[Feature][ZXW-39] add fota upgrade api code
Change-Id: I151f8568cd28a47196a43d676231aedecbd702f5
diff --git a/cap/zx297520v3/src/lynq/lib/liblynq-qser-fota/LICENSE b/cap/zx297520v3/src/lynq/lib/liblynq-qser-fota/LICENSE
new file mode 100755
index 0000000..605b7ea
--- /dev/null
+++ b/cap/zx297520v3/src/lynq/lib/liblynq-qser-fota/LICENSE
@@ -0,0 +1,31 @@
+Copyright Statement:
+
+This software/firmware and related documentation ("MobileTek Software") are
+protected under relevant copyright laws. The information contained herein is
+confidential and proprietary to MobileTek Inc. and/or its licensors. Without
+the prior written permission of MobileTek inc. and/or its licensors, any
+reproduction, modification, use or disclosure of MobileTek Software, and
+information contained herein, in whole or in part, shall be strictly
+prohibited.
+
+MobileTek Inc. (C) 2015. All rights reserved.
+
+BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MobileTek SOFTWARE")
+RECEIVED FROM MobileTek AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER
+ON AN "AS-IS" BASIS ONLY. MobileTek EXPRESSLY DISCLAIMS ANY AND ALL
+WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
+WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
+NONINFRINGEMENT. NEITHER DOES MobileTek PROVIDE ANY WARRANTY WHATSOEVER WITH
+RESPECT TO THE SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY,
+INCORPORATED IN, OR SUPPLIED WITH THE MobileTek SOFTWARE, AND RECEIVER AGREES
+TO LOOK ONLY TO SUCH THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO.
+RECEIVER EXPRESSLY ACKNOWLEDGES THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO
+OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES CONTAINED IN MobileTek
+SOFTWARE. MobileTek SHALL ALSO NOT BE RESPONSIBLE FOR ANY MobileTek SOFTWARE
+RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
+STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MobileTek'S
+ENTIRE AND CUMULATIVE LIABILITY WITH RESPECT TO THE MobileTek SOFTWARE
+RELEASED HEREUNDER WILL BE, AT MobileTek'S OPTION, TO REVISE OR REPLACE THE
+MobileTek SOFTWARE AT ISSUE, OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE
+CHARGE PAID BY RECEIVER TO MobileTek FOR SUCH MobileTek SOFTWARE AT ISSUE.
diff --git a/cap/zx297520v3/src/lynq/lib/liblynq-qser-fota/include/lynq-qser-fota.h b/cap/zx297520v3/src/lynq/lib/liblynq-qser-fota/include/lynq-qser-fota.h
new file mode 100755
index 0000000..34be9aa
--- /dev/null
+++ b/cap/zx297520v3/src/lynq/lib/liblynq-qser-fota/include/lynq-qser-fota.h
@@ -0,0 +1,26 @@
+/*******************************************************
+*
+* @brief:
+* @details: add fota upgrade api
+* @author: l.yang
+* @date: 2023.8.3
+* @version: V1.0
+* @copyright：Copyright (c) MobileTek
+*
+*********************************************/
+#ifndef LYNQ_QSER_FOTA
+#define LYNQ_QSER_FOTA
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+int lynq_get_upgrade_status(void);
+int lynq_fota_set_addr_value(char *value,int size);
+int lynq_fota_nrestart(void);
+int lynq_rock_main(int first_run);
+
+#ifdef __cplusplus
+}
+#endif
+#endif
+
diff --git a/cap/zx297520v3/src/lynq/lib/liblynq-qser-fota/lynq-qser-fota.cpp b/cap/zx297520v3/src/lynq/lib/liblynq-qser-fota/lynq-qser-fota.cpp
new file mode 100755
index 0000000..735f350
--- /dev/null
+++ b/cap/zx297520v3/src/lynq/lib/liblynq-qser-fota/lynq-qser-fota.cpp
@@ -0,0 +1,739 @@
+/*******************************************************
+*
+* @brief:
+* @details: add fota upgrade api
+* @author: l.yang
+* @date: 2023.8.3
+* @version: V1.0
+* @copyright：Copyright (c) MobileTek
+*
+*********************************************/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include <errno.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <sys/ioctl.h>
+#include <dirent.h>
+#include <getopt.h>
+#include <unistd.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "include/lynq-qser-fota.h"
+#include "liblog/lynq_deflog.h"
+
+
+#define USER_LOG_TAG "LYNQ_FOTA"
+
+
+#define SYSTEM_A "34650"
+#define SYSTEM_B "39019"
+
+char path[] = {0};
+
+#define BOOTABLE "45227"
+#define UNBOOTABLE "47806"
+
+
+typedef struct
+{
+ int system;
+ int status;
+ int try_cnt;
+} z_system_info_t;
+
+typedef struct
+{
+ int upgrade_status;
+ int total_size;
+ int upgraded_size;
+} z_upgrade_status_info_t;
+
+typedef struct
+{
+ int boot_to;
+ int fota_status;
+ z_system_info_t system_1;
+ z_system_info_t system_2;
+} z_upgrade_system_info_t;
+
+typedef struct
+{
+ z_upgrade_status_info_t *status;
+ void(* status_cb)(z_upgrade_status_info_t *status);
+} z_upgrade_flush_status_t;
+
+extern int zxic_dual_verify();
+extern int zxic_dual_upgrade(z_upgrade_flush_status_t *flush_status);
+extern int zxic_dual_get_upgrade_status(z_upgrade_status_info_t *upgrade_info);
+extern int zxic_dual_get_current_system();
+extern int zxic_dual_get_boot_to_system();
+extern int zxic_dual_set_boot_to_system(int system, int reboot_flag);
+extern int zxic_dual_get_system_status(z_upgrade_system_info_t *system_info);
+extern int zxic_dual_set_system_status(int system, int status);
+extern int zxic_dual_get_fota_status_for_nv();
+extern int zxic_dual_set_fota_status_for_nv(int status);
+extern int zxic_dual_sync_system(void);
+extern int zxic_dual_get_upgrade_type(void);
+extern void zxic_dual_get_sync_status(int *sync_status);
+extern int zxic_dual_set_sync_status(int sync_status);
+extern int zxic_dual_config_package_path(char *upgrade_package_path, int length);
+
+int lynq_fota_verify();
+int lynq_fota_upgrade();
+int lynq_get_current_system();
+int lynq_get_boot_to_system();
+int lynq_set_boot_to_system(char *option_para);
+int lynq_set_system_a_status(char *option_para);
+int lynq_set_system_b_status(char *option_para);
+int lynq_sync_system();
+int lynq_get_upgrade_type();
+int lynq_get_sync_status();
+int lynq_set_sync_status(char *option_para);
+
+
+/*****************************************
+* @brief:rock_update_main
+* @param count [IN]:NA
+* @param sum [OUT]:NA
+* @return :success 0, failed -1
+* @todo:NA
+* @see:NA
+* @warning:NA
+******************************************/
+int rock_update_main(int reboot_flag)
+{
+
+ int ret = 0;
+ int current_slot = 0;
+
+ ret = lynq_fota_verify();
+ if(ret != 0)
+ {
+ LYINFLOG("Verify package failed exit upgrade");
+ return -1;
+ }
+
+
+ LYINFLOG("-----Begin to upgrade ----");
+ ret = lynq_fota_upgrade();
+ if(ret != 0)
+ {
+ LYINFLOG("Fota upgrade failed!!!");
+ return -1;
+ }
+
+ ret = lynq_get_upgrade_status();
+ if(ret != 0)
+ {
+ LYINFLOG("Upgrade failed ");
+ return -1;
+ }
+
+ current_slot = lynq_get_current_system();
+ if(current_slot < 0)
+ {
+ LYINFLOG("Get current system failed");
+ return -1;
+ }
+
+
+ if(current_slot == atoi(SYSTEM_A))
+ {
+ LYINFLOG("current system is system a");
+
+
+ ret = lynq_set_boot_to_system((char *)SYSTEM_B);
+ if(ret != 0)
+ {
+ LYINFLOG("set system B boot failed ");
+ return -1;
+ }
+
+
+ ret = lynq_set_system_a_status((char *)UNBOOTABLE);
+ if(ret < 0)
+ {
+ LYINFLOG("Set system A status to [%s] error ", UNBOOTABLE);
+ return -1;
+ }
+
+ ret = lynq_set_system_b_status((char *)BOOTABLE);
+ if(ret < 0)
+ {
+ LYINFLOG("Set system B status to [%s] error ", BOOTABLE);
+ return -1;
+ }
+
+ }
+ else if( current_slot == atoi(SYSTEM_B))
+ {
+ LYINFLOG("current system is system a");
+
+
+ ret = lynq_set_boot_to_system((char *)SYSTEM_A);
+ if(ret != 0)
+ {
+ LYINFLOG("set system B boot failed ");
+ return -1;
+ }
+
+
+ ret = lynq_set_system_b_status((char *)UNBOOTABLE);
+ if(ret < 0)
+ {
+ LYINFLOG("Set system B status to [%s] error ", UNBOOTABLE);
+ return -1;
+ }
+
+ ret = lynq_set_system_a_status((char *)BOOTABLE);
+ if(ret < 0)
+ {
+ LYINFLOG("Set system A status to [%s] error ", BOOTABLE);
+ return -1;
+ }
+
+ }
+
+ if(reboot_flag == 1)
+ {
+ LYINFLOG("Enter reboot device");
+ system("reboot");
+ }
+
+ return 0;
+}
+
+/*****************************************
+* @brief:upgrade callback function
+* @param count [IN]:z_upgrade_status_info_t *p_status
+* @param sum [OUT]:NA
+* @return :NA
+* @todo:
+* @see:NA
+* @warning:NA
+******************************************/
+void lynq_g_flush_upgrade_status(z_upgrade_status_info_t *p_status)
+{
+
+ LYINFLOG("Current status:%d ", p_status->upgrade_status);
+
+ LYINFLOG("Total size:%d ", p_status->total_size);
+
+ LYINFLOG("Updated size:%d ", p_status->upgraded_size);
+ return ;
+}
+
+/*****************************************
+* @brief:lynq_fota_set_addr_value
+* @param count [IN]:char *path
+* @param sum [OUT]:
+* @return :success 0, failed -1
+* @todo:NA
+* @see:NA
+* @warning:NA
+******************************************/
+int lynq_fota_set_addr_value(char *value,int size)
+{
+ int ret =0;
+
+ LYLOGSET(LOG_INFO);
+ LYLOGEINIT(USER_LOG_TAG);
+
+ if (NULL == value || size <= 0)
+ {
+ LYINFLOG("Bad package path!!!");
+ return -1;
+ }
+ ret = zxic_dual_config_package_path(value, strlen(value));
+ if(ret == -1)
+ {
+ LYINFLOG("Configure upgrade package path fail");
+ return -1;
+ }
+
+ LYINFLOG("Configure upgrade package path success");
+ return 0;
+}
+
+
+/*****************************************
+* @brief:lynq_fota_verify
+* @param count [IN]:NA
+* @param sum [OUT]:NA
+* @return :success 0, failed -1
+* @todo:NA
+* @see:NA
+* @warning:NA
+******************************************/
+int lynq_fota_verify()
+{
+ int ret = 0;
+
+ LYINFLOG("-----Begin to verify upgrade package----");
+ ret = zxic_dual_verify();
+ if(ret != 0)
+ {
+ LYINFLOG("Verify upgrade package failed");
+ return -1;
+ }
+
+ return 0;
+
+}
+
+/*****************************************
+* @brief:upgrade function
+* @param count [IN]:NA
+* @param sum [OUT]:NA
+* @return :success 0, failed -1
+* @todo:NA
+* @see:NA
+* @warning:NA
+******************************************/
+int lynq_fota_upgrade()
+{
+ int ret = 0;
+ z_upgrade_flush_status_t flush_status;
+ z_upgrade_status_info_t status;
+ memset(&status, 0, sizeof(z_upgrade_status_info_t));
+ flush_status.status = &status;
+ flush_status.status_cb = &lynq_g_flush_upgrade_status;
+
+
+ LYINFLOG("Enter lynq_fota_upgrade !!!!");
+ ret = zxic_dual_upgrade(&flush_status);
+ if(ret != 0)
+ {
+ LYINFLOG("Fota upgrade failed!!!");
+ return -1;
+ }
+ return 0;
+}
+
+/*****************************************
+* @brief:lynq_fota_nrestart no reboot
+* @param count [IN]:NA
+* @param sum [OUT]:NA
+* @return :success 0, failed -1
+* @todo:NA
+* @see:NA
+* @warning:NA
+******************************************/
+int lynq_fota_nrestart(void)
+{
+ int ret = 0;
+ ret = rock_update_main(0);
+ if(ret != 0)
+ {
+ LYINFLOG("Upgrade failed !!!!");
+ return -1;
+ }
+ else
+ {
+ LYINFLOG("upgrade success!!!");
+ }
+ return 0;
+}
+
+/*****************************************
+* @brief:lynq_rock_main,upgrade done reboot
+* @param count [IN]:int first_run
+* @param sum [OUT]:NA
+* @return :success 0, failed -1
+* @todo:NA
+* @see:NA
+* @warning:NA
+******************************************/
+int lynq_rock_main(int first_run)
+{
+ if(first_run <= 0)
+ {
+ LYINFLOG("Bad input value !!!");
+ return -1;
+ }
+
+ int ret = 0;
+ ret = rock_update_main(1);
+ LYINFLOG("rock_update_main ret = %d\n", ret);
+ if(ret != 0)
+ {
+ LYINFLOG("fota update fail!\n");
+ }
+ return 0;
+
+}
+
+/*****************************************
+* @brief:lynq_get_current_system
+* @param count [IN]:NA
+* @param sum [OUT]:NA
+* @return :success: curretn slot , failed:-1
+* @todo:NA
+* @see:NA
+* @warning:NA
+******************************************/
+int lynq_get_current_system()
+{
+ int ret = 0;
+
+ ret = zxic_dual_get_current_system();
+ if(ret < 0)
+ {
+ LYINFLOG("lynq get current system faile");
+ return -1;
+ }
+ if(ret == 34650)
+ {
+ LYINFLOG("Get current system is system A");
+ }
+ else if(ret == 39019)
+ {
+ LYINFLOG("Get current system is system B");
+ }
+
+ return ret;
+
+}
+
+/*****************************************
+* @brief:lynq_get_boot_to_system
+* @param count [IN]:NA
+* @param sum [OUT]:NA
+* @return :success: 0, failed:-1
+* @todo:NA
+* @see:NA
+* @warning:NA
+******************************************/
+int lynq_get_boot_to_system()
+{
+ int boot_to = 0;
+ boot_to = zxic_dual_get_boot_to_system();
+ if(boot_to < 0)
+ {
+ LYINFLOG("lynq get boot to system failed");
+ return -1;
+ }
+ else
+ {
+ LYINFLOG("Boot to system:0x%08X[%d]",boot_to);
+ }
+
+ return 0;
+
+}
+
+/*****************************************
+* @brief:lynq_set_boot_to_system
+* @param count [IN]:char *option_para
+* @param sum [OUT]:NA
+* @return :success: 0, failed:-1
+* @todo:NA
+* @see:NA
+* @warning:NA
+******************************************/
+int lynq_set_boot_to_system(char *option_para)
+{
+ int ret = 0;
+ if(option_para == NULL)
+ {
+ LYINFLOG("Input invalid value! null option parameters! ");
+ return -1;
+ }
+
+ ret = zxic_dual_set_boot_to_system(atoi(option_para), 0);
+ if(ret < 0)
+ {
+ LYINFLOG("Set boot to [%s] error ", option_para);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*****************************************
+* @brief:lynq_get_upgrade_status
+* @param count [IN]:NA
+* @param sum [OUT]:NA
+* @return :success: 0, failed:-1
+* @todo:NA
+* @see:NA
+* @warning:NA
+******************************************/
+int lynq_get_upgrade_status(void)
+{
+ z_upgrade_status_info_t status;
+ int ret = 0;
+
+
+ ret = zxic_dual_get_upgrade_status(&status);
+ if(ret < 0)
+ {
+ LYINFLOG("Get upgrade status fail! ");
+ return -1;
+ }
+
+ LYINFLOG("Current upgrade info: ");
+ LYINFLOG("Current upgrade status:%d ", status.upgrade_status);
+ LYINFLOG("Current upgrade total size:%d ", status.total_size);
+ LYINFLOG("Current upgrade updated size:%d ", status.upgraded_size);
+ if(status.upgrade_status != 4)
+ {
+ LYINFLOG("Upgrade failed");
+ return -1;
+ }
+
+ return 0;
+
+}
+
+/*****************************************
+* @brief:lynq_get_upgrade_status
+* @param count [IN]:NA
+* @param sum [OUT]:NA
+* @return :success: 0, failed:-1
+* @todo:NA
+* @see:NA
+* @warning:NA
+******************************************/
+int lynq_get_system_info()
+{
+ int ret = 0;
+ z_upgrade_system_info_t system_info;
+
+ ret = zxic_dual_get_system_status(&system_info);
+ if(ret < 0)
+ {
+ LYINFLOG("Get upgrade status fail! ");
+ return -1;
+ }
+ else
+ {
+ LYINFLOG("System info: ");
+ LYINFLOG("Boot to:0x%08X[%d] ", system_info.boot_to, system_info.boot_to);
+ LYINFLOG("Fota status:%d ", system_info.fota_status);
+ LYINFLOG("System1 system:0x%08X [%d] ", system_info.system_1.system, system_info.system_1.system);
+ LYINFLOG("System1 status:%d ", system_info.system_1.status);
+ LYINFLOG("System1 try_cnt:%d ", system_info.system_1.try_cnt);
+ LYINFLOG("System2 system:0x%08X [%d] ", system_info.system_2.system, system_info.system_2.system);
+ LYINFLOG("System2 status:%d ", system_info.system_2.status);
+ LYINFLOG("System2 try_cnt:%d ", system_info.system_2.try_cnt);
+ }
+
+ return 0;
+
+}
+
+/*****************************************
+* @brief:lynq_set_system_a_status
+* @param count [IN]:char *option_para
+* @param sum [OUT]:NA
+* @return :success: 0, failed:-1
+* @todo:NA
+* @see:NA
+* @warning:NA
+******************************************/
+int lynq_set_system_a_status(char *option_para)
+{
+ int ret = -1;
+ if (NULL == option_para)
+ {
+ LYINFLOG("Invalid option_para value ");
+ return -1;
+ }
+
+ //34650 A slot status : bootable:45527 unbootalbe:47806 success:23579
+ ret = zxic_dual_set_system_status(34650, atoi(option_para));
+ if(ret < 0)
+ {
+ LYINFLOG("Set system 1 status to [%s] error ", option_para);
+ return -1;
+ }
+
+ return 0;
+
+}
+
+/*****************************************
+* @brief:lynq_set_system_b_status
+* @param count [IN]:char *option_para
+* @param sum [OUT]:NA
+* @return :success: 0, failed:-1
+* @todo:NA
+* @see:NA
+* @warning:NA
+*****************************************/
+int lynq_set_system_b_status(char * option_para)
+{
+ int ret = -1;
+ if (NULL == option_para)
+ {
+ LYINFLOG("Invalid option_para value ");
+ return -1;
+ }
+
+ //39019 B slot status: bootable:45227 unbootalbe:47806 success:23579
+ ret = zxic_dual_set_system_status(39019, atoi(option_para));
+ if(ret < 0)
+ {
+ LYINFLOG("Set system 2 status to [%s] error ", option_para);
+ }
+
+ return 0;
+}
+
+/*****************************************
+* @brief:lynq_get_fota_status_for_nv
+* @param count [IN]:NA
+* @param sum [OUT]:NA
+* @return :success: 0, failed:-1
+* @todo:NA
+* @see:NA
+* @warning:NA
+*****************************************/
+int lynq_get_fota_status_for_nv()
+{
+ int status = 0;
+ status = zxic_dual_get_fota_status_for_nv();
+ if(status != 0)
+ {
+ LYINFLOG("Fota status:%d ", status);
+ return -1;
+ }
+ return 0;
+}
+
+/*****************************************
+* @brief:lynq_set_fota_status_for_nv
+* @param count [IN]:char *option_para
+* @param sum [OUT]:NA
+* @return :success: 0, failed:-1
+* @todo:NA
+* @see:NA
+* @warning:NA
+*****************************************/
+int lynq_set_fota_status_for_nv(char * option_para)
+{
+ int ret = 0;
+
+ if (NULL == option_para)
+ {
+ LYINFLOG("Invalid value! null option parameters! ");
+ return -1;
+ }
+
+ ret = zxic_dual_set_fota_status_for_nv(atoi(option_para));
+ if(ret < 0)
+ {
+ LYINFLOG("Set fota_status to [%s] error ", option_para);
+ }
+
+ return ret;
+}
+
+/*****************************************
+* @brief:lynq_sync_system
+* @param count [IN]:char *option_para
+* @param sum [OUT]:NA
+* @return :success: 0, failed:-1
+* @todo:NA
+* @see:NA
+* @warning:NA
+*****************************************/
+int lynq_sync_system()
+{
+ int ret = -1;
+
+ ret = zxic_dual_sync_system();
+ if( ret != 0)
+ {
+ LYINFLOG("lynq sync system failed !!!!");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*****************************************
+* @brief:lynq_get_upgrade_type
+* @param count [IN]:NA
+* @param sum [OUT]:NA
+* @return :success: 0, failed:-1
+* @todo:NA
+* @see:NA
+* @warning:NA
+*****************************************/
+int lynq_get_upgrade_type()
+{
+ int upgrade_type = -1;
+
+ upgrade_type = zxic_dual_get_upgrade_type();
+ if(upgrade_type < 0)
+ {
+ LYINFLOG("Get upgrade type failed \n");
+ return -1;
+ }
+ else
+ {
+ LYINFLOG("upgrade type is %d", upgrade_type);
+ }
+ return 0;
+}
+
+/*****************************************
+* @brief:lynq_get_sync_status
+* @param count [IN]:char *option_para
+* @param sum [OUT]:NA
+* @return :success: 0, failed:-1
+* @todo:NA
+* @see:NA
+* @warning:NA
+*****************************************/
+int lynq_get_sync_status()
+{
+ int sync_status = -2;
+ zxic_dual_get_sync_status(&sync_status);
+ LYINFLOG("Current sync status is %d", sync_status);
+ return 0;
+}
+
+/*****************************************
+* @brief:lynq_set_sync_status
+* @param count [IN]:char *option_para
+* @param sum [OUT]:NA
+* @return :success: 0, failed:-1
+* @todo:NA
+* @see:NA
+* @warning:NA
+*****************************************/
+int lynq_set_sync_status(char * option_para)
+{
+ int ret = 0;
+
+ if (NULL == option_para)
+ {
+ LYINFLOG("Command input invalid value! null option parameters! ");
+ return -1;
+ }
+
+ ret = zxic_dual_set_sync_status(atoi(option_para));
+ if (0 != ret)
+ {
+ LYINFLOG("set sync status fail");
+ return -1;
+ }
+
+ return 0;
+}
+
+
+#ifdef __cplusplus
+}
+#endif
+
diff --git a/cap/zx297520v3/src/lynq/lib/liblynq-qser-fota/makefile b/cap/zx297520v3/src/lynq/lib/liblynq-qser-fota/makefile
new file mode 100755
index 0000000..4abb722
--- /dev/null
+++ b/cap/zx297520v3/src/lynq/lib/liblynq-qser-fota/makefile
@@ -0,0 +1,76 @@
+SHELL = /bin/sh
+RM = rm -f
+
+LOCAL_CFLAGS := -Wall \
+ -std=gnu++14 \
+ -g -Os \
+ -flto \
+ -fPIC \
+ -fpermissive \
+
+
+
+ifeq ($(strip $(TARGET_PLATFORM)), T106)
+LOCAL_CFLAGS += -DBINDER_IPC_32BIT=1 -DHAVE_ENDIAN_H -DHAVE_PTHREADS -DHAVE_SYS_UIO_H -DHAVE_POSIX_FILEMAP -DHAVE_STRLCPY -DHAVE_PRCTL -DHAVE_MEMSET16 -DHAVE_MEMSET32 -DANDROID_SMP=0
+endif
+
+
+$(warning ################# rock ROOT: $(ROOT),includedir:$(includedir),)
+
+LOCAL_PATH = .
+
+LOCAL_C_INCLUDES = \
+ -I. \
+ -I$(LOCAL_PATH)/include \
+ -I$(ROOT)$(includedir)/logger \
+ -I$(ROOT)$(includedir)/liblog \
+ -I$(ROOT)$(includedir)/glib-2.0 \
+ -I$(ROOT)$(libdir)/glib-2.0/include \
+ -I$(ROOT)$(includedir) \
+
+
+
+LOCAL_LIBS := \
+ -L. \
+ -ldl \
+ -lstdc++ \
+ -llynq-log \
+ -lupi_ab \
+ -lcrypto \
+ -lnvram \
+
+
+SOURCES = $(wildcard *.cpp)
+
+EXECUTABLE = liblynq-fota.so
+
+OBJECTS=$(SOURCES:.cpp=.o)
+
+
+.PHONY: build clean install pack_rootfs
+
+all: build
+$(EXECUTABLE): $(OBJECTS)
+ $(CXX) -shared -Wl,--no-undefined $(OBJECTS) $(LOCAL_LIBS) $(LOCAL_CFLAGS) $(LOCAL_C_INCLUDES) -o $@
+
+%.o : %.cpp
+ $(CXX) $(LOCAL_C_INCLUDES) $(LOCAL_CFLAGS) $(LOCAL_LIBS) -o $@ -c $<
+
+build: $(EXECUTABLE)
+ $(warning ########## build $(EXECUTABLE) ##########)
+
+install:
+ mkdir -p $(ROOT)$(base_libdir)/
+ install $(EXECUTABLE) $(ROOT)$(base_libdir)/
+ mkdir -p $(ROOT)$(includedir)/$(NAME)/sdk
+
+pack_rootfs:
+ mkdir -p $(PACK_INITRAMFS_TO)$(base_libdir)/
+ cp -af $(EXECUTABLE) $(PACK_INITRAMFS_TO)$(base_libdir)/
+ $(CROSS)strip $(PACK_INITRAMFS_TO)$(base_libdir)/$(EXECUTABLE)
+ mkdir -p $(PACK_TO)$(base_libdir)/
+ cp -af $(EXECUTABLE) $(PACK_TO)$(base_libdir)/
+ $(CROSS)strip $(PACK_TO)$(base_libdir)/$(EXECUTABLE)
+.PHONY: clean
+clean:
+ $(RM) $(OBJECTS) $(EXECUTABLE)