ap/app/iptables/libipq/libipq.3 - T106_DC - Gitiles

 .TH LIBIPQ 3 "16 October 2001" "Linux iptables 1.2" "Linux Programmer's Manual"
 .\"
 .\" $Id: libipq.3,v 1.4 2001/10/16 16:58:25 jamesm Exp $
 .\"
 .\"     Copyright (c) 2000-2001 Netfilter Core Team
 .\"
 .\"     This program is free software; you can redistribute it and/or modify
 .\"     it under the terms of the GNU General Public License as published by
 .\"     the Free Software Foundation; either version 2 of the License, or
 .\"     (at your option) any later version.
 .\"
 .\"     This program is distributed in the hope that it will be useful,
 .\"     but WITHOUT ANY WARRANTY; without even the implied warranty of
 .\"     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 .\"     GNU General Public License for more details.
 .\"
 .\"     You should have received a copy of the GNU General Public License
 .\"     along with this program; if not, write to the Free Software
 .\"     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 .\"
 .\"
 .SH NAME
 libipq \- iptables userspace packet queuing library.
 .SH SYNOPSIS
 .B #include <linux/netfilter.h>
 .br
 .B #include <libipq.h>
 .SH DESCRIPTION
 libipq is a development library for iptables userspace packet queuing.
 .SS Userspace Packet Queuing
 Netfilter provides a mechanism for passing packets out of the stack for
 queueing to userspace, then receiving these packets back into the kernel
 with a verdict specifying what to do with the packets (such as ACCEPT
 or DROP).  These packets may also be modified in userspace prior to
 reinjection back into the kernel.
 .PP
 For each supported protocol, a kernel module called a
 .I queue handler
 may register with Netfilter to perform the mechanics of passing
 packets to and from userspace.
 .PP
 The standard queue handler for IPv4 is ip_queue.  It is provided as an
 experimental module with 2.4 kernels, and uses a Netlink socket for
 kernel/userspace communication.
 .PP
 Once ip_queue is loaded, IP packets may be selected with iptables
 and queued for userspace processing via the QUEUE target.  For example,
 running the following commands:
 .PP
 	# modprobe iptable_filter
 .br
 	# modprobe ip_queue
 .br
 	# iptables -A OUTPUT -p icmp -j QUEUE
 .PP
 will cause any locally generated ICMP packets (e.g. ping output) to
 be sent to the ip_queue module, which will then attempt to deliver the
 packets to a userspace application.  If no userspace application is waiting,
 the packets will be dropped
 .PP
 An application may receive and process these packets via libipq.
 .PP
 .PP
 .SS Libipq Overview
 Libipq provides an API for communicating with ip_queue.  The following is
 an overview of API usage, refer to individual man pages for more details
 on each function.
 .PP
 .B Initialisation
 .br
 To initialise the library, call
 .BR ipq_create_handle (3).
 This will attempt to bind to the Netlink socket used by ip_queue and
 return an opaque context handle for subsequent library calls.
 .PP
 .B Setting the Queue Mode
 .br
 .BR ipq_set_mode (3)
 allows the application to specify whether packet metadata, or packet
 payloads as well as metadata are copied to userspace.  It is also used to
 initially notify ip_queue that an application is ready to receive queue
 messages.
 .PP
 .B Receiving Packets from the Queue
 .br
 .BR ipq_read (3)
 waits for queue messages to arrive from ip_queue and copies
 them into a supplied buffer.
 Queue messages may be
 .I packet messages
 or
 .I error messages.
 .PP
 The type of packet may be determined with
 .BR ipq_message_type (3).
 .PP
 If it's a packet message, the metadata and optional payload may be retrieved with
 .BR ipq_get_packet (3).
 .PP
 To retrieve the value of an error message, use
 .BR ipq_get_msgerr (3).
 .PP
 .B Issuing Verdicts on Packets
 .br
 To issue a verdict on a packet, and optionally return a modified version
 of the packet to the kernel, call
 .BR ipq_set_verdict (3).
 .PP
 .B Error Handling
 .br
 An error string corresponding to the current value of the internal error
 variable
 .B ipq_errno
 may be obtained with
 .BR ipq_errstr (3).
 .PP
 For simple applications, calling
 .BR ipq_perror (3)
 will print the same message as
 .BR ipq_errstr (3),
 as well as the string corresponding to the global
 .B errno
 value (if set) to stderr.
 .PP
 .B Cleaning Up
 .br
 To free up the Netlink socket and destroy resources associated with
 the context handle, call
 .BR ipq_destroy_handle (3).
 .SH SUMMARY
 .TP 4
 .BR ipq_create_handle (3)
 Initialise library, return context handle.
 .TP
 .BR ipq_set_mode (3)
 Set the queue mode, to copy either packet metadata, or payloads
 as well as metadata to userspace.
 .TP
 .BR ipq_read (3)
 Wait for a queue message to arrive from ip_queue and read it into
 a buffer.
 .TP
 .BR ipq_message_type (3)
 Determine message type in the buffer.
 .TP
 .BR ipq_get_packet (3)
 Retrieve a packet message from the buffer.
 .TP
 .BR ipq_get_msgerr (3)
 Retrieve an error message from the buffer.
 .TP
 .BR ipq_set_verdict (3)
 Set a verdict on a packet, optionally replacing its contents.
 .TP
 .BR ipq_errstr (3)
 Return an error message corresponding to the internal ipq_errno variable.
 .TP
 .BR ipq_perror (3)
 Helper function to print error messages to stderr.
 .TP
 .BR ipq_destroy_handle (3)
 Destroy context handle and associated resources.
 .SH EXAMPLE
 The following is an example of a simple application which receives
 packets and issues NF_ACCEPT verdicts on each packet.
 .RS
 .nf
 /*
  * This code is GPL.
  */
 #include <linux/netfilter.h>
 #include <libipq.h>
 #include <stdio.h>

 #define BUFSIZE 2048

 static void die(struct ipq_handle *h)
 {
 	ipq_perror("passer");
 	ipq_destroy_handle(h);
 	exit(1);
 }

 int main(int argc, char **argv)
 {
 	int status;
 	unsigned char buf[BUFSIZE];
 	struct ipq_handle *h;

 	h = ipq_create_handle(0, NFPROTO_IPV4);
 	if (!h)
 		die(h);

 	status = ipq_set_mode(h, IPQ_COPY_PACKET, BUFSIZE);
 	if (status < 0)
 		die(h);

 	do{
 		status = ipq_read(h, buf, BUFSIZE, 0);
 		if (status < 0)
 			die(h);

 		switch (ipq_message_type(buf)) {
 			case NLMSG_ERROR:
 				fprintf(stderr, "Received error message %d\\n",
 				        ipq_get_msgerr(buf));
 				break;

 			case IPQM_PACKET: {
 				ipq_packet_msg_t *m = ipq_get_packet(buf);

 				status = ipq_set_verdict(h, m->packet_id,
 				                         NF_ACCEPT, 0, NULL);
 				if (status < 0)
 					die(h);
 				break;
 			}

 			default:
 				fprintf(stderr, "Unknown message type!\\n");
 				break;
 		}
 	} while (1);

 	ipq_destroy_handle(h);
 	return 0;
 }
 .RE
 .fi
 .PP
 Pointers to more libipq application examples may be found in The
 Netfilter FAQ.
 .SH DIAGNOSTICS
 For information about monitoring and tuning ip_queue, refer to the
 Linux 2.4 Packet Filtering HOWTO.
 .PP
 If an application modifies a packet, it needs to also update any
 checksums for the packet.  Typically, the kernel will silently discard
 modified packets with invalid checksums.
 .SH SECURITY
 Processes require CAP_NET_ADMIN capabilty to access the kernel ip_queue
 module.  Such processes can potentially access and modify any IP packets
 received, generated or forwarded by the kernel.
 .SH TODO
 Per-handle
 .B ipq_errno
 values.
 .SH BUGS
 Probably.
 .SH AUTHOR
 James Morris <jmorris@intercode.com.au>
 .SH COPYRIGHT
 Copyright (c) 2000-2001 Netfilter Core Team.
 .PP
 Distributed under the GNU General Public License.
 .SH CREDITS
 Joost Remijn implemented the
 .B ipq_read
 timeout feature, which appeared in the 1.2.4 release of iptables.
 .PP
 Fernando Anton added support for IPv6.
 .SH SEE ALSO
 .BR iptables (8),
 .BR ipq_create_handle (3),
 .BR ipq_destroy_handle (3),
 .BR ipq_errstr (3),
 .BR ipq_get_msgerr (3),
 .BR ipq_get_packet (3),
 .BR ipq_message_type (3),
 .BR ipq_perror (3),
 .BR ipq_read (3),
 .BR ipq_set_mode (3),
 .BR ipq_set_verdict (3).
 .PP
 The Netfilter home page at http://netfilter.samba.org/
 which has links to The Networking Concepts HOWTO, The Linux 2.4 Packet
 Filtering HOWTO, The Linux 2.4 NAT HOWTO, The Netfilter Hacking HOWTO,
 The Netfilter FAQ and many other useful resources.
	.TH LIBIPQ 3 "16 October 2001" "Linux iptables 1.2" "Linux Programmer's Manual"
	.\"
	.\" $Id: libipq.3,v 1.4 2001/10/16 16:58:25 jamesm Exp $
	.\"
	.\" Copyright (c) 2000-2001 Netfilter Core Team
	.\"
	.\" This program is free software; you can redistribute it and/or modify
	.\" it under the terms of the GNU General Public License as published by
	.\" the Free Software Foundation; either version 2 of the License, or
	.\" (at your option) any later version.
	.\"
	.\" This program is distributed in the hope that it will be useful,
	.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
	.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	.\" GNU General Public License for more details.
	.\"
	.\" You should have received a copy of the GNU General Public License
	.\" along with this program; if not, write to the Free Software
	.\" Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	.\"
	.\"
	.SH NAME
	libipq \- iptables userspace packet queuing library.
	.SH SYNOPSIS
	.B #include <linux/netfilter.h>
	.br
	.B #include <libipq.h>
	.SH DESCRIPTION
	libipq is a development library for iptables userspace packet queuing.
	.SS Userspace Packet Queuing
	Netfilter provides a mechanism for passing packets out of the stack for
	queueing to userspace, then receiving these packets back into the kernel
	with a verdict specifying what to do with the packets (such as ACCEPT
	or DROP). These packets may also be modified in userspace prior to
	reinjection back into the kernel.
	.PP
	For each supported protocol, a kernel module called a
	.I queue handler
	may register with Netfilter to perform the mechanics of passing
	packets to and from userspace.
	.PP
	The standard queue handler for IPv4 is ip_queue. It is provided as an
	experimental module with 2.4 kernels, and uses a Netlink socket for
	kernel/userspace communication.
	.PP
	Once ip_queue is loaded, IP packets may be selected with iptables
	and queued for userspace processing via the QUEUE target. For example,
	running the following commands:
	.PP
	# modprobe iptable_filter
	.br
	# modprobe ip_queue
	.br
	# iptables -A OUTPUT -p icmp -j QUEUE
	.PP
	will cause any locally generated ICMP packets (e.g. ping output) to
	be sent to the ip_queue module, which will then attempt to deliver the
	packets to a userspace application. If no userspace application is waiting,
	the packets will be dropped
	.PP
	An application may receive and process these packets via libipq.
	.PP
	.PP
	.SS Libipq Overview
	Libipq provides an API for communicating with ip_queue. The following is
	an overview of API usage, refer to individual man pages for more details
	on each function.
	.PP
	.B Initialisation
	.br
	To initialise the library, call
	.BR ipq_create_handle (3).
	This will attempt to bind to the Netlink socket used by ip_queue and
	return an opaque context handle for subsequent library calls.
	.PP
	.B Setting the Queue Mode
	.br
	.BR ipq_set_mode (3)
	allows the application to specify whether packet metadata, or packet
	payloads as well as metadata are copied to userspace. It is also used to
	initially notify ip_queue that an application is ready to receive queue
	messages.
	.PP
	.B Receiving Packets from the Queue
	.br
	.BR ipq_read (3)
	waits for queue messages to arrive from ip_queue and copies
	them into a supplied buffer.
	Queue messages may be
	.I packet messages
	or
	.I error messages.
	.PP
	The type of packet may be determined with
	.BR ipq_message_type (3).
	.PP
	If it's a packet message, the metadata and optional payload may be retrieved with
	.BR ipq_get_packet (3).
	.PP
	To retrieve the value of an error message, use
	.BR ipq_get_msgerr (3).
	.PP
	.B Issuing Verdicts on Packets
	.br
	To issue a verdict on a packet, and optionally return a modified version
	of the packet to the kernel, call
	.BR ipq_set_verdict (3).
	.PP
	.B Error Handling
	.br
	An error string corresponding to the current value of the internal error
	variable
	.B ipq_errno
	may be obtained with
	.BR ipq_errstr (3).
	.PP
	For simple applications, calling
	.BR ipq_perror (3)
	will print the same message as
	.BR ipq_errstr (3),
	as well as the string corresponding to the global
	.B errno
	value (if set) to stderr.
	.PP
	.B Cleaning Up
	.br
	To free up the Netlink socket and destroy resources associated with
	the context handle, call
	.BR ipq_destroy_handle (3).
	.SH SUMMARY
	.TP 4
	.BR ipq_create_handle (3)
	Initialise library, return context handle.
	.TP
	.BR ipq_set_mode (3)
	Set the queue mode, to copy either packet metadata, or payloads
	as well as metadata to userspace.
	.TP
	.BR ipq_read (3)
	Wait for a queue message to arrive from ip_queue and read it into
	a buffer.
	.TP
	.BR ipq_message_type (3)
	Determine message type in the buffer.
	.TP
	.BR ipq_get_packet (3)
	Retrieve a packet message from the buffer.
	.TP
	.BR ipq_get_msgerr (3)
	Retrieve an error message from the buffer.
	.TP
	.BR ipq_set_verdict (3)
	Set a verdict on a packet, optionally replacing its contents.
	.TP
	.BR ipq_errstr (3)
	Return an error message corresponding to the internal ipq_errno variable.
	.TP
	.BR ipq_perror (3)
	Helper function to print error messages to stderr.
	.TP
	.BR ipq_destroy_handle (3)
	Destroy context handle and associated resources.
	.SH EXAMPLE
	The following is an example of a simple application which receives
	packets and issues NF_ACCEPT verdicts on each packet.
	.RS
	.nf
	/*
	* This code is GPL.
	*/
	#include <linux/netfilter.h>
	#include <libipq.h>
	#include <stdio.h>

	#define BUFSIZE 2048

	static void die(struct ipq_handle *h)
	{
	ipq_perror("passer");
	ipq_destroy_handle(h);
	exit(1);
	}

	int main(int argc, char **argv)
	{
	int status;
	unsigned char buf[BUFSIZE];
	struct ipq_handle *h;

	h = ipq_create_handle(0, NFPROTO_IPV4);
	if (!h)
	die(h);

	status = ipq_set_mode(h, IPQ_COPY_PACKET, BUFSIZE);
	if (status < 0)
	die(h);

	do{
	status = ipq_read(h, buf, BUFSIZE, 0);
	if (status < 0)
	die(h);

	switch (ipq_message_type(buf)) {
	case NLMSG_ERROR:
	fprintf(stderr, "Received error message %d\\n",
	ipq_get_msgerr(buf));
	break;

	case IPQM_PACKET: {
	ipq_packet_msg_t *m = ipq_get_packet(buf);

	status = ipq_set_verdict(h, m->packet_id,
	NF_ACCEPT, 0, NULL);
	if (status < 0)
	die(h);
	break;
	}

	default:
	fprintf(stderr, "Unknown message type!\\n");
	break;
	}
	} while (1);

	ipq_destroy_handle(h);
	return 0;
	}
	.RE
	.fi
	.PP
	Pointers to more libipq application examples may be found in The
	Netfilter FAQ.
	.SH DIAGNOSTICS
	For information about monitoring and tuning ip_queue, refer to the
	Linux 2.4 Packet Filtering HOWTO.
	.PP
	If an application modifies a packet, it needs to also update any
	checksums for the packet. Typically, the kernel will silently discard
	modified packets with invalid checksums.
	.SH SECURITY
	Processes require CAP_NET_ADMIN capabilty to access the kernel ip_queue
	module. Such processes can potentially access and modify any IP packets
	received, generated or forwarded by the kernel.
	.SH TODO
	Per-handle
	.B ipq_errno
	values.
	.SH BUGS
	Probably.
	.SH AUTHOR
	James Morris <jmorris@intercode.com.au>
	.SH COPYRIGHT
	Copyright (c) 2000-2001 Netfilter Core Team.
	.PP
	Distributed under the GNU General Public License.
	.SH CREDITS
	Joost Remijn implemented the
	.B ipq_read
	timeout feature, which appeared in the 1.2.4 release of iptables.
	.PP
	Fernando Anton added support for IPv6.
	.SH SEE ALSO
	.BR iptables (8),
	.BR ipq_create_handle (3),
	.BR ipq_destroy_handle (3),
	.BR ipq_errstr (3),
	.BR ipq_get_msgerr (3),
	.BR ipq_get_packet (3),
	.BR ipq_message_type (3),
	.BR ipq_perror (3),
	.BR ipq_read (3),
	.BR ipq_set_mode (3),
	.BR ipq_set_verdict (3).
	.PP
	The Netfilter home page at http://netfilter.samba.org/
	which has links to The Networking Concepts HOWTO, The Linux 2.4 Packet
	Filtering HOWTO, The Linux 2.4 NAT HOWTO, The Netfilter Hacking HOWTO,
	The Netfilter FAQ and many other useful resources.