| /* | 
 |  * Copyright (C) 2010 Juergen Beisert, Pengutronix | 
 |  * | 
 |  * This code is based on: | 
 |  * Author: Vitaly Wool <vital@embeddedalley.com> | 
 |  * | 
 |  * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. | 
 |  * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * as published by the Free Software Foundation; either version 2 | 
 |  * of the License, or (at your option) any later version. | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  */ | 
 |  | 
 | #define DRIVER_NAME "mxsfb" | 
 |  | 
 | /** | 
 |  * @file | 
 |  * @brief LCDIF driver for i.MX23 and i.MX28 | 
 |  * | 
 |  * The LCDIF support four modes of operation | 
 |  * - MPU interface (to drive smart displays) -> not supported yet | 
 |  * - VSYNC interface (like MPU interface plus Vsync) -> not supported yet | 
 |  * - Dotclock interface (to drive LC displays with RGB data and sync signals) | 
 |  * - DVI (to drive ITU-R BT656)  -> not supported yet | 
 |  * | 
 |  * This driver depends on a correct setup of the pins used for this purpose | 
 |  * (platform specific). | 
 |  * | 
 |  * For the developer: Don't forget to set the data bus width to the display | 
 |  * in the imx_fb_videomode structure. You will else end up with ugly colours. | 
 |  * If you fight against jitter you can vary the clock delay. This is a feature | 
 |  * of the i.MX28 and you can vary it between 2 ns ... 8 ns in 2 ns steps. Give | 
 |  * the required value in the imx_fb_videomode structure. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/clk.h> | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/io.h> | 
 | #include <mach/mxsfb.h> | 
 |  | 
 | #define REG_SET	4 | 
 | #define REG_CLR	8 | 
 |  | 
 | #define LCDC_CTRL			0x00 | 
 | #define LCDC_CTRL1			0x10 | 
 | #define LCDC_V4_CTRL2			0x20 | 
 | #define LCDC_V3_TRANSFER_COUNT		0x20 | 
 | #define LCDC_V4_TRANSFER_COUNT		0x30 | 
 | #define LCDC_V4_CUR_BUF			0x40 | 
 | #define LCDC_V4_NEXT_BUF		0x50 | 
 | #define LCDC_V3_CUR_BUF			0x30 | 
 | #define LCDC_V3_NEXT_BUF		0x40 | 
 | #define LCDC_TIMING			0x60 | 
 | #define LCDC_VDCTRL0			0x70 | 
 | #define LCDC_VDCTRL1			0x80 | 
 | #define LCDC_VDCTRL2			0x90 | 
 | #define LCDC_VDCTRL3			0xa0 | 
 | #define LCDC_VDCTRL4			0xb0 | 
 | #define LCDC_DVICTRL0			0xc0 | 
 | #define LCDC_DVICTRL1			0xd0 | 
 | #define LCDC_DVICTRL2			0xe0 | 
 | #define LCDC_DVICTRL3			0xf0 | 
 | #define LCDC_DVICTRL4			0x100 | 
 | #define LCDC_V4_DATA			0x180 | 
 | #define LCDC_V3_DATA			0x1b0 | 
 | #define LCDC_V4_DEBUG0			0x1d0 | 
 | #define LCDC_V3_DEBUG0			0x1f0 | 
 |  | 
 | #define CTRL_SFTRST			(1 << 31) | 
 | #define CTRL_CLKGATE			(1 << 30) | 
 | #define CTRL_BYPASS_COUNT		(1 << 19) | 
 | #define CTRL_VSYNC_MODE			(1 << 18) | 
 | #define CTRL_DOTCLK_MODE		(1 << 17) | 
 | #define CTRL_DATA_SELECT		(1 << 16) | 
 | #define CTRL_SET_BUS_WIDTH(x)		(((x) & 0x3) << 10) | 
 | #define CTRL_GET_BUS_WIDTH(x)		(((x) >> 10) & 0x3) | 
 | #define CTRL_SET_WORD_LENGTH(x)		(((x) & 0x3) << 8) | 
 | #define CTRL_GET_WORD_LENGTH(x)		(((x) >> 8) & 0x3) | 
 | #define CTRL_MASTER			(1 << 5) | 
 | #define CTRL_DF16			(1 << 3) | 
 | #define CTRL_DF18			(1 << 2) | 
 | #define CTRL_DF24			(1 << 1) | 
 | #define CTRL_RUN			(1 << 0) | 
 |  | 
 | #define CTRL1_FIFO_CLEAR		(1 << 21) | 
 | #define CTRL1_SET_BYTE_PACKAGING(x)	(((x) & 0xf) << 16) | 
 | #define CTRL1_GET_BYTE_PACKAGING(x)	(((x) >> 16) & 0xf) | 
 |  | 
 | #define TRANSFER_COUNT_SET_VCOUNT(x)	(((x) & 0xffff) << 16) | 
 | #define TRANSFER_COUNT_GET_VCOUNT(x)	(((x) >> 16) & 0xffff) | 
 | #define TRANSFER_COUNT_SET_HCOUNT(x)	((x) & 0xffff) | 
 | #define TRANSFER_COUNT_GET_HCOUNT(x)	((x) & 0xffff) | 
 |  | 
 |  | 
 | #define VDCTRL0_ENABLE_PRESENT		(1 << 28) | 
 | #define VDCTRL0_VSYNC_ACT_HIGH		(1 << 27) | 
 | #define VDCTRL0_HSYNC_ACT_HIGH		(1 << 26) | 
 | #define VDCTRL0_DOTCLK_ACT_FAILING	(1 << 25) | 
 | #define VDCTRL0_ENABLE_ACT_HIGH		(1 << 24) | 
 | #define VDCTRL0_VSYNC_PERIOD_UNIT	(1 << 21) | 
 | #define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	(1 << 20) | 
 | #define VDCTRL0_HALF_LINE		(1 << 19) | 
 | #define VDCTRL0_HALF_LINE_MODE		(1 << 18) | 
 | #define VDCTRL0_SET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff) | 
 | #define VDCTRL0_GET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff) | 
 |  | 
 | #define VDCTRL2_SET_HSYNC_PERIOD(x)	((x) & 0x3ffff) | 
 | #define VDCTRL2_GET_HSYNC_PERIOD(x)	((x) & 0x3ffff) | 
 |  | 
 | #define VDCTRL3_MUX_SYNC_SIGNALS	(1 << 29) | 
 | #define VDCTRL3_VSYNC_ONLY		(1 << 28) | 
 | #define SET_HOR_WAIT_CNT(x)		(((x) & 0xfff) << 16) | 
 | #define GET_HOR_WAIT_CNT(x)		(((x) >> 16) & 0xfff) | 
 | #define SET_VERT_WAIT_CNT(x)		((x) & 0xffff) | 
 | #define GET_VERT_WAIT_CNT(x)		((x) & 0xffff) | 
 |  | 
 | #define VDCTRL4_SET_DOTCLK_DLY(x)	(((x) & 0x7) << 29) /* v4 only */ | 
 | #define VDCTRL4_GET_DOTCLK_DLY(x)	(((x) >> 29) & 0x7) /* v4 only */ | 
 | #define VDCTRL4_SYNC_SIGNALS_ON		(1 << 18) | 
 | #define SET_DOTCLK_H_VALID_DATA_CNT(x)	((x) & 0x3ffff) | 
 |  | 
 | #define DEBUG0_HSYNC			(1 < 26) | 
 | #define DEBUG0_VSYNC			(1 < 25) | 
 |  | 
 | #define MIN_XRES			120 | 
 | #define MIN_YRES			120 | 
 |  | 
 | #define RED 0 | 
 | #define GREEN 1 | 
 | #define BLUE 2 | 
 | #define TRANSP 3 | 
 |  | 
 | enum mxsfb_devtype { | 
 | 	MXSFB_V3, | 
 | 	MXSFB_V4, | 
 | }; | 
 |  | 
 | /* CPU dependent register offsets */ | 
 | struct mxsfb_devdata { | 
 | 	unsigned transfer_count; | 
 | 	unsigned cur_buf; | 
 | 	unsigned next_buf; | 
 | 	unsigned debug0; | 
 | 	unsigned hs_wdth_mask; | 
 | 	unsigned hs_wdth_shift; | 
 | 	unsigned ipversion; | 
 | }; | 
 |  | 
 | struct mxsfb_info { | 
 | 	struct fb_info fb_info; | 
 | 	struct platform_device *pdev; | 
 | 	struct clk *clk; | 
 | 	void __iomem *base;	/* registers */ | 
 | 	unsigned allocated_size; | 
 | 	int enabled; | 
 | 	unsigned ld_intf_width; | 
 | 	unsigned dotclk_delay; | 
 | 	const struct mxsfb_devdata *devdata; | 
 | 	int mapped; | 
 | }; | 
 |  | 
 | #define mxsfb_is_v3(host) (host->devdata->ipversion == 3) | 
 | #define mxsfb_is_v4(host) (host->devdata->ipversion == 4) | 
 |  | 
 | static const struct mxsfb_devdata mxsfb_devdata[] = { | 
 | 	[MXSFB_V3] = { | 
 | 		.transfer_count = LCDC_V3_TRANSFER_COUNT, | 
 | 		.cur_buf = LCDC_V3_CUR_BUF, | 
 | 		.next_buf = LCDC_V3_NEXT_BUF, | 
 | 		.debug0 = LCDC_V3_DEBUG0, | 
 | 		.hs_wdth_mask = 0xff, | 
 | 		.hs_wdth_shift = 24, | 
 | 		.ipversion = 3, | 
 | 	}, | 
 | 	[MXSFB_V4] = { | 
 | 		.transfer_count = LCDC_V4_TRANSFER_COUNT, | 
 | 		.cur_buf = LCDC_V4_CUR_BUF, | 
 | 		.next_buf = LCDC_V4_NEXT_BUF, | 
 | 		.debug0 = LCDC_V4_DEBUG0, | 
 | 		.hs_wdth_mask = 0x3fff, | 
 | 		.hs_wdth_shift = 18, | 
 | 		.ipversion = 4, | 
 | 	}, | 
 | }; | 
 |  | 
 | #define to_imxfb_host(x) (container_of(x, struct mxsfb_info, fb_info)) | 
 |  | 
 | /* mask and shift depends on architecture */ | 
 | static inline u32 set_hsync_pulse_width(struct mxsfb_info *host, unsigned val) | 
 | { | 
 | 	return (val & host->devdata->hs_wdth_mask) << | 
 | 		host->devdata->hs_wdth_shift; | 
 | } | 
 |  | 
 | static inline u32 get_hsync_pulse_width(struct mxsfb_info *host, unsigned val) | 
 | { | 
 | 	return (val >> host->devdata->hs_wdth_shift) & | 
 | 		host->devdata->hs_wdth_mask; | 
 | } | 
 |  | 
 | static const struct fb_bitfield def_rgb565[] = { | 
 | 	[RED] = { | 
 | 		.offset = 11, | 
 | 		.length = 5, | 
 | 	}, | 
 | 	[GREEN] = { | 
 | 		.offset = 5, | 
 | 		.length = 6, | 
 | 	}, | 
 | 	[BLUE] = { | 
 | 		.offset = 0, | 
 | 		.length = 5, | 
 | 	}, | 
 | 	[TRANSP] = {	/* no support for transparency */ | 
 | 		.length = 0, | 
 | 	} | 
 | }; | 
 |  | 
 | static const struct fb_bitfield def_rgb666[] = { | 
 | 	[RED] = { | 
 | 		.offset = 16, | 
 | 		.length = 6, | 
 | 	}, | 
 | 	[GREEN] = { | 
 | 		.offset = 8, | 
 | 		.length = 6, | 
 | 	}, | 
 | 	[BLUE] = { | 
 | 		.offset = 0, | 
 | 		.length = 6, | 
 | 	}, | 
 | 	[TRANSP] = {	/* no support for transparency */ | 
 | 		.length = 0, | 
 | 	} | 
 | }; | 
 |  | 
 | static const struct fb_bitfield def_rgb888[] = { | 
 | 	[RED] = { | 
 | 		.offset = 16, | 
 | 		.length = 8, | 
 | 	}, | 
 | 	[GREEN] = { | 
 | 		.offset = 8, | 
 | 		.length = 8, | 
 | 	}, | 
 | 	[BLUE] = { | 
 | 		.offset = 0, | 
 | 		.length = 8, | 
 | 	}, | 
 | 	[TRANSP] = {	/* no support for transparency */ | 
 | 		.length = 0, | 
 | 	} | 
 | }; | 
 |  | 
 | static inline unsigned chan_to_field(unsigned chan, struct fb_bitfield *bf) | 
 | { | 
 | 	chan &= 0xffff; | 
 | 	chan >>= 16 - bf->length; | 
 | 	return chan << bf->offset; | 
 | } | 
 |  | 
 | static int mxsfb_check_var(struct fb_var_screeninfo *var, | 
 | 		struct fb_info *fb_info) | 
 | { | 
 | 	struct mxsfb_info *host = to_imxfb_host(fb_info); | 
 | 	const struct fb_bitfield *rgb = NULL; | 
 |  | 
 | 	if (var->xres < MIN_XRES) | 
 | 		var->xres = MIN_XRES; | 
 | 	if (var->yres < MIN_YRES) | 
 | 		var->yres = MIN_YRES; | 
 |  | 
 | 	var->xres_virtual = var->xres; | 
 |  | 
 | 	var->yres_virtual = var->yres; | 
 |  | 
 | 	switch (var->bits_per_pixel) { | 
 | 	case 16: | 
 | 		/* always expect RGB 565 */ | 
 | 		rgb = def_rgb565; | 
 | 		break; | 
 | 	case 32: | 
 | 		switch (host->ld_intf_width) { | 
 | 		case STMLCDIF_8BIT: | 
 | 			pr_debug("Unsupported LCD bus width mapping\n"); | 
 | 			break; | 
 | 		case STMLCDIF_16BIT: | 
 | 		case STMLCDIF_18BIT: | 
 | 			/* 24 bit to 18 bit mapping */ | 
 | 			rgb = def_rgb666; | 
 | 			break; | 
 | 		case STMLCDIF_24BIT: | 
 | 			/* real 24 bit */ | 
 | 			rgb = def_rgb888; | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	default: | 
 | 		pr_debug("Unsupported colour depth: %u\n", var->bits_per_pixel); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Copy the RGB parameters for this display | 
 | 	 * from the machine specific parameters. | 
 | 	 */ | 
 | 	var->red    = rgb[RED]; | 
 | 	var->green  = rgb[GREEN]; | 
 | 	var->blue   = rgb[BLUE]; | 
 | 	var->transp = rgb[TRANSP]; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void mxsfb_enable_controller(struct fb_info *fb_info) | 
 | { | 
 | 	struct mxsfb_info *host = to_imxfb_host(fb_info); | 
 | 	u32 reg; | 
 |  | 
 | 	dev_dbg(&host->pdev->dev, "%s\n", __func__); | 
 |  | 
 | 	clk_prepare_enable(host->clk); | 
 | 	clk_set_rate(host->clk, PICOS2KHZ(fb_info->var.pixclock) * 1000U); | 
 |  | 
 | 	/* if it was disabled, re-enable the mode again */ | 
 | 	writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_SET); | 
 |  | 
 | 	/* enable the SYNC signals first, then the DMA engine */ | 
 | 	reg = readl(host->base + LCDC_VDCTRL4); | 
 | 	reg |= VDCTRL4_SYNC_SIGNALS_ON; | 
 | 	writel(reg, host->base + LCDC_VDCTRL4); | 
 |  | 
 | 	writel(CTRL_RUN, host->base + LCDC_CTRL + REG_SET); | 
 |  | 
 | 	host->enabled = 1; | 
 | } | 
 |  | 
 | static void mxsfb_disable_controller(struct fb_info *fb_info) | 
 | { | 
 | 	struct mxsfb_info *host = to_imxfb_host(fb_info); | 
 | 	unsigned loop; | 
 | 	u32 reg; | 
 |  | 
 | 	dev_dbg(&host->pdev->dev, "%s\n", __func__); | 
 |  | 
 | 	/* | 
 | 	 * Even if we disable the controller here, it will still continue | 
 | 	 * until its FIFOs are running out of data | 
 | 	 */ | 
 | 	writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_CLR); | 
 |  | 
 | 	loop = 1000; | 
 | 	while (loop) { | 
 | 		reg = readl(host->base + LCDC_CTRL); | 
 | 		if (!(reg & CTRL_RUN)) | 
 | 			break; | 
 | 		loop--; | 
 | 	} | 
 |  | 
 | 	reg = readl(host->base + LCDC_VDCTRL4); | 
 | 	writel(reg & ~VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4); | 
 |  | 
 | 	clk_disable_unprepare(host->clk); | 
 |  | 
 | 	host->enabled = 0; | 
 | } | 
 |  | 
 | static int mxsfb_set_par(struct fb_info *fb_info) | 
 | { | 
 | 	struct mxsfb_info *host = to_imxfb_host(fb_info); | 
 | 	u32 ctrl, vdctrl0, vdctrl4; | 
 | 	int line_size, fb_size; | 
 | 	int reenable = 0; | 
 |  | 
 | 	line_size =  fb_info->var.xres * (fb_info->var.bits_per_pixel >> 3); | 
 | 	fb_size = fb_info->var.yres_virtual * line_size; | 
 |  | 
 | 	if (fb_size > fb_info->fix.smem_len) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	fb_info->fix.line_length = line_size; | 
 |  | 
 | 	/* | 
 | 	 * It seems, you can't re-program the controller if it is still running. | 
 | 	 * This may lead into shifted pictures (FIFO issue?). | 
 | 	 * So, first stop the controller and drain its FIFOs | 
 | 	 */ | 
 | 	if (host->enabled) { | 
 | 		reenable = 1; | 
 | 		mxsfb_disable_controller(fb_info); | 
 | 	} | 
 |  | 
 | 	/* clear the FIFOs */ | 
 | 	writel(CTRL1_FIFO_CLEAR, host->base + LCDC_CTRL1 + REG_SET); | 
 |  | 
 | 	ctrl = CTRL_BYPASS_COUNT | CTRL_MASTER | | 
 | 		CTRL_SET_BUS_WIDTH(host->ld_intf_width); | 
 |  | 
 | 	switch (fb_info->var.bits_per_pixel) { | 
 | 	case 16: | 
 | 		dev_dbg(&host->pdev->dev, "Setting up RGB565 mode\n"); | 
 | 		ctrl |= CTRL_SET_WORD_LENGTH(0); | 
 | 		writel(CTRL1_SET_BYTE_PACKAGING(0xf), host->base + LCDC_CTRL1); | 
 | 		break; | 
 | 	case 32: | 
 | 		dev_dbg(&host->pdev->dev, "Setting up RGB888/666 mode\n"); | 
 | 		ctrl |= CTRL_SET_WORD_LENGTH(3); | 
 | 		switch (host->ld_intf_width) { | 
 | 		case STMLCDIF_8BIT: | 
 | 			dev_dbg(&host->pdev->dev, | 
 | 					"Unsupported LCD bus width mapping\n"); | 
 | 			return -EINVAL; | 
 | 		case STMLCDIF_16BIT: | 
 | 		case STMLCDIF_18BIT: | 
 | 			/* 24 bit to 18 bit mapping */ | 
 | 			ctrl |= CTRL_DF24; /* ignore the upper 2 bits in | 
 | 					    *  each colour component | 
 | 					    */ | 
 | 			break; | 
 | 		case STMLCDIF_24BIT: | 
 | 			/* real 24 bit */ | 
 | 			break; | 
 | 		} | 
 | 		/* do not use packed pixels = one pixel per word instead */ | 
 | 		writel(CTRL1_SET_BYTE_PACKAGING(0x7), host->base + LCDC_CTRL1); | 
 | 		break; | 
 | 	default: | 
 | 		dev_dbg(&host->pdev->dev, "Unhandled color depth of %u\n", | 
 | 				fb_info->var.bits_per_pixel); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	writel(ctrl, host->base + LCDC_CTRL); | 
 |  | 
 | 	writel(TRANSFER_COUNT_SET_VCOUNT(fb_info->var.yres) | | 
 | 			TRANSFER_COUNT_SET_HCOUNT(fb_info->var.xres), | 
 | 			host->base + host->devdata->transfer_count); | 
 |  | 
 | 	vdctrl0 = VDCTRL0_ENABLE_PRESENT |	/* always in DOTCLOCK mode */ | 
 | 		VDCTRL0_VSYNC_PERIOD_UNIT | | 
 | 		VDCTRL0_VSYNC_PULSE_WIDTH_UNIT | | 
 | 		VDCTRL0_SET_VSYNC_PULSE_WIDTH(fb_info->var.vsync_len); | 
 | 	if (fb_info->var.sync & FB_SYNC_HOR_HIGH_ACT) | 
 | 		vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH; | 
 | 	if (fb_info->var.sync & FB_SYNC_VERT_HIGH_ACT) | 
 | 		vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH; | 
 | 	if (fb_info->var.sync & FB_SYNC_DATA_ENABLE_HIGH_ACT) | 
 | 		vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH; | 
 | 	if (fb_info->var.sync & FB_SYNC_DOTCLK_FAILING_ACT) | 
 | 		vdctrl0 |= VDCTRL0_DOTCLK_ACT_FAILING; | 
 |  | 
 | 	writel(vdctrl0, host->base + LCDC_VDCTRL0); | 
 |  | 
 | 	/* frame length in lines */ | 
 | 	writel(fb_info->var.upper_margin + fb_info->var.vsync_len + | 
 | 		fb_info->var.lower_margin + fb_info->var.yres, | 
 | 		host->base + LCDC_VDCTRL1); | 
 |  | 
 | 	/* line length in units of clocks or pixels */ | 
 | 	writel(set_hsync_pulse_width(host, fb_info->var.hsync_len) | | 
 | 		VDCTRL2_SET_HSYNC_PERIOD(fb_info->var.left_margin + | 
 | 		fb_info->var.hsync_len + fb_info->var.right_margin + | 
 | 		fb_info->var.xres), | 
 | 		host->base + LCDC_VDCTRL2); | 
 |  | 
 | 	writel(SET_HOR_WAIT_CNT(fb_info->var.left_margin + | 
 | 		fb_info->var.hsync_len) | | 
 | 		SET_VERT_WAIT_CNT(fb_info->var.upper_margin + | 
 | 			fb_info->var.vsync_len), | 
 | 		host->base + LCDC_VDCTRL3); | 
 |  | 
 | 	vdctrl4 = SET_DOTCLK_H_VALID_DATA_CNT(fb_info->var.xres); | 
 | 	if (mxsfb_is_v4(host)) | 
 | 		vdctrl4 |= VDCTRL4_SET_DOTCLK_DLY(host->dotclk_delay); | 
 | 	writel(vdctrl4, host->base + LCDC_VDCTRL4); | 
 |  | 
 | 	writel(fb_info->fix.smem_start + | 
 | 			fb_info->fix.line_length * fb_info->var.yoffset, | 
 | 			host->base + host->devdata->next_buf); | 
 |  | 
 | 	if (reenable) | 
 | 		mxsfb_enable_controller(fb_info); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mxsfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | 
 | 		u_int transp, struct fb_info *fb_info) | 
 | { | 
 | 	unsigned int val; | 
 | 	int ret = -EINVAL; | 
 |  | 
 | 	/* | 
 | 	 * If greyscale is true, then we convert the RGB value | 
 | 	 * to greyscale no matter what visual we are using. | 
 | 	 */ | 
 | 	if (fb_info->var.grayscale) | 
 | 		red = green = blue = (19595 * red + 38470 * green + | 
 | 					7471 * blue) >> 16; | 
 |  | 
 | 	switch (fb_info->fix.visual) { | 
 | 	case FB_VISUAL_TRUECOLOR: | 
 | 		/* | 
 | 		 * 12 or 16-bit True Colour.  We encode the RGB value | 
 | 		 * according to the RGB bitfield information. | 
 | 		 */ | 
 | 		if (regno < 16) { | 
 | 			u32 *pal = fb_info->pseudo_palette; | 
 |  | 
 | 			val  = chan_to_field(red, &fb_info->var.red); | 
 | 			val |= chan_to_field(green, &fb_info->var.green); | 
 | 			val |= chan_to_field(blue, &fb_info->var.blue); | 
 |  | 
 | 			pal[regno] = val; | 
 | 			ret = 0; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case FB_VISUAL_STATIC_PSEUDOCOLOR: | 
 | 	case FB_VISUAL_PSEUDOCOLOR: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int mxsfb_blank(int blank, struct fb_info *fb_info) | 
 | { | 
 | 	struct mxsfb_info *host = to_imxfb_host(fb_info); | 
 |  | 
 | 	switch (blank) { | 
 | 	case FB_BLANK_POWERDOWN: | 
 | 	case FB_BLANK_VSYNC_SUSPEND: | 
 | 	case FB_BLANK_HSYNC_SUSPEND: | 
 | 	case FB_BLANK_NORMAL: | 
 | 		if (host->enabled) | 
 | 			mxsfb_disable_controller(fb_info); | 
 | 		break; | 
 |  | 
 | 	case FB_BLANK_UNBLANK: | 
 | 		if (!host->enabled) | 
 | 			mxsfb_enable_controller(fb_info); | 
 | 		break; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mxsfb_pan_display(struct fb_var_screeninfo *var, | 
 | 		struct fb_info *fb_info) | 
 | { | 
 | 	struct mxsfb_info *host = to_imxfb_host(fb_info); | 
 | 	unsigned offset; | 
 |  | 
 | 	if (var->xoffset != 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	offset = fb_info->fix.line_length * var->yoffset; | 
 |  | 
 | 	/* update on next VSYNC */ | 
 | 	writel(fb_info->fix.smem_start + offset, | 
 | 			host->base + host->devdata->next_buf); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct fb_ops mxsfb_ops = { | 
 | 	.owner = THIS_MODULE, | 
 | 	.fb_check_var = mxsfb_check_var, | 
 | 	.fb_set_par = mxsfb_set_par, | 
 | 	.fb_setcolreg = mxsfb_setcolreg, | 
 | 	.fb_blank = mxsfb_blank, | 
 | 	.fb_pan_display = mxsfb_pan_display, | 
 | 	.fb_fillrect = cfb_fillrect, | 
 | 	.fb_copyarea = cfb_copyarea, | 
 | 	.fb_imageblit = cfb_imageblit, | 
 | }; | 
 |  | 
 | static int __devinit mxsfb_restore_mode(struct mxsfb_info *host) | 
 | { | 
 | 	struct fb_info *fb_info = &host->fb_info; | 
 | 	unsigned line_count; | 
 | 	unsigned period; | 
 | 	unsigned long pa, fbsize; | 
 | 	int bits_per_pixel, ofs; | 
 | 	u32 transfer_count, vdctrl0, vdctrl2, vdctrl3, vdctrl4, ctrl; | 
 | 	struct fb_videomode vmode; | 
 |  | 
 | 	/* Only restore the mode when the controller is running */ | 
 | 	ctrl = readl(host->base + LCDC_CTRL); | 
 | 	if (!(ctrl & CTRL_RUN)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	vdctrl0 = readl(host->base + LCDC_VDCTRL0); | 
 | 	vdctrl2 = readl(host->base + LCDC_VDCTRL2); | 
 | 	vdctrl3 = readl(host->base + LCDC_VDCTRL3); | 
 | 	vdctrl4 = readl(host->base + LCDC_VDCTRL4); | 
 |  | 
 | 	transfer_count = readl(host->base + host->devdata->transfer_count); | 
 |  | 
 | 	vmode.xres = TRANSFER_COUNT_GET_HCOUNT(transfer_count); | 
 | 	vmode.yres = TRANSFER_COUNT_GET_VCOUNT(transfer_count); | 
 |  | 
 | 	switch (CTRL_GET_WORD_LENGTH(ctrl)) { | 
 | 	case 0: | 
 | 		bits_per_pixel = 16; | 
 | 		break; | 
 | 	case 3: | 
 | 		bits_per_pixel = 32; | 
 | 	case 1: | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	fb_info->var.bits_per_pixel = bits_per_pixel; | 
 |  | 
 | 	vmode.pixclock = KHZ2PICOS(clk_get_rate(host->clk) / 1000U); | 
 | 	vmode.hsync_len = get_hsync_pulse_width(host, vdctrl2); | 
 | 	vmode.left_margin = GET_HOR_WAIT_CNT(vdctrl3) - vmode.hsync_len; | 
 | 	vmode.right_margin = VDCTRL2_GET_HSYNC_PERIOD(vdctrl2) - vmode.hsync_len - | 
 | 		vmode.left_margin - vmode.xres; | 
 | 	vmode.vsync_len = VDCTRL0_GET_VSYNC_PULSE_WIDTH(vdctrl0); | 
 | 	period = readl(host->base + LCDC_VDCTRL1); | 
 | 	vmode.upper_margin = GET_VERT_WAIT_CNT(vdctrl3) - vmode.vsync_len; | 
 | 	vmode.lower_margin = period - vmode.vsync_len - vmode.upper_margin - vmode.yres; | 
 |  | 
 | 	vmode.vmode = FB_VMODE_NONINTERLACED; | 
 |  | 
 | 	vmode.sync = 0; | 
 | 	if (vdctrl0 & VDCTRL0_HSYNC_ACT_HIGH) | 
 | 		vmode.sync |= FB_SYNC_HOR_HIGH_ACT; | 
 | 	if (vdctrl0 & VDCTRL0_VSYNC_ACT_HIGH) | 
 | 		vmode.sync |= FB_SYNC_VERT_HIGH_ACT; | 
 |  | 
 | 	pr_debug("Reconstructed video mode:\n"); | 
 | 	pr_debug("%dx%d, hsync: %u left: %u, right: %u, vsync: %u, upper: %u, lower: %u\n", | 
 | 			vmode.xres, vmode.yres, | 
 | 			vmode.hsync_len, vmode.left_margin, vmode.right_margin, | 
 | 			vmode.vsync_len, vmode.upper_margin, vmode.lower_margin); | 
 | 	pr_debug("pixclk: %ldkHz\n", PICOS2KHZ(vmode.pixclock)); | 
 |  | 
 | 	fb_add_videomode(&vmode, &fb_info->modelist); | 
 |  | 
 | 	host->ld_intf_width = CTRL_GET_BUS_WIDTH(ctrl); | 
 | 	host->dotclk_delay = VDCTRL4_GET_DOTCLK_DLY(vdctrl4); | 
 |  | 
 | 	fb_info->fix.line_length = vmode.xres * (bits_per_pixel >> 3); | 
 |  | 
 | 	pa = readl(host->base + host->devdata->cur_buf); | 
 | 	fbsize = fb_info->fix.line_length * vmode.yres; | 
 | 	if (pa < fb_info->fix.smem_start) | 
 | 		return -EINVAL; | 
 | 	if (pa + fbsize > fb_info->fix.smem_start + fb_info->fix.smem_len) | 
 | 		return -EINVAL; | 
 | 	ofs = pa - fb_info->fix.smem_start; | 
 | 	if (ofs) { | 
 | 		memmove(fb_info->screen_base, fb_info->screen_base + ofs, fbsize); | 
 | 		writel(fb_info->fix.smem_start, host->base + host->devdata->next_buf); | 
 | 	} | 
 |  | 
 | 	line_count = fb_info->fix.smem_len / fb_info->fix.line_length; | 
 | 	fb_info->fix.ypanstep = 1; | 
 |  | 
 | 	clk_prepare_enable(host->clk); | 
 | 	host->enabled = 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __devinit mxsfb_init_fbinfo(struct mxsfb_info *host) | 
 | { | 
 | 	struct fb_info *fb_info = &host->fb_info; | 
 | 	struct fb_var_screeninfo *var = &fb_info->var; | 
 | 	struct mxsfb_platform_data *pdata = host->pdev->dev.platform_data; | 
 | 	dma_addr_t fb_phys; | 
 | 	void *fb_virt; | 
 | 	unsigned fb_size = pdata->fb_size; | 
 |  | 
 | 	fb_info->fbops = &mxsfb_ops; | 
 | 	fb_info->flags = FBINFO_FLAG_DEFAULT | FBINFO_READS_FAST; | 
 | 	strlcpy(fb_info->fix.id, "mxs", sizeof(fb_info->fix.id)); | 
 | 	fb_info->fix.type = FB_TYPE_PACKED_PIXELS; | 
 | 	fb_info->fix.ypanstep = 1; | 
 | 	fb_info->fix.visual = FB_VISUAL_TRUECOLOR, | 
 | 	fb_info->fix.accel = FB_ACCEL_NONE; | 
 |  | 
 | 	var->bits_per_pixel = pdata->default_bpp ? pdata->default_bpp : 16; | 
 | 	var->nonstd = 0; | 
 | 	var->activate = FB_ACTIVATE_NOW; | 
 | 	var->accel_flags = 0; | 
 | 	var->vmode = FB_VMODE_NONINTERLACED; | 
 |  | 
 | 	host->dotclk_delay = pdata->dotclk_delay; | 
 | 	host->ld_intf_width = pdata->ld_intf_width; | 
 |  | 
 | 	/* Memory allocation for framebuffer */ | 
 | 	if (pdata->fb_phys) { | 
 | 		if (!fb_size) | 
 | 			return -EINVAL; | 
 |  | 
 | 		fb_phys = pdata->fb_phys; | 
 |  | 
 | 		if (!request_mem_region(fb_phys, fb_size, host->pdev->name)) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		fb_virt = ioremap(fb_phys, fb_size); | 
 | 		if (!fb_virt) { | 
 | 			release_mem_region(fb_phys, fb_size); | 
 | 			return -ENOMEM; | 
 | 		} | 
 | 		host->mapped = 1; | 
 | 	} else { | 
 | 		if (!fb_size) | 
 | 			fb_size = SZ_2M; /* default */ | 
 | 		fb_virt = alloc_pages_exact(fb_size, GFP_DMA); | 
 | 		if (!fb_virt) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		fb_phys = virt_to_phys(fb_virt); | 
 | 	} | 
 |  | 
 | 	fb_info->fix.smem_start = fb_phys; | 
 | 	fb_info->screen_base = fb_virt; | 
 | 	fb_info->screen_size = fb_info->fix.smem_len = fb_size; | 
 |  | 
 | 	if (mxsfb_restore_mode(host)) | 
 | 		memset(fb_virt, 0, fb_size); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __devexit mxsfb_free_videomem(struct mxsfb_info *host) | 
 | { | 
 | 	struct fb_info *fb_info = &host->fb_info; | 
 |  | 
 | 	if (host->mapped) { | 
 | 		iounmap(fb_info->screen_base); | 
 | 		release_mem_region(fb_info->fix.smem_start, | 
 | 				fb_info->screen_size); | 
 | 	} else { | 
 | 		free_pages_exact(fb_info->screen_base, fb_info->fix.smem_len); | 
 | 	} | 
 | } | 
 |  | 
 | static int __devinit mxsfb_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct mxsfb_platform_data *pdata = pdev->dev.platform_data; | 
 | 	struct resource *res; | 
 | 	struct mxsfb_info *host; | 
 | 	struct fb_info *fb_info; | 
 | 	struct fb_modelist *modelist; | 
 | 	int i, ret; | 
 |  | 
 | 	if (!pdata) { | 
 | 		dev_err(&pdev->dev, "No platformdata. Giving up\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	if (!res) { | 
 | 		dev_err(&pdev->dev, "Cannot get memory IO resource\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	if (!request_mem_region(res->start, resource_size(res), pdev->name)) | 
 | 		return -EBUSY; | 
 |  | 
 | 	fb_info = framebuffer_alloc(sizeof(struct mxsfb_info), &pdev->dev); | 
 | 	if (!fb_info) { | 
 | 		dev_err(&pdev->dev, "Failed to allocate fbdev\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto error_alloc_info; | 
 | 	} | 
 |  | 
 | 	host = to_imxfb_host(fb_info); | 
 |  | 
 | 	host->base = ioremap(res->start, resource_size(res)); | 
 | 	if (!host->base) { | 
 | 		dev_err(&pdev->dev, "ioremap failed\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto error_ioremap; | 
 | 	} | 
 |  | 
 | 	host->pdev = pdev; | 
 | 	platform_set_drvdata(pdev, host); | 
 |  | 
 | 	host->devdata = &mxsfb_devdata[pdev->id_entry->driver_data]; | 
 |  | 
 | 	host->clk = clk_get(&host->pdev->dev, NULL); | 
 | 	if (IS_ERR(host->clk)) { | 
 | 		ret = PTR_ERR(host->clk); | 
 | 		goto error_getclock; | 
 | 	} | 
 |  | 
 | 	fb_info->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL); | 
 | 	if (!fb_info->pseudo_palette) { | 
 | 		ret = -ENOMEM; | 
 | 		goto error_pseudo_pallette; | 
 | 	} | 
 |  | 
 | 	INIT_LIST_HEAD(&fb_info->modelist); | 
 |  | 
 | 	ret = mxsfb_init_fbinfo(host); | 
 | 	if (ret != 0) | 
 | 		goto error_init_fb; | 
 |  | 
 | 	for (i = 0; i < pdata->mode_count; i++) | 
 | 		fb_add_videomode(&pdata->mode_list[i], &fb_info->modelist); | 
 |  | 
 | 	modelist = list_first_entry(&fb_info->modelist, | 
 | 			struct fb_modelist, list); | 
 | 	fb_videomode_to_var(&fb_info->var, &modelist->mode); | 
 |  | 
 | 	/* init the color fields */ | 
 | 	mxsfb_check_var(&fb_info->var, fb_info); | 
 |  | 
 | 	platform_set_drvdata(pdev, fb_info); | 
 |  | 
 | 	ret = register_framebuffer(fb_info); | 
 | 	if (ret != 0) { | 
 | 		dev_err(&pdev->dev,"Failed to register framebuffer\n"); | 
 | 		goto error_register; | 
 | 	} | 
 |  | 
 | 	if (!host->enabled) { | 
 | 		writel(0, host->base + LCDC_CTRL); | 
 | 		mxsfb_set_par(fb_info); | 
 | 		mxsfb_enable_controller(fb_info); | 
 | 	} | 
 |  | 
 | 	dev_info(&pdev->dev, "initialized\n"); | 
 |  | 
 | 	return 0; | 
 |  | 
 | error_register: | 
 | 	if (host->enabled) | 
 | 		clk_disable_unprepare(host->clk); | 
 | 	fb_destroy_modelist(&fb_info->modelist); | 
 | error_init_fb: | 
 | 	kfree(fb_info->pseudo_palette); | 
 | error_pseudo_pallette: | 
 | 	clk_put(host->clk); | 
 | error_getclock: | 
 | 	iounmap(host->base); | 
 | error_ioremap: | 
 | 	framebuffer_release(fb_info); | 
 | error_alloc_info: | 
 | 	release_mem_region(res->start, resource_size(res)); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int __devexit mxsfb_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct fb_info *fb_info = platform_get_drvdata(pdev); | 
 | 	struct mxsfb_info *host = to_imxfb_host(fb_info); | 
 | 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 |  | 
 | 	if (host->enabled) | 
 | 		mxsfb_disable_controller(fb_info); | 
 |  | 
 | 	unregister_framebuffer(fb_info); | 
 | 	kfree(fb_info->pseudo_palette); | 
 | 	mxsfb_free_videomem(host); | 
 | 	iounmap(host->base); | 
 | 	clk_put(host->clk); | 
 |  | 
 | 	framebuffer_release(fb_info); | 
 | 	release_mem_region(res->start, resource_size(res)); | 
 |  | 
 | 	platform_set_drvdata(pdev, NULL); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_device_id mxsfb_devtype[] = { | 
 | 	{ | 
 | 		.name = "imx23-fb", | 
 | 		.driver_data = MXSFB_V3, | 
 | 	}, { | 
 | 		.name = "imx28-fb", | 
 | 		.driver_data = MXSFB_V4, | 
 | 	}, { | 
 | 		/* sentinel */ | 
 | 	} | 
 | }; | 
 | MODULE_DEVICE_TABLE(platform, mxsfb_devtype); | 
 |  | 
 | static struct platform_driver mxsfb_driver = { | 
 | 	.probe = mxsfb_probe, | 
 | 	.remove = __devexit_p(mxsfb_remove), | 
 | 	.id_table = mxsfb_devtype, | 
 | 	.driver = { | 
 | 		   .name = DRIVER_NAME, | 
 | 	}, | 
 | }; | 
 |  | 
 | module_platform_driver(mxsfb_driver); | 
 |  | 
 | MODULE_DESCRIPTION("Freescale mxs framebuffer driver"); | 
 | MODULE_AUTHOR("Sascha Hauer, Pengutronix"); | 
 | MODULE_LICENSE("GPL"); |