[Feature][ZXW-88]merge P50 version
Only Configure: No
Affected branch: master
Affected module: unknown
Is it affected on both ZXIC and MTK: only ZXIC
Self-test: Yes
Doc Update: No
Change-Id: I34667719d9e0e7e29e8e4368848601cde0a48408
diff --git a/ap/lib/libcurl/curl-7.86.0/packages/vms/curlmsg.msg b/ap/lib/libcurl/curl-7.86.0/packages/vms/curlmsg.msg
new file mode 100755
index 0000000..2122495
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/packages/vms/curlmsg.msg
@@ -0,0 +1,134 @@
+!***************************************************************************
+! _ _ ____ _
+! Project ___| | | | _ \| |
+! / __| | | | |_) | |
+! | (__| |_| | _ <| |___
+! \___|\___/|_| \_\_____|
+!
+! Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+!
+! This software is licensed as described in the file COPYING, which
+! you should have received as part of this distribution. The terms
+! are also available at https://curl.se/docs/copyright.html.
+!
+! You may opt to use, copy, modify, merge, publish, distribute and/or sell
+! copies of the Software, and permit persons to whom the Software is
+! furnished to do so, under the terms of the COPYING file.
+!
+! This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+! KIND, either express or implied.
+!
+! SPDX-License-Identifier: curl
+!
+!##########################################################################
+!
+! These VMS error codes are generated by taking apart the curl.h
+! file and putting all the CURLE_* enum stuff into this file,
+! CURLMSG.MSG. An .SDL file is created from this file with
+! MESSAGE/SDL. The .H file is created using the freeware SDL tool
+! against the .SDL file with SDL/ALPHA/LANG=CC command.
+!
+! With the exception of CURLE_OK, all of the messages are at
+! the error severity level. With the exception of
+! PEER_FAILED_VERIF, which is a shortened form of
+! PEER_FAILED_VERIFICATION, these are the same names as the
+! CURLE_ ones in include/curl.h. The Message Utility manual states
+! "The combined length of the prefix and the message symbol name cannot
+! exceed 31 characters." With a prefix of five that leaves us with 26
+! for the message name.
+!
+! If you update this file also update curlmsg_vms.h so that they are in sync
+!
+.TITLE CURLMSG Message files
+.FACILITY CURL,1793 /PREFIX=CURL_
+.BASE 1
+.SEVERITY SUCCESS
+OK <normal successful completion>
+
+.SEVERITY ERROR
+UNSUPPORTED_PROTOCOL <unsupported protocol>
+FAILED_INIT <failed init>
+URL_MALFORMAT <URL malformat>
+OBSOLETE4 <obsolete error code>
+COULDNT_RESOLVE_PROXY <could not resolve proxy>
+COULDNT_RESOLVE_HOST <could not resolve host>
+COULDNT_CONNECT <could not connect>
+WEIRD_SERVER_REPLY <weird server reply>
+FTP_ACCESS_DENIED <FTP access denied>
+OBSOLETE10 <obsolete error code>
+FTP_WEIRD_PASS_REPLY <FTP weird PASS reply>
+OBSOLETE12 <obsolete error code>
+FTP_WEIRD_PASV_REPLY <FTP weird PASV reply>
+FTP_WEIRD_227_FORMAT <FTP weird 227 format>
+FTP_CANT_GET_HOST <FTP can not get host>
+OBSOLETE16 <obsolete error code>
+FTP_COULDNT_SET_TYPE <FTP could not set type>
+PARTIAL_FILE <partial file>
+FTP_COULDNT_RETR_FILE <FTP could not RETR file>
+OBSOLETE20 <obsolete error code>
+QUOTE_ERROR <quote command error>
+HTTP_RETURNED_ERROR <HTTP returned error>
+WRITE_ERROR <write error>
+OBSOLETE24 <obsolete error code>
+UPLOAD_FAILED <failed upload command>
+READ_ERROR <read error, could not open/read file>
+OUT_OF_MEMORY <out of memory>
+OPERATION_TIMEOUTED <operation timed out, timeout time was reached>
+OBSOLETE29 <obsolete error code>
+FTP_PORT_FAILED <FTP PORT operation failed>
+FTP_COULDNT_USE_REST <FTP REST command failed>
+OBSOLETE32 <obsolete error code>
+RANGE_ERROR <RANGE command error>
+HTTP_POST_ERROR <HTTP POST error>
+SSL_CONNECT_ERROR <SSL connect error>
+BAD_DOWNLOAD_RESUME <bad download resume>
+FILE_COULDNT_READ_FILE <FILE could not read file>
+LDAP_CANNOT_BIND <LDAP cannot bind>
+LDAP_SEARCH_FAILED <LDAP search failed>
+OBSOLETE40 <obsolete error code>
+FUNCTION_NOT_FOUND <function not found>
+ABORTED_BY_CALLBACK <aborted by callback>
+BAD_FUNCTION_ARGUMENT <bad function argument>
+OBSOLETE44 <obsolete error code>
+INTERFACE_FAILED <CURLOPT_INTERFACE failed>
+OBSOLETE46 <obsolete error code>
+TOO_MANY_REDIRECTS <too many redirects>
+UNKNOWN_TELNET_OPTION <unknown TELNET option>
+TELNET_OPTION_SYNTAX <malformed TELNET option syntax>
+OBSOLETE50 <obsolete error code>
+PEER_FAILED_VERIF <peer certificate or fingerprint failed>
+GOT_NOTHING <got nothing>
+SSL_ENGINE_NOTFOUND <SSL crypto engine not found>
+SSL_ENGINE_SETFAILED <SSL can not set SSL crypto engine as default>
+SEND_ERROR <SEND error, failure sending network data>
+RECV_ERROR <RECV error, failure receiving network data>
+OBSOLETE57 <obsolete error code>
+SSL_CERTPROBLEM <SSL problem with the local certificate>
+SSL_CIPHER <SSL CIPHER, could not use specified cipher>
+SSL_CACERT <SSL CACERT, problem with the CA cert (path?)>
+BAD_CONTENT_ENCODING <unrecognized transfer encoding>
+LDAP_INVALID_URL <LDAP invalid url>
+FILESIZE_EXCEEDED <maximum file size exceeded>
+USE_SSL_FAILED <requested FTP SSL level failed>
+SEND_FAIL_REWIND <sending data requires a rewind that failed>
+SSL_ENGINE_INITFAILED <failed to initialise ENGINE>
+LOGIN_DENIED <user or password not accepted. failed to login>
+TFTP_NOTFOUND <file not found on server>
+TFTP_PERM <permission problem on server>
+REMOTE_DISK_FULL <out of disk space on server>
+TFTP_ILLEGAL <illegal TFTP operation>
+TFTP_UNKNOWNID <unknown transfer ID>
+REMOTE_FILE_EXISTS <file already exists>
+TFTP_NOSUCHUSER <no such user>
+CONV_FAILED <conversion failed>
+CONV_REQD <caller must register conversion callbacks>
+SSL_CACERT_BADFILE <could not load CACERT file>
+REMOTE_FILE_NOT_FOUND <remote file not found>
+SSH <unspecified error from the SSH layer>
+SSL_SHUTDOWN_FAILED <failed to shut down the SSL connection>
+AGAIN <socket not ready, wait and try again>
+SSL_CRL_BADFILE <could not load CRL file, missing or wrong format>
+SSL_ISSUER_ERROR <issuer check failed>
+CURL_LAST <CURLMSG.MSG is out of sync with the source code>
+
+.END