73_remove(struct i2c_client *client) | 
 | { | 
 | 	struct device *hwmon_dev = i2c_get_clientdata(client); | 
 |  | 
 | 	hwmon_device_unregister(hwmon_dev); | 
 | 	sysfs_remove_group(&client->dev.kobj, &lm73_group); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct i2c_device_id lm73_ids[] = { | 
 | 	{ "lm73", 0 }, | 
 | 	{ /* LIST END */ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, lm73_ids); | 
 |  | 
 | /* Return 0 if detection is successful, -ENODEV otherwise */ | 
 | static int lm73_detect(struct i2c_client *new_client, | 
 | 			struct i2c_board_info *info) | 
 | { | 
 | 	struct i2c_adapter *adapter = new_client->adapter; | 
 | 	int id, ctrl, conf; | 
 |  | 
 | 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | | 
 | 					I2C_FUNC_SMBUS_WORD_DATA)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* | 
 | 	 * Do as much detection as possible with byte reads first, as word | 
 | 	 * reads can confuse other devices. | 
 | 	 */ | 
 | 	ctrl = i2c_smbus_read_byte_data(new_client, LM73_REG_CTRL); | 
 | 	if (ctrl < 0 || (ctrl & 0x10)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	conf = i2c_smbus_read_byte_data(new_client, LM73_REG_CONF); | 
 | 	if (conf < 0 || (conf & 0x0c)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	id = i2c_smbus_read_byte_data(new_client, LM73_REG_ID); | 
 | 	if (id < 0 || id != (LM73_ID & 0xff)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* Check device ID */ | 
 | 	id = i2c_smbus_read_word_data(new_client, LM73_REG_ID); | 
 | 	if (id < 0 || id != LM73_ID) | 
 | 		return -ENODEV; | 
 |  | 
 | 	strlcpy(info->type, "lm73", I2C_NAME_SIZE); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct i2c_driver lm73_driver = { | 
 | 	.class		= I2C_CLASS_HWMON, | 
 | 	.driver = { | 
 | 		.name	= "lm73", | 
 | 	}, | 
 | 	.probe		= lm73_probe, | 
 | 	.remove		= lm73_remove, | 
 | 	.id_table	= lm73_ids, | 
 | 	.detect		= lm73_detect, | 
 | 	.address_list	= normal_i2c, | 
 | }; | 
 |  | 
 | module_i2c_driver(lm73_driver); | 
 |  | 
 | MODULE_AUTHOR("Guillaume Ligneul <guillaume.ligneul@gmail.com>"); | 
 | MODULE_DESCRIPTION("LM73 driver"); | 
 | MODULE_LICENSE("GPL"); |