| # Makefile.in generated by automake 1.16.5 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994-2021 Free Software Foundation, Inc. |
| |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| #*************************************************************************** |
| # _ _ ____ _ |
| # Project ___| | | | _ \| | |
| # / __| | | | |_) | | |
| # | (__| |_| | _ <| |___ |
| # \___|\___/|_| \_\_____| |
| # |
| # Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al. |
| # |
| # This software is licensed as described in the file COPYING, which |
| # you should have received as part of this distribution. The terms |
| # are also available at https://curl.se/docs/copyright.html. |
| # |
| # You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| # copies of the Software, and permit persons to whom the Software is |
| # furnished to do so, under the terms of the COPYING file. |
| # |
| # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| # KIND, either express or implied. |
| # |
| # SPDX-License-Identifier: curl |
| # |
| ########################################################################### |
| |
| #*************************************************************************** |
| # _ _ ____ _ |
| # Project ___| | | | _ \| | |
| # / __| | | | |_) | | |
| # | (__| |_| | _ <| |___ |
| # \___|\___/|_| \_\_____| |
| # |
| # Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al. |
| # |
| # This software is licensed as described in the file COPYING, which |
| # you should have received as part of this distribution. The terms |
| # are also available at https://curl.se/docs/copyright.html. |
| # |
| # You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| # copies of the Software, and permit persons to whom the Software is |
| # furnished to do so, under the terms of the COPYING file. |
| # |
| # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| # KIND, either express or implied. |
| # |
| # SPDX-License-Identifier: curl |
| # |
| ########################################################################### |
| |
| #*************************************************************************** |
| # _ _ ____ _ |
| # Project ___| | | | _ \| | |
| # / __| | | | |_) | | |
| # | (__| |_| | _ <| |___ |
| # \___|\___/|_| \_\_____| |
| # |
| # Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al. |
| # |
| # This software is licensed as described in the file COPYING, which |
| # you should have received as part of this distribution. The terms |
| # are also available at https://curl.se/docs/copyright.html. |
| # |
| # You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| # copies of the Software, and permit persons to whom the Software is |
| # furnished to do so, under the terms of the COPYING file. |
| # |
| # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| # KIND, either express or implied. |
| # |
| # SPDX-License-Identifier: curl |
| # |
| ########################################################################### |
| # ./src/Makefile.inc |
| # Using the backslash as line continuation character might be problematic with |
| # some make flavours. If we ever want to change this in a portable manner then |
| # we should consider this idea : |
| # CSRC1 = file1.c file2.c file3.c |
| # CSRC2 = file4.c file5.c file6.c |
| # CSOURCES = $(CSRC1) $(CSRC2) |
| |
| |
| VPATH = @srcdir@ |
| am__is_gnu_make = { \ |
| if test -z '$(MAKELEVEL)'; then \ |
| false; \ |
| elif test -n '$(MAKE_HOST)'; then \ |
| true; \ |
| elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ |
| true; \ |
| else \ |
| false; \ |
| fi; \ |
| } |
| am__make_running_with_option = \ |
| case $${target_option-} in \ |
| ?) ;; \ |
| *) echo "am__make_running_with_option: internal error: invalid" \ |
| "target option '$${target_option-}' specified" >&2; \ |
| exit 1;; \ |
| esac; \ |
| has_opt=no; \ |
| sane_makeflags=$$MAKEFLAGS; \ |
| if $(am__is_gnu_make); then \ |
| sane_makeflags=$$MFLAGS; \ |
| else \ |
| case $$MAKEFLAGS in \ |
| *\\[\ \ ]*) \ |
| bs=\\; \ |
| sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ |
| | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ |
| esac; \ |
| fi; \ |
| skip_next=no; \ |
| strip_trailopt () \ |
| { \ |
| flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ |
| }; \ |
| for flg in $$sane_makeflags; do \ |
| test $$skip_next = yes && { skip_next=no; continue; }; \ |
| case $$flg in \ |
| *=*|--*) continue;; \ |
| -*I) strip_trailopt 'I'; skip_next=yes;; \ |
| -*I?*) strip_trailopt 'I';; \ |
| -*O) strip_trailopt 'O'; skip_next=yes;; \ |
| -*O?*) strip_trailopt 'O';; \ |
| -*l) strip_trailopt 'l'; skip_next=yes;; \ |
| -*l?*) strip_trailopt 'l';; \ |
| -[dEDm]) skip_next=yes;; \ |
| -[JT]) skip_next=yes;; \ |
| esac; \ |
| case $$flg in \ |
| *$$target_option*) has_opt=yes; break;; \ |
| esac; \ |
| done; \ |
| test $$has_opt = yes |
| am__make_dryrun = (target_option=n; $(am__make_running_with_option)) |
| am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| subdir = . |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/m4/curl-amissl.m4 \ |
| $(top_srcdir)/m4/curl-bearssl.m4 \ |
| $(top_srcdir)/m4/curl-compilers.m4 \ |
| $(top_srcdir)/m4/curl-confopts.m4 \ |
| $(top_srcdir)/m4/curl-functions.m4 \ |
| $(top_srcdir)/m4/curl-gnutls.m4 \ |
| $(top_srcdir)/m4/curl-mbedtls.m4 $(top_srcdir)/m4/curl-nss.m4 \ |
| $(top_srcdir)/m4/curl-openssl.m4 \ |
| $(top_srcdir)/m4/curl-override.m4 \ |
| $(top_srcdir)/m4/curl-reentrant.m4 \ |
| $(top_srcdir)/m4/curl-rustls.m4 \ |
| $(top_srcdir)/m4/curl-schannel.m4 \ |
| $(top_srcdir)/m4/curl-sectransp.m4 \ |
| $(top_srcdir)/m4/curl-sysconfig.m4 \ |
| $(top_srcdir)/m4/curl-wolfssl.m4 $(top_srcdir)/m4/libtool.m4 \ |
| $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ |
| $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ |
| $(top_srcdir)/m4/xc-am-iface.m4 \ |
| $(top_srcdir)/m4/xc-cc-check.m4 \ |
| $(top_srcdir)/m4/xc-lt-iface.m4 \ |
| $(top_srcdir)/m4/xc-translit.m4 \ |
| $(top_srcdir)/m4/xc-val-flgs.m4 \ |
| $(top_srcdir)/m4/zz40-xc-ovr.m4 \ |
| $(top_srcdir)/m4/zz50-xc-ovr.m4 \ |
| $(top_srcdir)/m4/zz60-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ |
| $(am__configure_deps) $(am__DIST_COMMON) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno config.status.lineno |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = $(top_builddir)/lib/curl_config.h |
| CONFIG_CLEAN_FILES = curl-config libcurl.pc |
| CONFIG_CLEAN_VPATH_FILES = |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| am__uninstall_files_from_dir = { \ |
| test -z "$$files" \ |
| || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
| || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
| $(am__cd) "$$dir" && rm -f $$files; }; \ |
| } |
| am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)" |
| SCRIPTS = $(bin_SCRIPTS) |
| AM_V_P = $(am__v_P_@AM_V@) |
| am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) |
| am__v_P_0 = false |
| am__v_P_1 = : |
| AM_V_GEN = $(am__v_GEN_@AM_V@) |
| am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) |
| am__v_GEN_0 = @echo " GEN " $@; |
| am__v_GEN_1 = |
| AM_V_at = $(am__v_at_@AM_V@) |
| am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) |
| am__v_at_0 = @ |
| am__v_at_1 = |
| SOURCES = |
| DIST_SOURCES = |
| RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ |
| ctags-recursive dvi-recursive html-recursive info-recursive \ |
| install-data-recursive install-dvi-recursive \ |
| install-exec-recursive install-html-recursive \ |
| install-info-recursive install-pdf-recursive \ |
| install-ps-recursive install-recursive installcheck-recursive \ |
| installdirs-recursive pdf-recursive ps-recursive \ |
| tags-recursive uninstall-recursive |
| am__can_run_installinfo = \ |
| case $$AM_UPDATE_INFO_DIR in \ |
| n|no|NO) false;; \ |
| *) (install-info --version) >/dev/null 2>&1;; \ |
| esac |
| DATA = $(pkgconfig_DATA) |
| RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| distclean-recursive maintainer-clean-recursive |
| am__recursive_targets = \ |
| $(RECURSIVE_TARGETS) \ |
| $(RECURSIVE_CLEAN_TARGETS) \ |
| $(am__extra_recursive_targets) |
| AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ |
| cscope distdir distdir-am dist dist-all distcheck |
| am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) |
| # Read a list of newline-separated strings from the standard input, |
| # and print each of them once, without duplicates. Input order is |
| # *not* preserved. |
| am__uniquify_input = $(AWK) '\ |
| BEGIN { nonempty = 0; } \ |
| { items[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in items) print i; }; } \ |
| ' |
| # Make sure the list of sources is unique. This is necessary because, |
| # e.g., the same source file might be shared among _SOURCES variables |
| # for different programs/libraries. |
| am__define_uniq_tagged_files = \ |
| list='$(am__tagged_files)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | $(am__uniquify_input)` |
| am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/curl-config.in \ |
| $(srcdir)/lib/Makefile.inc $(srcdir)/libcurl.pc.in \ |
| $(srcdir)/src/Makefile.inc COPYING README compile config.guess \ |
| config.sub depcomp install-sh ltmain.sh missing |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| distdir = $(PACKAGE)-$(VERSION) |
| top_distdir = $(distdir) |
| am__remove_distdir = \ |
| if test -d "$(distdir)"; then \ |
| find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| && rm -rf "$(distdir)" \ |
| || { sleep 5 && rm -rf "$(distdir)"; }; \ |
| else :; fi |
| am__post_remove_distdir = $(am__remove_distdir) |
| am__relativize = \ |
| dir0=`pwd`; \ |
| sed_first='s,^\([^/]*\)/.*$$,\1,'; \ |
| sed_rest='s,^[^/]*/*,,'; \ |
| sed_last='s,^.*/\([^/]*\)$$,\1,'; \ |
| sed_butlast='s,/*[^/]*$$,,'; \ |
| while test -n "$$dir1"; do \ |
| first=`echo "$$dir1" | sed -e "$$sed_first"`; \ |
| if test "$$first" != "."; then \ |
| if test "$$first" = ".."; then \ |
| dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ |
| dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ |
| else \ |
| first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ |
| if test "$$first2" = "$$first"; then \ |
| dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ |
| else \ |
| dir2="../$$dir2"; \ |
| fi; \ |
| dir0="$$dir0"/"$$first"; \ |
| fi; \ |
| fi; \ |
| dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ |
| done; \ |
| reldir="$$dir2" |
| DIST_ARCHIVES = $(distdir).tar.gz |
| GZIP_ENV = --best |
| DIST_TARGETS = dist-gzip |
| # Exists only to be overridden by the user if desired. |
| AM_DISTCHECK_DVI_TARGET = dvi |
| distuninstallcheck_listfiles = find . -type f -print |
| am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ |
| | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' |
| distcleancheck_listfiles = find . -type f -print |
| ACLOCAL = @ACLOCAL@ |
| AMTAR = @AMTAR@ |
| AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ |
| AR = @AR@ |
| AR_FLAGS = @AR_FLAGS@ |
| AS = @AS@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BLANK_AT_MAKETIME = @BLANK_AT_MAKETIME@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@ |
| CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CPPFLAG_CURL_STATICLIB = @CPPFLAG_CURL_STATICLIB@ |
| CSCOPE = @CSCOPE@ |
| CTAGS = @CTAGS@ |
| CURLVERSION = @CURLVERSION@ |
| CURL_CA_BUNDLE = @CURL_CA_BUNDLE@ |
| CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@ |
| CURL_DISABLE_DICT = @CURL_DISABLE_DICT@ |
| CURL_DISABLE_FILE = @CURL_DISABLE_FILE@ |
| CURL_DISABLE_FTP = @CURL_DISABLE_FTP@ |
| CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@ |
| CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@ |
| CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@ |
| CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@ |
| CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@ |
| CURL_DISABLE_MQTT = @CURL_DISABLE_MQTT@ |
| CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@ |
| CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@ |
| CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@ |
| CURL_DISABLE_SMB = @CURL_DISABLE_SMB@ |
| CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@ |
| CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@ |
| CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@ |
| CURL_LT_SHLIB_VERSIONED_FLAVOUR = @CURL_LT_SHLIB_VERSIONED_FLAVOUR@ |
| CURL_NETWORK_AND_TIME_LIBS = @CURL_NETWORK_AND_TIME_LIBS@ |
| CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@ |
| CURL_PLIST_VERSION = @CURL_PLIST_VERSION@ |
| CURL_WITH_MULTI_SSL = @CURL_WITH_MULTI_SSL@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFAULT_SSL_BACKEND = @DEFAULT_SSL_BACKEND@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DLLTOOL = @DLLTOOL@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| ENABLE_SHARED = @ENABLE_SHARED@ |
| ENABLE_STATIC = @ENABLE_STATIC@ |
| ETAGS = @ETAGS@ |
| EXEEXT = @EXEEXT@ |
| FGREP = @FGREP@ |
| FILECMD = @FILECMD@ |
| FISH_FUNCTIONS_DIR = @FISH_FUNCTIONS_DIR@ |
| GCOV = @GCOV@ |
| GREP = @GREP@ |
| HAVE_BROTLI = @HAVE_BROTLI@ |
| HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@ |
| HAVE_LDAP_SSL = @HAVE_LDAP_SSL@ |
| HAVE_LIBZ = @HAVE_LIBZ@ |
| HAVE_OPENSSL_SRP = @HAVE_OPENSSL_SRP@ |
| HAVE_PROTO_BSDSOCKET_H = @HAVE_PROTO_BSDSOCKET_H@ |
| HAVE_ZSTD = @HAVE_ZSTD@ |
| IDN_ENABLED = @IDN_ENABLED@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| IPV6_ENABLED = @IPV6_ENABLED@ |
| LCOV = @LCOV@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBCURL_LIBS = @LIBCURL_LIBS@ |
| LIBCURL_NO_SHARED = @LIBCURL_NO_SHARED@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MANIFEST_TOOL = @MANIFEST_TOOL@ |
| MANOPT = @MANOPT@ |
| MKDIR_P = @MKDIR_P@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| NROFF = @NROFF@ |
| NSS_LIBS = @NSS_LIBS@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PERL = @PERL@ |
| PKGADD_NAME = @PKGADD_NAME@ |
| PKGADD_PKG = @PKGADD_PKG@ |
| PKGADD_VENDOR = @PKGADD_VENDOR@ |
| PKGCONFIG = @PKGCONFIG@ |
| RANDOM_FILE = @RANDOM_FILE@ |
| RANLIB = @RANLIB@ |
| RC = @RC@ |
| REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| SSL_BACKENDS = @SSL_BACKENDS@ |
| SSL_ENABLED = @SSL_ENABLED@ |
| SSL_LIBS = @SSL_LIBS@ |
| STRIP = @STRIP@ |
| SUPPORT_FEATURES = @SUPPORT_FEATURES@ |
| SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@ |
| USE_ARES = @USE_ARES@ |
| USE_BEARSSL = @USE_BEARSSL@ |
| USE_GNUTLS = @USE_GNUTLS@ |
| USE_HYPER = @USE_HYPER@ |
| USE_LIBRTMP = @USE_LIBRTMP@ |
| USE_LIBSSH = @USE_LIBSSH@ |
| USE_LIBSSH2 = @USE_LIBSSH2@ |
| USE_MBEDTLS = @USE_MBEDTLS@ |
| USE_MSH3 = @USE_MSH3@ |
| USE_NGHTTP2 = @USE_NGHTTP2@ |
| USE_NGHTTP3 = @USE_NGHTTP3@ |
| USE_NGTCP2 = @USE_NGTCP2@ |
| USE_NGTCP2_CRYPTO_GNUTLS = @USE_NGTCP2_CRYPTO_GNUTLS@ |
| USE_NGTCP2_CRYPTO_OPENSSL = @USE_NGTCP2_CRYPTO_OPENSSL@ |
| USE_NGTCP2_CRYPTO_WOLFSSL = @USE_NGTCP2_CRYPTO_WOLFSSL@ |
| USE_NSS = @USE_NSS@ |
| USE_OPENLDAP = @USE_OPENLDAP@ |
| USE_QUICHE = @USE_QUICHE@ |
| USE_RUSTLS = @USE_RUSTLS@ |
| USE_SCHANNEL = @USE_SCHANNEL@ |
| USE_SECTRANSP = @USE_SECTRANSP@ |
| USE_UNIX_SOCKETS = @USE_UNIX_SOCKETS@ |
| USE_WIN32_CRYPTO = @USE_WIN32_CRYPTO@ |
| USE_WIN32_LARGE_FILES = @USE_WIN32_LARGE_FILES@ |
| USE_WIN32_SMALL_FILES = @USE_WIN32_SMALL_FILES@ |
| USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@ |
| USE_WOLFSSH = @USE_WOLFSSH@ |
| USE_WOLFSSL = @USE_WOLFSSL@ |
| VERSION = @VERSION@ |
| VERSIONNUM = @VERSIONNUM@ |
| ZLIB_LIBS = @ZLIB_LIBS@ |
| ZSH_FUNCTIONS_DIR = @ZSH_FUNCTIONS_DIR@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| libext = @libext@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| runstatedir = @runstatedir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target_alias = @target_alias@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| AUTOMAKE_OPTIONS = foreign |
| ACLOCAL_AMFLAGS = -I m4 |
| CMAKE_DIST = \ |
| CMake/cmake_uninstall.cmake.in \ |
| CMake/CMakeConfigurableFile.in \ |
| CMake/curl-config.cmake.in \ |
| CMake/CurlSymbolHiding.cmake \ |
| CMake/CurlTests.c \ |
| CMake/FindBearSSL.cmake \ |
| CMake/FindBrotli.cmake \ |
| CMake/FindCARES.cmake \ |
| CMake/FindGSS.cmake \ |
| CMake/FindLibPSL.cmake \ |
| CMake/FindLibSSH2.cmake \ |
| CMake/FindMbedTLS.cmake \ |
| CMake/FindMSH3.cmake \ |
| CMake/FindNGHTTP2.cmake \ |
| CMake/FindNGHTTP3.cmake \ |
| CMake/FindNGTCP2.cmake \ |
| CMake/FindNSS.cmake \ |
| CMake/FindQUICHE.cmake \ |
| CMake/FindWolfSSL.cmake \ |
| CMake/FindZstd.cmake \ |
| CMake/Macros.cmake \ |
| CMake/OtherTests.cmake \ |
| CMake/Platforms/WindowsCache.cmake \ |
| CMake/Utilities.cmake \ |
| CMakeLists.txt |
| |
| VC10_LIBTMPL = projects/Windows/VC10/lib/libcurl.tmpl |
| VC10_LIBVCXPROJ = projects/Windows/VC10/lib/libcurl.vcxproj.dist |
| VC10_LIBVCXPROJ_DEPS = $(VC10_LIBTMPL) Makefile.am lib/Makefile.inc |
| VC10_SRCTMPL = projects/Windows/VC10/src/curl.tmpl |
| VC10_SRCVCXPROJ = projects/Windows/VC10/src/curl.vcxproj.dist |
| VC10_SRCVCXPROJ_DEPS = $(VC10_SRCTMPL) Makefile.am src/Makefile.inc |
| VC11_LIBTMPL = projects/Windows/VC11/lib/libcurl.tmpl |
| VC11_LIBVCXPROJ = projects/Windows/VC11/lib/libcurl.vcxproj.dist |
| VC11_LIBVCXPROJ_DEPS = $(VC11_LIBTMPL) Makefile.am lib/Makefile.inc |
| VC11_SRCTMPL = projects/Windows/VC11/src/curl.tmpl |
| VC11_SRCVCXPROJ = projects/Windows/VC11/src/curl.vcxproj.dist |
| VC11_SRCVCXPROJ_DEPS = $(VC11_SRCTMPL) Makefile.am src/Makefile.inc |
| VC12_LIBTMPL = projects/Windows/VC12/lib/libcurl.tmpl |
| VC12_LIBVCXPROJ = projects/Windows/VC12/lib/libcurl.vcxproj.dist |
| VC12_LIBVCXPROJ_DEPS = $(VC12_LIBTMPL) Makefile.am lib/Makefile.inc |
| VC12_SRCTMPL = projects/Windows/VC12/src/curl.tmpl |
| VC12_SRCVCXPROJ = projects/Windows/VC12/src/curl.vcxproj.dist |
| VC12_SRCVCXPROJ_DEPS = $(VC12_SRCTMPL) Makefile.am src/Makefile.inc |
| VC14_LIBTMPL = projects/Windows/VC14/lib/libcurl.tmpl |
| VC14_LIBVCXPROJ = projects/Windows/VC14/lib/libcurl.vcxproj.dist |
| VC14_LIBVCXPROJ_DEPS = $(VC14_LIBTMPL) Makefile.am lib/Makefile.inc |
| VC14_SRCTMPL = projects/Windows/VC14/src/curl.tmpl |
| VC14_SRCVCXPROJ = projects/Windows/VC14/src/curl.vcxproj.dist |
| VC14_SRCVCXPROJ_DEPS = $(VC14_SRCTMPL) Makefile.am src/Makefile.inc |
| VC14_10_LIBTMPL = projects/Windows/VC14.10/lib/libcurl.tmpl |
| VC14_10_LIBVCXPROJ = projects/Windows/VC14.10/lib/libcurl.vcxproj.dist |
| VC14_10_LIBVCXPROJ_DEPS = $(VC14_10_LIBTMPL) Makefile.am lib/Makefile.inc |
| VC14_10_SRCTMPL = projects/Windows/VC14.10/src/curl.tmpl |
| VC14_10_SRCVCXPROJ = projects/Windows/VC14.10/src/curl.vcxproj.dist |
| VC14_10_SRCVCXPROJ_DEPS = $(VC14_10_SRCTMPL) Makefile.am src/Makefile.inc |
| VC14_30_LIBTMPL = projects/Windows/VC14.30/lib/libcurl.tmpl |
| VC14_30_LIBVCXPROJ = projects/Windows/VC14.30/lib/libcurl.vcxproj.dist |
| VC14_30_LIBVCXPROJ_DEPS = $(VC14_30_LIBTMPL) Makefile.am lib/Makefile.inc |
| VC14_30_SRCTMPL = projects/Windows/VC14.30/src/curl.tmpl |
| VC14_30_SRCVCXPROJ = projects/Windows/VC14.30/src/curl.vcxproj.dist |
| VC14_30_SRCVCXPROJ_DEPS = $(VC14_30_SRCTMPL) Makefile.am src/Makefile.inc |
| VC_DIST = projects/README.md \ |
| projects/build-openssl.bat \ |
| projects/build-wolfssl.bat \ |
| projects/checksrc.bat \ |
| projects/Windows/VC10/curl-all.sln \ |
| projects/Windows/VC10/lib/libcurl.sln \ |
| projects/Windows/VC10/lib/libcurl.vcxproj.filters \ |
| projects/Windows/VC10/src/curl.sln \ |
| projects/Windows/VC10/src/curl.vcxproj.filters \ |
| projects/Windows/VC11/curl-all.sln \ |
| projects/Windows/VC11/lib/libcurl.sln \ |
| projects/Windows/VC11/lib/libcurl.vcxproj.filters \ |
| projects/Windows/VC11/src/curl.sln \ |
| projects/Windows/VC11/src/curl.vcxproj.filters \ |
| projects/Windows/VC12/curl-all.sln \ |
| projects/Windows/VC12/lib/libcurl.sln \ |
| projects/Windows/VC12/lib/libcurl.vcxproj.filters \ |
| projects/Windows/VC12/src/curl.sln \ |
| projects/Windows/VC12/src/curl.vcxproj.filters \ |
| projects/Windows/VC14/curl-all.sln \ |
| projects/Windows/VC14/lib/libcurl.sln \ |
| projects/Windows/VC14/lib/libcurl.vcxproj.filters \ |
| projects/Windows/VC14/src/curl.sln \ |
| projects/Windows/VC14/src/curl.vcxproj.filters \ |
| projects/Windows/VC14.10/curl-all.sln \ |
| projects/Windows/VC14.10/lib/libcurl.sln \ |
| projects/Windows/VC14.10/lib/libcurl.vcxproj.filters \ |
| projects/Windows/VC14.10/src/curl.sln \ |
| projects/Windows/VC14.10/src/curl.vcxproj.filters \ |
| projects/Windows/VC14.30/curl-all.sln \ |
| projects/Windows/VC14.30/lib/libcurl.sln \ |
| projects/Windows/VC14.30/lib/libcurl.vcxproj.filters \ |
| projects/Windows/VC14.30/src/curl.sln \ |
| projects/Windows/VC14.30/src/curl.vcxproj.filters \ |
| projects/generate.bat \ |
| projects/wolfssl_options.h \ |
| projects/wolfssl_override.props |
| |
| WINBUILD_DIST = winbuild/README.md winbuild/gen_resp_file.bat \ |
| winbuild/MakefileBuild.vc winbuild/Makefile.vc |
| |
| PLAN9_DIST = plan9/include/mkfile \ |
| plan9/include/mkfile \ |
| plan9/mkfile.proto \ |
| plan9/mkfile \ |
| plan9/README \ |
| plan9/lib/mkfile.inc \ |
| plan9/lib/mkfile \ |
| plan9/src/mkfile.inc \ |
| plan9/src/mkfile |
| |
| EXTRA_DIST = CHANGES COPYING maketgz Makefile.dist curl-config.in \ |
| RELEASE-NOTES buildconf libcurl.pc.in MacOSX-Framework $(CMAKE_DIST) \ |
| $(VC_DIST) $(WINBUILD_DIST) $(PLAN9_DIST) lib/libcurl.vers.in buildconf.bat |
| |
| CLEANFILES = $(VC10_LIBVCXPROJ) $(VC10_SRCVCXPROJ) $(VC11_LIBVCXPROJ) \ |
| $(VC11_SRCVCXPROJ) $(VC12_LIBVCXPROJ) $(VC12_SRCVCXPROJ) $(VC14_LIBVCXPROJ) \ |
| $(VC14_SRCVCXPROJ) $(VC14_10_LIBVCXPROJ) $(VC14_10_SRCVCXPROJ) \ |
| $(VC14_30_LIBVCXPROJ) $(VC14_30_SRCVCXPROJ) |
| |
| bin_SCRIPTS = curl-config |
| SUBDIRS = lib src |
| DIST_SUBDIRS = $(SUBDIRS) tests packages scripts include docs |
| pkgconfigdir = $(libdir)/pkgconfig |
| pkgconfig_DATA = libcurl.pc |
| LIB_VAUTH_CFILES = \ |
| vauth/cleartext.c \ |
| vauth/cram.c \ |
| vauth/digest.c \ |
| vauth/digest_sspi.c \ |
| vauth/gsasl.c \ |
| vauth/krb5_gssapi.c \ |
| vauth/krb5_sspi.c \ |
| vauth/ntlm.c \ |
| vauth/ntlm_sspi.c \ |
| vauth/oauth2.c \ |
| vauth/spnego_gssapi.c \ |
| vauth/spnego_sspi.c \ |
| vauth/vauth.c |
| |
| LIB_VAUTH_HFILES = \ |
| vauth/digest.h \ |
| vauth/ntlm.h \ |
| vauth/vauth.h |
| |
| LIB_VTLS_CFILES = \ |
| vtls/bearssl.c \ |
| vtls/gskit.c \ |
| vtls/gtls.c \ |
| vtls/hostcheck.c \ |
| vtls/keylog.c \ |
| vtls/mbedtls.c \ |
| vtls/mbedtls_threadlock.c \ |
| vtls/nss.c \ |
| vtls/openssl.c \ |
| vtls/rustls.c \ |
| vtls/schannel.c \ |
| vtls/schannel_verify.c \ |
| vtls/sectransp.c \ |
| vtls/vtls.c \ |
| vtls/wolfssl.c \ |
| vtls/x509asn1.c |
| |
| LIB_VTLS_HFILES = \ |
| vtls/bearssl.h \ |
| vtls/gskit.h \ |
| vtls/gtls.h \ |
| vtls/hostcheck.h \ |
| vtls/keylog.h \ |
| vtls/mbedtls.h \ |
| vtls/mbedtls_threadlock.h \ |
| vtls/nssg.h \ |
| vtls/openssl.h \ |
| vtls/rustls.h \ |
| vtls/schannel.h \ |
| vtls/sectransp.h \ |
| vtls/vtls.h \ |
| vtls/wolfssl.h \ |
| vtls/x509asn1.h |
| |
| LIB_VQUIC_CFILES = \ |
| vquic/msh3.c \ |
| vquic/ngtcp2.c \ |
| vquic/quiche.c \ |
| vquic/vquic.c |
| |
| LIB_VQUIC_HFILES = \ |
| vquic/msh3.h \ |
| vquic/ngtcp2.h \ |
| vquic/quiche.h \ |
| vquic/vquic.h |
| |
| LIB_VSSH_CFILES = \ |
| vssh/libssh.c \ |
| vssh/libssh2.c \ |
| vssh/wolfssh.c |
| |
| LIB_VSSH_HFILES = \ |
| vssh/ssh.h |
| |
| LIB_CFILES = \ |
| altsvc.c \ |
| amigaos.c \ |
| asyn-ares.c \ |
| asyn-thread.c \ |
| base64.c \ |
| bufref.c \ |
| c-hyper.c \ |
| conncache.c \ |
| connect.c \ |
| content_encoding.c \ |
| cookie.c \ |
| curl_addrinfo.c \ |
| curl_des.c \ |
| curl_endian.c \ |
| curl_fnmatch.c \ |
| curl_get_line.c \ |
| curl_gethostname.c \ |
| curl_gssapi.c \ |
| curl_memrchr.c \ |
| curl_multibyte.c \ |
| curl_ntlm_core.c \ |
| curl_ntlm_wb.c \ |
| curl_path.c \ |
| curl_range.c \ |
| curl_rtmp.c \ |
| curl_sasl.c \ |
| curl_sspi.c \ |
| curl_threads.c \ |
| dict.c \ |
| doh.c \ |
| dynbuf.c \ |
| easy.c \ |
| easygetopt.c \ |
| easyoptions.c \ |
| escape.c \ |
| file.c \ |
| fileinfo.c \ |
| fopen.c \ |
| formdata.c \ |
| ftp.c \ |
| ftplistparser.c \ |
| getenv.c \ |
| getinfo.c \ |
| gopher.c \ |
| h2h3.c \ |
| hash.c \ |
| headers.c \ |
| hmac.c \ |
| hostasyn.c \ |
| hostip.c \ |
| hostip4.c \ |
| hostip6.c \ |
| hostsyn.c \ |
| hsts.c \ |
| http.c \ |
| http2.c \ |
| http_chunks.c \ |
| http_digest.c \ |
| http_negotiate.c \ |
| http_ntlm.c \ |
| http_proxy.c \ |
| http_aws_sigv4.c \ |
| idn_win32.c \ |
| if2ip.c \ |
| imap.c \ |
| inet_ntop.c \ |
| inet_pton.c \ |
| krb5.c \ |
| ldap.c \ |
| llist.c \ |
| md4.c \ |
| md5.c \ |
| memdebug.c \ |
| mime.c \ |
| mprintf.c \ |
| mqtt.c \ |
| multi.c \ |
| netrc.c \ |
| nonblock.c \ |
| noproxy.c \ |
| openldap.c \ |
| parsedate.c \ |
| pingpong.c \ |
| pop3.c \ |
| progress.c \ |
| psl.c \ |
| rand.c \ |
| rename.c \ |
| rtsp.c \ |
| select.c \ |
| sendf.c \ |
| setopt.c \ |
| sha256.c \ |
| share.c \ |
| slist.c \ |
| smb.c \ |
| smtp.c \ |
| socketpair.c \ |
| socks.c \ |
| socks_gssapi.c \ |
| socks_sspi.c \ |
| speedcheck.c \ |
| splay.c \ |
| strcase.c \ |
| strdup.c \ |
| strerror.c \ |
| strtok.c \ |
| strtoofft.c \ |
| system_win32.c \ |
| telnet.c \ |
| tftp.c \ |
| timediff.c \ |
| timeval.c \ |
| transfer.c \ |
| url.c \ |
| urlapi.c \ |
| version.c \ |
| version_win32.c \ |
| warnless.c \ |
| wildcard.c \ |
| ws.c |
| |
| LIB_HFILES = \ |
| altsvc.h \ |
| amigaos.h \ |
| arpa_telnet.h \ |
| asyn.h \ |
| bufref.h \ |
| c-hyper.h \ |
| conncache.h \ |
| connect.h \ |
| content_encoding.h \ |
| cookie.h \ |
| curl_addrinfo.h \ |
| curl_base64.h \ |
| curl_ctype.h \ |
| curl_des.h \ |
| curl_endian.h \ |
| curl_fnmatch.h \ |
| curl_get_line.h \ |
| curl_gethostname.h \ |
| curl_gssapi.h \ |
| curl_hmac.h \ |
| curl_krb5.h \ |
| curl_ldap.h \ |
| curl_md4.h \ |
| curl_md5.h \ |
| curl_memory.h \ |
| curl_memrchr.h \ |
| curl_multibyte.h \ |
| curl_ntlm_core.h \ |
| curl_ntlm_wb.h \ |
| curl_path.h \ |
| curl_printf.h \ |
| curl_range.h \ |
| curl_rtmp.h \ |
| curl_sasl.h \ |
| curl_setup.h \ |
| curl_setup_once.h \ |
| curl_sha256.h \ |
| curl_sspi.h \ |
| curl_threads.h \ |
| curlx.h \ |
| dict.h \ |
| doh.h \ |
| dynbuf.h \ |
| easy_lock.h \ |
| easyif.h \ |
| easyoptions.h \ |
| escape.h \ |
| file.h \ |
| fileinfo.h \ |
| fopen.h \ |
| formdata.h \ |
| functypes.h \ |
| ftp.h \ |
| ftplistparser.h \ |
| getinfo.h \ |
| gopher.h \ |
| h2h3.h \ |
| hash.h \ |
| headers.h \ |
| hostip.h \ |
| hsts.h \ |
| http.h \ |
| http2.h \ |
| http_chunks.h \ |
| http_digest.h \ |
| http_negotiate.h \ |
| http_ntlm.h \ |
| http_proxy.h \ |
| http_aws_sigv4.h \ |
| if2ip.h \ |
| imap.h \ |
| inet_ntop.h \ |
| inet_pton.h \ |
| llist.h \ |
| memdebug.h \ |
| mime.h \ |
| mqtt.h \ |
| multihandle.h \ |
| multiif.h \ |
| netrc.h \ |
| nonblock.h \ |
| noproxy.h \ |
| parsedate.h \ |
| pingpong.h \ |
| pop3.h \ |
| progress.h \ |
| psl.h \ |
| quic.h \ |
| rand.h \ |
| rename.h \ |
| rtsp.h \ |
| select.h \ |
| sendf.h \ |
| setopt.h \ |
| setup-vms.h \ |
| share.h \ |
| sigpipe.h \ |
| slist.h \ |
| smb.h \ |
| smtp.h \ |
| sockaddr.h \ |
| socketpair.h \ |
| socks.h \ |
| speedcheck.h \ |
| splay.h \ |
| strcase.h \ |
| strdup.h \ |
| strerror.h \ |
| strtok.h \ |
| strtoofft.h \ |
| system_win32.h \ |
| telnet.h \ |
| tftp.h \ |
| timediff.h \ |
| timeval.h \ |
| transfer.h \ |
| url.h \ |
| urlapi-int.h \ |
| urldata.h \ |
| version_win32.h \ |
| warnless.h \ |
| wildcard.h \ |
| ws.h |
| |
| LIB_RCFILES = libcurl.rc |
| CSOURCES = $(LIB_CFILES) $(LIB_VAUTH_CFILES) $(LIB_VTLS_CFILES) \ |
| $(LIB_VQUIC_CFILES) $(LIB_VSSH_CFILES) |
| |
| HHEADERS = $(LIB_HFILES) $(LIB_VAUTH_HFILES) $(LIB_VTLS_HFILES) \ |
| $(LIB_VQUIC_HFILES) $(LIB_VSSH_HFILES) |
| |
| |
| # libcurl has sources that provide functions named curlx_* that aren't part of |
| # the official API, but we re-use the code here to avoid duplication. |
| CURLX_CFILES = \ |
| ../lib/strtoofft.c \ |
| ../lib/timediff.c \ |
| ../lib/nonblock.c \ |
| ../lib/warnless.c \ |
| ../lib/curl_multibyte.c \ |
| ../lib/version_win32.c \ |
| ../lib/dynbuf.c |
| |
| CURLX_HFILES = \ |
| ../lib/curl_setup.h \ |
| ../lib/strtoofft.h \ |
| ../lib/timediff.h \ |
| ../lib/nonblock.h \ |
| ../lib/warnless.h \ |
| ../lib/curl_ctype.h \ |
| ../lib/curl_multibyte.h \ |
| ../lib/version_win32.h \ |
| ../lib/dynbuf.h |
| |
| CURL_CFILES = \ |
| slist_wc.c \ |
| tool_binmode.c \ |
| tool_bname.c \ |
| tool_cb_dbg.c \ |
| tool_cb_hdr.c \ |
| tool_cb_prg.c \ |
| tool_cb_rea.c \ |
| tool_cb_see.c \ |
| tool_cb_wrt.c \ |
| tool_cfgable.c \ |
| tool_dirhie.c \ |
| tool_doswin.c \ |
| tool_easysrc.c \ |
| tool_filetime.c \ |
| tool_findfile.c \ |
| tool_formparse.c \ |
| tool_getparam.c \ |
| tool_getpass.c \ |
| tool_help.c \ |
| tool_helpers.c \ |
| tool_hugehelp.c \ |
| tool_libinfo.c \ |
| tool_listhelp.c \ |
| tool_main.c \ |
| tool_msgs.c \ |
| tool_operate.c \ |
| tool_operhlp.c \ |
| tool_panykey.c \ |
| tool_paramhlp.c \ |
| tool_parsecfg.c \ |
| tool_progress.c \ |
| tool_strdup.c \ |
| tool_setopt.c \ |
| tool_sleep.c \ |
| tool_urlglob.c \ |
| tool_util.c \ |
| tool_vms.c \ |
| tool_writeout.c \ |
| tool_writeout_json.c \ |
| tool_xattr.c |
| |
| CURL_HFILES = \ |
| slist_wc.h \ |
| tool_binmode.h \ |
| tool_bname.h \ |
| tool_cb_dbg.h \ |
| tool_cb_hdr.h \ |
| tool_cb_prg.h \ |
| tool_cb_rea.h \ |
| tool_cb_see.h \ |
| tool_cb_wrt.h \ |
| tool_cfgable.h \ |
| tool_dirhie.h \ |
| tool_doswin.h \ |
| tool_easysrc.h \ |
| tool_filetime.h \ |
| tool_findfile.h \ |
| tool_formparse.h \ |
| tool_getparam.h \ |
| tool_getpass.h \ |
| tool_help.h \ |
| tool_helpers.h \ |
| tool_hugehelp.h \ |
| tool_libinfo.h \ |
| tool_main.h \ |
| tool_msgs.h \ |
| tool_operate.h \ |
| tool_operhlp.h \ |
| tool_panykey.h \ |
| tool_paramhlp.h \ |
| tool_parsecfg.h \ |
| tool_progress.h \ |
| tool_sdecls.h \ |
| tool_setopt.h \ |
| tool_setup.h \ |
| tool_sleep.h \ |
| tool_strdup.h \ |
| tool_urlglob.h \ |
| tool_util.h \ |
| tool_version.h \ |
| tool_vms.h \ |
| tool_writeout.h \ |
| tool_writeout_json.h \ |
| tool_xattr.h |
| |
| CURL_RCFILES = curl.rc |
| |
| # curl_SOURCES is special and gets assigned in src/Makefile.am |
| CURL_FILES = $(CURL_CFILES) $(CURLX_CFILES) $(CURL_HFILES) |
| all: all-recursive |
| |
| .SUFFIXES: |
| am--refresh: Makefile |
| @: |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ |
| $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ |
| esac; |
| $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__empty): |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| $(am__cd) $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| $(am__aclocal_m4_deps): |
| curl-config: $(top_builddir)/config.status $(srcdir)/curl-config.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| libcurl.pc: $(top_builddir)/config.status $(srcdir)/libcurl.pc.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| install-binSCRIPTS: $(bin_SCRIPTS) |
| @$(NORMAL_INSTALL) |
| @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ |
| done | \ |
| sed -e 'p;s,.*/,,;n' \ |
| -e 'h;s|.*|.|' \ |
| -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ |
| $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ |
| { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ |
| if ($$2 == $$4) { files[d] = files[d] " " $$1; \ |
| if (++n[d] == $(am__install_max)) { \ |
| print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ |
| else { print "f", d "/" $$4, $$1 } } \ |
| END { for (d in files) print "f", d, files[d] }' | \ |
| while read type dir files; do \ |
| if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ |
| test -z "$$files" || { \ |
| echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ |
| $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ |
| } \ |
| ; done |
| |
| uninstall-binSCRIPTS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ |
| files=`for p in $$list; do echo "$$p"; done | \ |
| sed -e 's,.*/,,;$(transform)'`; \ |
| dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir) |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool config.lt |
| install-pkgconfigDATA: $(pkgconfig_DATA) |
| @$(NORMAL_INSTALL) |
| @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ |
| done |
| |
| uninstall-pkgconfigDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run 'make' without going through this Makefile. |
| # To change the values of 'make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in 'config.status', edit 'config.status' |
| # (which will cause the Makefiles to be regenerated when you run 'make'); |
| # (2) otherwise, pass the desired values on the 'make' command line. |
| $(am__recursive_targets): |
| @fail=; \ |
| if $(am__make_keepgoing); then \ |
| failcom='fail=yes'; \ |
| else \ |
| failcom='exit 1'; \ |
| fi; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| ID: $(am__tagged_files) |
| $(am__define_uniq_tagged_files); mkid -fID $$unique |
| tags: tags-recursive |
| TAGS: tags |
| |
| tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| set x; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| $(am__define_uniq_tagged_files); \ |
| shift; \ |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| if test $$# -gt 0; then \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| "$$@" $$unique; \ |
| else \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$unique; \ |
| fi; \ |
| fi |
| ctags: ctags-recursive |
| |
| CTAGS: ctags |
| ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| $(am__define_uniq_tagged_files); \ |
| test -z "$(CTAGS_ARGS)$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && $(am__cd) $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) "$$here" |
| cscope: cscope.files |
| test ! -s cscope.files \ |
| || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) |
| clean-cscope: |
| -rm -f cscope.files |
| cscope.files: clean-cscope cscopelist |
| cscopelist: cscopelist-recursive |
| |
| cscopelist-am: $(am__tagged_files) |
| list='$(am__tagged_files)'; \ |
| case "$(srcdir)" in \ |
| [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ |
| *) sdir=$(subdir)/$(srcdir) ;; \ |
| esac; \ |
| for i in $$list; do \ |
| if test -f "$$i"; then \ |
| echo "$(subdir)/$$i"; \ |
| else \ |
| echo "$$sdir/$$i"; \ |
| fi; \ |
| done >> $(top_builddir)/cscope.files |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| -rm -f cscope.out cscope.in.out cscope.po.out cscope.files |
| distdir: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) distdir-am |
| |
| distdir-am: $(DISTFILES) |
| $(am__remove_distdir) |
| test -d "$(distdir)" || mkdir "$(distdir)" |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| $(am__make_dryrun) \ |
| || test -d "$(distdir)/$$subdir" \ |
| || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ |
| $(am__relativize); \ |
| new_distdir=$$reldir; \ |
| dir1=$$subdir; dir2="$(top_distdir)"; \ |
| $(am__relativize); \ |
| new_top_distdir=$$reldir; \ |
| echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ |
| echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ |
| ($(am__cd) $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$new_top_distdir" \ |
| distdir="$$new_distdir" \ |
| am__remove_distdir=: \ |
| am__skip_length_check=: \ |
| am__skip_mode_fix=: \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
| dist-hook |
| -test -n "$(am__skip_mode_fix)" \ |
| || find "$(distdir)" -type d ! -perm -755 \ |
| -exec chmod u+rwx,go+rx {} \; -o \ |
| ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ |
| || chmod -R a+r "$(distdir)" |
| dist-gzip: distdir |
| tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz |
| $(am__post_remove_distdir) |
| |
| dist-bzip2: distdir |
| tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 |
| $(am__post_remove_distdir) |
| |
| dist-lzip: distdir |
| tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz |
| $(am__post_remove_distdir) |
| |
| dist-xz: distdir |
| tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz |
| $(am__post_remove_distdir) |
| |
| dist-zstd: distdir |
| tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst |
| $(am__post_remove_distdir) |
| |
| dist-tarZ: distdir |
| @echo WARNING: "Support for distribution archives compressed with" \ |
| "legacy program 'compress' is deprecated." >&2 |
| @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z |
| $(am__post_remove_distdir) |
| |
| dist-shar: distdir |
| @echo WARNING: "Support for shar distribution archives is" \ |
| "deprecated." >&2 |
| @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz |
| $(am__post_remove_distdir) |
| |
| dist-zip: distdir |
| -rm -f $(distdir).zip |
| zip -rq $(distdir).zip $(distdir) |
| $(am__post_remove_distdir) |
| |
| dist dist-all: |
| $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' |
| $(am__post_remove_distdir) |
| |
| # This target untars the dist file and tries a VPATH configuration. Then |
| # it guarantees that the distribution is self-contained by making another |
| # tarfile. |
| distcheck: dist |
| case '$(DIST_ARCHIVES)' in \ |
| *.tar.gz*) \ |
| eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ |
| *.tar.bz2*) \ |
| bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ |
| *.tar.lz*) \ |
| lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ |
| *.tar.xz*) \ |
| xz -dc $(distdir).tar.xz | $(am__untar) ;;\ |
| *.tar.Z*) \ |
| uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ |
| *.shar.gz*) \ |
| eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ |
| *.zip*) \ |
| unzip $(distdir).zip ;;\ |
| *.tar.zst*) \ |
| zstd -dc $(distdir).tar.zst | $(am__untar) ;;\ |
| esac |
| chmod -R a-w $(distdir) |
| chmod u+w $(distdir) |
| mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst |
| chmod a-w $(distdir) |
| test -d $(distdir)/_build || exit 0; \ |
| dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
| && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| && am__cwd=`pwd` \ |
| && $(am__cd) $(distdir)/_build/sub \ |
| && ../../configure \ |
| $(AM_DISTCHECK_CONFIGURE_FLAGS) \ |
| $(DISTCHECK_CONFIGURE_FLAGS) \ |
| --srcdir=../.. --prefix="$$dc_install_base" \ |
| && $(MAKE) $(AM_MAKEFLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \ |
| && $(MAKE) $(AM_MAKEFLAGS) check \ |
| && $(MAKE) $(AM_MAKEFLAGS) install \ |
| && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
| distuninstallcheck \ |
| && chmod -R a-w "$$dc_install_base" \ |
| && ({ \ |
| (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| && rm -rf "$$dc_destdir" \ |
| && $(MAKE) $(AM_MAKEFLAGS) dist \ |
| && rm -rf $(DIST_ARCHIVES) \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ |
| && cd "$$am__cwd" \ |
| || exit 1 |
| $(am__post_remove_distdir) |
| @(echo "$(distdir) archives ready for distribution: "; \ |
| list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
| sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' |
| distuninstallcheck: |
| @test -n '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: trying to run $@ with an empty' \ |
| '$$(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| $(am__cd) '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left after uninstall:" ; \ |
| if test -n "$(DESTDIR)"; then \ |
| echo " (check DESTDIR support)"; \ |
| fi ; \ |
| $(distuninstallcheck_listfiles) ; \ |
| exit 1; } >&2 |
| distcleancheck: distclean |
| @if test '$(srcdir)' = . ; then \ |
| echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| exit 1 ; \ |
| fi |
| @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left in build directory after distclean:" ; \ |
| $(distcleancheck_listfiles) ; \ |
| exit 1; } >&2 |
| check-am: all-am |
| check: check-recursive |
| all-am: Makefile $(SCRIPTS) $(DATA) |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| if test -z '$(STRIP)'; then \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| install; \ |
| else \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| fi |
| mostlyclean-generic: |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-recursive |
| |
| clean-am: clean-generic clean-libtool mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-libtool \ |
| distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html-am: |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: install-pkgconfigDATA |
| @$(NORMAL_INSTALL) |
| $(MAKE) $(AM_MAKEFLAGS) install-data-hook |
| install-dvi: install-dvi-recursive |
| |
| install-dvi-am: |
| |
| install-exec-am: install-binSCRIPTS |
| |
| install-html: install-html-recursive |
| |
| install-html-am: |
| |
| install-info: install-info-recursive |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-recursive |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-recursive |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-binSCRIPTS uninstall-pkgconfigDATA |
| @$(NORMAL_INSTALL) |
| $(MAKE) $(AM_MAKEFLAGS) uninstall-hook |
| .MAKE: $(am__recursive_targets) install-am install-data-am \ |
| install-strip uninstall-am |
| |
| .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ |
| am--refresh check check-am clean clean-cscope clean-generic \ |
| clean-libtool cscope cscopelist-am ctags ctags-am dist \ |
| dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ |
| dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \ |
| distclean-generic distclean-libtool distclean-tags \ |
| distcleancheck distdir distuninstallcheck dvi dvi-am html \ |
| html-am info info-am install install-am install-binSCRIPTS \ |
| install-data install-data-am install-data-hook install-dvi \ |
| install-dvi-am install-exec install-exec-am install-html \ |
| install-html-am install-info install-info-am install-man \ |
| install-pdf install-pdf-am install-pkgconfigDATA install-ps \ |
| install-ps-am install-strip installcheck installcheck-am \ |
| installdirs installdirs-am maintainer-clean \ |
| maintainer-clean-generic mostlyclean mostlyclean-generic \ |
| mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ |
| uninstall-am uninstall-binSCRIPTS uninstall-hook \ |
| uninstall-pkgconfigDATA |
| |
| .PRECIOUS: Makefile |
| |
| |
| # List of files required to generate VC IDE .dsp, .vcproj and .vcxproj files |
| |
| dist-hook: |
| rm -rf $(top_builddir)/tests/log |
| find $(distdir) -name "*.dist" -exec rm {} \; |
| (distit=`find $(srcdir) -name "*.dist" | grep -v ./ares/`; \ |
| for file in $$distit; do \ |
| strip=`echo $$file | sed -e s/^$(srcdir)// -e s/\.dist//`; \ |
| cp -p $$file $(distdir)$$strip; \ |
| done) |
| |
| html: |
| cd docs && $(MAKE) html |
| |
| pdf: |
| cd docs && $(MAKE) pdf |
| |
| check: test examples check-docs |
| |
| @CROSSCOMPILING_TRUE@test-full: test |
| @CROSSCOMPILING_TRUE@test-torture: test |
| |
| @CROSSCOMPILING_TRUE@test: |
| @CROSSCOMPILING_TRUE@ @echo "NOTICE: we can't run the tests when cross-compiling!" |
| |
| @CROSSCOMPILING_FALSE@test: |
| @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all quiet-test) |
| |
| @CROSSCOMPILING_FALSE@test-full: |
| @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all full-test) |
| |
| @CROSSCOMPILING_FALSE@test-nonflaky: |
| @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all nonflaky-test) |
| |
| @CROSSCOMPILING_FALSE@test-torture: |
| @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all torture-test) |
| |
| @CROSSCOMPILING_FALSE@test-event: |
| @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all event-test) |
| |
| @CROSSCOMPILING_FALSE@test-am: |
| @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all am-test) |
| |
| @CROSSCOMPILING_FALSE@test-ci: |
| @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all ci-test) |
| |
| examples: |
| @(cd docs/examples; $(MAKE) check) |
| |
| check-docs: |
| @(cd docs/libcurl; $(MAKE) check) |
| |
| # Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros |
| # must contain the following line: |
| # %_topdir /home/loic/local/rpm |
| # and that /home/loic/local/rpm contains the directory SOURCES, BUILD etc. |
| # |
| # cd /home/loic/local/rpm ; mkdir -p SOURCES BUILD RPMS/i386 SPECS SRPMS |
| # |
| # If additional configure flags are needed to build the package, add the |
| # following in ~/.rpmmacros |
| # %configure CFLAGS="%{optflags}" ./configure %{_target_platform} --prefix=%{_prefix} ${AM_CONFIGFLAGS} |
| # and run make rpm in the following way: |
| # AM_CONFIGFLAGS='--with-uri=/home/users/loic/local/RedHat-6.2' make rpm |
| # |
| |
| rpms: |
| $(MAKE) RPMDIST=curl rpm |
| $(MAKE) RPMDIST=curl-ssl rpm |
| |
| rpm: |
| RPM_TOPDIR=`rpm --showrc | $(PERL) -n -e 'print if(s/.*_topdir\s+(.*)/$$1/)'` ; \ |
| cp $(srcdir)/packages/Linux/RPM/$(RPMDIST).spec $$RPM_TOPDIR/SPECS ; \ |
| cp $(PACKAGE)-$(VERSION).tar.gz $$RPM_TOPDIR/SOURCES ; \ |
| rpm -ba --clean --rmsource $$RPM_TOPDIR/SPECS/$(RPMDIST).spec ; \ |
| mv $$RPM_TOPDIR/RPMS/i386/$(RPMDIST)-*.rpm . ; \ |
| mv $$RPM_TOPDIR/SRPMS/$(RPMDIST)-*.src.rpm . |
| |
| # |
| # Build a Solaris pkgadd format file |
| # run 'make pkgadd' once you've done './configure' and 'make' to make a Solaris pkgadd format |
| # file (which ends up back in this directory). |
| # The pkgadd file is in 'pkgtrans' format, so to install on Solaris, do |
| # pkgadd -d ./HAXXcurl-* |
| # |
| |
| # gak - libtool requires an absolute directory, hence the pwd below... |
| pkgadd: |
| umask 022 ; \ |
| $(MAKE) install DESTDIR=`/bin/pwd`/packages/Solaris/root ; \ |
| cat COPYING > $(srcdir)/packages/Solaris/copyright ; \ |
| cd $(srcdir)/packages/Solaris && $(MAKE) package |
| |
| # |
| # Build a cygwin binary tarball installation file |
| # resulting .tar.bz2 file will end up at packages/Win32/cygwin |
| cygwinbin: |
| $(MAKE) -C packages/Win32/cygwin cygwinbin |
| |
| # We extend the standard install with a custom hook: |
| install-data-hook: |
| (cd include && $(MAKE) install) |
| (cd docs && $(MAKE) install) |
| (cd docs/libcurl && $(MAKE) install) |
| |
| # We extend the standard uninstall with a custom hook: |
| uninstall-hook: |
| (cd include && $(MAKE) uninstall) |
| (cd docs && $(MAKE) uninstall) |
| (cd docs/libcurl && $(MAKE) uninstall) |
| |
| ca-bundle: $(srcdir)/scripts/mk-ca-bundle.pl |
| @echo "generating a fresh ca-bundle.crt" |
| @perl $(srcdir)/scripts/mk-ca-bundle.pl -b -l -u lib/ca-bundle.crt |
| |
| ca-firefox: $(srcdir)/scripts/firefox-db2pem.sh |
| @echo "generating a fresh ca-bundle.crt" |
| $(srcdir)/scripts/firefox-db2pem.sh lib/ca-bundle.crt |
| |
| checksrc: |
| (cd lib && $(MAKE) checksrc) |
| (cd src && $(MAKE) checksrc) |
| (cd tests && $(MAKE) checksrc) |
| (cd include/curl && $(MAKE) checksrc) |
| (cd docs/examples && $(MAKE) checksrc) |
| (cd packages && $(MAKE) checksrc) |
| |
| .PHONY: vc-ide |
| |
| vc-ide: $(VC10_LIBVCXPROJ_DEPS) $(VC10_SRCVCXPROJ_DEPS) \ |
| $(VC11_LIBVCXPROJ_DEPS) $(VC11_SRCVCXPROJ_DEPS) $(VC12_LIBVCXPROJ_DEPS) \ |
| $(VC12_SRCVCXPROJ_DEPS) $(VC14_LIBVCXPROJ_DEPS) $(VC14_SRCVCXPROJ_DEPS) \ |
| $(VC14_10_LIBVCXPROJ_DEPS) $(VC14_10_SRCVCXPROJ_DEPS) \ |
| $(VC14_30_LIBVCXPROJ_DEPS) $(VC14_30_SRCVCXPROJ_DEPS) |
| @(win32_lib_srcs='$(LIB_CFILES)'; \ |
| win32_lib_hdrs='$(LIB_HFILES) config-win32.h'; \ |
| win32_lib_rc='$(LIB_RCFILES)'; \ |
| win32_lib_vauth_srcs='$(LIB_VAUTH_CFILES)'; \ |
| win32_lib_vauth_hdrs='$(LIB_VAUTH_HFILES)'; \ |
| win32_lib_vquic_srcs='$(LIB_VQUIC_CFILES)'; \ |
| win32_lib_vquic_hdrs='$(LIB_VQUIC_HFILES)'; \ |
| win32_lib_vssh_srcs='$(LIB_VSSH_CFILES)'; \ |
| win32_lib_vssh_hdrs='$(LIB_VSSH_HFILES)'; \ |
| win32_lib_vtls_srcs='$(LIB_VTLS_CFILES)'; \ |
| win32_lib_vtls_hdrs='$(LIB_VTLS_HFILES)'; \ |
| win32_src_srcs='$(CURL_CFILES)'; \ |
| win32_src_hdrs='$(CURL_HFILES)'; \ |
| win32_src_rc='$(CURL_RCFILES)'; \ |
| win32_src_x_srcs='$(CURLX_CFILES)'; \ |
| win32_src_x_hdrs='$(CURLX_HFILES) ../lib/config-win32.h'; \ |
| \ |
| sorted_lib_srcs=`for file in $$win32_lib_srcs; do echo $$file; done | sort`; \ |
| sorted_lib_hdrs=`for file in $$win32_lib_hdrs; do echo $$file; done | sort`; \ |
| sorted_lib_vauth_srcs=`for file in $$win32_lib_vauth_srcs; do echo $$file; done | sort`; \ |
| sorted_lib_vauth_hdrs=`for file in $$win32_lib_vauth_hdrs; do echo $$file; done | sort`; \ |
| sorted_lib_vquic_srcs=`for file in $$win32_lib_vquic_srcs; do echo $$file; done | sort`; \ |
| sorted_lib_vquic_hdrs=`for file in $$win32_lib_vquic_hdrs; do echo $$file; done | sort`; \ |
| sorted_lib_vssh_srcs=`for file in $$win32_lib_vssh_srcs; do echo $$file; done | sort`; \ |
| sorted_lib_vssh_hdrs=`for file in $$win32_lib_vssh_hdrs; do echo $$file; done | sort`; \ |
| sorted_lib_vtls_srcs=`for file in $$win32_lib_vtls_srcs; do echo $$file; done | sort`; \ |
| sorted_lib_vtls_hdrs=`for file in $$win32_lib_vtls_hdrs; do echo $$file; done | sort`; \ |
| sorted_src_srcs=`for file in $$win32_src_srcs; do echo $$file; done | sort`; \ |
| sorted_src_hdrs=`for file in $$win32_src_hdrs; do echo $$file; done | sort`; \ |
| sorted_src_x_srcs=`for file in $$win32_src_x_srcs; do echo $$file; done | sort`; \ |
| sorted_src_x_hdrs=`for file in $$win32_src_x_hdrs; do echo $$file; done | sort`; \ |
| \ |
| awk_code='\ |
| function gen_element(type, dir, file)\ |
| {\ |
| sub(/vauth\//, "", file);\ |
| sub(/vquic\//, "", file);\ |
| sub(/vssh\//, "", file);\ |
| sub(/vtls\//, "", file);\ |
| \ |
| spaces=" ";\ |
| if(dir == "lib\\vauth" ||\ |
| dir == "lib\\vquic" ||\ |
| dir == "lib\\vssh" ||\ |
| dir == "lib\\vtls")\ |
| tabs=" ";\ |
| else\ |
| tabs=" ";\ |
| \ |
| if(type == "dsp") {\ |
| printf("# Begin Source File\r\n");\ |
| printf("\r\n");\ |
| printf("SOURCE=..\\..\\..\\..\\%s\\%s\r\n", dir, file);\ |
| printf("# End Source File\r\n");\ |
| }\ |
| else if(type == "vcproj1") {\ |
| printf("%s<File\r\n", tabs);\ |
| printf("%s RelativePath=\"..\\..\\..\\..\\%s\\%s\">\r\n",\ |
| tabs, dir, file);\ |
| printf("%s</File>\r\n", tabs);\ |
| }\ |
| else if(type == "vcproj2") {\ |
| printf("%s<File\r\n", tabs);\ |
| printf("%s RelativePath=\"..\\..\\..\\..\\%s\\%s\"\r\n",\ |
| tabs, dir, file);\ |
| printf("%s>\r\n", tabs);\ |
| printf("%s</File>\r\n", tabs);\ |
| }\ |
| else if(type == "vcxproj") {\ |
| i = index(file, ".");\ |
| ext = substr(file, i == 0 ? 0 : i + 1);\ |
| \ |
| if(ext == "c")\ |
| printf("%s<ClCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\ |
| spaces, dir, file);\ |
| else if(ext == "h")\ |
| printf("%s<ClInclude Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\ |
| spaces, dir, file);\ |
| else if(ext == "rc")\ |
| printf("%s<ResourceCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\ |
| spaces, dir, file);\ |
| }\ |
| }\ |
| \ |
| {\ |
| \ |
| if($$0 == "CURL_LIB_C_FILES") {\ |
| split(lib_srcs, arr);\ |
| for(val in arr) gen_element(proj_type, "lib", arr[val]);\ |
| }\ |
| else if($$0 == "CURL_LIB_H_FILES") {\ |
| split(lib_hdrs, arr);\ |
| for(val in arr) gen_element(proj_type, "lib", arr[val]);\ |
| }\ |
| else if($$0 == "CURL_LIB_RC_FILES") {\ |
| split(lib_rc, arr);\ |
| for(val in arr) gen_element(proj_type, "lib", arr[val]);\ |
| }\ |
| else if($$0 == "CURL_LIB_VAUTH_C_FILES") {\ |
| split(lib_vauth_srcs, arr);\ |
| for(val in arr) gen_element(proj_type, "lib\\vauth", arr[val]);\ |
| }\ |
| else if($$0 == "CURL_LIB_VAUTH_H_FILES") {\ |
| split(lib_vauth_hdrs, arr);\ |
| for(val in arr) gen_element(proj_type, "lib\\vauth", arr[val]);\ |
| }\ |
| else if($$0 == "CURL_LIB_VQUIC_C_FILES") {\ |
| split(lib_vquic_srcs, arr);\ |
| for(val in arr) gen_element(proj_type, "lib\\vquic", arr[val]);\ |
| }\ |
| else if($$0 == "CURL_LIB_VQUIC_H_FILES") {\ |
| split(lib_vquic_hdrs, arr);\ |
| for(val in arr) gen_element(proj_type, "lib\\vquic", arr[val]);\ |
| }\ |
| else if($$0 == "CURL_LIB_VSSH_C_FILES") {\ |
| split(lib_vssh_srcs, arr);\ |
| for(val in arr) gen_element(proj_type, "lib\\vssh", arr[val]);\ |
| }\ |
| else if($$0 == "CURL_LIB_VSSH_H_FILES") {\ |
| split(lib_vssh_hdrs, arr);\ |
| for(val in arr) gen_element(proj_type, "lib\\vssh", arr[val]);\ |
| }\ |
| else if($$0 == "CURL_LIB_VTLS_C_FILES") {\ |
| split(lib_vtls_srcs, arr);\ |
| for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\ |
| }\ |
| else if($$0 == "CURL_LIB_VTLS_H_FILES") {\ |
| split(lib_vtls_hdrs, arr);\ |
| for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\ |
| }\ |
| else if($$0 == "CURL_SRC_C_FILES") {\ |
| split(src_srcs, arr);\ |
| for(val in arr) gen_element(proj_type, "src", arr[val]);\ |
| }\ |
| else if($$0 == "CURL_SRC_H_FILES") {\ |
| split(src_hdrs, arr);\ |
| for(val in arr) gen_element(proj_type, "src", arr[val]);\ |
| }\ |
| else if($$0 == "CURL_SRC_RC_FILES") {\ |
| split(src_rc, arr);\ |
| for(val in arr) gen_element(proj_type, "src", arr[val]);\ |
| }\ |
| else if($$0 == "CURL_SRC_X_C_FILES") {\ |
| split(src_x_srcs, arr);\ |
| for(val in arr) {\ |
| sub(/..\/lib\//, "", arr[val]);\ |
| gen_element(proj_type, "lib", arr[val]);\ |
| }\ |
| }\ |
| else if($$0 == "CURL_SRC_X_H_FILES") {\ |
| split(src_x_hdrs, arr);\ |
| for(val in arr) {\ |
| sub(/..\/lib\//, "", arr[val]);\ |
| gen_element(proj_type, "lib", arr[val]);\ |
| }\ |
| }\ |
| else\ |
| printf("%s\r\n", $$0);\ |
| }';\ |
| \ |
| echo "generating '$(VC10_LIBVCXPROJ)'"; \ |
| awk -v proj_type=vcxproj \ |
| -v lib_srcs="$$sorted_lib_srcs" \ |
| -v lib_hdrs="$$sorted_lib_hdrs" \ |
| -v lib_rc="$$win32_lib_rc" \ |
| -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \ |
| -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \ |
| -v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \ |
| -v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \ |
| -v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \ |
| -v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \ |
| -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \ |
| -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \ |
| "$$awk_code" $(srcdir)/$(VC10_LIBTMPL) > $(VC10_LIBVCXPROJ) || { exit 1; }; \ |
| \ |
| echo "generating '$(VC10_SRCVCXPROJ)'"; \ |
| awk -v proj_type=vcxproj \ |
| -v src_srcs="$$sorted_src_srcs" \ |
| -v src_hdrs="$$sorted_src_hdrs" \ |
| -v src_rc="$$win32_src_rc" \ |
| -v src_x_srcs="$$sorted_src_x_srcs" \ |
| -v src_x_hdrs="$$sorted_src_x_hdrs" \ |
| "$$awk_code" $(srcdir)/$(VC10_SRCTMPL) > $(VC10_SRCVCXPROJ) || { exit 1; }; \ |
| \ |
| echo "generating '$(VC11_LIBVCXPROJ)'"; \ |
| awk -v proj_type=vcxproj \ |
| -v lib_srcs="$$sorted_lib_srcs" \ |
| -v lib_hdrs="$$sorted_lib_hdrs" \ |
| -v lib_rc="$$win32_lib_rc" \ |
| -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \ |
| -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \ |
| -v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \ |
| -v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \ |
| -v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \ |
| -v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \ |
| -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \ |
| -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \ |
| "$$awk_code" $(srcdir)/$(VC11_LIBTMPL) > $(VC11_LIBVCXPROJ) || { exit 1; }; \ |
| \ |
| echo "generating '$(VC11_SRCVCXPROJ)'"; \ |
| awk -v proj_type=vcxproj \ |
| -v src_srcs="$$sorted_src_srcs" \ |
| -v src_hdrs="$$sorted_src_hdrs" \ |
| -v src_rc="$$win32_src_rc" \ |
| -v src_x_srcs="$$sorted_src_x_srcs" \ |
| -v src_x_hdrs="$$sorted_src_x_hdrs" \ |
| "$$awk_code" $(srcdir)/$(VC11_SRCTMPL) > $(VC11_SRCVCXPROJ) || { exit 1; }; \ |
| \ |
| echo "generating '$(VC12_LIBVCXPROJ)'"; \ |
| awk -v proj_type=vcxproj \ |
| -v lib_srcs="$$sorted_lib_srcs" \ |
| -v lib_hdrs="$$sorted_lib_hdrs" \ |
| -v lib_rc="$$win32_lib_rc" \ |
| -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \ |
| -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \ |
| -v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \ |
| -v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \ |
| -v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \ |
| -v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \ |
| -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \ |
| -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \ |
| "$$awk_code" $(srcdir)/$(VC12_LIBTMPL) > $(VC12_LIBVCXPROJ) || { exit 1; }; \ |
| \ |
| echo "generating '$(VC12_SRCVCXPROJ)'"; \ |
| awk -v proj_type=vcxproj \ |
| -v src_srcs="$$sorted_src_srcs" \ |
| -v src_hdrs="$$sorted_src_hdrs" \ |
| -v src_rc="$$win32_src_rc" \ |
| -v src_x_srcs="$$sorted_src_x_srcs" \ |
| -v src_x_hdrs="$$sorted_src_x_hdrs" \ |
| "$$awk_code" $(srcdir)/$(VC12_SRCTMPL) > $(VC12_SRCVCXPROJ) || { exit 1; }; \ |
| \ |
| echo "generating '$(VC14_LIBVCXPROJ)'"; \ |
| awk -v proj_type=vcxproj \ |
| -v lib_srcs="$$sorted_lib_srcs" \ |
| -v lib_hdrs="$$sorted_lib_hdrs" \ |
| -v lib_rc="$$win32_lib_rc" \ |
| -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \ |
| -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \ |
| -v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \ |
| -v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \ |
| -v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \ |
| -v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \ |
| -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \ |
| -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \ |
| "$$awk_code" $(srcdir)/$(VC14_LIBTMPL) > $(VC14_LIBVCXPROJ) || { exit 1; }; \ |
| \ |
| echo "generating '$(VC14_SRCVCXPROJ)'"; \ |
| awk -v proj_type=vcxproj \ |
| -v src_srcs="$$sorted_src_srcs" \ |
| -v src_hdrs="$$sorted_src_hdrs" \ |
| -v src_rc="$$win32_src_rc" \ |
| -v src_x_srcs="$$sorted_src_x_srcs" \ |
| -v src_x_hdrs="$$sorted_src_x_hdrs" \ |
| "$$awk_code" $(srcdir)/$(VC14_SRCTMPL) > $(VC14_SRCVCXPROJ) || { exit 1; }; \ |
| \ |
| echo "generating '$(VC14_10_LIBVCXPROJ)'"; \ |
| awk -v proj_type=vcxproj \ |
| -v lib_srcs="$$sorted_lib_srcs" \ |
| -v lib_hdrs="$$sorted_lib_hdrs" \ |
| -v lib_rc="$$win32_lib_rc" \ |
| -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \ |
| -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \ |
| -v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \ |
| -v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \ |
| -v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \ |
| -v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \ |
| -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \ |
| -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \ |
| "$$awk_code" $(srcdir)/$(VC14_10_LIBTMPL) > $(VC14_10_LIBVCXPROJ) || { exit 1; }; \ |
| \ |
| echo "generating '$(VC14_10_SRCVCXPROJ)'"; \ |
| awk -v proj_type=vcxproj \ |
| -v src_srcs="$$sorted_src_srcs" \ |
| -v src_hdrs="$$sorted_src_hdrs" \ |
| -v src_rc="$$win32_src_rc" \ |
| -v src_x_srcs="$$sorted_src_x_srcs" \ |
| -v src_x_hdrs="$$sorted_src_x_hdrs" \ |
| "$$awk_code" $(srcdir)/$(VC14_10_SRCTMPL) > $(VC14_10_SRCVCXPROJ) || { exit 1; }; \ |
| \ |
| echo "generating '$(VC14_30_LIBVCXPROJ)'"; \ |
| awk -v proj_type=vcxproj \ |
| -v lib_srcs="$$sorted_lib_srcs" \ |
| -v lib_hdrs="$$sorted_lib_hdrs" \ |
| -v lib_rc="$$win32_lib_rc" \ |
| -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \ |
| -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \ |
| -v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \ |
| -v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \ |
| -v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \ |
| -v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \ |
| -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \ |
| -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \ |
| "$$awk_code" $(srcdir)/$(VC14_30_LIBTMPL) > $(VC14_30_LIBVCXPROJ) || { exit 1; }; \ |
| \ |
| echo "generating '$(VC14_30_SRCVCXPROJ)'"; \ |
| awk -v proj_type=vcxproj \ |
| -v src_srcs="$$sorted_src_srcs" \ |
| -v src_hdrs="$$sorted_src_hdrs" \ |
| -v src_rc="$$win32_src_rc" \ |
| -v src_x_srcs="$$sorted_src_x_srcs" \ |
| -v src_x_hdrs="$$sorted_src_x_hdrs" \ |
| "$$awk_code" $(srcdir)/$(VC14_30_SRCTMPL) > $(VC14_30_SRCVCXPROJ) || { exit 1; };) |
| |
| tidy: |
| (cd src && $(MAKE) tidy) |
| (cd lib && $(MAKE) tidy) |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |