| /* | 
 |  * Copyright 2008, Freescale Semiconductor, Inc | 
 |  * Andy Fleming | 
 |  * | 
 |  * Based vaguely on the Linux code | 
 |  * | 
 |  * See file CREDITS for list of people who contributed to this | 
 |  * project. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation; either version 2 of | 
 |  * the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
 |  * MA 02111-1307 USA | 
 |  */ | 
 |  | 
 | #include <config.h> | 
 | #include <common.h> | 
 | #include <command.h> | 
 | #include <mmc.h> | 
 | #include <part.h> | 
 | #include <malloc.h> | 
 | #include <linux/list.h> | 
 | #include <div64.h> | 
 |  | 
 | #include <nand.h> | 
 | #include <boot_mode.h> | 
 |  | 
 |  | 
 |  | 
 | extern int g_iftype; | 
 | /* Set block count limit because of 16 bit register limit on some hardware*/ | 
 | #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT | 
 | #define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535 | 
 | #endif | 
 |  | 
 | static struct list_head mmc_devices; | 
 | static int cur_dev_num = -1; | 
 |  | 
 | extern void zx29_dwmci_clksel(void); | 
 | extern void mmc_delay(unsigned long us); //temp usdelay | 
 |  | 
 | int __weak board_mmc_getwp(struct mmc *mmc) | 
 | { | 
 | 	return -1; | 
 | } | 
 |  | 
 | int mmc_getwp(struct mmc *mmc) | 
 | { | 
 | 	int wp; | 
 |  | 
 | 	wp = board_mmc_getwp(mmc); | 
 |  | 
 | 	if (wp < 0) { | 
 | 		if (mmc->getwp) | 
 | 			wp = mmc->getwp(mmc); | 
 | 		else | 
 | 			wp = 0; | 
 | 	} | 
 |  | 
 | 	return wp; | 
 | } | 
 |  | 
 | int __board_mmc_getcd(struct mmc *mmc) { | 
 | 	return -1; | 
 | } | 
 |  | 
 | int board_mmc_getcd(struct mmc *mmc)__attribute__((weak, | 
 | 	alias("__board_mmc_getcd"))); | 
 |  | 
 | static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, | 
 | 			struct mmc_data *data) | 
 | { | 
 | 	struct mmc_data backup; | 
 | 	int ret; | 
 |  | 
 | 	memset(&backup, 0, sizeof(backup)); | 
 |  | 
 | #ifdef CONFIG_MMC_TRACE | 
 | 	int i; | 
 | 	u8 *ptr; | 
 |  | 
 | 	printf("CMD_SEND:%d\n", cmd->cmdidx); | 
 | 	printf("\t\tARG\t\t\t 0x%08X\n", cmd->cmdarg); | 
 | 	ret = mmc->send_cmd(mmc, cmd, data); | 
 | 	switch (cmd->resp_type) { | 
 | 		case MMC_RSP_NONE: | 
 | 			printf("\t\tMMC_RSP_NONE\n"); | 
 | 			break; | 
 | 		case MMC_RSP_R1: | 
 | 			printf("\t\tMMC_RSP_R1,5,6,7 \t 0x%08X \n", | 
 | 				cmd->response[0]); | 
 | 			break; | 
 | 		case MMC_RSP_R1b: | 
 | 			printf("\t\tMMC_RSP_R1b\t\t 0x%08X \n", | 
 | 				cmd->response[0]); | 
 | 			break; | 
 | 		case MMC_RSP_R2: | 
 | 			printf("\t\tMMC_RSP_R2\t\t 0x%08X \n", | 
 | 				cmd->response[0]); | 
 | 			printf("\t\t          \t\t 0x%08X \n", | 
 | 				cmd->response[1]); | 
 | 			printf("\t\t          \t\t 0x%08X \n", | 
 | 				cmd->response[2]); | 
 | 			printf("\t\t          \t\t 0x%08X \n", | 
 | 				cmd->response[3]); | 
 | 			printf("\n"); | 
 | 			printf("\t\t\t\t\tDUMPING DATA\n"); | 
 | 			for (i = 0; i < 4; i++) { | 
 | 				int j; | 
 | 				printf("\t\t\t\t\t%03d - ", i*4); | 
 | 				ptr = (u8 *)&cmd->response[i]; | 
 | 				ptr += 3; | 
 | 				for (j = 0; j < 4; j++) | 
 | 					printf("%02X ", *ptr--); | 
 | 				printf("\n"); | 
 | 			} | 
 | 			break; | 
 | 		case MMC_RSP_R3: | 
 | 			printf("\t\tMMC_RSP_R3,4\t\t 0x%08X \n", | 
 | 				cmd->response[0]); | 
 | 			break; | 
 | 		default: | 
 | 			printf("\t\tERROR MMC rsp not supported\n"); | 
 | 			break; | 
 | 	} | 
 | #else | 
 | 	ret = mmc->send_cmd(mmc, cmd, data); | 
 | #endif | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int mmc_send_status(struct mmc *mmc, int timeout) | 
 | { | 
 | 	struct mmc_cmd cmd; | 
 | 	int err, retries = 5; | 
 | #ifdef CONFIG_MMC_TRACE | 
 | 	int status; | 
 | #endif | 
 |  | 
 | 	cmd.cmdidx = MMC_CMD_SEND_STATUS; | 
 | 	cmd.resp_type = MMC_RSP_R1; | 
 | 	if (!mmc_host_is_spi(mmc)) | 
 | 		cmd.cmdarg = mmc->rca << 16; | 
 |  | 
 | 	do { | 
 | 		err = mmc_send_cmd(mmc, &cmd, NULL); | 
 | 		if (!err) { | 
 | 			if ((cmd.response[0] & MMC_STATUS_RDY_FOR_DATA) && | 
 | 			    ((cmd.response[0] & MMC_STATUS_CURR_STATE) != | 
 | 			     MMC_STATE_PRG )&& (cmd.response[0] & MMC_STATUS_CURR_STATE) == MMC_STATE_TRAN) | 
 | 				break; | 
 | 			else if (cmd.response[0] & MMC_STATUS_MASK) { | 
 | 				printf("Status Error: 0x%08X\n", | 
 | 					cmd.response[0]); | 
 | 				return COMM_ERR; | 
 | 			} | 
 | 		} | 
 | 		else if (--retries < 0) | 
 | 			return err; | 
 |  | 
 | 		//udelay(1000); | 
 | 		mmc_delay(1000); | 
 |  | 
 | 	} while (timeout--); | 
 |  | 
 | #ifdef CONFIG_MMC_TRACE | 
 | 	status = (cmd.response[0] & MMC_STATUS_CURR_STATE) >> 9; | 
 | 	printf("CURR STATE:%d\n", status); | 
 | #endif | 
 | 	if (timeout <= 0) { | 
 | 		printf("Timeout waiting card ready\n"); | 
 | 		return TIMEOUT; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mmc_set_blocklen(struct mmc *mmc, int len) | 
 | { | 
 | 	struct mmc_cmd cmd; | 
 |  | 
 | 	cmd.cmdidx = MMC_CMD_SET_BLOCKLEN; | 
 | 	cmd.resp_type = MMC_RSP_R1; | 
 | 	cmd.cmdarg = len; | 
 |  | 
 | 	return mmc_send_cmd(mmc, &cmd, NULL); | 
 | } | 
 |  | 
 | struct mmc *find_mmc_device(int dev_num) | 
 | { | 
 | 	struct mmc *m; | 
 | 	struct list_head *entry; | 
 |  | 
 | 	list_for_each(entry, &mmc_devices) { | 
 | 		m = list_entry(entry, struct mmc, link); | 
 |  | 
 | 		if (m->block_dev.dev == dev_num) | 
 | 			return m; | 
 | 	} | 
 |  | 
 | 	printf("MMC Device %d not found\n", dev_num); | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt) | 
 | { | 
 | 	struct mmc_cmd cmd; | 
 | 	ulong end; | 
 | 	int err, start_cmd, end_cmd; | 
 |  | 
 | 	if (mmc->high_capacity) | 
 | 		end = start + blkcnt - 1; | 
 | 	else { | 
 | 		end = (start + blkcnt - 1) * mmc->write_bl_len; | 
 | 		start *= mmc->write_bl_len; | 
 | 	} | 
 |  | 
 | 	if (IS_SD(mmc)) { | 
 | 		start_cmd = SD_CMD_ERASE_WR_BLK_START; | 
 | 		end_cmd = SD_CMD_ERASE_WR_BLK_END; | 
 | 	} else { | 
 | 		start_cmd = MMC_CMD_ERASE_GROUP_START; | 
 | 		end_cmd = MMC_CMD_ERASE_GROUP_END; | 
 | 	} | 
 |  | 
 | 	cmd.cmdidx = start_cmd; | 
 | 	cmd.cmdarg = start; | 
 | 	cmd.resp_type = MMC_RSP_R1; | 
 |  | 
 | 	err = mmc_send_cmd(mmc, &cmd, NULL); | 
 | 	if (err) | 
 | 		goto err_out; | 
 |  | 
 | 	cmd.cmdidx = end_cmd; | 
 | 	cmd.cmdarg = end; | 
 |  | 
 | 	err = mmc_send_cmd(mmc, &cmd, NULL); | 
 | 	if (err) | 
 | 		goto err_out; | 
 |  | 
 | 	cmd.cmdidx = MMC_CMD_ERASE; | 
 | 	cmd.cmdarg = 0; | 
 | 	cmd.resp_type = MMC_RSP_R1b; | 
 |  | 
 | 	err = mmc_send_cmd(mmc, &cmd, NULL); | 
 | 	if (err) | 
 | 		goto err_out; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_out: | 
 | 	puts("mmc erase failed\n"); | 
 | 	return err; | 
 | } | 
 |  | 
 | static unsigned long | 
 | mmc_berase(int dev_num, unsigned long start, lbaint_t blkcnt) | 
 | { | 
 | 	int err = 0; | 
 | 	struct mmc *mmc = find_mmc_device(dev_num); | 
 | 	lbaint_t blk = 0, blk_r = 0; | 
 | 	int timeout = 1000; | 
 |  | 
 | 	if (!mmc) | 
 | 		return -1; | 
 |  | 
 | 	if ((start % mmc->erase_grp_size) || (blkcnt % mmc->erase_grp_size)) | 
 | 		printf("\n\nCaution! Your devices Erase group is 0x%x\n" | 
 | 			"The erase range would be change to 0x%lx~0x%lx\n\n", | 
 | 		       mmc->erase_grp_size, start & ~(mmc->erase_grp_size - 1), | 
 | 		       ((start + blkcnt + mmc->erase_grp_size) | 
 | 		       & ~(mmc->erase_grp_size - 1)) - 1); | 
 |  | 
 | 	while (blk < blkcnt) { | 
 | 		blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ? | 
 | 			mmc->erase_grp_size : (blkcnt - blk); | 
 | 		err = mmc_erase_t(mmc, start + blk, blk_r); | 
 | 		if (err) | 
 | 			break; | 
 |  | 
 | 		blk += blk_r; | 
 |  | 
 | 		/* Waiting for the ready status */ | 
 | 		if (mmc_send_status(mmc, timeout)) | 
 | 			return 0; | 
 | 	} | 
 |  | 
 | 	return blk; | 
 | } | 
 |  | 
 | static ulong | 
 | mmc_write_blocks(struct mmc *mmc, ulong start, lbaint_t blkcnt, const void*src) | 
 | { | 
 | 	struct mmc_cmd cmd; | 
 | 	struct mmc_data data; | 
 | 	int timeout = 1000; | 
 |  | 
 | 	if ((start + blkcnt) > mmc->block_dev.lba) { | 
 | 		printf("MMC: block number 0x%lx exceeds max(0x%lx)\n", | 
 | 			start + blkcnt, mmc->block_dev.lba); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (blkcnt > 1) | 
 | 		cmd.cmdidx = MMC_CMD_WRITE_MULTIPLE_BLOCK; | 
 | 	else | 
 | 		cmd.cmdidx = MMC_CMD_WRITE_SINGLE_BLOCK; | 
 |  | 
 | 	if (mmc->high_capacity) | 
 | 		cmd.cmdarg = start; | 
 | 	else | 
 | 		cmd.cmdarg = start * mmc->write_bl_len; | 
 |  | 
 | 	cmd.resp_type = MMC_RSP_R1; | 
 |  | 
 | 	data.src = src; | 
 | 	data.blocks = blkcnt; | 
 | 	data.blocksize = mmc->write_bl_len; | 
 | 	data.flags = MMC_DATA_WRITE; | 
 |  | 
 | 	if (mmc_send_cmd(mmc, &cmd, &data)) { | 
 | 		printf("mmc write failed\n"); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* SPI multiblock writes terminate using a special | 
 | 	 * token, not a STOP_TRANSMISSION request. | 
 | 	 */ | 
 | #if 0 | 
 |  | 
 | 	if (!mmc_host_is_spi(mmc) && blkcnt > 1) { | 
 | 		cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION; | 
 | 		cmd.cmdarg = 0; | 
 | 		cmd.resp_type = MMC_RSP_R1b; | 
 | 		if (mmc_send_cmd(mmc, &cmd, NULL)) { | 
 | 			printf("mmc fail to send stop cmd\n"); | 
 | 			return 0; | 
 | 		} | 
 | 	} | 
 | #endif | 
 | 	/* Waiting for the ready status */ | 
 | 	if (mmc_send_status(mmc, timeout)) | 
 | 		return 0; | 
 |  | 
 | 	return blkcnt; | 
 | } | 
 |  | 
 | static ulong | 
 | mmc_bwrite(int dev_num, ulong start, lbaint_t blkcnt, const void*src) | 
 | { | 
 | 	lbaint_t cur, blocks_todo = blkcnt; | 
 |  | 
 | 	if (blkcnt == 0) | 
 | 		return 0; | 
 |  | 
 | 	struct mmc *mmc = find_mmc_device(dev_num); | 
 | 	if (!mmc) | 
 | 		return 0; | 
 |  | 
 | 	if (mmc_set_blocklen(mmc, mmc->write_bl_len)) | 
 | 		return 0; | 
 |  | 
 | 	do { | 
 | 		cur = (blocks_todo > mmc->b_max) ?  mmc->b_max : blocks_todo; | 
 | 		if(mmc_write_blocks(mmc, start, cur, src) != cur) | 
 | 			return 0; | 
 | 		blocks_todo -= cur; | 
 | 		start += cur; | 
 | 		src += cur * mmc->write_bl_len; | 
 | 	} while (blocks_todo > 0); | 
 |  | 
 | 	return blkcnt; | 
 | } | 
 |  | 
 | static int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, | 
 | 			   lbaint_t blkcnt) | 
 | { | 
 | 	struct mmc_cmd cmd; | 
 | 	struct mmc_data data; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (blkcnt > 1) | 
 | 		cmd.cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK; | 
 | 	else | 
 | 		cmd.cmdidx = MMC_CMD_READ_SINGLE_BLOCK; | 
 |  | 
 | 	if (mmc->high_capacity) | 
 | 		cmd.cmdarg = start; | 
 | 	else | 
 | 		cmd.cmdarg = start * mmc->read_bl_len; | 
 |  | 
 | 	cmd.resp_type = MMC_RSP_R1; | 
 |  | 
 | 	data.dest = dst; | 
 | 	data.blocks = blkcnt; | 
 | 	data.blocksize = mmc->read_bl_len; | 
 | 	data.flags = MMC_DATA_READ; | 
 |  | 
 |     ret = mmc_send_cmd(mmc, &cmd, &data); | 
 | 	if (ret) | 
 | 	{ | 
 | 	    printf("mmc fail to send read cmd ret = %d\n",ret); | 
 | 		return 0; | 
 | 	} | 
 | 	#if 0 | 
 | 	if (blkcnt > 1) { | 
 | 		cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION; | 
 | 		cmd.cmdarg = 0; | 
 | 		cmd.resp_type = MMC_RSP_R1b; | 
 | 		if (mmc_send_cmd(mmc, &cmd, NULL)) { | 
 | 			printf("mmc fail to send stop cmd\n"); | 
 | 			return 0; | 
 | 		} | 
 | 	} | 
 | #endif | 
 | 	return blkcnt; | 
 | } | 
 |  | 
 | static ulong mmc_bread(int dev_num, ulong start, lbaint_t blkcnt, void *dst) | 
 | { | 
 | 	lbaint_t cur, blocks_todo = blkcnt; | 
 |  | 
 | 	if (blkcnt == 0) | 
 | 		return 0; | 
 |  | 
 | 	struct mmc *mmc = find_mmc_device(dev_num); | 
 | 	if (!mmc) | 
 | 		return 0; | 
 |  | 
 | 	if ((start + blkcnt) > mmc->block_dev.lba) { | 
 | 		printf("MMC: block number 0x%lx exceeds max(0x%lx)\n", | 
 | 			start + blkcnt, mmc->block_dev.lba); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (mmc_set_blocklen(mmc, mmc->read_bl_len)) | 
 | 		return 0; | 
 |  | 
 | 	do { | 
 | 		cur = (blocks_todo > mmc->b_max) ?  mmc->b_max : blocks_todo; | 
 | 		if(mmc_read_blocks(mmc, dst, start, cur) != cur) | 
 | 			return 0; | 
 | 		blocks_todo -= cur; | 
 | 		start += cur; | 
 | 		dst += cur * mmc->read_bl_len; | 
 | 	} while (blocks_todo > 0); | 
 |  | 
 | 	return blkcnt; | 
 | } | 
 |  | 
 | static int mmc_go_idle(struct mmc *mmc) | 
 | { | 
 | 	struct mmc_cmd cmd; | 
 | 	int err; | 
 |  | 
 | 	//udelay(1000); | 
 |     mmc_delay(1000); | 
 | 	cmd.cmdidx = MMC_CMD_GO_IDLE_STATE; | 
 | 	cmd.cmdarg = 0; | 
 | 	cmd.resp_type = MMC_RSP_NONE; | 
 |  | 
 | 	err = mmc_send_cmd(mmc, &cmd, NULL); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	//udelay(2000); | 
 |     mmc_delay(2000); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int sd_send_op_cond(struct mmc *mmc) | 
 | { | 
 | 	int timeout = 1000; | 
 | 	int err; | 
 | 	struct mmc_cmd cmd; | 
 |  | 
 | 	do { | 
 | 		cmd.cmdidx = MMC_CMD_APP_CMD; | 
 | 		cmd.resp_type = MMC_RSP_R1; | 
 | 		cmd.cmdarg = 0; | 
 |  | 
 | 		err = mmc_send_cmd(mmc, &cmd, NULL); | 
 |  | 
 | 		if (err) | 
 | 			return err; | 
 |  | 
 | 		cmd.cmdidx = SD_CMD_APP_SEND_OP_COND; | 
 | 		cmd.resp_type = MMC_RSP_R3; | 
 |  | 
 | 		/* | 
 | 		 * Most cards do not answer if some reserved bits | 
 | 		 * in the ocr are set. However, Some controller | 
 | 		 * can set bit 7 (reserved for low voltages), but | 
 | 		 * how to manage low voltages SD card is not yet | 
 | 		 * specified. | 
 | 		 */ | 
 | 		cmd.cmdarg = mmc_host_is_spi(mmc) ? 0 : | 
 | 			(mmc->voltages & 0xff8000); | 
 |  | 
 | 		if (mmc->version == SD_VERSION_2) | 
 | 			cmd.cmdarg |= OCR_HCS; | 
 |  | 
 | 		err = mmc_send_cmd(mmc, &cmd, NULL); | 
 |  | 
 | 		if (err) | 
 | 			return err; | 
 |  | 
 | 		//udelay(1000); | 
 | 		mmc_delay(1000); | 
 | 	} while ((!(cmd.response[0] & OCR_BUSY)) && timeout--); | 
 |  | 
 | 	if (timeout <= 0) | 
 | 		return UNUSABLE_ERR; | 
 |  | 
 | 	if (mmc->version != SD_VERSION_2) | 
 | 		mmc->version = SD_VERSION_1_0; | 
 |  | 
 | 	if (mmc_host_is_spi(mmc)) { /* read OCR for spi */ | 
 | 		cmd.cmdidx = MMC_CMD_SPI_READ_OCR; | 
 | 		cmd.resp_type = MMC_RSP_R3; | 
 | 		cmd.cmdarg = 0; | 
 |  | 
 | 		err = mmc_send_cmd(mmc, &cmd, NULL); | 
 |  | 
 | 		if (err) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	mmc->ocr = cmd.response[0]; | 
 |  | 
 | 	mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS); | 
 | 	mmc->rca = 0; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mmc_send_op_cond(struct mmc *mmc) | 
 | { | 
 | 	int timeout = 10000; | 
 | 	struct mmc_cmd cmd; | 
 | 	int err; | 
 |  | 
 | 	/* Some cards seem to need this */ | 
 | 	mmc_go_idle(mmc); | 
 |  | 
 |  	/* Asking to the card its capabilities */ | 
 |  	cmd.cmdidx = MMC_CMD_SEND_OP_COND; | 
 |  	cmd.resp_type = MMC_RSP_R3; | 
 |  	cmd.cmdarg = 0; | 
 |  | 
 |  	err = mmc_send_cmd(mmc, &cmd, NULL); | 
 |  | 
 |  	if (err) | 
 |  		return err; | 
 |  | 
 |  	//udelay(1000); | 
 |  	mmc_delay(1000); | 
 |  | 
 | 	do { | 
 | 		cmd.cmdidx = MMC_CMD_SEND_OP_COND; | 
 | 		cmd.resp_type = MMC_RSP_R3; | 
 | 		cmd.cmdarg = (mmc_host_is_spi(mmc) ? 0 : | 
 | 				(mmc->voltages & | 
 | 				(cmd.response[0] & OCR_VOLTAGE_MASK)) | | 
 | 				(cmd.response[0] & OCR_ACCESS_MODE)); | 
 |  | 
 | 		if (mmc->host_caps & MMC_MODE_HC) | 
 | 			cmd.cmdarg |= OCR_HCS; | 
 |  | 
 | 		err = mmc_send_cmd(mmc, &cmd, NULL); | 
 |  | 
 | 		if (err) | 
 | 			return err; | 
 |  | 
 | 		//udelay(1000); | 
 | 		mmc_delay(1000); | 
 | 	} while (!(cmd.response[0] & OCR_BUSY) && timeout--); | 
 |  | 
 | 	if (timeout <= 0) | 
 | 		return UNUSABLE_ERR; | 
 |  | 
 | 	if (mmc_host_is_spi(mmc)) { /* read OCR for spi */ | 
 | 		cmd.cmdidx = MMC_CMD_SPI_READ_OCR; | 
 | 		cmd.resp_type = MMC_RSP_R3; | 
 | 		cmd.cmdarg = 0; | 
 |  | 
 | 		err = mmc_send_cmd(mmc, &cmd, NULL); | 
 |  | 
 | 		if (err) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	mmc->version = MMC_VERSION_UNKNOWN; | 
 | 	mmc->ocr = cmd.response[0]; | 
 |  | 
 | 	mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS); | 
 | 	mmc->rca = 0; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd) | 
 | { | 
 | 	struct mmc_cmd cmd; | 
 | 	struct mmc_data data; | 
 | 	int err; | 
 |  | 
 | 	/* Get the Card Status Register */ | 
 | 	cmd.cmdidx = MMC_CMD_SEND_EXT_CSD; | 
 | 	cmd.resp_type = MMC_RSP_R1; | 
 | 	cmd.cmdarg = 0; | 
 |  | 
 | 	data.dest = (char *)ext_csd; | 
 | 	data.blocks = 1; | 
 | 	data.blocksize = 512; | 
 | 	data.flags = MMC_DATA_READ; | 
 |  | 
 | 	err = mmc_send_cmd(mmc, &cmd, &data); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 |  | 
 | static int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value) | 
 | { | 
 | 	struct mmc_cmd cmd; | 
 | 	int timeout = 1000; | 
 | 	int ret; | 
 |  | 
 | 	cmd.cmdidx = MMC_CMD_SWITCH; | 
 | 	cmd.resp_type = MMC_RSP_R1b; | 
 | 	cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | | 
 | 				 (index << 16) | | 
 | 				 (value << 8)|set; | 
 |  | 
 | 	ret = mmc_send_cmd(mmc, &cmd, NULL); | 
 |  | 
 | 	/* Waiting for the ready status */ | 
 | 	if (!ret) | 
 | 		ret = mmc_send_status(mmc, timeout); | 
 |  | 
 | 	return ret; | 
 |  | 
 | } | 
 |  | 
 | static int mmc_change_freq(struct mmc *mmc) | 
 | { | 
 | 	ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, 512); | 
 | 	//unsigned char ext_csd[512] = {0}; | 
 | 	char cardtype; | 
 | 	int err; | 
 |  | 
 | 	mmc->card_caps = 0; | 
 |  | 
 | 	if (mmc_host_is_spi(mmc)) | 
 | 		return 0; | 
 |  | 
 | 	/* Only version 4 supports high-speed */ | 
 | 	if (mmc->version < MMC_VERSION_4) | 
 | 		return 0; | 
 |  | 
 | 	err = mmc_send_ext_csd(mmc, ext_csd); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	cardtype = ext_csd[EXT_CSD_CARD_TYPE] & 0xf; | 
 |  | 
 | 	err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, 1); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	/* Now check to see that it worked */ | 
 | 	err = mmc_send_ext_csd(mmc, ext_csd); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	/* No high-speed support */ | 
 | 	if (!ext_csd[EXT_CSD_HS_TIMING]) | 
 | 		return 0; | 
 |  | 
 | 	/* High Speed is set, there are two types: 52MHz and 26MHz */ | 
 | 	if (cardtype & MMC_HS_52MHZ) | 
 | 		mmc->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; | 
 | 	else | 
 | 		mmc->card_caps |= MMC_MODE_HS; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int mmc_switch_part(int dev_num, unsigned int part_num) | 
 | { | 
 | 	struct mmc *mmc = find_mmc_device(dev_num); | 
 |  | 
 | 	if (!mmc) | 
 | 		return -1; | 
 |  | 
 | 	return mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF, | 
 | 			  (mmc->part_config & ~PART_ACCESS_MASK) | 
 | 			  | (part_num & PART_ACCESS_MASK)); | 
 | } | 
 |  | 
 | int mmc_getcd(struct mmc *mmc) | 
 | { | 
 | 	int cd = 0; | 
 |  | 
 | 	if (mmc->getcd) | 
 | 		cd = mmc->getcd(mmc); | 
 | 	else | 
 | 		cd = 0; | 
 |  | 
 | 	return cd; | 
 | } | 
 |  | 
 | static int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp) | 
 | { | 
 | 	struct mmc_cmd cmd; | 
 | 	struct mmc_data data; | 
 |  | 
 | 	/* Switch the frequency */ | 
 | 	cmd.cmdidx = SD_CMD_SWITCH_FUNC; | 
 | 	cmd.resp_type = MMC_RSP_R1; | 
 | 	cmd.cmdarg = (mode << 31) | 0xffffff; | 
 | 	cmd.cmdarg &= ~(0xf << (group * 4)); | 
 | 	cmd.cmdarg |= value << (group * 4); | 
 |  | 
 | 	data.dest = (char *)resp; | 
 | 	data.blocksize = 64; | 
 | 	data.blocks = 1; | 
 | 	data.flags = MMC_DATA_READ; | 
 |  | 
 | 	return mmc_send_cmd(mmc, &cmd, &data); | 
 | } | 
 |  | 
 |  | 
 | static int sd_change_freq(struct mmc *mmc) | 
 | { | 
 | 	int err; | 
 | 	struct mmc_cmd cmd; | 
 | 	ALLOC_CACHE_ALIGN_BUFFER(uint, scr, 2); | 
 | 	ALLOC_CACHE_ALIGN_BUFFER(uint, switch_status, 16); | 
 | 	struct mmc_data data; | 
 | 	int timeout; | 
 |  | 
 | 	mmc->card_caps = 0; | 
 |  | 
 | 	if (mmc_host_is_spi(mmc)) | 
 | 		return 0; | 
 |  | 
 | 	/* Read the SCR to find out if this card supports higher speeds */ | 
 | 	cmd.cmdidx = MMC_CMD_APP_CMD; | 
 | 	cmd.resp_type = MMC_RSP_R1; | 
 | 	cmd.cmdarg = mmc->rca << 16; | 
 |  | 
 | 	err = mmc_send_cmd(mmc, &cmd, NULL); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	cmd.cmdidx = SD_CMD_APP_SEND_SCR; | 
 | 	cmd.resp_type = MMC_RSP_R1; | 
 | 	cmd.cmdarg = 0; | 
 |  | 
 | 	timeout = 3; | 
 |  | 
 | retry_scr: | 
 | 	data.dest = (char *)scr; | 
 | 	data.blocksize = 8; | 
 | 	data.blocks = 1; | 
 | 	data.flags = MMC_DATA_READ; | 
 |  | 
 | 	err = mmc_send_cmd(mmc, &cmd, &data); | 
 |  | 
 | 	if (err) { | 
 | 		if (timeout--) | 
 | 			goto retry_scr; | 
 |  | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	mmc->scr[0] = __be32_to_cpu(scr[0]); | 
 | 	mmc->scr[1] = __be32_to_cpu(scr[1]); | 
 |  | 
 | 	switch ((mmc->scr[0] >> 24) & 0xf) { | 
 | 		case 0: | 
 | 			mmc->version = SD_VERSION_1_0; | 
 | 			break; | 
 | 		case 1: | 
 | 			mmc->version = SD_VERSION_1_10; | 
 | 			break; | 
 | 		case 2: | 
 | 			mmc->version = SD_VERSION_2; | 
 | 			if ((mmc->scr[0] >> 15) & 0x1) | 
 | 				mmc->version = SD_VERSION_3; | 
 | 			break; | 
 | 		default: | 
 | 			mmc->version = SD_VERSION_1_0; | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	if (mmc->scr[0] & SD_DATA_4BIT) | 
 | 		mmc->card_caps |= MMC_MODE_4BIT; | 
 |  | 
 | 	/* Version 1.0 doesn't support switching */ | 
 | 	if (mmc->version == SD_VERSION_1_0) | 
 | 		return 0; | 
 |  | 
 | 	timeout = 4; | 
 | 	while (timeout--) { | 
 | 		err = sd_switch(mmc, SD_SWITCH_CHECK, 0, 1, | 
 | 				(u8 *)switch_status); | 
 |  | 
 | 		if (err) | 
 | 			return err; | 
 |  | 
 | 		/* The high-speed function is busy.  Try again */ | 
 | 		if (!(__be32_to_cpu(switch_status[7]) & SD_HIGHSPEED_BUSY)) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	/* If high-speed isn't supported, we return */ | 
 | 	if (!(__be32_to_cpu(switch_status[3]) & SD_HIGHSPEED_SUPPORTED)) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * If the host doesn't support SD_HIGHSPEED, do not switch card to | 
 | 	 * HIGHSPEED mode even if the card support SD_HIGHSPPED. | 
 | 	 * This can avoid furthur problem when the card runs in different | 
 | 	 * mode between the host. | 
 | 	 */ | 
 | 	if (!((mmc->host_caps & MMC_MODE_HS_52MHz) && | 
 | 		(mmc->host_caps & MMC_MODE_HS))) | 
 | 		return 0; | 
 |  | 
 | 	err = sd_switch(mmc, SD_SWITCH_SWITCH, 0, 1, (u8 *)switch_status); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	if ((__be32_to_cpu(switch_status[4]) & 0x0f000000) == 0x01000000) | 
 | 		mmc->card_caps |= MMC_MODE_HS; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* frequency bases */ | 
 | /* divided by 10 to be nice to platforms without floating point */ | 
 | static const int fbase[] = { | 
 | 	10000, | 
 | 	100000, | 
 | 	1000000, | 
 | 	10000000, | 
 | }; | 
 |  | 
 | /* Multiplier values for TRAN_SPEED.  Multiplied by 10 to be nice | 
 |  * to platforms without floating point. | 
 |  */ | 
 | static const int multipliers[] = { | 
 | 	0,	/* reserved */ | 
 | 	10, | 
 | 	12, | 
 | 	13, | 
 | 	15, | 
 | 	20, | 
 | 	25, | 
 | 	30, | 
 | 	35, | 
 | 	40, | 
 | 	45, | 
 | 	50, | 
 | 	55, | 
 | 	60, | 
 | 	70, | 
 | 	80, | 
 | }; | 
 |  | 
 | static void mmc_set_ios(struct mmc *mmc) | 
 | { | 
 | 	mmc->set_ios(mmc); | 
 | } | 
 |  | 
 | void mmc_set_clock(struct mmc *mmc, uint clock) | 
 | { | 
 | 	if (clock > mmc->f_max) | 
 | 		clock = mmc->f_max; | 
 |  | 
 | 	if (clock < mmc->f_min) | 
 | 		clock = mmc->f_min; | 
 |  | 
 | 	mmc->clock = clock; | 
 |  | 
 | 	mmc_set_ios(mmc); | 
 | } | 
 |  | 
 | static void mmc_set_bus_width(struct mmc *mmc, uint width) | 
 | { | 
 | 	mmc->bus_width = width; | 
 |  | 
 | 	mmc_set_ios(mmc); | 
 | } | 
 |  | 
 | static int mmc_startup(struct mmc *mmc) | 
 | { | 
 | 	int err; | 
 | 	uint mult, freq; | 
 | 	u64 cmult, csize, capacity; | 
 | 	struct mmc_cmd cmd; | 
 | 	ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, 512); | 
 | 	ALLOC_CACHE_ALIGN_BUFFER(u8, test_csd, 512); | 
 | 	int timeout = 1000; | 
 |  | 
 |  | 
 | 	/* Put the Card in Identify Mode */ | 
 | 	cmd.cmdidx = mmc_host_is_spi(mmc) ? MMC_CMD_SEND_CID : | 
 | 		MMC_CMD_ALL_SEND_CID; /* cmd not supported in spi */ | 
 | 	cmd.resp_type = MMC_RSP_R2; | 
 | 	cmd.cmdarg = 0; | 
 |  | 
 | 	err = mmc_send_cmd(mmc, &cmd, NULL); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	memcpy(mmc->cid, cmd.response, 16); | 
 |  | 
 | 	/* | 
 | 	 * For MMC cards, set the Relative Address. | 
 | 	 * For SD cards, get the Relatvie Address. | 
 | 	 * This also puts the cards into Standby State | 
 | 	 */ | 
 | 	if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */ | 
 | 		cmd.cmdidx = SD_CMD_SEND_RELATIVE_ADDR; | 
 | 		cmd.cmdarg = mmc->rca << 16; | 
 | 		cmd.resp_type = MMC_RSP_R6; | 
 |  | 
 | 		err = mmc_send_cmd(mmc, &cmd, NULL); | 
 |  | 
 | 		if (err) | 
 | 			return err; | 
 |  | 
 | 		if (IS_SD(mmc)) | 
 | 			mmc->rca = (cmd.response[0] >> 16) & 0xffff; | 
 | 	} | 
 |  | 
 | 	/* Get the Card-Specific Data */ | 
 | 	cmd.cmdidx = MMC_CMD_SEND_CSD; | 
 | 	cmd.resp_type = MMC_RSP_R2; | 
 | 	cmd.cmdarg = mmc->rca << 16; | 
 |  | 
 | 	err = mmc_send_cmd(mmc, &cmd, NULL); | 
 |  | 
 | 	/* Waiting for the ready status */ | 
 | 	//mmc_send_status(mmc, timeout); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	mmc->csd[0] = cmd.response[0]; | 
 | 	mmc->csd[1] = cmd.response[1]; | 
 | 	mmc->csd[2] = cmd.response[2]; | 
 | 	mmc->csd[3] = cmd.response[3]; | 
 |  | 
 | 	if (mmc->version == MMC_VERSION_UNKNOWN) { | 
 | 		int version = (cmd.response[0] >> 26) & 0xf; | 
 |  | 
 | 		switch (version) { | 
 | 			case 0: | 
 | 				mmc->version = MMC_VERSION_1_2; | 
 | 				break; | 
 | 			case 1: | 
 | 				mmc->version = MMC_VERSION_1_4; | 
 | 				break; | 
 | 			case 2: | 
 | 				mmc->version = MMC_VERSION_2_2; | 
 | 				break; | 
 | 			case 3: | 
 | 				mmc->version = MMC_VERSION_3; | 
 | 				break; | 
 | 			case 4: | 
 | 				mmc->version = MMC_VERSION_4; | 
 | 				break; | 
 | 			default: | 
 | 				mmc->version = MMC_VERSION_1_2; | 
 | 				break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* divide frequency by 10, since the mults are 10x bigger */ | 
 | 	freq = fbase[(cmd.response[0] & 0x7)]; | 
 | 	mult = multipliers[((cmd.response[0] >> 3) & 0xf)]; | 
 |  | 
 | 	mmc->tran_speed = freq * mult; | 
 |  | 
 | 	mmc->read_bl_len = 1 << ((cmd.response[1] >> 16) & 0xf); | 
 |  | 
 | 	if (IS_SD(mmc)) | 
 | 		mmc->write_bl_len = mmc->read_bl_len; | 
 | 	else | 
 | 		mmc->write_bl_len = 1 << ((cmd.response[3] >> 22) & 0xf); | 
 |  | 
 | 	if (mmc->high_capacity) { | 
 | 		csize = (mmc->csd[1] & 0x3f) << 16 | 
 | 			| (mmc->csd[2] & 0xffff0000) >> 16; | 
 | 		cmult = 8; | 
 | 	} else { | 
 | 		csize = (mmc->csd[1] & 0x3ff) << 2 | 
 | 			| (mmc->csd[2] & 0xc0000000) >> 30; | 
 | 		cmult = (mmc->csd[2] & 0x00038000) >> 15; | 
 | 	} | 
 |  | 
 | 	mmc->capacity = (csize + 1) << (cmult + 2); | 
 | 	mmc->capacity *= mmc->read_bl_len; | 
 |  | 
 | 	if (mmc->read_bl_len > 512) | 
 | 		mmc->read_bl_len = 512; | 
 |  | 
 | 	if (mmc->write_bl_len > 512) | 
 | 		mmc->write_bl_len = 512; | 
 |  | 
 | 	/* Select the card, and put it into Transfer Mode */ | 
 | 	if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */ | 
 | 		cmd.cmdidx = MMC_CMD_SELECT_CARD; | 
 | 		cmd.resp_type = MMC_RSP_R1; | 
 | 		cmd.cmdarg = mmc->rca << 16; | 
 | 		err = mmc_send_cmd(mmc, &cmd, NULL); | 
 |  | 
 | 		if (err) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * For SD, its erase group is always one sector | 
 | 	 */ | 
 | 	mmc->erase_grp_size = 1; | 
 | 	mmc->part_config = MMCPART_NOAVAILABLE; | 
 | 	if (!IS_SD(mmc) && (mmc->version >= MMC_VERSION_4)) { | 
 | 		/* check  ext_csd version and capacity */ | 
 | 		err = mmc_send_ext_csd(mmc, ext_csd); | 
 | 		if (!err && (ext_csd[EXT_CSD_REV] >= 2)) { | 
 | 			/* | 
 | 			 * According to the JEDEC Standard, the value of | 
 | 			 * ext_csd's capacity is valid if the value is more | 
 | 			 * than 2GB | 
 | 			 */ | 
 | 			capacity = ext_csd[EXT_CSD_SEC_CNT] << 0 | 
 | 					| ext_csd[EXT_CSD_SEC_CNT + 1] << 8 | 
 | 					| ext_csd[EXT_CSD_SEC_CNT + 2] << 16 | 
 | 					| ext_csd[EXT_CSD_SEC_CNT + 3] << 24; | 
 | 			capacity *= 512; | 
 | 			if ((capacity >> 20) > 2 * 1024) | 
 | 				mmc->capacity = capacity; | 
 | 		} | 
 |  | 
 | 		switch (ext_csd[EXT_CSD_REV]) { | 
 | 		case 1: | 
 | 			mmc->version = MMC_VERSION_4_1; | 
 | 			break; | 
 | 		case 2: | 
 | 			mmc->version = MMC_VERSION_4_2; | 
 | 			break; | 
 | 		case 3: | 
 | 			mmc->version = MMC_VERSION_4_3; | 
 | 			break; | 
 | 		case 5: | 
 | 			mmc->version = MMC_VERSION_4_41; | 
 | 			break; | 
 | 		case 6: | 
 | 			mmc->version = MMC_VERSION_4_5; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Check whether GROUP_DEF is set, if yes, read out | 
 | 		 * group size from ext_csd directly, or calculate | 
 | 		 * the group size from the csd value. | 
 | 		 */ | 
 | 		if (ext_csd[EXT_CSD_ERASE_GROUP_DEF]) | 
 | 			mmc->erase_grp_size = | 
 | 			      ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * 512 * 1024; | 
 | 		else { | 
 | 			int erase_gsz, erase_gmul; | 
 | 			erase_gsz = (mmc->csd[2] & 0x00007c00) >> 10; | 
 | 			erase_gmul = (mmc->csd[2] & 0x000003e0) >> 5; | 
 | 			mmc->erase_grp_size = (erase_gsz + 1) | 
 | 				* (erase_gmul + 1); | 
 | 		} | 
 |  | 
 | 		/* store the partition info of emmc */ | 
 | 		if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) || | 
 | 		    ext_csd[EXT_CSD_BOOT_MULT]) | 
 | 		mmc->part_config = ext_csd[EXT_CSD_PART_CONF]; | 
 |  | 
 | 	} | 
 |  | 
 | 	if (IS_SD(mmc)) | 
 | 		err = sd_change_freq(mmc); | 
 | 	else | 
 | 		err = mmc_change_freq(mmc); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	/* Restrict card's capabilities by what the host can do */ | 
 | 	mmc->card_caps &= mmc->host_caps; | 
 |  | 
 | 	if (IS_SD(mmc)) { | 
 | 		if (mmc->card_caps & MMC_MODE_4BIT) { | 
 | 			cmd.cmdidx = MMC_CMD_APP_CMD; | 
 | 			cmd.resp_type = MMC_RSP_R1; | 
 | 			cmd.cmdarg = mmc->rca << 16; | 
 |  | 
 | 			err = mmc_send_cmd(mmc, &cmd, NULL); | 
 | 			if (err) | 
 | 				return err; | 
 |  | 
 | 			cmd.cmdidx = SD_CMD_APP_SET_BUS_WIDTH; | 
 | 			cmd.resp_type = MMC_RSP_R1; | 
 | 			cmd.cmdarg = 2; | 
 | 			err = mmc_send_cmd(mmc, &cmd, NULL); | 
 | 			if (err) | 
 | 				return err; | 
 |  | 
 | 			mmc_set_bus_width(mmc, 4); | 
 | 		} | 
 |  | 
 | 		if (mmc->card_caps & MMC_MODE_HS) | 
 | 			mmc->tran_speed = 50000000; | 
 | 		else | 
 | 			mmc->tran_speed = 25000000; | 
 | 	} else { | 
 |  | 
 | 		int idx; | 
 |  | 
 | 		/* An array of possible bus widths in order of preference */ | 
 | 		static unsigned ext_csd_bits[] = { | 
 | 			EXT_CSD_BUS_WIDTH_8, | 
 | 			EXT_CSD_BUS_WIDTH_4, | 
 | 			EXT_CSD_BUS_WIDTH_1, | 
 | 		}; | 
 |  | 
 | 		/* An array to map CSD bus widths to host cap bits */ | 
 | 		static unsigned ext_to_hostcaps[] = { | 
 | 			[EXT_CSD_BUS_WIDTH_4] = MMC_MODE_4BIT, | 
 | 			[EXT_CSD_BUS_WIDTH_8] = MMC_MODE_8BIT, | 
 | 		}; | 
 |  | 
 | 		/* An array to map chosen bus width to an integer */ | 
 | 		static unsigned widths[] = { | 
 | 			8, 4, 1, | 
 | 		}; | 
 | 		for (idx=0; idx < ARRAY_SIZE(ext_csd_bits)-2; idx++) | 
 | 		{ | 
 | 			unsigned int extw = ext_csd_bits[idx]; | 
 |  | 
 |             printf("change extw = %d, width=%d\n",extw,widths[idx]); | 
 | 			/* | 
 | 			 * Check to make sure the controller supports | 
 | 			 * this bus width, if it's more than 1 | 
 | 			 */ | 
 | 			if (extw != EXT_CSD_BUS_WIDTH_1 && | 
 | 					!(mmc->host_caps & ext_to_hostcaps[extw])) | 
 | 				continue; | 
 |  | 
 | 			err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, | 
 | 					EXT_CSD_BUS_WIDTH, extw); | 
 | 			if (err) | 
 | 				continue; | 
 |  | 
 | 			mmc_set_bus_width(mmc, widths[idx]); | 
 |  | 
 |  | 
 | 		} | 
 |  | 
 | 		if (mmc->card_caps & MMC_MODE_HS) { | 
 | 			if (mmc->card_caps & MMC_MODE_HS_52MHz) | 
 | 				mmc->tran_speed = 52000000; | 
 | 			else | 
 | 				mmc->tran_speed = 26000000; | 
 | 		} | 
 |  | 
 | 	} | 
 |     printf("mmc_set_clock %d\n",mmc->tran_speed); | 
 |  | 
 | 	mmc_set_clock(mmc, mmc->tran_speed); | 
 |  | 
 | 	/* fill in device description */ | 
 | 	mmc->block_dev.lun = 0; | 
 | 	mmc->block_dev.type = 0; | 
 | 	mmc->block_dev.blksz = mmc->read_bl_len; | 
 | 	mmc->block_dev.lba = lldiv(mmc->capacity, mmc->read_bl_len); | 
 | 	sprintf(mmc->block_dev.vendor, "Man %06x Snr %04x%04x", | 
 | 		mmc->cid[0] >> 24, (mmc->cid[2] & 0xffff), | 
 | 		(mmc->cid[3] >> 16) & 0xffff); | 
 | 	sprintf(mmc->block_dev.product, "%c%c%c%c%c%c", mmc->cid[0] & 0xff, | 
 | 		(mmc->cid[1] >> 24), (mmc->cid[1] >> 16) & 0xff, | 
 | 		(mmc->cid[1] >> 8) & 0xff, mmc->cid[1] & 0xff, | 
 | 		(mmc->cid[2] >> 24) & 0xff); | 
 | 	sprintf(mmc->block_dev.revision, "%d.%d", (mmc->cid[2] >> 20) & 0xf, | 
 | 		(mmc->cid[2] >> 16) & 0xf); | 
 | #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT) | 
 | 	//init_part(&mmc->block_dev); | 
 | #endif | 
 |  | 
 | 	return 0; | 
 | } | 
 | static int mmc_send_if_cond(struct mmc *mmc) | 
 | { | 
 | 	struct mmc_cmd cmd; | 
 | 	int err; | 
 |  | 
 | 	cmd.cmdidx = SD_CMD_SEND_IF_COND; | 
 | 	/* We set the bit if the host supports voltages between 2.7 and 3.6 V */ | 
 | 	cmd.cmdarg = ((mmc->voltages & 0xff8000) != 0) << 8 | 0xaa; | 
 | 	cmd.resp_type = MMC_RSP_R7; | 
 |  | 
 | 	err = mmc_send_cmd(mmc, &cmd, NULL); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	if ((cmd.response[0] & 0xff) != 0xaa) | 
 | 		return UNUSABLE_ERR; | 
 | 	else | 
 | 		mmc->version = SD_VERSION_2; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int mmc_register(struct mmc *mmc) | 
 | { | 
 | 	/* Setup the universal parts of the block interface just once */ | 
 | 	mmc->block_dev.if_type = IF_TYPE_MMC; | 
 | 	mmc->block_dev.dev = cur_dev_num++; | 
 | 	mmc->block_dev.removable = 1; | 
 | 	mmc->block_dev.block_read = mmc_bread; | 
 | 	mmc->block_dev.block_write = mmc_bwrite; | 
 | 	mmc->block_dev.block_erase = mmc_berase; | 
 | 	if (!mmc->b_max) | 
 | 		mmc->b_max = 128; | 
 |  | 
 | 	INIT_LIST_HEAD (&mmc->link); | 
 |  | 
 | 	list_add_tail (&mmc->link, &mmc_devices); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | block_dev_desc_t *mmc_get_dev(int dev) | 
 | { | 
 | 	struct mmc *mmc = find_mmc_device(dev); | 
 | 	if (!mmc || mmc_init(mmc)) | 
 | 		return NULL; | 
 |  | 
 | 	return &mmc->block_dev; | 
 | } | 
 |  | 
 |  | 
 | int mmc_init(struct mmc *mmc) | 
 | { | 
 | 	int err; | 
 | 	int flash_type = 0; | 
 |  | 
 |  | 
 |  | 
 | 	if (mmc->has_init) | 
 | 		return 0; | 
 |  | 
 |     zx29_dwmci_clksel(); | 
 | 	err = mmc->init(mmc); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	/*if (mmc_getcd(mmc) == 0) { | 
 | 		mmc->has_init = 0; | 
 | 		printf("MMC: no card present\n"); | 
 | 		return NO_CARD_ERR; | 
 | 	}*/ | 
 | 	mmc_set_bus_width(mmc, 1); | 
 |     mmc_set_clock(mmc, 1); | 
 |  | 
 |  | 
 | 	/* Reset the Card */ | 
 | 	err = mmc_go_idle(mmc); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	/* The internal partition reset to user partition(0) at every CMD0*/ | 
 | 	mmc->part_num = 0; | 
 |  | 
 |     err = mmc_send_op_cond(mmc); | 
 |  | 
 | 	if (err) | 
 | 	{ | 
 | 		printf("Card did not respond to voltage select!\n"); | 
 | 		return UNUSABLE_ERR; | 
 | 	} | 
 |  | 
 | 	err = mmc_startup(mmc); | 
 | 	if (err) | 
 | 		mmc->has_init = 0; | 
 | 	else | 
 | 		mmc->has_init = 1; | 
 | 	return err; | 
 | } | 
 |  | 
 | /* | 
 |  * CPU and board-specific MMC initializations.  Aliased function | 
 |  * signals caller to move on | 
 |  */ | 
 | static int __def_mmc_init(bd_t *bis) | 
 | { | 
 | 	return -1; | 
 | } | 
 |  | 
 | int cpu_mmc_init(bd_t *bis) __attribute__((weak, alias("__def_mmc_init"))); | 
 | int board_mmc_init(bd_t *bis) __attribute__((weak, alias("__def_mmc_init"))); | 
 |  | 
 | void print_mmc_devices(char separator) | 
 | { | 
 | 	struct mmc *m; | 
 | 	struct list_head *entry; | 
 |  | 
 | 	list_for_each(entry, &mmc_devices) { | 
 | 		m = list_entry(entry, struct mmc, link); | 
 |  | 
 | 		printf("%s: %d", m->name, m->block_dev.dev); | 
 |  | 
 | 		if (entry->next != &mmc_devices) | 
 | 			printf("%c ", separator); | 
 | 	} | 
 |  | 
 | 	printf("\n"); | 
 | } | 
 |  | 
 | int get_mmc_num(void) | 
 | { | 
 | 	return cur_dev_num; | 
 | } | 
 |  | 
 | int mmc_initialize(bd_t *bis) | 
 | { | 
 | 	INIT_LIST_HEAD (&mmc_devices); | 
 | 	cur_dev_num = 0; | 
 |  | 
 | 	board_mmc_init(bis); | 
 |     mmc_get_dev(0); | 
 | 	print_mmc_devices(','); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int mmc_read( nand_info_t *nand, loff_t src, size_t *length, u_char *dst) | 
 | { | 
 | 	ulong start = 0; | 
 | 	ulong end = 0; | 
 | 	lbaint_t blkcnt = 0; | 
 | 	uchar buf_s[512] = {0};   /*buffer for start block*/ | 
 | 	uchar buf_e[512] = {0};   /*buffer for end block*/ | 
 | 	uint blklen = 0; | 
 | 	uint len_s = 0; | 
 |     uint len_e = 0; | 
 | 	int ret = 0; | 
 | 	size_t size = *length; | 
 |  | 
 |     struct mmc *mmc = find_mmc_device(0); | 
 |  | 
 | 	if (!mmc) | 
 | 		return NO_CARD_ERR; | 
 |  | 
 |     blklen = mmc->read_bl_len; | 
 |  | 
 | 	if((size == 0)||(src > mmc->capacity)||((src+size)> mmc->capacity)) | 
 | 	{ | 
 |         printf("read length is error\n"); | 
 | 		return LEN_ERR; | 
 | 	} | 
 |  | 
 | 	start = src &(~(blklen-1));        /*ÆðʼµØÖ·¶ÔÆëµ½¿é±ß½ç*/ | 
 | 	end = (src+size-1)&(~(blklen-1));  /*½áÊøµØÖ·¶ÔÆëµ½¿é±ß½ç*/ | 
 | 	if(size%blklen) | 
 | 	    blkcnt = (size/blklen)+1; | 
 | 	else | 
 | 		blkcnt = size/blklen;          /*¼ÆËãʵ¼Ê¶ÁÈ¡¿éÊý*/ | 
 |  | 
 | 	len_s = blklen-(src-start);   /*Æðʼ¿éʵ¼Ê³¤¶È*/ | 
 | 	len_e = (src+size)-end;     /*½áÊø¿éʵ¼Ê³¤¶È*/ | 
 | 	if((start == src)&&(size%blklen == 0)) | 
 | 	{ | 
 |         ret = mmc_bread(0, start/blklen, blkcnt, dst); /*°´Õû¿é¶ÔÆë¶ÁÈ¡*/ | 
 | 		if(ret == blkcnt) | 
 | 	        return 0; | 
 | 	    else | 
 | 		    return -1; | 
 | 	} | 
 |     else if (blkcnt == 1)                 /*µ¥¿é²»¶ÔÆë¶ÁÈ¡*/ | 
 |     { | 
 |         ret = mmc_bread(0, start/blklen, 1, (uchar *)buf_s); | 
 | 		memcpy(dst, (uchar *)buf_s+src-start,size); | 
 | 		if(ret == 1) | 
 | 	        return 0; | 
 | 	    else | 
 | 		    return -1; | 
 |     } | 
 | 	else                                     /*¶à¿é²»¶ÔÆë¶ÁÈ¡*/ | 
 | 	{ | 
 | 	    ret = mmc_bread(0, start/blklen, 1, (uchar *)buf_s); | 
 | 		ret += mmc_bread(0, (start+blklen)/blklen, blkcnt-2, dst+len_s); | 
 |         ret += mmc_bread(0, end/blklen, 1, (uchar *)buf_e); | 
 | 		memcpy(dst,(uchar *)buf_s+src-start,len_s); | 
 | 		memcpy(dst+len_s+(blkcnt-2)*blklen,(uchar *)buf_e,len_e); | 
 |         if(ret == blkcnt) | 
 | 	        return 0; | 
 | 	    else | 
 | 		    return -1; | 
 | 	} | 
 | } | 
 |  | 
 | int mmc_erase( u64 src, lbaint_t blkcnt) | 
 | { | 
 |     ulong start = 0; | 
 | 	int ret = 0; | 
 |     struct mmc *mmc = find_mmc_device(0); | 
 |  | 
 | 	if (!mmc) | 
 | 		return NO_CARD_ERR; | 
 |  | 
 |     if((blkcnt == 0)||(src > mmc->capacity)||((src+blkcnt*mmc->read_bl_len)> mmc->capacity)) | 
 | 	{ | 
 |         printf("length is error\n"); | 
 | 		return LEN_ERR; //LENGTH_ERR | 
 | 	} | 
 |     start = src &(~(mmc->read_bl_len-1));  /*µØÖ·¶ÔÆëµ½¿é±ß½ç*/ | 
 |     ret = mmc_berase(0, start/mmc->read_bl_len, blkcnt); | 
 |     if(ret == blkcnt) | 
 | 	    return 0; | 
 | 	else | 
 | 		return -1; | 
 |  | 
 | } | 
 |  | 
 | int mmc_write( nand_info_t *nand, loff_t src, size_t *length, u_char *dst, int flags) | 
 | { | 
 |     ulong start = 0; | 
 | 	ulong end = 0; | 
 | 	lbaint_t blkcnt = 0; | 
 | 	uchar buf_s[512] = {0}; | 
 | 	uchar buf_e[512] = {0}; | 
 | 	uint blklen = 0; | 
 | 	uint len_s = 0; | 
 |     uint len_e = 0; | 
 | 	int ret = 0; | 
 | 	size_t size = *length; | 
 |     struct mmc *mmc = find_mmc_device(0); | 
 |  | 
 | 	if (!mmc) | 
 | 		return NO_CARD_ERR; | 
 |  | 
 | 	blklen = mmc->read_bl_len; | 
 |     if((size == 0)||(src > mmc->capacity)||((src+size)> mmc->capacity)) | 
 | 	{ | 
 |         printf("length is error\n"); | 
 | 		return LEN_ERR; | 
 | 	} | 
 |     start = src &(~(blklen-1));  /*ÆðʼµØÖ·¶ÔÆëµ½¿é±ß½ç*/ | 
 | 	end = (src+size-1)&(~(blklen-1));  /*½áÊøµØÖ·¶ÔÆëµ½¿é±ß½ç*/ | 
 | 	if(size%mmc->read_bl_len) | 
 | 	    blkcnt = (size/blklen)+1; | 
 | 	else | 
 | 		blkcnt = size/blklen;     /*¼ÆËãʵ¼ÊдÈë¿éÊý*/ | 
 |  | 
 | 	len_s = blklen-(src-start);   /*Æðʼ¿éʵ¼Ê³¤¶È*/ | 
 | 	len_e = (src+size)-end;     /*½áÊø¿éʵ¼Ê³¤¶È*/ | 
 |  | 
 | 	if((start == src)&&(size%blklen == 0)) | 
 | 	{ | 
 |         ret = mmc_bwrite(0, start/blklen, blkcnt, dst);  /*°´Õû¿é¶ÔÆëдÈë*/ | 
 | 		if(ret == blkcnt) | 
 | 		    return 0; | 
 | 		else | 
 | 		    return -1; | 
 |  | 
 | 	} | 
 | 	else if (blkcnt == 1)                 /*µ¥¿é²»¶ÔÆëдÈë*/ | 
 |     { | 
 |         ret = mmc_bread(0, start/blklen, 1, (uchar *)buf_s); | 
 | 		memcpy((uchar *)buf_s+src-start,dst ,size); | 
 | 		ret += mmc_bwrite(0, start/blklen, 1, (uchar *)buf_s); | 
 | 		if(ret == 2) | 
 | 		    return 0; | 
 | 		else | 
 | 		    return -1; | 
 |     } | 
 | 	else                                     /*¶à¿é²»¶ÔÆëдÈë*/ | 
 | 	{ | 
 | 	    ret = mmc_bread(0, start/blklen, 1, (uchar *)buf_s); | 
 | 		ret += mmc_bread(0, end/blklen, 1, (uchar *)buf_e); | 
 | 		ret += mmc_bwrite(0, (start+blklen)/blklen, blkcnt-2, dst+len_s); | 
 |  | 
 | 		memcpy((uchar *)buf_s+src-start,dst,len_s); | 
 | 		memcpy((uchar *)buf_e,dst+len_s+(blkcnt-2)*blklen,len_e); | 
 | 		ret += mmc_bwrite(0, start/blklen, 1, (uchar *)buf_s); | 
 | 		ret += mmc_bwrite(0, end/blklen, 1, (uchar *)buf_e); | 
 |         if(ret == blkcnt+2) | 
 | 		    return 0; | 
 | 		else | 
 | 		    return -1; | 
 | 	} | 
 | } | 
 |  |