Merge "[Feature][ZXW-100]optimize powerkey times during the DL phase"
diff --git a/ap/app/zte_comm/at_ctl/src/atconfig/ps_normal.c b/ap/app/zte_comm/at_ctl/src/atconfig/ps_normal.c
index 2d4c6b1..03d43eb 100755
--- a/ap/app/zte_comm/at_ctl/src/atconfig/ps_normal.c
+++ b/ap/app/zte_comm/at_ctl/src/atconfig/ps_normal.c
@@ -115,6 +115,14 @@
void *p[5] = {&timeinfo.time_zone,&timeinfo.sav_time,temp1,temp2,timeinfo.univer_time};
int time_zone = 0;
+ //>>>sj.zhang add @2023-08-10 for systime NITZ sync enable/disenable.
+ if(0 != system("uci get lynq_uci.lynq_sync_time.lynq_modem_sync_time_enable | grep -E \'^1$\'"))
+ {
+ at_print(AT_ERR,"zmmi_auto_act: nitz disenabled. \n");
+ return AT_END;
+ }
+ //>>>sj.zhang add @2023-08-10 end.
+
sc_cfg_get("sntp_time_set_mode", mode, sizeof(mode));
if(strcmp(mode, "manual") == 0)
{
diff --git a/cap/zx297520v3/sources/meta-zxic-custom/conf/distro/vehicle_dc.conf b/cap/zx297520v3/sources/meta-zxic-custom/conf/distro/vehicle_dc.conf
index 5de1db2..d5acc77 100755
--- a/cap/zx297520v3/sources/meta-zxic-custom/conf/distro/vehicle_dc.conf
+++ b/cap/zx297520v3/sources/meta-zxic-custom/conf/distro/vehicle_dc.conf
@@ -163,6 +163,7 @@
liblynq-qser-network \
liblynq-qser-gnss \
liblynq-qser-fota \
+ liblynq-systime \
"
zxic_lib += "${@bb.utils.contains('CONFIG_TEL_API_SUPPORT', 'RIL', 'libril libreference-ril', 'libtelsvr', d)}"
@@ -231,6 +232,7 @@
lynq-qser-fota-demo \
lynq-qser-gnss-demo \
lynq-qser-network-demo \
+ lynq-systime-demo \
"
zxic_app_open += "${@bb.utils.contains('CONFIG_TEL_API_SUPPORT', 'RIL', 'rild', '', d)}"
diff --git a/cap/zx297520v3/sources/meta-zxic-custom/conf/distro/vehicle_dc_ref.conf b/cap/zx297520v3/sources/meta-zxic-custom/conf/distro/vehicle_dc_ref.conf
index e1ad73d..23bac63 100755
--- a/cap/zx297520v3/sources/meta-zxic-custom/conf/distro/vehicle_dc_ref.conf
+++ b/cap/zx297520v3/sources/meta-zxic-custom/conf/distro/vehicle_dc_ref.conf
@@ -191,6 +191,8 @@
liblynq-qser-network \
liblynq-qser-gnss \
liblynq-qser-fota \
+ libpoweralarm \
+ liblynq-systime \
"
zxic_lib += "${@bb.utils.contains('CONFIG_TEL_API_SUPPORT', 'RIL', 'libril', 'libtelsvr', d)}"
@@ -258,7 +260,9 @@
lynq-qser-fota-demo \
lynq-qser-gnss-demo \
lynq-qser-network-demo \
- "
+ poweralarm-demo \
+ lynq-systime-demo \
+ "
zxic_app_open += "${@bb.utils.contains('CONFIG_TEL_API_SUPPORT', 'RIL', 'rild', '', d)}"
zxic_app_open += "${@bb.utils.contains('CONFIG_TEL_API_SUPPORT', 'BL', 'tel-svr', '', d)}"
diff --git a/cap/zx297520v3/sources/meta-zxic-custom/recipes-lynq/liblynq-systime/liblynq-systime.bb b/cap/zx297520v3/sources/meta-zxic-custom/recipes-lynq/liblynq-systime/liblynq-systime.bb
new file mode 100644
index 0000000..da64aad
--- /dev/null
+++ b/cap/zx297520v3/sources/meta-zxic-custom/recipes-lynq/liblynq-systime/liblynq-systime.bb
@@ -0,0 +1,64 @@
+#inherit externalsrc package
+
+DESCRIPTION = "liblynq-systime"
+LICENSE = "CLOSED"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=b1e07e8d88e26263e71d3a9e2aa9a2ff"
+DEPENDS += "${@bb.utils.contains('TARGET_PLATFORM', 'T106', "libsctel", '', d)} liblynq-uci liblynq-log"
+#inherit workonsrc
+WORKONSRC = "${TOPDIR}/../src/lynq/lib/liblynq-systime/"
+FILESEXTRAPATHS_prepend :="${TOPDIR}/../src/lynq/lib/:"
+SRC_URI = " \
+ file://liblynq-systime \
+ "
+
+SRC-DIR = "${S}/../liblynq-systime"
+
+TARGET_CC_ARCH += "${LDFLAGS}"
+BB_INCLUDE_ADD = "--sysroot=${STAGING_DIR_HOST}"
+BB_LDFLAGS_ADD = "--sysroot=${STAGING_DIR_HOST} -Wl,--hash-style=gnu"
+#Parameters passed to do_compile()
+EXTRA_OEMAKE = "'TARGET_PLATFORM = ${TARGET_PLATFORM}'"
+
+FILES_${PN} = "${base_libdir}/*.so \
+ ${base_bindir}\
+ ${base_sbindir} \
+ /etc/dbus-1/system.d/"
+FILES_${PN}-dev = "/test \
+ ${includedir}"
+
+FILES_${PN}-doc = "/doc"
+
+FILES_${PN}-dbg ="${base_bindir}/.debug \
+ ${base_libdir}/.debug \
+ ${base_sbindir}/.debug"
+
+INSANE_SKIP_${PN} += "already-stripped"
+INSANE_SKIP_${PN} += "installed-vs-shipped"
+
+
+#INHIBIT_PACKAGE_STRIP = "1"
+do_compile () {
+ if [ "${PACKAGE_ARCH}" = "cortexa7hf-vfp-vfpv4-neon" ]; then
+ oe_runmake all -C ${SRC-DIR} ROOT=${STAGING_DIR_HOST} OFLAGS="--sysroot=${STAGING_DIR_HOST} -Os -mfpu=neon-vfpv4 -mhard-float -Wl,--hash-style=gnu"
+ elif [ "${PACKAGE_ARCH}" = "cortexa7hf-neon-vfpv4" ]; then
+ oe_runmake all -C ${SRC-DIR} ROOT=${STAGING_DIR_HOST} OFLAGS="--sysroot=${STAGING_DIR_HOST} -Os -mfpu=neon-vfpv4 -mhard-float -Wl,--hash-style=gnu"
+ elif [ "${PACKAGE_ARCH}" = "cortexa53hf-neon-fp-armv8" ]; then
+ oe_runmake all -C ${SRC-DIR} ROOT=${STAGING_DIR_HOST} OFLAGS="--sysroot=${STAGING_DIR_HOST} -Os -mfpu=neon-vfpv4 -mhard-float -Wl,--hash-style=gnu -mhard-float -mfpu=neon-fp-armv8 -mfloat-abi=hard -mcpu=cortex-a53 -mtune=cortex-a53"
+ else
+ oe_runmake all -C ${SRC-DIR} ROOT=${STAGING_DIR_HOST} OFLAGS="--sysroot=${STAGING_DIR_HOST} -Os -Wl,--hash-style=gnu"
+ fi
+}
+
+do_install () {
+ oe_runmake install -C ${SRC-DIR} ROOT=${D}
+
+ if [ -d "${WORKONSRC}" ] ; then
+ install -d ${D}${includedir}/
+ cp -af ${SRC-DIR}/include/ ${D}${includedir}/
+ fi
+}
+
+addtask bachclean
+do_bachclean () {
+ oe_runmake clean
+}
diff --git a/cap/zx297520v3/sources/meta-zxic-custom/recipes-lynq/libpoweralarm/libpoweralarm.bb b/cap/zx297520v3/sources/meta-zxic-custom/recipes-lynq/libpoweralarm/libpoweralarm.bb
new file mode 100755
index 0000000..0867686
--- /dev/null
+++ b/cap/zx297520v3/sources/meta-zxic-custom/recipes-lynq/libpoweralarm/libpoweralarm.bb
@@ -0,0 +1,58 @@
+#inherit externalsrc package
+DESCRIPTION = "libpoweralarm.so "
+SECTION = "base"
+#LICENSE = "Mobiletek""
+LICENSE = "CLOSED"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=d759532d295a4ec07250edf931caef80"
+DEPENDS += "bootchart liblynq-log libsctel "
+
+#inherit workonsrc
+WORKONSRC = "${TOPDIR}/../src/lynq/lib/libpoweralarm/"
+
+FILESEXTRAPATHS_prepend :="${TOPDIR}/../src/lynq/lib/:"
+SRC_URI = " \
+ file://libpoweralarm \
+ "
+SRC-DIR = "${S}/../libpoweralarm"
+TARGET_CC_ARCH += "${LDFLAGS}"
+BB_INCLUDE_ADD = "--sysroot=${STAGING_DIR_HOST}"
+BB_LDFLAGS_ADD = "--sysroot=${STAGING_DIR_HOST} -Wl,--hash-style=gnu"
+
+#Parameters passed to do_compile()
+
+FILES_${PN} = "${base_libdir}/*.so \
+ ${base_bindir}\
+ ${base_sbindir}"
+
+
+FILES_${PN}-dev = "/test \
+ ${includedir}"
+
+FILES_${PN}-doc = "/doc"
+
+FILES_${PN}-dbg ="${base_bindir}/.debug \
+ ${base_libdir}/.debug \
+ ${base_sbindir}/.debug"
+
+INSANE_SKIP_${PN} += "already-stripped"
+INSANE_SKIP_${PN} += "installed-vs-shipped"
+
+
+#INHIBIT_PACKAGE_STRIP = "1"
+do_compile () {
+ oe_runmake all -C ${SRC-DIR} ROOT=${STAGING_DIR_HOST} OFLAGS="--sysroot=${STAGING_DIR_HOST} -Os -Wl,--hash-style=gnu -DTELEPHONYWARE"
+}
+
+do_install () {
+ oe_runmake install -C ${SRC-DIR} ROOT=${D}
+
+ if [ -d "${WORKONSRC}" ] ; then
+ install -d ${D}${includedir}/
+ cp -af ${SRC-DIR}/include/ ${D}${includedir}/
+ fi
+}
+
+addtask bachclean
+do_bachclean () {
+ oe_runmake clean
+}
diff --git a/cap/zx297520v3/sources/meta-zxic-custom/recipes-lynq/lynq-systime-demo/lynq-systime-demo.bb b/cap/zx297520v3/sources/meta-zxic-custom/recipes-lynq/lynq-systime-demo/lynq-systime-demo.bb
new file mode 100644
index 0000000..ca07a8a
--- /dev/null
+++ b/cap/zx297520v3/sources/meta-zxic-custom/recipes-lynq/lynq-systime-demo/lynq-systime-demo.bb
@@ -0,0 +1,36 @@
+#inherit externalsrc package
+#inherit externalsrc package systemd
+DESCRIPTION = "lynq-systime-demo"
+LICENSE = "CLOSED"
+LICENSE = "CLOSED"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=b1e07e8d88e26263e71d3a9e2aa9a2ff"
+DEPENDS += "liblynq-systime"
+#inherit workonsrc
+WORKONSRC = "${TOPDIR}/../src/lynq/packages/apps/lynq-systime-demo"
+FILESEXTRAPATHS_prepend :="${TOPDIR}/../src/lynq/packages/apps:"
+SRC_URI = " \
+ file://lynq-systime-demo \
+ "
+
+SRC-DIR = "${S}/../lynq-systime-demo"
+TARGET_CC_ARCH += "${LDFLAGS}"
+SYSTEMD_PACKAGES = "${PN}"
+#Parameters passed to do_compile()
+EXTRA_OEMAKE = "'TARGET_PLATFORM = ${TARGET_PLATFORM}'\"
+EXTRA_OEMAKE += "'MOBILETEK_RIL_CFG = ${MOBILETEK_RIL_CFG}'"
+
+EXTRA_OEMAKE += "'MOBILETEK_FOTA_CFG = ${MOBILETEK_FOTA_CFG}'"
+
+#INHIBIT_PACKAGE_STRIP = "1"
+do_compile () {
+ if test "${PACKAGE_ARCH}" = "cortexa7hf-vfp-vfpv4-neon" || test "${PACKAGE_ARCH}" = "cortexa7hf-neon-vfpv4"; then
+ oe_runmake all -C ${SRC-DIR} ROOT=${STAGING_DIR_HOST} OFLAGS="--sysroot=${STAGING_DIR_HOST} -mhard-float"
+ else
+ oe_runmake all -C ${SRC-DIR} ROOT=${STAGING_DIR_HOST} OFLAGS="--sysroot=${STAGING_DIR_HOST}"
+ fi
+}
+
+do_install() {
+ install -d ${D}${bindir}/
+ install -m 0755 ${SRC-DIR}/lynq-systime-demo ${D}${bindir}/
+}
diff --git a/cap/zx297520v3/sources/meta-zxic-custom/recipes-lynq/poweralarm-demo/files/poweralarm-demo.cpp b/cap/zx297520v3/sources/meta-zxic-custom/recipes-lynq/poweralarm-demo/files/poweralarm-demo.cpp
new file mode 100755
index 0000000..199106b
--- /dev/null
+++ b/cap/zx297520v3/sources/meta-zxic-custom/recipes-lynq/poweralarm-demo/files/poweralarm-demo.cpp
@@ -0,0 +1,186 @@
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/types.h>
+#include <unistd.h>
+#include <dlfcn.h>
+#include <stdint.h>
+
+typedef struct
+{
+ int cmdIdx;
+ char *funcName;
+} st_api_test_case;
+
+//for server test
+st_api_test_case at_api_testcases[] =
+{
+ {0, "print_help"},
+ {1, "poweralarm"},
+ {2, "wakealarm"},
+ {3, "cancel_wakealarm"},
+ {4, "lynq_set_poweralarm"},
+ {5, "lynq_set_wakealarm"},
+ {-1, NULL}
+};
+
+
+int (*poweralarm)(char *buffer);
+int (*wakealarm)(char *buffer);
+int (*cancel_wakealarm)();
+int (*lynq_set_poweralarm)(unsigned long time_sec);
+int (*lynq_set_wakealarm)(unsigned long time_sec);
+
+void *dlHandle_poweralarm = NULL;
+
+
+void print_help(void)
+{
+ int i;
+ printf("Supported test cases:\n");
+ for(i = 0; ; i++)
+ {
+ if(at_api_testcases[i].cmdIdx == -1)
+ {
+ break;
+ }
+ printf("%d:\t%s\n", at_api_testcases[i].cmdIdx, at_api_testcases[i].funcName);
+ }
+}
+
+int main(int argc,char *argv[])
+{
+
+ int flag = 0;
+ int cmdIdx = 0;
+ printf("Enter main function\n");
+
+ const char *dlHandle_Path_poweralarm = "/lib/libpoweralarm.so";
+ dlHandle_poweralarm = dlopen(dlHandle_Path_poweralarm, RTLD_NOW);
+ if (dlHandle_poweralarm == NULL)
+ {
+ printf("dlopen dlHandle_fota failed: %s\n", dlerror());
+ return -1;
+ }
+
+ poweralarm = (int (*)(char *buffer))dlsym(dlHandle_poweralarm, "poweralarm");
+ if(poweralarm == NULL)
+ {
+ printf("poweralarm is null\n");
+ return -1;
+ }
+
+ wakealarm = (int (*)(char *buffer))dlsym(dlHandle_poweralarm, "wakealarm");
+ if(wakealarm == NULL)
+ {
+ printf("wakealarm is null\n");
+ return -1;
+ }
+ lynq_set_poweralarm = (int (*)(unsigned long))dlsym(dlHandle_poweralarm,"lynq_set_poweralarm");
+ if(lynq_set_poweralarm == NULL)
+ {
+ printf("lynq_set_poweralarm is null\n");
+ return -1;
+ }
+ lynq_set_wakealarm = (int (*)(unsigned long))dlsym(dlHandle_poweralarm,"lynq_set_wakealarm");
+ if(lynq_set_wakealarm == NULL)
+ {
+ printf("lynq_set_wakealarm is null\n");
+ return -1;
+ }
+
+ cancel_wakealarm = (int (*)())dlsym(dlHandle_poweralarm, "cancel_wakealarm");
+ if(cancel_wakealarm == NULL)
+ {
+ printf("cancel_wakealarm is null\n");
+ return -1;
+ }
+ print_help();
+ while(1)
+ {
+ printf("\nplease input cmd index(-1 exit): ");
+ scanf("%d", &cmdIdx);
+ if(cmdIdx == -1)
+ {
+ break;
+ }
+ switch(cmdIdx)
+ {
+ case 0:
+ print_help();
+ break;
+ case 1:
+ {
+ int ret = 0;
+ char tmp_time[32] = {0};
+ printf("Set poweralarm time,e.g: 60 (seconds)\n");
+ scanf("%s",tmp_time);
+ ret = poweralarm(tmp_time);
+ if(ret != 0)
+ {
+ printf("set poweralarm failed\n");
+ return -1;
+ }
+ break;
+ }
+ case 2:
+ {
+ int ret = 0;
+ char tmp_time[32]={0};
+ printf("Set wakealarm time ,e.g: 60 (seconds)\n");
+ scanf("%s",tmp_time);
+ ret = wakealarm(tmp_time);
+ if(ret != 0)
+ {
+ printf("set poweralarm failed\n");
+ return -1;
+ }
+ break;
+ }
+ case 3:
+ {
+ int ret = 0;
+ ret = cancel_wakealarm();
+ if(ret != 0)
+ {
+ printf("Cancel_wakealarm failed!!!");
+ return -1;
+ }
+ break;
+ }
+ case 4:
+ {
+ int ret = 0;
+ unsigned long time_sec = 0;
+ printf("Input time_sec you want poweralarm,e.g:60 (seconds)\n");
+ scanf("%lu",&time_sec);
+ ret =lynq_set_poweralarm(time_sec);
+ if(ret != 0)
+ {
+ printf("lynq_set_poweralarm failed\n");
+ return -1;
+ }
+
+ }
+ case 5:
+ {
+ int ret = 0;
+ unsigned long time_sec = 0;
+ printf("Input time_sec you want poweralarm,e.g:60 (seconds)\n");
+ scanf("%lu",&time_sec);
+ ret =lynq_set_wakealarm(time_sec);
+ if(ret != 0)
+ {
+ printf("lynq_set_wakealarm failed\n");
+ return -1;
+ }
+ }
+
+ default:
+ break;
+ }
+ }
+ return 0;
+
+}
+
diff --git a/cap/zx297520v3/sources/meta-zxic-custom/recipes-lynq/poweralarm-demo/poweralarm-demo.bb b/cap/zx297520v3/sources/meta-zxic-custom/recipes-lynq/poweralarm-demo/poweralarm-demo.bb
new file mode 100644
index 0000000..978dd0b
--- /dev/null
+++ b/cap/zx297520v3/sources/meta-zxic-custom/recipes-lynq/poweralarm-demo/poweralarm-demo.bb
@@ -0,0 +1,33 @@
+# Package summary
+SUMMARY = "poweralarm-demo"
+# License, for example MIT
+LICENSE = "MIT"
+# License checksum file is always required
+LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-licenses/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
+
+SRC_URI = " file://poweralarm-demo.cpp"
+
+SRC-DIR = "${S}/../poweralarm-demo"
+TARGET_CC_ARCH += "${LDFLAGS}"
+
+#Parameters passed to do_compile()
+EXTRA_OEMAKE = "'TARGET_PLATFORM = ${TARGET_PLATFORM}'\"
+EXTRA_OEMAKE += "'MOBILETEK_RIL_CFG = ${MOBILETEK_RIL_CFG}'"
+
+LOCAL_C_INCLUDES = "-I."
+
+LOCAL_LIBS = "-L. -ldl -lstdc++"
+
+#INHIBIT_PACKAGE_STRIP = "1"
+S = "${WORKDIR}"
+
+#INHIBIT_PACKAGE_STRIP = "1"
+do_compile () {
+
+ ${CXX} -Wall poweralarm-demo.cpp ${LOCAL_LIBS} ${LOCAL_C_INCLUDES} -o poweralarm-demo
+}
+
+do_install() {
+ install -d ${D}${bindir}/
+ install -m 0755 ${S}/poweralarm-demo ${D}${bindir}/
+}
diff --git a/cap/zx297520v3/src/lynq/lib/liblynq-call/lynq_call.cpp b/cap/zx297520v3/src/lynq/lib/liblynq-call/lynq_call.cpp
index bee6e5e..9525e75 100755
--- a/cap/zx297520v3/src/lynq/lib/liblynq-call/lynq_call.cpp
+++ b/cap/zx297520v3/src/lynq/lib/liblynq-call/lynq_call.cpp
@@ -808,7 +808,6 @@
return LYNQ_E_CONFLICT;
}
lynq_call_hungup_all();
- lynq_set_voice_audio_mode(AUDIO_MODE_CODEC);
g_module_init_flag = MODULE_SWITCHING;
lynq_close_all_urc_socket_thread();
lynq_close_all_rc_socket_thread();
diff --git a/cap/zx297520v3/src/lynq/lib/liblynq-systime/LICENSE b/cap/zx297520v3/src/lynq/lib/liblynq-systime/LICENSE
new file mode 100755
index 0000000..605b7ea
--- /dev/null
+++ b/cap/zx297520v3/src/lynq/lib/liblynq-systime/LICENSE
@@ -0,0 +1,31 @@
+Copyright Statement:
+
+This software/firmware and related documentation ("MobileTek Software") are
+protected under relevant copyright laws. The information contained herein is
+confidential and proprietary to MobileTek Inc. and/or its licensors. Without
+the prior written permission of MobileTek inc. and/or its licensors, any
+reproduction, modification, use or disclosure of MobileTek Software, and
+information contained herein, in whole or in part, shall be strictly
+prohibited.
+
+MobileTek Inc. (C) 2015. All rights reserved.
+
+BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MobileTek SOFTWARE")
+RECEIVED FROM MobileTek AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER
+ON AN "AS-IS" BASIS ONLY. MobileTek EXPRESSLY DISCLAIMS ANY AND ALL
+WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
+WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
+NONINFRINGEMENT. NEITHER DOES MobileTek PROVIDE ANY WARRANTY WHATSOEVER WITH
+RESPECT TO THE SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY,
+INCORPORATED IN, OR SUPPLIED WITH THE MobileTek SOFTWARE, AND RECEIVER AGREES
+TO LOOK ONLY TO SUCH THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO.
+RECEIVER EXPRESSLY ACKNOWLEDGES THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO
+OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES CONTAINED IN MobileTek
+SOFTWARE. MobileTek SHALL ALSO NOT BE RESPONSIBLE FOR ANY MobileTek SOFTWARE
+RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
+STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MobileTek'S
+ENTIRE AND CUMULATIVE LIABILITY WITH RESPECT TO THE MobileTek SOFTWARE
+RELEASED HEREUNDER WILL BE, AT MobileTek'S OPTION, TO REVISE OR REPLACE THE
+MobileTek SOFTWARE AT ISSUE, OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE
+CHARGE PAID BY RECEIVER TO MobileTek FOR SUCH MobileTek SOFTWARE AT ISSUE.
diff --git a/cap/zx297520v3/src/lynq/lib/liblynq-systime/include/lynq_systime.h b/cap/zx297520v3/src/lynq/lib/liblynq-systime/include/lynq_systime.h
new file mode 100755
index 0000000..001edda
--- /dev/null
+++ b/cap/zx297520v3/src/lynq/lib/liblynq-systime/include/lynq_systime.h
@@ -0,0 +1,123 @@
+/**@file lynq-systime.h
+ *
+ * @brief Sync systime form each time source.
+ *
+ * @author sj.zhang
+ *
+ * @date 2023-08-14
+ *
+ * @version V1.0
+ *
+ * @copyright Copyright (c) MobileTek
+ */
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <time.h>
+#include <include/lynq_uci.h>
+
+#ifndef _LYNQ_SYSTIME_H_
+#define _LYNQ_SYSTIME_H_
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+typedef struct time_source_status
+{
+ int ntp;
+ int nitz;
+ int gnss;
+}time_src_status_s;
+
+#ifdef MOBILETEK_TARGET_PLATFORM_T106
+
+ /**@brief Set the rtc time to the system time.
+ *
+ * @param void
+ *
+ * @return
+ * 0:success
+ * other:failure
+ */
+ int lynq_sync_time_from_rtc(void);
+
+ /**@brief Set the system time to the rtc time.
+ *
+ * @param void
+ *
+ * @return
+ * 0:success
+ * other:failure
+ */
+ int lynq_set_rtc_time(void);
+
+ /**@brief Query the rtc time.
+ *
+ * @param [OUT] ulsec: rtc time, secconds from 1900.1.1 00:00
+ *
+ * @return
+ * 0:success
+ * other:failure
+ */
+ int lynq_get_rtc_time(unsigned long *ulsec);
+#endif
+
+ /**@brief Query the time source status now.
+ *
+ * @param [OUT] ntp, nitz, gnss:
+ * 0: disable
+ * 1: enable
+ *
+ * @return
+ * 0 : success
+ * other:failure
+ */
+ int lynq_get_time_src_status(time_src_status_s *time_src);
+
+ /**@brief Turn sntp on/off
+ *
+ * @param enable [IN] : 0 disenable; 1 enable;
+ *
+ * @return
+ * 0 set success
+ * 1 SNTP_DISENABLE
+ * 2 SNTP_ALREADY_ENABLE
+ */
+ int ntp_sync_time(int enable);
+
+ /**@brief Enable/Disenable sync time from NITZ.
+ *
+ * @param enable [IN] : 0 disenable; 1 enable;
+ *
+ * @return
+ * 0:success
+ * other:failure
+ */
+ int modem_time_enable(int enable);
+
+ /**@brief Enable/Disenable sync time from GNSS.
+ *
+ * @param enable [IN] : 0 disenable; 1 enable;
+ *
+ * @return
+ * 0:success
+ * other:failure
+ */
+ int gnss_time_enable(int enable);
+
+ /**@brief User set systime manually.
+ *
+ * @param enable [IN] : 0 disenable; 1 enable;
+ *
+ * @return
+ * 0:success
+ * other:failure
+ */
+ int user_set_time(char *date, char *time);
+
+#ifdef __cplusplus
+}
+#endif
+#endif
diff --git a/cap/zx297520v3/src/lynq/lib/liblynq-systime/lynq_systime.cpp b/cap/zx297520v3/src/lynq/lib/liblynq-systime/lynq_systime.cpp
new file mode 100755
index 0000000..6b7351b
--- /dev/null
+++ b/cap/zx297520v3/src/lynq/lib/liblynq-systime/lynq_systime.cpp
@@ -0,0 +1,382 @@
+/**@file lynq-systime.cpp
+ *
+ * @brief Sync systime form different time source.
+ *
+ * @author sj.zhang
+ *
+ * @date 2023-08-15
+ *
+ * @version V1.0
+ *
+ * @copyright Copyright (c) MobileTek
+ */
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <time.h>
+#include <unistd.h>
+#include <include/lynq_uci.h>
+#include "liblog/lynq_deflog.h"
+#include "lynq_systime.h"
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+#define USER_LOG_TAG "LYNQ_SYSTIME"
+#define LOG_LEVEL 4
+
+#define LYNQ_SYNC_TIME_SECTION "lynq_sync_time"
+#define LYNQ_MODEM_TIME_KEY "lynq_modem_sync_time_enable"
+#define LYNQ_GNSS_TIME_KEY "lynq_gnss_sync_time_enable"
+#define BUF_LEN 258
+#define TIME_BUF 100
+#define SYNC_TIME_SUCCESS 0
+#define NTP_ALREADY_ENABLE 1
+#define NTP_ALREADY_DISABLE 2
+
+#define OPEN_ERROR 7
+#define ERROR_PARA 8
+
+#ifdef MOBILETEK_TARGET_PLATFORM_T106
+#define NTP_RESTART_BUF "/etc/init.d/sntp restart"
+#define NTP_STOP_BUF "/etc/init.d/sntp stop"
+#define NTP_START_BUF "/etc/init.d/sntp start"
+#define PGREP_NTP_DARMON "pgrep -x /usr/bin/sntp"
+#define SET_RTC() lynq_set_rtc_time()
+#else
+#define NTP_RESTART_BUF "systemctl restart ntpd"
+#define NTP_STOP_BUF "systemctl stop ntpd"
+#define NTP_START_BUF "systemctl start ntpd"
+#define PGREP_NTP_DARMON "pgrep ntpd"
+#define SET_RTC() system("hwclock -w -f /dev/rtc0")
+#endif
+
+#ifdef MOBILETEK_TARGET_PLATFORM_T106
+ typedef int (*sc_rtc_time_get_cb)(unsigned int src_id, unsigned long ulsec);
+extern int sc_rtc_timer_init(void);
+extern int sc_rtc_timer_uninit(void);
+extern int sc_rtc_time_set(int srcid);
+extern int sc_rtc_time_get(int srcid, sc_rtc_time_get_cb rtc_notify);
+
+char sync_from_rtc_cb_flag = 1;
+char rtc_time_get_cb_flag = 1;
+static unsigned long s_rtc_sec = 0;
+
+static int sync_from_rtc_cb(unsigned int src_id, unsigned long ulsec)
+{
+ LYLOGSET(LOG_LEVEL);
+ LYLOGEINIT(USER_LOG_TAG);
+ LYDBGLOG("[%s][%d] enter.\n", __FUNCTION__, __LINE__);
+ sync_from_rtc_cb_flag = 1;
+ struct tm rtc_time = {0};
+ time_t tmp = 0;
+ char command[100] = "";
+ tmp = (time_t)ulsec;
+ rtc_time = *localtime(&tmp);
+
+ LYINFLOG("RTC time now is: %d-%d-%d,%d:%d:%d\n",
+ rtc_time.tm_year + 1900, rtc_time.tm_mon + 1, rtc_time.tm_mday, rtc_time.tm_hour, rtc_time.tm_min, rtc_time.tm_sec);
+ snprintf(command, sizeof(command), "date --set=\'@%lu\' ", ulsec);
+ system(command);
+ sync_from_rtc_cb_flag = 0;
+ return 0;
+}
+
+static int rtc_time_get_cb(unsigned int src_id, unsigned long ulsec)
+{
+ LYLOGSET(LOG_LEVEL);
+ LYLOGEINIT(USER_LOG_TAG);
+ LYDBGLOG("[%s][%d] enter.\n", __FUNCTION__, __LINE__);
+ rtc_time_get_cb_flag = 1;
+ s_rtc_sec = ulsec;
+ struct tm rtc_time = {0};
+ time_t tmp = 0;
+ tmp = (time_t)ulsec;
+ rtc_time = *localtime(&tmp);
+ LYINFLOG("RTC time now is: %d-%d-%d,%d:%d:%d\n",
+ rtc_time.tm_year + 1900, rtc_time.tm_mon + 1, rtc_time.tm_mday, rtc_time.tm_hour, rtc_time.tm_min, rtc_time.tm_sec);
+ rtc_time_get_cb_flag = 0;
+ return 0;
+}
+
+int lynq_sync_time_from_rtc(void)
+{
+ LYLOGSET(LOG_LEVEL);
+ LYLOGEINIT(USER_LOG_TAG);
+ LYDBGLOG("[%s][%d] enter.\n", __FUNCTION__, __LINE__);
+ int ret = -1;
+ int srcid = -1;
+ int i = 0;
+ if ((srcid = sc_rtc_timer_init()) <= 0)
+ {
+ LYERRLOG("rtc_timer_demo:rtc_timer_init fail!\n");
+ return -1;
+ }
+ ret = sc_rtc_time_get(srcid, sync_from_rtc_cb);
+ if (ret != 0)
+ {
+ LYERRLOG("sc_rtc_time_get failed !\n");
+ sc_rtc_timer_uninit();
+ return -1;
+ }
+
+ // Wait for the callback function to finish executing. But 5 seconds tops.
+ for (i = 25; i > 0; i--)
+ {
+ if (sync_from_rtc_cb_flag == 0)
+ break;
+ usleep(200000);
+ }
+
+ if (sync_from_rtc_cb_flag != 0)
+ {
+ LYERRLOG("rtc_get_time_cb failed\n");
+ sc_rtc_timer_uninit();
+ return -1;
+ }
+ LYINFLOG("sync from rtc success\n");
+ ret = sc_rtc_timer_uninit();
+ if (0 != ret)
+ {
+ LYERRLOG("uninit failed \n");
+ return -1;
+ }
+ return 0;
+}
+
+int lynq_set_rtc_time(void)
+{
+ LYLOGSET(LOG_LEVEL);
+ LYLOGEINIT(USER_LOG_TAG);
+ LYDBGLOG("[%s][%d] enter.\n", __FUNCTION__, __LINE__);
+ int ret = -1;
+ int srcid = -1;
+ if ((srcid = sc_rtc_timer_init()) <= 0)
+ {
+ LYERRLOG("rtc_timer_demo:rtc_timer_init fail!\n");
+ return -1;
+ }
+ ret = sc_rtc_time_set(srcid);
+ if (ret != 0)
+ {
+ LYERRLOG("sc_rtc_time_set failed !\n");
+ return -1;
+ }
+ ret = sc_rtc_timer_uninit();
+ if (0 != ret)
+ {
+ LYERRLOG("uninit failed \n");
+ return -1;
+ }
+ return 0;
+}
+
+int lynq_get_rtc_time(unsigned long *ulsec)
+{
+ LYLOGSET(LOG_LEVEL);
+ LYLOGEINIT(USER_LOG_TAG);
+ LYDBGLOG("[%s][%d] enter.\n", __FUNCTION__, __LINE__);
+ int ret = -1;
+ int srcid = -1;
+ int i = 0;
+ if (NULL == ulsec)
+ {
+ LYERRLOG("NULL parameter!\n");
+ return ERROR_PARA;
+ }
+ if ((srcid = sc_rtc_timer_init()) <= 0)
+ {
+ LYERRLOG("rtc_timer_demo:rtc_timer_init fail!\n");
+ return -1;
+ }
+ ret = sc_rtc_time_get(srcid, rtc_time_get_cb);
+ if (ret != 0)
+ {
+ LYERRLOG("sc_rtc_time_get failed !\n");
+ sc_rtc_timer_uninit();
+ return -1;
+ }
+
+ // Wait for the callback function to finish executing. But 5 seconds tops.
+ for (i = 25; i > 0; i--)
+ {
+ if (rtc_time_get_cb_flag == 0)
+ break;
+ usleep(200000);
+ }
+ if (rtc_time_get_cb_flag != 0)
+ {
+ LYERRLOG("rtc_get_time_cb failed\n");
+ sc_rtc_timer_uninit();
+ return -1;
+ }
+ *ulsec = s_rtc_sec;
+ ret = sc_rtc_timer_uninit();
+ if (0 != ret)
+ {
+ LYERRLOG("uninit failed \n");
+ return -1;
+ }
+ return 0;
+}
+#endif
+
+int lynq_get_time_src_status(time_src_status_s *time_src)
+{
+ LYLOGSET(LOG_LEVEL);
+ LYLOGEINIT(USER_LOG_TAG);
+ LYDBGLOG("[%s][%d] enter.\n", __FUNCTION__, __LINE__);
+ char nitz_enable[8] = "";
+ char gnss_enable[8] = "";
+ char buf[BUF_LEN] = "";
+ if (NULL == time_src)
+ {
+ LYERRLOG("NULL parameter!\n");
+ return ERROR_PARA;
+ }
+ // get ntp status.
+ int ret = system(PGREP_NTP_DARMON);
+ if (0 == ret)
+ {
+ time_src->ntp = 1;
+ }
+ else
+ {
+ time_src->ntp = 0;
+ }
+
+ // get nitz status
+ sprintf(buf, "%s.%s.%s", LYNQ_UCI_FILE, LYNQ_SYNC_TIME_SECTION, LYNQ_MODEM_TIME_KEY);
+ lynq_uci_get(buf, nitz_enable);
+ time_src->nitz = atoi(nitz_enable);
+
+ // get gnss status
+ sprintf(buf, "%s.%s.%s", LYNQ_UCI_FILE, LYNQ_SYNC_TIME_SECTION, LYNQ_GNSS_TIME_KEY);
+ lynq_uci_get(buf, gnss_enable);
+ time_src->gnss = atoi(gnss_enable);
+
+ return 0;
+}
+
+const char *lynq_read_version()
+{
+ return "SYSTIME_V1.0";
+}
+
+int user_set_time(char *date, char *time)
+{
+ LYLOGSET(LOG_LEVEL);
+ LYLOGEINIT(USER_LOG_TAG);
+ LYDBGLOG("[%s][%d] enter.\n", __FUNCTION__, __LINE__);
+ char cmd_buf[TIME_BUF] = "";
+ if (NULL == date || NULL == time)
+ {
+ LYERRLOG("NULL parameter!\n");
+ return ERROR_PARA;
+ }
+
+ // set systime
+ snprintf(cmd_buf, sizeof(cmd_buf), "date -s %s+%s", date, time);
+ system(cmd_buf);
+
+ // set RTC by macrofunction
+ SET_RTC();
+ return 0;
+}
+
+int ntp_sync_time(int enable)
+{
+ LYLOGSET(LOG_LEVEL);
+ LYLOGEINIT(USER_LOG_TAG);
+ LYDBGLOG("[%s][%d] enter.\n", __FUNCTION__, __LINE__);
+ if (enable != 0 && enable != 1)
+ {
+ LYERRLOG("Parameter error! Only 0/1 allowed.\n");
+ return ERROR_PARA;
+ }
+ int ret = system(PGREP_NTP_DARMON);
+ if (0 == ret)
+ {
+ if (enable)
+ {
+ system(NTP_RESTART_BUF);
+ return NTP_ALREADY_ENABLE;
+ }
+ else
+ {
+ system(NTP_STOP_BUF);
+ return SYNC_TIME_SUCCESS;
+ }
+ }
+ else
+ {
+ if (enable)
+ {
+ // Only one time source is allowed to run simultaneously.
+ modem_time_enable(0);
+ gnss_time_enable(0);
+ system(NTP_START_BUF);
+ return SYNC_TIME_SUCCESS;
+ }
+ else
+ {
+ return NTP_ALREADY_DISABLE;
+ }
+ }
+}
+
+int modem_time_enable(int enable)
+{
+ LYLOGSET(LOG_LEVEL);
+ LYLOGEINIT(USER_LOG_TAG);
+ LYDBGLOG("[%s][%d] enter.\n", __FUNCTION__, __LINE__);
+ char buf[BUF_LEN] = "";
+ int ret = 0;
+ if (enable != 0 && enable != 1)
+ {
+ LYERRLOG("Parameter error! Only 0/1 allowed.\n");
+ return ERROR_PARA;
+ }
+ if (enable)
+ {
+ // Only one time source is allowed to run simultaneously.
+ ntp_sync_time(0);
+ gnss_time_enable(0);
+ }
+ sprintf(buf, "%s.%s.%s=%d", LYNQ_UCI_FILE, LYNQ_SYNC_TIME_SECTION, LYNQ_MODEM_TIME_KEY, enable);
+ ret = lynq_uci_set(buf);
+ if (ret == 4)
+ ret = 0;
+ return ret;
+}
+
+int gnss_time_enable(int enable)
+{
+ LYLOGSET(LOG_LEVEL);
+ LYLOGEINIT(USER_LOG_TAG);
+ LYDBGLOG("[%s][%d] enter.\n", __FUNCTION__, __LINE__);
+ char buf[BUF_LEN] = "";
+ int ret = 0;
+ if (enable != 0 && enable != 1)
+ {
+ LYERRLOG("Parameter error! Only 0/1 allowed.\n");
+ return ERROR_PARA;
+ }
+ if (enable)
+ {
+ // Only one time source is allowed to run simultaneously.
+ ntp_sync_time(0);
+ modem_time_enable(0);
+ }
+ sprintf(buf, "%s.%s.%s=%d", LYNQ_UCI_FILE, LYNQ_SYNC_TIME_SECTION, LYNQ_GNSS_TIME_KEY, enable);
+ ret = lynq_uci_set(buf);
+ if (ret == 4)
+ ret = 0;
+ return ret;
+}
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/cap/zx297520v3/src/lynq/lib/liblynq-systime/makefile b/cap/zx297520v3/src/lynq/lib/liblynq-systime/makefile
new file mode 100755
index 0000000..758315f
--- /dev/null
+++ b/cap/zx297520v3/src/lynq/lib/liblynq-systime/makefile
@@ -0,0 +1,75 @@
+SHELL = /bin/sh
+RM = rm -f
+
+LOCAL_CFLAGS := -Wall \
+ -std=gnu++14 \
+ -g -Os \
+ -flto \
+ -fPIC \
+ -fpermissive \
+
+ifeq ($(strip $(TARGET_PLATFORM)), T106)
+LOCAL_CFLAGS += -DBINDER_IPC_32BIT=1 -DHAVE_ENDIAN_H -DHAVE_PTHREADS -DHAVE_SYS_UIO_H -DHAVE_POSIX_FILEMAP -DHAVE_STRLCPY -DHAVE_PRCTL -DHAVE_MEMSET16 -DHAVE_MEMSET32 -DANDROID_SMP=0
+endif
+
+ifeq ($(strip $(TARGET_PLATFORM)), T106)
+LOCAL_CFLAGS += -DMOBILETEK_TARGET_PLATFORM_T106
+endif
+
+LOCAL_CFLAGS += $(CFLAGS)
+$(warning ################# rock ROOT: $(ROOT),includedir:$(includedir),)
+
+LOCAL_PATH = .
+
+LOCAL_C_INCLUDES = \
+ -I. \
+ -I$(LOCAL_PATH)/include \
+ -I$(ROOT)$(includedir)/logger \
+ -I$(ROOT)$(includedir)/liblog \
+ -I$(ROOT)$(includedir) \
+
+
+LOCAL_LIBS := \
+ -L. \
+ -ldl \
+ -lstdc++ \
+ -lpthread \
+ -lsctel \
+ -llynq-uci \
+ -llynq-log \
+
+
+SOURCES = $(wildcard *.cpp)
+
+EXECUTABLE = liblynq-systime.so
+
+OBJECTS=$(SOURCES:.cpp=.o)
+
+.PHONY: build clean install pack_rootfs
+
+all: build
+$(EXECUTABLE): $(OBJECTS)
+ $(CXX) -shared -Wl,--no-undefined $(OBJECTS) $(LOCAL_LIBS) $(LOCAL_CFLAGS) $(LOCAL_C_INCLUDES) -o $@
+
+%.o : %.cpp
+ $(CXX) $(LOCAL_C_INCLUDES) $(LOCAL_CFLAGS) $(LOCAL_LIBS) -o $@ -c $<
+
+build: $(EXECUTABLE)
+ $(warning ########## build $(EXECUTABLE) ##########)
+
+install:
+ mkdir -p $(ROOT)$(base_libdir)/
+ install $(EXECUTABLE) $(ROOT)$(base_libdir)/
+ mkdir -p $(ROOT)$(includedir)/$(NAME)/sdk
+
+pack_rootfs:
+ mkdir -p $(PACK_INITRAMFS_TO)$(base_libdir)/
+ cp -af $(EXECUTABLE) $(PACK_INITRAMFS_TO)$(base_libdir)/
+ $(CROSS)strip $(PACK_INITRAMFS_TO)$(base_libdir)/$(EXECUTABLE)
+ mkdir -p $(PACK_TO)$(base_libdir)/
+ cp -af $(EXECUTABLE) $(PACK_TO)$(base_libdir)/
+ $(CROSS)strip $(PACK_TO)$(base_libdir)/$(EXECUTABLE)
+.PHONY: clean
+clean:
+ $(RM) $(OBJECTS) $(EXECUTABLE)
+
diff --git a/cap/zx297520v3/src/lynq/lib/liblynq-uci/lynq_uci.config b/cap/zx297520v3/src/lynq/lib/liblynq-uci/lynq_uci.config
index 3ac501d..f77fd37 100755
--- a/cap/zx297520v3/src/lynq/lib/liblynq-uci/lynq_uci.config
+++ b/cap/zx297520v3/src/lynq/lib/liblynq-uci/lynq_uci.config
@@ -9,7 +9,8 @@
option gateway '192.168.11.1'
config lynq_sync_time_rw 'lynq_sync_time'
-
+ option lynq_modem_sync_time_enable '0'
+ option lynq_gnss_sync_time_enable '0'
config lynq_autosuspend 'lynq_autosuspend'
option auto_enable '0'
option debug '1'
diff --git a/cap/zx297520v3/src/lynq/lib/libpoweralarm/LICENSE b/cap/zx297520v3/src/lynq/lib/libpoweralarm/LICENSE
new file mode 100644
index 0000000..7ac229e
--- /dev/null
+++ b/cap/zx297520v3/src/lynq/lib/libpoweralarm/LICENSE
@@ -0,0 +1,31 @@
+Copyright Statement:
+
+This software/firmware and related documentation ("MediaTek Software") are
+protected under relevant copyright laws. The information contained herein is
+confidential and proprietary to Mobiletek Inc. and/or its licensors. Without
+the prior written permission of Mobiletek inc. and/or its licensors, any
+reproduction, modification, use or disclosure of MediaTek Software, and
+information contained herein, in whole or in part, shall be strictly
+prohibited.
+
+Mobiletek Inc. (C) 2015. All rights reserved.
+
+BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("Mobiletek SOFTWARE")
+RECEIVED FROM MOBILETEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER
+ON AN "AS-IS" BASIS ONLY. MOBILETEK EXPRESSLY DISCLAIMS ANY AND ALL
+WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
+WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
+NONINFRINGEMENT. NEITHER DOES MOBILETEK PROVIDE ANY WARRANTY WHATSOEVER WITH
+RESPECT TO THE SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY,
+INCORPORATED IN, OR SUPPLIED WITH THE MOBILETEK SOFTWARE, AND RECEIVER AGREES
+TO LOOK ONLY TO SUCH THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO.
+RECEIVER EXPRESSLY ACKNOWLEDGES THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO
+OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES CONTAINED IN MOBILETEK
+SOFTWARE. MOBILETEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MOBILETEK SOFTWARE
+RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
+STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MOBILETEK'S
+ENTIRE AND CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE
+RELEASED HEREUNDER WILL BE, AT MOBILETEK'S OPTION, TO REVISE OR REPLACE THE
+MOBILETEK SOFTWARE AT ISSUE, OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE
+CHARGE PAID BY RECEIVER TO MOBILETEK FOR SUCH MOBILETEK SOFTWARE AT ISSUE.
diff --git a/cap/zx297520v3/src/lynq/lib/libpoweralarm/include/libpoweralarm.h b/cap/zx297520v3/src/lynq/lib/libpoweralarm/include/libpoweralarm.h
new file mode 100755
index 0000000..54191a6
--- /dev/null
+++ b/cap/zx297520v3/src/lynq/lib/libpoweralarm/include/libpoweralarm.h
@@ -0,0 +1,30 @@
+/*******************************************************
+*
+* @brief: none
+* @details: add libpoweralarm api
+* @author: l.yang
+* @date: 2023.8.21
+* @version: V1.0
+* @copyright：Copyright (c) MobileTek
+*
+*********************************************/
+
+#ifndef _LYNQ_POWERALARM_
+#define _LYNQ_POWERALARM_
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+ssize_t poweralarm(char * buffer);
+ssize_t wakealarm(char *buffer);
+ssize_t cancel_wakealarm(void);
+int lynq_set_wakealarm(unsigned long time_sec);
+int lynq_set_poweralarm(unsigned long time_sec);
+
+
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+
diff --git a/cap/zx297520v3/src/lynq/lib/libpoweralarm/libpoweralarm.cpp b/cap/zx297520v3/src/lynq/lib/libpoweralarm/libpoweralarm.cpp
new file mode 100755
index 0000000..945e0a4
--- /dev/null
+++ b/cap/zx297520v3/src/lynq/lib/libpoweralarm/libpoweralarm.cpp
@@ -0,0 +1,274 @@
+/*******************************************************
+*
+* @brief: none
+* @details: Add wakealrm and poweralarm api code
+* @author: l.yang
+* @date: 2023.8.17
+* @version: V1.0
+* @copyright： Copyright (c) MobileTek
+*
+*********************************************/
+
+#include<stdio.h>
+#include<stdlib.h>
+#include<unistd.h>
+#include<stdbool.h>
+#include<log/log.h>
+#include "liblog/lynq_deflog.h"
+#include <include/libpoweralarm.h>
+#include <pthread.h>
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define USER_LOG_TAG "LYNQ_POWERALARM"
+
+
+static int wk_rtc_id = 1;
+static int pw_rtc_id = 2;
+static int wk_srcid = 0;
+
+typedef int (*sc_rtc_timer_exp_cb)(unsigned int src_id, int rtc_id);
+extern int sc_rtc_timer_init(void);
+extern int sc_rtc_timer_uninit(void );
+extern int sc_rtc_timer_add(int srcid, int rtc_id, unsigned long ulSec, sc_rtc_timer_exp_cb rtc_notify);
+extern int sc_rtc_timer_del(int srcid, int rtc_id);
+
+
+
+/*****************************************
+* @brief:sc_rtc_timer_add_cb
+* @param count [IN]:src_id, rtc_id,
+* @param sum [OUT]:NA
+* @return :0
+* @todo:
+* @see:NA
+* @warning:
+******************************************/
+int sc_rtc_timer_add_cb(unsigned int src_id, int rtc_id)
+{
+ return 0;
+}
+
+
+/*****************************************
+* @brief:Set wakealarm time
+* @param count [IN]:buffer,
+* @param sum [OUT]:NA
+* @return :success 0, failed -1
+* @todo:
+* @see:NA
+* @warning:
+******************************************/
+ssize_t wakealarm(char *buffer)
+{
+ unsigned long time_sec = 0;
+ int ret = 0;
+
+ LYLOGSET(LOG_INFO);
+ LYLOGEINIT(USER_LOG_TAG);
+
+ if(buffer == NULL)
+ {
+ LYINFLOG("Bad input parameter,exit!!!!");
+ return -1;
+ }
+
+ time_sec = atoll(buffer);
+
+ LYINFLOG("Set wakealarm %lu seconds ",time_sec);
+ wk_srcid = sc_rtc_timer_init();
+ if (wk_srcid <= 0)
+ {
+ LYINFLOG("rtc_timer_init fail!");
+ return -1;
+ }
+ ret = sc_rtc_timer_add(wk_srcid, wk_rtc_id, time_sec, sc_rtc_timer_add_cb);
+ if(ret < 0)
+ {
+ LYINFLOG("Add rtc timer failed!!!!");
+ return -1;
+ }
+
+ LYINFLOG("Set wakealarm success !!!");
+
+ ret = sc_rtc_timer_uninit();
+ if(ret != 0)
+ {
+ LYINFLOG("Deinit failed");
+ }
+
+ return 0;
+
+}
+
+
+/*****************************************
+* @brief:set poweralarm time
+* @param count [IN]:buffer,
+* @param sum [OUT]:NA
+* @return :success 0, failed -1
+* @todo:
+* @see:NA
+* @warning:
+******************************************/
+ssize_t poweralarm(char *buffer)
+{
+ int srcid = 0;
+ unsigned long time_sec = 0;
+ int ret = 0;
+
+ LYLOGSET(LOG_INFO);
+ LYLOGEINIT(USER_LOG_TAG);
+
+ if(buffer == NULL)
+ {
+ LYINFLOG("Bad input parameter,exit!!!!");
+ return -1;
+ }
+
+ time_sec = atoll(buffer);
+
+ LYINFLOG("Set poweralarm %lu seconds",time_sec);
+ srcid = sc_rtc_timer_init();
+ if (srcid <= 0)
+ {
+ LYINFLOG("rtc_timer_init fail!");
+ return -1;
+ }
+ ret = sc_rtc_timer_add(srcid, pw_rtc_id, time_sec, sc_rtc_timer_add_cb);
+ if(ret < 0)
+ {
+ LYINFLOG("Add rtc timer failed!!!!");
+ return -1;
+ }
+
+ LYINFLOG("Set poweralarm success !!!");
+
+ ret = sc_rtc_timer_uninit();
+ if(ret != 0)
+ {
+ LYINFLOG("Deinit failed");
+ }
+
+ return 0;
+
+}
+
+/**********************************************
+* @brief:cancel_wakealarm,
+* @param count [IN]:void
+* @param sum [OUT]:NA
+* @return :success 0, failed -1
+* @todo:
+* @see:NA
+* @warning:
+********************************************/
+ssize_t cancel_wakealarm(void)
+{
+ int ret = 0;
+
+ LYINFLOG("Enter cancel_wakealarm ");
+ ret = sc_rtc_timer_del(wk_srcid, wk_rtc_id);
+ if(ret < 0)
+ {
+ LYINFLOG("Del wakealarm failed!!!");
+ return -1;
+ }
+
+ return 0;
+
+}
+
+
+/*****************************************
+* @brief:lynq_set_poweralarm
+* @param count [IN]:unsigned long time_sec
+* @param sum [OUT]:NA
+* @return :success 0, failed -1
+* @todo:
+* @see:NA
+* @warning:
+******************************************/
+int lynq_set_poweralarm(unsigned long time_sec)
+{
+ LYLOGSET(LOG_INFO);
+ LYLOGEINIT(USER_LOG_TAG);
+ int ret = 0;
+ int srcid = 0;
+ LYINFLOG("lynq_set_poweralarm %lu seconds",time_sec);
+ srcid = sc_rtc_timer_init();
+ if (srcid <= 0)
+ {
+ LYINFLOG("rtc_timer_init fail!");
+ return -1;
+ }
+ ret = sc_rtc_timer_add(srcid, pw_rtc_id, time_sec, sc_rtc_timer_add_cb);
+ if(ret < 0)
+ {
+ LYINFLOG("Add rtc timer failed!!!!");
+ return -1;
+ }
+
+ LYINFLOG("Set poweralarm success !!!");
+
+ ret = sc_rtc_timer_uninit();
+ if(ret != 0)
+ {
+ LYINFLOG("Deinit failed");
+ }
+
+ return 0;
+
+}
+
+
+/*****************************************
+* @brief:lynq_set_wakealarm
+* @param count [IN]:unsigned long time_sec
+* @param sum [OUT]:NA
+* @return :success 0, failed -1
+* @todo:
+* @see:NA
+* @warning:
+******************************************/
+int lynq_set_wakealarm(unsigned long time_sec)
+{
+ int ret = 0;
+
+ LYLOGSET(LOG_INFO);
+ LYLOGEINIT(USER_LOG_TAG);
+
+ LYINFLOG("lynq_set_wakealarm %lu seconds ",time_sec);
+ wk_srcid = sc_rtc_timer_init();
+ if (wk_srcid <= 0)
+ {
+ LYINFLOG("rtc_timer_init fail!");
+ return -1;
+ }
+ ret = sc_rtc_timer_add(wk_srcid, wk_rtc_id, time_sec, sc_rtc_timer_add_cb);
+ if(ret < 0)
+ {
+ LYINFLOG("Add rtc timer failed!!!!");
+ return -1;
+ }
+
+ LYINFLOG("Set wakealarm success !!!");
+
+ ret = sc_rtc_timer_uninit();
+ if(ret != 0)
+ {
+ LYINFLOG("Deinit failed!!!");
+ }
+
+ return 0;
+
+}
+
+
+#ifdef __cplusplus
+}
+#endif
+
diff --git a/cap/zx297520v3/src/lynq/lib/libpoweralarm/makefile b/cap/zx297520v3/src/lynq/lib/libpoweralarm/makefile
new file mode 100755
index 0000000..fc6916f
--- /dev/null
+++ b/cap/zx297520v3/src/lynq/lib/libpoweralarm/makefile
@@ -0,0 +1,75 @@
+SHELL = /bin/sh
+RM = rm -f
+
+LOCAL_CFLAGS := -Wall \
+ -std=gnu++14 \
+ -g -Os \
+ -flto \
+ -fPIC \
+ -fpermissive \
+
+
+
+ifeq ($(strip $(TARGET_PLATFORM)), T106)
+LOCAL_CFLAGS += -DBINDER_IPC_32BIT=1 -DHAVE_ENDIAN_H -DHAVE_PTHREADS -DHAVE_SYS_UIO_H -DHAVE_POSIX_FILEMAP -DHAVE_STRLCPY -DHAVE_PRCTL -DHAVE_MEMSET16 -DHAVE_MEMSET32 -DANDROID_SMP=0
+endif
+
+
+$(warning ################# rock ROOT: $(ROOT),includedir:$(includedir),)
+
+LOCAL_PATH = .
+
+LOCAL_C_INCLUDES = \
+ -I. \
+ -I$(LOCAL_PATH)/include \
+ -I$(ROOT)$(includedir)/logger \
+ -I$(ROOT)$(includedir)/liblog \
+ -I$(ROOT)$(includedir)/glib-2.0 \
+ -I$(ROOT)$(libdir)/glib-2.0/include \
+ -I$(ROOT)$(includedir) \
+
+
+
+LOCAL_LIBS := \
+ -L. \
+ -ldl \
+ -lstdc++ \
+ -llynq-log \
+ -lsctel \
+
+
+SOURCES = $(wildcard *.cpp)
+
+EXECUTABLE = libpoweralarm.so
+
+OBJECTS=$(SOURCES:.cpp=.o)
+
+
+.PHONY: build clean install pack_rootfs
+
+all: build
+$(EXECUTABLE): $(OBJECTS)
+ $(CXX) -shared -Wl,--no-undefined $(OBJECTS) $(LOCAL_LIBS) $(LOCAL_CFLAGS) $(LOCAL_C_INCLUDES) -o $@
+
+%.o : %.cpp
+ $(CXX) $(LOCAL_C_INCLUDES) $(LOCAL_CFLAGS) $(LOCAL_LIBS) -o $@ -c $<
+
+build: $(EXECUTABLE)
+ $(warning ########## build $(EXECUTABLE) ##########)
+
+install:
+ mkdir -p $(ROOT)$(base_libdir)/
+ install $(EXECUTABLE) $(ROOT)$(base_libdir)/
+ mkdir -p $(ROOT)$(includedir)/$(NAME)/sdk
+
+pack_rootfs:
+ mkdir -p $(PACK_INITRAMFS_TO)$(base_libdir)/
+ cp -af $(EXECUTABLE) $(PACK_INITRAMFS_TO)$(base_libdir)/
+ $(CROSS)strip $(PACK_INITRAMFS_TO)$(base_libdir)/$(EXECUTABLE)
+ mkdir -p $(PACK_TO)$(base_libdir)/
+ cp -af $(EXECUTABLE) $(PACK_TO)$(base_libdir)/
+ $(CROSS)strip $(PACK_TO)$(base_libdir)/$(EXECUTABLE)
+.PHONY: clean
+clean:
+ $(RM) $(OBJECTS) $(EXECUTABLE)
+
diff --git a/cap/zx297520v3/src/lynq/packages/apps/lynq-systime-demo/lynq_systime_demo.cpp b/cap/zx297520v3/src/lynq/packages/apps/lynq-systime-demo/lynq_systime_demo.cpp
new file mode 100755
index 0000000..d0fffcf
--- /dev/null
+++ b/cap/zx297520v3/src/lynq/packages/apps/lynq-systime-demo/lynq_systime_demo.cpp
@@ -0,0 +1,252 @@
+/**@File lynq-systime-demo.cpp
+ *
+ * @Brief As a example for liblynq-systime.
+ *
+ * @Author sj.zhang
+ *
+ * @Date 2023-08-15
+ *
+ * @Version V1.0
+ *
+ * @copyright Copyright (c) MobileTek
+ */
+#include <stdio.h>
+#include <dlfcn.h>
+#include <string.h>
+#include <stdlib.h>
+#include <time.h>
+
+typedef struct time_source_status
+{
+ int ntp;
+ int nitz;
+ int gnss;
+} time_src_status_s;
+
+#ifdef MOBILETEK_TARGET_PLATFORM_T106
+int (*lynq_sync_time_from_rtc)(void);
+int (*lynq_set_rtc_time)(void);
+int (*lynq_get_rtc_time)(unsigned long *ulsec);
+
+#endif
+void *dlHandle_systime = NULL;
+int (*modem_time_enable)(int enable);
+int (*gnss_time_enable)(int enable);
+int (*ntp_sync_time)(int enable);
+int (*user_set_time)(char *date, char *time);
+int (*lynq_get_time_src_status)(time_src_status_s *time_src);
+
+int lynq_ntp_sync_demo(int argc, char *argv[])
+{
+ int ret = -1;
+ if (argc != 3)
+ {
+ printf("Parameter number wrong !\n");
+ dlclose(dlHandle_systime);
+ return -1;
+ }
+ ntp_sync_time = (int (*)(int enable))dlsym(dlHandle_systime, "ntp_sync_time");
+ if (NULL == ntp_sync_time)
+ {
+ fprintf(stderr, "Failed to dlsym function ntp_sync_time : %s\n", dlerror());
+ dlclose(dlHandle_systime);
+ return -1;
+ }
+ ret = ntp_sync_time(atoi(argv[2]));
+ switch (ret)
+ {
+ case 0:
+ printf("set success!\n");
+ break;
+ case 1:
+ printf("NTP_ALREADY_ENABLE!\n");
+ break;
+ case 2:
+ printf("NTP_ALREADY_DISENABLE!\n");
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+int lynq_modem_sync_demo(int argc, char *argv[])
+{
+ int ret = -1;
+ if (argc != 3)
+ {
+ printf("Parameter number wrong !\n");
+ dlclose(dlHandle_systime);
+ return -1;
+ }
+ modem_time_enable = (int (*)(int enable))dlsym(dlHandle_systime, "modem_time_enable");
+ if (NULL == modem_time_enable)
+ {
+ fprintf(stderr, "Failed to dlsym function modem_time_enable: %s\n", dlerror());
+ dlclose(dlHandle_systime);
+ return -1;
+ }
+ ret = modem_time_enable(atoi(argv[2]));
+ printf("ret = %d\n", ret);
+ if (ret != 0 && ret != 4)
+ {
+ printf("modem_time_enable failed !\n");
+ dlclose(dlHandle_systime);
+ return -1;
+ }
+ return 0;
+}
+
+int lynq_gnss_sync_demo(int argc, char *argv[])
+{
+ int ret = -1;
+ if (argc != 3)
+ {
+ printf("Parameter number wrong !\n");
+ dlclose(dlHandle_systime);
+ return -1;
+ }
+ gnss_time_enable = (int (*)(int enable))dlsym(dlHandle_systime, "gnss_time_enable");
+ if (NULL == gnss_time_enable)
+ {
+ fprintf(stderr, "Failed to dlsym function gnss_time_enable: %s\n", dlerror());
+ dlclose(dlHandle_systime);
+ return -1;
+ }
+ ret = gnss_time_enable(atoi(argv[2]));
+ printf("ret = %d\n", ret);
+ if (ret != 0 && ret != 4)
+ {
+ printf("gnss_time_enable failed !\n");
+ dlclose(dlHandle_systime);
+ return -1;
+ }
+ return ret;
+}
+
+int lynq_user_set_time_demo(int argc, char *argv[])
+{
+ int ret = -1;
+ if (argc != 4)
+ {
+ printf("Parameter number wrong !\n");
+ dlclose(dlHandle_systime);
+ return -1;
+ }
+ user_set_time = (int (*)(char *date, char *time))dlsym(dlHandle_systime, "user_set_time");
+ if (NULL == user_set_time)
+ {
+ fprintf(stderr, "Failed to dlsym function user_set_time: %s\n", dlerror());
+ dlclose(dlHandle_systime);
+ return -1;
+ }
+ ret = user_set_time(argv[2], argv[3]);
+ return ret;
+}
+
+int lynq_get_time_src_status_demo(int arg_c, char *arg_v[])
+{
+ lynq_get_time_src_status = (int (*)(time_src_status_s *time_src))dlsym(dlHandle_systime, "lynq_get_time_src_status");
+ if (NULL == lynq_get_time_src_status)
+ {
+ fprintf(stderr, "Failed to dlsym function lynq_get_time_src_status : %s\n", dlerror());
+ dlclose(dlHandle_systime);
+ return -1;
+ }
+ time_src_status_s time_src = {0};
+ lynq_get_time_src_status(&time_src);
+ printf("time source status are :\nntp=%d\nnitz=%d\ngnss=%d\n", time_src.ntp, time_src.nitz, time_src.gnss);
+ return 0;
+}
+
+int main(int argc, char *argv[])
+{
+ int ret = -1;
+ char *cmd = argv[1];
+ printf("enter lynq_systime_demo \n");
+ dlHandle_systime = dlopen("/lib/liblynq-systime.so", RTLD_NOW);
+ if (!dlHandle_systime)
+ {
+ fprintf(stderr, "Failed to load library: %s\n", dlerror());
+ return 1;
+ }
+
+ if (cmd == NULL)
+ {
+ printf("No command received!\n");
+ dlclose(dlHandle_systime);
+ return 1;
+ }
+ else if (strcmp(cmd, "ntp") == 0)
+ {
+ ret = lynq_ntp_sync_demo(argc, argv);
+ }
+ else if (strcmp(cmd, "nitz") == 0)
+ {
+ ret = lynq_modem_sync_demo(argc, argv);
+ }
+ else if (strcmp(cmd, "gnss") == 0)
+ {
+ ret = lynq_gnss_sync_demo(argc, argv);
+ }
+ else if (strcmp(cmd, "user") == 0)
+ {
+ ret = lynq_user_set_time_demo(argc, argv);
+ }
+#ifdef MOBILETEK_TARGET_PLATFORM_T106
+ else if (strcmp(cmd, "sync_rtc") == 0)
+ {
+ lynq_sync_time_from_rtc = (int (*)(void))dlsym(dlHandle_systime, "lynq_sync_time_from_rtc");
+ if (NULL == lynq_sync_time_from_rtc)
+ {
+ fprintf(stderr, "Failed to dlsym function lynq_sync_time_from_rtc : %s\n", dlerror());
+ dlclose(dlHandle_systime);
+ return -1;
+ }
+ ret = lynq_sync_time_from_rtc();
+ }
+ else if (strcmp(cmd, "rtc_set") == 0)
+ {
+ lynq_set_rtc_time = (int (*)(void))dlsym(dlHandle_systime, "lynq_set_rtc_time");
+ if (NULL == lynq_set_rtc_time)
+ {
+ fprintf(stderr, "Failed to dlsym function lynq_set_rtc_time : %s\n", dlerror());
+ dlclose(dlHandle_systime);
+ return -1;
+ }
+ ret = lynq_set_rtc_time();
+ }
+ else if (strcmp(cmd, "rtc_get") == 0)
+ {
+ lynq_get_rtc_time = (int (*)(unsigned long *ulsec))dlsym(dlHandle_systime, "lynq_get_rtc_time");
+ if (NULL == lynq_get_rtc_time)
+ {
+ fprintf(stderr, "Failed to dlsym function lynq_get_rtc_time : %s\n", dlerror());
+ dlclose(dlHandle_systime);
+ return -1;
+ }
+ unsigned long time_ret;
+ ret = lynq_get_rtc_time(&time_ret);
+ time_t tp = (time_t)time_ret;
+ char *rtc_time = ctime(&tp);
+ printf("rtc_time seconds = %lu\n", time_ret);
+ printf("rtc time = %s\n", rtc_time);
+ }
+#endif
+ else if (strcmp(cmd, "src_status") == 0)
+ {
+ ret = lynq_get_time_src_status_demo(argc, argv);
+ }
+ else
+ {
+ printf("command wrong !\n");
+ dlclose(dlHandle_systime);
+ return -1;
+ }
+ if (0 != ret)
+ {
+ printf("ret = %d\n Command execution failure.\n", ret);
+ }
+ dlclose(dlHandle_systime);
+ return ret;
+}
diff --git a/cap/zx297520v3/src/lynq/packages/apps/lynq-systime-demo/makefile b/cap/zx297520v3/src/lynq/packages/apps/lynq-systime-demo/makefile
new file mode 100755
index 0000000..890f85a
--- /dev/null
+++ b/cap/zx297520v3/src/lynq/packages/apps/lynq-systime-demo/makefile
@@ -0,0 +1,58 @@
+SHELL = /bin/sh
+RM = rm -f
+
+LOCAL_CFLAGS := -Wall \
+ -std=gnu++14 \
+ -g -Os \
+ -flto \
+ -fpermissive \
+
+ifeq ($(strip $(TARGET_PLATFORM)), T106)
+LOCAL_CFLAGS += -DBINDER_IPC_32BIT=1 -DHAVE_ENDIAN_H -DHAVE_PTHREADS -DHAVE_SYS_UIO_H -DHAVE_POSIX_FILEMAP -DHAVE_STRLCPY -DHAVE_PRCTL -DHAVE_MEMSET16 -DHAVE_MEMSET32 -DANDROID_SMP=0
+endif
+
+ifeq ($(strip $(TARGET_PLATFORM)), T106)
+LOCAL_CFLAGS += -DMOBILETEK_TARGET_PLATFORM_T106
+endif
+
+LOCAL_CFLAGS += -Wno-error=format-security
+
+LOCAL_PATH = .
+
+LOCAL_C_INCLUDES = \
+ -I. \
+ -I$(LOCAL_PATH)/include/ \
+ -I$(ROOT)$(includedir)/ \
+ -I$(ROOT)$(includedir)/include/ \
+
+
+
+LOCAL_LIBS := \
+ -L. \
+ -ldl \
+ -lstdc++ \
+ -lpthread \
+ -llynq-systime \
+
+
+
+SOURCES = lynq_systime_demo.cpp
+
+EXECUTABLE = lynq-systime-demo
+
+OBJECTS=$(SOURCES:.cpp=.o)
+
+OBJECTS_TOOL=$(SOURCES_TOOL:.cpp=.o)
+all: $(EXECUTABLE)
+
+$(EXECUTABLE): $(OBJECTS)
+ $(CXX) $(OBJECTS) $(LOCAL_LIBS) $(LOCAL_CFLAGS) $(LOCAL_C_INCLUDES) -o $@
+
+%.o : %.cpp
+ $(CXX) $(LOCAL_C_INCLUDES) $(LOCAL_CFLAGS) $(LOCAL_LIBS) -o $@ -c $<
+
+.PHONY: clean
+clean:
+ $(RM) $(OBJECTS) $(EXECUTABLE)
+ $(RM) $(OBJECTS_TOOL) $(EXECUTABLE)
+
diff --git a/cap/zx297520v3/zxic_code/zxic_source/zxic_app_open/platform/at_ctl/src/atconfig/ps_normal.c b/cap/zx297520v3/zxic_code/zxic_source/zxic_app_open/platform/at_ctl/src/atconfig/ps_normal.c
index f7becaa..caac23e 100755
--- a/cap/zx297520v3/zxic_code/zxic_source/zxic_app_open/platform/at_ctl/src/atconfig/ps_normal.c
+++ b/cap/zx297520v3/zxic_code/zxic_source/zxic_app_open/platform/at_ctl/src/atconfig/ps_normal.c
@@ -115,6 +115,14 @@
void *p[5] = {&timeinfo.time_zone,&timeinfo.sav_time,temp1,temp2,timeinfo.univer_time};
int time_zone = 0;
+ //>>>sj.zhang add @2023-08-10 for systime NITZ sync enable/disenable.
+ if(0 != system("uci get lynq_uci.lynq_sync_time.lynq_modem_sync_time_enable | grep -E \'^1$\'"))
+ {
+ at_print(AT_ERR,"zmmi_auto_act: nitz disenabled. \n");
+ return AT_END;
+ }
+ //>>>sj.zhang add @2023-08-10 end.
+
sc_cfg_get("sntp_time_set_mode", mode, sizeof(mode));
if(strcmp(mode, "manual") == 0)
{
diff --git a/esdk_patch/linux_bb.diff b/esdk_patch/linux_bb.diff
index b4bc4f9..d68aeb5 100644
--- a/esdk_patch/linux_bb.diff
+++ b/esdk_patch/linux_bb.diff
@@ -1,20 +1,19 @@
diff --git a/linux-zxic_5.10.bb b/linux-zxic_5.10.bb
-old mode 100644
-new mode 100755
-index 29942f4..4b10e1c
+index abadd9b..a8c7f65 100755
--- a/linux-zxic_5.10.bb
+++ b/linux-zxic_5.10.bb
-@@ -4,15 +4,15 @@ PV = "${LINUX_VERSION}"
+@@ -4,16 +4,16 @@ PV = "${LINUX_VERSION}"
LICENSE = "GPLv2"
LIC_FILES_CHKSUM ?= "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
LINUX_VERSION ?= "5.10.156"
-
-+BSPDIR = "${TOPDIR}/../upstream/"
++BSPDIR = "${TOPDIR}/../upstream"
#pub include
-include ${BSPDIR}/sources/meta-zxic/conf/pub.inc
+include ${TOPDIR}/layers/meta-zxic/conf/pub_esdk.inc
DEPENDS += "kern-tools-native"
+ DEPENDS += "${@bb.utils.contains('DISTRO_FEATURES','dm-verity','zstd-native','',d)}"
inherit kernel siteinfo
EXTRA_OEMAKE_append = " LOADADDR=${KERNEL_LOADADDR} EXTRA_CFLAGS='${ZXIC_EXTRA_CFLAGS}' "
@@ -23,3 +22,11 @@
# PR_CONFIG_cpe = "linux-5_10-cpe-${BOOT_CTL}-defconfig"
# PR_CONFIG_v2x = "linux-5_10-v2x-${BOOT_CTL}-defconfig"
PR_CONFIG_vehicle_dc = "linux-5_10-vehicle_dc-${BOOT_CTL}-defconfig"
+@@ -61,7 +61,7 @@ kernel_do_configure() {
+
+ fakeroot do_cpio () {
+ if ${@bb.utils.contains('DISTRO_FEATURES','dm-verity','true','false',d)}; then
+- cp -v ${BSPDIR}/sources/meta-zxic-custom/conf/distro/dm-verity/${KERNEL_INITRAMFS_CPIO} ${B}/
++ cp -v ${BSPDIR}/../esdk/sources/meta-zxic-custom/conf/distro/dm-verity/${KERNEL_INITRAMFS_CPIO} ${B}/
+ fi
+ }
diff --git a/esdk_patch/mk_esdk.sh b/esdk_patch/mk_esdk.sh
index 5037d76..75a112e 100755
--- a/esdk_patch/mk_esdk.sh
+++ b/esdk_patch/mk_esdk.sh
@@ -3,7 +3,7 @@
dest_dir_relative=$1
intall_dir=$(pwd)
-chmod a+x ./vehicle_dc-glibc-x86_64-zxic-image-armv7a-zx297520v3-toolchain-ext-1.0.sh
+chmod a+x ./vehicle_dc_ref-glibc-x86_64-zxic-image-armv7a-zx297520v3-toolchain-ext-1.0.sh
mkdir ${dest_dir_relative}
cd $1
dest_dir=$(pwd)
@@ -12,7 +12,7 @@
echo "Input invaild path for folders to install\n"
exit 1
fi
-./vehicle_dc-glibc-x86_64-zxic-image-armv7a-zx297520v3-toolchain-ext-1.0.sh -d ${dest_dir}/esdk
+./vehicle_dc_ref-glibc-x86_64-zxic-image-armv7a-zx297520v3-toolchain-ext-1.0.sh -d ${dest_dir}/esdk
tar -zxvf upstream.tar.gz -C $dest_dir
ln -s ${dest_dir}/upstream/tools ${dest_dir}/esdk
cp linux_bb.diff ${dest_dir}/esdk/layers/meta-zxic/recipes-kernel/linux/