commit 9ed821d7e5d875a3395740a9cc2545671fa429b7
author lh <lh@exm.com> Fri Apr 07 01:36:19 2023 -0700
committer lh <lh@exm.com> Fri Apr 07 01:36:19 2023 -0700
tree 121b5ff9a43e30066e3b33d57065b04bcf9bbabf
parent a10a76fcf09e2ec7e9055902f242dff467ab9654

[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit

Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b

ap/app/Script/scripts/lan.sh

diff --git a/ap/app/Script/scripts/lan.sh b/ap/app/Script/scripts/lan.sh
new file mode 100755
index 0000000..407c47b
--- /dev/null
+++ b/ap/app/Script/scripts/lan.sh
@@ -0,0 +1,145 @@
+#!/bin/sh
+#
+# $Id: lan.sh
+#
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+br_set()
+{
+    br_name=$lan_if
+
+    #ÉèÖÃÍøÇÅ
+    killall -9 udhcpd
+    echo "ifconfig $br_name down...................."
+    ifconfig $br_name down
+
+    echo "brctl delbr $br_name......................"
+    brctl delbr $br_name
+
+    echo "brctl addbr $br_name......................"
+    brctl addbr $br_name 2>>$test_log
+    if [ $? -ne 0 ];then
+        echo "Error: brctl addbr $br_name failed." >> $test_log
+    fi
+    echo "brctl setfd $br_name 0.1.................."
+    brctl setfd $br_name 0.1 2>>$test_log
+    if [ $? -ne 0 ];then
+        echo "Error: brctl setfd $br_name 0.1 failed." >> $test_log
+    fi
+    echo "ifconfig lo up......................."
+    ifconfig lo up 2>>$test_log
+    if [ $? -ne 0 ];then
+        echo "Error: ifconfig lo up failed." >> $test_log
+    fi
+    echo "ifconfig $br_name up......................"
+    ifconfig $br_name up 2>>$test_log
+    if [ $? -ne 0 ];then
+        echo "Error: ifconfig $br_name up failed." >> $test_log
+    fi
+
+    #´ò¿ªÍøÇŵØÖ·¸Ä±ä֪ͨµÄ¿ª¹Ø
+    echo 1 > /proc/sys/net/ipv4/conf/$br_name/arp_notify
+    
+    br_node=`nv get br_node`
+
+    #analysis br_node ex: usb0+wifi0+¡­
+    IFS_OLD=$IFS
+    IFS="+"
+    for device in $br_node
+    do
+        ifconfig $device up
+        
+        brctl addif $br_name $device 2>>$test_log
+        if [ $? -ne 0 ];then
+            echo "Error: brctl addif $br_name $device failed." >> $test_log
+        fi
+    done
+    IFS=$IFS_OLD
+    
+}
+
+lan_set()
+{
+    ip=`nv get lan_ipaddr`
+    nm=`nv get lan_netmask`
+    ifconfig $lan_if $ip netmask $nm 2>>$test_log
+    if [ $? -ne 0 ];then
+        echo "Error: ifconfig $lan_if $ip netmask $nm failed." >> $test_log
+    fi
+
+    webv6_enable=`nv get webv6_enable`
+    ipv6=`nv get lan_ipv6addr`
+    if [ "x$webv6_enable" == "x1" ]; then
+        ifconfig $lan_if $ipv6
+    if [ $? -ne 0 ];then
+        echo "Error: ifconfig $lan_if $ipv6 failed." >> $test_log
+    fi
+    fi
+}
+
+#½âÎöÄÚÍøµØÖ·¡¢Íø¹ØµØַͨ¹ýproc»úÖƶ¯Ì¬´«µÝ¸øÄںˣ¬ÒÔ±ãÄÚºËʵÏÖ·ÀÖ¹ÄÚÍøµØַй¶¹¦ÄÜ
+lanip_proc()
+{
+    #ipµØÖ·»»Ëã³É4×Ö½ÚÕûÐÍÊÇÍøÂç×Ö½ÚÐò£¬Òªµßµ¹ÏÂ
+    #uclinux²»Ö§³Ö×óÒÆ×Ö·û
+	ip_value=`echo "$ip" | awk -F '.' '{printf $1 + 256* $2 + 256*256* $3 + 256*256*256* $4}'`
+	nm_value=`echo "$nm" | awk -F '.' '{printf $1 + 256* $2 + 256*256* $3 + 256*256*256* $4}'`
+
+    echo $ip_value > /sys/module/lanip_filter_ipv4/parameters/lan_ipaddr
+    echo $nm_value > /sys/module/lanip_filter_ipv4/parameters/lan_netmask
+}
+
+main()
+{
+    lan_enable=`nv get LanEnable`
+    if [ "x$lan_enable" == "x0" ]; then
+        exit 0
+    fi
+
+    echo "Info: lan.sh start" >> $test_log
+
+    if [ "x$lan_enable" == "x1" ]; then
+        br_set
+    fi
+	
+	if [ "x$lan_if" != "x" ]; then
+        lan_set
+    fi
+    
+    #vlanÅäÖã¬ÔÝʱ·ÅÓÚ´Ë´¦£¬1 ¿ª»úµÄʱºò²»ÐèÒª½«sw¼ÓÈëµ½ÍøÇÅÏ 
+    #2 ´Ë´¦±ØÐ뽫sw upÆðÀ´£¬Èç¹û²»upµÄ»°½«²»»áÓÐrj45ÈȲå°Îʼþ
+    sw_name=`nv get swvlan`
+    ifconfig $sw_name up
+    natenable=`nv get natenable`
+    dosenable=`nv get dosenable`
+    if [[ "x$natenable" != "x0" || "x$dosenable" != "x0" ]]; then
+        lanip_proc
+    fi
+    if [ "x$dosenable" != "x0" ]; then
+        echo 1 > /sys/module/fast_common/parameters/lan_dos_enable
+    fi
+
+
+
+
+    echo "" > $path_conf/udhcpd.leases
+
+    . $path_sh/user-config-udhcpd.sh
+        
+    dhcp=`nv get dhcpEnabled`
+    if [ "$dhcp" == "1" ]; then
+        echo "Info: config-udhcpd.sh lan -r 1 start" >> $test_log
+        . $path_sh/config-udhcpd.sh "lan" -r 1
+    fi
+
+    dnsmasq -i $lan_if -r $path_conf/resolv.conf &
+    . $path_sh/upnp.sh
+    
+	#»ñÈ¡br0µÄipv6µØÖ·
+    ipv6lanipaddrcmd="ifconfig $br_name | grep Scope:Link | sed 's/^.*addr: //g' | sed 's/\/.*$//g'"
+    ipv6lanipaddr=`eval $ipv6lanipaddrcmd`
+    nv set ipv6_lan_ipaddr=$ipv6lanipaddr
+}
+
+main