[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit

Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/app/pppd/modules/ppp.c b/ap/app/pppd/modules/ppp.c
new file mode 100644
index 0000000..3e97904
--- /dev/null
+++ b/ap/app/pppd/modules/ppp.c
@@ -0,0 +1,2494 @@
+/*
+ * ppp.c - STREAMS multiplexing pseudo-device driver for PPP.
+ *
+ * Copyright (c) 1994 Paul Mackerras. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. The name(s) of the authors of this software must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission.
+ *
+ * 4. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by Paul Mackerras
+ *     <paulus@samba.org>".
+ *
+ * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO
+ * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
+ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * $Id: ppp.c,v 1.2 2007-06-08 04:02:37 gerg Exp $
+ */
+
+/*
+ * This file is used under Solaris 2, SVR4, SunOS 4, and Digital UNIX.
+ */
+
+#include <sys/types.h>
+#include <sys/param.h>
+#include <sys/stat.h>
+#include <sys/stream.h>
+#include <sys/stropts.h>
+#include <sys/errno.h>
+#ifdef __osf__
+#include <sys/ioctl.h>
+#include <sys/cmn_err.h>
+#define queclass(mp)	((mp)->b_band & QPCTL)
+#else
+#include <sys/ioccom.h>
+#endif
+#include <sys/time.h>
+#ifdef SVR4
+#include <sys/cmn_err.h>
+#include <sys/conf.h>
+#include <sys/dlpi.h>
+#include <sys/ddi.h>
+#ifdef SOL2
+#include <sys/ksynch.h>
+#include <sys/kstat.h>
+#include <sys/sunddi.h>
+#include <sys/ethernet.h>
+#else
+#include <sys/socket.h>
+#include <sys/sockio.h>
+#include <net/if.h>
+#include <netinet/in.h>
+#endif /* SOL2 */
+#else /* not SVR4 */
+#include <sys/user.h>
+#endif /* SVR4 */
+#include <net/ppp_defs.h>
+#include <net/pppio.h>
+#include "ppp_mod.h"
+
+/*
+ * Modifications marked with #ifdef PRIOQ are for priority queueing of
+ * interactive traffic, and are due to Marko Zec <zec@japa.tel.fer.hr>.
+ */
+#ifdef PRIOQ
+#endif	/* PRIOQ */
+
+#include <netinet/in.h>	/* leave this outside of PRIOQ for htons */
+
+#ifdef __STDC__
+#define __P(x)	x
+#else
+#define __P(x)	()
+#endif
+
+/*
+ * The IP module may use this SAP value for IP packets.
+ */
+#ifndef ETHERTYPE_IP
+#define ETHERTYPE_IP	0x800
+#endif
+
+#if !defined(ETHERTYPE_IPV6) 
+#define ETHERTYPE_IPV6	0x86dd
+#endif /* !defined(ETHERTYPE_IPV6) */
+
+#if !defined(ETHERTYPE_ALLSAP) && defined(SOL2)
+#define ETHERTYPE_ALLSAP   0
+#endif /* !defined(ETHERTYPE_ALLSAP) && defined(SOL2) */
+
+#if !defined(PPP_ALLSAP) && defined(SOL2)
+#define PPP_ALLSAP  PPP_ALLSTATIONS
+#endif /* !defined(PPP_ALLSAP) && defined(SOL2) */
+
+extern time_t time;
+
+#ifdef SOL2
+/*
+ * We use this reader-writer lock to ensure that the lower streams
+ * stay connected to the upper streams while the lower-side put and
+ * service procedures are running.  Essentially it is an existence
+ * lock for the upper stream associated with each lower stream.
+ */
+krwlock_t ppp_lower_lock;
+#define LOCK_LOWER_W	rw_enter(&ppp_lower_lock, RW_WRITER)
+#define LOCK_LOWER_R	rw_enter(&ppp_lower_lock, RW_READER)
+#define TRYLOCK_LOWER_R	rw_tryenter(&ppp_lower_lock, RW_READER)
+#define UNLOCK_LOWER	rw_exit(&ppp_lower_lock)
+
+#define MT_ENTER(x)	mutex_enter(x)
+#define MT_EXIT(x)	mutex_exit(x)
+
+/*
+ * Notes on multithreaded implementation for Solaris 2:
+ *
+ * We use an inner perimeter around each queue pair and an outer
+ * perimeter around the whole driver.  The inner perimeter is
+ * entered exclusively for all entry points (open, close, put,
+ * service).  The outer perimeter is entered exclusively for open
+ * and close and shared for put and service.  This is all done for
+ * us by the streams framework.
+ *
+ * I used to think that the perimeters were entered for the lower
+ * streams' put and service routines as well as for the upper streams'.
+ * Because of problems experienced by people, and after reading the
+ * documentation more closely, I now don't think that is true.  So we
+ * now use ppp_lower_lock to give us an existence guarantee on the
+ * upper stream controlling each lower stream.
+ *
+ * Shared entry to the outer perimeter protects the existence of all
+ * the upper streams and their upperstr_t structures, and guarantees
+ * that the following fields of any upperstr_t won't change:
+ * nextmn, next, nextppa.  It guarantees that the lowerq field of an
+ * upperstr_t won't go from non-zero to zero, that the global `ppas'
+ * won't change and that the no lower stream will get unlinked.
+ *
+ * Shared (reader) access to ppa_lower_lock guarantees that no lower
+ * stream will be unlinked and that the lowerq field of all upperstr_t
+ * structures won't change.
+ */
+
+#else /* SOL2 */
+#define LOCK_LOWER_W	0
+#define LOCK_LOWER_R	0
+#define TRYLOCK_LOWER_R	1
+#define UNLOCK_LOWER	0
+#define MT_ENTER(x)	0
+#define MT_EXIT(x)	0
+
+#endif /* SOL2 */
+
+/*
+ * Private information; one per upper stream.
+ */
+typedef struct upperstr {
+    minor_t mn;			/* minor device number */
+    struct upperstr *nextmn;	/* next minor device */
+    queue_t *q;			/* read q associated with this upper stream */
+    int flags;			/* flag bits, see below */
+    int state;			/* current DLPI state */
+    int sap;			/* service access point */
+    int req_sap;		/* which SAP the DLPI client requested */
+    struct upperstr *ppa;	/* control stream for our ppa */
+    struct upperstr *next;	/* next stream for this ppa */
+    uint ioc_id;		/* last ioctl ID for this stream */
+    enum NPmode npmode;		/* what to do with packets on this SAP */
+    unsigned char rblocked;	/* flow control has blocked upper read strm */
+	/* N.B. rblocked is only changed by control stream's put/srv procs */
+    /*
+     * There is exactly one control stream for each PPA.
+     * The following fields are only used for control streams.
+     */
+    int ppa_id;
+    queue_t *lowerq;		/* write queue attached below this PPA */
+    struct upperstr *nextppa;	/* next control stream */
+    int mru;
+    int mtu;
+    struct pppstat stats;	/* statistics */
+    time_t last_sent;		/* time last NP packet sent */
+    time_t last_recv;		/* time last NP packet rcvd */
+#ifdef SOL2
+    kmutex_t stats_lock;	/* lock for stats updates */
+    kstat_t *kstats;		/* stats for netstat */
+#endif /* SOL2 */
+#ifdef LACHTCP
+    int ifflags;
+    char ifname[IFNAMSIZ];
+    struct ifstats ifstats;
+#endif /* LACHTCP */
+} upperstr_t;
+
+/* Values for flags */
+#define US_PRIV		1	/* stream was opened by superuser */
+#define US_CONTROL	2	/* stream is a control stream */
+#define US_BLOCKED	4	/* flow ctrl has blocked lower write stream */
+#define US_LASTMOD	8	/* no PPP modules below us */
+#define US_DBGLOG	0x10	/* log various occurrences */
+#define US_RBLOCKED	0x20	/* flow ctrl has blocked upper read stream */
+
+#if defined(SOL2)
+#if DL_CURRENT_VERSION >= 2
+#define US_PROMISC	0x40	/* stream is promiscuous */
+#endif /* DL_CURRENT_VERSION >= 2 */
+#define US_RAWDATA	0x80	/* raw M_DATA, no DLPI header */
+#endif /* defined(SOL2) */
+
+#ifdef PRIOQ
+static u_char max_band=0;
+static u_char def_band=0;
+
+#define IPPORT_DEFAULT		65535
+
+/*
+ * Port priority table
+ * Highest priority ports are listed first, lowest are listed last.
+ * ICMP & packets using unlisted ports will be treated as "default".
+ * If IPPORT_DEFAULT is not listed here, "default" packets will be 
+ * assigned lowest priority.
+ * Each line should be terminated with "0".
+ * Line containing only "0" marks the end of the list.
+ */
+
+static u_short prioq_table[]= {
+    113, 53, 0,
+    22, 23, 513, 517, 518, 0,
+    514, 21, 79, 111, 0,
+    25, 109, 110, 0,
+    IPPORT_DEFAULT, 0,
+    20, 70, 80, 8001, 8008, 8080, 0, /* 8001,8008,8080 - common proxy ports */
+0 };
+
+#endif	/* PRIOQ */
+
+
+static upperstr_t *minor_devs = NULL;
+static upperstr_t *ppas = NULL;
+
+#ifdef SVR4
+static int pppopen __P((queue_t *, dev_t *, int, int, cred_t *));
+static int pppclose __P((queue_t *, int, cred_t *));
+#else
+static int pppopen __P((queue_t *, int, int, int));
+static int pppclose __P((queue_t *, int));
+#endif /* SVR4 */
+static int pppurput __P((queue_t *, mblk_t *));
+static int pppuwput __P((queue_t *, mblk_t *));
+static int pppursrv __P((queue_t *));
+static int pppuwsrv __P((queue_t *));
+static int ppplrput __P((queue_t *, mblk_t *));
+static int ppplwput __P((queue_t *, mblk_t *));
+static int ppplrsrv __P((queue_t *));
+static int ppplwsrv __P((queue_t *));
+#ifndef NO_DLPI
+static void dlpi_request __P((queue_t *, mblk_t *, upperstr_t *));
+static void dlpi_error __P((queue_t *, upperstr_t *, int, int, int));
+static void dlpi_ok __P((queue_t *, int));
+#endif
+static int send_data __P((mblk_t *, upperstr_t *));
+static void new_ppa __P((queue_t *, mblk_t *));
+static void attach_ppa __P((queue_t *, mblk_t *));
+static void detach_ppa __P((queue_t *, mblk_t *));
+static void detach_lower __P((queue_t *, mblk_t *));
+static void debug_dump __P((queue_t *, mblk_t *));
+static upperstr_t *find_dest __P((upperstr_t *, int));
+#if defined(SOL2)
+static upperstr_t *find_promisc __P((upperstr_t *, int));
+static mblk_t *prepend_ether __P((upperstr_t *, mblk_t *, int));
+static mblk_t *prepend_udind __P((upperstr_t *, mblk_t *, int));
+static void promisc_sendup __P((upperstr_t *, mblk_t *, int, int));
+#endif /* defined(SOL2) */
+static int putctl2 __P((queue_t *, int, int, int));
+static int putctl4 __P((queue_t *, int, int, int));
+static int pass_packet __P((upperstr_t *ppa, mblk_t *mp, int outbound));
+#ifdef FILTER_PACKETS
+static int ip_hard_filter __P((upperstr_t *ppa, mblk_t *mp, int outbound));
+#endif /* FILTER_PACKETS */
+
+#define PPP_ID 0xb1a6
+static struct module_info ppp_info = {
+#ifdef PRIOQ
+    PPP_ID, "ppp", 0, 512, 512, 384
+#else
+    PPP_ID, "ppp", 0, 512, 512, 128
+#endif	/* PRIOQ */
+};
+
+static struct qinit pppurint = {
+    pppurput, pppursrv, pppopen, pppclose, NULL, &ppp_info, NULL
+};
+
+static struct qinit pppuwint = {
+    pppuwput, pppuwsrv, NULL, NULL, NULL, &ppp_info, NULL
+};
+
+static struct qinit ppplrint = {
+    ppplrput, ppplrsrv, NULL, NULL, NULL, &ppp_info, NULL
+};
+
+static struct qinit ppplwint = {
+    ppplwput, ppplwsrv, NULL, NULL, NULL, &ppp_info, NULL
+};
+
+#ifdef LACHTCP
+extern struct ifstats *ifstats;
+int pppdevflag = 0;
+#endif
+
+struct streamtab pppinfo = {
+    &pppurint, &pppuwint,
+    &ppplrint, &ppplwint
+};
+
+int ppp_count;
+
+/*
+ * How we maintain statistics.
+ */
+#ifdef SOL2
+#define INCR_IPACKETS(ppa)				\
+	if (ppa->kstats != 0) {				\
+	    KSTAT_NAMED_PTR(ppa->kstats)[0].value.ul++;	\
+	}
+#define INCR_IERRORS(ppa)				\
+	if (ppa->kstats != 0) {				\
+	    KSTAT_NAMED_PTR(ppa->kstats)[1].value.ul++;	\
+	}
+#define INCR_OPACKETS(ppa)				\
+	if (ppa->kstats != 0) {				\
+	    KSTAT_NAMED_PTR(ppa->kstats)[2].value.ul++;	\
+	}
+#define INCR_OERRORS(ppa)				\
+	if (ppa->kstats != 0) {				\
+	    KSTAT_NAMED_PTR(ppa->kstats)[3].value.ul++;	\
+	}
+#endif
+
+#ifdef LACHTCP
+#define INCR_IPACKETS(ppa)	ppa->ifstats.ifs_ipackets++;
+#define INCR_IERRORS(ppa)	ppa->ifstats.ifs_ierrors++;
+#define INCR_OPACKETS(ppa)	ppa->ifstats.ifs_opackets++;
+#define INCR_OERRORS(ppa)	ppa->ifstats.ifs_oerrors++;
+#endif
+
+/*
+ * STREAMS driver entry points.
+ */
+static int
+#ifdef SVR4
+pppopen(q, devp, oflag, sflag, credp)
+    queue_t *q;
+    dev_t *devp;
+    int oflag, sflag;
+    cred_t *credp;
+#else
+pppopen(q, dev, oflag, sflag)
+    queue_t *q;
+    int dev;			/* really dev_t */
+    int oflag, sflag;
+#endif
+{
+    upperstr_t *up;
+    upperstr_t **prevp;
+    minor_t mn;
+#ifdef PRIOQ
+    u_short *ptr;
+    u_char new_band;
+#endif	/* PRIOQ */
+
+    if (q->q_ptr)
+	DRV_OPEN_OK(dev);	/* device is already open */
+
+#ifdef PRIOQ
+    /* Calculate max_bband & def_band from definitions in prioq.h
+       This colud be done at some more approtiate time (less often)
+       but this way it works well so I'll just leave it here */
+
+    max_band = 1;
+    def_band = 0;
+    ptr = prioq_table;
+    while (*ptr) {
+        new_band = 1;
+        while (*ptr)
+	    if (*ptr++ == IPPORT_DEFAULT) {
+		new_band = 0;
+		def_band = max_band;
+	    }
+        max_band += new_band;
+        ptr++;
+    }
+    if (def_band)
+        def_band = max_band - def_band;
+    --max_band;
+#endif	/* PRIOQ */
+
+    if (sflag == CLONEOPEN) {
+	mn = 0;
+	for (prevp = &minor_devs; (up = *prevp) != 0; prevp = &up->nextmn) {
+	    if (up->mn != mn)
+		break;
+	    ++mn;
+	}
+    } else {
+#ifdef SVR4
+	mn = getminor(*devp);
+#else
+	mn = minor(dev);
+#endif
+	for (prevp = &minor_devs; (up = *prevp) != 0; prevp = &up->nextmn) {
+	    if (up->mn >= mn)
+		break;
+	}
+	if (up->mn == mn) {
+	    /* this can't happen */
+	    q->q_ptr = WR(q)->q_ptr = (caddr_t) up;
+	    DRV_OPEN_OK(dev);
+	}
+    }
+
+    /*
+     * Construct a new minor node.
+     */
+    up = (upperstr_t *) ALLOC_SLEEP(sizeof(upperstr_t));
+    bzero((caddr_t) up, sizeof(upperstr_t));
+    if (up == 0) {
+	DPRINT("pppopen: out of kernel memory\n");
+	OPEN_ERROR(ENXIO);
+    }
+    up->nextmn = *prevp;
+    *prevp = up;
+    up->mn = mn;
+#ifdef SVR4
+    *devp = makedevice(getmajor(*devp), mn);
+#endif
+    up->q = q;
+    if (NOTSUSER() == 0)
+	up->flags |= US_PRIV;
+#ifndef NO_DLPI
+    up->state = DL_UNATTACHED;
+#endif
+#ifdef LACHTCP
+    up->ifflags = IFF_UP | IFF_POINTOPOINT;
+#endif
+    up->sap = -1;
+    up->last_sent = up->last_recv = time;
+    up->npmode = NPMODE_DROP;
+    q->q_ptr = (caddr_t) up;
+    WR(q)->q_ptr = (caddr_t) up;
+    noenable(WR(q));
+#ifdef SOL2
+    mutex_init(&up->stats_lock, NULL, MUTEX_DRIVER, NULL);
+#endif
+    ++ppp_count;
+
+    qprocson(q);
+    DRV_OPEN_OK(makedev(major(dev), mn));
+}
+
+static int
+#ifdef SVR4
+pppclose(q, flag, credp)
+    queue_t *q;
+    int flag;
+    cred_t *credp;
+#else
+pppclose(q, flag)
+    queue_t *q;
+    int flag;
+#endif
+{
+    upperstr_t *up, **upp;
+    upperstr_t *as, *asnext;
+    upperstr_t **prevp;
+
+    qprocsoff(q);
+
+    up = (upperstr_t *) q->q_ptr;
+    if (up == 0) {
+	DPRINT("pppclose: q_ptr = 0\n");
+	return 0;
+    }
+    if (up->flags & US_DBGLOG)
+	DPRINT2("ppp/%d: close, flags=%x\n", up->mn, up->flags);
+    if (up->flags & US_CONTROL) {
+#ifdef LACHTCP
+	struct ifstats *ifp, *pifp;
+#endif
+	if (up->lowerq != 0) {
+	    /* Gack! the lower stream should have be unlinked earlier! */
+	    DPRINT1("ppp%d: lower stream still connected on close?\n",
+		    up->mn);
+	    LOCK_LOWER_W;
+	    up->lowerq->q_ptr = 0;
+	    RD(up->lowerq)->q_ptr = 0;
+	    up->lowerq = 0;
+	    UNLOCK_LOWER;
+	}
+
+	/*
+	 * This stream represents a PPA:
+	 * For all streams attached to the PPA, clear their
+	 * references to this PPA.
+	 * Then remove this PPA from the list of PPAs.
+	 */
+	for (as = up->next; as != 0; as = asnext) {
+	    asnext = as->next;
+	    as->next = 0;
+	    as->ppa = 0;
+	    if (as->flags & US_BLOCKED) {
+		as->flags &= ~US_BLOCKED;
+		flushq(WR(as->q), FLUSHDATA);
+	    }
+	}
+	for (upp = &ppas; *upp != 0; upp = &(*upp)->nextppa)
+	    if (*upp == up) {
+		*upp = up->nextppa;
+		break;
+	    }
+#ifdef LACHTCP
+	/* Remove the statistics from the active list.  */
+	for (ifp = ifstats, pifp = 0; ifp; ifp = ifp->ifs_next) {
+	    if (ifp == &up->ifstats) {
+		if (pifp)
+		    pifp->ifs_next = ifp->ifs_next;
+		else
+		    ifstats = ifp->ifs_next;
+		break;
+	    }
+	    pifp = ifp;
+	}
+#endif
+    } else {
+	/*
+	 * If this stream is attached to a PPA,
+	 * remove it from the PPA's list.
+	 */
+	if ((as = up->ppa) != 0) {
+	    for (; as->next != 0; as = as->next)
+		if (as->next == up) {
+		    as->next = up->next;
+		    break;
+		}
+	}
+    }
+
+#ifdef SOL2
+    if (up->kstats)
+	kstat_delete(up->kstats);
+    mutex_destroy(&up->stats_lock);
+#endif
+
+    q->q_ptr = NULL;
+    WR(q)->q_ptr = NULL;
+
+    for (prevp = &minor_devs; *prevp != 0; prevp = &(*prevp)->nextmn) {
+	if (*prevp == up) {
+	    *prevp = up->nextmn;
+	    break;
+	}
+    }
+    FREE(up, sizeof(upperstr_t));
+    --ppp_count;
+
+    return 0;
+}
+
+/*
+ * A message from on high.  We do one of three things:
+ *	- qreply()
+ *	- put the message on the lower write stream
+ *	- queue it for our service routine
+ */
+static int
+pppuwput(q, mp)
+    queue_t *q;
+    mblk_t *mp;
+{
+    upperstr_t *us, *ppa, *nps;
+    struct iocblk *iop;
+    struct linkblk *lb;
+#ifdef LACHTCP
+    struct ifreq *ifr;
+    int i;
+#endif
+    queue_t *lq;
+    int error, n, sap;
+    mblk_t *mq;
+    struct ppp_idle *pip;
+#ifdef PRIOQ
+    queue_t *tlq;
+#endif	/* PRIOQ */
+#ifdef NO_DLPI
+    upperstr_t *os;
+#endif
+
+    us = (upperstr_t *) q->q_ptr;
+    if (us == 0) {
+	DPRINT("pppuwput: q_ptr = 0!\n");
+	return 0;
+    }
+    if (mp == 0) {
+	DPRINT1("pppuwput/%d: mp = 0!\n", us->mn);
+	return 0;
+    }
+    if (mp->b_datap == 0) {
+	DPRINT1("pppuwput/%d: mp->b_datap = 0!\n", us->mn);
+	return 0;
+    }
+    switch (mp->b_datap->db_type) {
+#ifndef NO_DLPI
+    case M_PCPROTO:
+    case M_PROTO:
+	dlpi_request(q, mp, us);
+	break;
+#endif /* NO_DLPI */
+
+    case M_DATA:
+	if (us->flags & US_DBGLOG)
+	    DPRINT3("ppp/%d: uwput M_DATA len=%d flags=%x\n",
+		    us->mn, msgdsize(mp), us->flags);
+	if (us->ppa == 0 || msgdsize(mp) > us->ppa->mtu + PPP_HDRLEN
+#ifndef NO_DLPI
+	    || (us->flags & US_CONTROL) == 0
+#endif /* NO_DLPI */
+	    ) {
+	    DPRINT1("pppuwput: junk data len=%d\n", msgdsize(mp));
+	    freemsg(mp);
+	    break;
+	}
+#ifdef NO_DLPI
+	if ((us->flags & US_CONTROL) == 0 && !pass_packet(us, mp, 1))
+	    break;
+#endif
+	if (!send_data(mp, us))
+	    putq(q, mp);
+	break;
+
+    case M_IOCTL:
+	iop = (struct iocblk *) mp->b_rptr;
+	error = EINVAL;
+	if (us->flags & US_DBGLOG)
+	    DPRINT3("ppp/%d: ioctl %x count=%d\n",
+		    us->mn, iop->ioc_cmd, iop->ioc_count);
+	switch (iop->ioc_cmd) {
+#if defined(SOL2)
+	case DLIOCRAW:	    /* raw M_DATA mode */
+	    us->flags |= US_RAWDATA;
+	    error = 0;
+	    break;
+#endif /* defined(SOL2) */
+	case I_LINK:
+	    if ((us->flags & US_CONTROL) == 0 || us->lowerq != 0)
+		break;
+	    if (mp->b_cont == 0) {
+		DPRINT1("pppuwput/%d: ioctl I_LINK b_cont = 0!\n", us->mn);
+		break;
+	    }
+	    lb = (struct linkblk *) mp->b_cont->b_rptr;
+	    lq = lb->l_qbot;
+	    if (lq == 0) {
+		DPRINT1("pppuwput/%d: ioctl I_LINK l_qbot = 0!\n", us->mn);
+		break;
+	    }
+	    LOCK_LOWER_W;
+	    us->lowerq = lq;
+	    lq->q_ptr = (caddr_t) q;
+	    RD(lq)->q_ptr = (caddr_t) us->q;
+	    UNLOCK_LOWER;
+	    iop->ioc_count = 0;
+	    error = 0;
+	    us->flags &= ~US_LASTMOD;
+	    /* Unblock upper streams which now feed this lower stream. */
+	    qenable(q);
+	    /* Send useful information down to the modules which
+	       are now linked below us. */
+	    putctl2(lq, M_CTL, PPPCTL_UNIT, us->ppa_id);
+	    putctl4(lq, M_CTL, PPPCTL_MRU, us->mru);
+	    putctl4(lq, M_CTL, PPPCTL_MTU, us->mtu);
+#ifdef PRIOQ
+            /* Lower tty driver's queue hiwat/lowat from default 4096/128
+               to 256/128 since we don't want queueing of data on
+               output to physical device */
+
+            freezestr(lq);
+            for (tlq = lq; tlq->q_next != NULL; tlq = tlq->q_next)
+		;
+            strqset(tlq, QHIWAT, 0, 256);
+            strqset(tlq, QLOWAT, 0, 128);
+            unfreezestr(lq);
+#endif	/* PRIOQ */
+	    break;
+
+	case I_UNLINK:
+	    if (mp->b_cont == 0) {
+		DPRINT1("pppuwput/%d: ioctl I_UNLINK b_cont = 0!\n", us->mn);
+		break;
+	    }
+	    lb = (struct linkblk *) mp->b_cont->b_rptr;
+#if DEBUG
+	    if (us->lowerq != lb->l_qbot) {
+		DPRINT2("ppp unlink: lowerq=%x qbot=%x\n",
+			us->lowerq, lb->l_qbot);
+		break;
+	    }
+#endif
+	    iop->ioc_count = 0;
+	    qwriter(q, mp, detach_lower, PERIM_OUTER);
+	    error = -1;
+	    break;
+
+	case PPPIO_NEWPPA:
+	    if (us->flags & US_CONTROL)
+		break;
+	    if ((us->flags & US_PRIV) == 0) {
+		error = EPERM;
+		break;
+	    }
+	    /* Arrange to return an int */
+	    if ((mq = mp->b_cont) == 0
+		|| mq->b_datap->db_lim - mq->b_rptr < sizeof(int)) {
+		mq = allocb(sizeof(int), BPRI_HI);
+		if (mq == 0) {
+		    error = ENOSR;
+		    break;
+		}
+		if (mp->b_cont != 0)
+		    freemsg(mp->b_cont);
+		mp->b_cont = mq;
+		mq->b_cont = 0;
+	    }
+	    iop->ioc_count = sizeof(int);
+	    mq->b_wptr = mq->b_rptr + sizeof(int);
+	    qwriter(q, mp, new_ppa, PERIM_OUTER);
+	    error = -1;
+	    break;
+
+	case PPPIO_ATTACH:
+	    /* like dlpi_attach, for programs which can't write to
+	       the stream (like pppstats) */
+	    if (iop->ioc_count != sizeof(int) || us->ppa != 0)
+		break;
+	    if (mp->b_cont == 0) {
+		DPRINT1("pppuwput/%d: ioctl PPPIO_ATTACH b_cont = 0!\n", us->mn);
+		break;
+	    }
+	    n = *(int *)mp->b_cont->b_rptr;
+	    for (ppa = ppas; ppa != 0; ppa = ppa->nextppa)
+		if (ppa->ppa_id == n)
+		    break;
+	    if (ppa == 0)
+		break;
+	    us->ppa = ppa;
+	    iop->ioc_count = 0;
+	    qwriter(q, mp, attach_ppa, PERIM_OUTER);
+	    error = -1;
+	    break;
+
+#ifdef NO_DLPI
+	case PPPIO_BIND:
+	    /* Attach to a given SAP. */
+	    if (iop->ioc_count != sizeof(int) || us->ppa == 0)
+		break;
+	    if (mp->b_cont == 0) {
+		DPRINT1("pppuwput/%d: ioctl PPPIO_BIND b_cont = 0!\n", us->mn);
+		break;
+	    }
+	    n = *(int *)mp->b_cont->b_rptr;
+	    /* n must be a valid PPP network protocol number. */
+	    if (n < 0x21 || n > 0x3fff || (n & 0x101) != 1)
+		break;
+	    /* check that no other stream is bound to this sap already. */
+	    for (os = us->ppa; os != 0; os = os->next)
+		if (os->sap == n)
+		    break;
+	    if (os != 0)
+		break;
+	    us->sap = n;
+	    iop->ioc_count = 0;
+	    error = 0;
+	    break;
+#endif /* NO_DLPI */
+
+	case PPPIO_MRU:
+	    if (iop->ioc_count != sizeof(int) || (us->flags & US_CONTROL) == 0)
+		break;
+	    if (mp->b_cont == 0) {
+		DPRINT1("pppuwput/%d: ioctl PPPIO_MRU b_cont = 0!\n", us->mn);
+		break;
+	    }
+	    n = *(int *)mp->b_cont->b_rptr;
+	    if (n <= 0 || n > PPP_MAXMRU)
+		break;
+	    if (n < PPP_MRU)
+		n = PPP_MRU;
+	    us->mru = n;
+	    if (us->lowerq)
+		putctl4(us->lowerq, M_CTL, PPPCTL_MRU, n);
+	    error = 0;
+	    iop->ioc_count = 0;
+	    break;
+
+	case PPPIO_MTU:
+	    if (iop->ioc_count != sizeof(int) || (us->flags & US_CONTROL) == 0)
+		break;
+	    if (mp->b_cont == 0) {
+		DPRINT1("pppuwput/%d: ioctl PPPIO_MTU b_cont = 0!\n", us->mn);
+		break;
+	    }
+	    n = *(int *)mp->b_cont->b_rptr;
+	    if (n <= 0 || n > PPP_MAXMTU)
+		break;
+	    us->mtu = n;
+#ifdef LACHTCP
+	    /* The MTU reported in netstat, not used as IP max packet size! */
+	    us->ifstats.ifs_mtu = n;
+#endif
+	    if (us->lowerq)
+		putctl4(us->lowerq, M_CTL, PPPCTL_MTU, n);
+	    error = 0;
+	    iop->ioc_count = 0;
+	    break;
+
+	case PPPIO_LASTMOD:
+	    us->flags |= US_LASTMOD;
+	    error = 0;
+	    break;
+
+	case PPPIO_DEBUG:
+	    if (iop->ioc_count != sizeof(int))
+		break;
+	    if (mp->b_cont == 0) {
+		DPRINT1("pppuwput/%d: ioctl PPPIO_DEBUG b_cont = 0!\n", us->mn);
+		break;
+	    }
+	    n = *(int *)mp->b_cont->b_rptr;
+	    if (n == PPPDBG_DUMP + PPPDBG_DRIVER) {
+		qwriter(q, NULL, debug_dump, PERIM_OUTER);
+		iop->ioc_count = 0;
+		error = -1;
+	    } else if (n == PPPDBG_LOG + PPPDBG_DRIVER) {
+		DPRINT1("ppp/%d: debug log enabled\n", us->mn);
+		us->flags |= US_DBGLOG;
+		iop->ioc_count = 0;
+		error = 0;
+	    } else {
+		if (us->ppa == 0 || us->ppa->lowerq == 0)
+		    break;
+		putnext(us->ppa->lowerq, mp);
+		error = -1;
+	    }
+	    break;
+
+	case PPPIO_NPMODE:
+	    if (iop->ioc_count != 2 * sizeof(int))
+		break;
+	    if ((us->flags & US_CONTROL) == 0)
+		break;
+	    if (mp->b_cont == 0) {
+		DPRINT1("pppuwput/%d: ioctl PPPIO_NPMODE b_cont = 0!\n", us->mn);
+		break;
+	    }
+	    sap = ((int *)mp->b_cont->b_rptr)[0];
+	    for (nps = us->next; nps != 0; nps = nps->next) {
+		if (us->flags & US_DBGLOG)
+		    DPRINT2("us = 0x%x, us->next->sap = 0x%x\n", nps, nps->sap);
+		if (nps->sap == sap)
+		    break;
+	    }
+	    if (nps == 0) {
+		if (us->flags & US_DBGLOG)
+		    DPRINT2("ppp/%d: no stream for sap %x\n", us->mn, sap);
+		break;
+	    }
+	    /* XXX possibly should use qwriter here */
+	    nps->npmode = (enum NPmode) ((int *)mp->b_cont->b_rptr)[1];
+	    if (nps->npmode != NPMODE_QUEUE && (nps->flags & US_BLOCKED) != 0)
+		qenable(WR(nps->q));
+	    iop->ioc_count = 0;
+	    error = 0;
+	    break;
+
+	case PPPIO_GIDLE:
+	    if ((ppa = us->ppa) == 0)
+		break;
+	    mq = allocb(sizeof(struct ppp_idle), BPRI_HI);
+	    if (mq == 0) {
+		error = ENOSR;
+		break;
+	    }
+	    if (mp->b_cont != 0)
+		freemsg(mp->b_cont);
+	    mp->b_cont = mq;
+	    mq->b_cont = 0;
+	    pip = (struct ppp_idle *) mq->b_wptr;
+	    pip->xmit_idle = time - ppa->last_sent;
+	    pip->recv_idle = time - ppa->last_recv;
+	    mq->b_wptr += sizeof(struct ppp_idle);
+	    iop->ioc_count = sizeof(struct ppp_idle);
+	    error = 0;
+	    break;
+
+#ifdef LACHTCP
+	case SIOCSIFNAME:
+	    /* Sent from IP down to us.  Attach the ifstats structure.  */
+	    if (iop->ioc_count != sizeof(struct ifreq) || us->ppa == 0)
+	        break;
+	    ifr = (struct ifreq *)mp->b_cont->b_rptr;
+	    /* Find the unit number in the interface name.  */
+	    for (i = 0; i < IFNAMSIZ; i++) {
+		if (ifr->ifr_name[i] == 0 ||
+		    (ifr->ifr_name[i] >= '0' &&
+		     ifr->ifr_name[i] <= '9'))
+		    break;
+		else
+		    us->ifname[i] = ifr->ifr_name[i];
+	    }
+	    us->ifname[i] = 0;
+
+	    /* Convert the unit number to binary.  */
+	    for (n = 0; i < IFNAMSIZ; i++) {
+		if (ifr->ifr_name[i] == 0) {
+		    break;
+		}
+	        else {
+		    n = n * 10 + ifr->ifr_name[i] - '0';
+		}
+	    }
+
+	    /* Verify the ppa.  */
+	    if (us->ppa->ppa_id != n)
+		break;
+	    ppa = us->ppa;
+
+	    /* Set up the netstat block.  */
+	    strncpy (ppa->ifname, us->ifname, IFNAMSIZ);
+
+	    ppa->ifstats.ifs_name = ppa->ifname;
+	    ppa->ifstats.ifs_unit = n;
+	    ppa->ifstats.ifs_active = us->state != DL_UNBOUND;
+	    ppa->ifstats.ifs_mtu = ppa->mtu;
+
+	    /* Link in statistics used by netstat.  */
+	    ppa->ifstats.ifs_next = ifstats;
+	    ifstats = &ppa->ifstats;
+
+	    iop->ioc_count = 0;
+	    error = 0;
+	    break;
+
+	case SIOCGIFFLAGS:
+	    if (!(us->flags & US_CONTROL)) {
+		if (us->ppa)
+		    us = us->ppa;
+	        else
+		    break;
+	    }
+	    ((struct iocblk_in *)iop)->ioc_ifflags = us->ifflags;
+	    error = 0;
+	    break;
+
+	case SIOCSIFFLAGS:
+	    if (!(us->flags & US_CONTROL)) {
+		if (us->ppa)
+		    us = us->ppa;
+		else
+		    break;
+	    }
+	    us->ifflags = ((struct iocblk_in *)iop)->ioc_ifflags;
+	    error = 0;
+	    break;
+
+	case SIOCSIFADDR:
+	    if (!(us->flags & US_CONTROL)) {
+		if (us->ppa)
+		    us = us->ppa;
+		else
+		    break;
+	    }
+	    us->ifflags |= IFF_RUNNING;
+	    ((struct iocblk_in *)iop)->ioc_ifflags |= IFF_RUNNING;
+	    error = 0;
+	    break;
+
+	case SIOCSIFMTU:
+	    /*
+	     * Vanilla SVR4 systems don't handle SIOCSIFMTU, rather
+	     * they take the MTU from the DL_INFO_ACK we sent in response
+	     * to their DL_INFO_REQ.  Fortunately, they will update the
+	     * MTU if we send an unsolicited DL_INFO_ACK up.
+	     */
+	    if ((mq = allocb(sizeof(dl_info_req_t), BPRI_HI)) == 0)
+		break;		/* should do bufcall */
+	    ((union DL_primitives *)mq->b_rptr)->dl_primitive = DL_INFO_REQ;
+	    mq->b_wptr = mq->b_rptr + sizeof(dl_info_req_t);
+	    dlpi_request(q, mq, us);
+	    error = 0;
+	    break;
+
+	case SIOCGIFNETMASK:
+	case SIOCSIFNETMASK:
+	case SIOCGIFADDR:
+	case SIOCGIFDSTADDR:
+	case SIOCSIFDSTADDR:
+	case SIOCGIFMETRIC:
+	    error = 0;
+	    break;
+#endif /* LACHTCP */
+
+	default:
+	    if (us->ppa == 0 || us->ppa->lowerq == 0)
+		break;
+	    us->ioc_id = iop->ioc_id;
+	    error = -1;
+	    switch (iop->ioc_cmd) {
+	    case PPPIO_GETSTAT:
+	    case PPPIO_GETCSTAT:
+		if (us->flags & US_LASTMOD) {
+		    error = EINVAL;
+		    break;
+		}
+		putnext(us->ppa->lowerq, mp);
+		break;
+	    default:
+		if (us->flags & US_PRIV)
+		    putnext(us->ppa->lowerq, mp);
+		else {
+		    DPRINT1("ppp ioctl %x rejected\n", iop->ioc_cmd);
+		    error = EPERM;
+		}
+		break;
+	    }
+	    break;
+	}
+
+	if (error > 0) {
+	    iop->ioc_error = error;
+	    mp->b_datap->db_type = M_IOCNAK;
+	    qreply(q, mp);
+	} else if (error == 0) {
+	    mp->b_datap->db_type = M_IOCACK;
+	    qreply(q, mp);
+	}
+	break;
+
+    case M_FLUSH:
+	if (us->flags & US_DBGLOG)
+	    DPRINT2("ppp/%d: flush %x\n", us->mn, *mp->b_rptr);
+	if (*mp->b_rptr & FLUSHW)
+	    flushq(q, FLUSHDATA);
+	if (*mp->b_rptr & FLUSHR) {
+	    *mp->b_rptr &= ~FLUSHW;
+	    qreply(q, mp);
+	} else
+	    freemsg(mp);
+	break;
+
+    default:
+	freemsg(mp);
+	break;
+    }
+    return 0;
+}
+
+#ifndef NO_DLPI
+static void
+dlpi_request(q, mp, us)
+    queue_t *q;
+    mblk_t *mp;
+    upperstr_t *us;
+{
+    union DL_primitives *d = (union DL_primitives *) mp->b_rptr;
+    int size = mp->b_wptr - mp->b_rptr;
+    mblk_t *reply, *np;
+    upperstr_t *ppa, *os;
+    int sap, len;
+    dl_info_ack_t *info;
+    dl_bind_ack_t *ackp;
+#if DL_CURRENT_VERSION >= 2
+    dl_phys_addr_ack_t	*paddrack;
+    static struct ether_addr eaddr = {0};
+#endif
+
+    if (us->flags & US_DBGLOG)
+	DPRINT3("ppp/%d: dlpi prim %x len=%d\n", us->mn,
+		d->dl_primitive, size);
+    switch (d->dl_primitive) {
+    case DL_INFO_REQ:
+	if (size < sizeof(dl_info_req_t))
+	    goto badprim;
+	if ((reply = allocb(sizeof(dl_info_ack_t), BPRI_HI)) == 0)
+	    break;		/* should do bufcall */
+	reply->b_datap->db_type = M_PCPROTO;
+	info = (dl_info_ack_t *) reply->b_wptr;
+	reply->b_wptr += sizeof(dl_info_ack_t);
+	bzero((caddr_t) info, sizeof(dl_info_ack_t));
+	info->dl_primitive = DL_INFO_ACK;
+	info->dl_max_sdu = us->ppa? us->ppa->mtu: PPP_MAXMTU;
+	info->dl_min_sdu = 1;
+	info->dl_addr_length = sizeof(uint);
+	info->dl_mac_type = DL_ETHER;	/* a bigger lie */
+	info->dl_current_state = us->state;
+	info->dl_service_mode = DL_CLDLS;
+	info->dl_provider_style = DL_STYLE2;
+#if DL_CURRENT_VERSION >= 2
+	info->dl_sap_length = sizeof(uint);
+	info->dl_version = DL_CURRENT_VERSION;
+#endif
+	qreply(q, reply);
+	break;
+
+    case DL_ATTACH_REQ:
+	if (size < sizeof(dl_attach_req_t))
+	    goto badprim;
+	if (us->state != DL_UNATTACHED || us->ppa != 0) {
+	    dlpi_error(q, us, DL_ATTACH_REQ, DL_OUTSTATE, 0);
+	    break;
+	}
+	for (ppa = ppas; ppa != 0; ppa = ppa->nextppa)
+	    if (ppa->ppa_id == d->attach_req.dl_ppa)
+		break;
+	if (ppa == 0) {
+	    dlpi_error(q, us, DL_ATTACH_REQ, DL_BADPPA, 0);
+	    break;
+	}
+	us->ppa = ppa;
+	qwriter(q, mp, attach_ppa, PERIM_OUTER);
+	return;
+
+    case DL_DETACH_REQ:
+	if (size < sizeof(dl_detach_req_t))
+	    goto badprim;
+	if (us->state != DL_UNBOUND || us->ppa == 0) {
+	    dlpi_error(q, us, DL_DETACH_REQ, DL_OUTSTATE, 0);
+	    break;
+	}
+	qwriter(q, mp, detach_ppa, PERIM_OUTER);
+	return;
+
+    case DL_BIND_REQ:
+	if (size < sizeof(dl_bind_req_t))
+	    goto badprim;
+	if (us->state != DL_UNBOUND || us->ppa == 0) {
+	    dlpi_error(q, us, DL_BIND_REQ, DL_OUTSTATE, 0);
+	    break;
+	}
+#if 0
+	/* apparently this test fails (unnecessarily?) on some systems */
+	if (d->bind_req.dl_service_mode != DL_CLDLS) {
+	    dlpi_error(q, us, DL_BIND_REQ, DL_UNSUPPORTED, 0);
+	    break;
+	}
+#endif
+
+	/* saps must be valid PPP network protocol numbers,
+	   except that we accept ETHERTYPE_IP in place of PPP_IP. */
+	sap = d->bind_req.dl_sap;
+	us->req_sap = sap;
+
+#if defined(SOL2)
+	if (us->flags & US_DBGLOG)
+	    DPRINT2("DL_BIND_REQ: ip gives sap = 0x%x, us = 0x%x", sap, us);
+
+	if (sap == ETHERTYPE_IP)	    /* normal IFF_IPV4 */
+	    sap = PPP_IP;
+	else if (sap == ETHERTYPE_IPV6)	    /* when IFF_IPV6 is set */
+	    sap = PPP_IPV6;
+	else if (sap == ETHERTYPE_ALLSAP)   /* snoop gives sap of 0 */
+	    sap = PPP_ALLSAP;
+	else {
+	    DPRINT2("DL_BIND_REQ: unrecognized sap = 0x%x, us = 0x%x", sap, us);
+	    dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0);
+	    break;
+	}
+#else
+	if (sap == ETHERTYPE_IP)
+	    sap = PPP_IP;
+	if (sap < 0x21 || sap > 0x3fff || (sap & 0x101) != 1) {
+	    dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0);
+	    break;
+	}
+#endif /* defined(SOL2) */
+
+	/* check that no other stream is bound to this sap already. */
+	for (os = us->ppa; os != 0; os = os->next)
+	    if (os->sap == sap)
+		break;
+	if (os != 0) {
+	    dlpi_error(q, us, DL_BIND_REQ, DL_NOADDR, 0);
+	    break;
+	}
+
+	us->sap = sap;
+	us->state = DL_IDLE;
+
+	if ((reply = allocb(sizeof(dl_bind_ack_t) + sizeof(uint),
+			    BPRI_HI)) == 0)
+	    break;		/* should do bufcall */
+	ackp = (dl_bind_ack_t *) reply->b_wptr;
+	reply->b_wptr += sizeof(dl_bind_ack_t) + sizeof(uint);
+	reply->b_datap->db_type = M_PCPROTO;
+	bzero((caddr_t) ackp, sizeof(dl_bind_ack_t));
+	ackp->dl_primitive = DL_BIND_ACK;
+	ackp->dl_sap = sap;
+	ackp->dl_addr_length = sizeof(uint);
+	ackp->dl_addr_offset = sizeof(dl_bind_ack_t);
+	*(uint *)(ackp+1) = sap;
+	qreply(q, reply);
+	break;
+
+    case DL_UNBIND_REQ:
+	if (size < sizeof(dl_unbind_req_t))
+	    goto badprim;
+	if (us->state != DL_IDLE) {
+	    dlpi_error(q, us, DL_UNBIND_REQ, DL_OUTSTATE, 0);
+	    break;
+	}
+	us->sap = -1;
+	us->state = DL_UNBOUND;
+#ifdef LACHTCP
+	us->ppa->ifstats.ifs_active = 0;
+#endif
+	dlpi_ok(q, DL_UNBIND_REQ);
+	break;
+
+    case DL_UNITDATA_REQ:
+	if (size < sizeof(dl_unitdata_req_t))
+	    goto badprim;
+	if (us->state != DL_IDLE) {
+	    dlpi_error(q, us, DL_UNITDATA_REQ, DL_OUTSTATE, 0);
+	    break;
+	}
+	if ((ppa = us->ppa) == 0) {
+	    cmn_err(CE_CONT, "ppp: in state dl_idle but ppa == 0?\n");
+	    break;
+	}
+	len = mp->b_cont == 0? 0: msgdsize(mp->b_cont);
+	if (len > ppa->mtu) {
+	    DPRINT2("dlpi data too large (%d > %d)\n", len, ppa->mtu);
+	    break;
+	}
+
+#if defined(SOL2)
+	/*
+	 * Should there be any promiscuous stream(s), send the data
+	 * up for each promiscuous stream that we recognize.
+	 */
+	if (mp->b_cont)
+	    promisc_sendup(ppa, mp->b_cont, us->sap, 0);
+#endif /* defined(SOL2) */
+
+	mp->b_band = 0;
+#ifdef PRIOQ
+        /* Extract s_port & d_port from IP-packet, the code is a bit
+           dirty here, but so am I, too... */
+        if (mp->b_datap->db_type == M_PROTO && us->sap == PPP_IP
+	    && mp->b_cont != 0) {
+	    u_char *bb, *tlh;
+	    int iphlen, len;
+	    u_short *ptr;
+	    u_char band_unset, cur_band, syn;
+	    u_short s_port, d_port;
+
+            bb = mp->b_cont->b_rptr; /* bb points to IP-header*/
+	    len = mp->b_cont->b_wptr - mp->b_cont->b_rptr;
+            syn = 0;
+	    s_port = IPPORT_DEFAULT;
+	    d_port = IPPORT_DEFAULT;
+	    if (len >= 20) {	/* 20 = minimum length of IP header */
+		iphlen = (bb[0] & 0x0f) * 4;
+		tlh = bb + iphlen;
+		len -= iphlen;
+		switch (bb[9]) {
+		case IPPROTO_TCP:
+		    if (len >= 20) {	      /* min length of TCP header */
+			s_port = (tlh[0] << 8) + tlh[1];
+			d_port = (tlh[2] << 8) + tlh[3];
+			syn = tlh[13] & 0x02;
+		    }
+		    break;
+		case IPPROTO_UDP:
+		    if (len >= 8) {	      /* min length of UDP header */
+			s_port = (tlh[0] << 8) + tlh[1];
+			d_port = (tlh[2] << 8) + tlh[3];
+		    }
+		    break;
+		}
+	    }
+
+            /*
+	     * Now calculate b_band for this packet from the
+	     * port-priority table.
+	     */
+            ptr = prioq_table;
+            cur_band = max_band;
+            band_unset = 1;
+            while (*ptr) {
+                while (*ptr && band_unset)
+                    if (s_port == *ptr || d_port == *ptr++) {
+                        mp->b_band = cur_band;
+                        band_unset = 0;
+                        break;
+		    }
+                ptr++;
+                cur_band--;
+	    }
+            if (band_unset)
+		mp->b_band = def_band;
+            /* It may be usable to urge SYN packets a bit */
+            if (syn)
+		mp->b_band++;
+	}
+#endif	/* PRIOQ */
+	/* this assumes PPP_HDRLEN <= sizeof(dl_unitdata_req_t) */
+	if (mp->b_datap->db_ref > 1) {
+	    np = allocb(PPP_HDRLEN, BPRI_HI);
+	    if (np == 0)
+		break;		/* gak! */
+	    np->b_cont = mp->b_cont;
+	    mp->b_cont = 0;
+	    freeb(mp);
+	    mp = np;
+	} else
+	    mp->b_datap->db_type = M_DATA;
+	/* XXX should use dl_dest_addr_offset/length here,
+	   but we would have to translate ETHERTYPE_IP -> PPP_IP */
+	mp->b_wptr = mp->b_rptr + PPP_HDRLEN;
+	mp->b_rptr[0] = PPP_ALLSTATIONS;
+	mp->b_rptr[1] = PPP_UI;
+	mp->b_rptr[2] = us->sap >> 8;
+	mp->b_rptr[3] = us->sap;
+	if (pass_packet(us, mp, 1)) {
+	    if (!send_data(mp, us))
+		putq(q, mp);
+	}
+	return;
+
+#if DL_CURRENT_VERSION >= 2
+    case DL_PHYS_ADDR_REQ:
+	if (size < sizeof(dl_phys_addr_req_t))
+	    goto badprim;
+
+	/*
+	 * Don't check state because ifconfig sends this one down too
+	 */
+
+	if ((reply = allocb(sizeof(dl_phys_addr_ack_t)+ETHERADDRL, 
+			BPRI_HI)) == 0)
+	    break;		/* should do bufcall */
+	reply->b_datap->db_type = M_PCPROTO;
+	paddrack = (dl_phys_addr_ack_t *) reply->b_wptr;
+	reply->b_wptr += sizeof(dl_phys_addr_ack_t);
+	bzero((caddr_t) paddrack, sizeof(dl_phys_addr_ack_t)+ETHERADDRL);
+	paddrack->dl_primitive = DL_PHYS_ADDR_ACK;
+	paddrack->dl_addr_length = ETHERADDRL;
+	paddrack->dl_addr_offset = sizeof(dl_phys_addr_ack_t);
+	bcopy(&eaddr, reply->b_wptr, ETHERADDRL);
+	reply->b_wptr += ETHERADDRL;
+	qreply(q, reply);
+	break;
+
+#if defined(SOL2)
+    case DL_PROMISCON_REQ:
+	if (size < sizeof(dl_promiscon_req_t))
+	    goto badprim;
+	us->flags |= US_PROMISC;
+	dlpi_ok(q, DL_PROMISCON_REQ);
+	break;
+
+    case DL_PROMISCOFF_REQ:
+	if (size < sizeof(dl_promiscoff_req_t))
+	    goto badprim;
+	us->flags &= ~US_PROMISC;
+	dlpi_ok(q, DL_PROMISCOFF_REQ);
+	break;
+#else
+    case DL_PROMISCON_REQ:	    /* fall thru */
+    case DL_PROMISCOFF_REQ:	    /* fall thru */
+#endif /* defined(SOL2) */
+#endif /* DL_CURRENT_VERSION >= 2 */
+
+#if DL_CURRENT_VERSION >= 2
+    case DL_SET_PHYS_ADDR_REQ:
+    case DL_SUBS_BIND_REQ:
+    case DL_SUBS_UNBIND_REQ:
+    case DL_ENABMULTI_REQ:
+    case DL_DISABMULTI_REQ:
+    case DL_XID_REQ:
+    case DL_TEST_REQ:
+    case DL_REPLY_UPDATE_REQ:
+    case DL_REPLY_REQ:
+    case DL_DATA_ACK_REQ:
+#endif
+    case DL_CONNECT_REQ:
+    case DL_TOKEN_REQ:
+	dlpi_error(q, us, d->dl_primitive, DL_NOTSUPPORTED, 0);
+	break;
+
+    case DL_CONNECT_RES:
+    case DL_DISCONNECT_REQ:
+    case DL_RESET_REQ:
+    case DL_RESET_RES:
+	dlpi_error(q, us, d->dl_primitive, DL_OUTSTATE, 0);
+	break;
+
+    case DL_UDQOS_REQ:
+	dlpi_error(q, us, d->dl_primitive, DL_BADQOSTYPE, 0);
+	break;
+
+#if DL_CURRENT_VERSION >= 2
+    case DL_TEST_RES:
+    case DL_XID_RES:
+	break;
+#endif
+
+    default:
+	cmn_err(CE_CONT, "ppp: unknown dlpi prim 0x%x\n", d->dl_primitive);
+	/* fall through */
+    badprim:
+	dlpi_error(q, us, d->dl_primitive, DL_BADPRIM, 0);
+	break;
+    }
+    freemsg(mp);
+}
+
+static void
+dlpi_error(q, us, prim, err, uerr)
+    queue_t *q;
+    upperstr_t *us;
+    int prim, err, uerr;
+{
+    mblk_t *reply;
+    dl_error_ack_t *errp;
+
+    if (us->flags & US_DBGLOG)
+        DPRINT3("ppp/%d: dlpi error, prim=%x, err=%x\n", us->mn, prim, err);
+    reply = allocb(sizeof(dl_error_ack_t), BPRI_HI);
+    if (reply == 0)
+	return;			/* XXX should do bufcall */
+    reply->b_datap->db_type = M_PCPROTO;
+    errp = (dl_error_ack_t *) reply->b_wptr;
+    reply->b_wptr += sizeof(dl_error_ack_t);
+    errp->dl_primitive = DL_ERROR_ACK;
+    errp->dl_error_primitive = prim;
+    errp->dl_errno = err;
+    errp->dl_unix_errno = uerr;
+    qreply(q, reply);
+}
+
+static void
+dlpi_ok(q, prim)
+    queue_t *q;
+    int prim;
+{
+    mblk_t *reply;
+    dl_ok_ack_t *okp;
+
+    reply = allocb(sizeof(dl_ok_ack_t), BPRI_HI);
+    if (reply == 0)
+	return;			/* XXX should do bufcall */
+    reply->b_datap->db_type = M_PCPROTO;
+    okp = (dl_ok_ack_t *) reply->b_wptr;
+    reply->b_wptr += sizeof(dl_ok_ack_t);
+    okp->dl_primitive = DL_OK_ACK;
+    okp->dl_correct_primitive = prim;
+    qreply(q, reply);
+}
+#endif /* NO_DLPI */
+
+static int
+pass_packet(us, mp, outbound)
+    upperstr_t *us;
+    mblk_t *mp;
+    int outbound;
+{
+    int pass;
+    upperstr_t *ppa;
+
+    if ((ppa = us->ppa) == 0) {
+	freemsg(mp);
+	return 0;
+    }
+
+#ifdef FILTER_PACKETS
+    pass = ip_hard_filter(us, mp, outbound);
+#else
+    /*
+     * Here is where we might, in future, decide whether to pass
+     * or drop the packet, and whether it counts as link activity.
+     */
+    pass = 1;
+#endif /* FILTER_PACKETS */
+
+    if (pass < 0) {
+	/* pass only if link already up, and don't update time */
+	if (ppa->lowerq == 0) {
+	    freemsg(mp);
+	    return 0;
+	}
+	pass = 1;
+    } else if (pass) {
+	if (outbound)
+	    ppa->last_sent = time;
+	else
+	    ppa->last_recv = time;
+    }
+
+    return pass;
+}
+
+/*
+ * We have some data to send down to the lower stream (or up the
+ * control stream, if we don't have a lower stream attached).
+ * Returns 1 if the message was dealt with, 0 if it wasn't able
+ * to be sent on and should therefore be queued up.
+ */
+static int
+send_data(mp, us)
+    mblk_t *mp;
+    upperstr_t *us;
+{
+    upperstr_t *ppa;
+
+    if ((us->flags & US_BLOCKED) || us->npmode == NPMODE_QUEUE)
+	return 0;
+    ppa = us->ppa;
+    if (ppa == 0 || us->npmode == NPMODE_DROP || us->npmode == NPMODE_ERROR) {
+	if (us->flags & US_DBGLOG)
+	    DPRINT2("ppp/%d: dropping pkt (npmode=%d)\n", us->mn, us->npmode);
+	freemsg(mp);
+	return 1;
+    }
+    if (ppa->lowerq == 0) {
+	/* try to send it up the control stream */
+        if (bcanputnext(ppa->q, mp->b_band)) {
+	    /*
+	     * The message seems to get corrupted for some reason if
+	     * we just send the message up as it is, so we send a copy.
+	     */
+	    mblk_t *np = copymsg(mp);
+	    freemsg(mp);
+	    if (np != 0)
+		putnext(ppa->q, np);
+	    return 1;
+	}
+    } else {
+        if (bcanputnext(ppa->lowerq, mp->b_band)) {
+	    MT_ENTER(&ppa->stats_lock);
+	    ppa->stats.ppp_opackets++;
+	    ppa->stats.ppp_obytes += msgdsize(mp);
+#ifdef INCR_OPACKETS
+	    INCR_OPACKETS(ppa);
+#endif
+	    MT_EXIT(&ppa->stats_lock);
+	    /*
+	     * The lower queue is only ever detached while holding an
+	     * exclusive lock on the whole driver.  So we can be confident
+	     * that the lower queue is still there.
+	     */
+	    putnext(ppa->lowerq, mp);
+	    return 1;
+	}
+    }
+    us->flags |= US_BLOCKED;
+    return 0;
+}
+
+/*
+ * Allocate a new PPA id and link this stream into the list of PPAs.
+ * This procedure is called with an exclusive lock on all queues in
+ * this driver.
+ */
+static void
+new_ppa(q, mp)
+    queue_t *q;
+    mblk_t *mp;
+{
+    upperstr_t *us, *up, **usp;
+    int ppa_id;
+
+    us = (upperstr_t *) q->q_ptr;
+    if (us == 0) {
+	DPRINT("new_ppa: q_ptr = 0!\n");
+	return;
+    }
+
+    usp = &ppas;
+    ppa_id = 0;
+    while ((up = *usp) != 0 && ppa_id == up->ppa_id) {
+	++ppa_id;
+	usp = &up->nextppa;
+    }
+    us->ppa_id = ppa_id;
+    us->ppa = us;
+    us->next = 0;
+    us->nextppa = *usp;
+    *usp = us;
+    us->flags |= US_CONTROL;
+    us->npmode = NPMODE_PASS;
+
+    us->mtu = PPP_MTU;
+    us->mru = PPP_MRU;
+
+#ifdef SOL2
+    /*
+     * Create a kstats record for our statistics, so netstat -i works.
+     */
+    if (us->kstats == 0) {
+	char unit[32];
+
+	sprintf(unit, "ppp%d", us->ppa->ppa_id);
+	us->kstats = kstat_create("ppp", us->ppa->ppa_id, unit,
+				  "net", KSTAT_TYPE_NAMED, 4, 0);
+	if (us->kstats != 0) {
+	    kstat_named_t *kn = KSTAT_NAMED_PTR(us->kstats);
+
+	    strcpy(kn[0].name, "ipackets");
+	    kn[0].data_type = KSTAT_DATA_ULONG;
+	    strcpy(kn[1].name, "ierrors");
+	    kn[1].data_type = KSTAT_DATA_ULONG;
+	    strcpy(kn[2].name, "opackets");
+	    kn[2].data_type = KSTAT_DATA_ULONG;
+	    strcpy(kn[3].name, "oerrors");
+	    kn[3].data_type = KSTAT_DATA_ULONG;
+	    kstat_install(us->kstats);
+	}
+    }
+#endif /* SOL2 */
+
+    *(int *)mp->b_cont->b_rptr = ppa_id;
+    mp->b_datap->db_type = M_IOCACK;
+    qreply(q, mp);
+}
+
+static void
+attach_ppa(q, mp)
+    queue_t *q;
+    mblk_t *mp;
+{
+    upperstr_t *us, *t;
+
+    us = (upperstr_t *) q->q_ptr;
+    if (us == 0) {
+	DPRINT("attach_ppa: q_ptr = 0!\n");
+	return;
+    }
+
+#ifndef NO_DLPI
+    us->state = DL_UNBOUND;
+#endif
+    for (t = us->ppa; t->next != 0; t = t->next)
+	;
+    t->next = us;
+    us->next = 0;
+    if (mp->b_datap->db_type == M_IOCTL) {
+	mp->b_datap->db_type = M_IOCACK;
+	qreply(q, mp);
+    } else {
+#ifndef NO_DLPI
+	dlpi_ok(q, DL_ATTACH_REQ);
+#endif
+    }
+}
+
+static void
+detach_ppa(q, mp)
+    queue_t *q;
+    mblk_t *mp;
+{
+    upperstr_t *us, *t;
+
+    us = (upperstr_t *) q->q_ptr;
+    if (us == 0) {
+	DPRINT("detach_ppa: q_ptr = 0!\n");
+	return;
+    }
+
+    for (t = us->ppa; t->next != 0; t = t->next)
+	if (t->next == us) {
+	    t->next = us->next;
+	    break;
+	}
+    us->next = 0;
+    us->ppa = 0;
+#ifndef NO_DLPI
+    us->state = DL_UNATTACHED;
+    dlpi_ok(q, DL_DETACH_REQ);
+#endif
+}
+
+/*
+ * We call this with qwriter in order to give the upper queue procedures
+ * the guarantee that the lower queue is not going to go away while
+ * they are executing.
+ */
+static void
+detach_lower(q, mp)
+    queue_t *q;
+    mblk_t *mp;
+{
+    upperstr_t *us;
+
+    us = (upperstr_t *) q->q_ptr;
+    if (us == 0) {
+	DPRINT("detach_lower: q_ptr = 0!\n");
+	return;
+    }
+
+    LOCK_LOWER_W;
+    us->lowerq->q_ptr = 0;
+    RD(us->lowerq)->q_ptr = 0;
+    us->lowerq = 0;
+    UNLOCK_LOWER;
+
+    /* Unblock streams which now feed back up the control stream. */
+    qenable(us->q);
+
+    mp->b_datap->db_type = M_IOCACK;
+    qreply(q, mp);
+}
+
+static int
+pppuwsrv(q)
+    queue_t *q;
+{
+    upperstr_t *us, *as;
+    mblk_t *mp;
+
+    us = (upperstr_t *) q->q_ptr;
+    if (us == 0) {
+	DPRINT("pppuwsrv: q_ptr = 0!\n");
+	return 0;
+    }
+
+    /*
+     * If this is a control stream, then this service procedure
+     * probably got enabled because of flow control in the lower
+     * stream being enabled (or because of the lower stream going
+     * away).  Therefore we enable the service procedure of all
+     * attached upper streams.
+     */
+    if (us->flags & US_CONTROL) {
+	for (as = us->next; as != 0; as = as->next)
+	    qenable(WR(as->q));
+    }
+
+    /* Try to send on any data queued here. */
+    us->flags &= ~US_BLOCKED;
+    while ((mp = getq(q)) != 0) {
+	if (!send_data(mp, us)) {
+	    putbq(q, mp);
+	    break;
+	}
+    }
+
+    return 0;
+}
+
+/* should never get called... */
+static int
+ppplwput(q, mp)
+    queue_t *q;
+    mblk_t *mp;
+{
+    putnext(q, mp);
+    return 0;
+}
+
+static int
+ppplwsrv(q)
+    queue_t *q;
+{
+    queue_t *uq;
+
+    /*
+     * Flow control has back-enabled this stream:
+     * enable the upper write service procedure for
+     * the upper control stream for this lower stream.
+     */
+    LOCK_LOWER_R;
+    uq = (queue_t *) q->q_ptr;
+    if (uq != 0)
+	qenable(uq);
+    UNLOCK_LOWER;
+    return 0;
+}
+
+/*
+ * This should only get called for control streams.
+ */
+static int
+pppurput(q, mp)
+    queue_t *q;
+    mblk_t *mp;
+{
+    upperstr_t *ppa, *us;
+    int proto, len;
+    struct iocblk *iop;
+
+    ppa = (upperstr_t *) q->q_ptr;
+    if (ppa == 0) {
+	DPRINT("pppurput: q_ptr = 0!\n");
+	return 0;
+    }
+
+    switch (mp->b_datap->db_type) {
+    case M_CTL:
+	MT_ENTER(&ppa->stats_lock);
+	switch (*mp->b_rptr) {
+	case PPPCTL_IERROR:
+#ifdef INCR_IERRORS
+	    INCR_IERRORS(ppa);
+#endif
+	    ppa->stats.ppp_ierrors++;
+	    break;
+	case PPPCTL_OERROR:
+#ifdef INCR_OERRORS
+	    INCR_OERRORS(ppa);
+#endif
+	    ppa->stats.ppp_oerrors++;
+	    break;
+	}
+	MT_EXIT(&ppa->stats_lock);
+	freemsg(mp);
+	break;
+
+    case M_IOCACK:
+    case M_IOCNAK:
+	/*
+	 * Attempt to match up the response with the stream
+	 * that the request came from.
+	 */
+	iop = (struct iocblk *) mp->b_rptr;
+	for (us = ppa; us != 0; us = us->next)
+	    if (us->ioc_id == iop->ioc_id)
+		break;
+	if (us == 0)
+	    freemsg(mp);
+	else
+	    putnext(us->q, mp);
+	break;
+
+    case M_HANGUP:
+	/*
+	 * The serial device has hung up.  We don't want to send
+	 * the M_HANGUP message up to pppd because that will stop
+	 * us from using the control stream any more.  Instead we
+	 * send a zero-length message as an end-of-file indication.
+	 */
+	freemsg(mp);
+	mp = allocb(1, BPRI_HI);
+	if (mp == 0) {
+	    DPRINT1("ppp/%d: couldn't allocate eof message!\n", ppa->mn);
+	    break;
+	}
+	putnext(ppa->q, mp);
+	break;
+
+    default:
+	if (mp->b_datap->db_type == M_DATA) {
+	    len = msgdsize(mp);
+	    if (mp->b_wptr - mp->b_rptr < PPP_HDRLEN) {
+		PULLUP(mp, PPP_HDRLEN);
+		if (mp == 0) {
+		    DPRINT1("ppp_urput: msgpullup failed (len=%d)\n", len);
+		    break;
+		}
+	    }
+	    MT_ENTER(&ppa->stats_lock);
+	    ppa->stats.ppp_ipackets++;
+	    ppa->stats.ppp_ibytes += len;
+#ifdef INCR_IPACKETS
+	    INCR_IPACKETS(ppa);
+#endif
+	    MT_EXIT(&ppa->stats_lock);
+
+	    proto = PPP_PROTOCOL(mp->b_rptr);
+
+#if defined(SOL2)
+	    /*
+	     * Should there be any promiscuous stream(s), send the data
+	     * up for each promiscuous stream that we recognize.
+	     */
+	    promisc_sendup(ppa, mp, proto, 1);
+#endif /* defined(SOL2) */
+
+	    if (proto < 0x8000 && (us = find_dest(ppa, proto)) != 0) {
+		/*
+		 * A data packet for some network protocol.
+		 * Queue it on the upper stream for that protocol.
+		 * XXX could we just putnext it?  (would require thought)
+		 * The rblocked flag is there to ensure that we keep
+		 * messages in order for each network protocol.
+		 */
+		if (!pass_packet(us, mp, 0))
+		    break;
+		if (!us->rblocked && !canput(us->q))
+		    us->rblocked = 1;
+		if (!us->rblocked)
+		    putq(us->q, mp);
+		else
+		    putq(q, mp);
+		break;
+	    }
+	}
+	/*
+	 * A control frame, a frame for an unknown protocol,
+	 * or some other message type.
+	 * Send it up to pppd via the control stream.
+	 */
+	if (queclass(mp) == QPCTL || canputnext(ppa->q))
+	    putnext(ppa->q, mp);
+	else
+	    putq(q, mp);
+	break;
+    }
+
+    return 0;
+}
+
+static int
+pppursrv(q)
+    queue_t *q;
+{
+    upperstr_t *us, *as;
+    mblk_t *mp, *hdr;
+#ifndef NO_DLPI
+    dl_unitdata_ind_t *ud;
+#endif
+    int proto;
+
+    us = (upperstr_t *) q->q_ptr;
+    if (us == 0) {
+	DPRINT("pppursrv: q_ptr = 0!\n");
+	return 0;
+    }
+
+    if (us->flags & US_CONTROL) {
+	/*
+	 * A control stream.
+	 * If there is no lower queue attached, run the write service
+	 * routines of other upper streams attached to this PPA.
+	 */
+	if (us->lowerq == 0) {
+	    as = us;
+	    do {
+		if (as->flags & US_BLOCKED)
+		    qenable(WR(as->q));
+		as = as->next;
+	    } while (as != 0);
+	}
+
+	/*
+	 * Messages get queued on this stream's read queue if they
+	 * can't be queued on the read queue of the attached stream
+	 * that they are destined for.  This is for flow control -
+	 * when this queue fills up, the lower read put procedure will
+	 * queue messages there and the flow control will propagate
+	 * down from there.
+	 */
+	while ((mp = getq(q)) != 0) {
+	    proto = PPP_PROTOCOL(mp->b_rptr);
+	    if (proto < 0x8000 && (as = find_dest(us, proto)) != 0) {
+		if (!canput(as->q))
+		    break;
+		putq(as->q, mp);
+	    } else {
+		if (!canputnext(q))
+		    break;
+		putnext(q, mp);
+	    }
+	}
+	if (mp) {
+	    putbq(q, mp);
+	} else {
+	    /* can now put stuff directly on network protocol streams again */
+	    for (as = us->next; as != 0; as = as->next)
+		as->rblocked = 0;
+	}
+
+	/*
+	 * If this stream has a lower stream attached,
+	 * enable the read queue's service routine.
+	 * XXX we should really only do this if the queue length
+	 * has dropped below the low-water mark.
+	 */
+	if (us->lowerq != 0)
+	    qenable(RD(us->lowerq));
+		
+    } else {
+	/*
+	 * A network protocol stream.  Put a DLPI header on each
+	 * packet and send it on.
+	 * (Actually, it seems that the IP module will happily
+	 * accept M_DATA messages without the DL_UNITDATA_IND header.)
+	 */
+	while ((mp = getq(q)) != 0) {
+	    if (!canputnext(q)) {
+		putbq(q, mp);
+		break;
+	    }
+#ifndef NO_DLPI
+	    proto = PPP_PROTOCOL(mp->b_rptr);
+	    mp->b_rptr += PPP_HDRLEN;
+	    hdr = allocb(sizeof(dl_unitdata_ind_t) + 2 * sizeof(uint),
+			 BPRI_MED);
+	    if (hdr == 0) {
+		/* XXX should put it back and use bufcall */
+		freemsg(mp);
+		continue;
+	    }
+	    hdr->b_datap->db_type = M_PROTO;
+	    ud = (dl_unitdata_ind_t *) hdr->b_wptr;
+	    hdr->b_wptr += sizeof(dl_unitdata_ind_t) + 2 * sizeof(uint);
+	    hdr->b_cont = mp;
+	    ud->dl_primitive = DL_UNITDATA_IND;
+	    ud->dl_dest_addr_length = sizeof(uint);
+	    ud->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t);
+	    ud->dl_src_addr_length = sizeof(uint);
+	    ud->dl_src_addr_offset = ud->dl_dest_addr_offset + sizeof(uint);
+#if DL_CURRENT_VERSION >= 2
+	    ud->dl_group_address = 0;
+#endif
+	    /* Send the DLPI client the data with the SAP they requested,
+	       (e.g. ETHERTYPE_IP) rather than the PPP protocol number
+	       (e.g. PPP_IP) */
+	    ((uint *)(ud + 1))[0] = us->req_sap;	/* dest SAP */
+	    ((uint *)(ud + 1))[1] = us->req_sap;	/* src SAP */
+	    putnext(q, hdr);
+#else /* NO_DLPI */
+	    putnext(q, mp);
+#endif /* NO_DLPI */
+	}
+	/*
+	 * Now that we have consumed some packets from this queue,
+	 * enable the control stream's read service routine so that we
+	 * can process any packets for us that might have got queued
+	 * there for flow control reasons.
+	 */
+	if (us->ppa)
+	    qenable(us->ppa->q);
+    }
+
+    return 0;
+}
+
+static upperstr_t *
+find_dest(ppa, proto)
+    upperstr_t *ppa;
+    int proto;
+{
+    upperstr_t *us;
+
+    for (us = ppa->next; us != 0; us = us->next)
+	if (proto == us->sap)
+	    break;
+    return us;
+}
+
+#if defined (SOL2)
+/*
+ * Test upstream promiscuous conditions. As of now, only pass IPv4 and
+ * Ipv6 packets upstream (let PPP packets be decoded elsewhere).
+ */
+static upperstr_t *
+find_promisc(us, proto)
+    upperstr_t *us;
+    int proto;
+{
+
+    if ((proto != PPP_IP) && (proto != PPP_IPV6))
+	return (upperstr_t *)0;
+
+    for ( ; us; us = us->next) {
+	if ((us->flags & US_PROMISC) && (us->state == DL_IDLE))
+	    return us;
+    }
+
+    return (upperstr_t *)0;
+}
+
+/*
+ * Prepend an empty Ethernet header to msg for snoop, et al.
+ */
+static mblk_t *
+prepend_ether(us, mp, proto)
+    upperstr_t *us;
+    mblk_t *mp;
+    int proto;
+{
+    mblk_t *eh;
+    int type;
+
+    if ((eh = allocb(sizeof(struct ether_header), BPRI_HI)) == 0) {
+	freemsg(mp);
+	return (mblk_t *)0;
+    }
+
+    if (proto == PPP_IP)
+	type = ETHERTYPE_IP;
+    else if (proto == PPP_IPV6)
+	type = ETHERTYPE_IPV6;
+    else 
+	type = proto;	    /* What else? Let decoder decide */
+
+    eh->b_wptr += sizeof(struct ether_header);
+    bzero((caddr_t)eh->b_rptr, sizeof(struct ether_header));
+    ((struct ether_header *)eh->b_rptr)->ether_type = htons((short)type);
+    eh->b_cont = mp;
+    return (eh);
+}
+
+/*
+ * Prepend DL_UNITDATA_IND mblk to msg
+ */
+static mblk_t *
+prepend_udind(us, mp, proto)
+    upperstr_t *us;
+    mblk_t *mp;
+    int proto;
+{
+    dl_unitdata_ind_t *dlu;
+    mblk_t *dh;
+    size_t size;
+
+    size = sizeof(dl_unitdata_ind_t);
+    if ((dh = allocb(size, BPRI_MED)) == 0) {
+	freemsg(mp);
+	return (mblk_t *)0;
+    }
+
+    dh->b_datap->db_type = M_PROTO;
+    dh->b_wptr = dh->b_datap->db_lim;
+    dh->b_rptr = dh->b_wptr - size;
+
+    dlu = (dl_unitdata_ind_t *)dh->b_rptr;
+    dlu->dl_primitive = DL_UNITDATA_IND;
+    dlu->dl_dest_addr_length = 0;
+    dlu->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t);
+    dlu->dl_src_addr_length = 0;
+    dlu->dl_src_addr_offset = sizeof(dl_unitdata_ind_t);
+    dlu->dl_group_address = 0;
+
+    dh->b_cont = mp;
+    return (dh);
+}
+
+/*
+ * For any recognized promiscuous streams, send data upstream
+ */
+static void
+promisc_sendup(ppa, mp, proto, skip)
+    upperstr_t *ppa;
+    mblk_t *mp;
+    int proto, skip;
+{
+    mblk_t *dup_mp, *dup_dup_mp;
+    upperstr_t *prus, *nprus;
+
+    if ((prus = find_promisc(ppa, proto)) != 0) {
+	if (dup_mp = dupmsg(mp)) {
+
+	    if (skip)
+		dup_mp->b_rptr += PPP_HDRLEN;
+
+	    for ( ; nprus = find_promisc(prus->next, proto); 
+		    prus = nprus) {
+
+		if (dup_dup_mp = dupmsg(dup_mp)) {
+		    if (canputnext(prus->q)) {
+			if (prus->flags & US_RAWDATA) {
+			    dup_dup_mp = prepend_ether(prus, dup_dup_mp, proto);
+			    putnext(prus->q, dup_dup_mp);
+			} else {
+			    dup_dup_mp = prepend_udind(prus, dup_dup_mp, proto);
+			    putnext(prus->q, dup_dup_mp);
+			}
+		    } else {
+			DPRINT("ppp_urput: data to promisc q dropped\n");
+			freemsg(dup_dup_mp);
+		    }
+		}
+	    }
+
+	    if (canputnext(prus->q)) {
+		if (prus->flags & US_RAWDATA) {
+		    dup_mp = prepend_ether(prus, dup_mp, proto);
+		    putnext(prus->q, dup_mp);
+		} else {
+		    dup_mp = prepend_udind(prus, dup_mp, proto);
+		    putnext(prus->q, dup_mp);
+		}
+	    } else {
+		DPRINT("ppp_urput: data to promisc q dropped\n");
+		freemsg(dup_mp);
+	    }
+	}
+    }
+}
+#endif /* defined(SOL2) */
+
+/*
+ * We simply put the message on to the associated upper control stream
+ * (either here or in ppplrsrv).  That way we enter the perimeters
+ * before looking through the list of attached streams to decide which
+ * stream it should go up.
+ */
+static int
+ppplrput(q, mp)
+    queue_t *q;
+    mblk_t *mp;
+{
+    queue_t *uq;
+    struct iocblk *iop;
+
+    switch (mp->b_datap->db_type) {
+    case M_IOCTL:
+	iop = (struct iocblk *) mp->b_rptr;
+	iop->ioc_error = EINVAL;
+	mp->b_datap->db_type = M_IOCNAK;
+	qreply(q, mp);
+	return 0;
+    case M_FLUSH:
+	if (*mp->b_rptr & FLUSHR)
+	    flushq(q, FLUSHDATA);
+	if (*mp->b_rptr & FLUSHW) {
+	    *mp->b_rptr &= ~FLUSHR;
+	    qreply(q, mp);
+	} else
+	    freemsg(mp);
+	return 0;
+    }
+
+    /*
+     * If we can't get the lower lock straight away, queue this one
+     * rather than blocking, to avoid the possibility of deadlock.
+     */
+    if (!TRYLOCK_LOWER_R) {
+	putq(q, mp);
+	return 0;
+    }
+
+    /*
+     * Check that we're still connected to the driver.
+     */
+    uq = (queue_t *) q->q_ptr;
+    if (uq == 0) {
+	UNLOCK_LOWER;
+	DPRINT1("ppplrput: q = %x, uq = 0??\n", q);
+	freemsg(mp);
+	return 0;
+    }
+
+    /*
+     * Try to forward the message to the put routine for the upper
+     * control stream for this lower stream.
+     * If there are already messages queued here, queue this one so
+     * they don't get out of order.
+     */
+    if (queclass(mp) == QPCTL || (qsize(q) == 0 && canput(uq)))
+	put(uq, mp);
+    else
+	putq(q, mp);
+
+    UNLOCK_LOWER;
+    return 0;
+}
+
+static int
+ppplrsrv(q)
+    queue_t *q;
+{
+    mblk_t *mp;
+    queue_t *uq;
+
+    /*
+     * Packets get queued here for flow control reasons
+     * or if the lrput routine couldn't get the lower lock
+     * without blocking.
+     */
+    LOCK_LOWER_R;
+    uq = (queue_t *) q->q_ptr;
+    if (uq == 0) {
+	UNLOCK_LOWER;
+	flushq(q, FLUSHALL);
+	DPRINT1("ppplrsrv: q = %x, uq = 0??\n", q);
+	return 0;
+    }
+    while ((mp = getq(q)) != 0) {
+	if (queclass(mp) == QPCTL || canput(uq))
+	    put(uq, mp);
+	else {
+	    putbq(q, mp);
+	    break;
+	}
+    }
+    UNLOCK_LOWER;
+    return 0;
+}
+
+static int
+putctl2(q, type, code, val)
+    queue_t *q;
+    int type, code, val;
+{
+    mblk_t *mp;
+
+    mp = allocb(2, BPRI_HI);
+    if (mp == 0)
+	return 0;
+    mp->b_datap->db_type = type;
+    mp->b_wptr[0] = code;
+    mp->b_wptr[1] = val;
+    mp->b_wptr += 2;
+    putnext(q, mp);
+    return 1;
+}
+
+static int
+putctl4(q, type, code, val)
+    queue_t *q;
+    int type, code, val;
+{
+    mblk_t *mp;
+
+    mp = allocb(4, BPRI_HI);
+    if (mp == 0)
+	return 0;
+    mp->b_datap->db_type = type;
+    mp->b_wptr[0] = code;
+    ((short *)mp->b_wptr)[1] = val;
+    mp->b_wptr += 4;
+    putnext(q, mp);
+    return 1;
+}
+
+static void
+debug_dump(q, mp)
+    queue_t *q;
+    mblk_t *mp;
+{
+    upperstr_t *us;
+    queue_t *uq, *lq;
+
+    DPRINT("ppp upper streams:\n");
+    for (us = minor_devs; us != 0; us = us->nextmn) {
+	uq = us->q;
+	DPRINT3(" %d: q=%x rlev=%d",
+		us->mn, uq, (uq? qsize(uq): 0));
+	DPRINT3(" wlev=%d flags=0x%b", (uq? qsize(WR(uq)): 0),
+		us->flags, "\020\1priv\2control\3blocked\4last");
+	DPRINT3(" state=%x sap=%x req_sap=%x", us->state, us->sap,
+		us->req_sap);
+	if (us->ppa == 0)
+	    DPRINT(" ppa=?\n");
+	else
+	    DPRINT1(" ppa=%d\n", us->ppa->ppa_id);
+	if (us->flags & US_CONTROL) {
+	    lq = us->lowerq;
+	    DPRINT3("    control for %d lq=%x rlev=%d",
+		    us->ppa_id, lq, (lq? qsize(RD(lq)): 0));
+	    DPRINT3(" wlev=%d mru=%d mtu=%d\n",
+		    (lq? qsize(lq): 0), us->mru, us->mtu);
+	}
+    }
+    mp->b_datap->db_type = M_IOCACK;
+    qreply(q, mp);
+}
+
+#ifdef FILTER_PACKETS
+#include <netinet/in_systm.h>
+#include <netinet/ip.h>
+#include <netinet/udp.h>
+#include <netinet/tcp.h>
+
+#define MAX_IPHDR    128     /* max TCP/IP header size */
+
+
+/* The following table contains a hard-coded list of protocol/port pairs.
+ * Any matching packets are either discarded unconditionally, or, 
+ * if ok_if_link_up is non-zero when a connection does not currently exist
+ * (i.e., they go through if the connection is present, but never initiate
+ * a dial-out).
+ * This idea came from a post by dm@garage.uun.org (David Mazieres)
+ */
+static struct pktfilt_tab { 
+	int proto; 
+	u_short port; 
+	u_short ok_if_link_up; 
+} pktfilt_tab[] = {
+	{ IPPROTO_UDP,	520,	1 },	/* RIP, ok to pass if link is up */
+	{ IPPROTO_UDP,	123,	1 },	/* NTP, don't keep up the link for it */
+	{ -1, 		0,	0 }	/* terminator entry has port == -1 */
+};
+
+
+static int
+ip_hard_filter(us, mp, outbound)
+    upperstr_t *us;
+    mblk_t *mp;
+    int outbound;
+{
+    struct ip *ip;
+    struct pktfilt_tab *pft;
+    mblk_t *temp_mp;
+    int proto;
+    int len, hlen;
+
+
+    /* Note, the PPP header has already been pulled up in all cases */
+    proto = PPP_PROTOCOL(mp->b_rptr);
+    if (us->flags & US_DBGLOG)
+        DPRINT3("ppp/%d: filter, proto=0x%x, out=%d\n", us->mn, proto, outbound);
+
+    switch (proto)
+    {
+    case PPP_IP:
+	if ((mp->b_wptr - mp->b_rptr) == PPP_HDRLEN && mp->b_cont != 0) {
+	    temp_mp = mp->b_cont;
+    	    len = msgdsize(temp_mp);
+	    hlen = (len < MAX_IPHDR) ? len : MAX_IPHDR;
+	    PULLUP(temp_mp, hlen);
+	    if (temp_mp == 0) {
+		DPRINT2("ppp/%d: filter, pullup next failed, len=%d\n", 
+			us->mn, hlen);
+		mp->b_cont = 0;		/* PULLUP() freed the rest */
+	        freemsg(mp);
+	        return 0;
+	    }
+	    ip = (struct ip *)mp->b_cont->b_rptr;
+	}
+	else {
+	    len = msgdsize(mp);
+	    hlen = (len < (PPP_HDRLEN+MAX_IPHDR)) ? len : (PPP_HDRLEN+MAX_IPHDR);
+	    PULLUP(mp, hlen);
+	    if (mp == 0) {
+		DPRINT2("ppp/%d: filter, pullup failed, len=%d\n", 
+			us->mn, hlen);
+	        return 0;
+	    }
+	    ip = (struct ip *)(mp->b_rptr + PPP_HDRLEN);
+	}
+
+	/* For IP traffic, certain packets (e.g., RIP) may be either
+	 *   1.  ignored - dropped completely
+	 *   2.  will not initiate a connection, but
+	 *       will be passed if a connection is currently up.
+	 */
+	for (pft=pktfilt_tab; pft->proto != -1; pft++) {
+	    if (ip->ip_p == pft->proto) {
+		switch(pft->proto) {
+		case IPPROTO_UDP:
+		    if (((struct udphdr *) &((int *)ip)[ip->ip_hl])->uh_dport
+				== htons(pft->port)) goto endfor;
+		    break;
+		case IPPROTO_TCP:
+		    if (((struct tcphdr *) &((int *)ip)[ip->ip_hl])->th_dport
+				== htons(pft->port)) goto endfor;
+		    break;
+		}	
+	    }
+	}
+	endfor:
+	if (pft->proto != -1) {
+	    if (us->flags & US_DBGLOG)
+		DPRINT3("ppp/%d: found IP pkt, proto=0x%x (%d)\n", 
+				us->mn, pft->proto, pft->port);
+	    /* Discard if not connected, or if not pass_with_link_up */
+	    /* else, if link is up let go by, but don't update time */
+	    return pft->ok_if_link_up? -1: 0;
+	}
+        break;
+    } /* end switch (proto) */
+
+    return 1;
+}
+#endif /* FILTER_PACKETS */
+