| /* | 
 |  *  linux/fs/ext4/file.c | 
 |  * | 
 |  * Copyright (C) 1992, 1993, 1994, 1995 | 
 |  * Remy Card (card@masi.ibp.fr) | 
 |  * Laboratoire MASI - Institut Blaise Pascal | 
 |  * Universite Pierre et Marie Curie (Paris VI) | 
 |  * | 
 |  *  from | 
 |  * | 
 |  *  linux/fs/minix/file.c | 
 |  * | 
 |  *  Copyright (C) 1991, 1992  Linus Torvalds | 
 |  * | 
 |  *  ext4 fs regular file handling primitives | 
 |  * | 
 |  *  64-bit file support on 64-bit platforms by Jakub Jelinek | 
 |  *	(jj@sunsite.ms.mff.cuni.cz) | 
 |  */ | 
 |  | 
 | #include <linux/time.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/jbd2.h> | 
 | #include <linux/mount.h> | 
 | #include <linux/path.h> | 
 | #include <linux/quotaops.h> | 
 | #include "ext4.h" | 
 | #include "ext4_jbd2.h" | 
 | #include "xattr.h" | 
 | #include "acl.h" | 
 |  | 
 | /* | 
 |  * Called when an inode is released. Note that this is different | 
 |  * from ext4_file_open: open gets called at every open, but release | 
 |  * gets called only when /all/ the files are closed. | 
 |  */ | 
 | static int ext4_release_file(struct inode *inode, struct file *filp) | 
 | { | 
 | 	if (ext4_test_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE)) { | 
 | 		ext4_alloc_da_blocks(inode); | 
 | 		ext4_clear_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE); | 
 | 	} | 
 | 	/* if we are the last writer on the inode, drop the block reservation */ | 
 | 	if ((filp->f_mode & FMODE_WRITE) && | 
 | 			(atomic_read(&inode->i_writecount) == 1) && | 
 | 		        !EXT4_I(inode)->i_reserved_data_blocks) | 
 | 	{ | 
 | 		down_write(&EXT4_I(inode)->i_data_sem); | 
 | 		ext4_discard_preallocations(inode); | 
 | 		up_write(&EXT4_I(inode)->i_data_sem); | 
 | 	} | 
 | 	if (is_dx(inode) && filp->private_data) | 
 | 		ext4_htree_free_dir_info(filp->private_data); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void ext4_aiodio_wait(struct inode *inode) | 
 | { | 
 | 	wait_queue_head_t *wq = ext4_ioend_wq(inode); | 
 |  | 
 | 	wait_event(*wq, (atomic_read(&EXT4_I(inode)->i_aiodio_unwritten) == 0)); | 
 | } | 
 |  | 
 | /* | 
 |  * This tests whether the IO in question is block-aligned or not. | 
 |  * Ext4 utilizes unwritten extents when hole-filling during direct IO, and they | 
 |  * are converted to written only after the IO is complete.  Until they are | 
 |  * mapped, these blocks appear as holes, so dio_zero_block() will assume that | 
 |  * it needs to zero out portions of the start and/or end block.  If 2 AIO | 
 |  * threads are at work on the same unwritten block, they must be synchronized | 
 |  * or one thread will zero the other's data, causing corruption. | 
 |  */ | 
 | static int | 
 | ext4_unaligned_aio(struct inode *inode, const struct iovec *iov, | 
 | 		   unsigned long nr_segs, loff_t pos) | 
 | { | 
 | 	struct super_block *sb = inode->i_sb; | 
 | 	int blockmask = sb->s_blocksize - 1; | 
 | 	size_t count = iov_length(iov, nr_segs); | 
 | 	loff_t final_size = pos + count; | 
 |  | 
 | 	if (pos >= i_size_read(inode)) | 
 | 		return 0; | 
 |  | 
 | 	if ((pos & blockmask) || (final_size & blockmask)) | 
 | 		return 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t | 
 | ext4_file_write(struct kiocb *iocb, const struct iovec *iov, | 
 | 		unsigned long nr_segs, loff_t pos) | 
 | { | 
 | 	struct inode *inode = iocb->ki_filp->f_path.dentry->d_inode; | 
 | 	int unaligned_aio = 0; | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * If we have encountered a bitmap-format file, the size limit | 
 | 	 * is smaller than s_maxbytes, which is for extent-mapped files. | 
 | 	 */ | 
 |  | 
 | 	if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) { | 
 | 		struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | 
 | 		size_t length = iov_length(iov, nr_segs); | 
 |  | 
 | 		if ((pos > sbi->s_bitmap_maxbytes || | 
 | 		    (pos == sbi->s_bitmap_maxbytes && length > 0))) | 
 | 			return -EFBIG; | 
 |  | 
 | 		if (pos + length > sbi->s_bitmap_maxbytes) { | 
 | 			nr_segs = iov_shorten((struct iovec *)iov, nr_segs, | 
 | 					      sbi->s_bitmap_maxbytes - pos); | 
 | 		} | 
 | 	} else if (unlikely((iocb->ki_filp->f_flags & O_DIRECT) && | 
 | 		   !is_sync_kiocb(iocb))) { | 
 | 		unaligned_aio = ext4_unaligned_aio(inode, iov, nr_segs, pos); | 
 | 	} | 
 |  | 
 | 	/* Unaligned direct AIO must be serialized; see comment above */ | 
 | 	if (unaligned_aio) { | 
 | 		static unsigned long unaligned_warn_time; | 
 |  | 
 | 		/* Warn about this once per day */ | 
 | 		if (printk_timed_ratelimit(&unaligned_warn_time, 60*60*24*HZ)) | 
 | 			ext4_msg(inode->i_sb, KERN_WARNING, | 
 | 				 "Unaligned AIO/DIO on inode %ld by %s; " | 
 | 				 "performance will be poor.", | 
 | 				 inode->i_ino, current->comm); | 
 | 		mutex_lock(ext4_aio_mutex(inode)); | 
 | 		ext4_aiodio_wait(inode); | 
 | 	} | 
 |  | 
 | 	ret = generic_file_aio_write(iocb, iov, nr_segs, pos); | 
 |  | 
 | 	if (unaligned_aio) | 
 | 		mutex_unlock(ext4_aio_mutex(inode)); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct vm_operations_struct ext4_file_vm_ops = { | 
 | 	.fault		= filemap_fault, | 
 | 	.page_mkwrite   = ext4_page_mkwrite, | 
 | }; | 
 |  | 
 | static int ext4_file_mmap(struct file *file, struct vm_area_struct *vma) | 
 | { | 
 | 	struct address_space *mapping = file->f_mapping; | 
 |  | 
 | 	if (!mapping->a_ops->readpage) | 
 | 		return -ENOEXEC; | 
 | 	file_accessed(file); | 
 | 	vma->vm_ops = &ext4_file_vm_ops; | 
 | 	vma->vm_flags |= VM_CAN_NONLINEAR; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ext4_file_open(struct inode * inode, struct file * filp) | 
 | { | 
 | 	struct super_block *sb = inode->i_sb; | 
 | 	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | 
 | 	struct ext4_inode_info *ei = EXT4_I(inode); | 
 | 	struct vfsmount *mnt = filp->f_path.mnt; | 
 | 	struct path path; | 
 | 	char buf[64], *cp; | 
 |  | 
 | 	if (unlikely(!(sbi->s_mount_flags & EXT4_MF_MNTDIR_SAMPLED) && | 
 | 		     !(sb->s_flags & MS_RDONLY))) { | 
 | 		sbi->s_mount_flags |= EXT4_MF_MNTDIR_SAMPLED; | 
 | 		/* | 
 | 		 * Sample where the filesystem has been mounted and | 
 | 		 * store it in the superblock for sysadmin convenience | 
 | 		 * when trying to sort through large numbers of block | 
 | 		 * devices or filesystem images. | 
 | 		 */ | 
 | 		memset(buf, 0, sizeof(buf)); | 
 | 		path.mnt = mnt; | 
 | 		path.dentry = mnt->mnt_root; | 
 | 		cp = d_path(&path, buf, sizeof(buf)); | 
 | 		if (!IS_ERR(cp)) { | 
 | 			strlcpy(sbi->s_es->s_last_mounted, cp, | 
 | 				sizeof(sbi->s_es->s_last_mounted)); | 
 | 			ext4_mark_super_dirty(sb); | 
 | 		} | 
 | 	} | 
 | 	/* | 
 | 	 * Set up the jbd2_inode if we are opening the inode for | 
 | 	 * writing and the journal is present | 
 | 	 */ | 
 | 	if (sbi->s_journal && !ei->jinode && (filp->f_mode & FMODE_WRITE)) { | 
 | 		struct jbd2_inode *jinode = jbd2_alloc_inode(GFP_KERNEL); | 
 |  | 
 | 		spin_lock(&inode->i_lock); | 
 | 		if (!ei->jinode) { | 
 | 			if (!jinode) { | 
 | 				spin_unlock(&inode->i_lock); | 
 | 				return -ENOMEM; | 
 | 			} | 
 | 			ei->jinode = jinode; | 
 | 			jbd2_journal_init_jbd_inode(ei->jinode, inode); | 
 | 			jinode = NULL; | 
 | 		} | 
 | 		spin_unlock(&inode->i_lock); | 
 | 		if (unlikely(jinode != NULL)) | 
 | 			jbd2_free_inode(jinode); | 
 | 	} | 
 | 	return dquot_file_open(inode, filp); | 
 | } | 
 |  | 
 | /* | 
 |  * ext4_llseek() copied from generic_file_llseek() to handle both | 
 |  * block-mapped and extent-mapped maxbytes values. This should | 
 |  * otherwise be identical with generic_file_llseek(). | 
 |  */ | 
 | loff_t ext4_llseek(struct file *file, loff_t offset, int origin) | 
 | { | 
 | 	struct inode *inode = file->f_mapping->host; | 
 | 	loff_t maxbytes; | 
 |  | 
 | 	if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) | 
 | 		maxbytes = EXT4_SB(inode->i_sb)->s_bitmap_maxbytes; | 
 | 	else | 
 | 		maxbytes = inode->i_sb->s_maxbytes; | 
 |  | 
 | 	return generic_file_llseek_size(file, offset, origin, maxbytes); | 
 | } | 
 |  | 
 | const struct file_operations ext4_file_operations = { | 
 | 	.llseek		= ext4_llseek, | 
 | 	.read		= do_sync_read, | 
 | 	.write		= do_sync_write, | 
 | 	.aio_read	= generic_file_aio_read, | 
 | 	.aio_write	= ext4_file_write, | 
 | 	.unlocked_ioctl = ext4_ioctl, | 
 | #ifdef CONFIG_COMPAT | 
 | 	.compat_ioctl	= ext4_compat_ioctl, | 
 | #endif | 
 | 	.mmap		= ext4_file_mmap, | 
 | 	.open		= ext4_file_open, | 
 | 	.release	= ext4_release_file, | 
 | 	.fsync		= ext4_sync_file, | 
 | 	.splice_read	= generic_file_splice_read, | 
 | 	.splice_write	= generic_file_splice_write, | 
 | 	.fallocate	= ext4_fallocate, | 
 | }; | 
 |  | 
 | const struct inode_operations ext4_file_inode_operations = { | 
 | 	.setattr	= ext4_setattr, | 
 | 	.getattr	= ext4_getattr, | 
 | #ifdef CONFIG_EXT4_FS_XATTR | 
 | 	.setxattr	= generic_setxattr, | 
 | 	.getxattr	= generic_getxattr, | 
 | 	.listxattr	= ext4_listxattr, | 
 | 	.removexattr	= generic_removexattr, | 
 | #endif | 
 | 	.get_acl	= ext4_get_acl, | 
 | 	.fiemap		= ext4_fiemap, | 
 | }; | 
 |  |