[Feature][ZXW-88]merge P50 version
Only Configure: No
Affected branch: master
Affected module: unknown
Is it affected on both ZXIC and MTK: only ZXIC
Self-test: Yes
Doc Update: No
Change-Id: I34667719d9e0e7e29e8e4368848601cde0a48408
diff --git a/ap/lib/libcurl/curl-7.86.0/tests/libtest/test.h b/ap/lib/libcurl/curl-7.86.0/tests/libtest/test.h
new file mode 100755
index 0000000..badad1d
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/tests/libtest/test.h
@@ -0,0 +1,496 @@
+/***************************************************************************
+ * _ _ ____ _
+ * Project ___| | | | _ \| |
+ * / __| | | | |_) | |
+ * | (__| |_| | _ <| |___
+ * \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * SPDX-License-Identifier: curl
+ *
+ ***************************************************************************/
+
+/* Now include the curl_setup.h file from libcurl's private libdir (the source
+ version, but that might include "curl_config.h" from the build dir so we
+ need both of them in the include path), so that we get good in-depth
+ knowledge about the system we're building this on */
+
+#define CURL_NO_OLDIES
+
+#include "curl_setup.h"
+
+#include <curl/curl.h>
+
+#ifdef HAVE_SYS_SELECT_H
+/* since so many tests use select(), we can just as well include it here */
+#include <sys/select.h>
+#elif defined(HAVE_UNISTD_H)
+#include <unistd.h>
+#endif
+
+#include "curl_printf.h"
+
+#define test_setopt(A,B,C) \
+ if((res = curl_easy_setopt((A), (B), (C))) != CURLE_OK) \
+ goto test_cleanup
+
+#define test_multi_setopt(A,B,C) \
+ if((res = curl_multi_setopt((A), (B), (C))) != CURLE_OK) \
+ goto test_cleanup
+
+extern char *libtest_arg2; /* set by first.c to the argv[2] or NULL */
+extern char *libtest_arg3; /* set by first.c to the argv[3] or NULL */
+
+/* argc and argv as passed in to the main() function */
+extern int test_argc;
+extern char **test_argv;
+
+extern struct timeval tv_test_start; /* for test timing */
+
+extern int select_wrapper(int nfds, fd_set *rd, fd_set *wr, fd_set *exc,
+ struct timeval *tv);
+
+extern void wait_ms(int ms); /* wait this many milliseconds */
+
+extern int test(char *URL); /* the actual test function provided by each
+ individual libXXX.c file */
+
+extern char *hexdump(const unsigned char *buffer, size_t len);
+
+#ifdef UNITTESTS
+extern int unitfail;
+#endif
+
+/*
+** TEST_ERR_* values must be greater than CURL_LAST CURLcode in order
+** to avoid confusion with any CURLcode or CURLMcode. These TEST_ERR_*
+** codes are returned to signal test specific situations and should
+** not get mixed with CURLcode or CURLMcode values.
+**
+** For portability reasons TEST_ERR_* values should be less than 127.
+*/
+
+#define TEST_ERR_MAJOR_BAD (CURLcode) 126
+#define TEST_ERR_RUNS_FOREVER (CURLcode) 125
+#define TEST_ERR_EASY_INIT (CURLcode) 124
+#define TEST_ERR_MULTI (CURLcode) 123
+#define TEST_ERR_NUM_HANDLES (CURLcode) 122
+#define TEST_ERR_SELECT (CURLcode) 121
+#define TEST_ERR_SUCCESS (CURLcode) 120
+#define TEST_ERR_FAILURE (CURLcode) 119
+#define TEST_ERR_USAGE (CURLcode) 118
+#define TEST_ERR_FOPEN (CURLcode) 117
+#define TEST_ERR_FSTAT (CURLcode) 116
+#define TEST_ERR_BAD_TIMEOUT (CURLcode) 115
+
+/*
+** Macros for test source code readability/maintainability.
+**
+** All of the following macros require that an int data type 'res' variable
+** exists in scope where macro is used, and that it has been initialized to
+** zero before the macro is used.
+**
+** exe_* and chk_* macros are helper macros not intended to be used from
+** outside of this header file. Arguments 'Y' and 'Z' of these represent
+** source code file and line number, while Arguments 'A', 'B', etc, are
+** the arguments used to actually call a libcurl function.
+**
+** All easy_* and multi_* macros call a libcurl function and evaluate if
+** the function has succeeded or failed. When the function succeeds 'res'
+** variable is not set nor cleared and program continues normal flow. On
+** the other hand if function fails 'res' variable is set and a jump to
+** label 'test_cleanup' is performed.
+**
+** Every easy_* and multi_* macros have a res_easy_* and res_multi_* macro
+** counterpart that operates in the same way with the exception that no
+** jump takes place in case of failure. res_easy_* and res_multi_* macros
+** should be immediately followed by checking if 'res' variable has been
+** set.
+**
+** 'res' variable when set will hold a CURLcode, CURLMcode, or any of the
+** TEST_ERR_* values defined above. It is advisable to return this value
+** as test result.
+*/
+
+/* ---------------------------------------------------------------- */
+
+#define exe_easy_init(A,Y,Z) do { \
+ if(((A) = curl_easy_init()) == NULL) { \
+ fprintf(stderr, "%s:%d curl_easy_init() failed\n", (Y), (Z)); \
+ res = TEST_ERR_EASY_INIT; \
+ } \
+} while(0)
+
+#define res_easy_init(A) \
+ exe_easy_init((A), (__FILE__), (__LINE__))
+
+#define chk_easy_init(A,Y,Z) do { \
+ exe_easy_init((A), (Y), (Z)); \
+ if(res) \
+ goto test_cleanup; \
+} while(0)
+
+#define easy_init(A) \
+ chk_easy_init((A), (__FILE__), (__LINE__))
+
+/* ---------------------------------------------------------------- */
+
+#define exe_multi_init(A,Y,Z) do { \
+ if(((A) = curl_multi_init()) == NULL) { \
+ fprintf(stderr, "%s:%d curl_multi_init() failed\n", (Y), (Z)); \
+ res = TEST_ERR_MULTI; \
+ } \
+} while(0)
+
+#define res_multi_init(A) \
+ exe_multi_init((A), (__FILE__), (__LINE__))
+
+#define chk_multi_init(A,Y,Z) do { \
+ exe_multi_init((A), (Y), (Z)); \
+ if(res) \
+ goto test_cleanup; \
+} while(0)
+
+#define multi_init(A) \
+ chk_multi_init((A), (__FILE__), (__LINE__))
+
+/* ---------------------------------------------------------------- */
+
+#define exe_easy_setopt(A,B,C,Y,Z) do { \
+ CURLcode ec; \
+ if((ec = curl_easy_setopt((A), (B), (C))) != CURLE_OK) { \
+ fprintf(stderr, "%s:%d curl_easy_setopt() failed, " \
+ "with code %d (%s)\n", \
+ (Y), (Z), (int)ec, curl_easy_strerror(ec)); \
+ res = ec; \
+ } \
+} while(0)
+
+#define res_easy_setopt(A, B, C) \
+ exe_easy_setopt((A), (B), (C), (__FILE__), (__LINE__))
+
+#define chk_easy_setopt(A, B, C, Y, Z) do { \
+ exe_easy_setopt((A), (B), (C), (Y), (Z)); \
+ if(res) \
+ goto test_cleanup; \
+} while(0)
+
+#define easy_setopt(A, B, C) \
+ chk_easy_setopt((A), (B), (C), (__FILE__), (__LINE__))
+
+/* ---------------------------------------------------------------- */
+
+#define exe_multi_setopt(A, B, C, Y, Z) do { \
+ CURLMcode ec; \
+ if((ec = curl_multi_setopt((A), (B), (C))) != CURLM_OK) { \
+ fprintf(stderr, "%s:%d curl_multi_setopt() failed, " \
+ "with code %d (%s)\n", \
+ (Y), (Z), (int)ec, curl_multi_strerror(ec)); \
+ res = TEST_ERR_MULTI; \
+ } \
+} while(0)
+
+#define res_multi_setopt(A,B,C) \
+ exe_multi_setopt((A), (B), (C), (__FILE__), (__LINE__))
+
+#define chk_multi_setopt(A,B,C,Y,Z) do { \
+ exe_multi_setopt((A), (B), (C), (Y), (Z)); \
+ if(res) \
+ goto test_cleanup; \
+} while(0)
+
+#define multi_setopt(A,B,C) \
+ chk_multi_setopt((A), (B), (C), (__FILE__), (__LINE__))
+
+/* ---------------------------------------------------------------- */
+
+#define exe_multi_add_handle(A,B,Y,Z) do { \
+ CURLMcode ec; \
+ if((ec = curl_multi_add_handle((A), (B))) != CURLM_OK) { \
+ fprintf(stderr, "%s:%d curl_multi_add_handle() failed, " \
+ "with code %d (%s)\n", \
+ (Y), (Z), (int)ec, curl_multi_strerror(ec)); \
+ res = TEST_ERR_MULTI; \
+ } \
+} while(0)
+
+#define res_multi_add_handle(A, B) \
+ exe_multi_add_handle((A), (B), (__FILE__), (__LINE__))
+
+#define chk_multi_add_handle(A, B, Y, Z) do { \
+ exe_multi_add_handle((A), (B), (Y), (Z)); \
+ if(res) \
+ goto test_cleanup; \
+} while(0)
+
+#define multi_add_handle(A, B) \
+ chk_multi_add_handle((A), (B), (__FILE__), (__LINE__))
+
+/* ---------------------------------------------------------------- */
+
+#define exe_multi_remove_handle(A,B,Y,Z) do { \
+ CURLMcode ec; \
+ if((ec = curl_multi_remove_handle((A), (B))) != CURLM_OK) { \
+ fprintf(stderr, "%s:%d curl_multi_remove_handle() failed, " \
+ "with code %d (%s)\n", \
+ (Y), (Z), (int)ec, curl_multi_strerror(ec)); \
+ res = TEST_ERR_MULTI; \
+ } \
+} while(0)
+
+#define res_multi_remove_handle(A, B) \
+ exe_multi_remove_handle((A), (B), (__FILE__), (__LINE__))
+
+#define chk_multi_remove_handle(A, B, Y, Z) do { \
+ exe_multi_remove_handle((A), (B), (Y), (Z)); \
+ if(res) \
+ goto test_cleanup; \
+} while(0)
+
+
+#define multi_remove_handle(A, B) \
+ chk_multi_remove_handle((A), (B), (__FILE__), (__LINE__))
+
+/* ---------------------------------------------------------------- */
+
+#define exe_multi_perform(A,B,Y,Z) do { \
+ CURLMcode ec; \
+ if((ec = curl_multi_perform((A), (B))) != CURLM_OK) { \
+ fprintf(stderr, "%s:%d curl_multi_perform() failed, " \
+ "with code %d (%s)\n", \
+ (Y), (Z), (int)ec, curl_multi_strerror(ec)); \
+ res = TEST_ERR_MULTI; \
+ } \
+ else if(*((B)) < 0) { \
+ fprintf(stderr, "%s:%d curl_multi_perform() succeeded, " \
+ "but returned invalid running_handles value (%d)\n", \
+ (Y), (Z), (int)*((B))); \
+ res = TEST_ERR_NUM_HANDLES; \
+ } \
+} while(0)
+
+#define res_multi_perform(A, B) \
+ exe_multi_perform((A), (B), (__FILE__), (__LINE__))
+
+#define chk_multi_perform(A, B, Y, Z) do { \
+ exe_multi_perform((A), (B), (Y), (Z)); \
+ if(res) \
+ goto test_cleanup; \
+} while(0)
+
+#define multi_perform(A,B) \
+ chk_multi_perform((A), (B), (__FILE__), (__LINE__))
+
+/* ---------------------------------------------------------------- */
+
+#define exe_multi_fdset(A, B, C, D, E, Y, Z) do { \
+ CURLMcode ec; \
+ if((ec = curl_multi_fdset((A), (B), (C), (D), (E))) != CURLM_OK) { \
+ fprintf(stderr, "%s:%d curl_multi_fdset() failed, " \
+ "with code %d (%s)\n", \
+ (Y), (Z), (int)ec, curl_multi_strerror(ec)); \
+ res = TEST_ERR_MULTI; \
+ } \
+ else if(*((E)) < -1) { \
+ fprintf(stderr, "%s:%d curl_multi_fdset() succeeded, " \
+ "but returned invalid max_fd value (%d)\n", \
+ (Y), (Z), (int)*((E))); \
+ res = TEST_ERR_NUM_HANDLES; \
+ } \
+} while(0)
+
+#define res_multi_fdset(A, B, C, D, E) \
+ exe_multi_fdset((A), (B), (C), (D), (E), (__FILE__), (__LINE__))
+
+#define chk_multi_fdset(A, B, C, D, E, Y, Z) do { \
+ exe_multi_fdset((A), (B), (C), (D), (E), (Y), (Z)); \
+ if(res) \
+ goto test_cleanup; \
+ } while(0)
+
+#define multi_fdset(A, B, C, D, E) \
+ chk_multi_fdset((A), (B), (C), (D), (E), (__FILE__), (__LINE__))
+
+/* ---------------------------------------------------------------- */
+
+#define exe_multi_timeout(A,B,Y,Z) do { \
+ CURLMcode ec; \
+ if((ec = curl_multi_timeout((A), (B))) != CURLM_OK) { \
+ fprintf(stderr, "%s:%d curl_multi_timeout() failed, " \
+ "with code %d (%s)\n", \
+ (Y), (Z), (int)ec, curl_multi_strerror(ec)); \
+ res = TEST_ERR_BAD_TIMEOUT; \
+ } \
+ else if(*((B)) < -1L) { \
+ fprintf(stderr, "%s:%d curl_multi_timeout() succeeded, " \
+ "but returned invalid timeout value (%ld)\n", \
+ (Y), (Z), (long)*((B))); \
+ res = TEST_ERR_BAD_TIMEOUT; \
+ } \
+} while(0)
+
+#define res_multi_timeout(A, B) \
+ exe_multi_timeout((A), (B), (__FILE__), (__LINE__))
+
+#define chk_multi_timeout(A, B, Y, Z) do { \
+ exe_multi_timeout((A), (B), (Y), (Z)); \
+ if(res) \
+ goto test_cleanup; \
+ } while(0)
+
+#define multi_timeout(A, B) \
+ chk_multi_timeout((A), (B), (__FILE__), (__LINE__))
+
+/* ---------------------------------------------------------------- */
+
+#define exe_multi_poll(A,B,C,D,E,Y,Z) do { \
+ CURLMcode ec; \
+ if((ec = curl_multi_poll((A), (B), (C), (D), (E))) != CURLM_OK) { \
+ fprintf(stderr, "%s:%d curl_multi_poll() failed, " \
+ "with code %d (%s)\n", \
+ (Y), (Z), (int)ec, curl_multi_strerror(ec)); \
+ res = TEST_ERR_MULTI; \
+ } \
+ else if(*((E)) < 0) { \
+ fprintf(stderr, "%s:%d curl_multi_poll() succeeded, " \
+ "but returned invalid numfds value (%d)\n", \
+ (Y), (Z), (int)*((E))); \
+ res = TEST_ERR_NUM_HANDLES; \
+ } \
+} while(0)
+
+#define res_multi_poll(A, B, C, D, E) \
+ exe_multi_poll((A), (B), (C), (D), (E), (__FILE__), (__LINE__))
+
+#define chk_multi_poll(A, B, C, D, E, Y, Z) do { \
+ exe_multi_poll((A), (B), (C), (D), (E), (Y), (Z)); \
+ if(res) \
+ goto test_cleanup; \
+} while(0)
+
+#define multi_poll(A, B, C, D, E) \
+ chk_multi_poll((A), (B), (C), (D), (E), (__FILE__), (__LINE__))
+
+/* ---------------------------------------------------------------- */
+
+#define exe_multi_wakeup(A,Y,Z) do { \
+ CURLMcode ec; \
+ if((ec = curl_multi_wakeup((A))) != CURLM_OK) { \
+ fprintf(stderr, "%s:%d curl_multi_wakeup() failed, " \
+ "with code %d (%s)\n", \
+ (Y), (Z), (int)ec, curl_multi_strerror(ec)); \
+ res = TEST_ERR_MULTI; \
+ } \
+} while(0)
+
+#define res_multi_wakeup(A) \
+ exe_multi_wakeup((A), (__FILE__), (__LINE__))
+
+#define chk_multi_wakeup(A, Y, Z) do { \
+ exe_multi_wakeup((A), (Y), (Z)); \
+ if(res) \
+ goto test_cleanup; \
+} while(0)
+
+#define multi_wakeup(A) \
+ chk_multi_wakeup((A), (__FILE__), (__LINE__))
+
+/* ---------------------------------------------------------------- */
+
+#define exe_select_test(A, B, C, D, E, Y, Z) do { \
+ int ec; \
+ if(select_wrapper((A), (B), (C), (D), (E)) == -1) { \
+ ec = SOCKERRNO; \
+ fprintf(stderr, "%s:%d select() failed, with " \
+ "errno %d (%s)\n", \
+ (Y), (Z), ec, strerror(ec)); \
+ res = TEST_ERR_SELECT; \
+ } \
+ } while(0)
+
+#define res_select_test(A, B, C, D, E) \
+ exe_select_test((A), (B), (C), (D), (E), (__FILE__), (__LINE__))
+
+#define chk_select_test(A, B, C, D, E, Y, Z) do { \
+ exe_select_test((A), (B), (C), (D), (E), (Y), (Z)); \
+ if(res) \
+ goto test_cleanup; \
+ } while(0)
+
+#define select_test(A, B, C, D, E) \
+ chk_select_test((A), (B), (C), (D), (E), (__FILE__), (__LINE__))
+
+/* ---------------------------------------------------------------- */
+
+#define start_test_timing() do { \
+ tv_test_start = tutil_tvnow(); \
+} while(0)
+
+#define exe_test_timedout(Y,Z) do { \
+ if(tutil_tvdiff(tutil_tvnow(), tv_test_start) > TEST_HANG_TIMEOUT) { \
+ fprintf(stderr, "%s:%d ABORTING TEST, since it seems " \
+ "that it would have run forever.\n", (Y), (Z)); \
+ res = TEST_ERR_RUNS_FOREVER; \
+ } \
+} while(0)
+
+#define res_test_timedout() \
+ exe_test_timedout((__FILE__), (__LINE__))
+
+#define chk_test_timedout(Y, Z) do { \
+ exe_test_timedout(Y, Z); \
+ if(res) \
+ goto test_cleanup; \
+ } while(0)
+
+#define abort_on_test_timeout() \
+ chk_test_timedout((__FILE__), (__LINE__))
+
+/* ---------------------------------------------------------------- */
+
+#define exe_global_init(A,Y,Z) do { \
+ CURLcode ec; \
+ if((ec = curl_global_init((A))) != CURLE_OK) { \
+ fprintf(stderr, "%s:%d curl_global_init() failed, " \
+ "with code %d (%s)\n", \
+ (Y), (Z), (int)ec, curl_easy_strerror(ec)); \
+ res = ec; \
+ } \
+} while(0)
+
+#define res_global_init(A) \
+ exe_global_init((A), (__FILE__), (__LINE__))
+
+#define chk_global_init(A, Y, Z) do { \
+ exe_global_init((A), (Y), (Z)); \
+ if(res) \
+ return res; \
+ } while(0)
+
+/* global_init() is different than other macros. In case of
+ failure it 'return's instead of going to 'test_cleanup'. */
+
+#define global_init(A) \
+ chk_global_init((A), (__FILE__), (__LINE__))
+
+#define NO_SUPPORT_BUILT_IN \
+ int test(char *URL) \
+ { \
+ (void)URL; \
+ fprintf(stderr, "Missing support\n"); \
+ return 1; \
+ }
+
+/* ---------------------------------------------------------------- */