[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/app/busybox/src/miscutils/flashcp.c b/ap/app/busybox/src/miscutils/flashcp.c
new file mode 100644
index 0000000..81cde90
--- /dev/null
+++ b/ap/app/busybox/src/miscutils/flashcp.c
@@ -0,0 +1,156 @@
+/* vi: set sw=4 ts=4: */
+/*
+ * busybox reimplementation of flashcp
+ *
+ * (C) 2009 Stefan Seyfried <seife@sphairon.com>
+ *
+ * Licensed under GPLv2, see file LICENSE in this source tree.
+ */
+
+//usage:#define flashcp_trivial_usage
+//usage: "-v FILE MTD_DEVICE"
+//usage:#define flashcp_full_usage "\n\n"
+//usage: "Copy an image to MTD device\n"
+//usage: "\n -v Verbose"
+
+#include "libbb.h"
+#include <mtd/mtd-user.h>
+
+#define MTD_DEBUG 0
+
+#define OPT_v (1 << 0)
+
+#define BUFSIZE (8 * 1024)
+
+static void progress(int mode, uoff_t count, uoff_t total)
+{
+ uoff_t percent;
+
+ if (!option_mask32) //if (!(option_mask32 & OPT_v))
+ return;
+ percent = count * 100;
+ if (total)
+ percent = (unsigned) (percent / total);
+ printf("\r%s: %"OFF_FMT"u/%"OFF_FMT"u (%u%%) ",
+ (mode == 0) ? "Erasing block" : ((mode == 1) ? "Writing kb" : "Verifying kb"),
+ count, total, (unsigned)percent);
+ fflush_all();
+}
+
+static void progress_newline(void)
+{
+ if (!option_mask32) //if (!(option_mask32 & OPT_v))
+ return;
+ bb_putchar('\n');
+}
+
+int flashcp_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
+int flashcp_main(int argc UNUSED_PARAM, char **argv)
+{
+ int fd_f, fd_d; /* input file and mtd device file descriptors */
+ int i;
+ uoff_t erase_count;
+ struct mtd_info_user mtd;
+ struct erase_info_user e;
+ struct stat statb;
+// const char *filename, *devicename;
+ RESERVE_CONFIG_UBUFFER(buf, BUFSIZE);
+ RESERVE_CONFIG_UBUFFER(buf2, BUFSIZE);
+
+ opt_complementary = "=2"; /* exactly 2 non-option args: file, dev */
+ /*opts =*/ getopt32(argv, "v");
+ argv += optind;
+// filename = *argv++;
+// devicename = *argv;
+#define filename argv[0]
+#define devicename argv[1]
+
+ /* open input file and mtd device and do sanity checks */
+ fd_f = xopen(filename, O_RDONLY);
+ fstat(fd_f, &statb);
+ fd_d = xopen(devicename, O_SYNC | O_RDWR);
+#if !MTD_DEBUG
+ if (ioctl(fd_d, MEMGETINFO, &mtd) < 0) {
+ bb_error_msg_and_die("%s is not a MTD flash device", devicename);
+ }
+ if (statb.st_size > mtd.size) {
+ bb_error_msg_and_die("%s bigger than %s", filename, devicename);
+ }
+#else
+ mtd.erasesize = 64 * 1024;
+#endif
+
+ /* always erase a complete block */
+ erase_count = (uoff_t)(statb.st_size + mtd.erasesize - 1) / mtd.erasesize;
+ /* erase 1 block at a time to be able to give verbose output */
+ e.length = mtd.erasesize;
+#if 0
+/* (1) bloat
+ * (2) will it work for multi-gigabyte devices?
+ * (3) worse wrt error detection granularity
+ */
+ /* optimization: if not verbose, erase in one go */
+ if (!opts) { // if (!(opts & OPT_v))
+ e.length = mtd.erasesize * erase_count;
+ erase_count = 1;
+ }
+#endif
+ e.start = 0;
+ for (i = 1; i <= erase_count; i++) {
+ progress(0, i, erase_count);
+ errno = 0;
+#if !MTD_DEBUG
+ if (ioctl(fd_d, MEMERASE, &e) < 0) {
+ bb_perror_msg_and_die("erase error at 0x%llx on %s",
+ (long long)e.start, devicename);
+ }
+#else
+ usleep(100*1000);
+#endif
+ e.start += mtd.erasesize;
+ }
+ progress_newline();
+
+ /* doing this outer loop gives significantly smaller code
+ * than doing two separate loops for writing and verifying */
+ for (i = 1; i <= 2; i++) {
+ uoff_t done;
+ unsigned count;
+
+ xlseek(fd_f, 0, SEEK_SET);
+ xlseek(fd_d, 0, SEEK_SET);
+ done = 0;
+ count = BUFSIZE;
+ while (1) {
+ uoff_t rem = statb.st_size - done;
+ if (rem == 0)
+ break;
+ if (rem < BUFSIZE)
+ count = rem;
+ progress(i, done / 1024, (uoff_t)statb.st_size / 1024);
+ xread(fd_f, buf, count);
+ if (i == 1) {
+ int ret;
+ errno = 0;
+ ret = full_write(fd_d, buf, count);
+ if (ret != count) {
+ bb_perror_msg_and_die("write error at 0x%"OFF_FMT"x on %s, "
+ "write returned %d",
+ done, devicename, ret);
+ }
+ } else { /* i == 2 */
+ xread(fd_d, buf2, count);
+ if (memcmp(buf, buf2, count)) {
+ bb_error_msg_and_die("verification mismatch at 0x%"OFF_FMT"x", done);
+ }
+ }
+
+ done += count;
+ }
+
+ progress_newline();
+ }
+ /* we won't come here if there was an error */
+
+ return EXIT_SUCCESS;
+}