[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/app/Script/scripts/wan_ipv6.sh b/ap/app/Script/scripts/wan_ipv6.sh
new file mode 100755
index 0000000..d7045caa
--- /dev/null
+++ b/ap/app/Script/scripts/wan_ipv6.sh
@@ -0,0 +1,416 @@
+#!/bin/sh
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+
+echo "input param is $1 $2 $3"
+echo "Info: wan_ipv6 $1 $2 $3 start" >> $test_log
+
+#Èë²ÎÖÐÓÐc_idÔòÉèÖã¬Ã»ÓÐÔòÖÃÁ㣬ÓÃÓÚÉèÖòßÂÔ·ÓɱíºÅ
+if [ "$3" == "" ]; then
+ c_id="0"
+else
+ c_id=$3
+fi
+def_cid=`nv get default_cid`
+
+is_chinamobile_pd_diff=`nv get pd_chinamobile_enable`
+pd_chinamobile=`nv get pd_chinamobile`
+prefix_len=`nv get pd_len_chinamobile`
+
+b_dhcpv6stateEnabled=`nv get dhcpv6stateEnabled`
+b_dhcpv6statelessEnabled=`nv get dhcpv6statelessEnabled`
+
+############# »ñÈ¡Ö¸¶¨Íø¿ÚµÄÈ«¾Ö±äÁ¿ ############
+get_wan_info()
+{
+ echo "wan_name_info = $1"
+
+ #»ñÈ¡¶ÔÓ¦wan¿ÚµÄip mode
+ wan_mode=`nv get $1"_mode"`
+
+ #»ñÈ¡¶ÔÓ¦µÄÍø¿ÚÃû
+ case $1 in
+ "pswan")
+ wan_if=$pswan_name$2 ;;
+ "usbwan")
+ wan_if=$usbwan_if ;;
+ "ethwan")
+ wan_if=$ethwan_if ;;
+ "wifiwan")
+ wan_if=$wifiwan_if ;;
+ esac
+ mtu=`nv get mtu`
+ ifconfig $wan_if mtu $mtu
+
+ #ÐèÒªÓõ½Ïà¹ØÅäÖÃÎļþ
+ dhcp6s_conf=$path_conf/dhcp6s_$wan_if.conf
+ radvd_conf=$path_conf/radvd_$wan_if.conf
+ radvd_pidfile=$path_tmp/radvd_$wan_if.pid
+ #resolv_conf=$path_conf/resolv_$wan_if.conf
+ ndp_log=$path_conf/ndp_$wan_if.log
+
+ #·ÀdosÏà¹ØÅäÖÃ
+ dosenable=`nv get dosenable`
+ if [ "x$dosenable" != "x0" ]; then
+ if [ "$1" == "pswan" ]; then
+ wan6_prefix=$1$2"_prefix"
+ else
+ wan6_prefix=$1"_prefix"
+ fi
+ echo 1 > /sys/module/fast_common/parameters/lan_dos_enable
+ echo "wan6_prefix_name = $wan6_prefix"
+ fi
+
+ echo "wan_if_info = $wan_if"
+}
+
+#Çå³ýÏàÓ¦µÄslaac½ø³Ì
+slaac_kill()
+{
+ ps > ${path_tmp}/zte_ipv6_slaac.${wan_if}.$$
+ slaac_pid=`awk 'BEGIN{temp1="'"${wan_if}"'";temp2="zte_ipv6_slaac"}{if(index($0,temp1)>0 && index($0,temp2)>0){print $1}}' ${path_tmp}/zte_ipv6_slaac.${wan_if}.$$`
+ rm -f ${path_tmp}/zte_ipv6_slaac.${wan_if}.$$
+ [ -n "$slaac_pid" ] && { kill $slaac_pid; echo "Info: kill slaac $slaac_pid " >> $test_log ; }
+}
+
+linkup_get_wan_addr()
+{
+ echo "wan_name_info = $wan_if"
+
+ #disable the forwarding to send RS and not set the addr when receive ra packet
+ #echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
+ echo 0 > /proc/sys/net/ipv6/conf/$wan_if/accept_ra
+
+ # IPv6ÔÝʱ²»¿¼ÂÇstaticģʽ£¬È罫À´ÓÐÐèÇ󣬲ο¼ipv4ÅäÖÃ
+ # µ±wan_modeΪDHCP£¬»òÕßusbwan¡¢ethwanΪPPP¡¢PPPOEʱ£¬Æô¶¯dhcp6c
+ if [ "$1" == "pswan" ]; then
+
+ if [ "-$wan_mode" == "-dhcp" ]; then
+ ifconfig $wan_if arp 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if arp failed." >> $test_log
+ fi
+ fi
+ #call the slaac program to get the prefix addr
+ ifconfig $wan_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if up failed." >> $test_log
+ fi
+ prefix_info_temp=`nv get $wan_if"_ipv6_prefix_info"`
+ #Èç¹ûµ±Ç°Ã»ÓÐǰ׺£¬ÔòÖ±½ÓÆô¶¯slaac£¬Èç¹ûµ±Ç°Ç°×ºÒѾÉèÖã¬Ôò˵Ã÷ÒѾ»ñÈ¡µ½£¬Ö±½ÓÅäÖÃIPµØÖ·¼´¿É
+ if [ -n "$prefix_info_temp" -a "-$prefix_info_temp" != "-::" ]; then
+ ret_code=0
+ else
+ sleep 1
+ interface_id_temp1=`nv get $wan_if"_ipv6_interface_id"`
+ local_ipv6_addr="fe80::"$interface_id_temp1
+ local_ipv6_addr_nv="$wan_if""_local_ipv6_addr"
+ nv set $local_ipv6_addr_nv=$local_ipv6_addr
+ ip -6 addr add $local_ipv6_addr/64 dev $wan_if 2>>$test_log
+ zte_ipv6_slaac -i "$wan_if"
+ ret_code=$?
+ fi
+
+ echo "the program zte_ipv6_slaac return = $ret_code"
+ if [ $ret_code -eq 0 ]; then
+ echo "the zte_ipv6_slaac success"
+ interface_id_temp=`nv get $wan_if"_ipv6_interface_id"`
+ prefix_info_temp=`nv get $wan_if"_ipv6_prefix_info"`
+
+ echo "##############1##########"
+ echo "$interface_id_temp"
+ echo "$prefix_info_temp"
+ echo "##############2##########"
+
+ if [ "x$dosenable" != "x0" ]; then
+ ip6_prefix=`echo "$prefix_info_temp" | awk -F ':' '{printf "0x"$1",0x"$2",0x"$3",0x"$4}'`
+ echo "ip6_prefix1=$ip6_prefix"
+ echo $ip6_prefix > /sys/module/fast_common/parameters/$wan6_prefix
+ fi
+
+
+ wan_addr=$prefix_info_temp$interface_id_temp
+ wan_addr_nv=$wan_if"_ipv6_ip"
+ nv set $wan_addr_nv="$wan_addr"
+ echo "wan_addr = $wan_addr"
+
+ ip -6 addr add $wan_addr/126 dev $wan_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 addr add $wan_addr/126 dev $wan_if failed." >> $test_log
+ fi
+
+ killall -9 clatd
+ clatd -i $wan_if -p 1:1:1:123:: &
+
+ if [ "-$c_id" != "-$def_cid" ]; then
+ wan_pri=`nv get $1"_priority"`
+ rt_num=`expr $wan_pri \* 10 + $c_id`
+ default_gw_addr_temp=`nv get $wan_if"_ipv6_gw"`
+ echo "ipv6_wan_default_gw = $default_gw_addr_temp"
+ ip -6 rule add from $wan_addr table $rt_num 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 rule add from $wan_addr table $rt_num failed." >> $test_log
+ fi
+ if [ -n "$default_gw_addr_temp" -a "-$default_gw_addr_temp" != "-::" ] ; then
+ ip -6 route add default via $default_gw_addr_temp dev $wan_if table $rt_num 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 route add default via $default_gw_addr_temp dev $wan_if table $rt_num failed." >> $test_log
+ fi
+ else
+ ip -6 route add default dev $wan_if table $rt_num 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 route add default dev $wan_if table $rt_num failed." >> $test_log
+ fi
+ fi
+ ip -6 route flush cache 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 route flush cache failed." >> $test_log
+ fi
+ #sleep 1
+ fi
+ nv set $wan_if"_ipv6_state"="working"
+ else
+ echo "the zte_ipv6_slaac fail"
+ nv set $wan_if"_ipv6_state"="dead"
+ #exit 1
+ fi
+ else
+ #if [ "-$wan_mode" == "-DHCP" -o "-$wan_mode" == "-PPP" -o "-$wan_mode" == "-PPPOE" ]; then
+ #dhcp6c -dDf -z $wan_if &
+ # ²ÉÓÃPDP¼¤»î·ÖÅäµÄipv6µØÖ·
+ #else
+ #call the slaac program to get the prefix addr
+ ifconfig $wan_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if up failed." >> $test_log
+ fi
+ #sleep 1
+ #interface_id_temp1=`nv get $wan_if"_ipv6_interface_id"`
+ interface_id_temp1="0001:0002:0003:0004"
+ nv set $wan_if"_ipv6_interface_id"=$interface_id_temp1
+ local_ipv6_addr="fe80::"$interface_id_temp1
+ local_ipv6_addr_nv="$wan_if""_local_ipv6_addr"
+ nv set $local_ipv6_addr_nv=$local_ipv6_addr
+ ip -6 addr add $local_ipv6_addr/64 dev $wan_if 2>>$test_log
+
+ zte_ipv6_slaac -i "$wan_if"
+ ret_code=$?
+
+ echo "the program zte_ipv6_slaac return = $ret_code"
+ if [ $ret_code -eq 0 ]; then
+ echo "the zte_ipv6_slaac success"
+ #ifconfig $wan_if up 2>>$test_log
+ dhcp6c -dDf -z $wan_if &
+ interface_id_temp=`nv get $wan_if"_ipv6_interface_id"`
+ prefix_info_temp=`nv get $wan_if"_ipv6_prefix_info"`
+ if [ "-$prefix_info_temp" == "-" -o "-$prefix_info_temp" == "-::" ]; then
+ echo "wait dhcp6c get ipv6_prefix"
+ sleep 2
+ prefix_info_temp=`nv get $wan_if"_ipv6_prefix_info"`
+ fi
+
+ echo "##############1##########"
+ echo "$interface_id_temp"
+ echo "$prefix_info_temp"
+ echo "##############2##########"
+ if [ "-$prefix_info_temp" == "-" -o "-$prefix_info_temp" == "-::" ]; then
+ echo "get ipv6_prefix fail"
+ nv set $wan_if"_ipv6_state"="dead"
+ exit 1
+ fi
+ if [ "x$dosenable" != "x0" ]; then
+ ip6_prefix=`echo "$prefix_info_temp" | awk -F ':' '{printf "0x"$1",0x"$2",0x"$3",0x"$4}'`
+ echo "ip6_prefix2=$ip6_prefix"
+ echo $ip6_prefix > /sys/module/fast_common/parameters/$wan6_prefix
+ fi
+
+ wan_addr=$prefix_info_temp$interface_id_temp
+ wan_addr_nv=$wan_if"_ipv6_ip"
+ nv set $wan_addr_nv="$wan_addr"
+ echo "wan_addr = $wan_addr"
+
+ ip -6 addr add $wan_addr/126 dev $wan_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 addr add $wan_addr/126 dev $wan_if failed." >> $test_log
+ fi
+
+ killall -9 clatd
+ clatd -i $wan_if -p 1:1:1:123:: &
+ else
+ echo "the zte_ipv6_slaac fail"
+ nv set $wan_if"_ipv6_state"="dead"
+ exit 1
+ fi
+ #fi
+ fi
+}
+
+#############linkdown radvd set############
+linkdown_radvd_set()
+{
+ if [ "-$b_dhcpv6stateEnabled" = "-1" ];then
+ radvd_kill
+ return
+ else
+ sed -i -e s/AdvValidLifetime.*/'AdvValidLifetime 30;'/g $radvd_conf
+ sed -i -e s/AdvPreferredLifetime.*/'AdvPreferredLifetime 1;'/g $radvd_conf
+ fi
+
+ if [ "-$is_chinamobile_pd_diff" = "-1" ] ; then
+ if [ "-$pd_chinamobile" == "-" ] ; then
+ echo "no pd info get"
+ else
+ radvd_kill
+ rm -rf $radvd_pidfile
+ radvd -d 3 -C $radvd_conf -s -p $radvd_pidfile &
+ nv set pd_chinamobile=""
+ nv set pd_len_chinamobile=""
+ radvd_kill
+ fi
+ fi
+
+ radvd_kill
+ rm -rf $radvd_pidfile
+ radvd -d 3 -C $radvd_conf -s -p $radvd_pidfile &
+}
+
+#############linkdown wanaddr route set############
+linkdown_route_set()
+{
+ echo "wan_name_info = $wan_if"
+
+ wan_addr=`nv get $wan_if"_ipv6_ip"`
+ ip -6 addr del $wan_addr/126 dev $wan_if
+
+ local_ipv6_addr_nv="$wan_if""_local_ipv6_addr"
+ local_ipv6_addr=`nv get $local_ipv6_addr_nv`
+ ip -6 addr del $local_ipv6_addr/64 dev $wan_if 2>>$test_log
+ #if [ $? -ne 0 ];then
+ # echo "Error: ip -6 addr del $wan_addr/126 dev $wan_if failed." >> $test_log
+ #fi
+
+ killall clatd
+ sh $path_sh/clat_config.sh down $wan_if
+
+ if [ "-$c_id" == "-0" -o "-$c_id" == "-$def_cid" ]; then
+ echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
+ ip -6 route del default
+ #if [ $? -ne 0 ];then
+ #echo "Error: ip -6 route del default failed." >> $test_log
+ #fi
+
+ nv set ipv6_br0_addr="::"
+ ipv6_addr_conver $wan_addr "$wan_if"
+ ipv6_br0_addr_tmp=`nv get ipv6_br0_addr`
+ ip -6 addr del $ipv6_br0_addr_tmp/64 dev br0
+ #if [ $? -ne 0 ];then
+ #echo "Error: ip -6 addr del $ipv6_br0_addr_tmp/64 dev br0 failed." >> $test_log
+ #fi
+
+ #ÊÊÅäÒ³ÃæµÈÆäËûµØ·½Ê¹ÓÃÀÏNV
+ nv set ipv6_wan_ipaddr="::"
+
+ def_cid=`nv get default_cid`
+ if [ "-$c_id" == "-$def_cid" ]; then
+ nv set default_cid=""
+ nv set $wan_if"_ipv6_state"="dead"
+ fi
+ else
+ wan_pri=`nv get $1"_priority"`
+ rt_num=`expr $wan_pri \* 10 + $c_id`
+
+ default_gw_addr_temp=`nv get $wan_if"_ipv6_gw"`
+ echo "ipv6_wan_default_gw = $default_gw_addr_temp"
+
+ ip -6 rule del from $wan_addr table $rt_num
+ #if [ $? -ne 0 ];then
+ #echo "Error: ip -6 rule del from $wan_addr table $rt_num failed." >> $test_log
+ #fi
+ if [ -n "$default_gw_addr_temp" ] ; then
+ ip -6 route del default via $default_gw_addr_temp dev $wan_if table $rt_num
+ #if [ $? -ne 0 ];then
+ #echo "Error: ip -6 route del default via $default_gw_addr_temp dev $wan_if table $rt_num failed." >> $test_log
+ #fi
+ else
+ ip -6 route del default dev $wan_if table $rt_num
+ #if [ $? -ne 0 ];then
+ #echo "Error: ip -6 route del default dev $wan_if table $rt_num failed." >> $test_log
+ #fi
+ fi
+ ip -6 route flush cache 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 route flush cache failed." >> $test_log
+ fi
+
+ nv set $wan_if"_ipv6_state"="dead"
+
+ fi
+
+ echo 0 > /proc/sys/net/ipv6/conf/$wan_if/accept_ra
+
+ #reset wan'nv
+ nv set $wan_if"_ipv6_ip"="::"
+ nv set $wan_if"_ipv6_pridns_auto"="::"
+ nv set $wan_if"_ipv6_secdns_auto"="::"
+ nv set $wan_if"_ipv6_gw"="::"
+ nv set $wan_if"_ipv6_interface_id"="::"
+ nv set $wan_if"_ipv6_prefix_info"="::"
+ nv set $wan_if"_dhcpv6_start"="::"
+ nv set $wan_if"_dhcpv6_end"="::"
+ nv set $wan_if"_radvd_ipv6_dns_servers"="::"
+
+ if [ "x$dosenable" != "x0" ]; then
+ echo 0,0,0,0 > /sys/module/fast_common/parameters/$wan6_prefix
+ fi
+ if [ "$1" == "pswan" ]; then
+ ifconfig $wan_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if down failed." >> $test_log
+ fi
+ fi
+}
+
+#Çå³ýÏàÓ¦µÄDHCPv6½ø³Ì
+linkdown_dhcpv6_server_set()
+{
+ dhcp6c_kill
+ dhcp6s_kill
+}
+
+del_default_wan6()
+{
+ default_wan6_name=`nv get default_wan6_name`
+ if [ "-$1" == "-$default_wan6_name" ]; then
+ nv set default_wan6_name=""
+ nv set default_wan6_rel=""
+ fi
+}
+############ipv6 shell entry#################
+get_wan_info $2 $3
+
+case $1 in
+ "linkup")
+ linkup_get_wan_addr $2 $3
+
+ ;;
+
+ "linkdown")
+ if [ "-$2" == "-pswan" ]; then
+ tc_tbf.sh down $def_cid
+ fi
+ linkdown_radvd_set
+ linkdown_dhcpv6_server_set
+ linkdown_route_set $2
+ slaac_kill
+ ndp_kill
+ del_default_wan6 $wan_if
+ ;;
+
+esac
+
+
+if [ "-$c_id" == "-0" -o "-$c_id" == "-$def_cid" ]; then
+ (router_msg_proxy ipv6 wan_ipv6.sh >> $test_log 2>&1 || echo "Error: router_msg_proxy ipv6 wan_ipv6.sh failed." >> $test_log) &
+fi