[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/app/Script/etc/miniupnpd_temp.conf b/ap/app/Script/etc/miniupnpd_temp.conf
new file mode 100644
index 0000000..f12e4f7
--- /dev/null
+++ b/ap/app/Script/etc/miniupnpd_temp.conf
@@ -0,0 +1,101 @@
+# WAN network interface
+#ext_ifname=eth0
+ext_ifname=wan0
+# if the WAN interface has several IP addresses, you
+# can specify the one to use below
+#ext_ip=
+
+# LAN network interfaces IPs / networks
+# there can be multiple listening ips for SSDP traffic.
+# should be under the form nnn.nnn.nnn.nnn/nn
+# HTTP is available on all interfaces
+# When MULTIPLE_EXTERNAL_IP is enabled, the external ip
+# address associated with the subnet follows. for example :
+listening_ip=192.168.0.1
+# port for HTTP (descriptions and SOAP) traffic. set 0 for autoselect.
+port=5000
+
+# path to the unix socket used to communicate with MiniSSDPd
+# If running, MiniSSDPd will manage M-SEARCH answering.
+# default is /var/run/minissdpd.sock
+#minissdpdsocket=/var/run/minissdpd.sock
+
+# enable NAT-PMP support (default is no)
+#enable_natpmp=yes
+
+# enable UPNP support (default is yes)
+enable_upnp=yes
+
+# chain names for netfilter (not used for pf or ipf).
+# default is MINIUPNPD for both
+#upnp_forward_chain=forwardUPnP
+#upnp_nat_chain=UPnP
+
+# lease file location
+lease_file=/etc_rw/upnp.leases
+
+# bitrates reported by daemon in bits per second
+bitrate_up=1000000
+bitrate_down=10000000
+
+# "secure" mode : when enabled, UPnP client are allowed to add mappings only
+# to their IP.
+secure_mode=yes
+#secure_mode=no
+
+# default presentation url is http address on port 80
+# If set to an empty string, no presentationURL element will appear
+# in the XML description of the device, which prevents MS Windows
+# from displaying an icon in the "Network Connections" panel.
+#presentation_url=http://www.mylan/index.php
+
+# report system uptime instead of daemon uptime
+system_uptime=yes
+
+# notify interval in seconds. default is 30 seconds.
+#notify_interval=240
+notify_interval=30
+
+# unused rules cleaning.
+# never remove any rule before this threshold for the number
+# of redirections is exceeded. default to 20
+#clean_ruleset_threshold=10
+# clean process work interval in seconds. default to 0 (disabled).
+# a 600 seconds (10 minutes) interval makes sense
+clean_ruleset_interval=600
+
+# log packets in pf
+#packet_log=no
+
+# ALTQ queue in pf
+# filter rules must be used for this to be used.
+# compile with PF_ENABLE_FILTER_RULES (see config.h file)
+#queue=queue_name1
+
+# tag name in pf
+#tag=tag_name1
+
+# make filter rules in pf quick or not. default is yes
+# active when compiled with PF_ENABLE_FILTER_RULES (see config.h file)
+#quickrules=no
+
+# uuid : generate your own with "make genuuid"
+uuid=8c45af75-17c3-461c-8198-cfa836f4bc17
+
+# serial and model number the daemon will report to clients
+# in its XML description
+serial=12345678
+model_number=#device_name#
+
+# UPnP permission rules
+# (allow|deny) (external port range) ip/mask (internal port range)
+# A port range is <min port>-<max port> or <port> if there is only
+# one port in the range.
+# ip/mask format must be nn.nn.nn.nn/nn
+# it is advised to only allow redirection of port above 1024
+# and to finish the rule set with "deny 0-65535 0.0.0.0/0 0-65535"
+allow 1024-65535 #allow_ip#/24 1024-65535
+allow 1024-65535 192.168.0.0/23 22
+allow 12345 192.168.7.113/32 54321
+deny 0-65535 0.0.0.0/0 0-65535
+