| /* Low-level functions for atomic operations. Mips version. |
| Copyright (C) 2005-2016 Free Software Foundation, Inc. |
| This file is part of the GNU C Library. |
| |
| The GNU C Library is free software; you can redistribute it and/or |
| modify it under the terms of the GNU Lesser General Public |
| License as published by the Free Software Foundation; either |
| version 2.1 of the License, or (at your option) any later version. |
| |
| The GNU C Library is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| Lesser General Public License for more details. |
| |
| You should have received a copy of the GNU Lesser General Public |
| License along with the GNU C Library. If not, see |
| <http://www.gnu.org/licenses/>. */ |
| |
| #ifndef _MIPS_ATOMIC_MACHINE_H |
| #define _MIPS_ATOMIC_MACHINE_H 1 |
| |
| #include <stdint.h> |
| #include <inttypes.h> |
| #include <sgidefs.h> |
| |
| typedef int32_t atomic32_t; |
| typedef uint32_t uatomic32_t; |
| typedef int_fast32_t atomic_fast32_t; |
| typedef uint_fast32_t uatomic_fast32_t; |
| |
| typedef int64_t atomic64_t; |
| typedef uint64_t uatomic64_t; |
| typedef int_fast64_t atomic_fast64_t; |
| typedef uint_fast64_t uatomic_fast64_t; |
| |
| typedef intptr_t atomicptr_t; |
| typedef uintptr_t uatomicptr_t; |
| typedef intmax_t atomic_max_t; |
| typedef uintmax_t uatomic_max_t; |
| |
| #if _MIPS_SIM == _ABIO32 && __mips < 2 |
| #define MIPS_PUSH_MIPS2 ".set mips2\n\t" |
| #else |
| #define MIPS_PUSH_MIPS2 |
| #endif |
| |
| #if _MIPS_SIM == _ABIO32 || _MIPS_SIM == _ABIN32 |
| #define __HAVE_64B_ATOMICS 0 |
| #else |
| #define __HAVE_64B_ATOMICS 1 |
| #endif |
| |
| /* See the comments in <sys/asm.h> about the use of the sync instruction. */ |
| #ifndef MIPS_SYNC |
| # define MIPS_SYNC sync |
| #endif |
| |
| /* Certain revisions of the R10000 Processor need an LL/SC Workaround |
| enabled. Revisions before 3.0 misbehave on atomic operations, and |
| Revs 2.6 and lower deadlock after several seconds due to other errata. |
| |
| To quote the R10K Errata: |
| Workaround: The basic idea is to inhibit the four instructions |
| from simultaneously becoming active in R10000. Padding all |
| ll/sc sequences with nops or changing the looping branch in the |
| routines to a branch likely (which is always predicted taken |
| by R10000) will work. The nops should go after the loop, and the |
| number of them should be 28. This number could be decremented for |
| each additional instruction in the ll/sc loop such as the lock |
| modifier(s) between the ll and sc, the looping branch and its |
| delay slot. For typical short routines with one ll/sc loop, any |
| instructions after the loop could also count as a decrement. The |
| nop workaround pollutes the cache more but would be a few cycles |
| faster if all the code is in the cache and the looping branch |
| is predicted not taken. */ |
| |
| |
| #ifdef _MIPS_ARCH_R10000 |
| #define R10K_BEQZ_INSN "beqzl" |
| #else |
| #define R10K_BEQZ_INSN "beqz" |
| #endif |
| |
| #define MIPS_SYNC_STR_2(X) #X |
| #define MIPS_SYNC_STR_1(X) MIPS_SYNC_STR_2(X) |
| #define MIPS_SYNC_STR MIPS_SYNC_STR_1(MIPS_SYNC) |
| |
| #if __GNUC_PREREQ (4, 8) || defined __mips16 |
| /* The __atomic_* builtins are available in GCC 4.7 and later, but MIPS |
| support for their efficient implementation was added only in GCC 4.8. |
| We still want to use them even with GCC 4.7 for MIPS16 code where we |
| have no assembly alternative available and want to avoid the __sync_* |
| builtins if at all possible. */ |
| |
| #define USE_ATOMIC_COMPILER_BUILTINS 1 |
| |
| /* Compare and exchange. |
| For all "bool" routines, we return FALSE if exchange succesful. */ |
| |
| # define __arch_compare_and_exchange_bool_8_int(mem, newval, oldval, model) \ |
| (abort (), 0) |
| |
| # define __arch_compare_and_exchange_bool_16_int(mem, newval, oldval, model) \ |
| (abort (), 0) |
| |
| # define __arch_compare_and_exchange_bool_32_int(mem, newval, oldval, model) \ |
| ({ \ |
| typeof (*mem) __oldval = (oldval); \ |
| !__atomic_compare_exchange_n (mem, (void *) &__oldval, newval, 0, \ |
| model, __ATOMIC_RELAXED); \ |
| }) |
| |
| # define __arch_compare_and_exchange_val_8_int(mem, newval, oldval, model) \ |
| (abort (), (typeof(*mem)) 0) |
| |
| # define __arch_compare_and_exchange_val_16_int(mem, newval, oldval, model) \ |
| (abort (), (typeof(*mem)) 0) |
| |
| # define __arch_compare_and_exchange_val_32_int(mem, newval, oldval, model) \ |
| ({ \ |
| typeof (*mem) __oldval = (oldval); \ |
| __atomic_compare_exchange_n (mem, (void *) &__oldval, newval, 0, \ |
| model, __ATOMIC_RELAXED); \ |
| __oldval; \ |
| }) |
| |
| # if _MIPS_SIM == _ABIO32 |
| /* We can't do an atomic 64-bit operation in O32. */ |
| # define __arch_compare_and_exchange_bool_64_int(mem, newval, oldval, model) \ |
| (abort (), 0) |
| # define __arch_compare_and_exchange_val_64_int(mem, newval, oldval, model) \ |
| (abort (), (typeof(*mem)) 0) |
| # else |
| # define __arch_compare_and_exchange_bool_64_int(mem, newval, oldval, model) \ |
| __arch_compare_and_exchange_bool_32_int (mem, newval, oldval, model) |
| # define __arch_compare_and_exchange_val_64_int(mem, newval, oldval, model) \ |
| __arch_compare_and_exchange_val_32_int (mem, newval, oldval, model) |
| # endif |
| |
| /* Compare and exchange with "acquire" semantics, ie barrier after. */ |
| |
| # define atomic_compare_and_exchange_bool_acq(mem, new, old) \ |
| __atomic_bool_bysize (__arch_compare_and_exchange_bool, int, \ |
| mem, new, old, __ATOMIC_ACQUIRE) |
| |
| # define atomic_compare_and_exchange_val_acq(mem, new, old) \ |
| __atomic_val_bysize (__arch_compare_and_exchange_val, int, \ |
| mem, new, old, __ATOMIC_ACQUIRE) |
| |
| /* Compare and exchange with "release" semantics, ie barrier before. */ |
| |
| # define atomic_compare_and_exchange_bool_rel(mem, new, old) \ |
| __atomic_bool_bysize (__arch_compare_and_exchange_bool, int, \ |
| mem, new, old, __ATOMIC_RELEASE) |
| |
| # define atomic_compare_and_exchange_val_rel(mem, new, old) \ |
| __atomic_val_bysize (__arch_compare_and_exchange_val, int, \ |
| mem, new, old, __ATOMIC_RELEASE) |
| |
| |
| /* Atomic exchange (without compare). */ |
| |
| # define __arch_exchange_8_int(mem, newval, model) \ |
| (abort (), (typeof(*mem)) 0) |
| |
| # define __arch_exchange_16_int(mem, newval, model) \ |
| (abort (), (typeof(*mem)) 0) |
| |
| # define __arch_exchange_32_int(mem, newval, model) \ |
| __atomic_exchange_n (mem, newval, model) |
| |
| # if _MIPS_SIM == _ABIO32 |
| /* We can't do an atomic 64-bit operation in O32. */ |
| # define __arch_exchange_64_int(mem, newval, model) \ |
| (abort (), (typeof(*mem)) 0) |
| # else |
| # define __arch_exchange_64_int(mem, newval, model) \ |
| __atomic_exchange_n (mem, newval, model) |
| # endif |
| |
| # define atomic_exchange_acq(mem, value) \ |
| __atomic_val_bysize (__arch_exchange, int, mem, value, __ATOMIC_ACQUIRE) |
| |
| # define atomic_exchange_rel(mem, value) \ |
| __atomic_val_bysize (__arch_exchange, int, mem, value, __ATOMIC_RELEASE) |
| |
| |
| /* Atomically add value and return the previous (unincremented) value. */ |
| |
| # define __arch_exchange_and_add_8_int(mem, value, model) \ |
| (abort (), (typeof(*mem)) 0) |
| |
| # define __arch_exchange_and_add_16_int(mem, value, model) \ |
| (abort (), (typeof(*mem)) 0) |
| |
| # define __arch_exchange_and_add_32_int(mem, value, model) \ |
| __atomic_fetch_add (mem, value, model) |
| |
| # if _MIPS_SIM == _ABIO32 |
| /* We can't do an atomic 64-bit operation in O32. */ |
| # define __arch_exchange_and_add_64_int(mem, value, model) \ |
| (abort (), (typeof(*mem)) 0) |
| # else |
| # define __arch_exchange_and_add_64_int(mem, value, model) \ |
| __atomic_fetch_add (mem, value, model) |
| # endif |
| |
| # define atomic_exchange_and_add_acq(mem, value) \ |
| __atomic_val_bysize (__arch_exchange_and_add, int, mem, value, \ |
| __ATOMIC_ACQUIRE) |
| |
| # define atomic_exchange_and_add_rel(mem, value) \ |
| __atomic_val_bysize (__arch_exchange_and_add, int, mem, value, \ |
| __ATOMIC_RELEASE) |
| |
| #else /* !__mips16 && !__GNUC_PREREQ (4, 8) */ |
| /* This implementation using inline assembly will be removed once glibc |
| requires GCC 4.8 or later to build. */ |
| |
| #define USE_ATOMIC_COMPILER_BUILTINS 0 |
| |
| /* Compare and exchange. For all of the "xxx" routines, we expect a |
| "__prev" and a "__cmp" variable to be provided by the enclosing scope, |
| in which values are returned. */ |
| |
| # define __arch_compare_and_exchange_xxx_8_int(mem, newval, oldval, rel, acq) \ |
| (abort (), __prev = 0, __cmp = 0, (void) __cmp) |
| |
| # define __arch_compare_and_exchange_xxx_16_int(mem, newval, oldval, rel, acq) \ |
| (abort (), __prev = 0, __cmp = 0, (void) __cmp) |
| |
| # define __arch_compare_and_exchange_xxx_32_int(mem, newval, oldval, rel, acq) \ |
| __asm__ __volatile__ ( \ |
| ".set push\n\t" \ |
| MIPS_PUSH_MIPS2 \ |
| rel "\n" \ |
| "1:\t" \ |
| "ll %0,%5\n\t" \ |
| "move %1,$0\n\t" \ |
| "bne %0,%3,2f\n\t" \ |
| "move %1,%4\n\t" \ |
| "sc %1,%2\n\t" \ |
| R10K_BEQZ_INSN" %1,1b\n" \ |
| acq "\n\t" \ |
| ".set pop\n" \ |
| "2:\n\t" \ |
| : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem) \ |
| : "r" (oldval), "r" (newval), "m" (*mem) \ |
| : "memory") |
| |
| # if _MIPS_SIM == _ABIO32 |
| /* We can't do an atomic 64-bit operation in O32. */ |
| # define __arch_compare_and_exchange_xxx_64_int(mem, newval, oldval, rel, acq) \ |
| (abort (), __prev = 0, __cmp = 0, (void) __cmp) |
| # else |
| # define __arch_compare_and_exchange_xxx_64_int(mem, newval, oldval, rel, acq) \ |
| __asm__ __volatile__ ("\n" \ |
| ".set push\n\t" \ |
| MIPS_PUSH_MIPS2 \ |
| rel "\n" \ |
| "1:\t" \ |
| "lld %0,%5\n\t" \ |
| "move %1,$0\n\t" \ |
| "bne %0,%3,2f\n\t" \ |
| "move %1,%4\n\t" \ |
| "scd %1,%2\n\t" \ |
| R10K_BEQZ_INSN" %1,1b\n" \ |
| acq "\n\t" \ |
| ".set pop\n" \ |
| "2:\n\t" \ |
| : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem) \ |
| : "r" (oldval), "r" (newval), "m" (*mem) \ |
| : "memory") |
| # endif |
| |
| /* For all "bool" routines, we return FALSE if exchange succesful. */ |
| |
| # define __arch_compare_and_exchange_bool_8_int(mem, new, old, rel, acq) \ |
| ({ typeof (*mem) __prev __attribute__ ((unused)); int __cmp; \ |
| __arch_compare_and_exchange_xxx_8_int(mem, new, old, rel, acq); \ |
| !__cmp; }) |
| |
| # define __arch_compare_and_exchange_bool_16_int(mem, new, old, rel, acq) \ |
| ({ typeof (*mem) __prev __attribute__ ((unused)); int __cmp; \ |
| __arch_compare_and_exchange_xxx_16_int(mem, new, old, rel, acq); \ |
| !__cmp; }) |
| |
| # define __arch_compare_and_exchange_bool_32_int(mem, new, old, rel, acq) \ |
| ({ typeof (*mem) __prev __attribute__ ((unused)); int __cmp; \ |
| __arch_compare_and_exchange_xxx_32_int(mem, new, old, rel, acq); \ |
| !__cmp; }) |
| |
| # define __arch_compare_and_exchange_bool_64_int(mem, new, old, rel, acq) \ |
| ({ typeof (*mem) __prev __attribute__ ((unused)); int __cmp; \ |
| __arch_compare_and_exchange_xxx_64_int(mem, new, old, rel, acq); \ |
| !__cmp; }) |
| |
| /* For all "val" routines, return the old value whether exchange |
| successful or not. */ |
| |
| # define __arch_compare_and_exchange_val_8_int(mem, new, old, rel, acq) \ |
| ({ typeof (*mem) __prev; int __cmp; \ |
| __arch_compare_and_exchange_xxx_8_int(mem, new, old, rel, acq); \ |
| (typeof (*mem))__prev; }) |
| |
| # define __arch_compare_and_exchange_val_16_int(mem, new, old, rel, acq) \ |
| ({ typeof (*mem) __prev; int __cmp; \ |
| __arch_compare_and_exchange_xxx_16_int(mem, new, old, rel, acq); \ |
| (typeof (*mem))__prev; }) |
| |
| # define __arch_compare_and_exchange_val_32_int(mem, new, old, rel, acq) \ |
| ({ typeof (*mem) __prev; int __cmp; \ |
| __arch_compare_and_exchange_xxx_32_int(mem, new, old, rel, acq); \ |
| (typeof (*mem))__prev; }) |
| |
| # define __arch_compare_and_exchange_val_64_int(mem, new, old, rel, acq) \ |
| ({ typeof (*mem) __prev; int __cmp; \ |
| __arch_compare_and_exchange_xxx_64_int(mem, new, old, rel, acq); \ |
| (typeof (*mem))__prev; }) |
| |
| /* Compare and exchange with "acquire" semantics, ie barrier after. */ |
| |
| # define atomic_compare_and_exchange_bool_acq(mem, new, old) \ |
| __atomic_bool_bysize (__arch_compare_and_exchange_bool, int, \ |
| mem, new, old, "", MIPS_SYNC_STR) |
| |
| # define atomic_compare_and_exchange_val_acq(mem, new, old) \ |
| __atomic_val_bysize (__arch_compare_and_exchange_val, int, \ |
| mem, new, old, "", MIPS_SYNC_STR) |
| |
| /* Compare and exchange with "release" semantics, ie barrier before. */ |
| |
| # define atomic_compare_and_exchange_bool_rel(mem, new, old) \ |
| __atomic_bool_bysize (__arch_compare_and_exchange_bool, int, \ |
| mem, new, old, MIPS_SYNC_STR, "") |
| |
| # define atomic_compare_and_exchange_val_rel(mem, new, old) \ |
| __atomic_val_bysize (__arch_compare_and_exchange_val, int, \ |
| mem, new, old, MIPS_SYNC_STR, "") |
| |
| |
| |
| /* Atomic exchange (without compare). */ |
| |
| # define __arch_exchange_xxx_8_int(mem, newval, rel, acq) \ |
| (abort (), (typeof(*mem)) 0) |
| |
| # define __arch_exchange_xxx_16_int(mem, newval, rel, acq) \ |
| (abort (), (typeof(*mem)) 0) |
| |
| # define __arch_exchange_xxx_32_int(mem, newval, rel, acq) \ |
| ({ typeof (*mem) __prev; int __cmp; \ |
| __asm__ __volatile__ ("\n" \ |
| ".set push\n\t" \ |
| MIPS_PUSH_MIPS2 \ |
| rel "\n" \ |
| "1:\t" \ |
| "ll %0,%4\n\t" \ |
| "move %1,%3\n\t" \ |
| "sc %1,%2\n\t" \ |
| R10K_BEQZ_INSN" %1,1b\n" \ |
| acq "\n\t" \ |
| ".set pop\n" \ |
| "2:\n\t" \ |
| : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem) \ |
| : "r" (newval), "m" (*mem) \ |
| : "memory"); \ |
| __prev; }) |
| |
| # if _MIPS_SIM == _ABIO32 |
| /* We can't do an atomic 64-bit operation in O32. */ |
| # define __arch_exchange_xxx_64_int(mem, newval, rel, acq) \ |
| (abort (), (typeof(*mem)) 0) |
| # else |
| # define __arch_exchange_xxx_64_int(mem, newval, rel, acq) \ |
| ({ typeof (*mem) __prev; int __cmp; \ |
| __asm__ __volatile__ ("\n" \ |
| ".set push\n\t" \ |
| MIPS_PUSH_MIPS2 \ |
| rel "\n" \ |
| "1:\n" \ |
| "lld %0,%4\n\t" \ |
| "move %1,%3\n\t" \ |
| "scd %1,%2\n\t" \ |
| R10K_BEQZ_INSN" %1,1b\n" \ |
| acq "\n\t" \ |
| ".set pop\n" \ |
| "2:\n\t" \ |
| : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem) \ |
| : "r" (newval), "m" (*mem) \ |
| : "memory"); \ |
| __prev; }) |
| # endif |
| |
| # define atomic_exchange_acq(mem, value) \ |
| __atomic_val_bysize (__arch_exchange_xxx, int, mem, value, "", MIPS_SYNC_STR) |
| |
| # define atomic_exchange_rel(mem, value) \ |
| __atomic_val_bysize (__arch_exchange_xxx, int, mem, value, MIPS_SYNC_STR, "") |
| |
| |
| /* Atomically add value and return the previous (unincremented) value. */ |
| |
| # define __arch_exchange_and_add_8_int(mem, newval, rel, acq) \ |
| (abort (), (typeof(*mem)) 0) |
| |
| # define __arch_exchange_and_add_16_int(mem, newval, rel, acq) \ |
| (abort (), (typeof(*mem)) 0) |
| |
| # define __arch_exchange_and_add_32_int(mem, value, rel, acq) \ |
| ({ typeof (*mem) __prev; int __cmp; \ |
| __asm__ __volatile__ ("\n" \ |
| ".set push\n\t" \ |
| MIPS_PUSH_MIPS2 \ |
| rel "\n" \ |
| "1:\t" \ |
| "ll %0,%4\n\t" \ |
| "addu %1,%0,%3\n\t" \ |
| "sc %1,%2\n\t" \ |
| R10K_BEQZ_INSN" %1,1b\n" \ |
| acq "\n\t" \ |
| ".set pop\n" \ |
| "2:\n\t" \ |
| : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem) \ |
| : "r" (value), "m" (*mem) \ |
| : "memory"); \ |
| __prev; }) |
| |
| # if _MIPS_SIM == _ABIO32 |
| /* We can't do an atomic 64-bit operation in O32. */ |
| # define __arch_exchange_and_add_64_int(mem, value, rel, acq) \ |
| (abort (), (typeof(*mem)) 0) |
| # else |
| # define __arch_exchange_and_add_64_int(mem, value, rel, acq) \ |
| ({ typeof (*mem) __prev; int __cmp; \ |
| __asm__ __volatile__ ( \ |
| ".set push\n\t" \ |
| MIPS_PUSH_MIPS2 \ |
| rel "\n" \ |
| "1:\t" \ |
| "lld %0,%4\n\t" \ |
| "daddu %1,%0,%3\n\t" \ |
| "scd %1,%2\n\t" \ |
| R10K_BEQZ_INSN" %1,1b\n" \ |
| acq "\n\t" \ |
| ".set pop\n" \ |
| "2:\n\t" \ |
| : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem) \ |
| : "r" (value), "m" (*mem) \ |
| : "memory"); \ |
| __prev; }) |
| # endif |
| |
| # define atomic_exchange_and_add_acq(mem, value) \ |
| __atomic_val_bysize (__arch_exchange_and_add, int, mem, value, \ |
| "", MIPS_SYNC_STR) |
| |
| # define atomic_exchange_and_add_rel(mem, value) \ |
| __atomic_val_bysize (__arch_exchange_and_add, int, mem, value, \ |
| MIPS_SYNC_STR, "") |
| |
| #endif /* !__mips16 && !__GNUC_PREREQ (4, 8) */ |
| |
| /* TODO: More atomic operations could be implemented efficiently; only the |
| basic requirements are done. */ |
| |
| #ifdef __mips16 |
| # define atomic_full_barrier() __sync_synchronize () |
| |
| #else /* !__mips16 */ |
| # define atomic_full_barrier() \ |
| __asm__ __volatile__ (".set push\n\t" \ |
| MIPS_PUSH_MIPS2 \ |
| MIPS_SYNC_STR "\n\t" \ |
| ".set pop" : : : "memory") |
| #endif /* !__mips16 */ |
| |
| #endif /* atomic-machine.h */ |