| /* | 
 |  * gpiolib support for Wolfson WM831x PMICs | 
 |  * | 
 |  * Copyright 2009 Wolfson Microelectronics PLC. | 
 |  * | 
 |  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> | 
 |  * | 
 |  *  This program is free software; you can redistribute  it and/or modify it | 
 |  *  under  the terms of  the GNU General  Public License as published by the | 
 |  *  Free Software Foundation;  either version 2 of the  License, or (at your | 
 |  *  option) any later version. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/module.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/mfd/core.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/seq_file.h> | 
 |  | 
 | #include <linux/mfd/wm831x/core.h> | 
 | #include <linux/mfd/wm831x/pdata.h> | 
 | #include <linux/mfd/wm831x/gpio.h> | 
 | #include <linux/mfd/wm831x/irq.h> | 
 |  | 
 | struct wm831x_gpio { | 
 | 	struct wm831x *wm831x; | 
 | 	struct gpio_chip gpio_chip; | 
 | }; | 
 |  | 
 | static inline struct wm831x_gpio *to_wm831x_gpio(struct gpio_chip *chip) | 
 | { | 
 | 	return container_of(chip, struct wm831x_gpio, gpio_chip); | 
 | } | 
 |  | 
 | static int wm831x_gpio_direction_in(struct gpio_chip *chip, unsigned offset) | 
 | { | 
 | 	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); | 
 | 	struct wm831x *wm831x = wm831x_gpio->wm831x; | 
 | 	int val = WM831X_GPN_DIR; | 
 |  | 
 | 	if (wm831x->has_gpio_ena) | 
 | 		val |= WM831X_GPN_TRI; | 
 |  | 
 | 	return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset, | 
 | 			       WM831X_GPN_DIR | WM831X_GPN_TRI | | 
 | 			       WM831X_GPN_FN_MASK, val); | 
 | } | 
 |  | 
 | static int wm831x_gpio_get(struct gpio_chip *chip, unsigned offset) | 
 | { | 
 | 	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); | 
 | 	struct wm831x *wm831x = wm831x_gpio->wm831x; | 
 | 	int ret; | 
 |  | 
 | 	ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	if (ret & 1 << offset) | 
 | 		return 1; | 
 | 	else | 
 | 		return 0; | 
 | } | 
 |  | 
 | static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value) | 
 | { | 
 | 	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); | 
 | 	struct wm831x *wm831x = wm831x_gpio->wm831x; | 
 |  | 
 | 	wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, 1 << offset, | 
 | 			value << offset); | 
 | } | 
 |  | 
 | static int wm831x_gpio_direction_out(struct gpio_chip *chip, | 
 | 				     unsigned offset, int value) | 
 | { | 
 | 	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); | 
 | 	struct wm831x *wm831x = wm831x_gpio->wm831x; | 
 | 	int val = 0; | 
 | 	int ret; | 
 |  | 
 | 	if (wm831x->has_gpio_ena) | 
 | 		val |= WM831X_GPN_TRI; | 
 |  | 
 | 	ret = wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset, | 
 | 			      WM831X_GPN_DIR | WM831X_GPN_TRI | | 
 | 			      WM831X_GPN_FN_MASK, val); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	/* Can only set GPIO state once it's in output mode */ | 
 | 	wm831x_gpio_set(chip, offset, value); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int wm831x_gpio_to_irq(struct gpio_chip *chip, unsigned offset) | 
 | { | 
 | 	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); | 
 | 	struct wm831x *wm831x = wm831x_gpio->wm831x; | 
 |  | 
 | 	if (!wm831x->irq_base) | 
 | 		return -EINVAL; | 
 |  | 
 | 	return wm831x->irq_base + WM831X_IRQ_GPIO_1 + offset; | 
 | } | 
 |  | 
 | static int wm831x_gpio_set_debounce(struct gpio_chip *chip, unsigned offset, | 
 | 				    unsigned debounce) | 
 | { | 
 | 	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); | 
 | 	struct wm831x *wm831x = wm831x_gpio->wm831x; | 
 | 	int reg = WM831X_GPIO1_CONTROL + offset; | 
 | 	int ret, fn; | 
 |  | 
 | 	ret = wm831x_reg_read(wm831x, reg); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	switch (ret & WM831X_GPN_FN_MASK) { | 
 | 	case 0: | 
 | 	case 1: | 
 | 		break; | 
 | 	default: | 
 | 		/* Not in GPIO mode */ | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	if (debounce >= 32 && debounce <= 64) | 
 | 		fn = 0; | 
 | 	else if (debounce >= 4000 && debounce <= 8000) | 
 | 		fn = 1; | 
 | 	else | 
 | 		return -EINVAL; | 
 |  | 
 | 	return wm831x_set_bits(wm831x, reg, WM831X_GPN_FN_MASK, fn); | 
 | } | 
 |  | 
 | #ifdef CONFIG_DEBUG_FS | 
 | static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) | 
 | { | 
 | 	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); | 
 | 	struct wm831x *wm831x = wm831x_gpio->wm831x; | 
 | 	int i, tristated; | 
 |  | 
 | 	for (i = 0; i < chip->ngpio; i++) { | 
 | 		int gpio = i + chip->base; | 
 | 		int reg; | 
 | 		const char *label, *pull, *powerdomain; | 
 |  | 
 | 		/* We report the GPIO even if it's not requested since | 
 | 		 * we're also reporting things like alternate | 
 | 		 * functions which apply even when the GPIO is not in | 
 | 		 * use as a GPIO. | 
 | 		 */ | 
 | 		label = gpiochip_is_requested(chip, i); | 
 | 		if (!label) | 
 | 			label = "Unrequested"; | 
 |  | 
 | 		seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label); | 
 |  | 
 | 		reg = wm831x_reg_read(wm831x, WM831X_GPIO1_CONTROL + i); | 
 | 		if (reg < 0) { | 
 | 			dev_err(wm831x->dev, | 
 | 				"GPIO control %d read failed: %d\n", | 
 | 				gpio, reg); | 
 | 			seq_printf(s, "\n"); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		switch (reg & WM831X_GPN_PULL_MASK) { | 
 | 		case WM831X_GPIO_PULL_NONE: | 
 | 			pull = "nopull"; | 
 | 			break; | 
 | 		case WM831X_GPIO_PULL_DOWN: | 
 | 			pull = "pulldown"; | 
 | 			break; | 
 | 		case WM831X_GPIO_PULL_UP: | 
 | 			pull = "pullup"; | 
 | 			break; | 
 | 		default: | 
 | 			pull = "INVALID PULL"; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		switch (i + 1) { | 
 | 		case 1 ... 3: | 
 | 		case 7 ... 9: | 
 | 			if (reg & WM831X_GPN_PWR_DOM) | 
 | 				powerdomain = "VPMIC"; | 
 | 			else | 
 | 				powerdomain = "DBVDD"; | 
 | 			break; | 
 |  | 
 | 		case 4 ... 6: | 
 | 		case 10 ... 12: | 
 | 			if (reg & WM831X_GPN_PWR_DOM) | 
 | 				powerdomain = "SYSVDD"; | 
 | 			else | 
 | 				powerdomain = "DBVDD"; | 
 | 			break; | 
 |  | 
 | 		case 13 ... 16: | 
 | 			powerdomain = "TPVDD"; | 
 | 			break; | 
 |  | 
 | 		default: | 
 | 			BUG(); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		tristated = reg & WM831X_GPN_TRI; | 
 | 		if (wm831x->has_gpio_ena) | 
 | 			tristated = !tristated; | 
 |  | 
 | 		seq_printf(s, " %s %s %s %s%s\n" | 
 | 			   "                                  %s%s (0x%4x)\n", | 
 | 			   reg & WM831X_GPN_DIR ? "in" : "out", | 
 | 			   wm831x_gpio_get(chip, i) ? "high" : "low", | 
 | 			   pull, | 
 | 			   powerdomain, | 
 | 			   reg & WM831X_GPN_POL ? "" : " inverted", | 
 | 			   reg & WM831X_GPN_OD ? "open-drain" : "CMOS", | 
 | 			   tristated ? " tristated" : "", | 
 | 			   reg); | 
 | 	} | 
 | } | 
 | #else | 
 | #define wm831x_gpio_dbg_show NULL | 
 | #endif | 
 |  | 
 | static struct gpio_chip template_chip = { | 
 | 	.label			= "wm831x", | 
 | 	.owner			= THIS_MODULE, | 
 | 	.direction_input	= wm831x_gpio_direction_in, | 
 | 	.get			= wm831x_gpio_get, | 
 | 	.direction_output	= wm831x_gpio_direction_out, | 
 | 	.set			= wm831x_gpio_set, | 
 | 	.to_irq			= wm831x_gpio_to_irq, | 
 | 	.set_debounce		= wm831x_gpio_set_debounce, | 
 | 	.dbg_show		= wm831x_gpio_dbg_show, | 
 | 	.can_sleep		= 1, | 
 | }; | 
 |  | 
 | static int __devinit wm831x_gpio_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); | 
 | 	struct wm831x_pdata *pdata = wm831x->dev->platform_data; | 
 | 	struct wm831x_gpio *wm831x_gpio; | 
 | 	int ret; | 
 |  | 
 | 	wm831x_gpio = kzalloc(sizeof(*wm831x_gpio), GFP_KERNEL); | 
 | 	if (wm831x_gpio == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	wm831x_gpio->wm831x = wm831x; | 
 | 	wm831x_gpio->gpio_chip = template_chip; | 
 | 	wm831x_gpio->gpio_chip.ngpio = wm831x->num_gpio; | 
 | 	wm831x_gpio->gpio_chip.dev = &pdev->dev; | 
 | 	if (pdata && pdata->gpio_base) | 
 | 		wm831x_gpio->gpio_chip.base = pdata->gpio_base; | 
 | 	else | 
 | 		wm831x_gpio->gpio_chip.base = -1; | 
 |  | 
 | 	ret = gpiochip_add(&wm831x_gpio->gpio_chip); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", | 
 | 			ret); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	platform_set_drvdata(pdev, wm831x_gpio); | 
 |  | 
 | 	return ret; | 
 |  | 
 | err: | 
 | 	kfree(wm831x_gpio); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int __devexit wm831x_gpio_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct wm831x_gpio *wm831x_gpio = platform_get_drvdata(pdev); | 
 | 	int ret; | 
 |  | 
 | 	ret = gpiochip_remove(&wm831x_gpio->gpio_chip); | 
 | 	if (ret == 0) | 
 | 		kfree(wm831x_gpio); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static struct platform_driver wm831x_gpio_driver = { | 
 | 	.driver.name	= "wm831x-gpio", | 
 | 	.driver.owner	= THIS_MODULE, | 
 | 	.probe		= wm831x_gpio_probe, | 
 | 	.remove		= __devexit_p(wm831x_gpio_remove), | 
 | }; | 
 |  | 
 | static int __init wm831x_gpio_init(void) | 
 | { | 
 | 	return platform_driver_register(&wm831x_gpio_driver); | 
 | } | 
 | subsys_initcall(wm831x_gpio_init); | 
 |  | 
 | static void __exit wm831x_gpio_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&wm831x_gpio_driver); | 
 | } | 
 | module_exit(wm831x_gpio_exit); | 
 |  | 
 | MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | 
 | MODULE_DESCRIPTION("GPIO interface for WM831x PMICs"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS("platform:wm831x-gpio"); |