| /*************************************************************************** |
| * _ _ ____ _ |
| * Project ___| | | | _ \| | |
| * / __| | | | |_) | | |
| * | (__| |_| | _ <| |___ |
| * \___|\___/|_| \_\_____| |
| * |
| * Copyright (C) 2012 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al. |
| * |
| * This software is licensed as described in the file COPYING, which |
| * you should have received as part of this distribution. The terms |
| * are also available at https://curl.se/docs/copyright.html. |
| * |
| * You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| * copies of the Software, and permit persons to whom the Software is |
| * furnished to do so, under the terms of the COPYING file. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| * SPDX-License-Identifier: curl |
| * |
| * RFC2195 CRAM-MD5 authentication |
| * RFC2617 Basic and Digest Access Authentication |
| * RFC2831 DIGEST-MD5 authentication |
| * RFC4422 Simple Authentication and Security Layer (SASL) |
| * RFC4616 PLAIN authentication |
| * RFC5802 SCRAM-SHA-1 authentication |
| * RFC7677 SCRAM-SHA-256 authentication |
| * RFC6749 OAuth 2.0 Authorization Framework |
| * RFC7628 A Set of SASL Mechanisms for OAuth |
| * Draft LOGIN SASL Mechanism <draft-murchison-sasl-login-00.txt> |
| * |
| ***************************************************************************/ |
| |
| #include "curl_setup.h" |
| |
| #if !defined(CURL_DISABLE_IMAP) || !defined(CURL_DISABLE_SMTP) || \ |
| !defined(CURL_DISABLE_POP3) |
| |
| #include <curl/curl.h> |
| #include "urldata.h" |
| |
| #include "curl_base64.h" |
| #include "curl_md5.h" |
| #include "vauth/vauth.h" |
| #include "vtls/vtls.h" |
| #include "curl_hmac.h" |
| #include "curl_sasl.h" |
| #include "warnless.h" |
| #include "strtok.h" |
| #include "sendf.h" |
| /* The last 3 #include files should be in this order */ |
| #include "curl_printf.h" |
| #include "curl_memory.h" |
| #include "memdebug.h" |
| |
| /* Supported mechanisms */ |
| static const struct { |
| const char *name; /* Name */ |
| size_t len; /* Name length */ |
| unsigned short bit; /* Flag bit */ |
| } mechtable[] = { |
| { "LOGIN", 5, SASL_MECH_LOGIN }, |
| { "PLAIN", 5, SASL_MECH_PLAIN }, |
| { "CRAM-MD5", 8, SASL_MECH_CRAM_MD5 }, |
| { "DIGEST-MD5", 10, SASL_MECH_DIGEST_MD5 }, |
| { "GSSAPI", 6, SASL_MECH_GSSAPI }, |
| { "EXTERNAL", 8, SASL_MECH_EXTERNAL }, |
| { "NTLM", 4, SASL_MECH_NTLM }, |
| { "XOAUTH2", 7, SASL_MECH_XOAUTH2 }, |
| { "OAUTHBEARER", 11, SASL_MECH_OAUTHBEARER }, |
| { "SCRAM-SHA-1", 11, SASL_MECH_SCRAM_SHA_1 }, |
| { "SCRAM-SHA-256",13, SASL_MECH_SCRAM_SHA_256 }, |
| { ZERO_NULL, 0, 0 } |
| }; |
| |
| /* |
| * Curl_sasl_cleanup() |
| * |
| * This is used to cleanup any libraries or curl modules used by the sasl |
| * functions. |
| * |
| * Parameters: |
| * |
| * conn [in] - The connection data. |
| * authused [in] - The authentication mechanism used. |
| */ |
| void Curl_sasl_cleanup(struct connectdata *conn, unsigned short authused) |
| { |
| (void)conn; |
| (void)authused; |
| |
| #if defined(USE_KERBEROS5) |
| /* Cleanup the gssapi structure */ |
| if(authused == SASL_MECH_GSSAPI) { |
| Curl_auth_cleanup_gssapi(&conn->krb5); |
| } |
| #endif |
| |
| #if defined(USE_GSASL) |
| /* Cleanup the GSASL structure */ |
| if(authused & (SASL_MECH_SCRAM_SHA_1 | SASL_MECH_SCRAM_SHA_256)) { |
| Curl_auth_gsasl_cleanup(&conn->gsasl); |
| } |
| #endif |
| |
| #if defined(USE_NTLM) |
| /* Cleanup the NTLM structure */ |
| if(authused == SASL_MECH_NTLM) { |
| Curl_auth_cleanup_ntlm(&conn->ntlm); |
| } |
| #endif |
| } |
| |
| /* |
| * Curl_sasl_decode_mech() |
| * |
| * Convert a SASL mechanism name into a token. |
| * |
| * Parameters: |
| * |
| * ptr [in] - The mechanism string. |
| * maxlen [in] - Maximum mechanism string length. |
| * len [out] - If not NULL, effective name length. |
| * |
| * Returns the SASL mechanism token or 0 if no match. |
| */ |
| unsigned short Curl_sasl_decode_mech(const char *ptr, size_t maxlen, |
| size_t *len) |
| { |
| unsigned int i; |
| char c; |
| |
| for(i = 0; mechtable[i].name; i++) { |
| if(maxlen >= mechtable[i].len && |
| !memcmp(ptr, mechtable[i].name, mechtable[i].len)) { |
| if(len) |
| *len = mechtable[i].len; |
| |
| if(maxlen == mechtable[i].len) |
| return mechtable[i].bit; |
| |
| c = ptr[mechtable[i].len]; |
| if(!ISUPPER(c) && !ISDIGIT(c) && c != '-' && c != '_') |
| return mechtable[i].bit; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Curl_sasl_parse_url_auth_option() |
| * |
| * Parse the URL login options. |
| */ |
| CURLcode Curl_sasl_parse_url_auth_option(struct SASL *sasl, |
| const char *value, size_t len) |
| { |
| CURLcode result = CURLE_OK; |
| size_t mechlen; |
| |
| if(!len) |
| return CURLE_URL_MALFORMAT; |
| |
| if(sasl->resetprefs) { |
| sasl->resetprefs = FALSE; |
| sasl->prefmech = SASL_AUTH_NONE; |
| } |
| |
| if(!strncmp(value, "*", len)) |
| sasl->prefmech = SASL_AUTH_DEFAULT; |
| else { |
| unsigned short mechbit = Curl_sasl_decode_mech(value, len, &mechlen); |
| if(mechbit && mechlen == len) |
| sasl->prefmech |= mechbit; |
| else |
| result = CURLE_URL_MALFORMAT; |
| } |
| |
| return result; |
| } |
| |
| /* |
| * Curl_sasl_init() |
| * |
| * Initializes the SASL structure. |
| */ |
| void Curl_sasl_init(struct SASL *sasl, struct Curl_easy *data, |
| const struct SASLproto *params) |
| { |
| unsigned long auth = data->set.httpauth; |
| |
| sasl->params = params; /* Set protocol dependent parameters */ |
| sasl->state = SASL_STOP; /* Not yet running */ |
| sasl->curmech = NULL; /* No mechanism yet. */ |
| sasl->authmechs = SASL_AUTH_NONE; /* No known authentication mechanism yet */ |
| sasl->prefmech = params->defmechs; /* Default preferred mechanisms */ |
| sasl->authused = SASL_AUTH_NONE; /* The authentication mechanism used */ |
| sasl->resetprefs = TRUE; /* Reset prefmech upon AUTH parsing. */ |
| sasl->mutual_auth = FALSE; /* No mutual authentication (GSSAPI only) */ |
| sasl->force_ir = FALSE; /* Respect external option */ |
| |
| if(auth != CURLAUTH_BASIC) { |
| sasl->resetprefs = FALSE; |
| sasl->prefmech = SASL_AUTH_NONE; |
| if(auth & CURLAUTH_BASIC) |
| sasl->prefmech |= SASL_MECH_PLAIN | SASL_MECH_LOGIN; |
| if(auth & CURLAUTH_DIGEST) |
| sasl->prefmech |= SASL_MECH_DIGEST_MD5; |
| if(auth & CURLAUTH_NTLM) |
| sasl->prefmech |= SASL_MECH_NTLM; |
| if(auth & CURLAUTH_BEARER) |
| sasl->prefmech |= SASL_MECH_OAUTHBEARER | SASL_MECH_XOAUTH2; |
| if(auth & CURLAUTH_GSSAPI) |
| sasl->prefmech |= SASL_MECH_GSSAPI; |
| } |
| } |
| |
| /* |
| * state() |
| * |
| * This is the ONLY way to change SASL state! |
| */ |
| static void state(struct SASL *sasl, struct Curl_easy *data, |
| saslstate newstate) |
| { |
| #if defined(DEBUGBUILD) && !defined(CURL_DISABLE_VERBOSE_STRINGS) |
| /* for debug purposes */ |
| static const char * const names[]={ |
| "STOP", |
| "PLAIN", |
| "LOGIN", |
| "LOGIN_PASSWD", |
| "EXTERNAL", |
| "CRAMMD5", |
| "DIGESTMD5", |
| "DIGESTMD5_RESP", |
| "NTLM", |
| "NTLM_TYPE2MSG", |
| "GSSAPI", |
| "GSSAPI_TOKEN", |
| "GSSAPI_NO_DATA", |
| "OAUTH2", |
| "OAUTH2_RESP", |
| "GSASL", |
| "CANCEL", |
| "FINAL", |
| /* LAST */ |
| }; |
| |
| if(sasl->state != newstate) |
| infof(data, "SASL %p state change from %s to %s", |
| (void *)sasl, names[sasl->state], names[newstate]); |
| #else |
| (void) data; |
| #endif |
| |
| sasl->state = newstate; |
| } |
| |
| /* Get the SASL server message and convert it to binary. */ |
| static CURLcode get_server_message(struct SASL *sasl, struct Curl_easy *data, |
| struct bufref *out) |
| { |
| CURLcode result = CURLE_OK; |
| |
| result = sasl->params->getmessage(data, out); |
| if(!result && (sasl->params->flags & SASL_FLAG_BASE64)) { |
| unsigned char *msg; |
| size_t msglen; |
| const char *serverdata = (const char *) Curl_bufref_ptr(out); |
| |
| if(!*serverdata || *serverdata == '=') |
| Curl_bufref_set(out, NULL, 0, NULL); |
| else { |
| result = Curl_base64_decode(serverdata, &msg, &msglen); |
| if(!result) |
| Curl_bufref_set(out, msg, msglen, curl_free); |
| } |
| } |
| return result; |
| } |
| |
| /* Encode the outgoing SASL message. */ |
| static CURLcode build_message(struct SASL *sasl, struct bufref *msg) |
| { |
| CURLcode result = CURLE_OK; |
| |
| if(sasl->params->flags & SASL_FLAG_BASE64) { |
| if(!Curl_bufref_ptr(msg)) /* Empty message. */ |
| Curl_bufref_set(msg, "", 0, NULL); |
| else if(!Curl_bufref_len(msg)) /* Explicit empty response. */ |
| Curl_bufref_set(msg, "=", 1, NULL); |
| else { |
| char *base64; |
| size_t base64len; |
| |
| result = Curl_base64_encode((const char *) Curl_bufref_ptr(msg), |
| Curl_bufref_len(msg), &base64, &base64len); |
| if(!result) |
| Curl_bufref_set(msg, base64, base64len, curl_free); |
| } |
| } |
| |
| return result; |
| } |
| |
| /* |
| * Curl_sasl_can_authenticate() |
| * |
| * Check if we have enough auth data and capabilities to authenticate. |
| */ |
| bool Curl_sasl_can_authenticate(struct SASL *sasl, struct Curl_easy *data) |
| { |
| /* Have credentials been provided? */ |
| if(data->state.aptr.user) |
| return TRUE; |
| |
| /* EXTERNAL can authenticate without a user name and/or password */ |
| if(sasl->authmechs & sasl->prefmech & SASL_MECH_EXTERNAL) |
| return TRUE; |
| |
| return FALSE; |
| } |
| |
| /* |
| * Curl_sasl_start() |
| * |
| * Calculate the required login details for SASL authentication. |
| */ |
| CURLcode Curl_sasl_start(struct SASL *sasl, struct Curl_easy *data, |
| bool force_ir, saslprogress *progress) |
| { |
| CURLcode result = CURLE_OK; |
| struct connectdata *conn = data->conn; |
| unsigned short enabledmechs; |
| const char *mech = NULL; |
| struct bufref resp; |
| saslstate state1 = SASL_STOP; |
| saslstate state2 = SASL_FINAL; |
| const char * const hostname = SSL_HOST_NAME(); |
| const long int port = SSL_HOST_PORT(); |
| #if defined(USE_KERBEROS5) || defined(USE_NTLM) |
| const char *service = data->set.str[STRING_SERVICE_NAME] ? |
| data->set.str[STRING_SERVICE_NAME] : |
| sasl->params->service; |
| #endif |
| const char *oauth_bearer = data->set.str[STRING_BEARER]; |
| struct bufref nullmsg; |
| |
| Curl_bufref_init(&nullmsg); |
| Curl_bufref_init(&resp); |
| sasl->force_ir = force_ir; /* Latch for future use */ |
| sasl->authused = 0; /* No mechanism used yet */ |
| enabledmechs = sasl->authmechs & sasl->prefmech; |
| *progress = SASL_IDLE; |
| |
| /* Calculate the supported authentication mechanism, by decreasing order of |
| security, as well as the initial response where appropriate */ |
| if((enabledmechs & SASL_MECH_EXTERNAL) && !conn->passwd[0]) { |
| mech = SASL_MECH_STRING_EXTERNAL; |
| state1 = SASL_EXTERNAL; |
| sasl->authused = SASL_MECH_EXTERNAL; |
| |
| if(force_ir || data->set.sasl_ir) |
| result = Curl_auth_create_external_message(conn->user, &resp); |
| } |
| else if(data->state.aptr.user) { |
| #if defined(USE_KERBEROS5) |
| if((enabledmechs & SASL_MECH_GSSAPI) && Curl_auth_is_gssapi_supported() && |
| Curl_auth_user_contains_domain(conn->user)) { |
| sasl->mutual_auth = FALSE; |
| mech = SASL_MECH_STRING_GSSAPI; |
| state1 = SASL_GSSAPI; |
| state2 = SASL_GSSAPI_TOKEN; |
| sasl->authused = SASL_MECH_GSSAPI; |
| |
| if(force_ir || data->set.sasl_ir) |
| result = Curl_auth_create_gssapi_user_message(data, conn->user, |
| conn->passwd, |
| service, |
| conn->host.name, |
| sasl->mutual_auth, |
| NULL, &conn->krb5, |
| &resp); |
| } |
| else |
| #endif |
| #ifdef USE_GSASL |
| if((enabledmechs & SASL_MECH_SCRAM_SHA_256) && |
| Curl_auth_gsasl_is_supported(data, SASL_MECH_STRING_SCRAM_SHA_256, |
| &conn->gsasl)) { |
| mech = SASL_MECH_STRING_SCRAM_SHA_256; |
| sasl->authused = SASL_MECH_SCRAM_SHA_256; |
| state1 = SASL_GSASL; |
| state2 = SASL_GSASL; |
| |
| result = Curl_auth_gsasl_start(data, conn->user, |
| conn->passwd, &conn->gsasl); |
| if(result == CURLE_OK && (force_ir || data->set.sasl_ir)) |
| result = Curl_auth_gsasl_token(data, &nullmsg, &conn->gsasl, &resp); |
| } |
| else if((enabledmechs & SASL_MECH_SCRAM_SHA_1) && |
| Curl_auth_gsasl_is_supported(data, SASL_MECH_STRING_SCRAM_SHA_1, |
| &conn->gsasl)) { |
| mech = SASL_MECH_STRING_SCRAM_SHA_1; |
| sasl->authused = SASL_MECH_SCRAM_SHA_1; |
| state1 = SASL_GSASL; |
| state2 = SASL_GSASL; |
| |
| result = Curl_auth_gsasl_start(data, conn->user, |
| conn->passwd, &conn->gsasl); |
| if(result == CURLE_OK && (force_ir || data->set.sasl_ir)) |
| result = Curl_auth_gsasl_token(data, &nullmsg, &conn->gsasl, &resp); |
| } |
| else |
| #endif |
| #ifndef CURL_DISABLE_CRYPTO_AUTH |
| if((enabledmechs & SASL_MECH_DIGEST_MD5) && |
| Curl_auth_is_digest_supported()) { |
| mech = SASL_MECH_STRING_DIGEST_MD5; |
| state1 = SASL_DIGESTMD5; |
| sasl->authused = SASL_MECH_DIGEST_MD5; |
| } |
| else if(enabledmechs & SASL_MECH_CRAM_MD5) { |
| mech = SASL_MECH_STRING_CRAM_MD5; |
| state1 = SASL_CRAMMD5; |
| sasl->authused = SASL_MECH_CRAM_MD5; |
| } |
| else |
| #endif |
| #ifdef USE_NTLM |
| if((enabledmechs & SASL_MECH_NTLM) && Curl_auth_is_ntlm_supported()) { |
| mech = SASL_MECH_STRING_NTLM; |
| state1 = SASL_NTLM; |
| state2 = SASL_NTLM_TYPE2MSG; |
| sasl->authused = SASL_MECH_NTLM; |
| |
| if(force_ir || data->set.sasl_ir) |
| result = Curl_auth_create_ntlm_type1_message(data, |
| conn->user, conn->passwd, |
| service, |
| hostname, |
| &conn->ntlm, &resp); |
| } |
| else |
| #endif |
| if((enabledmechs & SASL_MECH_OAUTHBEARER) && oauth_bearer) { |
| mech = SASL_MECH_STRING_OAUTHBEARER; |
| state1 = SASL_OAUTH2; |
| state2 = SASL_OAUTH2_RESP; |
| sasl->authused = SASL_MECH_OAUTHBEARER; |
| |
| if(force_ir || data->set.sasl_ir) |
| result = Curl_auth_create_oauth_bearer_message(conn->user, |
| hostname, |
| port, |
| oauth_bearer, |
| &resp); |
| } |
| else if((enabledmechs & SASL_MECH_XOAUTH2) && oauth_bearer) { |
| mech = SASL_MECH_STRING_XOAUTH2; |
| state1 = SASL_OAUTH2; |
| sasl->authused = SASL_MECH_XOAUTH2; |
| |
| if(force_ir || data->set.sasl_ir) |
| result = Curl_auth_create_xoauth_bearer_message(conn->user, |
| oauth_bearer, |
| &resp); |
| } |
| else if(enabledmechs & SASL_MECH_PLAIN) { |
| mech = SASL_MECH_STRING_PLAIN; |
| state1 = SASL_PLAIN; |
| sasl->authused = SASL_MECH_PLAIN; |
| |
| if(force_ir || data->set.sasl_ir) |
| result = Curl_auth_create_plain_message(conn->sasl_authzid, |
| conn->user, conn->passwd, |
| &resp); |
| } |
| else if(enabledmechs & SASL_MECH_LOGIN) { |
| mech = SASL_MECH_STRING_LOGIN; |
| state1 = SASL_LOGIN; |
| state2 = SASL_LOGIN_PASSWD; |
| sasl->authused = SASL_MECH_LOGIN; |
| |
| if(force_ir || data->set.sasl_ir) |
| result = Curl_auth_create_login_message(conn->user, &resp); |
| } |
| } |
| |
| if(!result && mech) { |
| sasl->curmech = mech; |
| if(Curl_bufref_ptr(&resp)) |
| result = build_message(sasl, &resp); |
| |
| if(sasl->params->maxirlen && |
| strlen(mech) + Curl_bufref_len(&resp) > sasl->params->maxirlen) |
| Curl_bufref_free(&resp); |
| |
| if(!result) |
| result = sasl->params->sendauth(data, mech, &resp); |
| |
| if(!result) { |
| *progress = SASL_INPROGRESS; |
| state(sasl, data, Curl_bufref_ptr(&resp) ? state2 : state1); |
| } |
| } |
| |
| Curl_bufref_free(&resp); |
| return result; |
| } |
| |
| /* |
| * Curl_sasl_continue() |
| * |
| * Continue the authentication. |
| */ |
| CURLcode Curl_sasl_continue(struct SASL *sasl, struct Curl_easy *data, |
| int code, saslprogress *progress) |
| { |
| CURLcode result = CURLE_OK; |
| struct connectdata *conn = data->conn; |
| saslstate newstate = SASL_FINAL; |
| struct bufref resp; |
| const char * const hostname = SSL_HOST_NAME(); |
| const long int port = SSL_HOST_PORT(); |
| #if !defined(CURL_DISABLE_CRYPTO_AUTH) || defined(USE_KERBEROS5) || \ |
| defined(USE_NTLM) |
| const char *service = data->set.str[STRING_SERVICE_NAME] ? |
| data->set.str[STRING_SERVICE_NAME] : |
| sasl->params->service; |
| #endif |
| const char *oauth_bearer = data->set.str[STRING_BEARER]; |
| struct bufref serverdata; |
| |
| Curl_bufref_init(&serverdata); |
| Curl_bufref_init(&resp); |
| *progress = SASL_INPROGRESS; |
| |
| if(sasl->state == SASL_FINAL) { |
| if(code != sasl->params->finalcode) |
| result = CURLE_LOGIN_DENIED; |
| *progress = SASL_DONE; |
| state(sasl, data, SASL_STOP); |
| return result; |
| } |
| |
| if(sasl->state != SASL_CANCEL && sasl->state != SASL_OAUTH2_RESP && |
| code != sasl->params->contcode) { |
| *progress = SASL_DONE; |
| state(sasl, data, SASL_STOP); |
| return CURLE_LOGIN_DENIED; |
| } |
| |
| switch(sasl->state) { |
| case SASL_STOP: |
| *progress = SASL_DONE; |
| return result; |
| case SASL_PLAIN: |
| result = Curl_auth_create_plain_message(conn->sasl_authzid, |
| conn->user, conn->passwd, &resp); |
| break; |
| case SASL_LOGIN: |
| result = Curl_auth_create_login_message(conn->user, &resp); |
| newstate = SASL_LOGIN_PASSWD; |
| break; |
| case SASL_LOGIN_PASSWD: |
| result = Curl_auth_create_login_message(conn->passwd, &resp); |
| break; |
| case SASL_EXTERNAL: |
| result = Curl_auth_create_external_message(conn->user, &resp); |
| break; |
| #ifndef CURL_DISABLE_CRYPTO_AUTH |
| #ifdef USE_GSASL |
| case SASL_GSASL: |
| result = get_server_message(sasl, data, &serverdata); |
| if(!result) |
| result = Curl_auth_gsasl_token(data, &serverdata, &conn->gsasl, &resp); |
| if(!result && Curl_bufref_len(&resp) > 0) |
| newstate = SASL_GSASL; |
| break; |
| #endif |
| case SASL_CRAMMD5: |
| result = get_server_message(sasl, data, &serverdata); |
| if(!result) |
| result = Curl_auth_create_cram_md5_message(&serverdata, conn->user, |
| conn->passwd, &resp); |
| break; |
| case SASL_DIGESTMD5: |
| result = get_server_message(sasl, data, &serverdata); |
| if(!result) |
| result = Curl_auth_create_digest_md5_message(data, &serverdata, |
| conn->user, conn->passwd, |
| service, &resp); |
| if(!result && (sasl->params->flags & SASL_FLAG_BASE64)) |
| newstate = SASL_DIGESTMD5_RESP; |
| break; |
| case SASL_DIGESTMD5_RESP: |
| /* Keep response NULL to output an empty line. */ |
| break; |
| #endif |
| |
| #ifdef USE_NTLM |
| case SASL_NTLM: |
| /* Create the type-1 message */ |
| result = Curl_auth_create_ntlm_type1_message(data, |
| conn->user, conn->passwd, |
| service, hostname, |
| &conn->ntlm, &resp); |
| newstate = SASL_NTLM_TYPE2MSG; |
| break; |
| case SASL_NTLM_TYPE2MSG: |
| /* Decode the type-2 message */ |
| result = get_server_message(sasl, data, &serverdata); |
| if(!result) |
| result = Curl_auth_decode_ntlm_type2_message(data, &serverdata, |
| &conn->ntlm); |
| if(!result) |
| result = Curl_auth_create_ntlm_type3_message(data, conn->user, |
| conn->passwd, &conn->ntlm, |
| &resp); |
| break; |
| #endif |
| |
| #if defined(USE_KERBEROS5) |
| case SASL_GSSAPI: |
| result = Curl_auth_create_gssapi_user_message(data, conn->user, |
| conn->passwd, |
| service, |
| conn->host.name, |
| sasl->mutual_auth, NULL, |
| &conn->krb5, |
| &resp); |
| newstate = SASL_GSSAPI_TOKEN; |
| break; |
| case SASL_GSSAPI_TOKEN: |
| result = get_server_message(sasl, data, &serverdata); |
| if(!result) { |
| if(sasl->mutual_auth) { |
| /* Decode the user token challenge and create the optional response |
| message */ |
| result = Curl_auth_create_gssapi_user_message(data, NULL, NULL, |
| NULL, NULL, |
| sasl->mutual_auth, |
| &serverdata, |
| &conn->krb5, |
| &resp); |
| newstate = SASL_GSSAPI_NO_DATA; |
| } |
| else |
| /* Decode the security challenge and create the response message */ |
| result = Curl_auth_create_gssapi_security_message(data, |
| conn->sasl_authzid, |
| &serverdata, |
| &conn->krb5, |
| &resp); |
| } |
| break; |
| case SASL_GSSAPI_NO_DATA: |
| /* Decode the security challenge and create the response message */ |
| result = get_server_message(sasl, data, &serverdata); |
| if(!result) |
| result = Curl_auth_create_gssapi_security_message(data, |
| conn->sasl_authzid, |
| &serverdata, |
| &conn->krb5, |
| &resp); |
| break; |
| #endif |
| |
| case SASL_OAUTH2: |
| /* Create the authorization message */ |
| if(sasl->authused == SASL_MECH_OAUTHBEARER) { |
| result = Curl_auth_create_oauth_bearer_message(conn->user, |
| hostname, |
| port, |
| oauth_bearer, |
| &resp); |
| |
| /* Failures maybe sent by the server as continuations for OAUTHBEARER */ |
| newstate = SASL_OAUTH2_RESP; |
| } |
| else |
| result = Curl_auth_create_xoauth_bearer_message(conn->user, |
| oauth_bearer, |
| &resp); |
| break; |
| |
| case SASL_OAUTH2_RESP: |
| /* The continuation is optional so check the response code */ |
| if(code == sasl->params->finalcode) { |
| /* Final response was received so we are done */ |
| *progress = SASL_DONE; |
| state(sasl, data, SASL_STOP); |
| return result; |
| } |
| else if(code == sasl->params->contcode) { |
| /* Acknowledge the continuation by sending a 0x01 response. */ |
| Curl_bufref_set(&resp, "\x01", 1, NULL); |
| break; |
| } |
| else { |
| *progress = SASL_DONE; |
| state(sasl, data, SASL_STOP); |
| return CURLE_LOGIN_DENIED; |
| } |
| |
| case SASL_CANCEL: |
| /* Remove the offending mechanism from the supported list */ |
| sasl->authmechs ^= sasl->authused; |
| |
| /* Start an alternative SASL authentication */ |
| return Curl_sasl_start(sasl, data, sasl->force_ir, progress); |
| default: |
| failf(data, "Unsupported SASL authentication mechanism"); |
| result = CURLE_UNSUPPORTED_PROTOCOL; /* Should not happen */ |
| break; |
| } |
| |
| Curl_bufref_free(&serverdata); |
| |
| switch(result) { |
| case CURLE_BAD_CONTENT_ENCODING: |
| /* Cancel dialog */ |
| result = sasl->params->cancelauth(data, sasl->curmech); |
| newstate = SASL_CANCEL; |
| break; |
| case CURLE_OK: |
| result = build_message(sasl, &resp); |
| if(!result) |
| result = sasl->params->contauth(data, sasl->curmech, &resp); |
| break; |
| default: |
| newstate = SASL_STOP; /* Stop on error */ |
| *progress = SASL_DONE; |
| break; |
| } |
| |
| Curl_bufref_free(&resp); |
| |
| state(sasl, data, newstate); |
| |
| return result; |
| } |
| #endif /* protocols are enabled that use SASL */ |