|  | /* | 
|  | * JFFS2 -- Journalling Flash File System, Version 2. | 
|  | * | 
|  | * Copyright © 2001-2007 Red Hat, Inc. | 
|  | * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org> | 
|  | * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>, | 
|  | *		    University of Szeged, Hungary | 
|  | * | 
|  | * Created by Arjan van de Ven <arjan@infradead.org> | 
|  | * | 
|  | * For licensing information, see the file 'LICENCE' in this directory. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include "compr.h" | 
|  |  | 
|  | static DEFINE_SPINLOCK(jffs2_compressor_list_lock); | 
|  |  | 
|  | /* Available compressors are on this list */ | 
|  | static LIST_HEAD(jffs2_compressor_list); | 
|  |  | 
|  | /* Actual compression mode */ | 
|  | static int jffs2_compression_mode = JFFS2_COMPR_MODE_PRIORITY; | 
|  |  | 
|  | /* Statistics for blocks stored without compression */ | 
|  | static uint32_t none_stat_compr_blocks=0,none_stat_decompr_blocks=0,none_stat_compr_size=0; | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Return 1 to use this compression | 
|  | */ | 
|  | static int jffs2_is_best_compression(struct jffs2_compressor *this, | 
|  | struct jffs2_compressor *best, uint32_t size, uint32_t bestsize) | 
|  | { | 
|  | switch (jffs2_compression_mode) { | 
|  | case JFFS2_COMPR_MODE_SIZE: | 
|  | if (bestsize > size) | 
|  | return 1; | 
|  | return 0; | 
|  | case JFFS2_COMPR_MODE_FAVOURLZO: | 
|  | if ((this->compr == JFFS2_COMPR_LZO) && (bestsize > size)) | 
|  | return 1; | 
|  | if ((best->compr != JFFS2_COMPR_LZO) && (bestsize > size)) | 
|  | return 1; | 
|  | if ((this->compr == JFFS2_COMPR_LZO) && (bestsize > (size * FAVOUR_LZO_PERCENT / 100))) | 
|  | return 1; | 
|  | if ((bestsize * FAVOUR_LZO_PERCENT / 100) > size) | 
|  | return 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | /* Shouldn't happen */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * jffs2_selected_compress: | 
|  | * @compr: Explicit compression type to use (ie, JFFS2_COMPR_ZLIB). | 
|  | *	If 0, just take the first available compression mode. | 
|  | * @data_in: Pointer to uncompressed data | 
|  | * @cpage_out: Pointer to returned pointer to buffer for compressed data | 
|  | * @datalen: On entry, holds the amount of data available for compression. | 
|  | *	On exit, expected to hold the amount of data actually compressed. | 
|  | * @cdatalen: On entry, holds the amount of space available for compressed | 
|  | *	data. On exit, expected to hold the actual size of the compressed | 
|  | *	data. | 
|  | * | 
|  | * Returns: the compression type used.  Zero is used to show that the data | 
|  | * could not be compressed; probably because we couldn't find the requested | 
|  | * compression mode. | 
|  | */ | 
|  | static int jffs2_selected_compress(u8 compr, unsigned char *data_in, | 
|  | unsigned char **cpage_out, u32 *datalen, u32 *cdatalen) | 
|  | { | 
|  | struct jffs2_compressor *this; | 
|  | int err, ret = JFFS2_COMPR_NONE; | 
|  | uint32_t orig_slen, orig_dlen; | 
|  | char *output_buf; | 
|  |  | 
|  | output_buf = kmalloc(*cdatalen, GFP_KERNEL); | 
|  | if (!output_buf) { | 
|  | pr_warn("No memory for compressor allocation. Compression failed.\n"); | 
|  | return ret; | 
|  | } | 
|  | orig_slen = *datalen; | 
|  | orig_dlen = *cdatalen; | 
|  | spin_lock(&jffs2_compressor_list_lock); | 
|  | list_for_each_entry(this, &jffs2_compressor_list, list) { | 
|  | /* Skip decompress-only and disabled modules */ | 
|  | if (!this->compress || this->disabled) | 
|  | continue; | 
|  |  | 
|  | /* Skip if not the desired compression type */ | 
|  | if (compr && (compr != this->compr)) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * Either compression type was unspecified, or we found our | 
|  | * compressor; either way, we're good to go. | 
|  | */ | 
|  | this->usecount++; | 
|  | spin_unlock(&jffs2_compressor_list_lock); | 
|  |  | 
|  | *datalen  = orig_slen; | 
|  | *cdatalen = orig_dlen; | 
|  | err = this->compress(data_in, output_buf, datalen, cdatalen); | 
|  |  | 
|  | spin_lock(&jffs2_compressor_list_lock); | 
|  | this->usecount--; | 
|  | if (!err) { | 
|  | /* Success */ | 
|  | ret = this->compr; | 
|  | this->stat_compr_blocks++; | 
|  | this->stat_compr_orig_size += *datalen; | 
|  | this->stat_compr_new_size += *cdatalen; | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock(&jffs2_compressor_list_lock); | 
|  | if (ret == JFFS2_COMPR_NONE) | 
|  | kfree(output_buf); | 
|  | else | 
|  | *cpage_out = output_buf; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* jffs2_compress: | 
|  | * @data_in: Pointer to uncompressed data | 
|  | * @cpage_out: Pointer to returned pointer to buffer for compressed data | 
|  | * @datalen: On entry, holds the amount of data available for compression. | 
|  | *	On exit, expected to hold the amount of data actually compressed. | 
|  | * @cdatalen: On entry, holds the amount of space available for compressed | 
|  | *	data. On exit, expected to hold the actual size of the compressed | 
|  | *	data. | 
|  | * | 
|  | * Returns: Lower byte to be stored with data indicating compression type used. | 
|  | * Zero is used to show that the data could not be compressed - the | 
|  | * compressed version was actually larger than the original. | 
|  | * Upper byte will be used later. (soon) | 
|  | * | 
|  | * If the cdata buffer isn't large enough to hold all the uncompressed data, | 
|  | * jffs2_compress should compress as much as will fit, and should set | 
|  | * *datalen accordingly to show the amount of data which were compressed. | 
|  | */ | 
|  | uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, | 
|  | unsigned char *data_in, unsigned char **cpage_out, | 
|  | uint32_t *datalen, uint32_t *cdatalen) | 
|  | { | 
|  | int ret = JFFS2_COMPR_NONE; | 
|  | int mode, compr_ret; | 
|  | struct jffs2_compressor *this, *best=NULL; | 
|  | unsigned char *output_buf = NULL, *tmp_buf; | 
|  | uint32_t orig_slen, orig_dlen; | 
|  | uint32_t best_slen=0, best_dlen=0; | 
|  |  | 
|  | if (c->mount_opts.override_compr) | 
|  | mode = c->mount_opts.compr; | 
|  | else | 
|  | mode = jffs2_compression_mode; | 
|  |  | 
|  | switch (mode) { | 
|  | case JFFS2_COMPR_MODE_NONE: | 
|  | break; | 
|  | case JFFS2_COMPR_MODE_PRIORITY: | 
|  | ret = jffs2_selected_compress(0, data_in, cpage_out, datalen, | 
|  | cdatalen); | 
|  | break; | 
|  | case JFFS2_COMPR_MODE_SIZE: | 
|  | case JFFS2_COMPR_MODE_FAVOURLZO: | 
|  | orig_slen = *datalen; | 
|  | orig_dlen = *cdatalen; | 
|  | spin_lock(&jffs2_compressor_list_lock); | 
|  | list_for_each_entry(this, &jffs2_compressor_list, list) { | 
|  | /* Skip decompress-only backwards-compatibility and disabled modules */ | 
|  | if ((!this->compress)||(this->disabled)) | 
|  | continue; | 
|  | /* Allocating memory for output buffer if necessary */ | 
|  | if ((this->compr_buf_size < orig_slen) && (this->compr_buf)) { | 
|  | spin_unlock(&jffs2_compressor_list_lock); | 
|  | kfree(this->compr_buf); | 
|  | spin_lock(&jffs2_compressor_list_lock); | 
|  | this->compr_buf_size=0; | 
|  | this->compr_buf=NULL; | 
|  | } | 
|  | if (!this->compr_buf) { | 
|  | spin_unlock(&jffs2_compressor_list_lock); | 
|  | tmp_buf = kmalloc(orig_slen, GFP_KERNEL); | 
|  | spin_lock(&jffs2_compressor_list_lock); | 
|  | if (!tmp_buf) { | 
|  | pr_warn("No memory for compressor allocation. (%d bytes)\n", | 
|  | orig_slen); | 
|  | continue; | 
|  | } | 
|  | else { | 
|  | this->compr_buf = tmp_buf; | 
|  | this->compr_buf_size = orig_slen; | 
|  | } | 
|  | } | 
|  | this->usecount++; | 
|  | spin_unlock(&jffs2_compressor_list_lock); | 
|  | *datalen  = orig_slen; | 
|  | *cdatalen = orig_dlen; | 
|  | compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen); | 
|  | spin_lock(&jffs2_compressor_list_lock); | 
|  | this->usecount--; | 
|  | if (!compr_ret) { | 
|  | if (((!best_dlen) || jffs2_is_best_compression(this, best, *cdatalen, best_dlen)) | 
|  | && (*cdatalen < *datalen)) { | 
|  | best_dlen = *cdatalen; | 
|  | best_slen = *datalen; | 
|  | best = this; | 
|  | } | 
|  | } | 
|  | } | 
|  | if (best_dlen) { | 
|  | *cdatalen = best_dlen; | 
|  | *datalen  = best_slen; | 
|  | output_buf = best->compr_buf; | 
|  | best->compr_buf = NULL; | 
|  | best->compr_buf_size = 0; | 
|  | best->stat_compr_blocks++; | 
|  | best->stat_compr_orig_size += best_slen; | 
|  | best->stat_compr_new_size  += best_dlen; | 
|  | ret = best->compr; | 
|  | *cpage_out = output_buf; | 
|  | } | 
|  | spin_unlock(&jffs2_compressor_list_lock); | 
|  | break; | 
|  | case JFFS2_COMPR_MODE_FORCELZO: | 
|  | ret = jffs2_selected_compress(JFFS2_COMPR_LZO, data_in, | 
|  | cpage_out, datalen, cdatalen); | 
|  | break; | 
|  | case JFFS2_COMPR_MODE_FORCEZLIB: | 
|  | ret = jffs2_selected_compress(JFFS2_COMPR_ZLIB, data_in, | 
|  | cpage_out, datalen, cdatalen); | 
|  | break; | 
|  | default: | 
|  | pr_err("unknown compression mode\n"); | 
|  | } | 
|  |  | 
|  | if (ret == JFFS2_COMPR_NONE) { | 
|  | *cpage_out = data_in; | 
|  | *datalen = *cdatalen; | 
|  | none_stat_compr_blocks++; | 
|  | none_stat_compr_size += *datalen; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, | 
|  | uint16_t comprtype, unsigned char *cdata_in, | 
|  | unsigned char *data_out, uint32_t cdatalen, uint32_t datalen) | 
|  | { | 
|  | struct jffs2_compressor *this; | 
|  | int ret; | 
|  |  | 
|  | /* Older code had a bug where it would write non-zero 'usercompr' | 
|  | fields. Deal with it. */ | 
|  | if ((comprtype & 0xff) <= JFFS2_COMPR_ZLIB) | 
|  | comprtype &= 0xff; | 
|  |  | 
|  | switch (comprtype & 0xff) { | 
|  | case JFFS2_COMPR_NONE: | 
|  | /* This should be special-cased elsewhere, but we might as well deal with it */ | 
|  | memcpy(data_out, cdata_in, datalen); | 
|  | none_stat_decompr_blocks++; | 
|  | break; | 
|  | case JFFS2_COMPR_ZERO: | 
|  | memset(data_out, 0, datalen); | 
|  | break; | 
|  | default: | 
|  | spin_lock(&jffs2_compressor_list_lock); | 
|  | list_for_each_entry(this, &jffs2_compressor_list, list) { | 
|  | if (comprtype == this->compr) { | 
|  | this->usecount++; | 
|  | spin_unlock(&jffs2_compressor_list_lock); | 
|  | ret = this->decompress(cdata_in, data_out, cdatalen, datalen); | 
|  | spin_lock(&jffs2_compressor_list_lock); | 
|  | if (ret) { | 
|  | pr_warn("Decompressor \"%s\" returned %d\n", | 
|  | this->name, ret); | 
|  | } | 
|  | else { | 
|  | this->stat_decompr_blocks++; | 
|  | } | 
|  | this->usecount--; | 
|  | spin_unlock(&jffs2_compressor_list_lock); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | pr_warn("compression type 0x%02x not available\n", comprtype); | 
|  | spin_unlock(&jffs2_compressor_list_lock); | 
|  | return -EIO; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int jffs2_register_compressor(struct jffs2_compressor *comp) | 
|  | { | 
|  | struct jffs2_compressor *this; | 
|  |  | 
|  | if (!comp->name) { | 
|  | pr_warn("NULL compressor name at registering JFFS2 compressor. Failed.\n"); | 
|  | return -1; | 
|  | } | 
|  | comp->compr_buf_size=0; | 
|  | comp->compr_buf=NULL; | 
|  | comp->usecount=0; | 
|  | comp->stat_compr_orig_size=0; | 
|  | comp->stat_compr_new_size=0; | 
|  | comp->stat_compr_blocks=0; | 
|  | comp->stat_decompr_blocks=0; | 
|  | jffs2_dbg(1, "Registering JFFS2 compressor \"%s\"\n", comp->name); | 
|  |  | 
|  | spin_lock(&jffs2_compressor_list_lock); | 
|  |  | 
|  | list_for_each_entry(this, &jffs2_compressor_list, list) { | 
|  | if (this->priority < comp->priority) { | 
|  | list_add(&comp->list, this->list.prev); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | list_add_tail(&comp->list, &jffs2_compressor_list); | 
|  | out: | 
|  | D2(list_for_each_entry(this, &jffs2_compressor_list, list) { | 
|  | printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); | 
|  | }) | 
|  |  | 
|  | spin_unlock(&jffs2_compressor_list_lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int jffs2_unregister_compressor(struct jffs2_compressor *comp) | 
|  | { | 
|  | D2(struct jffs2_compressor *this); | 
|  |  | 
|  | jffs2_dbg(1, "Unregistering JFFS2 compressor \"%s\"\n", comp->name); | 
|  |  | 
|  | spin_lock(&jffs2_compressor_list_lock); | 
|  |  | 
|  | if (comp->usecount) { | 
|  | spin_unlock(&jffs2_compressor_list_lock); | 
|  | pr_warn("Compressor module is in use. Unregister failed.\n"); | 
|  | return -1; | 
|  | } | 
|  | list_del(&comp->list); | 
|  |  | 
|  | D2(list_for_each_entry(this, &jffs2_compressor_list, list) { | 
|  | printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); | 
|  | }) | 
|  | spin_unlock(&jffs2_compressor_list_lock); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig) | 
|  | { | 
|  | if (orig != comprbuf) | 
|  | kfree(comprbuf); | 
|  | } | 
|  |  | 
|  | int __init jffs2_compressors_init(void) | 
|  | { | 
|  | /* Registering compressors */ | 
|  | #ifdef CONFIG_JFFS2_ZLIB | 
|  | jffs2_zlib_init(); | 
|  | #endif | 
|  | #ifdef CONFIG_JFFS2_RTIME | 
|  | jffs2_rtime_init(); | 
|  | #endif | 
|  | #ifdef CONFIG_JFFS2_RUBIN | 
|  | jffs2_rubinmips_init(); | 
|  | jffs2_dynrubin_init(); | 
|  | #endif | 
|  | #ifdef CONFIG_JFFS2_LZO | 
|  | jffs2_lzo_init(); | 
|  | #endif | 
|  | #ifdef CONFIG_JFFS2_LZMA | 
|  | jffs2_lzma_init(); | 
|  | #endif | 
|  | /* Setting default compression mode */ | 
|  | #ifdef CONFIG_JFFS2_CMODE_NONE | 
|  | jffs2_compression_mode = JFFS2_COMPR_MODE_NONE; | 
|  | jffs2_dbg(1, "default compression mode: none\n"); | 
|  | #else | 
|  | #ifdef CONFIG_JFFS2_CMODE_SIZE | 
|  | jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE; | 
|  | jffs2_dbg(1, "default compression mode: size\n"); | 
|  | #else | 
|  | #ifdef CONFIG_JFFS2_CMODE_FAVOURLZO | 
|  | jffs2_compression_mode = JFFS2_COMPR_MODE_FAVOURLZO; | 
|  | jffs2_dbg(1, "default compression mode: favourlzo\n"); | 
|  | #else | 
|  | jffs2_dbg(1, "default compression mode: priority\n"); | 
|  | #endif | 
|  | #endif | 
|  | #endif | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int jffs2_compressors_exit(void) | 
|  | { | 
|  | /* Unregistering compressors */ | 
|  | #ifdef CONFIG_JFFS2_LZMA | 
|  | jffs2_lzma_exit(); | 
|  | #endif | 
|  | #ifdef CONFIG_JFFS2_LZO | 
|  | jffs2_lzo_exit(); | 
|  | #endif | 
|  | #ifdef CONFIG_JFFS2_RUBIN | 
|  | jffs2_dynrubin_exit(); | 
|  | jffs2_rubinmips_exit(); | 
|  | #endif | 
|  | #ifdef CONFIG_JFFS2_RTIME | 
|  | jffs2_rtime_exit(); | 
|  | #endif | 
|  | #ifdef CONFIG_JFFS2_ZLIB | 
|  | jffs2_zlib_exit(); | 
|  | #endif | 
|  | return 0; | 
|  | } |