diff --git a/ap/lib/libcurl/curl-7.86.0/include/Makefile.am b/ap/lib/libcurl/curl-7.86.0/include/Makefile.am
new file mode 100755
index 0000000..32d7b33
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/Makefile.am
@@ -0,0 +1,28 @@
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at https://curl.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+# SPDX-License-Identifier: curl
+#
+###########################################################################
+SUBDIRS = curl
+
+EXTRA_DIST = README.md
+
+AUTOMAKE_OPTIONS = foreign no-dependencies
diff --git a/ap/lib/libcurl/curl-7.86.0/include/Makefile.in b/ap/lib/libcurl/curl-7.86.0/include/Makefile.in
new file mode 100755
index 0000000..6fddc70
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/Makefile.in
@@ -0,0 +1,766 @@
+# Makefile.in generated by automake 1.16.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = include
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/curl-amissl.m4 \
+	$(top_srcdir)/m4/curl-bearssl.m4 \
+	$(top_srcdir)/m4/curl-compilers.m4 \
+	$(top_srcdir)/m4/curl-confopts.m4 \
+	$(top_srcdir)/m4/curl-functions.m4 \
+	$(top_srcdir)/m4/curl-gnutls.m4 \
+	$(top_srcdir)/m4/curl-mbedtls.m4 $(top_srcdir)/m4/curl-nss.m4 \
+	$(top_srcdir)/m4/curl-openssl.m4 \
+	$(top_srcdir)/m4/curl-override.m4 \
+	$(top_srcdir)/m4/curl-reentrant.m4 \
+	$(top_srcdir)/m4/curl-rustls.m4 \
+	$(top_srcdir)/m4/curl-schannel.m4 \
+	$(top_srcdir)/m4/curl-sectransp.m4 \
+	$(top_srcdir)/m4/curl-sysconfig.m4 \
+	$(top_srcdir)/m4/curl-wolfssl.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/xc-am-iface.m4 \
+	$(top_srcdir)/m4/xc-cc-check.m4 \
+	$(top_srcdir)/m4/xc-lt-iface.m4 \
+	$(top_srcdir)/m4/xc-translit.m4 \
+	$(top_srcdir)/m4/xc-val-flgs.m4 \
+	$(top_srcdir)/m4/zz40-xc-ovr.m4 \
+	$(top_srcdir)/m4/zz50-xc-ovr.m4 \
+	$(top_srcdir)/m4/zz60-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/lib/curl_config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+depcomp =
+am__maybe_remake_depfiles =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	distdir distdir-am
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in README.md
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AR_FLAGS = @AR_FLAGS@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BLANK_AT_MAKETIME = @BLANK_AT_MAKETIME@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@
+CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CPPFLAG_CURL_STATICLIB = @CPPFLAG_CURL_STATICLIB@
+CSCOPE = @CSCOPE@
+CTAGS = @CTAGS@
+CURLVERSION = @CURLVERSION@
+CURL_CA_BUNDLE = @CURL_CA_BUNDLE@
+CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@
+CURL_DISABLE_DICT = @CURL_DISABLE_DICT@
+CURL_DISABLE_FILE = @CURL_DISABLE_FILE@
+CURL_DISABLE_FTP = @CURL_DISABLE_FTP@
+CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@
+CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@
+CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@
+CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@
+CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@
+CURL_DISABLE_MQTT = @CURL_DISABLE_MQTT@
+CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@
+CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@
+CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@
+CURL_DISABLE_SMB = @CURL_DISABLE_SMB@
+CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@
+CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@
+CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@
+CURL_LT_SHLIB_VERSIONED_FLAVOUR = @CURL_LT_SHLIB_VERSIONED_FLAVOUR@
+CURL_NETWORK_AND_TIME_LIBS = @CURL_NETWORK_AND_TIME_LIBS@
+CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@
+CURL_PLIST_VERSION = @CURL_PLIST_VERSION@
+CURL_WITH_MULTI_SSL = @CURL_WITH_MULTI_SSL@
+CYGPATH_W = @CYGPATH_W@
+DEFAULT_SSL_BACKEND = @DEFAULT_SSL_BACKEND@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+ENABLE_SHARED = @ENABLE_SHARED@
+ENABLE_STATIC = @ENABLE_STATIC@
+ETAGS = @ETAGS@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FILECMD = @FILECMD@
+FISH_FUNCTIONS_DIR = @FISH_FUNCTIONS_DIR@
+GCOV = @GCOV@
+GREP = @GREP@
+HAVE_BROTLI = @HAVE_BROTLI@
+HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@
+HAVE_LDAP_SSL = @HAVE_LDAP_SSL@
+HAVE_LIBZ = @HAVE_LIBZ@
+HAVE_OPENSSL_SRP = @HAVE_OPENSSL_SRP@
+HAVE_PROTO_BSDSOCKET_H = @HAVE_PROTO_BSDSOCKET_H@
+HAVE_ZSTD = @HAVE_ZSTD@
+IDN_ENABLED = @IDN_ENABLED@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+IPV6_ENABLED = @IPV6_ENABLED@
+LCOV = @LCOV@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBCURL_LIBS = @LIBCURL_LIBS@
+LIBCURL_NO_SHARED = @LIBCURL_NO_SHARED@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MANOPT = @MANOPT@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NROFF = @NROFF@
+NSS_LIBS = @NSS_LIBS@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PKGADD_NAME = @PKGADD_NAME@
+PKGADD_PKG = @PKGADD_PKG@
+PKGADD_VENDOR = @PKGADD_VENDOR@
+PKGCONFIG = @PKGCONFIG@
+RANDOM_FILE = @RANDOM_FILE@
+RANLIB = @RANLIB@
+RC = @RC@
+REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SSL_BACKENDS = @SSL_BACKENDS@
+SSL_ENABLED = @SSL_ENABLED@
+SSL_LIBS = @SSL_LIBS@
+STRIP = @STRIP@
+SUPPORT_FEATURES = @SUPPORT_FEATURES@
+SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@
+USE_ARES = @USE_ARES@
+USE_BEARSSL = @USE_BEARSSL@
+USE_GNUTLS = @USE_GNUTLS@
+USE_HYPER = @USE_HYPER@
+USE_LIBRTMP = @USE_LIBRTMP@
+USE_LIBSSH = @USE_LIBSSH@
+USE_LIBSSH2 = @USE_LIBSSH2@
+USE_MBEDTLS = @USE_MBEDTLS@
+USE_MSH3 = @USE_MSH3@
+USE_NGHTTP2 = @USE_NGHTTP2@
+USE_NGHTTP3 = @USE_NGHTTP3@
+USE_NGTCP2 = @USE_NGTCP2@
+USE_NGTCP2_CRYPTO_GNUTLS = @USE_NGTCP2_CRYPTO_GNUTLS@
+USE_NGTCP2_CRYPTO_OPENSSL = @USE_NGTCP2_CRYPTO_OPENSSL@
+USE_NGTCP2_CRYPTO_WOLFSSL = @USE_NGTCP2_CRYPTO_WOLFSSL@
+USE_NSS = @USE_NSS@
+USE_OPENLDAP = @USE_OPENLDAP@
+USE_QUICHE = @USE_QUICHE@
+USE_RUSTLS = @USE_RUSTLS@
+USE_SCHANNEL = @USE_SCHANNEL@
+USE_SECTRANSP = @USE_SECTRANSP@
+USE_UNIX_SOCKETS = @USE_UNIX_SOCKETS@
+USE_WIN32_CRYPTO = @USE_WIN32_CRYPTO@
+USE_WIN32_LARGE_FILES = @USE_WIN32_LARGE_FILES@
+USE_WIN32_SMALL_FILES = @USE_WIN32_SMALL_FILES@
+USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@
+USE_WOLFSSH = @USE_WOLFSSH@
+USE_WOLFSSL = @USE_WOLFSSL@
+VERSION = @VERSION@
+VERSIONNUM = @VERSIONNUM@
+ZLIB_LIBS = @ZLIB_LIBS@
+ZSH_FUNCTIONS_DIR = @ZSH_FUNCTIONS_DIR@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+libext = @libext@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at https://curl.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+# SPDX-License-Identifier: curl
+#
+###########################################################################
+SUBDIRS = curl
+EXTRA_DIST = README.md
+AUTOMAKE_OPTIONS = foreign no-dependencies
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign include/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign include/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
+	check-am clean clean-generic clean-libtool cscopelist-am ctags \
+	ctags-am distclean distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/ap/lib/libcurl/curl-7.86.0/include/README.md b/ap/lib/libcurl/curl-7.86.0/include/README.md
new file mode 100755
index 0000000..8fdbe0e
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/README.md
@@ -0,0 +1,20 @@
+<!--
+Copyright (C) 2000 - 2022 Daniel Stenberg, <daniel@haxx.se>, et al.
+
+SPDX-License-Identifier: curl
+-->
+
+# include
+
+Public include files for libcurl, external users.
+
+They're all placed in the curl subdirectory here for better fit in any kind of
+environment. You must include files from here using...
+
+    #include <curl/curl.h>
+
+... style and point the compiler's include path to the directory holding the
+curl subdirectory. It makes it more likely to survive future modifications.
+
+The public curl include files can be shared freely between different platforms
+and different architectures.
diff --git a/ap/lib/libcurl/curl-7.86.0/include/curl/Makefile.am b/ap/lib/libcurl/curl-7.86.0/include/curl/Makefile.am
new file mode 100755
index 0000000..29f470c
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/curl/Makefile.am
@@ -0,0 +1,41 @@
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at https://curl.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+# SPDX-License-Identifier: curl
+#
+###########################################################################
+pkginclude_HEADERS = \
+  curl.h curlver.h easy.h mprintf.h stdcheaders.h multi.h \
+  typecheck-gcc.h system.h urlapi.h options.h header.h websockets.h
+
+pkgincludedir= $(includedir)/curl
+
+CHECKSRC = $(CS_$(V))
+CS_0 = @echo "  RUN     " $@;
+CS_1 =
+CS_ = $(CS_0)
+
+checksrc:
+	$(CHECKSRC)@PERL@ $(top_srcdir)/scripts/checksrc.pl -D$(top_srcdir)/include/curl $(pkginclude_HEADERS)
+
+if CURLDEBUG
+# for debug builds, we scan the sources on all regular make invokes
+all-local: checksrc
+endif
diff --git a/ap/lib/libcurl/curl-7.86.0/include/curl/Makefile.in b/ap/lib/libcurl/curl-7.86.0/include/curl/Makefile.in
new file mode 100755
index 0000000..89675ba
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/curl/Makefile.in
@@ -0,0 +1,717 @@
+# Makefile.in generated by automake 1.16.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = include/curl
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/curl-amissl.m4 \
+	$(top_srcdir)/m4/curl-bearssl.m4 \
+	$(top_srcdir)/m4/curl-compilers.m4 \
+	$(top_srcdir)/m4/curl-confopts.m4 \
+	$(top_srcdir)/m4/curl-functions.m4 \
+	$(top_srcdir)/m4/curl-gnutls.m4 \
+	$(top_srcdir)/m4/curl-mbedtls.m4 $(top_srcdir)/m4/curl-nss.m4 \
+	$(top_srcdir)/m4/curl-openssl.m4 \
+	$(top_srcdir)/m4/curl-override.m4 \
+	$(top_srcdir)/m4/curl-reentrant.m4 \
+	$(top_srcdir)/m4/curl-rustls.m4 \
+	$(top_srcdir)/m4/curl-schannel.m4 \
+	$(top_srcdir)/m4/curl-sectransp.m4 \
+	$(top_srcdir)/m4/curl-sysconfig.m4 \
+	$(top_srcdir)/m4/curl-wolfssl.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/xc-am-iface.m4 \
+	$(top_srcdir)/m4/xc-cc-check.m4 \
+	$(top_srcdir)/m4/xc-lt-iface.m4 \
+	$(top_srcdir)/m4/xc-translit.m4 \
+	$(top_srcdir)/m4/xc-val-flgs.m4 \
+	$(top_srcdir)/m4/zz40-xc-ovr.m4 \
+	$(top_srcdir)/m4/zz50-xc-ovr.m4 \
+	$(top_srcdir)/m4/zz60-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(pkginclude_HEADERS) \
+	$(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/lib/curl_config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(pkgincludedir)"
+HEADERS = $(pkginclude_HEADERS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+am__DIST_COMMON = $(srcdir)/Makefile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+pkgincludedir = $(includedir)/curl
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AR_FLAGS = @AR_FLAGS@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BLANK_AT_MAKETIME = @BLANK_AT_MAKETIME@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@
+CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CPPFLAG_CURL_STATICLIB = @CPPFLAG_CURL_STATICLIB@
+CSCOPE = @CSCOPE@
+CTAGS = @CTAGS@
+CURLVERSION = @CURLVERSION@
+CURL_CA_BUNDLE = @CURL_CA_BUNDLE@
+CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@
+CURL_DISABLE_DICT = @CURL_DISABLE_DICT@
+CURL_DISABLE_FILE = @CURL_DISABLE_FILE@
+CURL_DISABLE_FTP = @CURL_DISABLE_FTP@
+CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@
+CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@
+CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@
+CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@
+CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@
+CURL_DISABLE_MQTT = @CURL_DISABLE_MQTT@
+CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@
+CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@
+CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@
+CURL_DISABLE_SMB = @CURL_DISABLE_SMB@
+CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@
+CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@
+CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@
+CURL_LT_SHLIB_VERSIONED_FLAVOUR = @CURL_LT_SHLIB_VERSIONED_FLAVOUR@
+CURL_NETWORK_AND_TIME_LIBS = @CURL_NETWORK_AND_TIME_LIBS@
+CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@
+CURL_PLIST_VERSION = @CURL_PLIST_VERSION@
+CURL_WITH_MULTI_SSL = @CURL_WITH_MULTI_SSL@
+CYGPATH_W = @CYGPATH_W@
+DEFAULT_SSL_BACKEND = @DEFAULT_SSL_BACKEND@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+ENABLE_SHARED = @ENABLE_SHARED@
+ENABLE_STATIC = @ENABLE_STATIC@
+ETAGS = @ETAGS@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FILECMD = @FILECMD@
+FISH_FUNCTIONS_DIR = @FISH_FUNCTIONS_DIR@
+GCOV = @GCOV@
+GREP = @GREP@
+HAVE_BROTLI = @HAVE_BROTLI@
+HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@
+HAVE_LDAP_SSL = @HAVE_LDAP_SSL@
+HAVE_LIBZ = @HAVE_LIBZ@
+HAVE_OPENSSL_SRP = @HAVE_OPENSSL_SRP@
+HAVE_PROTO_BSDSOCKET_H = @HAVE_PROTO_BSDSOCKET_H@
+HAVE_ZSTD = @HAVE_ZSTD@
+IDN_ENABLED = @IDN_ENABLED@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+IPV6_ENABLED = @IPV6_ENABLED@
+LCOV = @LCOV@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBCURL_LIBS = @LIBCURL_LIBS@
+LIBCURL_NO_SHARED = @LIBCURL_NO_SHARED@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MANOPT = @MANOPT@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NROFF = @NROFF@
+NSS_LIBS = @NSS_LIBS@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PKGADD_NAME = @PKGADD_NAME@
+PKGADD_PKG = @PKGADD_PKG@
+PKGADD_VENDOR = @PKGADD_VENDOR@
+PKGCONFIG = @PKGCONFIG@
+RANDOM_FILE = @RANDOM_FILE@
+RANLIB = @RANLIB@
+RC = @RC@
+REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SSL_BACKENDS = @SSL_BACKENDS@
+SSL_ENABLED = @SSL_ENABLED@
+SSL_LIBS = @SSL_LIBS@
+STRIP = @STRIP@
+SUPPORT_FEATURES = @SUPPORT_FEATURES@
+SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@
+USE_ARES = @USE_ARES@
+USE_BEARSSL = @USE_BEARSSL@
+USE_GNUTLS = @USE_GNUTLS@
+USE_HYPER = @USE_HYPER@
+USE_LIBRTMP = @USE_LIBRTMP@
+USE_LIBSSH = @USE_LIBSSH@
+USE_LIBSSH2 = @USE_LIBSSH2@
+USE_MBEDTLS = @USE_MBEDTLS@
+USE_MSH3 = @USE_MSH3@
+USE_NGHTTP2 = @USE_NGHTTP2@
+USE_NGHTTP3 = @USE_NGHTTP3@
+USE_NGTCP2 = @USE_NGTCP2@
+USE_NGTCP2_CRYPTO_GNUTLS = @USE_NGTCP2_CRYPTO_GNUTLS@
+USE_NGTCP2_CRYPTO_OPENSSL = @USE_NGTCP2_CRYPTO_OPENSSL@
+USE_NGTCP2_CRYPTO_WOLFSSL = @USE_NGTCP2_CRYPTO_WOLFSSL@
+USE_NSS = @USE_NSS@
+USE_OPENLDAP = @USE_OPENLDAP@
+USE_QUICHE = @USE_QUICHE@
+USE_RUSTLS = @USE_RUSTLS@
+USE_SCHANNEL = @USE_SCHANNEL@
+USE_SECTRANSP = @USE_SECTRANSP@
+USE_UNIX_SOCKETS = @USE_UNIX_SOCKETS@
+USE_WIN32_CRYPTO = @USE_WIN32_CRYPTO@
+USE_WIN32_LARGE_FILES = @USE_WIN32_LARGE_FILES@
+USE_WIN32_SMALL_FILES = @USE_WIN32_SMALL_FILES@
+USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@
+USE_WOLFSSH = @USE_WOLFSSH@
+USE_WOLFSSL = @USE_WOLFSSL@
+VERSION = @VERSION@
+VERSIONNUM = @VERSIONNUM@
+ZLIB_LIBS = @ZLIB_LIBS@
+ZSH_FUNCTIONS_DIR = @ZSH_FUNCTIONS_DIR@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+libext = @libext@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at https://curl.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+# SPDX-License-Identifier: curl
+#
+###########################################################################
+pkginclude_HEADERS = \
+  curl.h curlver.h easy.h mprintf.h stdcheaders.h multi.h \
+  typecheck-gcc.h system.h urlapi.h options.h header.h websockets.h
+
+CHECKSRC = $(CS_$(V))
+CS_0 = @echo "  RUN     " $@;
+CS_1 = 
+CS_ = $(CS_0)
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign include/curl/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign include/curl/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-pkgincludeHEADERS: $(pkginclude_HEADERS)
+	@$(NORMAL_INSTALL)
+	@list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgincludedir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \
+	done
+
+uninstall-pkgincludeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkgincludedir)'; $(am__uninstall_files_from_dir)
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+@CURLDEBUG_FALSE@all-local:
+all-am: Makefile $(HEADERS) all-local
+installdirs:
+	for dir in "$(DESTDIR)$(pkgincludedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-pkgincludeHEADERS
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-pkgincludeHEADERS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-am clean \
+	clean-generic clean-libtool cscopelist-am ctags ctags-am \
+	distclean distclean-generic distclean-libtool distclean-tags \
+	distdir dvi dvi-am html html-am info info-am install \
+	install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-pkgincludeHEADERS \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am uninstall-pkgincludeHEADERS
+
+.PRECIOUS: Makefile
+
+
+checksrc:
+	$(CHECKSRC)@PERL@ $(top_srcdir)/scripts/checksrc.pl -D$(top_srcdir)/include/curl $(pkginclude_HEADERS)
+
+# for debug builds, we scan the sources on all regular make invokes
+@CURLDEBUG_TRUE@all-local: checksrc
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/ap/lib/libcurl/curl-7.86.0/include/curl/curl.h b/ap/lib/libcurl/curl-7.86.0/include/curl/curl.h
new file mode 100755
index 0000000..e28dd0b
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/curl/curl.h
@@ -0,0 +1,3134 @@
+#ifndef CURLINC_CURL_H
+#define CURLINC_CURL_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * SPDX-License-Identifier: curl
+ *
+ ***************************************************************************/
+
+/*
+ * If you have libcurl problems, all docs and details are found here:
+ *   https://curl.se/libcurl/
+ */
+
+#ifdef CURL_NO_OLDIES
+#define CURL_STRICTER
+#endif
+
+#include "curlver.h"         /* libcurl version defines   */
+#include "system.h"          /* determine things run-time */
+
+/*
+ * Define CURL_WIN32 when build target is Win32 API
+ */
+
+#if (defined(_WIN32) || defined(__WIN32__) || defined(WIN32)) &&        \
+  !defined(__SYMBIAN32__)
+#define CURL_WIN32
+#endif
+
+#include <stdio.h>
+#include <limits.h>
+
+#if (defined(__FreeBSD__) && (__FreeBSD__ >= 2)) || defined(__MidnightBSD__)
+/* Needed for __FreeBSD_version or __MidnightBSD_version symbol definition */
+#include <osreldate.h>
+#endif
+
+/* The include stuff here below is mainly for time_t! */
+#include <sys/types.h>
+#include <time.h>
+
+#if defined(CURL_WIN32) && !defined(_WIN32_WCE) && !defined(__CYGWIN__)
+#if !(defined(_WINSOCKAPI_) || defined(_WINSOCK_H) || \
+      defined(__LWIP_OPT_H__) || defined(LWIP_HDR_OPT_H))
+/* The check above prevents the winsock2 inclusion if winsock.h already was
+   included, since they can't co-exist without problems */
+#include <winsock2.h>
+#include <ws2tcpip.h>
+#endif
+#endif
+
+/* HP-UX systems version 9, 10 and 11 lack sys/select.h and so does oldish
+   libc5-based Linux systems. Only include it on systems that are known to
+   require it! */
+#if defined(_AIX) || defined(__NOVELL_LIBC__) || defined(__NetBSD__) || \
+    defined(__minix) || defined(__SYMBIAN32__) || defined(__INTEGRITY) || \
+    defined(ANDROID) || defined(__ANDROID__) || defined(__OpenBSD__) || \
+    defined(__CYGWIN__) || defined(AMIGA) || defined(__NuttX__) || \
+   (defined(__FreeBSD_version) && (__FreeBSD_version < 800000)) || \
+   (defined(__MidnightBSD_version) && (__MidnightBSD_version < 100000)) || \
+    defined(__sun__)
+#include <sys/select.h>
+#endif
+
+#if !defined(CURL_WIN32) && !defined(_WIN32_WCE)
+#include <sys/socket.h>
+#endif
+
+#if !defined(CURL_WIN32)
+#include <sys/time.h>
+#endif
+
+/* Compatibility for non-Clang compilers */
+#ifndef __has_declspec_attribute
+#  define __has_declspec_attribute(x) 0
+#endif
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+#if defined(BUILDING_LIBCURL) || defined(CURL_STRICTER)
+typedef struct Curl_easy CURL;
+typedef struct Curl_share CURLSH;
+#else
+typedef void CURL;
+typedef void CURLSH;
+#endif
+
+/*
+ * libcurl external API function linkage decorations.
+ */
+
+#ifdef CURL_STATICLIB
+#  define CURL_EXTERN
+#elif defined(CURL_WIN32) || defined(__SYMBIAN32__) || \
+     (__has_declspec_attribute(dllexport) && \
+      __has_declspec_attribute(dllimport))
+#  if defined(BUILDING_LIBCURL)
+#    define CURL_EXTERN  __declspec(dllexport)
+#  else
+#    define CURL_EXTERN  __declspec(dllimport)
+#  endif
+#elif defined(BUILDING_LIBCURL) && defined(CURL_HIDDEN_SYMBOLS)
+#  define CURL_EXTERN CURL_EXTERN_SYMBOL
+#else
+#  define CURL_EXTERN
+#endif
+
+#ifndef curl_socket_typedef
+/* socket typedef */
+#if defined(CURL_WIN32) && !defined(__LWIP_OPT_H__) && !defined(LWIP_HDR_OPT_H)
+typedef SOCKET curl_socket_t;
+#define CURL_SOCKET_BAD INVALID_SOCKET
+#else
+typedef int curl_socket_t;
+#define CURL_SOCKET_BAD -1
+#endif
+#define curl_socket_typedef
+#endif /* curl_socket_typedef */
+
+/* enum for the different supported SSL backends */
+typedef enum {
+  CURLSSLBACKEND_NONE = 0,
+  CURLSSLBACKEND_OPENSSL = 1,
+  CURLSSLBACKEND_GNUTLS = 2,
+  CURLSSLBACKEND_NSS = 3,
+  CURLSSLBACKEND_OBSOLETE4 = 4,  /* Was QSOSSL. */
+  CURLSSLBACKEND_GSKIT = 5,
+  CURLSSLBACKEND_POLARSSL = 6,
+  CURLSSLBACKEND_WOLFSSL = 7,
+  CURLSSLBACKEND_SCHANNEL = 8,
+  CURLSSLBACKEND_SECURETRANSPORT = 9,
+  CURLSSLBACKEND_AXTLS = 10, /* never used since 7.63.0 */
+  CURLSSLBACKEND_MBEDTLS = 11,
+  CURLSSLBACKEND_MESALINK = 12,
+  CURLSSLBACKEND_BEARSSL = 13,
+  CURLSSLBACKEND_RUSTLS = 14
+} curl_sslbackend;
+
+/* aliases for library clones and renames */
+#define CURLSSLBACKEND_LIBRESSL CURLSSLBACKEND_OPENSSL
+#define CURLSSLBACKEND_BORINGSSL CURLSSLBACKEND_OPENSSL
+
+/* deprecated names: */
+#define CURLSSLBACKEND_CYASSL CURLSSLBACKEND_WOLFSSL
+#define CURLSSLBACKEND_DARWINSSL CURLSSLBACKEND_SECURETRANSPORT
+
+struct curl_httppost {
+  struct curl_httppost *next;       /* next entry in the list */
+  char *name;                       /* pointer to allocated name */
+  long namelength;                  /* length of name length */
+  char *contents;                   /* pointer to allocated data contents */
+  long contentslength;              /* length of contents field, see also
+                                       CURL_HTTPPOST_LARGE */
+  char *buffer;                     /* pointer to allocated buffer contents */
+  long bufferlength;                /* length of buffer field */
+  char *contenttype;                /* Content-Type */
+  struct curl_slist *contentheader; /* list of extra headers for this form */
+  struct curl_httppost *more;       /* if one field name has more than one
+                                       file, this link should link to following
+                                       files */
+  long flags;                       /* as defined below */
+
+/* specified content is a file name */
+#define CURL_HTTPPOST_FILENAME (1<<0)
+/* specified content is a file name */
+#define CURL_HTTPPOST_READFILE (1<<1)
+/* name is only stored pointer do not free in formfree */
+#define CURL_HTTPPOST_PTRNAME (1<<2)
+/* contents is only stored pointer do not free in formfree */
+#define CURL_HTTPPOST_PTRCONTENTS (1<<3)
+/* upload file from buffer */
+#define CURL_HTTPPOST_BUFFER (1<<4)
+/* upload file from pointer contents */
+#define CURL_HTTPPOST_PTRBUFFER (1<<5)
+/* upload file contents by using the regular read callback to get the data and
+   pass the given pointer as custom pointer */
+#define CURL_HTTPPOST_CALLBACK (1<<6)
+/* use size in 'contentlen', added in 7.46.0 */
+#define CURL_HTTPPOST_LARGE (1<<7)
+
+  char *showfilename;               /* The file name to show. If not set, the
+                                       actual file name will be used (if this
+                                       is a file part) */
+  void *userp;                      /* custom pointer used for
+                                       HTTPPOST_CALLBACK posts */
+  curl_off_t contentlen;            /* alternative length of contents
+                                       field. Used if CURL_HTTPPOST_LARGE is
+                                       set. Added in 7.46.0 */
+};
+
+
+/* This is a return code for the progress callback that, when returned, will
+   signal libcurl to continue executing the default progress function */
+#define CURL_PROGRESSFUNC_CONTINUE 0x10000001
+
+/* This is the CURLOPT_PROGRESSFUNCTION callback prototype. It is now
+   considered deprecated but was the only choice up until 7.31.0 */
+typedef int (*curl_progress_callback)(void *clientp,
+                                      double dltotal,
+                                      double dlnow,
+                                      double ultotal,
+                                      double ulnow);
+
+/* This is the CURLOPT_XFERINFOFUNCTION callback prototype. It was introduced
+   in 7.32.0, avoids the use of floating point numbers and provides more
+   detailed information. */
+typedef int (*curl_xferinfo_callback)(void *clientp,
+                                      curl_off_t dltotal,
+                                      curl_off_t dlnow,
+                                      curl_off_t ultotal,
+                                      curl_off_t ulnow);
+
+#ifndef CURL_MAX_READ_SIZE
+  /* The maximum receive buffer size configurable via CURLOPT_BUFFERSIZE. */
+#define CURL_MAX_READ_SIZE 524288
+#endif
+
+#ifndef CURL_MAX_WRITE_SIZE
+  /* Tests have proven that 20K is a very bad buffer size for uploads on
+     Windows, while 16K for some odd reason performed a lot better.
+     We do the ifndef check to allow this value to easier be changed at build
+     time for those who feel adventurous. The practical minimum is about
+     400 bytes since libcurl uses a buffer of this size as a scratch area
+     (unrelated to network send operations). */
+#define CURL_MAX_WRITE_SIZE 16384
+#endif
+
+#ifndef CURL_MAX_HTTP_HEADER
+/* The only reason to have a max limit for this is to avoid the risk of a bad
+   server feeding libcurl with a never-ending header that will cause reallocs
+   infinitely */
+#define CURL_MAX_HTTP_HEADER (100*1024)
+#endif
+
+/* This is a magic return code for the write callback that, when returned,
+   will signal libcurl to pause receiving on the current transfer. */
+#define CURL_WRITEFUNC_PAUSE 0x10000001
+
+typedef size_t (*curl_write_callback)(char *buffer,
+                                      size_t size,
+                                      size_t nitems,
+                                      void *outstream);
+
+/* This callback will be called when a new resolver request is made */
+typedef int (*curl_resolver_start_callback)(void *resolver_state,
+                                            void *reserved, void *userdata);
+
+/* enumeration of file types */
+typedef enum {
+  CURLFILETYPE_FILE = 0,
+  CURLFILETYPE_DIRECTORY,
+  CURLFILETYPE_SYMLINK,
+  CURLFILETYPE_DEVICE_BLOCK,
+  CURLFILETYPE_DEVICE_CHAR,
+  CURLFILETYPE_NAMEDPIPE,
+  CURLFILETYPE_SOCKET,
+  CURLFILETYPE_DOOR, /* is possible only on Sun Solaris now */
+
+  CURLFILETYPE_UNKNOWN /* should never occur */
+} curlfiletype;
+
+#define CURLFINFOFLAG_KNOWN_FILENAME    (1<<0)
+#define CURLFINFOFLAG_KNOWN_FILETYPE    (1<<1)
+#define CURLFINFOFLAG_KNOWN_TIME        (1<<2)
+#define CURLFINFOFLAG_KNOWN_PERM        (1<<3)
+#define CURLFINFOFLAG_KNOWN_UID         (1<<4)
+#define CURLFINFOFLAG_KNOWN_GID         (1<<5)
+#define CURLFINFOFLAG_KNOWN_SIZE        (1<<6)
+#define CURLFINFOFLAG_KNOWN_HLINKCOUNT  (1<<7)
+
+/* Information about a single file, used when doing FTP wildcard matching */
+struct curl_fileinfo {
+  char *filename;
+  curlfiletype filetype;
+  time_t time; /* always zero! */
+  unsigned int perm;
+  int uid;
+  int gid;
+  curl_off_t size;
+  long int hardlinks;
+
+  struct {
+    /* If some of these fields is not NULL, it is a pointer to b_data. */
+    char *time;
+    char *perm;
+    char *user;
+    char *group;
+    char *target; /* pointer to the target filename of a symlink */
+  } strings;
+
+  unsigned int flags;
+
+  /* used internally */
+  char *b_data;
+  size_t b_size;
+  size_t b_used;
+};
+
+/* return codes for CURLOPT_CHUNK_BGN_FUNCTION */
+#define CURL_CHUNK_BGN_FUNC_OK      0
+#define CURL_CHUNK_BGN_FUNC_FAIL    1 /* tell the lib to end the task */
+#define CURL_CHUNK_BGN_FUNC_SKIP    2 /* skip this chunk over */
+
+/* if splitting of data transfer is enabled, this callback is called before
+   download of an individual chunk started. Note that parameter "remains" works
+   only for FTP wildcard downloading (for now), otherwise is not used */
+typedef long (*curl_chunk_bgn_callback)(const void *transfer_info,
+                                        void *ptr,
+                                        int remains);
+
+/* return codes for CURLOPT_CHUNK_END_FUNCTION */
+#define CURL_CHUNK_END_FUNC_OK      0
+#define CURL_CHUNK_END_FUNC_FAIL    1 /* tell the lib to end the task */
+
+/* If splitting of data transfer is enabled this callback is called after
+   download of an individual chunk finished.
+   Note! After this callback was set then it have to be called FOR ALL chunks.
+   Even if downloading of this chunk was skipped in CHUNK_BGN_FUNC.
+   This is the reason why we don't need "transfer_info" parameter in this
+   callback and we are not interested in "remains" parameter too. */
+typedef long (*curl_chunk_end_callback)(void *ptr);
+
+/* return codes for FNMATCHFUNCTION */
+#define CURL_FNMATCHFUNC_MATCH    0 /* string corresponds to the pattern */
+#define CURL_FNMATCHFUNC_NOMATCH  1 /* pattern doesn't match the string */
+#define CURL_FNMATCHFUNC_FAIL     2 /* an error occurred */
+
+/* callback type for wildcard downloading pattern matching. If the
+   string matches the pattern, return CURL_FNMATCHFUNC_MATCH value, etc. */
+typedef int (*curl_fnmatch_callback)(void *ptr,
+                                     const char *pattern,
+                                     const char *string);
+
+/* These are the return codes for the seek callbacks */
+#define CURL_SEEKFUNC_OK       0
+#define CURL_SEEKFUNC_FAIL     1 /* fail the entire transfer */
+#define CURL_SEEKFUNC_CANTSEEK 2 /* tell libcurl seeking can't be done, so
+                                    libcurl might try other means instead */
+typedef int (*curl_seek_callback)(void *instream,
+                                  curl_off_t offset,
+                                  int origin); /* 'whence' */
+
+/* This is a return code for the read callback that, when returned, will
+   signal libcurl to immediately abort the current transfer. */
+#define CURL_READFUNC_ABORT 0x10000000
+/* This is a return code for the read callback that, when returned, will
+   signal libcurl to pause sending data on the current transfer. */
+#define CURL_READFUNC_PAUSE 0x10000001
+
+/* Return code for when the trailing headers' callback has terminated
+   without any errors*/
+#define CURL_TRAILERFUNC_OK 0
+/* Return code for when was an error in the trailing header's list and we
+  want to abort the request */
+#define CURL_TRAILERFUNC_ABORT 1
+
+typedef size_t (*curl_read_callback)(char *buffer,
+                                      size_t size,
+                                      size_t nitems,
+                                      void *instream);
+
+typedef int (*curl_trailer_callback)(struct curl_slist **list,
+                                      void *userdata);
+
+typedef enum {
+  CURLSOCKTYPE_IPCXN,  /* socket created for a specific IP connection */
+  CURLSOCKTYPE_ACCEPT, /* socket created by accept() call */
+  CURLSOCKTYPE_LAST    /* never use */
+} curlsocktype;
+
+/* The return code from the sockopt_callback can signal information back
+   to libcurl: */
+#define CURL_SOCKOPT_OK 0
+#define CURL_SOCKOPT_ERROR 1 /* causes libcurl to abort and return
+                                CURLE_ABORTED_BY_CALLBACK */
+#define CURL_SOCKOPT_ALREADY_CONNECTED 2
+
+typedef int (*curl_sockopt_callback)(void *clientp,
+                                     curl_socket_t curlfd,
+                                     curlsocktype purpose);
+
+struct curl_sockaddr {
+  int family;
+  int socktype;
+  int protocol;
+  unsigned int addrlen; /* addrlen was a socklen_t type before 7.18.0 but it
+                           turned really ugly and painful on the systems that
+                           lack this type */
+  struct sockaddr addr;
+};
+
+typedef curl_socket_t
+(*curl_opensocket_callback)(void *clientp,
+                            curlsocktype purpose,
+                            struct curl_sockaddr *address);
+
+typedef int
+(*curl_closesocket_callback)(void *clientp, curl_socket_t item);
+
+typedef enum {
+  CURLIOE_OK,            /* I/O operation successful */
+  CURLIOE_UNKNOWNCMD,    /* command was unknown to callback */
+  CURLIOE_FAILRESTART,   /* failed to restart the read */
+  CURLIOE_LAST           /* never use */
+} curlioerr;
+
+typedef enum {
+  CURLIOCMD_NOP,         /* no operation */
+  CURLIOCMD_RESTARTREAD, /* restart the read stream from start */
+  CURLIOCMD_LAST         /* never use */
+} curliocmd;
+
+typedef curlioerr (*curl_ioctl_callback)(CURL *handle,
+                                         int cmd,
+                                         void *clientp);
+
+#ifndef CURL_DID_MEMORY_FUNC_TYPEDEFS
+/*
+ * The following typedef's are signatures of malloc, free, realloc, strdup and
+ * calloc respectively.  Function pointers of these types can be passed to the
+ * curl_global_init_mem() function to set user defined memory management
+ * callback routines.
+ */
+typedef void *(*curl_malloc_callback)(size_t size);
+typedef void (*curl_free_callback)(void *ptr);
+typedef void *(*curl_realloc_callback)(void *ptr, size_t size);
+typedef char *(*curl_strdup_callback)(const char *str);
+typedef void *(*curl_calloc_callback)(size_t nmemb, size_t size);
+
+#define CURL_DID_MEMORY_FUNC_TYPEDEFS
+#endif
+
+/* the kind of data that is passed to information_callback*/
+typedef enum {
+  CURLINFO_TEXT = 0,
+  CURLINFO_HEADER_IN,    /* 1 */
+  CURLINFO_HEADER_OUT,   /* 2 */
+  CURLINFO_DATA_IN,      /* 3 */
+  CURLINFO_DATA_OUT,     /* 4 */
+  CURLINFO_SSL_DATA_IN,  /* 5 */
+  CURLINFO_SSL_DATA_OUT, /* 6 */
+  CURLINFO_END
+} curl_infotype;
+
+typedef int (*curl_debug_callback)
+       (CURL *handle,      /* the handle/transfer this concerns */
+        curl_infotype type, /* what kind of data */
+        char *data,        /* points to the data */
+        size_t size,       /* size of the data pointed to */
+        void *userptr);    /* whatever the user please */
+
+/* This is the CURLOPT_PREREQFUNCTION callback prototype. */
+typedef int (*curl_prereq_callback)(void *clientp,
+                                    char *conn_primary_ip,
+                                    char *conn_local_ip,
+                                    int conn_primary_port,
+                                    int conn_local_port);
+
+/* Return code for when the pre-request callback has terminated without
+   any errors */
+#define CURL_PREREQFUNC_OK 0
+/* Return code for when the pre-request callback wants to abort the
+   request */
+#define CURL_PREREQFUNC_ABORT 1
+
+/* All possible error codes from all sorts of curl functions. Future versions
+   may return other values, stay prepared.
+
+   Always add new return codes last. Never *EVER* remove any. The return
+   codes must remain the same!
+ */
+
+typedef enum {
+  CURLE_OK = 0,
+  CURLE_UNSUPPORTED_PROTOCOL,    /* 1 */
+  CURLE_FAILED_INIT,             /* 2 */
+  CURLE_URL_MALFORMAT,           /* 3 */
+  CURLE_NOT_BUILT_IN,            /* 4 - [was obsoleted in August 2007 for
+                                    7.17.0, reused in April 2011 for 7.21.5] */
+  CURLE_COULDNT_RESOLVE_PROXY,   /* 5 */
+  CURLE_COULDNT_RESOLVE_HOST,    /* 6 */
+  CURLE_COULDNT_CONNECT,         /* 7 */
+  CURLE_WEIRD_SERVER_REPLY,      /* 8 */
+  CURLE_REMOTE_ACCESS_DENIED,    /* 9 a service was denied by the server
+                                    due to lack of access - when login fails
+                                    this is not returned. */
+  CURLE_FTP_ACCEPT_FAILED,       /* 10 - [was obsoleted in April 2006 for
+                                    7.15.4, reused in Dec 2011 for 7.24.0]*/
+  CURLE_FTP_WEIRD_PASS_REPLY,    /* 11 */
+  CURLE_FTP_ACCEPT_TIMEOUT,      /* 12 - timeout occurred accepting server
+                                    [was obsoleted in August 2007 for 7.17.0,
+                                    reused in Dec 2011 for 7.24.0]*/
+  CURLE_FTP_WEIRD_PASV_REPLY,    /* 13 */
+  CURLE_FTP_WEIRD_227_FORMAT,    /* 14 */
+  CURLE_FTP_CANT_GET_HOST,       /* 15 */
+  CURLE_HTTP2,                   /* 16 - A problem in the http2 framing layer.
+                                    [was obsoleted in August 2007 for 7.17.0,
+                                    reused in July 2014 for 7.38.0] */
+  CURLE_FTP_COULDNT_SET_TYPE,    /* 17 */
+  CURLE_PARTIAL_FILE,            /* 18 */
+  CURLE_FTP_COULDNT_RETR_FILE,   /* 19 */
+  CURLE_OBSOLETE20,              /* 20 - NOT USED */
+  CURLE_QUOTE_ERROR,             /* 21 - quote command failure */
+  CURLE_HTTP_RETURNED_ERROR,     /* 22 */
+  CURLE_WRITE_ERROR,             /* 23 */
+  CURLE_OBSOLETE24,              /* 24 - NOT USED */
+  CURLE_UPLOAD_FAILED,           /* 25 - failed upload "command" */
+  CURLE_READ_ERROR,              /* 26 - couldn't open/read from file */
+  CURLE_OUT_OF_MEMORY,           /* 27 */
+  CURLE_OPERATION_TIMEDOUT,      /* 28 - the timeout time was reached */
+  CURLE_OBSOLETE29,              /* 29 - NOT USED */
+  CURLE_FTP_PORT_FAILED,         /* 30 - FTP PORT operation failed */
+  CURLE_FTP_COULDNT_USE_REST,    /* 31 - the REST command failed */
+  CURLE_OBSOLETE32,              /* 32 - NOT USED */
+  CURLE_RANGE_ERROR,             /* 33 - RANGE "command" didn't work */
+  CURLE_HTTP_POST_ERROR,         /* 34 */
+  CURLE_SSL_CONNECT_ERROR,       /* 35 - wrong when connecting with SSL */
+  CURLE_BAD_DOWNLOAD_RESUME,     /* 36 - couldn't resume download */
+  CURLE_FILE_COULDNT_READ_FILE,  /* 37 */
+  CURLE_LDAP_CANNOT_BIND,        /* 38 */
+  CURLE_LDAP_SEARCH_FAILED,      /* 39 */
+  CURLE_OBSOLETE40,              /* 40 - NOT USED */
+  CURLE_FUNCTION_NOT_FOUND,      /* 41 - NOT USED starting with 7.53.0 */
+  CURLE_ABORTED_BY_CALLBACK,     /* 42 */
+  CURLE_BAD_FUNCTION_ARGUMENT,   /* 43 */
+  CURLE_OBSOLETE44,              /* 44 - NOT USED */
+  CURLE_INTERFACE_FAILED,        /* 45 - CURLOPT_INTERFACE failed */
+  CURLE_OBSOLETE46,              /* 46 - NOT USED */
+  CURLE_TOO_MANY_REDIRECTS,      /* 47 - catch endless re-direct loops */
+  CURLE_UNKNOWN_OPTION,          /* 48 - User specified an unknown option */
+  CURLE_SETOPT_OPTION_SYNTAX,    /* 49 - Malformed setopt option */
+  CURLE_OBSOLETE50,              /* 50 - NOT USED */
+  CURLE_OBSOLETE51,              /* 51 - NOT USED */
+  CURLE_GOT_NOTHING,             /* 52 - when this is a specific error */
+  CURLE_SSL_ENGINE_NOTFOUND,     /* 53 - SSL crypto engine not found */
+  CURLE_SSL_ENGINE_SETFAILED,    /* 54 - can not set SSL crypto engine as
+                                    default */
+  CURLE_SEND_ERROR,              /* 55 - failed sending network data */
+  CURLE_RECV_ERROR,              /* 56 - failure in receiving network data */
+  CURLE_OBSOLETE57,              /* 57 - NOT IN USE */
+  CURLE_SSL_CERTPROBLEM,         /* 58 - problem with the local certificate */
+  CURLE_SSL_CIPHER,              /* 59 - couldn't use specified cipher */
+  CURLE_PEER_FAILED_VERIFICATION, /* 60 - peer's certificate or fingerprint
+                                     wasn't verified fine */
+  CURLE_BAD_CONTENT_ENCODING,    /* 61 - Unrecognized/bad encoding */
+  CURLE_OBSOLETE62,              /* 62 - NOT IN USE since 7.82.0 */
+  CURLE_FILESIZE_EXCEEDED,       /* 63 - Maximum file size exceeded */
+  CURLE_USE_SSL_FAILED,          /* 64 - Requested FTP SSL level failed */
+  CURLE_SEND_FAIL_REWIND,        /* 65 - Sending the data requires a rewind
+                                    that failed */
+  CURLE_SSL_ENGINE_INITFAILED,   /* 66 - failed to initialise ENGINE */
+  CURLE_LOGIN_DENIED,            /* 67 - user, password or similar was not
+                                    accepted and we failed to login */
+  CURLE_TFTP_NOTFOUND,           /* 68 - file not found on server */
+  CURLE_TFTP_PERM,               /* 69 - permission problem on server */
+  CURLE_REMOTE_DISK_FULL,        /* 70 - out of disk space on server */
+  CURLE_TFTP_ILLEGAL,            /* 71 - Illegal TFTP operation */
+  CURLE_TFTP_UNKNOWNID,          /* 72 - Unknown transfer ID */
+  CURLE_REMOTE_FILE_EXISTS,      /* 73 - File already exists */
+  CURLE_TFTP_NOSUCHUSER,         /* 74 - No such user */
+  CURLE_OBSOLETE75,              /* 75 - NOT IN USE since 7.82.0 */
+  CURLE_OBSOLETE76,              /* 76 - NOT IN USE since 7.82.0 */
+  CURLE_SSL_CACERT_BADFILE,      /* 77 - could not load CACERT file, missing
+                                    or wrong format */
+  CURLE_REMOTE_FILE_NOT_FOUND,   /* 78 - remote file not found */
+  CURLE_SSH,                     /* 79 - error from the SSH layer, somewhat
+                                    generic so the error message will be of
+                                    interest when this has happened */
+
+  CURLE_SSL_SHUTDOWN_FAILED,     /* 80 - Failed to shut down the SSL
+                                    connection */
+  CURLE_AGAIN,                   /* 81 - socket is not ready for send/recv,
+                                    wait till it's ready and try again (Added
+                                    in 7.18.2) */
+  CURLE_SSL_CRL_BADFILE,         /* 82 - could not load CRL file, missing or
+                                    wrong format (Added in 7.19.0) */
+  CURLE_SSL_ISSUER_ERROR,        /* 83 - Issuer check failed.  (Added in
+                                    7.19.0) */
+  CURLE_FTP_PRET_FAILED,         /* 84 - a PRET command failed */
+  CURLE_RTSP_CSEQ_ERROR,         /* 85 - mismatch of RTSP CSeq numbers */
+  CURLE_RTSP_SESSION_ERROR,      /* 86 - mismatch of RTSP Session Ids */
+  CURLE_FTP_BAD_FILE_LIST,       /* 87 - unable to parse FTP file list */
+  CURLE_CHUNK_FAILED,            /* 88 - chunk callback reported error */
+  CURLE_NO_CONNECTION_AVAILABLE, /* 89 - No connection available, the
+                                    session will be queued */
+  CURLE_SSL_PINNEDPUBKEYNOTMATCH, /* 90 - specified pinned public key did not
+                                     match */
+  CURLE_SSL_INVALIDCERTSTATUS,   /* 91 - invalid certificate status */
+  CURLE_HTTP2_STREAM,            /* 92 - stream error in HTTP/2 framing layer
+                                    */
+  CURLE_RECURSIVE_API_CALL,      /* 93 - an api function was called from
+                                    inside a callback */
+  CURLE_AUTH_ERROR,              /* 94 - an authentication function returned an
+                                    error */
+  CURLE_HTTP3,                   /* 95 - An HTTP/3 layer problem */
+  CURLE_QUIC_CONNECT_ERROR,      /* 96 - QUIC connection error */
+  CURLE_PROXY,                   /* 97 - proxy handshake error */
+  CURLE_SSL_CLIENTCERT,          /* 98 - client-side certificate required */
+  CURLE_UNRECOVERABLE_POLL,      /* 99 - poll/select returned fatal error */
+  CURL_LAST /* never use! */
+} CURLcode;
+
+#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
+                          the obsolete stuff removed! */
+
+/* Previously obsolete error code re-used in 7.38.0 */
+#define CURLE_OBSOLETE16 CURLE_HTTP2
+
+/* Previously obsolete error codes re-used in 7.24.0 */
+#define CURLE_OBSOLETE10 CURLE_FTP_ACCEPT_FAILED
+#define CURLE_OBSOLETE12 CURLE_FTP_ACCEPT_TIMEOUT
+
+/*  compatibility with older names */
+#define CURLOPT_ENCODING CURLOPT_ACCEPT_ENCODING
+#define CURLE_FTP_WEIRD_SERVER_REPLY CURLE_WEIRD_SERVER_REPLY
+
+/* The following were added in 7.62.0 */
+#define CURLE_SSL_CACERT CURLE_PEER_FAILED_VERIFICATION
+
+/* The following were added in 7.21.5, April 2011 */
+#define CURLE_UNKNOWN_TELNET_OPTION CURLE_UNKNOWN_OPTION
+
+/* Added for 7.78.0 */
+#define CURLE_TELNET_OPTION_SYNTAX CURLE_SETOPT_OPTION_SYNTAX
+
+/* The following were added in 7.17.1 */
+/* These are scheduled to disappear by 2009 */
+#define CURLE_SSL_PEER_CERTIFICATE CURLE_PEER_FAILED_VERIFICATION
+
+/* The following were added in 7.17.0 */
+/* These are scheduled to disappear by 2009 */
+#define CURLE_OBSOLETE CURLE_OBSOLETE50 /* no one should be using this! */
+#define CURLE_BAD_PASSWORD_ENTERED CURLE_OBSOLETE46
+#define CURLE_BAD_CALLING_ORDER CURLE_OBSOLETE44
+#define CURLE_FTP_USER_PASSWORD_INCORRECT CURLE_OBSOLETE10
+#define CURLE_FTP_CANT_RECONNECT CURLE_OBSOLETE16
+#define CURLE_FTP_COULDNT_GET_SIZE CURLE_OBSOLETE32
+#define CURLE_FTP_COULDNT_SET_ASCII CURLE_OBSOLETE29
+#define CURLE_FTP_WEIRD_USER_REPLY CURLE_OBSOLETE12
+#define CURLE_FTP_WRITE_ERROR CURLE_OBSOLETE20
+#define CURLE_LIBRARY_NOT_FOUND CURLE_OBSOLETE40
+#define CURLE_MALFORMAT_USER CURLE_OBSOLETE24
+#define CURLE_SHARE_IN_USE CURLE_OBSOLETE57
+#define CURLE_URL_MALFORMAT_USER CURLE_NOT_BUILT_IN
+
+#define CURLE_FTP_ACCESS_DENIED CURLE_REMOTE_ACCESS_DENIED
+#define CURLE_FTP_COULDNT_SET_BINARY CURLE_FTP_COULDNT_SET_TYPE
+#define CURLE_FTP_QUOTE_ERROR CURLE_QUOTE_ERROR
+#define CURLE_TFTP_DISKFULL CURLE_REMOTE_DISK_FULL
+#define CURLE_TFTP_EXISTS CURLE_REMOTE_FILE_EXISTS
+#define CURLE_HTTP_RANGE_ERROR CURLE_RANGE_ERROR
+#define CURLE_FTP_SSL_FAILED CURLE_USE_SSL_FAILED
+
+/* The following were added earlier */
+
+#define CURLE_OPERATION_TIMEOUTED CURLE_OPERATION_TIMEDOUT
+#define CURLE_HTTP_NOT_FOUND CURLE_HTTP_RETURNED_ERROR
+#define CURLE_HTTP_PORT_FAILED CURLE_INTERFACE_FAILED
+#define CURLE_FTP_COULDNT_STOR_FILE CURLE_UPLOAD_FAILED
+#define CURLE_FTP_PARTIAL_FILE CURLE_PARTIAL_FILE
+#define CURLE_FTP_BAD_DOWNLOAD_RESUME CURLE_BAD_DOWNLOAD_RESUME
+#define CURLE_LDAP_INVALID_URL CURLE_OBSOLETE62
+#define CURLE_CONV_REQD CURLE_OBSOLETE76
+#define CURLE_CONV_FAILED CURLE_OBSOLETE75
+
+/* This was the error code 50 in 7.7.3 and a few earlier versions, this
+   is no longer used by libcurl but is instead #defined here only to not
+   make programs break */
+#define CURLE_ALREADY_COMPLETE 99999
+
+/* Provide defines for really old option names */
+#define CURLOPT_FILE CURLOPT_WRITEDATA /* name changed in 7.9.7 */
+#define CURLOPT_INFILE CURLOPT_READDATA /* name changed in 7.9.7 */
+#define CURLOPT_WRITEHEADER CURLOPT_HEADERDATA
+
+/* Since long deprecated options with no code in the lib that does anything
+   with them. */
+#define CURLOPT_WRITEINFO CURLOPT_OBSOLETE40
+#define CURLOPT_CLOSEPOLICY CURLOPT_OBSOLETE72
+
+#endif /*!CURL_NO_OLDIES*/
+
+/*
+ * Proxy error codes. Returned in CURLINFO_PROXY_ERROR if CURLE_PROXY was
+ * return for the transfers.
+ */
+typedef enum {
+  CURLPX_OK,
+  CURLPX_BAD_ADDRESS_TYPE,
+  CURLPX_BAD_VERSION,
+  CURLPX_CLOSED,
+  CURLPX_GSSAPI,
+  CURLPX_GSSAPI_PERMSG,
+  CURLPX_GSSAPI_PROTECTION,
+  CURLPX_IDENTD,
+  CURLPX_IDENTD_DIFFER,
+  CURLPX_LONG_HOSTNAME,
+  CURLPX_LONG_PASSWD,
+  CURLPX_LONG_USER,
+  CURLPX_NO_AUTH,
+  CURLPX_RECV_ADDRESS,
+  CURLPX_RECV_AUTH,
+  CURLPX_RECV_CONNECT,
+  CURLPX_RECV_REQACK,
+  CURLPX_REPLY_ADDRESS_TYPE_NOT_SUPPORTED,
+  CURLPX_REPLY_COMMAND_NOT_SUPPORTED,
+  CURLPX_REPLY_CONNECTION_REFUSED,
+  CURLPX_REPLY_GENERAL_SERVER_FAILURE,
+  CURLPX_REPLY_HOST_UNREACHABLE,
+  CURLPX_REPLY_NETWORK_UNREACHABLE,
+  CURLPX_REPLY_NOT_ALLOWED,
+  CURLPX_REPLY_TTL_EXPIRED,
+  CURLPX_REPLY_UNASSIGNED,
+  CURLPX_REQUEST_FAILED,
+  CURLPX_RESOLVE_HOST,
+  CURLPX_SEND_AUTH,
+  CURLPX_SEND_CONNECT,
+  CURLPX_SEND_REQUEST,
+  CURLPX_UNKNOWN_FAIL,
+  CURLPX_UNKNOWN_MODE,
+  CURLPX_USER_REJECTED,
+  CURLPX_LAST /* never use */
+} CURLproxycode;
+
+/* This prototype applies to all conversion callbacks */
+typedef CURLcode (*curl_conv_callback)(char *buffer, size_t length);
+
+typedef CURLcode (*curl_ssl_ctx_callback)(CURL *curl,    /* easy handle */
+                                          void *ssl_ctx, /* actually an OpenSSL
+                                                            or WolfSSL SSL_CTX,
+                                                            or an mbedTLS
+                                                          mbedtls_ssl_config */
+                                          void *userptr);
+
+typedef enum {
+  CURLPROXY_HTTP = 0,   /* added in 7.10, new in 7.19.4 default is to use
+                           CONNECT HTTP/1.1 */
+  CURLPROXY_HTTP_1_0 = 1,   /* added in 7.19.4, force to use CONNECT
+                               HTTP/1.0  */
+  CURLPROXY_HTTPS = 2, /* added in 7.52.0 */
+  CURLPROXY_SOCKS4 = 4, /* support added in 7.15.2, enum existed already
+                           in 7.10 */
+  CURLPROXY_SOCKS5 = 5, /* added in 7.10 */
+  CURLPROXY_SOCKS4A = 6, /* added in 7.18.0 */
+  CURLPROXY_SOCKS5_HOSTNAME = 7 /* Use the SOCKS5 protocol but pass along the
+                                   host name rather than the IP address. added
+                                   in 7.18.0 */
+} curl_proxytype;  /* this enum was added in 7.10 */
+
+/*
+ * Bitmasks for CURLOPT_HTTPAUTH and CURLOPT_PROXYAUTH options:
+ *
+ * CURLAUTH_NONE         - No HTTP authentication
+ * CURLAUTH_BASIC        - HTTP Basic authentication (default)
+ * CURLAUTH_DIGEST       - HTTP Digest authentication
+ * CURLAUTH_NEGOTIATE    - HTTP Negotiate (SPNEGO) authentication
+ * CURLAUTH_GSSNEGOTIATE - Alias for CURLAUTH_NEGOTIATE (deprecated)
+ * CURLAUTH_NTLM         - HTTP NTLM authentication
+ * CURLAUTH_DIGEST_IE    - HTTP Digest authentication with IE flavour
+ * CURLAUTH_NTLM_WB      - HTTP NTLM authentication delegated to winbind helper
+ * CURLAUTH_BEARER       - HTTP Bearer token authentication
+ * CURLAUTH_ONLY         - Use together with a single other type to force no
+ *                         authentication or just that single type
+ * CURLAUTH_ANY          - All fine types set
+ * CURLAUTH_ANYSAFE      - All fine types except Basic
+ */
+
+#define CURLAUTH_NONE         ((unsigned long)0)
+#define CURLAUTH_BASIC        (((unsigned long)1)<<0)
+#define CURLAUTH_DIGEST       (((unsigned long)1)<<1)
+#define CURLAUTH_NEGOTIATE    (((unsigned long)1)<<2)
+/* Deprecated since the advent of CURLAUTH_NEGOTIATE */
+#define CURLAUTH_GSSNEGOTIATE CURLAUTH_NEGOTIATE
+/* Used for CURLOPT_SOCKS5_AUTH to stay terminologically correct */
+#define CURLAUTH_GSSAPI CURLAUTH_NEGOTIATE
+#define CURLAUTH_NTLM         (((unsigned long)1)<<3)
+#define CURLAUTH_DIGEST_IE    (((unsigned long)1)<<4)
+#define CURLAUTH_NTLM_WB      (((unsigned long)1)<<5)
+#define CURLAUTH_BEARER       (((unsigned long)1)<<6)
+#define CURLAUTH_AWS_SIGV4    (((unsigned long)1)<<7)
+#define CURLAUTH_ONLY         (((unsigned long)1)<<31)
+#define CURLAUTH_ANY          (~CURLAUTH_DIGEST_IE)
+#define CURLAUTH_ANYSAFE      (~(CURLAUTH_BASIC|CURLAUTH_DIGEST_IE))
+
+#define CURLSSH_AUTH_ANY       ~0     /* all types supported by the server */
+#define CURLSSH_AUTH_NONE      0      /* none allowed, silly but complete */
+#define CURLSSH_AUTH_PUBLICKEY (1<<0) /* public/private key files */
+#define CURLSSH_AUTH_PASSWORD  (1<<1) /* password */
+#define CURLSSH_AUTH_HOST      (1<<2) /* host key files */
+#define CURLSSH_AUTH_KEYBOARD  (1<<3) /* keyboard interactive */
+#define CURLSSH_AUTH_AGENT     (1<<4) /* agent (ssh-agent, pageant...) */
+#define CURLSSH_AUTH_GSSAPI    (1<<5) /* gssapi (kerberos, ...) */
+#define CURLSSH_AUTH_DEFAULT CURLSSH_AUTH_ANY
+
+#define CURLGSSAPI_DELEGATION_NONE        0      /* no delegation (default) */
+#define CURLGSSAPI_DELEGATION_POLICY_FLAG (1<<0) /* if permitted by policy */
+#define CURLGSSAPI_DELEGATION_FLAG        (1<<1) /* delegate always */
+
+#define CURL_ERROR_SIZE 256
+
+enum curl_khtype {
+  CURLKHTYPE_UNKNOWN,
+  CURLKHTYPE_RSA1,
+  CURLKHTYPE_RSA,
+  CURLKHTYPE_DSS,
+  CURLKHTYPE_ECDSA,
+  CURLKHTYPE_ED25519
+};
+
+struct curl_khkey {
+  const char *key; /* points to a null-terminated string encoded with base64
+                      if len is zero, otherwise to the "raw" data */
+  size_t len;
+  enum curl_khtype keytype;
+};
+
+/* this is the set of return values expected from the curl_sshkeycallback
+   callback */
+enum curl_khstat {
+  CURLKHSTAT_FINE_ADD_TO_FILE,
+  CURLKHSTAT_FINE,
+  CURLKHSTAT_REJECT, /* reject the connection, return an error */
+  CURLKHSTAT_DEFER,  /* do not accept it, but we can't answer right now.
+                        Causes a CURLE_PEER_FAILED_VERIFICATION error but the
+                        connection will be left intact etc */
+  CURLKHSTAT_FINE_REPLACE, /* accept and replace the wrong key*/
+  CURLKHSTAT_LAST    /* not for use, only a marker for last-in-list */
+};
+
+/* this is the set of status codes pass in to the callback */
+enum curl_khmatch {
+  CURLKHMATCH_OK,       /* match */
+  CURLKHMATCH_MISMATCH, /* host found, key mismatch! */
+  CURLKHMATCH_MISSING,  /* no matching host/key found */
+  CURLKHMATCH_LAST      /* not for use, only a marker for last-in-list */
+};
+
+typedef int
+  (*curl_sshkeycallback) (CURL *easy,     /* easy handle */
+                          const struct curl_khkey *knownkey, /* known */
+                          const struct curl_khkey *foundkey, /* found */
+                          enum curl_khmatch, /* libcurl's view on the keys */
+                          void *clientp); /* custom pointer passed with */
+                                          /* CURLOPT_SSH_KEYDATA */
+
+typedef int
+  (*curl_sshhostkeycallback) (void *clientp,/* custom pointer passed*/
+                                            /* with CURLOPT_SSH_HOSTKEYDATA */
+                          int keytype, /* CURLKHTYPE */
+                          const char *key, /*hostkey to check*/
+                          size_t keylen); /*length of the key*/
+                          /*return CURLE_OK to accept*/
+                          /*or something else to refuse*/
+
+
+/* parameter for the CURLOPT_USE_SSL option */
+typedef enum {
+  CURLUSESSL_NONE,    /* do not attempt to use SSL */
+  CURLUSESSL_TRY,     /* try using SSL, proceed anyway otherwise */
+  CURLUSESSL_CONTROL, /* SSL for the control connection or fail */
+  CURLUSESSL_ALL,     /* SSL for all communication or fail */
+  CURLUSESSL_LAST     /* not an option, never use */
+} curl_usessl;
+
+/* Definition of bits for the CURLOPT_SSL_OPTIONS argument: */
+
+/* - ALLOW_BEAST tells libcurl to allow the BEAST SSL vulnerability in the
+   name of improving interoperability with older servers. Some SSL libraries
+   have introduced work-arounds for this flaw but those work-arounds sometimes
+   make the SSL communication fail. To regain functionality with those broken
+   servers, a user can this way allow the vulnerability back. */
+#define CURLSSLOPT_ALLOW_BEAST (1<<0)
+
+/* - NO_REVOKE tells libcurl to disable certificate revocation checks for those
+   SSL backends where such behavior is present. */
+#define CURLSSLOPT_NO_REVOKE (1<<1)
+
+/* - NO_PARTIALCHAIN tells libcurl to *NOT* accept a partial certificate chain
+   if possible. The OpenSSL backend has this ability. */
+#define CURLSSLOPT_NO_PARTIALCHAIN (1<<2)
+
+/* - REVOKE_BEST_EFFORT tells libcurl to ignore certificate revocation offline
+   checks and ignore missing revocation list for those SSL backends where such
+   behavior is present. */
+#define CURLSSLOPT_REVOKE_BEST_EFFORT (1<<3)
+
+/* - CURLSSLOPT_NATIVE_CA tells libcurl to use standard certificate store of
+   operating system. Currently implemented under MS-Windows. */
+#define CURLSSLOPT_NATIVE_CA (1<<4)
+
+/* - CURLSSLOPT_AUTO_CLIENT_CERT tells libcurl to automatically locate and use
+   a client certificate for authentication. (Schannel) */
+#define CURLSSLOPT_AUTO_CLIENT_CERT (1<<5)
+
+/* The default connection attempt delay in milliseconds for happy eyeballs.
+   CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS.3 and happy-eyeballs-timeout-ms.d document
+   this value, keep them in sync. */
+#define CURL_HET_DEFAULT 200L
+
+/* The default connection upkeep interval in milliseconds. */
+#define CURL_UPKEEP_INTERVAL_DEFAULT 60000L
+
+#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
+                          the obsolete stuff removed! */
+
+/* Backwards compatibility with older names */
+/* These are scheduled to disappear by 2009 */
+
+#define CURLFTPSSL_NONE CURLUSESSL_NONE
+#define CURLFTPSSL_TRY CURLUSESSL_TRY
+#define CURLFTPSSL_CONTROL CURLUSESSL_CONTROL
+#define CURLFTPSSL_ALL CURLUSESSL_ALL
+#define CURLFTPSSL_LAST CURLUSESSL_LAST
+#define curl_ftpssl curl_usessl
+#endif /*!CURL_NO_OLDIES*/
+
+/* parameter for the CURLOPT_FTP_SSL_CCC option */
+typedef enum {
+  CURLFTPSSL_CCC_NONE,    /* do not send CCC */
+  CURLFTPSSL_CCC_PASSIVE, /* Let the server initiate the shutdown */
+  CURLFTPSSL_CCC_ACTIVE,  /* Initiate the shutdown */
+  CURLFTPSSL_CCC_LAST     /* not an option, never use */
+} curl_ftpccc;
+
+/* parameter for the CURLOPT_FTPSSLAUTH option */
+typedef enum {
+  CURLFTPAUTH_DEFAULT, /* let libcurl decide */
+  CURLFTPAUTH_SSL,     /* use "AUTH SSL" */
+  CURLFTPAUTH_TLS,     /* use "AUTH TLS" */
+  CURLFTPAUTH_LAST /* not an option, never use */
+} curl_ftpauth;
+
+/* parameter for the CURLOPT_FTP_CREATE_MISSING_DIRS option */
+typedef enum {
+  CURLFTP_CREATE_DIR_NONE,  /* do NOT create missing dirs! */
+  CURLFTP_CREATE_DIR,       /* (FTP/SFTP) if CWD fails, try MKD and then CWD
+                               again if MKD succeeded, for SFTP this does
+                               similar magic */
+  CURLFTP_CREATE_DIR_RETRY, /* (FTP only) if CWD fails, try MKD and then CWD
+                               again even if MKD failed! */
+  CURLFTP_CREATE_DIR_LAST   /* not an option, never use */
+} curl_ftpcreatedir;
+
+/* parameter for the CURLOPT_FTP_FILEMETHOD option */
+typedef enum {
+  CURLFTPMETHOD_DEFAULT,   /* let libcurl pick */
+  CURLFTPMETHOD_MULTICWD,  /* single CWD operation for each path part */
+  CURLFTPMETHOD_NOCWD,     /* no CWD at all */
+  CURLFTPMETHOD_SINGLECWD, /* one CWD to full dir, then work on file */
+  CURLFTPMETHOD_LAST       /* not an option, never use */
+} curl_ftpmethod;
+
+/* bitmask defines for CURLOPT_HEADEROPT */
+#define CURLHEADER_UNIFIED  0
+#define CURLHEADER_SEPARATE (1<<0)
+
+/* CURLALTSVC_* are bits for the CURLOPT_ALTSVC_CTRL option */
+#define CURLALTSVC_READONLYFILE (1<<2)
+#define CURLALTSVC_H1           (1<<3)
+#define CURLALTSVC_H2           (1<<4)
+#define CURLALTSVC_H3           (1<<5)
+
+
+struct curl_hstsentry {
+  char *name;
+  size_t namelen;
+  unsigned int includeSubDomains:1;
+  char expire[18]; /* YYYYMMDD HH:MM:SS [null-terminated] */
+};
+
+struct curl_index {
+  size_t index; /* the provided entry's "index" or count */
+  size_t total; /* total number of entries to save */
+};
+
+typedef enum {
+  CURLSTS_OK,
+  CURLSTS_DONE,
+  CURLSTS_FAIL
+} CURLSTScode;
+
+typedef CURLSTScode (*curl_hstsread_callback)(CURL *easy,
+                                              struct curl_hstsentry *e,
+                                              void *userp);
+typedef CURLSTScode (*curl_hstswrite_callback)(CURL *easy,
+                                               struct curl_hstsentry *e,
+                                               struct curl_index *i,
+                                               void *userp);
+
+/* CURLHSTS_* are bits for the CURLOPT_HSTS option */
+#define CURLHSTS_ENABLE       (long)(1<<0)
+#define CURLHSTS_READONLYFILE (long)(1<<1)
+
+/* The CURLPROTO_ defines below are for the **deprecated** CURLOPT_*PROTOCOLS
+   options. Do not use. */
+#define CURLPROTO_HTTP   (1<<0)
+#define CURLPROTO_HTTPS  (1<<1)
+#define CURLPROTO_FTP    (1<<2)
+#define CURLPROTO_FTPS   (1<<3)
+#define CURLPROTO_SCP    (1<<4)
+#define CURLPROTO_SFTP   (1<<5)
+#define CURLPROTO_TELNET (1<<6)
+#define CURLPROTO_LDAP   (1<<7)
+#define CURLPROTO_LDAPS  (1<<8)
+#define CURLPROTO_DICT   (1<<9)
+#define CURLPROTO_FILE   (1<<10)
+#define CURLPROTO_TFTP   (1<<11)
+#define CURLPROTO_IMAP   (1<<12)
+#define CURLPROTO_IMAPS  (1<<13)
+#define CURLPROTO_POP3   (1<<14)
+#define CURLPROTO_POP3S  (1<<15)
+#define CURLPROTO_SMTP   (1<<16)
+#define CURLPROTO_SMTPS  (1<<17)
+#define CURLPROTO_RTSP   (1<<18)
+#define CURLPROTO_RTMP   (1<<19)
+#define CURLPROTO_RTMPT  (1<<20)
+#define CURLPROTO_RTMPE  (1<<21)
+#define CURLPROTO_RTMPTE (1<<22)
+#define CURLPROTO_RTMPS  (1<<23)
+#define CURLPROTO_RTMPTS (1<<24)
+#define CURLPROTO_GOPHER (1<<25)
+#define CURLPROTO_SMB    (1<<26)
+#define CURLPROTO_SMBS   (1<<27)
+#define CURLPROTO_MQTT   (1<<28)
+#define CURLPROTO_GOPHERS (1<<29)
+#define CURLPROTO_ALL    (~0) /* enable everything */
+
+/* long may be 32 or 64 bits, but we should never depend on anything else
+   but 32 */
+#define CURLOPTTYPE_LONG          0
+#define CURLOPTTYPE_OBJECTPOINT   10000
+#define CURLOPTTYPE_FUNCTIONPOINT 20000
+#define CURLOPTTYPE_OFF_T         30000
+#define CURLOPTTYPE_BLOB          40000
+
+/* *STRINGPOINT is an alias for OBJECTPOINT to allow tools to extract the
+   string options from the header file */
+
+
+#define CURLOPT(na,t,nu) na = t + nu
+
+/* CURLOPT aliases that make no run-time difference */
+
+/* 'char *' argument to a string with a trailing zero */
+#define CURLOPTTYPE_STRINGPOINT CURLOPTTYPE_OBJECTPOINT
+
+/* 'struct curl_slist *' argument */
+#define CURLOPTTYPE_SLISTPOINT  CURLOPTTYPE_OBJECTPOINT
+
+/* 'void *' argument passed untouched to callback */
+#define CURLOPTTYPE_CBPOINT     CURLOPTTYPE_OBJECTPOINT
+
+/* 'long' argument with a set of values/bitmask */
+#define CURLOPTTYPE_VALUES      CURLOPTTYPE_LONG
+
+/*
+ * All CURLOPT_* values.
+ */
+
+typedef enum {
+  /* This is the FILE * or void * the regular output should be written to. */
+  CURLOPT(CURLOPT_WRITEDATA, CURLOPTTYPE_CBPOINT, 1),
+
+  /* The full URL to get/put */
+  CURLOPT(CURLOPT_URL, CURLOPTTYPE_STRINGPOINT, 2),
+
+  /* Port number to connect to, if other than default. */
+  CURLOPT(CURLOPT_PORT, CURLOPTTYPE_LONG, 3),
+
+  /* Name of proxy to use. */
+  CURLOPT(CURLOPT_PROXY, CURLOPTTYPE_STRINGPOINT, 4),
+
+  /* "user:password;options" to use when fetching. */
+  CURLOPT(CURLOPT_USERPWD, CURLOPTTYPE_STRINGPOINT, 5),
+
+  /* "user:password" to use with proxy. */
+  CURLOPT(CURLOPT_PROXYUSERPWD, CURLOPTTYPE_STRINGPOINT, 6),
+
+  /* Range to get, specified as an ASCII string. */
+  CURLOPT(CURLOPT_RANGE, CURLOPTTYPE_STRINGPOINT, 7),
+
+  /* not used */
+
+  /* Specified file stream to upload from (use as input): */
+  CURLOPT(CURLOPT_READDATA, CURLOPTTYPE_CBPOINT, 9),
+
+  /* Buffer to receive error messages in, must be at least CURL_ERROR_SIZE
+   * bytes big. */
+  CURLOPT(CURLOPT_ERRORBUFFER, CURLOPTTYPE_OBJECTPOINT, 10),
+
+  /* Function that will be called to store the output (instead of fwrite). The
+   * parameters will use fwrite() syntax, make sure to follow them. */
+  CURLOPT(CURLOPT_WRITEFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 11),
+
+  /* Function that will be called to read the input (instead of fread). The
+   * parameters will use fread() syntax, make sure to follow them. */
+  CURLOPT(CURLOPT_READFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 12),
+
+  /* Time-out the read operation after this amount of seconds */
+  CURLOPT(CURLOPT_TIMEOUT, CURLOPTTYPE_LONG, 13),
+
+  /* If the CURLOPT_INFILE is used, this can be used to inform libcurl about
+   * how large the file being sent really is. That allows better error
+   * checking and better verifies that the upload was successful. -1 means
+   * unknown size.
+   *
+   * For large file support, there is also a _LARGE version of the key
+   * which takes an off_t type, allowing platforms with larger off_t
+   * sizes to handle larger files.  See below for INFILESIZE_LARGE.
+   */
+  CURLOPT(CURLOPT_INFILESIZE, CURLOPTTYPE_LONG, 14),
+
+  /* POST static input fields. */
+  CURLOPT(CURLOPT_POSTFIELDS, CURLOPTTYPE_OBJECTPOINT, 15),
+
+  /* Set the referrer page (needed by some CGIs) */
+  CURLOPT(CURLOPT_REFERER, CURLOPTTYPE_STRINGPOINT, 16),
+
+  /* Set the FTP PORT string (interface name, named or numerical IP address)
+     Use i.e '-' to use default address. */
+  CURLOPT(CURLOPT_FTPPORT, CURLOPTTYPE_STRINGPOINT, 17),
+
+  /* Set the User-Agent string (examined by some CGIs) */
+  CURLOPT(CURLOPT_USERAGENT, CURLOPTTYPE_STRINGPOINT, 18),
+
+  /* If the download receives less than "low speed limit" bytes/second
+   * during "low speed time" seconds, the operations is aborted.
+   * You could i.e if you have a pretty high speed connection, abort if
+   * it is less than 2000 bytes/sec during 20 seconds.
+   */
+
+  /* Set the "low speed limit" */
+  CURLOPT(CURLOPT_LOW_SPEED_LIMIT, CURLOPTTYPE_LONG, 19),
+
+  /* Set the "low speed time" */
+  CURLOPT(CURLOPT_LOW_SPEED_TIME, CURLOPTTYPE_LONG, 20),
+
+  /* Set the continuation offset.
+   *
+   * Note there is also a _LARGE version of this key which uses
+   * off_t types, allowing for large file offsets on platforms which
+   * use larger-than-32-bit off_t's.  Look below for RESUME_FROM_LARGE.
+   */
+  CURLOPT(CURLOPT_RESUME_FROM, CURLOPTTYPE_LONG, 21),
+
+  /* Set cookie in request: */
+  CURLOPT(CURLOPT_COOKIE, CURLOPTTYPE_STRINGPOINT, 22),
+
+  /* This points to a linked list of headers, struct curl_slist kind. This
+     list is also used for RTSP (in spite of its name) */
+  CURLOPT(CURLOPT_HTTPHEADER, CURLOPTTYPE_SLISTPOINT, 23),
+
+  /* This points to a linked list of post entries, struct curl_httppost */
+  CURLOPT(CURLOPT_HTTPPOST, CURLOPTTYPE_OBJECTPOINT, 24),
+
+  /* name of the file keeping your private SSL-certificate */
+  CURLOPT(CURLOPT_SSLCERT, CURLOPTTYPE_STRINGPOINT, 25),
+
+  /* password for the SSL or SSH private key */
+  CURLOPT(CURLOPT_KEYPASSWD, CURLOPTTYPE_STRINGPOINT, 26),
+
+  /* send TYPE parameter? */
+  CURLOPT(CURLOPT_CRLF, CURLOPTTYPE_LONG, 27),
+
+  /* send linked-list of QUOTE commands */
+  CURLOPT(CURLOPT_QUOTE, CURLOPTTYPE_SLISTPOINT, 28),
+
+  /* send FILE * or void * to store headers to, if you use a callback it
+     is simply passed to the callback unmodified */
+  CURLOPT(CURLOPT_HEADERDATA, CURLOPTTYPE_CBPOINT, 29),
+
+  /* point to a file to read the initial cookies from, also enables
+     "cookie awareness" */
+  CURLOPT(CURLOPT_COOKIEFILE, CURLOPTTYPE_STRINGPOINT, 31),
+
+  /* What version to specifically try to use.
+     See CURL_SSLVERSION defines below. */
+  CURLOPT(CURLOPT_SSLVERSION, CURLOPTTYPE_VALUES, 32),
+
+  /* What kind of HTTP time condition to use, see defines */
+  CURLOPT(CURLOPT_TIMECONDITION, CURLOPTTYPE_VALUES, 33),
+
+  /* Time to use with the above condition. Specified in number of seconds
+     since 1 Jan 1970 */
+  CURLOPT(CURLOPT_TIMEVALUE, CURLOPTTYPE_LONG, 34),
+
+  /* 35 = OBSOLETE */
+
+  /* Custom request, for customizing the get command like
+     HTTP: DELETE, TRACE and others
+     FTP: to use a different list command
+     */
+  CURLOPT(CURLOPT_CUSTOMREQUEST, CURLOPTTYPE_STRINGPOINT, 36),
+
+  /* FILE handle to use instead of stderr */
+  CURLOPT(CURLOPT_STDERR, CURLOPTTYPE_OBJECTPOINT, 37),
+
+  /* 38 is not used */
+
+  /* send linked-list of post-transfer QUOTE commands */
+  CURLOPT(CURLOPT_POSTQUOTE, CURLOPTTYPE_SLISTPOINT, 39),
+
+   /* OBSOLETE, do not use! */
+  CURLOPT(CURLOPT_OBSOLETE40, CURLOPTTYPE_OBJECTPOINT, 40),
+
+  /* talk a lot */
+  CURLOPT(CURLOPT_VERBOSE, CURLOPTTYPE_LONG, 41),
+
+  /* throw the header out too */
+  CURLOPT(CURLOPT_HEADER, CURLOPTTYPE_LONG, 42),
+
+  /* shut off the progress meter */
+  CURLOPT(CURLOPT_NOPROGRESS, CURLOPTTYPE_LONG, 43),
+
+  /* use HEAD to get http document */
+  CURLOPT(CURLOPT_NOBODY, CURLOPTTYPE_LONG, 44),
+
+  /* no output on http error codes >= 400 */
+  CURLOPT(CURLOPT_FAILONERROR, CURLOPTTYPE_LONG, 45),
+
+  /* this is an upload */
+  CURLOPT(CURLOPT_UPLOAD, CURLOPTTYPE_LONG, 46),
+
+  /* HTTP POST method */
+  CURLOPT(CURLOPT_POST, CURLOPTTYPE_LONG, 47),
+
+  /* bare names when listing directories */
+  CURLOPT(CURLOPT_DIRLISTONLY, CURLOPTTYPE_LONG, 48),
+
+  /* Append instead of overwrite on upload! */
+  CURLOPT(CURLOPT_APPEND, CURLOPTTYPE_LONG, 50),
+
+  /* Specify whether to read the user+password from the .netrc or the URL.
+   * This must be one of the CURL_NETRC_* enums below. */
+  CURLOPT(CURLOPT_NETRC, CURLOPTTYPE_VALUES, 51),
+
+  /* use Location: Luke! */
+  CURLOPT(CURLOPT_FOLLOWLOCATION, CURLOPTTYPE_LONG, 52),
+
+   /* transfer data in text/ASCII format */
+  CURLOPT(CURLOPT_TRANSFERTEXT, CURLOPTTYPE_LONG, 53),
+
+  /* HTTP PUT */
+  CURLOPT(CURLOPT_PUT, CURLOPTTYPE_LONG, 54),
+
+  /* 55 = OBSOLETE */
+
+  /* DEPRECATED
+   * Function that will be called instead of the internal progress display
+   * function. This function should be defined as the curl_progress_callback
+   * prototype defines. */
+  CURLOPT(CURLOPT_PROGRESSFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 56),
+
+  /* Data passed to the CURLOPT_PROGRESSFUNCTION and CURLOPT_XFERINFOFUNCTION
+     callbacks */
+  CURLOPT(CURLOPT_XFERINFODATA, CURLOPTTYPE_CBPOINT, 57),
+#define CURLOPT_PROGRESSDATA CURLOPT_XFERINFODATA
+
+  /* We want the referrer field set automatically when following locations */
+  CURLOPT(CURLOPT_AUTOREFERER, CURLOPTTYPE_LONG, 58),
+
+  /* Port of the proxy, can be set in the proxy string as well with:
+     "[host]:[port]" */
+  CURLOPT(CURLOPT_PROXYPORT, CURLOPTTYPE_LONG, 59),
+
+  /* size of the POST input data, if strlen() is not good to use */
+  CURLOPT(CURLOPT_POSTFIELDSIZE, CURLOPTTYPE_LONG, 60),
+
+  /* tunnel non-http operations through a HTTP proxy */
+  CURLOPT(CURLOPT_HTTPPROXYTUNNEL, CURLOPTTYPE_LONG, 61),
+
+  /* Set the interface string to use as outgoing network interface */
+  CURLOPT(CURLOPT_INTERFACE, CURLOPTTYPE_STRINGPOINT, 62),
+
+  /* Set the krb4/5 security level, this also enables krb4/5 awareness.  This
+   * is a string, 'clear', 'safe', 'confidential' or 'private'.  If the string
+   * is set but doesn't match one of these, 'private' will be used.  */
+  CURLOPT(CURLOPT_KRBLEVEL, CURLOPTTYPE_STRINGPOINT, 63),
+
+  /* Set if we should verify the peer in ssl handshake, set 1 to verify. */
+  CURLOPT(CURLOPT_SSL_VERIFYPEER, CURLOPTTYPE_LONG, 64),
+
+  /* The CApath or CAfile used to validate the peer certificate
+     this option is used only if SSL_VERIFYPEER is true */
+  CURLOPT(CURLOPT_CAINFO, CURLOPTTYPE_STRINGPOINT, 65),
+
+  /* 66 = OBSOLETE */
+  /* 67 = OBSOLETE */
+
+  /* Maximum number of http redirects to follow */
+  CURLOPT(CURLOPT_MAXREDIRS, CURLOPTTYPE_LONG, 68),
+
+  /* Pass a long set to 1 to get the date of the requested document (if
+     possible)! Pass a zero to shut it off. */
+  CURLOPT(CURLOPT_FILETIME, CURLOPTTYPE_LONG, 69),
+
+  /* This points to a linked list of telnet options */
+  CURLOPT(CURLOPT_TELNETOPTIONS, CURLOPTTYPE_SLISTPOINT, 70),
+
+  /* Max amount of cached alive connections */
+  CURLOPT(CURLOPT_MAXCONNECTS, CURLOPTTYPE_LONG, 71),
+
+  /* OBSOLETE, do not use! */
+  CURLOPT(CURLOPT_OBSOLETE72, CURLOPTTYPE_LONG, 72),
+
+  /* 73 = OBSOLETE */
+
+  /* Set to explicitly use a new connection for the upcoming transfer.
+     Do not use this unless you're absolutely sure of this, as it makes the
+     operation slower and is less friendly for the network. */
+  CURLOPT(CURLOPT_FRESH_CONNECT, CURLOPTTYPE_LONG, 74),
+
+  /* Set to explicitly forbid the upcoming transfer's connection to be re-used
+     when done. Do not use this unless you're absolutely sure of this, as it
+     makes the operation slower and is less friendly for the network. */
+  CURLOPT(CURLOPT_FORBID_REUSE, CURLOPTTYPE_LONG, 75),
+
+  /* Set to a file name that contains random data for libcurl to use to
+     seed the random engine when doing SSL connects. */
+  CURLOPT(CURLOPT_RANDOM_FILE, CURLOPTTYPE_STRINGPOINT, 76),
+
+  /* Set to the Entropy Gathering Daemon socket pathname */
+  CURLOPT(CURLOPT_EGDSOCKET, CURLOPTTYPE_STRINGPOINT, 77),
+
+  /* Time-out connect operations after this amount of seconds, if connects are
+     OK within this time, then fine... This only aborts the connect phase. */
+  CURLOPT(CURLOPT_CONNECTTIMEOUT, CURLOPTTYPE_LONG, 78),
+
+  /* Function that will be called to store headers (instead of fwrite). The
+   * parameters will use fwrite() syntax, make sure to follow them. */
+  CURLOPT(CURLOPT_HEADERFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 79),
+
+  /* Set this to force the HTTP request to get back to GET. Only really usable
+     if POST, PUT or a custom request have been used first.
+   */
+  CURLOPT(CURLOPT_HTTPGET, CURLOPTTYPE_LONG, 80),
+
+  /* Set if we should verify the Common name from the peer certificate in ssl
+   * handshake, set 1 to check existence, 2 to ensure that it matches the
+   * provided hostname. */
+  CURLOPT(CURLOPT_SSL_VERIFYHOST, CURLOPTTYPE_LONG, 81),
+
+  /* Specify which file name to write all known cookies in after completed
+     operation. Set file name to "-" (dash) to make it go to stdout. */
+  CURLOPT(CURLOPT_COOKIEJAR, CURLOPTTYPE_STRINGPOINT, 82),
+
+  /* Specify which SSL ciphers to use */
+  CURLOPT(CURLOPT_SSL_CIPHER_LIST, CURLOPTTYPE_STRINGPOINT, 83),
+
+  /* Specify which HTTP version to use! This must be set to one of the
+     CURL_HTTP_VERSION* enums set below. */
+  CURLOPT(CURLOPT_HTTP_VERSION, CURLOPTTYPE_VALUES, 84),
+
+  /* Specifically switch on or off the FTP engine's use of the EPSV command. By
+     default, that one will always be attempted before the more traditional
+     PASV command. */
+  CURLOPT(CURLOPT_FTP_USE_EPSV, CURLOPTTYPE_LONG, 85),
+
+  /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") */
+  CURLOPT(CURLOPT_SSLCERTTYPE, CURLOPTTYPE_STRINGPOINT, 86),
+
+  /* name of the file keeping your private SSL-key */
+  CURLOPT(CURLOPT_SSLKEY, CURLOPTTYPE_STRINGPOINT, 87),
+
+  /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") */
+  CURLOPT(CURLOPT_SSLKEYTYPE, CURLOPTTYPE_STRINGPOINT, 88),
+
+  /* crypto engine for the SSL-sub system */
+  CURLOPT(CURLOPT_SSLENGINE, CURLOPTTYPE_STRINGPOINT, 89),
+
+  /* set the crypto engine for the SSL-sub system as default
+     the param has no meaning...
+   */
+  CURLOPT(CURLOPT_SSLENGINE_DEFAULT, CURLOPTTYPE_LONG, 90),
+
+  /* Non-zero value means to use the global dns cache */
+  /* DEPRECATED, do not use! */
+  CURLOPT(CURLOPT_DNS_USE_GLOBAL_CACHE, CURLOPTTYPE_LONG, 91),
+
+  /* DNS cache timeout */
+  CURLOPT(CURLOPT_DNS_CACHE_TIMEOUT, CURLOPTTYPE_LONG, 92),
+
+  /* send linked-list of pre-transfer QUOTE commands */
+  CURLOPT(CURLOPT_PREQUOTE, CURLOPTTYPE_SLISTPOINT, 93),
+
+  /* set the debug function */
+  CURLOPT(CURLOPT_DEBUGFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 94),
+
+  /* set the data for the debug function */
+  CURLOPT(CURLOPT_DEBUGDATA, CURLOPTTYPE_CBPOINT, 95),
+
+  /* mark this as start of a cookie session */
+  CURLOPT(CURLOPT_COOKIESESSION, CURLOPTTYPE_LONG, 96),
+
+  /* The CApath directory used to validate the peer certificate
+     this option is used only if SSL_VERIFYPEER is true */
+  CURLOPT(CURLOPT_CAPATH, CURLOPTTYPE_STRINGPOINT, 97),
+
+  /* Instruct libcurl to use a smaller receive buffer */
+  CURLOPT(CURLOPT_BUFFERSIZE, CURLOPTTYPE_LONG, 98),
+
+  /* Instruct libcurl to not use any signal/alarm handlers, even when using
+     timeouts. This option is useful for multi-threaded applications.
+     See libcurl-the-guide for more background information. */
+  CURLOPT(CURLOPT_NOSIGNAL, CURLOPTTYPE_LONG, 99),
+
+  /* Provide a CURLShare for mutexing non-ts data */
+  CURLOPT(CURLOPT_SHARE, CURLOPTTYPE_OBJECTPOINT, 100),
+
+  /* indicates type of proxy. accepted values are CURLPROXY_HTTP (default),
+     CURLPROXY_HTTPS, CURLPROXY_SOCKS4, CURLPROXY_SOCKS4A and
+     CURLPROXY_SOCKS5. */
+  CURLOPT(CURLOPT_PROXYTYPE, CURLOPTTYPE_VALUES, 101),
+
+  /* Set the Accept-Encoding string. Use this to tell a server you would like
+     the response to be compressed. Before 7.21.6, this was known as
+     CURLOPT_ENCODING */
+  CURLOPT(CURLOPT_ACCEPT_ENCODING, CURLOPTTYPE_STRINGPOINT, 102),
+
+  /* Set pointer to private data */
+  CURLOPT(CURLOPT_PRIVATE, CURLOPTTYPE_OBJECTPOINT, 103),
+
+  /* Set aliases for HTTP 200 in the HTTP Response header */
+  CURLOPT(CURLOPT_HTTP200ALIASES, CURLOPTTYPE_SLISTPOINT, 104),
+
+  /* Continue to send authentication (user+password) when following locations,
+     even when hostname changed. This can potentially send off the name
+     and password to whatever host the server decides. */
+  CURLOPT(CURLOPT_UNRESTRICTED_AUTH, CURLOPTTYPE_LONG, 105),
+
+  /* Specifically switch on or off the FTP engine's use of the EPRT command (
+     it also disables the LPRT attempt). By default, those ones will always be
+     attempted before the good old traditional PORT command. */
+  CURLOPT(CURLOPT_FTP_USE_EPRT, CURLOPTTYPE_LONG, 106),
+
+  /* Set this to a bitmask value to enable the particular authentications
+     methods you like. Use this in combination with CURLOPT_USERPWD.
+     Note that setting multiple bits may cause extra network round-trips. */
+  CURLOPT(CURLOPT_HTTPAUTH, CURLOPTTYPE_VALUES, 107),
+
+  /* Set the ssl context callback function, currently only for OpenSSL or
+     WolfSSL ssl_ctx, or mbedTLS mbedtls_ssl_config in the second argument.
+     The function must match the curl_ssl_ctx_callback prototype. */
+  CURLOPT(CURLOPT_SSL_CTX_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 108),
+
+  /* Set the userdata for the ssl context callback function's third
+     argument */
+  CURLOPT(CURLOPT_SSL_CTX_DATA, CURLOPTTYPE_CBPOINT, 109),
+
+  /* FTP Option that causes missing dirs to be created on the remote server.
+     In 7.19.4 we introduced the convenience enums for this option using the
+     CURLFTP_CREATE_DIR prefix.
+  */
+  CURLOPT(CURLOPT_FTP_CREATE_MISSING_DIRS, CURLOPTTYPE_LONG, 110),
+
+  /* Set this to a bitmask value to enable the particular authentications
+     methods you like. Use this in combination with CURLOPT_PROXYUSERPWD.
+     Note that setting multiple bits may cause extra network round-trips. */
+  CURLOPT(CURLOPT_PROXYAUTH, CURLOPTTYPE_VALUES, 111),
+
+  /* Option that changes the timeout, in seconds, associated with getting a
+     response.  This is different from transfer timeout time and essentially
+     places a demand on the server to acknowledge commands in a timely
+     manner. For FTP, SMTP, IMAP and POP3. */
+  CURLOPT(CURLOPT_SERVER_RESPONSE_TIMEOUT, CURLOPTTYPE_LONG, 112),
+
+  /* Set this option to one of the CURL_IPRESOLVE_* defines (see below) to
+     tell libcurl to use those IP versions only. This only has effect on
+     systems with support for more than one, i.e IPv4 _and_ IPv6. */
+  CURLOPT(CURLOPT_IPRESOLVE, CURLOPTTYPE_VALUES, 113),
+
+  /* Set this option to limit the size of a file that will be downloaded from
+     an HTTP or FTP server.
+
+     Note there is also _LARGE version which adds large file support for
+     platforms which have larger off_t sizes.  See MAXFILESIZE_LARGE below. */
+  CURLOPT(CURLOPT_MAXFILESIZE, CURLOPTTYPE_LONG, 114),
+
+  /* See the comment for INFILESIZE above, but in short, specifies
+   * the size of the file being uploaded.  -1 means unknown.
+   */
+  CURLOPT(CURLOPT_INFILESIZE_LARGE, CURLOPTTYPE_OFF_T, 115),
+
+  /* Sets the continuation offset.  There is also a CURLOPTTYPE_LONG version
+   * of this; look above for RESUME_FROM.
+   */
+  CURLOPT(CURLOPT_RESUME_FROM_LARGE, CURLOPTTYPE_OFF_T, 116),
+
+  /* Sets the maximum size of data that will be downloaded from
+   * an HTTP or FTP server.  See MAXFILESIZE above for the LONG version.
+   */
+  CURLOPT(CURLOPT_MAXFILESIZE_LARGE, CURLOPTTYPE_OFF_T, 117),
+
+  /* Set this option to the file name of your .netrc file you want libcurl
+     to parse (using the CURLOPT_NETRC option). If not set, libcurl will do
+     a poor attempt to find the user's home directory and check for a .netrc
+     file in there. */
+  CURLOPT(CURLOPT_NETRC_FILE, CURLOPTTYPE_STRINGPOINT, 118),
+
+  /* Enable SSL/TLS for FTP, pick one of:
+     CURLUSESSL_TRY     - try using SSL, proceed anyway otherwise
+     CURLUSESSL_CONTROL - SSL for the control connection or fail
+     CURLUSESSL_ALL     - SSL for all communication or fail
+  */
+  CURLOPT(CURLOPT_USE_SSL, CURLOPTTYPE_VALUES, 119),
+
+  /* The _LARGE version of the standard POSTFIELDSIZE option */
+  CURLOPT(CURLOPT_POSTFIELDSIZE_LARGE, CURLOPTTYPE_OFF_T, 120),
+
+  /* Enable/disable the TCP Nagle algorithm */
+  CURLOPT(CURLOPT_TCP_NODELAY, CURLOPTTYPE_LONG, 121),
+
+  /* 122 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
+  /* 123 OBSOLETE. Gone in 7.16.0 */
+  /* 124 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
+  /* 125 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
+  /* 126 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
+  /* 127 OBSOLETE. Gone in 7.16.0 */
+  /* 128 OBSOLETE. Gone in 7.16.0 */
+
+  /* When FTP over SSL/TLS is selected (with CURLOPT_USE_SSL), this option
+     can be used to change libcurl's default action which is to first try
+     "AUTH SSL" and then "AUTH TLS" in this order, and proceed when a OK
+     response has been received.
+
+     Available parameters are:
+     CURLFTPAUTH_DEFAULT - let libcurl decide
+     CURLFTPAUTH_SSL     - try "AUTH SSL" first, then TLS
+     CURLFTPAUTH_TLS     - try "AUTH TLS" first, then SSL
+  */
+  CURLOPT(CURLOPT_FTPSSLAUTH, CURLOPTTYPE_VALUES, 129),
+
+  CURLOPT(CURLOPT_IOCTLFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 130),
+  CURLOPT(CURLOPT_IOCTLDATA, CURLOPTTYPE_CBPOINT, 131),
+
+  /* 132 OBSOLETE. Gone in 7.16.0 */
+  /* 133 OBSOLETE. Gone in 7.16.0 */
+
+  /* null-terminated string for pass on to the FTP server when asked for
+     "account" info */
+  CURLOPT(CURLOPT_FTP_ACCOUNT, CURLOPTTYPE_STRINGPOINT, 134),
+
+  /* feed cookie into cookie engine */
+  CURLOPT(CURLOPT_COOKIELIST, CURLOPTTYPE_STRINGPOINT, 135),
+
+  /* ignore Content-Length */
+  CURLOPT(CURLOPT_IGNORE_CONTENT_LENGTH, CURLOPTTYPE_LONG, 136),
+
+  /* Set to non-zero to skip the IP address received in a 227 PASV FTP server
+     response. Typically used for FTP-SSL purposes but is not restricted to
+     that. libcurl will then instead use the same IP address it used for the
+     control connection. */
+  CURLOPT(CURLOPT_FTP_SKIP_PASV_IP, CURLOPTTYPE_LONG, 137),
+
+  /* Select "file method" to use when doing FTP, see the curl_ftpmethod
+     above. */
+  CURLOPT(CURLOPT_FTP_FILEMETHOD, CURLOPTTYPE_VALUES, 138),
+
+  /* Local port number to bind the socket to */
+  CURLOPT(CURLOPT_LOCALPORT, CURLOPTTYPE_LONG, 139),
+
+  /* Number of ports to try, including the first one set with LOCALPORT.
+     Thus, setting it to 1 will make no additional attempts but the first.
+  */
+  CURLOPT(CURLOPT_LOCALPORTRANGE, CURLOPTTYPE_LONG, 140),
+
+  /* no transfer, set up connection and let application use the socket by
+     extracting it with CURLINFO_LASTSOCKET */
+  CURLOPT(CURLOPT_CONNECT_ONLY, CURLOPTTYPE_LONG, 141),
+
+  /* Function that will be called to convert from the
+     network encoding (instead of using the iconv calls in libcurl) */
+  CURLOPT(CURLOPT_CONV_FROM_NETWORK_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 142),
+
+  /* Function that will be called to convert to the
+     network encoding (instead of using the iconv calls in libcurl) */
+  CURLOPT(CURLOPT_CONV_TO_NETWORK_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 143),
+
+  /* Function that will be called to convert from UTF8
+     (instead of using the iconv calls in libcurl)
+     Note that this is used only for SSL certificate processing */
+  CURLOPT(CURLOPT_CONV_FROM_UTF8_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 144),
+
+  /* if the connection proceeds too quickly then need to slow it down */
+  /* limit-rate: maximum number of bytes per second to send or receive */
+  CURLOPT(CURLOPT_MAX_SEND_SPEED_LARGE, CURLOPTTYPE_OFF_T, 145),
+  CURLOPT(CURLOPT_MAX_RECV_SPEED_LARGE, CURLOPTTYPE_OFF_T, 146),
+
+  /* Pointer to command string to send if USER/PASS fails. */
+  CURLOPT(CURLOPT_FTP_ALTERNATIVE_TO_USER, CURLOPTTYPE_STRINGPOINT, 147),
+
+  /* callback function for setting socket options */
+  CURLOPT(CURLOPT_SOCKOPTFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 148),
+  CURLOPT(CURLOPT_SOCKOPTDATA, CURLOPTTYPE_CBPOINT, 149),
+
+  /* set to 0 to disable session ID re-use for this transfer, default is
+     enabled (== 1) */
+  CURLOPT(CURLOPT_SSL_SESSIONID_CACHE, CURLOPTTYPE_LONG, 150),
+
+  /* allowed SSH authentication methods */
+  CURLOPT(CURLOPT_SSH_AUTH_TYPES, CURLOPTTYPE_VALUES, 151),
+
+  /* Used by scp/sftp to do public/private key authentication */
+  CURLOPT(CURLOPT_SSH_PUBLIC_KEYFILE, CURLOPTTYPE_STRINGPOINT, 152),
+  CURLOPT(CURLOPT_SSH_PRIVATE_KEYFILE, CURLOPTTYPE_STRINGPOINT, 153),
+
+  /* Send CCC (Clear Command Channel) after authentication */
+  CURLOPT(CURLOPT_FTP_SSL_CCC, CURLOPTTYPE_LONG, 154),
+
+  /* Same as TIMEOUT and CONNECTTIMEOUT, but with ms resolution */
+  CURLOPT(CURLOPT_TIMEOUT_MS, CURLOPTTYPE_LONG, 155),
+  CURLOPT(CURLOPT_CONNECTTIMEOUT_MS, CURLOPTTYPE_LONG, 156),
+
+  /* set to zero to disable the libcurl's decoding and thus pass the raw body
+     data to the application even when it is encoded/compressed */
+  CURLOPT(CURLOPT_HTTP_TRANSFER_DECODING, CURLOPTTYPE_LONG, 157),
+  CURLOPT(CURLOPT_HTTP_CONTENT_DECODING, CURLOPTTYPE_LONG, 158),
+
+  /* Permission used when creating new files and directories on the remote
+     server for protocols that support it, SFTP/SCP/FILE */
+  CURLOPT(CURLOPT_NEW_FILE_PERMS, CURLOPTTYPE_LONG, 159),
+  CURLOPT(CURLOPT_NEW_DIRECTORY_PERMS, CURLOPTTYPE_LONG, 160),
+
+  /* Set the behavior of POST when redirecting. Values must be set to one
+     of CURL_REDIR* defines below. This used to be called CURLOPT_POST301 */
+  CURLOPT(CURLOPT_POSTREDIR, CURLOPTTYPE_VALUES, 161),
+
+  /* used by scp/sftp to verify the host's public key */
+  CURLOPT(CURLOPT_SSH_HOST_PUBLIC_KEY_MD5, CURLOPTTYPE_STRINGPOINT, 162),
+
+  /* Callback function for opening socket (instead of socket(2)). Optionally,
+     callback is able change the address or refuse to connect returning
+     CURL_SOCKET_BAD.  The callback should have type
+     curl_opensocket_callback */
+  CURLOPT(CURLOPT_OPENSOCKETFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 163),
+  CURLOPT(CURLOPT_OPENSOCKETDATA, CURLOPTTYPE_CBPOINT, 164),
+
+  /* POST volatile input fields. */
+  CURLOPT(CURLOPT_COPYPOSTFIELDS, CURLOPTTYPE_OBJECTPOINT, 165),
+
+  /* set transfer mode (;type=<a|i>) when doing FTP via an HTTP proxy */
+  CURLOPT(CURLOPT_PROXY_TRANSFER_MODE, CURLOPTTYPE_LONG, 166),
+
+  /* Callback function for seeking in the input stream */
+  CURLOPT(CURLOPT_SEEKFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 167),
+  CURLOPT(CURLOPT_SEEKDATA, CURLOPTTYPE_CBPOINT, 168),
+
+  /* CRL file */
+  CURLOPT(CURLOPT_CRLFILE, CURLOPTTYPE_STRINGPOINT, 169),
+
+  /* Issuer certificate */
+  CURLOPT(CURLOPT_ISSUERCERT, CURLOPTTYPE_STRINGPOINT, 170),
+
+  /* (IPv6) Address scope */
+  CURLOPT(CURLOPT_ADDRESS_SCOPE, CURLOPTTYPE_LONG, 171),
+
+  /* Collect certificate chain info and allow it to get retrievable with
+     CURLINFO_CERTINFO after the transfer is complete. */
+  CURLOPT(CURLOPT_CERTINFO, CURLOPTTYPE_LONG, 172),
+
+  /* "name" and "pwd" to use when fetching. */
+  CURLOPT(CURLOPT_USERNAME, CURLOPTTYPE_STRINGPOINT, 173),
+  CURLOPT(CURLOPT_PASSWORD, CURLOPTTYPE_STRINGPOINT, 174),
+
+    /* "name" and "pwd" to use with Proxy when fetching. */
+  CURLOPT(CURLOPT_PROXYUSERNAME, CURLOPTTYPE_STRINGPOINT, 175),
+  CURLOPT(CURLOPT_PROXYPASSWORD, CURLOPTTYPE_STRINGPOINT, 176),
+
+  /* Comma separated list of hostnames defining no-proxy zones. These should
+     match both hostnames directly, and hostnames within a domain. For
+     example, local.com will match local.com and www.local.com, but NOT
+     notlocal.com or www.notlocal.com. For compatibility with other
+     implementations of this, .local.com will be considered to be the same as
+     local.com. A single * is the only valid wildcard, and effectively
+     disables the use of proxy. */
+  CURLOPT(CURLOPT_NOPROXY, CURLOPTTYPE_STRINGPOINT, 177),
+
+  /* block size for TFTP transfers */
+  CURLOPT(CURLOPT_TFTP_BLKSIZE, CURLOPTTYPE_LONG, 178),
+
+  /* Socks Service */
+  /* DEPRECATED, do not use! */
+  CURLOPT(CURLOPT_SOCKS5_GSSAPI_SERVICE, CURLOPTTYPE_STRINGPOINT, 179),
+
+  /* Socks Service */
+  CURLOPT(CURLOPT_SOCKS5_GSSAPI_NEC, CURLOPTTYPE_LONG, 180),
+
+  /* set the bitmask for the protocols that are allowed to be used for the
+     transfer, which thus helps the app which takes URLs from users or other
+     external inputs and want to restrict what protocol(s) to deal
+     with. Defaults to CURLPROTO_ALL. */
+  CURLOPT(CURLOPT_PROTOCOLS, CURLOPTTYPE_LONG, 181),
+
+  /* set the bitmask for the protocols that libcurl is allowed to follow to,
+     as a subset of the CURLOPT_PROTOCOLS ones. That means the protocol needs
+     to be set in both bitmasks to be allowed to get redirected to. */
+  CURLOPT(CURLOPT_REDIR_PROTOCOLS, CURLOPTTYPE_LONG, 182),
+
+  /* set the SSH knownhost file name to use */
+  CURLOPT(CURLOPT_SSH_KNOWNHOSTS, CURLOPTTYPE_STRINGPOINT, 183),
+
+  /* set the SSH host key callback, must point to a curl_sshkeycallback
+     function */
+  CURLOPT(CURLOPT_SSH_KEYFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 184),
+
+  /* set the SSH host key callback custom pointer */
+  CURLOPT(CURLOPT_SSH_KEYDATA, CURLOPTTYPE_CBPOINT, 185),
+
+  /* set the SMTP mail originator */
+  CURLOPT(CURLOPT_MAIL_FROM, CURLOPTTYPE_STRINGPOINT, 186),
+
+  /* set the list of SMTP mail receiver(s) */
+  CURLOPT(CURLOPT_MAIL_RCPT, CURLOPTTYPE_SLISTPOINT, 187),
+
+  /* FTP: send PRET before PASV */
+  CURLOPT(CURLOPT_FTP_USE_PRET, CURLOPTTYPE_LONG, 188),
+
+  /* RTSP request method (OPTIONS, SETUP, PLAY, etc...) */
+  CURLOPT(CURLOPT_RTSP_REQUEST, CURLOPTTYPE_VALUES, 189),
+
+  /* The RTSP session identifier */
+  CURLOPT(CURLOPT_RTSP_SESSION_ID, CURLOPTTYPE_STRINGPOINT, 190),
+
+  /* The RTSP stream URI */
+  CURLOPT(CURLOPT_RTSP_STREAM_URI, CURLOPTTYPE_STRINGPOINT, 191),
+
+  /* The Transport: header to use in RTSP requests */
+  CURLOPT(CURLOPT_RTSP_TRANSPORT, CURLOPTTYPE_STRINGPOINT, 192),
+
+  /* Manually initialize the client RTSP CSeq for this handle */
+  CURLOPT(CURLOPT_RTSP_CLIENT_CSEQ, CURLOPTTYPE_LONG, 193),
+
+  /* Manually initialize the server RTSP CSeq for this handle */
+  CURLOPT(CURLOPT_RTSP_SERVER_CSEQ, CURLOPTTYPE_LONG, 194),
+
+  /* The stream to pass to INTERLEAVEFUNCTION. */
+  CURLOPT(CURLOPT_INTERLEAVEDATA, CURLOPTTYPE_CBPOINT, 195),
+
+  /* Let the application define a custom write method for RTP data */
+  CURLOPT(CURLOPT_INTERLEAVEFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 196),
+
+  /* Turn on wildcard matching */
+  CURLOPT(CURLOPT_WILDCARDMATCH, CURLOPTTYPE_LONG, 197),
+
+  /* Directory matching callback called before downloading of an
+     individual file (chunk) started */
+  CURLOPT(CURLOPT_CHUNK_BGN_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 198),
+
+  /* Directory matching callback called after the file (chunk)
+     was downloaded, or skipped */
+  CURLOPT(CURLOPT_CHUNK_END_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 199),
+
+  /* Change match (fnmatch-like) callback for wildcard matching */
+  CURLOPT(CURLOPT_FNMATCH_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 200),
+
+  /* Let the application define custom chunk data pointer */
+  CURLOPT(CURLOPT_CHUNK_DATA, CURLOPTTYPE_CBPOINT, 201),
+
+  /* FNMATCH_FUNCTION user pointer */
+  CURLOPT(CURLOPT_FNMATCH_DATA, CURLOPTTYPE_CBPOINT, 202),
+
+  /* send linked-list of name:port:address sets */
+  CURLOPT(CURLOPT_RESOLVE, CURLOPTTYPE_SLISTPOINT, 203),
+
+  /* Set a username for authenticated TLS */
+  CURLOPT(CURLOPT_TLSAUTH_USERNAME, CURLOPTTYPE_STRINGPOINT, 204),
+
+  /* Set a password for authenticated TLS */
+  CURLOPT(CURLOPT_TLSAUTH_PASSWORD, CURLOPTTYPE_STRINGPOINT, 205),
+
+  /* Set authentication type for authenticated TLS */
+  CURLOPT(CURLOPT_TLSAUTH_TYPE, CURLOPTTYPE_STRINGPOINT, 206),
+
+  /* Set to 1 to enable the "TE:" header in HTTP requests to ask for
+     compressed transfer-encoded responses. Set to 0 to disable the use of TE:
+     in outgoing requests. The current default is 0, but it might change in a
+     future libcurl release.
+
+     libcurl will ask for the compressed methods it knows of, and if that
+     isn't any, it will not ask for transfer-encoding at all even if this
+     option is set to 1.
+
+  */
+  CURLOPT(CURLOPT_TRANSFER_ENCODING, CURLOPTTYPE_LONG, 207),
+
+  /* Callback function for closing socket (instead of close(2)). The callback
+     should have type curl_closesocket_callback */
+  CURLOPT(CURLOPT_CLOSESOCKETFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 208),
+  CURLOPT(CURLOPT_CLOSESOCKETDATA, CURLOPTTYPE_CBPOINT, 209),
+
+  /* allow GSSAPI credential delegation */
+  CURLOPT(CURLOPT_GSSAPI_DELEGATION, CURLOPTTYPE_VALUES, 210),
+
+  /* Set the name servers to use for DNS resolution */
+  CURLOPT(CURLOPT_DNS_SERVERS, CURLOPTTYPE_STRINGPOINT, 211),
+
+  /* Time-out accept operations (currently for FTP only) after this amount
+     of milliseconds. */
+  CURLOPT(CURLOPT_ACCEPTTIMEOUT_MS, CURLOPTTYPE_LONG, 212),
+
+  /* Set TCP keepalive */
+  CURLOPT(CURLOPT_TCP_KEEPALIVE, CURLOPTTYPE_LONG, 213),
+
+  /* non-universal keepalive knobs (Linux, AIX, HP-UX, more) */
+  CURLOPT(CURLOPT_TCP_KEEPIDLE, CURLOPTTYPE_LONG, 214),
+  CURLOPT(CURLOPT_TCP_KEEPINTVL, CURLOPTTYPE_LONG, 215),
+
+  /* Enable/disable specific SSL features with a bitmask, see CURLSSLOPT_* */
+  CURLOPT(CURLOPT_SSL_OPTIONS, CURLOPTTYPE_VALUES, 216),
+
+  /* Set the SMTP auth originator */
+  CURLOPT(CURLOPT_MAIL_AUTH, CURLOPTTYPE_STRINGPOINT, 217),
+
+  /* Enable/disable SASL initial response */
+  CURLOPT(CURLOPT_SASL_IR, CURLOPTTYPE_LONG, 218),
+
+  /* Function that will be called instead of the internal progress display
+   * function. This function should be defined as the curl_xferinfo_callback
+   * prototype defines. (Deprecates CURLOPT_PROGRESSFUNCTION) */
+  CURLOPT(CURLOPT_XFERINFOFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 219),
+
+  /* The XOAUTH2 bearer token */
+  CURLOPT(CURLOPT_XOAUTH2_BEARER, CURLOPTTYPE_STRINGPOINT, 220),
+
+  /* Set the interface string to use as outgoing network
+   * interface for DNS requests.
+   * Only supported by the c-ares DNS backend */
+  CURLOPT(CURLOPT_DNS_INTERFACE, CURLOPTTYPE_STRINGPOINT, 221),
+
+  /* Set the local IPv4 address to use for outgoing DNS requests.
+   * Only supported by the c-ares DNS backend */
+  CURLOPT(CURLOPT_DNS_LOCAL_IP4, CURLOPTTYPE_STRINGPOINT, 222),
+
+  /* Set the local IPv6 address to use for outgoing DNS requests.
+   * Only supported by the c-ares DNS backend */
+  CURLOPT(CURLOPT_DNS_LOCAL_IP6, CURLOPTTYPE_STRINGPOINT, 223),
+
+  /* Set authentication options directly */
+  CURLOPT(CURLOPT_LOGIN_OPTIONS, CURLOPTTYPE_STRINGPOINT, 224),
+
+  /* Enable/disable TLS NPN extension (http2 over ssl might fail without) */
+  CURLOPT(CURLOPT_SSL_ENABLE_NPN, CURLOPTTYPE_LONG, 225),
+
+  /* Enable/disable TLS ALPN extension (http2 over ssl might fail without) */
+  CURLOPT(CURLOPT_SSL_ENABLE_ALPN, CURLOPTTYPE_LONG, 226),
+
+  /* Time to wait for a response to a HTTP request containing an
+   * Expect: 100-continue header before sending the data anyway. */
+  CURLOPT(CURLOPT_EXPECT_100_TIMEOUT_MS, CURLOPTTYPE_LONG, 227),
+
+  /* This points to a linked list of headers used for proxy requests only,
+     struct curl_slist kind */
+  CURLOPT(CURLOPT_PROXYHEADER, CURLOPTTYPE_SLISTPOINT, 228),
+
+  /* Pass in a bitmask of "header options" */
+  CURLOPT(CURLOPT_HEADEROPT, CURLOPTTYPE_VALUES, 229),
+
+  /* The public key in DER form used to validate the peer public key
+     this option is used only if SSL_VERIFYPEER is true */
+  CURLOPT(CURLOPT_PINNEDPUBLICKEY, CURLOPTTYPE_STRINGPOINT, 230),
+
+  /* Path to Unix domain socket */
+  CURLOPT(CURLOPT_UNIX_SOCKET_PATH, CURLOPTTYPE_STRINGPOINT, 231),
+
+  /* Set if we should verify the certificate status. */
+  CURLOPT(CURLOPT_SSL_VERIFYSTATUS, CURLOPTTYPE_LONG, 232),
+
+  /* Set if we should enable TLS false start. */
+  CURLOPT(CURLOPT_SSL_FALSESTART, CURLOPTTYPE_LONG, 233),
+
+  /* Do not squash dot-dot sequences */
+  CURLOPT(CURLOPT_PATH_AS_IS, CURLOPTTYPE_LONG, 234),
+
+  /* Proxy Service Name */
+  CURLOPT(CURLOPT_PROXY_SERVICE_NAME, CURLOPTTYPE_STRINGPOINT, 235),
+
+  /* Service Name */
+  CURLOPT(CURLOPT_SERVICE_NAME, CURLOPTTYPE_STRINGPOINT, 236),
+
+  /* Wait/don't wait for pipe/mutex to clarify */
+  CURLOPT(CURLOPT_PIPEWAIT, CURLOPTTYPE_LONG, 237),
+
+  /* Set the protocol used when curl is given a URL without a protocol */
+  CURLOPT(CURLOPT_DEFAULT_PROTOCOL, CURLOPTTYPE_STRINGPOINT, 238),
+
+  /* Set stream weight, 1 - 256 (default is 16) */
+  CURLOPT(CURLOPT_STREAM_WEIGHT, CURLOPTTYPE_LONG, 239),
+
+  /* Set stream dependency on another CURL handle */
+  CURLOPT(CURLOPT_STREAM_DEPENDS, CURLOPTTYPE_OBJECTPOINT, 240),
+
+  /* Set E-xclusive stream dependency on another CURL handle */
+  CURLOPT(CURLOPT_STREAM_DEPENDS_E, CURLOPTTYPE_OBJECTPOINT, 241),
+
+  /* Do not send any tftp option requests to the server */
+  CURLOPT(CURLOPT_TFTP_NO_OPTIONS, CURLOPTTYPE_LONG, 242),
+
+  /* Linked-list of host:port:connect-to-host:connect-to-port,
+     overrides the URL's host:port (only for the network layer) */
+  CURLOPT(CURLOPT_CONNECT_TO, CURLOPTTYPE_SLISTPOINT, 243),
+
+  /* Set TCP Fast Open */
+  CURLOPT(CURLOPT_TCP_FASTOPEN, CURLOPTTYPE_LONG, 244),
+
+  /* Continue to send data if the server responds early with an
+   * HTTP status code >= 300 */
+  CURLOPT(CURLOPT_KEEP_SENDING_ON_ERROR, CURLOPTTYPE_LONG, 245),
+
+  /* The CApath or CAfile used to validate the proxy certificate
+     this option is used only if PROXY_SSL_VERIFYPEER is true */
+  CURLOPT(CURLOPT_PROXY_CAINFO, CURLOPTTYPE_STRINGPOINT, 246),
+
+  /* The CApath directory used to validate the proxy certificate
+     this option is used only if PROXY_SSL_VERIFYPEER is true */
+  CURLOPT(CURLOPT_PROXY_CAPATH, CURLOPTTYPE_STRINGPOINT, 247),
+
+  /* Set if we should verify the proxy in ssl handshake,
+     set 1 to verify. */
+  CURLOPT(CURLOPT_PROXY_SSL_VERIFYPEER, CURLOPTTYPE_LONG, 248),
+
+  /* Set if we should verify the Common name from the proxy certificate in ssl
+   * handshake, set 1 to check existence, 2 to ensure that it matches
+   * the provided hostname. */
+  CURLOPT(CURLOPT_PROXY_SSL_VERIFYHOST, CURLOPTTYPE_LONG, 249),
+
+  /* What version to specifically try to use for proxy.
+     See CURL_SSLVERSION defines below. */
+  CURLOPT(CURLOPT_PROXY_SSLVERSION, CURLOPTTYPE_VALUES, 250),
+
+  /* Set a username for authenticated TLS for proxy */
+  CURLOPT(CURLOPT_PROXY_TLSAUTH_USERNAME, CURLOPTTYPE_STRINGPOINT, 251),
+
+  /* Set a password for authenticated TLS for proxy */
+  CURLOPT(CURLOPT_PROXY_TLSAUTH_PASSWORD, CURLOPTTYPE_STRINGPOINT, 252),
+
+  /* Set authentication type for authenticated TLS for proxy */
+  CURLOPT(CURLOPT_PROXY_TLSAUTH_TYPE, CURLOPTTYPE_STRINGPOINT, 253),
+
+  /* name of the file keeping your private SSL-certificate for proxy */
+  CURLOPT(CURLOPT_PROXY_SSLCERT, CURLOPTTYPE_STRINGPOINT, 254),
+
+  /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") for
+     proxy */
+  CURLOPT(CURLOPT_PROXY_SSLCERTTYPE, CURLOPTTYPE_STRINGPOINT, 255),
+
+  /* name of the file keeping your private SSL-key for proxy */
+  CURLOPT(CURLOPT_PROXY_SSLKEY, CURLOPTTYPE_STRINGPOINT, 256),
+
+  /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") for
+     proxy */
+  CURLOPT(CURLOPT_PROXY_SSLKEYTYPE, CURLOPTTYPE_STRINGPOINT, 257),
+
+  /* password for the SSL private key for proxy */
+  CURLOPT(CURLOPT_PROXY_KEYPASSWD, CURLOPTTYPE_STRINGPOINT, 258),
+
+  /* Specify which SSL ciphers to use for proxy */
+  CURLOPT(CURLOPT_PROXY_SSL_CIPHER_LIST, CURLOPTTYPE_STRINGPOINT, 259),
+
+  /* CRL file for proxy */
+  CURLOPT(CURLOPT_PROXY_CRLFILE, CURLOPTTYPE_STRINGPOINT, 260),
+
+  /* Enable/disable specific SSL features with a bitmask for proxy, see
+     CURLSSLOPT_* */
+  CURLOPT(CURLOPT_PROXY_SSL_OPTIONS, CURLOPTTYPE_LONG, 261),
+
+  /* Name of pre proxy to use. */
+  CURLOPT(CURLOPT_PRE_PROXY, CURLOPTTYPE_STRINGPOINT, 262),
+
+  /* The public key in DER form used to validate the proxy public key
+     this option is used only if PROXY_SSL_VERIFYPEER is true */
+  CURLOPT(CURLOPT_PROXY_PINNEDPUBLICKEY, CURLOPTTYPE_STRINGPOINT, 263),
+
+  /* Path to an abstract Unix domain socket */
+  CURLOPT(CURLOPT_ABSTRACT_UNIX_SOCKET, CURLOPTTYPE_STRINGPOINT, 264),
+
+  /* Suppress proxy CONNECT response headers from user callbacks */
+  CURLOPT(CURLOPT_SUPPRESS_CONNECT_HEADERS, CURLOPTTYPE_LONG, 265),
+
+  /* The request target, instead of extracted from the URL */
+  CURLOPT(CURLOPT_REQUEST_TARGET, CURLOPTTYPE_STRINGPOINT, 266),
+
+  /* bitmask of allowed auth methods for connections to SOCKS5 proxies */
+  CURLOPT(CURLOPT_SOCKS5_AUTH, CURLOPTTYPE_LONG, 267),
+
+  /* Enable/disable SSH compression */
+  CURLOPT(CURLOPT_SSH_COMPRESSION, CURLOPTTYPE_LONG, 268),
+
+  /* Post MIME data. */
+  CURLOPT(CURLOPT_MIMEPOST, CURLOPTTYPE_OBJECTPOINT, 269),
+
+  /* Time to use with the CURLOPT_TIMECONDITION. Specified in number of
+     seconds since 1 Jan 1970. */
+  CURLOPT(CURLOPT_TIMEVALUE_LARGE, CURLOPTTYPE_OFF_T, 270),
+
+  /* Head start in milliseconds to give happy eyeballs. */
+  CURLOPT(CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS, CURLOPTTYPE_LONG, 271),
+
+  /* Function that will be called before a resolver request is made */
+  CURLOPT(CURLOPT_RESOLVER_START_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 272),
+
+  /* User data to pass to the resolver start callback. */
+  CURLOPT(CURLOPT_RESOLVER_START_DATA, CURLOPTTYPE_CBPOINT, 273),
+
+  /* send HAProxy PROXY protocol header? */
+  CURLOPT(CURLOPT_HAPROXYPROTOCOL, CURLOPTTYPE_LONG, 274),
+
+  /* shuffle addresses before use when DNS returns multiple */
+  CURLOPT(CURLOPT_DNS_SHUFFLE_ADDRESSES, CURLOPTTYPE_LONG, 275),
+
+  /* Specify which TLS 1.3 ciphers suites to use */
+  CURLOPT(CURLOPT_TLS13_CIPHERS, CURLOPTTYPE_STRINGPOINT, 276),
+  CURLOPT(CURLOPT_PROXY_TLS13_CIPHERS, CURLOPTTYPE_STRINGPOINT, 277),
+
+  /* Disallow specifying username/login in URL. */
+  CURLOPT(CURLOPT_DISALLOW_USERNAME_IN_URL, CURLOPTTYPE_LONG, 278),
+
+  /* DNS-over-HTTPS URL */
+  CURLOPT(CURLOPT_DOH_URL, CURLOPTTYPE_STRINGPOINT, 279),
+
+  /* Preferred buffer size to use for uploads */
+  CURLOPT(CURLOPT_UPLOAD_BUFFERSIZE, CURLOPTTYPE_LONG, 280),
+
+  /* Time in ms between connection upkeep calls for long-lived connections. */
+  CURLOPT(CURLOPT_UPKEEP_INTERVAL_MS, CURLOPTTYPE_LONG, 281),
+
+  /* Specify URL using CURL URL API. */
+  CURLOPT(CURLOPT_CURLU, CURLOPTTYPE_OBJECTPOINT, 282),
+
+  /* add trailing data just after no more data is available */
+  CURLOPT(CURLOPT_TRAILERFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 283),
+
+  /* pointer to be passed to HTTP_TRAILER_FUNCTION */
+  CURLOPT(CURLOPT_TRAILERDATA, CURLOPTTYPE_CBPOINT, 284),
+
+  /* set this to 1L to allow HTTP/0.9 responses or 0L to disallow */
+  CURLOPT(CURLOPT_HTTP09_ALLOWED, CURLOPTTYPE_LONG, 285),
+
+  /* alt-svc control bitmask */
+  CURLOPT(CURLOPT_ALTSVC_CTRL, CURLOPTTYPE_LONG, 286),
+
+  /* alt-svc cache file name to possibly read from/write to */
+  CURLOPT(CURLOPT_ALTSVC, CURLOPTTYPE_STRINGPOINT, 287),
+
+  /* maximum age (idle time) of a connection to consider it for reuse
+   * (in seconds) */
+  CURLOPT(CURLOPT_MAXAGE_CONN, CURLOPTTYPE_LONG, 288),
+
+  /* SASL authorization identity */
+  CURLOPT(CURLOPT_SASL_AUTHZID, CURLOPTTYPE_STRINGPOINT, 289),
+
+  /* allow RCPT TO command to fail for some recipients */
+  CURLOPT(CURLOPT_MAIL_RCPT_ALLLOWFAILS, CURLOPTTYPE_LONG, 290),
+
+  /* the private SSL-certificate as a "blob" */
+  CURLOPT(CURLOPT_SSLCERT_BLOB, CURLOPTTYPE_BLOB, 291),
+  CURLOPT(CURLOPT_SSLKEY_BLOB, CURLOPTTYPE_BLOB, 292),
+  CURLOPT(CURLOPT_PROXY_SSLCERT_BLOB, CURLOPTTYPE_BLOB, 293),
+  CURLOPT(CURLOPT_PROXY_SSLKEY_BLOB, CURLOPTTYPE_BLOB, 294),
+  CURLOPT(CURLOPT_ISSUERCERT_BLOB, CURLOPTTYPE_BLOB, 295),
+
+  /* Issuer certificate for proxy */
+  CURLOPT(CURLOPT_PROXY_ISSUERCERT, CURLOPTTYPE_STRINGPOINT, 296),
+  CURLOPT(CURLOPT_PROXY_ISSUERCERT_BLOB, CURLOPTTYPE_BLOB, 297),
+
+  /* the EC curves requested by the TLS client (RFC 8422, 5.1);
+   * OpenSSL support via 'set_groups'/'set_curves':
+   * https://www.openssl.org/docs/manmaster/man3/SSL_CTX_set1_groups.html
+   */
+  CURLOPT(CURLOPT_SSL_EC_CURVES, CURLOPTTYPE_STRINGPOINT, 298),
+
+  /* HSTS bitmask */
+  CURLOPT(CURLOPT_HSTS_CTRL, CURLOPTTYPE_LONG, 299),
+  /* HSTS file name */
+  CURLOPT(CURLOPT_HSTS, CURLOPTTYPE_STRINGPOINT, 300),
+
+  /* HSTS read callback */
+  CURLOPT(CURLOPT_HSTSREADFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 301),
+  CURLOPT(CURLOPT_HSTSREADDATA, CURLOPTTYPE_CBPOINT, 302),
+
+  /* HSTS write callback */
+  CURLOPT(CURLOPT_HSTSWRITEFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 303),
+  CURLOPT(CURLOPT_HSTSWRITEDATA, CURLOPTTYPE_CBPOINT, 304),
+
+  /* Parameters for V4 signature */
+  CURLOPT(CURLOPT_AWS_SIGV4, CURLOPTTYPE_STRINGPOINT, 305),
+
+  /* Same as CURLOPT_SSL_VERIFYPEER but for DoH (DNS-over-HTTPS) servers. */
+  CURLOPT(CURLOPT_DOH_SSL_VERIFYPEER, CURLOPTTYPE_LONG, 306),
+
+  /* Same as CURLOPT_SSL_VERIFYHOST but for DoH (DNS-over-HTTPS) servers. */
+  CURLOPT(CURLOPT_DOH_SSL_VERIFYHOST, CURLOPTTYPE_LONG, 307),
+
+  /* Same as CURLOPT_SSL_VERIFYSTATUS but for DoH (DNS-over-HTTPS) servers. */
+  CURLOPT(CURLOPT_DOH_SSL_VERIFYSTATUS, CURLOPTTYPE_LONG, 308),
+
+  /* The CA certificates as "blob" used to validate the peer certificate
+     this option is used only if SSL_VERIFYPEER is true */
+  CURLOPT(CURLOPT_CAINFO_BLOB, CURLOPTTYPE_BLOB, 309),
+
+  /* The CA certificates as "blob" used to validate the proxy certificate
+     this option is used only if PROXY_SSL_VERIFYPEER is true */
+  CURLOPT(CURLOPT_PROXY_CAINFO_BLOB, CURLOPTTYPE_BLOB, 310),
+
+  /* used by scp/sftp to verify the host's public key */
+  CURLOPT(CURLOPT_SSH_HOST_PUBLIC_KEY_SHA256, CURLOPTTYPE_STRINGPOINT, 311),
+
+  /* Function that will be called immediately before the initial request
+     is made on a connection (after any protocol negotiation step).  */
+  CURLOPT(CURLOPT_PREREQFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 312),
+
+  /* Data passed to the CURLOPT_PREREQFUNCTION callback */
+  CURLOPT(CURLOPT_PREREQDATA, CURLOPTTYPE_CBPOINT, 313),
+
+  /* maximum age (since creation) of a connection to consider it for reuse
+   * (in seconds) */
+  CURLOPT(CURLOPT_MAXLIFETIME_CONN, CURLOPTTYPE_LONG, 314),
+
+  /* Set MIME option flags. */
+  CURLOPT(CURLOPT_MIME_OPTIONS, CURLOPTTYPE_LONG, 315),
+
+  /* set the SSH host key callback, must point to a curl_sshkeycallback
+     function */
+  CURLOPT(CURLOPT_SSH_HOSTKEYFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 316),
+
+  /* set the SSH host key callback custom pointer */
+  CURLOPT(CURLOPT_SSH_HOSTKEYDATA, CURLOPTTYPE_CBPOINT, 317),
+
+  /* specify which protocols that are allowed to be used for the transfer,
+     which thus helps the app which takes URLs from users or other external
+     inputs and want to restrict what protocol(s) to deal with. Defaults to
+     all built-in protocols. */
+  CURLOPT(CURLOPT_PROTOCOLS_STR, CURLOPTTYPE_STRINGPOINT, 318),
+
+  /* specify which protocols that libcurl is allowed to follow directs to */
+  CURLOPT(CURLOPT_REDIR_PROTOCOLS_STR, CURLOPTTYPE_STRINGPOINT, 319),
+
+  /* websockets options */
+  CURLOPT(CURLOPT_WS_OPTIONS, CURLOPTTYPE_LONG, 320),
+
+  CURLOPT_LASTENTRY /* the last unused */
+} CURLoption;
+
+#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all
+                          the obsolete stuff removed! */
+
+/* Backwards compatibility with older names */
+/* These are scheduled to disappear by 2011 */
+
+/* This was added in version 7.19.1 */
+#define CURLOPT_POST301 CURLOPT_POSTREDIR
+
+/* These are scheduled to disappear by 2009 */
+
+/* The following were added in 7.17.0 */
+#define CURLOPT_SSLKEYPASSWD CURLOPT_KEYPASSWD
+#define CURLOPT_FTPAPPEND CURLOPT_APPEND
+#define CURLOPT_FTPLISTONLY CURLOPT_DIRLISTONLY
+#define CURLOPT_FTP_SSL CURLOPT_USE_SSL
+
+/* The following were added earlier */
+
+#define CURLOPT_SSLCERTPASSWD CURLOPT_KEYPASSWD
+#define CURLOPT_KRB4LEVEL CURLOPT_KRBLEVEL
+
+/* */
+#define CURLOPT_FTP_RESPONSE_TIMEOUT CURLOPT_SERVER_RESPONSE_TIMEOUT
+
+#else
+/* This is set if CURL_NO_OLDIES is defined at compile-time */
+#undef CURLOPT_DNS_USE_GLOBAL_CACHE /* soon obsolete */
+#endif
+
+
+  /* Below here follows defines for the CURLOPT_IPRESOLVE option. If a host
+     name resolves addresses using more than one IP protocol version, this
+     option might be handy to force libcurl to use a specific IP version. */
+#define CURL_IPRESOLVE_WHATEVER 0 /* default, uses addresses to all IP
+                                     versions that your system allows */
+#define CURL_IPRESOLVE_V4       1 /* uses only IPv4 addresses/connections */
+#define CURL_IPRESOLVE_V6       2 /* uses only IPv6 addresses/connections */
+
+  /* Convenient "aliases" */
+#define CURLOPT_RTSPHEADER CURLOPT_HTTPHEADER
+
+  /* These enums are for use with the CURLOPT_HTTP_VERSION option. */
+enum {
+  CURL_HTTP_VERSION_NONE, /* setting this means we don't care, and that we'd
+                             like the library to choose the best possible
+                             for us! */
+  CURL_HTTP_VERSION_1_0,  /* please use HTTP 1.0 in the request */
+  CURL_HTTP_VERSION_1_1,  /* please use HTTP 1.1 in the request */
+  CURL_HTTP_VERSION_2_0,  /* please use HTTP 2 in the request */
+  CURL_HTTP_VERSION_2TLS, /* use version 2 for HTTPS, version 1.1 for HTTP */
+  CURL_HTTP_VERSION_2_PRIOR_KNOWLEDGE,  /* please use HTTP 2 without HTTP/1.1
+                                           Upgrade */
+  CURL_HTTP_VERSION_3 = 30, /* Makes use of explicit HTTP/3 without fallback.
+                               Use CURLOPT_ALTSVC to enable HTTP/3 upgrade */
+  CURL_HTTP_VERSION_LAST /* *ILLEGAL* http version */
+};
+
+/* Convenience definition simple because the name of the version is HTTP/2 and
+   not 2.0. The 2_0 version of the enum name was set while the version was
+   still planned to be 2.0 and we stick to it for compatibility. */
+#define CURL_HTTP_VERSION_2 CURL_HTTP_VERSION_2_0
+
+/*
+ * Public API enums for RTSP requests
+ */
+enum {
+    CURL_RTSPREQ_NONE, /* first in list */
+    CURL_RTSPREQ_OPTIONS,
+    CURL_RTSPREQ_DESCRIBE,
+    CURL_RTSPREQ_ANNOUNCE,
+    CURL_RTSPREQ_SETUP,
+    CURL_RTSPREQ_PLAY,
+    CURL_RTSPREQ_PAUSE,
+    CURL_RTSPREQ_TEARDOWN,
+    CURL_RTSPREQ_GET_PARAMETER,
+    CURL_RTSPREQ_SET_PARAMETER,
+    CURL_RTSPREQ_RECORD,
+    CURL_RTSPREQ_RECEIVE,
+    CURL_RTSPREQ_LAST /* last in list */
+};
+
+  /* These enums are for use with the CURLOPT_NETRC option. */
+enum CURL_NETRC_OPTION {
+  CURL_NETRC_IGNORED,     /* The .netrc will never be read.
+                           * This is the default. */
+  CURL_NETRC_OPTIONAL,    /* A user:password in the URL will be preferred
+                           * to one in the .netrc. */
+  CURL_NETRC_REQUIRED,    /* A user:password in the URL will be ignored.
+                           * Unless one is set programmatically, the .netrc
+                           * will be queried. */
+  CURL_NETRC_LAST
+};
+
+enum {
+  CURL_SSLVERSION_DEFAULT,
+  CURL_SSLVERSION_TLSv1, /* TLS 1.x */
+  CURL_SSLVERSION_SSLv2,
+  CURL_SSLVERSION_SSLv3,
+  CURL_SSLVERSION_TLSv1_0,
+  CURL_SSLVERSION_TLSv1_1,
+  CURL_SSLVERSION_TLSv1_2,
+  CURL_SSLVERSION_TLSv1_3,
+
+  CURL_SSLVERSION_LAST /* never use, keep last */
+};
+
+enum {
+  CURL_SSLVERSION_MAX_NONE =     0,
+  CURL_SSLVERSION_MAX_DEFAULT =  (CURL_SSLVERSION_TLSv1   << 16),
+  CURL_SSLVERSION_MAX_TLSv1_0 =  (CURL_SSLVERSION_TLSv1_0 << 16),
+  CURL_SSLVERSION_MAX_TLSv1_1 =  (CURL_SSLVERSION_TLSv1_1 << 16),
+  CURL_SSLVERSION_MAX_TLSv1_2 =  (CURL_SSLVERSION_TLSv1_2 << 16),
+  CURL_SSLVERSION_MAX_TLSv1_3 =  (CURL_SSLVERSION_TLSv1_3 << 16),
+
+  /* never use, keep last */
+  CURL_SSLVERSION_MAX_LAST =     (CURL_SSLVERSION_LAST    << 16)
+};
+
+enum CURL_TLSAUTH {
+  CURL_TLSAUTH_NONE,
+  CURL_TLSAUTH_SRP,
+  CURL_TLSAUTH_LAST /* never use, keep last */
+};
+
+/* symbols to use with CURLOPT_POSTREDIR.
+   CURL_REDIR_POST_301, CURL_REDIR_POST_302 and CURL_REDIR_POST_303
+   can be bitwise ORed so that CURL_REDIR_POST_301 | CURL_REDIR_POST_302
+   | CURL_REDIR_POST_303 == CURL_REDIR_POST_ALL */
+
+#define CURL_REDIR_GET_ALL  0
+#define CURL_REDIR_POST_301 1
+#define CURL_REDIR_POST_302 2
+#define CURL_REDIR_POST_303 4
+#define CURL_REDIR_POST_ALL \
+    (CURL_REDIR_POST_301|CURL_REDIR_POST_302|CURL_REDIR_POST_303)
+
+typedef enum {
+  CURL_TIMECOND_NONE,
+
+  CURL_TIMECOND_IFMODSINCE,
+  CURL_TIMECOND_IFUNMODSINCE,
+  CURL_TIMECOND_LASTMOD,
+
+  CURL_TIMECOND_LAST
+} curl_TimeCond;
+
+/* Special size_t value signaling a null-terminated string. */
+#define CURL_ZERO_TERMINATED ((size_t) -1)
+
+/* curl_strequal() and curl_strnequal() are subject for removal in a future
+   release */
+CURL_EXTERN int curl_strequal(const char *s1, const char *s2);
+CURL_EXTERN int curl_strnequal(const char *s1, const char *s2, size_t n);
+
+/* Mime/form handling support. */
+typedef struct curl_mime      curl_mime;      /* Mime context. */
+typedef struct curl_mimepart  curl_mimepart;  /* Mime part context. */
+
+/* CURLMIMEOPT_ defines are for the CURLOPT_MIME_OPTIONS option. */
+#define CURLMIMEOPT_FORMESCAPE  (1<<0) /* Use backslash-escaping for forms. */
+
+/*
+ * NAME curl_mime_init()
+ *
+ * DESCRIPTION
+ *
+ * Create a mime context and return its handle. The easy parameter is the
+ * target handle.
+ */
+CURL_EXTERN curl_mime *curl_mime_init(CURL *easy);
+
+/*
+ * NAME curl_mime_free()
+ *
+ * DESCRIPTION
+ *
+ * release a mime handle and its substructures.
+ */
+CURL_EXTERN void curl_mime_free(curl_mime *mime);
+
+/*
+ * NAME curl_mime_addpart()
+ *
+ * DESCRIPTION
+ *
+ * Append a new empty part to the given mime context and return a handle to
+ * the created part.
+ */
+CURL_EXTERN curl_mimepart *curl_mime_addpart(curl_mime *mime);
+
+/*
+ * NAME curl_mime_name()
+ *
+ * DESCRIPTION
+ *
+ * Set mime/form part name.
+ */
+CURL_EXTERN CURLcode curl_mime_name(curl_mimepart *part, const char *name);
+
+/*
+ * NAME curl_mime_filename()
+ *
+ * DESCRIPTION
+ *
+ * Set mime part remote file name.
+ */
+CURL_EXTERN CURLcode curl_mime_filename(curl_mimepart *part,
+                                        const char *filename);
+
+/*
+ * NAME curl_mime_type()
+ *
+ * DESCRIPTION
+ *
+ * Set mime part type.
+ */
+CURL_EXTERN CURLcode curl_mime_type(curl_mimepart *part, const char *mimetype);
+
+/*
+ * NAME curl_mime_encoder()
+ *
+ * DESCRIPTION
+ *
+ * Set mime data transfer encoder.
+ */
+CURL_EXTERN CURLcode curl_mime_encoder(curl_mimepart *part,
+                                       const char *encoding);
+
+/*
+ * NAME curl_mime_data()
+ *
+ * DESCRIPTION
+ *
+ * Set mime part data source from memory data,
+ */
+CURL_EXTERN CURLcode curl_mime_data(curl_mimepart *part,
+                                    const char *data, size_t datasize);
+
+/*
+ * NAME curl_mime_filedata()
+ *
+ * DESCRIPTION
+ *
+ * Set mime part data source from named file.
+ */
+CURL_EXTERN CURLcode curl_mime_filedata(curl_mimepart *part,
+                                        const char *filename);
+
+/*
+ * NAME curl_mime_data_cb()
+ *
+ * DESCRIPTION
+ *
+ * Set mime part data source from callback function.
+ */
+CURL_EXTERN CURLcode curl_mime_data_cb(curl_mimepart *part,
+                                       curl_off_t datasize,
+                                       curl_read_callback readfunc,
+                                       curl_seek_callback seekfunc,
+                                       curl_free_callback freefunc,
+                                       void *arg);
+
+/*
+ * NAME curl_mime_subparts()
+ *
+ * DESCRIPTION
+ *
+ * Set mime part data source from subparts.
+ */
+CURL_EXTERN CURLcode curl_mime_subparts(curl_mimepart *part,
+                                        curl_mime *subparts);
+/*
+ * NAME curl_mime_headers()
+ *
+ * DESCRIPTION
+ *
+ * Set mime part headers.
+ */
+CURL_EXTERN CURLcode curl_mime_headers(curl_mimepart *part,
+                                       struct curl_slist *headers,
+                                       int take_ownership);
+
+typedef enum {
+  CURLFORM_NOTHING,        /********* the first one is unused ************/
+  CURLFORM_COPYNAME,
+  CURLFORM_PTRNAME,
+  CURLFORM_NAMELENGTH,
+  CURLFORM_COPYCONTENTS,
+  CURLFORM_PTRCONTENTS,
+  CURLFORM_CONTENTSLENGTH,
+  CURLFORM_FILECONTENT,
+  CURLFORM_ARRAY,
+  CURLFORM_OBSOLETE,
+  CURLFORM_FILE,
+
+  CURLFORM_BUFFER,
+  CURLFORM_BUFFERPTR,
+  CURLFORM_BUFFERLENGTH,
+
+  CURLFORM_CONTENTTYPE,
+  CURLFORM_CONTENTHEADER,
+  CURLFORM_FILENAME,
+  CURLFORM_END,
+  CURLFORM_OBSOLETE2,
+
+  CURLFORM_STREAM,
+  CURLFORM_CONTENTLEN, /* added in 7.46.0, provide a curl_off_t length */
+
+  CURLFORM_LASTENTRY /* the last unused */
+} CURLformoption;
+
+/* structure to be used as parameter for CURLFORM_ARRAY */
+struct curl_forms {
+  CURLformoption option;
+  const char     *value;
+};
+
+/* use this for multipart formpost building */
+/* Returns code for curl_formadd()
+ *
+ * Returns:
+ * CURL_FORMADD_OK             on success
+ * CURL_FORMADD_MEMORY         if the FormInfo allocation fails
+ * CURL_FORMADD_OPTION_TWICE   if one option is given twice for one Form
+ * CURL_FORMADD_NULL           if a null pointer was given for a char
+ * CURL_FORMADD_MEMORY         if the allocation of a FormInfo struct failed
+ * CURL_FORMADD_UNKNOWN_OPTION if an unknown option was used
+ * CURL_FORMADD_INCOMPLETE     if the some FormInfo is not complete (or error)
+ * CURL_FORMADD_MEMORY         if a curl_httppost struct cannot be allocated
+ * CURL_FORMADD_MEMORY         if some allocation for string copying failed.
+ * CURL_FORMADD_ILLEGAL_ARRAY  if an illegal option is used in an array
+ *
+ ***************************************************************************/
+typedef enum {
+  CURL_FORMADD_OK, /* first, no error */
+
+  CURL_FORMADD_MEMORY,
+  CURL_FORMADD_OPTION_TWICE,
+  CURL_FORMADD_NULL,
+  CURL_FORMADD_UNKNOWN_OPTION,
+  CURL_FORMADD_INCOMPLETE,
+  CURL_FORMADD_ILLEGAL_ARRAY,
+  CURL_FORMADD_DISABLED, /* libcurl was built with this disabled */
+
+  CURL_FORMADD_LAST /* last */
+} CURLFORMcode;
+
+/*
+ * NAME curl_formadd()
+ *
+ * DESCRIPTION
+ *
+ * Pretty advanced function for building multi-part formposts. Each invoke
+ * adds one part that together construct a full post. Then use
+ * CURLOPT_HTTPPOST to send it off to libcurl.
+ */
+CURL_EXTERN CURLFORMcode curl_formadd(struct curl_httppost **httppost,
+                                      struct curl_httppost **last_post,
+                                      ...);
+
+/*
+ * callback function for curl_formget()
+ * The void *arg pointer will be the one passed as second argument to
+ *   curl_formget().
+ * The character buffer passed to it must not be freed.
+ * Should return the buffer length passed to it as the argument "len" on
+ *   success.
+ */
+typedef size_t (*curl_formget_callback)(void *arg, const char *buf,
+                                        size_t len);
+
+/*
+ * NAME curl_formget()
+ *
+ * DESCRIPTION
+ *
+ * Serialize a curl_httppost struct built with curl_formadd().
+ * Accepts a void pointer as second argument which will be passed to
+ * the curl_formget_callback function.
+ * Returns 0 on success.
+ */
+CURL_EXTERN int curl_formget(struct curl_httppost *form, void *arg,
+                             curl_formget_callback append);
+/*
+ * NAME curl_formfree()
+ *
+ * DESCRIPTION
+ *
+ * Free a multipart formpost previously built with curl_formadd().
+ */
+CURL_EXTERN void curl_formfree(struct curl_httppost *form);
+
+/*
+ * NAME curl_getenv()
+ *
+ * DESCRIPTION
+ *
+ * Returns a malloc()'ed string that MUST be curl_free()ed after usage is
+ * complete. DEPRECATED - see lib/README.curlx
+ */
+CURL_EXTERN char *curl_getenv(const char *variable);
+
+/*
+ * NAME curl_version()
+ *
+ * DESCRIPTION
+ *
+ * Returns a static ascii string of the libcurl version.
+ */
+CURL_EXTERN char *curl_version(void);
+
+/*
+ * NAME curl_easy_escape()
+ *
+ * DESCRIPTION
+ *
+ * Escapes URL strings (converts all letters consider illegal in URLs to their
+ * %XX versions). This function returns a new allocated string or NULL if an
+ * error occurred.
+ */
+CURL_EXTERN char *curl_easy_escape(CURL *handle,
+                                   const char *string,
+                                   int length);
+
+/* the previous version: */
+CURL_EXTERN char *curl_escape(const char *string,
+                              int length);
+
+
+/*
+ * NAME curl_easy_unescape()
+ *
+ * DESCRIPTION
+ *
+ * Unescapes URL encoding in strings (converts all %XX codes to their 8bit
+ * versions). This function returns a new allocated string or NULL if an error
+ * occurred.
+ * Conversion Note: On non-ASCII platforms the ASCII %XX codes are
+ * converted into the host encoding.
+ */
+CURL_EXTERN char *curl_easy_unescape(CURL *handle,
+                                     const char *string,
+                                     int length,
+                                     int *outlength);
+
+/* the previous version */
+CURL_EXTERN char *curl_unescape(const char *string,
+                                int length);
+
+/*
+ * NAME curl_free()
+ *
+ * DESCRIPTION
+ *
+ * Provided for de-allocation in the same translation unit that did the
+ * allocation. Added in libcurl 7.10
+ */
+CURL_EXTERN void curl_free(void *p);
+
+/*
+ * NAME curl_global_init()
+ *
+ * DESCRIPTION
+ *
+ * curl_global_init() should be invoked exactly once for each application that
+ * uses libcurl and before any call of other libcurl functions.
+
+ * This function is thread-safe if CURL_VERSION_THREADSAFE is set in the
+ * curl_version_info_data.features flag (fetch by curl_version_info()).
+
+ */
+CURL_EXTERN CURLcode curl_global_init(long flags);
+
+/*
+ * NAME curl_global_init_mem()
+ *
+ * DESCRIPTION
+ *
+ * curl_global_init() or curl_global_init_mem() should be invoked exactly once
+ * for each application that uses libcurl.  This function can be used to
+ * initialize libcurl and set user defined memory management callback
+ * functions.  Users can implement memory management routines to check for
+ * memory leaks, check for mis-use of the curl library etc.  User registered
+ * callback routines will be invoked by this library instead of the system
+ * memory management routines like malloc, free etc.
+ */
+CURL_EXTERN CURLcode curl_global_init_mem(long flags,
+                                          curl_malloc_callback m,
+                                          curl_free_callback f,
+                                          curl_realloc_callback r,
+                                          curl_strdup_callback s,
+                                          curl_calloc_callback c);
+
+/*
+ * NAME curl_global_cleanup()
+ *
+ * DESCRIPTION
+ *
+ * curl_global_cleanup() should be invoked exactly once for each application
+ * that uses libcurl
+ */
+CURL_EXTERN void curl_global_cleanup(void);
+
+/* linked-list structure for the CURLOPT_QUOTE option (and other) */
+struct curl_slist {
+  char *data;
+  struct curl_slist *next;
+};
+
+/*
+ * NAME curl_global_sslset()
+ *
+ * DESCRIPTION
+ *
+ * When built with multiple SSL backends, curl_global_sslset() allows to
+ * choose one. This function can only be called once, and it must be called
+ * *before* curl_global_init().
+ *
+ * The backend can be identified by the id (e.g. CURLSSLBACKEND_OPENSSL). The
+ * backend can also be specified via the name parameter (passing -1 as id).
+ * If both id and name are specified, the name will be ignored. If neither id
+ * nor name are specified, the function will fail with
+ * CURLSSLSET_UNKNOWN_BACKEND and set the "avail" pointer to the
+ * NULL-terminated list of available backends.
+ *
+ * Upon success, the function returns CURLSSLSET_OK.
+ *
+ * If the specified SSL backend is not available, the function returns
+ * CURLSSLSET_UNKNOWN_BACKEND and sets the "avail" pointer to a NULL-terminated
+ * list of available SSL backends.
+ *
+ * The SSL backend can be set only once. If it has already been set, a
+ * subsequent attempt to change it will result in a CURLSSLSET_TOO_LATE.
+ */
+
+struct curl_ssl_backend {
+  curl_sslbackend id;
+  const char *name;
+};
+typedef struct curl_ssl_backend curl_ssl_backend;
+
+typedef enum {
+  CURLSSLSET_OK = 0,
+  CURLSSLSET_UNKNOWN_BACKEND,
+  CURLSSLSET_TOO_LATE,
+  CURLSSLSET_NO_BACKENDS /* libcurl was built without any SSL support */
+} CURLsslset;
+
+CURL_EXTERN CURLsslset curl_global_sslset(curl_sslbackend id, const char *name,
+                                          const curl_ssl_backend ***avail);
+
+/*
+ * NAME curl_slist_append()
+ *
+ * DESCRIPTION
+ *
+ * Appends a string to a linked list. If no list exists, it will be created
+ * first. Returns the new list, after appending.
+ */
+CURL_EXTERN struct curl_slist *curl_slist_append(struct curl_slist *,
+                                                 const char *);
+
+/*
+ * NAME curl_slist_free_all()
+ *
+ * DESCRIPTION
+ *
+ * free a previously built curl_slist.
+ */
+CURL_EXTERN void curl_slist_free_all(struct curl_slist *);
+
+/*
+ * NAME curl_getdate()
+ *
+ * DESCRIPTION
+ *
+ * Returns the time, in seconds since 1 Jan 1970 of the time string given in
+ * the first argument. The time argument in the second parameter is unused
+ * and should be set to NULL.
+ */
+CURL_EXTERN time_t curl_getdate(const char *p, const time_t *unused);
+
+/* info about the certificate chain, only for OpenSSL, GnuTLS, Schannel, NSS
+   and GSKit builds. Asked for with CURLOPT_CERTINFO / CURLINFO_CERTINFO */
+struct curl_certinfo {
+  int num_of_certs;             /* number of certificates with information */
+  struct curl_slist **certinfo; /* for each index in this array, there's a
+                                   linked list with textual information in the
+                                   format "name: value" */
+};
+
+/* Information about the SSL library used and the respective internal SSL
+   handle, which can be used to obtain further information regarding the
+   connection. Asked for with CURLINFO_TLS_SSL_PTR or CURLINFO_TLS_SESSION. */
+struct curl_tlssessioninfo {
+  curl_sslbackend backend;
+  void *internals;
+};
+
+#define CURLINFO_STRING   0x100000
+#define CURLINFO_LONG     0x200000
+#define CURLINFO_DOUBLE   0x300000
+#define CURLINFO_SLIST    0x400000
+#define CURLINFO_PTR      0x400000 /* same as SLIST */
+#define CURLINFO_SOCKET   0x500000
+#define CURLINFO_OFF_T    0x600000
+#define CURLINFO_MASK     0x0fffff
+#define CURLINFO_TYPEMASK 0xf00000
+
+typedef enum {
+  CURLINFO_NONE, /* first, never use this */
+  CURLINFO_EFFECTIVE_URL    = CURLINFO_STRING + 1,
+  CURLINFO_RESPONSE_CODE    = CURLINFO_LONG   + 2,
+  CURLINFO_TOTAL_TIME       = CURLINFO_DOUBLE + 3,
+  CURLINFO_NAMELOOKUP_TIME  = CURLINFO_DOUBLE + 4,
+  CURLINFO_CONNECT_TIME     = CURLINFO_DOUBLE + 5,
+  CURLINFO_PRETRANSFER_TIME = CURLINFO_DOUBLE + 6,
+  CURLINFO_SIZE_UPLOAD      = CURLINFO_DOUBLE + 7,
+  CURLINFO_SIZE_UPLOAD_T    = CURLINFO_OFF_T  + 7,
+  CURLINFO_SIZE_DOWNLOAD    = CURLINFO_DOUBLE + 8,
+  CURLINFO_SIZE_DOWNLOAD_T  = CURLINFO_OFF_T  + 8,
+  CURLINFO_SPEED_DOWNLOAD   = CURLINFO_DOUBLE + 9,
+  CURLINFO_SPEED_DOWNLOAD_T = CURLINFO_OFF_T  + 9,
+  CURLINFO_SPEED_UPLOAD     = CURLINFO_DOUBLE + 10,
+  CURLINFO_SPEED_UPLOAD_T   = CURLINFO_OFF_T  + 10,
+  CURLINFO_HEADER_SIZE      = CURLINFO_LONG   + 11,
+  CURLINFO_REQUEST_SIZE     = CURLINFO_LONG   + 12,
+  CURLINFO_SSL_VERIFYRESULT = CURLINFO_LONG   + 13,
+  CURLINFO_FILETIME         = CURLINFO_LONG   + 14,
+  CURLINFO_FILETIME_T       = CURLINFO_OFF_T  + 14,
+  CURLINFO_CONTENT_LENGTH_DOWNLOAD   = CURLINFO_DOUBLE + 15,
+  CURLINFO_CONTENT_LENGTH_DOWNLOAD_T = CURLINFO_OFF_T  + 15,
+  CURLINFO_CONTENT_LENGTH_UPLOAD     = CURLINFO_DOUBLE + 16,
+  CURLINFO_CONTENT_LENGTH_UPLOAD_T   = CURLINFO_OFF_T  + 16,
+  CURLINFO_STARTTRANSFER_TIME = CURLINFO_DOUBLE + 17,
+  CURLINFO_CONTENT_TYPE     = CURLINFO_STRING + 18,
+  CURLINFO_REDIRECT_TIME    = CURLINFO_DOUBLE + 19,
+  CURLINFO_REDIRECT_COUNT   = CURLINFO_LONG   + 20,
+  CURLINFO_PRIVATE          = CURLINFO_STRING + 21,
+  CURLINFO_HTTP_CONNECTCODE = CURLINFO_LONG   + 22,
+  CURLINFO_HTTPAUTH_AVAIL   = CURLINFO_LONG   + 23,
+  CURLINFO_PROXYAUTH_AVAIL  = CURLINFO_LONG   + 24,
+  CURLINFO_OS_ERRNO         = CURLINFO_LONG   + 25,
+  CURLINFO_NUM_CONNECTS     = CURLINFO_LONG   + 26,
+  CURLINFO_SSL_ENGINES      = CURLINFO_SLIST  + 27,
+  CURLINFO_COOKIELIST       = CURLINFO_SLIST  + 28,
+  CURLINFO_LASTSOCKET       = CURLINFO_LONG   + 29,
+  CURLINFO_FTP_ENTRY_PATH   = CURLINFO_STRING + 30,
+  CURLINFO_REDIRECT_URL     = CURLINFO_STRING + 31,
+  CURLINFO_PRIMARY_IP       = CURLINFO_STRING + 32,
+  CURLINFO_APPCONNECT_TIME  = CURLINFO_DOUBLE + 33,
+  CURLINFO_CERTINFO         = CURLINFO_PTR    + 34,
+  CURLINFO_CONDITION_UNMET  = CURLINFO_LONG   + 35,
+  CURLINFO_RTSP_SESSION_ID  = CURLINFO_STRING + 36,
+  CURLINFO_RTSP_CLIENT_CSEQ = CURLINFO_LONG   + 37,
+  CURLINFO_RTSP_SERVER_CSEQ = CURLINFO_LONG   + 38,
+  CURLINFO_RTSP_CSEQ_RECV   = CURLINFO_LONG   + 39,
+  CURLINFO_PRIMARY_PORT     = CURLINFO_LONG   + 40,
+  CURLINFO_LOCAL_IP         = CURLINFO_STRING + 41,
+  CURLINFO_LOCAL_PORT       = CURLINFO_LONG   + 42,
+  CURLINFO_TLS_SESSION      = CURLINFO_PTR    + 43,
+  CURLINFO_ACTIVESOCKET     = CURLINFO_SOCKET + 44,
+  CURLINFO_TLS_SSL_PTR      = CURLINFO_PTR    + 45,
+  CURLINFO_HTTP_VERSION     = CURLINFO_LONG   + 46,
+  CURLINFO_PROXY_SSL_VERIFYRESULT = CURLINFO_LONG + 47,
+  CURLINFO_PROTOCOL         = CURLINFO_LONG   + 48,
+  CURLINFO_SCHEME           = CURLINFO_STRING + 49,
+  CURLINFO_TOTAL_TIME_T     = CURLINFO_OFF_T + 50,
+  CURLINFO_NAMELOOKUP_TIME_T = CURLINFO_OFF_T + 51,
+  CURLINFO_CONNECT_TIME_T   = CURLINFO_OFF_T + 52,
+  CURLINFO_PRETRANSFER_TIME_T = CURLINFO_OFF_T + 53,
+  CURLINFO_STARTTRANSFER_TIME_T = CURLINFO_OFF_T + 54,
+  CURLINFO_REDIRECT_TIME_T  = CURLINFO_OFF_T + 55,
+  CURLINFO_APPCONNECT_TIME_T = CURLINFO_OFF_T + 56,
+  CURLINFO_RETRY_AFTER      = CURLINFO_OFF_T + 57,
+  CURLINFO_EFFECTIVE_METHOD = CURLINFO_STRING + 58,
+  CURLINFO_PROXY_ERROR      = CURLINFO_LONG + 59,
+  CURLINFO_REFERER          = CURLINFO_STRING + 60,
+  CURLINFO_CAINFO           = CURLINFO_STRING + 61,
+  CURLINFO_CAPATH           = CURLINFO_STRING + 62,
+  CURLINFO_LASTONE          = 62
+} CURLINFO;
+
+/* CURLINFO_RESPONSE_CODE is the new name for the option previously known as
+   CURLINFO_HTTP_CODE */
+#define CURLINFO_HTTP_CODE CURLINFO_RESPONSE_CODE
+
+typedef enum {
+  CURLCLOSEPOLICY_NONE, /* first, never use this */
+
+  CURLCLOSEPOLICY_OLDEST,
+  CURLCLOSEPOLICY_LEAST_RECENTLY_USED,
+  CURLCLOSEPOLICY_LEAST_TRAFFIC,
+  CURLCLOSEPOLICY_SLOWEST,
+  CURLCLOSEPOLICY_CALLBACK,
+
+  CURLCLOSEPOLICY_LAST /* last, never use this */
+} curl_closepolicy;
+
+#define CURL_GLOBAL_SSL (1<<0) /* no purpose since 7.57.0 */
+#define CURL_GLOBAL_WIN32 (1<<1)
+#define CURL_GLOBAL_ALL (CURL_GLOBAL_SSL|CURL_GLOBAL_WIN32)
+#define CURL_GLOBAL_NOTHING 0
+#define CURL_GLOBAL_DEFAULT CURL_GLOBAL_ALL
+#define CURL_GLOBAL_ACK_EINTR (1<<2)
+
+
+/*****************************************************************************
+ * Setup defines, protos etc for the sharing stuff.
+ */
+
+/* Different data locks for a single share */
+typedef enum {
+  CURL_LOCK_DATA_NONE = 0,
+  /*  CURL_LOCK_DATA_SHARE is used internally to say that
+   *  the locking is just made to change the internal state of the share
+   *  itself.
+   */
+  CURL_LOCK_DATA_SHARE,
+  CURL_LOCK_DATA_COOKIE,
+  CURL_LOCK_DATA_DNS,
+  CURL_LOCK_DATA_SSL_SESSION,
+  CURL_LOCK_DATA_CONNECT,
+  CURL_LOCK_DATA_PSL,
+  CURL_LOCK_DATA_LAST
+} curl_lock_data;
+
+/* Different lock access types */
+typedef enum {
+  CURL_LOCK_ACCESS_NONE = 0,   /* unspecified action */
+  CURL_LOCK_ACCESS_SHARED = 1, /* for read perhaps */
+  CURL_LOCK_ACCESS_SINGLE = 2, /* for write perhaps */
+  CURL_LOCK_ACCESS_LAST        /* never use */
+} curl_lock_access;
+
+typedef void (*curl_lock_function)(CURL *handle,
+                                   curl_lock_data data,
+                                   curl_lock_access locktype,
+                                   void *userptr);
+typedef void (*curl_unlock_function)(CURL *handle,
+                                     curl_lock_data data,
+                                     void *userptr);
+
+
+typedef enum {
+  CURLSHE_OK,  /* all is fine */
+  CURLSHE_BAD_OPTION, /* 1 */
+  CURLSHE_IN_USE,     /* 2 */
+  CURLSHE_INVALID,    /* 3 */
+  CURLSHE_NOMEM,      /* 4 out of memory */
+  CURLSHE_NOT_BUILT_IN, /* 5 feature not present in lib */
+  CURLSHE_LAST        /* never use */
+} CURLSHcode;
+
+typedef enum {
+  CURLSHOPT_NONE,  /* don't use */
+  CURLSHOPT_SHARE,   /* specify a data type to share */
+  CURLSHOPT_UNSHARE, /* specify which data type to stop sharing */
+  CURLSHOPT_LOCKFUNC,   /* pass in a 'curl_lock_function' pointer */
+  CURLSHOPT_UNLOCKFUNC, /* pass in a 'curl_unlock_function' pointer */
+  CURLSHOPT_USERDATA,   /* pass in a user data pointer used in the lock/unlock
+                           callback functions */
+  CURLSHOPT_LAST  /* never use */
+} CURLSHoption;
+
+CURL_EXTERN CURLSH *curl_share_init(void);
+CURL_EXTERN CURLSHcode curl_share_setopt(CURLSH *, CURLSHoption option, ...);
+CURL_EXTERN CURLSHcode curl_share_cleanup(CURLSH *);
+
+/****************************************************************************
+ * Structures for querying information about the curl library at runtime.
+ */
+
+typedef enum {
+  CURLVERSION_FIRST,
+  CURLVERSION_SECOND,
+  CURLVERSION_THIRD,
+  CURLVERSION_FOURTH,
+  CURLVERSION_FIFTH,
+  CURLVERSION_SIXTH,
+  CURLVERSION_SEVENTH,
+  CURLVERSION_EIGHTH,
+  CURLVERSION_NINTH,
+  CURLVERSION_TENTH,
+  CURLVERSION_LAST /* never actually use this */
+} CURLversion;
+
+/* The 'CURLVERSION_NOW' is the symbolic name meant to be used by
+   basically all programs ever that want to get version information. It is
+   meant to be a built-in version number for what kind of struct the caller
+   expects. If the struct ever changes, we redefine the NOW to another enum
+   from above. */
+#define CURLVERSION_NOW CURLVERSION_TENTH
+
+struct curl_version_info_data {
+  CURLversion age;          /* age of the returned struct */
+  const char *version;      /* LIBCURL_VERSION */
+  unsigned int version_num; /* LIBCURL_VERSION_NUM */
+  const char *host;         /* OS/host/cpu/machine when configured */
+  int features;             /* bitmask, see defines below */
+  const char *ssl_version;  /* human readable string */
+  long ssl_version_num;     /* not used anymore, always 0 */
+  const char *libz_version; /* human readable string */
+  /* protocols is terminated by an entry with a NULL protoname */
+  const char * const *protocols;
+
+  /* The fields below this were added in CURLVERSION_SECOND */
+  const char *ares;
+  int ares_num;
+
+  /* This field was added in CURLVERSION_THIRD */
+  const char *libidn;
+
+  /* These field were added in CURLVERSION_FOURTH */
+
+  /* Same as '_libiconv_version' if built with HAVE_ICONV */
+  int iconv_ver_num;
+
+  const char *libssh_version; /* human readable string */
+
+  /* These fields were added in CURLVERSION_FIFTH */
+  unsigned int brotli_ver_num; /* Numeric Brotli version
+                                  (MAJOR << 24) | (MINOR << 12) | PATCH */
+  const char *brotli_version; /* human readable string. */
+
+  /* These fields were added in CURLVERSION_SIXTH */
+  unsigned int nghttp2_ver_num; /* Numeric nghttp2 version
+                                   (MAJOR << 16) | (MINOR << 8) | PATCH */
+  const char *nghttp2_version; /* human readable string. */
+  const char *quic_version;    /* human readable quic (+ HTTP/3) library +
+                                  version or NULL */
+
+  /* These fields were added in CURLVERSION_SEVENTH */
+  const char *cainfo;          /* the built-in default CURLOPT_CAINFO, might
+                                  be NULL */
+  const char *capath;          /* the built-in default CURLOPT_CAPATH, might
+                                  be NULL */
+
+  /* These fields were added in CURLVERSION_EIGHTH */
+  unsigned int zstd_ver_num; /* Numeric Zstd version
+                                  (MAJOR << 24) | (MINOR << 12) | PATCH */
+  const char *zstd_version; /* human readable string. */
+
+  /* These fields were added in CURLVERSION_NINTH */
+  const char *hyper_version; /* human readable string. */
+
+  /* These fields were added in CURLVERSION_TENTH */
+  const char *gsasl_version; /* human readable string. */
+};
+typedef struct curl_version_info_data curl_version_info_data;
+
+#define CURL_VERSION_IPV6         (1<<0)  /* IPv6-enabled */
+#define CURL_VERSION_KERBEROS4    (1<<1)  /* Kerberos V4 auth is supported
+                                             (deprecated) */
+#define CURL_VERSION_SSL          (1<<2)  /* SSL options are present */
+#define CURL_VERSION_LIBZ         (1<<3)  /* libz features are present */
+#define CURL_VERSION_NTLM         (1<<4)  /* NTLM auth is supported */
+#define CURL_VERSION_GSSNEGOTIATE (1<<5)  /* Negotiate auth is supported
+                                             (deprecated) */
+#define CURL_VERSION_DEBUG        (1<<6)  /* Built with debug capabilities */
+#define CURL_VERSION_ASYNCHDNS    (1<<7)  /* Asynchronous DNS resolves */
+#define CURL_VERSION_SPNEGO       (1<<8)  /* SPNEGO auth is supported */
+#define CURL_VERSION_LARGEFILE    (1<<9)  /* Supports files larger than 2GB */
+#define CURL_VERSION_IDN          (1<<10) /* Internationized Domain Names are
+                                             supported */
+#define CURL_VERSION_SSPI         (1<<11) /* Built against Windows SSPI */
+#define CURL_VERSION_CONV         (1<<12) /* Character conversions supported */
+#define CURL_VERSION_CURLDEBUG    (1<<13) /* Debug memory tracking supported */
+#define CURL_VERSION_TLSAUTH_SRP  (1<<14) /* TLS-SRP auth is supported */
+#define CURL_VERSION_NTLM_WB      (1<<15) /* NTLM delegation to winbind helper
+                                             is supported */
+#define CURL_VERSION_HTTP2        (1<<16) /* HTTP2 support built-in */
+#define CURL_VERSION_GSSAPI       (1<<17) /* Built against a GSS-API library */
+#define CURL_VERSION_KERBEROS5    (1<<18) /* Kerberos V5 auth is supported */
+#define CURL_VERSION_UNIX_SOCKETS (1<<19) /* Unix domain sockets support */
+#define CURL_VERSION_PSL          (1<<20) /* Mozilla's Public Suffix List, used
+                                             for cookie domain verification */
+#define CURL_VERSION_HTTPS_PROXY  (1<<21) /* HTTPS-proxy support built-in */
+#define CURL_VERSION_MULTI_SSL    (1<<22) /* Multiple SSL backends available */
+#define CURL_VERSION_BROTLI       (1<<23) /* Brotli features are present. */
+#define CURL_VERSION_ALTSVC       (1<<24) /* Alt-Svc handling built-in */
+#define CURL_VERSION_HTTP3        (1<<25) /* HTTP3 support built-in */
+#define CURL_VERSION_ZSTD         (1<<26) /* zstd features are present */
+#define CURL_VERSION_UNICODE      (1<<27) /* Unicode support on Windows */
+#define CURL_VERSION_HSTS         (1<<28) /* HSTS is supported */
+#define CURL_VERSION_GSASL        (1<<29) /* libgsasl is supported */
+#define CURL_VERSION_THREADSAFE   (1<<30) /* libcurl API is thread-safe */
+
+ /*
+ * NAME curl_version_info()
+ *
+ * DESCRIPTION
+ *
+ * This function returns a pointer to a static copy of the version info
+ * struct. See above.
+ */
+CURL_EXTERN curl_version_info_data *curl_version_info(CURLversion);
+
+/*
+ * NAME curl_easy_strerror()
+ *
+ * DESCRIPTION
+ *
+ * The curl_easy_strerror function may be used to turn a CURLcode value
+ * into the equivalent human readable error string.  This is useful
+ * for printing meaningful error messages.
+ */
+CURL_EXTERN const char *curl_easy_strerror(CURLcode);
+
+/*
+ * NAME curl_share_strerror()
+ *
+ * DESCRIPTION
+ *
+ * The curl_share_strerror function may be used to turn a CURLSHcode value
+ * into the equivalent human readable error string.  This is useful
+ * for printing meaningful error messages.
+ */
+CURL_EXTERN const char *curl_share_strerror(CURLSHcode);
+
+/*
+ * NAME curl_easy_pause()
+ *
+ * DESCRIPTION
+ *
+ * The curl_easy_pause function pauses or unpauses transfers. Select the new
+ * state by setting the bitmask, use the convenience defines below.
+ *
+ */
+CURL_EXTERN CURLcode curl_easy_pause(CURL *handle, int bitmask);
+
+#define CURLPAUSE_RECV      (1<<0)
+#define CURLPAUSE_RECV_CONT (0)
+
+#define CURLPAUSE_SEND      (1<<2)
+#define CURLPAUSE_SEND_CONT (0)
+
+#define CURLPAUSE_ALL       (CURLPAUSE_RECV|CURLPAUSE_SEND)
+#define CURLPAUSE_CONT      (CURLPAUSE_RECV_CONT|CURLPAUSE_SEND_CONT)
+
+#ifdef  __cplusplus
+}
+#endif
+
+/* unfortunately, the easy.h and multi.h include files need options and info
+  stuff before they can be included! */
+#include "easy.h" /* nothing in curl is fun without the easy stuff */
+#include "multi.h"
+#include "urlapi.h"
+#include "options.h"
+#include "header.h"
+#include "websockets.h"
+
+/* the typechecker doesn't work in C++ (yet) */
+#if defined(__GNUC__) && defined(__GNUC_MINOR__) && \
+    ((__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3)) && \
+    !defined(__cplusplus) && !defined(CURL_DISABLE_TYPECHECK)
+#include "typecheck-gcc.h"
+#else
+#if defined(__STDC__) && (__STDC__ >= 1)
+/* This preprocessor magic that replaces a call with the exact same call is
+   only done to make sure application authors pass exactly three arguments
+   to these functions. */
+#define curl_easy_setopt(handle,opt,param) curl_easy_setopt(handle,opt,param)
+#define curl_easy_getinfo(handle,info,arg) curl_easy_getinfo(handle,info,arg)
+#define curl_share_setopt(share,opt,param) curl_share_setopt(share,opt,param)
+#define curl_multi_setopt(handle,opt,param) curl_multi_setopt(handle,opt,param)
+#endif /* __STDC__ >= 1 */
+#endif /* gcc >= 4.3 && !__cplusplus */
+
+#endif /* CURLINC_CURL_H */
diff --git a/ap/lib/libcurl/curl-7.86.0/include/curl/curlver.h b/ap/lib/libcurl/curl-7.86.0/include/curl/curlver.h
new file mode 100755
index 0000000..2e7124e
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/curl/curlver.h
@@ -0,0 +1,79 @@
+#ifndef CURLINC_CURLVER_H
+#define CURLINC_CURLVER_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * SPDX-License-Identifier: curl
+ *
+ ***************************************************************************/
+
+/* This header file contains nothing but libcurl version info, generated by
+   a script at release-time. This was made its own header file in 7.11.2 */
+
+/* This is the global package copyright */
+#define LIBCURL_COPYRIGHT "1996 - 2022 Daniel Stenberg, <daniel@haxx.se>."
+
+/* This is the version number of the libcurl package from which this header
+   file origins: */
+#define LIBCURL_VERSION "7.86.0"
+
+/* The numeric version number is also available "in parts" by using these
+   defines: */
+#define LIBCURL_VERSION_MAJOR 7
+#define LIBCURL_VERSION_MINOR 86
+#define LIBCURL_VERSION_PATCH 0
+
+/* This is the numeric version of the libcurl version number, meant for easier
+   parsing and comparisons by programs. The LIBCURL_VERSION_NUM define will
+   always follow this syntax:
+
+         0xXXYYZZ
+
+   Where XX, YY and ZZ are the main version, release and patch numbers in
+   hexadecimal (using 8 bits each). All three numbers are always represented
+   using two digits.  1.2 would appear as "0x010200" while version 9.11.7
+   appears as "0x090b07".
+
+   This 6-digit (24 bits) hexadecimal number does not show pre-release number,
+   and it is always a greater number in a more recent release. It makes
+   comparisons with greater than and less than work.
+
+   Note: This define is the full hex number and _does not_ use the
+   CURL_VERSION_BITS() macro since curl's own configure script greps for it
+   and needs it to contain the full number.
+*/
+#define LIBCURL_VERSION_NUM 0x075600
+
+/*
+ * This is the date and time when the full source package was created. The
+ * timestamp is not stored in git, as the timestamp is properly set in the
+ * tarballs by the maketgz script.
+ *
+ * The format of the date follows this template:
+ *
+ * "2007-11-23"
+ */
+#define LIBCURL_TIMESTAMP "2022-10-26"
+
+#define CURL_VERSION_BITS(x,y,z) ((x)<<16|(y)<<8|(z))
+#define CURL_AT_LEAST_VERSION(x,y,z) \
+  (LIBCURL_VERSION_NUM >= CURL_VERSION_BITS(x, y, z))
+
+#endif /* CURLINC_CURLVER_H */
diff --git a/ap/lib/libcurl/curl-7.86.0/include/curl/easy.h b/ap/lib/libcurl/curl-7.86.0/include/curl/easy.h
new file mode 100755
index 0000000..9c7e63a
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/curl/easy.h
@@ -0,0 +1,125 @@
+#ifndef CURLINC_EASY_H
+#define CURLINC_EASY_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * SPDX-License-Identifier: curl
+ *
+ ***************************************************************************/
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+/* Flag bits in the curl_blob struct: */
+#define CURL_BLOB_COPY   1 /* tell libcurl to copy the data */
+#define CURL_BLOB_NOCOPY 0 /* tell libcurl to NOT copy the data */
+
+struct curl_blob {
+  void *data;
+  size_t len;
+  unsigned int flags; /* bit 0 is defined, the rest are reserved and should be
+                         left zeroes */
+};
+
+CURL_EXTERN CURL *curl_easy_init(void);
+CURL_EXTERN CURLcode curl_easy_setopt(CURL *curl, CURLoption option, ...);
+CURL_EXTERN CURLcode curl_easy_perform(CURL *curl);
+CURL_EXTERN void curl_easy_cleanup(CURL *curl);
+
+/*
+ * NAME curl_easy_getinfo()
+ *
+ * DESCRIPTION
+ *
+ * Request internal information from the curl session with this function.  The
+ * third argument MUST be a pointer to a long, a pointer to a char * or a
+ * pointer to a double (as the documentation describes elsewhere).  The data
+ * pointed to will be filled in accordingly and can be relied upon only if the
+ * function returns CURLE_OK.  This function is intended to get used *AFTER* a
+ * performed transfer, all results from this function are undefined until the
+ * transfer is completed.
+ */
+CURL_EXTERN CURLcode curl_easy_getinfo(CURL *curl, CURLINFO info, ...);
+
+
+/*
+ * NAME curl_easy_duphandle()
+ *
+ * DESCRIPTION
+ *
+ * Creates a new curl session handle with the same options set for the handle
+ * passed in. Duplicating a handle could only be a matter of cloning data and
+ * options, internal state info and things like persistent connections cannot
+ * be transferred. It is useful in multithreaded applications when you can run
+ * curl_easy_duphandle() for each new thread to avoid a series of identical
+ * curl_easy_setopt() invokes in every thread.
+ */
+CURL_EXTERN CURL *curl_easy_duphandle(CURL *curl);
+
+/*
+ * NAME curl_easy_reset()
+ *
+ * DESCRIPTION
+ *
+ * Re-initializes a CURL handle to the default values. This puts back the
+ * handle to the same state as it was in when it was just created.
+ *
+ * It does keep: live connections, the Session ID cache, the DNS cache and the
+ * cookies.
+ */
+CURL_EXTERN void curl_easy_reset(CURL *curl);
+
+/*
+ * NAME curl_easy_recv()
+ *
+ * DESCRIPTION
+ *
+ * Receives data from the connected socket. Use after successful
+ * curl_easy_perform() with CURLOPT_CONNECT_ONLY option.
+ */
+CURL_EXTERN CURLcode curl_easy_recv(CURL *curl, void *buffer, size_t buflen,
+                                    size_t *n);
+
+/*
+ * NAME curl_easy_send()
+ *
+ * DESCRIPTION
+ *
+ * Sends data over the connected socket. Use after successful
+ * curl_easy_perform() with CURLOPT_CONNECT_ONLY option.
+ */
+CURL_EXTERN CURLcode curl_easy_send(CURL *curl, const void *buffer,
+                                    size_t buflen, size_t *n);
+
+
+/*
+ * NAME curl_easy_upkeep()
+ *
+ * DESCRIPTION
+ *
+ * Performs connection upkeep for the given session handle.
+ */
+CURL_EXTERN CURLcode curl_easy_upkeep(CURL *curl);
+
+#ifdef  __cplusplus
+}
+#endif
+
+#endif
diff --git a/ap/lib/libcurl/curl-7.86.0/include/curl/header.h b/ap/lib/libcurl/curl-7.86.0/include/curl/header.h
new file mode 100755
index 0000000..1598c6f
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/curl/header.h
@@ -0,0 +1,74 @@
+#ifndef CURLINC_HEADER_H
+#define CURLINC_HEADER_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 2018 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * SPDX-License-Identifier: curl
+ *
+ ***************************************************************************/
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+struct curl_header {
+  char *name;    /* this might not use the same case */
+  char *value;
+  size_t amount; /* number of headers using this name  */
+  size_t index;  /* ... of this instance, 0 or higher */
+  unsigned int origin; /* see bits below */
+  void *anchor; /* handle privately used by libcurl */
+};
+
+/* 'origin' bits */
+#define CURLH_HEADER    (1<<0) /* plain server header */
+#define CURLH_TRAILER   (1<<1) /* trailers */
+#define CURLH_CONNECT   (1<<2) /* CONNECT headers */
+#define CURLH_1XX       (1<<3) /* 1xx headers */
+#define CURLH_PSEUDO    (1<<4) /* pseudo headers */
+
+typedef enum {
+  CURLHE_OK,
+  CURLHE_BADINDEX,      /* header exists but not with this index */
+  CURLHE_MISSING,       /* no such header exists */
+  CURLHE_NOHEADERS,     /* no headers at all exist (yet) */
+  CURLHE_NOREQUEST,     /* no request with this number was used */
+  CURLHE_OUT_OF_MEMORY, /* out of memory while processing */
+  CURLHE_BAD_ARGUMENT,  /* a function argument was not okay */
+  CURLHE_NOT_BUILT_IN   /* if API was disabled in the build */
+} CURLHcode;
+
+CURL_EXTERN CURLHcode curl_easy_header(CURL *easy,
+                                       const char *name,
+                                       size_t index,
+                                       unsigned int origin,
+                                       int request,
+                                       struct curl_header **hout);
+
+CURL_EXTERN struct curl_header *curl_easy_nextheader(CURL *easy,
+                                                     unsigned int origin,
+                                                     int request,
+                                                     struct curl_header *prev);
+
+#ifdef __cplusplus
+} /* end of extern "C" */
+#endif
+
+#endif /* CURLINC_HEADER_H */
diff --git a/ap/lib/libcurl/curl-7.86.0/include/curl/mprintf.h b/ap/lib/libcurl/curl-7.86.0/include/curl/mprintf.h
new file mode 100755
index 0000000..cb948dc
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/curl/mprintf.h
@@ -0,0 +1,52 @@
+#ifndef CURLINC_MPRINTF_H
+#define CURLINC_MPRINTF_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * SPDX-License-Identifier: curl
+ *
+ ***************************************************************************/
+
+#include <stdarg.h>
+#include <stdio.h> /* needed for FILE */
+#include "curl.h"  /* for CURL_EXTERN */
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+CURL_EXTERN int curl_mprintf(const char *format, ...);
+CURL_EXTERN int curl_mfprintf(FILE *fd, const char *format, ...);
+CURL_EXTERN int curl_msprintf(char *buffer, const char *format, ...);
+CURL_EXTERN int curl_msnprintf(char *buffer, size_t maxlength,
+                               const char *format, ...);
+CURL_EXTERN int curl_mvprintf(const char *format, va_list args);
+CURL_EXTERN int curl_mvfprintf(FILE *fd, const char *format, va_list args);
+CURL_EXTERN int curl_mvsprintf(char *buffer, const char *format, va_list args);
+CURL_EXTERN int curl_mvsnprintf(char *buffer, size_t maxlength,
+                                const char *format, va_list args);
+CURL_EXTERN char *curl_maprintf(const char *format, ...);
+CURL_EXTERN char *curl_mvaprintf(const char *format, va_list args);
+
+#ifdef  __cplusplus
+}
+#endif
+
+#endif /* CURLINC_MPRINTF_H */
diff --git a/ap/lib/libcurl/curl-7.86.0/include/curl/multi.h b/ap/lib/libcurl/curl-7.86.0/include/curl/multi.h
new file mode 100755
index 0000000..2f3ec37
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/curl/multi.h
@@ -0,0 +1,460 @@
+#ifndef CURLINC_MULTI_H
+#define CURLINC_MULTI_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * SPDX-License-Identifier: curl
+ *
+ ***************************************************************************/
+/*
+  This is an "external" header file. Don't give away any internals here!
+
+  GOALS
+
+  o Enable a "pull" interface. The application that uses libcurl decides where
+    and when to ask libcurl to get/send data.
+
+  o Enable multiple simultaneous transfers in the same thread without making it
+    complicated for the application.
+
+  o Enable the application to select() on its own file descriptors and curl's
+    file descriptors simultaneous easily.
+
+*/
+
+/*
+ * This header file should not really need to include "curl.h" since curl.h
+ * itself includes this file and we expect user applications to do #include
+ * <curl/curl.h> without the need for especially including multi.h.
+ *
+ * For some reason we added this include here at one point, and rather than to
+ * break existing (wrongly written) libcurl applications, we leave it as-is
+ * but with this warning attached.
+ */
+#include "curl.h"
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+#if defined(BUILDING_LIBCURL) || defined(CURL_STRICTER)
+typedef struct Curl_multi CURLM;
+#else
+typedef void CURLM;
+#endif
+
+typedef enum {
+  CURLM_CALL_MULTI_PERFORM = -1, /* please call curl_multi_perform() or
+                                    curl_multi_socket*() soon */
+  CURLM_OK,
+  CURLM_BAD_HANDLE,      /* the passed-in handle is not a valid CURLM handle */
+  CURLM_BAD_EASY_HANDLE, /* an easy handle was not good/valid */
+  CURLM_OUT_OF_MEMORY,   /* if you ever get this, you're in deep sh*t */
+  CURLM_INTERNAL_ERROR,  /* this is a libcurl bug */
+  CURLM_BAD_SOCKET,      /* the passed in socket argument did not match */
+  CURLM_UNKNOWN_OPTION,  /* curl_multi_setopt() with unsupported option */
+  CURLM_ADDED_ALREADY,   /* an easy handle already added to a multi handle was
+                            attempted to get added - again */
+  CURLM_RECURSIVE_API_CALL, /* an api function was called from inside a
+                               callback */
+  CURLM_WAKEUP_FAILURE,  /* wakeup is unavailable or failed */
+  CURLM_BAD_FUNCTION_ARGUMENT, /* function called with a bad parameter */
+  CURLM_ABORTED_BY_CALLBACK,
+  CURLM_UNRECOVERABLE_POLL,
+  CURLM_LAST
+} CURLMcode;
+
+/* just to make code nicer when using curl_multi_socket() you can now check
+   for CURLM_CALL_MULTI_SOCKET too in the same style it works for
+   curl_multi_perform() and CURLM_CALL_MULTI_PERFORM */
+#define CURLM_CALL_MULTI_SOCKET CURLM_CALL_MULTI_PERFORM
+
+/* bitmask bits for CURLMOPT_PIPELINING */
+#define CURLPIPE_NOTHING   0L
+#define CURLPIPE_HTTP1     1L
+#define CURLPIPE_MULTIPLEX 2L
+
+typedef enum {
+  CURLMSG_NONE, /* first, not used */
+  CURLMSG_DONE, /* This easy handle has completed. 'result' contains
+                   the CURLcode of the transfer */
+  CURLMSG_LAST /* last, not used */
+} CURLMSG;
+
+struct CURLMsg {
+  CURLMSG msg;       /* what this message means */
+  CURL *easy_handle; /* the handle it concerns */
+  union {
+    void *whatever;    /* message-specific data */
+    CURLcode result;   /* return code for transfer */
+  } data;
+};
+typedef struct CURLMsg CURLMsg;
+
+/* Based on poll(2) structure and values.
+ * We don't use pollfd and POLL* constants explicitly
+ * to cover platforms without poll(). */
+#define CURL_WAIT_POLLIN    0x0001
+#define CURL_WAIT_POLLPRI   0x0002
+#define CURL_WAIT_POLLOUT   0x0004
+
+struct curl_waitfd {
+  curl_socket_t fd;
+  short events;
+  short revents; /* not supported yet */
+};
+
+/*
+ * Name:    curl_multi_init()
+ *
+ * Desc:    initialize multi-style curl usage
+ *
+ * Returns: a new CURLM handle to use in all 'curl_multi' functions.
+ */
+CURL_EXTERN CURLM *curl_multi_init(void);
+
+/*
+ * Name:    curl_multi_add_handle()
+ *
+ * Desc:    add a standard curl handle to the multi stack
+ *
+ * Returns: CURLMcode type, general multi error code.
+ */
+CURL_EXTERN CURLMcode curl_multi_add_handle(CURLM *multi_handle,
+                                            CURL *curl_handle);
+
+ /*
+  * Name:    curl_multi_remove_handle()
+  *
+  * Desc:    removes a curl handle from the multi stack again
+  *
+  * Returns: CURLMcode type, general multi error code.
+  */
+CURL_EXTERN CURLMcode curl_multi_remove_handle(CURLM *multi_handle,
+                                               CURL *curl_handle);
+
+ /*
+  * Name:    curl_multi_fdset()
+  *
+  * Desc:    Ask curl for its fd_set sets. The app can use these to select() or
+  *          poll() on. We want curl_multi_perform() called as soon as one of
+  *          them are ready.
+  *
+  * Returns: CURLMcode type, general multi error code.
+  */
+CURL_EXTERN CURLMcode curl_multi_fdset(CURLM *multi_handle,
+                                       fd_set *read_fd_set,
+                                       fd_set *write_fd_set,
+                                       fd_set *exc_fd_set,
+                                       int *max_fd);
+
+/*
+ * Name:     curl_multi_wait()
+ *
+ * Desc:     Poll on all fds within a CURLM set as well as any
+ *           additional fds passed to the function.
+ *
+ * Returns:  CURLMcode type, general multi error code.
+ */
+CURL_EXTERN CURLMcode curl_multi_wait(CURLM *multi_handle,
+                                      struct curl_waitfd extra_fds[],
+                                      unsigned int extra_nfds,
+                                      int timeout_ms,
+                                      int *ret);
+
+/*
+ * Name:     curl_multi_poll()
+ *
+ * Desc:     Poll on all fds within a CURLM set as well as any
+ *           additional fds passed to the function.
+ *
+ * Returns:  CURLMcode type, general multi error code.
+ */
+CURL_EXTERN CURLMcode curl_multi_poll(CURLM *multi_handle,
+                                      struct curl_waitfd extra_fds[],
+                                      unsigned int extra_nfds,
+                                      int timeout_ms,
+                                      int *ret);
+
+/*
+ * Name:     curl_multi_wakeup()
+ *
+ * Desc:     wakes up a sleeping curl_multi_poll call.
+ *
+ * Returns:  CURLMcode type, general multi error code.
+ */
+CURL_EXTERN CURLMcode curl_multi_wakeup(CURLM *multi_handle);
+
+ /*
+  * Name:    curl_multi_perform()
+  *
+  * Desc:    When the app thinks there's data available for curl it calls this
+  *          function to read/write whatever there is right now. This returns
+  *          as soon as the reads and writes are done. This function does not
+  *          require that there actually is data available for reading or that
+  *          data can be written, it can be called just in case. It returns
+  *          the number of handles that still transfer data in the second
+  *          argument's integer-pointer.
+  *
+  * Returns: CURLMcode type, general multi error code. *NOTE* that this only
+  *          returns errors etc regarding the whole multi stack. There might
+  *          still have occurred problems on individual transfers even when
+  *          this returns OK.
+  */
+CURL_EXTERN CURLMcode curl_multi_perform(CURLM *multi_handle,
+                                         int *running_handles);
+
+ /*
+  * Name:    curl_multi_cleanup()
+  *
+  * Desc:    Cleans up and removes a whole multi stack. It does not free or
+  *          touch any individual easy handles in any way. We need to define
+  *          in what state those handles will be if this function is called
+  *          in the middle of a transfer.
+  *
+  * Returns: CURLMcode type, general multi error code.
+  */
+CURL_EXTERN CURLMcode curl_multi_cleanup(CURLM *multi_handle);
+
+/*
+ * Name:    curl_multi_info_read()
+ *
+ * Desc:    Ask the multi handle if there's any messages/informationals from
+ *          the individual transfers. Messages include informationals such as
+ *          error code from the transfer or just the fact that a transfer is
+ *          completed. More details on these should be written down as well.
+ *
+ *          Repeated calls to this function will return a new struct each
+ *          time, until a special "end of msgs" struct is returned as a signal
+ *          that there is no more to get at this point.
+ *
+ *          The data the returned pointer points to will not survive calling
+ *          curl_multi_cleanup().
+ *
+ *          The 'CURLMsg' struct is meant to be very simple and only contain
+ *          very basic information. If more involved information is wanted,
+ *          we will provide the particular "transfer handle" in that struct
+ *          and that should/could/would be used in subsequent
+ *          curl_easy_getinfo() calls (or similar). The point being that we
+ *          must never expose complex structs to applications, as then we'll
+ *          undoubtably get backwards compatibility problems in the future.
+ *
+ * Returns: A pointer to a filled-in struct, or NULL if it failed or ran out
+ *          of structs. It also writes the number of messages left in the
+ *          queue (after this read) in the integer the second argument points
+ *          to.
+ */
+CURL_EXTERN CURLMsg *curl_multi_info_read(CURLM *multi_handle,
+                                          int *msgs_in_queue);
+
+/*
+ * Name:    curl_multi_strerror()
+ *
+ * Desc:    The curl_multi_strerror function may be used to turn a CURLMcode
+ *          value into the equivalent human readable error string.  This is
+ *          useful for printing meaningful error messages.
+ *
+ * Returns: A pointer to a null-terminated error message.
+ */
+CURL_EXTERN const char *curl_multi_strerror(CURLMcode);
+
+/*
+ * Name:    curl_multi_socket() and
+ *          curl_multi_socket_all()
+ *
+ * Desc:    An alternative version of curl_multi_perform() that allows the
+ *          application to pass in one of the file descriptors that have been
+ *          detected to have "action" on them and let libcurl perform.
+ *          See man page for details.
+ */
+#define CURL_POLL_NONE   0
+#define CURL_POLL_IN     1
+#define CURL_POLL_OUT    2
+#define CURL_POLL_INOUT  3
+#define CURL_POLL_REMOVE 4
+
+#define CURL_SOCKET_TIMEOUT CURL_SOCKET_BAD
+
+#define CURL_CSELECT_IN   0x01
+#define CURL_CSELECT_OUT  0x02
+#define CURL_CSELECT_ERR  0x04
+
+typedef int (*curl_socket_callback)(CURL *easy,      /* easy handle */
+                                    curl_socket_t s, /* socket */
+                                    int what,        /* see above */
+                                    void *userp,     /* private callback
+                                                        pointer */
+                                    void *socketp);  /* private socket
+                                                        pointer */
+/*
+ * Name:    curl_multi_timer_callback
+ *
+ * Desc:    Called by libcurl whenever the library detects a change in the
+ *          maximum number of milliseconds the app is allowed to wait before
+ *          curl_multi_socket() or curl_multi_perform() must be called
+ *          (to allow libcurl's timed events to take place).
+ *
+ * Returns: The callback should return zero.
+ */
+typedef int (*curl_multi_timer_callback)(CURLM *multi,    /* multi handle */
+                                         long timeout_ms, /* see above */
+                                         void *userp);    /* private callback
+                                                             pointer */
+
+CURL_EXTERN CURLMcode curl_multi_socket(CURLM *multi_handle, curl_socket_t s,
+                                        int *running_handles);
+
+CURL_EXTERN CURLMcode curl_multi_socket_action(CURLM *multi_handle,
+                                               curl_socket_t s,
+                                               int ev_bitmask,
+                                               int *running_handles);
+
+CURL_EXTERN CURLMcode curl_multi_socket_all(CURLM *multi_handle,
+                                            int *running_handles);
+
+#ifndef CURL_ALLOW_OLD_MULTI_SOCKET
+/* This macro below was added in 7.16.3 to push users who recompile to use
+   the new curl_multi_socket_action() instead of the old curl_multi_socket()
+*/
+#define curl_multi_socket(x,y,z) curl_multi_socket_action(x,y,0,z)
+#endif
+
+/*
+ * Name:    curl_multi_timeout()
+ *
+ * Desc:    Returns the maximum number of milliseconds the app is allowed to
+ *          wait before curl_multi_socket() or curl_multi_perform() must be
+ *          called (to allow libcurl's timed events to take place).
+ *
+ * Returns: CURLM error code.
+ */
+CURL_EXTERN CURLMcode curl_multi_timeout(CURLM *multi_handle,
+                                         long *milliseconds);
+
+typedef enum {
+  /* This is the socket callback function pointer */
+  CURLOPT(CURLMOPT_SOCKETFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 1),
+
+  /* This is the argument passed to the socket callback */
+  CURLOPT(CURLMOPT_SOCKETDATA, CURLOPTTYPE_OBJECTPOINT, 2),
+
+    /* set to 1 to enable pipelining for this multi handle */
+  CURLOPT(CURLMOPT_PIPELINING, CURLOPTTYPE_LONG, 3),
+
+   /* This is the timer callback function pointer */
+  CURLOPT(CURLMOPT_TIMERFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 4),
+
+  /* This is the argument passed to the timer callback */
+  CURLOPT(CURLMOPT_TIMERDATA, CURLOPTTYPE_OBJECTPOINT, 5),
+
+  /* maximum number of entries in the connection cache */
+  CURLOPT(CURLMOPT_MAXCONNECTS, CURLOPTTYPE_LONG, 6),
+
+  /* maximum number of (pipelining) connections to one host */
+  CURLOPT(CURLMOPT_MAX_HOST_CONNECTIONS, CURLOPTTYPE_LONG, 7),
+
+  /* maximum number of requests in a pipeline */
+  CURLOPT(CURLMOPT_MAX_PIPELINE_LENGTH, CURLOPTTYPE_LONG, 8),
+
+  /* a connection with a content-length longer than this
+     will not be considered for pipelining */
+  CURLOPT(CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE, CURLOPTTYPE_OFF_T, 9),
+
+  /* a connection with a chunk length longer than this
+     will not be considered for pipelining */
+  CURLOPT(CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE, CURLOPTTYPE_OFF_T, 10),
+
+  /* a list of site names(+port) that are blocked from pipelining */
+  CURLOPT(CURLMOPT_PIPELINING_SITE_BL, CURLOPTTYPE_OBJECTPOINT, 11),
+
+  /* a list of server types that are blocked from pipelining */
+  CURLOPT(CURLMOPT_PIPELINING_SERVER_BL, CURLOPTTYPE_OBJECTPOINT, 12),
+
+  /* maximum number of open connections in total */
+  CURLOPT(CURLMOPT_MAX_TOTAL_CONNECTIONS, CURLOPTTYPE_LONG, 13),
+
+   /* This is the server push callback function pointer */
+  CURLOPT(CURLMOPT_PUSHFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 14),
+
+  /* This is the argument passed to the server push callback */
+  CURLOPT(CURLMOPT_PUSHDATA, CURLOPTTYPE_OBJECTPOINT, 15),
+
+  /* maximum number of concurrent streams to support on a connection */
+  CURLOPT(CURLMOPT_MAX_CONCURRENT_STREAMS, CURLOPTTYPE_LONG, 16),
+
+  CURLMOPT_LASTENTRY /* the last unused */
+} CURLMoption;
+
+
+/*
+ * Name:    curl_multi_setopt()
+ *
+ * Desc:    Sets options for the multi handle.
+ *
+ * Returns: CURLM error code.
+ */
+CURL_EXTERN CURLMcode curl_multi_setopt(CURLM *multi_handle,
+                                        CURLMoption option, ...);
+
+
+/*
+ * Name:    curl_multi_assign()
+ *
+ * Desc:    This function sets an association in the multi handle between the
+ *          given socket and a private pointer of the application. This is
+ *          (only) useful for curl_multi_socket uses.
+ *
+ * Returns: CURLM error code.
+ */
+CURL_EXTERN CURLMcode curl_multi_assign(CURLM *multi_handle,
+                                        curl_socket_t sockfd, void *sockp);
+
+
+/*
+ * Name: curl_push_callback
+ *
+ * Desc: This callback gets called when a new stream is being pushed by the
+ *       server. It approves or denies the new stream. It can also decide
+ *       to completely fail the connection.
+ *
+ * Returns: CURL_PUSH_OK, CURL_PUSH_DENY or CURL_PUSH_ERROROUT
+ */
+#define CURL_PUSH_OK       0
+#define CURL_PUSH_DENY     1
+#define CURL_PUSH_ERROROUT 2 /* added in 7.72.0 */
+
+struct curl_pushheaders;  /* forward declaration only */
+
+CURL_EXTERN char *curl_pushheader_bynum(struct curl_pushheaders *h,
+                                        size_t num);
+CURL_EXTERN char *curl_pushheader_byname(struct curl_pushheaders *h,
+                                         const char *name);
+
+typedef int (*curl_push_callback)(CURL *parent,
+                                  CURL *easy,
+                                  size_t num_headers,
+                                  struct curl_pushheaders *headers,
+                                  void *userp);
+
+#ifdef __cplusplus
+} /* end of extern "C" */
+#endif
+
+#endif
diff --git a/ap/lib/libcurl/curl-7.86.0/include/curl/options.h b/ap/lib/libcurl/curl-7.86.0/include/curl/options.h
new file mode 100755
index 0000000..a792687
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/curl/options.h
@@ -0,0 +1,70 @@
+#ifndef CURLINC_OPTIONS_H
+#define CURLINC_OPTIONS_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 2018 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * SPDX-License-Identifier: curl
+ *
+ ***************************************************************************/
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+  CURLOT_LONG,    /* long (a range of values) */
+  CURLOT_VALUES,  /*      (a defined set or bitmask) */
+  CURLOT_OFF_T,   /* curl_off_t (a range of values) */
+  CURLOT_OBJECT,  /* pointer (void *) */
+  CURLOT_STRING,  /*         (char * to null-terminated buffer) */
+  CURLOT_SLIST,   /*         (struct curl_slist *) */
+  CURLOT_CBPTR,   /*         (void * passed as-is to a callback) */
+  CURLOT_BLOB,    /* blob (struct curl_blob *) */
+  CURLOT_FUNCTION /* function pointer */
+} curl_easytype;
+
+/* Flag bits */
+
+/* "alias" means it is provided for old programs to remain functional,
+   we prefer another name */
+#define CURLOT_FLAG_ALIAS (1<<0)
+
+/* The CURLOPTTYPE_* id ranges can still be used to figure out what type/size
+   to use for curl_easy_setopt() for the given id */
+struct curl_easyoption {
+  const char *name;
+  CURLoption id;
+  curl_easytype type;
+  unsigned int flags;
+};
+
+CURL_EXTERN const struct curl_easyoption *
+curl_easy_option_by_name(const char *name);
+
+CURL_EXTERN const struct curl_easyoption *
+curl_easy_option_by_id(CURLoption id);
+
+CURL_EXTERN const struct curl_easyoption *
+curl_easy_option_next(const struct curl_easyoption *prev);
+
+#ifdef __cplusplus
+} /* end of extern "C" */
+#endif
+#endif /* CURLINC_OPTIONS_H */
diff --git a/ap/lib/libcurl/curl-7.86.0/include/curl/stdcheaders.h b/ap/lib/libcurl/curl-7.86.0/include/curl/stdcheaders.h
new file mode 100755
index 0000000..82e1b5f
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/curl/stdcheaders.h
@@ -0,0 +1,35 @@
+#ifndef CURLINC_STDCHEADERS_H
+#define CURLINC_STDCHEADERS_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * SPDX-License-Identifier: curl
+ *
+ ***************************************************************************/
+
+#include <sys/types.h>
+
+size_t fread(void *, size_t, size_t, FILE *);
+size_t fwrite(const void *, size_t, size_t, FILE *);
+
+int strcasecmp(const char *, const char *);
+int strncasecmp(const char *, const char *, size_t);
+
+#endif /* CURLINC_STDCHEADERS_H */
diff --git a/ap/lib/libcurl/curl-7.86.0/include/curl/system.h b/ap/lib/libcurl/curl-7.86.0/include/curl/system.h
new file mode 100755
index 0000000..8d56b8a
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/curl/system.h
@@ -0,0 +1,490 @@
+#ifndef CURLINC_SYSTEM_H
+#define CURLINC_SYSTEM_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * SPDX-License-Identifier: curl
+ *
+ ***************************************************************************/
+
+/*
+ * Try to keep one section per platform, compiler and architecture, otherwise,
+ * if an existing section is reused for a different one and later on the
+ * original is adjusted, probably the piggybacking one can be adversely
+ * changed.
+ *
+ * In order to differentiate between platforms/compilers/architectures use
+ * only compiler built in predefined preprocessor symbols.
+ *
+ * curl_off_t
+ * ----------
+ *
+ * For any given platform/compiler curl_off_t must be typedef'ed to a 64-bit
+ * wide signed integral data type. The width of this data type must remain
+ * constant and independent of any possible large file support settings.
+ *
+ * As an exception to the above, curl_off_t shall be typedef'ed to a 32-bit
+ * wide signed integral data type if there is no 64-bit type.
+ *
+ * As a general rule, curl_off_t shall not be mapped to off_t. This rule shall
+ * only be violated if off_t is the only 64-bit data type available and the
+ * size of off_t is independent of large file support settings. Keep your
+ * build on the safe side avoiding an off_t gating.  If you have a 64-bit
+ * off_t then take for sure that another 64-bit data type exists, dig deeper
+ * and you will find it.
+ *
+ */
+
+#if defined(__DJGPP__) || defined(__GO32__)
+#  if defined(__DJGPP__) && (__DJGPP__ > 1)
+#    define CURL_TYPEOF_CURL_OFF_T     long long
+#    define CURL_FORMAT_CURL_OFF_T     "lld"
+#    define CURL_FORMAT_CURL_OFF_TU    "llu"
+#    define CURL_SUFFIX_CURL_OFF_T     LL
+#    define CURL_SUFFIX_CURL_OFF_TU    ULL
+#  else
+#    define CURL_TYPEOF_CURL_OFF_T     long
+#    define CURL_FORMAT_CURL_OFF_T     "ld"
+#    define CURL_FORMAT_CURL_OFF_TU    "lu"
+#    define CURL_SUFFIX_CURL_OFF_T     L
+#    define CURL_SUFFIX_CURL_OFF_TU    UL
+#  endif
+#  define CURL_TYPEOF_CURL_SOCKLEN_T int
+
+#elif defined(__SALFORDC__)
+#  define CURL_TYPEOF_CURL_OFF_T     long
+#  define CURL_FORMAT_CURL_OFF_T     "ld"
+#  define CURL_FORMAT_CURL_OFF_TU    "lu"
+#  define CURL_SUFFIX_CURL_OFF_T     L
+#  define CURL_SUFFIX_CURL_OFF_TU    UL
+#  define CURL_TYPEOF_CURL_SOCKLEN_T int
+
+#elif defined(__BORLANDC__)
+#  if (__BORLANDC__ < 0x520)
+#    define CURL_TYPEOF_CURL_OFF_T     long
+#    define CURL_FORMAT_CURL_OFF_T     "ld"
+#    define CURL_FORMAT_CURL_OFF_TU    "lu"
+#    define CURL_SUFFIX_CURL_OFF_T     L
+#    define CURL_SUFFIX_CURL_OFF_TU    UL
+#  else
+#    define CURL_TYPEOF_CURL_OFF_T     __int64
+#    define CURL_FORMAT_CURL_OFF_T     "I64d"
+#    define CURL_FORMAT_CURL_OFF_TU    "I64u"
+#    define CURL_SUFFIX_CURL_OFF_T     i64
+#    define CURL_SUFFIX_CURL_OFF_TU    ui64
+#  endif
+#  define CURL_TYPEOF_CURL_SOCKLEN_T int
+
+#elif defined(__TURBOC__)
+#  define CURL_TYPEOF_CURL_OFF_T     long
+#  define CURL_FORMAT_CURL_OFF_T     "ld"
+#  define CURL_FORMAT_CURL_OFF_TU    "lu"
+#  define CURL_SUFFIX_CURL_OFF_T     L
+#  define CURL_SUFFIX_CURL_OFF_TU    UL
+#  define CURL_TYPEOF_CURL_SOCKLEN_T int
+
+#elif defined(__POCC__)
+#  if (__POCC__ < 280)
+#    define CURL_TYPEOF_CURL_OFF_T     long
+#    define CURL_FORMAT_CURL_OFF_T     "ld"
+#    define CURL_FORMAT_CURL_OFF_TU    "lu"
+#    define CURL_SUFFIX_CURL_OFF_T     L
+#    define CURL_SUFFIX_CURL_OFF_TU    UL
+#  elif defined(_MSC_VER)
+#    define CURL_TYPEOF_CURL_OFF_T     __int64
+#    define CURL_FORMAT_CURL_OFF_T     "I64d"
+#    define CURL_FORMAT_CURL_OFF_TU    "I64u"
+#    define CURL_SUFFIX_CURL_OFF_T     i64
+#    define CURL_SUFFIX_CURL_OFF_TU    ui64
+#  else
+#    define CURL_TYPEOF_CURL_OFF_T     long long
+#    define CURL_FORMAT_CURL_OFF_T     "lld"
+#    define CURL_FORMAT_CURL_OFF_TU    "llu"
+#    define CURL_SUFFIX_CURL_OFF_T     LL
+#    define CURL_SUFFIX_CURL_OFF_TU    ULL
+#  endif
+#  define CURL_TYPEOF_CURL_SOCKLEN_T int
+
+#elif defined(__LCC__)
+#  if defined(__MCST__) /* MCST eLbrus Compiler Collection */
+#    define CURL_TYPEOF_CURL_OFF_T     long
+#    define CURL_FORMAT_CURL_OFF_T     "ld"
+#    define CURL_FORMAT_CURL_OFF_TU    "lu"
+#    define CURL_SUFFIX_CURL_OFF_T     L
+#    define CURL_SUFFIX_CURL_OFF_TU    UL
+#    define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t
+#    define CURL_PULL_SYS_TYPES_H      1
+#    define CURL_PULL_SYS_SOCKET_H     1
+#  else                /* Local (or Little) C Compiler */
+#    define CURL_TYPEOF_CURL_OFF_T     long
+#    define CURL_FORMAT_CURL_OFF_T     "ld"
+#    define CURL_FORMAT_CURL_OFF_TU    "lu"
+#    define CURL_SUFFIX_CURL_OFF_T     L
+#    define CURL_SUFFIX_CURL_OFF_TU    UL
+#    define CURL_TYPEOF_CURL_SOCKLEN_T int
+#  endif
+
+#elif defined(__SYMBIAN32__)
+#  if defined(__EABI__) /* Treat all ARM compilers equally */
+#    define CURL_TYPEOF_CURL_OFF_T     long long
+#    define CURL_FORMAT_CURL_OFF_T     "lld"
+#    define CURL_FORMAT_CURL_OFF_TU    "llu"
+#    define CURL_SUFFIX_CURL_OFF_T     LL
+#    define CURL_SUFFIX_CURL_OFF_TU    ULL
+#  elif defined(__CW32__)
+#    pragma longlong on
+#    define CURL_TYPEOF_CURL_OFF_T     long long
+#    define CURL_FORMAT_CURL_OFF_T     "lld"
+#    define CURL_FORMAT_CURL_OFF_TU    "llu"
+#    define CURL_SUFFIX_CURL_OFF_T     LL
+#    define CURL_SUFFIX_CURL_OFF_TU    ULL
+#  elif defined(__VC32__)
+#    define CURL_TYPEOF_CURL_OFF_T     __int64
+#    define CURL_FORMAT_CURL_OFF_T     "lld"
+#    define CURL_FORMAT_CURL_OFF_TU    "llu"
+#    define CURL_SUFFIX_CURL_OFF_T     LL
+#    define CURL_SUFFIX_CURL_OFF_TU    ULL
+#  endif
+#  define CURL_TYPEOF_CURL_SOCKLEN_T unsigned int
+
+#elif defined(__MWERKS__)
+#  define CURL_TYPEOF_CURL_OFF_T     long long
+#  define CURL_FORMAT_CURL_OFF_T     "lld"
+#  define CURL_FORMAT_CURL_OFF_TU    "llu"
+#  define CURL_SUFFIX_CURL_OFF_T     LL
+#  define CURL_SUFFIX_CURL_OFF_TU    ULL
+#  define CURL_TYPEOF_CURL_SOCKLEN_T int
+
+#elif defined(_WIN32_WCE)
+#  define CURL_TYPEOF_CURL_OFF_T     __int64
+#  define CURL_FORMAT_CURL_OFF_T     "I64d"
+#  define CURL_FORMAT_CURL_OFF_TU    "I64u"
+#  define CURL_SUFFIX_CURL_OFF_T     i64
+#  define CURL_SUFFIX_CURL_OFF_TU    ui64
+#  define CURL_TYPEOF_CURL_SOCKLEN_T int
+
+#elif defined(__MINGW32__)
+#  define CURL_TYPEOF_CURL_OFF_T     long long
+#  define CURL_FORMAT_CURL_OFF_T     "I64d"
+#  define CURL_FORMAT_CURL_OFF_TU    "I64u"
+#  define CURL_SUFFIX_CURL_OFF_T     LL
+#  define CURL_SUFFIX_CURL_OFF_TU    ULL
+#  define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t
+#  define CURL_PULL_SYS_TYPES_H      1
+#  define CURL_PULL_WS2TCPIP_H       1
+
+#elif defined(__VMS)
+#  if defined(__VAX)
+#    define CURL_TYPEOF_CURL_OFF_T     long
+#    define CURL_FORMAT_CURL_OFF_T     "ld"
+#    define CURL_FORMAT_CURL_OFF_TU    "lu"
+#    define CURL_SUFFIX_CURL_OFF_T     L
+#    define CURL_SUFFIX_CURL_OFF_TU    UL
+#  else
+#    define CURL_TYPEOF_CURL_OFF_T     long long
+#    define CURL_FORMAT_CURL_OFF_T     "lld"
+#    define CURL_FORMAT_CURL_OFF_TU    "llu"
+#    define CURL_SUFFIX_CURL_OFF_T     LL
+#    define CURL_SUFFIX_CURL_OFF_TU    ULL
+#  endif
+#  define CURL_TYPEOF_CURL_SOCKLEN_T unsigned int
+
+#elif defined(__OS400__)
+#  if defined(__ILEC400__)
+#    define CURL_TYPEOF_CURL_OFF_T     long long
+#    define CURL_FORMAT_CURL_OFF_T     "lld"
+#    define CURL_FORMAT_CURL_OFF_TU    "llu"
+#    define CURL_SUFFIX_CURL_OFF_T     LL
+#    define CURL_SUFFIX_CURL_OFF_TU    ULL
+#    define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t
+#    define CURL_PULL_SYS_TYPES_H      1
+#    define CURL_PULL_SYS_SOCKET_H     1
+#  endif
+
+#elif defined(__MVS__)
+#  if defined(__IBMC__) || defined(__IBMCPP__)
+#    if defined(_ILP32)
+#    elif defined(_LP64)
+#    endif
+#    if defined(_LONG_LONG)
+#      define CURL_TYPEOF_CURL_OFF_T     long long
+#      define CURL_FORMAT_CURL_OFF_T     "lld"
+#      define CURL_FORMAT_CURL_OFF_TU    "llu"
+#      define CURL_SUFFIX_CURL_OFF_T     LL
+#      define CURL_SUFFIX_CURL_OFF_TU    ULL
+#    elif defined(_LP64)
+#      define CURL_TYPEOF_CURL_OFF_T     long
+#      define CURL_FORMAT_CURL_OFF_T     "ld"
+#      define CURL_FORMAT_CURL_OFF_TU    "lu"
+#      define CURL_SUFFIX_CURL_OFF_T     L
+#      define CURL_SUFFIX_CURL_OFF_TU    UL
+#    else
+#      define CURL_TYPEOF_CURL_OFF_T     long
+#      define CURL_FORMAT_CURL_OFF_T     "ld"
+#      define CURL_FORMAT_CURL_OFF_TU    "lu"
+#      define CURL_SUFFIX_CURL_OFF_T     L
+#      define CURL_SUFFIX_CURL_OFF_TU    UL
+#    endif
+#    define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t
+#    define CURL_PULL_SYS_TYPES_H      1
+#    define CURL_PULL_SYS_SOCKET_H     1
+#  endif
+
+#elif defined(__370__)
+#  if defined(__IBMC__) || defined(__IBMCPP__)
+#    if defined(_ILP32)
+#    elif defined(_LP64)
+#    endif
+#    if defined(_LONG_LONG)
+#      define CURL_TYPEOF_CURL_OFF_T     long long
+#      define CURL_FORMAT_CURL_OFF_T     "lld"
+#      define CURL_FORMAT_CURL_OFF_TU    "llu"
+#      define CURL_SUFFIX_CURL_OFF_T     LL
+#      define CURL_SUFFIX_CURL_OFF_TU    ULL
+#    elif defined(_LP64)
+#      define CURL_TYPEOF_CURL_OFF_T     long
+#      define CURL_FORMAT_CURL_OFF_T     "ld"
+#      define CURL_FORMAT_CURL_OFF_TU    "lu"
+#      define CURL_SUFFIX_CURL_OFF_T     L
+#      define CURL_SUFFIX_CURL_OFF_TU    UL
+#    else
+#      define CURL_TYPEOF_CURL_OFF_T     long
+#      define CURL_FORMAT_CURL_OFF_T     "ld"
+#      define CURL_FORMAT_CURL_OFF_TU    "lu"
+#      define CURL_SUFFIX_CURL_OFF_T     L
+#      define CURL_SUFFIX_CURL_OFF_TU    UL
+#    endif
+#    define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t
+#    define CURL_PULL_SYS_TYPES_H      1
+#    define CURL_PULL_SYS_SOCKET_H     1
+#  endif
+
+#elif defined(TPF)
+#  define CURL_TYPEOF_CURL_OFF_T     long
+#  define CURL_FORMAT_CURL_OFF_T     "ld"
+#  define CURL_FORMAT_CURL_OFF_TU    "lu"
+#  define CURL_SUFFIX_CURL_OFF_T     L
+#  define CURL_SUFFIX_CURL_OFF_TU    UL
+#  define CURL_TYPEOF_CURL_SOCKLEN_T int
+
+#elif defined(__TINYC__) /* also known as tcc */
+#  define CURL_TYPEOF_CURL_OFF_T     long long
+#  define CURL_FORMAT_CURL_OFF_T     "lld"
+#  define CURL_FORMAT_CURL_OFF_TU    "llu"
+#  define CURL_SUFFIX_CURL_OFF_T     LL
+#  define CURL_SUFFIX_CURL_OFF_TU    ULL
+#  define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t
+#  define CURL_PULL_SYS_TYPES_H      1
+#  define CURL_PULL_SYS_SOCKET_H     1
+
+#elif defined(__SUNPRO_C) || defined(__SUNPRO_CC) /* Oracle Solaris Studio */
+#  if !defined(__LP64) && (defined(__ILP32) ||                          \
+                           defined(__i386) ||                           \
+                           defined(__sparcv8) ||                        \
+                           defined(__sparcv8plus))
+#    define CURL_TYPEOF_CURL_OFF_T     long long
+#    define CURL_FORMAT_CURL_OFF_T     "lld"
+#    define CURL_FORMAT_CURL_OFF_TU    "llu"
+#    define CURL_SUFFIX_CURL_OFF_T     LL
+#    define CURL_SUFFIX_CURL_OFF_TU    ULL
+#  elif defined(__LP64) || \
+        defined(__amd64) || defined(__sparcv9)
+#    define CURL_TYPEOF_CURL_OFF_T     long
+#    define CURL_FORMAT_CURL_OFF_T     "ld"
+#    define CURL_FORMAT_CURL_OFF_TU    "lu"
+#    define CURL_SUFFIX_CURL_OFF_T     L
+#    define CURL_SUFFIX_CURL_OFF_TU    UL
+#  endif
+#  define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t
+#  define CURL_PULL_SYS_TYPES_H      1
+#  define CURL_PULL_SYS_SOCKET_H     1
+
+#elif defined(__xlc__) /* IBM xlc compiler */
+#  if !defined(_LP64)
+#    define CURL_TYPEOF_CURL_OFF_T     long long
+#    define CURL_FORMAT_CURL_OFF_T     "lld"
+#    define CURL_FORMAT_CURL_OFF_TU    "llu"
+#    define CURL_SUFFIX_CURL_OFF_T     LL
+#    define CURL_SUFFIX_CURL_OFF_TU    ULL
+#  else
+#    define CURL_TYPEOF_CURL_OFF_T     long
+#    define CURL_FORMAT_CURL_OFF_T     "ld"
+#    define CURL_FORMAT_CURL_OFF_TU    "lu"
+#    define CURL_SUFFIX_CURL_OFF_T     L
+#    define CURL_SUFFIX_CURL_OFF_TU    UL
+#  endif
+#  define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t
+#  define CURL_PULL_SYS_TYPES_H      1
+#  define CURL_PULL_SYS_SOCKET_H     1
+
+/* ===================================== */
+/*    KEEP MSVC THE PENULTIMATE ENTRY    */
+/* ===================================== */
+
+#elif defined(_MSC_VER)
+#  if (_MSC_VER >= 900) && (_INTEGRAL_MAX_BITS >= 64)
+#    define CURL_TYPEOF_CURL_OFF_T     __int64
+#    define CURL_FORMAT_CURL_OFF_T     "I64d"
+#    define CURL_FORMAT_CURL_OFF_TU    "I64u"
+#    define CURL_SUFFIX_CURL_OFF_T     i64
+#    define CURL_SUFFIX_CURL_OFF_TU    ui64
+#  else
+#    define CURL_TYPEOF_CURL_OFF_T     long
+#    define CURL_FORMAT_CURL_OFF_T     "ld"
+#    define CURL_FORMAT_CURL_OFF_TU    "lu"
+#    define CURL_SUFFIX_CURL_OFF_T     L
+#    define CURL_SUFFIX_CURL_OFF_TU    UL
+#  endif
+#  define CURL_TYPEOF_CURL_SOCKLEN_T int
+
+/* ===================================== */
+/*    KEEP GENERIC GCC THE LAST ENTRY    */
+/* ===================================== */
+
+#elif defined(__GNUC__) && !defined(_SCO_DS)
+#  if !defined(__LP64__) &&                                             \
+  (defined(__ILP32__) || defined(__i386__) || defined(__hppa__) ||      \
+   defined(__ppc__) || defined(__powerpc__) || defined(__arm__) ||      \
+   defined(__sparc__) || defined(__mips__) || defined(__sh__) ||        \
+   defined(__XTENSA__) ||                                               \
+   (defined(__SIZEOF_LONG__) && __SIZEOF_LONG__ == 4)  ||               \
+   (defined(__LONG_MAX__) && __LONG_MAX__ == 2147483647L))
+#    define CURL_TYPEOF_CURL_OFF_T     long long
+#    define CURL_FORMAT_CURL_OFF_T     "lld"
+#    define CURL_FORMAT_CURL_OFF_TU    "llu"
+#    define CURL_SUFFIX_CURL_OFF_T     LL
+#    define CURL_SUFFIX_CURL_OFF_TU    ULL
+#  elif defined(__LP64__) || \
+        defined(__x86_64__) || defined(__ppc64__) || defined(__sparc64__) || \
+        defined(__e2k__) || \
+        (defined(__SIZEOF_LONG__) && __SIZEOF_LONG__ == 8) || \
+        (defined(__LONG_MAX__) && __LONG_MAX__ == 9223372036854775807L)
+#    define CURL_TYPEOF_CURL_OFF_T     long
+#    define CURL_FORMAT_CURL_OFF_T     "ld"
+#    define CURL_FORMAT_CURL_OFF_TU    "lu"
+#    define CURL_SUFFIX_CURL_OFF_T     L
+#    define CURL_SUFFIX_CURL_OFF_TU    UL
+#  endif
+#  define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t
+#  define CURL_PULL_SYS_TYPES_H      1
+#  define CURL_PULL_SYS_SOCKET_H     1
+
+#else
+/* generic "safe guess" on old 32 bit style */
+# define CURL_TYPEOF_CURL_OFF_T     long
+# define CURL_FORMAT_CURL_OFF_T     "ld"
+# define CURL_FORMAT_CURL_OFF_TU    "lu"
+# define CURL_SUFFIX_CURL_OFF_T     L
+# define CURL_SUFFIX_CURL_OFF_TU    UL
+# define CURL_TYPEOF_CURL_SOCKLEN_T int
+#endif
+
+#ifdef _AIX
+/* AIX needs <sys/poll.h> */
+#define CURL_PULL_SYS_POLL_H
+#endif
+
+
+/* CURL_PULL_WS2TCPIP_H is defined above when inclusion of header file  */
+/* ws2tcpip.h is required here to properly make type definitions below. */
+#ifdef CURL_PULL_WS2TCPIP_H
+#  include <winsock2.h>
+#  include <windows.h>
+#  include <ws2tcpip.h>
+#endif
+
+/* CURL_PULL_SYS_TYPES_H is defined above when inclusion of header file  */
+/* sys/types.h is required here to properly make type definitions below. */
+#ifdef CURL_PULL_SYS_TYPES_H
+#  include <sys/types.h>
+#endif
+
+/* CURL_PULL_SYS_SOCKET_H is defined above when inclusion of header file  */
+/* sys/socket.h is required here to properly make type definitions below. */
+#ifdef CURL_PULL_SYS_SOCKET_H
+#  include <sys/socket.h>
+#endif
+
+/* CURL_PULL_SYS_POLL_H is defined above when inclusion of header file    */
+/* sys/poll.h is required here to properly make type definitions below.   */
+#ifdef CURL_PULL_SYS_POLL_H
+#  include <sys/poll.h>
+#endif
+
+/* Data type definition of curl_socklen_t. */
+#ifdef CURL_TYPEOF_CURL_SOCKLEN_T
+  typedef CURL_TYPEOF_CURL_SOCKLEN_T curl_socklen_t;
+#endif
+
+/* Data type definition of curl_off_t. */
+
+#ifdef CURL_TYPEOF_CURL_OFF_T
+  typedef CURL_TYPEOF_CURL_OFF_T curl_off_t;
+#endif
+
+/*
+ * CURL_ISOCPP and CURL_OFF_T_C definitions are done here in order to allow
+ * these to be visible and exported by the external libcurl interface API,
+ * while also making them visible to the library internals, simply including
+ * curl_setup.h, without actually needing to include curl.h internally.
+ * If some day this section would grow big enough, all this should be moved
+ * to its own header file.
+ */
+
+/*
+ * Figure out if we can use the ## preprocessor operator, which is supported
+ * by ISO/ANSI C and C++. Some compilers support it without setting __STDC__
+ * or  __cplusplus so we need to carefully check for them too.
+ */
+
+#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus) || \
+  defined(__HP_aCC) || defined(__BORLANDC__) || defined(__LCC__) || \
+  defined(__POCC__) || defined(__SALFORDC__) || defined(__HIGHC__) || \
+  defined(__ILEC400__)
+  /* This compiler is believed to have an ISO compatible preprocessor */
+#define CURL_ISOCPP
+#else
+  /* This compiler is believed NOT to have an ISO compatible preprocessor */
+#undef CURL_ISOCPP
+#endif
+
+/*
+ * Macros for minimum-width signed and unsigned curl_off_t integer constants.
+ */
+
+#if defined(__BORLANDC__) && (__BORLANDC__ == 0x0551)
+#  define CURLINC_OFF_T_C_HLPR2(x) x
+#  define CURLINC_OFF_T_C_HLPR1(x) CURLINC_OFF_T_C_HLPR2(x)
+#  define CURL_OFF_T_C(Val)  CURLINC_OFF_T_C_HLPR1(Val) ## \
+                             CURLINC_OFF_T_C_HLPR1(CURL_SUFFIX_CURL_OFF_T)
+#  define CURL_OFF_TU_C(Val) CURLINC_OFF_T_C_HLPR1(Val) ## \
+                             CURLINC_OFF_T_C_HLPR1(CURL_SUFFIX_CURL_OFF_TU)
+#else
+#  ifdef CURL_ISOCPP
+#    define CURLINC_OFF_T_C_HLPR2(Val,Suffix) Val ## Suffix
+#  else
+#    define CURLINC_OFF_T_C_HLPR2(Val,Suffix) Val/**/Suffix
+#  endif
+#  define CURLINC_OFF_T_C_HLPR1(Val,Suffix) CURLINC_OFF_T_C_HLPR2(Val,Suffix)
+#  define CURL_OFF_T_C(Val)  CURLINC_OFF_T_C_HLPR1(Val,CURL_SUFFIX_CURL_OFF_T)
+#  define CURL_OFF_TU_C(Val) CURLINC_OFF_T_C_HLPR1(Val,CURL_SUFFIX_CURL_OFF_TU)
+#endif
+
+#endif /* CURLINC_SYSTEM_H */
diff --git a/ap/lib/libcurl/curl-7.86.0/include/curl/typecheck-gcc.h b/ap/lib/libcurl/curl-7.86.0/include/curl/typecheck-gcc.h
new file mode 100755
index 0000000..2dabcb4
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/curl/typecheck-gcc.h
@@ -0,0 +1,712 @@
+#ifndef CURLINC_TYPECHECK_GCC_H
+#define CURLINC_TYPECHECK_GCC_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * SPDX-License-Identifier: curl
+ *
+ ***************************************************************************/
+
+/* wraps curl_easy_setopt() with typechecking */
+
+/* To add a new kind of warning, add an
+ *   if(curlcheck_sometype_option(_curl_opt))
+ *     if(!curlcheck_sometype(value))
+ *       _curl_easy_setopt_err_sometype();
+ * block and define curlcheck_sometype_option, curlcheck_sometype and
+ * _curl_easy_setopt_err_sometype below
+ *
+ * NOTE: We use two nested 'if' statements here instead of the && operator, in
+ *       order to work around gcc bug #32061.  It affects only gcc 4.3.x/4.4.x
+ *       when compiling with -Wlogical-op.
+ *
+ * To add an option that uses the same type as an existing option, you'll just
+ * need to extend the appropriate _curl_*_option macro
+ */
+#define curl_easy_setopt(handle, option, value)                         \
+  __extension__({                                                       \
+      __typeof__(option) _curl_opt = option;                            \
+      if(__builtin_constant_p(_curl_opt)) {                             \
+        if(curlcheck_long_option(_curl_opt))                            \
+          if(!curlcheck_long(value))                                    \
+            _curl_easy_setopt_err_long();                               \
+        if(curlcheck_off_t_option(_curl_opt))                           \
+          if(!curlcheck_off_t(value))                                   \
+            _curl_easy_setopt_err_curl_off_t();                         \
+        if(curlcheck_string_option(_curl_opt))                          \
+          if(!curlcheck_string(value))                                  \
+            _curl_easy_setopt_err_string();                             \
+        if(curlcheck_write_cb_option(_curl_opt))                        \
+          if(!curlcheck_write_cb(value))                                \
+            _curl_easy_setopt_err_write_callback();                     \
+        if((_curl_opt) == CURLOPT_RESOLVER_START_FUNCTION)              \
+          if(!curlcheck_resolver_start_callback(value))                 \
+            _curl_easy_setopt_err_resolver_start_callback();            \
+        if((_curl_opt) == CURLOPT_READFUNCTION)                         \
+          if(!curlcheck_read_cb(value))                                 \
+            _curl_easy_setopt_err_read_cb();                            \
+        if((_curl_opt) == CURLOPT_IOCTLFUNCTION)                        \
+          if(!curlcheck_ioctl_cb(value))                                \
+            _curl_easy_setopt_err_ioctl_cb();                           \
+        if((_curl_opt) == CURLOPT_SOCKOPTFUNCTION)                      \
+          if(!curlcheck_sockopt_cb(value))                              \
+            _curl_easy_setopt_err_sockopt_cb();                         \
+        if((_curl_opt) == CURLOPT_OPENSOCKETFUNCTION)                   \
+          if(!curlcheck_opensocket_cb(value))                           \
+            _curl_easy_setopt_err_opensocket_cb();                      \
+        if((_curl_opt) == CURLOPT_PROGRESSFUNCTION)                     \
+          if(!curlcheck_progress_cb(value))                             \
+            _curl_easy_setopt_err_progress_cb();                        \
+        if((_curl_opt) == CURLOPT_DEBUGFUNCTION)                        \
+          if(!curlcheck_debug_cb(value))                                \
+            _curl_easy_setopt_err_debug_cb();                           \
+        if((_curl_opt) == CURLOPT_SSL_CTX_FUNCTION)                     \
+          if(!curlcheck_ssl_ctx_cb(value))                              \
+            _curl_easy_setopt_err_ssl_ctx_cb();                         \
+        if(curlcheck_conv_cb_option(_curl_opt))                         \
+          if(!curlcheck_conv_cb(value))                                 \
+            _curl_easy_setopt_err_conv_cb();                            \
+        if((_curl_opt) == CURLOPT_SEEKFUNCTION)                         \
+          if(!curlcheck_seek_cb(value))                                 \
+            _curl_easy_setopt_err_seek_cb();                            \
+        if(curlcheck_cb_data_option(_curl_opt))                         \
+          if(!curlcheck_cb_data(value))                                 \
+            _curl_easy_setopt_err_cb_data();                            \
+        if((_curl_opt) == CURLOPT_ERRORBUFFER)                          \
+          if(!curlcheck_error_buffer(value))                            \
+            _curl_easy_setopt_err_error_buffer();                       \
+        if((_curl_opt) == CURLOPT_STDERR)                               \
+          if(!curlcheck_FILE(value))                                    \
+            _curl_easy_setopt_err_FILE();                               \
+        if(curlcheck_postfields_option(_curl_opt))                      \
+          if(!curlcheck_postfields(value))                              \
+            _curl_easy_setopt_err_postfields();                         \
+        if((_curl_opt) == CURLOPT_HTTPPOST)                             \
+          if(!curlcheck_arr((value), struct curl_httppost))             \
+            _curl_easy_setopt_err_curl_httpost();                       \
+        if((_curl_opt) == CURLOPT_MIMEPOST)                             \
+          if(!curlcheck_ptr((value), curl_mime))                        \
+            _curl_easy_setopt_err_curl_mimepost();                      \
+        if(curlcheck_slist_option(_curl_opt))                           \
+          if(!curlcheck_arr((value), struct curl_slist))                \
+            _curl_easy_setopt_err_curl_slist();                         \
+        if((_curl_opt) == CURLOPT_SHARE)                                \
+          if(!curlcheck_ptr((value), CURLSH))                           \
+            _curl_easy_setopt_err_CURLSH();                             \
+      }                                                                 \
+      curl_easy_setopt(handle, _curl_opt, value);                       \
+    })
+
+/* wraps curl_easy_getinfo() with typechecking */
+#define curl_easy_getinfo(handle, info, arg)                            \
+  __extension__({                                                      \
+      __typeof__(info) _curl_info = info;                               \
+      if(__builtin_constant_p(_curl_info)) {                            \
+        if(curlcheck_string_info(_curl_info))                           \
+          if(!curlcheck_arr((arg), char *))                             \
+            _curl_easy_getinfo_err_string();                            \
+        if(curlcheck_long_info(_curl_info))                             \
+          if(!curlcheck_arr((arg), long))                               \
+            _curl_easy_getinfo_err_long();                              \
+        if(curlcheck_double_info(_curl_info))                           \
+          if(!curlcheck_arr((arg), double))                             \
+            _curl_easy_getinfo_err_double();                            \
+        if(curlcheck_slist_info(_curl_info))                            \
+          if(!curlcheck_arr((arg), struct curl_slist *))                \
+            _curl_easy_getinfo_err_curl_slist();                        \
+        if(curlcheck_tlssessioninfo_info(_curl_info))                   \
+          if(!curlcheck_arr((arg), struct curl_tlssessioninfo *))       \
+            _curl_easy_getinfo_err_curl_tlssesssioninfo();              \
+        if(curlcheck_certinfo_info(_curl_info))                         \
+          if(!curlcheck_arr((arg), struct curl_certinfo *))             \
+            _curl_easy_getinfo_err_curl_certinfo();                     \
+        if(curlcheck_socket_info(_curl_info))                           \
+          if(!curlcheck_arr((arg), curl_socket_t))                      \
+            _curl_easy_getinfo_err_curl_socket();                       \
+        if(curlcheck_off_t_info(_curl_info))                            \
+          if(!curlcheck_arr((arg), curl_off_t))                         \
+            _curl_easy_getinfo_err_curl_off_t();                        \
+      }                                                                 \
+      curl_easy_getinfo(handle, _curl_info, arg);                       \
+    })
+
+/*
+ * For now, just make sure that the functions are called with three arguments
+ */
+#define curl_share_setopt(share,opt,param) curl_share_setopt(share,opt,param)
+#define curl_multi_setopt(handle,opt,param) curl_multi_setopt(handle,opt,param)
+
+
+/* the actual warnings, triggered by calling the _curl_easy_setopt_err*
+ * functions */
+
+/* To define a new warning, use _CURL_WARNING(identifier, "message") */
+#define CURLWARNING(id, message)                                        \
+  static void __attribute__((__warning__(message)))                     \
+  __attribute__((__unused__)) __attribute__((__noinline__))             \
+  id(void) { __asm__(""); }
+
+CURLWARNING(_curl_easy_setopt_err_long,
+  "curl_easy_setopt expects a long argument for this option")
+CURLWARNING(_curl_easy_setopt_err_curl_off_t,
+  "curl_easy_setopt expects a curl_off_t argument for this option")
+CURLWARNING(_curl_easy_setopt_err_string,
+              "curl_easy_setopt expects a "
+              "string ('char *' or char[]) argument for this option"
+  )
+CURLWARNING(_curl_easy_setopt_err_write_callback,
+  "curl_easy_setopt expects a curl_write_callback argument for this option")
+CURLWARNING(_curl_easy_setopt_err_resolver_start_callback,
+              "curl_easy_setopt expects a "
+              "curl_resolver_start_callback argument for this option"
+  )
+CURLWARNING(_curl_easy_setopt_err_read_cb,
+  "curl_easy_setopt expects a curl_read_callback argument for this option")
+CURLWARNING(_curl_easy_setopt_err_ioctl_cb,
+  "curl_easy_setopt expects a curl_ioctl_callback argument for this option")
+CURLWARNING(_curl_easy_setopt_err_sockopt_cb,
+  "curl_easy_setopt expects a curl_sockopt_callback argument for this option")
+CURLWARNING(_curl_easy_setopt_err_opensocket_cb,
+              "curl_easy_setopt expects a "
+              "curl_opensocket_callback argument for this option"
+  )
+CURLWARNING(_curl_easy_setopt_err_progress_cb,
+  "curl_easy_setopt expects a curl_progress_callback argument for this option")
+CURLWARNING(_curl_easy_setopt_err_debug_cb,
+  "curl_easy_setopt expects a curl_debug_callback argument for this option")
+CURLWARNING(_curl_easy_setopt_err_ssl_ctx_cb,
+  "curl_easy_setopt expects a curl_ssl_ctx_callback argument for this option")
+CURLWARNING(_curl_easy_setopt_err_conv_cb,
+  "curl_easy_setopt expects a curl_conv_callback argument for this option")
+CURLWARNING(_curl_easy_setopt_err_seek_cb,
+  "curl_easy_setopt expects a curl_seek_callback argument for this option")
+CURLWARNING(_curl_easy_setopt_err_cb_data,
+              "curl_easy_setopt expects a "
+              "private data pointer as argument for this option")
+CURLWARNING(_curl_easy_setopt_err_error_buffer,
+              "curl_easy_setopt expects a "
+              "char buffer of CURL_ERROR_SIZE as argument for this option")
+CURLWARNING(_curl_easy_setopt_err_FILE,
+  "curl_easy_setopt expects a 'FILE *' argument for this option")
+CURLWARNING(_curl_easy_setopt_err_postfields,
+  "curl_easy_setopt expects a 'void *' or 'char *' argument for this option")
+CURLWARNING(_curl_easy_setopt_err_curl_httpost,
+              "curl_easy_setopt expects a 'struct curl_httppost *' "
+              "argument for this option")
+CURLWARNING(_curl_easy_setopt_err_curl_mimepost,
+              "curl_easy_setopt expects a 'curl_mime *' "
+              "argument for this option")
+CURLWARNING(_curl_easy_setopt_err_curl_slist,
+  "curl_easy_setopt expects a 'struct curl_slist *' argument for this option")
+CURLWARNING(_curl_easy_setopt_err_CURLSH,
+  "curl_easy_setopt expects a CURLSH* argument for this option")
+
+CURLWARNING(_curl_easy_getinfo_err_string,
+  "curl_easy_getinfo expects a pointer to 'char *' for this info")
+CURLWARNING(_curl_easy_getinfo_err_long,
+  "curl_easy_getinfo expects a pointer to long for this info")
+CURLWARNING(_curl_easy_getinfo_err_double,
+  "curl_easy_getinfo expects a pointer to double for this info")
+CURLWARNING(_curl_easy_getinfo_err_curl_slist,
+  "curl_easy_getinfo expects a pointer to 'struct curl_slist *' for this info")
+CURLWARNING(_curl_easy_getinfo_err_curl_tlssesssioninfo,
+              "curl_easy_getinfo expects a pointer to "
+              "'struct curl_tlssessioninfo *' for this info")
+CURLWARNING(_curl_easy_getinfo_err_curl_certinfo,
+              "curl_easy_getinfo expects a pointer to "
+              "'struct curl_certinfo *' for this info")
+CURLWARNING(_curl_easy_getinfo_err_curl_socket,
+  "curl_easy_getinfo expects a pointer to curl_socket_t for this info")
+CURLWARNING(_curl_easy_getinfo_err_curl_off_t,
+  "curl_easy_getinfo expects a pointer to curl_off_t for this info")
+
+/* groups of curl_easy_setops options that take the same type of argument */
+
+/* To add a new option to one of the groups, just add
+ *   (option) == CURLOPT_SOMETHING
+ * to the or-expression. If the option takes a long or curl_off_t, you don't
+ * have to do anything
+ */
+
+/* evaluates to true if option takes a long argument */
+#define curlcheck_long_option(option)                   \
+  (0 < (option) && (option) < CURLOPTTYPE_OBJECTPOINT)
+
+#define curlcheck_off_t_option(option)          \
+  (((option) > CURLOPTTYPE_OFF_T) && ((option) < CURLOPTTYPE_BLOB))
+
+/* evaluates to true if option takes a char* argument */
+#define curlcheck_string_option(option)                                       \
+  ((option) == CURLOPT_ABSTRACT_UNIX_SOCKET ||                                \
+   (option) == CURLOPT_ACCEPT_ENCODING ||                                     \
+   (option) == CURLOPT_ALTSVC ||                                              \
+   (option) == CURLOPT_CAINFO ||                                              \
+   (option) == CURLOPT_CAPATH ||                                              \
+   (option) == CURLOPT_COOKIE ||                                              \
+   (option) == CURLOPT_COOKIEFILE ||                                          \
+   (option) == CURLOPT_COOKIEJAR ||                                           \
+   (option) == CURLOPT_COOKIELIST ||                                          \
+   (option) == CURLOPT_CRLFILE ||                                             \
+   (option) == CURLOPT_CUSTOMREQUEST ||                                       \
+   (option) == CURLOPT_DEFAULT_PROTOCOL ||                                    \
+   (option) == CURLOPT_DNS_INTERFACE ||                                       \
+   (option) == CURLOPT_DNS_LOCAL_IP4 ||                                       \
+   (option) == CURLOPT_DNS_LOCAL_IP6 ||                                       \
+   (option) == CURLOPT_DNS_SERVERS ||                                         \
+   (option) == CURLOPT_DOH_URL ||                                             \
+   (option) == CURLOPT_EGDSOCKET ||                                           \
+   (option) == CURLOPT_FTP_ACCOUNT ||                                         \
+   (option) == CURLOPT_FTP_ALTERNATIVE_TO_USER ||                             \
+   (option) == CURLOPT_FTPPORT ||                                             \
+   (option) == CURLOPT_HSTS ||                                                \
+   (option) == CURLOPT_INTERFACE ||                                           \
+   (option) == CURLOPT_ISSUERCERT ||                                          \
+   (option) == CURLOPT_KEYPASSWD ||                                           \
+   (option) == CURLOPT_KRBLEVEL ||                                            \
+   (option) == CURLOPT_LOGIN_OPTIONS ||                                       \
+   (option) == CURLOPT_MAIL_AUTH ||                                           \
+   (option) == CURLOPT_MAIL_FROM ||                                           \
+   (option) == CURLOPT_NETRC_FILE ||                                          \
+   (option) == CURLOPT_NOPROXY ||                                             \
+   (option) == CURLOPT_PASSWORD ||                                            \
+   (option) == CURLOPT_PINNEDPUBLICKEY ||                                     \
+   (option) == CURLOPT_PRE_PROXY ||                                           \
+   (option) == CURLOPT_PROTOCOLS_STR ||                                       \
+   (option) == CURLOPT_PROXY ||                                               \
+   (option) == CURLOPT_PROXY_CAINFO ||                                        \
+   (option) == CURLOPT_PROXY_CAPATH ||                                        \
+   (option) == CURLOPT_PROXY_CRLFILE ||                                       \
+   (option) == CURLOPT_PROXY_ISSUERCERT ||                                    \
+   (option) == CURLOPT_PROXY_KEYPASSWD ||                                     \
+   (option) == CURLOPT_PROXY_PINNEDPUBLICKEY ||                               \
+   (option) == CURLOPT_PROXY_SERVICE_NAME ||                                  \
+   (option) == CURLOPT_PROXY_SSL_CIPHER_LIST ||                               \
+   (option) == CURLOPT_PROXY_SSLCERT ||                                       \
+   (option) == CURLOPT_PROXY_SSLCERTTYPE ||                                   \
+   (option) == CURLOPT_PROXY_SSLKEY ||                                        \
+   (option) == CURLOPT_PROXY_SSLKEYTYPE ||                                    \
+   (option) == CURLOPT_PROXY_TLS13_CIPHERS ||                                 \
+   (option) == CURLOPT_PROXY_TLSAUTH_PASSWORD ||                              \
+   (option) == CURLOPT_PROXY_TLSAUTH_TYPE ||                                  \
+   (option) == CURLOPT_PROXY_TLSAUTH_USERNAME ||                              \
+   (option) == CURLOPT_PROXYPASSWORD ||                                       \
+   (option) == CURLOPT_PROXYUSERNAME ||                                       \
+   (option) == CURLOPT_PROXYUSERPWD ||                                        \
+   (option) == CURLOPT_RANDOM_FILE ||                                         \
+   (option) == CURLOPT_RANGE ||                                               \
+   (option) == CURLOPT_REDIR_PROTOCOLS_STR ||                                 \
+   (option) == CURLOPT_REFERER ||                                             \
+   (option) == CURLOPT_REQUEST_TARGET ||                                      \
+   (option) == CURLOPT_RTSP_SESSION_ID ||                                     \
+   (option) == CURLOPT_RTSP_STREAM_URI ||                                     \
+   (option) == CURLOPT_RTSP_TRANSPORT ||                                      \
+   (option) == CURLOPT_SASL_AUTHZID ||                                        \
+   (option) == CURLOPT_SERVICE_NAME ||                                        \
+   (option) == CURLOPT_SOCKS5_GSSAPI_SERVICE ||                               \
+   (option) == CURLOPT_SSH_HOST_PUBLIC_KEY_MD5 ||                             \
+   (option) == CURLOPT_SSH_HOST_PUBLIC_KEY_SHA256 ||                          \
+   (option) == CURLOPT_SSH_KNOWNHOSTS ||                                      \
+   (option) == CURLOPT_SSH_PRIVATE_KEYFILE ||                                 \
+   (option) == CURLOPT_SSH_PUBLIC_KEYFILE ||                                  \
+   (option) == CURLOPT_SSLCERT ||                                             \
+   (option) == CURLOPT_SSLCERTTYPE ||                                         \
+   (option) == CURLOPT_SSLENGINE ||                                           \
+   (option) == CURLOPT_SSLKEY ||                                              \
+   (option) == CURLOPT_SSLKEYTYPE ||                                          \
+   (option) == CURLOPT_SSL_CIPHER_LIST ||                                     \
+   (option) == CURLOPT_TLS13_CIPHERS ||                                       \
+   (option) == CURLOPT_TLSAUTH_PASSWORD ||                                    \
+   (option) == CURLOPT_TLSAUTH_TYPE ||                                        \
+   (option) == CURLOPT_TLSAUTH_USERNAME ||                                    \
+   (option) == CURLOPT_UNIX_SOCKET_PATH ||                                    \
+   (option) == CURLOPT_URL ||                                                 \
+   (option) == CURLOPT_USERAGENT ||                                           \
+   (option) == CURLOPT_USERNAME ||                                            \
+   (option) == CURLOPT_AWS_SIGV4 ||                                           \
+   (option) == CURLOPT_USERPWD ||                                             \
+   (option) == CURLOPT_XOAUTH2_BEARER ||                                      \
+   (option) == CURLOPT_SSL_EC_CURVES ||                                       \
+   0)
+
+/* evaluates to true if option takes a curl_write_callback argument */
+#define curlcheck_write_cb_option(option)                               \
+  ((option) == CURLOPT_HEADERFUNCTION ||                                \
+   (option) == CURLOPT_WRITEFUNCTION)
+
+/* evaluates to true if option takes a curl_conv_callback argument */
+#define curlcheck_conv_cb_option(option)                                \
+  ((option) == CURLOPT_CONV_TO_NETWORK_FUNCTION ||                      \
+   (option) == CURLOPT_CONV_FROM_NETWORK_FUNCTION ||                    \
+   (option) == CURLOPT_CONV_FROM_UTF8_FUNCTION)
+
+/* evaluates to true if option takes a data argument to pass to a callback */
+#define curlcheck_cb_data_option(option)                                      \
+  ((option) == CURLOPT_CHUNK_DATA ||                                          \
+   (option) == CURLOPT_CLOSESOCKETDATA ||                                     \
+   (option) == CURLOPT_DEBUGDATA ||                                           \
+   (option) == CURLOPT_FNMATCH_DATA ||                                        \
+   (option) == CURLOPT_HEADERDATA ||                                          \
+   (option) == CURLOPT_HSTSREADDATA ||                                        \
+   (option) == CURLOPT_HSTSWRITEDATA ||                                       \
+   (option) == CURLOPT_INTERLEAVEDATA ||                                      \
+   (option) == CURLOPT_IOCTLDATA ||                                           \
+   (option) == CURLOPT_OPENSOCKETDATA ||                                      \
+   (option) == CURLOPT_PREREQDATA ||                                          \
+   (option) == CURLOPT_PROGRESSDATA ||                                        \
+   (option) == CURLOPT_READDATA ||                                            \
+   (option) == CURLOPT_SEEKDATA ||                                            \
+   (option) == CURLOPT_SOCKOPTDATA ||                                         \
+   (option) == CURLOPT_SSH_KEYDATA ||                                         \
+   (option) == CURLOPT_SSL_CTX_DATA ||                                        \
+   (option) == CURLOPT_WRITEDATA ||                                           \
+   (option) == CURLOPT_RESOLVER_START_DATA ||                                 \
+   (option) == CURLOPT_TRAILERDATA ||                                         \
+   (option) == CURLOPT_SSH_HOSTKEYDATA ||                                     \
+   0)
+
+/* evaluates to true if option takes a POST data argument (void* or char*) */
+#define curlcheck_postfields_option(option)                                   \
+  ((option) == CURLOPT_POSTFIELDS ||                                          \
+   (option) == CURLOPT_COPYPOSTFIELDS ||                                      \
+   0)
+
+/* evaluates to true if option takes a struct curl_slist * argument */
+#define curlcheck_slist_option(option)                                        \
+  ((option) == CURLOPT_HTTP200ALIASES ||                                      \
+   (option) == CURLOPT_HTTPHEADER ||                                          \
+   (option) == CURLOPT_MAIL_RCPT ||                                           \
+   (option) == CURLOPT_POSTQUOTE ||                                           \
+   (option) == CURLOPT_PREQUOTE ||                                            \
+   (option) == CURLOPT_PROXYHEADER ||                                         \
+   (option) == CURLOPT_QUOTE ||                                               \
+   (option) == CURLOPT_RESOLVE ||                                             \
+   (option) == CURLOPT_TELNETOPTIONS ||                                       \
+   (option) == CURLOPT_CONNECT_TO ||                                          \
+   0)
+
+/* groups of curl_easy_getinfo infos that take the same type of argument */
+
+/* evaluates to true if info expects a pointer to char * argument */
+#define curlcheck_string_info(info)                             \
+  (CURLINFO_STRING < (info) && (info) < CURLINFO_LONG &&        \
+   (info) != CURLINFO_PRIVATE)
+
+/* evaluates to true if info expects a pointer to long argument */
+#define curlcheck_long_info(info)                       \
+  (CURLINFO_LONG < (info) && (info) < CURLINFO_DOUBLE)
+
+/* evaluates to true if info expects a pointer to double argument */
+#define curlcheck_double_info(info)                     \
+  (CURLINFO_DOUBLE < (info) && (info) < CURLINFO_SLIST)
+
+/* true if info expects a pointer to struct curl_slist * argument */
+#define curlcheck_slist_info(info)                                      \
+  (((info) == CURLINFO_SSL_ENGINES) || ((info) == CURLINFO_COOKIELIST))
+
+/* true if info expects a pointer to struct curl_tlssessioninfo * argument */
+#define curlcheck_tlssessioninfo_info(info)                              \
+  (((info) == CURLINFO_TLS_SSL_PTR) || ((info) == CURLINFO_TLS_SESSION))
+
+/* true if info expects a pointer to struct curl_certinfo * argument */
+#define curlcheck_certinfo_info(info) ((info) == CURLINFO_CERTINFO)
+
+/* true if info expects a pointer to struct curl_socket_t argument */
+#define curlcheck_socket_info(info)                     \
+  (CURLINFO_SOCKET < (info) && (info) < CURLINFO_OFF_T)
+
+/* true if info expects a pointer to curl_off_t argument */
+#define curlcheck_off_t_info(info)              \
+  (CURLINFO_OFF_T < (info))
+
+
+/* typecheck helpers -- check whether given expression has requested type*/
+
+/* For pointers, you can use the curlcheck_ptr/curlcheck_arr macros,
+ * otherwise define a new macro. Search for __builtin_types_compatible_p
+ * in the GCC manual.
+ * NOTE: these macros MUST NOT EVALUATE their arguments! The argument is
+ * the actual expression passed to the curl_easy_setopt macro. This
+ * means that you can only apply the sizeof and __typeof__ operators, no
+ * == or whatsoever.
+ */
+
+/* XXX: should evaluate to true if expr is a pointer */
+#define curlcheck_any_ptr(expr)                 \
+  (sizeof(expr) == sizeof(void *))
+
+/* evaluates to true if expr is NULL */
+/* XXX: must not evaluate expr, so this check is not accurate */
+#define curlcheck_NULL(expr)                                            \
+  (__builtin_types_compatible_p(__typeof__(expr), __typeof__(NULL)))
+
+/* evaluates to true if expr is type*, const type* or NULL */
+#define curlcheck_ptr(expr, type)                                       \
+  (curlcheck_NULL(expr) ||                                              \
+   __builtin_types_compatible_p(__typeof__(expr), type *) ||            \
+   __builtin_types_compatible_p(__typeof__(expr), const type *))
+
+/* evaluates to true if expr is one of type[], type*, NULL or const type* */
+#define curlcheck_arr(expr, type)                                       \
+  (curlcheck_ptr((expr), type) ||                                       \
+   __builtin_types_compatible_p(__typeof__(expr), type []))
+
+/* evaluates to true if expr is a string */
+#define curlcheck_string(expr)                                          \
+  (curlcheck_arr((expr), char) ||                                       \
+   curlcheck_arr((expr), signed char) ||                                \
+   curlcheck_arr((expr), unsigned char))
+
+/* evaluates to true if expr is a long (no matter the signedness)
+ * XXX: for now, int is also accepted (and therefore short and char, which
+ * are promoted to int when passed to a variadic function) */
+#define curlcheck_long(expr)                                                  \
+  (__builtin_types_compatible_p(__typeof__(expr), long) ||                    \
+   __builtin_types_compatible_p(__typeof__(expr), signed long) ||             \
+   __builtin_types_compatible_p(__typeof__(expr), unsigned long) ||           \
+   __builtin_types_compatible_p(__typeof__(expr), int) ||                     \
+   __builtin_types_compatible_p(__typeof__(expr), signed int) ||              \
+   __builtin_types_compatible_p(__typeof__(expr), unsigned int) ||            \
+   __builtin_types_compatible_p(__typeof__(expr), short) ||                   \
+   __builtin_types_compatible_p(__typeof__(expr), signed short) ||            \
+   __builtin_types_compatible_p(__typeof__(expr), unsigned short) ||          \
+   __builtin_types_compatible_p(__typeof__(expr), char) ||                    \
+   __builtin_types_compatible_p(__typeof__(expr), signed char) ||             \
+   __builtin_types_compatible_p(__typeof__(expr), unsigned char))
+
+/* evaluates to true if expr is of type curl_off_t */
+#define curlcheck_off_t(expr)                                   \
+  (__builtin_types_compatible_p(__typeof__(expr), curl_off_t))
+
+/* evaluates to true if expr is abuffer suitable for CURLOPT_ERRORBUFFER */
+/* XXX: also check size of an char[] array? */
+#define curlcheck_error_buffer(expr)                                    \
+  (curlcheck_NULL(expr) ||                                              \
+   __builtin_types_compatible_p(__typeof__(expr), char *) ||            \
+   __builtin_types_compatible_p(__typeof__(expr), char[]))
+
+/* evaluates to true if expr is of type (const) void* or (const) FILE* */
+#if 0
+#define curlcheck_cb_data(expr)                                         \
+  (curlcheck_ptr((expr), void) ||                                       \
+   curlcheck_ptr((expr), FILE))
+#else /* be less strict */
+#define curlcheck_cb_data(expr)                 \
+  curlcheck_any_ptr(expr)
+#endif
+
+/* evaluates to true if expr is of type FILE* */
+#define curlcheck_FILE(expr)                                            \
+  (curlcheck_NULL(expr) ||                                              \
+   (__builtin_types_compatible_p(__typeof__(expr), FILE *)))
+
+/* evaluates to true if expr can be passed as POST data (void* or char*) */
+#define curlcheck_postfields(expr)                                      \
+  (curlcheck_ptr((expr), void) ||                                       \
+   curlcheck_arr((expr), char) ||                                       \
+   curlcheck_arr((expr), unsigned char))
+
+/* helper: __builtin_types_compatible_p distinguishes between functions and
+ * function pointers, hide it */
+#define curlcheck_cb_compatible(func, type)                             \
+  (__builtin_types_compatible_p(__typeof__(func), type) ||              \
+   __builtin_types_compatible_p(__typeof__(func) *, type))
+
+/* evaluates to true if expr is of type curl_resolver_start_callback */
+#define curlcheck_resolver_start_callback(expr)       \
+  (curlcheck_NULL(expr) || \
+   curlcheck_cb_compatible((expr), curl_resolver_start_callback))
+
+/* evaluates to true if expr is of type curl_read_callback or "similar" */
+#define curlcheck_read_cb(expr)                                         \
+  (curlcheck_NULL(expr) ||                                              \
+   curlcheck_cb_compatible((expr), __typeof__(fread) *) ||              \
+   curlcheck_cb_compatible((expr), curl_read_callback) ||               \
+   curlcheck_cb_compatible((expr), _curl_read_callback1) ||             \
+   curlcheck_cb_compatible((expr), _curl_read_callback2) ||             \
+   curlcheck_cb_compatible((expr), _curl_read_callback3) ||             \
+   curlcheck_cb_compatible((expr), _curl_read_callback4) ||             \
+   curlcheck_cb_compatible((expr), _curl_read_callback5) ||             \
+   curlcheck_cb_compatible((expr), _curl_read_callback6))
+typedef size_t (*_curl_read_callback1)(char *, size_t, size_t, void *);
+typedef size_t (*_curl_read_callback2)(char *, size_t, size_t, const void *);
+typedef size_t (*_curl_read_callback3)(char *, size_t, size_t, FILE *);
+typedef size_t (*_curl_read_callback4)(void *, size_t, size_t, void *);
+typedef size_t (*_curl_read_callback5)(void *, size_t, size_t, const void *);
+typedef size_t (*_curl_read_callback6)(void *, size_t, size_t, FILE *);
+
+/* evaluates to true if expr is of type curl_write_callback or "similar" */
+#define curlcheck_write_cb(expr)                                        \
+  (curlcheck_read_cb(expr) ||                                           \
+   curlcheck_cb_compatible((expr), __typeof__(fwrite) *) ||             \
+   curlcheck_cb_compatible((expr), curl_write_callback) ||              \
+   curlcheck_cb_compatible((expr), _curl_write_callback1) ||            \
+   curlcheck_cb_compatible((expr), _curl_write_callback2) ||            \
+   curlcheck_cb_compatible((expr), _curl_write_callback3) ||            \
+   curlcheck_cb_compatible((expr), _curl_write_callback4) ||            \
+   curlcheck_cb_compatible((expr), _curl_write_callback5) ||            \
+   curlcheck_cb_compatible((expr), _curl_write_callback6))
+typedef size_t (*_curl_write_callback1)(const char *, size_t, size_t, void *);
+typedef size_t (*_curl_write_callback2)(const char *, size_t, size_t,
+                                       const void *);
+typedef size_t (*_curl_write_callback3)(const char *, size_t, size_t, FILE *);
+typedef size_t (*_curl_write_callback4)(const void *, size_t, size_t, void *);
+typedef size_t (*_curl_write_callback5)(const void *, size_t, size_t,
+                                       const void *);
+typedef size_t (*_curl_write_callback6)(const void *, size_t, size_t, FILE *);
+
+/* evaluates to true if expr is of type curl_ioctl_callback or "similar" */
+#define curlcheck_ioctl_cb(expr)                                        \
+  (curlcheck_NULL(expr) ||                                              \
+   curlcheck_cb_compatible((expr), curl_ioctl_callback) ||              \
+   curlcheck_cb_compatible((expr), _curl_ioctl_callback1) ||            \
+   curlcheck_cb_compatible((expr), _curl_ioctl_callback2) ||            \
+   curlcheck_cb_compatible((expr), _curl_ioctl_callback3) ||            \
+   curlcheck_cb_compatible((expr), _curl_ioctl_callback4))
+typedef curlioerr (*_curl_ioctl_callback1)(CURL *, int, void *);
+typedef curlioerr (*_curl_ioctl_callback2)(CURL *, int, const void *);
+typedef curlioerr (*_curl_ioctl_callback3)(CURL *, curliocmd, void *);
+typedef curlioerr (*_curl_ioctl_callback4)(CURL *, curliocmd, const void *);
+
+/* evaluates to true if expr is of type curl_sockopt_callback or "similar" */
+#define curlcheck_sockopt_cb(expr)                                      \
+  (curlcheck_NULL(expr) ||                                              \
+   curlcheck_cb_compatible((expr), curl_sockopt_callback) ||            \
+   curlcheck_cb_compatible((expr), _curl_sockopt_callback1) ||          \
+   curlcheck_cb_compatible((expr), _curl_sockopt_callback2))
+typedef int (*_curl_sockopt_callback1)(void *, curl_socket_t, curlsocktype);
+typedef int (*_curl_sockopt_callback2)(const void *, curl_socket_t,
+                                      curlsocktype);
+
+/* evaluates to true if expr is of type curl_opensocket_callback or
+   "similar" */
+#define curlcheck_opensocket_cb(expr)                                   \
+  (curlcheck_NULL(expr) ||                                              \
+   curlcheck_cb_compatible((expr), curl_opensocket_callback) ||         \
+   curlcheck_cb_compatible((expr), _curl_opensocket_callback1) ||       \
+   curlcheck_cb_compatible((expr), _curl_opensocket_callback2) ||       \
+   curlcheck_cb_compatible((expr), _curl_opensocket_callback3) ||       \
+   curlcheck_cb_compatible((expr), _curl_opensocket_callback4))
+typedef curl_socket_t (*_curl_opensocket_callback1)
+  (void *, curlsocktype, struct curl_sockaddr *);
+typedef curl_socket_t (*_curl_opensocket_callback2)
+  (void *, curlsocktype, const struct curl_sockaddr *);
+typedef curl_socket_t (*_curl_opensocket_callback3)
+  (const void *, curlsocktype, struct curl_sockaddr *);
+typedef curl_socket_t (*_curl_opensocket_callback4)
+  (const void *, curlsocktype, const struct curl_sockaddr *);
+
+/* evaluates to true if expr is of type curl_progress_callback or "similar" */
+#define curlcheck_progress_cb(expr)                                     \
+  (curlcheck_NULL(expr) ||                                              \
+   curlcheck_cb_compatible((expr), curl_progress_callback) ||           \
+   curlcheck_cb_compatible((expr), _curl_progress_callback1) ||         \
+   curlcheck_cb_compatible((expr), _curl_progress_callback2))
+typedef int (*_curl_progress_callback1)(void *,
+    double, double, double, double);
+typedef int (*_curl_progress_callback2)(const void *,
+    double, double, double, double);
+
+/* evaluates to true if expr is of type curl_debug_callback or "similar" */
+#define curlcheck_debug_cb(expr)                                        \
+  (curlcheck_NULL(expr) ||                                              \
+   curlcheck_cb_compatible((expr), curl_debug_callback) ||              \
+   curlcheck_cb_compatible((expr), _curl_debug_callback1) ||            \
+   curlcheck_cb_compatible((expr), _curl_debug_callback2) ||            \
+   curlcheck_cb_compatible((expr), _curl_debug_callback3) ||            \
+   curlcheck_cb_compatible((expr), _curl_debug_callback4) ||            \
+   curlcheck_cb_compatible((expr), _curl_debug_callback5) ||            \
+   curlcheck_cb_compatible((expr), _curl_debug_callback6) ||            \
+   curlcheck_cb_compatible((expr), _curl_debug_callback7) ||            \
+   curlcheck_cb_compatible((expr), _curl_debug_callback8))
+typedef int (*_curl_debug_callback1) (CURL *,
+    curl_infotype, char *, size_t, void *);
+typedef int (*_curl_debug_callback2) (CURL *,
+    curl_infotype, char *, size_t, const void *);
+typedef int (*_curl_debug_callback3) (CURL *,
+    curl_infotype, const char *, size_t, void *);
+typedef int (*_curl_debug_callback4) (CURL *,
+    curl_infotype, const char *, size_t, const void *);
+typedef int (*_curl_debug_callback5) (CURL *,
+    curl_infotype, unsigned char *, size_t, void *);
+typedef int (*_curl_debug_callback6) (CURL *,
+    curl_infotype, unsigned char *, size_t, const void *);
+typedef int (*_curl_debug_callback7) (CURL *,
+    curl_infotype, const unsigned char *, size_t, void *);
+typedef int (*_curl_debug_callback8) (CURL *,
+    curl_infotype, const unsigned char *, size_t, const void *);
+
+/* evaluates to true if expr is of type curl_ssl_ctx_callback or "similar" */
+/* this is getting even messier... */
+#define curlcheck_ssl_ctx_cb(expr)                                      \
+  (curlcheck_NULL(expr) ||                                              \
+   curlcheck_cb_compatible((expr), curl_ssl_ctx_callback) ||            \
+   curlcheck_cb_compatible((expr), _curl_ssl_ctx_callback1) ||          \
+   curlcheck_cb_compatible((expr), _curl_ssl_ctx_callback2) ||          \
+   curlcheck_cb_compatible((expr), _curl_ssl_ctx_callback3) ||          \
+   curlcheck_cb_compatible((expr), _curl_ssl_ctx_callback4) ||          \
+   curlcheck_cb_compatible((expr), _curl_ssl_ctx_callback5) ||          \
+   curlcheck_cb_compatible((expr), _curl_ssl_ctx_callback6) ||          \
+   curlcheck_cb_compatible((expr), _curl_ssl_ctx_callback7) ||          \
+   curlcheck_cb_compatible((expr), _curl_ssl_ctx_callback8))
+typedef CURLcode (*_curl_ssl_ctx_callback1)(CURL *, void *, void *);
+typedef CURLcode (*_curl_ssl_ctx_callback2)(CURL *, void *, const void *);
+typedef CURLcode (*_curl_ssl_ctx_callback3)(CURL *, const void *, void *);
+typedef CURLcode (*_curl_ssl_ctx_callback4)(CURL *, const void *,
+                                            const void *);
+#ifdef HEADER_SSL_H
+/* hack: if we included OpenSSL's ssl.h, we know about SSL_CTX
+ * this will of course break if we're included before OpenSSL headers...
+ */
+typedef CURLcode (*_curl_ssl_ctx_callback5)(CURL *, SSL_CTX *, void *);
+typedef CURLcode (*_curl_ssl_ctx_callback6)(CURL *, SSL_CTX *, const void *);
+typedef CURLcode (*_curl_ssl_ctx_callback7)(CURL *, const SSL_CTX *, void *);
+typedef CURLcode (*_curl_ssl_ctx_callback8)(CURL *, const SSL_CTX *,
+                                            const void *);
+#else
+typedef _curl_ssl_ctx_callback1 _curl_ssl_ctx_callback5;
+typedef _curl_ssl_ctx_callback1 _curl_ssl_ctx_callback6;
+typedef _curl_ssl_ctx_callback1 _curl_ssl_ctx_callback7;
+typedef _curl_ssl_ctx_callback1 _curl_ssl_ctx_callback8;
+#endif
+
+/* evaluates to true if expr is of type curl_conv_callback or "similar" */
+#define curlcheck_conv_cb(expr)                                         \
+  (curlcheck_NULL(expr) ||                                              \
+   curlcheck_cb_compatible((expr), curl_conv_callback) ||               \
+   curlcheck_cb_compatible((expr), _curl_conv_callback1) ||             \
+   curlcheck_cb_compatible((expr), _curl_conv_callback2) ||             \
+   curlcheck_cb_compatible((expr), _curl_conv_callback3) ||             \
+   curlcheck_cb_compatible((expr), _curl_conv_callback4))
+typedef CURLcode (*_curl_conv_callback1)(char *, size_t length);
+typedef CURLcode (*_curl_conv_callback2)(const char *, size_t length);
+typedef CURLcode (*_curl_conv_callback3)(void *, size_t length);
+typedef CURLcode (*_curl_conv_callback4)(const void *, size_t length);
+
+/* evaluates to true if expr is of type curl_seek_callback or "similar" */
+#define curlcheck_seek_cb(expr)                                         \
+  (curlcheck_NULL(expr) ||                                              \
+   curlcheck_cb_compatible((expr), curl_seek_callback) ||               \
+   curlcheck_cb_compatible((expr), _curl_seek_callback1) ||             \
+   curlcheck_cb_compatible((expr), _curl_seek_callback2))
+typedef CURLcode (*_curl_seek_callback1)(void *, curl_off_t, int);
+typedef CURLcode (*_curl_seek_callback2)(const void *, curl_off_t, int);
+
+
+#endif /* CURLINC_TYPECHECK_GCC_H */
diff --git a/ap/lib/libcurl/curl-7.86.0/include/curl/urlapi.h b/ap/lib/libcurl/curl-7.86.0/include/curl/urlapi.h
new file mode 100755
index 0000000..e15c213
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/curl/urlapi.h
@@ -0,0 +1,147 @@
+#ifndef CURLINC_URLAPI_H
+#define CURLINC_URLAPI_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 2018 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * SPDX-License-Identifier: curl
+ *
+ ***************************************************************************/
+
+#include "curl.h"
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+/* the error codes for the URL API */
+typedef enum {
+  CURLUE_OK,
+  CURLUE_BAD_HANDLE,          /* 1 */
+  CURLUE_BAD_PARTPOINTER,     /* 2 */
+  CURLUE_MALFORMED_INPUT,     /* 3 */
+  CURLUE_BAD_PORT_NUMBER,     /* 4 */
+  CURLUE_UNSUPPORTED_SCHEME,  /* 5 */
+  CURLUE_URLDECODE,           /* 6 */
+  CURLUE_OUT_OF_MEMORY,       /* 7 */
+  CURLUE_USER_NOT_ALLOWED,    /* 8 */
+  CURLUE_UNKNOWN_PART,        /* 9 */
+  CURLUE_NO_SCHEME,           /* 10 */
+  CURLUE_NO_USER,             /* 11 */
+  CURLUE_NO_PASSWORD,         /* 12 */
+  CURLUE_NO_OPTIONS,          /* 13 */
+  CURLUE_NO_HOST,             /* 14 */
+  CURLUE_NO_PORT,             /* 15 */
+  CURLUE_NO_QUERY,            /* 16 */
+  CURLUE_NO_FRAGMENT,         /* 17 */
+  CURLUE_NO_ZONEID,           /* 18 */
+  CURLUE_BAD_FILE_URL,        /* 19 */
+  CURLUE_BAD_FRAGMENT,        /* 20 */
+  CURLUE_BAD_HOSTNAME,        /* 21 */
+  CURLUE_BAD_IPV6,            /* 22 */
+  CURLUE_BAD_LOGIN,           /* 23 */
+  CURLUE_BAD_PASSWORD,        /* 24 */
+  CURLUE_BAD_PATH,            /* 25 */
+  CURLUE_BAD_QUERY,           /* 26 */
+  CURLUE_BAD_SCHEME,          /* 27 */
+  CURLUE_BAD_SLASHES,         /* 28 */
+  CURLUE_BAD_USER,            /* 29 */
+  CURLUE_LAST
+} CURLUcode;
+
+typedef enum {
+  CURLUPART_URL,
+  CURLUPART_SCHEME,
+  CURLUPART_USER,
+  CURLUPART_PASSWORD,
+  CURLUPART_OPTIONS,
+  CURLUPART_HOST,
+  CURLUPART_PORT,
+  CURLUPART_PATH,
+  CURLUPART_QUERY,
+  CURLUPART_FRAGMENT,
+  CURLUPART_ZONEID /* added in 7.65.0 */
+} CURLUPart;
+
+#define CURLU_DEFAULT_PORT (1<<0)       /* return default port number */
+#define CURLU_NO_DEFAULT_PORT (1<<1)    /* act as if no port number was set,
+                                           if the port number matches the
+                                           default for the scheme */
+#define CURLU_DEFAULT_SCHEME (1<<2)     /* return default scheme if
+                                           missing */
+#define CURLU_NON_SUPPORT_SCHEME (1<<3) /* allow non-supported scheme */
+#define CURLU_PATH_AS_IS (1<<4)         /* leave dot sequences */
+#define CURLU_DISALLOW_USER (1<<5)      /* no user+password allowed */
+#define CURLU_URLDECODE (1<<6)          /* URL decode on get */
+#define CURLU_URLENCODE (1<<7)          /* URL encode on set */
+#define CURLU_APPENDQUERY (1<<8)        /* append a form style part */
+#define CURLU_GUESS_SCHEME (1<<9)       /* legacy curl-style guessing */
+#define CURLU_NO_AUTHORITY (1<<10)      /* Allow empty authority when the
+                                           scheme is unknown. */
+#define CURLU_ALLOW_SPACE (1<<11)       /* Allow spaces in the URL */
+
+typedef struct Curl_URL CURLU;
+
+/*
+ * curl_url() creates a new CURLU handle and returns a pointer to it.
+ * Must be freed with curl_url_cleanup().
+ */
+CURL_EXTERN CURLU *curl_url(void);
+
+/*
+ * curl_url_cleanup() frees the CURLU handle and related resources used for
+ * the URL parsing. It will not free strings previously returned with the URL
+ * API.
+ */
+CURL_EXTERN void curl_url_cleanup(CURLU *handle);
+
+/*
+ * curl_url_dup() duplicates a CURLU handle and returns a new copy. The new
+ * handle must also be freed with curl_url_cleanup().
+ */
+CURL_EXTERN CURLU *curl_url_dup(CURLU *in);
+
+/*
+ * curl_url_get() extracts a specific part of the URL from a CURLU
+ * handle. Returns error code. The returned pointer MUST be freed with
+ * curl_free() afterwards.
+ */
+CURL_EXTERN CURLUcode curl_url_get(CURLU *handle, CURLUPart what,
+                                   char **part, unsigned int flags);
+
+/*
+ * curl_url_set() sets a specific part of the URL in a CURLU handle. Returns
+ * error code. The passed in string will be copied. Passing a NULL instead of
+ * a part string, clears that part.
+ */
+CURL_EXTERN CURLUcode curl_url_set(CURLU *handle, CURLUPart what,
+                                   const char *part, unsigned int flags);
+
+/*
+ * curl_url_strerror() turns a CURLUcode value into the equivalent human
+ * readable error string.  This is useful for printing meaningful error
+ * messages.
+ */
+CURL_EXTERN const char *curl_url_strerror(CURLUcode);
+
+#ifdef __cplusplus
+} /* end of extern "C" */
+#endif
+
+#endif /* CURLINC_URLAPI_H */
diff --git a/ap/lib/libcurl/curl-7.86.0/include/curl/websockets.h b/ap/lib/libcurl/curl-7.86.0/include/curl/websockets.h
new file mode 100755
index 0000000..4d57f91
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/include/curl/websockets.h
@@ -0,0 +1,83 @@
+#ifndef CURLINC_WEBSOCKETS_H
+#define CURLINC_WEBSOCKETS_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * SPDX-License-Identifier: curl
+ *
+ ***************************************************************************/
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+struct curl_ws_frame {
+  int age;              /* zero */
+  int flags;            /* See the CURLWS_* defines */
+  curl_off_t offset;    /* the offset of this data into the frame */
+  curl_off_t bytesleft; /* number of pending bytes left of the payload */
+};
+
+/* flag bits */
+#define CURLWS_TEXT       (1<<0)
+#define CURLWS_BINARY     (1<<1)
+#define CURLWS_CONT       (1<<2)
+#define CURLWS_CLOSE      (1<<3)
+#define CURLWS_PING       (1<<4)
+#define CURLWS_OFFSET     (1<<5)
+
+/*
+ * NAME curl_ws_recv()
+ *
+ * DESCRIPTION
+ *
+ * Receives data from the websocket connection. Use after successful
+ * curl_easy_perform() with CURLOPT_CONNECT_ONLY option.
+ */
+CURL_EXTERN CURLcode curl_ws_recv(CURL *curl, void *buffer, size_t buflen,
+                                  size_t *recv,
+                                  struct curl_ws_frame **metap);
+
+/* sendflags for curl_ws_send() */
+#define CURLWS_PONG       (1<<6)
+
+/*
+ * NAME curl_easy_send()
+ *
+ * DESCRIPTION
+ *
+ * Sends data over the websocket connection. Use after successful
+ * curl_easy_perform() with CURLOPT_CONNECT_ONLY option.
+ */
+CURL_EXTERN CURLcode curl_ws_send(CURL *curl, const void *buffer,
+                                  size_t buflen, size_t *sent,
+                                  curl_off_t framesize,
+                                  unsigned int sendflags);
+
+/* bits for the CURLOPT_WS_OPTIONS bitmask: */
+#define CURLWS_RAW_MODE (1<<0)
+
+CURL_EXTERN struct curl_ws_frame *curl_ws_meta(CURL *curl);
+
+#ifdef  __cplusplus
+}
+#endif
+
+#endif /* CURLINC_WEBSOCKETS_H */