[Bugfix][T106BUG-42]the fixture is powered on without usb port
Change-Id: I1a777f11e620023166e036d9649007fb04f05723
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-zx297520v3/zx297520v3-mdl-devices.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-zx297520v3/zx297520v3-mdl-devices.c
index 7134e18..d3165a9 100644
--- a/ap/os/linux/linux-3.4.x/arch/arm/mach-zx297520v3/zx297520v3-mdl-devices.c
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-zx297520v3/zx297520v3-mdl-devices.c
@@ -948,7 +948,7 @@
static struct gpio_keys_button zx29_keypad_int[] = {
#if 1
{
- .active_low = 1, /*ÊÇ·ñµÍµçƽÓÐЧ¡£1: °´ÏÂΪµÍµçƽ 0: °´ÏÂΪ¸ßµçƽ*/
+ .active_low = 1, /*\CAǷ\F1\B5͵\E7ƽ\D3\D0Ч\A1\A31: \B0\B4\CF\C2Ϊ\B5͵\E7ƽ 0: \B0\B4\CF\C2Ϊ\B8ߵ\E7ƽ*/
.desc = "kpd_power",
.code = KEY_POWER /* power: 116 */,
.use_pmu_pwron = 1, /*true: use pmu pwron interrupt fase: use zx297520v2 ext int*/
@@ -1486,11 +1486,15 @@
/*
*i2c devices on bus 1
*/
+//xf.li@20230626 add for T106BUG-26 start
+#if 0
devices_num = ARRAY_SIZE(zx29_i2c1_devices);
if (devices_num){
ret = i2c_register_board_info(1,zx29_i2c1_devices, devices_num);
if(ret)
BUG();
}
+#endif
+//xf.li@20230626 add for T106BUG-26 end
}
#endif
diff --git a/ap/project/zx297520v3/prj_vehicle_dc/config/normal/config.linux b/ap/project/zx297520v3/prj_vehicle_dc/config/normal/config.linux
index 37a50ac..1d95ab8 100755
--- a/ap/project/zx297520v3/prj_vehicle_dc/config/normal/config.linux
+++ b/ap/project/zx297520v3/prj_vehicle_dc/config/normal/config.linux
@@ -1397,93 +1397,8 @@
# CONFIG_FB is not set
# CONFIG_EXYNOS_VIDEO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-#xf.li@20230428 add for codec start
-CONFIG_SOUND=y
+#CONFIG_SOUND is not set
-# CONFIG_SOUND_OSS_CORE is not set
-
-CONFIG_SND=y
-
-CONFIG_SND_TIMER=y
-
-CONFIG_SND_PCM=y
-
-CONFIG_SND_JACK=y
-
-# CONFIG_SND_SEQUENCER is not set
-
-# CONFIG_SND_MIXER_OSS is not set
-
-# CONFIG_SND_PCM_OSS is not set
-
-# CONFIG_SND_HRTIMER is not set
-
-# CONFIG_SND_DYNAMIC_MINORS is not set
-
-CONFIG_SND_SUPPORT_OLD_API=y
-
-CONFIG_SND_VERBOSE_PROCFS=y
-
-# CONFIG_SND_VERBOSE_PRINTK is not set
-
-# CONFIG_SND_DEBUG is not set
-
-# CONFIG_SND_RAWMIDI_SEQ is not set
-
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-
-# CONFIG_SND_SBAWE_SEQ is not set
-
-# CONFIG_SND_EMU10K1_SEQ is not set
-
-CONFIG_SND_DRIVERS=y
-
-# CONFIG_SND_DUMMY is not set
-
-# CONFIG_SND_ALOOP is not set
-
-# CONFIG_SND_MTPAV is not set
-
-# CONFIG_SND_SERIAL_U16550 is not set
-
-# CONFIG_SND_MPU401 is not set
-
-CONFIG_SND_ARM=y
-
-CONFIG_SND_SPI=y
-
-CONFIG_SND_SOC=y
-
-CONFIG_SND_SOC_SANECHIPS=y
-
-# CONFIG_SND_SOC_ZX297520V3_TI3100 is not set
-
-CONFIG_SND_SOC_ZX297520V3_NAU8810=y
-
-# CONFIG_SND_SOC_ZX297520V3_ES8374 is not set
-
-# CONFIG_SND_SOC_ZX297520V3_ES8312 is not set
-
-CONFIG_SND_SOC_ZX_VOICE=y
-
-CONFIG_SND_SOC_ZX297520V3=y
-
-CONFIG_SND_SOC_ZX_I2S=y
-
-CONFIG_SND_SOC_ZX_PCM=y
-
-CONFIG_SND_SOC_NAU8810=y
-
-# CONFIG_SND_EXTRA_CTRL is not set
-
-CONFIG_SND_SOC_I2C_AND_SPI=y
-
-# CONFIG_SND_SOC_ALL_CODECS is not set
-
-# CONFIG_SOUND_PRIME is not set
-#xf.li@20230428 add for codec end
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set