[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/app/busybox/src/examples/udhcp/sample.bound b/ap/app/busybox/src/examples/udhcp/sample.bound
new file mode 100755
index 0000000..bd3569c
--- /dev/null
+++ b/ap/app/busybox/src/examples/udhcp/sample.bound
@@ -0,0 +1,31 @@
+#!/bin/sh
+# Sample udhcpc renew script
+
+RESOLV_CONF="/etc/udhcpc/resolv.conf"
+
+[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
+[ -n "$subnet" ] && NETMASK="netmask $subnet"
+
+/sbin/ifconfig $interface $ip $BROADCAST $NETMASK
+
+if [ -n "$router" ]
+then
+ echo "deleting routers"
+ while /sbin/route del default gw 0.0.0.0 dev $interface
+ do :
+ done
+
+ metric=0
+ for i in $router
+ do
+ /sbin/route add default gw $i dev $interface metric $((metric++))
+ done
+fi
+
+echo -n > $RESOLV_CONF
+[ -n "$domain" ] && echo domain $domain >> $RESOLV_CONF
+for i in $dns
+do
+ echo adding dns $i
+ echo nameserver $i >> $RESOLV_CONF
+done
diff --git a/ap/app/busybox/src/examples/udhcp/sample.deconfig b/ap/app/busybox/src/examples/udhcp/sample.deconfig
new file mode 100755
index 0000000..b221bcf
--- /dev/null
+++ b/ap/app/busybox/src/examples/udhcp/sample.deconfig
@@ -0,0 +1,4 @@
+#!/bin/sh
+# Sample udhcpc deconfig script
+
+/sbin/ifconfig $interface 0.0.0.0
diff --git a/ap/app/busybox/src/examples/udhcp/sample.nak b/ap/app/busybox/src/examples/udhcp/sample.nak
new file mode 100755
index 0000000..f4d08e6
--- /dev/null
+++ b/ap/app/busybox/src/examples/udhcp/sample.nak
@@ -0,0 +1,4 @@
+#!/bin/sh
+# Sample udhcpc nak script
+
+echo Received a NAK: $message
diff --git a/ap/app/busybox/src/examples/udhcp/sample.renew b/ap/app/busybox/src/examples/udhcp/sample.renew
new file mode 100755
index 0000000..ea368fc
--- /dev/null
+++ b/ap/app/busybox/src/examples/udhcp/sample.renew
@@ -0,0 +1,31 @@
+#!/bin/sh
+# Sample udhcpc bound script
+
+RESOLV_CONF="/etc/udhcpc/resolv.conf"
+
+[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
+[ -n "$subnet" ] && NETMASK="netmask $subnet"
+
+/sbin/ifconfig $interface $ip $BROADCAST $NETMASK
+
+if [ -n "$router" ]
+then
+ echo "deleting routers"
+ while /sbin/route del default gw 0.0.0.0 dev $interface
+ do :
+ done
+
+ metric=0
+ for i in $router
+ do
+ /sbin/route add default gw $i dev $interface metric $((metric++))
+ done
+fi
+
+echo -n > $RESOLV_CONF
+[ -n "$domain" ] && echo domain $domain >> $RESOLV_CONF
+for i in $dns
+do
+ echo adding dns $i
+ echo nameserver $i >> $RESOLV_CONF
+done
diff --git a/ap/app/busybox/src/examples/udhcp/sample.script b/ap/app/busybox/src/examples/udhcp/sample.script
new file mode 100755
index 0000000..9b717ac
--- /dev/null
+++ b/ap/app/busybox/src/examples/udhcp/sample.script
@@ -0,0 +1,7 @@
+#!/bin/sh
+# Currently, we only dispatch according to command. However, a more
+# elaborate system might dispatch by command and interface or do some
+# common initialization first, especially if more dhcp event notifications
+# are added.
+
+exec /usr/share/udhcpc/sample.$1
diff --git a/ap/app/busybox/src/examples/udhcp/simple.script b/ap/app/busybox/src/examples/udhcp/simple.script
new file mode 100755
index 0000000..40ee738
--- /dev/null
+++ b/ap/app/busybox/src/examples/udhcp/simple.script
@@ -0,0 +1,47 @@
+#!/bin/sh
+# udhcpc script edited by Tim Riker <Tim@Rikers.org>
+
+RESOLV_CONF="/etc/resolv.conf"
+
+[ -n "$1" ] || { echo "Error: should be called from udhcpc"; exit 1; }
+
+NETMASK=""
+[ -n "$subnet" ] && NETMASK="netmask $subnet"
+BROADCAST="broadcast +"
+[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
+
+case "$1" in
+ deconfig)
+ echo "Setting IP address 0.0.0.0 on $interface"
+ ifconfig $interface 0.0.0.0
+ ;;
+
+ renew|bound)
+ echo "Setting IP address $ip on $interface"
+ ifconfig $interface $ip $NETMASK $BROADCAST
+
+ if [ -n "$router" ] ; then
+ echo "Deleting routers"
+ while route del default gw 0.0.0.0 dev $interface ; do
+ :
+ done
+
+ metric=0
+ for i in $router ; do
+ echo "Adding router $i"
+ route add default gw $i dev $interface metric $((metric++))
+ done
+ fi
+
+ echo "Recreating $RESOLV_CONF"
+ echo -n > $RESOLV_CONF-$$
+ [ -n "$domain" ] && echo "search $domain" >> $RESOLV_CONF-$$
+ for i in $dns ; do
+ echo " Adding DNS server $i"
+ echo "nameserver $i" >> $RESOLV_CONF-$$
+ done
+ mv $RESOLV_CONF-$$ $RESOLV_CONF
+ ;;
+esac
+
+exit 0
diff --git a/ap/app/busybox/src/examples/udhcp/udhcpd.conf b/ap/app/busybox/src/examples/udhcp/udhcpd.conf
new file mode 100644
index 0000000..eca44c0
--- /dev/null
+++ b/ap/app/busybox/src/examples/udhcp/udhcpd.conf
@@ -0,0 +1,115 @@
+# Sample udhcpd configuration file (/etc/udhcpd.conf)
+# Values shown are defaults
+
+# The start and end of the IP lease block
+start 192.168.0.20
+end 192.168.0.254
+
+# The interface that udhcpd will use
+interface eth0
+
+# The maximum number of leases (includes addresses reserved
+# by OFFER's, DECLINE's, and ARP conflicts). Will be corrected
+# if it's bigger than IP lease block, but it ok to make it
+# smaller than lease block.
+#max_leases 254
+
+# The amount of time that an IP will be reserved (leased to nobody)
+# if a DHCP decline message is received (seconds)
+#decline_time 3600
+
+# The amount of time that an IP will be reserved
+# if an ARP conflict occurs (seconds)
+#conflict_time 3600
+
+# How long an offered address is reserved (seconds)
+#offer_time 60
+
+# If client asks for lease below this value, it will be rounded up
+# to this value (seconds)
+#min_lease 60
+
+# The location of the pid file
+#pidfile /var/run/udhcpd.pid
+
+# The location of the leases file
+#lease_file /var/lib/misc/udhcpd.leases
+
+# The time period at which udhcpd will write out leases file.
+# If this is 0, udhcpd will never automatically write leases file.
+# Specified in seconds.
+#auto_time 7200
+
+# Every time udhcpd writes a leases file, the below script will be called
+#notify_file # default: no script
+#notify_file dumpleases # useful for debugging
+
+# The following are bootp specific options
+# next server to use in bootstrap
+#siaddr 192.168.0.22 # default: 0.0.0.0 (none)
+# tftp server name
+#sname zorak # default: none
+# tftp file to download (e.g. kernel image)
+#boot_file /var/nfs_root # default: none
+
+# Static leases map
+#static_lease 00:60:08:11:CE:4E 192.168.0.54
+#static_lease 00:60:08:11:CE:3E 192.168.0.44
+
+# The remainder of options are DHCP options and can be specified with the
+# keyword 'opt' or 'option'. If an option can take multiple items, such
+# as the dns option, they can be listed on the same line, or multiple
+# lines.
+# Examples:
+opt dns 192.168.10.2 192.168.10.10
+option subnet 255.255.255.0
+opt router 192.168.10.2
+opt wins 192.168.10.10
+option dns 129.219.13.81 # appended to above DNS servers for a total of 3
+option domain local
+option lease 864000 # default: 10 days
+option msstaticroutes 10.0.0.0/8 10.127.0.1 # single static route
+option staticroutes 10.0.0.0/8 10.127.0.1, 10.11.12.0/24 10.11.12.1
+# Arbitrary option in hex form:
+option 0x08 01020304 # option 8: "cookie server IP addr: 1.2.3.4"
+
+# Currently supported options (for more info, see options.c):
+#opt lease NUM
+#opt subnet IP
+#opt broadcast IP
+#opt router IP_LIST
+#opt ipttl NUM
+#opt mtu NUM
+#opt hostname STRING # client's hostname
+#opt domain STRING # client's domain suffix
+#opt search STRING_LIST # search domains
+#opt nisdomain STRING
+#opt timezone NUM # (localtime - UTC_time) in seconds. signed
+#opt tftp STRING # tftp server name
+#opt bootfile STRING # tftp file to download (e.g. kernel image)
+#opt bootsize NUM # size of that file
+#opt rootpath STRING # (NFS) path to mount as root fs
+#opt wpad STRING
+#opt serverid IP # default: server's IP
+#opt message STRING # error message (udhcpd sends it on success too)
+#opt vlanid NUM # 802.1P VLAN ID
+#opt vlanpriority NUM # 802.1Q VLAN priority
+# Options specifying server(s)
+#opt dns IP_LIST
+#opt wins IP_LIST
+#opt nissrv IP_LIST
+#opt ntpsrv IP_LIST
+#opt lprsrv IP_LIST
+#opt swapsrv IP
+# Options specifying routes
+#opt routes IP_PAIR_LIST
+#opt staticroutes STATIC_ROUTES # RFC 3442 classless static route option
+#opt msstaticroutes STATIC_ROUTES # same, using MS option number
+# Obsolete options, no longer supported
+#opt logsrv IP_LIST # 704/UDP log server (not syslog!)
+#opt namesrv IP_LIST # IEN 116 name server, obsolete (August 1979!!!)
+#opt cookiesrv IP_LIST # RFC 865 "quote of the day" server, rarely (never?) used
+#opt timesrv IP_LIST # RFC 868 time server, rarely (never?) used
+# TODO: in development
+#opt userclass STRING # RFC 3004. set of LASCII strings. "I am a printer" etc
+#opt sipserv STRING LIST # RFC 3361. flag byte, then: 0: domain names, 1: IP addrs