|  | /* | 
|  | * Broadcom BCM63xx SPI controller support | 
|  | * | 
|  | * Copyright (C) 2009-2012 Florian Fainelli <florian@openwrt.org> | 
|  | * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * as published by the Free Software Foundation; either version 2 | 
|  | * of the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the | 
|  | * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/completion.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/pm_runtime.h> | 
|  |  | 
|  | #include <bcm63xx_dev_spi.h> | 
|  |  | 
|  | #define PFX		KBUILD_MODNAME | 
|  | #define DRV_VER		"0.1.2" | 
|  |  | 
|  | struct bcm63xx_spi { | 
|  | struct completion	done; | 
|  |  | 
|  | void __iomem		*regs; | 
|  | int			irq; | 
|  |  | 
|  | /* Platform data */ | 
|  | u32			speed_hz; | 
|  | unsigned		fifo_size; | 
|  |  | 
|  | /* Data buffers */ | 
|  | const unsigned char	*tx_ptr; | 
|  | unsigned char		*rx_ptr; | 
|  |  | 
|  | /* data iomem */ | 
|  | u8 __iomem		*tx_io; | 
|  | const u8 __iomem	*rx_io; | 
|  |  | 
|  | int			remaining_bytes; | 
|  |  | 
|  | struct clk		*clk; | 
|  | struct platform_device	*pdev; | 
|  | }; | 
|  |  | 
|  | static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs, | 
|  | unsigned int offset) | 
|  | { | 
|  | return bcm_readb(bs->regs + bcm63xx_spireg(offset)); | 
|  | } | 
|  |  | 
|  | static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs, | 
|  | unsigned int offset) | 
|  | { | 
|  | return bcm_readw(bs->regs + bcm63xx_spireg(offset)); | 
|  | } | 
|  |  | 
|  | static inline void bcm_spi_writeb(struct bcm63xx_spi *bs, | 
|  | u8 value, unsigned int offset) | 
|  | { | 
|  | bcm_writeb(value, bs->regs + bcm63xx_spireg(offset)); | 
|  | } | 
|  |  | 
|  | static inline void bcm_spi_writew(struct bcm63xx_spi *bs, | 
|  | u16 value, unsigned int offset) | 
|  | { | 
|  | bcm_writew(value, bs->regs + bcm63xx_spireg(offset)); | 
|  | } | 
|  |  | 
|  | static const unsigned bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = { | 
|  | { 20000000, SPI_CLK_20MHZ }, | 
|  | { 12500000, SPI_CLK_12_50MHZ }, | 
|  | {  6250000, SPI_CLK_6_250MHZ }, | 
|  | {  3125000, SPI_CLK_3_125MHZ }, | 
|  | {  1563000, SPI_CLK_1_563MHZ }, | 
|  | {   781000, SPI_CLK_0_781MHZ }, | 
|  | {   391000, SPI_CLK_0_391MHZ } | 
|  | }; | 
|  |  | 
|  | static int bcm63xx_spi_check_transfer(struct spi_device *spi, | 
|  | struct spi_transfer *t) | 
|  | { | 
|  | u8 bits_per_word; | 
|  |  | 
|  | bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word; | 
|  | if (bits_per_word != 8) { | 
|  | dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", | 
|  | __func__, bits_per_word); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (spi->chip_select > spi->master->num_chipselect) { | 
|  | dev_err(&spi->dev, "%s, unsupported slave %d\n", | 
|  | __func__, spi->chip_select); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void bcm63xx_spi_setup_transfer(struct spi_device *spi, | 
|  | struct spi_transfer *t) | 
|  | { | 
|  | struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); | 
|  | u32 hz; | 
|  | u8 clk_cfg, reg; | 
|  | int i; | 
|  |  | 
|  | hz = (t) ? t->speed_hz : spi->max_speed_hz; | 
|  |  | 
|  | /* Find the closest clock configuration */ | 
|  | for (i = 0; i < SPI_CLK_MASK; i++) { | 
|  | if (hz <= bcm63xx_spi_freq_table[i][0]) { | 
|  | clk_cfg = bcm63xx_spi_freq_table[i][1]; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* No matching configuration found, default to lowest */ | 
|  | if (i == SPI_CLK_MASK) | 
|  | clk_cfg = SPI_CLK_0_391MHZ; | 
|  |  | 
|  | /* clear existing clock configuration bits of the register */ | 
|  | reg = bcm_spi_readb(bs, SPI_CLK_CFG); | 
|  | reg &= ~SPI_CLK_MASK; | 
|  | reg |= clk_cfg; | 
|  |  | 
|  | bcm_spi_writeb(bs, reg, SPI_CLK_CFG); | 
|  | dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n", | 
|  | clk_cfg, hz); | 
|  | } | 
|  |  | 
|  | /* the spi->mode bits understood by this driver: */ | 
|  | #define MODEBITS (SPI_CPOL | SPI_CPHA) | 
|  |  | 
|  | static int bcm63xx_spi_setup(struct spi_device *spi) | 
|  | { | 
|  | struct bcm63xx_spi *bs; | 
|  | int ret; | 
|  |  | 
|  | bs = spi_master_get_devdata(spi->master); | 
|  |  | 
|  | if (!spi->bits_per_word) | 
|  | spi->bits_per_word = 8; | 
|  |  | 
|  | if (spi->mode & ~MODEBITS) { | 
|  | dev_err(&spi->dev, "%s, unsupported mode bits %x\n", | 
|  | __func__, spi->mode & ~MODEBITS); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ret = bcm63xx_spi_check_transfer(spi, NULL); | 
|  | if (ret < 0) { | 
|  | dev_err(&spi->dev, "setup: unsupported mode bits %x\n", | 
|  | spi->mode & ~MODEBITS); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n", | 
|  | __func__, spi->mode & MODEBITS, spi->bits_per_word, 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Fill the TX FIFO with as many bytes as possible */ | 
|  | static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs) | 
|  | { | 
|  | u8 size; | 
|  |  | 
|  | /* Fill the Tx FIFO with as many bytes as possible */ | 
|  | size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes : | 
|  | bs->fifo_size; | 
|  | memcpy_toio(bs->tx_io, bs->tx_ptr, size); | 
|  | bs->remaining_bytes -= size; | 
|  | } | 
|  |  | 
|  | static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi, | 
|  | struct spi_transfer *t) | 
|  | { | 
|  | struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); | 
|  | u16 msg_ctl; | 
|  | u16 cmd; | 
|  |  | 
|  | /* Disable the CMD_DONE interrupt */ | 
|  | bcm_spi_writeb(bs, 0, SPI_INT_MASK); | 
|  |  | 
|  | dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", | 
|  | t->tx_buf, t->rx_buf, t->len); | 
|  |  | 
|  | /* Transmitter is inhibited */ | 
|  | bs->tx_ptr = t->tx_buf; | 
|  | bs->rx_ptr = t->rx_buf; | 
|  |  | 
|  | if (t->tx_buf) { | 
|  | bs->remaining_bytes = t->len; | 
|  | bcm63xx_spi_fill_tx_fifo(bs); | 
|  | } | 
|  |  | 
|  | init_completion(&bs->done); | 
|  |  | 
|  | /* Fill in the Message control register */ | 
|  | msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT); | 
|  |  | 
|  | if (t->rx_buf && t->tx_buf) | 
|  | msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT); | 
|  | else if (t->rx_buf) | 
|  | msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT); | 
|  | else if (t->tx_buf) | 
|  | msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT); | 
|  |  | 
|  | bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); | 
|  |  | 
|  | /* Issue the transfer */ | 
|  | cmd = SPI_CMD_START_IMMEDIATE; | 
|  | cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); | 
|  | cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT); | 
|  | bcm_spi_writew(bs, cmd, SPI_CMD); | 
|  |  | 
|  | /* Enable the CMD_DONE interrupt */ | 
|  | bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); | 
|  |  | 
|  | return t->len - bs->remaining_bytes; | 
|  | } | 
|  |  | 
|  | static int bcm63xx_spi_prepare_transfer(struct spi_master *master) | 
|  | { | 
|  | struct bcm63xx_spi *bs = spi_master_get_devdata(master); | 
|  |  | 
|  | pm_runtime_get_sync(&bs->pdev->dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bcm63xx_spi_unprepare_transfer(struct spi_master *master) | 
|  | { | 
|  | struct bcm63xx_spi *bs = spi_master_get_devdata(master); | 
|  |  | 
|  | pm_runtime_put(&bs->pdev->dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bcm63xx_spi_transfer_one(struct spi_master *master, | 
|  | struct spi_message *m) | 
|  | { | 
|  | struct bcm63xx_spi *bs = spi_master_get_devdata(master); | 
|  | struct spi_transfer *t; | 
|  | struct spi_device *spi = m->spi; | 
|  | int status = 0; | 
|  | unsigned int timeout = 0; | 
|  |  | 
|  | list_for_each_entry(t, &m->transfers, transfer_list) { | 
|  | unsigned int len = t->len; | 
|  | u8 rx_tail; | 
|  |  | 
|  | status = bcm63xx_spi_check_transfer(spi, t); | 
|  | if (status < 0) | 
|  | goto exit; | 
|  |  | 
|  | /* configure adapter for a new transfer */ | 
|  | bcm63xx_spi_setup_transfer(spi, t); | 
|  |  | 
|  | while (len) { | 
|  | /* send the data */ | 
|  | len -= bcm63xx_txrx_bufs(spi, t); | 
|  |  | 
|  | timeout = wait_for_completion_timeout(&bs->done, HZ); | 
|  | if (!timeout) { | 
|  | status = -ETIMEDOUT; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | /* read out all data */ | 
|  | rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL); | 
|  |  | 
|  | /* Read out all the data */ | 
|  | if (rx_tail) | 
|  | memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail); | 
|  | } | 
|  |  | 
|  | m->actual_length += t->len; | 
|  | } | 
|  | exit: | 
|  | m->status = status; | 
|  | spi_finalize_current_message(master); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* This driver supports single master mode only. Hence | 
|  | * CMD_DONE is the only interrupt we care about | 
|  | */ | 
|  | static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id) | 
|  | { | 
|  | struct spi_master *master = (struct spi_master *)dev_id; | 
|  | struct bcm63xx_spi *bs = spi_master_get_devdata(master); | 
|  | u8 intr; | 
|  |  | 
|  | /* Read interupts and clear them immediately */ | 
|  | intr = bcm_spi_readb(bs, SPI_INT_STATUS); | 
|  | bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); | 
|  | bcm_spi_writeb(bs, 0, SPI_INT_MASK); | 
|  |  | 
|  | /* A transfer completed */ | 
|  | if (intr & SPI_INTR_CMD_DONE) | 
|  | complete(&bs->done); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct resource *r; | 
|  | struct device *dev = &pdev->dev; | 
|  | struct bcm63xx_spi_pdata *pdata = pdev->dev.platform_data; | 
|  | int irq; | 
|  | struct spi_master *master; | 
|  | struct clk *clk; | 
|  | struct bcm63xx_spi *bs; | 
|  | int ret; | 
|  |  | 
|  | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!r) { | 
|  | dev_err(dev, "no iomem\n"); | 
|  | ret = -ENXIO; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | if (irq < 0) { | 
|  | dev_err(dev, "no irq\n"); | 
|  | ret = -ENXIO; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | clk = clk_get(dev, "spi"); | 
|  | if (IS_ERR(clk)) { | 
|  | dev_err(dev, "no clock for device\n"); | 
|  | ret = PTR_ERR(clk); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | master = spi_alloc_master(dev, sizeof(*bs)); | 
|  | if (!master) { | 
|  | dev_err(dev, "out of memory\n"); | 
|  | ret = -ENOMEM; | 
|  | goto out_clk; | 
|  | } | 
|  |  | 
|  | bs = spi_master_get_devdata(master); | 
|  |  | 
|  | platform_set_drvdata(pdev, master); | 
|  | bs->pdev = pdev; | 
|  |  | 
|  | if (!devm_request_mem_region(&pdev->dev, r->start, | 
|  | resource_size(r), PFX)) { | 
|  | dev_err(dev, "iomem request failed\n"); | 
|  | ret = -ENXIO; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | bs->regs = devm_ioremap_nocache(&pdev->dev, r->start, | 
|  | resource_size(r)); | 
|  | if (!bs->regs) { | 
|  | dev_err(dev, "unable to ioremap regs\n"); | 
|  | ret = -ENOMEM; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | bs->irq = irq; | 
|  | bs->clk = clk; | 
|  | bs->fifo_size = pdata->fifo_size; | 
|  |  | 
|  | ret = devm_request_irq(&pdev->dev, irq, bcm63xx_spi_interrupt, 0, | 
|  | pdev->name, master); | 
|  | if (ret) { | 
|  | dev_err(dev, "unable to request irq\n"); | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | master->bus_num = pdata->bus_num; | 
|  | master->num_chipselect = pdata->num_chipselect; | 
|  | master->setup = bcm63xx_spi_setup; | 
|  | master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer; | 
|  | master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer; | 
|  | master->transfer_one_message = bcm63xx_spi_transfer_one; | 
|  | master->mode_bits = MODEBITS; | 
|  | bs->speed_hz = pdata->speed_hz; | 
|  | bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); | 
|  | bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); | 
|  |  | 
|  | /* Initialize hardware */ | 
|  | clk_enable(bs->clk); | 
|  | bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); | 
|  |  | 
|  | /* register and we are done */ | 
|  | ret = spi_register_master(master); | 
|  | if (ret) { | 
|  | dev_err(dev, "spi register failed\n"); | 
|  | goto out_clk_disable; | 
|  | } | 
|  |  | 
|  | dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d) v%s\n", | 
|  | r->start, irq, bs->fifo_size, DRV_VER); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_clk_disable: | 
|  | clk_disable(clk); | 
|  | out_err: | 
|  | platform_set_drvdata(pdev, NULL); | 
|  | spi_master_put(master); | 
|  | out_clk: | 
|  | clk_put(clk); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __devexit bcm63xx_spi_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct spi_master *master = platform_get_drvdata(pdev); | 
|  | struct bcm63xx_spi *bs = spi_master_get_devdata(master); | 
|  |  | 
|  | spi_unregister_master(master); | 
|  |  | 
|  | /* reset spi block */ | 
|  | bcm_spi_writeb(bs, 0, SPI_INT_MASK); | 
|  |  | 
|  | /* HW shutdown */ | 
|  | clk_disable(bs->clk); | 
|  | clk_put(bs->clk); | 
|  |  | 
|  | platform_set_drvdata(pdev, 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int bcm63xx_spi_suspend(struct device *dev) | 
|  | { | 
|  | struct spi_master *master = | 
|  | platform_get_drvdata(to_platform_device(dev)); | 
|  | struct bcm63xx_spi *bs = spi_master_get_devdata(master); | 
|  |  | 
|  | clk_disable(bs->clk); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bcm63xx_spi_resume(struct device *dev) | 
|  | { | 
|  | struct spi_master *master = | 
|  | platform_get_drvdata(to_platform_device(dev)); | 
|  | struct bcm63xx_spi *bs = spi_master_get_devdata(master); | 
|  |  | 
|  | clk_enable(bs->clk); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct dev_pm_ops bcm63xx_spi_pm_ops = { | 
|  | .suspend	= bcm63xx_spi_suspend, | 
|  | .resume		= bcm63xx_spi_resume, | 
|  | }; | 
|  |  | 
|  | #define BCM63XX_SPI_PM_OPS	(&bcm63xx_spi_pm_ops) | 
|  | #else | 
|  | #define BCM63XX_SPI_PM_OPS	NULL | 
|  | #endif | 
|  |  | 
|  | static struct platform_driver bcm63xx_spi_driver = { | 
|  | .driver = { | 
|  | .name	= "bcm63xx-spi", | 
|  | .owner	= THIS_MODULE, | 
|  | .pm	= BCM63XX_SPI_PM_OPS, | 
|  | }, | 
|  | .probe		= bcm63xx_spi_probe, | 
|  | .remove		= __devexit_p(bcm63xx_spi_remove), | 
|  | }; | 
|  |  | 
|  | module_platform_driver(bcm63xx_spi_driver); | 
|  |  | 
|  | MODULE_ALIAS("platform:bcm63xx_spi"); | 
|  | MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); | 
|  | MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>"); | 
|  | MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver"); | 
|  | MODULE_LICENSE("GPL"); |