| /* Conversion module for ISO-2022-CN-EXT. |
| Copyright (C) 2000-2016 Free Software Foundation, Inc. |
| This file is part of the GNU C Library. |
| Contributed by Ulrich Drepper <drepper@cygnus.com>, 2000. |
| |
| The GNU C Library is free software; you can redistribute it and/or |
| modify it under the terms of the GNU Lesser General Public |
| License as published by the Free Software Foundation; either |
| version 2.1 of the License, or (at your option) any later version. |
| |
| The GNU C Library is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| Lesser General Public License for more details. |
| |
| You should have received a copy of the GNU Lesser General Public |
| License along with the GNU C Library; if not, see |
| <http://www.gnu.org/licenses/>. */ |
| |
| #include <dlfcn.h> |
| #include <gconv.h> |
| #include <stdint.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include "gb2312.h" |
| #include "iso-ir-165.h" |
| #include "cns11643.h" |
| #include "cns11643l1.h" |
| #include "cns11643l2.h" |
| |
| #include <assert.h> |
| |
| /* This makes obvious what everybody knows: 0x1b is the Esc character. */ |
| #define ESC 0x1b |
| |
| /* We have single-byte shift-in and shift-out sequences, and the single |
| shift sequences SS2 and SS3 which replaces the SS2/SS3 designation for |
| the next two bytes. */ |
| #define SI 0x0f |
| #define SO 0x0e |
| #define SS2_0 ESC |
| #define SS2_1 0x4e |
| #define SS3_0 ESC |
| #define SS3_1 0x4f |
| |
| /* Definitions used in the body of the `gconv' function. */ |
| #define CHARSET_NAME "ISO-2022-CN-EXT//" |
| #define DEFINE_INIT 1 |
| #define DEFINE_FINI 1 |
| #define ONE_DIRECTION 0 |
| #define FROM_LOOP from_iso2022cn_ext_loop |
| #define TO_LOOP to_iso2022cn_ext_loop |
| #define FROM_LOOP_MIN_NEEDED_FROM 1 |
| #define FROM_LOOP_MAX_NEEDED_FROM 4 |
| #define FROM_LOOP_MIN_NEEDED_TO 4 |
| #define FROM_LOOP_MAX_NEEDED_TO 4 |
| #define TO_LOOP_MIN_NEEDED_FROM 4 |
| #define TO_LOOP_MAX_NEEDED_FROM 4 |
| #define TO_LOOP_MIN_NEEDED_TO 1 |
| #define TO_LOOP_MAX_NEEDED_TO 6 |
| #define PREPARE_LOOP \ |
| int save_set; \ |
| int *setp = &data->__statep->__count; |
| #define EXTRA_LOOP_ARGS , setp |
| |
| |
| /* The charsets GB/T 12345-90, GB 7589-87, GB/T 13131-9X, GB 7590-87, |
| and GB/T 13132-9X are not registered to the best of my knowledge and |
| therefore have no escape sequence assigned. We cannot handle them |
| for this reason. Tell the implementation about this. */ |
| #define X12345 '\0' |
| #define X7589 '\0' |
| #define X13131 '\0' |
| #define X7590 '\0' |
| #define X13132 '\0' |
| |
| |
| /* The COUNT element of the state keeps track of the currently selected |
| character set. The possible values are: */ |
| enum |
| { |
| ASCII_set = 0, |
| GB2312_set, |
| GB12345_set, |
| CNS11643_1_set, |
| ISO_IR_165_set, |
| SO_mask = 7, |
| |
| GB7589_set = 1 << 3, |
| GB13131_set = 2 << 3, |
| CNS11643_2_set = 3 << 3, |
| SS2_mask = 3 << 3, |
| |
| GB7590_set = 1 << 5, |
| GB13132_set = 2 << 5, |
| CNS11643_3_set = 3 << 5, |
| CNS11643_4_set = 4 << 5, |
| CNS11643_5_set = 5 << 5, |
| CNS11643_6_set = 6 << 5, |
| CNS11643_7_set = 7 << 5, |
| SS3_mask = 7 << 5, |
| |
| #define CURRENT_MASK (SO_mask | SS2_mask | SS3_mask) |
| |
| GB2312_ann = 1 << 8, |
| GB12345_ann = 2 << 8, |
| CNS11643_1_ann = 3 << 8, |
| ISO_IR_165_ann = 4 << 8, |
| SO_ann = 7 << 8, |
| |
| GB7589_ann = 1 << 11, |
| GB13131_ann = 2 << 11, |
| CNS11643_2_ann = 3 << 11, |
| SS2_ann = 3 << 11, |
| |
| GB7590_ann = 1 << 13, |
| GB13132_ann = 2 << 13, |
| CNS11643_3_ann = 3 << 13, |
| CNS11643_4_ann = 4 << 13, |
| CNS11643_5_ann = 5 << 13, |
| CNS11643_6_ann = 6 << 13, |
| CNS11643_7_ann = 7 << 13, |
| SS3_ann = 7 << 13 |
| }; |
| |
| |
| /* Since this is a stateful encoding we have to provide code which resets |
| the output state to the initial state. This has to be done during the |
| flushing. */ |
| #define EMIT_SHIFT_TO_INIT \ |
| if (data->__statep->__count >> 3 != ASCII_set) \ |
| { \ |
| if (FROM_DIRECTION) \ |
| /* It's easy, we don't have to emit anything, we just reset the \ |
| state for the input. */ \ |
| data->__statep->__count = ASCII_set << 3; \ |
| else \ |
| { \ |
| /* We are not in the initial state. To switch back we have \ |
| to emit `SI'. */ \ |
| if (__glibc_unlikely (outbuf == outend)) \ |
| /* We don't have enough room in the output buffer. */ \ |
| status = __GCONV_FULL_OUTPUT; \ |
| else \ |
| { \ |
| /* Write out the shift sequence. */ \ |
| *outbuf++ = SI; \ |
| if (data->__flags & __GCONV_IS_LAST) \ |
| *irreversible += 1; \ |
| data->__statep->__count = ASCII_set << 3; \ |
| } \ |
| } \ |
| } |
| |
| |
| /* Since we might have to reset input pointer we must be able to save |
| and retore the state. */ |
| #define SAVE_RESET_STATE(Save) \ |
| if (Save) \ |
| save_set = *setp; \ |
| else \ |
| *setp = save_set |
| |
| |
| /* First define the conversion function from ISO-2022-CN to UCS4. */ |
| #define MIN_NEEDED_INPUT FROM_LOOP_MIN_NEEDED_FROM |
| #define MAX_NEEDED_INPUT FROM_LOOP_MAX_NEEDED_FROM |
| #define MIN_NEEDED_OUTPUT FROM_LOOP_MIN_NEEDED_TO |
| #define MAX_NEEDED_OUTPUT FROM_LOOP_MAX_NEEDED_TO |
| #define LOOPFCT FROM_LOOP |
| #define BODY \ |
| { \ |
| uint32_t ch = *inptr; \ |
| \ |
| /* This is a 7bit character set, disallow all 8bit characters. */ \ |
| if (ch > 0x7f) \ |
| STANDARD_FROM_LOOP_ERR_HANDLER (1); \ |
| \ |
| /* Recognize escape sequences. */ \ |
| if (ch == ESC) \ |
| { \ |
| /* There are three kinds of escape sequences we have to handle: \ |
| - those announcing the use of GB and CNS characters on the \ |
| line; we can simply ignore them \ |
| - the initial byte of the SS2 sequence. \ |
| - the initial byte of the SS3 sequence. \ |
| */ \ |
| if (inptr + 2 > inend \ |
| || (inptr[1] == '$' \ |
| && (inptr + 3 > inend \ |
| || (inptr[2] == ')' && inptr + 4 > inend) \ |
| || (inptr[2] == '*' && inptr + 4 > inend) \ |
| || (inptr[2] == '+' && inptr + 4 > inend))) \ |
| || (inptr[1] == SS2_1 && inptr + 4 > inend) \ |
| || (inptr[1] == SS3_1 && inptr + 4 > inend)) \ |
| { \ |
| result = __GCONV_INCOMPLETE_INPUT; \ |
| break; \ |
| } \ |
| if (inptr[1] == '$' \ |
| && ((inptr[2] == ')' \ |
| && (inptr[3] == 'A' \ |
| || (X12345 != '\0' && inptr[3] == X12345) \ |
| || inptr[3] == 'E' || inptr[3] == 'G')) \ |
| || (inptr[2] == '*' \ |
| && ((X7589 != '\0' && inptr[3] == X7589) \ |
| || (X13131 != '\0' && inptr[3] == X13131) \ |
| || inptr[3] == 'H')) \ |
| || (inptr[2] == '+' \ |
| && ((X7590 != '\0' && inptr[3] == X7590) \ |
| || (X13132 != '\0' && inptr[3] == X13132) \ |
| || inptr[3] == 'I' || inptr[3] == 'J' \ |
| || inptr[3] == 'K' || inptr[3] == 'L' \ |
| || inptr[3] == 'M')))) \ |
| { \ |
| /* OK, we accept those character sets. */ \ |
| if (inptr[3] == 'A') \ |
| ann = (ann & ~SO_ann) | GB2312_ann; \ |
| else if (inptr[3] == 'G') \ |
| ann = (ann & ~SO_ann) | CNS11643_1_ann; \ |
| else if (inptr[3] == 'E') \ |
| ann = (ann & ~SO_ann) | ISO_IR_165_ann; \ |
| else if (X12345 != '\0' && inptr[3] == X12345) \ |
| ann = (ann & ~SO_ann) | GB12345_ann; \ |
| else if (inptr[3] == 'H') \ |
| ann = (ann & ~SS2_ann) | CNS11643_2_ann; \ |
| else if (X7589 != '\0' && inptr[3] == X7589) \ |
| ann = (ann & ~SS2_ann) | GB7589_ann; \ |
| else if (X13131 != '\0' && inptr[3] == X13131) \ |
| ann = (ann & ~SS2_ann) | GB13131_ann; \ |
| else if (inptr[3] == 'I') \ |
| ann = (ann & ~SS3_ann) | CNS11643_3_ann; \ |
| else if (inptr[3] == 'J') \ |
| ann = (ann & ~SS3_ann) | CNS11643_4_ann; \ |
| else if (inptr[3] == 'K') \ |
| ann = (ann & ~SS3_ann) | CNS11643_5_ann; \ |
| else if (inptr[3] == 'L') \ |
| ann = (ann & ~SS3_ann) | CNS11643_6_ann; \ |
| else if (inptr[3] == 'M') \ |
| ann = (ann & ~SS3_ann) | CNS11643_7_ann; \ |
| else if (X7590 != '\0' && inptr[3] == X7590) \ |
| ann = (ann & ~SS3_ann) | GB7590_ann; \ |
| else if (X13132 != '\0' && inptr[3] == X13132) \ |
| ann = (ann & ~SS3_ann) | GB13132_ann; \ |
| inptr += 4; \ |
| continue; \ |
| } \ |
| } \ |
| else if (ch == SO) \ |
| { \ |
| /* Switch to use GB2312, GB12345, CNS 11643 plane 1, or ISO-IR-165, \ |
| depending on which S0 designation came last. The only problem \ |
| is what to do with faulty input files where no designator came. \ |
| XXX For now I'll default to use GB2312. If this is not the \ |
| best behavior (e.g., we should flag an error) let me know. */ \ |
| ++inptr; \ |
| if ((ann & SO_ann) != 0) \ |
| switch (ann & SO_ann) \ |
| { \ |
| case GB2312_ann: \ |
| set = GB2312_set; \ |
| break; \ |
| case GB12345_ann: \ |
| set = GB12345_set; \ |
| break; \ |
| case CNS11643_1_ann: \ |
| set = CNS11643_1_set; \ |
| break; \ |
| case ISO_IR_165_ann: \ |
| set = ISO_IR_165_set; \ |
| break; \ |
| default: \ |
| abort (); \ |
| } \ |
| else \ |
| { \ |
| STANDARD_FROM_LOOP_ERR_HANDLER (1); \ |
| } \ |
| continue; \ |
| } \ |
| else if (ch == SI) \ |
| { \ |
| /* Switch to use ASCII. */ \ |
| ++inptr; \ |
| set = ASCII_set; \ |
| continue; \ |
| } \ |
| \ |
| if (ch == ESC && inptr[1] == SS2_1) \ |
| { \ |
| /* This is a character from CNS 11643 plane 2. \ |
| XXX We could test here whether the use of this character \ |
| set was announced. \ |
| XXX Currently GB7589 and GB13131 are not supported. */ \ |
| inptr += 2; \ |
| ch = cns11643l2_to_ucs4 (&inptr, 2, 0); \ |
| if (ch == __UNKNOWN_10646_CHAR) \ |
| STANDARD_FROM_LOOP_ERR_HANDLER (2); \ |
| } \ |
| /* Note that we can assume here that at least 4 bytes are available if \ |
| the first byte is ESC since otherwise the first if would have been \ |
| true. */ \ |
| else if (ch == ESC && inptr[1] == SS3_1) \ |
| { \ |
| /* This is a character from CNS 11643 plane 3 or higher. \ |
| XXX Currently GB7590 and GB13132 are not supported. */ \ |
| unsigned char buf[3]; \ |
| const unsigned char *tmp = buf; \ |
| \ |
| buf[1] = inptr[2]; \ |
| buf[2] = inptr[3]; \ |
| switch (ann & SS3_ann) \ |
| { \ |
| case CNS11643_3_ann: \ |
| buf[0] = 0x23; \ |
| ch = cns11643_to_ucs4 (&tmp, 3, 0); \ |
| break; \ |
| case CNS11643_4_ann: \ |
| buf[0] = 0x24; \ |
| ch = cns11643_to_ucs4 (&tmp, 3, 0); \ |
| break; \ |
| case CNS11643_5_ann: \ |
| buf[0] = 0x25; \ |
| ch = cns11643_to_ucs4 (&tmp, 3, 0); \ |
| break; \ |
| case CNS11643_6_ann: \ |
| buf[0] = 0x26; \ |
| ch = cns11643_to_ucs4 (&tmp, 3, 0); \ |
| break; \ |
| case CNS11643_7_ann: \ |
| buf[0] = 0x27; \ |
| ch = cns11643_to_ucs4 (&tmp, 3, 0); \ |
| break; \ |
| default: \ |
| /* XXX Currently GB7590 and GB13132 are not supported. */ \ |
| ch = __UNKNOWN_10646_CHAR; \ |
| break; \ |
| } \ |
| if (ch == __UNKNOWN_10646_CHAR) \ |
| { \ |
| STANDARD_FROM_LOOP_ERR_HANDLER (4); \ |
| } \ |
| assert (tmp == buf + 3); \ |
| inptr += 4; \ |
| } \ |
| else if (set == ASCII_set) \ |
| { \ |
| /* Almost done, just advance the input pointer. */ \ |
| ++inptr; \ |
| } \ |
| else \ |
| { \ |
| /* That's pretty easy, we have a dedicated functions for this. */ \ |
| if (inend - inptr < 2) \ |
| { \ |
| result = __GCONV_INCOMPLETE_INPUT; \ |
| break; \ |
| } \ |
| if (set == GB2312_set) \ |
| ch = gb2312_to_ucs4 (&inptr, inend - inptr, 0); \ |
| else if (set == ISO_IR_165_set) \ |
| ch = isoir165_to_ucs4 (&inptr, inend - inptr); \ |
| else \ |
| { \ |
| assert (set == CNS11643_1_set); \ |
| ch = cns11643l1_to_ucs4 (&inptr, inend - inptr, 0); \ |
| } \ |
| \ |
| if (ch == 0) \ |
| { \ |
| result = __GCONV_INCOMPLETE_INPUT; \ |
| break; \ |
| } \ |
| else if (ch == __UNKNOWN_10646_CHAR) \ |
| { \ |
| STANDARD_FROM_LOOP_ERR_HANDLER (2); \ |
| } \ |
| } \ |
| \ |
| *((uint32_t *) outptr) = ch; \ |
| outptr += sizeof (uint32_t); \ |
| } |
| #define EXTRA_LOOP_DECLS , int *setp |
| #define INIT_PARAMS int set = (*setp >> 3) & CURRENT_MASK; \ |
| int ann = (*setp >> 3) & ~CURRENT_MASK |
| #define UPDATE_PARAMS *setp = (set | ann) << 3 |
| #define LOOP_NEED_FLAGS |
| #include <iconv/loop.c> |
| |
| |
| /* Next, define the other direction. */ |
| #define MIN_NEEDED_INPUT TO_LOOP_MIN_NEEDED_FROM |
| #define MAX_NEEDED_INPUT TO_LOOP_MAX_NEEDED_FROM |
| #define MIN_NEEDED_OUTPUT TO_LOOP_MIN_NEEDED_TO |
| #define MAX_NEEDED_OUTPUT TO_LOOP_MAX_NEEDED_TO |
| #define LOOPFCT TO_LOOP |
| #define BODY \ |
| { \ |
| uint32_t ch; \ |
| size_t written = 0; \ |
| \ |
| ch = *((const uint32_t *) inptr); \ |
| \ |
| /* First see whether we can write the character using the currently \ |
| selected character set. */ \ |
| if (ch < 0x80) \ |
| { \ |
| if (set != ASCII_set) \ |
| { \ |
| *outptr++ = SI; \ |
| set = ASCII_set; \ |
| if (outptr == outend) \ |
| { \ |
| result = __GCONV_FULL_OUTPUT; \ |
| break; \ |
| } \ |
| } \ |
| \ |
| *outptr++ = ch; \ |
| written = 1; \ |
| \ |
| /* At the end of the line we have to clear the `ann' flags since \ |
| every line must contain this information again. */ \ |
| if (ch == L'\n') \ |
| ann = 0; \ |
| } \ |
| else \ |
| { \ |
| unsigned char buf[2] = { 0, 0 }; \ |
| int used; \ |
| \ |
| if (set == GB2312_set || ((ann & SO_ann) != CNS11643_1_ann \ |
| && (ann & SO_ann) != ISO_IR_165_ann)) \ |
| { \ |
| written = ucs4_to_gb2312 (ch, buf, 2); \ |
| used = GB2312_set; \ |
| } \ |
| else if (set == ISO_IR_165_set || (ann & SO_ann) == ISO_IR_165_set) \ |
| { \ |
| written = ucs4_to_isoir165 (ch, buf, 2); \ |
| used = ISO_IR_165_set; \ |
| } \ |
| else \ |
| { \ |
| written = ucs4_to_cns11643l1 (ch, buf, 2); \ |
| used = CNS11643_1_set; \ |
| } \ |
| \ |
| if (written == __UNKNOWN_10646_CHAR) \ |
| { \ |
| /* Cannot convert it using the currently selected SO set. \ |
| Next try the SS2 set. */ \ |
| written = ucs4_to_cns11643l2 (ch, buf, 2); \ |
| if (written != __UNKNOWN_10646_CHAR) \ |
| /* Yep, that worked. */ \ |
| used = CNS11643_2_set; \ |
| else \ |
| { \ |
| unsigned char tmpbuf[3]; \ |
| \ |
| switch (0) \ |
| { \ |
| default: \ |
| /* Well, see whether we have to change the SO set. */ \ |
| \ |
| if (used != GB2312_set) \ |
| { \ |
| written = ucs4_to_gb2312 (ch, buf, 2); \ |
| if (written != __UNKNOWN_10646_CHAR) \ |
| { \ |
| used = GB2312_set; \ |
| break; \ |
| } \ |
| } \ |
| \ |
| if (used != ISO_IR_165_set) \ |
| { \ |
| written = ucs4_to_isoir165 (ch, buf, 2); \ |
| if (written != __UNKNOWN_10646_CHAR) \ |
| { \ |
| used = ISO_IR_165_set; \ |
| break; \ |
| } \ |
| } \ |
| \ |
| if (used != CNS11643_1_set) \ |
| { \ |
| written = ucs4_to_cns11643l1 (ch, buf, 2); \ |
| if (written != __UNKNOWN_10646_CHAR) \ |
| { \ |
| used = CNS11643_1_set; \ |
| break; \ |
| } \ |
| } \ |
| \ |
| written = ucs4_to_cns11643 (ch, tmpbuf, 3); \ |
| if (written == 3 && tmpbuf[0] >= 3 && tmpbuf[0] <= 7) \ |
| { \ |
| buf[0] = tmpbuf[1]; \ |
| buf[1] = tmpbuf[2]; \ |
| switch (tmpbuf[0]) \ |
| { \ |
| case 3: \ |
| used = CNS11643_3_set; \ |
| break; \ |
| case 4: \ |
| used = CNS11643_4_set; \ |
| break; \ |
| case 5: \ |
| used = CNS11643_5_set; \ |
| break; \ |
| case 6: \ |
| used = CNS11643_6_set; \ |
| break; \ |
| case 7: \ |
| used = CNS11643_7_set; \ |
| break; \ |
| default: \ |
| abort (); \ |
| } \ |
| written = 2; \ |
| break; \ |
| } \ |
| \ |
| /* XXX Currently GB7590 and GB13132 are not supported. */\ |
| \ |
| /* Even this does not work. Error. */ \ |
| used = ASCII_set; \ |
| } \ |
| if (used == ASCII_set) \ |
| { \ |
| UNICODE_TAG_HANDLER (ch, 4); \ |
| STANDARD_TO_LOOP_ERR_HANDLER (4); \ |
| } \ |
| } \ |
| } \ |
| assert (written == 2); \ |
| \ |
| /* See whether we have to emit an escape sequence. */ \ |
| if (set != used) \ |
| { \ |
| /* First see whether we announced that we use this \ |
| character set. */ \ |
| if ((used & SO_mask) != 0 && (ann & SO_ann) != (used << 8)) \ |
| { \ |
| const char *escseq; \ |
| \ |
| if (outptr + 4 > outend) \ |
| { \ |
| result = __GCONV_FULL_OUTPUT; \ |
| break; \ |
| } \ |
| \ |
| assert (used >= 1 && used <= 4); \ |
| escseq = ")A\0\0)G)E" + (used - 1) * 2; \ |
| *outptr++ = ESC; \ |
| *outptr++ = '$'; \ |
| *outptr++ = *escseq++; \ |
| *outptr++ = *escseq++; \ |
| \ |
| ann = (ann & ~SO_ann) | (used << 8); \ |
| } \ |
| else if ((used & SS2_mask) != 0 && (ann & SS2_ann) != (used << 8))\ |
| { \ |
| const char *escseq; \ |
| \ |
| assert (used == CNS11643_2_set); /* XXX */ \ |
| escseq = "*H"; \ |
| *outptr++ = ESC; \ |
| *outptr++ = '$'; \ |
| *outptr++ = *escseq++; \ |
| *outptr++ = *escseq++; \ |
| \ |
| ann = (ann & ~SS2_ann) | (used << 8); \ |
| } \ |
| else if ((used & SS3_mask) != 0 && (ann & SS3_ann) != (used << 8))\ |
| { \ |
| const char *escseq; \ |
| \ |
| assert ((used >> 5) >= 3 && (used >> 5) <= 7); \ |
| escseq = "+I+J+K+L+M" + ((used >> 5) - 3) * 2; \ |
| *outptr++ = ESC; \ |
| *outptr++ = '$'; \ |
| *outptr++ = *escseq++; \ |
| *outptr++ = *escseq++; \ |
| \ |
| ann = (ann & ~SS3_ann) | (used << 8); \ |
| } \ |
| \ |
| if (used == CNS11643_2_set) \ |
| { \ |
| if (outptr + 2 > outend) \ |
| { \ |
| result = __GCONV_FULL_OUTPUT; \ |
| break; \ |
| } \ |
| *outptr++ = SS2_0; \ |
| *outptr++ = SS2_1; \ |
| } \ |
| else if (used >= CNS11643_3_set && used <= CNS11643_7_set) \ |
| { \ |
| if (outptr + 2 > outend) \ |
| { \ |
| result = __GCONV_FULL_OUTPUT; \ |
| break; \ |
| } \ |
| *outptr++ = SS3_0; \ |
| *outptr++ = SS3_1; \ |
| } \ |
| else \ |
| { \ |
| /* We only have to emit something if currently ASCII is \ |
| selected. Otherwise we are switching within the \ |
| SO charset. */ \ |
| if (set == ASCII_set) \ |
| { \ |
| if (outptr + 1 > outend) \ |
| { \ |
| result = __GCONV_FULL_OUTPUT; \ |
| break; \ |
| } \ |
| *outptr++ = SO; \ |
| } \ |
| } \ |
| \ |
| /* Always test the length here since we have used up all the \ |
| guaranteed output buffer slots. */ \ |
| if (outptr + 2 > outend) \ |
| { \ |
| result = __GCONV_FULL_OUTPUT; \ |
| break; \ |
| } \ |
| } \ |
| else if (outptr + 2 > outend) \ |
| { \ |
| result = __GCONV_FULL_OUTPUT; \ |
| break; \ |
| } \ |
| \ |
| *outptr++ = buf[0]; \ |
| *outptr++ = buf[1]; \ |
| set = used; \ |
| } \ |
| \ |
| /* Now that we wrote the output increment the input pointer. */ \ |
| inptr += 4; \ |
| } |
| #define EXTRA_LOOP_DECLS , int *setp |
| #define INIT_PARAMS int set = (*setp >> 3) & CURRENT_MASK; \ |
| int ann = (*setp >> 3) & ~CURRENT_MASK |
| #define REINIT_PARAMS do \ |
| { \ |
| set = (*setp >> 3) & CURRENT_MASK; \ |
| ann = (*setp >> 3) & ~CURRENT_MASK; \ |
| } \ |
| while (0) |
| #define UPDATE_PARAMS *setp = (set | ann) << 3 |
| #define LOOP_NEED_FLAGS |
| #include <iconv/loop.c> |
| |
| |
| /* Now define the toplevel functions. */ |
| #include <iconv/skeleton.c> |