[Feature][ZXW-88]merge P50 version

Only Configure: No
Affected branch: master
Affected module: unknown
Is it affected on both ZXIC and MTK: only ZXIC
Self-test: Yes
Doc Update: No

Change-Id: I34667719d9e0e7e29e8e4368848601cde0a48408
diff --git a/ap/lib/libcurl/curl-7.86.0/tests/server/rtspd.c b/ap/lib/libcurl/curl-7.86.0/tests/server/rtspd.c
new file mode 100755
index 0000000..32ab0af
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/tests/server/rtspd.c
@@ -0,0 +1,1393 @@
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * SPDX-License-Identifier: curl
+ *
+ ***************************************************************************/
+#include "server_setup.h"
+
+/*
+ * curl's test suite Real Time Streaming Protocol (RTSP) server.
+ *
+ * This source file was started based on curl's HTTP test suite server.
+ */
+
+#ifdef HAVE_SIGNAL_H
+#include <signal.h>
+#endif
+#ifdef HAVE_NETINET_IN_H
+#include <netinet/in.h>
+#endif
+#ifdef HAVE_NETINET_IN6_H
+#include <netinet/in6.h>
+#endif
+#ifdef HAVE_ARPA_INET_H
+#include <arpa/inet.h>
+#endif
+#ifdef HAVE_NETDB_H
+#include <netdb.h>
+#endif
+#ifdef HAVE_NETINET_TCP_H
+#include <netinet/tcp.h> /* for TCP_NODELAY */
+#endif
+
+#define ENABLE_CURLX_PRINTF
+/* make the curlx header define all printf() functions to use the curlx_*
+   versions instead */
+#include "curlx.h" /* from the private lib dir */
+#include "getpart.h"
+#include "util.h"
+#include "server_sockaddr.h"
+
+/* include memdebug.h last */
+#include "memdebug.h"
+
+#ifdef USE_WINSOCK
+#undef  EINTR
+#define EINTR    4 /* errno.h value */
+#undef  ERANGE
+#define ERANGE  34 /* errno.h value */
+#endif
+
+#ifdef ENABLE_IPV6
+static bool use_ipv6 = FALSE;
+#endif
+static const char *ipv_inuse = "IPv4";
+static int serverlogslocked = 0;
+
+#define REQBUFSIZ 150000
+#define REQBUFSIZ_TXT "149999"
+
+static long prevtestno = -1;    /* previous test number we served */
+static long prevpartno = -1;    /* previous part number we served */
+static bool prevbounce = FALSE; /* instructs the server to increase the part
+                                   number for a test in case the identical
+                                   testno+partno request shows up again */
+
+#define RCMD_NORMALREQ 0 /* default request, use the tests file normally */
+#define RCMD_IDLE      1 /* told to sit idle */
+#define RCMD_STREAM    2 /* told to stream */
+
+typedef enum {
+  RPROT_NONE = 0,
+  RPROT_RTSP = 1,
+  RPROT_HTTP = 2
+} reqprot_t;
+
+#define SET_RTP_PKT_CHN(p,c)  ((p)[1] = (unsigned char)((c) & 0xFF))
+
+#define SET_RTP_PKT_LEN(p,l) (((p)[2] = (unsigned char)(((l) >> 8) & 0xFF)), \
+                              ((p)[3] = (unsigned char)((l) & 0xFF)))
+
+struct httprequest {
+  char reqbuf[REQBUFSIZ]; /* buffer area for the incoming request */
+  size_t checkindex; /* where to start checking of the request */
+  size_t offset;     /* size of the incoming request */
+  long testno;       /* test number found in the request */
+  long partno;       /* part number found in the request */
+  bool open;      /* keep connection open info, as found in the request */
+  bool auth_req;  /* authentication required, don't wait for body unless
+                     there's an Authorization header */
+  bool auth;      /* Authorization header present in the incoming request */
+  size_t cl;      /* Content-Length of the incoming request */
+  bool digest;    /* Authorization digest header found */
+  bool ntlm;      /* Authorization ntlm header found */
+  int pipe;       /* if non-zero, expect this many requests to do a "piped"
+                     request/response */
+  int skip;       /* if non-zero, the server is instructed to not read this
+                     many bytes from a PUT/POST request. Ie the client sends N
+                     bytes said in Content-Length, but the server only reads N
+                     - skip bytes. */
+  int rcmd;       /* doing a special command, see defines above */
+  reqprot_t protocol; /* request protocol, HTTP or RTSP */
+  int prot_version;   /* HTTP or RTSP version (major*10 + minor) */
+  bool pipelining;    /* true if request is pipelined */
+  char *rtp_buffer;
+  size_t rtp_buffersize;
+};
+
+static int ProcessRequest(struct httprequest *req);
+static void storerequest(char *reqbuf, size_t totalsize);
+
+#define DEFAULT_PORT 8999
+
+#ifndef DEFAULT_LOGFILE
+#define DEFAULT_LOGFILE "log/rtspd.log"
+#endif
+
+const char *serverlogfile = DEFAULT_LOGFILE;
+
+#define RTSPDVERSION "curl test suite RTSP server/0.1"
+
+#define REQUEST_DUMP  "log/server.input"
+#define RESPONSE_DUMP "log/server.response"
+
+/* very-big-path support */
+#define MAXDOCNAMELEN 140000
+#define MAXDOCNAMELEN_TXT "139999"
+
+#define REQUEST_KEYWORD_SIZE 256
+#define REQUEST_KEYWORD_SIZE_TXT "255"
+
+#define CMD_AUTH_REQUIRED "auth_required"
+
+/* 'idle' means that it will accept the request fine but never respond
+   any data. Just keep the connection alive. */
+#define CMD_IDLE "idle"
+
+/* 'stream' means to send a never-ending stream of data */
+#define CMD_STREAM "stream"
+
+#define END_OF_HEADERS "\r\n\r\n"
+
+enum {
+  DOCNUMBER_NOTHING = -7,
+  DOCNUMBER_QUIT    = -6,
+  DOCNUMBER_BADCONNECT = -5,
+  DOCNUMBER_INTERNAL = -4,
+  DOCNUMBER_CONNECT = -3,
+  DOCNUMBER_WERULEZ = -2,
+  DOCNUMBER_404     = -1
+};
+
+
+/* sent as reply to a QUIT */
+static const char *docquit =
+"HTTP/1.1 200 Goodbye" END_OF_HEADERS;
+
+/* sent as reply to a CONNECT */
+static const char *docconnect =
+"HTTP/1.1 200 Mighty fine indeed" END_OF_HEADERS;
+
+/* sent as reply to a "bad" CONNECT */
+static const char *docbadconnect =
+"HTTP/1.1 501 Forbidden you fool" END_OF_HEADERS;
+
+/* send back this on HTTP 404 file not found */
+static const char *doc404_HTTP = "HTTP/1.1 404 Not Found\r\n"
+    "Server: " RTSPDVERSION "\r\n"
+    "Connection: close\r\n"
+    "Content-Type: text/html"
+    END_OF_HEADERS
+    "<!DOCTYPE HTML PUBLIC \"-//IETF//DTD HTML 2.0//EN\">\n"
+    "<HTML><HEAD>\n"
+    "<TITLE>404 Not Found</TITLE>\n"
+    "</HEAD><BODY>\n"
+    "<H1>Not Found</H1>\n"
+    "The requested URL was not found on this server.\n"
+    "<P><HR><ADDRESS>" RTSPDVERSION "</ADDRESS>\n" "</BODY></HTML>\n";
+
+/* send back this on RTSP 404 file not found */
+static const char *doc404_RTSP = "RTSP/1.0 404 Not Found\r\n"
+    "Server: " RTSPDVERSION
+    END_OF_HEADERS;
+
+/* Default size to send away fake RTP data */
+#define RTP_DATA_SIZE 12
+static const char *RTP_DATA = "$_1234\n\0asdf";
+
+static int ProcessRequest(struct httprequest *req)
+{
+  char *line = &req->reqbuf[req->checkindex];
+  bool chunked = FALSE;
+  static char request[REQUEST_KEYWORD_SIZE];
+  static char doc[MAXDOCNAMELEN];
+  static char prot_str[5];
+  int prot_major, prot_minor;
+  char *end = strstr(line, END_OF_HEADERS);
+
+  logmsg("ProcessRequest() called with testno %ld and line [%s]",
+         req->testno, line);
+
+  /* try to figure out the request characteristics as soon as possible, but
+     only once! */
+  if((req->testno == DOCNUMBER_NOTHING) &&
+     sscanf(line,
+            "%" REQUEST_KEYWORD_SIZE_TXT"s %" MAXDOCNAMELEN_TXT "s %4s/%d.%d",
+            request,
+            doc,
+            prot_str,
+            &prot_major,
+            &prot_minor) == 5) {
+    char *ptr;
+    char logbuf[256];
+
+    if(!strcmp(prot_str, "HTTP")) {
+      req->protocol = RPROT_HTTP;
+    }
+    else if(!strcmp(prot_str, "RTSP")) {
+      req->protocol = RPROT_RTSP;
+    }
+    else {
+      req->protocol = RPROT_NONE;
+      logmsg("got unknown protocol %s", prot_str);
+      return 1;
+    }
+
+    req->prot_version = prot_major*10 + prot_minor;
+
+    /* find the last slash */
+    ptr = strrchr(doc, '/');
+
+    /* get the number after it */
+    if(ptr) {
+      FILE *stream;
+      if((strlen(doc) + strlen(request)) < 200)
+        msnprintf(logbuf, sizeof(logbuf), "Got request: %s %s %s/%d.%d",
+                  request, doc, prot_str, prot_major, prot_minor);
+      else
+        msnprintf(logbuf, sizeof(logbuf), "Got a *HUGE* request %s/%d.%d",
+                  prot_str, prot_major, prot_minor);
+      logmsg("%s", logbuf);
+
+      if(!strncmp("/verifiedserver", ptr, 15)) {
+        logmsg("Are-we-friendly question received");
+        req->testno = DOCNUMBER_WERULEZ;
+        return 1; /* done */
+      }
+
+      if(!strncmp("/quit", ptr, 5)) {
+        logmsg("Request-to-quit received");
+        req->testno = DOCNUMBER_QUIT;
+        return 1; /* done */
+      }
+
+      ptr++; /* skip the slash */
+
+      /* skip all non-numericals following the slash */
+      while(*ptr && !ISDIGIT(*ptr))
+        ptr++;
+
+      req->testno = strtol(ptr, &ptr, 10);
+
+      if(req->testno > 10000) {
+        req->partno = req->testno % 10000;
+        req->testno /= 10000;
+      }
+      else
+        req->partno = 0;
+
+      msnprintf(logbuf, sizeof(logbuf), "Requested test number %ld part %ld",
+                req->testno, req->partno);
+      logmsg("%s", logbuf);
+
+      stream = test2fopen(req->testno);
+
+      if(!stream) {
+        int error = errno;
+        logmsg("fopen() failed with error: %d %s", error, strerror(error));
+        logmsg("Couldn't open test file %ld", req->testno);
+        req->open = FALSE; /* closes connection */
+        return 1; /* done */
+      }
+      else {
+        char *cmd = NULL;
+        size_t cmdsize = 0;
+        int num = 0;
+
+        int rtp_channel = 0;
+        int rtp_size = 0;
+        int rtp_partno = -1;
+        char *rtp_scratch = NULL;
+
+        /* get the custom server control "commands" */
+        int error = getpart(&cmd, &cmdsize, "reply", "servercmd", stream);
+        fclose(stream);
+        if(error) {
+          logmsg("getpart() failed with error: %d", error);
+          req->open = FALSE; /* closes connection */
+          return 1; /* done */
+        }
+        ptr = cmd;
+
+        if(cmdsize) {
+          logmsg("Found a reply-servercmd section!");
+          do {
+            if(!strncmp(CMD_AUTH_REQUIRED, ptr, strlen(CMD_AUTH_REQUIRED))) {
+              logmsg("instructed to require authorization header");
+              req->auth_req = TRUE;
+            }
+            else if(!strncmp(CMD_IDLE, ptr, strlen(CMD_IDLE))) {
+              logmsg("instructed to idle");
+              req->rcmd = RCMD_IDLE;
+              req->open = TRUE;
+            }
+            else if(!strncmp(CMD_STREAM, ptr, strlen(CMD_STREAM))) {
+              logmsg("instructed to stream");
+              req->rcmd = RCMD_STREAM;
+            }
+            else if(1 == sscanf(ptr, "pipe: %d", &num)) {
+              logmsg("instructed to allow a pipe size of %d", num);
+              if(num < 0)
+                logmsg("negative pipe size ignored");
+              else if(num > 0)
+                req->pipe = num-1; /* decrease by one since we don't count the
+                                      first request in this number */
+            }
+            else if(1 == sscanf(ptr, "skip: %d", &num)) {
+              logmsg("instructed to skip this number of bytes %d", num);
+              req->skip = num;
+            }
+            else if(3 == sscanf(ptr, "rtp: part %d channel %d size %d",
+                                &rtp_partno, &rtp_channel, &rtp_size)) {
+
+              if(rtp_partno == req->partno) {
+                int i = 0;
+                logmsg("RTP: part %d channel %d size %d",
+                       rtp_partno, rtp_channel, rtp_size);
+
+                /* Make our scratch buffer enough to fit all the
+                 * desired data and one for padding */
+                rtp_scratch = malloc(rtp_size + 4 + RTP_DATA_SIZE);
+
+                /* RTP is signalled with a $ */
+                rtp_scratch[0] = '$';
+
+                /* The channel follows and is one byte */
+                SET_RTP_PKT_CHN(rtp_scratch, rtp_channel);
+
+                /* Length follows and is a two byte short in network order */
+                SET_RTP_PKT_LEN(rtp_scratch, rtp_size);
+
+                /* Fill it with junk data */
+                for(i = 0; i < rtp_size; i += RTP_DATA_SIZE) {
+                  memcpy(rtp_scratch + 4 + i, RTP_DATA, RTP_DATA_SIZE);
+                }
+
+                if(!req->rtp_buffer) {
+                  req->rtp_buffer = rtp_scratch;
+                  req->rtp_buffersize = rtp_size + 4;
+                }
+                else {
+                  req->rtp_buffer = realloc(req->rtp_buffer,
+                                            req->rtp_buffersize +
+                                            rtp_size + 4);
+                  memcpy(req->rtp_buffer + req->rtp_buffersize, rtp_scratch,
+                         rtp_size + 4);
+                  req->rtp_buffersize += rtp_size + 4;
+                  free(rtp_scratch);
+                }
+                logmsg("rtp_buffersize is %zu, rtp_size is %d.",
+                       req->rtp_buffersize, rtp_size);
+              }
+            }
+            else {
+              logmsg("funny instruction found: %s", ptr);
+            }
+
+            ptr = strchr(ptr, '\n');
+            if(ptr)
+              ptr++;
+            else
+              ptr = NULL;
+          } while(ptr && *ptr);
+          logmsg("Done parsing server commands");
+        }
+        free(cmd);
+      }
+    }
+    else {
+      if(sscanf(req->reqbuf, "CONNECT %" MAXDOCNAMELEN_TXT "s HTTP/%d.%d",
+                doc, &prot_major, &prot_minor) == 3) {
+        msnprintf(logbuf, sizeof(logbuf),
+                  "Received a CONNECT %s HTTP/%d.%d request",
+                  doc, prot_major, prot_minor);
+        logmsg("%s", logbuf);
+
+        if(req->prot_version == 10)
+          req->open = FALSE; /* HTTP 1.0 closes connection by default */
+
+        if(!strncmp(doc, "bad", 3))
+          /* if the host name starts with bad, we fake an error here */
+          req->testno = DOCNUMBER_BADCONNECT;
+        else if(!strncmp(doc, "test", 4)) {
+          /* if the host name starts with test, the port number used in the
+             CONNECT line will be used as test number! */
+          char *portp = strchr(doc, ':');
+          if(portp && (*(portp + 1) != '\0') && ISDIGIT(*(portp + 1)))
+            req->testno = strtol(portp + 1, NULL, 10);
+          else
+            req->testno = DOCNUMBER_CONNECT;
+        }
+        else
+          req->testno = DOCNUMBER_CONNECT;
+      }
+      else {
+        logmsg("Did not find test number in PATH");
+        req->testno = DOCNUMBER_404;
+      }
+    }
+  }
+
+  if(!end) {
+    /* we don't have a complete request yet! */
+    logmsg("ProcessRequest returned without a complete request");
+    return 0; /* not complete yet */
+  }
+  logmsg("ProcessRequest found a complete request");
+
+  if(req->pipe)
+    /* we do have a full set, advance the checkindex to after the end of the
+       headers, for the pipelining case mostly */
+    req->checkindex += (end - line) + strlen(END_OF_HEADERS);
+
+  /* **** Persistence ****
+   *
+   * If the request is a HTTP/1.0 one, we close the connection unconditionally
+   * when we're done.
+   *
+   * If the request is a HTTP/1.1 one, we MUST check for a "Connection:"
+   * header that might say "close". If it does, we close a connection when
+   * this request is processed. Otherwise, we keep the connection alive for X
+   * seconds.
+   */
+
+  do {
+    if(got_exit_signal)
+      return 1; /* done */
+
+    if((req->cl == 0) && strncasecompare("Content-Length:", line, 15)) {
+      /* If we don't ignore content-length, we read it and we read the whole
+         request including the body before we return. If we've been told to
+         ignore the content-length, we will return as soon as all headers
+         have been received */
+      char *endptr;
+      char *ptr = line + 15;
+      unsigned long clen = 0;
+      while(*ptr && ISSPACE(*ptr))
+        ptr++;
+      endptr = ptr;
+      errno = 0;
+      clen = strtoul(ptr, &endptr, 10);
+      if((ptr == endptr) || !ISSPACE(*endptr) || (ERANGE == errno)) {
+        /* this assumes that a zero Content-Length is valid */
+        logmsg("Found invalid Content-Length: (%s) in the request", ptr);
+        req->open = FALSE; /* closes connection */
+        return 1; /* done */
+      }
+      req->cl = clen - req->skip;
+
+      logmsg("Found Content-Length: %lu in the request", clen);
+      if(req->skip)
+        logmsg("... but will abort after %zu bytes", req->cl);
+      break;
+    }
+    else if(strncasecompare("Transfer-Encoding: chunked", line,
+                            strlen("Transfer-Encoding: chunked"))) {
+      /* chunked data coming in */
+      chunked = TRUE;
+    }
+
+    if(chunked) {
+      if(strstr(req->reqbuf, "\r\n0\r\n\r\n"))
+        /* end of chunks reached */
+        return 1; /* done */
+      else
+        return 0; /* not done */
+    }
+
+    line = strchr(line, '\n');
+    if(line)
+      line++;
+
+  } while(line);
+
+  if(!req->auth && strstr(req->reqbuf, "Authorization:")) {
+    req->auth = TRUE; /* Authorization: header present! */
+    if(req->auth_req)
+      logmsg("Authorization header found, as required");
+  }
+
+  if(!req->digest && strstr(req->reqbuf, "Authorization: Digest")) {
+    /* If the client is passing this Digest-header, we set the part number
+       to 1000. Not only to spice up the complexity of this, but to make
+       Digest stuff to work in the test suite. */
+    req->partno += 1000;
+    req->digest = TRUE; /* header found */
+    logmsg("Received Digest request, sending back data %ld", req->partno);
+  }
+  else if(!req->ntlm &&
+          strstr(req->reqbuf, "Authorization: NTLM TlRMTVNTUAAD")) {
+    /* If the client is passing this type-3 NTLM header */
+    req->partno += 1002;
+    req->ntlm = TRUE; /* NTLM found */
+    logmsg("Received NTLM type-3, sending back data %ld", req->partno);
+    if(req->cl) {
+      logmsg("  Expecting %zu POSTed bytes", req->cl);
+    }
+  }
+  else if(!req->ntlm &&
+          strstr(req->reqbuf, "Authorization: NTLM TlRMTVNTUAAB")) {
+    /* If the client is passing this type-1 NTLM header */
+    req->partno += 1001;
+    req->ntlm = TRUE; /* NTLM found */
+    logmsg("Received NTLM type-1, sending back data %ld", req->partno);
+  }
+  else if((req->partno >= 1000) &&
+          strstr(req->reqbuf, "Authorization: Basic")) {
+    /* If the client is passing this Basic-header and the part number is
+       already >=1000, we add 1 to the part number.  This allows simple Basic
+       authentication negotiation to work in the test suite. */
+    req->partno += 1;
+    logmsg("Received Basic request, sending back data %ld", req->partno);
+  }
+  if(strstr(req->reqbuf, "Connection: close"))
+    req->open = FALSE; /* close connection after this request */
+
+  if(!req->pipe &&
+     req->open &&
+     req->prot_version >= 11 &&
+     req->reqbuf + req->offset > end + strlen(END_OF_HEADERS) &&
+     (!strncmp(req->reqbuf, "GET", strlen("GET")) ||
+      !strncmp(req->reqbuf, "HEAD", strlen("HEAD")))) {
+    /* If we have a persistent connection, HTTP version >= 1.1
+       and GET/HEAD request, enable pipelining. */
+    req->checkindex = (end - req->reqbuf) + strlen(END_OF_HEADERS);
+    req->pipelining = TRUE;
+  }
+
+  while(req->pipe) {
+    if(got_exit_signal)
+      return 1; /* done */
+    /* scan for more header ends within this chunk */
+    line = &req->reqbuf[req->checkindex];
+    end = strstr(line, END_OF_HEADERS);
+    if(!end)
+      break;
+    req->checkindex += (end - line) + strlen(END_OF_HEADERS);
+    req->pipe--;
+  }
+
+  /* If authentication is required and no auth was provided, end now. This
+     makes the server NOT wait for PUT/POST data and you can then make the
+     test case send a rejection before any such data has been sent. Test case
+     154 uses this.*/
+  if(req->auth_req && !req->auth)
+    return 1; /* done */
+
+  if(req->cl > 0) {
+    if(req->cl <= req->offset - (end - req->reqbuf) - strlen(END_OF_HEADERS))
+      return 1; /* done */
+    else
+      return 0; /* not complete yet */
+  }
+
+  return 1; /* done */
+}
+
+/* store the entire request in a file */
+static void storerequest(char *reqbuf, size_t totalsize)
+{
+  int res;
+  int error = 0;
+  size_t written;
+  size_t writeleft;
+  FILE *dump;
+
+  if(!reqbuf)
+    return;
+  if(totalsize == 0)
+    return;
+
+  do {
+    dump = fopen(REQUEST_DUMP, "ab");
+  } while(!dump && ((error = errno) == EINTR));
+  if(!dump) {
+    logmsg("Error opening file %s error: %d %s",
+           REQUEST_DUMP, error, strerror(error));
+    logmsg("Failed to write request input to " REQUEST_DUMP);
+    return;
+  }
+
+  writeleft = totalsize;
+  do {
+    written = fwrite(&reqbuf[totalsize-writeleft],
+                     1, writeleft, dump);
+    if(got_exit_signal)
+      goto storerequest_cleanup;
+    if(written > 0)
+      writeleft -= written;
+  } while((writeleft > 0) && ((error = errno) == EINTR));
+
+  if(writeleft == 0)
+    logmsg("Wrote request (%zu bytes) input to " REQUEST_DUMP, totalsize);
+  else if(writeleft > 0) {
+    logmsg("Error writing file %s error: %d %s",
+           REQUEST_DUMP, error, strerror(error));
+    logmsg("Wrote only (%zu bytes) of (%zu bytes) request input to %s",
+           totalsize-writeleft, totalsize, REQUEST_DUMP);
+  }
+
+storerequest_cleanup:
+
+  do {
+    res = fclose(dump);
+  } while(res && ((error = errno) == EINTR));
+  if(res)
+    logmsg("Error closing file %s error: %d %s",
+           REQUEST_DUMP, error, strerror(error));
+}
+
+/* return 0 on success, non-zero on failure */
+static int get_request(curl_socket_t sock, struct httprequest *req)
+{
+  int error;
+  int fail = 0;
+  int done_processing = 0;
+  char *reqbuf = req->reqbuf;
+  ssize_t got = 0;
+
+  char *pipereq = NULL;
+  size_t pipereq_length = 0;
+
+  if(req->pipelining) {
+    pipereq = reqbuf + req->checkindex;
+    pipereq_length = req->offset - req->checkindex;
+  }
+
+  /*** Init the httprequest structure properly for the upcoming request ***/
+
+  req->checkindex = 0;
+  req->offset = 0;
+  req->testno = DOCNUMBER_NOTHING;
+  req->partno = 0;
+  req->open = TRUE;
+  req->auth_req = FALSE;
+  req->auth = FALSE;
+  req->cl = 0;
+  req->digest = FALSE;
+  req->ntlm = FALSE;
+  req->pipe = 0;
+  req->skip = 0;
+  req->rcmd = RCMD_NORMALREQ;
+  req->protocol = RPROT_NONE;
+  req->prot_version = 0;
+  req->pipelining = FALSE;
+  req->rtp_buffer = NULL;
+  req->rtp_buffersize = 0;
+
+  /*** end of httprequest init ***/
+
+  while(!done_processing && (req->offset < REQBUFSIZ-1)) {
+    if(pipereq_length && pipereq) {
+      memmove(reqbuf, pipereq, pipereq_length);
+      got = curlx_uztosz(pipereq_length);
+      pipereq_length = 0;
+    }
+    else {
+      if(req->skip)
+        /* we are instructed to not read the entire thing, so we make sure to
+           only read what we're supposed to and NOT read the enire thing the
+           client wants to send! */
+        got = sread(sock, reqbuf + req->offset, req->cl);
+      else
+        got = sread(sock, reqbuf + req->offset, REQBUFSIZ-1 - req->offset);
+    }
+    if(got_exit_signal)
+      return 1;
+    if(got == 0) {
+      logmsg("Connection closed by client");
+      fail = 1;
+    }
+    else if(got < 0) {
+      error = SOCKERRNO;
+      logmsg("recv() returned error: (%d) %s", error, strerror(error));
+      fail = 1;
+    }
+    if(fail) {
+      /* dump the request received so far to the external file */
+      reqbuf[req->offset] = '\0';
+      storerequest(reqbuf, req->offset);
+      return 1;
+    }
+
+    logmsg("Read %zd bytes", got);
+
+    req->offset += (size_t)got;
+    reqbuf[req->offset] = '\0';
+
+    done_processing = ProcessRequest(req);
+    if(got_exit_signal)
+      return 1;
+    if(done_processing && req->pipe) {
+      logmsg("Waiting for another piped request");
+      done_processing = 0;
+      req->pipe--;
+    }
+  }
+
+  if((req->offset == REQBUFSIZ-1) && (got > 0)) {
+    logmsg("Request would overflow buffer, closing connection");
+    /* dump request received so far to external file anyway */
+    reqbuf[REQBUFSIZ-1] = '\0';
+    fail = 1;
+  }
+  else if(req->offset > REQBUFSIZ-1) {
+    logmsg("Request buffer overflow, closing connection");
+    /* dump request received so far to external file anyway */
+    reqbuf[REQBUFSIZ-1] = '\0';
+    fail = 1;
+  }
+  else
+    reqbuf[req->offset] = '\0';
+
+  /* dump the request to an external file */
+  storerequest(reqbuf, req->pipelining ? req->checkindex : req->offset);
+  if(got_exit_signal)
+    return 1;
+
+  return fail; /* return 0 on success */
+}
+
+/* returns -1 on failure */
+static int send_doc(curl_socket_t sock, struct httprequest *req)
+{
+  ssize_t written;
+  size_t count;
+  const char *buffer;
+  char *ptr = NULL;
+  char *cmd = NULL;
+  size_t cmdsize = 0;
+  FILE *dump;
+  bool persistent = TRUE;
+  bool sendfailure = FALSE;
+  size_t responsesize;
+  int error = 0;
+  int res;
+
+  static char weare[256];
+
+  logmsg("Send response number %ld part %ld", req->testno, req->partno);
+
+  switch(req->rcmd) {
+  default:
+  case RCMD_NORMALREQ:
+    break; /* continue with business as usual */
+  case RCMD_STREAM:
+#define STREAMTHIS "a string to stream 01234567890\n"
+    count = strlen(STREAMTHIS);
+    for(;;) {
+      written = swrite(sock, STREAMTHIS, count);
+      if(got_exit_signal)
+        return -1;
+      if(written != (ssize_t)count) {
+        logmsg("Stopped streaming");
+        break;
+      }
+    }
+    return -1;
+  case RCMD_IDLE:
+    /* Do nothing. Sit idle. Pretend it rains. */
+    return 0;
+  }
+
+  req->open = FALSE;
+
+  if(req->testno < 0) {
+    size_t msglen;
+    char msgbuf[64];
+
+    switch(req->testno) {
+    case DOCNUMBER_QUIT:
+      logmsg("Replying to QUIT");
+      buffer = docquit;
+      break;
+    case DOCNUMBER_WERULEZ:
+      /* we got a "friends?" question, reply back that we sure are */
+      logmsg("Identifying ourselves as friends");
+      msnprintf(msgbuf, sizeof(msgbuf), "RTSP_SERVER WE ROOLZ: %"
+                CURL_FORMAT_CURL_OFF_T "\r\n", our_getpid());
+      msglen = strlen(msgbuf);
+      msnprintf(weare, sizeof(weare),
+                "HTTP/1.1 200 OK\r\nContent-Length: %zu\r\n\r\n%s",
+                msglen, msgbuf);
+      buffer = weare;
+      break;
+    case DOCNUMBER_INTERNAL:
+      logmsg("Bailing out due to internal error");
+      return -1;
+    case DOCNUMBER_CONNECT:
+      logmsg("Replying to CONNECT");
+      buffer = docconnect;
+      break;
+    case DOCNUMBER_BADCONNECT:
+      logmsg("Replying to a bad CONNECT");
+      buffer = docbadconnect;
+      break;
+    case DOCNUMBER_404:
+    default:
+      logmsg("Replying to with a 404");
+      if(req->protocol == RPROT_HTTP) {
+        buffer = doc404_HTTP;
+      }
+      else {
+        buffer = doc404_RTSP;
+      }
+      break;
+    }
+
+    count = strlen(buffer);
+  }
+  else {
+    FILE *stream = test2fopen(req->testno);
+    char partbuf[80]="data";
+    if(0 != req->partno)
+      msnprintf(partbuf, sizeof(partbuf), "data%ld", req->partno);
+    if(!stream) {
+      error = errno;
+      logmsg("fopen() failed with error: %d %s", error, strerror(error));
+      logmsg("Couldn't open test file");
+      return 0;
+    }
+    else {
+      error = getpart(&ptr, &count, "reply", partbuf, stream);
+      fclose(stream);
+      if(error) {
+        logmsg("getpart() failed with error: %d", error);
+        return 0;
+      }
+      buffer = ptr;
+    }
+
+    if(got_exit_signal) {
+      free(ptr);
+      return -1;
+    }
+
+    /* re-open the same file again */
+    stream = test2fopen(req->testno);
+    if(!stream) {
+      error = errno;
+      logmsg("fopen() failed with error: %d %s", error, strerror(error));
+      logmsg("Couldn't open test file");
+      free(ptr);
+      return 0;
+    }
+    else {
+      /* get the custom server control "commands" */
+      error = getpart(&cmd, &cmdsize, "reply", "postcmd", stream);
+      fclose(stream);
+      if(error) {
+        logmsg("getpart() failed with error: %d", error);
+        free(ptr);
+        return 0;
+      }
+    }
+  }
+
+  if(got_exit_signal) {
+    free(ptr);
+    free(cmd);
+    return -1;
+  }
+
+  /* If the word 'swsclose' is present anywhere in the reply chunk, the
+     connection will be closed after the data has been sent to the requesting
+     client... */
+  if(strstr(buffer, "swsclose") || !count) {
+    persistent = FALSE;
+    logmsg("connection close instruction \"swsclose\" found in response");
+  }
+  if(strstr(buffer, "swsbounce")) {
+    prevbounce = TRUE;
+    logmsg("enable \"swsbounce\" in the next request");
+  }
+  else
+    prevbounce = FALSE;
+
+  dump = fopen(RESPONSE_DUMP, "ab");
+  if(!dump) {
+    error = errno;
+    logmsg("fopen() failed with error: %d %s", error, strerror(error));
+    logmsg("Error opening file: %s", RESPONSE_DUMP);
+    logmsg("couldn't create logfile: " RESPONSE_DUMP);
+    free(ptr);
+    free(cmd);
+    return -1;
+  }
+
+  responsesize = count;
+  do {
+    /* Ok, we send no more than 200 bytes at a time, just to make sure that
+       larger chunks are split up so that the client will need to do multiple
+       recv() calls to get it and thus we exercise that code better */
+    size_t num = count;
+    if(num > 200)
+      num = 200;
+    written = swrite(sock, buffer, num);
+    if(written < 0) {
+      sendfailure = TRUE;
+      break;
+    }
+    else {
+      logmsg("Sent off %zd bytes", written);
+    }
+    /* write to file as well */
+    fwrite(buffer, 1, (size_t)written, dump);
+    if(got_exit_signal)
+      break;
+
+    count -= written;
+    buffer += written;
+  } while(count>0);
+
+  /* Send out any RTP data */
+  if(req->rtp_buffer) {
+    logmsg("About to write %zu RTP bytes", req->rtp_buffersize);
+    count = req->rtp_buffersize;
+    do {
+      size_t num = count;
+      if(num > 200)
+        num = 200;
+      written = swrite(sock, req->rtp_buffer + (req->rtp_buffersize - count),
+                       num);
+      if(written < 0) {
+        sendfailure = TRUE;
+        break;
+      }
+      count -= written;
+    } while(count > 0);
+
+    free(req->rtp_buffer);
+    req->rtp_buffersize = 0;
+  }
+
+  do {
+    res = fclose(dump);
+  } while(res && ((error = errno) == EINTR));
+  if(res)
+    logmsg("Error closing file %s error: %d %s",
+           RESPONSE_DUMP, error, strerror(error));
+
+  if(got_exit_signal) {
+    free(ptr);
+    free(cmd);
+    return -1;
+  }
+
+  if(sendfailure) {
+    logmsg("Sending response failed. Only (%zu bytes) of "
+           "(%zu bytes) were sent",
+           responsesize-count, responsesize);
+    free(ptr);
+    free(cmd);
+    return -1;
+  }
+
+  logmsg("Response sent (%zu bytes) and written to " RESPONSE_DUMP,
+         responsesize);
+  free(ptr);
+
+  if(cmdsize > 0) {
+    char command[32];
+    int quarters;
+    int num;
+    ptr = cmd;
+    do {
+      if(2 == sscanf(ptr, "%31s %d", command, &num)) {
+        if(!strcmp("wait", command)) {
+          logmsg("Told to sleep for %d seconds", num);
+          quarters = num * 4;
+          while(quarters > 0) {
+            quarters--;
+            res = wait_ms(250);
+            if(got_exit_signal)
+              break;
+            if(res) {
+              /* should not happen */
+              error = errno;
+              logmsg("wait_ms() failed with error: (%d) %s",
+                     error, strerror(error));
+              break;
+            }
+          }
+          if(!quarters)
+            logmsg("Continuing after sleeping %d seconds", num);
+        }
+        else
+          logmsg("Unknown command in reply command section");
+      }
+      ptr = strchr(ptr, '\n');
+      if(ptr)
+        ptr++;
+      else
+        ptr = NULL;
+    } while(ptr && *ptr);
+  }
+  free(cmd);
+  req->open = persistent;
+
+  prevtestno = req->testno;
+  prevpartno = req->partno;
+
+  return 0;
+}
+
+
+int main(int argc, char *argv[])
+{
+  srvr_sockaddr_union_t me;
+  curl_socket_t sock = CURL_SOCKET_BAD;
+  curl_socket_t msgsock = CURL_SOCKET_BAD;
+  int wrotepidfile = 0;
+  int wroteportfile = 0;
+  int flag;
+  unsigned short port = DEFAULT_PORT;
+  const char *pidname = ".rtsp.pid";
+  const char *portname = NULL; /* none by default */
+  struct httprequest req;
+  int rc;
+  int error;
+  int arg = 1;
+
+  memset(&req, 0, sizeof(req));
+
+  while(argc>arg) {
+    if(!strcmp("--version", argv[arg])) {
+      printf("rtspd IPv4%s"
+             "\n"
+             ,
+#ifdef ENABLE_IPV6
+             "/IPv6"
+#else
+             ""
+#endif
+             );
+      return 0;
+    }
+    else if(!strcmp("--pidfile", argv[arg])) {
+      arg++;
+      if(argc>arg)
+        pidname = argv[arg++];
+    }
+    else if(!strcmp("--portfile", argv[arg])) {
+      arg++;
+      if(argc>arg)
+        portname = argv[arg++];
+    }
+    else if(!strcmp("--logfile", argv[arg])) {
+      arg++;
+      if(argc>arg)
+        serverlogfile = argv[arg++];
+    }
+    else if(!strcmp("--ipv4", argv[arg])) {
+#ifdef ENABLE_IPV6
+      ipv_inuse = "IPv4";
+      use_ipv6 = FALSE;
+#endif
+      arg++;
+    }
+    else if(!strcmp("--ipv6", argv[arg])) {
+#ifdef ENABLE_IPV6
+      ipv_inuse = "IPv6";
+      use_ipv6 = TRUE;
+#endif
+      arg++;
+    }
+    else if(!strcmp("--port", argv[arg])) {
+      arg++;
+      if(argc>arg) {
+        char *endptr;
+        unsigned long ulnum = strtoul(argv[arg], &endptr, 10);
+        port = curlx_ultous(ulnum);
+        arg++;
+      }
+    }
+    else if(!strcmp("--srcdir", argv[arg])) {
+      arg++;
+      if(argc>arg) {
+        path = argv[arg];
+        arg++;
+      }
+    }
+    else {
+      puts("Usage: rtspd [option]\n"
+           " --version\n"
+           " --logfile [file]\n"
+           " --pidfile [file]\n"
+           " --portfile [file]\n"
+           " --ipv4\n"
+           " --ipv6\n"
+           " --port [port]\n"
+           " --srcdir [path]");
+      return 0;
+    }
+  }
+
+#ifdef WIN32
+  win32_init();
+  atexit(win32_cleanup);
+#endif
+
+  install_signal_handlers(false);
+
+#ifdef ENABLE_IPV6
+  if(!use_ipv6)
+#endif
+    sock = socket(AF_INET, SOCK_STREAM, 0);
+#ifdef ENABLE_IPV6
+  else
+    sock = socket(AF_INET6, SOCK_STREAM, 0);
+#endif
+
+  if(CURL_SOCKET_BAD == sock) {
+    error = SOCKERRNO;
+    logmsg("Error creating socket: (%d) %s",
+           error, strerror(error));
+    goto server_cleanup;
+  }
+
+  flag = 1;
+  if(0 != setsockopt(sock, SOL_SOCKET, SO_REUSEADDR,
+            (void *)&flag, sizeof(flag))) {
+    error = SOCKERRNO;
+    logmsg("setsockopt(SO_REUSEADDR) failed with error: (%d) %s",
+           error, strerror(error));
+    goto server_cleanup;
+  }
+
+#ifdef ENABLE_IPV6
+  if(!use_ipv6) {
+#endif
+    memset(&me.sa4, 0, sizeof(me.sa4));
+    me.sa4.sin_family = AF_INET;
+    me.sa4.sin_addr.s_addr = INADDR_ANY;
+    me.sa4.sin_port = htons(port);
+    rc = bind(sock, &me.sa, sizeof(me.sa4));
+#ifdef ENABLE_IPV6
+  }
+  else {
+    memset(&me.sa6, 0, sizeof(me.sa6));
+    me.sa6.sin6_family = AF_INET6;
+    me.sa6.sin6_addr = in6addr_any;
+    me.sa6.sin6_port = htons(port);
+    rc = bind(sock, &me.sa, sizeof(me.sa6));
+  }
+#endif /* ENABLE_IPV6 */
+  if(0 != rc) {
+    error = SOCKERRNO;
+    logmsg("Error binding socket on port %hu: (%d) %s",
+           port, error, strerror(error));
+    goto server_cleanup;
+  }
+
+  if(!port) {
+    /* The system was supposed to choose a port number, figure out which
+       port we actually got and update the listener port value with it. */
+    curl_socklen_t la_size;
+    srvr_sockaddr_union_t localaddr;
+#ifdef ENABLE_IPV6
+    if(!use_ipv6)
+#endif
+      la_size = sizeof(localaddr.sa4);
+#ifdef ENABLE_IPV6
+    else
+      la_size = sizeof(localaddr.sa6);
+#endif
+    memset(&localaddr.sa, 0, (size_t)la_size);
+    if(getsockname(sock, &localaddr.sa, &la_size) < 0) {
+      error = SOCKERRNO;
+      logmsg("getsockname() failed with error: (%d) %s",
+             error, strerror(error));
+      sclose(sock);
+      goto server_cleanup;
+    }
+    switch(localaddr.sa.sa_family) {
+    case AF_INET:
+      port = ntohs(localaddr.sa4.sin_port);
+      break;
+#ifdef ENABLE_IPV6
+    case AF_INET6:
+      port = ntohs(localaddr.sa6.sin6_port);
+      break;
+#endif
+    default:
+      break;
+    }
+    if(!port) {
+      /* Real failure, listener port shall not be zero beyond this point. */
+      logmsg("Apparently getsockname() succeeded, with listener port zero.");
+      logmsg("A valid reason for this failure is a binary built without");
+      logmsg("proper network library linkage. This might not be the only");
+      logmsg("reason, but double check it before anything else.");
+      sclose(sock);
+      goto server_cleanup;
+    }
+  }
+  logmsg("Running %s version on port %d", ipv_inuse, (int)port);
+
+  /* start accepting connections */
+  rc = listen(sock, 5);
+  if(0 != rc) {
+    error = SOCKERRNO;
+    logmsg("listen() failed with error: (%d) %s",
+           error, strerror(error));
+    goto server_cleanup;
+  }
+
+  /*
+  ** As soon as this server writes its pid file the test harness will
+  ** attempt to connect to this server and initiate its verification.
+  */
+
+  wrotepidfile = write_pidfile(pidname);
+  if(!wrotepidfile)
+    goto server_cleanup;
+
+  if(portname) {
+    wroteportfile = write_portfile(portname, port);
+    if(!wroteportfile)
+      goto server_cleanup;
+  }
+
+  for(;;) {
+    msgsock = accept(sock, NULL, NULL);
+
+    if(got_exit_signal)
+      break;
+    if(CURL_SOCKET_BAD == msgsock) {
+      error = SOCKERRNO;
+      logmsg("MAJOR ERROR: accept() failed with error: (%d) %s",
+             error, strerror(error));
+      break;
+    }
+
+    /*
+    ** As soon as this server acepts a connection from the test harness it
+    ** must set the server logs advisor read lock to indicate that server
+    ** logs should not be read until this lock is removed by this server.
+    */
+
+    set_advisor_read_lock(SERVERLOGS_LOCK);
+    serverlogslocked = 1;
+
+    logmsg("====> Client connect");
+
+#ifdef TCP_NODELAY
+    /*
+     * Disable the Nagle algorithm to make it easier to send out a large
+     * response in many small segments to torture the clients more.
+     */
+    flag = 1;
+    if(setsockopt(msgsock, IPPROTO_TCP, TCP_NODELAY,
+                   (void *)&flag, sizeof(flag)) == -1) {
+      logmsg("====> TCP_NODELAY failed");
+    }
+#endif
+
+    /* initialization of httprequest struct is done in get_request(), but due
+       to pipelining treatment the pipelining struct field must be initialized
+       previously to FALSE every time a new connection arrives. */
+
+    req.pipelining = FALSE;
+
+    do {
+      if(got_exit_signal)
+        break;
+
+      if(get_request(msgsock, &req))
+        /* non-zero means error, break out of loop */
+        break;
+
+      if(prevbounce) {
+        /* bounce treatment requested */
+        if((req.testno == prevtestno) &&
+           (req.partno == prevpartno)) {
+          req.partno++;
+          logmsg("BOUNCE part number to %ld", req.partno);
+        }
+        else {
+          prevbounce = FALSE;
+          prevtestno = -1;
+          prevpartno = -1;
+        }
+      }
+
+      send_doc(msgsock, &req);
+      if(got_exit_signal)
+        break;
+
+      if((req.testno < 0) && (req.testno != DOCNUMBER_CONNECT)) {
+        logmsg("special request received, no persistency");
+        break;
+      }
+      if(!req.open) {
+        logmsg("instructed to close connection after server-reply");
+        break;
+      }
+
+      if(req.open)
+        logmsg("=> persistent connection request ended, awaits new request");
+      /* if we got a CONNECT, loop and get another request as well! */
+    } while(req.open || (req.testno == DOCNUMBER_CONNECT));
+
+    if(got_exit_signal)
+      break;
+
+    logmsg("====> Client disconnect");
+    sclose(msgsock);
+    msgsock = CURL_SOCKET_BAD;
+
+    if(serverlogslocked) {
+      serverlogslocked = 0;
+      clear_advisor_read_lock(SERVERLOGS_LOCK);
+    }
+
+    if(req.testno == DOCNUMBER_QUIT)
+      break;
+  }
+
+server_cleanup:
+
+  if((msgsock != sock) && (msgsock != CURL_SOCKET_BAD))
+    sclose(msgsock);
+
+  if(sock != CURL_SOCKET_BAD)
+    sclose(sock);
+
+  if(got_exit_signal)
+    logmsg("signalled to die");
+
+  if(wrotepidfile)
+    unlink(pidname);
+  if(wroteportfile)
+    unlink(portname);
+
+  if(serverlogslocked) {
+    serverlogslocked = 0;
+    clear_advisor_read_lock(SERVERLOGS_LOCK);
+  }
+
+  restore_signal_handlers(false);
+
+  if(got_exit_signal) {
+    logmsg("========> %s rtspd (port: %d pid: %ld) exits with signal (%d)",
+           ipv_inuse, (int)port, (long)getpid(), exit_signal);
+    /*
+     * To properly set the return status of the process we
+     * must raise the same signal SIGINT or SIGTERM that we
+     * caught and let the old handler take care of it.
+     */
+    raise(exit_signal);
+  }
+
+  logmsg("========> rtspd quits");
+  return 0;
+}