blob: d0dc5a7c51a68fef3b647de11c1cd4988fe7eca6 [file] [log] [blame]
/*
* (C) Copyright 2016, ZIXC Corporation.
*
*/
#ifndef __ZX234290_H__
#define __ZX234290_H__
#include <drvs_gpio.h>
//#define PS_HOLD_PIN GPIO51
#define ZX234290_I2C_SLAVE_ADDR 0x12
#define ZX234296_REG_PWRKEY_CTRL2 0x43
#define ZX234290_REG_ADDR_STSA 0x04
#define INTR_A 0x0
#define INTR_B 0x1
#define INTR_MASK_A 0x2
#define INTR_EOADC (0x1 << 2)
#define INTR_PWR_ON_SHORT_PRESS (0x1 << 3)
#define INTR_PWR_ON_LONG_PRESS (0x1 << 4)
#define INTR_PWR_ON (0x1 << 5)
#define INTR_MASK_B 0x3
#define STATUS_A 0x4
#define STATUS_EOADC (0x1 << 2)
#define STATUS_PWR_ON (0x1 << 5)
#define STATUS_B 0x5
#define STATUS_RTC_ALARM (0x1 << 0)
#define START_UP_STATUS 0x6
#define PWR_ON_START_UP (0x1 << 0)
#define RTC_ALARM_START_UP (0x1 << 1)
#define PS_HOLD_START_UP (0x1 << 2)
#define LLP_RESTART_UP (0x1 << 3)
#define SYS_CONTROL 0x7
//#define SINK1_ENABLE (0x1 << 0)
//#define SINK2_ENABLE (0x1 << 1)
#define ADC1_ENABLE (0x1 << 3)
#define ADC2_ENABLE (0x1 << 4)
#define BUCK_MODE_CONTROL0 0xe
#define BUCK_MODE_CONTROL1 0xf
#define MMC_CTRL 0x15
#define ZX234290_REG_ADDR_LDO78_VOL 0x15
#define ZX234290_REG_ADDR_LDO78_SLPVOL 0x1B
#define ZX234290_LDO8_VSEL_LSH (4)
#define ZX234290_LDO8_SLP_VSEL_LSH (4)
#define ZX234290_REG_LDO_EN1 0x21 /* LDO8-1 */
#define ZX234290_REG_ADC_ADC2MSB 0x27 /* CHANNEL 2 */
#define ZX234290_REG_ADC_ADC2LSB 0x28
#define ZX234290_REG_ADC_ADC1MSB 0x25 /* CHANNEL 2 */
#define ZX234290_REG_ADC_ADC1LSB 0x26
#define ZX234290_REG_ADC_VBATMSB 0x23 /* CHANNEL 2 */
#define ZX234290_REG_ADC_VBATLSB 0x24
#define ZX234297_REG_ADDR_SINK_CONTROL 0X29
#define ZX234290_REG_RTC_CONTROL2 0x31
/*RTC ALARM Enable*/
#define ZX234290_REG_ADDR_ALARM_MINUTE 0x39
#define ZX234290_REG_ADDR_ALARM_HOUR 0x3A
#define ZX234290_REG_ADDR_ALARM_DAY 0x3B
#define ZX234290_REG_ADDR_ALARM_WEEK 0x3C
#define ZX234290_REG_ADDR_ALARM_SECOND 0x3D
#define ZX234290_RTC_AlARM_ACTIVATED_LSH (7)
#define RTC_CONTROL2_TIE (1 << 0)
#define RTC_CONTROL2_AIE (1 << 1)
#define RTC_CONTROL2_TF (1 << 2)
#define RTC_CONTROL2_AF (1 << 3)
#define ZX234290_REG_USER 0x50
/*define reset flag*/
#define ZX234290_USER_RST_FLAG (0x0<<4)/*0x00*/
#define ZX234290_WDT_RST_FLAG (0x1<<4)/*0x10*/
#define ZX234290_USER_RST_UNDEFINE (0x0<<0)/*0x0*/
#define ZX234290_USER_RST_TO_NORMAL (0x1<<0)/*0x1*/
#define ZX234290_USER_RST_TO_CHARGER (0x2<<0)/*0x2*/
#define ZX234290_USER_RST_TO_ALARM (0x3<<0)/*0x3*/
#define ZX234290_USER_RST_TO_EXCEPT (0x4<<0)/*0x4*/
#define ZX234290_REG_INTA 0x00 /* INTERRUPT */
#define ZX234290_REG_INTB 0x01
#define ZX234290_REG_SYS_CTRL 0x07
/* sink control */
#define ZX234297_REG_ADDR_SINK_CONTROL 0x29
#define ZX234290_REG_ADDR_LDO_EN2 0x22 /* [xx xx]BUCK4-1, [0xx0]LDO10-9*/
/* 0x22 */
#define ZX234297_SINK1_ON_LSH (2)
#define ZX234297_SINK2_ON_LSH (3)
#define ZX234297_SINK_ON_WID (1)
/* 0x29 */
#define ZX234297_SINK1_CURRENT_LSH (0)
#define ZX234297_SINK2_CURRENT_LSH (4)
#define ZX234297_SINK_CURRENT_WID (4)
typedef enum _T_ZX234290_SINK
{
SINK_1 = 0,
SINK_2 = 1,
SINK_MAX
}T_ZX234290_SINK;
typedef enum _T_ZX234290_SINK_CURRENT
{
SINK_CURRENT_5MA,
SINK_CURRENT_10MA,
SINK_CURRENT_15MA,
SINK_CURRENT_20MA,
SINK_CURRENT_30MA,
SINK_CURRENT_40MA,
SINK_CURRENT_50MA,
SINK_CURRENT_60MA,
SINK_CURRENT_70MA,
SINK_CURRENT_80MA,
SINK_CURRENT_90MA,
SINK_CURRENT_100MA,
SINK_CURRENT_110MA,
SINK_CURRENT_120MA,
SINK_CURRENT_MAX
}T_ZX234297_SINK_CURRENT;
typedef enum _T_ZDrvZx234290_VldoD
{
VLDOD_1_400 = 0,
VLDOD_1_500 = 1,
VLDOD_1_600 = 2,
VLDOD_1_800 = 3,
VLDOD_1_850 = 4,
VLDOD_2_000 = 5,
VLDOD_2_050 = 6,
VLDOD_2_500 = 7,
VLDOD_2_550 = 8,
VLDOD_2_700 = 9,
VLDOD_2_750 = 10,
VLDOD_2_800 = 11,
VLDOD_2_850 = 12,
VLDOD_2_900 = 13,
VLDOD_2_950 = 14,
VLDOD_3_000 = 15,
VLDOD_MAX
}T_ZDrvZx234290_VldoD;
/* pwr_on long pressed time */
#define ZX234290_REG_ADDR_PWRON 0x42
int zx234290_reset_flag(void);
int zx234290_write_flag(UINT8 val);
int pmu_pull_off_ps_hold(void);
int pmu_pull_on_ps_hold(void);
/*get the poweron key state 1: poweron press 0:poweron up*/
int zx234290_get_poweron_state(void);
int zx234290_get_rtc_state(void);
int zx234290_get_adc1_voltage(void);
int zx234290_get_adc2_voltage(void);
int zx234290_get_vbat_voltage(void);
int zx234290_set_softon(int on);
int zx234290_ldo8_enable(int enable);
int zx234290_set_sink(T_ZX234290_SINK sink_num, int is_on, T_ZX234297_SINK_CURRENT sink_current);
#endif /* __ZX234290_H__ */