[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/app/wpa_supplicant-2.10/src/common/brcm_vendor.h b/ap/app/wpa_supplicant-2.10/src/common/brcm_vendor.h
new file mode 100755
index 0000000..f163dea
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/brcm_vendor.h
@@ -0,0 +1,156 @@
+/*
+ * Broadcom Corporation OUI and vendor specific assignments
+ * Copyright (c) 2020, Broadcom Corporation.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef BRCM_VENDOR_H
+#define BRCM_VENDOR_H
+
+/*
+ * This file is a registry of identifier assignments from the Broadcom
+ * OUI 00:10:18 for purposes other than MAC address assignment. New identifiers
+ * can be assigned through normal review process for changes to the upstream
+ * hostap.git repository.
+ */
+
+#define OUI_BRCM 0x001018
+
+/**
+ * enum brcm_nl80211_vendor_subcmds - BRCM nl80211 vendor command identifiers
+ *
+ * @BRCM_VENDOR_SCMD_UNSPEC: Reserved value 0
+ *
+ * @BRCM_VENDOR_SCMD_PRIV_STR: Provide vendor private cmds to send to FW.
+ *
+ * @BRCM_VENDOR_SCMD_BCM_STR: Provide vendor cmds to BCMDHD driver.
+ *
+ * @BRCM_VENDOR_SCMD_BCM_PSK: Used to set SAE password.
+ *
+ * @BRCM_VENDOR_SCMD_SET_PMK: Command to check driver support
+ * for DFS offloading.
+ *
+ * @BRCM_VENDOR_SCMD_GET_FEATURES: Command to get the features
+ * supported by the driver.
+ *
+ * @BRCM_VENDOR_SCMD_SET_MAC: Set random mac address for P2P interface.
+ *
+ * @BRCM_VENDOR_SCMD_SET_CONNECT_PARAMS: Set some connect parameters.
+ * Used for the case that FW handle SAE.
+ *
+ * @BRCM_VENDOR_SCMD_SET_START_AP_PARAMS: Set SoftAP paramters.
+ * Used for the case that FW handle SAE.
+ *
+ * @BRCM_VENDOR_SCMD_ACS: ACS command/event which is used to
+ * invoke the ACS function in device and pass selected channels to
+ * hostapd. Uses enum qca_wlan_vendor_attr_acs_offload attributes.
+ *
+ * @BRCM_VENDOR_SCMD_MAX: This acts as a the tail of cmds list.
+ * Make sure it located at the end of the list.
+ *
+ */
+enum brcm_nl80211_vendor_subcmds {
+ BRCM_VENDOR_SCMD_UNSPEC = 0,
+ BRCM_VENDOR_SCMD_PRIV_STR = 1,
+ BRCM_VENDOR_SCMD_BCM_STR = 2,
+ BRCM_VENDOR_SCMD_BCM_PSK = 3,
+ BRCM_VENDOR_SCMD_SET_PMK = 4,
+ BRCM_VENDOR_SCMD_GET_FEATURES = 5,
+ BRCM_VENDOR_SCMD_SET_MAC = 6,
+ BRCM_VENDOR_SCMD_SET_CONNECT_PARAMS = 7,
+ BRCM_VENDOR_SCMD_SET_START_AP_PARAMS = 8,
+ BRCM_VENDOR_SCMD_ACS = 9,
+ BRCM_VENDOR_SCMD_MAX = 10
+};
+
+/**
+ * enum brcm_nl80211_vendor_events - BRCM nl80211 asynchoronous event identifiers
+ *
+ * @BRCM_VENDOR_EVENT_UNSPEC: Reserved value 0
+ *
+ * @BRCM_VENDOR_EVENT_PRIV_STR: String command/event
+ */
+enum brcm_nl80211_vendor_events {
+ BRCM_VENDOR_EVENT_UNSPEC = 0,
+ BRCM_VENDOR_EVENT_PRIV_STR = 1,
+ GOOGLE_GSCAN_SIGNIFICANT_EVENT = 2,
+ GOOGLE_GSCAN_GEOFENCE_FOUND_EVENT = 3,
+ GOOGLE_GSCAN_BATCH_SCAN_EVENT = 4,
+ GOOGLE_SCAN_FULL_RESULTS_EVENT = 5,
+ GOOGLE_RTT_COMPLETE_EVENT = 6,
+ GOOGLE_SCAN_COMPLETE_EVENT = 7,
+ GOOGLE_GSCAN_GEOFENCE_LOST_EVENT = 8,
+ GOOGLE_SCAN_EPNO_EVENT = 9,
+ GOOGLE_DEBUG_RING_EVENT = 10,
+ GOOGLE_FW_DUMP_EVENT = 11,
+ GOOGLE_PNO_HOTSPOT_FOUND_EVENT = 12,
+ GOOGLE_RSSI_MONITOR_EVENT = 13,
+ GOOGLE_MKEEP_ALIVE_EVENT = 14,
+
+ /*
+ * BRCM specific events should be placed after
+ * the Generic events so that enums don't mismatch
+ * between the DHD and HAL
+ */
+ GOOGLE_NAN_EVENT_ENABLED = 15,
+ GOOGLE_NAN_EVENT_DISABLED = 16,
+ GOOGLE_NAN_EVENT_SUBSCRIBE_MATCH = 17,
+ GOOGLE_NAN_EVENT_REPLIED = 18,
+ GOOGLE_NAN_EVENT_PUBLISH_TERMINATED = 19,
+ GOOGLE_NAN_EVENT_SUBSCRIBE_TERMINATED = 20,
+ GOOGLE_NAN_EVENT_DE_EVENT = 21,
+ GOOGLE_NAN_EVENT_FOLLOWUP = 22,
+ GOOGLE_NAN_EVENT_TRANSMIT_FOLLOWUP_IND = 23,
+ GOOGLE_NAN_EVENT_DATA_REQUEST = 24,
+ GOOGLE_NAN_EVENT_DATA_CONFIRMATION = 25,
+ GOOGLE_NAN_EVENT_DATA_END = 26,
+ GOOGLE_NAN_EVENT_BEACON = 27,
+ GOOGLE_NAN_EVENT_SDF = 28,
+ GOOGLE_NAN_EVENT_TCA = 29,
+ GOOGLE_NAN_EVENT_SUBSCRIBE_UNMATCH = 30,
+ GOOGLE_NAN_EVENT_UNKNOWN = 31,
+ GOOGLE_ROAM_EVENT_START = 32,
+ BRCM_VENDOR_EVENT_HANGED = 33,
+ BRCM_VENDOR_EVENT_SAE_KEY = 34,
+ BRCM_VENDOR_EVENT_BEACON_RECV = 35,
+ BRCM_VENDOR_EVENT_PORT_AUTHORIZED = 36,
+ GOOGLE_FILE_DUMP_EVENT = 37,
+ BRCM_VENDOR_EVENT_CU = 38,
+ BRCM_VENDOR_EVENT_WIPS = 39,
+ NAN_ASYNC_RESPONSE_DISABLED = 40,
+ BRCM_VENDOR_EVENT_RCC_INFO = 41,
+ BRCM_VENDOR_EVENT_ACS = 42,
+ BRCM_VENDOR_EVENT_LAST
+
+};
+
+#ifdef CONFIG_BRCM_SAE
+enum wifi_sae_key_attr {
+ BRCM_SAE_KEY_ATTR_BSSID,
+ BRCM_SAE_KEY_ATTR_PMK,
+ BRCM_SAE_KEY_ATTR_PMKID
+};
+#endif /* CONFIG_BRCM_SAE */
+
+enum wl_vendor_attr_acs_offload {
+ BRCM_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0,
+ BRCM_VENDOR_ATTR_ACS_PRIMARY_FREQ,
+ BRCM_VENDOR_ATTR_ACS_SECONDARY_FREQ,
+ BRCM_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL,
+ BRCM_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL,
+
+ BRCM_VENDOR_ATTR_ACS_HW_MODE,
+ BRCM_VENDOR_ATTR_ACS_HT_ENABLED,
+ BRCM_VENDOR_ATTR_ACS_HT40_ENABLED,
+ BRCM_VENDOR_ATTR_ACS_VHT_ENABLED,
+ BRCM_VENDOR_ATTR_ACS_CHWIDTH,
+ BRCM_VENDOR_ATTR_ACS_CH_LIST,
+ BRCM_VENDOR_ATTR_ACS_FREQ_LIST,
+
+ BRCM_VENDOR_ATTR_ACS_LAST
+};
+
+
+#endif /* BRCM_VENDOR_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/cli.h b/ap/app/wpa_supplicant-2.10/src/common/cli.h
new file mode 100755
index 0000000..41ef329
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/cli.h
@@ -0,0 +1,47 @@
+/*
+ * Common hostapd/wpa_supplicant command line interface functionality
+ * Copyright (c) 2004-2016, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef CLI_H
+#define CLI_H
+
+#include "utils/list.h"
+
+extern const char *const cli_license;
+extern const char *const cli_full_license;
+
+struct cli_txt_entry {
+ struct dl_list list;
+ char *txt;
+};
+
+void cli_txt_list_free(struct cli_txt_entry *e);
+void cli_txt_list_flush(struct dl_list *list);
+
+struct cli_txt_entry *
+cli_txt_list_get(struct dl_list *txt_list, const char *txt);
+
+void cli_txt_list_del(struct dl_list *txt_list, const char *txt);
+void cli_txt_list_del_addr(struct dl_list *txt_list, const char *txt);
+void cli_txt_list_del_word(struct dl_list *txt_list, const char *txt,
+ int separator);
+
+int cli_txt_list_add(struct dl_list *txt_list, const char *txt);
+int cli_txt_list_add_addr(struct dl_list *txt_list, const char *txt);
+int cli_txt_list_add_word(struct dl_list *txt_list, const char *txt,
+ int separator);
+
+char ** cli_txt_list_array(struct dl_list *txt_list);
+
+int get_cmd_arg_num(const char *str, int pos);
+int write_cmd(char *buf, size_t buflen, const char *cmd, int argc,
+ char *argv[]);
+
+#define max_args 10
+int tokenize_cmd(char *cmd, char *argv[]);
+
+#endif /* CLI_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/ctrl_iface_common.h b/ap/app/wpa_supplicant-2.10/src/common/ctrl_iface_common.h
new file mode 100755
index 0000000..85e258e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/ctrl_iface_common.h
@@ -0,0 +1,42 @@
+/*
+ * Common hostapd/wpa_supplicant ctrl iface code.
+ * Copyright (c) 2002-2013, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2015, Qualcomm Atheros, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+#ifndef CONTROL_IFACE_COMMON_H
+#define CONTROL_IFACE_COMMON_H
+
+#include "utils/list.h"
+
+/* Events enable bits (wpa_ctrl_dst::events) */
+#define WPA_EVENT_RX_PROBE_REQUEST BIT(0)
+
+/**
+ * struct wpa_ctrl_dst - Data structure of control interface monitors
+ *
+ * This structure is used to store information about registered control
+ * interface monitors into struct wpa_supplicant.
+ */
+struct wpa_ctrl_dst {
+ struct dl_list list;
+ struct sockaddr_storage addr;
+ socklen_t addrlen;
+ int debug_level;
+ int errors;
+ u32 events; /* WPA_EVENT_* bitmap */
+};
+
+void sockaddr_print(int level, const char *msg, struct sockaddr_storage *sock,
+ socklen_t socklen);
+
+int ctrl_iface_attach(struct dl_list *ctrl_dst, struct sockaddr_storage *from,
+ socklen_t fromlen, const char *input);
+int ctrl_iface_detach(struct dl_list *ctrl_dst, struct sockaddr_storage *from,
+ socklen_t fromlen);
+int ctrl_iface_level(struct dl_list *ctrl_dst, struct sockaddr_storage *from,
+ socklen_t fromlen, const char *level);
+
+#endif /* CONTROL_IFACE_COMMON_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/defs.h b/ap/app/wpa_supplicant-2.10/src/common/defs.h
new file mode 100755
index 0000000..f43bdb5
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/defs.h
@@ -0,0 +1,478 @@
+/*
+ * WPA Supplicant - Common definitions
+ * Copyright (c) 2004-2018, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef DEFS_H
+#define DEFS_H
+
+#define WPA_CIPHER_NONE BIT(0)
+#define WPA_CIPHER_WEP40 BIT(1)
+#define WPA_CIPHER_WEP104 BIT(2)
+#define WPA_CIPHER_TKIP BIT(3)
+#define WPA_CIPHER_CCMP BIT(4)
+#define WPA_CIPHER_AES_128_CMAC BIT(5)
+#define WPA_CIPHER_GCMP BIT(6)
+#define WPA_CIPHER_SMS4 BIT(7)
+#define WPA_CIPHER_GCMP_256 BIT(8)
+#define WPA_CIPHER_CCMP_256 BIT(9)
+#define WPA_CIPHER_BIP_GMAC_128 BIT(11)
+#define WPA_CIPHER_BIP_GMAC_256 BIT(12)
+#define WPA_CIPHER_BIP_CMAC_256 BIT(13)
+#define WPA_CIPHER_GTK_NOT_USED BIT(14)
+
+#define WPA_KEY_MGMT_IEEE8021X BIT(0)
+#define WPA_KEY_MGMT_PSK BIT(1)
+#define WPA_KEY_MGMT_NONE BIT(2)
+#define WPA_KEY_MGMT_IEEE8021X_NO_WPA BIT(3)
+#define WPA_KEY_MGMT_WPA_NONE BIT(4)
+#define WPA_KEY_MGMT_FT_IEEE8021X BIT(5)
+#define WPA_KEY_MGMT_FT_PSK BIT(6)
+#define WPA_KEY_MGMT_IEEE8021X_SHA256 BIT(7)
+#define WPA_KEY_MGMT_PSK_SHA256 BIT(8)
+#define WPA_KEY_MGMT_WPS BIT(9)
+#define WPA_KEY_MGMT_SAE BIT(10)
+#define WPA_KEY_MGMT_FT_SAE BIT(11)
+#define WPA_KEY_MGMT_WAPI_PSK BIT(12)
+#define WPA_KEY_MGMT_WAPI_CERT BIT(13)
+#define WPA_KEY_MGMT_CCKM BIT(14)
+#define WPA_KEY_MGMT_OSEN BIT(15)
+#define WPA_KEY_MGMT_IEEE8021X_SUITE_B BIT(16)
+#define WPA_KEY_MGMT_IEEE8021X_SUITE_B_192 BIT(17)
+#define WPA_KEY_MGMT_FILS_SHA256 BIT(18)
+#define WPA_KEY_MGMT_FILS_SHA384 BIT(19)
+#define WPA_KEY_MGMT_FT_FILS_SHA256 BIT(20)
+#define WPA_KEY_MGMT_FT_FILS_SHA384 BIT(21)
+#define WPA_KEY_MGMT_OWE BIT(22)
+#define WPA_KEY_MGMT_DPP BIT(23)
+#define WPA_KEY_MGMT_FT_IEEE8021X_SHA384 BIT(24)
+#define WPA_KEY_MGMT_PASN BIT(25)
+
+
+#define WPA_KEY_MGMT_FT (WPA_KEY_MGMT_FT_PSK | \
+ WPA_KEY_MGMT_FT_IEEE8021X | \
+ WPA_KEY_MGMT_FT_IEEE8021X_SHA384 | \
+ WPA_KEY_MGMT_FT_SAE | \
+ WPA_KEY_MGMT_FT_FILS_SHA256 | \
+ WPA_KEY_MGMT_FT_FILS_SHA384)
+
+static inline int wpa_key_mgmt_wpa_ieee8021x(int akm)
+{
+ return !!(akm & (WPA_KEY_MGMT_IEEE8021X |
+ WPA_KEY_MGMT_FT_IEEE8021X |
+ WPA_KEY_MGMT_FT_IEEE8021X_SHA384 |
+ WPA_KEY_MGMT_CCKM |
+ WPA_KEY_MGMT_OSEN |
+ WPA_KEY_MGMT_IEEE8021X_SHA256 |
+ WPA_KEY_MGMT_IEEE8021X_SUITE_B |
+ WPA_KEY_MGMT_IEEE8021X_SUITE_B_192 |
+ WPA_KEY_MGMT_FILS_SHA256 |
+ WPA_KEY_MGMT_FILS_SHA384 |
+ WPA_KEY_MGMT_FT_FILS_SHA256 |
+ WPA_KEY_MGMT_FT_FILS_SHA384));
+}
+
+static inline int wpa_key_mgmt_wpa_psk_no_sae(int akm)
+{
+ return !!(akm & (WPA_KEY_MGMT_PSK |
+ WPA_KEY_MGMT_FT_PSK |
+ WPA_KEY_MGMT_PSK_SHA256));
+}
+
+static inline int wpa_key_mgmt_wpa_psk(int akm)
+{
+ return !!(akm & (WPA_KEY_MGMT_PSK |
+ WPA_KEY_MGMT_FT_PSK |
+ WPA_KEY_MGMT_PSK_SHA256 |
+ WPA_KEY_MGMT_SAE |
+ WPA_KEY_MGMT_FT_SAE));
+}
+
+static inline int wpa_key_mgmt_ft(int akm)
+{
+ return !!(akm & WPA_KEY_MGMT_FT);
+}
+
+static inline int wpa_key_mgmt_only_ft(int akm)
+{
+ int ft = wpa_key_mgmt_ft(akm);
+ akm &= ~WPA_KEY_MGMT_FT;
+ return ft && !akm;
+}
+
+static inline int wpa_key_mgmt_ft_psk(int akm)
+{
+ return !!(akm & WPA_KEY_MGMT_FT_PSK);
+}
+
+static inline int wpa_key_mgmt_sae(int akm)
+{
+ return !!(akm & (WPA_KEY_MGMT_SAE |
+ WPA_KEY_MGMT_FT_SAE));
+}
+
+static inline int wpa_key_mgmt_fils(int akm)
+{
+ return !!(akm & (WPA_KEY_MGMT_FILS_SHA256 |
+ WPA_KEY_MGMT_FILS_SHA384 |
+ WPA_KEY_MGMT_FT_FILS_SHA256 |
+ WPA_KEY_MGMT_FT_FILS_SHA384));
+}
+
+static inline int wpa_key_mgmt_sha256(int akm)
+{
+ return !!(akm & (WPA_KEY_MGMT_PSK_SHA256 |
+ WPA_KEY_MGMT_IEEE8021X_SHA256 |
+ WPA_KEY_MGMT_SAE |
+ WPA_KEY_MGMT_FT_SAE |
+ WPA_KEY_MGMT_OSEN |
+ WPA_KEY_MGMT_IEEE8021X_SUITE_B |
+ WPA_KEY_MGMT_FILS_SHA256 |
+ WPA_KEY_MGMT_FT_FILS_SHA256));
+}
+
+static inline int wpa_key_mgmt_sha384(int akm)
+{
+ return !!(akm & (WPA_KEY_MGMT_IEEE8021X_SUITE_B_192 |
+ WPA_KEY_MGMT_FT_IEEE8021X_SHA384 |
+ WPA_KEY_MGMT_FILS_SHA384 |
+ WPA_KEY_MGMT_FT_FILS_SHA384));
+}
+
+static inline int wpa_key_mgmt_suite_b(int akm)
+{
+ return !!(akm & (WPA_KEY_MGMT_IEEE8021X_SUITE_B |
+ WPA_KEY_MGMT_IEEE8021X_SUITE_B_192));
+}
+
+static inline int wpa_key_mgmt_wpa(int akm)
+{
+ return wpa_key_mgmt_wpa_ieee8021x(akm) ||
+ wpa_key_mgmt_wpa_psk(akm) ||
+ wpa_key_mgmt_fils(akm) ||
+ wpa_key_mgmt_sae(akm) ||
+ akm == WPA_KEY_MGMT_OWE ||
+ akm == WPA_KEY_MGMT_DPP;
+}
+
+static inline int wpa_key_mgmt_wpa_any(int akm)
+{
+ return wpa_key_mgmt_wpa(akm) || (akm & WPA_KEY_MGMT_WPA_NONE);
+}
+
+static inline int wpa_key_mgmt_cckm(int akm)
+{
+ return akm == WPA_KEY_MGMT_CCKM;
+}
+
+
+#define WPA_PROTO_WPA BIT(0)
+#define WPA_PROTO_RSN BIT(1)
+#define WPA_PROTO_WAPI BIT(2)
+#define WPA_PROTO_OSEN BIT(3)
+
+#define WPA_AUTH_ALG_OPEN BIT(0)
+#define WPA_AUTH_ALG_SHARED BIT(1)
+#define WPA_AUTH_ALG_LEAP BIT(2)
+#define WPA_AUTH_ALG_FT BIT(3)
+#define WPA_AUTH_ALG_SAE BIT(4)
+#define WPA_AUTH_ALG_FILS BIT(5)
+#define WPA_AUTH_ALG_FILS_SK_PFS BIT(6)
+
+static inline int wpa_auth_alg_fils(int alg)
+{
+ return !!(alg & (WPA_AUTH_ALG_FILS | WPA_AUTH_ALG_FILS_SK_PFS));
+}
+
+enum wpa_alg {
+ WPA_ALG_NONE,
+ WPA_ALG_WEP,
+ WPA_ALG_TKIP,
+ WPA_ALG_CCMP,
+ WPA_ALG_BIP_CMAC_128,
+ WPA_ALG_GCMP,
+ WPA_ALG_SMS4,
+ WPA_ALG_KRK,
+ WPA_ALG_GCMP_256,
+ WPA_ALG_CCMP_256,
+ WPA_ALG_BIP_GMAC_128,
+ WPA_ALG_BIP_GMAC_256,
+ WPA_ALG_BIP_CMAC_256
+};
+
+static inline int wpa_alg_bip(enum wpa_alg alg)
+{
+ return alg == WPA_ALG_BIP_CMAC_128 ||
+ alg == WPA_ALG_BIP_GMAC_128 ||
+ alg == WPA_ALG_BIP_GMAC_256 ||
+ alg == WPA_ALG_BIP_CMAC_256;
+}
+
+/**
+ * enum wpa_states - wpa_supplicant state
+ *
+ * These enumeration values are used to indicate the current wpa_supplicant
+ * state (wpa_s->wpa_state). The current state can be retrieved with
+ * wpa_supplicant_get_state() function and the state can be changed by calling
+ * wpa_supplicant_set_state(). In WPA state machine (wpa.c and preauth.c), the
+ * wrapper functions wpa_sm_get_state() and wpa_sm_set_state() should be used
+ * to access the state variable.
+ */
+enum wpa_states {
+ /**
+ * WPA_DISCONNECTED - Disconnected state
+ *
+ * This state indicates that client is not associated, but is likely to
+ * start looking for an access point. This state is entered when a
+ * connection is lost.
+ */
+ WPA_DISCONNECTED,
+
+ /**
+ * WPA_INTERFACE_DISABLED - Interface disabled
+ *
+ * This state is entered if the network interface is disabled, e.g.,
+ * due to rfkill. wpa_supplicant refuses any new operations that would
+ * use the radio until the interface has been enabled.
+ */
+ WPA_INTERFACE_DISABLED,
+
+ /**
+ * WPA_INACTIVE - Inactive state (wpa_supplicant disabled)
+ *
+ * This state is entered if there are no enabled networks in the
+ * configuration. wpa_supplicant is not trying to associate with a new
+ * network and external interaction (e.g., ctrl_iface call to add or
+ * enable a network) is needed to start association.
+ */
+ WPA_INACTIVE,
+
+ /**
+ * WPA_SCANNING - Scanning for a network
+ *
+ * This state is entered when wpa_supplicant starts scanning for a
+ * network.
+ */
+ WPA_SCANNING,
+
+ /**
+ * WPA_AUTHENTICATING - Trying to authenticate with a BSS/SSID
+ *
+ * This state is entered when wpa_supplicant has found a suitable BSS
+ * to authenticate with and the driver is configured to try to
+ * authenticate with this BSS. This state is used only with drivers
+ * that use wpa_supplicant as the SME.
+ */
+ WPA_AUTHENTICATING,
+
+ /**
+ * WPA_ASSOCIATING - Trying to associate with a BSS/SSID
+ *
+ * This state is entered when wpa_supplicant has found a suitable BSS
+ * to associate with and the driver is configured to try to associate
+ * with this BSS in ap_scan=1 mode. When using ap_scan=2 mode, this
+ * state is entered when the driver is configured to try to associate
+ * with a network using the configured SSID and security policy.
+ */
+ WPA_ASSOCIATING,
+
+ /**
+ * WPA_ASSOCIATED - Association completed
+ *
+ * This state is entered when the driver reports that association has
+ * been successfully completed with an AP. If IEEE 802.1X is used
+ * (with or without WPA/WPA2), wpa_supplicant remains in this state
+ * until the IEEE 802.1X/EAPOL authentication has been completed.
+ */
+ WPA_ASSOCIATED,
+
+ /**
+ * WPA_4WAY_HANDSHAKE - WPA 4-Way Key Handshake in progress
+ *
+ * This state is entered when WPA/WPA2 4-Way Handshake is started. In
+ * case of WPA-PSK, this happens when receiving the first EAPOL-Key
+ * frame after association. In case of WPA-EAP, this state is entered
+ * when the IEEE 802.1X/EAPOL authentication has been completed.
+ */
+ WPA_4WAY_HANDSHAKE,
+
+ /**
+ * WPA_GROUP_HANDSHAKE - WPA Group Key Handshake in progress
+ *
+ * This state is entered when 4-Way Key Handshake has been completed
+ * (i.e., when the supplicant sends out message 4/4) and when Group
+ * Key rekeying is started by the AP (i.e., when supplicant receives
+ * message 1/2).
+ */
+ WPA_GROUP_HANDSHAKE,
+
+ /**
+ * WPA_COMPLETED - All authentication completed
+ *
+ * This state is entered when the full authentication process is
+ * completed. In case of WPA2, this happens when the 4-Way Handshake is
+ * successfully completed. With WPA, this state is entered after the
+ * Group Key Handshake; with IEEE 802.1X (non-WPA) connection is
+ * completed after dynamic keys are received (or if not used, after
+ * the EAP authentication has been completed). With static WEP keys and
+ * plaintext connections, this state is entered when an association
+ * has been completed.
+ *
+ * This state indicates that the supplicant has completed its
+ * processing for the association phase and that data connection is
+ * fully configured.
+ */
+ WPA_COMPLETED
+};
+
+#define MLME_SETPROTECTION_PROTECT_TYPE_NONE 0
+#define MLME_SETPROTECTION_PROTECT_TYPE_RX 1
+#define MLME_SETPROTECTION_PROTECT_TYPE_TX 2
+#define MLME_SETPROTECTION_PROTECT_TYPE_RX_TX 3
+
+#define MLME_SETPROTECTION_KEY_TYPE_GROUP 0
+#define MLME_SETPROTECTION_KEY_TYPE_PAIRWISE 1
+
+
+/**
+ * enum mfp_options - Management frame protection (IEEE 802.11w) options
+ */
+enum mfp_options {
+ NO_MGMT_FRAME_PROTECTION = 0,
+ MGMT_FRAME_PROTECTION_OPTIONAL = 1,
+ MGMT_FRAME_PROTECTION_REQUIRED = 2,
+};
+#define MGMT_FRAME_PROTECTION_DEFAULT 3
+
+/**
+ * enum hostapd_hw_mode - Hardware mode
+ */
+enum hostapd_hw_mode {
+ HOSTAPD_MODE_IEEE80211B,
+ HOSTAPD_MODE_IEEE80211G,
+ HOSTAPD_MODE_IEEE80211A,
+ HOSTAPD_MODE_IEEE80211AD,
+ HOSTAPD_MODE_IEEE80211ANY,
+ NUM_HOSTAPD_MODES
+};
+
+/**
+ * enum wpa_ctrl_req_type - Control interface request types
+ */
+enum wpa_ctrl_req_type {
+ WPA_CTRL_REQ_UNKNOWN,
+ WPA_CTRL_REQ_EAP_IDENTITY,
+ WPA_CTRL_REQ_EAP_PASSWORD,
+ WPA_CTRL_REQ_EAP_NEW_PASSWORD,
+ WPA_CTRL_REQ_EAP_PIN,
+ WPA_CTRL_REQ_EAP_OTP,
+ WPA_CTRL_REQ_EAP_PASSPHRASE,
+ WPA_CTRL_REQ_SIM,
+ WPA_CTRL_REQ_PSK_PASSPHRASE,
+ WPA_CTRL_REQ_EXT_CERT_CHECK,
+ NUM_WPA_CTRL_REQS
+};
+
+/* Maximum number of EAP methods to store for EAP server user information */
+#define EAP_MAX_METHODS 8
+
+enum mesh_plink_state {
+ PLINK_IDLE = 1,
+ PLINK_OPN_SNT,
+ PLINK_OPN_RCVD,
+ PLINK_CNF_RCVD,
+ PLINK_ESTAB,
+ PLINK_HOLDING,
+ PLINK_BLOCKED, /* not defined in the IEEE 802.11 standard */
+};
+
+enum set_band {
+ WPA_SETBAND_AUTO = 0,
+ WPA_SETBAND_5G = BIT(0),
+ WPA_SETBAND_2G = BIT(1),
+ WPA_SETBAND_6G = BIT(2),
+};
+
+enum wpa_radio_work_band {
+ BAND_2_4_GHZ = BIT(0),
+ BAND_5_GHZ = BIT(1),
+ BAND_60_GHZ = BIT(2),
+};
+
+enum beacon_rate_type {
+ BEACON_RATE_LEGACY,
+ BEACON_RATE_HT,
+ BEACON_RATE_VHT,
+ BEACON_RATE_HE
+};
+
+enum eap_proxy_sim_state {
+ SIM_STATE_ERROR,
+};
+
+#define OCE_STA BIT(0)
+#define OCE_STA_CFON BIT(1)
+#define OCE_AP BIT(2)
+
+/* enum chan_width - Channel width definitions */
+enum chan_width {
+ CHAN_WIDTH_20_NOHT,
+ CHAN_WIDTH_20,
+ CHAN_WIDTH_40,
+ CHAN_WIDTH_80,
+ CHAN_WIDTH_80P80,
+ CHAN_WIDTH_160,
+ CHAN_WIDTH_2160,
+ CHAN_WIDTH_4320,
+ CHAN_WIDTH_6480,
+ CHAN_WIDTH_8640,
+ CHAN_WIDTH_UNKNOWN
+};
+
+enum key_flag {
+ KEY_FLAG_MODIFY = BIT(0),
+ KEY_FLAG_DEFAULT = BIT(1),
+ KEY_FLAG_RX = BIT(2),
+ KEY_FLAG_TX = BIT(3),
+ KEY_FLAG_GROUP = BIT(4),
+ KEY_FLAG_PAIRWISE = BIT(5),
+ KEY_FLAG_PMK = BIT(6),
+ /* Used flag combinations */
+ KEY_FLAG_RX_TX = KEY_FLAG_RX | KEY_FLAG_TX,
+ KEY_FLAG_GROUP_RX_TX = KEY_FLAG_GROUP | KEY_FLAG_RX_TX,
+ KEY_FLAG_GROUP_RX_TX_DEFAULT = KEY_FLAG_GROUP_RX_TX |
+ KEY_FLAG_DEFAULT,
+ KEY_FLAG_GROUP_RX = KEY_FLAG_GROUP | KEY_FLAG_RX,
+ KEY_FLAG_GROUP_TX_DEFAULT = KEY_FLAG_GROUP | KEY_FLAG_TX |
+ KEY_FLAG_DEFAULT,
+ KEY_FLAG_PAIRWISE_RX_TX = KEY_FLAG_PAIRWISE | KEY_FLAG_RX_TX,
+ KEY_FLAG_PAIRWISE_RX = KEY_FLAG_PAIRWISE | KEY_FLAG_RX,
+ KEY_FLAG_PAIRWISE_RX_TX_MODIFY = KEY_FLAG_PAIRWISE_RX_TX |
+ KEY_FLAG_MODIFY,
+ /* Max allowed flags for each key type */
+ KEY_FLAG_PAIRWISE_MASK = KEY_FLAG_PAIRWISE_RX_TX_MODIFY,
+ KEY_FLAG_GROUP_MASK = KEY_FLAG_GROUP_RX_TX_DEFAULT,
+ KEY_FLAG_PMK_MASK = KEY_FLAG_PMK,
+};
+
+static inline int check_key_flag(enum key_flag key_flag)
+{
+ return !!(!key_flag ||
+ ((key_flag & (KEY_FLAG_PAIRWISE | KEY_FLAG_MODIFY)) &&
+ (key_flag & ~KEY_FLAG_PAIRWISE_MASK)) ||
+ ((key_flag & KEY_FLAG_GROUP) &&
+ (key_flag & ~KEY_FLAG_GROUP_MASK)) ||
+ ((key_flag & KEY_FLAG_PMK) &&
+ (key_flag & ~KEY_FLAG_PMK_MASK)));
+}
+
+enum ptk0_rekey_handling {
+ PTK0_REKEY_ALLOW_ALWAYS,
+ PTK0_REKEY_ALLOW_LOCAL_OK,
+ PTK0_REKEY_ALLOW_NEVER
+};
+
+#endif /* DEFS_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/dhcp.h b/ap/app/wpa_supplicant-2.10/src/common/dhcp.h
new file mode 100755
index 0000000..7dc67d5
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/dhcp.h
@@ -0,0 +1,263 @@
+/*
+ * DHCP definitions
+ * Copyright (c) 2014-2017, Qualcomm Atheros, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef DHCP_H
+#define DHCP_H
+
+#include <netinet/ip.h>
+#if __FAVOR_BSD
+#include <netinet/udp.h>
+#else
+#define __FAVOR_BSD 1
+#include <netinet/udp.h>
+#undef __FAVOR_BSD
+#endif
+
+#define DHCP_SERVER_PORT 67
+#define DHCP_CLIENT_PORT 68
+
+struct dhcp_data {
+ u8 op;
+ u8 htype;
+ u8 hlen;
+ u8 hops;
+ be32 xid;
+ be16 secs;
+ be16 flags;
+ be32 client_ip;
+ be32 your_ip;
+ be32 server_ip;
+ be32 relay_ip;
+ u8 hw_addr[16];
+ u8 serv_name[64];
+ u8 boot_file[128];
+} STRUCT_PACKED;
+
+struct bootp_pkt {
+ struct ip iph;
+ struct udphdr udph;
+ u8 op;
+ u8 htype;
+ u8 hlen;
+ u8 hops;
+ be32 xid;
+ be16 secs;
+ be16 flags;
+ be32 client_ip;
+ be32 your_ip;
+ be32 server_ip;
+ be32 relay_ip;
+ u8 hw_addr[16];
+ u8 serv_name[64];
+ u8 boot_file[128];
+ u8 exten[312];
+} STRUCT_PACKED;
+
+#define DHCP_MAGIC 0x63825363
+
+/*
+ * IANA DHCP/BOOTP registry
+ * http://www.iana.org/assignments/bootp-dhcp-parameters/bootp-dhcp-parameters.xhtml
+*/
+enum dhcp_options {
+ DHCP_OPT_PAD = 0,
+ DHCP_OPT_SUBNET_MASK = 1,
+ DHCP_OPT_TIME_OFFSET = 2,
+ DHCP_OPT_ROUTER = 3,
+ DHCP_OPT_TIME_SERVER = 4,
+ DHCP_OPT_NAME_SERVER = 5,
+ DHCP_OPT_DOMAIN_NAME_SERVER = 6,
+ DHCP_OPT_LOG_SERVER = 7,
+ DHCP_OPT_QUOTES_SERVER = 8,
+ DHCP_OPT_LPR_SERVER = 9,
+ DHCP_OPT_IMPRESS_SERVER = 10,
+ DHCP_OPT_RLP_SERVER = 11,
+ DHCP_OPT_HOSTNAME = 12,
+ DHCP_OPT_BOOT_FILE_SIZE = 13,
+ DHCP_OPT_MERIT_DUMP_FILE = 14,
+ DHCP_OPT_DOMAIN_NAME = 15,
+ DHCP_OPT_SWAP_SERVER = 16,
+ DHCP_OPT_ROOT_PATH = 17,
+ DHCP_OPT_EXTENSION_PATH = 18,
+ DHCP_OPT_FORWARD = 19,
+ DHCP_OPT_SRC_RTE = 20,
+ DHCP_OPT_POLICY_FILTER = 21,
+ DHCP_OPT_MAX_DG_ASSEMBLY = 22,
+ DHCP_OPT_DEFAULT_IP_TTL = 23,
+ DHCP_OPT_MTU_TIMEOUT = 24,
+ DHCP_OPT_MTU_PLATEAU = 25,
+ DHCP_OPT_MTU_INTERFACE = 26,
+ DHCP_OPT_ALL_SUBNETS_LOCAL = 27,
+ DHCP_OPT_BROADCAST_ADDRESS = 28,
+ DHCP_OPT_MASK_DISCOVERY = 29,
+ DHCP_OPT_MASK_SUPPLIER = 30,
+ DHCP_OPT_ROUTER_DISCOVERY = 31,
+ DHCP_OPT_ROUTER_SOLICITATION_ADDRESS = 32,
+ DHCP_OPT_STATIC_ROUTE = 33,
+ DHCP_OPT_TRAILERS = 34,
+ DHCP_OPT_ARP_TIMEOUT = 35,
+ DHCP_OPT_ETHERNET = 36,
+ DHCP_OPT_TCP_DEFAULT_TTL = 37,
+ DHCP_OPT_TCP_KEEPALIVE_INTERVAL = 38,
+ DHCP_OPT_TCP_KEEPALIVE_GARBAGE = 39,
+ DHCP_OPT_NIS_DOMAIN = 40,
+ DHCP_OPT_NIS_SERVERS = 41,
+ DHCP_OPT_NTP_SERVERS = 42,
+ DHCP_OPT_VENDOR_SPECIFIC = 43,
+ DHCP_OPT_NETBIOS_NAME_SERVER = 44,
+ DHCP_OPT_NETBIOS_DISTRIBUTION_SERVER = 45,
+ DHCP_OPT_NETBIOS_NODE_TYPE = 46,
+ DHCP_OPT_NETBIOS_SCOPE = 47,
+ DHCP_OPT_FONT_SERVER = 48,
+ DHCP_OPT_DISPLAY_MANAGER = 49,
+ DHCP_OPT_REQUESTED_IP_ADDRESS = 50,
+ DHCP_OPT_IP_ADDRESS_LEASE_TIME = 51,
+ DHCP_OPT_OVERLOAD = 52,
+ DHCP_OPT_MSG_TYPE = 53,
+ DHCP_OPT_SERVER_ID = 54,
+ DHCP_OPT_PARAMETER_REQ_LIST = 55,
+ DHCP_OPT_MESSAGE = 56,
+ DHCP_OPT_MAX_MESSAGE_SIZE = 57,
+ DHCP_OPT_RENEWAL_TIME = 58,
+ DHCP_OPT_REBINDING_TIME = 59,
+ DHCP_OPT_VENDOR_CLASS_ID = 60,
+ DHCP_OPT_CLIENT_ID = 61,
+ DHCP_OPT_NETWARE_IP_DOMAIN = 62,
+ DHCP_OPT_NETWARE_IP_OPTION = 63,
+ DHCP_OPT_NIS_V3_DOMAIN = 64,
+ DHCP_OPT_NIS_V3_SERVERS = 65,
+ DHCP_OPT_TFTP_SERVER_NAME = 66,
+ DHCP_OPT_BOOT_FILE_NAME = 67,
+ DHCP_OPT_HOME_AGENT_ADDRESSES = 68,
+ DHCP_OPT_SMTP_SERVER = 69,
+ DHCP_OPT_POP3_SERVER = 70,
+ DHCP_OPT_NNTP_SERVER = 71,
+ DHCP_OPT_WWW_SERVER = 72,
+ DHCP_OPT_FINGER_SERVER = 73,
+ DHCP_OPT_IRC_SERVER = 74,
+ DHCP_OPT_STREETTALK_SERVER = 75,
+ DHCP_OPT_STDA_SERVER = 76,
+ DHCP_OPT_USER_CLASS = 77,
+ DHCP_OPT_DIRECTORY_AGENT = 78,
+ DHCP_OPT_SERVICE_SCOPE = 79,
+ DHCP_OPT_RAPID_COMMIT = 80,
+ DHCP_OPT_CLIENT_FQDN = 81,
+ DHCP_OPT_RELAY_AGENT_INFO = 82,
+ DHCP_OPT_ISNS = 83,
+ DHCP_OPT_NDS_SERVERS = 85,
+ DHCP_OPT_NDS_TREE_NAME = 86,
+ DHCP_OPT_NDS_CONTEXT = 87,
+ DHCP_OPT_BCMCS_CONTROLLER_DOMAIN_NAME_LIST = 88,
+ DHCP_OPT_BCMCS_CONTROLLER_IPV4_ADDRESS = 89,
+ DHCP_OPT_AUTHENTICATION = 90,
+ DHCP_OPT_CLIENT_LAST_TRANSACTION_TIME = 91,
+ DHCP_OPT_ASSOCIATED_IP = 92,
+ DHCP_OPT_CLIENT_SYSYEM = 93,
+ DHCP_OPT_CLIENT_NDI = 94,
+ DHCP_OPT_LDAP = 95,
+ DHCP_OPT_UUID_GUID = 97,
+ DHCP_OPT_USER_AUTH = 98,
+ DHCP_OPT_GEOCONF_CIVIC = 99,
+ DHCP_OPT_PCODE = 100,
+ DHCP_OPT_TCODE = 101,
+ DHCP_OPT_NETINFO_ADDRESS = 112,
+ DHCP_OPT_NETINFO_TAG = 113,
+ DHCP_OPT_URL = 114,
+ DHCP_OPT_AUTO_CONFIG = 116,
+ DHCP_OPT_NAME_SERVICE_SEARCH = 117,
+ DHCP_OPT_SUBNET_SELECTION = 118,
+ DHCP_OPT_DOMAIN_SEARCH = 119,
+ DHCP_OPT_SIP_SERVERS_DCP = 120,
+ DHCP_OPT_CLASSLESS_STATIC_ROUTE = 121,
+ DHCP_OPT_CCC = 122,
+ DHCP_OPT_GEOCONF = 123,
+ DHCP_OPT_V_I_VENDOR_CLASS = 124,
+ DHCP_OPT_V_I_VENDOR_SPECIFIC_INFO = 125,
+ DHCP_OPT_PANA_AGENT = 136,
+ DHCP_OPT_V4_LOST = 137,
+ DHCP_OPT_CAPWAP_AC_V4 = 138,
+ DHCP_OPT_IPV4_ADDRESS_MOS = 139,
+ DHCP_OPT_IPV4_FQDN_MOS = 140,
+ DHCP_OPT_SIP_UA_CONF = 141,
+ DHCP_OPT_IPV4_ADDRESS_ANDSF = 142,
+ DHCP_OPT_GEOLOC = 144,
+ DHCP_OPT_FORCERENEW_NONCE_CAPABLE = 145,
+ DHCP_OPT_RDNSS_SELECTION = 146,
+ DHCP_OPT_TFTP_SERVER_ADDRESS = 150,
+ DHCP_OPT_STATUS_CODE = 151,
+ DHCP_OPT_BASE_TIME = 152,
+ DHCP_OPT_START_TIME_OF_STATE = 153,
+ DHCP_OPT_QUERY_START_TIME = 154,
+ DHCP_OPT_QUERY_END_TIME = 155,
+ DHCP_OPT_STATE = 156,
+ DHCP_OPT_DATA_SOURCE = 157,
+ DHCP_OPT_V4_PCP_SERVER = 158,
+ DHCP_OPT_V4_PORTPARAMS = 159,
+ DHCP_OPT_CAPTIVE_PORTAL = 160,
+ DHCP_OPT_CONF_FILE = 209,
+ DHCP_OPT_PATH_PREFIX = 210,
+ DHCP_OPT_REBOOT_TIME = 211,
+ DHCP_OPT_6RD = 212,
+ DHCP_OPT_V4_ACCESS_DOMAIN = 213,
+ DHCP_OPT_SUBNET_ALLOCATION = 220,
+ DHCP_OPT_VSS = 221,
+ DHCP_OPT_END = 255
+};
+
+enum dhcp_message_types {
+ DHCPDISCOVER = 1,
+ DHCPOFFER = 2,
+ DHCPREQUEST = 3,
+ DHCPDECLINE = 4,
+ DHCPACK = 5,
+ DHCPNAK = 6,
+ DHCPRELEASE = 7,
+ DHCPINFORM = 8,
+ DHCPFORCERENEW = 9,
+ DHCPLEASEQUERY = 10,
+ DHCPLEASEUNASSIGNED = 11,
+ DHCPLEASEUNKNOWN = 12,
+ DHCPLEASEACTIVE = 13,
+ DHCPBULKLEASEQUERY = 14,
+ DHCPLEASEQUERYDONE = 15,
+ DHCPACTIVELEASEQUERY = 16,
+ DHCPLEASEQUERYSTATUS = 17,
+ DHCPTLS = 18,
+};
+
+enum dhcp_relay_agent_suboptions {
+ DHCP_RELAY_OPT_AGENT_CIRCUIT_ID = 1,
+ DHCP_RELAY_OPT_AGENT_REMOTE_ID = 2,
+ DHCP_RELAY_OPT_DOCSIS_DEVICE_CLASS = 4,
+ DHCP_RELAY_OPT_LINK_SELECTION = 5,
+ DHCP_RELAY_OPT_SUBSCRIBE_ID = 6,
+ DHCP_RELAY_OPT_RADIUS_ATTRIBUTES = 7,
+ DHCP_RELAY_OPT_AUTHENTICATION = 8,
+ DHCP_RELAY_OPT_VEDOR_SPECIFIC = 9,
+ DHCP_RELAY_OPT_RELAY_AGENT_FLAGS = 10,
+ DHCP_RELAY_OPT_SERVER_ID_OVERRIDE = 11,
+ DHCP_RELAY_OPT_RELAY_AGENT_ID = 12,
+ DHCP_RELAY_OPT_ACCESS_TECHNOLOGY_TYPE = 13,
+ DHCP_RELAY_OPT_ACCESS_NETWORK_NAME = 14,
+ DHCP_RELAY_OPT_ACCESS_POINT_NAME = 15,
+ DHCP_RELAY_OPT_ACCESS_POINT_BSSID = 16,
+ DHCP_RELAY_OPT_OPERATOR_ID = 17,
+ DHCP_RELAY_OPT_OPERATOR_REALM = 18,
+ DHCP_RELAY_OPT_DHCPV4_VIRTUAL_SUBNET_SELECTION = 151,
+ DHCP_RELAY_OPT_DHCPV4_VIRTUAL_SUBNET_SELECTION_CONTROL = 152,
+};
+
+enum access_technology_types {
+ ACCESS_TECHNOLOGY_VIRTUAL = 1,
+ ACCESS_TECHNOLOGY_PPP = 2,
+ ACCESS_TECHNOLOGY_ETHERNET = 3,
+ ACCESS_TECHNOLOGY_WLAN = 4,
+ ACCESS_TECHNOLOGY_WIMAX = 5,
+};
+
+#endif /* DHCP_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/dpp.h b/ap/app/wpa_supplicant-2.10/src/common/dpp.h
new file mode 100755
index 0000000..8d62a0e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/dpp.h
@@ -0,0 +1,743 @@
+/*
+ * DPP functionality shared between hostapd and wpa_supplicant
+ * Copyright (c) 2017, Qualcomm Atheros, Inc.
+ * Copyright (c) 2018-2020, The Linux Foundation
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef DPP_H
+#define DPP_H
+
+#ifdef CONFIG_DPP
+#include "utils/list.h"
+#include "common/wpa_common.h"
+#include "crypto/sha256.h"
+#include "crypto/crypto.h"
+
+struct hostapd_ip_addr;
+struct dpp_global;
+struct json_token;
+struct dpp_reconfig_id;
+
+#ifdef CONFIG_TESTING_OPTIONS
+#define DPP_VERSION (dpp_version_override)
+extern int dpp_version_override;
+#else /* CONFIG_TESTING_OPTIONS */
+#ifdef CONFIG_DPP3
+#define DPP_VERSION 3
+#elif defined(CONFIG_DPP2)
+#define DPP_VERSION 2
+#else
+#define DPP_VERSION 1
+#endif
+#endif /* CONFIG_TESTING_OPTIONS */
+
+#define DPP_HDR_LEN (4 + 2) /* OUI, OUI Type, Crypto Suite, DPP frame type */
+#define DPP_TCP_PORT 8908
+
+enum dpp_public_action_frame_type {
+ DPP_PA_AUTHENTICATION_REQ = 0,
+ DPP_PA_AUTHENTICATION_RESP = 1,
+ DPP_PA_AUTHENTICATION_CONF = 2,
+ DPP_PA_PEER_DISCOVERY_REQ = 5,
+ DPP_PA_PEER_DISCOVERY_RESP = 6,
+ DPP_PA_PKEX_V1_EXCHANGE_REQ = 7,
+ DPP_PA_PKEX_EXCHANGE_RESP = 8,
+ DPP_PA_PKEX_COMMIT_REVEAL_REQ = 9,
+ DPP_PA_PKEX_COMMIT_REVEAL_RESP = 10,
+ DPP_PA_CONFIGURATION_RESULT = 11,
+ DPP_PA_CONNECTION_STATUS_RESULT = 12,
+ DPP_PA_PRESENCE_ANNOUNCEMENT = 13,
+ DPP_PA_RECONFIG_ANNOUNCEMENT = 14,
+ DPP_PA_RECONFIG_AUTH_REQ = 15,
+ DPP_PA_RECONFIG_AUTH_RESP = 16,
+ DPP_PA_RECONFIG_AUTH_CONF = 17,
+ DPP_PA_PKEX_EXCHANGE_REQ = 18,
+};
+
+enum dpp_attribute_id {
+ DPP_ATTR_STATUS = 0x1000,
+ DPP_ATTR_I_BOOTSTRAP_KEY_HASH = 0x1001,
+ DPP_ATTR_R_BOOTSTRAP_KEY_HASH = 0x1002,
+ DPP_ATTR_I_PROTOCOL_KEY = 0x1003,
+ DPP_ATTR_WRAPPED_DATA = 0x1004,
+ DPP_ATTR_I_NONCE = 0x1005,
+ DPP_ATTR_I_CAPABILITIES = 0x1006,
+ DPP_ATTR_R_NONCE = 0x1007,
+ DPP_ATTR_R_CAPABILITIES = 0x1008,
+ DPP_ATTR_R_PROTOCOL_KEY = 0x1009,
+ DPP_ATTR_I_AUTH_TAG = 0x100A,
+ DPP_ATTR_R_AUTH_TAG = 0x100B,
+ DPP_ATTR_CONFIG_OBJ = 0x100C,
+ DPP_ATTR_CONNECTOR = 0x100D,
+ DPP_ATTR_CONFIG_ATTR_OBJ = 0x100E,
+ DPP_ATTR_BOOTSTRAP_KEY = 0x100F,
+ DPP_ATTR_OWN_NET_NK_HASH = 0x1011,
+ DPP_ATTR_FINITE_CYCLIC_GROUP = 0x1012,
+ DPP_ATTR_ENCRYPTED_KEY = 0x1013,
+ DPP_ATTR_ENROLLEE_NONCE = 0x1014,
+ DPP_ATTR_CODE_IDENTIFIER = 0x1015,
+ DPP_ATTR_TRANSACTION_ID = 0x1016,
+ DPP_ATTR_BOOTSTRAP_INFO = 0x1017,
+ DPP_ATTR_CHANNEL = 0x1018,
+ DPP_ATTR_PROTOCOL_VERSION = 0x1019,
+ DPP_ATTR_ENVELOPED_DATA = 0x101A,
+ DPP_ATTR_SEND_CONN_STATUS = 0x101B,
+ DPP_ATTR_CONN_STATUS = 0x101C,
+ DPP_ATTR_RECONFIG_FLAGS = 0x101D,
+ DPP_ATTR_C_SIGN_KEY_HASH = 0x101E,
+ DPP_ATTR_CSR_ATTR_REQ = 0x101F,
+ DPP_ATTR_A_NONCE = 0x1020,
+ DPP_ATTR_E_PRIME_ID = 0x1021,
+ DPP_ATTR_CONFIGURATOR_NONCE = 0x1022,
+};
+
+enum dpp_status_error {
+ DPP_STATUS_OK = 0,
+ DPP_STATUS_NOT_COMPATIBLE = 1,
+ DPP_STATUS_AUTH_FAILURE = 2,
+ DPP_STATUS_UNWRAP_FAILURE = 3,
+ DPP_STATUS_BAD_GROUP = 4,
+ DPP_STATUS_CONFIGURE_FAILURE = 5,
+ DPP_STATUS_RESPONSE_PENDING = 6,
+ DPP_STATUS_INVALID_CONNECTOR = 7,
+ DPP_STATUS_NO_MATCH = 8,
+ DPP_STATUS_CONFIG_REJECTED = 9,
+ DPP_STATUS_NO_AP = 10,
+ DPP_STATUS_CONFIGURE_PENDING = 11,
+ DPP_STATUS_CSR_NEEDED = 12,
+ DPP_STATUS_CSR_BAD = 13,
+};
+
+/* DPP Reconfig Flags object - connectorKey values */
+enum dpp_connector_key {
+ DPP_CONFIG_REUSEKEY = 0,
+ DPP_CONFIG_REPLACEKEY = 1,
+};
+
+#define DPP_CAPAB_ENROLLEE BIT(0)
+#define DPP_CAPAB_CONFIGURATOR BIT(1)
+#define DPP_CAPAB_ROLE_MASK (BIT(0) | BIT(1))
+
+#define DPP_BOOTSTRAP_MAX_FREQ 30
+#define DPP_MAX_NONCE_LEN 32
+#define DPP_MAX_HASH_LEN 64
+#define DPP_MAX_SHARED_SECRET_LEN 66
+#define DPP_CP_LEN 64
+
+struct dpp_curve_params {
+ const char *name;
+ size_t hash_len;
+ size_t aes_siv_key_len;
+ size_t nonce_len;
+ size_t prime_len;
+ const char *jwk_crv;
+ u16 ike_group;
+ const char *jws_alg;
+};
+
+enum dpp_bootstrap_type {
+ DPP_BOOTSTRAP_QR_CODE,
+ DPP_BOOTSTRAP_PKEX,
+ DPP_BOOTSTRAP_NFC_URI,
+};
+
+struct dpp_bootstrap_info {
+ struct dl_list list;
+ unsigned int id;
+ enum dpp_bootstrap_type type;
+ char *uri;
+ u8 mac_addr[ETH_ALEN];
+ char *chan;
+ char *info;
+ char *pk;
+ unsigned int freq[DPP_BOOTSTRAP_MAX_FREQ];
+ unsigned int num_freq;
+ bool channels_listed;
+ u8 version;
+ int own;
+ struct crypto_ec_key *pubkey;
+ u8 pubkey_hash[SHA256_MAC_LEN];
+ u8 pubkey_hash_chirp[SHA256_MAC_LEN];
+ const struct dpp_curve_params *curve;
+ unsigned int pkex_t; /* number of failures before dpp_pkex
+ * instantiation */
+ int nfc_negotiated; /* whether this has been used in NFC negotiated
+ * connection handover */
+ char *configurator_params;
+};
+
+#define PKEX_COUNTER_T_LIMIT 5
+
+struct dpp_pkex {
+ void *msg_ctx;
+ unsigned int initiator:1;
+ unsigned int exchange_done:1;
+ unsigned int failed:1;
+ unsigned int v2:1;
+ struct dpp_bootstrap_info *own_bi;
+ u8 own_mac[ETH_ALEN];
+ u8 peer_mac[ETH_ALEN];
+ char *identifier;
+ char *code;
+ struct crypto_ec_key *x;
+ struct crypto_ec_key *y;
+ u8 Mx[DPP_MAX_SHARED_SECRET_LEN];
+ u8 Nx[DPP_MAX_SHARED_SECRET_LEN];
+ u8 z[DPP_MAX_HASH_LEN];
+ struct crypto_ec_key *peer_bootstrap_key;
+ struct wpabuf *exchange_req;
+ struct wpabuf *exchange_resp;
+ unsigned int t; /* number of failures on code use */
+ unsigned int exch_req_wait_time;
+ unsigned int exch_req_tries;
+ unsigned int freq;
+ u8 peer_version;
+};
+
+enum dpp_akm {
+ DPP_AKM_UNKNOWN,
+ DPP_AKM_DPP,
+ DPP_AKM_PSK,
+ DPP_AKM_SAE,
+ DPP_AKM_PSK_SAE,
+ DPP_AKM_SAE_DPP,
+ DPP_AKM_PSK_SAE_DPP,
+ DPP_AKM_DOT1X,
+};
+
+enum dpp_netrole {
+ DPP_NETROLE_STA,
+ DPP_NETROLE_AP,
+ DPP_NETROLE_CONFIGURATOR,
+};
+
+struct dpp_configuration {
+ u8 ssid[32];
+ size_t ssid_len;
+ int ssid_charset;
+ enum dpp_akm akm;
+ enum dpp_netrole netrole;
+
+ /* For DPP configuration (connector) */
+ os_time_t netaccesskey_expiry;
+
+ /* TODO: groups */
+ char *group_id;
+
+ /* For legacy configuration */
+ char *passphrase;
+ u8 psk[32];
+ int psk_set;
+
+ char *csrattrs;
+};
+
+struct dpp_asymmetric_key {
+ struct dpp_asymmetric_key *next;
+ struct crypto_ec_key *csign;
+ struct crypto_ec_key *pp_key;
+ char *config_template;
+ char *connector_template;
+};
+
+#define DPP_MAX_CONF_OBJ 10
+
+struct dpp_authentication {
+ struct dpp_global *global;
+ void *msg_ctx;
+ u8 peer_version;
+ const struct dpp_curve_params *curve;
+ struct dpp_bootstrap_info *peer_bi;
+ struct dpp_bootstrap_info *own_bi;
+ struct dpp_bootstrap_info *tmp_own_bi;
+ struct dpp_bootstrap_info *tmp_peer_bi;
+ u8 waiting_pubkey_hash[SHA256_MAC_LEN];
+ int response_pending;
+ int reconfig;
+ enum dpp_connector_key reconfig_connector_key;
+ enum dpp_status_error auth_resp_status;
+ enum dpp_status_error conf_resp_status;
+ enum dpp_status_error force_conf_resp_status;
+ u8 peer_mac_addr[ETH_ALEN];
+ u8 i_nonce[DPP_MAX_NONCE_LEN];
+ u8 r_nonce[DPP_MAX_NONCE_LEN];
+ u8 e_nonce[DPP_MAX_NONCE_LEN];
+ u8 c_nonce[DPP_MAX_NONCE_LEN];
+ u8 i_capab;
+ u8 r_capab;
+ enum dpp_netrole e_netrole;
+ struct crypto_ec_key *own_protocol_key;
+ struct crypto_ec_key *peer_protocol_key;
+ struct crypto_ec_key *reconfig_old_protocol_key;
+ struct wpabuf *req_msg;
+ struct wpabuf *resp_msg;
+ struct wpabuf *reconfig_req_msg;
+ struct wpabuf *reconfig_resp_msg;
+ /* Intersection of possible frequencies for initiating DPP
+ * Authentication exchange */
+ unsigned int freq[DPP_BOOTSTRAP_MAX_FREQ];
+ unsigned int num_freq, freq_idx;
+ unsigned int curr_freq;
+ unsigned int neg_freq;
+ unsigned int num_freq_iters;
+ size_t secret_len;
+ u8 Mx[DPP_MAX_SHARED_SECRET_LEN];
+ size_t Mx_len;
+ u8 Nx[DPP_MAX_SHARED_SECRET_LEN];
+ size_t Nx_len;
+ u8 Lx[DPP_MAX_SHARED_SECRET_LEN];
+ size_t Lx_len;
+ u8 k1[DPP_MAX_HASH_LEN];
+ u8 k2[DPP_MAX_HASH_LEN];
+ u8 ke[DPP_MAX_HASH_LEN];
+ u8 bk[DPP_MAX_HASH_LEN];
+ int initiator;
+ int waiting_auth_resp;
+ int waiting_auth_conf;
+ int auth_req_ack;
+ unsigned int auth_resp_tries;
+ u8 allowed_roles;
+ int configurator;
+ int remove_on_tx_status;
+ int connect_on_tx_status;
+ int waiting_conf_result;
+ int waiting_conn_status_result;
+ int auth_success;
+ bool reconfig_success;
+ struct wpabuf *conf_req;
+ const struct wpabuf *conf_resp; /* owned by GAS server */
+ struct wpabuf *conf_resp_tcp;
+ struct dpp_configuration *conf_ap;
+ struct dpp_configuration *conf2_ap;
+ struct dpp_configuration *conf_sta;
+ struct dpp_configuration *conf2_sta;
+ int provision_configurator;
+ struct dpp_configurator *conf;
+ struct dpp_config_obj {
+ char *connector; /* received signedConnector */
+ u8 ssid[SSID_MAX_LEN];
+ u8 ssid_len;
+ int ssid_charset;
+ char passphrase[64];
+ u8 psk[PMK_LEN];
+ int psk_set;
+ enum dpp_akm akm;
+ struct wpabuf *c_sign_key;
+ struct wpabuf *certbag;
+ struct wpabuf *certs;
+ struct wpabuf *cacert;
+ char *server_name;
+ struct wpabuf *pp_key;
+ } conf_obj[DPP_MAX_CONF_OBJ];
+ unsigned int num_conf_obj;
+ struct dpp_asymmetric_key *conf_key_pkg;
+ struct wpabuf *net_access_key;
+ os_time_t net_access_key_expiry;
+ int send_conn_status;
+ int conn_status_requested;
+ int akm_use_selector;
+ int configurator_set;
+ u8 transaction_id;
+ u8 *csrattrs;
+ size_t csrattrs_len;
+ bool waiting_csr;
+ struct wpabuf *csr;
+ struct wpabuf *priv_key; /* DER-encoded private key used for csr */
+ bool waiting_cert;
+ char *trusted_eap_server_name;
+ struct wpabuf *cacert;
+ struct wpabuf *certbag;
+ void *cert_resp_ctx;
+ void *gas_server_ctx;
+#ifdef CONFIG_TESTING_OPTIONS
+ char *config_obj_override;
+ char *discovery_override;
+ char *groups_override;
+ unsigned int ignore_netaccesskey_mismatch:1;
+#endif /* CONFIG_TESTING_OPTIONS */
+};
+
+struct dpp_configurator {
+ struct dl_list list;
+ unsigned int id;
+ int own;
+ struct crypto_ec_key *csign;
+ u8 kid_hash[SHA256_MAC_LEN];
+ char *kid;
+ const struct dpp_curve_params *curve;
+ char *connector; /* own Connector for reconfiguration */
+ struct crypto_ec_key *connector_key;
+ struct crypto_ec_key *pp_key;
+};
+
+struct dpp_introduction {
+ u8 pmkid[PMKID_LEN];
+ u8 pmk[PMK_LEN_MAX];
+ size_t pmk_len;
+ int peer_version;
+};
+
+struct dpp_relay_config {
+ const struct hostapd_ip_addr *ipaddr;
+ const u8 *pkhash;
+
+ void *msg_ctx;
+ void *cb_ctx;
+ void (*tx)(void *ctx, const u8 *addr, unsigned int freq, const u8 *msg,
+ size_t len);
+ void (*gas_resp_tx)(void *ctx, const u8 *addr, u8 dialog_token, int prot,
+ struct wpabuf *buf);
+};
+
+struct dpp_controller_config {
+ const char *configurator_params;
+ int tcp_port;
+ u8 allowed_roles;
+ int qr_mutual;
+ enum dpp_netrole netrole;
+ void *msg_ctx;
+ void *cb_ctx;
+ int (*process_conf_obj)(void *ctx, struct dpp_authentication *auth);
+};
+
+#ifdef CONFIG_TESTING_OPTIONS
+enum dpp_test_behavior {
+ DPP_TEST_DISABLED = 0,
+ DPP_TEST_AFTER_WRAPPED_DATA_AUTH_REQ = 1,
+ DPP_TEST_AFTER_WRAPPED_DATA_AUTH_RESP = 2,
+ DPP_TEST_AFTER_WRAPPED_DATA_AUTH_CONF = 3,
+ DPP_TEST_AFTER_WRAPPED_DATA_PKEX_CR_REQ = 4,
+ DPP_TEST_AFTER_WRAPPED_DATA_PKEX_CR_RESP = 5,
+ DPP_TEST_AFTER_WRAPPED_DATA_CONF_REQ = 6,
+ DPP_TEST_AFTER_WRAPPED_DATA_CONF_RESP = 7,
+ DPP_TEST_ZERO_I_CAPAB = 8,
+ DPP_TEST_ZERO_R_CAPAB = 9,
+ DPP_TEST_NO_R_BOOTSTRAP_KEY_HASH_AUTH_REQ = 10,
+ DPP_TEST_NO_I_BOOTSTRAP_KEY_HASH_AUTH_REQ = 11,
+ DPP_TEST_NO_I_PROTO_KEY_AUTH_REQ = 12,
+ DPP_TEST_NO_I_NONCE_AUTH_REQ = 13,
+ DPP_TEST_NO_I_CAPAB_AUTH_REQ = 14,
+ DPP_TEST_NO_WRAPPED_DATA_AUTH_REQ = 15,
+ DPP_TEST_NO_STATUS_AUTH_RESP = 16,
+ DPP_TEST_NO_R_BOOTSTRAP_KEY_HASH_AUTH_RESP = 17,
+ DPP_TEST_NO_I_BOOTSTRAP_KEY_HASH_AUTH_RESP = 18,
+ DPP_TEST_NO_R_PROTO_KEY_AUTH_RESP = 19,
+ DPP_TEST_NO_R_NONCE_AUTH_RESP = 20,
+ DPP_TEST_NO_I_NONCE_AUTH_RESP = 21,
+ DPP_TEST_NO_R_CAPAB_AUTH_RESP = 22,
+ DPP_TEST_NO_R_AUTH_AUTH_RESP = 23,
+ DPP_TEST_NO_WRAPPED_DATA_AUTH_RESP = 24,
+ DPP_TEST_NO_STATUS_AUTH_CONF = 25,
+ DPP_TEST_NO_R_BOOTSTRAP_KEY_HASH_AUTH_CONF = 26,
+ DPP_TEST_NO_I_BOOTSTRAP_KEY_HASH_AUTH_CONF = 27,
+ DPP_TEST_NO_I_AUTH_AUTH_CONF = 28,
+ DPP_TEST_NO_WRAPPED_DATA_AUTH_CONF = 29,
+ DPP_TEST_I_NONCE_MISMATCH_AUTH_RESP = 30,
+ DPP_TEST_INCOMPATIBLE_R_CAPAB_AUTH_RESP = 31,
+ DPP_TEST_R_AUTH_MISMATCH_AUTH_RESP = 32,
+ DPP_TEST_I_AUTH_MISMATCH_AUTH_CONF = 33,
+ DPP_TEST_NO_FINITE_CYCLIC_GROUP_PKEX_EXCHANGE_REQ = 34,
+ DPP_TEST_NO_ENCRYPTED_KEY_PKEX_EXCHANGE_REQ = 35,
+ DPP_TEST_NO_STATUS_PKEX_EXCHANGE_RESP = 36,
+ DPP_TEST_NO_ENCRYPTED_KEY_PKEX_EXCHANGE_RESP = 37,
+ DPP_TEST_NO_BOOTSTRAP_KEY_PKEX_CR_REQ = 38,
+ DPP_TEST_NO_I_AUTH_TAG_PKEX_CR_REQ = 39,
+ DPP_TEST_NO_WRAPPED_DATA_PKEX_CR_REQ = 40,
+ DPP_TEST_NO_BOOTSTRAP_KEY_PKEX_CR_RESP = 41,
+ DPP_TEST_NO_R_AUTH_TAG_PKEX_CR_RESP = 42,
+ DPP_TEST_NO_WRAPPED_DATA_PKEX_CR_RESP = 43,
+ DPP_TEST_INVALID_ENCRYPTED_KEY_PKEX_EXCHANGE_REQ = 44,
+ DPP_TEST_INVALID_ENCRYPTED_KEY_PKEX_EXCHANGE_RESP = 45,
+ DPP_TEST_INVALID_STATUS_PKEX_EXCHANGE_RESP = 46,
+ DPP_TEST_INVALID_BOOTSTRAP_KEY_PKEX_CR_REQ = 47,
+ DPP_TEST_INVALID_BOOTSTRAP_KEY_PKEX_CR_RESP = 48,
+ DPP_TEST_I_AUTH_TAG_MISMATCH_PKEX_CR_REQ = 49,
+ DPP_TEST_R_AUTH_TAG_MISMATCH_PKEX_CR_RESP = 50,
+ DPP_TEST_NO_E_NONCE_CONF_REQ = 51,
+ DPP_TEST_NO_CONFIG_ATTR_OBJ_CONF_REQ = 52,
+ DPP_TEST_NO_WRAPPED_DATA_CONF_REQ = 53,
+ DPP_TEST_NO_E_NONCE_CONF_RESP = 54,
+ DPP_TEST_NO_CONFIG_OBJ_CONF_RESP = 55,
+ DPP_TEST_NO_STATUS_CONF_RESP = 56,
+ DPP_TEST_NO_WRAPPED_DATA_CONF_RESP = 57,
+ DPP_TEST_INVALID_STATUS_CONF_RESP = 58,
+ DPP_TEST_E_NONCE_MISMATCH_CONF_RESP = 59,
+ DPP_TEST_NO_TRANSACTION_ID_PEER_DISC_REQ = 60,
+ DPP_TEST_NO_CONNECTOR_PEER_DISC_REQ = 61,
+ DPP_TEST_NO_TRANSACTION_ID_PEER_DISC_RESP = 62,
+ DPP_TEST_NO_STATUS_PEER_DISC_RESP = 63,
+ DPP_TEST_NO_CONNECTOR_PEER_DISC_RESP = 64,
+ DPP_TEST_AUTH_RESP_IN_PLACE_OF_CONF = 65,
+ DPP_TEST_INVALID_I_PROTO_KEY_AUTH_REQ = 66,
+ DPP_TEST_INVALID_R_PROTO_KEY_AUTH_RESP = 67,
+ DPP_TEST_INVALID_R_BOOTSTRAP_KEY_HASH_AUTH_REQ = 68,
+ DPP_TEST_INVALID_I_BOOTSTRAP_KEY_HASH_AUTH_REQ = 69,
+ DPP_TEST_INVALID_R_BOOTSTRAP_KEY_HASH_AUTH_RESP = 70,
+ DPP_TEST_INVALID_I_BOOTSTRAP_KEY_HASH_AUTH_RESP = 71,
+ DPP_TEST_INVALID_R_BOOTSTRAP_KEY_HASH_AUTH_CONF = 72,
+ DPP_TEST_INVALID_I_BOOTSTRAP_KEY_HASH_AUTH_CONF = 73,
+ DPP_TEST_INVALID_STATUS_AUTH_RESP = 74,
+ DPP_TEST_INVALID_STATUS_AUTH_CONF = 75,
+ DPP_TEST_INVALID_CONFIG_ATTR_OBJ_CONF_REQ = 76,
+ DPP_TEST_INVALID_TRANSACTION_ID_PEER_DISC_RESP = 77,
+ DPP_TEST_INVALID_STATUS_PEER_DISC_RESP = 78,
+ DPP_TEST_INVALID_CONNECTOR_PEER_DISC_RESP = 79,
+ DPP_TEST_INVALID_CONNECTOR_PEER_DISC_REQ = 80,
+ DPP_TEST_INVALID_I_NONCE_AUTH_REQ = 81,
+ DPP_TEST_INVALID_TRANSACTION_ID_PEER_DISC_REQ = 82,
+ DPP_TEST_INVALID_E_NONCE_CONF_REQ = 83,
+ DPP_TEST_STOP_AT_PKEX_EXCHANGE_RESP = 84,
+ DPP_TEST_STOP_AT_PKEX_CR_REQ = 85,
+ DPP_TEST_STOP_AT_PKEX_CR_RESP = 86,
+ DPP_TEST_STOP_AT_AUTH_REQ = 87,
+ DPP_TEST_STOP_AT_AUTH_RESP = 88,
+ DPP_TEST_STOP_AT_AUTH_CONF = 89,
+ DPP_TEST_STOP_AT_CONF_REQ = 90,
+ DPP_TEST_REJECT_CONFIG = 91,
+ DPP_TEST_NO_PROTOCOL_VERSION_PEER_DISC_REQ = 92,
+ DPP_TEST_NO_PROTOCOL_VERSION_PEER_DISC_RESP = 93,
+};
+
+extern enum dpp_test_behavior dpp_test;
+extern u8 dpp_pkex_own_mac_override[ETH_ALEN];
+extern u8 dpp_pkex_peer_mac_override[ETH_ALEN];
+extern u8 dpp_pkex_ephemeral_key_override[600];
+extern size_t dpp_pkex_ephemeral_key_override_len;
+extern u8 dpp_protocol_key_override[600];
+extern size_t dpp_protocol_key_override_len;
+extern u8 dpp_nonce_override[DPP_MAX_NONCE_LEN];
+extern size_t dpp_nonce_override_len;
+#endif /* CONFIG_TESTING_OPTIONS */
+
+void dpp_bootstrap_info_free(struct dpp_bootstrap_info *info);
+const char * dpp_bootstrap_type_txt(enum dpp_bootstrap_type type);
+int dpp_parse_uri_chan_list(struct dpp_bootstrap_info *bi,
+ const char *chan_list);
+int dpp_parse_uri_mac(struct dpp_bootstrap_info *bi, const char *mac);
+int dpp_parse_uri_info(struct dpp_bootstrap_info *bi, const char *info);
+int dpp_nfc_update_bi(struct dpp_bootstrap_info *own_bi,
+ struct dpp_bootstrap_info *peer_bi);
+struct dpp_authentication *
+dpp_alloc_auth(struct dpp_global *dpp, void *msg_ctx);
+struct hostapd_hw_modes;
+struct dpp_authentication * dpp_auth_init(struct dpp_global *dpp, void *msg_ctx,
+ struct dpp_bootstrap_info *peer_bi,
+ struct dpp_bootstrap_info *own_bi,
+ u8 dpp_allowed_roles,
+ unsigned int neg_freq,
+ struct hostapd_hw_modes *own_modes,
+ u16 num_modes);
+struct dpp_authentication *
+dpp_auth_req_rx(struct dpp_global *dpp, void *msg_ctx, u8 dpp_allowed_roles,
+ int qr_mutual, struct dpp_bootstrap_info *peer_bi,
+ struct dpp_bootstrap_info *own_bi,
+ unsigned int freq, const u8 *hdr, const u8 *attr_start,
+ size_t attr_len);
+struct wpabuf *
+dpp_auth_resp_rx(struct dpp_authentication *auth, const u8 *hdr,
+ const u8 *attr_start, size_t attr_len);
+struct wpabuf * dpp_build_conf_req(struct dpp_authentication *auth,
+ const char *json);
+struct wpabuf * dpp_build_conf_req_helper(struct dpp_authentication *auth,
+ const char *name,
+ enum dpp_netrole netrole,
+ const char *mud_url, int *opclasses);
+int dpp_auth_conf_rx(struct dpp_authentication *auth, const u8 *hdr,
+ const u8 *attr_start, size_t attr_len);
+int dpp_notify_new_qr_code(struct dpp_authentication *auth,
+ struct dpp_bootstrap_info *peer_bi);
+struct dpp_configuration * dpp_configuration_alloc(const char *type);
+int dpp_akm_psk(enum dpp_akm akm);
+int dpp_akm_sae(enum dpp_akm akm);
+int dpp_akm_legacy(enum dpp_akm akm);
+int dpp_akm_dpp(enum dpp_akm akm);
+int dpp_akm_ver2(enum dpp_akm akm);
+int dpp_configuration_valid(const struct dpp_configuration *conf);
+void dpp_configuration_free(struct dpp_configuration *conf);
+int dpp_set_configurator(struct dpp_authentication *auth, const char *cmd);
+void dpp_auth_deinit(struct dpp_authentication *auth);
+struct wpabuf *
+dpp_build_conf_resp(struct dpp_authentication *auth, const u8 *e_nonce,
+ u16 e_nonce_len, enum dpp_netrole netrole,
+ bool cert_req);
+struct wpabuf *
+dpp_conf_req_rx(struct dpp_authentication *auth, const u8 *attr_start,
+ size_t attr_len);
+int dpp_conf_resp_rx(struct dpp_authentication *auth,
+ const struct wpabuf *resp);
+enum dpp_status_error dpp_conf_result_rx(struct dpp_authentication *auth,
+ const u8 *hdr,
+ const u8 *attr_start, size_t attr_len);
+struct wpabuf * dpp_build_conf_result(struct dpp_authentication *auth,
+ enum dpp_status_error status);
+enum dpp_status_error dpp_conn_status_result_rx(struct dpp_authentication *auth,
+ const u8 *hdr,
+ const u8 *attr_start,
+ size_t attr_len,
+ u8 *ssid, size_t *ssid_len,
+ char **channel_list);
+struct wpabuf * dpp_build_conn_status_result(struct dpp_authentication *auth,
+ enum dpp_status_error result,
+ const u8 *ssid, size_t ssid_len,
+ const char *channel_list);
+struct wpabuf * dpp_alloc_msg(enum dpp_public_action_frame_type type,
+ size_t len);
+const u8 * dpp_get_attr(const u8 *buf, size_t len, u16 req_id, u16 *ret_len);
+int dpp_check_attrs(const u8 *buf, size_t len);
+int dpp_key_expired(const char *timestamp, os_time_t *expiry);
+const char * dpp_akm_str(enum dpp_akm akm);
+const char * dpp_akm_selector_str(enum dpp_akm akm);
+int dpp_configurator_get_key(const struct dpp_configurator *conf, char *buf,
+ size_t buflen);
+void dpp_configurator_free(struct dpp_configurator *conf);
+int dpp_configurator_own_config(struct dpp_authentication *auth,
+ const char *curve, int ap);
+enum dpp_status_error
+dpp_peer_intro(struct dpp_introduction *intro, const char *own_connector,
+ const u8 *net_access_key, size_t net_access_key_len,
+ const u8 *csign_key, size_t csign_key_len,
+ const u8 *peer_connector, size_t peer_connector_len,
+ os_time_t *expiry);
+int dpp_get_connector_version(const char *connector);
+struct dpp_pkex * dpp_pkex_init(void *msg_ctx, struct dpp_bootstrap_info *bi,
+ const u8 *own_mac,
+ const char *identifier, const char *code,
+ bool v2);
+struct dpp_pkex * dpp_pkex_rx_exchange_req(void *msg_ctx,
+ struct dpp_bootstrap_info *bi,
+ const u8 *own_mac,
+ const u8 *peer_mac,
+ const char *identifier,
+ const char *code,
+ const u8 *buf, size_t len, bool v2);
+struct wpabuf * dpp_pkex_rx_exchange_resp(struct dpp_pkex *pkex,
+ const u8 *peer_mac,
+ const u8 *buf, size_t len);
+struct wpabuf * dpp_pkex_rx_commit_reveal_req(struct dpp_pkex *pkex,
+ const u8 *hdr,
+ const u8 *buf, size_t len);
+int dpp_pkex_rx_commit_reveal_resp(struct dpp_pkex *pkex, const u8 *hdr,
+ const u8 *buf, size_t len);
+void dpp_pkex_free(struct dpp_pkex *pkex);
+
+char * dpp_corrupt_connector_signature(const char *connector);
+
+
+struct dpp_pfs {
+ struct crypto_ecdh *ecdh;
+ const struct dpp_curve_params *curve;
+ struct wpabuf *ie;
+ struct wpabuf *secret;
+};
+
+struct dpp_pfs * dpp_pfs_init(const u8 *net_access_key,
+ size_t net_access_key_len);
+int dpp_pfs_process(struct dpp_pfs *pfs, const u8 *peer_ie, size_t peer_ie_len);
+void dpp_pfs_free(struct dpp_pfs *pfs);
+
+struct wpabuf * dpp_build_csr(struct dpp_authentication *auth,
+ const char *name);
+int dpp_validate_csr(struct dpp_authentication *auth, const struct wpabuf *csr);
+
+struct dpp_bootstrap_info * dpp_add_qr_code(struct dpp_global *dpp,
+ const char *uri);
+struct dpp_bootstrap_info * dpp_add_nfc_uri(struct dpp_global *dpp,
+ const char *uri);
+int dpp_bootstrap_gen(struct dpp_global *dpp, const char *cmd);
+struct dpp_bootstrap_info *
+dpp_bootstrap_get_id(struct dpp_global *dpp, unsigned int id);
+int dpp_bootstrap_remove(struct dpp_global *dpp, const char *id);
+struct dpp_bootstrap_info *
+dpp_pkex_finish(struct dpp_global *dpp, struct dpp_pkex *pkex, const u8 *peer,
+ unsigned int freq);
+const char * dpp_bootstrap_get_uri(struct dpp_global *dpp, unsigned int id);
+int dpp_bootstrap_info(struct dpp_global *dpp, int id,
+ char *reply, int reply_size);
+int dpp_bootstrap_set(struct dpp_global *dpp, int id, const char *params);
+void dpp_bootstrap_find_pair(struct dpp_global *dpp, const u8 *i_bootstrap,
+ const u8 *r_bootstrap,
+ struct dpp_bootstrap_info **own_bi,
+ struct dpp_bootstrap_info **peer_bi);
+struct dpp_bootstrap_info * dpp_bootstrap_find_chirp(struct dpp_global *dpp,
+ const u8 *hash);
+int dpp_configurator_add(struct dpp_global *dpp, const char *cmd);
+int dpp_configurator_remove(struct dpp_global *dpp, const char *id);
+int dpp_configurator_get_key_id(struct dpp_global *dpp, unsigned int id,
+ char *buf, size_t buflen);
+int dpp_configurator_from_backup(struct dpp_global *dpp,
+ struct dpp_asymmetric_key *key);
+struct dpp_configurator * dpp_configurator_find_kid(struct dpp_global *dpp,
+ const u8 *kid);
+int dpp_relay_add_controller(struct dpp_global *dpp,
+ struct dpp_relay_config *config);
+int dpp_relay_rx_action(struct dpp_global *dpp, const u8 *src, const u8 *hdr,
+ const u8 *buf, size_t len, unsigned int freq,
+ const u8 *i_bootstrap, const u8 *r_bootstrap,
+ void *cb_ctx);
+int dpp_relay_rx_gas_req(struct dpp_global *dpp, const u8 *src, const u8 *data,
+ size_t data_len);
+int dpp_controller_start(struct dpp_global *dpp,
+ struct dpp_controller_config *config);
+void dpp_controller_stop(struct dpp_global *dpp);
+void dpp_controller_stop_for_ctx(struct dpp_global *dpp, void *cb_ctx);
+struct dpp_authentication * dpp_controller_get_auth(struct dpp_global *dpp,
+ unsigned int id);
+void dpp_controller_new_qr_code(struct dpp_global *dpp,
+ struct dpp_bootstrap_info *bi);
+int dpp_tcp_init(struct dpp_global *dpp, struct dpp_authentication *auth,
+ const struct hostapd_ip_addr *addr, int port,
+ const char *name, enum dpp_netrole netrole, void *msg_ctx,
+ void *cb_ctx,
+ int (*process_conf_obj)(void *ctx,
+ struct dpp_authentication *auth));
+
+struct wpabuf * dpp_build_presence_announcement(struct dpp_bootstrap_info *bi);
+void dpp_notify_chirp_received(void *msg_ctx, int id, const u8 *src,
+ unsigned int freq, const u8 *hash);
+
+struct dpp_global_config {
+ void *cb_ctx;
+ void (*remove_bi)(void *ctx, struct dpp_bootstrap_info *bi);
+};
+
+struct dpp_global * dpp_global_init(struct dpp_global_config *config);
+void dpp_global_clear(struct dpp_global *dpp);
+void dpp_global_deinit(struct dpp_global *dpp);
+
+/* dpp_reconfig.c */
+
+struct wpabuf * dpp_build_reconfig_announcement(const u8 *csign_key,
+ size_t csign_key_len,
+ const u8 *net_access_key,
+ size_t net_access_key_len,
+ struct dpp_reconfig_id *id);
+struct dpp_authentication *
+dpp_reconfig_init(struct dpp_global *dpp, void *msg_ctx,
+ struct dpp_configurator *conf, unsigned int freq, u16 group,
+ const u8 *a_nonce_attr, size_t a_nonce_len,
+ const u8 *e_id_attr, size_t e_id_len);
+struct dpp_authentication *
+dpp_reconfig_auth_req_rx(struct dpp_global *dpp, void *msg_ctx,
+ const char *own_connector,
+ const u8 *net_access_key, size_t net_access_key_len,
+ const u8 *csign_key, size_t csign_key_len,
+ unsigned int freq, const u8 *hdr,
+ const u8 *attr_start, size_t attr_len);
+struct wpabuf *
+dpp_reconfig_auth_resp_rx(struct dpp_authentication *auth, const u8 *hdr,
+ const u8 *attr_start, size_t attr_len);
+int dpp_reconfig_auth_conf_rx(struct dpp_authentication *auth, const u8 *hdr,
+ const u8 *attr_start, size_t attr_len);
+
+struct dpp_reconfig_id * dpp_gen_reconfig_id(const u8 *csign_key,
+ size_t csign_key_len,
+ const u8 *pp_key,
+ size_t pp_key_len);
+int dpp_update_reconfig_id(struct dpp_reconfig_id *id);
+void dpp_free_reconfig_id(struct dpp_reconfig_id *id);
+
+#endif /* CONFIG_DPP */
+#endif /* DPP_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/dpp_i.h b/ap/app/wpa_supplicant-2.10/src/common/dpp_i.h
new file mode 100755
index 0000000..c00b1ee
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/dpp_i.h
@@ -0,0 +1,159 @@
+/*
+ * DPP module internal definitions
+ * Copyright (c) 2017, Qualcomm Atheros, Inc.
+ * Copyright (c) 2018-2020, The Linux Foundation
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef DPP_I_H
+#define DPP_I_H
+
+#ifdef CONFIG_DPP
+
+struct dpp_global {
+ void *msg_ctx;
+ struct dl_list bootstrap; /* struct dpp_bootstrap_info */
+ struct dl_list configurator; /* struct dpp_configurator */
+#ifdef CONFIG_DPP2
+ struct dl_list controllers; /* struct dpp_relay_controller */
+ struct dpp_controller *controller;
+ struct dl_list tcp_init; /* struct dpp_connection */
+ void *cb_ctx;
+ int (*process_conf_obj)(void *ctx, struct dpp_authentication *auth);
+ void (*remove_bi)(void *ctx, struct dpp_bootstrap_info *bi);
+#endif /* CONFIG_DPP2 */
+};
+
+/* dpp.c */
+
+void dpp_build_attr_status(struct wpabuf *msg, enum dpp_status_error status);
+void dpp_build_attr_r_bootstrap_key_hash(struct wpabuf *msg, const u8 *hash);
+unsigned int dpp_next_id(struct dpp_global *dpp);
+struct wpabuf * dpp_build_conn_status(enum dpp_status_error result,
+ const u8 *ssid, size_t ssid_len,
+ const char *channel_list);
+struct json_token * dpp_parse_own_connector(const char *own_connector);
+int dpp_connector_match_groups(struct json_token *own_root,
+ struct json_token *peer_root, bool reconfig);
+int dpp_build_jwk(struct wpabuf *buf, const char *name,
+ struct crypto_ec_key *key, const char *kid,
+ const struct dpp_curve_params *curve);
+struct crypto_ec_key * dpp_parse_jwk(struct json_token *jwk,
+ const struct dpp_curve_params **key_curve);
+int dpp_prepare_channel_list(struct dpp_authentication *auth,
+ unsigned int neg_freq,
+ struct hostapd_hw_modes *own_modes, u16 num_modes);
+void dpp_auth_fail(struct dpp_authentication *auth, const char *txt);
+int dpp_gen_uri(struct dpp_bootstrap_info *bi);
+void dpp_write_adv_proto(struct wpabuf *buf);
+void dpp_write_gas_query(struct wpabuf *buf, struct wpabuf *query);
+
+/* dpp_backup.c */
+
+void dpp_free_asymmetric_key(struct dpp_asymmetric_key *key);
+struct wpabuf * dpp_build_enveloped_data(struct dpp_authentication *auth);
+int dpp_conf_resp_env_data(struct dpp_authentication *auth,
+ const u8 *env_data, size_t env_data_len);
+
+/* dpp_crypto.c */
+
+struct dpp_signed_connector_info {
+ unsigned char *payload;
+ size_t payload_len;
+};
+
+enum dpp_status_error
+dpp_process_signed_connector(struct dpp_signed_connector_info *info,
+ struct crypto_ec_key *csign_pub,
+ const char *connector);
+enum dpp_status_error
+dpp_check_signed_connector(struct dpp_signed_connector_info *info,
+ const u8 *csign_key, size_t csign_key_len,
+ const u8 *peer_connector, size_t peer_connector_len);
+const struct dpp_curve_params * dpp_get_curve_name(const char *name);
+const struct dpp_curve_params * dpp_get_curve_jwk_crv(const char *name);
+const struct dpp_curve_params * dpp_get_curve_ike_group(u16 group);
+int dpp_bi_pubkey_hash(struct dpp_bootstrap_info *bi,
+ const u8 *data, size_t data_len);
+struct crypto_ec_key * dpp_set_pubkey_point(struct crypto_ec_key *group_key,
+ const u8 *buf, size_t len);
+int dpp_hkdf_expand(size_t hash_len, const u8 *secret, size_t secret_len,
+ const char *label, u8 *out, size_t outlen);
+int dpp_hmac_vector(size_t hash_len, const u8 *key, size_t key_len,
+ size_t num_elem, const u8 *addr[], const size_t *len,
+ u8 *mac);
+int dpp_ecdh(struct crypto_ec_key *own, struct crypto_ec_key *peer,
+ u8 *secret, size_t *secret_len);
+void dpp_debug_print_key(const char *title, struct crypto_ec_key *key);
+int dpp_pbkdf2(size_t hash_len, const u8 *password, size_t password_len,
+ const u8 *salt, size_t salt_len, unsigned int iterations,
+ u8 *buf, size_t buflen);
+int dpp_get_subject_public_key(struct dpp_bootstrap_info *bi,
+ const u8 *data, size_t data_len);
+int dpp_bootstrap_key_hash(struct dpp_bootstrap_info *bi);
+int dpp_keygen(struct dpp_bootstrap_info *bi, const char *curve,
+ const u8 *privkey, size_t privkey_len);
+struct crypto_ec_key * dpp_set_keypair(const struct dpp_curve_params **curve,
+ const u8 *privkey, size_t privkey_len);
+struct crypto_ec_key * dpp_gen_keypair(const struct dpp_curve_params *curve);
+int dpp_derive_k1(const u8 *Mx, size_t Mx_len, u8 *k1, unsigned int hash_len);
+int dpp_derive_k2(const u8 *Nx, size_t Nx_len, u8 *k2, unsigned int hash_len);
+int dpp_derive_bk_ke(struct dpp_authentication *auth);
+int dpp_gen_r_auth(struct dpp_authentication *auth, u8 *r_auth);
+int dpp_gen_i_auth(struct dpp_authentication *auth, u8 *i_auth);
+int dpp_auth_derive_l_responder(struct dpp_authentication *auth);
+int dpp_auth_derive_l_initiator(struct dpp_authentication *auth);
+int dpp_derive_pmk(const u8 *Nx, size_t Nx_len, u8 *pmk, unsigned int hash_len);
+int dpp_derive_pmkid(const struct dpp_curve_params *curve,
+ struct crypto_ec_key *own_key,
+ struct crypto_ec_key *peer_key, u8 *pmkid);
+struct crypto_ec_point *
+dpp_pkex_derive_Qi(const struct dpp_curve_params *curve, const u8 *mac_init,
+ const char *code, const char *identifier,
+ struct crypto_ec **ret_ec);
+struct crypto_ec_point *
+dpp_pkex_derive_Qr(const struct dpp_curve_params *curve, const u8 *mac_resp,
+ const char *code, const char *identifier,
+ struct crypto_ec **ret_ec);
+int dpp_pkex_derive_z(const u8 *mac_init, const u8 *mac_resp,
+ u8 ver_init, u8 ver_resp,
+ const u8 *Mx, size_t Mx_len,
+ const u8 *Nx, size_t Nx_len,
+ const char *code,
+ const u8 *Kx, size_t Kx_len,
+ u8 *z, unsigned int hash_len);
+int dpp_reconfig_derive_ke_responder(struct dpp_authentication *auth,
+ const u8 *net_access_key,
+ size_t net_access_key_len,
+ struct json_token *peer_net_access_key);
+int dpp_reconfig_derive_ke_initiator(struct dpp_authentication *auth,
+ const u8 *r_proto, u16 r_proto_len,
+ struct json_token *net_access_key);
+struct crypto_ec_point * dpp_decrypt_e_id(struct crypto_ec_key *ppkey,
+ struct crypto_ec_key *a_nonce,
+ struct crypto_ec_key *e_prime_id);
+char * dpp_sign_connector(struct dpp_configurator *conf,
+ const struct wpabuf *dppcon);
+int dpp_test_gen_invalid_key(struct wpabuf *msg,
+ const struct dpp_curve_params *curve);
+
+struct dpp_reconfig_id {
+ struct crypto_ec *ec;
+ struct crypto_ec_point *e_id; /* E-id */
+ struct crypto_ec_key *csign;
+ struct crypto_ec_key *a_nonce; /* A-NONCE */
+ struct crypto_ec_key *e_prime_id; /* E'-id */
+ struct crypto_ec_key *pp_key;
+};
+
+/* dpp_tcp.c */
+
+void dpp_controller_conn_status_result_wait_timeout(void *eloop_ctx,
+ void *timeout_ctx);
+void dpp_tcp_init_flush(struct dpp_global *dpp);
+void dpp_relay_flush_controllers(struct dpp_global *dpp);
+
+#endif /* CONFIG_DPP */
+#endif /* DPP_I_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/dragonfly.h b/ap/app/wpa_supplicant-2.10/src/common/dragonfly.h
new file mode 100755
index 0000000..84d67f5
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/dragonfly.h
@@ -0,0 +1,33 @@
+/*
+ * Shared Dragonfly functionality
+ * Copyright (c) 2012-2016, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2019, The Linux Foundation
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef DRAGONFLY_H
+#define DRAGONFLY_H
+
+#define DRAGONFLY_MAX_ECC_PRIME_LEN 66
+
+struct crypto_bignum;
+struct crypto_ec;
+
+int dragonfly_suitable_group(int group, int ecc_only);
+unsigned int dragonfly_min_pwe_loop_iter(int group);
+int dragonfly_get_random_qr_qnr(const struct crypto_bignum *prime,
+ struct crypto_bignum **qr,
+ struct crypto_bignum **qnr);
+int dragonfly_is_quadratic_residue_blind(struct crypto_ec *ec,
+ const u8 *qr, const u8 *qnr,
+ const struct crypto_bignum *val);
+int dragonfly_generate_scalar(const struct crypto_bignum *order,
+ struct crypto_bignum *_rand,
+ struct crypto_bignum *_mask,
+ struct crypto_bignum *scalar);
+int dragonfly_sqrt(struct crypto_ec *ec, const struct crypto_bignum *val,
+ struct crypto_bignum *res);
+
+#endif /* DRAGONFLY_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/eapol_common.h b/ap/app/wpa_supplicant-2.10/src/common/eapol_common.h
new file mode 100755
index 0000000..d773348
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/eapol_common.h
@@ -0,0 +1,92 @@
+/*
+ * EAPOL definitions shared between hostapd and wpa_supplicant
+ * Copyright (c) 2002-2007, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef EAPOL_COMMON_H
+#define EAPOL_COMMON_H
+
+/* IEEE Std 802.1X-2004 */
+
+#ifdef _MSC_VER
+#pragma pack(push, 1)
+#endif /* _MSC_VER */
+
+struct ieee802_1x_hdr {
+ u8 version;
+ u8 type;
+ be16 length;
+ /* followed by length octets of data */
+} STRUCT_PACKED;
+
+struct ieee8023_hdr {
+ u8 dest[ETH_ALEN];
+ u8 src[ETH_ALEN];
+ be16 ethertype;
+} STRUCT_PACKED;
+
+#ifdef _MSC_VER
+#pragma pack(pop)
+#endif /* _MSC_VER */
+
+#ifdef CONFIG_MACSEC
+#define EAPOL_VERSION 3
+#else /* CONFIG_MACSEC */
+#define EAPOL_VERSION 2
+#endif /* CONFIG_MACSEC */
+
+enum { IEEE802_1X_TYPE_EAP_PACKET = 0,
+ IEEE802_1X_TYPE_EAPOL_START = 1,
+ IEEE802_1X_TYPE_EAPOL_LOGOFF = 2,
+ IEEE802_1X_TYPE_EAPOL_KEY = 3,
+ IEEE802_1X_TYPE_EAPOL_ENCAPSULATED_ASF_ALERT = 4,
+ IEEE802_1X_TYPE_EAPOL_MKA = 5,
+};
+
+enum { EAPOL_KEY_TYPE_RC4 = 1, EAPOL_KEY_TYPE_RSN = 2,
+ EAPOL_KEY_TYPE_WPA = 254 };
+
+
+#define IEEE8021X_REPLAY_COUNTER_LEN 8
+#define IEEE8021X_KEY_SIGN_LEN 16
+#define IEEE8021X_KEY_IV_LEN 16
+
+#define IEEE8021X_KEY_INDEX_FLAG 0x80
+#define IEEE8021X_KEY_INDEX_MASK 0x03
+
+#ifdef _MSC_VER
+#pragma pack(push, 1)
+#endif /* _MSC_VER */
+
+struct ieee802_1x_eapol_key {
+ u8 type;
+ /* Note: key_length is unaligned */
+ u8 key_length[2];
+ /* does not repeat within the life of the keying material used to
+ * encrypt the Key field; 64-bit NTP timestamp MAY be used here */
+ u8 replay_counter[IEEE8021X_REPLAY_COUNTER_LEN];
+ u8 key_iv[IEEE8021X_KEY_IV_LEN]; /* cryptographically random number */
+ u8 key_index; /* key flag in the most significant bit:
+ * 0 = broadcast (default key),
+ * 1 = unicast (key mapping key); key index is in the
+ * 7 least significant bits */
+ /* HMAC-MD5 message integrity check computed with MS-MPPE-Send-Key as
+ * the key */
+ u8 key_signature[IEEE8021X_KEY_SIGN_LEN];
+
+ /* followed by key: if packet body length = 44 + key length, then the
+ * key field (of key_length bytes) contains the key in encrypted form;
+ * if packet body length = 44, key field is absent and key_length
+ * represents the number of least significant octets from
+ * MS-MPPE-Send-Key attribute to be used as the keying material;
+ * RC4 key used in encryption = Key-IV + MS-MPPE-Recv-Key */
+} STRUCT_PACKED;
+
+#ifdef _MSC_VER
+#pragma pack(pop)
+#endif /* _MSC_VER */
+
+#endif /* EAPOL_COMMON_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/gas.h b/ap/app/wpa_supplicant-2.10/src/common/gas.h
new file mode 100755
index 0000000..4c93e31
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/gas.h
@@ -0,0 +1,40 @@
+/*
+ * Generic advertisement service (GAS) (IEEE 802.11u)
+ * Copyright (c) 2009, Atheros Communications
+ * Copyright (c) 2011-2012, Qualcomm Atheros
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef GAS_H
+#define GAS_H
+
+struct wpabuf * gas_build_initial_req(u8 dialog_token, size_t size);
+struct wpabuf * gas_build_comeback_req(u8 dialog_token);
+struct wpabuf * gas_build_initial_resp(u8 dialog_token, u16 status_code,
+ u16 comeback_delay, size_t size);
+struct wpabuf *
+gas_build_comeback_resp(u8 dialog_token, u16 status_code, u8 frag_id, u8 more,
+ u16 comeback_delay, size_t size);
+struct wpabuf * gas_anqp_build_initial_req(u8 dialog_token, size_t size);
+struct wpabuf * gas_anqp_build_initial_resp(u8 dialog_token, u16 status_code,
+ u16 comeback_delay, size_t size);
+struct wpabuf * gas_anqp_build_initial_resp_buf(u8 dialog_token,
+ u16 status_code,
+ u16 comeback_delay,
+ struct wpabuf *payload);
+struct wpabuf * gas_anqp_build_comeback_resp(u8 dialog_token, u16 status_code,
+ u8 frag_id, u8 more,
+ u16 comeback_delay, size_t size);
+struct wpabuf * gas_anqp_build_comeback_resp_buf(u8 dialog_token,
+ u16 status_code,
+ u8 frag_id, u8 more,
+ u16 comeback_delay,
+ struct wpabuf *payload);
+void gas_anqp_set_len(struct wpabuf *buf);
+
+u8 * gas_anqp_add_element(struct wpabuf *buf, u16 info_id);
+void gas_anqp_set_element_len(struct wpabuf *buf, u8 *len_pos);
+
+#endif /* GAS_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/gas_server.h b/ap/app/wpa_supplicant-2.10/src/common/gas_server.h
new file mode 100755
index 0000000..db00f87
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/gas_server.h
@@ -0,0 +1,49 @@
+/*
+ * Generic advertisement service (GAS) server
+ * Copyright (c) 2017, Qualcomm Atheros, Inc.
+ * Copyright (c) 2020, The Linux Foundation
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef GAS_SERVER_H
+#define GAS_SERVER_H
+
+#ifdef CONFIG_GAS_SERVER
+
+struct gas_server;
+
+struct gas_server * gas_server_init(void *ctx,
+ void (*tx)(void *ctx, int freq,
+ const u8 *da,
+ struct wpabuf *buf,
+ unsigned int wait_time));
+void gas_server_deinit(struct gas_server *gas);
+int gas_server_register(struct gas_server *gas,
+ const u8 *adv_proto_id, u8 adv_proto_id_len,
+ struct wpabuf *
+ (*req_cb)(void *ctx, void *resp_ctx, const u8 *sa,
+ const u8 *query, size_t query_len,
+ u16 *comeback_delay),
+ void (*status_cb)(void *ctx, struct wpabuf *resp,
+ int ok),
+ void *ctx);
+int gas_server_rx(struct gas_server *gas, const u8 *da, const u8 *sa,
+ const u8 *bssid, u8 categ, const u8 *data, size_t len,
+ int freq);
+void gas_server_tx_status(struct gas_server *gas, const u8 *dst, const u8 *data,
+ size_t data_len, int ack);
+int gas_server_set_resp(struct gas_server *gas, void *resp_ctx,
+ struct wpabuf *resp);
+bool gas_server_response_sent(struct gas_server *gas, void *resp_ctx);
+
+#else /* CONFIG_GAS_SERVER */
+
+static inline void gas_server_deinit(struct gas_server *gas)
+{
+}
+
+#endif /* CONFIG_GAS_SERVER */
+
+#endif /* GAS_SERVER_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/hw_features_common.h b/ap/app/wpa_supplicant-2.10/src/common/hw_features_common.h
new file mode 100755
index 0000000..0e92aa0
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/hw_features_common.h
@@ -0,0 +1,56 @@
+/*
+ * Common hostapd/wpa_supplicant HW features
+ * Copyright (c) 2002-2013, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2015, Qualcomm Atheros, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef HW_FEATURES_COMMON_H
+#define HW_FEATURES_COMMON_H
+
+#include "drivers/driver.h"
+
+struct hostapd_channel_data * hw_get_channel_chan(struct hostapd_hw_modes *mode,
+ int chan, int *freq);
+struct hostapd_channel_data *
+hw_mode_get_channel(struct hostapd_hw_modes *mode, int freq, int *chan);
+
+struct hostapd_channel_data *
+hw_get_channel_freq(enum hostapd_hw_mode mode, int freq, int *chan,
+ struct hostapd_hw_modes *hw_features, int num_hw_features);
+
+int hw_get_freq(struct hostapd_hw_modes *mode, int chan);
+int hw_get_chan(enum hostapd_hw_mode mode, int freq,
+ struct hostapd_hw_modes *hw_features, int num_hw_features);
+
+int allowed_ht40_channel_pair(enum hostapd_hw_mode mode,
+ struct hostapd_channel_data *p_chan,
+ struct hostapd_channel_data *s_chan);
+void get_pri_sec_chan(struct wpa_scan_res *bss, int *pri_chan, int *sec_chan);
+int check_40mhz_5g(struct wpa_scan_results *scan_res,
+ struct hostapd_channel_data *pri_chan,
+ struct hostapd_channel_data *sec_chan);
+int check_40mhz_2g4(struct hostapd_hw_modes *mode,
+ struct wpa_scan_results *scan_res, int pri_chan,
+ int sec_chan);
+int hostapd_set_freq_params(struct hostapd_freq_params *data,
+ enum hostapd_hw_mode mode,
+ int freq, int channel, int edmg, u8 edmg_channel,
+ int ht_enabled,
+ int vht_enabled, int he_enabled,
+ int sec_channel_offset,
+ int oper_chwidth, int center_segment0,
+ int center_segment1, u32 vht_caps,
+ struct he_capabilities *he_caps);
+void set_disable_ht40(struct ieee80211_ht_capabilities *htcaps,
+ int disabled);
+int ieee80211ac_cap_check(u32 hw, u32 conf);
+
+u32 num_chan_to_bw(int num_chans);
+int chan_bw_allowed(const struct hostapd_channel_data *chan, u32 bw,
+ int ht40_plus, int pri);
+int chan_pri_allowed(const struct hostapd_channel_data *chan);
+
+#endif /* HW_FEATURES_COMMON_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/ieee802_11_common.h b/ap/app/wpa_supplicant-2.10/src/common/ieee802_11_common.h
new file mode 100755
index 0000000..e4e4c61
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/ieee802_11_common.h
@@ -0,0 +1,342 @@
+/*
+ * IEEE 802.11 Common routines
+ * Copyright (c) 2002-2019, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef IEEE802_11_COMMON_H
+#define IEEE802_11_COMMON_H
+
+#include "defs.h"
+#include "ieee802_11_defs.h"
+
+struct element {
+ u8 id;
+ u8 datalen;
+ u8 data[];
+} STRUCT_PACKED;
+
+struct hostapd_hw_modes;
+
+#define MAX_NOF_MB_IES_SUPPORTED 5
+#define MAX_NUM_FRAG_IES_SUPPORTED 3
+
+struct mb_ies_info {
+ struct {
+ const u8 *ie;
+ u8 ie_len;
+ } ies[MAX_NOF_MB_IES_SUPPORTED];
+ u8 nof_ies;
+};
+
+struct frag_ies_info {
+ struct {
+ u8 eid;
+ u8 eid_ext;
+ const u8 *ie;
+ u8 ie_len;
+ } frags[MAX_NUM_FRAG_IES_SUPPORTED];
+
+ u8 n_frags;
+
+ /* the last parsed element ID and element extension ID */
+ u8 last_eid;
+ u8 last_eid_ext;
+};
+
+/* Parsed Information Elements */
+struct ieee802_11_elems {
+ const u8 *ssid;
+ const u8 *supp_rates;
+ const u8 *ds_params;
+ const u8 *challenge;
+ const u8 *erp_info;
+ const u8 *ext_supp_rates;
+ const u8 *wpa_ie;
+ const u8 *rsn_ie;
+ const u8 *rsnxe;
+ const u8 *wmm; /* WMM Information or Parameter Element */
+ const u8 *wmm_tspec;
+ const u8 *wps_ie;
+ const u8 *supp_channels;
+ const u8 *mdie;
+ const u8 *ftie;
+ const u8 *timeout_int;
+ const u8 *ht_capabilities;
+ const u8 *ht_operation;
+ const u8 *mesh_config;
+ const u8 *mesh_id;
+ const u8 *peer_mgmt;
+ const u8 *vht_capabilities;
+ const u8 *vht_operation;
+ const u8 *vht_opmode_notif;
+ const u8 *vendor_ht_cap;
+ const u8 *vendor_vht;
+ const u8 *p2p;
+ const u8 *wfd;
+ const u8 *link_id;
+ const u8 *interworking;
+ const u8 *qos_map_set;
+ const u8 *hs20;
+ const u8 *ext_capab;
+ const u8 *bss_max_idle_period;
+ const u8 *ssid_list;
+ const u8 *osen;
+ const u8 *mbo;
+ const u8 *ampe;
+ const u8 *mic;
+ const u8 *pref_freq_list;
+ const u8 *supp_op_classes;
+ const u8 *rrm_enabled;
+ const u8 *cag_number;
+ const u8 *ap_csn;
+ const u8 *fils_indic;
+ const u8 *dils;
+ const u8 *assoc_delay_info;
+ const u8 *fils_req_params;
+ const u8 *fils_key_confirm;
+ const u8 *fils_session;
+ const u8 *fils_hlp;
+ const u8 *fils_ip_addr_assign;
+ const u8 *key_delivery;
+ const u8 *wrapped_data;
+ const u8 *fils_pk;
+ const u8 *fils_nonce;
+ const u8 *owe_dh;
+ const u8 *power_capab;
+ const u8 *roaming_cons_sel;
+ const u8 *password_id;
+ const u8 *oci;
+ const u8 *multi_ap;
+ const u8 *he_capabilities;
+ const u8 *he_operation;
+ const u8 *short_ssid_list;
+ const u8 *he_6ghz_band_cap;
+ const u8 *sae_pk;
+ const u8 *s1g_capab;
+ const u8 *pasn_params;
+
+ u8 ssid_len;
+ u8 supp_rates_len;
+ u8 challenge_len;
+ u8 ext_supp_rates_len;
+ u8 wpa_ie_len;
+ u8 rsn_ie_len;
+ u8 rsnxe_len;
+ u8 wmm_len; /* 7 = WMM Information; 24 = WMM Parameter */
+ u8 wmm_tspec_len;
+ u8 wps_ie_len;
+ u8 supp_channels_len;
+ u8 mdie_len;
+ u8 ftie_len;
+ u8 mesh_config_len;
+ u8 mesh_id_len;
+ u8 peer_mgmt_len;
+ u8 vendor_ht_cap_len;
+ u8 vendor_vht_len;
+ u8 p2p_len;
+ u8 wfd_len;
+ u8 interworking_len;
+ u8 qos_map_set_len;
+ u8 hs20_len;
+ u8 ext_capab_len;
+ u8 ssid_list_len;
+ u8 osen_len;
+ u8 mbo_len;
+ u8 ampe_len;
+ u8 mic_len;
+ u8 pref_freq_list_len;
+ u8 supp_op_classes_len;
+ u8 rrm_enabled_len;
+ u8 cag_number_len;
+ u8 fils_indic_len;
+ u8 dils_len;
+ u8 fils_req_params_len;
+ u8 fils_key_confirm_len;
+ u8 fils_hlp_len;
+ u8 fils_ip_addr_assign_len;
+ u8 key_delivery_len;
+ u8 wrapped_data_len;
+ u8 fils_pk_len;
+ u8 owe_dh_len;
+ u8 power_capab_len;
+ u8 roaming_cons_sel_len;
+ u8 password_id_len;
+ u8 oci_len;
+ u8 multi_ap_len;
+ u8 he_capabilities_len;
+ u8 he_operation_len;
+ u8 short_ssid_list_len;
+ u8 sae_pk_len;
+ u8 pasn_params_len;
+
+ struct mb_ies_info mb_ies;
+ struct frag_ies_info frag_ies;
+};
+
+typedef enum { ParseOK = 0, ParseUnknown = 1, ParseFailed = -1 } ParseRes;
+
+ParseRes ieee802_11_parse_elems(const u8 *start, size_t len,
+ struct ieee802_11_elems *elems,
+ int show_errors);
+int ieee802_11_ie_count(const u8 *ies, size_t ies_len);
+struct wpabuf * ieee802_11_vendor_ie_concat(const u8 *ies, size_t ies_len,
+ u32 oui_type);
+struct ieee80211_hdr;
+const u8 * get_hdr_bssid(const struct ieee80211_hdr *hdr, size_t len);
+
+struct hostapd_wmm_ac_params {
+ int cwmin;
+ int cwmax;
+ int aifs;
+ int txop_limit; /* in units of 32us */
+ int admission_control_mandatory;
+};
+
+int hostapd_config_wmm_ac(struct hostapd_wmm_ac_params wmm_ac_params[],
+ const char *name, const char *val);
+
+struct hostapd_tx_queue_params {
+ int aifs;
+ int cwmin;
+ int cwmax;
+ int burst; /* maximum burst time in 0.1 ms, i.e., 10 = 1 ms */
+};
+
+#define NUM_TX_QUEUES 4
+
+int hostapd_config_tx_queue(struct hostapd_tx_queue_params queue[],
+ const char *name, const char *val);
+enum hostapd_hw_mode ieee80211_freq_to_chan(int freq, u8 *channel);
+int ieee80211_chan_to_freq(const char *country, u8 op_class, u8 chan);
+enum hostapd_hw_mode ieee80211_freq_to_channel_ext(unsigned int freq,
+ int sec_channel, int vht,
+ u8 *op_class, u8 *channel);
+int ieee80211_chaninfo_to_channel(unsigned int freq, enum chan_width chanwidth,
+ int sec_channel, u8 *op_class, u8 *channel);
+int ieee80211_is_dfs(int freq, const struct hostapd_hw_modes *modes,
+ u16 num_modes);
+int is_dfs_global_op_class(u8 op_class);
+enum phy_type ieee80211_get_phy_type(int freq, int ht, int vht);
+
+int supp_rates_11b_only(struct ieee802_11_elems *elems);
+int mb_ies_info_by_ies(struct mb_ies_info *info, const u8 *ies_buf,
+ size_t ies_len);
+struct wpabuf * mb_ies_by_info(struct mb_ies_info *info);
+
+const char * fc2str(u16 fc);
+const char * reason2str(u16 reason);
+const char * status2str(u16 status);
+
+struct oper_class_map {
+ enum hostapd_hw_mode mode;
+ u8 op_class;
+ u8 min_chan;
+ u8 max_chan;
+ u8 inc;
+ enum { BW20, BW40PLUS, BW40MINUS, BW40, BW80, BW2160, BW160, BW80P80,
+ BW4320, BW6480, BW8640} bw;
+ enum { P2P_SUPP, NO_P2P_SUPP } p2p;
+};
+
+extern const struct oper_class_map global_op_class[];
+extern size_t global_op_class_size;
+
+const u8 * get_ie(const u8 *ies, size_t len, u8 eid);
+const u8 * get_ie_ext(const u8 *ies, size_t len, u8 ext);
+const u8 * get_vendor_ie(const u8 *ies, size_t len, u32 vendor_type);
+
+size_t mbo_add_ie(u8 *buf, size_t len, const u8 *attr, size_t attr_len);
+
+size_t add_multi_ap_ie(u8 *buf, size_t len, u8 value);
+
+struct country_op_class {
+ u8 country_op_class;
+ u8 global_op_class;
+};
+
+u8 country_to_global_op_class(const char *country, u8 op_class);
+
+const struct oper_class_map * get_oper_class(const char *country, u8 op_class);
+int oper_class_bw_to_int(const struct oper_class_map *map);
+int center_idx_to_bw_6ghz(u8 idx);
+bool is_6ghz_freq(int freq);
+bool is_6ghz_op_class(u8 op_class);
+bool is_6ghz_psc_frequency(int freq);
+int get_6ghz_sec_channel(int channel);
+
+int ieee802_11_parse_candidate_list(const char *pos, u8 *nei_rep,
+ size_t nei_rep_len);
+
+int ieee802_11_ext_capab(const u8 *ie, unsigned int capab);
+bool ieee802_11_rsnx_capab_len(const u8 *rsnxe, size_t rsnxe_len,
+ unsigned int capab);
+bool ieee802_11_rsnx_capab(const u8 *rsnxe, unsigned int capab);
+int op_class_to_bandwidth(u8 op_class);
+int op_class_to_ch_width(u8 op_class);
+
+/* element iteration helpers */
+#define for_each_element(_elem, _data, _datalen) \
+ for (_elem = (const struct element *) (_data); \
+ (const u8 *) (_data) + (_datalen) - (const u8 *) _elem >= \
+ (int) sizeof(*_elem) && \
+ (const u8 *) (_data) + (_datalen) - (const u8 *) _elem >= \
+ (int) sizeof(*_elem) + _elem->datalen; \
+ _elem = (const struct element *) (_elem->data + _elem->datalen))
+
+#define for_each_element_id(element, _id, data, datalen) \
+ for_each_element(element, data, datalen) \
+ if (element->id == (_id))
+
+#define for_each_element_extid(element, extid, _data, _datalen) \
+ for_each_element(element, _data, _datalen) \
+ if (element->id == WLAN_EID_EXTENSION && \
+ element->datalen > 0 && \
+ element->data[0] == (extid))
+
+#define for_each_subelement(sub, element) \
+ for_each_element(sub, (element)->data, (element)->datalen)
+
+#define for_each_subelement_id(sub, id, element) \
+ for_each_element_id(sub, id, (element)->data, (element)->datalen)
+
+#define for_each_subelement_extid(sub, extid, element) \
+ for_each_element_extid(sub, extid, (element)->data, (element)->datalen)
+
+/**
+ * for_each_element_completed - Determine if element parsing consumed all data
+ * @element: Element pointer after for_each_element() or friends
+ * @data: Same data pointer as passed to for_each_element() or friends
+ * @datalen: Same data length as passed to for_each_element() or friends
+ *
+ * This function returns 1 if all the data was parsed or considered
+ * while walking the elements. Only use this if your for_each_element()
+ * loop cannot be broken out of, otherwise it always returns 0.
+ *
+ * If some data was malformed, this returns %false since the last parsed
+ * element will not fill the whole remaining data.
+ */
+static inline int for_each_element_completed(const struct element *element,
+ const void *data, size_t datalen)
+{
+ return (const u8 *) element == (const u8 *) data + datalen;
+}
+
+struct ieee80211_edmg_config;
+
+void hostapd_encode_edmg_chan(int edmg_enable, u8 edmg_channel,
+ int primary_channel,
+ struct ieee80211_edmg_config *edmg);
+
+int ieee802_edmg_is_allowed(struct ieee80211_edmg_config allowed,
+ struct ieee80211_edmg_config requested);
+
+struct wpabuf * ieee802_11_defrag_data(struct ieee802_11_elems *elems,
+ u8 eid, u8 eid_ext,
+ const u8 *data, u8 len);
+struct wpabuf * ieee802_11_defrag(struct ieee802_11_elems *elems,
+ u8 eid, u8 eid_ext);
+
+#endif /* IEEE802_11_COMMON_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/ieee802_11_defs.h b/ap/app/wpa_supplicant-2.10/src/common/ieee802_11_defs.h
new file mode 100755
index 0000000..928b535
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/ieee802_11_defs.h
@@ -0,0 +1,2504 @@
+/*
+ * IEEE 802.11 Frame type definitions
+ * Copyright (c) 2002-2019, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2007-2008 Intel Corporation
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef IEEE802_11_DEFS_H
+#define IEEE802_11_DEFS_H
+
+#include <utils/common.h>
+
+/* IEEE 802.11 defines */
+
+#define WLAN_FC_PVER 0x0003
+#define WLAN_FC_TODS 0x0100
+#define WLAN_FC_FROMDS 0x0200
+#define WLAN_FC_MOREFRAG 0x0400
+#define WLAN_FC_RETRY 0x0800
+#define WLAN_FC_PWRMGT 0x1000
+#define WLAN_FC_MOREDATA 0x2000
+#define WLAN_FC_ISWEP 0x4000
+#define WLAN_FC_HTC 0x8000
+
+#define WLAN_FC_GET_TYPE(fc) (((fc) & 0x000c) >> 2)
+#define WLAN_FC_GET_STYPE(fc) (((fc) & 0x00f0) >> 4)
+
+#define WLAN_INVALID_MGMT_SEQ 0xFFFF
+
+#define WLAN_GET_SEQ_FRAG(seq) ((seq) & (BIT(3) | BIT(2) | BIT(1) | BIT(0)))
+#define WLAN_GET_SEQ_SEQ(seq) \
+ (((seq) & (~(BIT(3) | BIT(2) | BIT(1) | BIT(0)))) >> 4)
+
+#define WLAN_FC_TYPE_MGMT 0
+#define WLAN_FC_TYPE_CTRL 1
+#define WLAN_FC_TYPE_DATA 2
+
+/* management */
+#define WLAN_FC_STYPE_ASSOC_REQ 0
+#define WLAN_FC_STYPE_ASSOC_RESP 1
+#define WLAN_FC_STYPE_REASSOC_REQ 2
+#define WLAN_FC_STYPE_REASSOC_RESP 3
+#define WLAN_FC_STYPE_PROBE_REQ 4
+#define WLAN_FC_STYPE_PROBE_RESP 5
+#define WLAN_FC_STYPE_BEACON 8
+#define WLAN_FC_STYPE_ATIM 9
+#define WLAN_FC_STYPE_DISASSOC 10
+#define WLAN_FC_STYPE_AUTH 11
+#define WLAN_FC_STYPE_DEAUTH 12
+#define WLAN_FC_STYPE_ACTION 13
+#define WLAN_FC_STYPE_ACTION_NO_ACK 14
+
+/* control */
+#define WLAN_FC_STYPE_PSPOLL 10
+#define WLAN_FC_STYPE_RTS 11
+#define WLAN_FC_STYPE_CTS 12
+#define WLAN_FC_STYPE_ACK 13
+#define WLAN_FC_STYPE_CFEND 14
+#define WLAN_FC_STYPE_CFENDACK 15
+
+/* data */
+#define WLAN_FC_STYPE_DATA 0
+#define WLAN_FC_STYPE_DATA_CFACK 1
+#define WLAN_FC_STYPE_DATA_CFPOLL 2
+#define WLAN_FC_STYPE_DATA_CFACKPOLL 3
+#define WLAN_FC_STYPE_NULLFUNC 4
+#define WLAN_FC_STYPE_CFACK 5
+#define WLAN_FC_STYPE_CFPOLL 6
+#define WLAN_FC_STYPE_CFACKPOLL 7
+#define WLAN_FC_STYPE_QOS_DATA 8
+#define WLAN_FC_STYPE_QOS_DATA_CFACK 9
+#define WLAN_FC_STYPE_QOS_DATA_CFPOLL 10
+#define WLAN_FC_STYPE_QOS_DATA_CFACKPOLL 11
+#define WLAN_FC_STYPE_QOS_NULL 12
+#define WLAN_FC_STYPE_QOS_CFPOLL 14
+#define WLAN_FC_STYPE_QOS_CFACKPOLL 15
+
+/* Authentication algorithms */
+#define WLAN_AUTH_OPEN 0
+#define WLAN_AUTH_SHARED_KEY 1
+#define WLAN_AUTH_FT 2
+#define WLAN_AUTH_SAE 3
+#define WLAN_AUTH_FILS_SK 4
+#define WLAN_AUTH_FILS_SK_PFS 5
+#define WLAN_AUTH_FILS_PK 6
+#define WLAN_AUTH_PASN 7
+#define WLAN_AUTH_LEAP 128
+
+#define WLAN_AUTH_CHALLENGE_LEN 128
+
+#define WLAN_CAPABILITY_ESS BIT(0)
+#define WLAN_CAPABILITY_IBSS BIT(1)
+#define WLAN_CAPABILITY_CF_POLLABLE BIT(2)
+#define WLAN_CAPABILITY_CF_POLL_REQUEST BIT(3)
+#define WLAN_CAPABILITY_PRIVACY BIT(4)
+#define WLAN_CAPABILITY_SHORT_PREAMBLE BIT(5)
+#define WLAN_CAPABILITY_PBCC BIT(6)
+#define WLAN_CAPABILITY_CHANNEL_AGILITY BIT(7)
+#define WLAN_CAPABILITY_SPECTRUM_MGMT BIT(8)
+#define WLAN_CAPABILITY_QOS BIT(9)
+#define WLAN_CAPABILITY_SHORT_SLOT_TIME BIT(10)
+#define WLAN_CAPABILITY_APSD BIT(11)
+#define WLAN_CAPABILITY_RADIO_MEASUREMENT BIT(12)
+#define WLAN_CAPABILITY_DSSS_OFDM BIT(13)
+#define WLAN_CAPABILITY_DELAYED_BLOCK_ACK BIT(14)
+#define WLAN_CAPABILITY_IMM_BLOCK_ACK BIT(15)
+
+/* Status codes (IEEE Std 802.11-2016, 9.4.1.9, Table 9-46) */
+#define WLAN_STATUS_SUCCESS 0
+#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
+#define WLAN_STATUS_TDLS_WAKEUP_ALTERNATE 2
+#define WLAN_STATUS_TDLS_WAKEUP_REJECT 3
+#define WLAN_STATUS_SECURITY_DISABLED 5
+#define WLAN_STATUS_UNACCEPTABLE_LIFETIME 6
+#define WLAN_STATUS_NOT_IN_SAME_BSS 7
+#define WLAN_STATUS_CAPS_UNSUPPORTED 10
+#define WLAN_STATUS_REASSOC_NO_ASSOC 11
+#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
+#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
+#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
+#define WLAN_STATUS_CHALLENGE_FAIL 15
+#define WLAN_STATUS_AUTH_TIMEOUT 16
+#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
+#define WLAN_STATUS_ASSOC_DENIED_RATES 18
+#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
+#define WLAN_STATUS_SPEC_MGMT_REQUIRED 22
+#define WLAN_STATUS_PWR_CAPABILITY_NOT_VALID 23
+#define WLAN_STATUS_SUPPORTED_CHANNEL_NOT_VALID 24
+#define WLAN_STATUS_ASSOC_DENIED_NO_SHORT_SLOT_TIME 25
+#define WLAN_STATUS_ASSOC_DENIED_NO_HT 27
+#define WLAN_STATUS_R0KH_UNREACHABLE 28
+#define WLAN_STATUS_ASSOC_DENIED_NO_PCO 29
+#define WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY 30
+#define WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION 31
+#define WLAN_STATUS_UNSPECIFIED_QOS_FAILURE 32
+#define WLAN_STATUS_DENIED_INSUFFICIENT_BANDWIDTH 33
+#define WLAN_STATUS_DENIED_POOR_CHANNEL_CONDITIONS 34
+#define WLAN_STATUS_DENIED_QOS_NOT_SUPPORTED 35
+#define WLAN_STATUS_REQUEST_DECLINED 37
+#define WLAN_STATUS_INVALID_PARAMETERS 38
+#define WLAN_STATUS_REJECTED_WITH_SUGGESTED_CHANGES 39
+#define WLAN_STATUS_INVALID_IE 40
+#define WLAN_STATUS_GROUP_CIPHER_NOT_VALID 41
+#define WLAN_STATUS_PAIRWISE_CIPHER_NOT_VALID 42
+#define WLAN_STATUS_AKMP_NOT_VALID 43
+#define WLAN_STATUS_UNSUPPORTED_RSN_IE_VERSION 44
+#define WLAN_STATUS_INVALID_RSN_IE_CAPAB 45
+#define WLAN_STATUS_CIPHER_REJECTED_PER_POLICY 46
+#define WLAN_STATUS_TS_NOT_CREATED 47
+#define WLAN_STATUS_DIRECT_LINK_NOT_ALLOWED 48
+#define WLAN_STATUS_DEST_STA_NOT_PRESENT 49
+#define WLAN_STATUS_DEST_STA_NOT_QOS_STA 50
+#define WLAN_STATUS_ASSOC_DENIED_LISTEN_INT_TOO_LARGE 51
+#define WLAN_STATUS_INVALID_FT_ACTION_FRAME_COUNT 52
+#define WLAN_STATUS_INVALID_PMKID 53
+#define WLAN_STATUS_INVALID_MDIE 54
+#define WLAN_STATUS_INVALID_FTIE 55
+#define WLAN_STATUS_REQUESTED_TCLAS_NOT_SUPPORTED 56
+#define WLAN_STATUS_INSUFFICIENT_TCLAS_PROCESSING_RESOURCES 57
+#define WLAN_STATUS_TRY_ANOTHER_BSS 58
+#define WLAN_STATUS_GAS_ADV_PROTO_NOT_SUPPORTED 59
+#define WLAN_STATUS_NO_OUTSTANDING_GAS_REQ 60
+#define WLAN_STATUS_GAS_RESP_NOT_RECEIVED 61
+#define WLAN_STATUS_STA_TIMED_OUT_WAITING_FOR_GAS_RESP 62
+#define WLAN_STATUS_GAS_RESP_LARGER_THAN_LIMIT 63
+#define WLAN_STATUS_REQ_REFUSED_HOME 64
+#define WLAN_STATUS_ADV_SRV_UNREACHABLE 65
+#define WLAN_STATUS_REQ_REFUSED_SSPN 67
+#define WLAN_STATUS_REQ_REFUSED_UNAUTH_ACCESS 68
+#define WLAN_STATUS_INVALID_RSNIE 72
+#define WLAN_STATUS_U_APSD_COEX_NOT_SUPPORTED 73
+#define WLAN_STATUS_U_APSD_COEX_MODE_NOT_SUPPORTED 74
+#define WLAN_STATUS_BAD_INTERVAL_WITH_U_APSD_COEX 75
+#define WLAN_STATUS_ANTI_CLOGGING_TOKEN_REQ 76
+#define WLAN_STATUS_FINITE_CYCLIC_GROUP_NOT_SUPPORTED 77
+#define WLAN_STATUS_CANNOT_FIND_ALT_TBTT 78
+#define WLAN_STATUS_TRANSMISSION_FAILURE 79
+#define WLAN_STATUS_REQ_TCLAS_NOT_SUPPORTED 80
+#define WLAN_STATUS_TCLAS_RESOURCES_EXCHAUSTED 81
+#define WLAN_STATUS_REJECTED_WITH_SUGGESTED_BSS_TRANSITION 82
+#define WLAN_STATUS_REJECT_WITH_SCHEDULE 83
+#define WLAN_STATUS_REJECT_NO_WAKEUP_SPECIFIED 84
+#define WLAN_STATUS_SUCCESS_POWER_SAVE_MODE 85
+#define WLAN_STATUS_PENDING_ADMITTING_FST_SESSION 86
+#define WLAN_STATUS_PERFORMING_FST_NOW 87
+#define WLAN_STATUS_PENDING_GAP_IN_BA_WINDOW 88
+#define WLAN_STATUS_REJECT_U_PID_SETTING 89
+#define WLAN_STATUS_REFUSED_EXTERNAL_REASON 92
+#define WLAN_STATUS_REFUSED_AP_OUT_OF_MEMORY 93
+#define WLAN_STATUS_REJECTED_EMERGENCY_SERVICE_NOT_SUPPORTED 94
+#define WLAN_STATUS_QUERY_RESP_OUTSTANDING 95
+#define WLAN_STATUS_REJECT_DSE_BAND 96
+#define WLAN_STATUS_TCLAS_PROCESSING_TERMINATED 97
+#define WLAN_STATUS_TS_SCHEDULE_CONFLICT 98
+#define WLAN_STATUS_DENIED_WITH_SUGGESTED_BAND_AND_CHANNEL 99
+#define WLAN_STATUS_MCCAOP_RESERVATION_CONFLICT 100
+#define WLAN_STATUS_MAF_LIMIT_EXCEEDED 101
+#define WLAN_STATUS_MCCA_TRACK_LIMIT_EXCEEDED 102
+#define WLAN_STATUS_DENIED_DUE_TO_SPECTRUM_MANAGEMENT 103
+#define WLAN_STATUS_ASSOC_DENIED_NO_VHT 104
+#define WLAN_STATUS_ENABLEMENT_DENIED 105
+#define WLAN_STATUS_RESTRICTION_FROM_AUTHORIZED_GDB 106
+#define WLAN_STATUS_AUTHORIZATION_DEENABLED 107
+#define WLAN_STATUS_FILS_AUTHENTICATION_FAILURE 112
+#define WLAN_STATUS_UNKNOWN_AUTHENTICATION_SERVER 113
+#define WLAN_STATUS_UNKNOWN_PASSWORD_IDENTIFIER 123
+#define WLAN_STATUS_DENIED_HE_NOT_SUPPORTED 124
+#define WLAN_STATUS_SAE_HASH_TO_ELEMENT 126
+#define WLAN_STATUS_SAE_PK 127
+
+/* Reason codes (IEEE Std 802.11-2016, 9.4.1.7, Table 9-45) */
+#define WLAN_REASON_UNSPECIFIED 1
+#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
+#define WLAN_REASON_DEAUTH_LEAVING 3
+#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
+#define WLAN_REASON_DISASSOC_AP_BUSY 5
+#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
+#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
+#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
+#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9
+#define WLAN_REASON_PWR_CAPABILITY_NOT_VALID 10
+#define WLAN_REASON_SUPPORTED_CHANNEL_NOT_VALID 11
+#define WLAN_REASON_BSS_TRANSITION_DISASSOC 12
+#define WLAN_REASON_INVALID_IE 13
+#define WLAN_REASON_MICHAEL_MIC_FAILURE 14
+#define WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT 15
+#define WLAN_REASON_GROUP_KEY_UPDATE_TIMEOUT 16
+#define WLAN_REASON_IE_IN_4WAY_DIFFERS 17
+#define WLAN_REASON_GROUP_CIPHER_NOT_VALID 18
+#define WLAN_REASON_PAIRWISE_CIPHER_NOT_VALID 19
+#define WLAN_REASON_AKMP_NOT_VALID 20
+#define WLAN_REASON_UNSUPPORTED_RSN_IE_VERSION 21
+#define WLAN_REASON_INVALID_RSN_IE_CAPAB 22
+#define WLAN_REASON_IEEE_802_1X_AUTH_FAILED 23
+#define WLAN_REASON_CIPHER_SUITE_REJECTED 24
+#define WLAN_REASON_TDLS_TEARDOWN_UNREACHABLE 25
+#define WLAN_REASON_TDLS_TEARDOWN_UNSPECIFIED 26
+#define WLAN_REASON_SSP_REQUESTED_DISASSOC 27
+#define WLAN_REASON_NO_SSP_ROAMING_AGREEMENT 28
+#define WLAN_REASON_BAD_CIPHER_OR_AKM 29
+#define WLAN_REASON_NOT_AUTHORIZED_THIS_LOCATION 30
+#define WLAN_REASON_SERVICE_CHANGE_PRECLUDES_TS 31
+#define WLAN_REASON_UNSPECIFIED_QOS_REASON 32
+#define WLAN_REASON_NOT_ENOUGH_BANDWIDTH 33
+#define WLAN_REASON_DISASSOC_LOW_ACK 34
+#define WLAN_REASON_EXCEEDED_TXOP 35
+#define WLAN_REASON_STA_LEAVING 36
+#define WLAN_REASON_END_TS_BA_DLS 37
+#define WLAN_REASON_UNKNOWN_TS_BA 38
+#define WLAN_REASON_TIMEOUT 39
+#define WLAN_REASON_PEERKEY_MISMATCH 45
+#define WLAN_REASON_AUTHORIZED_ACCESS_LIMIT_REACHED 46
+#define WLAN_REASON_EXTERNAL_SERVICE_REQUIREMENTS 47
+#define WLAN_REASON_INVALID_FT_ACTION_FRAME_COUNT 48
+#define WLAN_REASON_INVALID_PMKID 49
+#define WLAN_REASON_INVALID_MDE 50
+#define WLAN_REASON_INVALID_FTE 51
+#define WLAN_REASON_MESH_PEERING_CANCELLED 52
+#define WLAN_REASON_MESH_MAX_PEERS 53
+#define WLAN_REASON_MESH_CONFIG_POLICY_VIOLATION 54
+#define WLAN_REASON_MESH_CLOSE_RCVD 55
+#define WLAN_REASON_MESH_MAX_RETRIES 56
+#define WLAN_REASON_MESH_CONFIRM_TIMEOUT 57
+#define WLAN_REASON_MESH_INVALID_GTK 58
+#define WLAN_REASON_MESH_INCONSISTENT_PARAMS 59
+#define WLAN_REASON_MESH_INVALID_SECURITY_CAP 60
+#define WLAN_REASON_MESH_PATH_ERROR_NO_PROXY_INFO 61
+#define WLAN_REASON_MESH_PATH_ERROR_NO_FORWARDING_INFO 62
+#define WLAN_REASON_MESH_PATH_ERROR_DEST_UNREACHABLE 63
+#define WLAN_REASON_MAC_ADDRESS_ALREADY_EXISTS_IN_MBSS 64
+#define WLAN_REASON_MESH_CHANNEL_SWITCH_REGULATORY_REQ 65
+#define WLAN_REASON_MESH_CHANNEL_SWITCH_UNSPECIFIED 66
+
+
+/* Information Element IDs (IEEE Std 802.11-2016, 9.4.2.1, Table 9-77) */
+#define WLAN_EID_SSID 0
+#define WLAN_EID_SUPP_RATES 1
+#define WLAN_EID_DS_PARAMS 3
+#define WLAN_EID_CF_PARAMS 4
+#define WLAN_EID_TIM 5
+#define WLAN_EID_IBSS_PARAMS 6
+#define WLAN_EID_COUNTRY 7
+#define WLAN_EID_REQUEST 10
+#define WLAN_EID_BSS_LOAD 11
+#define WLAN_EID_EDCA_PARAM_SET 12
+#define WLAN_EID_TSPEC 13
+#define WLAN_EID_TCLAS 14
+#define WLAN_EID_SCHEDULE 15
+#define WLAN_EID_CHALLENGE 16
+#define WLAN_EID_PWR_CONSTRAINT 32
+#define WLAN_EID_PWR_CAPABILITY 33
+#define WLAN_EID_TPC_REQUEST 34
+#define WLAN_EID_TPC_REPORT 35
+#define WLAN_EID_SUPPORTED_CHANNELS 36
+#define WLAN_EID_CHANNEL_SWITCH 37
+#define WLAN_EID_MEASURE_REQUEST 38
+#define WLAN_EID_MEASURE_REPORT 39
+#define WLAN_EID_QUIET 40
+#define WLAN_EID_IBSS_DFS 41
+#define WLAN_EID_ERP_INFO 42
+#define WLAN_EID_TS_DELAY 43
+#define WLAN_EID_TCLAS_PROCESSING 44
+#define WLAN_EID_HT_CAP 45
+#define WLAN_EID_QOS 46
+#define WLAN_EID_RSN 48
+#define WLAN_EID_EXT_SUPP_RATES 50
+#define WLAN_EID_AP_CHANNEL_REPORT 51
+#define WLAN_EID_NEIGHBOR_REPORT 52
+#define WLAN_EID_RCPI 53
+#define WLAN_EID_MOBILITY_DOMAIN 54
+#define WLAN_EID_FAST_BSS_TRANSITION 55
+#define WLAN_EID_TIMEOUT_INTERVAL 56
+#define WLAN_EID_RIC_DATA 57
+#define WLAN_EID_DSE_REGISTERED_LOCATION 58
+#define WLAN_EID_SUPPORTED_OPERATING_CLASSES 59
+#define WLAN_EID_EXT_CHANSWITCH_ANN 60
+#define WLAN_EID_HT_OPERATION 61
+#define WLAN_EID_SECONDARY_CHANNEL_OFFSET 62
+#define WLAN_EID_BSS_AVERAGE_ACCESS_DELAY 63
+#define WLAN_EID_ANTENNA 64
+#define WLAN_EID_RSNI 65
+#define WLAN_EID_MEASUREMENT_PILOT_TRANSMISSION 66
+#define WLAN_EID_BSS_AVAILABLE_ADM_CAPA 67
+#define WLAN_EID_BSS_AC_ACCESS_DELAY 68 /* note: also used by WAPI */
+#define WLAN_EID_TIME_ADVERTISEMENT 69
+#define WLAN_EID_RRM_ENABLED_CAPABILITIES 70
+#define WLAN_EID_MULTIPLE_BSSID 71
+#define WLAN_EID_20_40_BSS_COEXISTENCE 72
+#define WLAN_EID_20_40_BSS_INTOLERANT 73
+#define WLAN_EID_OVERLAPPING_BSS_SCAN_PARAMS 74
+#define WLAN_EID_RIC_DESCRIPTOR 75
+#define WLAN_EID_MMIE 76
+#define WLAN_EID_EVENT_REQUEST 78
+#define WLAN_EID_EVENT_REPORT 79
+#define WLAN_EID_DIAGNOSTIC_REQUEST 80
+#define WLAN_EID_DIAGNOSTIC_REPORT 81
+#define WLAN_EID_LOCATION_PARAMETERS 82
+#define WLAN_EID_NONTRANSMITTED_BSSID_CAPA 83
+#define WLAN_EID_SSID_LIST 84
+#define WLAN_EID_MULTIPLE_BSSID_INDEX 85
+#define WLAN_EID_FMS_DESCRIPTOR 86
+#define WLAN_EID_FMS_REQUEST 87
+#define WLAN_EID_FMS_RESPONSE 88
+#define WLAN_EID_QOS_TRAFFIC_CAPABILITY 89
+#define WLAN_EID_BSS_MAX_IDLE_PERIOD 90
+#define WLAN_EID_TFS_REQ 91
+#define WLAN_EID_TFS_RESP 92
+#define WLAN_EID_WNMSLEEP 93
+#define WLAN_EID_TIM_BROADCAST_REQUEST 94
+#define WLAN_EID_TIM_BROADCAST_RESPONSE 95
+#define WLAN_EID_COLLOCATED_INTERFERENCE_REPORT 96
+#define WLAN_EID_CHANNEL_USAGE 97
+#define WLAN_EID_TIME_ZONE 98
+#define WLAN_EID_DMS_REQUEST 99
+#define WLAN_EID_DMS_RESPONSE 100
+#define WLAN_EID_LINK_ID 101
+#define WLAN_EID_WAKEUP_SCHEDULE 102
+#define WLAN_EID_CHANNEL_SWITCH_TIMING 104
+#define WLAN_EID_PTI_CONTROL 105
+#define WLAN_EID_TPU_BUFFER_STATUS 106
+#define WLAN_EID_INTERWORKING 107
+#define WLAN_EID_ADV_PROTO 108
+#define WLAN_EID_EXPEDITED_BANDWIDTH_REQ 109
+#define WLAN_EID_QOS_MAP_SET 110
+#define WLAN_EID_ROAMING_CONSORTIUM 111
+#define WLAN_EID_EMERGENCY_ALERT_ID 112
+#define WLAN_EID_MESH_CONFIG 113
+#define WLAN_EID_MESH_ID 114
+#define WLAN_EID_MESH_LINK_METRIC_REPORT 115
+#define WLAN_EID_CONGESTION_NOTIFICATION 116
+#define WLAN_EID_PEER_MGMT 117
+#define WLAN_EID_MESH_CHANNEL_SWITCH_PARAMETERS 118
+#define WLAN_EID_MESH_AWAKE_WINDOW 119
+#define WLAN_EID_BEACON_TIMING 120
+#define WLAN_EID_MCCAOP_SETUP_REQUEST 121
+#define WLAN_EID_MCCAOP_SETUP_REPLY 122
+#define WLAN_EID_MCCAOP_ADVERTISEMENT 123
+#define WLAN_EID_MCCAOP_TEARDOWN 124
+#define WLAN_EID_GANN 125
+#define WLAN_EID_RANN 126
+#define WLAN_EID_EXT_CAPAB 127
+#define WLAN_EID_PREQ 130
+#define WLAN_EID_PREP 131
+#define WLAN_EID_PERR 132
+#define WLAN_EID_PXU 137
+#define WLAN_EID_PXUC 138
+#define WLAN_EID_AMPE 139
+#define WLAN_EID_MIC 140
+#define WLAN_EID_DESTINATION_URI 141
+#define WLAN_EID_U_APSD_COEX 142
+#define WLAN_EID_DMG_WAKEUP_SCHEDULE 143
+#define WLAN_EID_EXTENDED_SCHEDULE 144
+#define WLAN_EID_STA_AVAILABILITY 145
+#define WLAN_EID_DMG_TSPEC 146
+#define WLAN_EID_NEXT_DMG_ATI 147
+#define WLAN_EID_DMG_CAPABILITIES 148
+#define WLAN_EID_DMG_OPERATION 151
+#define WLAN_EID_DMG_BSS_PARAMETER_CHANGE 152
+#define WLAN_EID_DMG_BEAM_REFINEMENT 153
+#define WLAN_EID_CHANNEL_MEASUREMENT_FEEDBACK 154
+#define WLAN_EID_CCKM 156
+#define WLAN_EID_AWAKE_WINDOW 157
+#define WLAN_EID_MULTI_BAND 158
+#define WLAN_EID_ADDBA_EXTENSION 159
+#define WLAN_EID_NEXTPCP_LIST 160
+#define WLAN_EID_PCP_HANDOVER 161
+#define WLAN_EID_DMG_LINK_MARGIN 162
+#define WLAN_EID_SWITCHING_STREAM 163
+#define WLAN_EID_SESSION_TRANSITION 164
+#define WLAN_EID_DYNAMIC_TONE_PAIRING_REPORT 165
+#define WLAN_EID_CLUSTER_REPORT 166
+#define WLAN_EID_REPLAY_CAPABILITIES 167
+#define WLAN_EID_RELAY_TRANSFER_PARAM_SET 168
+#define WLAN_EID_BEAMLINK_MAINTENANCE 169
+#define WLAN_EID_MULTIPLE_MAC_SUBLAYERS 170
+#define WLAN_EID_U_PID 171
+#define WLAN_EID_DMG_LINK_ADAPTATION_ACK 172
+#define WLAN_EID_MCCAOP_ADVERTISEMENT_OVERVIEW 174
+#define WLAN_EID_QUIET_PERIOD_REQUEST 175
+#define WLAN_EID_QUIET_PERIOD_RESPONSE 177
+#define WLAN_EID_QMF_POLICY 181
+#define WLAN_EID_ECAPC_POLICY 182
+#define WLAN_EID_CLUSTER_TIME_OFFSET 183
+#define WLAN_EID_INTRA_ACCESS_CATEGORY_PRIORITY 184
+#define WLAN_EID_SCS_DESCRIPTOR 185
+#define WLAN_EID_QLOAD_REPORT 186
+#define WLAN_EID_HCCA_TXOP_UPDATE_COUNT 187
+#define WLAN_EID_HIGHER_LAYER_STREAM_ID 188
+#define WLAN_EID_GCR_GROUP_ADDRESS 189
+#define WLAN_EID_ANTENNA_SECTOR_ID_PATTERN 190
+#define WLAN_EID_VHT_CAP 191
+#define WLAN_EID_VHT_OPERATION 192
+#define WLAN_EID_VHT_EXTENDED_BSS_LOAD 193
+#define WLAN_EID_VHT_WIDE_BW_CHSWITCH 194
+#define WLAN_EID_TRANSMIT_POWER_ENVELOPE 195
+#define WLAN_EID_VHT_CHANNEL_SWITCH_WRAPPER 196
+#define WLAN_EID_VHT_AID 197
+#define WLAN_EID_VHT_QUIET_CHANNEL 198
+#define WLAN_EID_VHT_OPERATING_MODE_NOTIFICATION 199
+#define WLAN_EID_UPSIM 200
+#define WLAN_EID_REDUCED_NEIGHBOR_REPORT 201
+#define WLAN_EID_TVHT_OPERATION 202
+#define WLAN_EID_DEVICE_LOCATION 204
+#define WLAN_EID_WHITE_SPACE_MAP 205
+#define WLAN_EID_FTM_PARAMETERS 206
+#define WLAN_EID_S1G_BCN_COMPAT 213
+#define WLAN_EID_TWT 216
+#define WLAN_EID_S1G_CAPABILITIES 217
+#define WLAN_EID_VENDOR_SPECIFIC 221
+#define WLAN_EID_S1G_OPERATION 232
+#define WLAN_EID_CAG_NUMBER 237
+#define WLAN_EID_AP_CSN 239
+#define WLAN_EID_FILS_INDICATION 240
+#define WLAN_EID_DILS 241
+#define WLAN_EID_FRAGMENT 242
+#define WLAN_EID_RSNX 244
+#define WLAN_EID_EXTENSION 255
+
+/* Element ID Extension (EID 255) values */
+#define WLAN_EID_EXT_ASSOC_DELAY_INFO 1
+#define WLAN_EID_EXT_FILS_REQ_PARAMS 2
+#define WLAN_EID_EXT_FILS_KEY_CONFIRM 3
+#define WLAN_EID_EXT_FILS_SESSION 4
+#define WLAN_EID_EXT_FILS_HLP_CONTAINER 5
+#define WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN 6
+#define WLAN_EID_EXT_KEY_DELIVERY 7
+#define WLAN_EID_EXT_WRAPPED_DATA 8
+#define WLAN_EID_EXT_FTM_SYNC_INFO 9
+#define WLAN_EID_EXT_EXTENDED_REQUEST 10
+#define WLAN_EID_EXT_ESTIMATED_SERVICE_PARAMS 11
+#define WLAN_EID_EXT_FILS_PUBLIC_KEY 12
+#define WLAN_EID_EXT_FILS_NONCE 13
+#define WLAN_EID_EXT_FUTURE_CHANNEL_GUIDANCE 14
+#define WLAN_EID_EXT_OWE_DH_PARAM 32
+#define WLAN_EID_EXT_PASSWORD_IDENTIFIER 33
+#define WLAN_EID_EXT_HE_CAPABILITIES 35
+#define WLAN_EID_EXT_HE_OPERATION 36
+#define WLAN_EID_EXT_HE_MU_EDCA_PARAMS 38
+#define WLAN_EID_EXT_SPATIAL_REUSE 39
+#define WLAN_EID_EXT_OCV_OCI 54
+#define WLAN_EID_EXT_SHORT_SSID_LIST 58
+#define WLAN_EID_EXT_HE_6GHZ_BAND_CAP 59
+#define WLAN_EID_EXT_EDMG_CAPABILITIES 61
+#define WLAN_EID_EXT_EDMG_OPERATION 62
+#define WLAN_EID_EXT_MSCS_DESCRIPTOR 88
+#define WLAN_EID_EXT_TCLAS_MASK 89
+#define WLAN_EID_EXT_REJECTED_GROUPS 92
+#define WLAN_EID_EXT_ANTI_CLOGGING_TOKEN 93
+#define WLAN_EID_EXT_PASN_PARAMS 100
+
+/* Extended Capabilities field */
+#define WLAN_EXT_CAPAB_20_40_COEX 0
+#define WLAN_EXT_CAPAB_GLK 1
+#define WLAN_EXT_CAPAB_EXT_CHAN_SWITCH 2
+#define WLAN_EXT_CAPAB_GLK_GCR 3
+#define WLAN_EXT_CAPAB_PSMP 4
+/* 5 - Reserved */
+#define WLAN_EXT_CAPAB_S_PSMP 6
+#define WLAN_EXT_CAPAB_EVENT 7
+#define WLAN_EXT_CAPAB_DIAGNOSTICS 8
+#define WLAN_EXT_CAPAB_MULTICAST_DIAGNOSTICS 9
+#define WLAN_EXT_CAPAB_LOCATION_TRACKING 10
+#define WLAN_EXT_CAPAB_FMS 11
+#define WLAN_EXT_CAPAB_PROXY_ARP 12
+#define WLAN_EXT_CAPAB_COLL_INTERF_REP 13
+#define WLAN_EXT_CAPAB_CIVIC_LOCATION 14
+#define WLAN_EXT_CAPAB_GEOSPATIAL_LOCATION 15
+#define WLAN_EXT_CAPAB_TFS 16
+#define WLAN_EXT_CAPAB_WNM_SLEEP_MODE 17
+#define WLAN_EXT_CAPAB_TIM_BROADCAST 18
+#define WLAN_EXT_CAPAB_BSS_TRANSITION 19
+#define WLAN_EXT_CAPAB_QOS_TRAFFIC 20
+#define WLAN_EXT_CAPAB_AC_STA_COUNT 21
+#define WLAN_EXT_CAPAB_MULTIPLE_BSSID 22
+#define WLAN_EXT_CAPAB_TIMING_MEASUREMENT 23
+#define WLAN_EXT_CAPAB_CHANNEL_USAGE 24
+#define WLAN_EXT_CAPAB_SSID_LIST 25
+#define WLAN_EXT_CAPAB_DMS 26
+#define WLAN_EXT_CAPAB_UTF_TSF_OFFSET 27
+#define WLAN_EXT_CAPAB_TPU_BUFFER_STA 28
+#define WLAN_EXT_CAPAB_TDLS_PEER_PSM 29
+#define WLAN_EXT_CAPAB_TDLS_CHANNEL_SWITCH 30
+#define WLAN_EXT_CAPAB_INTERWORKING 31
+#define WLAN_EXT_CAPAB_QOS_MAP 32
+#define WLAN_EXT_CAPAB_EBR 33
+#define WLAN_EXT_CAPAB_SSPN_INTERFACE 34
+/* 35 - Reserved */
+#define WLAN_EXT_CAPAB_MSGCF 36
+#define WLAN_EXT_CAPAB_TDLS 37
+#define WLAN_EXT_CAPAB_TDLS_PROHIBITED 38
+#define WLAN_EXT_CAPAB_TDLS_CHANNEL_SWITCH_PROHIBITED 39
+#define WLAN_EXT_CAPAB_REJECT_UNADMITTED_FRAME 40
+/* 41-43 - Service Interval Granularity */
+#define WLAN_EXT_CAPAB_IDENTIFIER_LOCATION 44
+#define WLAN_EXT_CAPAB_U_APSD_COEX 45
+#define WLAN_EXT_CAPAB_WNM_NOTIFCATION 46
+#define WLAN_EXT_CAPAB_QAB 47
+#define WLAN_EXT_CAPAB_UTF_8_SSID 48
+#define WLAN_EXT_CAPAB_QMF 49
+#define WLAN_EXT_CAPAB_QMF_RECONFIG 50
+#define WLAN_EXT_CAPAB_ROBUST_AV_STREAMING 51
+#define WLAN_EXT_CAPAB_ADVANCED_GCR 52
+#define WLAN_EXT_CAPAB_MESH_GCR 53
+#define WLAN_EXT_CAPAB_SCS 54
+#define WLAN_EXT_CAPAB_QLOAD_REPORT 55
+#define WLAN_EXT_CAPAB_ALT_EDCA 56
+#define WLAN_EXT_CAPAB_UNPROT_TXOP_NEG 57
+#define WLAN_EXT_CAPAB_PROT_TXOP_NEG 58
+/* 59 - Reserved */
+#define WLAN_EXT_CAPAB_PROT_QLOAD_REPORT 60
+#define WLAN_EXT_CAPAB_TDLS_WIDER_BW 61
+#define WLAN_EXT_CAPAB_OPMODE_NOTIF 62
+/* 63-64 - Max Number of MSDUs In A-MSDU */
+#define WLAN_EXT_CAPAB_CHANNEL_SCHEDULE_MGMT 65
+#define WLAN_EXT_CAPAB_GEODB_INBAND_ENABLING_SIGNAL 66
+#define WLAN_EXT_CAPAB_NETWORK_CHANNEL_CTRL 67
+#define WLAN_EXT_CAPAB_WHITE_SPACE_MAP 68
+#define WLAN_EXT_CAPAB_CHANNEL_AVAIL_QUERY 69
+#define WLAN_EXT_CAPAB_FTM_RESPONDER 70
+#define WLAN_EXT_CAPAB_FTM_INITIATOR 71
+#define WLAN_EXT_CAPAB_FILS 72
+#define WLAN_EXT_CAPAB_EXT_SPECTRUM_MGMT 73
+#define WLAN_EXT_CAPAB_FUTURE_CHANNEL_GUIDANCE 74
+#define WLAN_EXT_CAPAB_PAD 75
+/* 76-79 - Reserved */
+#define WLAN_EXT_CAPAB_COMPLETE_NON_TX_BSSID_PROFILE 80
+#define WLAN_EXT_CAPAB_SAE_PW_ID 81
+#define WLAN_EXT_CAPAB_SAE_PW_ID_EXCLUSIVELY 82
+#define WLAN_EXT_CAPAB_BEACON_PROTECTION 84
+#define WLAN_EXT_CAPAB_MSCS 85
+#define WLAN_EXT_CAPAB_SAE_PK_EXCLUSIVELY 88
+
+/* Extended RSN Capabilities */
+/* bits 0-3: Field length (n-1) */
+#define WLAN_RSNX_CAPAB_PROTECTED_TWT 4
+#define WLAN_RSNX_CAPAB_SAE_H2E 5
+#define WLAN_RSNX_CAPAB_SAE_PK 6
+#define WLAN_RSNX_CAPAB_SECURE_LTF 8
+#define WLAN_RSNX_CAPAB_SECURE_RTT 9
+#define WLAN_RSNX_CAPAB_PROT_RANGE_NEG 10
+
+/* Action frame categories (IEEE Std 802.11-2016, 9.4.1.11, Table 9-76) */
+#define WLAN_ACTION_SPECTRUM_MGMT 0
+#define WLAN_ACTION_QOS 1
+#define WLAN_ACTION_DLS 2
+#define WLAN_ACTION_BLOCK_ACK 3
+#define WLAN_ACTION_PUBLIC 4
+#define WLAN_ACTION_RADIO_MEASUREMENT 5
+#define WLAN_ACTION_FT 6
+#define WLAN_ACTION_HT 7
+#define WLAN_ACTION_SA_QUERY 8
+#define WLAN_ACTION_PROTECTED_DUAL 9
+#define WLAN_ACTION_WNM 10
+#define WLAN_ACTION_UNPROTECTED_WNM 11
+#define WLAN_ACTION_TDLS 12
+#define WLAN_ACTION_MESH 13
+#define WLAN_ACTION_MULTIHOP 14
+#define WLAN_ACTION_SELF_PROTECTED 15
+#define WLAN_ACTION_DMG 16
+#define WLAN_ACTION_WMM 17 /* WMM Specification 1.1 */
+#define WLAN_ACTION_FST 18
+#define WLAN_ACTION_ROBUST_AV_STREAMING 19
+#define WLAN_ACTION_UNPROTECTED_DMG 20
+#define WLAN_ACTION_VHT 21
+#define WLAN_ACTION_S1G 22
+#define WLAN_ACTION_S1G_RELAY 23
+#define WLAN_ACTION_FLOW_CONTROL 24
+#define WLAN_ACTION_CTRL_RESP_MCS_NEG 25
+#define WLAN_ACTION_FILS 26
+#define WLAN_ACTION_PROTECTED_FTM 34
+#define WLAN_ACTION_VENDOR_SPECIFIC_PROTECTED 126
+#define WLAN_ACTION_VENDOR_SPECIFIC 127
+/* Note: 128-255 used to report errors by setting category | 0x80 */
+
+/* Public action codes (IEEE Std 802.11-2016, 9.6.8.1, Table 9-307) */
+#define WLAN_PA_20_40_BSS_COEX 0
+#define WLAN_PA_DSE_ENABLEMENT 1
+#define WLAN_PA_DSE_DEENABLEMENT 2
+#define WLAN_PA_DSE_REG_LOCATION_ANNOUNCE 3
+#define WLAN_PA_EXT_CHANNEL_SWITCH_ANNOUNCE 4
+#define WLAN_PA_DSE_MEASUREMENT_REQ 5
+#define WLAN_PA_DSE_MEASUREMENT_RESP 6
+#define WLAN_PA_MEASUREMENT_PILOT 7
+#define WLAN_PA_DSE_POWER_CONSTRAINT 8
+#define WLAN_PA_VENDOR_SPECIFIC 9
+#define WLAN_PA_GAS_INITIAL_REQ 10
+#define WLAN_PA_GAS_INITIAL_RESP 11
+#define WLAN_PA_GAS_COMEBACK_REQ 12
+#define WLAN_PA_GAS_COMEBACK_RESP 13
+#define WLAN_TDLS_DISCOVERY_RESPONSE 14
+#define WLAN_PA_LOCATION_TRACK_NOTIFICATION 15
+#define WLAN_PA_QAB_REQUEST_FRAME 16
+#define WLAN_PA_QAB_RESPONSE_FRAME 17
+#define WLAN_PA_QMF_POLICY 18
+#define WLAN_PA_QMF_POLICY_CHANGE 19
+#define WLAN_PA_QLOAD_REQUEST 20
+#define WLAN_PA_QLOAD_REPORT 21
+#define WLAN_PA_HCCA_TXOP_ADVERTISEMENT 22
+#define WLAN_PA_HCCA_TXOP_RESPONSE 23
+#define WLAN_PA_PUBLIC_KEY 24
+#define WLAN_PA_CHANNEL_AVAILABILITY_QUERY 25
+#define WLAN_PA_CHANNEL_SCHEDULE_MANAGEMENT 26
+#define WLAN_PA_CONTACT_VERIFICATION_SIGNAL 27
+#define WLAN_PA_GDD_ENABLEMENT_REQ 28
+#define WLAN_PA_GDD_ENABLEMENT_RESP 29
+#define WLAN_PA_NETWORK_CHANNEL_CONTROL 30
+#define WLAN_PA_WHITE_SPACE_MAP_ANNOUNCEMENT 31
+#define WLAN_PA_FTM_REQUEST 32
+#define WLAN_PA_FTM 33
+#define WLAN_PA_FILS_DISCOVERY 34
+#define WLAN_PA_LOCATION_MEASUREMENT_REPORT 47
+
+/* Protected Dual of Public Action frames (IEEE Std 802.11-2016, 9.6.11,
+ * Table 9-332) */
+#define WLAN_PROT_DSE_ENABLEMENT 1
+#define WLAN_PROT_DSE_DEENABLEMENT 2
+#define WLAN_PROT_EXT_CSA 4
+#define WLAN_PROT_MEASUREMENT_REQ 5
+#define WLAN_PROT_MEASUREMENT_REPORT 6
+#define WLAN_PROT_DSE_POWER_CONSTRAINT 8
+#define WLAN_PROT_VENDOR_SPECIFIC 9
+#define WLAN_PROT_GAS_INITIAL_REQ 10
+#define WLAN_PROT_GAS_INITIAL_RESP 11
+#define WLAN_PROT_GAS_COMEBACK_REQ 12
+#define WLAN_PROT_GAS_COMEBACK_RESP 13
+#define WLAN_PROT_QAB_REQUEST_FRAME 16
+#define WLAN_PROT_QAB_RESPONSE_FRAME 17
+#define WLAN_PROT_QMF_POLICY 18
+#define WLAN_PROT_QMF_POLICY_CHANGE 19
+#define WLAN_PROT_QLOAD_REQUEST 20
+#define WLAN_PROT_QLOAD_REPORT 21
+#define WLAN_PROT_HCCA_TXOP_ADVERTISEMENT 22
+#define WLAN_PROT_HCCA_TXOP_RESPONSE 23
+#define WLAN_PROT_CHANNEL_AVAILABILITY_QUERY 25
+#define WLAN_PROT_CHANNEL_SCHEDULE_MANAGEMENT 26
+#define WLAN_PROT_CONTACT_VERIFICATION_SIGNAL 27
+#define WLAN_PROT_GDD_ENABLEMENT_REQ 28
+#define WLAN_PROT_GDD_ENABLEMENT_RESP 29
+#define WLAN_PROT_NETWORK_CHANNEL_CONTROL 30
+#define WLAN_PROT_WHITE_SPACE_MAP_ANNOUNCEMENT 31
+
+/* SA Query Action frame (IEEE 802.11w/D8.0, 7.4.9) */
+#define WLAN_SA_QUERY_REQUEST 0
+#define WLAN_SA_QUERY_RESPONSE 1
+
+#define WLAN_SA_QUERY_TR_ID_LEN 2
+
+/* TDLS action codes */
+#define WLAN_TDLS_SETUP_REQUEST 0
+#define WLAN_TDLS_SETUP_RESPONSE 1
+#define WLAN_TDLS_SETUP_CONFIRM 2
+#define WLAN_TDLS_TEARDOWN 3
+#define WLAN_TDLS_PEER_TRAFFIC_INDICATION 4
+#define WLAN_TDLS_CHANNEL_SWITCH_REQUEST 5
+#define WLAN_TDLS_CHANNEL_SWITCH_RESPONSE 6
+#define WLAN_TDLS_PEER_PSM_REQUEST 7
+#define WLAN_TDLS_PEER_PSM_RESPONSE 8
+#define WLAN_TDLS_PEER_TRAFFIC_RESPONSE 9
+#define WLAN_TDLS_DISCOVERY_REQUEST 10
+
+/* Radio Measurement Action codes */
+#define WLAN_RRM_RADIO_MEASUREMENT_REQUEST 0
+#define WLAN_RRM_RADIO_MEASUREMENT_REPORT 1
+#define WLAN_RRM_LINK_MEASUREMENT_REQUEST 2
+#define WLAN_RRM_LINK_MEASUREMENT_REPORT 3
+#define WLAN_RRM_NEIGHBOR_REPORT_REQUEST 4
+#define WLAN_RRM_NEIGHBOR_REPORT_RESPONSE 5
+
+/* Protected Fine Timing Frame Action Field value */
+#define WLAN_PROT_FTM_REQUEST 1
+#define WLAN_PROT_FTM 2
+#define WLAN_PROT_FTM_REPORT 3
+
+/* Radio Measurement capabilities (from RM Enabled Capabilities element)
+ * IEEE Std 802.11-2016, 9.4.2.45, Table 9-157 */
+/* byte 1 (out of 5) */
+#define WLAN_RRM_CAPS_LINK_MEASUREMENT BIT(0)
+#define WLAN_RRM_CAPS_NEIGHBOR_REPORT BIT(1)
+#define WLAN_RRM_CAPS_BEACON_REPORT_PASSIVE BIT(4)
+#define WLAN_RRM_CAPS_BEACON_REPORT_ACTIVE BIT(5)
+#define WLAN_RRM_CAPS_BEACON_REPORT_TABLE BIT(6)
+/* byte 2 (out of 5) */
+#define WLAN_RRM_CAPS_LCI_MEASUREMENT BIT(4)
+/* byte 5 (out of 5) */
+#define WLAN_RRM_CAPS_FTM_RANGE_REPORT BIT(2)
+
+/*
+ * IEEE P802.11-REVmc/D5.0, 9.4.2.21.19 (Fine Timing Measurement Range
+ * request) - Minimum AP count
+ */
+#define WLAN_RRM_RANGE_REQ_MAX_MIN_AP 15
+
+/* Timeout Interval Type */
+#define WLAN_TIMEOUT_REASSOC_DEADLINE 1
+#define WLAN_TIMEOUT_KEY_LIFETIME 2
+#define WLAN_TIMEOUT_ASSOC_COMEBACK 3
+
+/* Interworking element (IEEE 802.11u) - Access Network Options */
+#define INTERWORKING_ANO_ACCESS_NETWORK_MASK 0x0f
+#define INTERWORKING_ANO_INTERNET 0x10
+#define INTERWORKING_ANO_ASRA 0x20
+#define INTERWORKING_ANO_ESR 0x40
+#define INTERWORKING_ANO_UESA 0x80
+
+#define INTERWORKING_ANT_PRIVATE 0
+#define INTERWORKING_ANT_PRIVATE_WITH_GUEST 1
+#define INTERWORKING_ANT_CHARGEABLE_PUBLIC 2
+#define INTERWORKING_ANT_FREE_PUBLIC 3
+#define INTERWORKING_ANT_PERSONAL_DEVICE 4
+#define INTERWORKING_ANT_EMERGENCY_SERVICES 5
+#define INTERWORKING_ANT_TEST 6
+#define INTERWORKING_ANT_WILDCARD 15
+
+/* Advertisement Protocol ID definitions (IEEE Std 802.11-2016, Table 9-215) */
+enum adv_proto_id {
+ ACCESS_NETWORK_QUERY_PROTOCOL = 0,
+ MIH_INFO_SERVICE = 1,
+ MIH_CMD_AND_EVENT_DISCOVERY = 2,
+ EMERGENCY_ALERT_SYSTEM = 3,
+ REGISTERED_LOCATION_QUERY_PROTO = 4,
+ ADV_PROTO_VENDOR_SPECIFIC = 221
+};
+
+/* Access Network Query Protocol info ID definitions (IEEE Std 802.11-2016,
+ * Table 9-271; P802.11ai) */
+enum anqp_info_id {
+ ANQP_QUERY_LIST = 256,
+ ANQP_CAPABILITY_LIST = 257,
+ ANQP_VENUE_NAME = 258,
+ ANQP_EMERGENCY_CALL_NUMBER = 259,
+ ANQP_NETWORK_AUTH_TYPE = 260,
+ ANQP_ROAMING_CONSORTIUM = 261,
+ ANQP_IP_ADDR_TYPE_AVAILABILITY = 262,
+ ANQP_NAI_REALM = 263,
+ ANQP_3GPP_CELLULAR_NETWORK = 264,
+ ANQP_AP_GEOSPATIAL_LOCATION = 265,
+ ANQP_AP_CIVIC_LOCATION = 266,
+ ANQP_AP_LOCATION_PUBLIC_URI = 267,
+ ANQP_DOMAIN_NAME = 268,
+ ANQP_EMERGENCY_ALERT_URI = 269,
+ ANQP_TDLS_CAPABILITY = 270,
+ ANQP_EMERGENCY_NAI = 271,
+ ANQP_NEIGHBOR_REPORT = 272,
+ ANQP_QUERY_AP_LIST = 273,
+ ANQP_AP_LIST_RESPONSE = 274,
+ ANQP_FILS_REALM_INFO = 275,
+ ANQP_CAG = 276,
+ ANQP_VENUE_URL = 277,
+ ANQP_ADVICE_OF_CHARGE = 278,
+ ANQP_LOCAL_CONTENT = 279,
+ ANQP_NETWORK_AUTH_TYPE_TIMESTAMP = 280,
+ ANQP_VENDOR_SPECIFIC = 56797
+};
+
+/* NAI Realm list - EAP Method subfield - Authentication Parameter ID */
+enum nai_realm_eap_auth_param {
+ NAI_REALM_EAP_AUTH_EXPANDED_EAP_METHOD = 1,
+ NAI_REALM_EAP_AUTH_NON_EAP_INNER_AUTH = 2,
+ NAI_REALM_EAP_AUTH_INNER_AUTH_EAP_METHOD = 3,
+ NAI_REALM_EAP_AUTH_EXPANDED_INNER_EAP_METHOD = 4,
+ NAI_REALM_EAP_AUTH_CRED_TYPE = 5,
+ NAI_REALM_EAP_AUTH_TUNNELED_CRED_TYPE = 6,
+ NAI_REALM_EAP_AUTH_VENDOR_SPECIFIC = 221
+};
+
+enum nai_realm_eap_auth_inner_non_eap {
+ NAI_REALM_INNER_NON_EAP_PAP = 1,
+ NAI_REALM_INNER_NON_EAP_CHAP = 2,
+ NAI_REALM_INNER_NON_EAP_MSCHAP = 3,
+ NAI_REALM_INNER_NON_EAP_MSCHAPV2 = 4
+};
+
+enum nai_realm_eap_cred_type {
+ NAI_REALM_CRED_TYPE_SIM = 1,
+ NAI_REALM_CRED_TYPE_USIM = 2,
+ NAI_REALM_CRED_TYPE_NFC_SECURE_ELEMENT = 3,
+ NAI_REALM_CRED_TYPE_HARDWARE_TOKEN = 4,
+ NAI_REALM_CRED_TYPE_SOFTOKEN = 5,
+ NAI_REALM_CRED_TYPE_CERTIFICATE = 6,
+ NAI_REALM_CRED_TYPE_USERNAME_PASSWORD = 7,
+ NAI_REALM_CRED_TYPE_NONE = 8,
+ NAI_REALM_CRED_TYPE_ANONYMOUS = 9,
+ NAI_REALM_CRED_TYPE_VENDOR_SPECIFIC = 10
+};
+
+/* Unprotected S1G Action field values for WLAN_ACTION_S1G */
+#define S1G_ACT_AID_SWITCH_REQUEST 0
+#define S1G_ACT_AID_SWITCH_RESPONSE 1
+#define S1G_ACT_SYNC_CONTROL 2
+#define S1G_ACT_STA_INFO_ANNOUNCE 3
+#define S1G_ACT_EDCA_PARAM_SET 4
+#define S1G_ACT_EL_OPERATION 5
+#define S1G_ACT_TWT_SETUP 6
+#define S1G_ACT_TWT_TEARDOWN 7
+#define S1G_ACT_SECT_GROUP_ID_LIST 8
+#define S1G_ACT_SECT_ID_FEEDBACK 9
+#define S1G_ACT_TWT_INFORMATION 11
+
+/*
+ * IEEE P802.11-REVmc/D5.0 Table 9-81 - Measurement type definitions for
+ * measurement requests
+ */
+enum measure_type {
+ MEASURE_TYPE_BASIC = 0,
+ MEASURE_TYPE_CCA = 1,
+ MEASURE_TYPE_RPI_HIST = 2,
+ MEASURE_TYPE_CHANNEL_LOAD = 3,
+ MEASURE_TYPE_NOISE_HIST = 4,
+ MEASURE_TYPE_BEACON = 5,
+ MEASURE_TYPE_FRAME = 6,
+ MEASURE_TYPE_STA_STATISTICS = 7,
+ MEASURE_TYPE_LCI = 8,
+ MEASURE_TYPE_TRANSMIT_STREAM = 9,
+ MEASURE_TYPE_MULTICAST_DIAG = 10,
+ MEASURE_TYPE_LOCATION_CIVIC = 11,
+ MEASURE_TYPE_LOCATION_ID = 12,
+ MEASURE_TYPE_DIRECTIONAL_CHAN_QUALITY = 13,
+ MEASURE_TYPE_DIRECTIONAL_MEASURE = 14,
+ MEASURE_TYPE_DIRECTIONAL_STATS = 15,
+ MEASURE_TYPE_FTM_RANGE = 16,
+ MEASURE_TYPE_MEASURE_PAUSE = 255,
+};
+
+/* IEEE Std 802.11-2012 Table 8-71 - Location subject definition */
+enum location_subject {
+ LOCATION_SUBJECT_LOCAL = 0,
+ LOCATION_SUBJECT_REMOTE = 1,
+ LOCATION_SUBJECT_3RD_PARTY = 2,
+};
+
+/*
+ * IEEE P802.11-REVmc/D5.0 Table 9-94 - Optional subelement IDs for LCI request
+ */
+enum lci_req_subelem {
+ LCI_REQ_SUBELEM_AZIMUTH_REQ = 1,
+ LCI_REQ_SUBELEM_ORIGINATOR_MAC_ADDR = 2,
+ LCI_REQ_SUBELEM_TARGET_MAC_ADDR = 3,
+ LCI_REQ_SUBELEM_MAX_AGE = 4,
+};
+
+#define FILS_NONCE_LEN 16
+#define FILS_SESSION_LEN 8
+#define FILS_CACHE_ID_LEN 2
+#define FILS_MAX_KEY_AUTH_LEN 48
+
+#ifdef _MSC_VER
+#pragma pack(push, 1)
+#endif /* _MSC_VER */
+
+struct ieee80211_hdr {
+ le16 frame_control;
+ le16 duration_id;
+ u8 addr1[6];
+ u8 addr2[6];
+ u8 addr3[6];
+ le16 seq_ctrl;
+ /* followed by 'u8 addr4[6];' if ToDS and FromDS is set in data frame
+ */
+} STRUCT_PACKED;
+
+#define IEEE80211_DA_FROMDS addr1
+#define IEEE80211_BSSID_FROMDS addr2
+#define IEEE80211_SA_FROMDS addr3
+
+#define IEEE80211_HDRLEN (sizeof(struct ieee80211_hdr))
+
+#define IEEE80211_FC(type, stype) host_to_le16((type << 2) | (stype << 4))
+
+struct ieee80211_mgmt {
+ le16 frame_control;
+ le16 duration;
+ u8 da[6];
+ u8 sa[6];
+ u8 bssid[6];
+ le16 seq_ctrl;
+ union {
+ struct {
+ le16 auth_alg;
+ le16 auth_transaction;
+ le16 status_code;
+ /* possibly followed by Challenge text */
+ u8 variable[];
+ } STRUCT_PACKED auth;
+ struct {
+ le16 reason_code;
+ u8 variable[];
+ } STRUCT_PACKED deauth;
+ struct {
+ le16 capab_info;
+ le16 listen_interval;
+ /* followed by SSID and Supported rates */
+ u8 variable[];
+ } STRUCT_PACKED assoc_req;
+ struct {
+ le16 capab_info;
+ le16 status_code;
+ le16 aid;
+ /* followed by Supported rates */
+ u8 variable[];
+ } STRUCT_PACKED assoc_resp, reassoc_resp;
+ struct {
+ le16 capab_info;
+ le16 listen_interval;
+ u8 current_ap[6];
+ /* followed by SSID and Supported rates */
+ u8 variable[];
+ } STRUCT_PACKED reassoc_req;
+ struct {
+ le16 reason_code;
+ u8 variable[];
+ } STRUCT_PACKED disassoc;
+ struct {
+ u8 timestamp[8];
+ le16 beacon_int;
+ le16 capab_info;
+ /* followed by some of SSID, Supported rates,
+ * FH Params, DS Params, CF Params, IBSS Params, TIM */
+ u8 variable[];
+ } STRUCT_PACKED beacon;
+ /* probe_req: only variable items: SSID, Supported rates */
+ struct {
+ u8 timestamp[8];
+ le16 beacon_int;
+ le16 capab_info;
+ /* followed by some of SSID, Supported rates,
+ * FH Params, DS Params, CF Params, IBSS Params */
+ u8 variable[];
+ } STRUCT_PACKED probe_resp;
+ struct {
+ u8 category;
+ union {
+ struct {
+ u8 action_code;
+ u8 dialog_token;
+ u8 status_code;
+ u8 variable[];
+ } STRUCT_PACKED wmm_action;
+ struct{
+ u8 action_code;
+ u8 element_id;
+ u8 length;
+ u8 switch_mode;
+ u8 new_chan;
+ u8 switch_count;
+ } STRUCT_PACKED chan_switch;
+ struct {
+ u8 action;
+ u8 sta_addr[ETH_ALEN];
+ u8 target_ap_addr[ETH_ALEN];
+ u8 variable[]; /* FT Request */
+ } STRUCT_PACKED ft_action_req;
+ struct {
+ u8 action;
+ u8 sta_addr[ETH_ALEN];
+ u8 target_ap_addr[ETH_ALEN];
+ le16 status_code;
+ u8 variable[]; /* FT Request */
+ } STRUCT_PACKED ft_action_resp;
+ struct {
+ u8 action;
+ u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN];
+ u8 variable[]; /* OCI element */
+ } STRUCT_PACKED sa_query_req;
+ struct {
+ u8 action; /* */
+ u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN];
+ u8 variable[]; /* OCI element */
+ } STRUCT_PACKED sa_query_resp;
+ struct {
+ u8 action;
+ u8 dialogtoken;
+ u8 variable[];
+ } STRUCT_PACKED wnm_sleep_req;
+ struct {
+ u8 action;
+ u8 dialogtoken;
+ le16 keydata_len;
+ u8 variable[];
+ } STRUCT_PACKED wnm_sleep_resp;
+ struct {
+ u8 action;
+ u8 variable[];
+ } STRUCT_PACKED public_action;
+ struct {
+ u8 action; /* 9 */
+ u8 oui[3];
+ /* Vendor-specific content */
+ u8 variable[];
+ } STRUCT_PACKED vs_public_action;
+ struct {
+ u8 action; /* 7 */
+ u8 dialog_token;
+ u8 req_mode;
+ le16 disassoc_timer;
+ u8 validity_interval;
+ /* BSS Termination Duration (optional),
+ * Session Information URL (optional),
+ * BSS Transition Candidate List
+ * Entries */
+ u8 variable[];
+ } STRUCT_PACKED bss_tm_req;
+ struct {
+ u8 action; /* 8 */
+ u8 dialog_token;
+ u8 status_code;
+ u8 bss_termination_delay;
+ /* Target BSSID (optional),
+ * BSS Transition Candidate List
+ * Entries (optional) */
+ u8 variable[];
+ } STRUCT_PACKED bss_tm_resp;
+ struct {
+ u8 action; /* 6 */
+ u8 dialog_token;
+ u8 query_reason;
+ /* BSS Transition Candidate List
+ * Entries (optional) */
+ u8 variable[];
+ } STRUCT_PACKED bss_tm_query;
+ struct {
+ u8 action; /* 11 */
+ u8 dialog_token;
+ u8 req_info;
+ } STRUCT_PACKED coloc_intf_req;
+ struct {
+ u8 action; /* 12 */
+ u8 dialog_token;
+ u8 variable[];
+ } STRUCT_PACKED coloc_intf_report;
+ struct {
+ u8 action; /* 15 */
+ u8 variable[];
+ } STRUCT_PACKED slf_prot_action;
+ struct {
+ u8 action;
+ u8 variable[];
+ } STRUCT_PACKED fst_action;
+ struct {
+ u8 action;
+ u8 dialog_token;
+ u8 variable[];
+ } STRUCT_PACKED rrm;
+ } u;
+ } STRUCT_PACKED action;
+ } u;
+} STRUCT_PACKED;
+
+
+#define IEEE80211_MAX_MMPDU_SIZE 2304
+
+/* Rx MCS bitmask is in the first 77 bits of supported_mcs_set */
+#define IEEE80211_HT_MCS_MASK_LEN 10
+
+/* HT Capabilities element */
+struct ieee80211_ht_capabilities {
+ le16 ht_capabilities_info;
+ u8 a_mpdu_params; /* Maximum A-MPDU Length Exponent B0..B1
+ * Minimum MPDU Start Spacing B2..B4
+ * Reserved B5..B7 */
+ u8 supported_mcs_set[16];
+ le16 ht_extended_capabilities;
+ le32 tx_bf_capability_info;
+ u8 asel_capabilities;
+} STRUCT_PACKED;
+
+
+/* HT Operation element */
+struct ieee80211_ht_operation {
+ u8 primary_chan;
+ /* Five octets of HT Operation Information */
+ u8 ht_param; /* B0..B7 */
+ le16 operation_mode; /* B8..B23 */
+ le16 param; /* B24..B39 */
+ u8 basic_mcs_set[16];
+} STRUCT_PACKED;
+
+
+struct ieee80211_obss_scan_parameters {
+ le16 scan_passive_dwell;
+ le16 scan_active_dwell;
+ le16 width_trigger_scan_interval;
+ le16 scan_passive_total_per_channel;
+ le16 scan_active_total_per_channel;
+ le16 channel_transition_delay_factor;
+ le16 scan_activity_threshold;
+} STRUCT_PACKED;
+
+
+struct ieee80211_vht_capabilities {
+ le32 vht_capabilities_info;
+ struct {
+ le16 rx_map;
+ le16 rx_highest;
+ le16 tx_map;
+ le16 tx_highest;
+ } vht_supported_mcs_set;
+} STRUCT_PACKED;
+
+struct ieee80211_vht_operation {
+ u8 vht_op_info_chwidth;
+ u8 vht_op_info_chan_center_freq_seg0_idx;
+ u8 vht_op_info_chan_center_freq_seg1_idx;
+ le16 vht_basic_mcs_set;
+} STRUCT_PACKED;
+
+struct ieee80211_ampe_ie {
+ u8 selected_pairwise_suite[4];
+ u8 local_nonce[32];
+ u8 peer_nonce[32];
+ /* Followed by
+ * Key Replay Counter[8] (optional)
+ * (only in Mesh Group Key Inform/Acknowledge frames)
+ * GTKdata[variable] (optional)
+ * (MGTK[variable] || Key RSC[8] || GTKExpirationTime[4])
+ * IGTKdata[variable] (optional)
+ * (Key ID[2], IPN[6], IGTK[variable] in IGTK KDE format)
+ */
+} STRUCT_PACKED;
+
+#ifdef _MSC_VER
+#pragma pack(pop)
+#endif /* _MSC_VER */
+
+#define ERP_INFO_NON_ERP_PRESENT BIT(0)
+#define ERP_INFO_USE_PROTECTION BIT(1)
+#define ERP_INFO_BARKER_PREAMBLE_MODE BIT(2)
+
+#define OVERLAPPING_BSS_TRANS_DELAY_FACTOR 5
+
+/* HT Capabilities Info field within HT Capabilities element */
+#define HT_CAP_INFO_LDPC_CODING_CAP ((u16) BIT(0))
+#define HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET ((u16) BIT(1))
+#define HT_CAP_INFO_SMPS_MASK ((u16) (BIT(2) | BIT(3)))
+#define HT_CAP_INFO_SMPS_STATIC ((u16) 0)
+#define HT_CAP_INFO_SMPS_DYNAMIC ((u16) BIT(2))
+#define HT_CAP_INFO_SMPS_DISABLED ((u16) (BIT(2) | BIT(3)))
+#define HT_CAP_INFO_GREEN_FIELD ((u16) BIT(4))
+#define HT_CAP_INFO_SHORT_GI20MHZ ((u16) BIT(5))
+#define HT_CAP_INFO_SHORT_GI40MHZ ((u16) BIT(6))
+#define HT_CAP_INFO_TX_STBC ((u16) BIT(7))
+#define HT_CAP_INFO_RX_STBC_MASK ((u16) (BIT(8) | BIT(9)))
+#define HT_CAP_INFO_RX_STBC_1 ((u16) BIT(8))
+#define HT_CAP_INFO_RX_STBC_12 ((u16) BIT(9))
+#define HT_CAP_INFO_RX_STBC_123 ((u16) (BIT(8) | BIT(9)))
+#define HT_CAP_INFO_DELAYED_BA ((u16) BIT(10))
+#define HT_CAP_INFO_MAX_AMSDU_SIZE ((u16) BIT(11))
+#define HT_CAP_INFO_DSSS_CCK40MHZ ((u16) BIT(12))
+/* B13 - Reserved (was PSMP support during P802.11n development) */
+#define HT_CAP_INFO_40MHZ_INTOLERANT ((u16) BIT(14))
+#define HT_CAP_INFO_LSIG_TXOP_PROTECT_SUPPORT ((u16) BIT(15))
+
+/* HT Extended Capabilities field within HT Capabilities element */
+#define EXT_HT_CAP_INFO_PCO ((u16) BIT(0))
+#define EXT_HT_CAP_INFO_PCO_TRANS_TIME_MASK ((u16) (BIT(1) | BIT(2)))
+#define EXT_HT_CAP_INFO_TRANS_TIME_OFFSET 1
+/* B3..B7 - Reserved */
+#define EXT_HT_CAP_INFO_MCS_FEEDBACK_MASK ((u16) (BIT(8) | BIT(9)))
+#define EXT_HT_CAP_INFO_MCS_FEEDBACK_OFFSET 8
+#define EXT_HT_CAP_INFO_HTC_SUPPORT ((u16) BIT(10))
+#define EXT_HT_CAP_INFO_RD_RESPONDER ((u16) BIT(11))
+/* B12..B15 - Reserved */
+
+/* Transmit Beanforming Capabilities within HT Capabilities element */
+#define TX_BF_CAP_IMPLICIT_TXBF_RX_CAP ((u32) BIT(0))
+#define TX_BF_CAP_RX_STAGGERED_SOUNDING_CAP ((u32) BIT(1))
+#define TX_BF_CAP_TX_STAGGERED_SOUNDING_CAP ((u32) BIT(2))
+#define TX_BF_CAP_RX_NDP_CAP ((u32) BIT(3))
+#define TX_BF_CAP_TX_NDP_CAP ((u32) BIT(4))
+#define TX_BF_CAP_IMPLICIT_TX_BF_CAP ((u32) BIT(5))
+#define TX_BF_CAP_CALIBRATION_MASK ((u32) (BIT(6) | BIT(7))
+#define TX_BF_CAP_CALIB_OFFSET 6
+#define TX_BF_CAP_EXPLICIT_CSI_TXBF_CAP ((u32) BIT(8))
+#define TX_BF_CAP_EXPLICIT_NONCOMPR_STEERING_CAP ((u32) BIT(9))
+#define TX_BF_CAP_EXPLICIT_COMPR_STEERING_CAP ((u32) BIT(10))
+#define TX_BF_CAP_EXPLICIT_TX_BF_CSI_FEEDBACK_MASK ((u32) (BIT(10) | BIT(11)))
+#define TX_BF_CAP_EXPLICIT_BF_CSI_FEEDBACK_OFFSET 11
+#define TX_BF_CAP_EXPLICIT_UNCOMPR_STEERING_MATRIX_FEEDBACK_OFFSET 13
+#define TX_BF_CAP_EXPLICIT_COMPRESSED_STEERING_MATRIX_FEEDBACK_OFFSET 15
+#define TX_BF_CAP_MINIMAL_GROUPING_OFFSET 17
+#define TX_BF_CAP_CSI_NUM_BEAMFORMER_ANT_OFFSET 19
+#define TX_BF_CAP_UNCOMPRESSED_STEERING_MATRIX_BEAMFORMER_ANT_OFFSET 21
+#define TX_BF_CAP_COMPRESSED_STEERING_MATRIX_BEAMFORMER_ANT_OFFSET 23
+#define TX_BF_CAP_SCI_MAX_OF_ROWS_BEANFORMER_SUPPORTED_OFFSET 25
+#define TX_BF_CAP_CHANNEL_ESTIMATION_CAP_MASK ((u32) (BIT(27) | BIT(28)))
+#define TX_BF_CAP_CHANNEL_ESTIMATION_CAP_OFFSET 27
+/* B29..B31 - Reserved */
+
+/* ASEL Capability field within HT Capabilities element */
+#define ASEL_CAP_ASEL_CAPABLE ((u8) BIT(0))
+#define ASEL_CAP_EXPLICIT_CSI_FEEDBACK_BASED_TX_AS_CAP ((u8) BIT(1))
+#define ASEL_CAP_ANT_INDICES_FEEDBACK_BASED_TX_AS_CAP ((u8) BIT(2))
+#define ASEL_CAP_EXPLICIT_CSI_FEEDBACK_CAP ((u8) BIT(3))
+#define ASEL_CAP_ANT_INDICES_FEEDBACK_CAP ((u8) BIT(4))
+#define ASEL_CAP_RX_AS_CAP ((u8) BIT(5))
+#define ASEL_CAP_TX_SOUNDING_PPDUS_CAP ((u8) BIT(6))
+/* B7 - Reserved */
+
+/* First octet of HT Operation Information within HT Operation element */
+#define HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK ((u8) BIT(0) | BIT(1))
+#define HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE ((u8) BIT(0))
+#define HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW ((u8) BIT(0) | BIT(1))
+#define HT_INFO_HT_PARAM_STA_CHNL_WIDTH ((u8) BIT(2))
+#define HT_INFO_HT_PARAM_RIFS_MODE ((u8) BIT(3))
+/* B4..B7 - Reserved */
+
+/* HT Protection (B8..B9 of HT Operation Information) */
+#define HT_PROT_NO_PROTECTION 0
+#define HT_PROT_NONMEMBER_PROTECTION 1
+#define HT_PROT_20MHZ_PROTECTION 2
+#define HT_PROT_NON_HT_MIXED 3
+/* Bits within ieee80211_ht_operation::operation_mode (BIT(0) maps to B8 in
+ * HT Operation Information) */
+#define HT_OPER_OP_MODE_HT_PROT_MASK ((u16) (BIT(0) | BIT(1))) /* B8..B9 */
+#define HT_OPER_OP_MODE_NON_GF_HT_STAS_PRESENT ((u16) BIT(2)) /* B10 */
+/* BIT(3), i.e., B11 in HT Operation Information field - Reserved */
+#define HT_OPER_OP_MODE_OBSS_NON_HT_STAS_PRESENT ((u16) BIT(4)) /* B12 */
+/* BIT(5)..BIT(15), i.e., B13..B23 - Reserved */
+
+/* Last two octets of HT Operation Information (BIT(0) = B24) */
+/* B24..B29 - Reserved */
+#define HT_OPER_PARAM_DUAL_BEACON ((u16) BIT(6))
+#define HT_OPER_PARAM_DUAL_CTS_PROTECTION ((u16) BIT(7))
+#define HT_OPER_PARAM_STBC_BEACON ((u16) BIT(8))
+#define HT_OPER_PARAM_LSIG_TXOP_PROT_FULL_SUPP ((u16) BIT(9))
+#define HT_OPER_PARAM_PCO_ACTIVE ((u16) BIT(10))
+#define HT_OPER_PARAM_PCO_PHASE ((u16) BIT(11))
+/* B36..B39 - Reserved */
+
+#define BSS_MEMBERSHIP_SELECTOR_VHT_PHY 126
+#define BSS_MEMBERSHIP_SELECTOR_HT_PHY 127
+#define BSS_MEMBERSHIP_SELECTOR_SAE_H2E_ONLY 123
+
+/* VHT Defines */
+#define VHT_CAP_MAX_MPDU_LENGTH_7991 ((u32) BIT(0))
+#define VHT_CAP_MAX_MPDU_LENGTH_11454 ((u32) BIT(1))
+#define VHT_CAP_MAX_MPDU_LENGTH_MASK ((u32) BIT(0) | BIT(1))
+#define VHT_CAP_MAX_MPDU_LENGTH_MASK_SHIFT 0
+#define VHT_CAP_SUPP_CHAN_WIDTH_160MHZ ((u32) BIT(2))
+#define VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ ((u32) BIT(3))
+#define VHT_CAP_SUPP_CHAN_WIDTH_MASK ((u32) BIT(2) | BIT(3))
+#define VHT_CAP_SUPP_CHAN_WIDTH_MASK_SHIFT 2
+#define VHT_CAP_RXLDPC ((u32) BIT(4))
+#define VHT_CAP_SHORT_GI_80 ((u32) BIT(5))
+#define VHT_CAP_SHORT_GI_160 ((u32) BIT(6))
+#define VHT_CAP_TXSTBC ((u32) BIT(7))
+#define VHT_CAP_RXSTBC_1 ((u32) BIT(8))
+#define VHT_CAP_RXSTBC_2 ((u32) BIT(9))
+#define VHT_CAP_RXSTBC_3 ((u32) BIT(8) | BIT(9))
+#define VHT_CAP_RXSTBC_4 ((u32) BIT(10))
+#define VHT_CAP_RXSTBC_MASK ((u32) BIT(8) | BIT(9) | \
+ BIT(10))
+#define VHT_CAP_RXSTBC_MASK_SHIFT 8
+#define VHT_CAP_SU_BEAMFORMER_CAPABLE ((u32) BIT(11))
+#define VHT_CAP_SU_BEAMFORMEE_CAPABLE ((u32) BIT(12))
+#define VHT_CAP_BEAMFORMEE_STS_MAX ((u32) BIT(13) | \
+ BIT(14) | BIT(15))
+#define VHT_CAP_BEAMFORMEE_STS_MAX_SHIFT 13
+#define VHT_CAP_BEAMFORMEE_STS_OFFSET 13
+#define VHT_CAP_SOUNDING_DIMENSION_MAX ((u32) BIT(16) | \
+ BIT(17) | BIT(18))
+#define VHT_CAP_SOUNDING_DIMENSION_MAX_SHIFT 16
+#define VHT_CAP_SOUNDING_DIMENSION_OFFSET 16
+#define VHT_CAP_MU_BEAMFORMER_CAPABLE ((u32) BIT(19))
+#define VHT_CAP_MU_BEAMFORMEE_CAPABLE ((u32) BIT(20))
+#define VHT_CAP_VHT_TXOP_PS ((u32) BIT(21))
+#define VHT_CAP_HTC_VHT ((u32) BIT(22))
+
+#define VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_1 ((u32) BIT(23))
+#define VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_2 ((u32) BIT(24))
+#define VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_3 ((u32) BIT(23) | BIT(24))
+#define VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_4 ((u32) BIT(25))
+#define VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_5 ((u32) BIT(23) | BIT(25))
+#define VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_6 ((u32) BIT(24) | BIT(25))
+#define VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MAX ((u32) BIT(23) | \
+ BIT(24) | BIT(25))
+#define VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MAX_SHIFT 23
+#define VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB ((u32) BIT(27))
+#define VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB ((u32) BIT(26) | BIT(27))
+#define VHT_CAP_RX_ANTENNA_PATTERN ((u32) BIT(28))
+#define VHT_CAP_TX_ANTENNA_PATTERN ((u32) BIT(29))
+
+#define VHT_OPMODE_CHANNEL_WIDTH_MASK ((u8) BIT(0) | BIT(1))
+#define VHT_OPMODE_CHANNEL_RxNSS_MASK ((u8) BIT(4) | BIT(5) | \
+ BIT(6))
+#define VHT_OPMODE_NOTIF_RX_NSS_SHIFT 4
+
+#define VHT_RX_NSS_MAX_STREAMS 8
+
+/* VHT/EDMG channel widths */
+#define CHANWIDTH_USE_HT 0
+#define CHANWIDTH_80MHZ 1
+#define CHANWIDTH_160MHZ 2
+#define CHANWIDTH_80P80MHZ 3
+#define CHANWIDTH_2160MHZ 4
+#define CHANWIDTH_4320MHZ 5
+#define CHANWIDTH_6480MHZ 6
+#define CHANWIDTH_8640MHZ 7
+#define CHANWIDTH_40MHZ_6GHZ 8
+
+#define HE_NSS_MAX_STREAMS 8
+
+#define OUI_MICROSOFT 0x0050f2 /* Microsoft (also used in Wi-Fi specs)
+ * 00:50:F2 */
+#define WPA_IE_VENDOR_TYPE 0x0050f201
+#define WMM_IE_VENDOR_TYPE 0x0050f202
+#define WPS_IE_VENDOR_TYPE 0x0050f204
+#define OUI_WFA 0x506f9a
+#define P2P_IE_VENDOR_TYPE 0x506f9a09
+#define WFD_IE_VENDOR_TYPE 0x506f9a0a
+#define WFD_OUI_TYPE 10
+#define HS20_IE_VENDOR_TYPE 0x506f9a10
+#define OSEN_IE_VENDOR_TYPE 0x506f9a12
+#define MBO_IE_VENDOR_TYPE 0x506f9a16
+#define MBO_OUI_TYPE 22
+#define OWE_IE_VENDOR_TYPE 0x506f9a1c
+#define OWE_OUI_TYPE 28
+#define MULTI_AP_OUI_TYPE 0x1B
+#define DPP_CC_IE_VENDOR_TYPE 0x506f9a1e
+#define DPP_CC_OUI_TYPE 0x1e
+#define SAE_PK_IE_VENDOR_TYPE 0x506f9a1f
+#define SAE_PK_OUI_TYPE 0x1f
+#define QM_IE_VENDOR_TYPE 0x506f9a22
+#define QM_IE_OUI_TYPE 0x22
+#define WFA_CAPA_IE_VENDOR_TYPE 0x506f9a23
+#define WFA_CAPA_OUI_TYPE 0x23
+
+#define MULTI_AP_SUB_ELEM_TYPE 0x06
+#define MULTI_AP_TEAR_DOWN BIT(4)
+#define MULTI_AP_FRONTHAUL_BSS BIT(5)
+#define MULTI_AP_BACKHAUL_BSS BIT(6)
+#define MULTI_AP_BACKHAUL_STA BIT(7)
+
+#define WMM_OUI_TYPE 2
+#define WMM_OUI_SUBTYPE_INFORMATION_ELEMENT 0
+#define WMM_OUI_SUBTYPE_PARAMETER_ELEMENT 1
+#define WMM_OUI_SUBTYPE_TSPEC_ELEMENT 2
+#define WMM_VERSION 1
+
+#define WMM_ACTION_CODE_ADDTS_REQ 0
+#define WMM_ACTION_CODE_ADDTS_RESP 1
+#define WMM_ACTION_CODE_DELTS 2
+
+#define WMM_ADDTS_STATUS_ADMISSION_ACCEPTED 0
+#define WMM_ADDTS_STATUS_INVALID_PARAMETERS 1
+/* 2 - Reserved */
+#define WMM_ADDTS_STATUS_REFUSED 3
+/* 4-255 - Reserved */
+
+/* WMM TSPEC Direction Field Values */
+#define WMM_TSPEC_DIRECTION_UPLINK 0
+#define WMM_TSPEC_DIRECTION_DOWNLINK 1
+/* 2 - Reserved */
+#define WMM_TSPEC_DIRECTION_BI_DIRECTIONAL 3
+
+/*
+ * WMM Information Element (used in (Re)Association Request frames; may also be
+ * used in Beacon frames)
+ */
+struct wmm_information_element {
+ /* Element ID: 221 (0xdd); Length: 7 */
+ /* required fields for WMM version 1 */
+ u8 oui[3]; /* 00:50:f2 */
+ u8 oui_type; /* 2 */
+ u8 oui_subtype; /* 0 */
+ u8 version; /* 1 for WMM version 1.0 */
+ u8 qos_info; /* AP/STA specific QoS info */
+
+} STRUCT_PACKED;
+
+#define WMM_QOSINFO_AP_UAPSD 0x80
+
+#define WMM_QOSINFO_STA_AC_MASK 0x0f
+#define WMM_QOSINFO_STA_SP_MASK 0x03
+#define WMM_QOSINFO_STA_SP_SHIFT 5
+
+#define WMM_AC_AIFSN_MASK 0x0f
+#define WMM_AC_AIFNS_SHIFT 0
+#define WMM_AC_ACM 0x10
+#define WMM_AC_ACI_MASK 0x60
+#define WMM_AC_ACI_SHIFT 5
+
+#define WMM_AC_ECWMIN_MASK 0x0f
+#define WMM_AC_ECWMIN_SHIFT 0
+#define WMM_AC_ECWMAX_MASK 0xf0
+#define WMM_AC_ECWMAX_SHIFT 4
+
+struct wmm_ac_parameter {
+ u8 aci_aifsn; /* AIFSN, ACM, ACI */
+ u8 cw; /* ECWmin, ECWmax (CW = 2^ECW - 1) */
+ le16 txop_limit;
+} STRUCT_PACKED;
+
+/*
+ * WMM Parameter Element (used in Beacon, Probe Response, and (Re)Association
+ * Response frmaes)
+ */
+struct wmm_parameter_element {
+ /* Element ID: 221 (0xdd); Length: 24 */
+ /* required fields for WMM version 1 */
+ u8 oui[3]; /* 00:50:f2 */
+ u8 oui_type; /* 2 */
+ u8 oui_subtype; /* 1 */
+ u8 version; /* 1 for WMM version 1.0 */
+ u8 qos_info; /* AP/STA specific QoS info */
+ u8 reserved; /* 0 */
+ struct wmm_ac_parameter ac[4]; /* AC_BE, AC_BK, AC_VI, AC_VO */
+
+} STRUCT_PACKED;
+
+/* WMM TSPEC Element */
+struct wmm_tspec_element {
+ u8 eid; /* 221 = 0xdd */
+ u8 length; /* 6 + 55 = 61 */
+ u8 oui[3]; /* 00:50:f2 */
+ u8 oui_type; /* 2 */
+ u8 oui_subtype; /* 2 */
+ u8 version; /* 1 */
+ /* WMM TSPEC body (55 octets): */
+ u8 ts_info[3];
+ le16 nominal_msdu_size;
+ le16 maximum_msdu_size;
+ le32 minimum_service_interval;
+ le32 maximum_service_interval;
+ le32 inactivity_interval;
+ le32 suspension_interval;
+ le32 service_start_time;
+ le32 minimum_data_rate;
+ le32 mean_data_rate;
+ le32 peak_data_rate;
+ le32 maximum_burst_size;
+ le32 delay_bound;
+ le32 minimum_phy_rate;
+ le16 surplus_bandwidth_allowance;
+ le16 medium_time;
+} STRUCT_PACKED;
+
+
+/* Access Categories / ACI to AC coding */
+enum wmm_ac {
+ WMM_AC_BE = 0 /* Best Effort */,
+ WMM_AC_BK = 1 /* Background */,
+ WMM_AC_VI = 2 /* Video */,
+ WMM_AC_VO = 3 /* Voice */,
+ WMM_AC_NUM = 4
+};
+
+
+#define HS20_INDICATION_OUI_TYPE 16
+#define HS20_ANQP_OUI_TYPE 17
+#define HS20_OSEN_OUI_TYPE 18
+#define HS20_ROAMING_CONS_SEL_OUI_TYPE 29
+#define HS20_STYPE_QUERY_LIST 1
+#define HS20_STYPE_CAPABILITY_LIST 2
+#define HS20_STYPE_OPERATOR_FRIENDLY_NAME 3
+#define HS20_STYPE_WAN_METRICS 4
+#define HS20_STYPE_CONNECTION_CAPABILITY 5
+#define HS20_STYPE_NAI_HOME_REALM_QUERY 6
+#define HS20_STYPE_OPERATING_CLASS 7
+#define HS20_STYPE_OSU_PROVIDERS_LIST 8
+#define HS20_STYPE_ICON_REQUEST 10
+#define HS20_STYPE_ICON_BINARY_FILE 11
+#define HS20_STYPE_OPERATOR_ICON_METADATA 12
+#define HS20_STYPE_OSU_PROVIDERS_NAI_LIST 13
+
+#define HS20_DGAF_DISABLED 0x01
+#define HS20_PPS_MO_ID_PRESENT 0x02
+#define HS20_ANQP_DOMAIN_ID_PRESENT 0x04
+#ifndef HS20_VERSION
+#define HS20_VERSION 0x20 /* Release 3 */
+#endif /* HS20_VERSION */
+
+/* WNM-Notification WFA vendors specific subtypes */
+#define HS20_WNM_SUB_REM_NEEDED 0
+#define HS20_WNM_DEAUTH_IMMINENT_NOTICE 1
+#define WFA_WNM_NOTIF_SUBELEM_NON_PREF_CHAN_REPORT 2
+#define WFA_WNM_NOTIF_SUBELEM_CELL_DATA_CAPA 3
+#define HS20_WNM_T_C_ACCEPTANCE 4
+
+#define HS20_DEAUTH_REASON_CODE_BSS 0
+#define HS20_DEAUTH_REASON_CODE_ESS 1
+
+/* MBO v0.0_r19, 4.2: MBO Attributes */
+/* Table 4-5: MBO Attributes */
+/* OCE v0.0.10, Table 4-3: OCE Attributes */
+enum mbo_attr_id {
+ MBO_ATTR_ID_AP_CAPA_IND = 1,
+ MBO_ATTR_ID_NON_PREF_CHAN_REPORT = 2,
+ MBO_ATTR_ID_CELL_DATA_CAPA = 3,
+ MBO_ATTR_ID_ASSOC_DISALLOW = 4,
+ MBO_ATTR_ID_CELL_DATA_PREF = 5,
+ MBO_ATTR_ID_TRANSITION_REASON = 6,
+ MBO_ATTR_ID_TRANSITION_REJECT_REASON = 7,
+ MBO_ATTR_ID_ASSOC_RETRY_DELAY = 8,
+ OCE_ATTR_ID_CAPA_IND = 101,
+ OCE_ATTR_ID_RSSI_BASED_ASSOC_REJECT = 102,
+ OCE_ATTR_ID_REDUCED_WAN_METRICS = 103,
+ OCE_ATTR_ID_RNR_COMPLETENESS = 104,
+};
+
+/* MBO v0.0_r19, 4.2.1: MBO AP Capability Indication Attribute */
+/* Table 4-7: MBO AP Capability Indication Field Values */
+#define MBO_AP_CAPA_CELL_AWARE BIT(6)
+
+/* MBO v0.0_r19, 4.2.2: Non-preferred Channel Report Attribute */
+/* Table 4-10: Reason Code Field Values */
+enum mbo_non_pref_chan_reason {
+ MBO_NON_PREF_CHAN_REASON_UNSPECIFIED = 0,
+ MBO_NON_PREF_CHAN_REASON_RSSI = 1,
+ MBO_NON_PREF_CHAN_REASON_EXT_INTERFERENCE = 2,
+ MBO_NON_PREF_CHAN_REASON_INT_INTERFERENCE = 3,
+};
+
+/* MBO v0.0_r19, 4.2.3: Cellular Data Capabilities Attribute */
+/* Table 4-13: Cellular Data Connectivity Field */
+enum mbo_cellular_capa {
+ MBO_CELL_CAPA_AVAILABLE = 1,
+ MBO_CELL_CAPA_NOT_AVAILABLE = 2,
+ MBO_CELL_CAPA_NOT_SUPPORTED = 3,
+};
+
+/* MBO v0.0_r19, 4.2.4: Association Disallowed Attribute */
+/* Table 4-15: Reason Code Field Values */
+enum mbo_assoc_disallow_reason {
+ MBO_ASSOC_DISALLOW_REASON_UNSPECIFIED = 1,
+ MBO_ASSOC_DISALLOW_REASON_MAX_STA = 2,
+ MBO_ASSOC_DISALLOW_REASON_AIR_INTERFERENCE = 3,
+ MBO_ASSOC_DISALLOW_REASON_AUTH_SERVER_OVERLOAD = 4,
+ MBO_ASSOC_DISALLOW_REASON_LOW_RSSI = 5,
+};
+
+/* MBO v0.0_r19, 4.2.5: Cellular Data Connection Preference Attribute */
+/* Table 4-17: Cellular Preference Field Values */
+enum mbo_cell_pref {
+ MBO_CELL_PREF_EXCLUDED = 0,
+ MBO_CELL_PREF_NO_USE = 1,
+ MBO_CELL_PREF_USE = 255
+};
+
+/* MBO v0.0_r19, 4.2.6: Transition Reason Code Attribute */
+/* Table 4-19: Transition Reason Code Field Values */
+enum mbo_transition_reason {
+ MBO_TRANSITION_REASON_UNSPECIFIED = 0,
+ MBO_TRANSITION_REASON_FRAME_LOSS = 1,
+ MBO_TRANSITION_REASON_DELAY = 2,
+ MBO_TRANSITION_REASON_BANDWIDTH = 3,
+ MBO_TRANSITION_REASON_LOAD_BALANCE = 4,
+ MBO_TRANSITION_REASON_RSSI = 5,
+ MBO_TRANSITION_REASON_RETRANSMISSIONS = 6,
+ MBO_TRANSITION_REASON_INTERFERENCE = 7,
+ MBO_TRANSITION_REASON_GRAY_ZONE = 8,
+ MBO_TRANSITION_REASON_PREMIUM_AP = 9,
+};
+
+/* MBO v0.0_r19, 4.2.7: Transition Rejection Reason Code Attribute */
+/* Table 4-21: Transition Rejection Reason Code Field Values */
+enum mbo_transition_reject_reason {
+ MBO_TRANSITION_REJECT_REASON_UNSPECIFIED = 0,
+ MBO_TRANSITION_REJECT_REASON_FRAME_LOSS = 1,
+ MBO_TRANSITION_REJECT_REASON_DELAY = 2,
+ MBO_TRANSITION_REJECT_REASON_QOS_CAPACITY = 3,
+ MBO_TRANSITION_REJECT_REASON_RSSI = 4,
+ MBO_TRANSITION_REJECT_REASON_INTERFERENCE = 5,
+ MBO_TRANSITION_REJECT_REASON_SERVICES = 6,
+};
+
+/* MBO v0.0_r27, 4.3: MBO ANQP-elements */
+#define MBO_ANQP_OUI_TYPE 0x12
+#define MBO_ANQP_SUBTYPE_QUERY_LIST 1
+#define MBO_ANQP_SUBTYPE_CELL_CONN_PREF 2
+#define MAX_MBO_ANQP_SUBTYPE MBO_ANQP_SUBTYPE_CELL_CONN_PREF
+
+/* OCE v0.0.10, 4.2.1: OCE Capability Indication Attribute */
+#define OCE_RELEASE 1
+#define OCE_RELEASE_MASK (BIT(0) | BIT(1) | BIT(2))
+#define OCE_IS_STA_CFON BIT(3)
+#define OCE_IS_NON_OCE_AP_PRESENT BIT(4)
+
+/* Wi-Fi Direct (P2P) */
+
+#define P2P_OUI_TYPE 9
+
+enum p2p_attr_id {
+ P2P_ATTR_STATUS = 0,
+ P2P_ATTR_MINOR_REASON_CODE = 1,
+ P2P_ATTR_CAPABILITY = 2,
+ P2P_ATTR_DEVICE_ID = 3,
+ P2P_ATTR_GROUP_OWNER_INTENT = 4,
+ P2P_ATTR_CONFIGURATION_TIMEOUT = 5,
+ P2P_ATTR_LISTEN_CHANNEL = 6,
+ P2P_ATTR_GROUP_BSSID = 7,
+ P2P_ATTR_EXT_LISTEN_TIMING = 8,
+ P2P_ATTR_INTENDED_INTERFACE_ADDR = 9,
+ P2P_ATTR_MANAGEABILITY = 10,
+ P2P_ATTR_CHANNEL_LIST = 11,
+ P2P_ATTR_NOTICE_OF_ABSENCE = 12,
+ P2P_ATTR_DEVICE_INFO = 13,
+ P2P_ATTR_GROUP_INFO = 14,
+ P2P_ATTR_GROUP_ID = 15,
+ P2P_ATTR_INTERFACE = 16,
+ P2P_ATTR_OPERATING_CHANNEL = 17,
+ P2P_ATTR_INVITATION_FLAGS = 18,
+ P2P_ATTR_OOB_GO_NEG_CHANNEL = 19,
+ P2P_ATTR_SERVICE_HASH = 21,
+ P2P_ATTR_SESSION_INFORMATION_DATA = 22,
+ P2P_ATTR_CONNECTION_CAPABILITY = 23,
+ P2P_ATTR_ADVERTISEMENT_ID = 24,
+ P2P_ATTR_ADVERTISED_SERVICE = 25,
+ P2P_ATTR_SESSION_ID = 26,
+ P2P_ATTR_FEATURE_CAPABILITY = 27,
+ P2P_ATTR_PERSISTENT_GROUP = 28,
+ P2P_ATTR_VENDOR_SPECIFIC = 221
+};
+
+#define P2P_MAX_GO_INTENT 15
+
+/* P2P Capability - Device Capability bitmap */
+#define P2P_DEV_CAPAB_SERVICE_DISCOVERY BIT(0)
+#define P2P_DEV_CAPAB_CLIENT_DISCOVERABILITY BIT(1)
+#define P2P_DEV_CAPAB_CONCURRENT_OPER BIT(2)
+#define P2P_DEV_CAPAB_INFRA_MANAGED BIT(3)
+#define P2P_DEV_CAPAB_DEVICE_LIMIT BIT(4)
+#define P2P_DEV_CAPAB_INVITATION_PROCEDURE BIT(5)
+#define P2P_DEV_CAPAB_6GHZ_BAND_CAPABLE BIT(6)
+
+/* P2P Capability - Group Capability bitmap */
+#define P2P_GROUP_CAPAB_GROUP_OWNER BIT(0)
+#define P2P_GROUP_CAPAB_PERSISTENT_GROUP BIT(1)
+#define P2P_GROUP_CAPAB_GROUP_LIMIT BIT(2)
+#define P2P_GROUP_CAPAB_INTRA_BSS_DIST BIT(3)
+#define P2P_GROUP_CAPAB_CROSS_CONN BIT(4)
+#define P2P_GROUP_CAPAB_PERSISTENT_RECONN BIT(5)
+#define P2P_GROUP_CAPAB_GROUP_FORMATION BIT(6)
+#define P2P_GROUP_CAPAB_IP_ADDR_ALLOCATION BIT(7)
+
+/* P2PS Coordination Protocol Transport Bitmap */
+#define P2PS_FEATURE_CAPAB_UDP_TRANSPORT BIT(0)
+#define P2PS_FEATURE_CAPAB_MAC_TRANSPORT BIT(1)
+
+struct p2ps_feature_capab {
+ u8 cpt;
+ u8 reserved;
+} STRUCT_PACKED;
+
+/* Invitation Flags */
+#define P2P_INVITATION_FLAGS_TYPE BIT(0)
+
+/* P2P Manageability */
+#define P2P_MAN_DEVICE_MANAGEMENT BIT(0)
+#define P2P_MAN_CROSS_CONNECTION_PERMITTED BIT(1)
+#define P2P_MAN_COEXISTENCE_OPTIONAL BIT(2)
+
+enum p2p_status_code {
+ P2P_SC_SUCCESS = 0,
+ P2P_SC_FAIL_INFO_CURRENTLY_UNAVAILABLE = 1,
+ P2P_SC_FAIL_INCOMPATIBLE_PARAMS = 2,
+ P2P_SC_FAIL_LIMIT_REACHED = 3,
+ P2P_SC_FAIL_INVALID_PARAMS = 4,
+ P2P_SC_FAIL_UNABLE_TO_ACCOMMODATE = 5,
+ P2P_SC_FAIL_PREV_PROTOCOL_ERROR = 6,
+ P2P_SC_FAIL_NO_COMMON_CHANNELS = 7,
+ P2P_SC_FAIL_UNKNOWN_GROUP = 8,
+ P2P_SC_FAIL_BOTH_GO_INTENT_15 = 9,
+ P2P_SC_FAIL_INCOMPATIBLE_PROV_METHOD = 10,
+ P2P_SC_FAIL_REJECTED_BY_USER = 11,
+ P2P_SC_SUCCESS_DEFERRED = 12,
+};
+
+enum p2p_role_indication {
+ P2P_DEVICE_NOT_IN_GROUP = 0x00,
+ P2P_CLIENT_IN_A_GROUP = 0x01,
+ P2P_GO_IN_A_GROUP = 0x02,
+};
+
+#define P2P_WILDCARD_SSID "DIRECT-"
+#define P2P_WILDCARD_SSID_LEN 7
+
+/* P2P action frames */
+enum p2p_act_frame_type {
+ P2P_NOA = 0,
+ P2P_PRESENCE_REQ = 1,
+ P2P_PRESENCE_RESP = 2,
+ P2P_GO_DISC_REQ = 3
+};
+
+/* P2P public action frames */
+enum p2p_action_frame_type {
+ P2P_GO_NEG_REQ = 0,
+ P2P_GO_NEG_RESP = 1,
+ P2P_GO_NEG_CONF = 2,
+ P2P_INVITATION_REQ = 3,
+ P2P_INVITATION_RESP = 4,
+ P2P_DEV_DISC_REQ = 5,
+ P2P_DEV_DISC_RESP = 6,
+ P2P_PROV_DISC_REQ = 7,
+ P2P_PROV_DISC_RESP = 8
+};
+
+enum p2p_service_protocol_type {
+ P2P_SERV_ALL_SERVICES = 0,
+ P2P_SERV_BONJOUR = 1,
+ P2P_SERV_UPNP = 2,
+ P2P_SERV_WS_DISCOVERY = 3,
+ P2P_SERV_WIFI_DISPLAY = 4,
+ P2P_SERV_P2PS = 11,
+ P2P_SERV_VENDOR_SPECIFIC = 255
+};
+
+enum p2p_sd_status {
+ P2P_SD_SUCCESS = 0,
+ P2P_SD_PROTO_NOT_AVAILABLE = 1,
+ P2P_SD_REQUESTED_INFO_NOT_AVAILABLE = 2,
+ P2P_SD_BAD_REQUEST = 3
+};
+
+
+enum wifi_display_subelem {
+ WFD_SUBELEM_DEVICE_INFO = 0,
+ WFD_SUBELEM_ASSOCIATED_BSSID = 1,
+ WFD_SUBELEM_AUDIO_FORMATS = 2,
+ WFD_SUBELEM_VIDEO_FORMATS = 3,
+ WFD_SUBELEM_3D_VIDEO_FORMATS = 4,
+ WFD_SUBELEM_CONTENT_PROTECTION = 5,
+ WFD_SUBELEM_COUPLED_SINK = 6,
+ WFD_SUBELEM_EXT_CAPAB = 7,
+ WFD_SUBELEM_LOCAL_IP_ADDRESS = 8,
+ WFD_SUBELEM_SESSION_INFO = 9,
+ WFD_SUBELEM_MAC_INFO = 10,
+ WFD_SUBELEM_R2_DEVICE_INFO = 11,
+};
+
+/* 802.11s */
+#define MESH_SYNC_METHOD_NEIGHBOR_OFFSET 1
+#define MESH_SYNC_METHOD_VENDOR 255
+#define MESH_PATH_PROTOCOL_HWMP 1
+#define MESH_PATH_PROTOCOL_VENDOR 255
+#define MESH_PATH_METRIC_AIRTIME 1
+#define MESH_PATH_METRIC_VENDOR 255
+/* IEEE 802.11s - Mesh Capability */
+#define MESH_CAP_ACCEPT_ADDITIONAL_PEER BIT(0)
+#define MESH_CAP_MCCA_SUPPORTED BIT(1)
+#define MESH_CAP_MCCA_ENABLED BIT(2)
+#define MESH_CAP_FORWARDING BIT(3)
+#define MESH_CAP_MBCA_ENABLED BIT(4)
+#define MESH_CAP_TBTT_ADJUSTING BIT(5)
+#define MESH_CAP_MESH_PS_LEVEL BIT(6)
+
+enum plink_action_field {
+ PLINK_OPEN = 1,
+ PLINK_CONFIRM,
+ PLINK_CLOSE
+};
+
+#define OUI_BROADCOM 0x00904c /* Broadcom (Epigram) */
+#define VENDOR_VHT_TYPE 0x04
+#define VENDOR_VHT_SUBTYPE 0x08
+#define VENDOR_VHT_SUBTYPE2 0x00
+
+#define VENDOR_HT_CAPAB_OUI_TYPE 0x33 /* 00-90-4c:0x33 */
+
+
+/* IEEE 802.11v - WNM Action field values */
+enum wnm_action {
+ WNM_EVENT_REQ = 0,
+ WNM_EVENT_REPORT = 1,
+ WNM_DIAGNOSTIC_REQ = 2,
+ WNM_DIAGNOSTIC_REPORT = 3,
+ WNM_LOCATION_CFG_REQ = 4,
+ WNM_LOCATION_CFG_RESP = 5,
+ WNM_BSS_TRANS_MGMT_QUERY = 6,
+ WNM_BSS_TRANS_MGMT_REQ = 7,
+ WNM_BSS_TRANS_MGMT_RESP = 8,
+ WNM_FMS_REQ = 9,
+ WNM_FMS_RESP = 10,
+ WNM_COLLOCATED_INTERFERENCE_REQ = 11,
+ WNM_COLLOCATED_INTERFERENCE_REPORT = 12,
+ WNM_TFS_REQ = 13,
+ WNM_TFS_RESP = 14,
+ WNM_TFS_NOTIFY = 15,
+ WNM_SLEEP_MODE_REQ = 16,
+ WNM_SLEEP_MODE_RESP = 17,
+ WNM_TIM_BROADCAST_REQ = 18,
+ WNM_TIM_BROADCAST_RESP = 19,
+ WNM_QOS_TRAFFIC_CAPAB_UPDATE = 20,
+ WNM_CHANNEL_USAGE_REQ = 21,
+ WNM_CHANNEL_USAGE_RESP = 22,
+ WNM_DMS_REQ = 23,
+ WNM_DMS_RESP = 24,
+ WNM_TIMING_MEASUREMENT_REQ = 25,
+ WNM_NOTIFICATION_REQ = 26,
+ WNM_NOTIFICATION_RESP = 27
+};
+
+/* IEEE 802.11v - BSS Transition Management Request - Request Mode */
+#define WNM_BSS_TM_REQ_PREF_CAND_LIST_INCLUDED BIT(0)
+#define WNM_BSS_TM_REQ_ABRIDGED BIT(1)
+#define WNM_BSS_TM_REQ_DISASSOC_IMMINENT BIT(2)
+#define WNM_BSS_TM_REQ_BSS_TERMINATION_INCLUDED BIT(3)
+#define WNM_BSS_TM_REQ_ESS_DISASSOC_IMMINENT BIT(4)
+
+/* IEEE Std 802.11-2012 - Table 8-253 */
+enum bss_trans_mgmt_status_code {
+ WNM_BSS_TM_ACCEPT = 0,
+ WNM_BSS_TM_REJECT_UNSPECIFIED = 1,
+ WNM_BSS_TM_REJECT_INSUFFICIENT_BEACON = 2,
+ WNM_BSS_TM_REJECT_INSUFFICIENT_CAPABITY = 3,
+ WNM_BSS_TM_REJECT_UNDESIRED = 4,
+ WNM_BSS_TM_REJECT_DELAY_REQUEST = 5,
+ WNM_BSS_TM_REJECT_STA_CANDIDATE_LIST_PROVIDED = 6,
+ WNM_BSS_TM_REJECT_NO_SUITABLE_CANDIDATES = 7,
+ WNM_BSS_TM_REJECT_LEAVING_ESS = 8
+};
+
+/*
+ * IEEE P802.11-REVmc/D5.0 Table 9-150 - Optional subelement IDs for
+ * neighbor report
+ */
+#define WNM_NEIGHBOR_TSF 1
+#define WNM_NEIGHBOR_CONDENSED_COUNTRY_STRING 2
+#define WNM_NEIGHBOR_BSS_TRANSITION_CANDIDATE 3
+#define WNM_NEIGHBOR_BSS_TERMINATION_DURATION 4
+#define WNM_NEIGHBOR_BEARING 5
+#define WNM_NEIGHBOR_WIDE_BW_CHAN 6
+#define WNM_NEIGHBOR_MEASUREMENT_REPORT 39
+#define WNM_NEIGHBOR_HT_CAPAB 45
+#define WNM_NEIGHBOR_HT_OPER 61
+#define WNM_NEIGHBOR_SEC_CHAN_OFFSET 62
+#define WNM_NEIGHBOR_MEASUREMENT_PILOT 66
+#define WNM_NEIGHBOR_RRM_ENABLED_CAPABILITIES 70
+#define WNM_NEIGHBOR_MULTIPLE_BSSID 71
+#define WNM_NEIGHBOR_VHT_CAPAB 191
+#define WNM_NEIGHBOR_VHT_OPER 192
+
+/* QoS action */
+enum qos_action {
+ QOS_ADDTS_REQ = 0,
+ QOS_ADDTS_RESP = 1,
+ QOS_DELTS = 2,
+ QOS_SCHEDULE = 3,
+ QOS_QOS_MAP_CONFIG = 4,
+};
+
+/* IEEE Std 802.11-2012, 8.4.2.62 20/40 BSS Coexistence element */
+#define WLAN_20_40_BSS_COEX_INFO_REQ BIT(0)
+#define WLAN_20_40_BSS_COEX_40MHZ_INTOL BIT(1)
+#define WLAN_20_40_BSS_COEX_20MHZ_WIDTH_REQ BIT(2)
+#define WLAN_20_40_BSS_COEX_OBSS_EXEMPT_REQ BIT(3)
+#define WLAN_20_40_BSS_COEX_OBSS_EXEMPT_GRNT BIT(4)
+
+struct ieee80211_2040_bss_coex_ie {
+ u8 element_id;
+ u8 length;
+ u8 coex_param;
+} STRUCT_PACKED;
+
+struct ieee80211_2040_intol_chan_report {
+ u8 element_id;
+ u8 length;
+ u8 op_class;
+ u8 variable[0]; /* Channel List */
+} STRUCT_PACKED;
+
+/* IEEE 802.11v - WNM-Sleep Mode element */
+struct wnm_sleep_element {
+ u8 eid; /* WLAN_EID_WNMSLEEP */
+ u8 len;
+ u8 action_type; /* WNM_SLEEP_ENTER/WNM_SLEEP_MODE_EXIT */
+ u8 status;
+ le16 intval;
+} STRUCT_PACKED;
+
+#define WNM_SLEEP_MODE_ENTER 0
+#define WNM_SLEEP_MODE_EXIT 1
+
+enum wnm_sleep_mode_response_status {
+ WNM_STATUS_SLEEP_ACCEPT = 0,
+ WNM_STATUS_SLEEP_EXIT_ACCEPT_GTK_UPDATE = 1,
+ WNM_STATUS_DENIED_ACTION = 2,
+ WNM_STATUS_DENIED_TMP = 3,
+ WNM_STATUS_DENIED_KEY = 4,
+ WNM_STATUS_DENIED_OTHER_WNM_SERVICE = 5
+};
+
+/* WNM-Sleep Mode subelement IDs */
+enum wnm_sleep_mode_subelement_id {
+ WNM_SLEEP_SUBELEM_GTK = 0,
+ WNM_SLEEP_SUBELEM_IGTK = 1,
+ WNM_SLEEP_SUBELEM_BIGTK = 2,
+};
+
+/* WNM notification type (IEEE P802.11-REVmd/D3.0, Table 9-430) */
+enum wnm_notification_Type {
+ WNM_NOTIF_TYPE_FIRMWARE_UPDATE = 0,
+ WNM_NOTIF_TYPE_BEACON_PROTECTION_FAILURE = 2,
+ WNM_NOTIF_TYPE_VENDOR_SPECIFIC = 221,
+};
+
+/* Channel Switch modes (802.11h) */
+#define CHAN_SWITCH_MODE_ALLOW_TX 0
+#define CHAN_SWITCH_MODE_BLOCK_TX 1
+
+struct tpc_report {
+ u8 eid;
+ u8 len;
+ u8 tx_power;
+ u8 link_margin;
+} STRUCT_PACKED;
+
+#define RRM_CAPABILITIES_IE_LEN 5
+
+/* IEEE Std 802.11-2012, 8.5.7.4 - Link Measurement Request frame format */
+struct rrm_link_measurement_request {
+ u8 dialog_token;
+ s8 tx_power;
+ s8 max_tp;
+ u8 variable[0];
+} STRUCT_PACKED;
+
+/* IEEE Std 802.11-2012, 8.5.7.5 - Link Measurement Report frame format */
+struct rrm_link_measurement_report {
+ u8 dialog_token;
+ struct tpc_report tpc;
+ u8 rx_ant_id;
+ u8 tx_ant_id;
+ u8 rcpi;
+ u8 rsni;
+ u8 variable[0];
+} STRUCT_PACKED;
+
+/* IEEE Std 802.11-2016, 9.4.2.21 - Measurement Request element */
+struct rrm_measurement_request_element {
+ u8 eid; /* Element ID */
+ u8 len; /* Length */
+ u8 token; /* Measurement Token */
+ u8 mode; /* Measurement Request Mode */
+ u8 type; /* Measurement Type */
+ u8 variable[0]; /* Measurement Request */
+} STRUCT_PACKED;
+
+/* IEEE Std 802.11-2016, Figure 9-148 - Measurement Request Mode field */
+#define MEASUREMENT_REQUEST_MODE_PARALLEL BIT(0)
+#define MEASUREMENT_REQUEST_MODE_ENABLE BIT(1)
+#define MEASUREMENT_REQUEST_MODE_REQUEST BIT(2)
+#define MEASUREMENT_REQUEST_MODE_REPORT BIT(3)
+#define MEASUREMENT_REQUEST_MODE_DURATION_MANDATORY BIT(4)
+
+/* IEEE Std 802.11-2016, 9.4.2.21.7 - Beacon request */
+struct rrm_measurement_beacon_request {
+ u8 oper_class; /* Operating Class */
+ u8 channel; /* Channel Number */
+ le16 rand_interval; /* Randomization Interval (in TUs) */
+ le16 duration; /* Measurement Duration (in TUs) */
+ u8 mode; /* Measurement Mode */
+ u8 bssid[ETH_ALEN]; /* BSSID */
+ u8 variable[0]; /* Optional Subelements */
+} STRUCT_PACKED;
+
+/*
+ * IEEE Std 802.11-2016, Table 9-87 - Measurement Mode definitions for Beacon
+ * request
+ */
+enum beacon_report_mode {
+ BEACON_REPORT_MODE_PASSIVE = 0,
+ BEACON_REPORT_MODE_ACTIVE = 1,
+ BEACON_REPORT_MODE_TABLE = 2,
+};
+
+/* IEEE Std 802.11-2016, Table 9-88 - Beacon Request subelement IDs */
+/* IEEE P802.11-REVmd/D2.0, Table 9-106 - Optional subelement IDs for
+ * Beacon request */
+#define WLAN_BEACON_REQUEST_SUBELEM_SSID 0
+#define WLAN_BEACON_REQUEST_SUBELEM_INFO 1 /* Beacon Reporting */
+#define WLAN_BEACON_REQUEST_SUBELEM_DETAIL 2 /* Reporting Detail */
+#define WLAN_BEACON_REQUEST_SUBELEM_REQUEST 10
+#define WLAN_BEACON_REQUEST_SUBELEM_AP_CHANNEL 51 /* AP Channel Report */
+#define WLAN_BEACON_REQUEST_SUBELEM_LAST_INDICATION 164
+#define WLAN_BEACON_REQUEST_SUBELEM_VENDOR 221
+
+/*
+ * IEEE Std 802.11-2016, Table 9-90 - Reporting Detail values
+ */
+enum beacon_report_detail {
+ /* No fixed-length fields or elements */
+ BEACON_REPORT_DETAIL_NONE = 0,
+ /* All fixed-length fields and any requested elements in the Request
+ * element if present */
+ BEACON_REPORT_DETAIL_REQUESTED_ONLY = 1,
+ /* All fixed-length fields and elements (default, used when Reporting
+ * Detail subelement is not included in a Beacon request) */
+ BEACON_REPORT_DETAIL_ALL_FIELDS_AND_ELEMENTS = 2,
+};
+
+/* IEEE Std 802.11-2016, 9.4.2.22 - Measurement Report element */
+struct rrm_measurement_report_element {
+ u8 eid; /* Element ID */
+ u8 len; /* Length */
+ u8 token; /* Measurement Token */
+ u8 mode; /* Measurement Report Mode */
+ u8 type; /* Measurement Type */
+ u8 variable[0]; /* Measurement Report */
+} STRUCT_PACKED;
+
+/* IEEE Std 802.11-2016, Figure 9-192 - Measurement Report Mode field */
+#define MEASUREMENT_REPORT_MODE_ACCEPT 0
+#define MEASUREMENT_REPORT_MODE_REJECT_LATE BIT(0)
+#define MEASUREMENT_REPORT_MODE_REJECT_INCAPABLE BIT(1)
+#define MEASUREMENT_REPORT_MODE_REJECT_REFUSED BIT(2)
+
+/* IEEE Std 802.11-2016, 9.4.2.22.7 - Beacon report */
+struct rrm_measurement_beacon_report {
+ u8 op_class; /* Operating Class */
+ u8 channel; /* Channel Number */
+ le64 start_time; /* Actual Measurement Start Time
+ * (in TSF of the BSS requesting the measurement) */
+ le16 duration; /* in TUs */
+ u8 report_info; /* Reported Frame Information */
+ u8 rcpi; /* RCPI */
+ u8 rsni; /* RSNI */
+ u8 bssid[ETH_ALEN]; /* BSSID */
+ u8 antenna_id; /* Antenna ID */
+ le32 parent_tsf; /* Parent TSF */
+ u8 variable[0]; /* Optional Subelements */
+} STRUCT_PACKED;
+
+/* IEEE Std 802.11-2016, Table 9-112 - Beacon report Subelement IDs */
+/* IEEE P802.11-REVmd/D2.0, Table 9-130 - Optional subelement IDs for
+ * Beacon report */
+#define WLAN_BEACON_REPORT_SUBELEM_FRAME_BODY 1
+#define WLAN_BEACON_REPORT_SUBELEM_FRAME_BODY_FRAGMENT_ID 2
+#define WLAN_BEACON_REPORT_SUBELEM_LAST_INDICATION 164
+#define WLAN_BEACON_REPORT_SUBELEM_VENDOR 221
+
+/* IEEE P802.11-REVmd/D2.0, Table 9-232 - Data field format of the
+ * Reported Frame Body Fragment ID subelement */
+#define REPORTED_FRAME_BODY_SUBELEM_LEN 4
+#define REPORTED_FRAME_BODY_MORE_FRAGMENTS BIT(7)
+
+/* IEEE P802.11-REVmd/D2.0, 9.4.2.21.7 - Beacon report */
+#define BEACON_REPORT_LAST_INDICATION_SUBELEM_LEN 3
+
+/* IEEE Std 802.11ad-2012 - Multi-band element */
+struct multi_band_ie {
+ u8 eid; /* WLAN_EID_MULTI_BAND */
+ u8 len;
+ u8 mb_ctrl;
+ u8 band_id;
+ u8 op_class;
+ u8 chan;
+ u8 bssid[ETH_ALEN];
+ le16 beacon_int;
+ u8 tsf_offs[8];
+ u8 mb_connection_capability;
+ u8 fst_session_tmout;
+ /* Optional:
+ * STA MAC Address
+ * Pairwise Cipher Suite Count
+ * Pairwise Cipher Suite List
+ */
+ u8 variable[0];
+} STRUCT_PACKED;
+
+enum mb_ctrl_sta_role {
+ MB_STA_ROLE_AP = 0,
+ MB_STA_ROLE_TDLS_STA = 1,
+ MB_STA_ROLE_IBSS_STA = 2,
+ MB_STA_ROLE_PCP = 3,
+ MB_STA_ROLE_NON_PCP_NON_AP = 4
+};
+
+#define MB_CTRL_ROLE_MASK (BIT(0) | BIT(1) | BIT(2))
+#define MB_CTRL_ROLE(ctrl) ((u8) ((ctrl) & MB_CTRL_ROLE_MASK))
+#define MB_CTRL_STA_MAC_PRESENT ((u8) (BIT(3)))
+#define MB_CTRL_PAIRWISE_CIPHER_SUITE_PRESENT ((u8) (BIT(4)))
+
+enum mb_band_id {
+ MB_BAND_ID_WIFI_2_4GHZ = 2, /* 2.4 GHz */
+ MB_BAND_ID_WIFI_5GHZ = 4, /* 4.9 and 5 GHz */
+ MB_BAND_ID_WIFI_60GHZ = 5, /* 60 GHz */
+};
+
+#define MB_CONNECTION_CAPABILITY_AP ((u8) (BIT(0)))
+#define MB_CONNECTION_CAPABILITY_PCP ((u8) (BIT(1)))
+#define MB_CONNECTION_CAPABILITY_DLS ((u8) (BIT(2)))
+#define MB_CONNECTION_CAPABILITY_TDLS ((u8) (BIT(3)))
+#define MB_CONNECTION_CAPABILITY_IBSS ((u8) (BIT(4)))
+
+/* IEEE Std 802.11ad-2014 - FST Action field */
+enum fst_action {
+ FST_ACTION_SETUP_REQUEST = 0,
+ FST_ACTION_SETUP_RESPONSE = 1,
+ FST_ACTION_TEAR_DOWN = 2,
+ FST_ACTION_ACK_REQUEST = 3,
+ FST_ACTION_ACK_RESPONSE = 4,
+ FST_ACTION_ON_CHANNEL_TUNNEL = 5,
+};
+
+/* IEEE Std 802.11ac-2013, Annex C - dot11PHYType */
+enum phy_type {
+ PHY_TYPE_UNSPECIFIED = 0,
+ PHY_TYPE_FHSS = 1,
+ PHY_TYPE_DSSS = 2,
+ PHY_TYPE_IRBASEBAND = 3,
+ PHY_TYPE_OFDM = 4,
+ PHY_TYPE_HRDSSS = 5,
+ PHY_TYPE_ERP = 6,
+ PHY_TYPE_HT = 7,
+ PHY_TYPE_DMG = 8,
+ PHY_TYPE_VHT = 9,
+};
+
+/* IEEE P802.11-REVmd/D3.0, 9.4.2.36 - Neighbor Report element */
+/* BSSID Information Field */
+#define NEI_REP_BSSID_INFO_AP_NOT_REACH BIT(0)
+#define NEI_REP_BSSID_INFO_AP_UNKNOWN_REACH BIT(1)
+#define NEI_REP_BSSID_INFO_AP_REACHABLE (BIT(0) | BIT(1))
+#define NEI_REP_BSSID_INFO_SECURITY BIT(2)
+#define NEI_REP_BSSID_INFO_KEY_SCOPE BIT(3)
+#define NEI_REP_BSSID_INFO_SPECTRUM_MGMT BIT(4)
+#define NEI_REP_BSSID_INFO_QOS BIT(5)
+#define NEI_REP_BSSID_INFO_APSD BIT(6)
+#define NEI_REP_BSSID_INFO_RM BIT(7)
+#define NEI_REP_BSSID_INFO_DELAYED_BA BIT(8)
+#define NEI_REP_BSSID_INFO_IMM_BA BIT(9)
+#define NEI_REP_BSSID_INFO_MOBILITY_DOMAIN BIT(10)
+#define NEI_REP_BSSID_INFO_HT BIT(11)
+#define NEI_REP_BSSID_INFO_VHT BIT(12)
+#define NEI_REP_BSSID_INFO_FTM BIT(13)
+#define NEI_REP_BSSID_INFO_HE BIT(14)
+
+/*
+ * IEEE P802.11-REVmc/D5.0 Table 9-152 - HT/VHT Operation Information
+ * subfields.
+ * Note: These definitions are not the same as other CHANWIDTH_*.
+ */
+enum nr_chan_width {
+ NR_CHAN_WIDTH_20 = 0,
+ NR_CHAN_WIDTH_40 = 1,
+ NR_CHAN_WIDTH_80 = 2,
+ NR_CHAN_WIDTH_160 = 3,
+ NR_CHAN_WIDTH_80P80 = 4,
+};
+
+struct ieee80211_he_capabilities {
+ u8 he_mac_capab_info[6];
+ u8 he_phy_capab_info[11];
+ /* Followed by 4, 8, or 12 octets of Supported HE-MCS And NSS Set field
+ * and optional variable length PPE Thresholds field. */
+ u8 optional[37];
+} STRUCT_PACKED;
+#define IEEE80211_HE_CAPAB_MIN_LEN (6 + 11)
+
+struct ieee80211_he_operation {
+ le32 he_oper_params; /* HE Operation Parameters[3] and
+ * BSS Color Information[1] */
+ le16 he_mcs_nss_set;
+ /* Followed by conditional VHT Operation Information (3 octets),
+ * Max Co-Hosted BSSID Indicator subfield (1 octet), and/or 6 GHz
+ * Operation Information subfield (5 octets). */
+} STRUCT_PACKED;
+
+/* IEEE P802.11ax/D6.0, Figure 9-787k - 6 GHz Operation Information field */
+struct ieee80211_he_6ghz_oper_info {
+ u8 primary_chan;
+ u8 control;
+ u8 chan_center_freq_seg0;
+ u8 chan_center_freq_seg1;
+ u8 min_rate;
+} STRUCT_PACKED;
+
+#define HE_6GHZ_OPER_INFO_CTRL_CHAN_WIDTH_MASK (BIT(0) | BIT(1))
+#define HE_6GHZ_OPER_INFO_CTRL_DUP_BEACON BIT(2)
+
+/* IEEE P802.11ax/D6.0, 9.4.2.261 HE 6 GHz Band Capabilities element */
+struct ieee80211_he_6ghz_band_cap {
+ /* Minimum MPDU Start Spacing B0..B2
+ * Maximum A-MPDU Length Exponent B3..B5
+ * Maximum MPDU Length B6..B7 */
+ le16 capab;
+} STRUCT_PACKED;
+
+#define HE_6GHZ_BAND_CAP_MIN_MPDU_START (BIT(0) | BIT(1) | BIT(2))
+#define HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_16K BIT(3)
+#define HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_32K BIT(4)
+#define HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_64K (BIT(3) | BIT(4))
+#define HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_128K BIT(5)
+#define HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_256K (BIT(3) | BIT(5))
+#define HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_512K (BIT(4) | BIT(5))
+#define HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_1024K (BIT(3) | BIT(4) | BIT(5))
+#define HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_MASK (BIT(3) | BIT(4) | BIT(5))
+#define HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_SHIFT 3
+#define HE_6GHZ_BAND_CAP_MAX_MPDU_LEN_7991 BIT(6)
+#define HE_6GHZ_BAND_CAP_MAX_MPDU_LEN_11454 BIT(7)
+#define HE_6GHZ_BAND_CAP_MAX_MPDU_LEN_MASK (BIT(6) | BIT(7))
+#define HE_6GHZ_BAND_CAP_MAX_MPDU_LEN_SHIFT 6
+#define HE_6GHZ_BAND_CAP_SMPS_MASK (BIT(9) | BIT(10))
+#define HE_6GHZ_BAND_CAP_SMPS_STATIC 0
+#define HE_6GHZ_BAND_CAP_SMPS_DYNAMIC BIT(9)
+#define HE_6GHZ_BAND_CAP_SMPS_DISABLED (BIT(9) | BIT(10))
+#define HE_6GHZ_BAND_CAP_RD_RESPONDER BIT(11)
+#define HE_6GHZ_BAND_CAP_RX_ANTPAT_CONS BIT(12)
+#define HE_6GHZ_BAND_CAP_TX_ANTPAT_CONS BIT(13)
+
+/*
+ * IEEE P802.11ax/D4.0, 9.4.2.246 Spatial Reuse Parameter Set element
+ */
+struct ieee80211_spatial_reuse {
+ u8 sr_ctrl; /* SR Control */
+ /* Up to 19 octets of parameters:
+ * Non-SRG OBSS PD Max Offset[0 or 1]
+ * SRG OBSS PD Min Offset[0 or 1]
+ * SRG OBSS PD Max Offset[0 or 1]
+ * SRG BSS Color Bitmap[0 or 8]
+ * SRG Partial BSSID Bitmap[0 or 8]
+ */
+ u8 params[19];
+} STRUCT_PACKED;
+
+/* HE Capabilities Information defines */
+
+#define HE_MACCAP_TWT_RESPONDER ((u8) BIT(2))
+
+#define HE_PHYCAP_CHANNEL_WIDTH_SET_IDX 0
+#define HE_PHYCAP_CHANNEL_WIDTH_MASK ((u8) (BIT(1) | BIT(2) | \
+ BIT(3) | BIT(4)))
+#define HE_PHYCAP_CHANNEL_WIDTH_SET_40MHZ_IN_2G ((u8) BIT(1))
+#define HE_PHYCAP_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G ((u8) BIT(2))
+#define HE_PHYCAP_CHANNEL_WIDTH_SET_160MHZ_IN_5G ((u8) BIT(3))
+#define HE_PHYCAP_CHANNEL_WIDTH_SET_80PLUS80MHZ_IN_5G ((u8) BIT(4))
+
+#define HE_PHYCAP_SU_BEAMFORMER_CAPAB_IDX 3
+#define HE_PHYCAP_SU_BEAMFORMER_CAPAB ((u8) BIT(7))
+#define HE_PHYCAP_SU_BEAMFORMEE_CAPAB_IDX 4
+#define HE_PHYCAP_SU_BEAMFORMEE_CAPAB ((u8) BIT(0))
+#define HE_PHYCAP_MU_BEAMFORMER_CAPAB_IDX 4
+#define HE_PHYCAP_MU_BEAMFORMER_CAPAB ((u8) BIT(1))
+
+#define HE_PHYCAP_PPE_THRESHOLD_PRESENT_IDX 6
+#define HE_PHYCAP_PPE_THRESHOLD_PRESENT ((u8) BIT(7))
+
+/* HE PPE Threshold define */
+#define HE_PPE_THRES_RU_INDEX_BITMASK_MASK 0xf
+#define HE_PPE_THRES_RU_INDEX_BITMASK_SHIFT 3
+#define HE_PPE_THRES_NSS_MASK 0x7
+
+/* HE Operation defines */
+/* HE Operation Parameters and BSS Color Information fields */
+#define HE_OPERATION_DFLT_PE_DURATION_MASK ((u32) (BIT(0) | BIT(1) | \
+ BIT(2)))
+#define HE_OPERATION_DFLT_PE_DURATION_OFFSET 0
+#define HE_OPERATION_TWT_REQUIRED ((u32) BIT(3))
+#define HE_OPERATION_RTS_THRESHOLD_MASK ((u32) (BIT(4) | BIT(5) | \
+ BIT(6) | BIT(7) | \
+ BIT(8) | BIT(9) | \
+ BIT(10) | BIT(11) | \
+ BIT(12) | BIT(13)))
+#define HE_OPERATION_RTS_THRESHOLD_OFFSET 4
+#define HE_OPERATION_VHT_OPER_INFO ((u32) BIT(14))
+#define HE_OPERATION_COHOSTED_BSS ((u32) BIT(15))
+#define HE_OPERATION_ER_SU_DISABLE ((u32) BIT(16))
+#define HE_OPERATION_6GHZ_OPER_INFO ((u32) BIT(17))
+#define HE_OPERATION_BSS_COLOR_MASK ((u32) (BIT(24) | BIT(25) | \
+ BIT(26) | BIT(27) | \
+ BIT(28) | BIT(29)))
+#define HE_OPERATION_BSS_COLOR_PARTIAL ((u32) BIT(30))
+#define HE_OPERATION_BSS_COLOR_DISABLED ((u32) BIT(31))
+#define HE_OPERATION_BSS_COLOR_OFFSET 24
+
+/* Spatial Reuse defines */
+#define SPATIAL_REUSE_SRP_DISALLOWED BIT(0)
+#define SPATIAL_REUSE_NON_SRG_OBSS_PD_SR_DISALLOWED BIT(1)
+#define SPATIAL_REUSE_NON_SRG_OFFSET_PRESENT BIT(2)
+#define SPATIAL_REUSE_SRG_INFORMATION_PRESENT BIT(3)
+#define SPATIAL_REUSE_HESIGA_SR_VAL15_ALLOWED BIT(4)
+
+struct ieee80211_he_mu_edca_parameter_set {
+ u8 he_qos_info;
+ u8 he_mu_ac_be_param[3];
+ u8 he_mu_ac_bk_param[3];
+ u8 he_mu_ac_vi_param[3];
+ u8 he_mu_ac_vo_param[3];
+} STRUCT_PACKED;
+
+/* HE MU AC parameter record field format */
+/* ACI/AIFSN */
+#define HE_MU_AC_PARAM_ACI_IDX 0
+#define HE_MU_AC_PARAM_AIFSN ((u8) (BIT(0) | BIT(1) | BIT(2) | BIT(3)))
+#define HE_MU_AC_PARAM_ACM ((u8) BIT(4))
+#define HE_MU_AC_PARAM_ACI ((u8) (BIT(5) | BIT(6)))
+/* B7: Reserved */
+
+/* ECWmin/ECWmax */
+#define HE_MU_AC_PARAM_ECW_IDX 1
+#define HE_MU_AC_PARAM_ECWMIN ((u8) (BIT(0) | BIT(1) | BIT(2) | BIT(3)))
+#define HE_MU_AC_PARAM_ECWMAX ((u8) (BIT(4) | BIT(5) | BIT(6) | BIT(7)))
+
+/* MU EDCA Timer */
+#define HE_MU_AC_PARAM_TIMER_IDX 2
+
+/* HE QoS Info field */
+#define HE_QOS_INFO_EDCA_PARAM_SET_COUNT ((u8) (BIT(0) | BIT(1) | \
+ BIT(2) | BIT(3)))
+#define HE_QOS_INFO_Q_ACK ((u8) (BIT(4)))
+#define HE_QOS_INFO_QUEUE_REQUEST ((u8) (BIT(5)))
+#define HE_QOS_INFO_TXOP_REQUEST ((u8) (BIT(6)))
+/* B7: Reserved if sent by an AP; More Data Ack if sent by a non-AP STA */
+#define HE_QOS_INFO_MORE_DATA_ACK ((u8) (BIT(7)))
+
+/*
+ * IEEE Std 802.11-2020 and IEEE Std 802.11ax-2021
+ * 9.4.2.170 Reduced Neighbor Report element
+ */
+#define RNR_HEADER_LEN 2
+#define RNR_TBTT_HEADER_LEN 4
+#define RNR_TBTT_INFO_COUNT(x) (((x) & 0xf) << 4)
+#define RNR_TBTT_INFO_COUNT_MAX 16
+#define RNR_TBTT_INFO_LEN 13
+#define RNR_NEIGHBOR_AP_OFFSET_UNKNOWN 255
+/* Figure 9-632a - BSS Parameters subfield format */
+#define RNR_BSS_PARAM_OCT_RECOMMENDED BIT(0)
+#define RNR_BSS_PARAM_SAME_SSID BIT(1)
+#define RNR_BSS_PARAM_MULTIPLE_BSSID BIT(2)
+#define RNR_BSS_PARAM_TRANSMITTED_BSSID BIT(3)
+#define RNR_BSS_PARAM_MEMBER_CO_LOCATED_ESS BIT(4)
+#define RNR_BSS_PARAM_UNSOLIC_PROBE_RESP_ACTIVE BIT(5)
+#define RNR_BSS_PARAM_CO_LOCATED BIT(6)
+#define RNR_20_MHZ_PSD_MAX_TXPOWER 255 /* dBm */
+
+/* IEEE P802.11ay/D4.0, 9.4.2.251 - EDMG Operation element */
+#define EDMG_BSS_OPERATING_CHANNELS_OFFSET 6
+#define EDMG_OPERATING_CHANNEL_WIDTH_OFFSET 7
+
+/* IEEE P802.11ay/D4.0, 29.3.4 - Channelization */
+enum edmg_channel {
+ EDMG_CHANNEL_9 = 9,
+ EDMG_CHANNEL_10 = 10,
+ EDMG_CHANNEL_11 = 11,
+ EDMG_CHANNEL_12 = 12,
+ EDMG_CHANNEL_13 = 13,
+};
+
+/* Represent CB2 contiguous channels */
+#define EDMG_CHANNEL_9_SUBCHANNELS (BIT(0) | BIT(1)) /* channels 1 and 2 */
+#define EDMG_CHANNEL_10_SUBCHANNELS (BIT(1) | BIT(2)) /* channels 2 and 3 */
+#define EDMG_CHANNEL_11_SUBCHANNELS (BIT(2) | BIT(3)) /* channels 3 and 4 */
+#define EDMG_CHANNEL_12_SUBCHANNELS (BIT(3) | BIT(4)) /* channels 4 and 5 */
+#define EDMG_CHANNEL_13_SUBCHANNELS (BIT(4) | BIT(5)) /* channels 5 and 6 */
+
+/**
+ * enum edmg_bw_config - Allowed channel bandwidth configurations
+ * @EDMG_BW_CONFIG_4: 2.16 GHz
+ * @EDMG_BW_CONFIG_5: 2.16 GHz and 4.32 GHz
+ *
+ * IEEE P802.11ay/D4.0, 9.4.2.251 (EDMG Operation element),
+ * Table 13 (Channel BW Configuration subfield definition)
+ */
+enum edmg_bw_config {
+ EDMG_BW_CONFIG_4 = 4,
+ EDMG_BW_CONFIG_5 = 5,
+};
+
+/* DPP Public Action frame identifiers - OUI_WFA */
+#define DPP_OUI_TYPE 0x1A
+
+/* Robust AV streaming Action field values */
+enum robust_av_streaming_action {
+ ROBUST_AV_SCS_REQ = 0,
+ ROBUST_AV_SCS_RESP = 1,
+ ROBUST_AV_GROUP_MEMBERSHIP_REQ = 2,
+ ROBUST_AV_GROUP_MEMBERSHIP_RESP = 3,
+ ROBUST_AV_MSCS_REQ = 4,
+ ROBUST_AV_MSCS_RESP = 5,
+};
+
+enum scs_request_type {
+ SCS_REQ_ADD = 0,
+ SCS_REQ_REMOVE = 1,
+ SCS_REQ_CHANGE = 2,
+};
+
+/* Optional subelement IDs for MSCS Descriptor element */
+enum mscs_description_subelem {
+ MCSC_SUBELEM_STATUS = 1,
+};
+
+/*
+ * IEEE Std 802.11ai-2016, 9.6.8.36 FILS Discovery frame format,
+ * Figure 9-687b - FILS Discovery Frame Control subfield format
+ */
+#define FD_FRAME_CTL_CAP_PRESENT ((u16) BIT(5))
+#define FD_FRAME_CTL_SHORT_SSID_PRESENT ((u16) BIT(6))
+#define FD_FRAME_CTL_AP_CSN_PRESENT ((u16) BIT(7))
+#define FD_FRAME_CTL_ANO_PRESENT ((u16) BIT(8))
+#define FD_FRAME_CTL_FREQ_SEG1_PRESENT ((u16) BIT(9))
+#define FD_FRAME_CTL_PRI_CHAN_PRESENT ((u16) BIT(10))
+#define FD_FRAME_CTL_RSN_INFO_PRESENT ((u16) BIT(11))
+#define FD_FRAME_CTL_LENGTH_PRESENT ((u16) BIT(12))
+#define FD_FRAME_CTL_MD_PRESENT ((u16) BIT(13))
+
+/*
+ * IEEE Std 802.11ai-2016, 9.6.8.36 FILS Discovery frame format,
+ * Figure 9-687c - FD Capability subfield format
+ */
+#define FD_CAP_ESS BIT(0)
+#define FD_CAP_PRIVACY BIT(1)
+#define FD_CAP_MULTI_BSSID_PRESENT BIT(9)
+
+#define FD_CAP_BSS_CHWIDTH_20 0
+#define FD_CAP_BSS_CHWIDTH_40 1
+#define FD_CAP_BSS_CHWIDTH_80 2
+#define FD_CAP_BSS_CHWIDTH_160_80_80 3
+#define FD_CAP_BSS_CHWIDTH_SHIFT 2
+
+#define FD_CAP_NSS_1 0
+#define FD_CAP_NSS_2 1
+#define FD_CAP_NSS_3 2
+#define FD_CAP_NSS_4 3
+#define FD_CAP_NSS_5_8 4
+#define FD_CAP_NSS_SHIFT 5
+
+#define FD_CAP_PHY_INDEX_HR_DSSS 0
+#define FD_CAP_PHY_INDEX_ERP_OFDM 1
+#define FD_CAP_PHY_INDEX_HT 2
+#define FD_CAP_PHY_INDEX_VHT 3
+#define FD_CAP_PHY_INDEX_HE 4 /* P802.11ax */
+#define FD_CAP_PHY_INDEX_SHIFT 10
+
+/*
+ * IEEE P802.11ax/D8.0 26.17.2.3.2, AP behavior for fast passive scanning
+ */
+#define FD_MAX_INTERVAL_6GHZ 20 /* TUs */
+
+/* Protected Vendor-specific QoS Management Action frame identifiers - WFA */
+#define QM_ACTION_VENDOR_TYPE 0x506f9a1a
+#define QM_ACTION_OUI_TYPE 0x1a
+
+/* QoS Management Action frame OUI subtypes */
+#define QM_DSCP_POLICY_QUERY 0
+#define QM_DSCP_POLICY_REQ 1
+#define QM_DSCP_POLICY_RESP 2
+
+/* QoS Management attributes */
+enum qm_attr_id {
+ QM_ATTR_PORT_RANGE = 1,
+ QM_ATTR_DSCP_POLICY = 2,
+ QM_ATTR_TCLAS = 3,
+ QM_ATTR_DOMAIN_NAME = 4,
+};
+
+/* DSCP Policy attribute - Request Type */
+enum dscp_policy_request_type {
+ DSCP_POLICY_REQ_ADD = 0, /* ADD/UPDATE */
+ DSCP_POLICY_REQ_REMOVE = 1,
+};
+
+/* Request/Response Control field of DSCP Policy Request/Response frame */
+#define DSCP_POLICY_CTRL_MORE BIT(0)
+#define DSCP_POLICY_CTRL_RESET BIT(1)
+
+/* Wi-Fi Alliance Capabilities element - Capabilities field */
+#define WFA_CAPA_QM_DSCP_POLICY BIT(0)
+#define WFA_CAPA_QM_UNSOLIC_DSCP BIT(1)
+
+#endif /* IEEE802_11_DEFS_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/ieee802_1x_defs.h b/ap/app/wpa_supplicant-2.10/src/common/ieee802_1x_defs.h
new file mode 100755
index 0000000..e7acff1
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/ieee802_1x_defs.h
@@ -0,0 +1,86 @@
+/*
+ * IEEE Std 802.1X-2010 definitions
+ * Copyright (c) 2013-2014, Qualcomm Atheros, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef IEEE802_1X_DEFS_H
+#define IEEE802_1X_DEFS_H
+
+#define CS_ID_LEN 8
+#define CS_ID_GCM_AES_128 0x0080020001000001ULL
+#define CS_NAME_GCM_AES_128 "GCM-AES-128"
+#define CS_ID_GCM_AES_256 0x0080c20001000002ULL
+#define CS_NAME_GCM_AES_256 "GCM-AES-256"
+
+enum macsec_policy {
+ /**
+ * Should secure sessions.
+ * This accepts key server's advice to determine whether to secure the
+ * session or not.
+ */
+ SHOULD_SECURE,
+
+ /**
+ * Disabled MACsec - do not secure sessions.
+ */
+ DO_NOT_SECURE,
+
+ /**
+ * Should secure sessions, and try to use encryption.
+ * Like @SHOULD_SECURE, this follows the key server's decision.
+ */
+ SHOULD_ENCRYPT,
+};
+
+
+/* IEEE Std 802.1X-2010 - Table 11-6 - MACsec Capability */
+enum macsec_cap {
+ /**
+ * MACsec is not implemented
+ */
+ MACSEC_CAP_NOT_IMPLEMENTED,
+
+ /**
+ * 'Integrity without confidentiality'
+ */
+ MACSEC_CAP_INTEGRITY,
+
+ /**
+ * 'Integrity without confidentiality' and
+ * 'Integrity and confidentiality' with a confidentiality offset of 0
+ */
+ MACSEC_CAP_INTEG_AND_CONF,
+
+ /**
+ * 'Integrity without confidentiality' and
+ * 'Integrity and confidentiality' with a confidentiality offset of 0,
+ * 30, 50
+ */
+ MACSEC_CAP_INTEG_AND_CONF_0_30_50,
+};
+
+enum validate_frames {
+ Disabled,
+ Checked,
+ Strict,
+};
+
+/* IEEE Std 802.1X-2010 - Table 11-6 - Confidentiality Offset */
+enum confidentiality_offset {
+ CONFIDENTIALITY_NONE = 0,
+ CONFIDENTIALITY_OFFSET_0 = 1,
+ CONFIDENTIALITY_OFFSET_30 = 2,
+ CONFIDENTIALITY_OFFSET_50 = 3,
+};
+
+/* IEEE Std 802.1X-2010 - Table 9-2 */
+#define DEFAULT_PRIO_INFRA_PORT 0x10
+#define DEFAULT_PRIO_PRIMRAY_AP 0x30
+#define DEFAULT_PRIO_SECONDARY_AP 0x50
+#define DEFAULT_PRIO_GROUP_CA_MEMBER 0x70
+#define DEFAULT_PRIO_NOT_KEY_SERVER 0xFF
+
+#endif /* IEEE802_1X_DEFS_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/linux_bridge.h b/ap/app/wpa_supplicant-2.10/src/common/linux_bridge.h
new file mode 100755
index 0000000..84386e6
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/linux_bridge.h
@@ -0,0 +1,39 @@
+/*
+ * Linux bridge configuration kernel interface
+ * Copyright (c) 2016, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef LINUX_BRIDGE_H
+#define LINUX_BRIDGE_H
+
+/* This ioctl is defined in linux/sockios.h */
+
+#ifndef SIOCBRADDBR
+#define SIOCBRADDBR 0x89a0
+#endif
+#ifndef SIOCBRDELBR
+#define SIOCBRDELBR 0x89a1
+#endif
+#ifndef SIOCBRADDIF
+#define SIOCBRADDIF 0x89a2
+#endif
+#ifndef SIOCBRDELIF
+#define SIOCBRDELIF 0x89a3
+#endif
+
+/* This interface is defined in linux/if_bridge.h */
+
+#define BRCTL_GET_VERSION 0
+#define BRCTL_GET_BRIDGES 1
+#define BRCTL_ADD_BRIDGE 2
+#define BRCTL_DEL_BRIDGE 3
+#define BRCTL_ADD_IF 4
+#define BRCTL_DEL_IF 5
+#define BRCTL_GET_BRIDGE_INFO 6
+#define BRCTL_GET_PORT_LIST 7
+#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8
+
+#endif /* LINUX_BRIDGE_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/linux_vlan.h b/ap/app/wpa_supplicant-2.10/src/common/linux_vlan.h
new file mode 100755
index 0000000..8a1dd6e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/linux_vlan.h
@@ -0,0 +1,52 @@
+/*
+ * Linux VLAN configuration kernel interface
+ * Copyright (c) 2016, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef LINUX_VLAN_H
+#define LINUX_VLAN_H
+
+/* This ioctl is defined in linux/sockios.h */
+
+#ifndef SIOCSIFVLAN
+#define SIOCSIFVLAN 0x8983
+#endif /* SIOCSIFVLAN */
+
+/* This interface is defined in linux/if_vlan.h */
+
+#define ADD_VLAN_CMD 0
+#define DEL_VLAN_CMD 1
+#define SET_VLAN_INGRESS_PRIORITY_CMD 2
+#define SET_VLAN_EGRESS_PRIORITY_CMD 3
+#define GET_VLAN_INGRESS_PRIORITY_CMD 4
+#define GET_VLAN_EGRESS_PRIORITY_CMD 5
+#define SET_VLAN_NAME_TYPE_CMD 6
+#define SET_VLAN_FLAG_CMD 7
+#define GET_VLAN_REALDEV_NAME_CMD 8
+#define GET_VLAN_VID_CMD 9
+
+#define VLAN_NAME_TYPE_PLUS_VID 0
+#define VLAN_NAME_TYPE_RAW_PLUS_VID 1
+#define VLAN_NAME_TYPE_PLUS_VID_NO_PAD 2
+#define VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD 3
+
+struct vlan_ioctl_args {
+ int cmd;
+ char device1[24];
+
+ union {
+ char device2[24];
+ int VID;
+ unsigned int skb_priority;
+ unsigned int name_type;
+ unsigned int bind_type;
+ unsigned int flag;
+ } u;
+
+ short vlan_qos;
+};
+
+#endif /* LINUX_VLAN_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/ocv.h b/ap/app/wpa_supplicant-2.10/src/common/ocv.h
new file mode 100755
index 0000000..7fa4522
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/ocv.h
@@ -0,0 +1,47 @@
+/*
+ * Operating Channel Validation (OCV)
+ * Copyright (c) 2018, Mathy Vanhoef
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef OCV_H
+#define OCV_H
+
+struct wpa_channel_info;
+
+struct oci_info {
+ /* Values in the OCI element */
+ u8 op_class;
+ u8 channel;
+ u8 seg1_idx;
+
+ /* Derived values for easier verification */
+ int freq;
+ int sec_channel;
+ int chanwidth;
+};
+
+#define OCV_OCI_LEN 3
+#define OCV_OCI_EXTENDED_LEN (3 + OCV_OCI_LEN)
+#define OCV_OCI_KDE_LEN (2 + RSN_SELECTOR_LEN + OCV_OCI_LEN)
+
+enum oci_verify_result {
+ OCI_SUCCESS, OCI_NOT_FOUND, OCI_INVALID_LENGTH, OCI_PARSE_ERROR,
+ OCI_PRIMARY_FREQ_MISMATCH, OCI_CHANNEL_WIDTH_MISMATCH,
+ OCI_SECONDARY_FREQ_MISMATCH, OCI_SEG_1_INDEX_MISMATCH
+};
+
+extern char ocv_errorstr[256];
+
+int ocv_derive_all_parameters(struct oci_info *oci);
+int ocv_insert_oci(struct wpa_channel_info *ci, u8 **argpos);
+int ocv_insert_oci_kde(struct wpa_channel_info *ci, u8 **argpos);
+int ocv_insert_extended_oci(struct wpa_channel_info *ci, u8 *pos);
+enum oci_verify_result
+ocv_verify_tx_params(const u8 *oci_ie, size_t oci_ie_len,
+ struct wpa_channel_info *ci, int tx_chanwidth,
+ int tx_seg1_idx);
+
+#endif /* OCV_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/privsep_commands.h b/ap/app/wpa_supplicant-2.10/src/common/privsep_commands.h
new file mode 100755
index 0000000..d2c4bbd
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/privsep_commands.h
@@ -0,0 +1,112 @@
+/*
+ * WPA Supplicant - privilege separation commands
+ * Copyright (c) 2007-2009, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef PRIVSEP_COMMANDS_H
+#define PRIVSEP_COMMANDS_H
+
+#include "drivers/driver.h"
+#include "common/ieee802_11_defs.h"
+
+enum privsep_cmd {
+ PRIVSEP_CMD_REGISTER,
+ PRIVSEP_CMD_UNREGISTER,
+ PRIVSEP_CMD_SCAN,
+ PRIVSEP_CMD_GET_SCAN_RESULTS,
+ PRIVSEP_CMD_ASSOCIATE,
+ PRIVSEP_CMD_GET_BSSID,
+ PRIVSEP_CMD_GET_SSID,
+ PRIVSEP_CMD_SET_KEY,
+ PRIVSEP_CMD_GET_CAPA,
+ PRIVSEP_CMD_L2_REGISTER,
+ PRIVSEP_CMD_L2_UNREGISTER,
+ PRIVSEP_CMD_L2_NOTIFY_AUTH_START,
+ PRIVSEP_CMD_L2_SEND,
+ PRIVSEP_CMD_SET_COUNTRY,
+ PRIVSEP_CMD_AUTHENTICATE,
+};
+
+#define PRIVSEP_MAX_SCAN_FREQS 50
+
+struct privsep_cmd_scan {
+ unsigned int num_ssids;
+ u8 ssids[WPAS_MAX_SCAN_SSIDS][32];
+ u8 ssid_lens[WPAS_MAX_SCAN_SSIDS];
+ unsigned int num_freqs;
+ u16 freqs[PRIVSEP_MAX_SCAN_FREQS];
+};
+
+struct privsep_cmd_authenticate {
+ int freq;
+ u8 bssid[ETH_ALEN];
+ u8 ssid[SSID_MAX_LEN];
+ size_t ssid_len;
+ int auth_alg;
+ size_t ie_len;
+ u8 wep_key[4][16];
+ size_t wep_key_len[4];
+ int wep_tx_keyidx;
+ int local_state_change;
+ int p2p;
+ size_t auth_data_len;
+ /* followed by ie_len bytes of ie */
+ /* followed by auth_data_len bytes of auth_data */
+};
+
+struct privsep_cmd_associate {
+ u8 bssid[ETH_ALEN];
+ u8 ssid[SSID_MAX_LEN];
+ size_t ssid_len;
+ int hwmode;
+ int freq;
+ int channel;
+ int pairwise_suite;
+ int group_suite;
+ int key_mgmt_suite;
+ int auth_alg;
+ int mode;
+ size_t wpa_ie_len;
+ /* followed by wpa_ie_len bytes of wpa_ie */
+};
+
+struct privsep_cmd_set_key {
+ int alg;
+ u8 addr[ETH_ALEN];
+ int key_idx;
+ int set_tx;
+ u8 seq[8];
+ size_t seq_len;
+ u8 key[32];
+ size_t key_len;
+ enum key_flag key_flag;
+};
+
+enum privsep_event {
+ PRIVSEP_EVENT_SCAN_RESULTS,
+ PRIVSEP_EVENT_ASSOC,
+ PRIVSEP_EVENT_DISASSOC,
+ PRIVSEP_EVENT_ASSOCINFO,
+ PRIVSEP_EVENT_MICHAEL_MIC_FAILURE,
+ PRIVSEP_EVENT_INTERFACE_STATUS,
+ PRIVSEP_EVENT_PMKID_CANDIDATE,
+ PRIVSEP_EVENT_FT_RESPONSE,
+ PRIVSEP_EVENT_RX_EAPOL,
+ PRIVSEP_EVENT_SCAN_STARTED,
+ PRIVSEP_EVENT_AUTH,
+};
+
+struct privsep_event_auth {
+ u8 peer[ETH_ALEN];
+ u8 bssid[ETH_ALEN];
+ u16 auth_type;
+ u16 auth_transaction;
+ u16 status_code;
+ size_t ies_len;
+ /* followed by ies_len bytes of ies */
+};
+
+#endif /* PRIVSEP_COMMANDS_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/ptksa_cache.h b/ap/app/wpa_supplicant-2.10/src/common/ptksa_cache.h
new file mode 100755
index 0000000..28ef291
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/ptksa_cache.h
@@ -0,0 +1,79 @@
+/*
+ * RSN PTKSA cache interface
+ *
+ * Copyright (C) 2019 Intel Corporation
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef PTKSA_CACHE_H
+#define PTKSA_CACHE_H
+
+#include "wpa_common.h"
+#include "defs.h"
+#include "list.h"
+
+/**
+ * struct ptksa_cache_entry - PTKSA cache entry
+ */
+struct ptksa_cache_entry {
+ struct dl_list list;
+ struct wpa_ptk ptk;
+ os_time_t expiration;
+ u32 cipher;
+ u8 addr[ETH_ALEN];
+};
+
+#ifdef CONFIG_PTKSA_CACHE
+
+struct ptksa_cache;
+
+struct ptksa_cache * ptksa_cache_init(void);
+void ptksa_cache_deinit(struct ptksa_cache *ptksa);
+struct ptksa_cache_entry * ptksa_cache_get(struct ptksa_cache *ptksa,
+ const u8 *addr, u32 cipher);
+int ptksa_cache_list(struct ptksa_cache *ptksa, char *buf, size_t len);
+struct ptksa_cache_entry * ptksa_cache_add(struct ptksa_cache *ptksa,
+ const u8 *addr, u32 cipher,
+ u32 life_time,
+ const struct wpa_ptk *ptk);
+void ptksa_cache_flush(struct ptksa_cache *ptksa, const u8 *addr, u32 cipher);
+
+#else /* CONFIG_PTKSA_CACHE */
+
+static inline struct ptksa_cache * ptksa_cache_init(void)
+{
+ return (struct ptksa_cache *) 1;
+}
+
+static inline void ptksa_cache_deinit(struct ptksa_cache *ptksa)
+{
+}
+
+static inline struct ptksa_cache_entry *
+ptksa_cache_get(struct ptksa_cache *ptksa, const u8 *addr, u32 cipher)
+{
+ return NULL;
+}
+
+static inline int ptksa_cache_list(struct ptksa_cache *ptksa,
+ char *buf, size_t len)
+{
+ return -1;
+}
+
+static inline struct ptksa_cache_entry *
+ptksa_cache_add(struct ptksa_cache *ptksa, const u8 *addr, u32 cipher,
+ u32 life_time, const struct wpa_ptk *ptk)
+{
+ return NULL;
+}
+
+static inline void ptksa_cache_flush(struct ptksa_cache *ptksa,
+ const u8 *addr, u32 cipher)
+{
+}
+
+#endif /* CONFIG_PTKSA_CACHE */
+#endif /* PTKSA_CACHE_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/qca-vendor-attr.h b/ap/app/wpa_supplicant-2.10/src/common/qca-vendor-attr.h
new file mode 100755
index 0000000..6f51803
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/qca-vendor-attr.h
@@ -0,0 +1,28 @@
+/*
+ * Qualcomm Atheros vendor specific attribute definitions
+ * Copyright (c) 2014, Qualcomm Atheros, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef QCA_VENDOR_ATTR_H
+#define QCA_VENDOR_ATTR_H
+
+/*
+ * This file defines some of the attributes used with Qualcomm Atheros OUI
+ * 00:13:74 in a way that is not suitable for qca-vendor.h, e.g., due to
+ * compiler dependencies.
+ */
+
+struct qca_avoid_freq_range {
+ u32 start_freq;
+ u32 end_freq;
+} __attribute__ ((packed));
+
+struct qca_avoid_freq_list {
+ u32 count;
+ struct qca_avoid_freq_range range[0];
+} __attribute__ ((packed));
+
+#endif /* QCA_VENDOR_ATTR_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/qca-vendor.h b/ap/app/wpa_supplicant-2.10/src/common/qca-vendor.h
new file mode 100755
index 0000000..b77e299
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/qca-vendor.h
@@ -0,0 +1,11847 @@
+/*
+ * Qualcomm Atheros OUI and vendor specific assignments
+ * Copyright (c) 2014-2017, Qualcomm Atheros, Inc.
+ * Copyright (c) 2018-2020, The Linux Foundation
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef QCA_VENDOR_H
+#define QCA_VENDOR_H
+
+/*
+ * This file is a registry of identifier assignments from the Qualcomm Atheros
+ * OUI 00:13:74 for purposes other than MAC address assignment. New identifiers
+ * can be assigned through normal review process for changes to the upstream
+ * hostap.git repository.
+ */
+
+#define OUI_QCA 0x001374
+
+#ifndef BIT
+#define BIT(x) (1U << (x))
+#endif
+
+/**
+ * enum qca_radiotap_vendor_ids - QCA radiotap vendor namespace IDs
+ */
+enum qca_radiotap_vendor_ids {
+ QCA_RADIOTAP_VID_WLANTEST = 0,
+};
+
+/**
+ * enum qca_nl80211_vendor_subcmds - QCA nl80211 vendor command identifiers
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_UNSPEC: Reserved value 0
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_TEST: Test command/event
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_ROAMING: Set roaming policy for drivers that use
+ * internal BSS-selection. This command uses
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY to specify the new roaming policy
+ * for the current connection (i.e., changes policy set by the nl80211
+ * Connect command). @QCA_WLAN_VENDOR_ATTR_MAC_ADDR may optionally be
+ * included to indicate which BSS to use in case roaming is disabled.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY: Recommendation of frequency
+ * ranges to avoid to reduce issues due to interference or internal
+ * co-existence information in the driver. These frequencies aim to
+ * minimize the traffic but not to totally avoid the traffic. That said
+ * for a P2P use case, these frequencies are allowed for the P2P
+ * discovery/negotiation but avoid the group to get formed on these
+ * frequencies. The event data structure is defined in
+ * struct qca_avoid_freq_list.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY: Command to check driver support
+ * for DFS offloading.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_NAN: NAN command/event which is used to pass
+ * NAN Request/Response and NAN Indication messages. These messages are
+ * interpreted between the framework and the firmware component. While
+ * sending the command from userspace to the driver, payload is not
+ * encapsulated inside any attribute. Attribute QCA_WLAN_VENDOR_ATTR_NAN
+ * is used when receiving vendor events in userspace from the driver.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY: Set key operation that can be
+ * used to configure PMK to the driver even when not connected. This can
+ * be used to request offloading of key management operations. Only used
+ * if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH: An extended version of
+ * NL80211_CMD_ROAM event with optional attributes including information
+ * from offloaded key management operation. Uses
+ * enum qca_wlan_vendor_attr_roam_auth attributes. Only used
+ * if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DO_ACS: ACS command/event which is used to
+ * invoke the ACS function in device and pass selected channels to
+ * hostapd. Uses enum qca_wlan_vendor_attr_acs_offload attributes.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES: Command to get the features
+ * supported by the driver. enum qca_wlan_vendor_features defines
+ * the possible features.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED: Event used by driver,
+ * which supports DFS offloading, to indicate a channel availability check
+ * start.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED: Event used by driver,
+ * which supports DFS offloading, to indicate a channel availability check
+ * completion.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED: Event used by driver,
+ * which supports DFS offloading, to indicate that the channel availability
+ * check aborted, no change to the channel status.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED: Event used by
+ * driver, which supports DFS offloading, to indicate that the
+ * Non-Occupancy Period for this channel is over, channel becomes usable.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED: Event used by driver,
+ * which supports DFS offloading, to indicate a radar pattern has been
+ * detected. The channel is now unusable.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO: Get information from the driver.
+ * Attributes defined in enum qca_wlan_vendor_attr_get_wifi_info.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET: Get the feature bitmap
+ * based on enum wifi_logger_supported_features. Attributes defined in
+ * enum qca_wlan_vendor_attr_get_logger_features.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_RING_DATA: Get the ring data from a particular
+ * logger ring, QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_RING_ID is passed as the
+ * attribute for this command. Attributes defined in
+ * enum qca_wlan_vendor_attr_wifi_logger_start.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_CAPABILITIES: Get the supported TDLS
+ * capabilities of the driver, parameters includes the attributes defined
+ * in enum qca_wlan_vendor_attr_tdls_get_capabilities.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_OFFLOADED_PACKETS: Vendor command used to offload
+ * sending of certain periodic IP packet to firmware, attributes defined in
+ * enum qca_wlan_vendor_attr_offloaded_packets.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI: Command used to configure RSSI
+ * monitoring, defines min and max RSSI which are configured for RSSI
+ * monitoring. Also used to notify the RSSI breach and provides the BSSID
+ * and RSSI value that was breached. Attributes defined in
+ * enum qca_wlan_vendor_attr_rssi_monitoring.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_NDP: Command used for performing various NAN
+ * Data Path (NDP) related operations, attributes defined in
+ * enum qca_wlan_vendor_attr_ndp_params.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_ND_OFFLOAD: Command used to enable/disable
+ * Neighbour Discovery offload, attributes defined in
+ * enum qca_wlan_vendor_attr_nd_offload.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_PACKET_FILTER: Used to set/get the various
+ * configuration parameter for BPF packet filter, attributes defined in
+ * enum qca_wlan_vendor_attr_packet_filter.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_BUS_SIZE: Gets the driver-firmware
+ * maximum supported size, attributes defined in
+ * enum qca_wlan_vendor_drv_info.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_WAKE_REASON_STATS: Command to get various
+ * data about wake reasons and datapath IP statistics, attributes defined
+ * in enum qca_wlan_vendor_attr_wake_stats.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG: Command used to set configuration
+ * for IEEE 802.11 communicating outside the context of a basic service
+ * set, called OCB command. Uses the attributes defines in
+ * enum qca_wlan_vendor_attr_ocb_set_config.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME: Command used to set OCB
+ * UTC time. Use the attributes defines in
+ * enum qca_wlan_vendor_attr_ocb_set_utc_time.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT: Command used to start
+ * sending OCB timing advert frames. Uses the attributes defines in
+ * enum qca_wlan_vendor_attr_ocb_start_timing_advert.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT: Command used to stop
+ * OCB timing advert. Uses the attributes defines in
+ * enum qca_wlan_vendor_attr_ocb_stop_timing_advert.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER: Command used to get TSF
+ * timer value. Uses the attributes defines in
+ * enum qca_wlan_vendor_attr_ocb_get_tsf_resp.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES: Command/event to update the
+ * link properties of the respective interface. As an event, is used
+ * to notify the connected station's status. The attributes for this
+ * command are defined in enum qca_wlan_vendor_attr_link_properties.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SETBAND: Command to configure the enabled band(s)
+ * to the driver. This command sets the band(s) through either the
+ * attribute QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE or
+ * QCA_WLAN_VENDOR_ATTR_SETBAND_MASK (or both).
+ * QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE refers enum qca_set_band as unsigned
+ * integer values and QCA_WLAN_VENDOR_ATTR_SETBAND_MASK refers it as 32
+ * bit unsigned bitmask values. The allowed values for
+ * QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE are limited to QCA_SETBAND_AUTO,
+ * QCA_SETBAND_5G, and QCA_SETBAND_2G. Other values/bitmasks are valid for
+ * QCA_WLAN_VENDOR_ATTR_SETBAND_MASK. The attribute
+ * QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE is deprecated and the recommendation
+ * is to use the QCA_WLAN_VENDOR_ATTR_SETBAND_MASK. If the both attributes
+ * are included for backwards compatibility, the configurations through
+ * QCA_WLAN_VENDOR_ATTR_SETBAND_MASK will take the precedence with drivers
+ * that support both attributes.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY: This command is used to configure
+ * DFS policy and channel hint for ACS operation. This command uses the
+ * attributes defined in enum qca_wlan_vendor_attr_acs_config and
+ * enum qca_acs_dfs_mode.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START: Command used to
+ * start the P2P Listen offload function in device and pass the listen
+ * channel, period, interval, count, device types, and vendor specific
+ * information elements to the device driver and firmware.
+ * Uses the attributes defines in
+ * enum qca_wlan_vendor_attr_p2p_listen_offload.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP: Command/event used to
+ * indicate stop request/response of the P2P Listen offload function in
+ * device. As an event, it indicates either the feature stopped after it
+ * was already running or feature has actually failed to start. Uses the
+ * attributes defines in enum qca_wlan_vendor_attr_p2p_listen_offload.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH: After AP starts
+ * beaconing, this sub command provides the driver, the frequencies on the
+ * 5 GHz band to check for any radar activity. Driver selects one channel
+ * from this priority list provided through
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST and starts
+ * to check for radar activity on it. If no radar activity is detected
+ * during the channel availability check period, driver internally switches
+ * to the selected frequency of operation. If the frequency is zero, driver
+ * internally selects a channel. The status of this conditional switch is
+ * indicated through an event using the same sub command through
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS. Attributes are
+ * listed in qca_wlan_vendor_attr_sap_conditional_chan_switch.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND: Set GPIO pins. This uses the
+ * attributes defined in enum qca_wlan_gpio_attr.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY: Fetch hardware capabilities.
+ * This uses @QCA_WLAN_VENDOR_ATTR_GET_HW_CAPABILITY to indicate which
+ * capabilities are to be fetched and other
+ * enum qca_wlan_vendor_attr_get_hw_capability attributes to return the
+ * requested capabilities.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT: Link layer statistics extension.
+ * enum qca_wlan_vendor_attr_ll_stats_ext attributes are used with this
+ * command and event.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA: Get capabilities for
+ * indoor location features. Capabilities are reported in
+ * QCA_WLAN_VENDOR_ATTR_LOC_CAPA.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION: Start an FTM
+ * (fine timing measurement) session with one or more peers.
+ * Specify Session cookie in QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE and
+ * peer information in QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS.
+ * On success, 0 or more QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT
+ * events will be reported, followed by
+ * QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE event to indicate
+ * end of session.
+ * Refer to IEEE P802.11-REVmc/D7.0, 11.24.6
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_FTM_ABORT_SESSION: Abort a running session.
+ * A QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE will be reported with
+ * status code indicating session was aborted.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT: Event with measurement
+ * results for one peer. Results are reported in
+ * QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE: Event triggered when
+ * FTM session is finished, either successfully or aborted by
+ * request.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER: Configure FTM responder
+ * mode. QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE specifies whether
+ * to enable or disable the responder. LCI/LCR reports can be
+ * configured with QCA_WLAN_VENDOR_ATTR_FTM_LCI and
+ * QCA_WLAN_VENDOR_ATTR_FTM_LCR. Can be called multiple
+ * times to update the LCI/LCR reports.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS: Perform a standalone AOA (angle of
+ * arrival) measurement with a single peer. Specify peer MAC address in
+ * QCA_WLAN_VENDOR_ATTR_MAC_ADDR and optionally frequency (MHz) in
+ * QCA_WLAN_VENDOR_ATTR_FREQ (if not specified, locate peer in kernel
+ * scan results cache and use the frequency from there).
+ * Also specify measurement type in QCA_WLAN_VENDOR_ATTR_AOA_TYPE.
+ * Measurement result is reported in
+ * QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT event.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_AOA_ABORT_MEAS: Abort an AOA measurement. Specify
+ * peer MAC address in QCA_WLAN_VENDOR_ATTR_MAC_ADDR.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT: Event that reports
+ * the AOA measurement result.
+ * Peer MAC address reported in QCA_WLAN_VENDOR_ATTR_MAC_ADDR.
+ * success/failure status is reported in
+ * QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS.
+ * Measurement data is reported in QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT.
+ * The antenna array(s) used in the measurement are reported in
+ * QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST: Encrypt/decrypt the given
+ * data as per the given parameters.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI: Get antenna RSSI value for a
+ * specific chain.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG: Get low level
+ * configuration for a DMG RF sector. Specify sector index in
+ * QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX, sector type in
+ * QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE and RF modules
+ * to return sector information for in
+ * QCA_WLAN_VENDOR_ATTR_DMG_RF_MODULE_MASK. Returns sector configuration
+ * in QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG. Also return the
+ * exact time where information was captured in
+ * QCA_WLAN_VENDOR_ATTR_TSF.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG: Set low level
+ * configuration for a DMG RF sector. Specify sector index in
+ * QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX, sector type in
+ * QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE and sector configuration
+ * for one or more DMG RF modules in
+ * QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SELECTED_SECTOR: Get selected
+ * DMG RF sector for a station. This is the sector that the HW
+ * will use to communicate with the station. Specify the MAC address
+ * of associated station/AP/PCP in QCA_WLAN_VENDOR_ATTR_MAC_ADDR (not
+ * needed for unassociated station). Specify sector type to return in
+ * QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE. Returns the selected
+ * sector index in QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX.
+ * Also return the exact time where the information was captured
+ * in QCA_WLAN_VENDOR_ATTR_TSF.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR: Set the
+ * selected DMG RF sector for a station. This is the sector that
+ * the HW will use to communicate with the station.
+ * Specify the MAC address of associated station/AP/PCP in
+ * QCA_WLAN_VENDOR_ATTR_MAC_ADDR, the sector type to select in
+ * QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE and the sector index
+ * in QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX.
+ * The selected sector will be locked such that it will not be
+ * modified like it normally does (for example when station
+ * moves around). To unlock the selected sector for a station
+ * pass the special value 0xFFFF in the sector index. To unlock
+ * all connected stations also pass a broadcast MAC address.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS: Configure the TDLS behavior
+ * in the host driver. The different TDLS configurations are defined
+ * by the attributes in enum qca_wlan_vendor_attr_tdls_configuration.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES: Query device IEEE 802.11ax HE
+ * capabilities. The response uses the attributes defined in
+ * enum qca_wlan_vendor_attr_get_he_capabilities.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN: Abort an ongoing vendor scan that was
+ * started with QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN. This command
+ * carries the scan cookie of the corresponding scan request. The scan
+ * cookie is represented by QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS: Set the Specific
+ * Absorption Rate (SAR) power limits. A critical regulation for
+ * FCC compliance, OEMs require methods to set SAR limits on TX
+ * power of WLAN/WWAN. enum qca_vendor_attr_sar_limits
+ * attributes are used with this command.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS: This command/event is used by the
+ * host driver for offloading the implementation of Auto Channel Selection
+ * (ACS) to an external user space entity. This interface is used as the
+ * event from the host driver to the user space entity and also as the
+ * request from the user space entity to the host driver. The event from
+ * the host driver is used by the user space entity as an indication to
+ * start the ACS functionality. The attributes used by this event are
+ * represented by the enum qca_wlan_vendor_attr_external_acs_event.
+ * User space entity uses the same interface to inform the host driver with
+ * selected channels after the ACS operation using the attributes defined
+ * by enum qca_wlan_vendor_attr_external_acs_channels.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE: Vendor event carrying the
+ * requisite information leading to a power save failure. The information
+ * carried as part of this event is represented by the
+ * enum qca_attr_chip_power_save_failure attributes.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET: Start/Stop the NUD statistics
+ * collection. Uses attributes defined in enum qca_attr_nud_stats_set.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET: Get the NUD statistics. These
+ * statistics are represented by the enum qca_attr_nud_stats_get
+ * attributes.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS: Sub-command to fetch
+ * the BSS transition status, whether accept or reject, for a list of
+ * candidate BSSIDs provided by the userspace. This uses the vendor
+ * attributes QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON and
+ * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO. The userspace shall specify
+ * the attributes QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON and an
+ * array of QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID nested in
+ * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO in the request. In the response
+ * the driver shall specify array of
+ * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID and
+ * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_STATUS pairs nested in
+ * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SET_TRACE_LEVEL: Set the trace level for a
+ * specific QCA module. The trace levels are represented by
+ * enum qca_attr_trace_level attributes.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT: Set the Beam Refinement
+ * Protocol antenna limit in different modes. See enum
+ * qca_wlan_vendor_attr_brp_ant_limit_mode.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START: Start spectral scan. The scan
+ * parameters are specified by enum qca_wlan_vendor_attr_spectral_scan.
+ * This returns a cookie (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE)
+ * identifying the operation in success case. In failure cases an
+ * error code (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_ERROR_CODE)
+ * describing the reason for the failure is returned.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP: Stop spectral scan. This uses
+ * a cookie (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE) from
+ * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START to identify the scan to
+ * be stopped.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS: Set the active Type Of Service on the
+ * specific interface. This can be used to modify some of the low level
+ * scan parameters (off channel dwell time, home channel time) in the
+ * driver/firmware. These parameters are maintained within the host driver.
+ * This command is valid only when the interface is in the connected state.
+ * These scan parameters shall be reset by the driver/firmware once
+ * disconnected. The attributes used with this command are defined in
+ * enum qca_wlan_vendor_attr_active_tos.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_HANG: Event indicating to the user space that the
+ * driver has detected an internal failure. This event carries the
+ * information indicating the reason that triggered this detection. The
+ * attributes for this command are defined in
+ * enum qca_wlan_vendor_attr_hang.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG: Get the current values
+ * of spectral parameters used. The spectral scan parameters are specified
+ * by enum qca_wlan_vendor_attr_spectral_scan.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS: Get the debug stats
+ * for spectral scan functionality. The debug stats are specified by
+ * enum qca_wlan_vendor_attr_spectral_diag_stats.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO: Get spectral
+ * scan system capabilities. The capabilities are specified
+ * by enum qca_wlan_vendor_attr_spectral_cap.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS: Get the current
+ * status of spectral scan. The status values are specified
+ * by enum qca_wlan_vendor_attr_spectral_scan_status.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING: Sub-command to flush
+ * peer pending packets. Specify the peer MAC address in
+ * QCA_WLAN_VENDOR_ATTR_PEER_ADDR and the access category of the packets
+ * in QCA_WLAN_VENDOR_ATTR_AC. The attributes are listed
+ * in enum qca_wlan_vendor_attr_flush_pending.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO: Get vendor specific Representative
+ * RF Operating Parameter (RROP) information. The attributes for this
+ * information are defined in enum qca_wlan_vendor_attr_rrop_info. This is
+ * intended for use by external Auto Channel Selection applications.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS: Get the Specific Absorption Rate
+ * (SAR) power limits. This is a companion to the command
+ * @QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS and is used to retrieve the
+ * settings currently in use. The attributes returned by this command are
+ * defined by enum qca_vendor_attr_sar_limits.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO: Provides the current behavior of
+ * the WLAN hardware MAC. Also, provides the WLAN netdev interface
+ * information attached to the respective MAC.
+ * This works both as a query (user space asks the current mode) or event
+ * interface (driver advertising the current mode to the user space).
+ * Driver does not trigger this event for temporary hardware mode changes.
+ * Mode changes w.r.t Wi-Fi connection update (VIZ creation / deletion,
+ * channel change, etc.) are updated with this event. Attributes for this
+ * interface are defined in enum qca_wlan_vendor_attr_mac.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SET_QDEPTH_THRESH: Set MSDU queue depth threshold
+ * per peer per TID. Attributes for this command are define in
+ * enum qca_wlan_set_qdepth_thresh_attr.
+ * @QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD: Provides the thermal shutdown action
+ * guide for WLAN driver. Request to suspend of driver and FW if the
+ * temperature is higher than the suspend threshold; resume action is
+ * requested to driver if the temperature is lower than the resume
+ * threshold. In user poll mode, request temperature data by user. For test
+ * purpose, getting thermal shutdown configuration parameters is needed.
+ * Attributes for this interface are defined in
+ * enum qca_wlan_vendor_attr_thermal_cmd.
+ * @QCA_NL80211_VENDOR_SUBCMD_THERMAL_EVENT: Thermal events reported from
+ * driver. Thermal temperature and indication of resume completion are
+ * reported as thermal events. The attributes for this command are defined
+ * in enum qca_wlan_vendor_attr_thermal_event.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION: Sub command to set WiFi
+ * test configuration. Attributes for this command are defined in
+ * enum qca_wlan_vendor_attr_wifi_test_config.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER: This command is used to configure an
+ * RX filter to receive frames from stations that are active on the
+ * operating channel, but not associated with the local device (e.g., STAs
+ * associated with other APs). Filtering is done based on a list of BSSIDs
+ * and STA MAC addresses added by the user. This command is also used to
+ * fetch the statistics of unassociated stations. The attributes used with
+ * this command are defined in enum qca_wlan_vendor_attr_bss_filter.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_NAN_EXT: An extendable version of NAN vendor
+ * command. The earlier command for NAN, QCA_NL80211_VENDOR_SUBCMD_NAN,
+ * carried a payload which was a binary blob of data. The command was not
+ * extendable to send more information. The newer version carries the
+ * legacy blob encapsulated within an attribute and can be extended with
+ * additional vendor attributes that can enhance the NAN command interface.
+ * @QCA_NL80211_VENDOR_SUBCMD_ROAM_SCAN_EVENT: Event to indicate scan triggered
+ * or stopped within driver/firmware in order to initiate roaming. The
+ * attributes used with this event are defined in enum
+ * qca_wlan_vendor_attr_roam_scan. Some drivers may not send these events
+ * in few cases, e.g., if the host processor is sleeping when this event
+ * is generated in firmware.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG: This command is used to
+ * configure parameters per peer to capture Channel Frequency Response
+ * (CFR) and enable Periodic CFR capture. The attributes for this command
+ * are defined in enum qca_wlan_vendor_peer_cfr_capture_attr. This command
+ * can also be used to send CFR data from the driver to userspace when
+ * netlink events are used to send CFR data.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT: Event to indicate changes
+ * in throughput dynamically. The driver estimates the throughput based on
+ * number of packets being transmitted/received per second and indicates
+ * the changes in throughput to user space. Userspace tools can use this
+ * information to configure kernel's TCP parameters in order to achieve
+ * peak throughput. Optionally, the driver will also send guidance on
+ * modifications to kernel's TCP parameters which can be referred by
+ * userspace tools. The attributes used with this event are defined in enum
+ * qca_wlan_vendor_attr_throughput_change.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG: This command is used to set
+ * priorities among different types of traffic during coex scenarios.
+ * Current supported prioritization is among WLAN/BT/ZIGBEE with different
+ * profiles mentioned in enum qca_coex_config_profiles. The associated
+ * attributes used with this command are defined in enum
+ * qca_vendor_attr_coex_config.
+ *
+ * Based on the config provided, FW will boost the weight and prioritize
+ * the traffic for that subsystem (WLAN/BT/Zigbee).
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_AKMS: This command is used to query
+ * the supported AKM suite selectorss from the driver. It returns the list
+ * of supported AKMs in the attribute NL80211_ATTR_AKM_SUITES.
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_FW_STATE: This command is used to get firmware
+ * state from the driver. It returns the firmware state in the attribute
+ * QCA_WLAN_VENDOR_ATTR_FW_STATE.
+ * @QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH: This vendor subcommand
+ * is used by the driver to flush per-peer cached statistics to user space
+ * application. This interface is used as an event from the driver to
+ * user space application. Attributes for this event are specified in
+ * enum qca_wlan_vendor_attr_peer_stats_cache_params.
+ * QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_DATA attribute is expected to be
+ * sent in the event.
+ * @QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG: This sub command is used to
+ * improve the success rate of Zigbee joining network.
+ * Due to PTA master limitation, Zigbee joining network success rate is
+ * low while WLAN is working. The WLAN driver needs to configure some
+ * parameters including Zigbee state and specific WLAN periods to enhance
+ * PTA master. All these parameters are delivered by the attributes
+ * defined in enum qca_mpta_helper_vendor_attr.
+ * @QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING: This sub command is used to
+ * implement Beacon frame reporting feature.
+ *
+ * Userspace can request the driver/firmware to periodically report
+ * received Beacon frames whose BSSID is same as the current connected
+ * BSS's MAC address.
+ *
+ * In case the STA seamlessly (without sending disconnect indication to
+ * userspace) roams to a different BSS, Beacon frame reporting will be
+ * automatically enabled for the Beacon frames whose BSSID is same as the
+ * MAC address of the new BSS. Beacon reporting will be stopped when the
+ * STA is disconnected (when the disconnect indication is sent to
+ * userspace) and need to be explicitly enabled by userspace for next
+ * connection.
+ *
+ * When a Beacon frame matching configured conditions is received, and if
+ * userspace has requested to send asynchronous beacon reports, the
+ * driver/firmware will encapsulate the details of the Beacon frame in an
+ * event and send it to userspace along with updating the BSS information
+ * in cfg80211 scan cache, otherwise driver will only update the cfg80211
+ * scan cache with the information from the received Beacon frame but will
+ * not send any active report to userspace.
+ *
+ * The userspace can request the driver/firmware to stop reporting Beacon
+ * frames. If the driver/firmware is not able to receive Beacon frames due
+ * to other Wi-Fi operations such as off-channel activities, etc., the
+ * driver/firmware will send a pause event to userspace and stop reporting
+ * Beacon frames. Whether the beacon reporting will be automatically
+ * resumed or not by the driver/firmware later will be reported to
+ * userspace using the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES
+ * flag. The beacon reporting shall be resumed for all the cases except
+ * either when userspace sets
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_DO_NOT_RESUME flag in the command
+ * which triggered the current beacon reporting or during any disconnection
+ * case as indicated by setting
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_PAUSE_REASON to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_DISCONNECTED by the
+ * driver.
+ *
+ * After QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_PAUSE event is received
+ * by userspace with QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES
+ * flag not set, the next first
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO event from the driver
+ * shall be considered as un-pause event.
+ *
+ * All the attributes used with this command are defined in
+ * enum qca_wlan_vendor_attr_beacon_reporting_params.
+ * @QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP: In practice, some APs have
+ * interop issues with the DUT. This sub command is used to transfer the
+ * AP info between the driver and user space. This works both as a command
+ * and an event. As a command, it configures the stored list of APs from
+ * user space to firmware; as an event, it indicates the AP info detected
+ * by the firmware to user space for persistent storage. The attributes
+ * defined in enum qca_vendor_attr_interop_issues_ap are used to deliver
+ * the parameters.
+ * @QCA_NL80211_VENDOR_SUBCMD_OEM_DATA: This command/event is used to
+ * send/receive OEM data binary blobs to/from application/service to/from
+ * firmware. The attributes defined in enum
+ * qca_wlan_vendor_attr_oem_data_params are used to deliver the
+ * parameters.
+ * @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT: This command/event is used
+ * to send/receive avoid frequency data using
+ * enum qca_wlan_vendor_attr_avoid_frequency_ext.
+ * This new command is alternative to existing command
+ * QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY since existing command/event
+ * is using stream of bytes instead of structured data using vendor
+ * attributes. User space sends unsafe frequency ranges to the driver using
+ * a nested attribute %QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_RANGE. On
+ * reception of this command, the driver shall check if an interface is
+ * operating on an unsafe frequency and the driver shall try to move to a
+ * safe channel when needed. If the driver is not able to find a safe
+ * channel the interface can keep operating on an unsafe channel with the
+ * TX power limit derived based on internal configurations like
+ * regulatory/SAR rules.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_ADD_STA_NODE: This vendor subcommand is used to
+ * add the STA node details in driver/firmware. Attributes for this event
+ * are specified in enum qca_wlan_vendor_attr_add_sta_node_params.
+ * @QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE: This command is used to set BT
+ * coex chain mode from application/service.
+ * The attributes defined in enum qca_vendor_attr_btc_chain_mode are used
+ * to deliver the parameters.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO: This vendor subcommand is used to
+ * get information of a station from driver to userspace. This command can
+ * be used in both STA and AP modes. For STA mode, it provides information
+ * of the current association when in connected state or the last
+ * association when in disconnected state. For AP mode, only information
+ * of the currently connected stations is available. This command uses
+ * attributes defined in enum qca_wlan_vendor_attr_get_sta_info.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_REQUEST_SAR_LIMITS_EVENT: This acts as an event.
+ * Host drivers can request the user space entity to set the SAR power
+ * limits with this event. Accordingly, the user space entity is expected
+ * to set the SAR power limits. Host drivers can retry this event to the
+ * user space for the SAR power limits configuration from user space. If
+ * the driver does not get the SAR power limits from user space for all
+ * the retried attempts, it can configure a default SAR power limit.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO: This acts as a vendor event and
+ * is used to update the information about the station from the driver to
+ * userspace. Uses attributes from enum
+ * qca_wlan_vendor_attr_update_sta_info.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON: This acts as an event.
+ * The host driver initiates the disconnection for scenarios such as beacon
+ * miss, NUD failure, peer kick out, etc. The disconnection indication
+ * through cfg80211_disconnected() expects the reason codes from enum
+ * ieee80211_reasoncode which does not signify these various reasons why
+ * the driver has triggered the disconnection. This event will be used to
+ * send the driver specific reason codes by the host driver to userspace.
+ * Host drivers should trigger this event and pass the respective reason
+ * code immediately prior to triggering cfg80211_disconnected(). The
+ * attributes used with this event are defined in enum
+ * qca_wlan_vendor_attr_driver_disconnect_reason.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC: This vendor subcommand is used to
+ * add/delete TSPEC for each AC. One command is for one specific AC only.
+ * This command can only be used in STA mode and the STA must be
+ * associated with an AP when the command is issued. Uses attributes
+ * defined in enum qca_wlan_vendor_attr_config_tspec.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT: Vendor subcommand to configure TWT.
+ * Uses attributes defined in enum qca_wlan_vendor_attr_config_twt.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GETBAND: Command to get the enabled band(s) from
+ * the driver. The band configurations obtained are referred through
+ * QCA_WLAN_VENDOR_ATTR_SETBAND_MASK.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_MEDIUM_ASSESS: Vendor subcommand/event for medium
+ * assessment.
+ * Uses attributes defined in enum qca_wlan_vendor_attr_medium_assess.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_UPDATE_SSID: This acts as a vendor event and is
+ * used to update SSID information in hostapd when it is updated in the
+ * driver. Uses the attribute NL80211_ATTR_SSID.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_WIFI_FW_STATS: This vendor subcommand is used by
+ * the driver to send opaque data from the firmware to userspace. The
+ * driver sends an event to userspace whenever such data is received from
+ * the firmware.
+ *
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA is used as the attribute to
+ * send this opaque data for this event.
+ *
+ * The format of the opaque data is specific to the particular firmware
+ * version and there is no guarantee of the format remaining same.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_MBSSID_TX_VDEV_STATUS: This acts as an event.
+ * The host driver selects Tx VDEV, and notifies user. The attributes
+ * used with this event are defined in enum
+ * qca_wlan_vendor_attr_mbssid_tx_vdev_status.
+ * This event contains Tx VDEV group information, other VDEVs
+ * interface index, and status information.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_MULTI_STA_POLICY: Vendor command to
+ * configure the concurrent session policies when multiple STA interfaces
+ * are (getting) active. The attributes used by this command are defined
+ * in enum qca_wlan_vendor_attr_concurrent_sta_policy.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_USABLE_CHANNELS: Userspace can use this command
+ * to query usable channels for different interface types such as STA,
+ * AP, P2P GO, P2P Client, NAN, etc. The driver shall report all usable
+ * channels in the response based on country code, different static
+ * configurations, concurrency combinations, etc. The attributes used
+ * with this command are defined in
+ * enum qca_wlan_vendor_attr_usable_channels.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_RADAR_HISTORY: This vendor subcommand is used
+ * to get DFS radar history from the driver to userspace. The driver
+ * returns QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_ENTRIES attribute with an
+ * array of nested entries.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_MDNS_OFFLOAD: Userspace can use this command to
+ * enable/disable mDNS offload to the firmware. The attributes used with
+ * this command are defined in enum qca_wlan_vendor_attr_mdns_offload.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SET_MONITOR_MODE: This vendor subcommand is used
+ * to set packet monitor mode that aims to send the specified set of TX and
+ * RX frames on the current client interface to an active monitor
+ * interface. If this monitor mode is set, the driver will send the
+ * configured frames, from the interface on which the command is issued, to
+ * an active monitor interface. The attributes used with this command are
+ * defined in enum qca_wlan_vendor_attr_set_monitor_mode.
+ *
+ * Though the monitor mode is configured for the respective
+ * Data/Management/Control frames, it is up to the respective WLAN
+ * driver/firmware/hardware designs to consider the possibility of sending
+ * these frames over the monitor interface. For example, the Control frames
+ * are handled within the hardware and thus passing such frames over the
+ * monitor interface is left to the respective designs.
+ *
+ * Also, this monitor mode is governed to behave accordingly in
+ * suspend/resume states. If the firmware handles any of such frames in
+ * suspend state without waking up the host and if the monitor mode is
+ * configured to notify all such frames, the firmware is expected to resume
+ * the host and forward the respective frames to the monitor interface.
+ * Please note that such a request to get the frames over the monitor
+ * interface will have a definite power implication.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS: This vendor subcommand is used both
+ * as a request to set the driver/firmware with the parameters to trigger
+ * the roaming events, and also used by the driver/firmware to pass on the
+ * various roam events to userspace.
+ * Applicable only for the STA mode. The attributes used with this command
+ * are defined in enum qca_wlan_vendor_attr_roam_events.
+ */
+enum qca_nl80211_vendor_subcmds {
+ QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
+ QCA_NL80211_VENDOR_SUBCMD_TEST = 1,
+ /* subcmds 2..8 not yet allocated */
+ QCA_NL80211_VENDOR_SUBCMD_ROAMING = 9,
+ QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY = 10,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY = 11,
+ QCA_NL80211_VENDOR_SUBCMD_NAN = 12,
+ QCA_NL80211_VENDOR_SUBCMD_STATS_EXT = 13,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET = 14,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET = 15,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR = 16,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_RADIO_RESULTS = 17,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_IFACE_RESULTS = 18,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_PEERS_RESULTS = 19,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_START = 20,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_STOP = 21,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_VALID_CHANNELS = 22,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CAPABILITIES = 23,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CACHED_RESULTS = 24,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_RESULTS_AVAILABLE = 25,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_FULL_SCAN_RESULT = 26,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_EVENT = 27,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_FOUND = 28,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_BSSID_HOTLIST = 29,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_BSSID_HOTLIST = 30,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_SIGNIFICANT_CHANGE = 31,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SIGNIFICANT_CHANGE = 32,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_SIGNIFICANT_CHANGE = 33,
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE = 34,
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE = 35,
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS = 36,
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE = 37,
+ QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES = 38,
+ QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI = 39,
+ QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG = 40,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_LOST = 41,
+ QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX = 42,
+ /* 43..49 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY = 50,
+ QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH = 51,
+ QCA_NL80211_VENDOR_SUBCMD_APFIND = 52,
+ /* 53 - reserved - was used by QCA, but not in use anymore */
+ QCA_NL80211_VENDOR_SUBCMD_DO_ACS = 54,
+ QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES = 55,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED = 56,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED = 57,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED = 58,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED = 59,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED = 60,
+ QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO = 61,
+ QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START = 62,
+ QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_MEMORY_DUMP = 63,
+ QCA_NL80211_VENDOR_SUBCMD_ROAM = 64,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SSID_HOTLIST = 65,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_SSID_HOTLIST = 66,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_SSID_FOUND = 67,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_SSID_LOST = 68,
+ QCA_NL80211_VENDOR_SUBCMD_PNO_SET_LIST = 69,
+ QCA_NL80211_VENDOR_SUBCMD_PNO_SET_PASSPOINT_LIST = 70,
+ QCA_NL80211_VENDOR_SUBCMD_PNO_RESET_PASSPOINT_LIST = 71,
+ QCA_NL80211_VENDOR_SUBCMD_PNO_NETWORK_FOUND = 72,
+ QCA_NL80211_VENDOR_SUBCMD_PNO_PASSPOINT_NETWORK_FOUND = 73,
+ /* Wi-Fi configuration subcommands */
+ QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION = 74,
+ QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION = 75,
+ QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET = 76,
+ QCA_NL80211_VENDOR_SUBCMD_GET_RING_DATA = 77,
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_CAPABILITIES = 78,
+ QCA_NL80211_VENDOR_SUBCMD_OFFLOADED_PACKETS = 79,
+ QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI = 80,
+ QCA_NL80211_VENDOR_SUBCMD_NDP = 81,
+ QCA_NL80211_VENDOR_SUBCMD_ND_OFFLOAD = 82,
+ QCA_NL80211_VENDOR_SUBCMD_PACKET_FILTER = 83,
+ QCA_NL80211_VENDOR_SUBCMD_GET_BUS_SIZE = 84,
+ QCA_NL80211_VENDOR_SUBCMD_GET_WAKE_REASON_STATS = 85,
+ /* 86-90 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_DATA_OFFLOAD = 91,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG = 92,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME = 93,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT = 94,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT = 95,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER = 96,
+ QCA_NL80211_VENDOR_SUBCMD_DCC_GET_STATS = 97,
+ QCA_NL80211_VENDOR_SUBCMD_DCC_CLEAR_STATS = 98,
+ QCA_NL80211_VENDOR_SUBCMD_DCC_UPDATE_NDL = 99,
+ QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT = 100,
+ QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES = 101,
+ QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG = 102,
+ QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST = 103,
+ QCA_NL80211_VENDOR_SUBCMD_SET_PROBABLE_OPER_CHANNEL = 104,
+ QCA_NL80211_VENDOR_SUBCMD_SETBAND = 105,
+ QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN = 106,
+ QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE = 107,
+ QCA_NL80211_VENDOR_SUBCMD_OTA_TEST = 108,
+ QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE = 109,
+ /* 110..114 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB = 115,
+ QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY = 116,
+ /* 117 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_SET_SAP_CONFIG = 118,
+ QCA_NL80211_VENDOR_SUBCMD_TSF = 119,
+ QCA_NL80211_VENDOR_SUBCMD_WISA = 120,
+ /* 121 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START = 122,
+ QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP = 123,
+ QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH = 124,
+ QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND = 125,
+ QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY = 126,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT = 127,
+ /* FTM/indoor location subcommands */
+ QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA = 128,
+ QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION = 129,
+ QCA_NL80211_VENDOR_SUBCMD_FTM_ABORT_SESSION = 130,
+ QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT = 131,
+ QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE = 132,
+ QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER = 133,
+ QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS = 134,
+ QCA_NL80211_VENDOR_SUBCMD_AOA_ABORT_MEAS = 135,
+ QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT = 136,
+ QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST = 137,
+ QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI = 138,
+ /* DMG low level RF sector operations */
+ QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG = 139,
+ QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG = 140,
+ QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SELECTED_SECTOR = 141,
+ QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR = 142,
+ QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS = 143,
+ QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES = 144,
+ QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN = 145,
+ QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS = 146,
+ QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS = 147,
+ QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE = 148,
+ QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET = 149,
+ QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET = 150,
+ QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS = 151,
+ QCA_NL80211_VENDOR_SUBCMD_SET_TRACE_LEVEL = 152,
+ QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT = 153,
+ QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START = 154,
+ QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP = 155,
+ QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS = 156,
+ QCA_NL80211_VENDOR_SUBCMD_HANG = 157,
+ QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG = 158,
+ QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS = 159,
+ QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO = 160,
+ QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS = 161,
+ /* Flush peer pending data */
+ QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING = 162,
+ QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO = 163,
+ QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS = 164,
+ QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO = 165,
+ QCA_NL80211_VENDOR_SUBCMD_SET_QDEPTH_THRESH = 166,
+ /* Thermal shutdown commands to protect wifi chip */
+ QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD = 167,
+ QCA_NL80211_VENDOR_SUBCMD_THERMAL_EVENT = 168,
+ /* Wi-Fi test configuration subcommand */
+ QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION = 169,
+ /* Frame filter operations for other BSSs/unassociated STAs */
+ QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER = 170,
+ QCA_NL80211_VENDOR_SUBCMD_NAN_EXT = 171,
+ QCA_NL80211_VENDOR_SUBCMD_ROAM_SCAN_EVENT = 172,
+ QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG = 173,
+ QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT = 174,
+ QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG = 175,
+ QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_AKMS = 176,
+ QCA_NL80211_VENDOR_SUBCMD_GET_FW_STATE = 177,
+ QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH = 178,
+ QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG = 179,
+ QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING = 180,
+ QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP = 181,
+ QCA_NL80211_VENDOR_SUBCMD_OEM_DATA = 182,
+ QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT = 183,
+ QCA_NL80211_VENDOR_SUBCMD_ADD_STA_NODE = 184,
+ QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE = 185,
+ QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO = 186,
+ QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS_EVENT = 187,
+ QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO = 188,
+ QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON = 189,
+ QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC = 190,
+ QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT = 191,
+ QCA_NL80211_VENDOR_SUBCMD_GETBAND = 192,
+ QCA_NL80211_VENDOR_SUBCMD_MEDIUM_ASSESS = 193,
+ QCA_NL80211_VENDOR_SUBCMD_UPDATE_SSID = 194,
+ QCA_NL80211_VENDOR_SUBCMD_WIFI_FW_STATS = 195,
+ QCA_NL80211_VENDOR_SUBCMD_MBSSID_TX_VDEV_STATUS = 196,
+ QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_MULTI_STA_POLICY = 197,
+ QCA_NL80211_VENDOR_SUBCMD_USABLE_CHANNELS = 198,
+ QCA_NL80211_VENDOR_SUBCMD_GET_RADAR_HISTORY = 199,
+ QCA_NL80211_VENDOR_SUBCMD_MDNS_OFFLOAD = 200,
+ /* 201 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_SET_MONITOR_MODE = 202,
+ QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS = 203,
+};
+
+enum qca_wlan_vendor_attr {
+ QCA_WLAN_VENDOR_ATTR_INVALID = 0,
+ /* used by QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY */
+ QCA_WLAN_VENDOR_ATTR_DFS = 1,
+ /* Used only when driver sends vendor events to the userspace under the
+ * command QCA_NL80211_VENDOR_SUBCMD_NAN. Not used when userspace sends
+ * commands to the driver.
+ */
+ QCA_WLAN_VENDOR_ATTR_NAN = 2,
+ /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */
+ QCA_WLAN_VENDOR_ATTR_STATS_EXT = 3,
+ /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */
+ QCA_WLAN_VENDOR_ATTR_IFINDEX = 4,
+ /* used by QCA_NL80211_VENDOR_SUBCMD_ROAMING, u32 with values defined
+ * by enum qca_roaming_policy.
+ */
+ QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY = 5,
+ QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6,
+ /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */
+ QCA_WLAN_VENDOR_ATTR_FEATURE_FLAGS = 7,
+ QCA_WLAN_VENDOR_ATTR_TEST = 8,
+ /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */
+ /* Unsigned 32-bit value. */
+ QCA_WLAN_VENDOR_ATTR_CONCURRENCY_CAPA = 9,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_2_4_BAND = 10,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_5_0_BAND = 11,
+ /* Unsigned 32-bit value from enum qca_set_band. The allowed values for
+ * this attribute are limited to QCA_SETBAND_AUTO, QCA_SETBAND_5G, and
+ * QCA_SETBAND_2G. This attribute is deprecated. Recommendation is to
+ * use QCA_WLAN_VENDOR_ATTR_SETBAND_MASK instead.
+ */
+ QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE = 12,
+ /* Dummy (NOP) attribute for 64 bit padding */
+ QCA_WLAN_VENDOR_ATTR_PAD = 13,
+ /* Unique FTM session cookie (Unsigned 64 bit). Specified in
+ * QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION. Reported in
+ * the session in QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT and
+ * QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE.
+ */
+ QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE = 14,
+ /* Indoor location capabilities, returned by
+ * QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA.
+ * see enum qca_wlan_vendor_attr_loc_capa.
+ */
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA = 15,
+ /* Array of nested attributes containing information about each peer
+ * in FTM measurement session. See enum qca_wlan_vendor_attr_peer_info
+ * for supported attributes for each peer.
+ */
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS = 16,
+ /* Array of nested attributes containing measurement results for
+ * one or more peers, reported by the
+ * QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT event.
+ * See enum qca_wlan_vendor_attr_peer_result for list of supported
+ * attributes.
+ */
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS = 17,
+ /* Flag attribute for enabling or disabling responder functionality. */
+ QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE = 18,
+ /* Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER
+ * command to specify the LCI report that will be sent by
+ * the responder during a measurement exchange. The format is
+ * defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.10.
+ */
+ QCA_WLAN_VENDOR_ATTR_FTM_LCI = 19,
+ /* Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER
+ * command to specify the location civic report that will
+ * be sent by the responder during a measurement exchange.
+ * The format is defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.13.
+ */
+ QCA_WLAN_VENDOR_ATTR_FTM_LCR = 20,
+ /* Session/measurement completion status code,
+ * reported in QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE and
+ * QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT
+ * see enum qca_vendor_attr_loc_session_status.
+ */
+ QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS = 21,
+ /* Initial dialog token used by responder (0 if not specified),
+ * unsigned 8 bit value.
+ */
+ QCA_WLAN_VENDOR_ATTR_FTM_INITIAL_TOKEN = 22,
+ /* AOA measurement type. Requested in QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS
+ * and optionally in QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION if
+ * AOA measurements are needed as part of an FTM session.
+ * Reported by QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT. See
+ * enum qca_wlan_vendor_attr_aoa_type.
+ */
+ QCA_WLAN_VENDOR_ATTR_AOA_TYPE = 23,
+ /* A bit mask (unsigned 32 bit value) of antenna arrays used
+ * by indoor location measurements. Refers to the antenna
+ * arrays described by QCA_VENDOR_ATTR_LOC_CAPA_ANTENNA_ARRAYS.
+ */
+ QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK = 24,
+ /* AOA measurement data. Its contents depends on the AOA measurement
+ * type and antenna array mask:
+ * QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: array of U16 values,
+ * phase of the strongest CIR path for each antenna in the measured
+ * array(s).
+ * QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: array of 2 U16
+ * values, phase and amplitude of the strongest CIR path for each
+ * antenna in the measured array(s).
+ */
+ QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT = 25,
+ /* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command
+ * to specify the chain number (unsigned 32 bit value) to inquire
+ * the corresponding antenna RSSI value
+ */
+ QCA_WLAN_VENDOR_ATTR_CHAIN_INDEX = 26,
+ /* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command
+ * to report the specific antenna RSSI value (unsigned 32 bit value)
+ */
+ QCA_WLAN_VENDOR_ATTR_CHAIN_RSSI = 27,
+ /* Frequency in MHz, various uses. Unsigned 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_FREQ = 28,
+ /* TSF timer value, unsigned 64 bit value.
+ * May be returned by various commands.
+ */
+ QCA_WLAN_VENDOR_ATTR_TSF = 29,
+ /* DMG RF sector index, unsigned 16 bit number. Valid values are
+ * 0..127 for sector indices or 65535 as special value used to
+ * unlock sector selection in
+ * QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR.
+ */
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX = 30,
+ /* DMG RF sector type, unsigned 8 bit value. One of the values
+ * in enum qca_wlan_vendor_attr_dmg_rf_sector_type.
+ */
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE = 31,
+ /* Bitmask of DMG RF modules for which information is requested. Each
+ * bit corresponds to an RF module with the same index as the bit
+ * number. Unsigned 32 bit number but only low 8 bits can be set since
+ * all DMG chips currently have up to 8 RF modules.
+ */
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_MODULE_MASK = 32,
+ /* Array of nested attributes where each entry is DMG RF sector
+ * configuration for a single RF module.
+ * Attributes for each entry are taken from enum
+ * qca_wlan_vendor_attr_dmg_rf_sector_cfg.
+ * Specified in QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG
+ * and returned by QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG.
+ */
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG = 33,
+ /* Used in QCA_NL80211_VENDOR_SUBCMD_STATS_EXT command
+ * to report frame aggregation statistics to userspace.
+ */
+ QCA_WLAN_VENDOR_ATTR_RX_AGGREGATION_STATS_HOLES_NUM = 34,
+ QCA_WLAN_VENDOR_ATTR_RX_AGGREGATION_STATS_HOLES_INFO = 35,
+ /* Unsigned 8-bit value representing MBO transition reason code as
+ * provided by the AP used by subcommand
+ * QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS. This is
+ * specified by the userspace in the request to the driver.
+ */
+ QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON = 36,
+ /* Array of nested attributes, BSSID and status code, used by subcommand
+ * QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS, where each
+ * entry is taken from enum qca_wlan_vendor_attr_btm_candidate_info.
+ * The userspace space specifies the list/array of candidate BSSIDs in
+ * the order of preference in the request. The driver specifies the
+ * status code, for each BSSID in the list, in the response. The
+ * acceptable candidates are listed in the order preferred by the
+ * driver.
+ */
+ QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO = 37,
+ /* Used in QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT command
+ * See enum qca_wlan_vendor_attr_brp_ant_limit_mode.
+ */
+ QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE = 38,
+ /* Used in QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT command
+ * to define the number of antennas to use for BRP.
+ * different purpose in each ANT_LIMIT_MODE:
+ * DISABLE - ignored
+ * EFFECTIVE - upper limit to number of antennas to be used
+ * FORCE - exact number of antennas to be used
+ * unsigned 8 bit value
+ */
+ QCA_WLAN_VENDOR_ATTR_BRP_ANT_NUM_LIMIT = 39,
+ /* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command
+ * to report the corresponding antenna index to the chain RSSI value
+ */
+ QCA_WLAN_VENDOR_ATTR_ANTENNA_INFO = 40,
+ /* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command to report
+ * the specific antenna EVM value (unsigned 32 bit value). With a
+ * determinate group of antennas, the driver specifies the EVM value
+ * for each antenna ID, and application extract them in user space.
+ */
+ QCA_WLAN_VENDOR_ATTR_CHAIN_EVM = 41,
+ /*
+ * Used in QCA_NL80211_VENDOR_SUBCMD_GET_FW_STATE command to report
+ * wlan firmware current state. FW state is an unsigned 8 bit value,
+ * one of the values in enum qca_wlan_vendor_attr_fw_state.
+ */
+ QCA_WLAN_VENDOR_ATTR_FW_STATE = 42,
+
+ /* Unsigned 32-bitmask value from enum qca_set_band. Substitutes the
+ * attribute QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE for which only a subset
+ * of single values from enum qca_set_band are valid. This attribute
+ * uses bitmask combinations to define the respective allowed band
+ * combinations and this attributes takes precedence over
+ * QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE if both attributes are included.
+ */
+ QCA_WLAN_VENDOR_ATTR_SETBAND_MASK = 43,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1,
+};
+
+enum qca_roaming_policy {
+ QCA_ROAMING_NOT_ALLOWED,
+ QCA_ROAMING_ALLOWED_WITHIN_ESS,
+};
+
+/**
+ * enum qca_roam_reason - Represents the reason codes for roaming. Used by
+ * QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REASON.
+ *
+ * @QCA_ROAM_REASON_UNKNOWN: Any reason that do not classify under the below
+ * reasons.
+ *
+ * @QCA_ROAM_REASON_PER: Roam triggered when packet error rates (PER) breached
+ * the configured threshold.
+ *
+ * @QCA_ROAM_REASON_BEACON_MISS: Roam triggered due to the continuous configured
+ * beacon misses from the then connected AP.
+ *
+ * @QCA_ROAM_REASON_POOR_RSSI: Roam triggered due to the poor RSSI reported
+ * by the connected AP.
+ *
+ * @QCA_ROAM_REASON_BETTER_RSSI: Roam triggered for finding a BSS with a better
+ * RSSI than the connected BSS. Here the RSSI of the current BSS is not poor.
+ *
+ * @QCA_ROAM_REASON_CONGESTION: Roam triggered considering the connected channel
+ * or environment being very noisy or congested.
+ *
+ * @QCA_ROAM_REASON_USER_TRIGGER: Roam triggered due to an explicit request
+ * from the user (user space).
+ *
+ * @QCA_ROAM_REASON_BTM: Roam triggered due to BTM Request frame received from
+ * the connected AP.
+ *
+ * @QCA_ROAM_REASON_BSS_LOAD: Roam triggered due to the channel utilization
+ * breaching out the configured threshold.
+ *
+ * @QCA_ROAM_REASON_WTC: Roam triggered due to Wireless to Cellular BSS
+ * transition request.
+ *
+ * @QCA_ROAM_REASON_IDLE: Roam triggered when device is suspended, there is no
+ * data activity with the AP and the current RSSI falls below a certain
+ * threshold.
+ *
+ * @QCA_ROAM_REASON_DISCONNECTION: Roam triggered due to Deauthentication or
+ * Disassociation frames received from the connected AP.
+ *
+ * @QCA_ROAM_REASON_PERIODIC_TIMER: Roam triggered as part of the periodic scan
+ * that happens when there is no candidate AP found during the poor RSSI scan
+ * trigger.
+ *
+ * @QCA_ROAM_REASON_BACKGROUND_SCAN: Roam triggered based on the scan results
+ * obtained from an external scan (not aimed at roaming).
+ *
+ * @QCA_ROAM_REASON_BT_ACTIVITY: Roam triggered due to Bluetooth connection is
+ * established when the station is connected in the 2.4 GHz band.
+ */
+enum qca_roam_reason {
+ QCA_ROAM_REASON_UNKNOWN,
+ QCA_ROAM_REASON_PER,
+ QCA_ROAM_REASON_BEACON_MISS,
+ QCA_ROAM_REASON_POOR_RSSI,
+ QCA_ROAM_REASON_BETTER_RSSI,
+ QCA_ROAM_REASON_CONGESTION,
+ QCA_ROAM_REASON_USER_TRIGGER,
+ QCA_ROAM_REASON_BTM,
+ QCA_ROAM_REASON_BSS_LOAD,
+ QCA_ROAM_REASON_WTC,
+ QCA_ROAM_REASON_IDLE,
+ QCA_ROAM_REASON_DISCONNECTION,
+ QCA_ROAM_REASON_PERIODIC_TIMER,
+ QCA_ROAM_REASON_BACKGROUND_SCAN,
+ QCA_ROAM_REASON_BT_ACTIVITY,
+};
+
+enum qca_wlan_vendor_attr_roam_auth {
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_SUBNET_STATUS,
+ /* Indicates the status of re-association requested by user space for
+ * the BSSID specified by QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID.
+ * Type u16.
+ * Represents the status code from AP. Use
+ * %WLAN_STATUS_UNSPECIFIED_FAILURE if the device cannot give you the
+ * real status code for failures.
+ */
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_STATUS,
+ /* This attribute indicates that the old association was maintained when
+ * a re-association is requested by user space and that re-association
+ * attempt fails (i.e., cannot connect to the requested BSS, but can
+ * remain associated with the BSS with which the association was in
+ * place when being requested to roam). Used along with
+ * WLAN_VENDOR_ATTR_ROAM_AUTH_STATUS to indicate the current
+ * re-association status. Type flag.
+ * This attribute is applicable only for re-association failure cases.
+ */
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RETAIN_CONNECTION,
+ /* This attribute specifies the PMK if one was newly generated during
+ * FILS roaming. This is added to the PMKSA cache and is used in
+ * subsequent connections with PMKSA caching.
+ */
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PMK = 11,
+ /* This attribute specifies the PMKID used/generated for the current
+ * FILS roam. This is used in subsequent connections with PMKSA caching.
+ */
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PMKID = 12,
+ /* A 16-bit unsigned value specifying the next sequence number to use
+ * in ERP message in the currently associated realm. This is used in
+ * doing subsequent ERP based connections in the same realm.
+ */
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_FILS_ERP_NEXT_SEQ_NUM = 13,
+ /* A 16-bit unsigned value representing the reasons for the roaming.
+ * Defined by enum qca_roam_reason.
+ */
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REASON = 14,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_MAX =
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST - 1
+};
+
+enum qca_wlan_vendor_attr_p2p_listen_offload {
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INVALID = 0,
+ /* A 32-bit unsigned value; the P2P listen frequency (MHz); must be one
+ * of the social channels.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CHANNEL,
+ /* A 32-bit unsigned value; the P2P listen offload period (ms).
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_PERIOD,
+ /* A 32-bit unsigned value; the P2P listen interval duration (ms).
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INTERVAL,
+ /* A 32-bit unsigned value; number of interval times the firmware needs
+ * to run the offloaded P2P listen operation before it stops.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_COUNT,
+ /* An array of arbitrary binary data with one or more 8-byte values.
+ * The device types include both primary and secondary device types.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_DEVICE_TYPES,
+ /* An array of unsigned 8-bit characters; vendor information elements.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_VENDOR_IE,
+ /* A 32-bit unsigned value; a control flag to indicate whether listen
+ * results need to be flushed to wpa_supplicant.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CTRL_FLAG,
+ /* A 8-bit unsigned value; reason code for P2P listen offload stop
+ * event.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_MAX =
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_acs_offload - Defines attributes to be used with
+ * vendor command/event QCA_NL80211_VENDOR_SUBCMD_DO_ACS.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL: Required (u8).
+ * Used with event to notify the primary channel number selected in ACS
+ * operation.
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL is deprecated; use
+ * QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_FREQUENCY instead.
+ * To maintain backward compatibility, QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL
+ * is still used if either of the driver or user space application doesn't
+ * support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL: Required (u8).
+ * Used with event to notify the secondary channel number selected in ACS
+ * operation.
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL is deprecated; use
+ * QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_FREQUENCY instead.
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL is still used if either of
+ * the driver or user space application doesn't support 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE: Required (u8).
+ * (a) Used with command to configure hw_mode from
+ * enum qca_wlan_vendor_acs_hw_mode for ACS operation.
+ * (b) Also used with event to notify the hw_mode of selected primary channel
+ * in ACS operation.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED: Flag attribute.
+ * Used with command to configure ACS operation for HT mode.
+ * Disable (flag attribute not present) - HT disabled and
+ * Enable (flag attribute present) - HT enabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED: Flag attribute.
+ * Used with command to configure ACS operation for HT40 mode.
+ * Disable (flag attribute not present) - HT40 disabled and
+ * Enable (flag attribute present) - HT40 enabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED: Flag attribute.
+ * Used with command to configure ACS operation for VHT mode.
+ * Disable (flag attribute not present) - VHT disabled and
+ * Enable (flag attribute present) - VHT enabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH: Optional (u16) with command and
+ * mandatory with event.
+ * If specified in command path, ACS operation is configured with the given
+ * channel width (in MHz).
+ * In event path, specifies the channel width of the primary channel selected.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST: Required and type is NLA_UNSPEC.
+ * Used with command to configure channel list using an array of
+ * channel numbers (u8).
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * the driver mandates use of QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST whereas
+ * QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST is optional.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL: Required (u8).
+ * Used with event to notify the VHT segment 0 center channel number selected in
+ * ACS operation. The value is the index of the channel center frequency for
+ * 20 MHz, 40 MHz, and 80 MHz channels. The value is the center frequency index
+ * of the primary 80 MHz segment for 160 MHz and 80+80 MHz channels.
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL is deprecated; use
+ * QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_FREQUENCY instead.
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL is still used if either of
+ * the driver or user space application doesn't support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL: Required (u8).
+ * Used with event to notify the VHT segment 1 center channel number selected in
+ * ACS operation. The value is zero for 20 MHz, 40 MHz, and 80 MHz channels.
+ * The value is the index of the channel center frequency for 160 MHz channels
+ * and the center frequency index of the secondary 80 MHz segment for 80+80 MHz
+ * channels.
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL is deprecated; use
+ * QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_FREQUENCY instead.
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL is still used if either of
+ * the driver or user space application doesn't support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST: Required and type is NLA_UNSPEC.
+ * Used with command to configure the channel list using an array of channel
+ * center frequencies in MHz (u32).
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * the driver first parses the frequency list and if it fails to get a frequency
+ * list, parses the channel list specified using
+ * QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST (considers only 2 GHz and 5 GHz channels in
+ * QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST).
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_FREQUENCY: Required (u32).
+ * Used with event to notify the primary channel center frequency (MHz) selected
+ * in ACS operation.
+ * Note: If the driver supports the 6 GHz band, the event sent from the driver
+ * includes this attribute along with QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_FREQUENCY: Required (u32).
+ * Used with event to notify the secondary channel center frequency (MHz)
+ * selected in ACS operation.
+ * Note: If the driver supports the 6 GHz band, the event sent from the driver
+ * includes this attribute along with
+ * QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_FREQUENCY: Required (u32).
+ * Used with event to notify the VHT segment 0 center channel frequency (MHz)
+ * selected in ACS operation.
+ * Note: If the driver supports the 6 GHz band, the event sent from the driver
+ * includes this attribute along with
+ * QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_FREQUENCY: Required (u32).
+ * Used with event to notify the VHT segment 1 center channel frequency (MHz)
+ * selected in ACS operation.
+ * Note: If the driver supports the 6 GHz band, the event sent from the driver
+ * includes this attribute along with
+ * QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_EDMG_ENABLED: Flag attribute.
+ * Used with command to notify the driver of EDMG request for ACS
+ * operation.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_EDMG_CHANNEL: Optional (u8).
+ * Used with event to notify the EDMG channel number selected in ACS
+ * operation.
+ * EDMG primary channel is indicated by QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_PUNCTURE_BITMAP: Optional (u16).
+ * Used with event to notify the puncture pattern selected in ACS operation.
+ * Encoding for this attribute will follow the convention used in the Disabled
+ * Subchannel Bitmap field of the EHT Operation IE.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_EHT_ENABLED: Flag attribute.
+ * Used with command to configure ACS operation for EHT mode.
+ * Disable (flag attribute not present) - EHT disabled and
+ * Enable (flag attribute present) - EHT enabled.
+ */
+enum qca_wlan_vendor_attr_acs_offload {
+ QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL = 1,
+ QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL = 2,
+ QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE = 3,
+ QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED = 4,
+ QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED = 5,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED = 6,
+ QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH = 7,
+ QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST = 8,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL = 9,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL = 10,
+ QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST = 11,
+ QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_FREQUENCY = 12,
+ QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_FREQUENCY = 13,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_FREQUENCY = 14,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_FREQUENCY = 15,
+ QCA_WLAN_VENDOR_ATTR_ACS_EDMG_ENABLED = 16,
+ QCA_WLAN_VENDOR_ATTR_ACS_EDMG_CHANNEL = 17,
+ QCA_WLAN_VENDOR_ATTR_ACS_PUNCTURE_BITMAP = 18,
+ QCA_WLAN_VENDOR_ATTR_ACS_EHT_ENABLED = 19,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ACS_MAX =
+ QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_acs_hw_mode - Defines HW mode to be used with the
+ * vendor command/event QCA_NL80211_VENDOR_SUBCMD_DO_ACS.
+ *
+ * @QCA_ACS_MODE_IEEE80211B: 802.11b mode
+ * @QCA_ACS_MODE_IEEE80211G: 802.11g mode
+ * @QCA_ACS_MODE_IEEE80211A: 802.11a mode
+ * @QCA_ACS_MODE_IEEE80211AD: 802.11ad mode
+ * @QCA_ACS_MODE_IEEE80211ANY: all modes
+ * @QCA_ACS_MODE_IEEE80211AX: 802.11ax mode
+ */
+enum qca_wlan_vendor_acs_hw_mode {
+ QCA_ACS_MODE_IEEE80211B,
+ QCA_ACS_MODE_IEEE80211G,
+ QCA_ACS_MODE_IEEE80211A,
+ QCA_ACS_MODE_IEEE80211AD,
+ QCA_ACS_MODE_IEEE80211ANY,
+ QCA_ACS_MODE_IEEE80211AX,
+};
+
+/**
+ * enum qca_wlan_vendor_features - Vendor device/driver feature flags
+ *
+ * @QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD: Device supports key
+ * management offload, a mechanism where the station's firmware
+ * does the exchange with the AP to establish the temporal keys
+ * after roaming, rather than having the user space wpa_supplicant do it.
+ * @QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY: Device supports automatic
+ * band selection based on channel selection results.
+ * @QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS: Device supports
+ * simultaneous off-channel operations.
+ * @QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD: Device supports P2P
+ * Listen offload; a mechanism where the station's firmware takes care of
+ * responding to incoming Probe Request frames received from other P2P
+ * Devices whilst in Listen state, rather than having the user space
+ * wpa_supplicant do it. Information from received P2P requests are
+ * forwarded from firmware to host whenever the host processor wakes up.
+ * @QCA_WLAN_VENDOR_FEATURE_OCE_STA: Device supports all OCE non-AP STA
+ * specific features.
+ * @QCA_WLAN_VENDOR_FEATURE_OCE_AP: Device supports all OCE AP specific
+ * features.
+ * @QCA_WLAN_VENDOR_FEATURE_OCE_STA_CFON: Device supports OCE STA-CFON
+ * specific features only. If a Device sets this bit but not the
+ * %QCA_WLAN_VENDOR_FEATURE_OCE_AP, the userspace shall assume that
+ * this Device may not support all OCE AP functionalities but can support
+ * only OCE STA-CFON functionalities.
+ * @QCA_WLAN_VENDOR_FEATURE_SELF_MANAGED_REGULATORY: Device supports self
+ * managed regulatory.
+ * @QCA_WLAN_VENDOR_FEATURE_TWT: Device supports TWT (Target Wake Time).
+ * @QCA_WLAN_VENDOR_FEATURE_11AX: Device supports 802.11ax (HE)
+ * @QCA_WLAN_VENDOR_FEATURE_6GHZ_SUPPORT: Device supports 6 GHz band operation
+ * @QCA_WLAN_VENDOR_FEATURE_THERMAL_CONFIG: Device is capable of receiving
+ * and applying thermal configuration through
+ * %QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL and
+ * %QCA_WLAN_VENDOR_ATTR_THERMAL_COMPLETION_WINDOW attributes from
+ * userspace.
+ * @QCA_WLAN_VENDOR_FEATURE_ADAPTIVE_11R: Device supports Adaptive 11r.
+ * With Adaptive 11r feature, access points advertise the vendor
+ * specific IEs and MDE but do not include FT AKM in the RSNE.
+ * The Adaptive 11r supported stations are expected to identify
+ * such vendor specific IEs and connect to the AP in FT mode though
+ * the profile is configured in non-FT mode.
+ * The driver-based SME cases also need to have this support for
+ * Adaptive 11r to handle the connection and roaming scenarios.
+ * This flag indicates the support for the same to the user space.
+ * @QCA_WLAN_VENDOR_FEATURE_CONCURRENT_BAND_SESSIONS: Device supports
+ * concurrent network sessions on different Wi-Fi bands. This feature
+ * capability is attributed to the hardware's capability to support
+ * the same (e.g., DBS).
+ * @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT: Flag indicating whether the
+ * responses for the respective TWT operations are asynchronous (separate
+ * event message) from the driver. If not specified, the responses are
+ * synchronous (in vendor command reply) to the request. Each TWT
+ * operation is specifically mentioned (against its respective
+ * documentation) to support either of these or both modes.
+ * @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits
+ */
+enum qca_wlan_vendor_features {
+ QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD = 0,
+ QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY = 1,
+ QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS = 2,
+ QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD = 3,
+ QCA_WLAN_VENDOR_FEATURE_OCE_STA = 4,
+ QCA_WLAN_VENDOR_FEATURE_OCE_AP = 5,
+ QCA_WLAN_VENDOR_FEATURE_OCE_STA_CFON = 6,
+ QCA_WLAN_VENDOR_FEATURE_SELF_MANAGED_REGULATORY = 7,
+ QCA_WLAN_VENDOR_FEATURE_TWT = 8,
+ QCA_WLAN_VENDOR_FEATURE_11AX = 9,
+ QCA_WLAN_VENDOR_FEATURE_6GHZ_SUPPORT = 10,
+ QCA_WLAN_VENDOR_FEATURE_THERMAL_CONFIG = 11,
+ QCA_WLAN_VENDOR_FEATURE_ADAPTIVE_11R = 12,
+ QCA_WLAN_VENDOR_FEATURE_CONCURRENT_BAND_SESSIONS = 13,
+ QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT = 14,
+ NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */
+};
+
+/**
+ * enum qca_wlan_vendor_attr_data_offload_ind - Vendor Data Offload Indication
+ *
+ * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION: Session corresponding to
+ * the offloaded data.
+ * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL: Protocol of the offloaded
+ * data.
+ * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT: Event type for the data offload
+ * indication.
+ */
+enum qca_wlan_vendor_attr_data_offload_ind {
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION,
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL,
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_MAX =
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ocb_set_config - Vendor subcmd attributes to set
+ * OCB config
+ *
+ * @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_CHANNEL_COUNT: Number of channels in the
+ * configuration
+ * @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_SCHEDULE_SIZE: Size of the schedule
+ * @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_CHANNEL_ARRAY: Array of channels
+ * @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_SCHEDULE_ARRAY: Array of channels to be
+ * scheduled
+ * @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_NDL_CHANNEL_ARRAY: Array of NDL channel
+ * information
+ * @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_NDL_ACTIVE_STATE_ARRAY: Array of NDL
+ * active state configuration
+ * @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_FLAGS: Configuration flags such as
+ * OCB_CONFIG_FLAG_80211_FRAME_MODE
+ * @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_DEF_TX_PARAM: Default TX parameters to
+ * use in the case that a packet is sent without a TX control header
+ * @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_TA_MAX_DURATION: Max duration after the
+ * last TA received that the local time set by TA is synchronous to other
+ * communicating OCB STAs.
+ */
+enum qca_wlan_vendor_attr_ocb_set_config {
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_CHANNEL_COUNT = 1,
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_SCHEDULE_SIZE = 2,
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_CHANNEL_ARRAY = 3,
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_SCHEDULE_ARRAY = 4,
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_NDL_CHANNEL_ARRAY = 5,
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_NDL_ACTIVE_STATE_ARRAY = 6,
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_FLAGS = 7,
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_DEF_TX_PARAM = 8,
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_TA_MAX_DURATION = 9,
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ocb_set_utc_time - Vendor subcmd attributes to set
+ * UTC time
+ *
+ * @QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_VALUE: The UTC time as an array of
+ * 10 bytes
+ * @QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_ERROR: The time error as an array of
+ * 5 bytes
+ */
+enum qca_wlan_vendor_attr_ocb_set_utc_time {
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_VALUE = 1,
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_ERROR = 2,
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_MAX =
+ QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ocb_start_timing_advert - Vendor subcmd attributes
+ * to start sending timing advert frames
+ *
+ * @QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_CHANNEL_FREQ: Cannel frequency
+ * on which to send the frames
+ * @QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_REPEAT_RATE: Number of times
+ * the frame is sent in 5 seconds
+ */
+enum qca_wlan_vendor_attr_ocb_start_timing_advert {
+ QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_CHANNEL_FREQ = 1,
+ QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_REPEAT_RATE = 2,
+ QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_MAX =
+ QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ocb_stop_timing_advert - Vendor subcmd attributes
+ * to stop timing advert
+ *
+ * @QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_CHANNEL_FREQ: The channel
+ * frequency on which to stop the timing advert
+ */
+enum qca_wlan_vendor_attr_ocb_stop_timing_advert {
+ QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_CHANNEL_FREQ = 1,
+ QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_MAX =
+ QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ocb_get_tsf_response - Vendor subcmd attributes to
+ * get TSF timer value
+ *
+ * @QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_TIMER_HIGH: Higher 32 bits of the
+ * timer
+ * @QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_TIMER_LOW: Lower 32 bits of the timer
+ */
+enum qca_wlan_vendor_attr_ocb_get_tsf_resp {
+ QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_TIMER_HIGH = 1,
+ QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_TIMER_LOW = 2,
+ QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_MAX =
+ QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_AFTER_LAST - 1
+};
+
+enum qca_vendor_attr_get_preferred_freq_list {
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_INVALID,
+ /* A 32-unsigned value; the interface type/mode for which the preferred
+ * frequency list is requested (see enum qca_iface_type for possible
+ * values); used in GET_PREFERRED_FREQ_LIST command from user-space to
+ * kernel and in the kernel response back to user-space.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_IFACE_TYPE,
+ /* An array of 32-unsigned values; values are frequency (MHz); sent
+ * from kernel space to user space.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST,
+ /* An array of nested values as per enum qca_wlan_vendor_attr_pcl
+ * attribute. Each element contains frequency (MHz), weight, and flag
+ * bit mask indicating how the frequency should be used in P2P
+ * negotiation; sent from kernel space to user space.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_WEIGHED_PCL,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_MAX =
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST - 1
+};
+
+enum qca_vendor_attr_probable_oper_channel {
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_INVALID,
+ /* 32-bit unsigned value; indicates the connection/iface type likely to
+ * come on this channel (see enum qca_iface_type).
+ */
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_IFACE_TYPE,
+ /* 32-bit unsigned value; the frequency (MHz) of the probable channel */
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_FREQ,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_MAX =
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST - 1
+};
+
+enum qca_iface_type {
+ QCA_IFACE_TYPE_STA,
+ QCA_IFACE_TYPE_AP,
+ QCA_IFACE_TYPE_P2P_CLIENT,
+ QCA_IFACE_TYPE_P2P_GO,
+ QCA_IFACE_TYPE_IBSS,
+ QCA_IFACE_TYPE_TDLS,
+};
+
+enum qca_set_band {
+ QCA_SETBAND_AUTO = 0,
+ QCA_SETBAND_5G = BIT(0),
+ QCA_SETBAND_2G = BIT(1),
+ QCA_SETBAND_6G = BIT(2),
+};
+
+/**
+ * enum qca_access_policy - Access control policy
+ *
+ * Access control policy is applied on the configured IE
+ * (QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE).
+ * To be set with QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY.
+ *
+ * @QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED: Deny Wi-Fi connections which match
+ * the specific configuration (IE) set, i.e., allow all the
+ * connections which do not match the configuration.
+ * @QCA_ACCESS_POLICY_DENY_UNLESS_LISTED: Accept Wi-Fi connections which match
+ * the specific configuration (IE) set, i.e., deny all the
+ * connections which do not match the configuration.
+ */
+enum qca_access_policy {
+ QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED,
+ QCA_ACCESS_POLICY_DENY_UNLESS_LISTED,
+};
+
+/**
+ * enum qca_vendor_attr_tsf_cmd: Vendor attributes for TSF capture
+ * @QCA_WLAN_VENDOR_ATTR_TSF_CMD: Required (u32)
+ * Specify the TSF command. Possible values are defined in
+ * &enum qca_tsf_cmd.
+ * @QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE: Optional (u64)
+ * This attribute contains TSF timer value. This attribute is only available
+ * in %QCA_TSF_GET or %QCA_TSF_SYNC_GET response.
+ * @QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE: Optional (u64)
+ * This attribute contains SOC timer value at TSF capture. This attribute is
+ * only available in %QCA_TSF_GET or %QCA_TSF_SYNC_GET response.
+ * @QCA_WLAN_VENDOR_ATTR_TSF_SYNC_INTERVAL: Optional (u32)
+ * This attribute is used to provide TSF sync interval and only applicable when
+ * TSF command is %QCA_TSF_SYNC_START. If this attribute is not provided, the
+ * driver will use the default value. Time unit is in milliseconds.
+ */
+enum qca_vendor_attr_tsf_cmd {
+ QCA_WLAN_VENDOR_ATTR_TSF_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TSF_CMD,
+ QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE,
+ QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE,
+ QCA_WLAN_VENDOR_ATTR_TSF_SYNC_INTERVAL,
+ QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TSF_MAX =
+ QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_tsf_cmd: TSF driver commands
+ * @QCA_TSF_CAPTURE: Initiate TSF Capture
+ * @QCA_TSF_GET: Get TSF capture value
+ * @QCA_TSF_SYNC_GET: Initiate TSF capture and return with captured value
+ * @QCA_TSF_AUTO_REPORT_ENABLE: Used in STA mode only. Once set, the target
+ * will automatically send TSF report to the host. To query
+ * %QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_UPLINK_DELAY, this operation needs to be
+ * initiated first.
+ * @QCA_TSF_AUTO_REPORT_DISABLE: Used in STA mode only. Once set, the target
+ * will not automatically send TSF report to the host. If
+ * %QCA_TSF_AUTO_REPORT_ENABLE is initiated and
+ * %QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_UPLINK_DELAY is not queried anymore, this
+ * operation needs to be initiated.
+ * @QCA_TSF_SYNC_START: Start periodic TSF sync feature. The driver periodically
+ * fetches TSF and host time mapping from the firmware with interval configured
+ * through the %QCA_WLAN_VENDOR_ATTR_TSF_SYNC_INTERVAL attribute. If the
+ * interval value is not provided the driver will use the default value. The
+ * userspace can query the TSF and host time mapping via the %QCA_TSF_GET
+ * command.
+ * @QCA_TSF_SYNC_STOP: Stop periodic TSF sync feature.
+ */
+enum qca_tsf_cmd {
+ QCA_TSF_CAPTURE,
+ QCA_TSF_GET,
+ QCA_TSF_SYNC_GET,
+ QCA_TSF_AUTO_REPORT_ENABLE,
+ QCA_TSF_AUTO_REPORT_DISABLE,
+ QCA_TSF_SYNC_START,
+ QCA_TSF_SYNC_STOP,
+};
+
+/**
+ * enum qca_vendor_attr_wisa_cmd
+ * @QCA_WLAN_VENDOR_ATTR_WISA_MODE: WISA mode value (u32)
+ * WISA setup vendor commands
+ */
+enum qca_vendor_attr_wisa_cmd {
+ QCA_WLAN_VENDOR_ATTR_WISA_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_WISA_MODE,
+ QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_WISA_MAX =
+ QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST - 1
+};
+
+/* IEEE 802.11 Vendor Specific elements */
+
+/**
+ * enum qca_vendor_element_id - QCA Vendor Specific element types
+ *
+ * These values are used to identify QCA Vendor Specific elements. The
+ * payload of the element starts with the three octet OUI (OUI_QCA) and
+ * is followed by a single octet type which is defined by this enum.
+ *
+ * @QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST: P2P preferred channel list.
+ * This element can be used to specify preference order for supported
+ * channels. The channels in this list are in preference order (the first
+ * one has the highest preference) and are described as a pair of
+ * (global) Operating Class and Channel Number (each one octet) fields.
+ *
+ * This extends the standard P2P functionality by providing option to have
+ * more than one preferred operating channel. When this element is present,
+ * it replaces the preference indicated in the Operating Channel attribute.
+ * For supporting other implementations, the Operating Channel attribute is
+ * expected to be used with the highest preference channel. Similarly, all
+ * the channels included in this Preferred channel list element are
+ * expected to be included in the Channel List attribute.
+ *
+ * This vendor element may be included in GO Negotiation Request, P2P
+ * Invitation Request, and Provision Discovery Request frames.
+ *
+ * @QCA_VENDOR_ELEM_HE_CAPAB: HE Capabilities element.
+ * This element can be used for pre-standard publication testing of HE
+ * before P802.11ax draft assigns the element ID. The payload of this
+ * vendor specific element is defined by the latest P802.11ax draft.
+ * Please note that the draft is still work in progress and this element
+ * payload is subject to change.
+ *
+ * @QCA_VENDOR_ELEM_HE_OPER: HE Operation element.
+ * This element can be used for pre-standard publication testing of HE
+ * before P802.11ax draft assigns the element ID. The payload of this
+ * vendor specific element is defined by the latest P802.11ax draft.
+ * Please note that the draft is still work in progress and this element
+ * payload is subject to change.
+ *
+ * @QCA_VENDOR_ELEM_RAPS: RAPS element (OFDMA-based Random Access Parameter Set
+ * element).
+ * This element can be used for pre-standard publication testing of HE
+ * before P802.11ax draft assigns the element ID extension. The payload of
+ * this vendor specific element is defined by the latest P802.11ax draft
+ * (not including the Element ID Extension field). Please note that the
+ * draft is still work in progress and this element payload is subject to
+ * change.
+ *
+ * @QCA_VENDOR_ELEM_MU_EDCA_PARAMS: MU EDCA Parameter Set element.
+ * This element can be used for pre-standard publication testing of HE
+ * before P802.11ax draft assigns the element ID extension. The payload of
+ * this vendor specific element is defined by the latest P802.11ax draft
+ * (not including the Element ID Extension field). Please note that the
+ * draft is still work in progress and this element payload is subject to
+ * change.
+ *
+ * @QCA_VENDOR_ELEM_BSS_COLOR_CHANGE: BSS Color Change Announcement element.
+ * This element can be used for pre-standard publication testing of HE
+ * before P802.11ax draft assigns the element ID extension. The payload of
+ * this vendor specific element is defined by the latest P802.11ax draft
+ * (not including the Element ID Extension field). Please note that the
+ * draft is still work in progress and this element payload is subject to
+ * change.
+ *
+ * @QCA_VENDOR_ELEM_ALLPLAY: Allplay element
+ */
+enum qca_vendor_element_id {
+ QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST = 0,
+ QCA_VENDOR_ELEM_HE_CAPAB = 1,
+ QCA_VENDOR_ELEM_HE_OPER = 2,
+ QCA_VENDOR_ELEM_RAPS = 3,
+ QCA_VENDOR_ELEM_MU_EDCA_PARAMS = 4,
+ QCA_VENDOR_ELEM_BSS_COLOR_CHANGE = 5,
+ QCA_VENDOR_ELEM_ALLPLAY = 6,
+};
+
+/**
+ * enum qca_wlan_vendor_scan_priority - Specifies the valid values that the
+ * vendor scan attribute QCA_WLAN_VENDOR_ATTR_SCAN_PRIORITY can take.
+ * @QCA_WLAN_VENDOR_SCAN_PRIORITY_VERY_LOW: Very low priority
+ * @QCA_WLAN_VENDOR_SCAN_PRIORITY_LOW: Low priority
+ * @QCA_WLAN_VENDOR_SCAN_PRIORITY_MEDIUM: Medium priority
+ * @QCA_WLAN_VENDOR_SCAN_PRIORITY_HIGH: High priority
+ * @QCA_WLAN_VENDOR_SCAN_PRIORITY_VERY_HIGH: Very high priority
+ */
+enum qca_wlan_vendor_scan_priority {
+ QCA_WLAN_VENDOR_SCAN_PRIORITY_VERY_LOW = 0,
+ QCA_WLAN_VENDOR_SCAN_PRIORITY_LOW = 1,
+ QCA_WLAN_VENDOR_SCAN_PRIORITY_MEDIUM = 2,
+ QCA_WLAN_VENDOR_SCAN_PRIORITY_HIGH = 3,
+ QCA_WLAN_VENDOR_SCAN_PRIORITY_VERY_HIGH = 4,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_scan - Specifies vendor scan attributes
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_IE: IEs that should be included as part of scan
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES: Nested unsigned 32-bit attributes
+ * with frequencies to be scanned (in MHz)
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS: Nested attribute with SSIDs to be scanned
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES: Nested array attribute of supported
+ * rates to be included
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE: flag used to send probe requests
+ * at non CCK rate in 2GHz band
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS: Unsigned 32-bit scan flags
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE: Unsigned 64-bit cookie provided by the
+ * driver for the specific scan request
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_STATUS: Unsigned 8-bit status of the scan
+ * request decoded as in enum scan_status
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC: 6-byte MAC address to use when randomisation
+ * scan flag is set
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK: 6-byte MAC address mask to be used with
+ * randomisation
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_BSSID: 6-byte MAC address representing the
+ * specific BSSID to scan for.
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_DWELL_TIME: Unsigned 64-bit dwell time in
+ * microseconds. This is a common value which applies across all
+ * frequencies specified by QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES.
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_PRIORITY: Priority of vendor scan relative to
+ * other scan requests. It is a u32 attribute and takes values from enum
+ * qca_wlan_vendor_scan_priority. This is an optional attribute.
+ * If this attribute is not configured, the driver shall use
+ * QCA_WLAN_VENDOR_SCAN_PRIORITY_HIGH as the priority of vendor scan.
+ */
+enum qca_wlan_vendor_attr_scan {
+ QCA_WLAN_VENDOR_ATTR_SCAN_INVALID_PARAM = 0,
+ QCA_WLAN_VENDOR_ATTR_SCAN_IE = 1,
+ QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES = 2,
+ QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS = 3,
+ QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES = 4,
+ QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE = 5,
+ QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS = 6,
+ QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE = 7,
+ QCA_WLAN_VENDOR_ATTR_SCAN_STATUS = 8,
+ QCA_WLAN_VENDOR_ATTR_SCAN_MAC = 9,
+ QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK = 10,
+ QCA_WLAN_VENDOR_ATTR_SCAN_BSSID = 11,
+ QCA_WLAN_VENDOR_ATTR_SCAN_DWELL_TIME = 12,
+ QCA_WLAN_VENDOR_ATTR_SCAN_PRIORITY = 13,
+ QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SCAN_MAX =
+ QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST - 1
+};
+
+/**
+ * enum scan_status - Specifies the valid values the vendor scan attribute
+ * QCA_WLAN_VENDOR_ATTR_SCAN_STATUS can take
+ *
+ * @VENDOR_SCAN_STATUS_NEW_RESULTS: implies the vendor scan is successful with
+ * new scan results
+ * @VENDOR_SCAN_STATUS_ABORTED: implies the vendor scan was aborted in-between
+ */
+enum scan_status {
+ VENDOR_SCAN_STATUS_NEW_RESULTS,
+ VENDOR_SCAN_STATUS_ABORTED,
+ VENDOR_SCAN_STATUS_MAX,
+};
+
+/**
+ * enum qca_vendor_attr_ota_test - Specifies the values for vendor
+ * command QCA_NL80211_VENDOR_SUBCMD_OTA_TEST
+ * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE: enable ota test
+ */
+enum qca_vendor_attr_ota_test {
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_INVALID,
+ /* 8-bit unsigned value to indicate if OTA test is enabled */
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_MAX =
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_vendor_attr_txpower_scale - vendor sub commands index
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE: scaling value
+ */
+enum qca_vendor_attr_txpower_scale {
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_INVALID,
+ /* 8-bit unsigned value to indicate the scaling of tx power */
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_MAX =
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_vendor_attr_txpower_decr_db - Attributes for TX power decrease
+ *
+ * These attributes are used with QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB.
+ */
+enum qca_vendor_attr_txpower_decr_db {
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_INVALID,
+ /* 8-bit unsigned value to indicate the reduction of TX power in dB for
+ * a virtual interface.
+ */
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_MAX =
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST - 1
+};
+
+/* Attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
+ * QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION subcommands.
+ */
+enum qca_wlan_vendor_attr_config {
+ QCA_WLAN_VENDOR_ATTR_CONFIG_INVALID = 0,
+ /* Unsigned 32-bit value to set the DTIM period.
+ * Whether the wifi chipset wakes at every dtim beacon or a multiple of
+ * the DTIM period. If DTIM is set to 3, the STA shall wake up every 3
+ * DTIM beacons.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_DYNAMIC_DTIM = 1,
+ /* Unsigned 32-bit value to set the wifi_iface stats averaging factor
+ * used to calculate statistics like average the TSF offset or average
+ * number of frame leaked.
+ * For instance, upon Beacon frame reception:
+ * current_avg = ((beacon_TSF - TBTT) * factor + previous_avg * (0x10000 - factor) ) / 0x10000
+ * For instance, when evaluating leaky APs:
+ * current_avg = ((num frame received within guard time) * factor + previous_avg * (0x10000 - factor)) / 0x10000
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_STATS_AVG_FACTOR = 2,
+ /* Unsigned 32-bit value to configure guard time, i.e., when
+ * implementing IEEE power management based on frame control PM bit, how
+ * long the driver waits before shutting down the radio and after
+ * receiving an ACK frame for a Data frame with PM bit set.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GUARD_TIME = 3,
+ /* Unsigned 32-bit value to change the FTM capability dynamically */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_FINE_TIME_MEASUREMENT = 4,
+ /* Unsigned 16-bit value to configure maximum TX rate dynamically */
+ QCA_WLAN_VENDOR_ATTR_CONF_TX_RATE = 5,
+ /* Unsigned 32-bit value to configure the number of continuous
+ * Beacon Miss which shall be used by the firmware to penalize
+ * the RSSI.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS = 6,
+ /* Unsigned 8-bit value to configure the channel avoidance indication
+ * behavior. Firmware to send only one indication and ignore duplicate
+ * indications when set to avoid multiple Apps wakeups.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_AVOIDANCE_IND = 7,
+ /* 8-bit unsigned value to configure the maximum TX MPDU for
+ * aggregation.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION = 8,
+ /* 8-bit unsigned value to configure the maximum RX MPDU for
+ * aggregation.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION = 9,
+ /* 8-bit unsigned value to configure the Non aggregrate/11g sw
+ * retry threshold (0 disable, 31 max).
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY = 10,
+ /* 8-bit unsigned value to configure the aggregrate sw
+ * retry threshold (0 disable, 31 max).
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY = 11,
+ /* 8-bit unsigned value to configure the MGMT frame
+ * retry threshold (0 disable, 31 max).
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY = 12,
+ /* 8-bit unsigned value to configure the CTRL frame
+ * retry threshold (0 disable, 31 max).
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY = 13,
+ /* 8-bit unsigned value to configure the propagation delay for
+ * 2G/5G band (0~63, units in us)
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY = 14,
+ /* Unsigned 32-bit value to configure the number of unicast TX fail
+ * packet count. The peer is disconnected once this threshold is
+ * reached.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT = 15,
+ /* Attribute used to set scan default IEs to the driver.
+ *
+ * These IEs can be used by scan operations that will be initiated by
+ * the driver/firmware.
+ *
+ * For further scan requests coming to the driver, these IEs should be
+ * merged with the IEs received along with scan request coming to the
+ * driver. If a particular IE is present in the scan default IEs but not
+ * present in the scan request, then that IE should be added to the IEs
+ * sent in the Probe Request frames for that scan request.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES = 16,
+ /* Unsigned 32-bit attribute for generic commands */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND = 17,
+ /* Unsigned 32-bit value attribute for generic commands */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_VALUE = 18,
+ /* Unsigned 32-bit data attribute for generic command response */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA = 19,
+ /* Unsigned 32-bit length attribute for
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_LENGTH = 20,
+ /* Unsigned 32-bit flags attribute for
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_FLAGS = 21,
+ /* Unsigned 32-bit, defining the access policy.
+ * See enum qca_access_policy. Used with
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY = 22,
+ /* Sets the list of full set of IEs for which a specific access policy
+ * has to be applied. Used along with
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY to control the access.
+ * Zero length payload can be used to clear this access constraint.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST = 23,
+ /* Unsigned 32-bit, specifies the interface index (netdev) for which the
+ * corresponding configurations are applied. If the interface index is
+ * not specified, the configurations are attributed to the respective
+ * wiphy.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX = 24,
+ /* 8-bit unsigned value to trigger QPower: 1-Enable, 0-Disable */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER = 25,
+ /* 8-bit unsigned value to configure the driver and below layers to
+ * ignore the assoc disallowed set by APs while connecting
+ * 1-Ignore, 0-Don't ignore
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_IGNORE_ASSOC_DISALLOWED = 26,
+ /* 32-bit unsigned value to trigger antenna diversity features:
+ * 1-Enable, 0-Disable
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ENA = 27,
+ /* 32-bit unsigned value to configure specific chain antenna */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_CHAIN = 28,
+ /* 32-bit unsigned value to trigger cycle selftest
+ * 1-Enable, 0-Disable
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST = 29,
+ /* 32-bit unsigned to configure the cycle time of selftest
+ * the unit is micro-second
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST_INTVL = 30,
+ /* 32-bit unsigned value to set reorder timeout for AC_VO */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_VOICE = 31,
+ /* 32-bit unsigned value to set reorder timeout for AC_VI */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_VIDEO = 32,
+ /* 32-bit unsigned value to set reorder timeout for AC_BE */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_BESTEFFORT = 33,
+ /* 32-bit unsigned value to set reorder timeout for AC_BK */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_BACKGROUND = 34,
+ /* 6-byte MAC address to point out the specific peer */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_PEER_MAC = 35,
+ /* 32-bit unsigned value to set window size for specific peer */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_WINLIMIT = 36,
+ /* 8-bit unsigned value to set the beacon miss threshold in 2.4 GHz */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_MISS_THRESHOLD_24 = 37,
+ /* 8-bit unsigned value to set the beacon miss threshold in 5 GHz */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_MISS_THRESHOLD_5 = 38,
+ /* 32-bit unsigned value to configure 5 or 10 MHz channel width for
+ * station device while in disconnect state. The attribute use the
+ * value of enum nl80211_chan_width: NL80211_CHAN_WIDTH_5 means 5 MHz,
+ * NL80211_CHAN_WIDTH_10 means 10 MHz. If set, the device work in 5 or
+ * 10 MHz channel width, the station will not connect to a BSS using 20
+ * MHz or higher bandwidth. Set to NL80211_CHAN_WIDTH_20_NOHT to
+ * clear this constraint.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_SUB20_CHAN_WIDTH = 39,
+ /* 32-bit unsigned value to configure the propagation absolute delay
+ * for 2G/5G band (units in us)
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_ABS_DELAY = 40,
+ /* 32-bit unsigned value to set probe period */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_PROBE_PERIOD = 41,
+ /* 32-bit unsigned value to set stay period */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_STAY_PERIOD = 42,
+ /* 32-bit unsigned value to set snr diff */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SNR_DIFF = 43,
+ /* 32-bit unsigned value to set probe dwell time */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_PROBE_DWELL_TIME = 44,
+ /* 32-bit unsigned value to set mgmt snr weight */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_MGMT_SNR_WEIGHT = 45,
+ /* 32-bit unsigned value to set data snr weight */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_DATA_SNR_WEIGHT = 46,
+ /* 32-bit unsigned value to set ack snr weight */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ACK_SNR_WEIGHT = 47,
+ /* 32-bit unsigned value to configure the listen interval.
+ * This is in units of beacon intervals. This configuration alters
+ * the negotiated listen interval with the AP during the connection.
+ * It is highly recommended to configure a value less than or equal to
+ * the one negotiated during the association. Configuring any greater
+ * value can have adverse effects (frame loss, AP disassociating STA,
+ * etc.).
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_LISTEN_INTERVAL = 48,
+ /*
+ * 8 bit unsigned value that is set on an AP/GO virtual interface to
+ * disable operations that would cause the AP/GO to leave its operating
+ * channel.
+ *
+ * This will restrict the scans to the AP/GO operating channel and the
+ * channels of the other band, if DBS is supported.A STA/CLI interface
+ * brought up after this setting is enabled, will be restricted to
+ * connecting to devices only on the AP/GO interface's operating channel
+ * or on the other band in DBS case. P2P supported channel list is
+ * modified, to only include AP interface's operating-channel and the
+ * channels of the other band if DBS is supported.
+ *
+ * These restrictions are only applicable as long as the AP/GO interface
+ * is alive. If the AP/GO interface is brought down then this
+ * setting/restriction is forgotten.
+ *
+ * If this variable is set on an AP/GO interface while a multi-channel
+ * concurrent session is active, it has no effect on the operation of
+ * the current interfaces, other than restricting the scan to the AP/GO
+ * operating channel and the other band channels if DBS is supported.
+ * However, if the STA is brought down and restarted then the new STA
+ * connection will either be formed on the AP/GO channel or on the
+ * other band in a DBS case. This is because of the scan being
+ * restricted on these channels as mentioned above.
+ *
+ * 1-Restrict / 0-Don't restrict offchannel operations.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RESTRICT_OFFCHANNEL = 49,
+ /*
+ * 8 bit unsigned value to enable/disable LRO (Large Receive Offload)
+ * on an interface.
+ * 1 - Enable, 0 - Disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_LRO = 50,
+
+ /*
+ * 8 bit unsigned value to globally enable/disable scan
+ * 1 - Enable, 0 - Disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_ENABLE = 51,
+
+ /* 8-bit unsigned value to set the total beacon miss count
+ * This parameter will set the total beacon miss count.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TOTAL_BEACON_MISS_COUNT = 52,
+
+ /* Unsigned 32-bit value to configure the number of continuous
+ * Beacon Miss which shall be used by the firmware to penalize
+ * the RSSI for BTC.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS_BTC = 53,
+
+ /* 8-bit unsigned value to configure the driver and below layers to
+ * enable/disable all FILS features.
+ * 0-enable, 1-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_DISABLE_FILS = 54,
+
+ /* 16-bit unsigned value to configure the level of WLAN latency
+ * module. See enum qca_wlan_vendor_attr_config_latency_level.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL = 55,
+
+ /* 8-bit unsigned value indicating the driver to use the RSNE as-is from
+ * the connect interface. Exclusively used for the scenarios where the
+ * device is used as a test bed device with special functionality and
+ * not recommended for production. This helps driver to not validate the
+ * RSNE passed from user space and thus allow arbitrary IE data to be
+ * used for testing purposes.
+ * 1-enable, 0-disable.
+ * Applications set/reset this configuration. If not reset, this
+ * parameter remains in use until the driver is unloaded.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RSN_IE = 56,
+
+ /* 8-bit unsigned value to trigger green Tx power saving.
+ * 1-Enable, 0-Disable
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GTX = 57,
+
+ /* Attribute to configure disconnect IEs to the driver.
+ * This carries an array of unsigned 8-bit characters.
+ *
+ * If this is configured, driver shall fill the IEs in disassoc/deauth
+ * frame.
+ * These IEs are expected to be considered only for the next
+ * immediate disconnection (disassoc/deauth frame) originated by
+ * the DUT, irrespective of the entity (user space/driver/firmware)
+ * triggering the disconnection.
+ * The host drivers are not expected to use the IEs set through
+ * this interface for further disconnections after the first immediate
+ * disconnection initiated post the configuration.
+ * If the IEs are also updated through cfg80211 interface (after the
+ * enhancement to cfg80211_disconnect), host driver is expected to
+ * take the union of IEs from both of these interfaces and send in
+ * further disassoc/deauth frames.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_DISCONNECT_IES = 58,
+
+ /* 8-bit unsigned value for ELNA bypass.
+ * 1-Enable, 0-Disable
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ELNA_BYPASS = 59,
+
+ /* 8-bit unsigned value. This attribute enables/disables the host driver
+ * to send the Beacon Report Response with failure reason for the
+ * scenarios where STA cannot honor the Beacon Report Request from AP.
+ * 1-Enable, 0-Disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_REPORT_FAIL = 60,
+
+ /* 8-bit unsigned value. This attribute enables/disables the host driver
+ * to send roam reason information in the Reassociation Request frame to
+ * the target AP when roaming within the same ESS.
+ * 1-Enable, 0-Disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ROAM_REASON = 61,
+
+ /* 32-bit unsigned value to configure different PHY modes to the
+ * driver/firmware. The possible values are defined in
+ * enum qca_wlan_vendor_phy_mode. The configuration will be reset to
+ * default value, i.e., QCA_WLAN_VENDOR_PHY_MODE_AUTO upon restarting
+ * the driver.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_PHY_MODE = 62,
+
+ /* 8-bit unsigned value to configure the maximum supported channel width
+ * for STA mode. If this value is configured when STA is in connected
+ * state, it should not exceed the negotiated channel width. If it is
+ * configured when STA is in disconnected state, the configured value
+ * will take effect for the next immediate connection.
+ * Possible values are:
+ * NL80211_CHAN_WIDTH_20
+ * NL80211_CHAN_WIDTH_40
+ * NL80211_CHAN_WIDTH_80
+ * NL80211_CHAN_WIDTH_80P80
+ * NL80211_CHAN_WIDTH_160
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_WIDTH = 63,
+
+ /* 8-bit unsigned value to enable/disable dynamic bandwidth adjustment.
+ * This attribute is only applicable for STA mode. When dynamic
+ * bandwidth adjustment is disabled, STA will use static channel width
+ * the value of which is negotiated during connection.
+ * 1-enable (default), 0-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_DYNAMIC_BW = 64,
+
+ /* 8-bit unsigned value to configure the maximum number of subframes of
+ * TX MSDU for aggregation. Possible values are 0-31. When set to 0,
+ * it is decided by the hardware.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MSDU_AGGREGATION = 65,
+
+ /* 8-bit unsigned value to configure the maximum number of subframes of
+ * RX MSDU for aggregation. Possible values are 0-31. When set to 0,
+ * it is decided by the hardware.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MSDU_AGGREGATION = 66,
+
+ /* 8-bit unsigned value. This attribute is used to dynamically
+ * enable/disable the LDPC capability of the device. When configured in
+ * the disconnected state, the updated configuration will be considered
+ * for the immediately following connection attempt. If this
+ * configuration is modified while the device is in the connected state,
+ * the LDPC TX will be updated with this configuration immediately,
+ * while the LDPC RX configuration update will take place starting from
+ * the subsequent association attempt.
+ * 1-Enable, 0-Disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_LDPC = 67,
+
+ /* 8-bit unsigned value. This attribute is used to dynamically
+ * enable/disable the TX STBC capability of the device. When configured
+ * in the disconnected state, the updated configuration will be
+ * considered for the immediately following connection attempt. If the
+ * connection is formed with TX STBC enabled and if this configuration
+ * is disabled during that association, the TX will be impacted
+ * immediately. Further connection attempts will disable TX STBC.
+ * However, enabling the TX STBC for a connected session with disabled
+ * capability is not allowed and will fail.
+ * 1-Enable, 0-Disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_STBC = 68,
+
+ /* 8-bit unsigned value. This attribute is used to dynamically
+ * enable/disable the RX STBC capability of the device. When configured
+ * in the disconnected state, the updated configuration will be
+ * considered for the immediately following connection attempt. If the
+ * configuration is modified in the connected state, there will be no
+ * impact for the current association, but further connection attempts
+ * will use the updated configuration.
+ * 1-Enable, 0-Disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_STBC = 69,
+
+ /* 8-bit unsigned value. This attribute is used to dynamically configure
+ * the number of spatial streams. When configured in the disconnected
+ * state, the updated configuration will be considered for the
+ * immediately following connection attempt. If the NSS is updated after
+ * the connection, the updated NSS value is notified to the peer using
+ * the Operating Mode Notification/Spatial Multiplexing Power Save
+ * frame. The updated NSS value after the connection shall not be
+ * greater than the one negotiated during the connection. Any such
+ * higher value configuration shall be returned with a failure.
+ * Only symmetric NSS configuration (such as 2X2 or 1X1) can be done
+ * using this attribute. QCA_WLAN_VENDOR_ATTR_CONFIG_TX_NSS and
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_RX_NSS attributes shall be used to
+ * configure the asymmetric NSS configuration (such as 1X2).
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_NSS = 70,
+ /* 8-bit unsigned value to trigger Optimized Power Management:
+ * 1-Enable, 0-Disable
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_OPTIMIZED_POWER_MANAGEMENT = 71,
+
+ /* 8-bit unsigned value. This attribute takes the QoS/access category
+ * value represented by the enum qca_wlan_ac_type and expects the driver
+ * to upgrade the UDP frames to this access category. The value of
+ * QCA_WLAN_AC_ALL is invalid for this attribute. This will override the
+ * DSCP value configured in the frame with the intention to only upgrade
+ * the access category. That said, it is not intended to downgrade the
+ * access category for the frames.
+ * Set the value to QCA_WLAN_AC_BK if the QoS upgrade needs to be
+ * disabled, as BK is of the lowest priority and an upgrade to it does
+ * not result in any changes for the frames.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_UDP_QOS_UPGRADE = 72,
+
+ /* 8-bit unsigned value. This attribute is used to dynamically configure
+ * the number of chains to be used for transmitting data. This
+ * configuration is allowed only when in connected state and will be
+ * effective until disconnected. The driver rejects this configuration
+ * if the number of spatial streams being used in the current connection
+ * cannot be supported by this configuration.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_NUM_TX_CHAINS = 73,
+ /* 8-bit unsigned value. This attribute is used to dynamically configure
+ * the number of chains to be used for receiving data. This
+ * configuration is allowed only when in connected state and will be
+ * effective until disconnected. The driver rejects this configuration
+ * if the number of spatial streams being used in the current connection
+ * cannot be supported by this configuration.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_NUM_RX_CHAINS = 74,
+
+ /* 8-bit unsigned value to configure ANI setting type.
+ * See &enum qca_wlan_ani_setting for possible values.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANI_SETTING = 75,
+ /* 32-bit signed value to configure ANI level. This is used when
+ * ANI settings type is &QCA_WLAN_ANI_SETTING_FIXED.
+ * The set and get of ANI level with &QCA_WLAN_ANI_SETTING_AUTO
+ * is invalid, the driver will return a failure.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANI_LEVEL = 76,
+
+ /* 8-bit unsigned value. This attribute is used to dynamically configure
+ * the number of spatial streams used for transmitting the data. When
+ * configured in the disconnected state, the configured value will
+ * be considered for the following connection attempt.
+ * If the NSS is updated after the connection, the updated NSS value
+ * is notified to the peer using the Operating Mode Notification/Spatial
+ * Multiplexing Power Save frame.
+ * The TX NSS value configured after the connection shall not be greater
+ * than the value negotiated during the connection. Any such higher
+ * value configuration shall be treated as invalid configuration by
+ * the driver. This attribute shall be configured along with
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_RX_NSS attribute to define the symmetric
+ * configuration (such as 2X2 or 1X1) or the asymmetric
+ * configuration (such as 1X2).
+ * If QCA_WLAN_VENDOR_ATTR_CONFIG_NSS attribute is also provided along
+ * with this QCA_WLAN_VENDOR_ATTR_CONFIG_TX_NSS attribute the driver
+ * will update the TX NSS based on QCA_WLAN_VENDOR_ATTR_CONFIG_TX_NSS.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_NSS = 77,
+
+ /* 8-bit unsigned value. This attribute is used to dynamically configure
+ * the number of spatial streams used for receiving the data. When
+ * configured in the disconnected state, the configured value will
+ * be considered for the following connection attempt.
+ * If the NSS is updated after the connection, the updated NSS value
+ * is notified to the peer using the Operating Mode Notification/Spatial
+ * Multiplexing Power Save frame.
+ * The RX NSS value configured after the connection shall not be greater
+ * than the value negotiated during the connection. Any such higher
+ * value configuration shall be treated as invalid configuration by
+ * the driver. This attribute shall be configured along with
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_TX_NSS attribute to define the symmetric
+ * configuration (such as 2X2 or 1X1) or the asymmetric
+ * configuration (such as 1X2).
+ * If QCA_WLAN_VENDOR_ATTR_CONFIG_NSS attribute is also provided along
+ * with this QCA_WLAN_VENDOR_ATTR_CONFIG_RX_NSS attribute the driver
+ * will update the RX NSS based on QCA_WLAN_VENDOR_ATTR_CONFIG_RX_NSS.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_NSS = 78,
+
+ /*
+ * 8-bit unsigned value. This attribute, when set, indicates whether the
+ * specified interface is the primary STA interface when there are more
+ * than one STA interfaces concurrently active.
+ *
+ * This configuration helps the firmware/hardware to support certain
+ * features (e.g., roaming) on this primary interface, if the same
+ * cannot be supported on the concurrent STA interfaces simultaneously.
+ *
+ * This configuration is only applicable for a single STA interface on
+ * a device and gives the priority for it only over other concurrent STA
+ * interfaces.
+ *
+ * If the device is a multi wiphy/soc, this configuration applies to a
+ * single STA interface across the wiphys.
+ *
+ * 1-Enable (is the primary STA), 0-Disable (is not the primary STA)
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_CONCURRENT_STA_PRIMARY = 79,
+
+ /*
+ * 8-bit unsigned value. This attribute can be used to configure the
+ * driver to enable/disable FT-over-DS feature. Possible values for
+ * this attribute are 1-Enable and 0-Disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_FT_OVER_DS = 80,
+
+ /*
+ * 8-bit unsigned value. This attribute can be used to configure the
+ * firmware to enable/disable ARP/NS offload feature. Possible values
+ * for this attribute are 0-Disable and 1-Enable.
+ *
+ * This attribute is only applicable for STA/P2P-Client interface,
+ * and is optional, default behavior is ARP/NS offload enabled.
+ *
+ * This attribute can be set in disconnected and connected state, and
+ * will restore to the default behavior if the interface is closed.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ARP_NS_OFFLOAD = 81,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST - 1,
+};
+
+/* Compatibility defines for previously used incorrect enum
+ * qca_wlan_vendor_attr_config names. These values should not be used in any
+ * new implementation. */
+#define QCA_WLAN_VENDOR_ATTR_DISCONNECT_IES \
+ QCA_WLAN_VENDOR_ATTR_CONFIG_DISCONNECT_IES
+#define QCA_WLAN_VENDOR_ATTR_BEACON_REPORT_FAIL \
+ QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_REPORT_FAIL
+
+/**
+ * enum qca_wlan_ani_setting - ANI setting type
+ * @QCA_WLAN_ANI_SETTING_AUTO: Automatically determine ANI level
+ * @QCA_WLAN_ANI_SETTING_FIXED: Fix ANI level to the dBm parameter
+ */
+enum qca_wlan_ani_setting {
+ QCA_WLAN_ANI_SETTING_AUTO = 0,
+ QCA_WLAN_ANI_SETTING_FIXED = 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_sap_config - Parameters for AP configuration
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL: Optional (u8)
+ * Channel number on which Access Point should restart.
+ * Note: If both the driver and user space application supports the 6 GHz band,
+ * this attribute is deprecated and QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_FREQUENCY
+ * should be used.
+ * To maintain backward compatibility, QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL
+ * is still used if either of the driver or user space application doesn't
+ * support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_FREQUENCY: Optional (u32)
+ * Channel center frequency (MHz) on which the access point should restart.
+ */
+enum qca_wlan_vendor_attr_sap_config {
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL = 1,
+
+ /* List of frequencies on which AP is expected to operate.
+ * This is irrespective of ACS configuration. This list is a priority
+ * based one and is looked for before the AP is created to ensure the
+ * best concurrency sessions (avoid MCC and use DBS/SCC) co-exist in
+ * the system.
+ */
+ QCA_WLAN_VENDOR_ATTR_SAP_MANDATORY_FREQUENCY_LIST = 2,
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_FREQUENCY = 3,
+
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_sap_conditional_chan_switch - Parameters for AP
+ * conditional channel switch
+ */
+enum qca_wlan_vendor_attr_sap_conditional_chan_switch {
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_INVALID = 0,
+ /* Priority based frequency list (an array of u32 values in host byte
+ * order)
+ */
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST = 1,
+ /* Status of the conditional switch (u32).
+ * 0: Success, Non-zero: Failure
+ */
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS = 2,
+
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_MAX =
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_gpio_attr - Parameters for GPIO configuration
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND: Required (u32)
+ * value to specify the GPIO command. Please refer to enum qca_gpio_cmd_type
+ * for the available values.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM: Required (u32)
+ * value to specify the GPIO number.
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG or %QCA_WLAN_VENDOR_GPIO_OUTPUT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE: Required (u32)
+ * value to specify the GPIO output level. Please refer to enum qca_gpio_value
+ * for the available values.
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_OUTPUT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE: Optional (u32)
+ * value to specify the GPIO pull type. Please refer to enum qca_gpio_pull_type
+ * for the available values.
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG and
+ * %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG attribute is not present.
+ * Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG
+ * attribute is present.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE: Optional (u32)
+ * value to specify the GPIO interrupt mode. Please refer to enum
+ * qca_gpio_interrupt_mode for the available values.
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG and
+ * %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG attribute is not present.
+ * Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG
+ * attribute is present.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DIR: Optional (u32)
+ * value to specify the GPIO direction. Please refer to enum qca_gpio_direction
+ * for the available values.
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG and
+ * %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG attribute is not present.
+ * Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG
+ * attribute is present.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MUX_CONFIG: Optional (u32)
+ * Value to specify the mux config. Meaning of a given value is dependent
+ * on the target chipset and GPIO pin. Must be of the range 0-15.
+ * Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG. Defaults to 0.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DRIVE: Optional (u32)
+ * Value to specify the drive, refer to enum qca_gpio_drive.
+ * Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG. Defaults to QCA_WLAN_GPIO_DRIVE_2MA(0).
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG: Optional (flag)
+ * Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG. When present this attribute signals that all
+ * other parameters for the given GPIO will be obtained from internal
+ * configuration. Only %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM must be
+ * specified to indicate the GPIO pin being configured.
+ */
+enum qca_wlan_gpio_attr {
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INVALID = 0,
+ /* Unsigned 32-bit attribute for GPIO command */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND = 1,
+ /* Unsigned 32-bit attribute for GPIO PIN number to configure */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM = 2,
+ /* Unsigned 32-bit attribute for GPIO value to configure */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE = 3,
+ /* Unsigned 32-bit attribute for GPIO pull type */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE = 4,
+ /* Unsigned 32-bit attribute for GPIO interrupt mode */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE = 5,
+ /* Unsigned 32-bit attribute for GPIO direction to configure */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DIR = 6,
+ /* Unsigned 32-bit attribute for GPIO mux config */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MUX_CONFIG = 7,
+ /* Unsigned 32-bit attribute for GPIO drive */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DRIVE = 8,
+ /* Flag attribute for using internal GPIO configuration */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG = 9,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST,
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MAX =
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST - 1
+};
+
+/**
+ * enum gpio_cmd_type - GPIO configuration command type
+ * @QCA_WLAN_VENDOR_GPIO_CONFIG: Set GPIO configuration info
+ * @QCA_WLAN_VENDOR_GPIO_OUTPUT: Set GPIO output level
+ */
+enum qca_gpio_cmd_type {
+ QCA_WLAN_VENDOR_GPIO_CONFIG = 0,
+ QCA_WLAN_VENDOR_GPIO_OUTPUT = 1,
+};
+
+/**
+ * enum qca_gpio_pull_type - GPIO pull type
+ * @QCA_WLAN_GPIO_PULL_NONE: Set GPIO pull type to none
+ * @QCA_WLAN_GPIO_PULL_UP: Set GPIO pull up
+ * @QCA_WLAN_GPIO_PULL_DOWN: Set GPIO pull down
+ */
+enum qca_gpio_pull_type {
+ QCA_WLAN_GPIO_PULL_NONE = 0,
+ QCA_WLAN_GPIO_PULL_UP = 1,
+ QCA_WLAN_GPIO_PULL_DOWN = 2,
+ QCA_WLAN_GPIO_PULL_MAX,
+};
+
+/**
+ * enum qca_gpio_direction - GPIO direction
+ * @QCA_WLAN_GPIO_INPUT: Set GPIO as input mode
+ * @QCA_WLAN_GPIO_OUTPUT: Set GPIO as output mode
+ * @QCA_WLAN_GPIO_VALUE_MAX: Invalid value
+ */
+enum qca_gpio_direction {
+ QCA_WLAN_GPIO_INPUT = 0,
+ QCA_WLAN_GPIO_OUTPUT = 1,
+ QCA_WLAN_GPIO_DIR_MAX,
+};
+
+/**
+ * enum qca_gpio_value - GPIO Value
+ * @QCA_WLAN_GPIO_LEVEL_LOW: set gpio output level to low
+ * @QCA_WLAN_GPIO_LEVEL_HIGH: set gpio output level to high
+ * @QCA_WLAN_GPIO_LEVEL_MAX: Invalid value
+ */
+enum qca_gpio_value {
+ QCA_WLAN_GPIO_LEVEL_LOW = 0,
+ QCA_WLAN_GPIO_LEVEL_HIGH = 1,
+ QCA_WLAN_GPIO_LEVEL_MAX,
+};
+
+/**
+ * enum gpio_interrupt_mode - GPIO interrupt mode
+ * @QCA_WLAN_GPIO_INTMODE_DISABLE: Disable interrupt trigger
+ * @QCA_WLAN_GPIO_INTMODE_RISING_EDGE: Interrupt with GPIO rising edge trigger
+ * @QCA_WLAN_GPIO_INTMODE_FALLING_EDGE: Interrupt with GPIO falling edge trigger
+ * @QCA_WLAN_GPIO_INTMODE_BOTH_EDGE: Interrupt with GPIO both edge trigger
+ * @QCA_WLAN_GPIO_INTMODE_LEVEL_LOW: Interrupt with GPIO level low trigger
+ * @QCA_WLAN_GPIO_INTMODE_LEVEL_HIGH: Interrupt with GPIO level high trigger
+ * @QCA_WLAN_GPIO_INTMODE_MAX: Invalid value
+ */
+enum qca_gpio_interrupt_mode {
+ QCA_WLAN_GPIO_INTMODE_DISABLE = 0,
+ QCA_WLAN_GPIO_INTMODE_RISING_EDGE = 1,
+ QCA_WLAN_GPIO_INTMODE_FALLING_EDGE = 2,
+ QCA_WLAN_GPIO_INTMODE_BOTH_EDGE = 3,
+ QCA_WLAN_GPIO_INTMODE_LEVEL_LOW = 4,
+ QCA_WLAN_GPIO_INTMODE_LEVEL_HIGH = 5,
+ QCA_WLAN_GPIO_INTMODE_MAX,
+};
+
+/**
+ * enum qca_gpio_drive - GPIO drive
+ * @QCA_WLAN_GPIO_DRIVE_2MA: drive 2MA
+ * @QCA_WLAN_GPIO_DRIVE_4MA: drive 4MA
+ * @QCA_WLAN_GPIO_DRIVE_6MA: drive 6MA
+ * @QCA_WLAN_GPIO_DRIVE_8MA: drive 8MA
+ * @QCA_WLAN_GPIO_DRIVE_10MA: drive 10MA
+ * @QCA_WLAN_GPIO_DRIVE_12MA: drive 12MA
+ * @QCA_WLAN_GPIO_DRIVE_14MA: drive 14MA
+ * @QCA_WLAN_GPIO_DRIVE_16MA: drive 16MA
+ * @QCA_WLAN_GPIO_DRIVE_MAX: invalid GPIO drive
+ */
+enum qca_gpio_drive {
+ QCA_WLAN_GPIO_DRIVE_2MA = 0,
+ QCA_WLAN_GPIO_DRIVE_4MA = 1,
+ QCA_WLAN_GPIO_DRIVE_6MA = 2,
+ QCA_WLAN_GPIO_DRIVE_8MA = 3,
+ QCA_WLAN_GPIO_DRIVE_10MA = 4,
+ QCA_WLAN_GPIO_DRIVE_12MA = 5,
+ QCA_WLAN_GPIO_DRIVE_14MA = 6,
+ QCA_WLAN_GPIO_DRIVE_16MA = 7,
+ QCA_WLAN_GPIO_DRIVE_MAX,
+};
+
+/**
+ * qca_wlan_set_qdepth_thresh_attr - Parameters for setting
+ * MSDUQ depth threshold per peer per tid in the target
+ *
+ * Associated Vendor Command:
+ * QCA_NL80211_VENDOR_SUBCMD_SET_QDEPTH_THRESH
+ */
+enum qca_wlan_set_qdepth_thresh_attr {
+ QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_INVALID = 0,
+ /* 6-byte MAC address */
+ QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_MAC_ADDR,
+ /* Unsigned 32-bit attribute for holding the TID */
+ QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_TID,
+ /* Unsigned 32-bit attribute for holding the update mask
+ * bit 0 - Update high priority msdu qdepth threshold
+ * bit 1 - Update low priority msdu qdepth threshold
+ * bit 2 - Update UDP msdu qdepth threshold
+ * bit 3 - Update Non UDP msdu qdepth threshold
+ * rest of bits are reserved
+ */
+ QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_UPDATE_MASK,
+ /* Unsigned 32-bit attribute for holding the threshold value */
+ QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_VALUE,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_LAST,
+ QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_MAX =
+ QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_LAST - 1,
+};
+
+/**
+ * enum qca_acs_dfs_mode - Defines different types of DFS channel
+ * configurations for ACS operation.
+ *
+ * @QCA_ACS_DFS_MODE_NONE: Refer to invalid DFS mode
+ * @QCA_ACS_DFS_MODE_ENABLE: Consider DFS channels in ACS operation
+ * @QCA_ACS_DFS_MODE_DISABLE: Do not consider DFS channels in ACS operation
+ * @QCA_ACS_DFS_MODE_DEPRIORITIZE: Deprioritize DFS channels in ACS operation
+ */
+enum qca_acs_dfs_mode {
+ QCA_ACS_DFS_MODE_NONE = 0,
+ QCA_ACS_DFS_MODE_ENABLE = 1,
+ QCA_ACS_DFS_MODE_DISABLE = 2,
+ QCA_ACS_DFS_MODE_DEPRIORITIZE = 3,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_acs_config - Defines Configuration attributes
+ * used by the vendor command QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_DFS_MODE: Required (u8)
+ * DFS mode for ACS operation from enum qca_acs_dfs_mode.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT: Required (u8)
+ * channel number hint for ACS operation, if valid channel is specified then
+ * ACS operation gives priority to this channel.
+ * Note: If both the driver and user space application supports the 6 GHz band,
+ * this attribute is deprecated and QCA_WLAN_VENDOR_ATTR_ACS_FREQUENCY_HINT
+ * should be used.
+ * To maintain backward compatibility, QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT
+ * is still used if either of the driver or user space application doesn't
+ * support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_FREQUENCY_HINT: Required (u32).
+ * Channel center frequency (MHz) hint for ACS operation, if a valid center
+ * frequency is specified, ACS operation gives priority to this channel.
+ */
+enum qca_wlan_vendor_attr_acs_config {
+ QCA_WLAN_VENDOR_ATTR_ACS_MODE_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_ACS_DFS_MODE = 1,
+ QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT = 2,
+ QCA_WLAN_VENDOR_ATTR_ACS_FREQUENCY_HINT = 3,
+
+ QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ACS_DFS_MAX =
+ QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_get_hw_capability - Wi-Fi hardware capability
+ */
+enum qca_wlan_vendor_attr_get_hw_capability {
+ QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_INVALID,
+ /* Antenna isolation
+ * An attribute used in the response.
+ * The content of this attribute is encoded in a byte array. Each byte
+ * value is an antenna isolation value. The array length is the number
+ * of antennas.
+ */
+ QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION,
+ /* Request HW capability
+ * An attribute used in the request.
+ * The content of this attribute is a u32 array for one or more of
+ * hardware capabilities (attribute IDs) that are being requested. Each
+ * u32 value has a value from this
+ * enum qca_wlan_vendor_attr_get_hw_capability
+ * identifying which capabilities are requested.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_HW_CAPABILITY,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_MAX =
+ QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ll_stats_ext - Attributes for MAC layer monitoring
+ * offload which is an extension for LL_STATS.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD: Monitoring period. Unit in ms.
+ * If MAC counters do not exceed the threshold, FW will report monitored
+ * link layer counters periodically as this setting. The first report is
+ * always triggered by this timer.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD: It is a percentage (1-99).
+ * For each MAC layer counter, FW holds two copies. One is the current value.
+ * The other is the last report. Once a current counter's increment is larger
+ * than the threshold, FW will indicate that counter to host even if the
+ * monitoring timer does not expire.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG: Peer STA power state change
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID: TID of MSDU
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU: Count of MSDU with the same
+ * failure code.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS: TX failure code
+ * 1: TX packet discarded
+ * 2: No ACK
+ * 3: Postpone
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_MAC_ADDRESS: peer MAC address
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_STATE: Peer STA current state
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_GLOBAL: Global threshold.
+ * Threshold for all monitored parameters. If per counter dedicated threshold
+ * is not enabled, this threshold will take effect.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_EVENT_MODE: Indicate what triggers this
+ * event, PERORID_TIMEOUT == 1, THRESH_EXCEED == 0.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_ID: interface ID
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ID: peer ID
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BITMAP: bitmap for TX counters
+ * Bit0: TX counter unit in MSDU
+ * Bit1: TX counter unit in MPDU
+ * Bit2: TX counter unit in PPDU
+ * Bit3: TX counter unit in byte
+ * Bit4: Dropped MSDUs
+ * Bit5: Dropped Bytes
+ * Bit6: MPDU retry counter
+ * Bit7: MPDU failure counter
+ * Bit8: PPDU failure counter
+ * Bit9: MPDU aggregation counter
+ * Bit10: MCS counter for ACKed MPDUs
+ * Bit11: MCS counter for Failed MPDUs
+ * Bit12: TX Delay counter
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BITMAP: bitmap for RX counters
+ * Bit0: MAC RX counter unit in MPDU
+ * Bit1: MAC RX counter unit in byte
+ * Bit2: PHY RX counter unit in PPDU
+ * Bit3: PHY RX counter unit in byte
+ * Bit4: Disorder counter
+ * Bit5: Retry counter
+ * Bit6: Duplication counter
+ * Bit7: Discard counter
+ * Bit8: MPDU aggregation size counter
+ * Bit9: MCS counter
+ * Bit10: Peer STA power state change (wake to sleep) counter
+ * Bit11: Peer STA power save counter, total time in PS mode
+ * Bit12: Probe request counter
+ * Bit13: Other management frames counter
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS_BITMAP: bitmap for CCA
+ * Bit0: Idle time
+ * Bit1: TX time
+ * Bit2: time RX in current bss
+ * Bit3: Out of current bss time
+ * Bit4: Wireless medium busy time
+ * Bit5: RX in bad condition time
+ * Bit6: TX in bad condition time
+ * Bit7: time wlan card not available
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_SIGNAL_BITMAP: bitmap for signal
+ * Bit0: Per channel SNR counter
+ * Bit1: Per channel noise floor counter
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_NUM: number of peers
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CHANNEL_NUM: number of channels
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_AC_RX_NUM: number of RX stats
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS: per channel BSS CCA stats
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER: container for per PEER stats
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MSDU: Number of total TX MSDUs
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MPDU: Number of total TX MPDUs
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_PPDU: Number of total TX PPDUs
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BYTES: bytes of TX data
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP: Number of dropped TX packets
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP_BYTES: Bytes dropped
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_RETRY: waiting time without an ACK
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_ACK: number of MPDU not-ACKed
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_BACK: number of PPDU not-ACKed
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR_NUM:
+ * aggregation stats buffer length
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS_NUM: length of mcs stats
+ * buffer for ACKed MPDUs.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS_NUM: length of mcs stats
+ * buffer for failed MPDUs.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_DELAY_ARRAY_SIZE:
+ * length of delay stats array.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR: TX aggregation stats
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS: MCS stats for ACKed MPDUs
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS: MCS stats for failed MPDUs
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DELAY: tx delay stats
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU: MPDUs received
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_BYTES: bytes received
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU: PPDU received
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU_BYTES: PPDU bytes received
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_LOST: packets lost
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_RETRY: number of RX packets
+ * flagged as retransmissions
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DUP: number of RX packets
+ * flagged as duplicated
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DISCARD: number of RX
+ * packets discarded
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR_NUM: length of RX aggregation
+ * stats buffer.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS_NUM: length of RX mcs
+ * stats buffer.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS: RX mcs stats buffer
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR: aggregation stats buffer
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_TIMES: times STAs go to sleep
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_DURATION: STAs' total sleep time
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PROBE_REQ: number of probe
+ * requests received
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MGMT: number of other mgmt
+ * frames received
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IDLE_TIME: Percentage of idle time
+ * there is no TX, nor RX, nor interference.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_TIME: percentage of time
+ * transmitting packets.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_TIME: percentage of time
+ * for receiving.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BUSY: percentage of time
+ * interference detected.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BAD: percentage of time
+ * receiving packets with errors.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BAD: percentage of time
+ * TX no-ACK.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NO_AVAIL: percentage of time
+ * the chip is unable to work in normal conditions.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IN_BSS_TIME: percentage of time
+ * receiving packets in current BSS.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_OUT_BSS_TIME: percentage of time
+ * receiving packets not in current BSS.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ANT_NUM: number of antennas
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_SIGNAL:
+ * This is a container for per antenna signal stats.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_SNR: per antenna SNR value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_NF: per antenna NF value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_RSSI_BEACON: RSSI of beacon
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_SNR_BEACON: SNR of beacon
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_REPORT_TIME: u64
+ * Absolute timestamp from 1970/1/1, unit in ms. After receiving the
+ * message, user layer APP could call gettimeofday to get another
+ * timestamp and calculate transfer delay for the message.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MEASUREMENT_TIME: u32
+ * Real period for this measurement, unit in us.
+ */
+enum qca_wlan_vendor_attr_ll_stats_ext {
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_INVALID = 0,
+
+ /* Attributes for configurations */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD,
+
+ /* Peer STA power state change */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG,
+
+ /* TX failure event */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_STATE,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_MAC_ADDRESS,
+
+ /* MAC counters */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_GLOBAL,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_EVENT_MODE,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_ID,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ID,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BITMAP,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BITMAP,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS_BITMAP,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_SIGNAL_BITMAP,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_NUM,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CHANNEL_NUM,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER,
+
+ /* Sub-attributes for PEER_AC_TX */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MSDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MPDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_PPDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BYTES,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP_BYTES,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_RETRY,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_ACK,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_BACK,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR_NUM,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS_NUM,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS_NUM,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_DELAY_ARRAY_SIZE,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DELAY,
+
+ /* Sub-attributes for PEER_AC_RX */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_BYTES,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU_BYTES,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_LOST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_RETRY,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DUP,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DISCARD,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR_NUM,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS_NUM,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_TIMES,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_DURATION,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PROBE_REQ,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MGMT,
+
+ /* Sub-attributes for CCA_BSS */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IDLE_TIME,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_TIME,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_TIME,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BUSY,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BAD,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BAD,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NO_AVAIL,
+
+ /* sub-attribute for BSS_RX_TIME */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IN_BSS_TIME,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_OUT_BSS_TIME,
+
+ /* Sub-attributes for PEER_SIGNAL */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ANT_NUM,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_SIGNAL,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_SNR,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_NF,
+
+ /* Sub-attributes for IFACE_BSS */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_RSSI_BEACON,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_SNR_BEACON,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_REPORT_TIME,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MEASUREMENT_TIME,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MAX =
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST - 1
+};
+
+/* Attributes for FTM commands and events */
+
+/**
+ * enum qca_wlan_vendor_attr_loc_capa - Indoor location capabilities
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS: Various flags. See
+ * enum qca_wlan_vendor_attr_loc_capa_flags.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS: Maximum number
+ * of measurement sessions that can run concurrently.
+ * Default is one session (no session concurrency).
+ * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS: The total number of unique
+ * peers that are supported in running sessions. For example,
+ * if the value is 8 and maximum number of sessions is 2, you can
+ * have one session with 8 unique peers, or 2 sessions with 4 unique
+ * peers each, and so on.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP: Maximum number
+ * of bursts per peer, as an exponent (2^value). Default is 0,
+ * meaning no multi-burst support.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST: Maximum number
+ * of measurement exchanges allowed in a single burst.
+ * @QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES: Supported AOA measurement
+ * types. A bit mask (unsigned 32 bit value), each bit corresponds
+ * to an AOA type as defined by enum qca_vendor_attr_aoa_type.
+ */
+enum qca_wlan_vendor_attr_loc_capa {
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_INVALID,
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS,
+ QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS,
+ QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS,
+ QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP,
+ QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST,
+ QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_MAX =
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_loc_capa_flags: Indoor location capability flags
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER: Set if driver
+ * can be configured as an FTM responder (for example, an AP that
+ * services FTM requests). QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER
+ * will be supported if set.
+ * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR: Set if driver
+ * can run FTM sessions. QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION
+ * will be supported if set.
+ * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP: Set if FTM responder
+ * supports immediate (ASAP) response.
+ * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA: Set if driver supports standalone
+ * AOA measurement using QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS.
+ * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM: Set if driver supports
+ * requesting AOA measurements as part of an FTM session.
+ */
+enum qca_wlan_vendor_attr_loc_capa_flags {
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER = 1 << 0,
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR = 1 << 1,
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP = 1 << 2,
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA = 1 << 3,
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM = 1 << 4,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ftm_peer_info: Information about
+ * a single peer in a measurement session.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR: The MAC address of the peer.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS: Various flags related
+ * to measurement. See enum qca_wlan_vendor_attr_ftm_peer_meas_flags.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS: Nested attribute of
+ * FTM measurement parameters, as specified by IEEE P802.11-REVmc/D7.0
+ * 9.4.2.167. See enum qca_wlan_vendor_attr_ftm_meas_param for
+ * list of supported attributes.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID: Initial token ID for
+ * secure measurement.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD: Request AOA
+ * measurement every <value> bursts. If 0 or not specified,
+ * AOA measurements will be disabled for this peer.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_FREQ: Frequency in MHz where
+ * the measurement frames are exchanged. Optional; if not
+ * specified, try to locate the peer in the kernel scan
+ * results cache and use frequency from there.
+ */
+enum qca_wlan_vendor_attr_ftm_peer_info {
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_INVALID,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_FREQ,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAX =
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ftm_peer_meas_flags: Measurement request flags,
+ * per-peer
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP: If set, request
+ * immediate (ASAP) response from peer.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI: If set, request
+ * LCI report from peer. The LCI report includes the absolute
+ * location of the peer in "official" coordinates (similar to GPS).
+ * See IEEE P802.11-REVmc/D7.0, 11.24.6.7 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR: If set, request
+ * Location civic report from peer. The LCR includes the location
+ * of the peer in free-form format. See IEEE P802.11-REVmc/D7.0,
+ * 11.24.6.7 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE: If set,
+ * request a secure measurement.
+ * QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID must also be provided.
+ */
+enum qca_wlan_vendor_attr_ftm_peer_meas_flags {
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP = 1 << 0,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI = 1 << 1,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR = 1 << 2,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE = 1 << 3,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ftm_meas_param: Measurement parameters
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST: Number of measurements
+ * to perform in a single burst.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP: Number of bursts to
+ * perform, specified as an exponent (2^value).
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION: Duration of burst
+ * instance, as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD: Time between bursts,
+ * as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167. Must
+ * be larger than QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION.
+ */
+enum qca_wlan_vendor_attr_ftm_meas_param {
+ QCA_WLAN_VENDOR_ATTR_FTM_PARAM_INVALID,
+ QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST,
+ QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP,
+ QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION,
+ QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MAX =
+ QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ftm_peer_result: Per-peer results
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR: MAC address of the reported
+ * peer.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS: Status of measurement
+ * request for this peer.
+ * See enum qca_wlan_vendor_attr_ftm_peer_result_status.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS: Various flags related
+ * to measurement results for this peer.
+ * See enum qca_wlan_vendor_attr_ftm_peer_result_flags.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS: Specified when
+ * request failed and peer requested not to send an additional request
+ * for this number of seconds.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI: LCI report when received
+ * from peer. In the format specified by IEEE P802.11-REVmc/D7.0,
+ * 9.4.2.22.10.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR: Location civic report when
+ * received from peer. In the format specified by IEEE P802.11-REVmc/D7.0,
+ * 9.4.2.22.13.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS: Reported when peer
+ * overridden some measurement request parameters. See
+ * enum qca_wlan_vendor_attr_ftm_meas_param.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS: AOA measurement
+ * for this peer. Same contents as @QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS: Array of measurement
+ * results. Each entry is a nested attribute defined
+ * by enum qca_wlan_vendor_attr_ftm_meas.
+ */
+enum qca_wlan_vendor_attr_ftm_peer_result {
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_INVALID,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAX =
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ftm_peer_result_status
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK: Request sent ok and results
+ * will be provided. Peer may have overridden some measurement parameters,
+ * in which case overridden parameters will be report by
+ * QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAM attribute.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE: Peer is incapable
+ * of performing the measurement request. No more results will be sent
+ * for this peer in this session.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED: Peer reported request
+ * failed, and requested not to send an additional request for number
+ * of seconds specified by QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS
+ * attribute.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID: Request validation
+ * failed. Request was not sent over the air.
+ */
+enum qca_wlan_vendor_attr_ftm_peer_result_status {
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ftm_peer_result_flags: Various flags
+ * for measurement result, per-peer
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE: If set,
+ * measurement completed for this peer. No more results will be reported
+ * for this peer in this session.
+ */
+enum qca_wlan_vendor_attr_ftm_peer_result_flags {
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE = 1 << 0,
+};
+
+/**
+ * enum qca_vendor_attr_loc_session_status: Session completion status code
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK: Session completed
+ * successfully.
+ * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED: Session aborted
+ * by request.
+ * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID: Session request
+ * was invalid and was not started.
+ * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED: Session had an error
+ * and did not complete normally (for example out of resources).
+ */
+enum qca_vendor_attr_loc_session_status {
+ QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK,
+ QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED,
+ QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID,
+ QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ftm_meas: Single measurement data
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1: Time of departure (TOD) of FTM packet as
+ * recorded by responder, in picoseconds.
+ * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2: Time of arrival (TOA) of FTM packet at
+ * initiator, in picoseconds.
+ * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3: TOD of ACK packet as recorded by
+ * initiator, in picoseconds.
+ * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4: TOA of ACK packet at
+ * responder, in picoseconds.
+ * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI: RSSI (signal level) as recorded
+ * during this measurement exchange. Optional and will be provided if
+ * the hardware can measure it.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR: TOD error reported by
+ * responder. Not always provided.
+ * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR: TOA error reported by
+ * responder. Not always provided.
+ * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR: TOD error measured by
+ * initiator. Not always provided.
+ * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR: TOA error measured by
+ * initiator. Not always provided.
+ * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD: Dummy attribute for padding.
+ */
+enum qca_wlan_vendor_attr_ftm_meas {
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INVALID,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_MAX =
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_aoa_type - AOA measurement type
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: Phase of the strongest
+ * CIR (channel impulse response) path for each antenna.
+ * @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: Phase and amplitude
+ * of the strongest CIR path for each antenna.
+ */
+enum qca_wlan_vendor_attr_aoa_type {
+ QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE,
+ QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP,
+ QCA_WLAN_VENDOR_ATTR_AOA_TYPE_MAX
+};
+
+/**
+ * enum qca_wlan_vendor_attr_encryption_test - Attributes to
+ * validate encryption engine
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION: Flag attribute.
+ * This will be included if the request is for decryption; if not included,
+ * the request is treated as a request for encryption by default.
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER: Unsigned 32-bit value
+ * indicating the key cipher suite. Takes same values as
+ * NL80211_ATTR_KEY_CIPHER.
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID: Unsigned 8-bit value
+ * Key Id to be used for encryption
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK: Array of 8-bit values.
+ * Key (TK) to be used for encryption/decryption
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN: Array of 8-bit values.
+ * Packet number to be specified for encryption/decryption
+ * 6 bytes for TKIP/CCMP/GCMP.
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA: Array of 8-bit values
+ * representing the 802.11 packet (header + payload + FCS) that
+ * needs to be encrypted/decrypted.
+ * Encrypted/decrypted response from the driver will also be sent
+ * to userspace with the same attribute.
+ */
+enum qca_wlan_vendor_attr_encryption_test {
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_MAX =
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_dmg_rf_sector_type - Type of
+ * sector for DMG RF sector operations.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_RX: RX sector
+ * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_TX: TX sector
+ */
+enum qca_wlan_vendor_attr_dmg_rf_sector_type {
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_RX,
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_TX,
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_MAX
+};
+
+/**
+ * enum qca_wlan_vendor_attr_fw_state - State of firmware
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FW_STATE_ERROR: FW is in bad state
+ * @QCA_WLAN_VENDOR_ATTR_FW_STATE_ACTIVE: FW is active
+ */
+enum qca_wlan_vendor_attr_fw_state {
+ QCA_WLAN_VENDOR_ATTR_FW_STATE_ERROR,
+ QCA_WLAN_VENDOR_ATTR_FW_STATE_ACTIVE,
+ QCA_WLAN_VENDOR_ATTR_FW_STATE_MAX
+};
+
+/**
+ * BRP antenna limit mode
+ *
+ * @QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_DISABLE: Disable BRP force
+ * antenna limit, BRP will be performed as usual.
+ * @QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_EFFECTIVE: Define maximal
+ * antennas limit. the hardware may use less antennas than the
+ * maximum limit.
+ * @QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_FORCE: The hardware will
+ * use exactly the specified number of antennas for BRP.
+ */
+enum qca_wlan_vendor_attr_brp_ant_limit_mode {
+ QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_DISABLE,
+ QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_EFFECTIVE,
+ QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_FORCE,
+ QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_MAX
+};
+
+/**
+ * enum qca_wlan_vendor_attr_dmg_rf_sector_cfg - Attributes for
+ * DMG RF sector configuration for a single RF module.
+ * The values are defined in a compact way which closely matches
+ * the way it is stored in HW registers.
+ * The configuration provides values for 32 antennas and 8 distribution
+ * amplifiers, and together describes the characteristics of the RF
+ * sector - such as a beam in some direction with some gain.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX: Index
+ * of RF module for this configuration.
+ * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE0: Bit 0 of edge
+ * amplifier gain index. Unsigned 32 bit number containing
+ * bits for all 32 antennas.
+ * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE1: Bit 1 of edge
+ * amplifier gain index. Unsigned 32 bit number containing
+ * bits for all 32 antennas.
+ * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE2: Bit 2 of edge
+ * amplifier gain index. Unsigned 32 bit number containing
+ * bits for all 32 antennas.
+ * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_HI: Phase values
+ * for first 16 antennas, 2 bits per antenna.
+ * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_LO: Phase values
+ * for last 16 antennas, 2 bits per antenna.
+ * @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16: Contains
+ * DTYPE values (3 bits) for each distribution amplifier, followed
+ * by X16 switch bits for each distribution amplifier. There are
+ * total of 8 distribution amplifiers.
+ */
+enum qca_wlan_vendor_attr_dmg_rf_sector_cfg {
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX = 1,
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE0 = 2,
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE1 = 3,
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE2 = 4,
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_HI = 5,
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_LO = 6,
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16 = 7,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MAX =
+ QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_AFTER_LAST - 1
+};
+
+enum qca_wlan_vendor_attr_ll_stats_set {
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_INVALID = 0,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_MPDU_SIZE_THRESHOLD = 1,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_AGGRESSIVE_STATS_GATHERING = 2,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_MAX =
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST - 1,
+};
+
+enum qca_wlan_vendor_attr_ll_stats_clr {
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_INVALID = 0,
+ /* Unsigned 32bit bitmap for clearing statistics
+ * All radio statistics 0x00000001
+ * cca_busy_time (within radio statistics) 0x00000002
+ * All channel stats (within radio statistics) 0x00000004
+ * All scan statistics (within radio statistics) 0x00000008
+ * All interface statistics 0x00000010
+ * All tx rate statistics (within interface statistics) 0x00000020
+ * All ac statistics (with in interface statistics) 0x00000040
+ * All contention (min, max, avg) statistics (within ac statisctics)
+ * 0x00000080.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_REQ_MASK = 1,
+ /* Unsigned 8 bit value: Request to stop statistics collection */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_REQ = 2,
+
+ /* Unsigned 32 bit bitmap: Response from the driver
+ * for the cleared statistics
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_RSP_MASK = 3,
+ /* Unsigned 8 bit value: Response from driver/firmware
+ * for the stop request
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_RSP = 4,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_MAX =
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST - 1,
+};
+
+enum qca_wlan_vendor_attr_ll_stats_get {
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_INVALID = 0,
+ /* Unsigned 32 bit value provided by the caller issuing the GET stats
+ * command. When reporting the stats results, the driver uses the same
+ * value to indicate which GET request the results correspond to.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_ID = 1,
+ /* Unsigned 32 bit value - bit mask to identify what statistics are
+ * requested for retrieval.
+ * Radio Statistics 0x00000001
+ * Interface Statistics 0x00000020
+ * All Peer Statistics 0x00000040
+ * Peer Statistics 0x00000080
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_MASK = 2,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_MAX =
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST - 1,
+};
+
+enum qca_wlan_vendor_attr_ll_stats_results {
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_INVALID = 0,
+ /* Unsigned 32bit value. Used by the driver; must match the request id
+ * provided with the QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET command.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_REQ_ID = 1,
+
+ /* Unsigned 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_BEACON_RX = 2,
+ /* Unsigned 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_RX = 3,
+ /* Unsigned 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_RX = 4,
+ /* Unsigned 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_TX = 5,
+ /* Signed 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_MGMT = 6,
+ /* Signed 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_DATA = 7,
+ /* Signed 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_ACK = 8,
+
+ /* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_* are
+ * nested within the interface stats.
+ */
+
+ /* Interface mode, e.g., STA, SOFTAP, IBSS, etc.
+ * Type = enum wifi_interface_mode.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MODE = 9,
+ /* Interface MAC address. An array of 6 Unsigned int8 */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MAC_ADDR = 10,
+ /* Type = enum wifi_connection_state, e.g., DISCONNECTED,
+ * AUTHENTICATING, etc. valid for STA, CLI only.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_STATE = 11,
+ /* Type = enum wifi_roam_state. Roaming state, e.g., IDLE or ACTIVE
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_ROAMING = 12,
+ /* Unsigned 32 bit value. WIFI_CAPABILITY_XXX */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_CAPABILITIES = 13,
+ /* NULL terminated SSID. An array of 33 Unsigned 8bit values */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_SSID = 14,
+ /* BSSID. An array of 6 unsigned 8 bit values */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_BSSID = 15,
+ /* Country string advertised by AP. An array of 3 unsigned 8 bit
+ * values.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_AP_COUNTRY_STR = 16,
+ /* Country string for this association. An array of 3 unsigned 8 bit
+ * values.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_COUNTRY_STR = 17,
+
+ /* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_* could
+ * be nested within the interface stats.
+ */
+
+ /* Type = enum wifi_traffic_ac, e.g., V0, VI, BE and BK */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_AC = 18,
+ /* Unsigned int 32 value corresponding to respective AC */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MPDU = 19,
+ /* Unsigned int 32 value corresponding to respective AC */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MPDU = 20,
+ /* Unsigned int 32 value corresponding to respective AC */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MCAST = 21,
+ /* Unsigned int 32 value corresponding to respective AC */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MCAST = 22,
+ /* Unsigned int 32 value corresponding to respective AC */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_AMPDU = 23,
+ /* Unsigned int 32 value corresponding to respective AC */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_AMPDU = 24,
+ /* Unsigned int 32 value corresponding to respective AC */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_MPDU_LOST = 25,
+ /* Unsigned int 32 value corresponding to respective AC */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES = 26,
+ /* Unsigned int 32 value corresponding to respective AC */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_SHORT = 27,
+ /* Unsigned int 32 values corresponding to respective AC */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_LONG = 28,
+ /* Unsigned int 32 values corresponding to respective AC */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MIN = 29,
+ /* Unsigned int 32 values corresponding to respective AC */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MAX = 30,
+ /* Unsigned int 32 values corresponding to respective AC */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_AVG = 31,
+ /* Unsigned int 32 values corresponding to respective AC */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_NUM_SAMPLES = 32,
+ /* Unsigned 32 bit value. Number of peers */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_NUM_PEERS = 33,
+
+ /* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_* are
+ * nested within the interface stats.
+ */
+
+ /* Type = enum wifi_peer_type. Peer type, e.g., STA, AP, P2P GO etc. */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_TYPE = 34,
+ /* MAC addr corresponding to respective peer. An array of 6 unsigned
+ * 8 bit values.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_MAC_ADDRESS = 35,
+ /* Unsigned int 32 bit value representing capabilities corresponding
+ * to respective peer.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_CAPABILITIES = 36,
+ /* Unsigned 32 bit value. Number of rates */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_NUM_RATES = 37,
+
+ /* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_*
+ * are nested within the rate stat.
+ */
+
+ /* Wi-Fi Rate - separate attributes defined for individual fields */
+
+ /* Unsigned int 8 bit value; 0: OFDM, 1:CCK, 2:HT 3:VHT 4..7 reserved */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_PREAMBLE = 38,
+ /* Unsigned int 8 bit value; 0:1x1, 1:2x2, 3:3x3, 4:4x4 */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_NSS = 39,
+ /* Unsigned int 8 bit value; 0:20 MHz, 1:40 MHz, 2:80 MHz, 3:160 MHz */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BW = 40,
+ /* Unsigned int 8 bit value; OFDM/CCK rate code would be as per IEEE Std
+ * in the units of 0.5 Mbps HT/VHT it would be MCS index
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MCS_INDEX = 41,
+
+ /* Unsigned 32 bit value. Bit rate in units of 100 kbps */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BIT_RATE = 42,
+
+ /* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_STAT_* could be
+ * nested within the peer info stats.
+ */
+
+ /* Unsigned int 32 bit value. Number of successfully transmitted data
+ * packets, i.e., with ACK received corresponding to the respective
+ * rate.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_TX_MPDU = 43,
+ /* Unsigned int 32 bit value. Number of received data packets
+ * corresponding to the respective rate.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RX_MPDU = 44,
+ /* Unsigned int 32 bit value. Number of data packet losses, i.e., no ACK
+ * received corresponding to the respective rate.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MPDU_LOST = 45,
+ /* Unsigned int 32 bit value. Total number of data packet retries for
+ * the respective rate.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES = 46,
+ /* Unsigned int 32 bit value. Total number of short data packet retries
+ * for the respective rate.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_SHORT = 47,
+ /* Unsigned int 32 bit value. Total number of long data packet retries
+ * for the respective rate.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_LONG = 48,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ID = 49,
+ /* Unsigned 32 bit value. Total number of msecs the radio is awake
+ * accruing over time.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME = 50,
+ /* Unsigned 32 bit value. Total number of msecs the radio is
+ * transmitting accruing over time.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME = 51,
+ /* Unsigned 32 bit value. Total number of msecs the radio is in active
+ * receive accruing over time.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_RX_TIME = 52,
+ /* Unsigned 32 bit value. Total number of msecs the radio is awake due
+ * to all scan accruing over time.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_SCAN = 53,
+ /* Unsigned 32 bit value. Total number of msecs the radio is awake due
+ * to NAN accruing over time.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_NBD = 54,
+ /* Unsigned 32 bit value. Total number of msecs the radio is awake due
+ * to GSCAN accruing over time.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_GSCAN = 55,
+ /* Unsigned 32 bit value. Total number of msecs the radio is awake due
+ * to roam scan accruing over time.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_ROAM_SCAN = 56,
+ /* Unsigned 32 bit value. Total number of msecs the radio is awake due
+ * to PNO scan accruing over time.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_PNO_SCAN = 57,
+ /* Unsigned 32 bit value. Total number of msecs the radio is awake due
+ * to Hotspot 2.0 scans and GAS exchange accruing over time.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_HS20 = 58,
+ /* Unsigned 32 bit value. Number of channels. */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_CHANNELS = 59,
+
+ /* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_* could
+ * be nested within the channel stats.
+ */
+
+ /* Type = enum wifi_channel_width. Channel width, e.g., 20, 40, 80 */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_WIDTH = 60,
+ /* Unsigned 32 bit value. Primary 20 MHz channel. */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ = 61,
+ /* Unsigned 32 bit value. Center frequency (MHz) first segment. */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ0 = 62,
+ /* Unsigned 32 bit value. Center frequency (MHz) second segment. */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ1 = 63,
+
+ /* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_* could be
+ * nested within the radio stats.
+ */
+
+ /* Unsigned int 32 bit value representing total number of msecs the
+ * radio is awake on that channel accruing over time, corresponding to
+ * the respective channel.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_ON_TIME = 64,
+ /* Unsigned int 32 bit value representing total number of msecs the CCA
+ * register is busy accruing over time corresponding to the respective
+ * channel.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_CCA_BUSY_TIME = 65,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_NUM_RADIOS = 66,
+
+ /* Signifies the nested list of channel attributes
+ * QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_*
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO = 67,
+
+ /* Signifies the nested list of peer info attributes
+ * QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_*
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO = 68,
+
+ /* Signifies the nested list of rate info attributes
+ * QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_*
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_RATE_INFO = 69,
+
+ /* Signifies the nested list of wmm info attributes
+ * QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_*
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_INFO = 70,
+
+ /* Unsigned 8 bit value. Used by the driver; if set to 1, it indicates
+ * that more stats, e.g., peers or radio, are to follow in the next
+ * QCA_NL80211_VENDOR_SUBCMD_LL_STATS_*_RESULTS event.
+ * Otherwise, it is set to 0.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_MORE_DATA = 71,
+
+ /* Unsigned 64 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_AVERAGE_TSF_OFFSET = 72,
+
+ /* Unsigned 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_DETECTED = 73,
+
+ /* Unsigned 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_AVG_NUM_FRAMES_LEAKED = 74,
+
+ /* Unsigned 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_GUARD_TIME = 75,
+
+ /* Unsigned 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE = 76,
+
+ /* Unsigned 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_TX_LEVELS = 77,
+
+ /* Number of msecs the radio spent in transmitting for each power level
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME_PER_LEVEL = 78,
+
+ /* Unsigned 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_SUCC_CNT = 79,
+ /* Unsigned 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_FAIL_CNT = 80,
+ /* Unsigned 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_SUCC_CNT = 81,
+ /* Unsigned 32 bit value */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_FAIL_CNT = 82,
+
+ /* Unsigned int 32 value.
+ * Pending MSDUs corresponding to respective AC.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_PENDING_MSDU = 83,
+
+ /* u32 value representing total time in milliseconds for which the radio
+ * is transmitting on this channel. This attribute will be nested
+ * within QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_TX_TIME = 84,
+ /* u32 value representing total time in milliseconds for which the radio
+ * is receiving all 802.11 frames intended for this device on this
+ * channel. This attribute will be nested within
+ * QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_RX_TIME = 85,
+ /* u8 value representing the channel load percentage. Possible values
+ * are 0-100.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_LOAD_PERCENTAGE = 86,
+ /* u8 value representing the time slicing duty cycle percentage.
+ * Possible values are 0-100.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_TS_DUTY_CYCLE = 87,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_MAX =
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST - 1,
+};
+
+enum qca_wlan_vendor_attr_ll_stats_type {
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_INVALID = 0,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_RADIO = 1,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_IFACE = 2,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_PEERS = 3,
+
+ /* keep last */
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_AFTER_LAST,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_MAX =
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_tdls_configuration - Attributes for
+ * TDLS configuration to the host driver.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE: Configure the TDLS trigger
+ * mode in the host driver. enum qca_wlan_vendor_tdls_trigger_mode
+ * represents the different TDLS trigger modes.
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD: Duration (u32) within
+ * which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD number
+ * of packets shall meet the criteria for implicit TDLS setup.
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD: Number (u32) of Tx/Rx packets
+ * within a duration QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD
+ * to initiate a TDLS setup.
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD: Time (u32) to initiate
+ * a TDLS Discovery to the peer.
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT: Max number (u32) of
+ * discovery attempts to know the TDLS capability of the peer. A peer is
+ * marked as TDLS not capable if there is no response for all the attempts.
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT: Represents a duration (u32)
+ * within which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD
+ * number of TX / RX frames meet the criteria for TDLS teardown.
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD: Minimum number (u32)
+ * of Tx/Rx packets within a duration
+ * QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT to tear down a TDLS link.
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD: Threshold
+ * corresponding to the RSSI of the peer below which a TDLS setup is
+ * triggered.
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD: Threshold
+ * corresponding to the RSSI of the peer above which a TDLS teardown is
+ * triggered.
+ */
+enum qca_wlan_vendor_attr_tdls_configuration {
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE = 1,
+
+ /* Attributes configuring the TDLS Implicit Trigger */
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD = 2,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD = 3,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD = 4,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT = 5,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT = 6,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD = 7,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD = 8,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD = 9,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_tdls_trigger_mode: Represents the TDLS trigger mode in
+ * the driver
+ *
+ * The following are the different values for
+ * QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE.
+ *
+ * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT: The trigger to initiate/teardown
+ * the TDLS connection to a respective peer comes from the user space.
+ * wpa_supplicant provides the commands TDLS_SETUP, TDLS_TEARDOWN,
+ * TDLS_DISCOVER to do this.
+ * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT: Host driver triggers this TDLS
+ * setup/teardown to the eligible peer once the configured criteria
+ * (such as TX/RX threshold, RSSI) is met. The attributes
+ * in QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IMPLICIT_PARAMS correspond to
+ * the different configuration criteria for the TDLS trigger from the
+ * host driver.
+ * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL: Enables the driver to trigger
+ * the TDLS setup / teardown through the implicit mode only to the
+ * configured MAC addresses (wpa_supplicant, with tdls_external_control=1,
+ * configures the MAC address through TDLS_SETUP / TDLS_TEARDOWN commands).
+ * External mode works on top of the implicit mode. Thus the host driver
+ * is expected to configure in TDLS Implicit mode too to operate in
+ * External mode.
+ * Configuring External mode alone without Implicit mode is invalid.
+ *
+ * All the above implementations work as expected only when the host driver
+ * advertises the capability WPA_DRIVER_FLAGS_TDLS_EXTERNAL_SETUP - representing
+ * that the TDLS message exchange is not internal to the host driver, but
+ * depends on wpa_supplicant to do the message exchange.
+ */
+enum qca_wlan_vendor_tdls_trigger_mode {
+ QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT = 1 << 0,
+ QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT = 1 << 1,
+ QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL = 1 << 2,
+};
+
+/**
+ * enum qca_vendor_attr_sar_limits_selections - Source of SAR power limits
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF0: Select SAR profile #0
+ * that is hard-coded in the Board Data File (BDF).
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF1: Select SAR profile #1
+ * that is hard-coded in the Board Data File (BDF).
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF2: Select SAR profile #2
+ * that is hard-coded in the Board Data File (BDF).
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF3: Select SAR profile #3
+ * that is hard-coded in the Board Data File (BDF).
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF4: Select SAR profile #4
+ * that is hard-coded in the Board Data File (BDF).
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_NONE: Do not select any
+ * source of SAR power limits, thereby disabling the SAR power
+ * limit feature.
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER: Select the SAR power
+ * limits configured by %QCA_NL80211_VENDOR_SUBCMD_SET_SAR.
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_V2_0: Select the SAR power
+ * limits version 2.0 configured by %QCA_NL80211_VENDOR_SUBCMD_SET_SAR.
+ *
+ * This enumerates the valid set of values that may be supplied for
+ * attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT in an instance of
+ * the %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor command or in
+ * the response to an instance of the
+ * %QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS vendor command.
+ */
+enum qca_vendor_attr_sar_limits_selections {
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF0 = 0,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF1 = 1,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF2 = 2,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF3 = 3,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF4 = 4,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_NONE = 5,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER = 6,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_V2_0 = 7,
+};
+
+/**
+ * enum qca_vendor_attr_sar_limits_spec_modulations -
+ * SAR limits specification modulation
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_CCK -
+ * CCK modulation
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_OFDM -
+ * OFDM modulation
+ *
+ * This enumerates the valid set of values that may be supplied for
+ * attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION in an
+ * instance of attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC in an
+ * instance of the %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor
+ * command or in the response to an instance of the
+ * %QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS vendor command.
+ */
+enum qca_vendor_attr_sar_limits_spec_modulations {
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_CCK = 0,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_OFDM = 1,
+};
+
+/**
+ * enum qca_vendor_attr_sar_limits - Attributes for SAR power limits
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE: Optional (u32) value to
+ * select which SAR power limit table should be used. Valid
+ * values are enumerated in enum
+ * %qca_vendor_attr_sar_limits_selections. The existing SAR
+ * power limit selection is unchanged if this attribute is not
+ * present.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS: Optional (u32) value
+ * which specifies the number of SAR power limit specifications
+ * which will follow.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC: Nested array of SAR power
+ * limit specifications. The number of specifications is
+ * specified by @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS. Each
+ * specification contains a set of
+ * QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_* attributes. A
+ * specification is uniquely identified by the attributes
+ * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND,
+ * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN, and
+ * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION and always
+ * contains as a payload the attribute
+ * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT,
+ * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX.
+ * Either %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT or
+ * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX is
+ * needed based upon the value of
+ * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND: Optional (u32) value to
+ * indicate for which band this specification applies. Valid
+ * values are enumerated in enum %nl80211_band (although not all
+ * bands may be supported by a given device). If the attribute is
+ * not supplied then the specification will be applied to all
+ * supported bands.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN: Optional (u32) value
+ * to indicate for which antenna chain this specification
+ * applies, i.e. 1 for chain 1, 2 for chain 2, etc. If the
+ * attribute is not supplied then the specification will be
+ * applied to all chains.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION: Optional (u32)
+ * value to indicate for which modulation scheme this
+ * specification applies. Valid values are enumerated in enum
+ * %qca_vendor_attr_sar_limits_spec_modulations. If the attribute
+ * is not supplied then the specification will be applied to all
+ * modulation schemes.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT: Required (u32)
+ * value to specify the actual power limit value in units of 0.5
+ * dBm (i.e., a value of 11 represents 5.5 dBm).
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT is
+ * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX: Required (u32)
+ * value to indicate SAR V2 indices (0 - 11) to select SAR V2 profiles.
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT is
+ * %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_V2_0.
+ *
+ * These attributes are used with %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS
+ * and %QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS.
+ */
+enum qca_vendor_attr_sar_limits {
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE = 1,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS = 2,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC = 3,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND = 4,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN = 5,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION = 6,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT = 7,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX = 8,
+
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_MAX =
+ QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_get_wifi_info: Attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO sub command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_DRIVER_VERSION: In a request this attribute
+ * should be set to any U8 value to indicate that the driver version
+ * should be returned. When enabled in this manner, in a response this
+ * attribute will contain a string representation of the driver version.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_FIRMWARE_VERSION: In a request this attribute
+ * should be set to any U8 value to indicate that the firmware version
+ * should be returned. When enabled in this manner, in a response this
+ * attribute will contain a string representation of the firmware version.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_RADIO_INDEX: In a request this attribute
+ * should be set to any U32 value to indicate that the current radio
+ * index should be returned. When enabled in this manner, in a response
+ * this attribute will contain a U32 radio index value.
+ *
+ */
+enum qca_wlan_vendor_attr_get_wifi_info {
+ QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_WIFI_INFO_DRIVER_VERSION = 1,
+ QCA_WLAN_VENDOR_ATTR_WIFI_INFO_FIRMWARE_VERSION = 2,
+ QCA_WLAN_VENDOR_ATTR_WIFI_INFO_RADIO_INDEX = 3,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_MAX =
+ QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST - 1,
+};
+
+/*
+ * enum qca_wlan_vendor_attr_wifi_logger_start: Attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START sub command.
+ */
+enum qca_wlan_vendor_attr_wifi_logger_start {
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_RING_ID = 1,
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_VERBOSE_LEVEL = 2,
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_FLAGS = 3,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_GET_MAX =
+ QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST - 1,
+};
+
+enum qca_wlan_vendor_attr_logger_results {
+ QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_INVALID = 0,
+
+ /* Unsigned 32-bit value; must match the request Id supplied by
+ * Wi-Fi HAL in the corresponding subcmd NL msg.
+ */
+ QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_REQUEST_ID = 1,
+
+ /* Unsigned 32-bit value; used to indicate the size of memory
+ * dump to be allocated.
+ */
+ QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_MEMDUMP_SIZE = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_MAX =
+ QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_scan_freq_list_type: Frequency list types
+ *
+ * @QCA_PREFERRED_SCAN_FREQ_LIST: The driver shall use the scan frequency list
+ * specified with attribute QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST as
+ * a preferred frequency list for roaming.
+ *
+ * @QCA_SPECIFIC_SCAN_FREQ_LIST: The driver shall use the frequency list
+ * specified with attribute QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST as
+ * a specific frequency list for roaming.
+ */
+enum qca_scan_freq_list_type {
+ QCA_PREFERRED_SCAN_FREQ_LIST = 1,
+ QCA_SPECIFIC_SCAN_FREQ_LIST = 2,
+};
+
+/**
+ * enum qca_vendor_attr_scan_freq_list_scheme: Frequency list scheme
+ *
+ * @QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST: Nested attribute of u32 values
+ * List of frequencies in MHz to be considered for a roam scan.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_TYPE: Unsigned 32-bit value.
+ * Type of frequency list scheme being configured/gotten as defined by the
+ * enum qca_scan_freq_list_type.
+ */
+enum qca_vendor_attr_scan_freq_list_scheme {
+ QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST = 1,
+ QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_TYPE = 2,
+
+ /* keep last */
+ QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_SCHEME_AFTER_LAST,
+ QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_SCHEME_MAX =
+ QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_SCHEME_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_roam_scan_scheme: Scan scheme
+ *
+ * @QCA_ROAM_SCAN_SCHEME_NO_SCAN: No frequencies specified to scan.
+ * Indicates the driver to not scan on a Roam Trigger scenario, but
+ * disconnect. E.g., on a BTM request from the AP the driver/firmware shall
+ * disconnect from the current connected AP by notifying a failure
+ * code in the BTM response.
+ *
+ * @QCA_ROAM_SCAN_SCHEME_PARTIAL_SCAN: Indicates the driver/firmware to
+ * trigger partial frequency scans. These frequencies are the ones learned
+ * or maintained by the driver based on the probability of finding the
+ * BSSIDs in the ESS for which the roaming is triggered.
+ *
+ * @QCA_ROAM_SCAN_SCHEME_FULL_SCAN: Indicates the driver/firmware to
+ * trigger the scan on all the valid frequencies to find better
+ * candidates to roam.
+ */
+enum qca_roam_scan_scheme {
+ QCA_ROAM_SCAN_SCHEME_NO_SCAN = 0,
+ QCA_ROAM_SCAN_SCHEME_PARTIAL_SCAN = 1,
+ QCA_ROAM_SCAN_SCHEME_FULL_SCAN = 2,
+};
+
+/*
+ * enum qca_vendor_roam_triggers: Bitmap of roaming triggers
+ *
+ * @QCA_ROAM_TRIGGER_REASON_PER: Set if the roam has to be triggered based on
+ * a bad packet error rates (PER).
+ * @QCA_ROAM_TRIGGER_REASON_BEACON_MISS: Set if the roam has to be triggered
+ * based on beacon misses from the connected AP.
+ * @QCA_ROAM_TRIGGER_REASON_POOR_RSSI: Set if the roam has to be triggered
+ * due to poor RSSI of the connected AP.
+ * @QCA_ROAM_TRIGGER_REASON_BETTER_RSSI: Set if the roam has to be triggered
+ * upon finding a BSSID with a better RSSI than the connected BSSID.
+ * Here the RSSI of the current BSSID need not be poor.
+ * @QCA_ROAM_TRIGGER_REASON_PERIODIC: Set if the roam has to be triggered
+ * by triggering a periodic scan to find a better AP to roam.
+ * @QCA_ROAM_TRIGGER_REASON_DENSE: Set if the roam has to be triggered
+ * when the connected channel environment is too noisy/congested.
+ * @QCA_ROAM_TRIGGER_REASON_BTM: Set if the roam has to be triggered
+ * when BTM Request frame is received from the connected AP.
+ * @QCA_ROAM_TRIGGER_REASON_BSS_LOAD: Set if the roam has to be triggered
+ * when the channel utilization is goes above the configured threshold.
+ * @QCA_ROAM_TRIGGER_REASON_USER_TRIGGER: Set if the roam has to be triggered
+ * based on the request from the user (space).
+ * @QCA_ROAM_TRIGGER_REASON_DEAUTH: Set if the roam has to be triggered when
+ * device receives Deauthentication/Disassociation frame from connected AP.
+ * @QCA_ROAM_TRIGGER_REASON_IDLE: Set if the roam has to be triggered when the
+ * device is in idle state (no TX/RX) and suspend mode, if the current RSSI
+ * is determined to be a poor one.
+ * @QCA_ROAM_TRIGGER_REASON_TX_FAILURES: Set if the roam has to be triggered
+ * based on continuous TX Data frame failures to the connected AP.
+ * @QCA_ROAM_TRIGGER_REASON_EXTERNAL_SCAN: Set if the roam has to be triggered
+ * based on the scan results obtained from an external scan (not triggered
+ * to aim roaming).
+ *
+ * Set the corresponding roam trigger reason bit to consider it for roam
+ * trigger.
+ * Userspace can set multiple bits and send to the driver. The driver shall
+ * consider all of them to trigger/initiate a roam scan.
+ */
+enum qca_vendor_roam_triggers {
+ QCA_ROAM_TRIGGER_REASON_PER = 1 << 0,
+ QCA_ROAM_TRIGGER_REASON_BEACON_MISS = 1 << 1,
+ QCA_ROAM_TRIGGER_REASON_POOR_RSSI = 1 << 2,
+ QCA_ROAM_TRIGGER_REASON_BETTER_RSSI = 1 << 3,
+ QCA_ROAM_TRIGGER_REASON_PERIODIC = 1 << 4,
+ QCA_ROAM_TRIGGER_REASON_DENSE = 1 << 5,
+ QCA_ROAM_TRIGGER_REASON_BTM = 1 << 6,
+ QCA_ROAM_TRIGGER_REASON_BSS_LOAD = 1 << 7,
+ QCA_ROAM_TRIGGER_REASON_USER_TRIGGER = 1 << 8,
+ QCA_ROAM_TRIGGER_REASON_DEAUTH = 1 << 9,
+ QCA_ROAM_TRIGGER_REASON_IDLE = 1 << 10,
+ QCA_ROAM_TRIGGER_REASON_TX_FAILURES = 1 << 11,
+ QCA_ROAM_TRIGGER_REASON_EXTERNAL_SCAN = 1 << 12,
+};
+
+/*
+ * enum qca_vendor_roam_fail_reasons: Defines the various roam
+ * fail reasons. This enum value is used in
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON attribute.
+ *
+ * @QCA_ROAM_FAIL_REASON_SCAN_NOT_ALLOWED: Roam module in the firmware is not
+ * able to trigger the scan.
+ * @QCA_ROAM_FAIL_REASON_NO_AP_FOUND: No roamable APs found during roam scan.
+ * @QCA_ROAM_FAIL_REASON_NO_CAND_AP_FOUND: No candidate APs found during roam
+ * scan.
+ * @QCA_ROAM_FAIL_REASON_HOST: Roam fail due to disconnect issued from host.
+ * @QCA_ROAM_FAIL_REASON_AUTH_SEND: Unable to send Authentication frame.
+ * @QCA_ROAM_FAIL_REASON_AUTH_RECV: Received Authentication frame with error
+ * status code.
+ * @QCA_ROAM_FAIL_REASON_NO_AUTH_RESP: Authentication frame not received.
+ * @QCA_ROAM_FAIL_REASON_REASSOC_SEND: Unable to send Reassociation Request
+ * frame.
+ * @QCA_ROAM_FAIL_REASON_REASSOC_RECV: Received Reassociation Response frame
+ * with error status code.
+ * @QCA_ROAM_FAIL_REASON_NO_REASSOC_RESP: Reassociation Response frame not
+ * received.
+ * @QCA_ROAM_FAIL_REASON_SCAN_FAIL: Scan module not able to start scan.
+ * @QCA_ROAM_FAIL_REASON_AUTH_NO_ACK: No ACK is received for Authentication
+ * frame.
+ * @QCA_ROAM_FAIL_REASON_AUTH_INTERNAL_DROP: Authentication frame is dropped
+ * internally before transmission.
+ * @QCA_ROAM_FAIL_REASON_REASSOC_NO_ACK: No ACK is received for Reassociation
+ * Request frame.
+ * @QCA_ROAM_FAIL_REASON_REASSOC_INTERNAL_DROP: Reassociation Request frame is
+ * dropped internally.
+ * @QCA_ROAM_FAIL_REASON_EAPOL_M1_TIMEOUT: EAPOL-Key M1 is not received and
+ * times out.
+ * @QCA_ROAM_FAIL_REASON_EAPOL_M2_SEND: Unable to send EAPOL-Key M2 frame.
+ * @QCA_ROAM_FAIL_REASON_EAPOL_M2_INTERNAL_DROP: EAPOL-Key M2 frame dropped
+ * internally.
+ * @QCA_ROAM_FAIL_REASON_EAPOL_M2_NO_ACK: No ACK is received for EAPOL-Key
+ * M2 frame.
+ * @QCA_ROAM_FAIL_REASON_EAPOL_M3_TIMEOUT: EAPOL-Key M3 frame is not received.
+ * @QCA_ROAM_FAIL_REASON_EAPOL_M4_SEND: Unable to send EAPOL-Key M4 frame.
+ * @QCA_ROAM_FAIL_REASON_EAPOL_M4_INTERNAL_DROP: EAPOL-Key M4 frame dropped
+ * internally.
+ * @QCA_ROAM_FAIL_REASON_EAPOL_M4_NO_ACK: No ACK is received for EAPOL-Key M4
+ * frame.
+ * @QCA_ROAM_FAIL_REASON_NO_SCAN_FOR_FINAL_BEACON_MISS: Roam scan is not
+ * started for final beacon miss case.
+ * @QCA_ROAM_FAIL_REASON_DISCONNECT: Deauthentication or Disassociation frame
+ * received from the AP during roaming handoff.
+ * @QCA_ROAM_FAIL_REASON_RESUME_ABORT: Firmware roams to the AP when the Apps
+ * or host is suspended and gives the indication of the last roamed AP only
+ * when the Apps is resumed. If the Apps is resumed while the roaming is in
+ * progress, this ongoing roaming is aborted and the last roamed AP is
+ * indicated to host.
+ * @QCA_ROAM_FAIL_REASON_SAE_INVALID_PMKID: WPA3-SAE invalid PMKID.
+ * @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT: WPA3-SAE pre-authentication times
+ * out.
+ * @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL: WPA3-SAE pre-authentication fails.
+ */
+enum qca_vendor_roam_fail_reasons {
+ QCA_ROAM_FAIL_REASON_NONE = 0,
+ QCA_ROAM_FAIL_REASON_SCAN_NOT_ALLOWED = 1,
+ QCA_ROAM_FAIL_REASON_NO_AP_FOUND = 2,
+ QCA_ROAM_FAIL_REASON_NO_CAND_AP_FOUND = 3,
+ QCA_ROAM_FAIL_REASON_HOST = 4,
+ QCA_ROAM_FAIL_REASON_AUTH_SEND = 5,
+ QCA_ROAM_FAIL_REASON_AUTH_RECV = 6,
+ QCA_ROAM_FAIL_REASON_NO_AUTH_RESP = 7,
+ QCA_ROAM_FAIL_REASON_REASSOC_SEND = 8,
+ QCA_ROAM_FAIL_REASON_REASSOC_RECV = 9,
+ QCA_ROAM_FAIL_REASON_NO_REASSOC_RESP = 10,
+ QCA_ROAM_FAIL_REASON_SCAN_FAIL = 11,
+ QCA_ROAM_FAIL_REASON_AUTH_NO_ACK = 12,
+ QCA_ROAM_FAIL_REASON_AUTH_INTERNAL_DROP = 13,
+ QCA_ROAM_FAIL_REASON_REASSOC_NO_ACK = 14,
+ QCA_ROAM_FAIL_REASON_REASSOC_INTERNAL_DROP = 15,
+ QCA_ROAM_FAIL_REASON_EAPOL_M1_TIMEOUT = 16,
+ QCA_ROAM_FAIL_REASON_EAPOL_M2_SEND = 17,
+ QCA_ROAM_FAIL_REASON_EAPOL_M2_INTERNAL_DROP = 18,
+ QCA_ROAM_FAIL_REASON_EAPOL_M2_NO_ACK = 19,
+ QCA_ROAM_FAIL_REASON_EAPOL_M3_TIMEOUT = 20,
+ QCA_ROAM_FAIL_REASON_EAPOL_M4_SEND = 21,
+ QCA_ROAM_FAIL_REASON_EAPOL_M4_INTERNAL_DROP = 22,
+ QCA_ROAM_FAIL_REASON_EAPOL_M4_NO_ACK = 23,
+ QCA_ROAM_FAIL_REASON_NO_SCAN_FOR_FINAL_BEACON_MISS = 24,
+ QCA_ROAM_FAIL_REASON_DISCONNECT = 25,
+ QCA_ROAM_FAIL_REASON_RESUME_ABORT = 26,
+ QCA_ROAM_FAIL_REASON_SAE_INVALID_PMKID = 27,
+ QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT = 28,
+ QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL = 29,
+};
+
+/*
+ * enum qca_vendor_roam_invoke_fail_reasons: Defines the various roam
+ * invoke fail reasons. This enum value is used in
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON attribute.
+ *
+ * @QCA_ROAM_INVOKE_STATUS_IFACE_INVALID: Invalid interface ID is passed
+ * in roam invoke command.
+ * @QCA_ROAM_INVOKE_STATUS_OFFLOAD_DISABLE: Roam offload in firmware is not
+ * enabled.
+ * @QCA_ROAM_INVOKE_STATUS_AP_SSID_LENGTH_INVALID: Connected AP profile SSID
+ * length is invalid.
+ * @QCA_ROAM_INVOKE_STATUS_ROAM_DISALLOW: Firmware internal roaming is already
+ * in progress.
+ * @QCA_ROAM_INVOKE_STATUS_NON_ROAMABLE_AP: Host sends the Beacon/Probe Response
+ * of the AP in the roam invoke command to firmware. This reason is sent by the
+ * firmware when the given AP is configured to be ignored or SSID/security
+ * does not match.
+ * @QCA_ROAM_INVOKE_STATUS_ROAM_INTERNAL_FAIL: Roam handoff failed because of
+ * firmware internal reasons.
+ * @QCA_ROAM_INVOKE_STATUS_DISALLOW: Roam invoke trigger is not enabled.
+ * @QCA_ROAM_INVOKE_STATUS_SCAN_FAIL: Scan start fail for roam invoke.
+ * @QCA_ROAM_INVOKE_STATUS_START_ROAM_FAIL: Roam handoff start fail.
+ * @QCA_ROAM_INVOKE_STATUS_INVALID_PARAMS: Roam invoke parameters are invalid.
+ * @QCA_ROAM_INVOKE_STATUS_NO_CAND_AP: No candidate AP found to roam to.
+ * @QCA_ROAM_INVOKE_STATUS_ROAM_FAIL: Roam handoff failed.
+ */
+enum qca_vendor_roam_invoke_fail_reasons {
+ QCA_ROAM_INVOKE_STATUS_NONE = 0,
+ QCA_ROAM_INVOKE_STATUS_IFACE_INVALID = 1,
+ QCA_ROAM_INVOKE_STATUS_OFFLOAD_DISABLE = 2,
+ QCA_ROAM_INVOKE_STATUS_AP_SSID_LENGTH_INVALID = 3,
+ QCA_ROAM_INVOKE_STATUS_ROAM_DISALLOW = 4,
+ QCA_ROAM_INVOKE_STATUS_NON_ROAMABLE_AP = 5,
+ QCA_ROAM_INVOKE_STATUS_ROAM_INTERNAL_FAIL = 6,
+ QCA_ROAM_INVOKE_STATUS_DISALLOW = 7,
+ QCA_ROAM_INVOKE_STATUS_SCAN_FAIL = 8,
+ QCA_ROAM_INVOKE_STATUS_START_ROAM_FAIL = 9,
+ QCA_ROAM_INVOKE_STATUS_INVALID_PARAMS = 10,
+ QCA_ROAM_INVOKE_STATUS_NO_CAND_AP = 11,
+ QCA_ROAM_INVOKE_STATUS_ROAM_FAIL = 12,
+
+};
+
+/**
+ * enum qca_vendor_attr_roam_candidate_selection_criteria:
+ *
+ * Each attribute carries a weightage in percentage (%).
+ *
+ * @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_RSSI: Unsigned 8-bit value.
+ * Represents the weightage to be given for the RSSI selection
+ * criteria among other parameters.
+ *
+ * @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE: Unsigned 8-bit value.
+ * Represents the weightage to be given for the rate selection
+ * criteria among other parameters.
+ *
+ * @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BW: Unsigned 8-bit value.
+ * Represents the weightage to be given for the band width selection
+ * criteria among other parameters.
+ *
+ * @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BAND: Unsigned 8-bit value.
+ * Represents the weightage to be given for the band selection
+ * criteria among other parameters.
+ *
+ * @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_NSS: Unsigned 8-bit value.
+ * Represents the weightage to be given for the NSS selection
+ * criteria among other parameters.
+ *
+ * @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_CHAN_CONGESTION: Unsigned 8-bit value.
+ * Represents the weightage to be given for the channel congestion
+ * selection criteria among other parameters.
+ *
+ * @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BEAMFORMING: Unsigned 8-bit value.
+ * Represents the weightage to be given for the beamforming selection
+ * criteria among other parameters.
+ *
+ * @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_OCE_WAN: Unsigned 8-bit value.
+ * Represents the weightage to be given for the OCE selection
+ * criteria among other parameters.
+ */
+enum qca_vendor_attr_roam_candidate_selection_criteria {
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_RSSI = 1,
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE = 2,
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BW = 3,
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BAND = 4,
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_NSS = 5,
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_CHAN_CONGESTION = 6,
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BEAMFORMING = 7,
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_OCE_WAN = 8,
+
+ /* keep last */
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE_AFTER_LAST,
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE_MAX =
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_vendor_attr_roam_control - Attributes to carry roam configuration
+ * The following attributes are used to set/get/clear the respective
+ * configurations to/from the driver.
+ * For the get, the attribute for the configuration to be queried shall
+ * carry any of its acceptable values to the driver. In return, the driver
+ * shall send the configured values within the same attribute to the user
+ * space.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_ENABLE: Unsigned 8-bit value.
+ * Signifies to enable/disable roam control in driver.
+ * 1-enable, 0-disable
+ * Enable: Mandates the driver to do the further roams using the
+ * configuration parameters set through
+ * QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET.
+ * Disable: Disables the driver/firmware roaming triggered through
+ * QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET. Further roaming is
+ * expected to continue with the default configurations.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_STATUS: Unsigned 8-bit value.
+ * This is used along with QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_GET.
+ * Roam control status is obtained through this attribute.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_CLEAR_ALL: Flag attribute to indicate the
+ * complete config set through QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET
+ * is to be cleared in the driver.
+ * This is used along with QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR
+ * and shall be ignored if used with other sub commands.
+ * If this attribute is specified along with subcmd
+ * QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR, the driver shall ignore
+ * all other attributes, if there are any.
+ * If this attribute is not specified when the subcmd
+ * QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR is sent, the driver shall
+ * clear the data corresponding to the attributes specified.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_FREQ_LIST_SCHEME: Nested attribute to carry the
+ * list of frequencies and its type, represented by
+ * enum qca_vendor_attr_scan_freq_list_scheme.
+ * Frequency list and its type are mandatory for this attribute to set
+ * the frequencies.
+ * Frequency type is mandatory for this attribute to get the frequencies
+ * and the frequency list is obtained through
+ * QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST.
+ * Frequency list type is mandatory for this attribute to clear the
+ * frequencies.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_SCAN_PERIOD: Unsigned 32-bit value.
+ * Carries the value of scan period in seconds to set.
+ * The value of scan period is obtained with the same attribute for get.
+ * Clears the scan period in the driver when specified with clear command.
+ * Scan period is the idle time in seconds between each subsequent
+ * channel scans.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_FULL_SCAN_PERIOD: Unsigned 32-bit value.
+ * Carries the value of full scan period in seconds to set.
+ * The value of full scan period is obtained with the same attribute for
+ * get.
+ * Clears the full scan period in the driver when specified with clear
+ * command. Full scan period is the idle period in seconds between two
+ * successive full channel roam scans.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_TRIGGERS: Unsigned 32-bit value.
+ * Carries a bitmap of the roam triggers specified in
+ * enum qca_vendor_roam_triggers.
+ * The driver shall enable roaming by enabling corresponding roam triggers
+ * based on the trigger bits sent with this attribute.
+ * If this attribute is not configured, the driver shall proceed with
+ * default behavior.
+ * The bitmap configured is obtained with the same attribute for get.
+ * Clears the bitmap configured in driver when specified with clear
+ * command.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_SELECTION_CRITERIA: Nested attribute signifying the
+ * weightage in percentage (%) to be given for each selection criteria.
+ * Different roam candidate selection criteria are represented by
+ * enum qca_vendor_attr_roam_candidate_selection_criteria.
+ * The driver shall select the roam candidate based on corresponding
+ * candidate selection scores sent.
+ *
+ * An empty nested attribute is used to indicate that no specific
+ * preference score/criteria is configured (i.e., to disable this mechanism
+ * in the set case and to show that the mechanism is disabled in the get
+ * case).
+ *
+ * Userspace can send multiple attributes out of this enum to the driver.
+ * Since this attribute represents the weight/percentage of preference for
+ * the respective selection criteria, it is preferred to configure 100%
+ * total weightage. The value in each attribute or cumulative weight of the
+ * values in all the nested attributes should not exceed 100%. The driver
+ * shall reject such configuration.
+ *
+ * If the weights configured through this attribute are less than 100%,
+ * the driver shall honor the weights (x%) passed for the corresponding
+ * selection criteria and choose/distribute rest of the weight (100-x)%
+ * for the other selection criteria, based on its internal logic.
+ *
+ * The selection criteria configured is obtained with the same
+ * attribute for get.
+ *
+ * Clears the selection criteria configured in the driver when specified
+ * with clear command.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME: Unsigned 32-bit value.
+ * Represents value of the scan frequency scheme from enum
+ * qca_roam_scan_scheme.
+ * It's an optional attribute. If this attribute is not configured, the
+ * driver shall proceed with default behavior.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_CONNECTED_RSSI_THRESHOLD: Signed 32-bit value in dBm,
+ * signifying the RSSI threshold of the current connected AP, indicating
+ * the driver to trigger roam only when the current connected AP's RSSI
+ * is less than this threshold.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD: Signed 32-bit value in dBm,
+ * signifying the RSSI threshold of the candidate AP, indicating
+ * the driver to trigger roam only to the candidate AP with RSSI
+ * better than this threshold. If RSSI thresholds for candidate APs found
+ * in the 2.4 GHz, 5 GHz, and 6 GHz bands are configured separately using
+ * QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_2P4GHZ,
+ * QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_5GHZ, and/or
+ * QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_6GHZ, those values will
+ * take precedence over the value configured using the
+ * QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD attribute.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_USER_REASON: Unsigned 32-bit value. Represents the
+ * user defined reason code to be sent to the AP in response to AP's
+ * request to trigger the roam if the roaming cannot be triggered.
+ * Applies to all the scenarios of AP assisted roaming (e.g., BTM).
+ *
+ * @QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS: Unsigned 32-bit value.
+ * Carries a bitmap of the roam triggers specified in
+ * enum qca_vendor_roam_triggers.
+ * Represents the roam triggers for which the specific scan scheme from
+ * enum qca_roam_scan_scheme has to be applied.
+ * It's an optional attribute. If this attribute is not configured, but
+ * QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME is specified, the scan scheme
+ * specified through QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME is applicable for
+ * all the roams.
+ * If both QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME and
+ * QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS are not specified, the
+ * driver shall proceed with the default behavior.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_2P4GHZ: Signed 32-bit value
+ * in dBm, signifying the RSSI threshold of the candidate AP found in the
+ * 2.4 GHz band. The driver/firmware shall trigger roaming to the candidate
+ * AP found in the 2.4 GHz band only if its RSSI value is better than this
+ * threshold. Optional attribute. If this attribute is not included, the
+ * threshold value specified by the
+ * QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD attribute shall be used.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_5GHZ: Signed 32-bit value in
+ * dBm, signifying the RSSI threshold of the candidate AP found in the 5
+ * GHz band. The driver/firmware shall trigger roaming to the candidate AP
+ * found in the 5 GHz band only if its RSSI value is better than this
+ * threshold. Optional attribute. If this attribute is not included, the
+ * threshold value specified by tge
+ * QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD attribute shall be used.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_6GHZ: Signed 32-bit value in
+ * dBm, signifying the RSSI threshold of the candidate AP found in the 6
+ * GHz band. The driver/firmware shall trigger roaming to the candidate AP
+ * found in the 6 GHz band only if its RSSI value is better than this
+ * threshold. Optional attribute. If this attribute is not included, the
+ * threshold value specified by the
+ * QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD attribute shall be used.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_BAND_MASK: Unsigned 32-bit value.
+ * Carries bitmask value of bits from &enum qca_set_band and represents
+ * all the bands in which roaming is allowed. The configuration is valid
+ * until next disconnection. If this attribute is not present, the
+ * existing configuration shall be used. By default, roaming is allowed on
+ * all bands supported by the local device. When the value is set to
+ * %QCA_SETBAND_AUTO, all supported bands shall be enabled.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_ACTIVE_CH_DWELL_TIME: u16 value in milliseconds.
+ * Optional parameter. Scan dwell time for active channels in the 2.4/5 GHz
+ * bands. If this attribute is not configured, the driver shall proceed
+ * with default behavior.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_PASSIVE_CH_DWELL_TIME: u16 value in milliseconds.
+ * Optional parameter. Scan dwell time for passive channels in the 5 GHz
+ * band. If this attribute is not configured, the driver shall proceed with
+ * default behavior.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_HOME_CHANNEL_TIME: u16 value in milliseconds.
+ * Optional parameter. The minimum duration to stay on the connected AP
+ * channel during the channel scanning. If this attribute is not
+ * configured, the driver shall proceed with default behavior.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_MAXIMUM_AWAY_TIME: u16 value in milliseconds.
+ * Optional parameter. The maximum duration for which the radio can scan
+ * foreign channels consecutively without coming back to home channel. If
+ * this attribute is not configured, the driver shall proceed with default
+ * behavior.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_SCAN_6G_PSC_DWELL_TIME: u16 value in milliseconds.
+ * Optional parameter. Scan dwell time for 6G Preferred Scanning Channels.
+ * If this attribute is not configured, the driver shall proceed with
+ * default behavior.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_SCAN_6G_NON_PSC_DWELL_TIME: u16 value in milliseconds.
+ * Optional parameter. Scan dwell time for 6G Non Preferred Scanning
+ * Channels. If this attribute is not configured, the driver shall proceed
+ * with default behavior.
+ */
+enum qca_vendor_attr_roam_control {
+ QCA_ATTR_ROAM_CONTROL_ENABLE = 1,
+ QCA_ATTR_ROAM_CONTROL_STATUS = 2,
+ QCA_ATTR_ROAM_CONTROL_CLEAR_ALL = 3,
+ QCA_ATTR_ROAM_CONTROL_FREQ_LIST_SCHEME= 4,
+ QCA_ATTR_ROAM_CONTROL_SCAN_PERIOD = 5,
+ QCA_ATTR_ROAM_CONTROL_FULL_SCAN_PERIOD = 6,
+ QCA_ATTR_ROAM_CONTROL_TRIGGERS = 7,
+ QCA_ATTR_ROAM_CONTROL_SELECTION_CRITERIA = 8,
+ QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME = 9,
+ QCA_ATTR_ROAM_CONTROL_CONNECTED_RSSI_THRESHOLD = 10,
+ QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD = 11,
+ QCA_ATTR_ROAM_CONTROL_USER_REASON = 12,
+ QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS = 13,
+ QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_2P4GHZ = 14,
+ QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_5GHZ = 15,
+ QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_6GHZ = 16,
+ QCA_ATTR_ROAM_CONTROL_BAND_MASK = 17,
+ QCA_ATTR_ROAM_CONTROL_ACTIVE_CH_DWELL_TIME = 18,
+ QCA_ATTR_ROAM_CONTROL_PASSIVE_CH_DWELL_TIME = 19,
+ QCA_ATTR_ROAM_CONTROL_HOME_CHANNEL_TIME = 20,
+ QCA_ATTR_ROAM_CONTROL_MAXIMUM_AWAY_TIME = 21,
+ QCA_ATTR_ROAM_CONTROL_SCAN_6G_PSC_DWELL_TIME = 22,
+ QCA_ATTR_ROAM_CONTROL_SCAN_6G_NON_PSC_DWELL_TIME = 23,
+
+ /* keep last */
+ QCA_ATTR_ROAM_CONTROL_AFTER_LAST,
+ QCA_ATTR_ROAM_CONTROL_MAX =
+ QCA_ATTR_ROAM_CONTROL_AFTER_LAST - 1,
+};
+
+/*
+ * enum qca_wlan_vendor_attr_roaming_config_params: Attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_ROAM sub command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD: Unsigned 32-bit value.
+ * Represents the different roam sub commands referred by
+ * enum qca_wlan_vendor_roaming_subcmd.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID: Unsigned 32-bit value.
+ * Represents the Request ID for the specific set of commands.
+ * This also helps to map specific set of commands to the respective
+ * ID / client. e.g., helps to identify the user entity configuring the
+ * ignored BSSIDs and accordingly clear the respective ones with the
+ * matching ID.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS: Unsigned
+ * 32-bit value.Represents the number of whitelist SSIDs configured.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST: Nested attribute
+ * to carry the list of Whitelist SSIDs.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID: SSID (binary attribute,
+ * 0..32 octets). Represents the white list SSID. Whitelist SSIDs
+ * represent the list of SSIDs to which the firmware/driver can consider
+ * to roam to.
+ *
+ * The following PARAM_A_BAND_XX attributes are applied to 5GHz BSSIDs when
+ * comparing with a 2.4GHz BSSID. They are not applied when comparing two
+ * 5GHz BSSIDs.The following attributes are set through the Roaming SUBCMD -
+ * QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_GSCAN_ROAM_PARAMS.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_THRESHOLD: Signed 32-bit
+ * value, RSSI threshold above which 5GHz RSSI is favored.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_THRESHOLD: Signed 32-bit
+ * value, RSSI threshold below which 5GHz RSSI is penalized.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_FACTOR: Unsigned 32-bit
+ * value, factor by which 5GHz RSSI is boosted.
+ * boost=(RSSI_measured-5GHz_boost_threshold)*5GHz_boost_factor
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_FACTOR: Unsigned 32-bit
+ * value, factor by which 5GHz RSSI is penalized.
+ * penalty=(5GHz_penalty_threshold-RSSI_measured)*5GHz_penalty_factor
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_MAX_BOOST: Unsigned 32-bit
+ * value, maximum boost that can be applied to a 5GHz RSSI.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_LAZY_ROAM_HISTERESYS: Unsigned 32-bit
+ * value, boost applied to current BSSID to ensure the currently
+ * associated BSSID is favored so as to prevent ping-pong situations.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALERT_ROAM_RSSI_TRIGGER: Signed 32-bit
+ * value, RSSI below which "Alert" roam is enabled.
+ * "Alert" mode roaming - firmware is "urgently" hunting for another BSSID
+ * because the RSSI is low, or because many successive beacons have been
+ * lost or other bad link conditions.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE: Unsigned 32-bit
+ * value. 1-Enable, 0-Disable. Represents "Lazy" mode, where
+ * firmware is hunting for a better BSSID or white listed SSID even though
+ * the RSSI of the link is good. The parameters enabling the roaming are
+ * configured through the PARAM_A_BAND_XX attrbutes.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS: Nested attribute,
+ * represents the BSSIDs preferred over others while evaluating them
+ * for the roaming.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_NUM_BSSID: Unsigned
+ * 32-bit value. Represents the number of preferred BSSIDs set.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_BSSID: 6-byte MAC
+ * address representing the BSSID to be preferred.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_RSSI_MODIFIER: Signed
+ * 32-bit value, representing the modifier to be applied to the RSSI of
+ * the BSSID for the purpose of comparing it with other roam candidate.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS: Nested attribute,
+ * represents the BSSIDs to get ignored for roaming.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID: Unsigned
+ * 32-bit value, represents the number of ignored BSSIDs.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID: 6-byte MAC
+ * address representing the ignored BSSID.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_HINT: Flag attribute,
+ * indicates this request to ignore the BSSID as a hint to the driver. The
+ * driver can select this BSSID in the worst case (when no other BSSIDs are
+ * better).
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL: Nested attribute to
+ * set/get/clear the roam control config as
+ * defined @enum qca_vendor_attr_roam_control.
+ */
+enum qca_wlan_vendor_attr_roaming_config_params {
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_INVALID = 0,
+
+ QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD = 1,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID = 2,
+
+ /* Attributes for wifi_set_ssid_white_list */
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS = 3,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST = 4,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID = 5,
+
+ /* Attributes for set_roam_params */
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_THRESHOLD = 6,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_THRESHOLD = 7,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_FACTOR = 8,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_FACTOR = 9,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_MAX_BOOST = 10,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_LAZY_ROAM_HISTERESYS = 11,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALERT_ROAM_RSSI_TRIGGER = 12,
+
+ /* Attribute for set_lazy_roam */
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE = 13,
+
+ /* Attribute for set_lazy_roam with preferences */
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS = 14,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_NUM_BSSID = 15,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_BSSID = 16,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_RSSI_MODIFIER = 17,
+
+ /* Attribute for setting ignored BSSID parameters */
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS = 18,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID = 19,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID = 20,
+ /* Flag attribute indicates this entry as a hint */
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_HINT = 21,
+
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL = 22,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_MAX =
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST - 1,
+};
+
+/*
+ * enum qca_wlan_vendor_roaming_subcmd: Referred by
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD.
+ *
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SSID_WHITE_LIST: Sub command to
+ * configure the white list SSIDs. These are configured through
+ * the following attributes.
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS,
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST,
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID
+ *
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_GSCAN_ROAM_PARAMS: Sub command to
+ * configure the Roam params. These parameters are evaluated on the GScan
+ * results. Refers the attributes PARAM_A_BAND_XX above to configure the
+ * params.
+ *
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_LAZY_ROAM: Sets the Lazy roam. Uses
+ * the attribute QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE
+ * to enable/disable Lazy roam.
+ *
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BSSID_PREFS: Sets the BSSID
+ * preference. Contains the attribute
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS to set the BSSID
+ * preference.
+ *
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BLACKLIST_BSSID: Sets the list of BSSIDs
+ * to ignore in roaming decision. Uses
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS to set the list.
+ *
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET: Command to set the
+ * roam control config to the driver with the attribute
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL.
+ *
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_GET: Command to obtain the
+ * roam control config from driver with the attribute
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL.
+ * For the get, the attribute for the configuration to be queried shall
+ * carry any of its acceptable value to the driver. In return, the driver
+ * shall send the configured values within the same attribute to the user
+ * space.
+ *
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR: Command to clear the
+ * roam control config in the driver with the attribute
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL.
+ * The driver shall continue with its default roaming behavior when data
+ * corresponding to an attribute is cleared.
+ */
+enum qca_wlan_vendor_roaming_subcmd {
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_INVALID = 0,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_SSID_WHITE_LIST = 1,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_GSCAN_ROAM_PARAMS = 2,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_LAZY_ROAM = 3,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BSSID_PREFS = 4,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BSSID_PARAMS = 5,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BLACKLIST_BSSID = 6,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET = 7,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_GET = 8,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR = 9,
+};
+
+enum qca_wlan_vendor_attr_gscan_config_params {
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_INVALID = 0,
+
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_REQUEST_ID = 1,
+
+ /* Attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_VALID_CHANNELS sub command.
+ */
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_WIFI_BAND
+ = 2,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_MAX_CHANNELS
+ = 3,
+
+ /* Attributes for input params used by
+ * QCA_NL80211_VENDOR_SUBCMD_GSCAN_START sub command.
+ */
+
+ /* Unsigned 32-bit value; channel frequency */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_CHANNEL = 4,
+ /* Unsigned 32-bit value; dwell time in ms. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_DWELL_TIME = 5,
+ /* Unsigned 8-bit value; 0: active; 1: passive; N/A for DFS */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_PASSIVE = 6,
+ /* Unsigned 8-bit value; channel class */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_CLASS = 7,
+
+ /* Unsigned 8-bit value; bucket index, 0 based */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_INDEX = 8,
+ /* Unsigned 8-bit value; band. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_BAND = 9,
+ /* Unsigned 32-bit value; desired period, in ms. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_PERIOD = 10,
+ /* Unsigned 8-bit value; report events semantics. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_REPORT_EVENTS = 11,
+ /* Unsigned 32-bit value. Followed by a nested array of
+ * GSCAN_CHANNEL_SPEC_* attributes.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS = 12,
+
+ /* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_* attributes.
+ * Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC = 13,
+
+ /* Unsigned 32-bit value; base timer period in ms. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_BASE_PERIOD = 14,
+ /* Unsigned 32-bit value; number of APs to store in each scan in the
+ * BSSID/RSSI history buffer (keep the highest RSSI APs).
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_MAX_AP_PER_SCAN = 15,
+ /* Unsigned 8-bit value; in %, when scan buffer is this much full, wake
+ * up AP.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_PERCENT
+ = 16,
+
+ /* Unsigned 8-bit value; number of scan bucket specs; followed by a
+ * nested array of_GSCAN_BUCKET_SPEC_* attributes and values. The size
+ * of the array is determined by NUM_BUCKETS.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS = 17,
+
+ /* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_* attributes.
+ * Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC = 18,
+
+ /* Unsigned 8-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_FLUSH
+ = 19,
+ /* Unsigned 32-bit value; maximum number of results to be returned. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_MAX
+ = 20,
+
+ /* An array of 6 x unsigned 8-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_BSSID = 21,
+ /* Signed 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_RSSI_LOW = 22,
+ /* Signed 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_RSSI_HIGH = 23,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_CHANNEL = 24,
+
+ /* Number of hotlist APs as unsigned 32-bit value, followed by a nested
+ * array of AP_THRESHOLD_PARAM attributes and values. The size of the
+ * array is determined by NUM_AP.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_BSSID_HOTLIST_PARAMS_NUM_AP = 25,
+
+ /* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_* attributes.
+ * Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM = 26,
+
+ /* Unsigned 32-bit value; number of samples for averaging RSSI. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_RSSI_SAMPLE_SIZE
+ = 27,
+ /* Unsigned 32-bit value; number of samples to confirm AP loss. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_LOST_AP_SAMPLE_SIZE
+ = 28,
+ /* Unsigned 32-bit value; number of APs breaching threshold. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_MIN_BREACHING = 29,
+ /* Unsigned 32-bit value; number of APs. Followed by an array of
+ * AP_THRESHOLD_PARAM attributes. Size of the array is NUM_AP.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_NUM_AP = 30,
+ /* Unsigned 32-bit value; number of samples to confirm AP loss. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_BSSID_HOTLIST_PARAMS_LOST_AP_SAMPLE_SIZE
+ = 31,
+ /* Unsigned 32-bit value. If max_period is non zero or different than
+ * period, then this bucket is an exponential backoff bucket.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_MAX_PERIOD = 32,
+ /* Unsigned 32-bit value. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_BASE = 33,
+ /* Unsigned 32-bit value. For exponential back off bucket, number of
+ * scans to perform for a given period.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_STEP_COUNT = 34,
+ /* Unsigned 8-bit value; in number of scans, wake up AP after these
+ * many scans.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_NUM_SCANS
+ = 35,
+
+ /* Attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SSID_HOTLIST sub command.
+ */
+ /* Unsigned 3-2bit value; number of samples to confirm SSID loss. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_HOTLIST_PARAMS_LOST_SSID_SAMPLE_SIZE
+ = 36,
+ /* Number of hotlist SSIDs as unsigned 32-bit value, followed by a
+ * nested array of SSID_THRESHOLD_PARAM_* attributes and values. The
+ * size of the array is determined by NUM_SSID.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_HOTLIST_PARAMS_NUM_SSID = 37,
+ /* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_*
+ * attributes.
+ * Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_HOTLIST_PARAMS_NUM_SSID
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM = 38,
+
+ /* An array of 33 x unsigned 8-bit value; NULL terminated SSID */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_SSID = 39,
+ /* Unsigned 8-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_BAND = 40,
+ /* Signed 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_RSSI_LOW = 41,
+ /* Signed 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_RSSI_HIGH = 42,
+ /* Unsigned 32-bit value; a bitmask with additional gscan config flag.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_CONFIGURATION_FLAGS = 43,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_MAX =
+ QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST - 1,
+};
+
+enum qca_wlan_vendor_attr_gscan_results {
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_INVALID = 0,
+
+ /* Unsigned 32-bit value; must match the request Id supplied by
+ * Wi-Fi HAL in the corresponding subcmd NL msg.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_REQUEST_ID = 1,
+
+ /* Unsigned 32-bit value; used to indicate the status response from
+ * firmware/driver for the vendor sub-command.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_STATUS = 2,
+
+ /* GSCAN Valid Channels attributes */
+ /* Unsigned 32bit value; followed by a nested array of CHANNELS. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_CHANNELS = 3,
+ /* An array of NUM_CHANNELS x unsigned 32-bit value integers
+ * representing channel numbers.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CHANNELS = 4,
+
+ /* GSCAN Capabilities attributes */
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SCAN_CACHE_SIZE = 5,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SCAN_BUCKETS = 6,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_AP_CACHE_PER_SCAN
+ = 7,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_RSSI_SAMPLE_SIZE
+ = 8,
+ /* Signed 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SCAN_REPORTING_THRESHOLD
+ = 9,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_BSSIDS = 10,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SIGNIFICANT_WIFI_CHANGE_APS
+ = 11,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_BSSID_HISTORY_ENTRIES
+ = 12,
+
+ /* GSCAN Attributes used with
+ * QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_RESULTS_AVAILABLE sub-command.
+ */
+
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE = 13,
+
+ /* GSCAN attributes used with
+ * QCA_NL80211_VENDOR_SUBCMD_GSCAN_FULL_SCAN_RESULT sub-command.
+ */
+
+ /* An array of NUM_RESULTS_AVAILABLE x
+ * QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_*
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST = 14,
+
+ /* Unsigned 64-bit value; age of sample at the time of retrieval */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_TIME_STAMP = 15,
+ /* 33 x unsigned 8-bit value; NULL terminated SSID */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_SSID = 16,
+ /* An array of 6 x unsigned 8-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_BSSID = 17,
+ /* Unsigned 32-bit value; channel frequency in MHz */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_CHANNEL = 18,
+ /* Signed 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_RSSI = 19,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_RTT = 20,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_RTT_SD = 21,
+ /* Unsigned 16-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_BEACON_PERIOD = 22,
+ /* Unsigned 16-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_CAPABILITY = 23,
+ /* Unsigned 32-bit value; size of the IE DATA blob */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_IE_LENGTH = 24,
+ /* An array of IE_LENGTH x unsigned 8-bit value; blob of all the
+ * information elements found in the beacon; this data should be a
+ * packed list of wifi_information_element objects, one after the
+ * other.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_IE_DATA = 25,
+
+ /* Unsigned 8-bit value; set by driver to indicate more scan results are
+ * available.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_MORE_DATA = 26,
+
+ /* GSCAN attributes for
+ * QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_EVENT sub-command.
+ */
+ /* Unsigned 8-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_EVENT_TYPE = 27,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_EVENT_STATUS = 28,
+
+ /* GSCAN attributes for
+ * QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_FOUND sub-command.
+ */
+ /* Use attr QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE
+ * to indicate number of results.
+ * Also, use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the
+ * list of results.
+ */
+
+ /* GSCAN attributes for
+ * QCA_NL80211_VENDOR_SUBCMD_GSCAN_SIGNIFICANT_CHANGE sub-command.
+ */
+ /* An array of 6 x unsigned 8-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_BSSID = 29,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_CHANNEL
+ = 30,
+ /* Unsigned 32-bit value. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_NUM_RSSI
+ = 31,
+ /* A nested array of signed 32-bit RSSI values. Size of the array is
+ * determined by (NUM_RSSI of SIGNIFICANT_CHANGE_RESULT_NUM_RSSI.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_RSSI_LIST
+ = 32,
+
+ /* GSCAN attributes used with
+ * QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CACHED_RESULTS sub-command.
+ */
+ /* Use attr QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE
+ * to indicate number of gscan cached results returned.
+ * Also, use QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_LIST to indicate
+ * the list of gscan cached results.
+ */
+
+ /* An array of NUM_RESULTS_AVAILABLE x
+ * QCA_NL80211_VENDOR_ATTR_GSCAN_CACHED_RESULTS_*
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_LIST = 33,
+ /* Unsigned 32-bit value; a unique identifier for the scan unit. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_SCAN_ID = 34,
+ /* Unsigned 32-bit value; a bitmask w/additional information about scan.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_FLAGS = 35,
+ /* Use attr QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE
+ * to indicate number of wifi scan results/bssids retrieved by the scan.
+ * Also, use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the
+ * list of wifi scan results returned for each cached result block.
+ */
+
+ /* GSCAN attributes for
+ * QCA_NL80211_VENDOR_SUBCMD_PNO_NETWORK_FOUND sub-command.
+ */
+ /* Use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE for
+ * number of results.
+ * Use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the nested
+ * list of wifi scan results returned for each
+ * wifi_passpoint_match_result block.
+ * Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE.
+ */
+
+ /* GSCAN attributes for
+ * QCA_NL80211_VENDOR_SUBCMD_PNO_PASSPOINT_NETWORK_FOUND sub-command.
+ */
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES
+ = 36,
+ /* A nested array of
+ * QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_*
+ * attributes. Array size =
+ * *_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_RESULT_LIST = 37,
+
+ /* Unsigned 32-bit value; network block id for the matched network */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_ID = 38,
+ /* Use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the nested
+ * list of wifi scan results returned for each
+ * wifi_passpoint_match_result block.
+ */
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP_LEN = 39,
+ /* An array size of PASSPOINT_MATCH_ANQP_LEN of unsigned 8-bit values;
+ * ANQP data in the information_element format.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP = 40,
+
+ /* Unsigned 32-bit value; a GSCAN Capabilities attribute. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_SSIDS = 41,
+ /* Unsigned 32-bit value; a GSCAN Capabilities attribute. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS = 42,
+ /* Unsigned 32-bit value; a GSCAN Capabilities attribute. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS_BY_SSID
+ = 43,
+ /* Unsigned 32-bit value; a GSCAN Capabilities attribute. */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_NUM_WHITELISTED_SSID
+ = 44,
+
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_BUCKETS_SCANNED = 45,
+
+ /* Unsigned 32-bit value; a GSCAN Capabilities attribute.
+ * This is used to limit the maximum number of BSSIDs while sending
+ * the vendor command QCA_NL80211_VENDOR_SUBCMD_ROAM with subcmd
+ * QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BLACKLIST_BSSID and attribute
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_MAX_NUM_BLACKLISTED_BSSID = 46,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_MAX =
+ QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_AFTER_LAST - 1,
+};
+
+enum qca_wlan_vendor_attr_pno_config_params {
+ QCA_WLAN_VENDOR_ATTR_PNO_INVALID = 0,
+ /* Attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_PNO_SET_PASSPOINT_LIST sub command.
+ */
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM = 1,
+ /* Array of nested QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_*
+ * attributes. Array size =
+ * QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM.
+ */
+ QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NETWORK_ARRAY = 2,
+
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ID = 3,
+ /* An array of 256 x unsigned 8-bit value; NULL terminated UTF-8 encoded
+ * realm, 0 if unspecified.
+ */
+ QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_REALM = 4,
+ /* An array of 16 x unsigned 32-bit value; roaming consortium ids to
+ * match, 0 if unspecified.
+ */
+ QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_CNSRTM_ID = 5,
+ /* An array of 6 x unsigned 8-bit value; MCC/MNC combination, 0s if
+ * unspecified.
+ */
+ QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_PLMN = 6,
+
+ /* Attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_PNO_SET_LIST sub command.
+ */
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS = 7,
+ /* Array of nested
+ * QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_*
+ * attributes. Array size =
+ * QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS.
+ */
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORKS_LIST = 8,
+ /* An array of 33 x unsigned 8-bit value; NULL terminated SSID */
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_SSID = 9,
+ /* Signed 8-bit value; threshold for considering this SSID as found,
+ * required granularity for this threshold is 4 dBm to 8 dBm.
+ */
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_RSSI_THRESHOLD
+ = 10,
+ /* Unsigned 8-bit value; WIFI_PNO_FLAG_XXX */
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_FLAGS = 11,
+ /* Unsigned 8-bit value; auth bit field for matching WPA IE */
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_AUTH_BIT = 12,
+ /* Unsigned 8-bit to indicate ePNO type;
+ * It takes values from qca_wlan_epno_type
+ */
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_TYPE = 13,
+
+ /* Nested attribute to send the channel list */
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_CHANNEL_LIST = 14,
+
+ /* Unsigned 32-bit value; indicates the interval between PNO scan
+ * cycles in msec.
+ */
+ QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_SCAN_INTERVAL = 15,
+ QCA_WLAN_VENDOR_ATTR_EPNO_MIN5GHZ_RSSI = 16,
+ QCA_WLAN_VENDOR_ATTR_EPNO_MIN24GHZ_RSSI = 17,
+ QCA_WLAN_VENDOR_ATTR_EPNO_INITIAL_SCORE_MAX = 18,
+ QCA_WLAN_VENDOR_ATTR_EPNO_CURRENT_CONNECTION_BONUS = 19,
+ QCA_WLAN_VENDOR_ATTR_EPNO_SAME_NETWORK_BONUS = 20,
+ QCA_WLAN_VENDOR_ATTR_EPNO_SECURE_BONUS = 21,
+ QCA_WLAN_VENDOR_ATTR_EPNO_BAND5GHZ_BONUS = 22,
+ /* Unsigned 32-bit value, representing the PNO Request ID */
+ QCA_WLAN_VENDOR_ATTR_PNO_CONFIG_REQUEST_ID = 23,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_PNO_MAX =
+ QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST - 1,
+};
+
+/**
+ * qca_wlan_vendor_acs_select_reason: This represents the different reasons why
+ * the ACS has to be triggered. These values are used by
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON and
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON
+ */
+enum qca_wlan_vendor_acs_select_reason {
+ /* Represents the reason that the ACS triggered during the AP start */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_INIT,
+ /* Represents the reason that DFS found with the current channel */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_DFS,
+ /* Represents the reason that LTE co-exist in the current band. */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_LTE_COEX,
+ /* Represents the reason that generic, uncategorized interference has
+ * been found in the current channel.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_GENERIC_INTERFERENCE,
+ /* Represents the reason that excessive 802.11 interference has been
+ * found in the current channel.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_80211_INTERFERENCE,
+ /* Represents the reason that generic Continuous Wave (CW) interference
+ * has been found in the current channel.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_CW_INTERFERENCE,
+ /* Represents the reason that Microwave Oven (MWO) interference has been
+ * found in the current channel.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_MWO_INTERFERENCE,
+ /* Represents the reason that generic Frequency-Hopping Spread Spectrum
+ * (FHSS) interference has been found in the current channel. This may
+ * include 802.11 waveforms.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_FHSS_INTERFERENCE,
+ /* Represents the reason that non-802.11 generic Frequency-Hopping
+ * Spread Spectrum (FHSS) interference has been found in the current
+ * channel.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_NON_80211_FHSS_INTERFERENCE,
+ /* Represents the reason that generic Wideband (WB) interference has
+ * been found in the current channel. This may include 802.11 waveforms.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_WB_INTERFERENCE,
+ /* Represents the reason that non-802.11 generic Wideband (WB)
+ * interference has been found in the current channel.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_NON_80211_WB_INTERFERENCE,
+ /* Represents the reason that Jammer interference has been found in the
+ * current channel.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_JAMMER_INTERFERENCE,
+};
+
+/**
+ * qca_wlan_vendor_attr_external_acs_policy: Attribute values for
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY to the vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This represents the
+ * external ACS policies to select the channels w.r.t. the PCL weights.
+ * (QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL represents the channels and
+ * their PCL weights.)
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_MANDATORY: Mandatory to
+ * select a channel with non-zero PCL weight.
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_PREFERRED: Prefer a
+ * channel with non-zero PCL weight.
+ *
+ */
+enum qca_wlan_vendor_attr_external_acs_policy {
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_PREFERRED,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_MANDATORY,
+};
+
+/**
+ * qca_wlan_vendor_channel_prop_flags: This represent the flags for a channel.
+ * This is used by QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS.
+ */
+enum qca_wlan_vendor_channel_prop_flags {
+ /* Bits 0, 1, 2, and 3 are reserved */
+
+ /* Turbo channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_TURBO = 1 << 4,
+ /* CCK channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_CCK = 1 << 5,
+ /* OFDM channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_OFDM = 1 << 6,
+ /* 2.4 GHz spectrum channel. */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_2GHZ = 1 << 7,
+ /* 5 GHz spectrum channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_5GHZ = 1 << 8,
+ /* Only passive scan allowed */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_PASSIVE = 1 << 9,
+ /* Dynamic CCK-OFDM channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_DYN = 1 << 10,
+ /* GFSK channel (FHSS PHY) */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_GFSK = 1 << 11,
+ /* Radar found on channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_RADAR = 1 << 12,
+ /* 11a static turbo channel only */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_STURBO = 1 << 13,
+ /* Half rate channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HALF = 1 << 14,
+ /* Quarter rate channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_QUARTER = 1 << 15,
+ /* HT 20 channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT20 = 1 << 16,
+ /* HT 40 with extension channel above */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40PLUS = 1 << 17,
+ /* HT 40 with extension channel below */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40MINUS = 1 << 18,
+ /* HT 40 intolerant */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40INTOL = 1 << 19,
+ /* VHT 20 channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT20 = 1 << 20,
+ /* VHT 40 with extension channel above */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT40PLUS = 1 << 21,
+ /* VHT 40 with extension channel below */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT40MINUS = 1 << 22,
+ /* VHT 80 channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT80 = 1 << 23,
+ /* HT 40 intolerant mark bit for ACS use */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40INTOLMARK = 1 << 24,
+ /* Channel temporarily blocked due to noise */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_BLOCKED = 1 << 25,
+ /* VHT 160 channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT160 = 1 << 26,
+ /* VHT 80+80 channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT80_80 = 1 << 27,
+ /* HE 20 channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE20 = 1 << 28,
+ /* HE 40 with extension channel above */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40PLUS = 1 << 29,
+ /* HE 40 with extension channel below */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40MINUS = 1 << 30,
+ /* HE 40 intolerant */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40INTOL = 1 << 31,
+};
+
+/**
+ * qca_wlan_vendor_channel_prop_flags_2: This represents the flags for a
+ * channel, and is a continuation of qca_wlan_vendor_channel_prop_flags. This is
+ * used by QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS_2.
+ */
+enum qca_wlan_vendor_channel_prop_flags_2 {
+ /* HE 40 intolerant mark bit for ACS use */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40INTOLMARK = 1 << 0,
+ /* HE 80 channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE80 = 1 << 1,
+ /* HE 160 channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE160 = 1 << 2,
+ /* HE 80+80 channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE80_80 = 1 << 3,
+};
+
+/**
+ * qca_wlan_vendor_channel_prop_flags_ext: This represent the extended flags for
+ * each channel. This is used by
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT.
+ */
+enum qca_wlan_vendor_channel_prop_flags_ext {
+ /* Radar found on channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_RADAR_FOUND = 1 << 0,
+ /* DFS required on channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS = 1 << 1,
+ /* DFS required on channel for 2nd band of 80+80 */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS_CFREQ2 = 1 << 2,
+ /* If channel has been checked for DFS */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS_CLEAR = 1 << 3,
+ /* Excluded in 802.11d */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_11D_EXCLUDED = 1 << 4,
+ /* Channel Switch Announcement received on this channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CSA_RECEIVED = 1 << 5,
+ /* Ad-hoc is not allowed */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_ADHOC = 1 << 6,
+ /* Station only channel */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_HOSTAP = 1 << 7,
+ /* DFS radar history for client device (STA mode) */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_HISTORY_RADAR = 1 << 8,
+ /* DFS CAC valid for client device (STA mode) */
+ QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CAC_VALID = 1 << 9,
+};
+
+/**
+ * qca_wlan_vendor_external_acs_event_chan_info_attr: Represents per channel
+ * information. These attributes are sent as part of
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO. Each set of the following
+ * attributes correspond to a single channel.
+ */
+enum qca_wlan_vendor_external_acs_event_chan_info_attr {
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_INVALID = 0,
+
+ /* A bitmask (u32) with flags specified in
+ * enum qca_wlan_vendor_channel_prop_flags.
+ */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS = 1,
+ /* A bitmask (u32) with flags specified in
+ * enum qca_wlan_vendor_channel_prop_flags_ext.
+ */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT = 2,
+ /* frequency in MHz (u32) */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ = 3,
+ /* maximum regulatory transmission power (u32) */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_REG_POWER = 4,
+ /* maximum transmission power (u32) */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_POWER = 5,
+ /* minimum transmission power (u32) */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MIN_POWER = 6,
+ /* regulatory class id (u8) */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_REG_CLASS_ID = 7,
+ /* maximum antenna gain in (u8) */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_ANTENNA_GAIN = 8,
+ /* VHT segment 0 (u8) */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0 = 9,
+ /* VHT segment 1 (u8) */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1 = 10,
+ /* A bitmask (u32) with flags specified in
+ * enum qca_wlan_vendor_channel_prop_flags_2.
+ */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS_2 = 11,
+
+ /*
+ * VHT segment 0 in MHz (u32) and the attribute is mandatory.
+ * Note: Event QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS includes
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0
+ * along with
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0.
+ *
+ * If both the driver and user-space application supports the 6 GHz
+ * band, QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0
+ * is deprecated and
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0
+ * should be used.
+ *
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0
+ * is still used if either of the driver or user space application
+ * doesn't support the 6 GHz band.
+ */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0 = 12,
+
+ /*
+ * VHT segment 1 in MHz (u32) and the attribute is mandatory.
+ * Note: Event QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS includes
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1
+ * along with
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1.
+ *
+ * If both the driver and user-space application supports the 6 GHz
+ * band, QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1
+ * is deprecated and
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1
+ * should be considered.
+ *
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1
+ * is still used if either of the driver or user space application
+ * doesn't support the 6 GHz band.
+ */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1 = 13,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST,
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX =
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST - 1,
+};
+
+/**
+ * qca_wlan_vendor_attr_pcl: Represents attributes for
+ * preferred channel list (PCL). These attributes are sent as part of
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL and
+ * QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST.
+ */
+enum qca_wlan_vendor_attr_pcl {
+ QCA_WLAN_VENDOR_ATTR_PCL_INVALID = 0,
+
+ /* Channel number (u8) */
+ QCA_WLAN_VENDOR_ATTR_PCL_CHANNEL = 1,
+ /* Channel weightage (u8) */
+ QCA_WLAN_VENDOR_ATTR_PCL_WEIGHT = 2,
+ /* Channel frequency (u32) in MHz */
+ QCA_WLAN_VENDOR_ATTR_PCL_FREQ = 3,
+ /* Channel flags (u32)
+ * bit 0 set: channel to be used for GO role,
+ * bit 1 set: channel to be used on CLI role,
+ * bit 2 set: channel must be considered for operating channel
+ * selection & peer chosen operating channel should be
+ * one of the channels with this flag set,
+ * bit 3 set: channel should be excluded in GO negotiation
+ */
+ QCA_WLAN_VENDOR_ATTR_PCL_FLAG = 4,
+};
+
+/**
+ * qca_wlan_vendor_attr_external_acs_event: Attribute to vendor sub-command
+ * QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This attribute will be sent by
+ * host driver.
+ */
+enum qca_wlan_vendor_attr_external_acs_event {
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_INVALID = 0,
+
+ /* This reason (u8) refers to enum qca_wlan_vendor_acs_select_reason.
+ * This helps ACS module to understand why ACS needs to be started.
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON = 1,
+ /* Flag attribute to indicate if driver supports spectral scanning */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_SPECTRAL_SUPPORTED = 2,
+ /* Flag attribute to indicate if 11ac is offloaded to firmware */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_OFFLOAD_ENABLED = 3,
+ /* Flag attribute to indicate if driver provides additional channel
+ * capability as part of scan operation
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_ADD_CHAN_STATS_SUPPORT = 4,
+ /* Flag attribute to indicate interface status is UP */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_AP_UP = 5,
+ /* Operating mode (u8) of interface. Takes one of enum nl80211_iftype
+ * values.
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_SAP_MODE = 6,
+ /* Channel width (u8). It takes one of enum nl80211_chan_width values.
+ * This is the upper bound of channel width. ACS logic should try to get
+ * a channel with the specified width and if not found, look for lower
+ * values.
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_WIDTH = 7,
+ /* This (u8) will hold values of one of enum nl80211_bands */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_BAND = 8,
+ /* PHY/HW mode (u8). Takes one of enum qca_wlan_vendor_acs_hw_mode
+ * values
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PHY_MODE = 9,
+ /* Array of (u32) supported frequency list among which ACS should choose
+ * best frequency.
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_FREQ_LIST = 10,
+ /* Preferred channel list by the driver which will have array of nested
+ * values as per enum qca_wlan_vendor_attr_pcl attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL = 11,
+ /* Array of nested attribute for each channel. It takes attr as defined
+ * in enum qca_wlan_vendor_external_acs_event_chan_info_attr.
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO = 12,
+ /* External ACS policy such as PCL mandatory, PCL preferred, etc.
+ * It uses values defined in enum
+ * qca_wlan_vendor_attr_external_acs_policy.
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY = 13,
+ /* Reference RF Operating Parameter (RROP) availability information
+ * (u16). It uses values defined in enum
+ * qca_wlan_vendor_attr_rropavail_info.
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_RROPAVAIL_INFO = 14,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_MAX =
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_external_acs_channels: Attributes to vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This carries a list of channels
+ * in priority order as decided after ACS operation in userspace.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON: Required (u8).
+ * One of reason code from enum qca_wlan_vendor_acs_select_reason.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST: Required
+ * Array of nested values for each channel with following attributes:
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST is deprecated and use
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_LIST.
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST
+ * is still used if either of the driver or user space application doesn't
+ * support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY: Required (u8).
+ * Primary channel number
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY is deprecated and use
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_PRIMARY.
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY
+ * is still used if either of the driver or user space application doesn't
+ * support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY: Required (u8).
+ * Secondary channel number, required only for 160 and 80+80 MHz bandwidths.
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY is deprecated and use
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY.
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY
+ * is still used if either of the driver or user space application
+ * doesn't support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0: Required (u8).
+ * VHT seg0 channel number
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0 is deprecated and use
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0.
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0
+ * is still used if either of the driver or user space application
+ * doesn't support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1: Required (u8).
+ * VHT seg1 channel number
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1 is deprecated and use
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1.
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1
+ * is still used if either of the driver or user space application
+ * doesn't support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH: Required (u8).
+ * Takes one of enum nl80211_chan_width values.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_LIST: Required
+ * Array of nested values for each channel with following attributes:
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_PRIMARY in MHz (u32),
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY in MHz (u32),
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0 in MHz (u32),
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1 in MHz (u32),
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH
+ * Note: If user-space application has no support of the 6 GHz band, this
+ * attribute is optional.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_PRIMARY: Required (u32)
+ * Primary channel frequency in MHz
+ * Note: If user-space application has no support of the 6 GHz band, this
+ * attribute is optional.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY: Required (u32)
+ * Secondary channel frequency in MHz used for HT 40 MHz channels.
+ * Note: If user-space application has no support of the 6 GHz band, this
+ * attribute is optional.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0: Required (u32)
+ * VHT seg0 channel frequency in MHz
+ * Note: If user-space application has no support of the 6GHz band, this
+ * attribute is optional.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1: Required (u32)
+ * VHT seg1 channel frequency in MHz
+ * Note: If user-space application has no support of the 6 GHz band, this
+ * attribute is optional.
+ */
+enum qca_wlan_vendor_attr_external_acs_channels {
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_INVALID = 0,
+
+ /* One of reason code (u8) from enum qca_wlan_vendor_acs_select_reason
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON = 1,
+
+ /* Array of nested values for each channel with following attributes:
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_BAND,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH
+ */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST = 2,
+ /* This (u8) will hold values of one of enum nl80211_bands */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_BAND = 3,
+ /* Primary channel (u8) */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY = 4,
+ /* Secondary channel (u8) used for HT 40 MHz channels */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY = 5,
+ /* VHT seg0 channel (u8) */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0 = 6,
+ /* VHT seg1 channel (u8) */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1 = 7,
+ /* Channel width (u8). Takes one of enum nl80211_chan_width values. */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH = 8,
+
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_LIST = 9,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_PRIMARY = 10,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY = 11,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0 = 12,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1 = 13,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_MAX =
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST - 1
+};
+
+enum qca_chip_power_save_failure_reason {
+ /* Indicates if the reason for the failure is due to a protocol
+ * layer/module.
+ */
+ QCA_CHIP_POWER_SAVE_FAILURE_REASON_PROTOCOL = 0,
+ /* Indicates if the reason for the failure is due to a hardware issue.
+ */
+ QCA_CHIP_POWER_SAVE_FAILURE_REASON_HARDWARE = 1,
+};
+
+/**
+ * qca_attr_chip_power_save_failure: Attributes to vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE. This carries the requisite
+ * information leading to the power save failure.
+ */
+enum qca_attr_chip_power_save_failure {
+ QCA_ATTR_CHIP_POWER_SAVE_FAILURE_INVALID = 0,
+ /* Reason to cause the power save failure.
+ * These reasons are represented by
+ * enum qca_chip_power_save_failure_reason.
+ */
+ QCA_ATTR_CHIP_POWER_SAVE_FAILURE_REASON = 1,
+
+ /* keep last */
+ QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST,
+ QCA_ATTR_CHIP_POWER_SAVE_FAILURE_MAX =
+ QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST - 1,
+};
+
+/**
+ * qca_wlan_vendor_nud_stats_data_pkt_flags: Flag representing the various
+ * data types for which the stats have to get collected.
+ */
+enum qca_wlan_vendor_nud_stats_data_pkt_flags {
+ QCA_WLAN_VENDOR_NUD_STATS_DATA_ARP = 1 << 0,
+ QCA_WLAN_VENDOR_NUD_STATS_DATA_DNS = 1 << 1,
+ QCA_WLAN_VENDOR_NUD_STATS_DATA_TCP_HANDSHAKE = 1 << 2,
+ QCA_WLAN_VENDOR_NUD_STATS_DATA_ICMPV4 = 1 << 3,
+ QCA_WLAN_VENDOR_NUD_STATS_DATA_ICMPV6 = 1 << 4,
+ /* Used by QCA_ATTR_NUD_STATS_PKT_TYPE only in nud stats get
+ * to represent the stats of respective data type.
+ */
+ QCA_WLAN_VENDOR_NUD_STATS_DATA_TCP_SYN = 1 << 5,
+ QCA_WLAN_VENDOR_NUD_STATS_DATA_TCP_SYN_ACK = 1 << 6,
+ QCA_WLAN_VENDOR_NUD_STATS_DATA_TCP_ACK = 1 << 7,
+};
+
+enum qca_wlan_vendor_nud_stats_set_data_pkt_info {
+ QCA_ATTR_NUD_STATS_DATA_PKT_INFO_INVALID = 0,
+ /* Represents the data packet type to be monitored (u32).
+ * Host driver tracks the stats corresponding to each data frame
+ * represented by these flags.
+ * These data packets are represented by
+ * enum qca_wlan_vendor_nud_stats_data_pkt_flags
+ */
+ QCA_ATTR_NUD_STATS_DATA_PKT_INFO_TYPE = 1,
+ /* Name corresponding to the DNS frame for which the respective DNS
+ * stats have to get monitored (string). Max string length 255.
+ */
+ QCA_ATTR_NUD_STATS_DATA_PKT_INFO_DNS_DOMAIN_NAME = 2,
+ /* source port on which the respective proto stats have to get
+ * collected (u32).
+ */
+ QCA_ATTR_NUD_STATS_DATA_PKT_INFO_SRC_PORT = 3,
+ /* destination port on which the respective proto stats have to get
+ * collected (u32).
+ */
+ QCA_ATTR_NUD_STATS_DATA_PKT_INFO_DEST_PORT = 4,
+ /* IPv4 address for which the destined data packets have to be
+ * monitored. (in network byte order), u32.
+ */
+ QCA_ATTR_NUD_STATS_DATA_PKT_INFO_DEST_IPV4 = 5,
+ /* IPv6 address for which the destined data packets have to be
+ * monitored. (in network byte order), 16 bytes array.
+ */
+ QCA_ATTR_NUD_STATS_DATA_PKT_INFO_DEST_IPV6 = 6,
+
+ QCA_ATTR_NUD_STATS_DATA_PKT_INFO_LAST,
+ QCA_ATTR_NUD_STATS_DATA_PKT_INFO_MAX =
+ QCA_ATTR_NUD_STATS_DATA_PKT_INFO_LAST - 1,
+};
+
+/**
+ * qca_wlan_vendor_attr_nud_stats_set: Attributes to vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET. This carries the requisite
+ * information to start/stop the NUD statistics collection.
+ */
+enum qca_attr_nud_stats_set {
+ QCA_ATTR_NUD_STATS_SET_INVALID = 0,
+
+ /* Flag to start/stop the NUD statistics collection.
+ * Start - If included, Stop - If not included
+ */
+ QCA_ATTR_NUD_STATS_SET_START = 1,
+ /* IPv4 address of the default gateway (in network byte order), u32 */
+ QCA_ATTR_NUD_STATS_GW_IPV4 = 2,
+ /* Represents the list of data packet types to be monitored.
+ * Host driver tracks the stats corresponding to each data frame
+ * represented by these flags.
+ * These data packets are represented by
+ * enum qca_wlan_vendor_nud_stats_set_data_pkt_info
+ */
+ QCA_ATTR_NUD_STATS_SET_DATA_PKT_INFO = 3,
+
+ /* keep last */
+ QCA_ATTR_NUD_STATS_SET_LAST,
+ QCA_ATTR_NUD_STATS_SET_MAX =
+ QCA_ATTR_NUD_STATS_SET_LAST - 1,
+};
+
+enum qca_attr_nud_data_stats {
+ QCA_ATTR_NUD_DATA_STATS_INVALID = 0,
+ /* Data packet type for which the stats are collected (u32).
+ * Represented by enum qca_wlan_vendor_nud_stats_data_pkt_flags
+ */
+ QCA_ATTR_NUD_STATS_PKT_TYPE = 1,
+ /* Name corresponding to the DNS frame for which the respective DNS
+ * stats are monitored (string). Max string length 255.
+ */
+ QCA_ATTR_NUD_STATS_PKT_DNS_DOMAIN_NAME = 2,
+ /* source port on which the respective proto stats are collected (u32).
+ */
+ QCA_ATTR_NUD_STATS_PKT_SRC_PORT = 3,
+ /* destination port on which the respective proto stats are collected
+ * (u32).
+ */
+ QCA_ATTR_NUD_STATS_PKT_DEST_PORT = 4,
+ /* IPv4 address for which the destined data packets have to be
+ * monitored. (in network byte order), u32.
+ */
+ QCA_ATTR_NUD_STATS_PKT_DEST_IPV4 = 5,
+ /* IPv6 address for which the destined data packets have to be
+ * monitored. (in network byte order), 16 bytes array.
+ */
+ QCA_ATTR_NUD_STATS_PKT_DEST_IPV6 = 6,
+ /* Data packet Request count received from netdev (u32). */
+ QCA_ATTR_NUD_STATS_PKT_REQ_COUNT_FROM_NETDEV = 7,
+ /* Data packet Request count sent to lower MAC from upper MAC (u32). */
+ QCA_ATTR_NUD_STATS_PKT_REQ_COUNT_TO_LOWER_MAC = 8,
+ /* Data packet Request count received by lower MAC from upper MAC
+ * (u32)
+ */
+ QCA_ATTR_NUD_STATS_PKT_REQ_RX_COUNT_BY_LOWER_MAC = 9,
+ /* Data packet Request count successfully transmitted by the device
+ * (u32)
+ */
+ QCA_ATTR_NUD_STATS_PKT_REQ_COUNT_TX_SUCCESS = 10,
+ /* Data packet Response count received by lower MAC (u32) */
+ QCA_ATTR_NUD_STATS_PKT_RSP_RX_COUNT_BY_LOWER_MAC = 11,
+ /* Data packet Response count received by upper MAC (u32) */
+ QCA_ATTR_NUD_STATS_PKT_RSP_RX_COUNT_BY_UPPER_MAC = 12,
+ /* Data packet Response count delivered to netdev (u32) */
+ QCA_ATTR_NUD_STATS_PKT_RSP_COUNT_TO_NETDEV = 13,
+ /* Data Packet Response count that are dropped out of order (u32) */
+ QCA_ATTR_NUD_STATS_PKT_RSP_COUNT_OUT_OF_ORDER_DROP = 14,
+
+ /* keep last */
+ QCA_ATTR_NUD_DATA_STATS_LAST,
+ QCA_ATTR_NUD_DATA_STATS_MAX =
+ QCA_ATTR_NUD_DATA_STATS_LAST - 1,
+};
+
+/**
+ * qca_attr_nud_stats_get: Attributes to vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET. This carries the requisite
+ * NUD statistics collected when queried.
+ */
+enum qca_attr_nud_stats_get {
+ QCA_ATTR_NUD_STATS_GET_INVALID = 0,
+ /* ARP Request count from netdev (u32) */
+ QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_FROM_NETDEV = 1,
+ /* ARP Request count sent to lower MAC from upper MAC (u32) */
+ QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_TO_LOWER_MAC = 2,
+ /* ARP Request count received by lower MAC from upper MAC (u32) */
+ QCA_ATTR_NUD_STATS_ARP_REQ_RX_COUNT_BY_LOWER_MAC = 3,
+ /* ARP Request count successfully transmitted by the device (u32) */
+ QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_TX_SUCCESS = 4,
+ /* ARP Response count received by lower MAC (u32) */
+ QCA_ATTR_NUD_STATS_ARP_RSP_RX_COUNT_BY_LOWER_MAC = 5,
+ /* ARP Response count received by upper MAC (u32) */
+ QCA_ATTR_NUD_STATS_ARP_RSP_RX_COUNT_BY_UPPER_MAC = 6,
+ /* ARP Response count delivered to netdev (u32) */
+ QCA_ATTR_NUD_STATS_ARP_RSP_COUNT_TO_NETDEV = 7,
+ /* ARP Response count dropped due to out of order reception (u32) */
+ QCA_ATTR_NUD_STATS_ARP_RSP_COUNT_OUT_OF_ORDER_DROP = 8,
+ /* Flag indicating if the station's link to the AP is active.
+ * Active Link - If included, Inactive link - If not included
+ */
+ QCA_ATTR_NUD_STATS_AP_LINK_ACTIVE = 9,
+ /* Flag indicating if there is any duplicate address detected (DAD).
+ * Yes - If detected, No - If not detected.
+ */
+ QCA_ATTR_NUD_STATS_IS_DAD = 10,
+ /* List of Data packet types for which the stats are requested.
+ * This list does not carry ARP stats as they are done by the
+ * above attributes. Represented by enum qca_attr_nud_data_stats.
+ */
+ QCA_ATTR_NUD_STATS_DATA_PKT_STATS = 11,
+
+ /* keep last */
+ QCA_ATTR_NUD_STATS_GET_LAST,
+ QCA_ATTR_NUD_STATS_GET_MAX =
+ QCA_ATTR_NUD_STATS_GET_LAST - 1,
+};
+
+enum qca_wlan_btm_candidate_status {
+ QCA_STATUS_ACCEPT = 0,
+ QCA_STATUS_REJECT_EXCESSIVE_FRAME_LOSS_EXPECTED = 1,
+ QCA_STATUS_REJECT_EXCESSIVE_DELAY_EXPECTED = 2,
+ QCA_STATUS_REJECT_INSUFFICIENT_QOS_CAPACITY = 3,
+ QCA_STATUS_REJECT_LOW_RSSI = 4,
+ QCA_STATUS_REJECT_HIGH_INTERFERENCE = 5,
+ QCA_STATUS_REJECT_UNKNOWN = 6,
+};
+
+enum qca_wlan_vendor_attr_btm_candidate_info {
+ QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_INVALID = 0,
+
+ /* 6-byte MAC address representing the BSSID of transition candidate */
+ QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID = 1,
+ /* Unsigned 32-bit value from enum qca_wlan_btm_candidate_status
+ * returned by the driver. It says whether the BSSID provided in
+ * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID is acceptable by
+ * the driver, if not it specifies the reason for rejection.
+ * Note that the user-space can overwrite the transition reject reason
+ * codes provided by driver based on more information.
+ */
+ QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_STATUS = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_MAX =
+ QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_AFTER_LAST - 1,
+};
+
+enum qca_attr_trace_level {
+ QCA_ATTR_TRACE_LEVEL_INVALID = 0,
+ /*
+ * Nested array of the following attributes:
+ * QCA_ATTR_TRACE_LEVEL_MODULE,
+ * QCA_ATTR_TRACE_LEVEL_MASK.
+ */
+ QCA_ATTR_TRACE_LEVEL_PARAM = 1,
+ /*
+ * Specific QCA host driver module. Please refer to the QCA host
+ * driver implementation to get the specific module ID.
+ */
+ QCA_ATTR_TRACE_LEVEL_MODULE = 2,
+ /* Different trace level masks represented in the QCA host driver. */
+ QCA_ATTR_TRACE_LEVEL_MASK = 3,
+
+ /* keep last */
+ QCA_ATTR_TRACE_LEVEL_AFTER_LAST,
+ QCA_ATTR_TRACE_LEVEL_MAX =
+ QCA_ATTR_TRACE_LEVEL_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_get_he_capabilities - IEEE 802.11ax HE capabilities
+ */
+enum qca_wlan_vendor_attr_get_he_capabilities {
+ QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_INVALID = 0,
+ /* Whether HE capabilities is supported
+ * (u8 attribute: 0 = not supported, 1 = supported)
+ */
+ QCA_WLAN_VENDOR_ATTR_HE_SUPPORTED = 1,
+ /* HE PHY capabilities, array of 3 u32 values */
+ QCA_WLAN_VENDOR_ATTR_PHY_CAPAB = 2,
+ /* HE MAC capabilities (u32 attribute) */
+ QCA_WLAN_VENDOR_ATTR_MAC_CAPAB = 3,
+ /* HE MCS map (u32 attribute) */
+ QCA_WLAN_VENDOR_ATTR_HE_MCS = 4,
+ /* Number of SS (u32 attribute) */
+ QCA_WLAN_VENDOR_ATTR_NUM_SS = 5,
+ /* RU count (u32 attribute) */
+ QCA_WLAN_VENDOR_ATTR_RU_IDX_MASK = 6,
+ /* PPE threshold data, array of 8 u32 values */
+ QCA_WLAN_VENDOR_ATTR_PPE_THRESHOLD = 7,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_MAX =
+ QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_spectral_scan - Spectral scan config parameters
+ */
+enum qca_wlan_vendor_attr_spectral_scan {
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_INVALID = 0,
+ /* Number of times the chip enters spectral scan mode before
+ * deactivating spectral scans. When set to 0, chip will enter spectral
+ * scan mode continuously. u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SCAN_COUNT = 1,
+ /* Spectral scan period. Period increment resolution is 256*Tclk,
+ * where Tclk = 1/44 MHz (Gmode), 1/40 MHz (Amode). u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SCAN_PERIOD = 2,
+ /* Spectral scan priority. u32 attribute. */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_PRIORITY = 3,
+ /* Number of FFT data points to compute. u32 attribute. */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FFT_SIZE = 4,
+ /* Enable targeted gain change before starting the spectral scan FFT.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_GC_ENA = 5,
+ /* Restart a queued spectral scan. u32 attribute. */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RESTART_ENA = 6,
+ /* Noise floor reference number for the calculation of bin power.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_NOISE_FLOOR_REF = 7,
+ /* Disallow spectral scan triggers after TX/RX packets by setting
+ * this delay value to roughly SIFS time period or greater.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_INIT_DELAY = 8,
+ /* Number of strong bins (inclusive) per sub-channel, below
+ * which a signal is declared a narrow band tone. u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_NB_TONE_THR = 9,
+ /* Specify the threshold over which a bin is declared strong (for
+ * scan bandwidth analysis). u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_STR_BIN_THR = 10,
+ /* Spectral scan report mode. u32 attribute. */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_WB_RPT_MODE = 11,
+ /* RSSI report mode, if the ADC RSSI is below
+ * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RSSI_THR,
+ * then FFTs will not trigger, but timestamps and summaries get
+ * reported. u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RSSI_RPT_MODE = 12,
+ /* ADC RSSI must be greater than or equal to this threshold (signed dB)
+ * to ensure spectral scan reporting with normal error code.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RSSI_THR = 13,
+ /* Format of frequency bin magnitude for spectral scan triggered FFTs:
+ * 0: linear magnitude, 1: log magnitude (20*log10(lin_mag)).
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_PWR_FORMAT = 14,
+ /* Format of FFT report to software for spectral scan triggered FFTs.
+ * 0: No FFT report (only spectral scan summary report)
+ * 1: 2-dword summary of metrics for each completed FFT + spectral scan
+ * report
+ * 2: 2-dword summary of metrics for each completed FFT + 1x-oversampled
+ * bins (in-band) per FFT + spectral scan summary report
+ * 3: 2-dword summary of metrics for each completed FFT + 2x-oversampled
+ * bins (all) per FFT + spectral scan summary report
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RPT_MODE = 15,
+ /* Number of LSBs to shift out in order to scale the FFT bins.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_BIN_SCALE = 16,
+ /* Set to 1 (with spectral_scan_pwr_format=1), to report bin magnitudes
+ * in dBm power. u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DBM_ADJ = 17,
+ /* Per chain enable mask to select input ADC for search FFT.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_CHN_MASK = 18,
+ /* An unsigned 64-bit integer provided by host driver to identify the
+ * spectral scan request. This attribute is included in the scan
+ * response message for @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START
+ * and used as an attribute in
+ * @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP to identify the
+ * specific scan to be stopped.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE = 19,
+ /* Skip interval for FFT reports. u32 attribute */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FFT_PERIOD = 20,
+ /* Set to report only one set of FFT results.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SHORT_REPORT = 21,
+ /* Debug level for spectral module in driver.
+ * 0 : Verbosity level 0
+ * 1 : Verbosity level 1
+ * 2 : Verbosity level 2
+ * 3 : Matched filterID display
+ * 4 : One time dump of FFT report
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DEBUG_LEVEL = 22,
+ /* Type of spectral scan request. u32 attribute.
+ * It uses values defined in enum
+ * qca_wlan_vendor_attr_spectral_scan_request_type.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE = 23,
+ /* This specifies the frequency span over which spectral
+ * scan would be carried out. Its value depends on the
+ * value of QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE and
+ * the relation is as follows.
+ * QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL
+ * Not applicable. Spectral scan would happen in the
+ * operating span.
+ * QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE
+ * Center frequency (in MHz) of the span of interest or
+ * for convenience, center frequency (in MHz) of any channel
+ * in the span of interest. For 80+80 MHz agile spectral scan
+ * request it represents center frequency (in MHz) of the primary
+ * 80 MHz span or for convenience, center frequency (in MHz) of any
+ * channel in the primary 80 MHz span. If agile spectral scan is
+ * initiated without setting a valid frequency it returns the
+ * error code
+ * (QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_NOT_INITIALIZED).
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FREQUENCY = 24,
+ /* Spectral scan mode. u32 attribute.
+ * It uses values defined in enum qca_wlan_vendor_spectral_scan_mode.
+ * If this attribute is not present, it is assumed to be
+ * normal mode (QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL).
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE = 25,
+ /* Spectral scan error code. u32 attribute.
+ * It uses values defined in enum
+ * qca_wlan_vendor_spectral_scan_error_code.
+ * This attribute is included only in failure scenarios.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_ERROR_CODE = 26,
+ /* 8-bit unsigned value to enable/disable debug of the
+ * Spectral DMA ring.
+ * 1-enable, 0-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DMA_RING_DEBUG = 27,
+ /* 8-bit unsigned value to enable/disable debug of the
+ * Spectral DMA buffers.
+ * 1-enable, 0-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DMA_BUFFER_DEBUG = 28,
+ /* This specifies the frequency span over which spectral scan would be
+ * carried out. Its value depends on the value of
+ * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE and the relation is as
+ * follows.
+ * QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL
+ * Not applicable. Spectral scan would happen in the operating span.
+ * QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE
+ * This attribute is applicable only for agile spectral scan
+ * requests in 80+80 MHz mode. It represents center frequency (in
+ * MHz) of the secondary 80 MHz span or for convenience, center
+ * frequency (in MHz) of any channel in the secondary 80 MHz span.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FREQUENCY_2 = 29,
+ /* This attribute specifies the bandwidth to be used for spectral scan
+ * operation. This is an u8 attribute and uses the values in enum
+ * nl80211_chan_width. This is an optional attribute.
+ * If this attribute is not populated, the driver should configure the
+ * spectral scan bandwidth to the maximum value supported by the target
+ * for the current operating bandwidth.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_BANDWIDTH = 30,
+
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_spectral_diag_stats - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS.
+ */
+enum qca_wlan_vendor_attr_spectral_diag_stats {
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_INVALID = 0,
+ /* Number of spectral TLV signature mismatches.
+ * u64 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_SIG_MISMATCH = 1,
+ /* Number of spectral phyerror events with insufficient length when
+ * parsing for secondary 80 search FFT report. u64 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_SEC80_SFFT_INSUFFLEN = 2,
+ /* Number of spectral phyerror events without secondary 80
+ * search FFT report. u64 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_NOSEC80_SFFT = 3,
+ /* Number of spectral phyerror events with vht operation segment 1 id
+ * mismatches in search fft report. u64 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_VHTSEG1ID_MISMATCH = 4,
+ /* Number of spectral phyerror events with vht operation segment 2 id
+ * mismatches in search fft report. u64 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_VHTSEG2ID_MISMATCH = 5,
+
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_MAX =
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_spectral_cap - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO.
+ */
+enum qca_wlan_vendor_attr_spectral_cap {
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_INVALID = 0,
+ /* Flag attribute to indicate phydiag capability */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_PHYDIAG = 1,
+ /* Flag attribute to indicate radar detection capability */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_RADAR = 2,
+ /* Flag attribute to indicate spectral capability */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_SPECTRAL = 3,
+ /* Flag attribute to indicate advanced spectral capability */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_ADVANCED_SPECTRAL = 4,
+ /* Spectral hardware generation. u32 attribute.
+ * It uses values defined in enum
+ * qca_wlan_vendor_spectral_scan_cap_hw_gen.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HW_GEN = 5,
+ /* Spectral bin scaling formula ID. u16 attribute.
+ * It uses values defined in enum
+ * qca_wlan_vendor_spectral_scan_cap_formula_id.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_FORMULA_ID = 6,
+ /* Spectral bin scaling param - low level offset.
+ * s16 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_LOW_LEVEL_OFFSET = 7,
+ /* Spectral bin scaling param - high level offset.
+ * s16 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HIGH_LEVEL_OFFSET = 8,
+ /* Spectral bin scaling param - RSSI threshold.
+ * s16 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_RSSI_THR = 9,
+ /* Spectral bin scaling param - default AGC max gain.
+ * u8 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_DEFAULT_AGC_MAX_GAIN = 10,
+ /* Flag attribute to indicate agile spectral scan capability
+ * for 20/40/80 MHz modes.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AGILE_SPECTRAL = 11,
+ /* Flag attribute to indicate agile spectral scan capability
+ * for 160 MHz mode.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AGILE_SPECTRAL_160 = 12,
+ /* Flag attribute to indicate agile spectral scan capability
+ * for 80+80 MHz mode.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AGILE_SPECTRAL_80_80 = 13,
+ /* Number of spectral detectors used for scan in 20 MHz.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_NUM_DETECTORS_20_MHZ = 14,
+ /* Number of spectral detectors used for scan in 40 MHz.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_NUM_DETECTORS_40_MHZ = 15,
+ /* Number of spectral detectors used for scan in 80 MHz.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_NUM_DETECTORS_80_MHZ = 16,
+ /* Number of spectral detectors used for scan in 160 MHz.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_NUM_DETECTORS_160_MHZ = 17,
+ /* Number of spectral detectors used for scan in 80+80 MHz.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_NUM_DETECTORS_80P80_MHZ = 18,
+ /* Flag attribute to indicate agile spectral scan capability
+ * for 320 MHz mode.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AGILE_SPECTRAL_320 = 19,
+ /* Number of spectral detectors used for scan in 320 MHz.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_NUM_DETECTORS_320_MHZ = 20,
+
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_MAX =
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_spectral_scan_status - used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS.
+ */
+enum qca_wlan_vendor_attr_spectral_scan_status {
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_INVALID = 0,
+ /* Flag attribute to indicate whether spectral scan is enabled */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ENABLED = 1,
+ /* Flag attribute to indicate whether spectral scan is in progress*/
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ACTIVE = 2,
+ /* Spectral scan mode. u32 attribute.
+ * It uses values defined in enum qca_wlan_vendor_spectral_scan_mode.
+ * If this attribute is not present, normal mode
+ * (QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL is assumed to be
+ * requested.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MODE = 3,
+
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MAX =
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_AFTER_LAST - 1,
+};
+
+/**
+ * qca_wlan_vendor_attr_spectral_scan_request_type: Attribute values for
+ * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE to the vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START. This represents the
+ * spectral scan request types.
+ * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN_AND_CONFIG: Request to
+ * set the spectral parameters and start scan.
+ * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN: Request to
+ * only set the spectral parameters.
+ * @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_CONFIG: Request to
+ * only start the spectral scan.
+ */
+enum qca_wlan_vendor_attr_spectral_scan_request_type {
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN_AND_CONFIG,
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN,
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_CONFIG,
+};
+
+/**
+ * qca_wlan_vendor_spectral_scan_mode: Attribute values for
+ * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE in the vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START and
+ * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MODE in the vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS. This represents the
+ * spectral scan modes.
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL: Normal spectral scan:
+ * spectral scan in the current operating span.
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE: Agile spectral scan:
+ * spectral scan in the configured agile span.
+ */
+enum qca_wlan_vendor_spectral_scan_mode {
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL = 0,
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE = 1,
+};
+
+/**
+ * qca_wlan_vendor_spectral_scan_error_code: Attribute values for
+ * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_ERROR_CODE in the vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START.
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_UNSUPPORTED: Changing the value
+ * of a parameter is not supported.
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_MODE_UNSUPPORTED: Requested spectral scan
+ * mode is not supported.
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_INVALID_VALUE: A parameter
+ * has invalid value.
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_NOT_INITIALIZED: A parameter
+ * is not initialized.
+ */
+enum qca_wlan_vendor_spectral_scan_error_code {
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_UNSUPPORTED = 0,
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_MODE_UNSUPPORTED = 1,
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_INVALID_VALUE = 2,
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_NOT_INITIALIZED = 3,
+};
+
+/**
+ * qca_wlan_vendor_spectral_scan_cap_hw_gen: Attribute values for
+ * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HW_GEN to the vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO. This represents the
+ * spectral hardware generation.
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_1: generation 1
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_2: generation 2
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_3: generation 3
+ */
+enum qca_wlan_vendor_spectral_scan_cap_hw_gen {
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_1 = 0,
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_2 = 1,
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_3 = 2,
+};
+
+enum qca_wlan_vendor_tos {
+ QCA_WLAN_VENDOR_TOS_BK = 0,
+ QCA_WLAN_VENDOR_TOS_BE = 1,
+ QCA_WLAN_VENDOR_TOS_VI = 2,
+ QCA_WLAN_VENDOR_TOS_VO = 3,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_active_tos - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS.
+ */
+enum qca_wlan_vendor_attr_active_tos {
+ QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS_INVALID = 0,
+ /* Type Of Service - Represented by qca_wlan_vendor_tos */
+ QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS = 1,
+ /* Flag attribute representing the start (attribute included) or stop
+ * (attribute not included) of the respective TOS.
+ */
+ QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS_START = 2,
+};
+
+enum qca_wlan_vendor_hang_reason {
+ /* Unspecified reason */
+ QCA_WLAN_HANG_REASON_UNSPECIFIED = 0,
+ /* No Map for the MAC entry for the received frame */
+ QCA_WLAN_HANG_RX_HASH_NO_ENTRY_FOUND = 1,
+ /* Peer deletion timeout happened */
+ QCA_WLAN_HANG_PEER_DELETION_TIMEDOUT = 2,
+ /* Peer unmap timeout */
+ QCA_WLAN_HANG_PEER_UNMAP_TIMEDOUT = 3,
+ /* Scan request timed out */
+ QCA_WLAN_HANG_SCAN_REQ_EXPIRED = 4,
+ /* Consecutive Scan attempt failures */
+ QCA_WLAN_HANG_SCAN_ATTEMPT_FAILURES = 5,
+ /* Unable to get the message buffer */
+ QCA_WLAN_HANG_GET_MSG_BUFF_FAILURE = 6,
+ /* Current command processing is timedout */
+ QCA_WLAN_HANG_ACTIVE_LIST_TIMEOUT = 7,
+ /* Timeout for an ACK from FW for suspend request */
+ QCA_WLAN_HANG_SUSPEND_TIMEOUT = 8,
+ /* Timeout for an ACK from FW for resume request */
+ QCA_WLAN_HANG_RESUME_TIMEOUT = 9,
+ /* Transmission timeout for consecutive data frames */
+ QCA_WLAN_HANG_TRANSMISSIONS_TIMEOUT = 10,
+ /* Timeout for the TX completion status of data frame */
+ QCA_WLAN_HANG_TX_COMPLETE_TIMEOUT = 11,
+ /* DXE failure for TX/RX, DXE resource unavailability */
+ QCA_WLAN_HANG_DXE_FAILURE = 12,
+ /* WMI pending commands exceed the maximum count */
+ QCA_WLAN_HANG_WMI_EXCEED_MAX_PENDING_CMDS = 13,
+ /* Timeout for peer STA connection accept command's response from the
+ * FW in AP mode. This command is triggered when a STA (peer) connects
+ * to AP (DUT).
+ */
+ QCA_WLAN_HANG_AP_STA_CONNECT_REQ_TIMEOUT = 14,
+ /* Timeout for the AP connection accept command's response from the FW
+ * in STA mode. This command is triggered when the STA (DUT) connects
+ * to an AP (peer).
+ */
+ QCA_WLAN_HANG_STA_AP_CONNECT_REQ_TIMEOUT = 15,
+ /* Timeout waiting for the response to the MAC HW mode change command
+ * sent to FW as a part of MAC mode switch among DBS (Dual Band
+ * Simultaneous), SCC (Single Channel Concurrency), and MCC (Multi
+ * Channel Concurrency) mode.
+ */
+ QCA_WLAN_HANG_MAC_HW_MODE_CHANGE_TIMEOUT = 16,
+ /* Timeout waiting for the response from FW to configure the MAC HW's
+ * mode. This operation is to configure the single/two MACs in either
+ * SCC/MCC/DBS mode.
+ */
+ QCA_WLAN_HANG_MAC_HW_MODE_CONFIG_TIMEOUT = 17,
+ /* Timeout waiting for response of VDEV start command from the FW */
+ QCA_WLAN_HANG_VDEV_START_RESPONSE_TIMED_OUT = 18,
+ /* Timeout waiting for response of VDEV restart command from the FW */
+ QCA_WLAN_HANG_VDEV_RESTART_RESPONSE_TIMED_OUT = 19,
+ /* Timeout waiting for response of VDEV stop command from the FW */
+ QCA_WLAN_HANG_VDEV_STOP_RESPONSE_TIMED_OUT = 20,
+ /* Timeout waiting for response of VDEV delete command from the FW */
+ QCA_WLAN_HANG_VDEV_DELETE_RESPONSE_TIMED_OUT = 21,
+ /* Timeout waiting for response of peer all delete request command to
+ * the FW on a specific VDEV.
+ */
+ QCA_WLAN_HANG_VDEV_PEER_DELETE_ALL_RESPONSE_TIMED_OUT = 22,
+ /* WMI sequence mismatch between WMI command and Tx completion */
+ QCA_WLAN_HANG_WMI_BUF_SEQUENCE_MISMATCH = 23,
+ /* Write to Device HAL register failed */
+ QCA_WLAN_HANG_REG_WRITE_FAILURE = 24,
+ /* No credit left to send the wow_wakeup_from_sleep to firmware */
+ QCA_WLAN_HANG_SUSPEND_NO_CREDIT = 25,
+ /* Bus failure */
+ QCA_WLAN_HANG_BUS_FAILURE = 26,
+ /* tasklet/credit latency found */
+ QCA_WLAN_HANG_TASKLET_CREDIT_LATENCY_DETECT = 27,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_hang - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_HANG.
+ */
+enum qca_wlan_vendor_attr_hang {
+ QCA_WLAN_VENDOR_ATTR_HANG_INVALID = 0,
+ /* Reason for the hang - u32 attribute with a value from enum
+ * qca_wlan_vendor_hang_reason.
+ */
+ QCA_WLAN_VENDOR_ATTR_HANG_REASON = 1,
+ /* The binary blob data associated with the hang reason specified by
+ * QCA_WLAN_VENDOR_ATTR_HANG_REASON. This binary data is expected to
+ * contain the required dump to analyze the reason for the hang.
+ * NLA_BINARY attribute, the max size is 1024 bytes.
+ */
+ QCA_WLAN_VENDOR_ATTR_HANG_REASON_DATA = 2,
+
+ QCA_WLAN_VENDOR_ATTR_HANG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_HANG_MAX =
+ QCA_WLAN_VENDOR_ATTR_HANG_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_flush_pending - Attributes for
+ * flushing pending traffic in firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_ADDR: Configure peer MAC address.
+ * @QCA_WLAN_VENDOR_ATTR_AC: Configure access category of the pending
+ * packets. It is u8 value with bit 0~3 represent AC_BE, AC_BK,
+ * AC_VI, AC_VO respectively. Set the corresponding bit to 1 to
+ * flush packets with access category.
+ */
+enum qca_wlan_vendor_attr_flush_pending {
+ QCA_WLAN_VENDOR_ATTR_FLUSH_PENDING_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_PEER_ADDR = 1,
+ QCA_WLAN_VENDOR_ATTR_AC = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_FLUSH_PENDING_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_FLUSH_PENDING_MAX =
+ QCA_WLAN_VENDOR_ATTR_FLUSH_PENDING_AFTER_LAST - 1,
+};
+
+/**
+ * qca_wlan_vendor_spectral_scan_cap_formula_id: Attribute values for
+ * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_FORMULA_ID in the vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO. This represents the
+ * Spectral bin scaling formula ID.
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_NO_SCALING: No scaling
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_AGC_GAIN_RSSI_CORR_BASED: AGC gain
+ * and RSSI threshold based formula.
+ */
+enum qca_wlan_vendor_spectral_scan_cap_formula_id {
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_NO_SCALING = 0,
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_AGC_GAIN_RSSI_CORR_BASED = 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_rropavail_info - Specifies whether Representative
+ * RF Operating Parameter (RROP) information is available, and if so, at which
+ * point in the application-driver interaction sequence it can be retrieved by
+ * the application from the driver. This point may vary by architecture and
+ * other factors. This is a u16 value.
+ */
+enum qca_wlan_vendor_attr_rropavail_info {
+ /* RROP information is unavailable. */
+ QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_UNAVAILABLE,
+ /* RROP information is available and the application can retrieve the
+ * information after receiving an QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS
+ * event from the driver.
+ */
+ QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_EXTERNAL_ACS_START,
+ /* RROP information is available only after a vendor specific scan
+ * (requested using QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN) has
+ * successfully completed. The application can retrieve the information
+ * after receiving the QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE event from
+ * the driver.
+ */
+ QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_VSCAN_END,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_rrop_info - Specifies vendor specific
+ * Representative RF Operating Parameter (RROP) information. It is sent for the
+ * vendor command QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO. This information is
+ * intended for use by external Auto Channel Selection applications. It provides
+ * guidance values for some RF parameters that are used by the system during
+ * operation. These values could vary by channel, band, radio, and so on.
+ */
+enum qca_wlan_vendor_attr_rrop_info {
+ QCA_WLAN_VENDOR_ATTR_RROP_INFO_INVALID = 0,
+
+ /* Representative Tx Power List (RTPL) which has an array of nested
+ * values as per attributes in enum qca_wlan_vendor_attr_rtplinst.
+ */
+ QCA_WLAN_VENDOR_ATTR_RROP_INFO_RTPL = 1,
+
+ QCA_WLAN_VENDOR_ATTR_RROP_INFO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_RROP_INFO_MAX =
+ QCA_WLAN_VENDOR_ATTR_RROP_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_rtplinst - Specifies attributes for individual list
+ * entry instances in the Representative Tx Power List (RTPL). It provides
+ * simplified power values intended for helping external Auto channel Selection
+ * applications compare potential Tx power performance between channels, other
+ * operating conditions remaining identical. These values are not necessarily
+ * the actual Tx power values that will be used by the system. They are also not
+ * necessarily the max or average values that will be used. Instead, they are
+ * relative, summarized keys for algorithmic use computed by the driver or
+ * underlying firmware considering a number of vendor specific factors.
+ */
+enum qca_wlan_vendor_attr_rtplinst {
+ QCA_WLAN_VENDOR_ATTR_RTPLINST_INVALID = 0,
+
+ /* Primary channel number (u8).
+ * Note: If both the driver and user space application support the
+ * 6 GHz band, this attribute is deprecated and
+ * QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY_FREQUENCY should be used. To
+ * maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY is still used if either the
+ * driver or user space application or both do not support the 6 GHz
+ * band.
+ */
+ QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY = 1,
+ /* Representative Tx power in dBm (s32) with emphasis on throughput. */
+ QCA_WLAN_VENDOR_ATTR_RTPLINST_TXPOWER_THROUGHPUT = 2,
+ /* Representative Tx power in dBm (s32) with emphasis on range. */
+ QCA_WLAN_VENDOR_ATTR_RTPLINST_TXPOWER_RANGE = 3,
+ /* Primary channel center frequency (u32) in MHz */
+ QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY_FREQUENCY = 4,
+
+ QCA_WLAN_VENDOR_ATTR_RTPLINST_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_RTPLINST_MAX =
+ QCA_WLAN_VENDOR_ATTR_RTPLINST_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_config_latency_level - Level for
+ * wlan latency module.
+ *
+ * There will be various of Wi-Fi functionality like scan/roaming/adaptive
+ * power saving which would causing data exchange out of service, this
+ * would be a big impact on latency. For latency sensitive applications over
+ * Wi-Fi are intolerant to such operations and thus would configure them
+ * to meet their respective needs. It is well understood by such applications
+ * that altering the default behavior would degrade the Wi-Fi functionality
+ * w.r.t the above pointed WLAN operations.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_NORMAL:
+ * Default WLAN operation level which throughput orientated.
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_MODERATE:
+ * Use moderate level to improve latency by limit scan duration.
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_LOW:
+ * Use low latency level to benifit application like concurrent
+ * downloading or video streaming via constraint scan/adaptive PS.
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_ULTRALOW:
+ * Use ultra low latency level to benefit for gaming/voice
+ * application via constraint scan/roaming/adaptive PS.
+ */
+enum qca_wlan_vendor_attr_config_latency_level {
+ QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_NORMAL = 1,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_MODERATE = 2,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_LOW = 3,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_ULTRALOW = 4,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_MAX =
+ QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_wlan_mac - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO.
+ */
+enum qca_wlan_vendor_attr_mac {
+ QCA_WLAN_VENDOR_ATTR_MAC_INVALID = 0,
+
+ /* MAC mode info list which has an array of nested values as
+ * per attributes in enum qca_wlan_vendor_attr_mac_mode_info.
+ */
+ QCA_WLAN_VENDOR_ATTR_MAC_INFO = 1,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_MAC_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_MAC_MAX =
+ QCA_WLAN_VENDOR_ATTR_MAC_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_mac_iface_info - Information of the connected
+ * Wi-Fi netdev interface on a respective MAC.
+ * Used by the attribute QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO.
+ */
+enum qca_wlan_vendor_attr_mac_iface_info {
+ QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_INVALID = 0,
+ /* Wi-Fi netdev's interface index (u32) */
+ QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_IFINDEX = 1,
+ /* Associated frequency in MHz of the connected Wi-Fi interface (u32) */
+ QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_FREQ = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_MAX =
+ QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_mac_info - Points to MAC the information.
+ * Used by the attribute QCA_WLAN_VENDOR_ATTR_MAC_INFO of the
+ * vendor command QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO.
+ */
+enum qca_wlan_vendor_attr_mac_info {
+ QCA_WLAN_VENDOR_ATTR_MAC_INFO_INVALID = 0,
+ /* Hardware MAC ID associated for the MAC (u32) */
+ QCA_WLAN_VENDOR_ATTR_MAC_INFO_MAC_ID = 1,
+ /* Band supported by the MAC at a given point.
+ * This is a u32 bitmask of BIT(NL80211_BAND_*) as described in %enum
+ * nl80211_band.
+ */
+ QCA_WLAN_VENDOR_ATTR_MAC_INFO_BAND = 2,
+ /* Refers to list of WLAN netdev interfaces associated with this MAC.
+ * Represented by enum qca_wlan_vendor_attr_mac_iface_info.
+ */
+ QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO = 3,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_MAC_INFO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_MAC_INFO_MAX =
+ QCA_WLAN_VENDOR_ATTR_MAC_INFO_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_get_logger_features - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET.
+ */
+enum qca_wlan_vendor_attr_get_logger_features {
+ QCA_WLAN_VENDOR_ATTR_LOGGER_INVALID = 0,
+ /* Unsigned 32-bit enum value of wifi_logger_supported_features */
+ QCA_WLAN_VENDOR_ATTR_LOGGER_SUPPORTED = 1,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_LOGGER_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LOGGER_MAX =
+ QCA_WLAN_VENDOR_ATTR_LOGGER_AFTER_LAST - 1,
+};
+
+/**
+ * enum wifi_logger_supported_features - Values for supported logger features
+ */
+enum wifi_logger_supported_features {
+ WIFI_LOGGER_MEMORY_DUMP_FEATURE = (1 << (0)),
+ WIFI_LOGGER_PER_PACKET_TX_RX_STATUS_FEATURE = (1 << (1)),
+ WIFI_LOGGER_CONNECT_EVENT_FEATURE = (1 << (2)),
+ WIFI_LOGGER_POWER_EVENT_FEATURE = (1 << (3)),
+ WIFI_LOGGER_WAKE_LOCK_FEATURE = (1 << (4)),
+ WIFI_LOGGER_VERBOSE_FEATURE = (1 << (5)),
+ WIFI_LOGGER_WATCHDOG_TIMER_FEATURE = (1 << (6)),
+ WIFI_LOGGER_DRIVER_DUMP_FEATURE = (1 << (7)),
+ WIFI_LOGGER_PACKET_FATE_FEATURE = (1 << (8)),
+};
+
+/**
+ * enum qca_wlan_tdls_caps_features_supported - Values for TDLS get
+ * capabilities features
+ */
+enum qca_wlan_tdls_caps_features_supported {
+ WIFI_TDLS_SUPPORT = (1 << (0)),
+ WIFI_TDLS_EXTERNAL_CONTROL_SUPPORT = (1 << (1)),
+ WIFI_TDLS_OFFCHANNEL_SUPPORT = (1 << (2))
+};
+
+/**
+ * enum qca_wlan_vendor_attr_tdls_get_capabilities - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_CAPABILITIES.
+ */
+enum qca_wlan_vendor_attr_tdls_get_capabilities {
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_INVALID = 0,
+ /* Indicates the max concurrent sessions */
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_MAX_CONC_SESSIONS,
+ /* Indicates the support for features */
+ /* Unsigned 32-bit bitmap qca_wlan_tdls_caps_features_supported
+ */
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_FEATURES_SUPPORTED,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_MAX =
+ QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_offloaded_packets_sending_control - Offload packets control
+ * command used as value for the attribute
+ * QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SENDING_CONTROL.
+ */
+enum qca_wlan_offloaded_packets_sending_control {
+ QCA_WLAN_OFFLOADED_PACKETS_SENDING_CONTROL_INVALID = 0,
+ QCA_WLAN_OFFLOADED_PACKETS_SENDING_START,
+ QCA_WLAN_OFFLOADED_PACKETS_SENDING_STOP
+};
+
+/**
+ * enum qca_wlan_vendor_attr_offloaded_packets - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_OFFLOADED_PACKETS.
+ */
+enum qca_wlan_vendor_attr_offloaded_packets {
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_INVALID = 0,
+ /* Takes valid value from the enum
+ * qca_wlan_offloaded_packets_sending_control
+ * Unsigned 32-bit value
+ */
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SENDING_CONTROL,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_REQUEST_ID,
+ /* array of u8 len: Max packet size */
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_IP_PACKET_DATA,
+ /* 6-byte MAC address used to represent source MAC address */
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SRC_MAC_ADDR,
+ /* 6-byte MAC address used to represent destination MAC address */
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_DST_MAC_ADDR,
+ /* Unsigned 32-bit value, in milli seconds */
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_PERIOD,
+ /* This optional unsigned 16-bit attribute is used for specifying
+ * ethernet protocol type. If not specified ethertype defaults to IPv4.
+ */
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_ETHER_PROTO_TYPE,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_MAX =
+ QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_rssi_monitoring_control - RSSI control commands used as values
+ * by the attribute QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CONTROL.
+ */
+enum qca_wlan_rssi_monitoring_control {
+ QCA_WLAN_RSSI_MONITORING_CONTROL_INVALID = 0,
+ QCA_WLAN_RSSI_MONITORING_START,
+ QCA_WLAN_RSSI_MONITORING_STOP,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_rssi_monitoring - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI.
+ */
+enum qca_wlan_vendor_attr_rssi_monitoring {
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_INVALID = 0,
+ /* Takes valid value from the enum
+ * qca_wlan_rssi_monitoring_control
+ * Unsigned 32-bit value enum qca_wlan_rssi_monitoring_control
+ */
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CONTROL,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_REQUEST_ID,
+ /* Signed 8-bit value in dBm */
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX_RSSI,
+ /* Signed 8-bit value in dBm */
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MIN_RSSI,
+ /* attributes to be used/received in callback */
+ /* 6-byte MAC address used to represent current BSSID MAC address */
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_BSSID,
+ /* Signed 8-bit value indicating the current RSSI */
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_RSSI,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX =
+ QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ndp_params - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_NDP.
+ */
+enum qca_wlan_vendor_attr_ndp_params {
+ QCA_WLAN_VENDOR_ATTR_NDP_PARAM_INVALID = 0,
+ /* Unsigned 32-bit value
+ * enum of sub commands values in qca_wlan_ndp_sub_cmd
+ */
+ QCA_WLAN_VENDOR_ATTR_NDP_SUBCMD,
+ /* Unsigned 16-bit value */
+ QCA_WLAN_VENDOR_ATTR_NDP_TRANSACTION_ID,
+ /* NL attributes for data used NDP SUB cmds */
+ /* Unsigned 32-bit value indicating a service info */
+ QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_INSTANCE_ID,
+ /* Unsigned 32-bit value; channel frequency in MHz */
+ QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL,
+ /* Interface Discovery MAC address. An array of 6 Unsigned int8 */
+ QCA_WLAN_VENDOR_ATTR_NDP_PEER_DISCOVERY_MAC_ADDR,
+ /* Interface name on which NDP is being created */
+ QCA_WLAN_VENDOR_ATTR_NDP_IFACE_STR,
+ /* Unsigned 32-bit value for security */
+ /* CONFIG_SECURITY is deprecated, use NCS_SK_TYPE/PMK/SCID instead */
+ QCA_WLAN_VENDOR_ATTR_NDP_CONFIG_SECURITY,
+ /* Unsigned 32-bit value for QoS */
+ QCA_WLAN_VENDOR_ATTR_NDP_CONFIG_QOS,
+ /* Array of u8: len = QCA_WLAN_VENDOR_ATTR_NAN_DP_APP_INFO_LEN */
+ QCA_WLAN_VENDOR_ATTR_NDP_APP_INFO,
+ /* Unsigned 32-bit value for NDP instance Id */
+ QCA_WLAN_VENDOR_ATTR_NDP_INSTANCE_ID,
+ /* Array of instance Ids */
+ QCA_WLAN_VENDOR_ATTR_NDP_INSTANCE_ID_ARRAY,
+ /* Unsigned 32-bit value for initiator/responder NDP response code
+ * accept/reject
+ */
+ QCA_WLAN_VENDOR_ATTR_NDP_RESPONSE_CODE,
+ /* NDI MAC address. An array of 6 Unsigned int8 */
+ QCA_WLAN_VENDOR_ATTR_NDP_NDI_MAC_ADDR,
+ /* Unsigned 32-bit value errors types returned by driver
+ * The wifi_nan.h in AOSP project platform/hardware/libhardware_legacy
+ * NanStatusType includes these values.
+ */
+ QCA_WLAN_VENDOR_ATTR_NDP_DRV_RESPONSE_STATUS_TYPE,
+ /* Unsigned 32-bit value error values returned by driver
+ * The nan_i.h in AOSP project platform/hardware/qcom/wlan
+ * NanInternalStatusType includes these values.
+ */
+ QCA_WLAN_VENDOR_ATTR_NDP_DRV_RETURN_VALUE,
+ /* Unsigned 32-bit value for Channel setup configuration
+ * The wifi_nan.h in AOSP project platform/hardware/libhardware_legacy
+ * NanDataPathChannelCfg includes these values.
+ */
+ QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_CONFIG,
+ /* Unsigned 32-bit value for Cipher Suite Shared Key Type */
+ QCA_WLAN_VENDOR_ATTR_NDP_CSID,
+ /* Array of u8: len = NAN_PMK_INFO_LEN 32 bytes */
+ QCA_WLAN_VENDOR_ATTR_NDP_PMK,
+ /* Security Context Identifier that contains the PMKID
+ * Array of u8: len = NAN_SCID_BUF_LEN 1024 bytes
+ */
+ QCA_WLAN_VENDOR_ATTR_NDP_SCID,
+ /* Array of u8: len = NAN_SECURITY_MAX_PASSPHRASE_LEN 63 bytes */
+ QCA_WLAN_VENDOR_ATTR_NDP_PASSPHRASE,
+ /* Array of u8: len = NAN_MAX_SERVICE_NAME_LEN 255 bytes */
+ QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_NAME,
+ /* Unsigned 32-bit bitmap indicating schedule update
+ * BIT_0: NSS Update
+ * BIT_1: Channel list update
+ */
+ QCA_WLAN_VENDOR_ATTR_NDP_SCHEDULE_UPDATE_REASON,
+ /* Unsigned 32-bit value for NSS */
+ QCA_WLAN_VENDOR_ATTR_NDP_NSS,
+ /* Unsigned 32-bit value for NUMBER NDP CHANNEL */
+ QCA_WLAN_VENDOR_ATTR_NDP_NUM_CHANNELS,
+ /* Unsigned 32-bit value for CHANNEL BANDWIDTH
+ * 0:20 MHz, 1:40 MHz, 2:80 MHz, 3:160 MHz
+ */
+ QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_WIDTH,
+ /* Array of channel/band width */
+ QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_INFO,
+ /* IPv6 address used by NDP (in network byte order), 16 bytes array.
+ * This attribute is used and optional for ndp request, ndp response,
+ * ndp indication, and ndp confirm.
+ */
+ QCA_WLAN_VENDOR_ATTR_NDP_IPV6_ADDR = 27,
+ /* Unsigned 16-bit value indicating transport port used by NDP.
+ * This attribute is used and optional for ndp response, ndp indication,
+ * and ndp confirm.
+ */
+ QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PORT = 28,
+ /* Unsigned 8-bit value indicating protocol used by NDP and assigned by
+ * the Internet Assigned Numbers Authority (IANA) as per:
+ * https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml
+ * This attribute is used and optional for ndp response, ndp indication,
+ * and ndp confirm.
+ */
+ QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PROTOCOL = 29,
+ /* Unsigned 8-bit value indicating if NDP remote peer supports NAN NDPE.
+ * 1:support 0:not support
+ */
+ QCA_WLAN_VENDOR_ATTR_PEER_NDPE_SUPPORT = 30,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_MAX =
+ QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST - 1,
+};
+
+enum qca_wlan_ndp_sub_cmd {
+ QCA_WLAN_VENDOR_ATTR_NDP_INVALID = 0,
+ /* Command to create a NAN data path interface */
+ QCA_WLAN_VENDOR_ATTR_NDP_INTERFACE_CREATE = 1,
+ /* Command to delete a NAN data path interface */
+ QCA_WLAN_VENDOR_ATTR_NDP_INTERFACE_DELETE = 2,
+ /* Command to initiate a NAN data path session */
+ QCA_WLAN_VENDOR_ATTR_NDP_INITIATOR_REQUEST = 3,
+ /* Command to notify if the NAN data path session was sent */
+ QCA_WLAN_VENDOR_ATTR_NDP_INITIATOR_RESPONSE = 4,
+ /* Command to respond to NAN data path session */
+ QCA_WLAN_VENDOR_ATTR_NDP_RESPONDER_REQUEST = 5,
+ /* Command to notify on the responder about the response */
+ QCA_WLAN_VENDOR_ATTR_NDP_RESPONDER_RESPONSE = 6,
+ /* Command to initiate a NAN data path end */
+ QCA_WLAN_VENDOR_ATTR_NDP_END_REQUEST = 7,
+ /* Command to notify the if end request was sent */
+ QCA_WLAN_VENDOR_ATTR_NDP_END_RESPONSE = 8,
+ /* Command to notify the peer about the end request */
+ QCA_WLAN_VENDOR_ATTR_NDP_REQUEST_IND = 9,
+ /* Command to confirm the NAN data path session is complete */
+ QCA_WLAN_VENDOR_ATTR_NDP_CONFIRM_IND = 10,
+ /* Command to indicate the peer about the end request being received */
+ QCA_WLAN_VENDOR_ATTR_NDP_END_IND = 11,
+ /* Command to indicate the peer of schedule update */
+ QCA_WLAN_VENDOR_ATTR_NDP_SCHEDULE_UPDATE_IND = 12
+};
+
+/**
+ * enum qca_wlan_vendor_attr_nd_offload - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_ND_OFFLOAD.
+ */
+enum qca_wlan_vendor_attr_nd_offload {
+ QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_INVALID = 0,
+ /* Flag to set Neighbour Discovery offload */
+ QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_FLAG,
+ /* Keep last */
+ QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_MAX =
+ QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_AFTER_LAST - 1,
+};
+
+/**
+ * enum packet_filter_sub_cmd - Packet filter sub commands
+ */
+enum packet_filter_sub_cmd {
+ /**
+ * Write packet filter program and/or data. The driver/firmware should
+ * disable APF before writing into local buffer and re-enable APF after
+ * writing is done.
+ */
+ QCA_WLAN_SET_PACKET_FILTER = 1,
+ /* Get packet filter feature capabilities from driver */
+ QCA_WLAN_GET_PACKET_FILTER = 2,
+ /**
+ * Write packet filter program and/or data. User space will send the
+ * %QCA_WLAN_DISABLE_PACKET_FILTER command before issuing this command
+ * and will send the %QCA_WLAN_ENABLE_PACKET_FILTER afterwards. The key
+ * difference from that %QCA_WLAN_SET_PACKET_FILTER is the control over
+ * enable/disable is given to user space with this command. Also,
+ * user space sends the length of program portion in the buffer within
+ * %QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROG_LENGTH.
+ */
+ QCA_WLAN_WRITE_PACKET_FILTER = 3,
+ /* Read packet filter program and/or data */
+ QCA_WLAN_READ_PACKET_FILTER = 4,
+ /* Enable APF feature */
+ QCA_WLAN_ENABLE_PACKET_FILTER = 5,
+ /* Disable APF feature */
+ QCA_WLAN_DISABLE_PACKET_FILTER = 6,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_packet_filter - BPF control commands used by
+ * vendor QCA_NL80211_VENDOR_SUBCMD_PACKET_FILTER.
+ */
+enum qca_wlan_vendor_attr_packet_filter {
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_INVALID = 0,
+ /* Unsigned 32-bit enum passed using packet_filter_sub_cmd */
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_SUB_CMD,
+ /* Unsigned 32-bit value indicating the packet filter version */
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_VERSION,
+ /* Unsigned 32-bit value indicating the packet filter id */
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_ID,
+ /**
+ * Unsigned 32-bit value indicating the packet filter size including
+ * program + data.
+ */
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_SIZE,
+ /* Unsigned 32-bit value indicating the packet filter current offset */
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_CURRENT_OFFSET,
+ /* Program and/or data in bytes */
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROGRAM,
+ /* Unsigned 32-bit value of the length of the program section in packet
+ * filter buffer.
+ */
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROG_LENGTH = 7,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_MAX =
+ QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_drv_info - WLAN driver info used by vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_GET_BUS_SIZE.
+ */
+enum qca_wlan_vendor_drv_info {
+ QCA_WLAN_VENDOR_ATTR_DRV_INFO_INVALID = 0,
+ /* Maximum Message size info between firmware & HOST
+ * Unsigned 32-bit value
+ */
+ QCA_WLAN_VENDOR_ATTR_DRV_INFO_BUS_SIZE,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_DRV_INFO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_DRV_INFO_MAX =
+ QCA_WLAN_VENDOR_ATTR_DRV_INFO_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_wake_stats - Wake lock stats used by vendor
+ * command QCA_NL80211_VENDOR_SUBCMD_GET_WAKE_REASON_STATS.
+ */
+enum qca_wlan_vendor_attr_wake_stats {
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_INVALID = 0,
+ /* Unsigned 32-bit value indicating the total count of wake event */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_TOTAL_CMD_EVENT_WAKE,
+ /* Array of individual wake count, each index representing wake reason
+ */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_CMD_EVENT_WAKE_CNT_PTR,
+ /* Unsigned 32-bit value representing wake count array */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_CMD_EVENT_WAKE_CNT_SZ,
+ /* Unsigned 32-bit total wake count value of driver/fw */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_TOTAL_DRIVER_FW_LOCAL_WAKE,
+ /* Array of wake stats of driver/fw */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_DRIVER_FW_LOCAL_WAKE_CNT_PTR,
+ /* Unsigned 32-bit total wake count value of driver/fw */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_DRIVER_FW_LOCAL_WAKE_CNT_SZ,
+ /* Unsigned 32-bit total wake count value of packets received */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_TOTAL_RX_DATA_WAKE,
+ /* Unsigned 32-bit wake count value unicast packets received */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_RX_UNICAST_CNT,
+ /* Unsigned 32-bit wake count value multicast packets received */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_RX_MULTICAST_CNT,
+ /* Unsigned 32-bit wake count value broadcast packets received */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_RX_BROADCAST_CNT,
+ /* Unsigned 32-bit wake count value of ICMP packets */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP_PKT,
+ /* Unsigned 32-bit wake count value of ICMP6 packets */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP6_PKT,
+ /* Unsigned 32-bit value ICMP6 router advertisement */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP6_RA,
+ /* Unsigned 32-bit value ICMP6 neighbor advertisement */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP6_NA,
+ /* Unsigned 32-bit value ICMP6 neighbor solicitation */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP6_NS,
+ /* Unsigned 32-bit wake count value of receive side ICMP4 multicast */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP4_RX_MULTICAST_CNT,
+ /* Unsigned 32-bit wake count value of receive side ICMP6 multicast */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP6_RX_MULTICAST_CNT,
+ /* Unsigned 32-bit wake count value of receive side multicast */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_OTHER_RX_MULTICAST_CNT,
+ /* Unsigned 32-bit wake count value of a given RSSI breach */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_RSSI_BREACH_CNT,
+ /* Unsigned 32-bit wake count value of low RSSI */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_LOW_RSSI_CNT,
+ /* Unsigned 32-bit value GSCAN count */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_GSCAN_CNT,
+ /* Unsigned 32-bit value PNO complete count */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_PNO_COMPLETE_CNT,
+ /* Unsigned 32-bit value PNO match count */
+ QCA_WLAN_VENDOR_ATTR_WAKE_STATS_PNO_MATCH_CNT,
+ /* keep last */
+ QCA_WLAN_VENDOR_GET_WAKE_STATS_AFTER_LAST,
+ QCA_WLAN_VENDOR_GET_WAKE_STATS_MAX =
+ QCA_WLAN_VENDOR_GET_WAKE_STATS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_thermal_level - Defines various thermal levels
+ * configured by userspace to the driver/firmware.
+ * The values can be encapsulated in QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL or
+ * QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_LEVEL attribute.
+ * The driver/firmware takes actions requested by userspace such as throttling
+ * wifi TX etc. in order to mitigate high temperature.
+ *
+ * @QCA_WLAN_VENDOR_THERMAL_LEVEL_NONE: Stop/clear all throttling actions.
+ * @QCA_WLAN_VENDOR_THERMAL_LEVEL_LIGHT: Throttle TX lightly.
+ * @QCA_WLAN_VENDOR_THERMAL_LEVEL_MODERATE: Throttle TX moderately.
+ * @QCA_WLAN_VENDOR_THERMAL_LEVEL_SEVERE: Throttle TX severely.
+ * @QCA_WLAN_VENDOR_THERMAL_LEVEL_CRITICAL: Critical thermal level reached.
+ * @QCA_WLAN_VENDOR_THERMAL_LEVEL_EMERGENCY: Emergency thermal level reached.
+ */
+enum qca_wlan_vendor_thermal_level {
+ QCA_WLAN_VENDOR_THERMAL_LEVEL_NONE = 0,
+ QCA_WLAN_VENDOR_THERMAL_LEVEL_LIGHT = 1,
+ QCA_WLAN_VENDOR_THERMAL_LEVEL_MODERATE = 2,
+ QCA_WLAN_VENDOR_THERMAL_LEVEL_SEVERE = 3,
+ QCA_WLAN_VENDOR_THERMAL_LEVEL_CRITICAL = 4,
+ QCA_WLAN_VENDOR_THERMAL_LEVEL_EMERGENCY = 5,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_thermal_cmd - Vendor subcmd attributes to set
+ * cmd value. Used for NL attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD sub command.
+ */
+enum qca_wlan_vendor_attr_thermal_cmd {
+ QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_INVALID = 0,
+ /* The value of command, driver will implement different operations
+ * according to this value. It uses values defined in
+ * enum qca_wlan_vendor_attr_thermal_cmd_type.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_VALUE = 1,
+ /* Userspace uses this attribute to configure thermal level to the
+ * driver/firmware, or get thermal level from the driver/firmware.
+ * Used in request or response, u32 attribute,
+ * possible values are defined in enum qca_wlan_vendor_thermal_level.
+ */
+ QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL = 2,
+ /* Userspace uses this attribute to configure the time in which the
+ * driver/firmware should complete applying settings it received from
+ * userspace with QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SET_LEVEL
+ * command type. Used in request, u32 attribute, value is in
+ * milliseconds. A value of zero indicates to apply the settings
+ * immediately. The driver/firmware can delay applying the configured
+ * thermal settings within the time specified in this attribute if
+ * there is any critical ongoing operation.
+ */
+ QCA_WLAN_VENDOR_ATTR_THERMAL_COMPLETION_WINDOW = 3,
+ /* Nested attribute, the driver/firmware uses this attribute to report
+ * thermal statistics of different thermal levels to userspace when
+ * requested using the
+ * QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_THERMAL_STATS command
+ * type. This attribute contains a nested array of records of thermal
+ * statistics of multiple levels. The attributes used inside this nested
+ * attribute are defined in enum qca_wlan_vendor_attr_thermal_stats.
+ */
+ QCA_WLAN_VENDOR_ATTR_THERMAL_STATS = 4,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_MAX =
+ QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_AFTER_LAST - 1
+};
+
+/**
+ * qca_wlan_vendor_attr_thermal_cmd_type: Attribute values for
+ * QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_VALUE to the vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD. This represents the
+ * thermal command types sent to driver.
+ * @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_PARAMS: Request to
+ * get thermal shutdown configuration parameters for display. Parameters
+ * responded from driver are defined in
+ * enum qca_wlan_vendor_attr_get_thermal_params_rsp.
+ * @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_TEMPERATURE: Request to
+ * get temperature. Host should respond with a temperature data. It is defined
+ * in enum qca_wlan_vendor_attr_thermal_get_temperature.
+ * @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SUSPEND: Request to execute thermal
+ * suspend action.
+ * @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_RESUME: Request to execute thermal
+ * resume action.
+ * @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SET_LEVEL: Configure thermal level to
+ * the driver/firmware.
+ * @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_LEVEL: Request to get the current
+ * thermal level from the driver/firmware. The driver should respond with a
+ * thermal level defined in enum qca_wlan_vendor_thermal_level.
+ * @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_THERMAL_STATS: Request to get the
+ * current thermal statistics from the driver/firmware. The driver should
+ * respond with statistics of all thermal levels encapsulated in the attribute
+ * QCA_WLAN_VENDOR_ATTR_THERMAL_STATS.
+ * @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_CLEAR_THERMAL_STATS: Request to clear
+ * the current thermal statistics for all thermal levels maintained in the
+ * driver/firmware and start counting from zero again.
+ */
+enum qca_wlan_vendor_attr_thermal_cmd_type {
+ QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_PARAMS,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_TEMPERATURE,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SUSPEND,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_RESUME,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SET_LEVEL,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_LEVEL,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_THERMAL_STATS,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_CLEAR_THERMAL_STATS,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_thermal_get_temperature - vendor subcmd attributes
+ * to get chip temperature by user.
+ * enum values are used for NL attributes for data used by
+ * QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_TEMPERATURE command for data used
+ * by QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD sub command.
+ */
+enum qca_wlan_vendor_attr_thermal_get_temperature {
+ QCA_WLAN_VENDOR_ATTR_THERMAL_GET_TEMPERATURE_INVALID = 0,
+ /* Temperature value (degree Celsius) from driver.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_THERMAL_GET_TEMPERATURE_DATA,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_THERMAL_GET_TEMPERATURE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_GET_TEMPERATURE_MAX =
+ QCA_WLAN_VENDOR_ATTR_THERMAL_GET_TEMPERATURE_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_get_thermal_params_rsp - vendor subcmd attributes
+ * to get configuration parameters of thermal shutdown feature. Enum values are
+ * used by QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_PARAMS command for data
+ * used by QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD sub command.
+ */
+enum qca_wlan_vendor_attr_get_thermal_params_rsp {
+ QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_INVALID = 0,
+ /* Indicate if the thermal shutdown feature is enabled.
+ * NLA_FLAG attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_SHUTDOWN_EN,
+ /* Indicate if the auto mode is enabled.
+ * Enable: Driver triggers the suspend/resume action.
+ * Disable: User space triggers the suspend/resume action.
+ * NLA_FLAG attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_SHUTDOWN_AUTO_EN,
+ /* Thermal resume threshold (degree Celsius). Issue the resume command
+ * if the temperature value is lower than this threshold.
+ * u16 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_RESUME_THRESH,
+ /* Thermal warning threshold (degree Celsius). FW reports temperature
+ * to driver if it's higher than this threshold.
+ * u16 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_WARNING_THRESH,
+ /* Thermal suspend threshold (degree Celsius). Issue the suspend command
+ * if the temperature value is higher than this threshold.
+ * u16 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_SUSPEND_THRESH,
+ /* FW reports temperature data periodically at this interval (ms).
+ * u16 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_SAMPLE_RATE,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_MAX =
+ QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_thermal_event - vendor subcmd attributes to
+ * report thermal events from driver to user space.
+ * enum values are used for NL attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_THERMAL_EVENT sub command.
+ */
+enum qca_wlan_vendor_attr_thermal_event {
+ QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_INVALID = 0,
+ /* Temperature value (degree Celsius) from driver.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_TEMPERATURE,
+ /* Indication of resume completion from power save mode.
+ * NLA_FLAG attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_RESUME_COMPLETE,
+ /* Thermal level from the driver.
+ * u32 attribute. Possible values are defined in
+ * enum qca_wlan_vendor_thermal_level.
+ */
+ QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_LEVEL = 3,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_MAX =
+ QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_thermal_stats - vendor subcmd attributes
+ * to get thermal status from the driver/firmware.
+ * enum values are used for NL attributes encapsulated inside the
+ * QCA_WLAN_VENDOR_ATTR_THERMAL_STATS nested attribute.
+ *
+ * QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_MIN_TEMPERATURE: Minimum temperature
+ * of a thermal level in Celsius. u32 size.
+ * QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_MAX_TEMPERATURE: Maximum temperature
+ * of a thermal level in Celsius. u32 size.
+ * QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_DWELL_TIME: The total time spent on each
+ * thermal level in milliseconds. u32 size.
+ * QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_TEMP_LEVEL_COUNTER: Indicates the number
+ * of times the temperature crossed into the temperature range defined by the
+ * thermal level from both higher and lower directions. u32 size.
+ */
+enum qca_wlan_vendor_attr_thermal_stats {
+ QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_MIN_TEMPERATURE,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_MAX_TEMPERATURE,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_DWELL_TIME,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_TEMP_LEVEL_COUNTER,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_MAX =
+ QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_AFTER_LAST - 1,
+};
+
+/**
+ * enum he_fragmentation_val - HE fragmentation support values
+ * Indicates level of dynamic fragmentation that is supported by
+ * a STA as a recipient.
+ * HE fragmentation values are defined in IEEE P802.11ax/D2.0, 9.4.2.237.2
+ * (HE MAC Capabilities Information field) and are used in HE Capabilities
+ * element to advertise the support. These values are validated in the driver
+ * to check the device capability and advertised in the HE Capabilities
+ * element. These values are used to configure testbed device to allow the
+ * advertised hardware capabilities to be downgraded for testing purposes.
+ *
+ * @HE_FRAG_DISABLE: no support for dynamic fragmentation
+ * @HE_FRAG_LEVEL1: support for dynamic fragments that are
+ * contained within an MPDU or S-MPDU, no support for dynamic fragments
+ * within an A-MPDU that is not an S-MPDU.
+ * @HE_FRAG_LEVEL2: support for dynamic fragments that are
+ * contained within an MPDU or S-MPDU and support for up to one dynamic
+ * fragment for each MSDU, each A-MSDU if supported by the recipient, and
+ * each MMPDU within an A-MPDU or multi-TID A-MPDU that is not an
+ * MPDU or S-MPDU.
+ * @HE_FRAG_LEVEL3: support for dynamic fragments that are
+ * contained within an MPDU or S-MPDU and support for multiple dynamic
+ * fragments for each MSDU and for each A-MSDU if supported by the
+ * recipient within an A-MPDU or multi-TID AMPDU and up to one dynamic
+ * fragment for each MMPDU in a multi-TID A-MPDU that is not an S-MPDU.
+ */
+enum he_fragmentation_val {
+ HE_FRAG_DISABLE,
+ HE_FRAG_LEVEL1,
+ HE_FRAG_LEVEL2,
+ HE_FRAG_LEVEL3,
+};
+
+/**
+ * enum he_mcs_config - HE MCS support configuration
+ *
+ * Configures the HE Tx/Rx MCS map in HE capability IE for given bandwidth.
+ * These values are used in driver to configure the HE MCS map to advertise
+ * Tx/Rx MCS map in HE capability and these values are applied for all the
+ * streams supported by the device. To configure MCS for different bandwidths,
+ * vendor command needs to be sent using this attribute with appropriate value.
+ * For example, to configure HE_80_MCS_0_7, send vendor command using HE MCS
+ * attribute with HE_80_MCS0_7. And to configure HE MCS for HE_160_MCS0_11
+ * send this command using HE MCS config attribute with value HE_160_MCS0_11.
+ * These values are used to configure testbed device to allow the advertised
+ * hardware capabilities to be downgraded for testing purposes. The enum values
+ * are defined such that BIT[1:0] indicates the MCS map value. Values 3,7 and
+ * 11 are not used as BIT[1:0] value is 3 which is used to disable MCS map.
+ * These values are validated in the driver before setting the MCS map and
+ * driver returns error if the input is other than these enum values.
+ *
+ * @HE_80_MCS0_7: support for HE 80/40/20 MHz MCS 0 to 7
+ * @HE_80_MCS0_9: support for HE 80/40/20 MHz MCS 0 to 9
+ * @HE_80_MCS0_11: support for HE 80/40/20 MHz MCS 0 to 11
+ * @HE_160_MCS0_7: support for HE 160 MHz MCS 0 to 7
+ * @HE_160_MCS0_9: support for HE 160 MHz MCS 0 to 9
+ * @HE_160_MCS0_11: support for HE 160 MHz MCS 0 to 11
+ * @HE_80P80_MCS0_7: support for HE 80p80 MHz MCS 0 to 7
+ * @HE_80P80_MCS0_9: support for HE 80p80 MHz MCS 0 to 9
+ * @HE_80P80_MCS0_11: support for HE 80p80 MHz MCS 0 to 11
+ */
+enum he_mcs_config {
+ HE_80_MCS0_7 = 0,
+ HE_80_MCS0_9 = 1,
+ HE_80_MCS0_11 = 2,
+ HE_160_MCS0_7 = 4,
+ HE_160_MCS0_9 = 5,
+ HE_160_MCS0_11 = 6,
+ HE_80P80_MCS0_7 = 8,
+ HE_80P80_MCS0_9 = 9,
+ HE_80P80_MCS0_11 = 10,
+};
+
+/**
+ * enum qca_wlan_ba_session_config - BA session configuration
+ *
+ * Indicates the configuration values for BA session configuration attribute.
+ *
+ * @QCA_WLAN_ADD_BA: Establish a new BA session with given configuration.
+ * @QCA_WLAN_DELETE_BA: Delete the existing BA session for given TID.
+ */
+enum qca_wlan_ba_session_config {
+ QCA_WLAN_ADD_BA = 1,
+ QCA_WLAN_DELETE_BA = 2,
+};
+
+/**
+ * enum qca_wlan_ac_type - Access category type
+ *
+ * Indicates the access category type value.
+ *
+ * @QCA_WLAN_AC_BE: BE access category
+ * @QCA_WLAN_AC_BK: BK access category
+ * @QCA_WLAN_AC_VI: VI access category
+ * @QCA_WLAN_AC_VO: VO access category
+ * @QCA_WLAN_AC_ALL: All ACs
+ */
+enum qca_wlan_ac_type {
+ QCA_WLAN_AC_BE = 0,
+ QCA_WLAN_AC_BK = 1,
+ QCA_WLAN_AC_VI = 2,
+ QCA_WLAN_AC_VO = 3,
+ QCA_WLAN_AC_ALL = 4,
+};
+
+/**
+ * enum qca_wlan_he_ltf_cfg - HE LTF configuration
+ *
+ * Indicates the HE LTF configuration value.
+ *
+ * @QCA_WLAN_HE_LTF_AUTO: HE-LTF is automatically set to the mandatory HE-LTF,
+ * based on the GI setting
+ * @QCA_WLAN_HE_LTF_1X: 1X HE LTF is 3.2us LTF
+ * @QCA_WLAN_HE_LTF_2X: 2X HE LTF is 6.4us LTF
+ * @QCA_WLAN_HE_LTF_4X: 4X HE LTF is 12.8us LTF
+ */
+enum qca_wlan_he_ltf_cfg {
+ QCA_WLAN_HE_LTF_AUTO = 0,
+ QCA_WLAN_HE_LTF_1X = 1,
+ QCA_WLAN_HE_LTF_2X = 2,
+ QCA_WLAN_HE_LTF_4X = 3,
+};
+
+/**
+ * enum qca_wlan_he_mac_padding_dur - HE trigger frame MAC padding duration
+ *
+ * Indicates the HE trigger frame MAC padding duration value.
+ *
+ * @QCA_WLAN_HE_NO_ADDITIONAL_PROCESS_TIME: no additional time required to
+ * process the trigger frame.
+ * @QCA_WLAN_HE_8US_OF_PROCESS_TIME: indicates the 8us of processing time for
+ * trigger frame.
+ * @QCA_WLAN_HE_16US_OF_PROCESS_TIME: indicates the 16us of processing time for
+ * trigger frame.
+ */
+enum qca_wlan_he_mac_padding_dur {
+ QCA_WLAN_HE_NO_ADDITIONAL_PROCESS_TIME = 0,
+ QCA_WLAN_HE_8US_OF_PROCESS_TIME = 1,
+ QCA_WLAN_HE_16US_OF_PROCESS_TIME = 2,
+};
+
+/**
+ * enum qca_wlan_he_om_ctrl_ch_bw - HE OM control field BW configuration
+ *
+ * Indicates the HE Operating mode control channel width setting value.
+ *
+ * @QCA_WLAN_HE_OM_CTRL_BW_20M: Primary 20 MHz
+ * @QCA_WLAN_HE_OM_CTRL_BW_40M: Primary 40 MHz
+ * @QCA_WLAN_HE_OM_CTRL_BW_80M: Primary 80 MHz
+ * @QCA_WLAN_HE_OM_CTRL_BW_160M: 160 MHz and 80+80 MHz
+ */
+enum qca_wlan_he_om_ctrl_ch_bw {
+ QCA_WLAN_HE_OM_CTRL_BW_20M = 0,
+ QCA_WLAN_HE_OM_CTRL_BW_40M = 1,
+ QCA_WLAN_HE_OM_CTRL_BW_80M = 2,
+ QCA_WLAN_HE_OM_CTRL_BW_160M = 3,
+};
+
+/**
+ * enum qca_wlan_keep_alive_data_type - Keep alive data type configuration
+ *
+ * Indicates the frame types to use for keep alive data.
+ *
+ * @QCA_WLAN_KEEP_ALIVE_DEFAULT: Driver default type used for keep alive.
+ * @QCA_WLAN_KEEP_ALIVE_DATA: Data frame type for keep alive.
+ * @QCA_WLAN_KEEP_ALIVE_MGMT: Management frame type for keep alive.
+ */
+enum qca_wlan_keep_alive_data_type {
+ QCA_WLAN_KEEP_ALIVE_DEFAULT = 0,
+ QCA_WLAN_KEEP_ALIVE_DATA = 1,
+ QCA_WLAN_KEEP_ALIVE_MGMT = 2,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_he_omi_tx: Represents attributes for
+ * HE operating mode control transmit request. These attributes are
+ * sent as part of QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX and
+ * QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_HE_OMI_RX_NSS: Mandatory 8-bit unsigned value
+ * indicates the maximum number of spatial streams, NSS, that the STA
+ * supports in reception for PPDU bandwidths less than or equal to 80 MHz
+ * and is set to NSS - 1.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_HE_OMI_CH_BW: Mandatory 8-bit unsigned value
+ * indicates the operating channel width supported by the STA for both
+ * reception and transmission. Uses enum qca_wlan_he_om_ctrl_ch_bw values.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DISABLE: Mandatory 8-bit unsigned value
+ * indicates the all trigger based UL MU operations by the STA.
+ * 0 - UL MU operations are enabled by the STA.
+ * 1 - All triggered UL MU transmissions are suspended by the STA.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_HE_OMI_TX_NSTS: Mandatory 8-bit unsigned value
+ * indicates the maximum number of space-time streams, NSTS, that
+ * the STA supports in transmission and is set to NSTS - 1.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DATA_DISABLE: 8-bit unsigned value
+ * combined with the UL MU Disable subfield and the recipient's setting
+ * of the OM Control UL MU Data Disable RX Support subfield in the HE MAC
+ * capabilities to determine which HE TB PPDUs are possible by the
+ * STA to transmit.
+ * 0 - UL MU data operations are enabled by the STA.
+ * 1 - Determine which HE TB PPDU types are allowed by the STA if UL MU disable
+ * bit is not set, else UL MU Tx is suspended.
+ *
+ */
+enum qca_wlan_vendor_attr_he_omi_tx {
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_RX_NSS = 1,
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_CH_BW = 2,
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DISABLE = 3,
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_TX_NSTS = 4,
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DATA_DISABLE = 5,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_MAX =
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST - 1,
+};
+
+ /**
+ * enum qca_wlan_vendor_phy_mode - Different PHY modes
+ * These values are used with %QCA_WLAN_VENDOR_ATTR_CONFIG_PHY_MODE.
+ *
+ * @QCA_WLAN_VENDOR_PHY_MODE_AUTO: autoselect
+ * @QCA_WLAN_VENDOR_PHY_MODE_2G_AUTO: 2.4 GHz 802.11b/g/n/ax autoselect
+ * @QCA_WLAN_VENDOR_PHY_MODE_5G_AUTO: 5 GHz 802.11a/n/ac/ax autoselect
+ * @QCA_WLAN_VENDOR_PHY_MODE_11A: 5 GHz, OFDM
+ * @QCA_WLAN_VENDOR_PHY_MODE_11B: 2.4 GHz, CCK
+ * @QCA_WLAN_VENDOR_PHY_MODE_11G: 2.4 GHz, OFDM
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AGN: Support 802.11n in both 2.4 GHz and 5 GHz
+ * @QCA_WLAN_VENDOR_PHY_MODE_11NG_HT20: 2.4 GHz, HT20
+ * @QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40PLUS: 2.4 GHz, HT40 (ext ch +1)
+ * @QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40MINUS: 2.4 GHz, HT40 (ext ch -1)
+ * @QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40: 2.4 GHz, Auto HT40
+ * @QCA_WLAN_VENDOR_PHY_MODE_11NA_HT20: 5 GHz, HT20
+ * @QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40PLUS: 5 GHz, HT40 (ext ch +1)
+ * @QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40MINUS: 5 GHz, HT40 (ext ch -1)
+ * @QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40: 5 GHz, Auto HT40
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT20: 5 GHz, VHT20
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40PLUS: 5 GHz, VHT40 (Ext ch +1)
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40MINUS: 5 GHz VHT40 (Ext ch -1)
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40: 5 GHz, VHT40
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT80: 5 GHz, VHT80
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT80P80: 5 GHz, VHT80+80
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT160: 5 GHz, VHT160
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE20: HE20
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40: HE40
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40PLUS: HE40 (ext ch +1)
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40MINUS: HE40 (ext ch -1)
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE80: HE80
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE80P80: HE 80P80
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE160: HE160
+ */
+enum qca_wlan_vendor_phy_mode {
+ QCA_WLAN_VENDOR_PHY_MODE_AUTO = 0,
+ QCA_WLAN_VENDOR_PHY_MODE_2G_AUTO = 1,
+ QCA_WLAN_VENDOR_PHY_MODE_5G_AUTO = 2,
+ QCA_WLAN_VENDOR_PHY_MODE_11A = 3,
+ QCA_WLAN_VENDOR_PHY_MODE_11B = 4,
+ QCA_WLAN_VENDOR_PHY_MODE_11G = 5,
+ QCA_WLAN_VENDOR_PHY_MODE_11AGN = 6,
+ QCA_WLAN_VENDOR_PHY_MODE_11NG_HT20 = 7,
+ QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40PLUS = 8,
+ QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40MINUS = 9,
+ QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40 = 10,
+ QCA_WLAN_VENDOR_PHY_MODE_11NA_HT20 = 11,
+ QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40PLUS = 12,
+ QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40MINUS = 13,
+ QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40 = 14,
+ QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT20 = 15,
+ QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40PLUS = 16,
+ QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40MINUS = 17,
+ QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40 = 18,
+ QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT80 = 19,
+ QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT80P80 = 20,
+ QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT160 = 21,
+ QCA_WLAN_VENDOR_PHY_MODE_11AX_HE20 = 22,
+ QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40 = 23,
+ QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40PLUS = 24,
+ QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40MINUS = 25,
+ QCA_WLAN_VENDOR_PHY_MODE_11AX_HE80 = 26,
+ QCA_WLAN_VENDOR_PHY_MODE_11AX_HE80P80 = 27,
+ QCA_WLAN_VENDOR_PHY_MODE_11AX_HE160 = 28,
+};
+
+/* Attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION
+ */
+enum qca_wlan_vendor_attr_wifi_test_config {
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_INVALID = 0,
+ /* 8-bit unsigned value to configure the driver to enable/disable
+ * WMM feature. This attribute is used to configure testbed device.
+ * 1-enable, 0-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_WMM_ENABLE = 1,
+
+ /* 8-bit unsigned value to configure the driver to accept/reject
+ * the addba request from peer. This attribute is used to configure
+ * the testbed device.
+ * 1-accept addba, 0-reject addba
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ACCEPT_ADDBA_REQ = 2,
+
+ /* 8-bit unsigned value to configure the driver to send or not to
+ * send the addba request to peer.
+ * This attribute is used to configure the testbed device.
+ * 1-send addba, 0-do not send addba
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_SEND_ADDBA_REQ = 3,
+
+ /* 8-bit unsigned value to indicate the HE fragmentation support.
+ * Uses enum he_fragmentation_val values.
+ * This attribute is used to configure the testbed device to
+ * allow the advertised hardware capabilities to be downgraded
+ * for testing purposes.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_FRAGMENTATION = 4,
+
+ /* 8-bit unsigned value to indicate the HE MCS support.
+ * Uses enum he_mcs_config values.
+ * This attribute is used to configure the testbed device to
+ * allow the advertised hardware capabilities to be downgraded
+ * for testing purposes.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MCS = 5,
+
+ /* 8-bit unsigned value to configure the driver to allow or not to
+ * allow the connection with WEP/TKIP in HT/VHT/HE modes.
+ * This attribute is used to configure the testbed device.
+ * 1-allow WEP/TKIP in HT/VHT/HE, 0-do not allow WEP/TKIP.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_WEP_TKIP_IN_HE = 6,
+
+ /* 8-bit unsigned value to configure the driver to add a
+ * new BA session or delete the existing BA session for
+ * given TID. ADDBA command uses the buffer size and TID
+ * configuration if user specifies the values else default
+ * value for buffer size is used for all TIDs if the TID
+ * also not specified. For DEL_BA command TID value is
+ * required to process the command.
+ * Uses enum qca_wlan_ba_session_config values.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ADD_DEL_BA_SESSION = 7,
+
+ /* 16-bit unsigned value to configure the buffer size in addba
+ * request and response frames.
+ * This attribute is used to configure the testbed device.
+ * The range of the value is 0 to 256.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ADDBA_BUFF_SIZE = 8,
+
+ /* 8-bit unsigned value to configure the buffer size in addba
+ * request and response frames.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_BA_TID = 9,
+
+ /* 8-bit unsigned value to configure the no ack policy.
+ * To configure no ack policy, access category value is
+ * required to process the command.
+ * This attribute is used to configure the testbed device.
+ * 1 - enable no ack, 0 - disable no ack.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ENABLE_NO_ACK = 10,
+
+ /* 8-bit unsigned value to configure the AC for no ack policy
+ * This attribute is used to configure the testbed device.
+ * Uses the enum qca_wlan_ac_type values.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_NO_ACK_AC = 11,
+
+ /* 8-bit unsigned value to configure the HE LTF
+ * This attribute is used to configure the testbed device.
+ * Uses the enum qca_wlan_he_ltf_cfg values.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_LTF = 12,
+
+ /* 8-bit unsigned value to configure the tx beamformee.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ENABLE_TX_BEAMFORMEE = 13,
+
+ /* 8-bit unsigned value to configure the tx beamformee number
+ * of space-time streams.
+ * This attribute is used to configure the testbed device.
+ * The range of the value is 0 to 8.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TX_BEAMFORMEE_NSTS = 14,
+
+ /* 8-bit unsigned value to configure the MU EDCA params for given AC
+ * This attribute is used to configure the testbed device.
+ * Uses the enum qca_wlan_ac_type values.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_AC = 15,
+
+ /* 8-bit unsigned value to configure the MU EDCA AIFSN for given AC
+ * To configure MU EDCA AIFSN value, MU EDCA access category value
+ * is required to process the command.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_AIFSN = 16,
+
+ /* 8-bit unsigned value to configure the MU EDCA ECW min value for
+ * given AC.
+ * To configure MU EDCA ECW min value, MU EDCA access category value
+ * is required to process the command.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_ECWMIN = 17,
+
+ /* 8-bit unsigned value to configure the MU EDCA ECW max value for
+ * given AC.
+ * To configure MU EDCA ECW max value, MU EDCA access category value
+ * is required to process the command.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_ECWMAX = 18,
+
+ /* 8-bit unsigned value to configure the MU EDCA timer for given AC
+ * To configure MU EDCA timer value, MU EDCA access category value
+ * is required to process the command.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_TIMER = 19,
+
+ /* 8-bit unsigned value to configure the HE trigger frame MAC padding
+ * duration.
+ * This attribute is used to configure the testbed device.
+ * Uses the enum qca_wlan_he_mac_padding_dur values.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MAC_PADDING_DUR = 20,
+
+ /* 8-bit unsigned value to override the MU EDCA params to defaults
+ * regardless of the AP beacon MU EDCA params. If it is enabled use
+ * the default values else use the MU EDCA params from AP beacon.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OVERRIDE_MU_EDCA = 21,
+
+ /* 8-bit unsigned value to configure the support for receiving
+ * an MPDU that contains an operating mode control subfield.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_SUPP = 22,
+
+ /* Nested attribute values required to setup the TWT session.
+ * enum qca_wlan_vendor_attr_twt_setup provides the necessary
+ * information to set up the session. It contains broadcast flags,
+ * set_up flags, trigger value, flow type, flow ID, wake interval
+ * exponent, protection, target wake time, wake duration, wake interval
+ * mantissa. These nested attributes are used to setup a host triggered
+ * TWT session.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP = 23,
+
+ /* This nested attribute is used to terminate the current TWT session.
+ * It does not currently carry any attributes.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_TERMINATE = 24,
+
+ /* This nested attribute is used to suspend the current TWT session.
+ * It does not currently carry any attributes.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SUSPEND = 25,
+
+ /* Nested attribute values to indicate the request for resume.
+ * This attribute is used to resume the TWT session.
+ * enum qca_wlan_vendor_attr_twt_resume provides the necessary
+ * parameters required to resume the TWT session.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME = 26,
+
+ /* 8-bit unsigned value to set the HE operating mode control
+ * (OM CTRL) Channel Width subfield.
+ * The Channel Width subfield indicates the operating channel width
+ * supported by the STA for both reception and transmission.
+ * Uses the enum qca_wlan_he_om_ctrl_ch_bw values.
+ * This setting is cleared with the
+ * QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG
+ * flag attribute to reset defaults.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_BW = 27,
+
+ /* 8-bit unsigned value to configure the number of spatial
+ * streams in HE operating mode control field.
+ * This setting is cleared with the
+ * QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG
+ * flag attribute to reset defaults.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_NSS = 28,
+
+ /* Flag attribute to configure the UL MU disable bit in
+ * HE operating mode control field.
+ * This setting is cleared with the
+ * QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG
+ * flag attribute to reset defaults.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_UL_MU_DISABLE = 29,
+
+ /* Flag attribute to clear the previously set HE operating mode
+ * control field configuration.
+ * This attribute is used to configure the testbed device to reset
+ * defaults to clear any previously set HE operating mode control
+ * field configuration.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG = 30,
+
+ /* 8-bit unsigned value to configure HE single user PPDU
+ * transmission. By default this setting is disabled and it
+ * is disabled in the reset defaults of the device configuration.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TX_SUPPDU = 31,
+
+ /* 8-bit unsigned value to configure action frame transmission
+ * in HE trigger based PPDU transmission.
+ * By default this setting is disabled and it is disabled in
+ * the reset defaults of the device configuration.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_ACTION_TX_TB_PPDU = 32,
+
+ /* Nested attribute to indicate HE operating mode control field
+ * transmission. It contains operating mode control field Nss,
+ * channel bandwidth, Tx Nsts and UL MU disable attributes.
+ * These nested attributes are used to send HE operating mode control
+ * with configured values.
+ * Uses the enum qca_wlan_vendor_attr_he_omi_tx attributes.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX = 33,
+
+ /* 8-bit unsigned value to configure +HTC_HE support to indicate the
+ * support for the reception of a frame that carries an HE variant
+ * HT Control field.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_HTC_HE_SUPP = 34,
+
+ /* 8-bit unsigned value to configure VHT support in 2.4G band.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ENABLE_2G_VHT = 35,
+
+ /* 8-bit unsigned value to configure HE testbed defaults.
+ * This attribute is used to configure the testbed device.
+ * 1-set the device HE capabilities to testbed defaults.
+ * 0-reset the device HE capabilities to supported config.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_SET_HE_TESTBED_DEFAULTS = 36,
+
+ /* 8-bit unsigned value to configure TWT request support.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TWT_REQ_SUPPORT = 37,
+
+ /* 8-bit unsigned value to configure protection for Management
+ * frames when PMF is enabled for the association.
+ * This attribute is used to configure the testbed device.
+ * 0-use the correct key, 1-use an incorrect key, 2-disable protection.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_PMF_PROTECTION = 38,
+
+ /* Flag attribute to inject Disassociation frame to the connected AP.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_DISASSOC_TX = 39,
+
+ /* 8-bit unsigned value to configure an override for the RSNXE Used
+ * subfield in the MIC control field of the FTE in FT Reassociation
+ * Request frame.
+ * 0 - Default behavior, 1 - override with 1, 2 - override with 0.
+ * This attribute is used to configure the testbed device.
+ * This attribute can be configured only when STA is in associated state
+ * and the configuration is valid until the disconnection.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_FT_REASSOCREQ_RSNXE_USED = 40,
+
+ /* 8-bit unsigned value to configure the driver to ignore CSA (Channel
+ * Switch Announcement) when STA is in connected state.
+ * 0 - Default behavior, 1 - Ignore CSA.
+ * This attribute is used to configure the testbed device.
+ * This attribute can be configured only when STA is in associated state
+ * and the configuration is valid until the disconnection.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_IGNORE_CSA = 41,
+
+ /* Nested attribute values required to configure OCI (Operating Channel
+ * Information). Attributes defined in enum
+ * qca_wlan_vendor_attr_oci_override are nested within this attribute.
+ * This attribute is used to configure the testbed device.
+ * This attribute can be configured only when STA is in associated state
+ * and the configuration is valid until the disconnection.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OCI_OVERRIDE = 42,
+
+ /* 8-bit unsigned value to configure the driver/firmware to ignore SA
+ * Query timeout. If this configuration is enabled STA shall not send
+ * Deauthentication frmae when SA Query times out (mainly, after a
+ * channel switch when OCV is enabled).
+ * 0 - Default behavior, 1 - Ignore SA Query timeout.
+ * This attribute is used to configure the testbed device.
+ * This attribute can be configured only when STA is in associated state
+ * and the configuration is valid until the disconnection.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_IGNORE_SA_QUERY_TIMEOUT = 43,
+
+ /* 8-bit unsigned value to configure the driver/firmware to start or
+ * stop transmitting FILS discovery frames.
+ * 0 - Stop transmitting FILS discovery frames
+ * 1 - Start transmitting FILS discovery frames
+ * This attribute is used to configure the testbed device.
+ * This attribute can be configured only in AP mode and the
+ * configuration is valid until AP restart.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_FILS_DISCOVERY_FRAMES_TX = 44,
+
+ /* 8-bit unsigned value to configure the driver/firmware to enable or
+ * disable full bandwidth UL MU-MIMO subfield in the HE PHY capabilities
+ * information field.
+ * 0 - Disable full bandwidth UL MU-MIMO subfield
+ * 1 - Enable full bandwidth UL MU-MIMO subfield
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_FULL_BW_UL_MU_MIMO = 45,
+
+ /* 16-bit unsigned value to configure the driver with a specific BSS
+ * max idle period to advertise in the BSS Max Idle Period element
+ * (IEEE Std 802.11-2016, 9.4.2.79) in (Re)Association Request frames.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_BSS_MAX_IDLE_PERIOD = 46,
+
+ /* 8-bit unsigned value to configure the driver to use only RU 242 tone
+ * for data transmission.
+ * 0 - Default behavior, 1 - Configure RU 242 tone for data Tx.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_RU_242_TONE_TX = 47,
+
+ /* 8-bit unsigned value to configure the driver to disable data and
+ * management response frame transmission to test the BSS max idle
+ * feature.
+ * 0 - Default behavior, 1 - Disable data and management response Tx.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_DISABLE_DATA_MGMT_RSP_TX = 48,
+
+ /* 8-bit unsigned value to configure the driver/firmware to enable or
+ * disable Punctured Preamble Rx subfield in the HE PHY capabilities
+ * information field.
+ * 0 - Disable Punctured Preamble Rx subfield
+ * 1 - Enable Punctured Preamble Rx subfield
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_PUNCTURED_PREAMBLE_RX = 49,
+
+ /* 8-bit unsigned value to configure the driver to ignore the SAE H2E
+ * requirement mismatch for 6 GHz connection.
+ * 0 - Default behavior, 1 - Ignore SAE H2E requirement mismatch.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_IGNORE_H2E_RSNXE = 50,
+
+ /* 8-bit unsigned value to configure the driver to allow 6 GHz
+ * connection with all security modes.
+ * 0 - Default behavior, 1 - Allow 6 GHz connection with all security
+ * modes.
+ * This attribute is used for testing purposes.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_6GHZ_SECURITY_TEST_MODE = 51,
+
+ /* 8-bit unsigned value to configure the driver to transmit data with
+ * ER SU PPDU type.
+ *
+ * 0 - Default behavior, 1 - Enable ER SU PPDU type TX.
+ * This attribute is used for testing purposes.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ER_SU_PPDU_TYPE = 52,
+
+ /* 8-bit unsigned value to configure the driver to use Data or
+ * Management frame type for keep alive data.
+ * Uses enum qca_wlan_keep_alive_data_type values.
+ *
+ * This attribute is used for testing purposes.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_KEEP_ALIVE_FRAME_TYPE = 53,
+
+ /* 8-bit unsigned value to configure the driver to use scan request
+ * BSSID value in Probe Request frame RA(A1) during the scan. The
+ * driver saves this configuration and applies this setting to all user
+ * space scan requests until the setting is cleared. If this
+ * configuration is set, the driver uses the BSSID value from the scan
+ * request to set the RA(A1) in the Probe Request frames during the
+ * scan.
+ *
+ * 0 - Default behavior uses the broadcast RA in Probe Request frames.
+ * 1 - Uses the scan request BSSID in RA in Probe Request frames.
+ * This attribute is used for testing purposes.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_USE_BSSID_IN_PROBE_REQ_RA = 54,
+
+ /* 8-bit unsigned value to configure the driver to enable/disable the
+ * BSS max idle period support.
+ *
+ * 0 - Disable the BSS max idle support.
+ * 1 - Enable the BSS max idle support.
+ * This attribute is used for testing purposes.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_BSS_MAX_IDLE_PERIOD_ENABLE = 55,
+
+ /* 8-bit unsigned value to configure the driver/firmware to enable or
+ * disable Rx control frame to MultiBSS subfield in the HE MAC
+ * capabilities information field.
+ * 0 - Disable Rx control frame to MultiBSS subfield
+ * 1 - Enable Rx control frame to MultiBSS subfield
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_RX_CTRL_FRAME_TO_MBSS = 56,
+
+ /* 8-bit unsigned value to configure the driver/firmware to enable or
+ * disable Broadcast TWT support subfield in the HE MAC capabilities
+ * information field.
+ * 0 - Disable Broadcast TWT support subfield
+ * 1 - Enable Broadcast TWT support subfield
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_BCAST_TWT_SUPPORT = 57,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_twt_operation - Operation of the config TWT request
+ * Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_OPERATION.
+ * The response for the respective operations can be either synchronous or
+ * asynchronous (wherever specified). If synchronous, the response to this
+ * operation is obtained in the corresponding vendor command reply to the user
+ * space. For the asynchronous case the response is obtained as an event with
+ * the same operation type.
+ *
+ * Drivers shall support either of these modes but not both simultaneously.
+ * This support for asynchronous mode is advertised through the flag
+ * QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT. If this flag is not advertised,
+ * the driver shall support synchronous mode.
+ *
+ * @QCA_WLAN_TWT_SET: Setup a TWT session. Required parameters are configured
+ * through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
+ * qca_wlan_vendor_attr_twt_setup. Depending upon the
+ * @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT capability, this is either a
+ * synchronous or asynchronous operation.
+ *
+ * @QCA_WLAN_TWT_GET: Get the configured TWT parameters. Required parameters are
+ * obtained through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
+ * qca_wlan_vendor_attr_twt_setup. This is a synchronous operation.
+ *
+ * @QCA_WLAN_TWT_TERMINATE: Terminate the TWT session. Required parameters are
+ * obtained through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
+ * qca_wlan_vendor_attr_twt_setup. Valid only after the TWT session is setup.
+ * This terminate can either get triggered by the user space or can as well be
+ * a notification from the firmware if it initiates a terminate.
+ * Depending upon the @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT capability,
+ * the request from user space can either be a synchronous or asynchronous
+ * operation.
+ *
+ * @QCA_WLAN_TWT_SUSPEND: Suspend the TWT session. Required parameters are
+ * obtained through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
+ * qca_wlan_vendor_attr_twt_setup. Valid only after the TWT session is setup.
+ * Depending upon the @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT capability,
+ * this is either a synchronous or asynchronous operation.
+ *
+ * @QCA_WLAN_TWT_RESUME: Resume the TWT session. Required parameters are
+ * configured through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
+ * qca_wlan_vendor_attr_twt_resume. Valid only after the TWT session is setup.
+ * This can as well be a notification from the firmware on a QCA_WLAN_TWT_NUDGE
+ * request. Depending upon the @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT
+ * capability, this is either a synchronous or asynchronous operation.
+ *
+ * @QCA_WLAN_TWT_NUDGE: Suspend and resume the TWT session. TWT nudge is a
+ * combination of suspend and resume in a single request. Required parameters
+ * are configured through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the
+ * enum qca_wlan_vendor_attr_twt_nudge. Valid only after the TWT session is
+ * setup. Depending upon the @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT
+ * capability, this is either a synchronous or asynchronous operation.
+ *
+ * @QCA_WLAN_TWT_GET_STATS: Get the TWT session traffic statistics information.
+ * Refers the enum qca_wlan_vendor_attr_twt_stats. Valid only after the TWT
+ * session is setup. It's a synchronous operation.
+ *
+ * @QCA_WLAN_TWT_CLEAR_STATS: Clear TWT session traffic statistics information.
+ * Valid only after the TWT session is setup. It's a synchronous operation.
+ *
+ * @QCA_WLAN_TWT_GET_CAPABILITIES: Get TWT capabilities of this device and its
+ * peer. Refers the enum qca_wlan_vendor_attr_twt_capability. It's a synchronous
+ * operation.
+ *
+ * @QCA_WLAN_TWT_SETUP_READY_NOTIFY: Notify userspace that the firmare is
+ * ready for a new TWT session setup after it issued a TWT teardown.
+ *
+ * @QCA_WLAN_TWT_SET_PARAM: Configure TWT related parameters. Required
+ * parameters are obtained through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refer
+ * the enum qca_wlan_vendor_attr_twt_set_param.
+ */
+enum qca_wlan_twt_operation {
+ QCA_WLAN_TWT_SET = 0,
+ QCA_WLAN_TWT_GET = 1,
+ QCA_WLAN_TWT_TERMINATE = 2,
+ QCA_WLAN_TWT_SUSPEND = 3,
+ QCA_WLAN_TWT_RESUME = 4,
+ QCA_WLAN_TWT_NUDGE = 5,
+ QCA_WLAN_TWT_GET_STATS = 6,
+ QCA_WLAN_TWT_CLEAR_STATS = 7,
+ QCA_WLAN_TWT_GET_CAPABILITIES = 8,
+ QCA_WLAN_TWT_SETUP_READY_NOTIFY = 9,
+ QCA_WLAN_TWT_SET_PARAM = 10,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_config_twt: Defines attributes used by
+ * %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_OPERATION: u8 attribute. Specify the TWT
+ * operation of this request. Possible values are defined in enum
+ * qca_wlan_twt_operation. The parameters for the respective operation is
+ * specified through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS: Nested attribute representing the
+ * parameters configured for TWT. These parameters are represented by
+ * enum qca_wlan_vendor_attr_twt_setup, enum qca_wlan_vendor_attr_twt_resume,
+ * enum qca_wlan_vendor_attr_twt_set_param, or
+ * enum qca_wlan_vendor_attr_twt_stats based on the operation.
+ */
+enum qca_wlan_vendor_attr_config_twt {
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_OPERATION = 1,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_MAX =
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_bss_filter - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER.
+ * The user can add/delete the filter by specifying the BSSID/STA MAC address in
+ * QCA_WLAN_VENDOR_ATTR_BSS_FILTER_MAC_ADDR, filter type in
+ * QCA_WLAN_VENDOR_ATTR_BSS_FILTER_TYPE, add/delete action in
+ * QCA_WLAN_VENDOR_ATTR_BSS_FILTER_ACTION in the request. The user can get the
+ * statistics of an unassociated station by specifying the MAC address in
+ * QCA_WLAN_VENDOR_ATTR_BSS_FILTER_MAC_ADDR, station type in
+ * QCA_WLAN_VENDOR_ATTR_BSS_FILTER_TYPE, GET action in
+ * QCA_WLAN_VENDOR_ATTR_BSS_FILTER_ACTION in the request. The user also can get
+ * the statistics of all unassociated stations by specifying the Broadcast MAC
+ * address (ff:ff:ff:ff:ff:ff) in QCA_WLAN_VENDOR_ATTR_BSS_FILTER_MAC_ADDR with
+ * above procedure. In the response, driver shall specify statistics
+ * information nested in QCA_WLAN_VENDOR_ATTR_BSS_FILTER_STA_STATS.
+ */
+enum qca_wlan_vendor_attr_bss_filter {
+ QCA_WLAN_VENDOR_ATTR_BSS_FILTER_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_BSS_FILTER_MAC_ADDR = 1,
+ /* Other BSS filter type, unsigned 8 bit value. One of the values
+ * in enum qca_wlan_vendor_bss_filter_type.
+ */
+ QCA_WLAN_VENDOR_ATTR_BSS_FILTER_TYPE = 2,
+ /* Other BSS filter action, unsigned 8 bit value. One of the values
+ * in enum qca_wlan_vendor_bss_filter_action.
+ */
+ QCA_WLAN_VENDOR_ATTR_BSS_FILTER_ACTION = 3,
+ /* Array of nested attributes where each entry is the statistics
+ * information of the specified station that belong to another BSS.
+ * Attributes for each entry are taken from enum
+ * qca_wlan_vendor_bss_filter_sta_stats.
+ * Other BSS station configured in
+ * QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER with filter type
+ * QCA_WLAN_VENDOR_BSS_FILTER_TYPE_STA.
+ * Statistics returned by QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER
+ * with filter action QCA_WLAN_VENDOR_BSS_FILTER_ACTION_GET.
+ */
+ QCA_WLAN_VENDOR_ATTR_BSS_FILTER_STA_STATS = 4,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_BSS_FILTER_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_BSS_FILTER_MAX =
+ QCA_WLAN_VENDOR_ATTR_BSS_FILTER_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_bss_filter_type - Type of
+ * filter used in other BSS filter operations. Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER.
+ *
+ * @QCA_WLAN_VENDOR_BSS_FILTER_TYPE_BSSID: BSSID filter
+ * @QCA_WLAN_VENDOR_BSS_FILTER_TYPE_STA: Station MAC address filter
+ */
+enum qca_wlan_vendor_bss_filter_type {
+ QCA_WLAN_VENDOR_BSS_FILTER_TYPE_BSSID,
+ QCA_WLAN_VENDOR_BSS_FILTER_TYPE_STA,
+};
+
+/**
+ * enum qca_wlan_vendor_bss_filter_action - Type of
+ * action in other BSS filter operations. Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER.
+ *
+ * @QCA_WLAN_VENDOR_BSS_FILTER_ACTION_ADD: Add filter
+ * @QCA_WLAN_VENDOR_BSS_FILTER_ACTION_DEL: Delete filter
+ * @QCA_WLAN_VENDOR_BSS_FILTER_ACTION_GET: Get the statistics
+ */
+enum qca_wlan_vendor_bss_filter_action {
+ QCA_WLAN_VENDOR_BSS_FILTER_ACTION_ADD,
+ QCA_WLAN_VENDOR_BSS_FILTER_ACTION_DEL,
+ QCA_WLAN_VENDOR_BSS_FILTER_ACTION_GET,
+};
+
+/**
+ * enum qca_wlan_vendor_bss_filter_sta_stats - Attributes for
+ * the statistics of a specific unassociated station belonging to another BSS.
+ * The statistics provides information of the unassociated station
+ * filtered by other BSS operation - such as MAC, signal value.
+ * Used by the vendor command QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER.
+ *
+ * @QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_MAC: MAC address of the station.
+ * @QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_RSSI: Last received signal strength
+ * of the station. Unsigned 8 bit number containing RSSI.
+ * @QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_RSSI_TS: Time stamp of the host
+ * driver for the last received RSSI. Unsigned 64 bit number containing
+ * nanoseconds from the boottime.
+ */
+enum qca_wlan_vendor_bss_filter_sta_stats {
+ QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_INVALID = 0,
+ QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_MAC = 1,
+ QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_RSSI = 2,
+ QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_RSSI_TS = 3,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_AFTER_LAST,
+ QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_MAX =
+ QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_AFTER_LAST - 1
+};
+
+/* enum qca_wlan_nan_subcmd_type - Type of NAN command used by attribute
+ * QCA_WLAN_VENDOR_ATTR_NAN_SUBCMD_TYPE as a part of vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT.
+ */
+enum qca_wlan_nan_ext_subcmd_type {
+ /* Subcmd of type NAN Enable Request */
+ QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ = 1,
+ /* Subcmd of type NAN Disable Request */
+ QCA_WLAN_NAN_EXT_SUBCMD_TYPE_DISABLE_REQ = 2,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_nan_params - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT.
+ */
+enum qca_wlan_vendor_attr_nan_params {
+ QCA_WLAN_VENDOR_ATTR_NAN_INVALID = 0,
+ /* Carries NAN command for firmware component. Every vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT must contain this attribute with a
+ * payload containing the NAN command. NLA_BINARY attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_NAN_CMD_DATA = 1,
+ /* Indicates the type of NAN command sent with
+ * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT. enum qca_wlan_nan_ext_subcmd_type
+ * describes the possible range of values. This attribute is mandatory
+ * if the command being issued is either
+ * QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ or
+ * QCA_WLAN_NAN_EXT_SUBCMD_TYPE_DISABLE_REQ. NLA_U32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_NAN_SUBCMD_TYPE = 2,
+ /* Frequency (in MHz) of primary NAN discovery social channel in 2.4 GHz
+ * band. This attribute is mandatory when command type is
+ * QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ. NLA_U32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_NAN_DISC_24GHZ_BAND_FREQ = 3,
+ /* Frequency (in MHz) of secondary NAN discovery social channel in 5 GHz
+ * band. This attribute is optional and should be included when command
+ * type is QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ and NAN discovery
+ * has to be started on 5GHz along with 2.4GHz. NLA_U32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_NAN_DISC_5GHZ_BAND_FREQ = 4,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_MAX =
+ QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_AFTER_LAST - 1
+};
+
+/**
+ * qca_wlan_twt_setup_state: Represents the TWT session states.
+ *
+ * QCA_WLAN_TWT_SETUP_STATE_NOT_ESTABLISHED: TWT session not established.
+ * QCA_WLAN_TWT_SETUP_STATE_ACTIVE: TWT session is active.
+ * QCA_WLAN_TWT_SETUP_STATE_SUSPEND: TWT session is in suspended state.
+ */
+enum qca_wlan_twt_setup_state {
+ QCA_WLAN_TWT_SETUP_STATE_NOT_ESTABLISHED = 0,
+ QCA_WLAN_TWT_SETUP_STATE_ACTIVE = 1,
+ QCA_WLAN_TWT_SETUP_STATE_SUSPEND = 2,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_twt_setup: Represents attributes for
+ * TWT (Target Wake Time) setup request. These attributes are sent as part of
+ * %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP and
+ * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. Also used by
+ * attributes through %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST: Flag attribute.
+ * Disable (flag attribute not present) - Individual TWT
+ * Enable (flag attribute present) - Broadcast TWT.
+ * Individual means the session is between the STA and the AP.
+ * This session is established using a separate negotiation between
+ * STA and AP.
+ * Broadcast means the session is across multiple STAs and an AP. The
+ * configuration parameters are announced in Beacon frames by the AP.
+ * This is used in
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_REQ_TYPE: Required (u8).
+ * Unsigned 8-bit qca_wlan_vendor_twt_setup_req_type to
+ * specify the TWT request type. This is used in TWT SET operation.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TRIGGER: Flag attribute
+ * Enable (flag attribute present) - TWT with trigger support.
+ * Disable (flag attribute not present) - TWT without trigger support.
+ * Trigger means the AP will send the trigger frame to allow STA to send data.
+ * Without trigger, the STA will wait for the MU EDCA timer before
+ * transmitting the data.
+ * This is used in
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_TYPE: Required (u8)
+ * 0 - Announced TWT - In this mode, STA may skip few service periods to
+ * save more power. If STA wants to wake up, it will send a PS-POLL/QoS
+ * NULL frame to AP.
+ * 1 - Unannounced TWT - The STA will wakeup during every SP.
+ * This is a required parameter for
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_ID: Optional (u8)
+ * Flow ID is the unique identifier for each TWT session.
+ * If not provided then dialog ID will be set to zero.
+ * This is an optional parameter for
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Request and Response
+ * 3. TWT TERMINATE Request and Response
+ * 4. TWT SUSPEND Request and Response
+ * Flow ID values from 0 to 254 represent a single TWT session
+ * Flow ID value of 255 represents all TWT sessions for the following
+ * 1. TWT TERMINATE Request and Response
+ * 2. TWT SUSPEND Request and Response
+ * 4. TWT CLEAR STATISTICS request
+ * 5. TWT GET STATISTICS request and response
+ * If an invalid dialog ID is provided, status
+ * QCA_WLAN_VENDOR_TWT_STATUS_SESSION_NOT_EXIST will be returned.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_EXP: Required (u8)
+ * This attribute (exp) is used along with the mantissa to derive the
+ * wake interval using the following formula:
+ * pow(2,exp) = wake_intvl_us/wake_intvl_mantis
+ * Wake interval is the interval between 2 successive SP.
+ * This is a required parameter for
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_PROTECTION: Flag attribute
+ * Enable (flag attribute present) - Protection required.
+ * Disable (flag attribute not present) - Protection not required.
+ * If protection is enabled, then the AP will use protection
+ * mechanism using RTS/CTS to self to reserve the airtime.
+ * This is used in
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME: Optional (u32)
+ * This attribute is used as the SP offset which is the offset from
+ * TSF after which the wake happens. The units are in microseconds. If
+ * this attribute is not provided, then the value will be set to zero.
+ * This is an optional parameter for
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION: Required (u32)
+ * This is the duration of the service period. This is specified as
+ * multiples of 256 microseconds. Valid values are 0x1 to 0xFF.
+ * This is a required parameter for
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA: Required (u32)
+ * This attribute is used to configure wake interval mantissa.
+ * The units are in TU.
+ * This is a required parameter for
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_STATUS: Required (u8)
+ * This field is applicable for TWT response only.
+ * This contains status values in enum qca_wlan_vendor_twt_status
+ * and is passed to the userspace. This is used in TWT SET operation.
+ * This is a required parameter for
+ * 1. TWT SET Response
+ * 2. TWT TERMINATE Response
+ * 3. TWT SUSPEND Response
+ * 4. TWT RESUME Response
+ * 5. TWT NUDGE Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_RESP_TYPE: Required (u8)
+ * This field is applicable for TWT response only.
+ * This field contains response type from the TWT responder and is
+ * passed to the userspace. The values for this field are defined in
+ * enum qca_wlan_vendor_twt_setup_resp_type. This is used in TWT SET
+ * response.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME_TSF: Required (u64)
+ * In TWT setup command this field contains absolute TSF that will
+ * be used by TWT requester during setup.
+ * In TWT response this field contains absolute TSF value of the
+ * wake time received from the TWT responder and is passed to
+ * the userspace.
+ * This is an optional parameter for
+ * 1. TWT SET Request
+ * This is a required parameter for
+ * 1. TWT SET Response
+ * 2. TWT GET Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TWT_INFO_ENABLED: Flag attribute.
+ * Enable (flag attribute present) - Indicates that the TWT responder
+ * supports reception of TWT information frame from the TWT requestor.
+ * Disable (flag attribute not present) - Indicates that the responder
+ * doesn't support reception of TWT information frame from requestor.
+ * This is used in
+ * 1. TWT SET Response
+ * 2. TWT GET Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAC_ADDR: 6-byte MAC address
+ * Represents the MAC address of the peer for which the TWT session
+ * is being configured. This is used in AP mode to represent the respective
+ * client.
+ * In AP mode, this is a required parameter in response for
+ * 1. TWT SET
+ * 2. TWT GET
+ * 3. TWT TERMINATE
+ * 4. TWT SUSPEND
+ * In STA mode, this is an optional parameter in request and response for
+ * the above four TWT operations.
+ * In AP mode, this is a required parameter in request for
+ * 1. TWT GET
+ * 2. TWT TERMINATE
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MIN_WAKE_INTVL: Optional (u32)
+ * Minimum tolerance limit of wake interval parameter in microseconds.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX_WAKE_INTVL: Optional (u32)
+ * Maximum tolerance limit of wake interval parameter in microseconds.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MIN_WAKE_DURATION: Optional (u32)
+ * Minimum tolerance limit of wake duration parameter in microseconds.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX_WAKE_DURATION: Optional (u32)
+ * Maximum tolerance limit of wake duration parameter in microseconds.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_STATE: Optional (u32)
+ * TWT state for the given dialog id. The values for this are represented
+ * by enum qca_wlan_twt_setup_state.
+ * This is obtained through TWT GET operation.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL2_MANTISSA: Optional (u32)
+ * This attribute is used to configure wake interval mantissa.
+ * The unit is microseconds. This attribute, when specified, takes
+ * precedence over QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA.
+ * This parameter is used for
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST_ID: Optional (u8)
+ * This attribute is used to configure Broadcast TWT ID.
+ * The Broadcast TWT ID indicates a specific Broadcast TWT for which the
+ * transmitting STA is providing TWT parameters. The allowed values are 0 to 31.
+ * This parameter is used for
+ * 1. TWT SET Request
+ * 2. TWT TERMINATE Request
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST_RECOMMENDATION: Optional (u8)
+ * This attribute is used to configure Broadcast TWT recommendation.
+ * The Broadcast TWT Recommendation subfield contains a value that indicates
+ * recommendations on the types of frames that are transmitted by TWT
+ * scheduled STAs and scheduling AP during the broadcast TWT SP.
+ * The allowed values are 0 - 3.
+ * This parameter is used for
+ * 1. TWT SET Request
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST_PERSISTENCE: Optional (u8)
+ * This attribute is used to configure Broadcast TWT Persistence.
+ * The Broadcast TWT Persistence subfield indicates the number of
+ * TBTTs during which the Broadcast TWT SPs corresponding to this
+ * broadcast TWT Parameter set are present. The number of beacon intervals
+ * during which the Broadcast TWT SPs are present is equal to the value in the
+ * Broadcast TWT Persistence subfield plus 1 except that the value 255
+ * indicates that the Broadcast TWT SPs are present until explicitly terminated.
+ * This parameter is used for
+ * 1. TWT SET Request
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_RESPONDER_PM_MODE: Optional (u8)
+ * This attribute contains the value of the Responder PM Mode subfield (0 or 1)
+ * from TWT response frame.
+ * This parameter is used for
+ * 1. TWT SET Response
+ * 2. TWT GET Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_ANNOUNCE_TIMEOUT: Optional (u32)
+ * This attribute is used to configure the announce timeout value (in us) in
+ * the firmware. This timeout value is only applicable for the announced TWT. If
+ * the timeout value is non-zero the firmware waits up to the timeout value to
+ * use Data frame as an announcement frame. If the timeout value is 0 the
+ * firmware sends an explicit QoS NULL frame as the announcement frame on SP
+ * start. The default value in the firmware is 0.
+ * This parameter is used for
+ * 1. TWT SET Request
+ */
+enum qca_wlan_vendor_attr_twt_setup {
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST = 1,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_REQ_TYPE = 2,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TRIGGER = 3,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_TYPE = 4,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_ID = 5,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_EXP = 6,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_PROTECTION = 7,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME = 8,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION = 9,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA = 10,
+
+ /* TWT Response only attributes */
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_STATUS = 11,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_RESP_TYPE = 12,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME_TSF = 13,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TWT_INFO_ENABLED = 14,
+
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAC_ADDR = 15,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MIN_WAKE_INTVL = 16,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX_WAKE_INTVL = 17,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MIN_WAKE_DURATION = 18,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX_WAKE_DURATION = 19,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_STATE = 20,
+
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL2_MANTISSA = 21,
+
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST_ID = 22,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST_RECOMMENDATION = 23,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST_PERSISTENCE = 24,
+
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_RESPONDER_PM_MODE = 25,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_ANNOUNCE_TIMEOUT = 26,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX =
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_twt_status - Represents the status of the requested
+ * TWT operation
+ *
+ * @QCA_WLAN_VENDOR_TWT_STATUS_OK: TWT request successfully completed
+ * @QCA_WLAN_VENDOR_TWT_STATUS_TWT_NOT_ENABLED: TWT not enabled
+ * @QCA_WLAN_VENDOR_TWT_STATUS_USED_DIALOG_ID: TWT dialog ID is already used
+ * @QCA_WLAN_VENDOR_TWT_STATUS_SESSION_BUSY: TWT session is busy
+ * @QCA_WLAN_VENDOR_TWT_STATUS_SESSION_NOT_EXIST: TWT session does not exist
+ * @QCA_WLAN_VENDOR_TWT_STATUS_NOT_SUSPENDED: TWT session not in suspend state
+ * @QCA_WLAN_VENDOR_TWT_STATUS_INVALID_PARAM: Invalid parameters
+ * @QCA_WLAN_VENDOR_TWT_STATUS_NOT_READY: FW not ready
+ * @QCA_WLAN_VENDOR_TWT_STATUS_NO_RESOURCE: FW resource exhausted
+ * @QCA_WLAN_VENDOR_TWT_STATUS_NO_ACK: Peer AP/STA did not ACK the
+ * request/response frame
+ * @QCA_WLAN_VENDOR_TWT_STATUS_NO_RESPONSE: Peer AP did not send the response
+ * frame
+ * @QCA_WLAN_VENDOR_TWT_STATUS_DENIED: AP did not accept the request
+ * @QCA_WLAN_VENDOR_TWT_STATUS_UNKNOWN_ERROR: Adding TWT dialog failed due to an
+ * unknown reason
+ * @QCA_WLAN_VENDOR_TWT_STATUS_ALREADY_SUSPENDED: TWT session already in
+ * suspend state
+ * @QCA_WLAN_VENDOR_TWT_STATUS_IE_INVALID: FW has dropped the frame due to
+ * invalid IE in the received TWT frame
+ * @QCA_WLAN_VENDOR_TWT_STATUS_PARAMS_NOT_IN_RANGE: Parameters received from
+ * the responder are not in the specified range
+ * @QCA_WLAN_VENDOR_TWT_STATUS_PEER_INITIATED_TERMINATE: FW terminated the TWT
+ * session due to request from the responder. Used on the TWT_TERMINATE
+ * notification from the firmware.
+ * @QCA_WLAN_VENDOR_TWT_STATUS_ROAM_INITIATED_TERMINATE: FW terminated the TWT
+ * session due to roaming. Used on the TWT_TERMINATE notification from the
+ * firmware.
+ * @QCA_WLAN_VENDOR_TWT_STATUS_SCC_MCC_CONCURRENCY_TERMINATE: FW terminated the
+ * TWT session due to SCC (Single Channel Concurrency) and MCC (Multi Channel
+ * Concurrency). Used on the TWT_TERMINATE notification from the firmware.
+ * @QCA_WLAN_VENDOR_TWT_STATUS_ROAMING_IN_PROGRESS: FW rejected the TWT setup
+ * request due to roaming in progress.
+ * @QCA_WLAN_VENDOR_TWT_STATUS_CHANNEL_SWITCH_IN_PROGRESS: FW rejected the TWT
+ * setup request due to channel switch in progress.
+ * @QCA_WLAN_VENDOR_TWT_STATUS_SCAN_IN_PROGRESS: FW rejected the TWT setup
+ * request due to scan in progress.
+ * QCA_WLAN_VENDOR_TWT_STATUS_POWER_SAVE_EXIT_TERMINATE: The driver requested to
+ * terminate an existing TWT session on power save exit request from userspace.
+ * Used on the TWT_TERMINATE notification from the driver/firmware.
+ */
+enum qca_wlan_vendor_twt_status {
+ QCA_WLAN_VENDOR_TWT_STATUS_OK = 0,
+ QCA_WLAN_VENDOR_TWT_STATUS_TWT_NOT_ENABLED = 1,
+ QCA_WLAN_VENDOR_TWT_STATUS_USED_DIALOG_ID = 2,
+ QCA_WLAN_VENDOR_TWT_STATUS_SESSION_BUSY = 3,
+ QCA_WLAN_VENDOR_TWT_STATUS_SESSION_NOT_EXIST = 4,
+ QCA_WLAN_VENDOR_TWT_STATUS_NOT_SUSPENDED = 5,
+ QCA_WLAN_VENDOR_TWT_STATUS_INVALID_PARAM = 6,
+ QCA_WLAN_VENDOR_TWT_STATUS_NOT_READY = 7,
+ QCA_WLAN_VENDOR_TWT_STATUS_NO_RESOURCE = 8,
+ QCA_WLAN_VENDOR_TWT_STATUS_NO_ACK = 9,
+ QCA_WLAN_VENDOR_TWT_STATUS_NO_RESPONSE = 10,
+ QCA_WLAN_VENDOR_TWT_STATUS_DENIED = 11,
+ QCA_WLAN_VENDOR_TWT_STATUS_UNKNOWN_ERROR = 12,
+ QCA_WLAN_VENDOR_TWT_STATUS_ALREADY_SUSPENDED = 13,
+ QCA_WLAN_VENDOR_TWT_STATUS_IE_INVALID = 14,
+ QCA_WLAN_VENDOR_TWT_STATUS_PARAMS_NOT_IN_RANGE = 15,
+ QCA_WLAN_VENDOR_TWT_STATUS_PEER_INITIATED_TERMINATE = 16,
+ QCA_WLAN_VENDOR_TWT_STATUS_ROAM_INITIATED_TERMINATE = 17,
+ QCA_WLAN_VENDOR_TWT_STATUS_SCC_MCC_CONCURRENCY_TERMINATE = 18,
+ QCA_WLAN_VENDOR_TWT_STATUS_ROAMING_IN_PROGRESS = 19,
+ QCA_WLAN_VENDOR_TWT_STATUS_CHANNEL_SWITCH_IN_PROGRESS = 20,
+ QCA_WLAN_VENDOR_TWT_STATUS_SCAN_IN_PROGRESS = 21,
+ QCA_WLAN_VENDOR_TWT_STATUS_POWER_SAVE_EXIT_TERMINATE = 22,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_twt_resume - Represents attributes for
+ * TWT (Target Wake Time) resume request. These attributes are sent as part of
+ * %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME and
+ * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. Also used by
+ * attributes through %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT: Optional (u8)
+ * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT2_TWT: Optional (u32)
+ * These attributes are used as the SP offset which is the offset from TSF after
+ * which the wake happens. The units are in microseconds. Please note that
+ * _NEXT_TWT is limited to u8 whereas _NEXT2_TWT takes the u32 data.
+ * _NEXT2_TWT takes the precedence over _NEXT_TWT and thus the recommendation
+ * is to use _NEXT2_TWT. If neither of these attributes is provided, the value
+ * will be set to zero.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT_SIZE: Required (u32)
+ * This attribute represents the next TWT subfield size.
+ * Value 0 represents 0 bits, 1 represents 32 bits, 2 for 48 bits,
+ * and 4 for 64 bits.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_FLOW_ID: Required (u8).
+ * Flow ID is the unique identifier for each TWT session. This attribute
+ * represents the respective TWT session to resume.
+ * Flow ID values from 0 to 254 represent a single TWT session
+ * Flow ID value of 255 represents all TWT sessions.
+ * If an invalid dialog id is provided, status
+ * QCA_WLAN_VENDOR_TWT_STATUS_SESSION_NOT_EXIST will be returned.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_MAC_ADDR: 6-byte MAC address
+ * Represents the MAC address of the peer to which TWT Resume is
+ * being sent. This is used in AP mode to represent the respective
+ * client and is a required parameter. In STA mode, this is an optional
+ * parameter
+ */
+enum qca_wlan_vendor_attr_twt_resume {
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT = 1,
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT_SIZE = 2,
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_FLOW_ID = 3,
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT2_TWT = 4,
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_MAC_ADDR = 5,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_MAX =
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_twt_nudge - Represents attributes for
+ * TWT (Target Wake Time) nudge request. TWT nudge is a combination of suspend
+ * and resume in a single request. These attributes are sent as part of
+ * %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_FLOW_ID: Required (u8)
+ * Flow ID is the unique identifier for each TWT session. This attribute
+ * represents the respective TWT session to suspend and resume.
+ * Flow ID values from 0 to 254 represent a single TWT session
+ * Flow ID value of 255 represents all TWT sessions in TWT NUDGE request
+ * and response.
+ * If an invalid dialog id is provided, status
+ * QCA_WLAN_VENDOR_TWT_STATUS_SESSION_NOT_EXIST will be returned.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME: Required (u32)
+ * This attribute is used as the SP offset which is the offset from
+ * TSF after which the wake happens. The units are in microseconds.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_NEXT_TWT_SIZE: Required (u32)
+ * This attribute represents the next TWT subfield size.
+ * Value 0 represents 0 bits, 1 represents 32 bits, 2 for 48 bits,
+ * and 4 for 64 bits.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_MAC_ADDR: 6-byte MAC address
+ * Represents the MAC address of the peer to which TWT Suspend and Resume is
+ * being sent. This is used in AP mode to represent the respective
+ * client and is a required parameter. In STA mode, this is an optional
+ * parameter.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME_TSF: Optional (u64)
+ * This field contains absolute TSF value of the time at which the TWT
+ * session will be resumed.
+ */
+enum qca_wlan_vendor_attr_twt_nudge {
+ QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_FLOW_ID = 1,
+ QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME = 2,
+ QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_NEXT_TWT_SIZE = 3,
+ QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_MAC_ADDR = 4,
+ QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME_TSF = 5,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_MAX =
+ QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_twt_stats: Represents attributes for
+ * TWT (Target Wake Time) get statistics and clear statistics request.
+ * These attributes are sent as part of
+ * %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_FLOW_ID: Required (u8)
+ * Flow ID is the unique identifier for each TWT session. This attribute
+ * represents the respective TWT session for get and clear TWT statistics.
+ * Flow ID values from 0 to 254 represent a single TWT session
+ * Flow ID value of 255 represents all TWT sessions in
+ * 1) TWT GET STATISTICS request and response
+ * 2) TWT CLEAR STATISTICS request
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_MAC_ADDR: 6-byte MAC address
+ * Represents the MAC address of the peer for which TWT Statistics
+ * is required.
+ * In AP mode this is used to represent the respective
+ * client and is a required parameter for
+ * 1) TWT GET STATISTICS request and response
+ * 2) TWT CLEAR STATISTICS request and response
+ * In STA mode, this is an optional parameter.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_SESSION_WAKE_DURATION: Required (u32)
+ * This is the duration of the service period in microseconds.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVG_WAKE_DURATION: Required (u32)
+ * Average of the actual wake duration observed so far. Unit is microseconds.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS: Required (u32)
+ * The number of TWT service periods elapsed so far.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_MIN_WAKE_DURATION: Required (u32)
+ * This is the minimum value of the wake duration observed across
+ * QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS. Unit is
+ * microseconds.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_MAX_WAKE_DURATION: Required (u32)
+ * This is the maximum value of wake duration observed across
+ * QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS. Unit is
+ * microseconds.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_TX_MPDU: Required (u32)
+ * Average number of MPDUs transmitted successfully across
+ * QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_RX_MPDU: Required (u32)
+ * Average number of MPDUs received successfully across
+ * QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_TX_PACKET_SIZE: Required (u32)
+ * Average number of bytes transmitted successfully across
+ * QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_RX_PACKET_SIZE: Required (u32)
+ * Average number of bytes received successfully across
+ * QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_STATUS: Required (u32)
+ * Status of the TWT GET STATISTICS request.
+ * This contains status values in enum qca_wlan_vendor_twt_status
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ */
+enum qca_wlan_vendor_attr_twt_stats {
+ QCA_WLAN_VENDOR_ATTR_TWT_STATS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TWT_STATS_FLOW_ID = 1,
+ QCA_WLAN_VENDOR_ATTR_TWT_STATS_MAC_ADDR = 2,
+ QCA_WLAN_VENDOR_ATTR_TWT_STATS_SESSION_WAKE_DURATION = 3,
+ QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVG_WAKE_DURATION = 4,
+ QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS = 5,
+ QCA_WLAN_VENDOR_ATTR_TWT_STATS_MIN_WAKE_DURATION = 6,
+ QCA_WLAN_VENDOR_ATTR_TWT_STATS_MAX_WAKE_DURATION = 7,
+ QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_TX_MPDU = 8,
+ QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_RX_MPDU = 9,
+ QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_TX_PACKET_SIZE = 10,
+ QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_RX_PACKET_SIZE = 11,
+ QCA_WLAN_VENDOR_ATTR_TWT_STATS_STATUS = 12,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TWT_STATS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TWT_STATS_MAX =
+ QCA_WLAN_VENDOR_ATTR_TWT_STATS_AFTER_LAST - 1,
+};
+
+/**
+ * qca_wlan_twt_get_capa - Represents the bitmap of TWT capabilities
+ * supported by the device and the peer.
+ * Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_GET_CAPABILITIES
+ *
+ * @QCA_WLAN_TWT_CAPA_REQUESTOR: TWT requestor support is advertised by
+ * TWT non-scheduling STA. This capability is advertised in the HE
+ * Capability/Extended Capabilities information element in the
+ * Association Request frame by the device.
+ *
+ * @QCA_WLAN_TWT_CAPA_RESPONDER: TWT responder support is advertised by
+ * the TWT scheduling AP. This capability is advertised in the Extended
+ * Capabilities/HE Capabilities information element.
+ *
+ * @QCA_WLAN_TWT_CAPA_BROADCAST: On the requestor side, this indicates support
+ * for the broadcast TWT functionality. On the responder side, this indicates
+ * support for the role of broadcast TWT scheduling functionality. This
+ * capability is advertised in the HE Capabilities information element.
+ *
+ * @QCA_WLAN_TWT_CAPA_TWT_FLEXIBLE: The device supports flexible TWT schedule.
+ * This capability is advertised in the HE Capabilities information element.
+ *
+ * @QCA_WLAN_TWT_CAPA_REQUIRED: The TWT Required is advertised by AP to indicate
+ * that it mandates the associated HE STAs to support TWT. This capability is
+ * advertised by AP in the HE Operation Parameters field of the HE Operation
+ * information element.
+ */
+enum qca_wlan_twt_capa {
+ QCA_WLAN_TWT_CAPA_REQUESTOR = BIT(0),
+ QCA_WLAN_TWT_CAPA_RESPONDER = BIT(1),
+ QCA_WLAN_TWT_CAPA_BROADCAST = BIT(2),
+ QCA_WLAN_TWT_CAPA_FLEXIBLE = BIT(3),
+ QCA_WLAN_TWT_CAPA_REQUIRED = BIT(4),
+};
+
+/**
+ * enum qca_wlan_vendor_attr_twt_capability - Represents attributes for TWT
+ * get capabilities request type. Used by QCA_WLAN_TWT_GET_CAPABILITIES TWT
+ * operation.
+ * @QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_MAC_ADDR: 6-byte MAC address
+ * Represents the MAC address of the peer for which the TWT capabilities
+ * are being queried. This is used in AP mode to represent the respective
+ * client. In STA mode, this is an optional parameter.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_SELF: (u16).
+ * Self TWT capabilities. Carries a bitmap of TWT capabilities specified in
+ * enum qca_wlan_twt_capa.
+ * @QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_PEER: (u16).
+ * Peer TWT capabilities. Carries a bitmap of TWT capabilities specified in
+ * enum qca_wlan_twt_capa.
+ */
+enum qca_wlan_vendor_attr_twt_capability {
+ QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_MAC_ADDR = 1,
+ QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_SELF = 2,
+ QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_PEER = 3,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_MAX =
+ QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_twt_set_param: Represents attributes for
+ * TWT (Target Wake Time) related parameters. It is used when
+ * %QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_OPERATION is set to %QCA_WLAN_TWT_SET_PARAM.
+ * These attributes are sent as part of %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SET_PARAM_AP_AC_VALUE: Optional (u8)
+ * This attribute configures AC parameters to be used for all TWT
+ * sessions in AP mode.
+ * Uses the enum qca_wlan_ac_type values.
+ */
+enum qca_wlan_vendor_attr_twt_set_param {
+ QCA_WLAN_VENDOR_ATTR_TWT_SET_PARAM_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TWT_SET_PARAM_AP_AC_VALUE = 1,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TWT_SET_PARAM_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TWT_SET_PARAM_MAX =
+ QCA_WLAN_VENDOR_ATTR_TWT_SET_PARAM_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_twt_setup_resp_type - Represents the response type by
+ * the TWT responder
+ *
+ * @QCA_WLAN_VENDOR_TWT_RESP_ALTERNATE: TWT responder suggests TWT
+ * parameters that are different from TWT requesting STA suggested
+ * or demanded TWT parameters
+ * @QCA_WLAN_VENDOR_TWT_RESP_DICTATE: TWT responder demands TWT
+ * parameters that are different from TWT requesting STA TWT suggested
+ * or demanded parameters
+ * @QCA_WLAN_VENDOR_TWT_RESP_REJECT: TWT responder rejects TWT
+ * setup
+ * @QCA_WLAN_VENDOR_TWT_RESP_ACCEPT: TWT responder accepts the TWT
+ * setup.
+ */
+enum qca_wlan_vendor_twt_setup_resp_type {
+ QCA_WLAN_VENDOR_TWT_RESP_ALTERNATE = 1,
+ QCA_WLAN_VENDOR_TWT_RESP_DICTATE = 2,
+ QCA_WLAN_VENDOR_TWT_RESP_REJECT = 3,
+ QCA_WLAN_VENDOR_TWT_RESP_ACCEPT = 4,
+};
+
+/**
+ * enum qca_wlan_vendor_twt_setup_req_type - Required (u8)
+ * Represents the setup type being requested for TWT.
+ * @QCA_WLAN_VENDOR_TWT_SETUP_REQUEST: STA is not specifying all the TWT
+ * parameters but relying on AP to fill the parameters during the negotiation.
+ * @QCA_WLAN_VENDOR_TWT_SETUP_SUGGEST: STA will provide all the suggested
+ * values which the AP may accept or AP may provide alternative parameters
+ * which the STA may accept.
+ * @QCA_WLAN_VENDOR_TWT_SETUP_DEMAND: STA is not willing to accept any
+ * alternate parameters than the requested ones.
+ */
+enum qca_wlan_vendor_twt_setup_req_type {
+ QCA_WLAN_VENDOR_TWT_SETUP_REQUEST = 1,
+ QCA_WLAN_VENDOR_TWT_SETUP_SUGGEST = 2,
+ QCA_WLAN_VENDOR_TWT_SETUP_DEMAND = 3,
+};
+
+/**
+ * enum qca_wlan_roam_scan_event_type - Type of roam scan event
+ *
+ * Indicates the type of roam scan event sent by firmware/driver.
+ *
+ * @QCA_WLAN_ROAM_SCAN_TRIGGER_EVENT: Roam scan trigger event type.
+ * @QCA_WLAN_ROAM_SCAN_STOP_EVENT: Roam scan stopped event type.
+ */
+enum qca_wlan_roam_scan_event_type {
+ QCA_WLAN_ROAM_SCAN_TRIGGER_EVENT = 0,
+ QCA_WLAN_ROAM_SCAN_STOP_EVENT = 1,
+};
+
+/**
+ * enum qca_wlan_roam_scan_trigger_reason - Roam scan trigger reason
+ *
+ * Indicates the reason for triggering roam scan by firmware/driver.
+ *
+ * @QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_LOW_RSSI: Due to low RSSI of current AP.
+ * @QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_HIGH_PER: Due to high packet error rate.
+ */
+enum qca_wlan_roam_scan_trigger_reason {
+ QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_LOW_RSSI = 0,
+ QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_HIGH_PER = 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_roam_scan - Vendor subcmd attributes to report
+ * roam scan related details from driver/firmware to user space. enum values
+ * are used for NL attributes sent with
+ * %QCA_NL80211_VENDOR_SUBCMD_ROAM_SCAN_EVENT sub command.
+ */
+enum qca_wlan_vendor_attr_roam_scan {
+ QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_INVALID = 0,
+ /* Encapsulates type of roam scan event being reported. enum
+ * qca_wlan_roam_scan_event_type describes the possible range of
+ * values. u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_EVENT_TYPE = 1,
+ /* Encapsulates reason for triggering roam scan. enum
+ * qca_wlan_roam_scan_trigger_reason describes the possible range of
+ * values. u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_TRIGGER_REASON = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_MAX =
+ QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_cfr_data_transport_modes - Defines QCA vendor CFR data
+ * transport modes and is used by the attribute
+ * QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE as a part of the vendor
+ * command QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG.
+ * @QCA_WLAN_VENDOR_CFR_DATA_RELAY_FS: Use relayfs to send CFR data.
+ * @QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS: Use netlink events to send CFR
+ * data. The data shall be encapsulated within
+ * QCA_WLAN_VENDOR_ATTR_PEER_CFR_RESP_DATA along with the vendor sub command
+ * QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG as an asynchronous event.
+ */
+enum qca_wlan_vendor_cfr_data_transport_modes {
+ QCA_WLAN_VENDOR_CFR_DATA_RELAY_FS = 0,
+ QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS = 1,
+};
+
+/**
+ * enum qca_wlan_vendor_cfr_method - QCA vendor CFR methods used by
+ * attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD as part of vendor
+ * command QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG.
+ * @QCA_WLAN_VENDOR_CFR_METHOD_QOS_NULL: CFR method using QoS Null frame
+ * @QCA_WLAN_VENDOR_CFR_QOS_NULL_WITH_PHASE: CFR method using QoS Null frame
+ * with phase
+ * @QCA_WLAN_VENDOR_CFR_PROBE_RESPONSE: CFR method using Probe Response frame
+ */
+enum qca_wlan_vendor_cfr_method {
+ QCA_WLAN_VENDOR_CFR_METHOD_QOS_NULL = 0,
+ QCA_WLAN_VENDOR_CFR_QOS_NULL_WITH_PHASE = 1,
+ QCA_WLAN_VENDOR_CFR_PROBE_RESPONSE = 2,
+};
+
+/**
+ * enum qca_wlan_vendor_cfr_capture_type - QCA vendor CFR capture type used by
+ * attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_TYPE.
+ * @QCA_WLAN_VENDOR_CFR_DIRECT_FTM: Filter directed FTM ACK frames.
+ * @QCA_WLAN_VENDOR_CFR_ALL_FTM_ACK: Filter all FTM ACK frames.
+ * @QCA_WLAN_VENDOR_CFR_DIRECT_NDPA_NDP: Filter NDPA NDP directed frames.
+ * @QCA_WLAN_VENDOR_CFR_TA_RA: Filter frames based on TA/RA/Subtype which
+ * is provided by one or more of below attributes:
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER
+ * @QCA_WLAN_CFR_ALL_PACKET: Filter all packets.
+ * @QCA_WLAN_VENDOR_CFR_NDPA_NDP_ALL: Filter all NDPA NDP frames.
+ */
+enum qca_wlan_vendor_cfr_capture_type {
+ QCA_WLAN_VENDOR_CFR_DIRECT_FTM = 0,
+ QCA_WLAN_VENDOR_CFR_ALL_FTM_ACK = 1,
+ QCA_WLAN_VENDOR_CFR_DIRECT_NDPA_NDP = 2,
+ QCA_WLAN_VENDOR_CFR_TA_RA = 3,
+ QCA_WLAN_VENDOR_CFR_ALL_PACKET = 4,
+ QCA_WLAN_VENDOR_CFR_NDPA_NDP_ALL = 5,
+};
+
+/**
+ * enum qca_wlan_vendor_peer_cfr_capture_attr - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG to configure peer
+ * Channel Frequency Response capture parameters and enable periodic CFR
+ * capture.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CFR_PEER_MAC_ADDR: Optional (6-byte MAC address)
+ * MAC address of peer. This is for CFR version 1 only.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE: Required (flag)
+ * Enable peer CFR capture. This attribute is mandatory to enable peer CFR
+ * capture. If this attribute is not present, peer CFR capture is disabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_BANDWIDTH: Optional (u8)
+ * BW of measurement, attribute uses the values in enum nl80211_chan_width
+ * Supported values: 20, 40, 80, 80+80, 160.
+ * Note that all targets may not support all bandwidths.
+ * This attribute is mandatory for version 1 if attribute
+ * QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_PERIODICITY: Optional (u32)
+ * Periodicity of CFR measurement in milliseconds.
+ * Periodicity should be a multiple of Base timer.
+ * Current Base timer value supported is 10 milliseconds (default).
+ * 0 for one shot capture.
+ * This attribute is mandatory for version 1 if attribute
+ * QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD: Optional (u8)
+ * Method used to capture Channel Frequency Response.
+ * Attribute uses the values defined in enum qca_wlan_vendor_cfr_method.
+ * This attribute is mandatory for version 1 if attribute
+ * QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PERIODIC_CFR_CAPTURE_ENABLE: Optional (flag)
+ * Enable periodic CFR capture.
+ * This attribute is mandatory for version 1 to enable Periodic CFR capture.
+ * If this attribute is not present, periodic CFR capture is disabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_VERSION: Optional (u8)
+ * Value is 1 or 2 since there are two versions of CFR capture. Two versions
+ * can't be enabled at same time. This attribute is mandatory if target
+ * support both versions and use one of them.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE_GROUP_BITMAP: Optional (u32)
+ * This attribute is mandatory for version 2 if
+ * QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY is used.
+ * Bits 15:0 bitfield indicates which group is to be enabled.
+ * Bits 31:16 Reserved for future use.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_DURATION: Optional (u32)
+ * CFR capture duration in microsecond. This attribute is mandatory for
+ * version 2 if attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_INTERVAL is used.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_INTERVAL: Optional (u32)
+ * CFR capture interval in microsecond. This attribute is mandatory for
+ * version 2 if attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_DURATION is used.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_TYPE: Optional (u32)
+ * CFR capture type is defined in enum qca_wlan_vendor_cfr_capture_type.
+ * This attribute is mandatory for version 2.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_UL_MU_MASK: Optional (u64)
+ * Bitfield indicating which user in the current UL MU transmissions are
+ * enabled for CFR capture. Bits 36 to 0 indicate user indexes for 37 users in
+ * a UL MU transmission. If bit 0 is set, the CFR capture will happen for user
+ * index 0 in the current UL MU transmission. If bits 0 and 2 are set, CFR
+ * capture for UL MU TX corresponds to user indices 0 and 2. Bits 63:37 are
+ * reserved for future use. This is for CFR version 2 only.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_FREEZE_TLV_DELAY_COUNT: Optional (u32)
+ * Indicates the number of consecutive RX frames to be skipped before CFR
+ * capture is enabled again. This is for CFR version 2 only.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TABLE: Nested attribute containing
+ * one or more %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY attributes.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY: Nested attribute containing
+ * the following group attributes:
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NUMBER,
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA,
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA,
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK,
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK,
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NSS,
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_BW,
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER,
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER,
+ * %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NUMBER: Optional (u32)
+ * Target supports multiple groups for some configurations. The group number
+ * can be any value between 0 and 15. This is for CFR version 2 only.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA: Optional (6-byte MAC address)
+ * Transmitter address which is used to filter frames. This MAC address takes
+ * effect with QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK. This is for CFR
+ * version 2 only.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA: Optional (6-byte MAC address)
+ * Receiver address which is used to filter frames. This MAC address takes
+ * effect with QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK. This is for CFR
+ * version 2 only.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK: Optional (6-byte MAC address)
+ * Mask of transmitter address which is used to filter frames. This is for CFR
+ * version 2 only.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK: Optional (6-byte MAC address)
+ * Mask of receiver address which is used to filter frames. This is for CFR
+ * version 2 only.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NSS: Optional (u32)
+ * Indicates frames with a specific NSS will be filtered for CFR capture.
+ * This is for CFR version 2 only. This is a bitmask. Bits 7:0 request CFR
+ * capture to be done for frames matching the NSS specified within this bitmask.
+ * Bits 31:8 are reserved for future use. Bits 7:0 map to NSS:
+ * bit 0 : NSS 1
+ * bit 1 : NSS 2
+ * ...
+ * bit 7 : NSS 8
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_BW: Optional (u32)
+ * Indicates frames with a specific bandwidth will be filtered for CFR capture.
+ * This is for CFR version 2 only. This is a bitmask. Bits 4:0 request CFR
+ * capture to be done for frames matching the bandwidths specified within this
+ * bitmask. Bits 31:5 are reserved for future use. Bits 4:0 map to bandwidth
+ * numerated in enum nl80211_band (although not all bands may be supported
+ * by a given device).
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER: Optional (u32)
+ * Management frames matching the subtype filter categories will be filtered in
+ * by MAC for CFR capture. This is a bitmask in which each bit represents the
+ * corresponding Management frame subtype value per IEEE Std 802.11-2016,
+ * 9.2.4.1.3 Type and Subtype subfields. For example, Beacon frame control type
+ * is 8 and its value is 1 << 8 = 0x100. This is for CFR version 2 only.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER: Optional (u32)
+ * Control frames matching the subtype filter categories will be filtered in by
+ * MAC for CFR capture. This is a bitmask in which each bit represents the
+ * corresponding Control frame subtype value per IEEE Std 802.11-2016,
+ * 9.2.4.1.3 Type and Subtype subfields. This is for CFR version 2 only.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER: Optional (u32)
+ * Data frames matching the subtype filter categories will be filtered in by
+ * MAC for CFR capture. This is a bitmask in which each bit represents the
+ * corresponding Data frame subtype value per IEEE Std 802.11-2016,
+ * 9.2.4.1.3 Type and Subtype subfields. This is for CFR version 2 only.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE: Optional (u8)
+ * Userspace can use this attribute to specify the driver about which transport
+ * mode shall be used by the driver to send CFR data to userspace. Uses values
+ * from enum qca_wlan_vendor_cfr_data_transport_modes. When this attribute is
+ * not present, the driver shall use the default transport mechanism which is
+ * QCA_WLAN_VENDOR_CFR_DATA_RELAY_FS.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_RECEIVER_PID: Optional (u32)
+ * Userspace can use this attribute to specify the nl port id of the application
+ * which receives the CFR data and processes it further so that the drivers can
+ * unicast the netlink events to a specific application. Optionally included
+ * when QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE is set to
+ * QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS, not required otherwise. The drivers
+ * shall multicast the netlink events when this attribute is not included.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_CFR_RESP_DATA: Required (NLA_BINARY).
+ * This attribute will be used by the driver to encapsulate and send CFR data
+ * to userspace along with QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG as an
+ * asynchronous event when the driver is configured to send CFR data using
+ * netlink events with %QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS.
+ */
+enum qca_wlan_vendor_peer_cfr_capture_attr {
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_CFR_PEER_MAC_ADDR = 1,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE = 2,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_BANDWIDTH = 3,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_PERIODICITY = 4,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD = 5,
+ QCA_WLAN_VENDOR_ATTR_PERIODIC_CFR_CAPTURE_ENABLE = 6,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_VERSION = 7,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE_GROUP_BITMAP = 8,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_DURATION = 9,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_INTERVAL = 10,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_TYPE = 11,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_UL_MU_MASK = 12,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_FREEZE_TLV_DELAY_COUNT = 13,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TABLE = 14,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY = 15,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NUMBER = 16,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA = 17,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA = 18,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK = 19,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK = 20,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NSS = 21,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_BW = 22,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER = 23,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER = 24,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER = 25,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE = 26,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_RECEIVER_PID = 27,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_RESP_DATA = 28,
+
+ /* Keep last */
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_MAX =
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_throughput_level - Current throughput level
+ *
+ * Indicates the current level of throughput calculated by the driver. The
+ * driver may choose different thresholds to decide whether the throughput level
+ * is low or medium or high based on variety of parameters like physical link
+ * capacity of the current connection, the number of packets being dispatched
+ * per second, etc. The throughput level events might not be consistent with the
+ * actual current throughput value being observed.
+ *
+ * @QCA_WLAN_THROUGHPUT_LEVEL_LOW: Low level of throughput
+ * @QCA_WLAN_THROUGHPUT_LEVEL_MEDIUM: Medium level of throughput
+ * @QCA_WLAN_THROUGHPUT_LEVEL_HIGH: High level of throughput
+ */
+enum qca_wlan_throughput_level {
+ QCA_WLAN_THROUGHPUT_LEVEL_LOW = 0,
+ QCA_WLAN_THROUGHPUT_LEVEL_MEDIUM = 1,
+ QCA_WLAN_THROUGHPUT_LEVEL_HIGH = 2,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_throughput_change - Vendor subcmd attributes to
+ * report throughput changes from the driver to user space. enum values are used
+ * for netlink attributes sent with
+ * %QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT sub command.
+ */
+enum qca_wlan_vendor_attr_throughput_change {
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_INVALID = 0,
+ /* Indicates the direction of throughput in which the change is being
+ * reported. u8 attribute. Value is 0 for TX and 1 for RX.
+ */
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_DIRECTION = 1,
+ /* Indicates the newly observed throughput level. enum
+ * qca_wlan_throughput_level describes the possible range of values.
+ * u8 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_THROUGHPUT_LEVEL = 2,
+ /* Indicates the driver's guidance on the new value to be set to
+ * kernel's TCP parameter tcp_limit_output_bytes. u32 attribute. The
+ * driver may optionally include this attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_TCP_LIMIT_OUTPUT_BYTES = 3,
+ /* Indicates the driver's guidance on the new value to be set to
+ * kernel's TCP parameter tcp_adv_win_scale. s8 attribute. Possible
+ * values are from -31 to 31. The driver may optionally include this
+ * attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_TCP_ADV_WIN_SCALE = 4,
+ /* Indicates the driver's guidance on the new value to be set to
+ * kernel's TCP parameter tcp_delack_seg. u32 attribute. The driver may
+ * optionally include this attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_TCP_DELACK_SEG = 5,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_MAX =
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_coex_config_profiles - This enum defines different types of
+ * traffic streams that can be prioritized one over the other during coex
+ * scenarios.
+ * The types defined in this enum are categorized in the below manner.
+ * 0 - 31 values corresponds to WLAN
+ * 32 - 63 values corresponds to BT
+ * 64 - 95 values corresponds to Zigbee
+ * @QCA_WIFI_STA_DISCOVERY: Prioritize discovery frames for WLAN STA
+ * @QCA_WIFI_STA_CONNECTION: Prioritize connection frames for WLAN STA
+ * @QCA_WIFI_STA_CLASS_3_MGMT: Prioritize class 3 mgmt frames for WLAN STA
+ * @QCA_WIFI_STA_DATA : Prioritize data frames for WLAN STA
+ * @QCA_WIFI_STA_ALL: Priritize all frames for WLAN STA
+ * @QCA_WIFI_SAP_DISCOVERY: Prioritize discovery frames for WLAN SAP
+ * @QCA_WIFI_SAP_CONNECTION: Prioritize connection frames for WLAN SAP
+ * @QCA_WIFI_SAP_CLASS_3_MGMT: Prioritize class 3 mgmt frames for WLAN SAP
+ * @QCA_WIFI_SAP_DATA: Prioritize data frames for WLAN SAP
+ * @QCA_WIFI_SAP_ALL: Prioritize all frames for WLAN SAP
+ * @QCA_BT_A2DP: Prioritize BT A2DP
+ * @QCA_BT_BLE: Prioritize BT BLE
+ * @QCA_BT_SCO: Prioritize BT SCO
+ * @QCA_ZB_LOW: Prioritize Zigbee Low
+ * @QCA_ZB_HIGH: Prioritize Zigbee High
+ */
+enum qca_coex_config_profiles {
+ /* 0 - 31 corresponds to WLAN */
+ QCA_WIFI_STA_DISCOVERY = 0,
+ QCA_WIFI_STA_CONNECTION = 1,
+ QCA_WIFI_STA_CLASS_3_MGMT = 2,
+ QCA_WIFI_STA_DATA = 3,
+ QCA_WIFI_STA_ALL = 4,
+ QCA_WIFI_SAP_DISCOVERY = 5,
+ QCA_WIFI_SAP_CONNECTION = 6,
+ QCA_WIFI_SAP_CLASS_3_MGMT = 7,
+ QCA_WIFI_SAP_DATA = 8,
+ QCA_WIFI_SAP_ALL = 9,
+ QCA_WIFI_CASE_MAX = 31,
+ /* 32 - 63 corresponds to BT */
+ QCA_BT_A2DP = 32,
+ QCA_BT_BLE = 33,
+ QCA_BT_SCO = 34,
+ QCA_BT_CASE_MAX = 63,
+ /* 64 - 95 corresponds to Zigbee */
+ QCA_ZB_LOW = 64,
+ QCA_ZB_HIGH = 65,
+ QCA_ZB_CASE_MAX = 95,
+ /* 0xff is default value if the u8 profile value is not set. */
+ QCA_COEX_CONFIG_PROFILE_DEFAULT_VALUE = 255
+};
+
+/**
+ * enum qca_vendor_attr_coex_config_types - Coex configurations types.
+ * This enum defines the valid set of values of coex configuration types. These
+ * values may used by attribute
+ * %QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_CONFIG_TYPE.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_RESET: Reset all the
+ * weights to default values.
+ * @QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_START: Start to config
+ * weights with configurability value.
+ */
+enum qca_vendor_attr_coex_config_types {
+ QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_RESET = 1,
+ QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_START = 2,
+};
+
+/**
+ * enum qca_vendor_attr_coex_config - Specifies vendor coex config attributes
+ *
+ * @QCA_VENDOR_ATTR_COEX_CONFIG_PROFILES: This attribute contains variable
+ * length array of 8-bit values from enum qca_coex_config_profiles.
+ * FW will prioritize the profiles in the order given in the array encapsulated
+ * in this attribute.
+ * For example:
+ * -----------------------------------------------------------------------
+ * | 1 | 34 | 32 | 65 |
+ * -----------------------------------------------------------------------
+ * If the attribute contains the values defined in above array then it means
+ * 1) Wifi STA connection has priority over BT_SCO, BT_A2DP and ZIGBEE HIGH.
+ * 2) BT_SCO has priority over BT_A2DP.
+ * 3) BT_A2DP has priority over ZIGBEE HIGH.
+ * Profiles which are not listed in this array shall not be preferred over the
+ * profiles which are listed in the array as a part of this attribute.
+ */
+enum qca_vendor_attr_coex_config {
+ QCA_VENDOR_ATTR_COEX_CONFIG_INVALID = 0,
+ QCA_VENDOR_ATTR_COEX_CONFIG_PROFILES = 1,
+
+ /* Keep last */
+ QCA_VENDOR_ATTR_COEX_CONFIG_AFTER_LAST,
+ QCA_VENDOR_ATTR_COEX_CONFIG_MAX =
+ QCA_VENDOR_ATTR_COEX_CONFIG_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_vendor_attr_coex_config_three_way - Specifies vendor coex config
+ * attributes
+ * Attributes for data used by QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG
+ *
+ * QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_CONFIG_TYPE: u32 attribute.
+ * Indicate config type.
+ * The config types are 32-bit values from qca_vendor_attr_coex_config_types
+ *
+ * @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_1: u32 attribute.
+ * Indicate the Priority 1 profiles.
+ * The profiles are 8-bit values from enum qca_coex_config_profiles.
+ * In same priority level, maximum to 4 profiles can be set here.
+ * @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_2: u32 attribute.
+ * Indicate the Priority 2 profiles.
+ * The profiles are 8-bit values from enum qca_coex_config_profiles.
+ * In same priority level, maximum to 4 profiles can be set here.
+ * @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_3: u32 attribute.
+ * Indicate the Priority 3 profiles.
+ * The profiles are 8-bit values from enum qca_coex_config_profiles.
+ * In same priority level, maximum to 4 profiles can be set here.
+ * @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_4: u32 attribute.
+ * Indicate the Priority 4 profiles.
+ * The profiles are 8-bit values from enum qca_coex_config_profiles.
+ * In same priority level, maximum to 4 profiles can be set here.
+ * NOTE:
+ * Limitations for QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_x priority
+ * arrangement:
+ * 1: In the same u32 attribute (priority x), the profiles enum values own
+ * same priority level.
+ * 2: 0xff is default value if the u8 profile value is not set.
+ * 3: max to 4 rules/profiles in same priority level.
+ * 4: max to 4 priority level (priority 1 - priority 4)
+ * 5: one priority level only supports one scenario from WLAN/BT/ZB,
+ * hybrid rules not support.
+ * 6: if WMI_COEX_CONFIG_THREE_WAY_COEX_RESET called, priority x will
+ * remain blank to reset all parameters.
+ * For example:
+ *
+ * If the attributes as follow:
+ * priority 1:
+ * ------------------------------------
+ * | 0xff | 0 | 1 | 2 |
+ * ------------------------------------
+ * priority 2:
+ * -------------------------------------
+ * | 0xff | 0xff | 0xff | 32 |
+ * -------------------------------------
+ * priority 3:
+ * -------------------------------------
+ * | 0xff | 0xff | 0xff | 65 |
+ * -------------------------------------
+ * then it means:
+ * 1: WIFI_STA_DISCOVERY, WIFI_STA_CLASS_3_MGMT and WIFI_STA_CONNECTION
+ * owns same priority level.
+ * 2: WIFI_STA_DISCOVERY, WIFI_STA_CLASS_3_MGMT and WIFI_STA_CONNECTION
+ * has priority over BT_A2DP and ZB_HIGH.
+ * 3: BT_A2DP has priority over ZB_HIGH.
+ */
+
+enum qca_vendor_attr_coex_config_three_way {
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_INVALID = 0,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_CONFIG_TYPE = 1,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_1 = 2,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_2 = 3,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_3 = 4,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_4 = 5,
+
+ /* Keep last */
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_AFTER_LAST,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_MAX =
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_link_properties - Represent the link properties.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAC_ADDR: MAC address of the peer
+ * (STA/AP) for the connected link.
+ * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_STA_FLAGS: Attribute containing a
+ * &struct nl80211_sta_flag_update for the respective connected link. MAC
+ * address of the peer represented by
+ * QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAC_ADDR.
+ */
+enum qca_wlan_vendor_attr_link_properties {
+ QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_INVALID = 0,
+ /* 1 - 3 are reserved */
+ QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAC_ADDR = 4,
+ QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_STA_FLAGS = 5,
+
+ /* Keep last */
+ QCA_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST,
+ QCA_VENDOR_ATTR_LINK_PROPERTIES_MAX =
+ QCA_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_vendor_attr_peer_stats_cache_type - Represents peer stats cache type
+ * This enum defines the valid set of values of peer stats cache types. These
+ * values are used by attribute
+ * %QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_TX_RATE_STATS: Represents peer TX rate statistics
+ * @QCA_WLAN_VENDOR_ATTR_PEER_RX_RATE_STATS: Represents peer RX rate statistics
+ * @QCA_WLAN_VENDOR_ATTR_PEER_TX_SOJOURN_STATS: Represents peer TX sojourn
+ * statistics
+ */
+enum qca_vendor_attr_peer_stats_cache_type {
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE_INVALID = 0,
+
+ QCA_WLAN_VENDOR_ATTR_PEER_TX_RATE_STATS,
+ QCA_WLAN_VENDOR_ATTR_PEER_RX_RATE_STATS,
+ QCA_WLAN_VENDOR_ATTR_PEER_TX_SOJOURN_STATS,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_peer_stats_cache_params - This enum defines
+ * attributes required for QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH
+ * Information in these attributes is used to flush peer rate statistics from
+ * the driver to user application.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE: Unsigned 32-bit attribute
+ * Indicate peer statistics cache type.
+ * The statistics types are 32-bit values from
+ * enum qca_vendor_attr_peer_stats_cache_type.
+ * @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_MAC: Unsigned 8-bit array
+ * of size 6 octets, representing the peer MAC address.
+ * @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_DATA: Opaque data attribute
+ * containing buffer of statistics to send to application layer entity.
+ * @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_COOKIE: Unsigned 64-bit attribute
+ * representing a cookie for peer unique session.
+ */
+enum qca_wlan_vendor_attr_peer_stats_cache_params {
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_INVALID = 0,
+
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE = 1,
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_MAC = 2,
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_DATA = 3,
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_COOKIE = 4,
+
+ /* Keep last */
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_LAST,
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_MAX =
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_LAST - 1
+};
+
+/**
+ * enum qca_mpta_helper_attr_zigbee_state - Current Zigbee state
+ * This enum defines all the possible states of Zigbee, which can be
+ * delivered in the QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_STATE attribute.
+ *
+ * @ZIGBEE_IDLE: Zigbee in idle state
+ * @ZIGBEE_FORM_NETWORK: Zigbee forming network
+ * @ZIGBEE_WAIT_JOIN: Zigbee waiting for joining network
+ * @ZIGBEE_JOIN: Zigbee joining network
+ * @ZIGBEE_NETWORK_UP: Zigbee network is up
+ * @ZIGBEE_HMI: Zigbee in HMI mode
+ */
+enum qca_mpta_helper_attr_zigbee_state {
+ ZIGBEE_IDLE = 0,
+ ZIGBEE_FORM_NETWORK = 1,
+ ZIGBEE_WAIT_JOIN = 2,
+ ZIGBEE_JOIN = 3,
+ ZIGBEE_NETWORK_UP = 4,
+ ZIGBEE_HMI = 5,
+};
+
+/*
+ * enum qca_mpta_helper_vendor_attr - Attributes used in vendor sub-command
+ * QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG.
+ */
+enum qca_mpta_helper_vendor_attr {
+ QCA_MPTA_HELPER_VENDOR_ATTR_INVALID = 0,
+ /* Optional attribute used to update Zigbee state.
+ * enum qca_mpta_helper_attr_zigbee_state.
+ * NLA_U32 attribute.
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_STATE = 1,
+ /* Optional attribute used to configure WLAN duration for Shape-OCS
+ * during interrupt.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_NON_WLAN_DURATION.
+ * Value range 0 ~ 300 (ms).
+ * NLA_U32 attribute.
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_INT_WLAN_DURATION = 2,
+ /* Optional attribute used to configure non-WLAN duration for Shape-OCS
+ * during interrupt.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_WLAN_DURATION.
+ * Value range 0 ~ 300 (ms).
+ * NLA_U32 attribute.
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_INT_NON_WLAN_DURATION = 3,
+ /* Optional attribute used to configure WLAN duration for Shape-OCS
+ * monitor period.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_NON_WLAN_DURATION.
+ * Value range 0 ~ 300 (ms)
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_MON_WLAN_DURATION = 4,
+ /* Optional attribute used to configure non-WLAN duration for Shape-OCS
+ * monitor period.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_WLAN_DURATION.
+ * Value range 0 ~ 300 (ms)
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_MON_NON_WLAN_DURATION = 5,
+ /* Optional attribute used to configure OCS interrupt duration.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_OCS_DURATION.
+ * Value range 1000 ~ 20000 (ms)
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_INT_OCS_DURATION = 6,
+ /* Optional attribute used to configure OCS monitor duration.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_OCS_DURATION.
+ * Value range 1000 ~ 20000 (ms)
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_MON_OCS_DURATION = 7,
+ /* Optional attribute used to notify WLAN firmware the current Zigbee
+ * channel.
+ * Value range 11 ~ 26
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_CHAN = 8,
+ /* Optional attribute used to configure WLAN mute duration.
+ * Value range 0 ~ 400 (ms)
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_WLAN_MUTE_DURATION = 9,
+
+ /* keep last */
+ QCA_MPTA_HELPER_VENDOR_ATTR_AFTER_LAST,
+ QCA_MPTA_HELPER_VENDOR_ATTR_MAX =
+ QCA_MPTA_HELPER_VENDOR_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_beacon_reporting_op_types - Defines different types of
+ * operations for which %QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING can be used.
+ * Will be used by %QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE.
+ *
+ * @QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START: Sent by userspace to the driver
+ * to request the driver to start reporting Beacon frames.
+ * @QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP: Sent by userspace to the driver to
+ * request the driver to stop reporting Beacon frames.
+ * @QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO: Sent by the driver to
+ * userspace to report received Beacon frames.
+ * @QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE: Sent by the driver to userspace
+ * to indicate that the driver is going to pause reporting Beacon frames.
+ */
+enum qca_wlan_vendor_beacon_reporting_op_types {
+ QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START = 0,
+ QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP = 1,
+ QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO = 2,
+ QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE = 3,
+};
+
+/**
+ * enum qca_wlan_vendor_beacon_reporting_pause_reasons - Defines different types
+ * of reasons for which the driver is pausing reporting Beacon frames. Will be
+ * used by %QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_PAUSE_REASON.
+ *
+ * @QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_UNSPECIFIED: For unspecified
+ * reasons.
+ * @QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_SCAN_STARTED: When the
+ * driver/firmware is starting a scan.
+ * @QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_DISCONNECTED: When the
+ * driver/firmware disconnects from the ESS and indicates the disconnection to
+ * userspace (non-seamless roaming case). This reason code will be used by the
+ * driver/firmware to indicate stopping of beacon report events. Userspace will
+ * need to start beacon reporting again (if desired) by sending vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING with
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START after the next connection is
+ * completed.
+ */
+enum qca_wlan_vendor_beacon_reporting_pause_reasons {
+ QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_UNSPECIFIED = 0,
+ QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_SCAN_STARTED = 1,
+ QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_DISCONNECTED = 2,
+};
+
+/*
+ * enum qca_wlan_vendor_attr_beacon_reporting_params - List of attributes used
+ * in vendor sub-command QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING.
+ */
+enum qca_wlan_vendor_attr_beacon_reporting_params {
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_INVALID = 0,
+ /* Specifies the type of operation that the vendor command/event is
+ * intended for. Possible values for this attribute are defined in
+ * enum qca_wlan_vendor_beacon_reporting_op_types. u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE = 1,
+ /* Optionally set by userspace to request the driver to report Beacon
+ * frames using asynchronous vendor events when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START. NLA_FLAG attribute.
+ * If this flag is not set, the driver will only update Beacon frames in
+ * cfg80211 scan cache but not send any vendor events.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_ACTIVE_REPORTING = 2,
+ /* Optionally used by userspace to request the driver/firmware to report
+ * Beacon frames periodically when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START.
+ * u32 attribute, indicates the period of Beacon frames to be reported
+ * and in the units of beacon interval.
+ * If this attribute is missing in the command, then the default value
+ * of 1 will be assumed by driver, i.e., to report every Beacon frame.
+ * Zero is an invalid value.
+ * If a valid value is received for this attribute, the driver will
+ * update the cfg80211 scan cache periodically as per the value received
+ * in this attribute in addition to updating the cfg80211 scan cache
+ * when there is significant change in Beacon frame IEs.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_PERIOD = 3,
+ /* Used by the driver to encapsulate the SSID when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO.
+ * u8 array with a maximum size of 32.
+ *
+ * When generating beacon report from non-MBSSID Beacon frame, the SSID
+ * will be taken from the SSID element of the received Beacon frame.
+ *
+ * When generating beacon report from Multiple BSSID Beacon frame and if
+ * the BSSID of the current connected BSS matches the BSSID of the
+ * transmitting BSS, the SSID will be taken from the SSID element of the
+ * received Beacon frame.
+ *
+ * When generating beacon report from Multiple BSSID Beacon frame and if
+ * the BSSID of the current connected BSS matches the BSSID of one of
+ * the* nontransmitting BSSs, the SSID will be taken from the SSID field
+ * included in the nontransmitted BSS profile whose derived BSSID is
+ * same as the BSSID of the current connected BSS. When there is no
+ * nontransmitted BSS profile whose derived BSSID is same as the BSSID
+ * of current connected* BSS, this attribute will not be present.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_SSID = 4,
+ /* Used by the driver to encapsulate the BSSID of the AP to which STA is
+ * currently connected to when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO. u8 array with a
+ * fixed size of 6 bytes.
+ *
+ * When generating beacon report from a Multiple BSSID beacon and the
+ * current connected BSSID matches one of the nontransmitted BSSIDs in a
+ * Multiple BSSID set, this BSSID will be that particular nontransmitted
+ * BSSID and not the transmitted BSSID (i.e., the transmitting address
+ * of the Beacon frame).
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_BSSID = 5,
+ /* Used by the driver to encapsulate the frequency in MHz on which
+ * the Beacon frame was received when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is
+ * set to QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_FREQ = 6,
+ /* Used by the driver to encapsulate the Beacon interval
+ * when the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO.
+ * u16 attribute. The value will be copied from the Beacon frame and the
+ * units are TUs.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_BI = 7,
+ /* Used by the driver to encapsulate the Timestamp field from the Beacon
+ * frame when the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set
+ * to QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO.
+ * u64 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_TSF = 8,
+ /* Used by the driver to encapsulate the CLOCK_BOOTTIME when this
+ * Beacon frame is received in the driver when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO. u64 attribute, in
+ * the units of nanoseconds. This value is expected to have accuracy of
+ * about 10 ms.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_BOOTTIME_WHEN_RECEIVED = 9,
+ /* Used by the driver to encapsulate the IEs of the Beacon frame from
+ * which this event is generated when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO. u8 array.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_IES = 10,
+ /* Used by the driver to specify the reason for the driver/firmware to
+ * pause sending beacons to userspace when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE. Possible values are
+ * defined in enum qca_wlan_vendor_beacon_reporting_pause_reasons, u32
+ * attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_PAUSE_REASON = 11,
+ /* Used by the driver to specify whether the driver will automatically
+ * resume reporting beacon events to userspace later (for example after
+ * the ongoing off-channel activity is completed etc.) when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE. NLA_FLAG attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES = 12,
+ /* Optionally set by userspace to request the driver not to resume
+ * beacon reporting after a pause is completed, when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START. NLA_FLAG attribute.
+ * If this flag is set, the driver will not resume beacon reporting
+ * after any pause in beacon reporting is completed. Userspace has to
+ * send QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START command again in order
+ * to initiate beacon reporting again. If this flag is set in the recent
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START command, then in the
+ * subsequent QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE event (if any)
+ * the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES shall not be
+ * set by the driver. Setting this flag until and unless there is a
+ * specific need is not recommended as there is a chance of some beacons
+ * received after pause command and next start command being not
+ * reported.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_DO_NOT_RESUME = 13,
+
+ /* Keep last */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_LAST,
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_MAX =
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_LAST - 1
+};
+
+/**
+ * enum qca_vendor_interop_issues_ap_type - Interop issue types
+ * This enum defines the valid set of values of interop issue types. These
+ * values are used by attribute %QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_TYPE.
+ *
+ * @QCA_VENDOR_INTEROP_ISSUES_AP_ON_STA_PS: The AP has power save interop issue
+ * when the STA's Qpower feature is enabled.
+ */
+enum qca_vendor_interop_issues_ap_type {
+ QCA_VENDOR_INTEROP_ISSUES_AP_INVALID = 0,
+ QCA_VENDOR_INTEROP_ISSUES_AP_ON_STA_PS = 1,
+};
+
+/**
+ * enum qca_vendor_attr_interop_issues_ap - attribute for AP with interop issues
+ * Values are used by %QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_INVALID: Invalid value
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_TYPE: Interop issue type
+ * 32-bit unsigned value. The values defined in enum
+ * qca_vendor_interop_issues_ap_type are used.
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_LIST: APs' BSSID container
+ * array of nested QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_BSSID attributes.
+ * It is present and mandatory for the command but is not used for the event
+ * since only a single BSSID is reported in an event.
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_BSSID: AP's BSSID 6-byte MAC address.
+ * It is used within the nested QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_LIST
+ * attribute in command case and without such encapsulation in the event case.
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_AFTER_LAST: last value
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_MAX: max value
+ */
+enum qca_vendor_attr_interop_issues_ap {
+ QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_INVALID,
+ QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_TYPE,
+ QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_LIST,
+ QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_BSSID,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_MAX =
+ QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_vendor_oem_device_type - Represents the target device in firmware.
+ * It is used by QCA_WLAN_VENDOR_ATTR_OEM_DEVICE_INFO.
+ *
+ * @QCA_VENDOR_OEM_DEVICE_VIRTUAL: The command is intended for
+ * a virtual device.
+ *
+ * @QCA_VENDOR_OEM_DEVICE_PHYSICAL: The command is intended for
+ * a physical device.
+ */
+enum qca_vendor_oem_device_type {
+ QCA_VENDOR_OEM_DEVICE_VIRTUAL = 0,
+ QCA_VENDOR_OEM_DEVICE_PHYSICAL = 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_oem_data_params - Used by the vendor command/event
+ * QCA_NL80211_VENDOR_SUBCMD_OEM_DATA.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_OEM_DATA_CMD_DATA: This NLA_BINARY attribute is
+ * used to set/query the data to/from the firmware. On query, the same
+ * attribute is used to carry the respective data in the reply sent by the
+ * driver to userspace. The request to set/query the data and the format of the
+ * respective data from the firmware are embedded in the attribute. The
+ * maximum size of the attribute payload is 1024 bytes.
+ * Userspace has to set the QCA_WLAN_VENDOR_ATTR_OEM_DATA_RESPONSE_EXPECTED
+ * attribute when the data is queried from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_OEM_DEVICE_INFO: The binary blob will be routed
+ * based on this field. This optional attribute is included to specify whether
+ * the device type is a virtual device or a physical device for the
+ * command/event. This attribute can be omitted for a virtual device (default)
+ * command/event.
+ * This u8 attribute is used to carry information for the device type using
+ * values defined by enum qca_vendor_oem_device_type.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_OEM_DATA_RESPONSE_EXPECTED: This NLA_FLAG attribute
+ * is set when the userspace queries data from the firmware. This attribute
+ * should not be set when userspace sets the OEM data to the firmware.
+ */
+enum qca_wlan_vendor_attr_oem_data_params {
+ QCA_WLAN_VENDOR_ATTR_OEM_DATA_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_OEM_DATA_CMD_DATA = 1,
+ QCA_WLAN_VENDOR_ATTR_OEM_DEVICE_INFO = 2,
+ QCA_WLAN_VENDOR_ATTR_OEM_DATA_RESPONSE_EXPECTED = 3,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_OEM_DATA_PARAMS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OEM_DATA_PARAMS_MAX =
+ QCA_WLAN_VENDOR_ATTR_OEM_DATA_PARAMS_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_avoid_frequency_ext - Defines attributes to be
+ * used with vendor command/event QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_RANGE: Required
+ * Nested attribute containing multiple ranges with following attributes:
+ * QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_START,
+ * QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_END, and
+ * QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_POWER_CAP_DBM.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_START: Required (u32)
+ * Starting center frequency in MHz.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_END: Required (u32)
+ * Ending center frequency in MHz.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_POWER_CAP_DBM:
+ * s32 attribute, optional. It is a per frequency range attribute.
+ * The maximum TX power limit from user space is to be applied on an
+ * unrestricted interface for corresponding frequency range. It is also
+ * possible that the actual TX power may be even lower than this cap due to
+ * other considerations such as regulatory compliance, SAR, etc. In absence of
+ * this attribute the driver shall follow current behavior which means
+ * interface (SAP/P2P) function can keep operating on an unsafe channel with TX
+ * power derived by the driver based on regulatory/SAR during interface up.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_IFACES_BITMASK:
+ * u32 attribute, optional. Indicates all the interface types which are
+ * restricted for all frequency ranges provided in
+ * %QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_START and
+ * %QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_END.
+ * This attribute encapsulates bitmasks of interface types defined in
+ * enum nl80211_iftype. If an interface is marked as restricted the driver must
+ * move to a safe channel and if no safe channel is available the driver shall
+ * terminate that interface functionality. In absence of this attribute,
+ * interface (SAP/P2P) can still continue operating on an unsafe channel with
+ * TX power limit derived from either
+ * %QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_POWER_CAP_DBM or based on
+ * regulatory/SAE limits if %QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_POWER_CAP_DBM
+ * is not provided.
+ */
+enum qca_wlan_vendor_attr_avoid_frequency_ext {
+ QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_RANGE = 1,
+ QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_START = 2,
+ QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_END = 3,
+ QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_POWER_CAP_DBM = 4,
+ QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_IFACES_BITMASK = 5,
+
+ QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_MAX =
+ QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_AFTER_LAST - 1
+};
+
+/*
+ * enum qca_wlan_vendor_attr_add_sta_node_params - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_ADD_STA_NODE.
+ */
+enum qca_wlan_vendor_attr_add_sta_node_params {
+ QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_INVALID = 0,
+ /* 6 byte MAC address of STA */
+ QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_MAC_ADDR = 1,
+ /* Authentication algorithm used by the station of size u16;
+ * defined in enum nl80211_auth_type.
+ */
+ QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_AUTH_ALGO = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_PARAM_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_PARAM_MAX =
+ QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_PARAM_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_btc_chain_mode - Specifies BT coex chain mode.
+ * This enum defines the valid set of values of BT coex chain mode.
+ * These values are used by attribute %QCA_VENDOR_ATTR_BTC_CHAIN_MODE of
+ * %QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE.
+ *
+ * @QCA_BTC_CHAIN_SHARED: chains of BT and WLAN 2.4G are shared.
+ * @QCA_BTC_CHAIN_SEPARATED: chains of BT and WLAN 2.4G are separated.
+ */
+enum qca_btc_chain_mode {
+ QCA_BTC_CHAIN_SHARED = 0,
+ QCA_BTC_CHAIN_SEPARATED = 1,
+};
+
+/**
+ * enum qca_vendor_attr_btc_chain_mode - Specifies attributes for BT coex
+ * chain mode.
+ * Attributes for data used by QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE.
+ *
+ * @QCA_VENDOR_ATTR_COEX_BTC_CHAIN_MODE: u32 attribute.
+ * Indicates the BT coex chain mode, are 32-bit values from
+ * enum qca_btc_chain_mode. This attribute is mandatory.
+ *
+ * @QCA_VENDOR_ATTR_COEX_BTC_CHAIN_MODE_RESTART: flag attribute.
+ * If set, vdev should be restarted when BT coex chain mode is updated.
+ * This attribute is optional.
+ */
+enum qca_vendor_attr_btc_chain_mode {
+ QCA_VENDOR_ATTR_BTC_CHAIN_MODE_INVALID = 0,
+ QCA_VENDOR_ATTR_BTC_CHAIN_MODE = 1,
+ QCA_VENDOR_ATTR_BTC_CHAIN_MODE_RESTART = 2,
+
+ /* Keep last */
+ QCA_VENDOR_ATTR_BTC_CHAIN_MODE_LAST,
+ QCA_VENDOR_ATTR_BTC_CHAIN_MODE_MAX =
+ QCA_VENDOR_ATTR_BTC_CHAIN_MODE_LAST - 1,
+};
+
+/**
+ * enum qca_vendor_wlan_sta_flags - Station feature flags
+ * Bits will be set to 1 if the corresponding features are enabled.
+ * @QCA_VENDOR_WLAN_STA_FLAG_AMPDU: AMPDU is enabled for the station
+ * @QCA_VENDOR_WLAN_STA_FLAG_TX_STBC: TX Space-time block coding is enabled
+ for the station
+ * @QCA_VENDOR_WLAN_STA_FLAG_RX_STBC: RX Space-time block coding is enabled
+ for the station
+ */
+enum qca_vendor_wlan_sta_flags {
+ QCA_VENDOR_WLAN_STA_FLAG_AMPDU = BIT(0),
+ QCA_VENDOR_WLAN_STA_FLAG_TX_STBC = BIT(1),
+ QCA_VENDOR_WLAN_STA_FLAG_RX_STBC = BIT(2),
+};
+
+/**
+ * enum qca_vendor_wlan_sta_guard_interval - Station guard interval
+ * @QCA_VENDOR_WLAN_STA_GI_800_NS: Legacy normal guard interval
+ * @QCA_VENDOR_WLAN_STA_GI_400_NS: Legacy short guard interval
+ * @QCA_VENDOR_WLAN_STA_GI_1600_NS: Guard interval used by HE
+ * @QCA_VENDOR_WLAN_STA_GI_3200_NS: Guard interval used by HE
+ */
+enum qca_vendor_wlan_sta_guard_interval {
+ QCA_VENDOR_WLAN_STA_GI_800_NS = 0,
+ QCA_VENDOR_WLAN_STA_GI_400_NS = 1,
+ QCA_VENDOR_WLAN_STA_GI_1600_NS = 2,
+ QCA_VENDOR_WLAN_STA_GI_3200_NS = 3,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_get_sta_info - Defines attributes
+ * used by QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAC:
+ * Required attribute in request for AP mode only, 6-byte MAC address,
+ * corresponding to the station's MAC address for which information is
+ * requested. For STA mode this is not required as the info always correspond
+ * to the self STA and the current/last association.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_FLAGS:
+ * Optionally used in response, u32 attribute, contains a bitmap of different
+ * fields defined in enum qca_vendor_wlan_sta_flags, used in AP mode only.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_GUARD_INTERVAL:
+ * Optionally used in response, u32 attribute, possible values are defined in
+ * enum qca_vendor_wlan_sta_guard_interval, used in AP mode only.
+ * Guard interval used by the station.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_RETRY_COUNT:
+ * Optionally used in response, u32 attribute, used in AP mode only.
+ * Value indicates the number of data frames received from station with retry
+ * bit set to 1 in FC.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BC_MC_COUNT:
+ * Optionally used in response, u32 attribute, used in AP mode only.
+ * Counter for number of data frames with broadcast or multicast address in
+ * the destination address received from the station.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RETRY_SUCCEED:
+ * Optionally used in response, u32 attribute, used in both STA and AP modes.
+ * Value indicates the number of data frames successfully transmitted only
+ * after retrying the packets and for which the TX status has been updated
+ * back to host from target.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RETRY_EXHAUSTED:
+ * Optionally used in response, u32 attribute, used in both STA and AP mode.
+ * Value indicates the number of data frames not transmitted successfully even
+ * after retrying the packets for the number of times equal to the total number
+ * of retries allowed for that packet and for which the TX status has been
+ * updated back to host from target.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_TOTAL:
+ * Optionally used in response, u32 attribute, used in AP mode only.
+ * Counter in the target for the number of data frames successfully transmitted
+ * to the station.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY:
+ * Optionally used in response, u32 attribute, used in AP mode only.
+ * Value indicates the number of data frames successfully transmitted only
+ * after retrying the packets.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY_EXHAUSTED:
+ * Optionally used in response, u32 attribute, used in both STA & AP mode.
+ * Value indicates the number of data frames not transmitted successfully even
+ * after retrying the packets for the number of times equal to the total number
+ * of retries allowed for that packet.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_PROBE_REQ_BMISS_COUNT: u32, used in
+ * the STA mode only. Represent the number of probe requests sent by the STA
+ * while attempting to roam on missing certain number of beacons from the
+ * connected AP. If queried in the disconnected state, this represents the
+ * count for the last connected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_PROBE_RESP_BMISS_COUNT: u32, used in
+ * the STA mode. Represent the number of probe responses received by the station
+ * while attempting to roam on missing certain number of beacons from the
+ * connected AP. When queried in the disconnected state, this represents the
+ * count when in last connected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_ALL_COUNT: u32, used in the
+ * STA mode only. Represents the total number of frames sent out by STA
+ * including Data, ACK, RTS, CTS, Control Management. This data is maintained
+ * only for the connect session. Represents the count of last connected session,
+ * when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_COUNT: u32, used in the STA mode.
+ * Total number of RTS sent out by the STA. This data is maintained per connect
+ * session. Represents the count of last connected session, when queried in the
+ * disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_RETRY_FAIL_COUNT: u32, used in the
+ * STA mode.Represent the number of RTS transmission failure that reach retry
+ * limit. This data is maintained per connect session. Represents the count of
+ * last connected session, when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_NON_AGGREGATED_COUNT: u32, used in
+ * the STA mode. Represent the total number of non aggregated frames transmitted
+ * by the STA. This data is maintained per connect session. Represents the count
+ * of last connected session, when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_AGGREGATED_COUNT: u32, used in the
+ * STA mode. Represent the total number of aggregated frames transmitted by the
+ * STA. This data is maintained per connect session. Represents the count of
+ * last connected session, when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_GOOD_PLCP_COUNT: u32, used in
+ * the STA mode. Represents the number of received frames with a good PLCP. This
+ * data is maintained per connect session. Represents the count of last
+ * connected session, when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_INVALID_DELIMITER_COUNT: u32,
+ * used in the STA mode. Represents the number of occasions that no valid
+ * delimiter is detected by A-MPDU parser. This data is maintained per connect
+ * session. Represents the count of last connected session, when queried in the
+ * disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_CRC_FAIL_COUNT: u32, used in the
+ * STA mode. Represents the number of frames for which CRC check failed in the
+ * MAC. This data is maintained per connect session. Represents the count of
+ * last connected session, when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_ACKS_GOOD_FCS_COUNT: u32, used in the
+ * STA mode. Represents the number of unicast ACKs received with good FCS. This
+ * data is maintained per connect session. Represents the count of last
+ * connected session, when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BLOCKACK_COUNT: u32, used in the STA
+ * mode. Represents the number of received Block Acks. This data is maintained
+ * per connect session. Represents the count of last connected session, when
+ * queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BEACON_COUNT: u32, used in the STA
+ * mode. Represents the number of beacons received from the connected BSS. This
+ * data is maintained per connect session. Represents the count of last
+ * connected session, when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_OTHER_BEACON_COUNT: u32, used in the
+ * STA mode. Represents the number of beacons received by the other BSS when in
+ * connected state (through the probes done by the STA). This data is maintained
+ * per connect session. Represents the count of last connected session, when
+ * queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_UCAST_DATA_GOOD_FCS_COUNT: u64, used in
+ * the STA mode. Represents the number of received DATA frames with good FCS and
+ * matching Receiver Address when in connected state. This data is maintained
+ * per connect session. Represents the count of last connected session, when
+ * queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_DATA_BC_MC_DROP_COUNT: u32, used in the
+ * STA mode. Represents the number of RX Data multicast frames dropped by the HW
+ * when in the connected state. This data is maintained per connect session.
+ * Represents the count of last connected session, when queried in the
+ * disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_1MBPS: u32, used in the
+ * STA mode. This represents the target power in dBm for the transmissions done
+ * to the AP in 2.4 GHz at 1 Mbps (DSSS) rate. This data is maintained per
+ * connect session. Represents the count of last connected session, when
+ * queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_6MBPS: u32, used in the
+ * STA mode. This represents the Target power in dBm for transmissions done to
+ * the AP in 2.4 GHz at 6 Mbps (OFDM) rate. This data is maintained per connect
+ * session. Represents the count of last connected session, when queried in the
+ * disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_MCS0: u32, used in the
+ * STA mode. This represents the Target power in dBm for transmissions done to
+ * the AP in 2.4 GHz at MCS0 rate. This data is maintained per connect session.
+ * Represents the count of last connected session, when queried in the
+ * disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_6MBPS: u32, used in the
+ * STA mode. This represents the Target power in dBm for transmissions done to
+ * the AP in 5 GHz at 6 Mbps (OFDM) rate. This data is maintained per connect
+ * session. Represents the count of last connected session, when queried in
+ * the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_MCS0: u32, used in the
+ * STA mode. This represents the Target power in dBm for for transmissions done
+ * to the AP in 5 GHz at MCS0 rate. This data is maintained per connect session.
+ * Represents the count of last connected session, when queried in the
+ * disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_HW_BUFFERS_OVERFLOW_COUNT: u32, used
+ * in the STA mode. This represents the Nested attribute representing the
+ * overflow counts of each receive buffer allocated to the hardware during the
+ * STA's connection. The number of hw buffers might vary for each WLAN
+ * solution and hence this attribute represents the nested array of all such
+ * HW buffer count. This data is maintained per connect session. Represents
+ * the count of last connected session, when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAX_TX_POWER: u32, Max TX power (dBm)
+ * allowed as per the regulatory requirements for the current or last connected
+ * session. Used in the STA mode.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_POWER: u32, Latest TX power
+ * (dBm) used by the station in its latest unicast frame while communicating
+ * to the AP in the connected state. When queried in the disconnected state,
+ * this represents the TX power used by the STA with last AP communication
+ * when in connected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ANI_LEVEL: u32, Adaptive noise immunity
+ * level used to adjust the RX sensitivity. Represents the current ANI level
+ * when queried in the connected state. When queried in the disconnected
+ * state, this corresponds to the latest ANI level at the instance of
+ * disconnection.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_IES: Binary attribute containing
+ * the raw information elements from Beacon frames. Represents the Beacon frames
+ * of the current BSS in the connected state. When queried in the disconnected
+ * state, these IEs correspond to the last connected BSSID.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_PROBE_RESP_IES: Binary attribute
+ * containing the raw information elements from Probe Response frames.
+ * Represents the Probe Response frames of the current BSS in the connected
+ * state. When queried in the disconnected state, these IEs correspond to the
+ * last connected BSSID.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_DRIVER_DISCONNECT_REASON: u32, Driver
+ * disconnect reason for the last disconnection if the disconnection is
+ * triggered from the host driver. The values are referred from
+ * enum qca_disconnect_reason_codes.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BIP_MIC_ERROR_COUNT: u32, used in STA mode
+ * only. This represents the number of group addressed robust management frames
+ * received from this station with an invalid MIC or a missing MME when PMF is
+ * enabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BIP_REPLAY_COUNT: u32, used in STA mode
+ * only. This represents the number of group addressed robust management frames
+ * received from this station with the packet number less than or equal to the
+ * last received packet number when PMF is enabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_MIC_ERROR_COUNT: u32, used in STA
+ * mode only. This represents the number of Beacon frames received from this
+ * station with an invalid MIC or a missing MME when beacon protection is
+ * enabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_REPLAY_COUNT: u32, used in STA mode
+ * only. This represents number of Beacon frames received from this station with
+ * the packet number less than or equal to the last received packet number when
+ * beacon protection is enabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE: u32, used in
+ * STA mode only. The driver uses this attribute to populate the connection
+ * failure reason codes and the values are defined in
+ * enum qca_sta_connect_fail_reason_codes. Userspace applications can send
+ * QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO vendor command after receiving
+ * a connection failure indication from the driver. The driver shall not
+ * include this attribute in response to the
+ * QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO command if there is no connection
+ * failure observed in the last attempted connection.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_RATE: u32, latest TX rate (Kbps)
+ * used by the station in its last TX frame while communicating to the AP in the
+ * connected state. When queried in the disconnected state, this represents the
+ * rate used by the STA in the last TX frame to the AP when it was connected.
+ * This attribute is used for STA mode only.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_RIX: u32, used in STA mode only.
+ * This represents the rate index used by the STA for the last TX frame to the
+ * AP. When queried in the disconnected state, this gives the last RIX used by
+ * the STA in the last TX frame to the AP when it was connected.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TSF_OUT_OF_SYNC_COUNT: u32, used in STA
+ * mode only. This represents the number of times the STA TSF goes out of sync
+ * from the AP after the connection. If queried in the disconnected state, this
+ * gives the count of TSF out of sync for the last connection.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_TRIGGER_REASON: u32, used in STA
+ * mode only. This represents the roam trigger reason for the last roaming
+ * attempted by the firmware. This can be queried either in connected state or
+ * disconnected state. Each bit of this attribute represents the different
+ * roam trigger reason code which are defined in enum qca_vendor_roam_triggers.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON: u32, used in STA mode
+ * only. This represents the roam fail reason for the last failed roaming
+ * attempt by the firmware. Different roam failure reason codes are specified
+ * in enum qca_vendor_roam_fail_reasons. This can be queried either in
+ * connected state or disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON: u32, used in
+ * STA mode only. This represents the roam invoke fail reason for the last
+ * failed roam invoke. Different roam invoke failure reason codes
+ * are specified in enum qca_vendor_roam_invoke_fail_reasons. This can be
+ * queried either in connected state or disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_UPLINK_DELAY: u32, used in STA mode only.
+ * This represents the average congestion duration of uplink frames in MAC
+ * queue in unit of ms. This can be queried either in connected state or
+ * disconnected state.
+ */
+enum qca_wlan_vendor_attr_get_sta_info {
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAC = 1,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_FLAGS = 2,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_GUARD_INTERVAL = 3,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_RETRY_COUNT = 4,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BC_MC_COUNT = 5,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RETRY_SUCCEED = 6,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RETRY_EXHAUSTED = 7,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_TOTAL = 8,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY = 9,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY_EXHAUSTED = 10,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_PROBE_REQ_BMISS_COUNT = 11,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_PROBE_RESP_BMISS_COUNT = 12,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_ALL_COUNT = 13,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_COUNT = 14,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_RETRY_FAIL_COUNT = 15,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_NON_AGGREGATED_COUNT = 16,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_AGGREGATED_COUNT = 17,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_GOOD_PLCP_COUNT = 18,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_INVALID_DELIMITER_COUNT = 19,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_CRC_FAIL_COUNT = 20,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_ACKS_GOOD_FCS_COUNT = 21,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BLOCKACK_COUNT = 22,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BEACON_COUNT = 23,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_OTHER_BEACON_COUNT = 24,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_UCAST_DATA_GOOD_FCS_COUNT = 25,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_DATA_BC_MC_DROP_COUNT = 26,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_1MBPS = 27,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_6MBPS = 28,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_MCS0 = 29,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_6MBPS = 30,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_MCS0 = 31,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_HW_BUFFERS_OVERFLOW_COUNT = 32,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAX_TX_POWER = 33,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_POWER = 34,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ANI_LEVEL = 35,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_IES = 36,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_PROBE_RESP_IES = 37,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_DRIVER_DISCONNECT_REASON = 38,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BIP_MIC_ERROR_COUNT = 39,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BIP_REPLAY_COUNT = 40,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_MIC_ERROR_COUNT = 41,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_REPLAY_COUNT = 42,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE = 43,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_RATE = 44,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_RIX = 45,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TSF_OUT_OF_SYNC_COUNT = 46,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_TRIGGER_REASON = 47,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON = 48,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON = 49,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_UPLINK_DELAY = 50,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAX =
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_update_sta_info - Defines attributes
+ * used by QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_CONNECT_CHANNELS: Type is NLA_UNSPEC.
+ * Used in STA mode. This attribute represents the list of channel center
+ * frequencies in MHz (u32) the station has learnt during the last connection
+ * or roaming attempt. This information shall not signify the channels for
+ * an explicit scan request from the user space. Host drivers can update this
+ * information to the user space in both connected and disconnected state.
+ * In the disconnected state this information shall signify the channels
+ * scanned in the last connection/roam attempt that lead to the disconnection.
+ */
+enum qca_wlan_vendor_attr_update_sta_info {
+ QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_CONNECT_CHANNELS = 1,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_MAX =
+ QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_disconnect_reason_codes - Specifies driver disconnect reason codes.
+ * Used when the driver triggers the STA to disconnect from the AP.
+ *
+ * @QCA_DISCONNECT_REASON_UNSPECIFIED: The host driver triggered the
+ * disconnection with the AP due to unspecified reasons.
+ *
+ * @QCA_DISCONNECT_REASON_INTERNAL_ROAM_FAILURE: The host driver triggered the
+ * disconnection with the AP due to a roaming failure. This roaming is triggered
+ * internally (host driver/firmware).
+ *
+ * @QCA_DISCONNECT_REASON_EXTERNAL_ROAM_FAILURE: The driver disconnected from
+ * the AP when the user/external triggered roaming fails.
+ *
+ * @QCA_DISCONNECT_REASON_GATEWAY_REACHABILITY_FAILURE: This reason code is used
+ * by the host driver whenever gateway reachability failure is detected and the
+ * driver disconnects with AP.
+ *
+ * @QCA_DISCONNECT_REASON_UNSUPPORTED_CHANNEL_CSA: The driver disconnected from
+ * the AP on a channel switch announcement from it with an unsupported channel.
+ *
+ * @QCA_DISCONNECT_REASON_OPER_CHANNEL_DISABLED_INDOOR: On a concurrent AP start
+ * with indoor channels disabled and if the STA is connected on one of these
+ * disabled channels, the host driver disconnected the STA with this reason
+ * code.
+ *
+ * @QCA_DISCONNECT_REASON_OPER_CHANNEL_USER_DISABLED: Disconnection due to an
+ * explicit request from the user to disable the current operating channel.
+ *
+ * @QCA_DISCONNECT_REASON_DEVICE_RECOVERY: STA disconnected from the AP due to
+ * the internal host driver/firmware recovery.
+ *
+ * @QCA_DISCONNECT_REASON_KEY_TIMEOUT: The driver triggered the disconnection on
+ * a timeout for the key installations from the user space.
+ *
+ * @QCA_DISCONNECT_REASON_OPER_CHANNEL_BAND_CHANGE: The dDriver disconnected the
+ * STA on a band change request from the user space to a different band from the
+ * current operation channel/band.
+ *
+ * @QCA_DISCONNECT_REASON_IFACE_DOWN: The STA disconnected from the AP on an
+ * interface down trigger from the user space.
+ *
+ * @QCA_DISCONNECT_REASON_PEER_XRETRY_FAIL: The host driver disconnected the
+ * STA on getting continuous transmission failures for multiple Data frames.
+ *
+ * @QCA_DISCONNECT_REASON_PEER_INACTIVITY: The STA does a keep alive
+ * notification to the AP by transmitting NULL/G-ARP frames. This disconnection
+ * represents inactivity from AP on such transmissions.
+
+ * @QCA_DISCONNECT_REASON_SA_QUERY_TIMEOUT: This reason code is used on
+ * disconnection when SA Query times out (AP does not respond to SA Query).
+ *
+ * @QCA_DISCONNECT_REASON_BEACON_MISS_FAILURE: The host driver disconnected the
+ * STA on missing the beacons continuously from the AP.
+ *
+ * @QCA_DISCONNECT_REASON_CHANNEL_SWITCH_FAILURE: Disconnection due to STA not
+ * able to move to the channel mentioned by the AP in CSA.
+ *
+ * @QCA_DISCONNECT_REASON_USER_TRIGGERED: User triggered disconnection.
+ */
+enum qca_disconnect_reason_codes {
+ QCA_DISCONNECT_REASON_UNSPECIFIED = 0,
+ QCA_DISCONNECT_REASON_INTERNAL_ROAM_FAILURE = 1,
+ QCA_DISCONNECT_REASON_EXTERNAL_ROAM_FAILURE = 2,
+ QCA_DISCONNECT_REASON_GATEWAY_REACHABILITY_FAILURE = 3,
+ QCA_DISCONNECT_REASON_UNSUPPORTED_CHANNEL_CSA = 4,
+ QCA_DISCONNECT_REASON_OPER_CHANNEL_DISABLED_INDOOR = 5,
+ QCA_DISCONNECT_REASON_OPER_CHANNEL_USER_DISABLED = 6,
+ QCA_DISCONNECT_REASON_DEVICE_RECOVERY = 7,
+ QCA_DISCONNECT_REASON_KEY_TIMEOUT = 8,
+ QCA_DISCONNECT_REASON_OPER_CHANNEL_BAND_CHANGE = 9,
+ QCA_DISCONNECT_REASON_IFACE_DOWN = 10,
+ QCA_DISCONNECT_REASON_PEER_XRETRY_FAIL = 11,
+ QCA_DISCONNECT_REASON_PEER_INACTIVITY = 12,
+ QCA_DISCONNECT_REASON_SA_QUERY_TIMEOUT = 13,
+ QCA_DISCONNECT_REASON_BEACON_MISS_FAILURE = 14,
+ QCA_DISCONNECT_REASON_CHANNEL_SWITCH_FAILURE = 15,
+ QCA_DISCONNECT_REASON_USER_TRIGGERED = 16,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_driver_disconnect_reason - Defines attributes
+ * used by %QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASCON_CODE: u32 attribute.
+ * This attribute represents the driver specific reason codes (local
+ * driver/firmware initiated reasons for disconnection) defined
+ * in enum qca_disconnect_reason_codes.
+ */
+enum qca_wlan_vendor_attr_driver_disconnect_reason {
+ QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASCON_CODE = 1,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_MAX =
+ QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_tspec_operation - Operation of the config TSPEC request
+ *
+ * Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_OPERATION.
+ */
+enum qca_wlan_tspec_operation {
+ QCA_WLAN_TSPEC_ADD = 0,
+ QCA_WLAN_TSPEC_DEL = 1,
+ QCA_WLAN_TSPEC_GET = 2,
+};
+
+/**
+ * enum qca_wlan_tspec_direction - Direction in TSPEC
+ * As what is defined in IEEE Std 802.11-2016, Table 9-139.
+ *
+ * Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_DIRECTION.
+ */
+enum qca_wlan_tspec_direction {
+ QCA_WLAN_TSPEC_DIRECTION_UPLINK = 0,
+ QCA_WLAN_TSPEC_DIRECTION_DOWNLINK = 1,
+ QCA_WLAN_TSPEC_DIRECTION_DIRECT = 2,
+ QCA_WLAN_TSPEC_DIRECTION_BOTH = 3,
+};
+
+/**
+ * enum qca_wlan_tspec_ack_policy - MAC acknowledgement policy in TSPEC
+ * As what is defined in IEEE Std 802.11-2016, Table 9-141.
+ *
+ * Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_ACK_POLICY.
+ */
+enum qca_wlan_tspec_ack_policy {
+ QCA_WLAN_TSPEC_NORMAL_ACK = 0,
+ QCA_WLAN_TSPEC_NO_ACK = 1,
+ /* Reserved */
+ QCA_WLAN_TSPEC_BLOCK_ACK = 3,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_config_tspec - Defines attributes
+ * used by %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_OPERATION:
+ * u8 attribute. Specify the TSPEC operation of this request. Possible values
+ * are defined in enum qca_wlan_tspec_operation.
+ * Mandatory attribute for all kinds of config TSPEC requests.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_TSID:
+ * u8 attribute. TS ID. Possible values are 0-7.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD, QCA_WLAN_TSPEC_DEL,
+ * QCA_WLAN_TSPEC_GET. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_DIRECTION:
+ * u8 attribute. Direction of data carried by the TS. Possible values are
+ * defined in enum qca_wlan_tspec_direction.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_APSD:
+ * Flag attribute. Indicate whether APSD is enabled for the traffic associated
+ * with the TS. set - enabled, not set - disabled.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_USER_PRIORITY:
+ * u8 attribute. User priority to be used for the transport of MSDUs/A-MSDUs
+ * belonging to this TS. Possible values are 0-7.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_ACK_POLICY:
+ * u8 attribute. Indicate whether MAC acknowledgements are required for
+ * MPDUs/A-MSDUs belonging to this TS and the form of those acknowledgements.
+ * Possible values are defined in enum qca_wlan_tspec_ack_policy.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_NOMINAL_MSDU_SIZE:
+ * u16 attribute. Specify the nominal size in bytes of MSDUs/A-MSDUs
+ * belonging to this TS.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAXIMUM_MSDU_SIZE:
+ * u16 attribute. Specify the maximum size in bytes of MSDUs/A-MSDUs
+ * belonging to this TS.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MIN_SERVICE_INTERVAL:
+ * u32 attribute. Specify the minimum interval in microseconds between the
+ * start of two successive SPs.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAX_SERVICE_INTERVAL:
+ * u32 attribute. Specify the maximum interval in microseconds between the
+ * start of two successive SPs.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_INACTIVITY_INTERVAL:
+ * u32 attribute. Specify the minimum interval in microseconds that can elapse
+ * without arrival or transfer of an MPDU belonging to the TS before this TS
+ * is deleted by the MAC entity at the HC.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_SUSPENSION_INTERVAL:
+ * u32 attribute. Specify the minimum interval in microseconds that can elapse
+ * without arrival or transfer of an MSDU belonging to the TS before the
+ * generation of successive QoS(+)CF-Poll is stopped for this TS. A value of
+ * 0xFFFFFFFF disables the suspension interval. The value of the suspension
+ * interval is always less than or equal to the inactivity interval.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MINIMUM_DATA_RATE:
+ * u32 attribute. Indicate the lowest data rate in bps specified at the MAC
+ * SAP for transport of MSDUs or A-MSDUs belonging to this TS within the
+ * bounds of this TSPEC.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MEAN_DATA_RATE:
+ * u32 attribute. Indicate the average data rate in bps specified at the MAC
+ * SAP for transport of MSDUs or A-MSDUs belonging to this TS within the
+ * bounds of this TSPEC.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_PEAK_DATA_RATE:
+ * u32 attribute. Indicate the maximum allowable data rate in bps specified at
+ * the MAC SAP for transport of MSDUs or A-MSDUs belonging to this TS within
+ * the bounds of this TSPEC.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_BURST_SIZE:
+ * u32 attribute. Specify the maximum burst size in bytes of the MSDUs/A-MSDUs
+ * belonging to this TS that arrive at the MAC SAP at the peak data rate. A
+ * value of 0 indicates that there are no bursts.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MINIMUM_PHY_RATE:
+ * u32 attribute. Indicate the minimum PHY rate in bps for transport of
+ * MSDUs/A-MSDUs belonging to this TS within the bounds of this TSPEC.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_SURPLUS_BANDWIDTH_ALLOWANCE:
+ * u16 attribute. Specify the excess allocation of time (and bandwidth) over
+ * and above the stated application rates required to transport an MSDU/A-MSDU
+ * belonging to the TS in this TSPEC.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ */
+enum qca_wlan_vendor_attr_config_tspec {
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_OPERATION = 1,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_TSID = 2,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_DIRECTION = 3,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_APSD = 4,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_USER_PRIORITY = 5,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_ACK_POLICY = 6,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_NOMINAL_MSDU_SIZE = 7,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAXIMUM_MSDU_SIZE = 8,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MIN_SERVICE_INTERVAL = 9,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAX_SERVICE_INTERVAL = 10,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_INACTIVITY_INTERVAL = 11,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_SUSPENSION_INTERVAL = 12,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MINIMUM_DATA_RATE = 13,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MEAN_DATA_RATE = 14,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_PEAK_DATA_RATE = 15,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_BURST_SIZE = 16,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MINIMUM_PHY_RATE = 17,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_SURPLUS_BANDWIDTH_ALLOWANCE = 18,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAX =
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_oci_override_frame_type - OCI override frame type
+ * @QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_SA_QUERY_REQ: SA Query Request frame
+ * @QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_SA_QUERY_RESP: SA Query Response frame
+ * @QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_FT_REASSOC_REQ: FT Reassociation Request
+ * frame
+ * @QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_FILS_REASSOC_REQ: FILS Reassociation
+ * Request frame.
+ */
+enum qca_wlan_vendor_oci_override_frame_type {
+ QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_SA_QUERY_REQ = 1,
+ QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_SA_QUERY_RESP = 2,
+ QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_FT_REASSOC_REQ = 3,
+ QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_FILS_REASSOC_REQ = 4,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_oci_override: Represents attributes for
+ * OCI override request. These attributes are used inside nested attribute
+ * %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OCI_OVERRIDE in QCA vendor command
+ * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_FRAME_TYPE: Required attribute, u8.
+ * Values from enum qca_wlan_vendor_oci_override_frame_type used in this
+ * attribute to specify the frame type in which the OCI is to be overridden.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_FREQUENCY: Required (u32)
+ * OCI frequency (in MHz) to override in the specified frame type.
+ */
+enum qca_wlan_vendor_attr_oci_override {
+ QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_FRAME_TYPE = 1,
+ QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_FREQUENCY = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_MAX =
+ QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_medium_assess_type - Type of medium assess request
+ *
+ * Values for %QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_TYPE.
+ */
+enum qca_wlan_medium_assess_type {
+ QCA_WLAN_MEDIUM_ASSESS_CCA = 0,
+ QCA_WLAN_MEDIUM_ASSESS_CONGESTION_REPORT = 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_medium_assess - Attributes used by
+ * %QCA_NL80211_VENDOR_SUBCMD_MEDIUM_ASSESS vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_TYPE:
+ * u8 attribute. Mandatory in all kinds of medium assess requests/responses.
+ * Specify the type of medium assess request and indicate its type in response.
+ * Possible values are defined in enum qca_wlan_medium_assess_type.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_PERIOD:
+ * u32 attribute. Mandatory in CCA request.
+ * Specify the assessment period in terms of seconds. Assessment result will be
+ * sent as the response to the CCA request after the assessment period.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_TOTAL_CYCLE_COUNT:
+ * u32 attribute. Mandatory in response to CCA request.
+ * Total timer tick count of the assessment cycle.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_IDLE_COUNT:
+ * u32 attribute. Mandatory in response to CCA request.
+ * Timer tick count of idle time in the assessment cycle.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_IBSS_RX_COUNT:
+ * u32 attribute. Mandatory in response to CCA request.
+ * Timer tick count of Intra BSS traffic RX time in the assessment cycle.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_OBSS_RX_COUNT:
+ * u32 attribute. Mandatory in response to CCA request.
+ * Timer tick count of Overlapping BSS traffic RX time in the assessment cycle.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_MAX_IBSS_RSSI:
+ * s32 attribute. Mandatory in response to CCA request.
+ * Maximum RSSI of Intra BSS traffic in the assessment cycle.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_MIN_IBSS_RSSI:
+ * s32 attribute. Mandatory in response to CCA request.
+ * Minimum RSSI of Intra BSS traffic in the assessment cycle.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_ENABLE:
+ * u8 attribute. Mandatory in congestion report request.
+ * 1-enable 0-disable.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_THRESHOLD:
+ * u8 attribute. Mandatory in congestion report enable request and will be
+ * ignored if present in congestion report disable request. Possible values are
+ * 0-100. A vendor event QCA_NL80211_VENDOR_SUBCMD_MEDIUM_ASSESS with the type
+ * QCA_WLAN_MEDIUM_ASSESS_CONGESTION_REPORT will be sent to userspace if
+ * congestion percentage reaches the configured threshold.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_INTERVAL:
+ * u8 attribute. Optional in congestion report enable request and will be
+ * ignored if present in congestion report disable request.
+ * Specify the interval of congestion report event in terms of seconds. Possible
+ * values are 1-255. Default value 1 will be used if this attribute is omitted
+ * or using invalid values.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_PERCENTAGE:
+ * u8 attribute. Mandatory in congestion report event.
+ * Indicate the actual congestion percentage. Possible values are 0-100.
+ */
+enum qca_wlan_vendor_attr_medium_assess {
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_TYPE = 1,
+
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_PERIOD = 2,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_TOTAL_CYCLE_COUNT = 3,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_IDLE_COUNT = 4,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_IBSS_RX_COUNT = 5,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_OBSS_RX_COUNT = 6,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_MAX_IBSS_RSSI = 7,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_MIN_IBSS_RSSI = 8,
+
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_ENABLE = 9,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_THRESHOLD = 10,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_INTERVAL = 11,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_PERCENTAGE = 12,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_MAX =
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_mbssid_tx_vdev_status - Defines attributes
+ * used by QCA_NL80211_VENDOR_SUBCMD_MBSSID_TX_VDEV_STATUS vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_VAL:
+ * u8 attribute. Notify the TX VDEV status. Possible values 0, 1
+ * belonging to MBSSID/EMA_AP configuration. 0 means Non-Tx VDEV,
+ * 1 means Tx VDEV. Mandatory attribute for all MBSSID VDEV status events.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_EVENT:
+ * u8 attribute, required. 1 means Tx VDEV up event. 0 means Tx VDEV down event.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_ID:
+ * u8 attribute, required. Indicates group id of Tx VDEV.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO:
+ * Nested attribute. This attribute shall be used by the driver to send
+ * group information. The attributes defined in enum
+ * qca_wlan_vendor_attr_mbssid_tx_vdev_group_info
+ * are nested in this attribute.
+ */
+enum qca_wlan_vendor_attr_mbssid_tx_vdev_status {
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_VAL = 1,
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_EVENT = 2,
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_ID = 3,
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO = 4,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_MAX =
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_mbssid_tx_vdev_group_info - Attributes used
+ * inside %QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO nested attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO_IF_INDEX:
+ * u32 attribute, required. Contains interface index.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO_STATUS:
+ * u8 attribute, required. 0 - means vdev is in down state.
+ * 1 - means vdev is in up state.
+ */
+enum qca_wlan_vendor_attr_mbssid_tx_vdev_group_info {
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO_IF_INDEX = 1,
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO_STATUS = 2,
+
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO_MAX =
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO - 1,
+};
+
+/**
+ * enum qca_wlan_concurrent_sta_policy_config - Concurrent STA policies
+ *
+ * @QCA_WLAN_CONCURRENT_STA_POLICY_PREFER_PRIMARY: Preference to the primary
+ * STA interface has to be given while selecting the connection policies
+ * (e.g., BSSID, band, TX/RX chains, etc.) for the subsequent STA interface.
+ * An interface is set as primary through the attribute
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_CONCURRENT_STA_PRIMARY. This policy is not
+ * applicable if the primary interface has not been set earlier.
+ *
+ * The intention is not to downgrade the primary STA performance, such as:
+ * - Do not reduce the number of TX/RX chains of primary connection.
+ * - Do not optimize DBS vs. MCC/SCC, if DBS ends up reducing the number of
+ * chains.
+ * - If using MCC, should set the MCC duty cycle of the primary connection to
+ * be higher than the secondary connection.
+ *
+ * @QCA_WLAN_CONCURRENT_STA_POLICY_UNBIASED: The connection policies for the
+ * subsequent STA connection shall be chosen to balance with the existing
+ * concurrent STA's performance.
+ * Such as
+ * - Can choose MCC or DBS mode depending on the MCC efficiency and hardware
+ * capability.
+ * - If using MCC, set the MCC duty cycle of the primary connection to be equal
+ * to the secondary.
+ * - Prefer BSSID candidates which will help provide the best "overall"
+ * performance for all the STA connections.
+ */
+enum qca_wlan_concurrent_sta_policy_config {
+ QCA_WLAN_CONCURRENT_STA_POLICY_PREFER_PRIMARY = 0,
+ QCA_WLAN_CONCURRENT_STA_POLICY_UNBIASED = 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_concurrent_sta_policy - Defines attributes
+ * used by QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_MULTI_STA_POLICY vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONCURRENT_STA_POLICY_CONFIG:
+ * u8 attribute. Configures the concurrent STA policy configuration.
+ * Possible values are defined in enum qca_wlan_concurrent_sta_policy_config.
+ */
+enum qca_wlan_vendor_attr_concurrent_sta_policy {
+ QCA_WLAN_VENDOR_ATTR_CONCURRENT_STA_POLICY_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_CONCURRENT_STA_POLICY_CONFIG = 1,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_CONCURRENT_STA_POLICY_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_CONCURRENT_STA_POLICY_MAX =
+ QCA_WLAN_VENDOR_ATTR_CONCURRENT_STA_POLICY_AFTER_LAST - 1,
+
+};
+
+/**
+ * enum qca_sta_connect_fail_reason_codes - Defines values carried
+ * by QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE vendor
+ * attribute.
+ * @QCA_STA_CONNECT_FAIL_REASON_NO_BSS_FOUND: No Probe Response frame received
+ * for unicast Probe Request frame.
+ * @QCA_STA_CONNECT_FAIL_REASON_AUTH_TX_FAIL: STA failed to send auth request.
+ * @QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_ACK_RECEIVED: AP didn't send ACK for
+ * auth request.
+ * @QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_RESP_RECEIVED: Auth response is not
+ * received from AP.
+ * @QCA_STA_CONNECT_FAIL_REASON_ASSOC_REQ_TX_FAIL: STA failed to send
+ * Association Request frame.
+ * @QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_ACK_RECEIVED: AP didn't send ACK for
+ * Association Request frame.
+ * @QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_RESP_RECEIVED: Association Response
+ * frame is not received from AP.
+ */
+enum qca_sta_connect_fail_reason_codes {
+ QCA_STA_CONNECT_FAIL_REASON_NO_BSS_FOUND = 1,
+ QCA_STA_CONNECT_FAIL_REASON_AUTH_TX_FAIL = 2,
+ QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_ACK_RECEIVED = 3,
+ QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_RESP_RECEIVED = 4,
+ QCA_STA_CONNECT_FAIL_REASON_ASSOC_REQ_TX_FAIL = 5,
+ QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_ACK_RECEIVED = 6,
+ QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_RESP_RECEIVED = 7,
+};
+
+/**
+ * enum qca_wlan_vendor_usable_channels_filter - Bitmask of different
+ * filters defined in this enum are used in attribute
+ * %QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_FILTER_MASK.
+ *
+ * @QCA_WLAN_VENDOR_FILTER_CELLULAR_COEX: When this bit is set, the driver
+ * shall filter the channels which are not usable because of coexistence with
+ * cellular radio.
+ * @QCA_WLAN_VENDOR_FILTER_WLAN_CONCURRENCY: When this bit is set, the driver
+ * shall filter the channels which are not usable because of existing active
+ * interfaces in the driver and will result in Multi Channel Concurrency, etc.
+ *
+ */
+enum qca_wlan_vendor_usable_channels_filter {
+ QCA_WLAN_VENDOR_FILTER_CELLULAR_COEX = 0,
+ QCA_WLAN_VENDOR_FILTER_WLAN_CONCURRENCY = 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_chan_info - Attributes used inside
+ * %QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_CHAN_INFO nested attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CHAN_INFO_PRIMARY_FREQ:
+ * u32 attribute, required. Indicates the center frequency of the primary
+ * channel in MHz.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CHAN_INFO_SEG0_FREQ:
+ * u32 attribute. Indicates the center frequency of the primary segment of the
+ * channel in MHz. This attribute is required when reporting 40 MHz, 80 MHz,
+ * 160 MHz, and 320 MHz channels.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CHAN_INFO_SEG1_FREQ:
+ * u32 attribute. Indicates the center frequency of the secondary segment of
+ * 80+80 channel in MHz. This attribute is required only when
+ * QCA_WLAN_VENDOR_ATTR_CHAN_INFO_BANDWIDTH is set to NL80211_CHAN_WIDTH_80P80.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CHAN_INFO_BANDWIDTH:
+ * u32 attribute, required. Indicates the bandwidth of the channel, possible
+ * values are defined in enum nl80211_chan_width.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CHAN_INFO_IFACE_MODE_MASK:
+ * u32 attribute, required. Indicates all the interface types for which this
+ * channel is usable. This attribute encapsulates bitmasks of interface types
+ * defined in enum nl80211_iftype.
+ *
+ */
+enum qca_wlan_vendor_attr_chan_info {
+ QCA_WLAN_VENDOR_ATTR_CHAN_INFO_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_CHAN_INFO_PRIMARY_FREQ = 1,
+ QCA_WLAN_VENDOR_ATTR_CHAN_INFO_SEG0_FREQ = 2,
+ QCA_WLAN_VENDOR_ATTR_CHAN_INFO_SEG1_FREQ = 3,
+ QCA_WLAN_VENDOR_ATTR_CHAN_INFO_BANDWIDTH = 4,
+ QCA_WLAN_VENDOR_ATTR_CHAN_INFO_IFACE_MODE_MASK = 5,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_CHAN_INFO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_CHAN_INFO_MAX =
+ QCA_WLAN_VENDOR_ATTR_CHAN_INFO_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_usable_channels - Attributes used by
+ * %QCA_NL80211_VENDOR_SUBCMD_USABLE_CHANNELS vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_BAND_MASK:
+ * u32 attribute. Indicates the bands from which the channels should be reported
+ * in response. This attribute encapsulates bit masks of bands defined in enum
+ * nl80211_band. Optional attribute, if not present in the request the driver
+ * shall return channels from all supported bands.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_IFACE_MODE_MASK:
+ * u32 attribute. Indicates all the interface types for which the usable
+ * channels information is requested. This attribute encapsulates bitmasks of
+ * interface types defined in enum nl80211_iftype. Optional attribute, if not
+ * present in the request the driver shall send information of all supported
+ * interface modes.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_FILTER_MASK:
+ * u32 attribute. This attribute carries information of all filters that shall
+ * be applied while populating usable channels information by the driver. This
+ * attribute carries bit masks of different filters defined in enum
+ * qca_wlan_vendor_usable_channels_filter. Optional attribute, if not present
+ * in the request the driver shall send information of channels without applying
+ * any of the filters that can be configured through this attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_CHAN_INFO:
+ * Nested attribute. This attribute shall be used by the driver to send
+ * usability information of each channel. The attributes defined in enum
+ * qca_wlan_vendor_attr_chan_info are used inside this attribute.
+ */
+enum qca_wlan_vendor_attr_usable_channels {
+ QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_BAND_MASK = 1,
+ QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_IFACE_MODE_MASK = 2,
+ QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_FILTER_MASK = 3,
+ QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_CHAN_INFO = 4,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_MAX =
+ QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_radar_history: Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_GET_RADAR_HISTORY to get DFS radar history.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_ENTRIES: Nested attribute to carry
+ * the list of radar history entries.
+ * Each entry contains freq, timestamp, and radar signal detect flag.
+ * The driver shall add an entry when CAC has finished, or radar signal
+ * has been detected post AP beaconing. The driver shall maintain at least
+ * 8 entries in order to save CAC result for a 160 MHz channel.
+ * @QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_FREQ: u32 attribute.
+ * Channel frequency in MHz.
+ * @QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_TIMESTAMP: u64 nanoseconds.
+ * CLOCK_BOOTTIME timestamp when this entry is updated due to CAC
+ * or radar detection.
+ * @QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_DETECTED: NLA_FLAG attribute.
+ * This flag indicates radar signal has been detected.
+ */
+enum qca_wlan_vendor_attr_radar_history {
+ QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_INVALID = 0,
+
+ QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_ENTRIES = 1,
+ QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_FREQ = 2,
+ QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_TIMESTAMP = 3,
+ QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_DETECTED = 4,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_LAST,
+ QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_MAX =
+ QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_mdns_offload - Attributes used by
+ * %QCA_NL80211_VENDOR_SUBCMD_MDNS_OFFLOAD vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ENABLE: Required (flag)
+ * Enable mDNS offload. This attribute is mandatory to enable
+ * mDNS offload feature. If this attribute is not present, mDNS offload
+ * is disabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_TABLE: Nested attribute containing
+ * one or more %QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ENTRY attributes. This
+ * attribute is mandatory when enabling the feature, and not required when
+ * disabling the feature.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ENTRY: Nested attribute containing
+ * the following attributes:
+ * %QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_FQDN
+ * %QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ANSWER_RESOURCE_RECORDS_COUNT
+ * %QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ANSWER_PAYLOAD
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_FQDN: Required string attribute.
+ * It consists of a hostname and ".local" as the domain name. The character
+ * set is limited to UTF-8 encoding. The maximum allowed size is 63 bytes.
+ * It is used to compare the domain in the "QU" query. Only 1 FQDN is
+ * supported per vdev.
+ * For example: myphone.local
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ANSWER_RESOURCE_RECORDS_COUNT: Required
+ * u16 attribute. It specifies the total number of resource records present
+ * in the answer section of the answer payload. This attribute is needed by the
+ * firmware to populate the mDNS response frame for mDNS queries without having
+ * to parse the answer payload.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ANSWER_PAYLOAD: Required binary blob
+ * attribute sent by the mdnsResponder from userspace. It contains resource
+ * records of various types (e.g., A, AAAA, PTR, TXT) and service list. This
+ * payload is passed down to the firmware and is transmitted in response to
+ * mDNS queries.
+ * The maximum supported size of the answer payload is 512 bytes.
+ */
+enum qca_wlan_vendor_attr_mdns_offload {
+ QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ENABLE = 1,
+ QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_TABLE = 2,
+ QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ENTRY = 3,
+ QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_FQDN = 4,
+ QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ANSWER_RESOURCE_RECORDS_COUNT = 5,
+ QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ANSWER_PAYLOAD = 6,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_MAX =
+ QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_AFTER_LAST - 1,
+};
+
+/**
+ * qca_wlan_vendor_monitor_data_frame_type - Represent the various
+ * Data frame types to be sent over the monitor interface.
+ */
+enum qca_wlan_vendor_monitor_data_frame_type {
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_ALL = BIT(0),
+ /* valid only if QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_ALL is not set
+ */
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_ARP = BIT(1),
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_DHCPV4 = BIT(2),
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_DHCPV6 = BIT(3),
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_EAPOL = BIT(4),
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_DNSV4 = BIT(5),
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_DNSV6 = BIT(6),
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_TCP_SYN = BIT(7),
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_TCP_SYNACK = BIT(8),
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_TCP_FIN = BIT(9),
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_TCP_FINACK = BIT(10),
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_TCP_ACK = BIT(11),
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_TCP_RST = BIT(12),
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_ICMPV4 = BIT(13),
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_ICMPV6 = BIT(14),
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_RTP = BIT(15),
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_SIP = BIT(16),
+ QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_QOS_NULL = BIT(17),
+};
+
+/**
+ * qca_wlan_vendor_monitor_mgmt_frame_type - Represent the various
+ * Management frame types to be sent over the monitor interface.
+ * @QCA_WLAN_VENDOR_MONITOR_MGMT_FRAME_TYPE_ALL: All the Management Frames.
+ * @QCA_WLAN_VENDOR_MONITOR_MGMT_CONNECT_NO_BEACON: All the Management frames
+ * except the Beacon frame.
+ * @QCA_WLAN_VENDOR_MONITOR_MGMT_CONNECT_BEACON: Only the connected
+ * BSSID Beacon frames. Valid only in the connected state.
+ * @QCA_WLAN_VENDOR_MONITOR_MGMT_CONNECT_SCAN_BEACON: Represents
+ * the Beacon frames obtained during the scan (off channel and connected
+ * channel), when in connected state.
+ */
+
+enum qca_wlan_vendor_monitor_mgmt_frame_type {
+ QCA_WLAN_VENDOR_MONITOR_MGMT_FRAME_TYPE_ALL = BIT(0),
+ /* valid only if QCA_WLAN_VENDOR_MONITOR_MGMT_FRAME_TYPE_ALL is not set
+ */
+ QCA_WLAN_VENDOR_MONITOR_MGMT_NO_BEACON = BIT(1),
+ QCA_WLAN_VENDOR_MONITOR_MGMT_CONNECT_BEACON = BIT(2),
+ QCA_WLAN_VENDOR_MONITOR_MGMT_CONNECT_SCAN_BEACON = BIT(3),
+};
+
+/**
+ * qca_wlan_vendor_monitor_ctrl_frame_type - Represent the various
+ * Control frame types to be sent over the monitor interface.
+ * @QCA_WLAN_VENDOR_MONITOR_CTRL_FRAME_TYPE_ALL: All the Control frames
+ * @QCA_WLAN_VENDOR_MONITOR_CTRL_TRIGGER_FRAME: Trigger frame
+ */
+enum qca_wlan_vendor_monitor_ctrl_frame_type {
+ QCA_WLAN_VENDOR_MONITOR_CTRL_FRAME_TYPE_ALL = BIT(0),
+ /* valid only if QCA_WLAN_VENDOR_MONITOR_CTRL_FRAME_TYPE_ALL is not set
+ */
+ QCA_WLAN_VENDOR_MONITOR_CTRL_TRIGGER_FRAME = BIT(1),
+};
+
+/**
+ * enum qca_wlan_vendor_attr_set_monitor_mode - Used by the
+ * vendor command QCA_NL80211_VENDOR_SUBCMD_SET_MONITOR_MODE to set the
+ * monitor mode.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_DATA_TX_FRAME_TYPE: u32 attribute.
+ * Represents the TX Data frame types to be monitored (u32). These Data frames
+ * are represented by enum qca_wlan_vendor_monitor_data_frame_type.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_DATA_RX_FRAME_TYPE: u32 attribute.
+ * Represents the RX Data frame types to be monitored (u32). These Data frames
+ * are represented by enum qca_wlan_vendor_monitor_data_frame_type.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_MGMT_TX_FRAME_TYPE: u32 attribute.
+ * Represents the TX Management frame types to be monitored (u32). These
+ * Management frames are represented by
+ * enum qca_wlan_vendor_monitor_mgmt_frame_type.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_MGMT_RX_FRAME_TYPE: u32 attribute.
+ * Represents the RX Management frame types to be monitored (u32). These
+ * Management frames are represented by
+ * enum qca_wlan_vendor_monitor_mgmt_frame_type.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_CTRL_TX_FRAME_TYPE: u32 attribute.
+ * Represents the TX Control frame types to be monitored (u32). These Control
+ * frames are represented by enum qca_wlan_vendor_monitor_ctrl_frame_type.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_CTRL_RX_FRAME_TYPE: u32 attribute.
+ * Represents the RX Control frame types to be monitored (u32). These Control
+ * frames are represented by enum qca_wlan_vendor_monitor_ctrl_frame_type.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_CONNECTED_BEACON_INTERVAL: u32
+ * attribute.
+ * Represents the interval in milliseconds only for the connected Beacon frames,
+ * expecting the connected BSS's Beacon frames to be sent on the monitor
+ * interface at this specific interval.
+ */
+enum qca_wlan_vendor_attr_set_monitor_mode
+{
+ QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_DATA_TX_FRAME_TYPE = 1,
+ QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_DATA_RX_FRAME_TYPE = 2,
+ QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_MGMT_TX_FRAME_TYPE = 3,
+ QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_MGMT_RX_FRAME_TYPE = 4,
+ QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_CTRL_TX_FRAME_TYPE = 5,
+ QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_CTRL_RX_FRAME_TYPE = 6,
+ QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_CONNECTED_BEACON_INTERVAL = 7,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_MAX =
+ QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_roam_scan_state - Roam scan state flags.
+ * Bits will be set to 1 if the corresponding state is enabled.
+ *
+ * @QCA_VENDOR_WLAN_ROAM_SCAN_STATE_START: Scan Start.
+ * @QCA_VENDOR_WLAN_ROAM_SCAN_STATE_END: Scan end.
+ */
+enum qca_wlan_vendor_roam_scan_state {
+ QCA_WLAN_VENDOR_ROAM_SCAN_STATE_START = BIT(0),
+ QCA_WLAN_VENDOR_ROAM_SCAN_STATE_END = BIT(1),
+};
+
+/**
+ * enum qca_wlan_vendor_roam_event_type - Roam event type flags.
+ * Bits will be set to 1 if the corresponding event is notified.
+ *
+ * @QCA_WLAN_VENDOR_ROAM_EVENT_TRIGGER_REASON: Represents that the roam event
+ * carries the trigger reason. When set, it is expected that the roam event
+ * carries the respective reason via the attribute
+ * QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_TRIGGER_REASON. This event also carries
+ * the BSSID, RSSI, frequency info of the AP to which the roam is attempted.
+ *
+ * @QCA_WLAN_VENDOR_ROAM_EVENT_FAIL_REASON: Represents that the roam event
+ * carries the roam fail reason. When set, it is expected that the roam event
+ * carries the respective reason via the attribute
+ * QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_FAIL_REASON. This event also carries the
+ * BSSID, RSSI, frequency info of the AP to which the roam was attempted.
+ *
+ * @QCA_WLAN_VENDOR_ROAM_EVENT_INVOKE_FAIL_REASON: Represents that the roam
+ * event carries the roam invoke fail reason. When set, it is expected that
+ * the roam event carries the respective reason via the attribute
+ * QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_INVOKE_FAIL_REASON.
+ *
+ * @QCA_WLAN_VENDOR_ROAM_EVENT_SCAN_STATE: Represents that the roam event
+ * carries the roam scan state. When set, it is expected that the roam event
+ * carries the respective scan state via the attribute
+ * QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_ROAM_SCAN_STATE and the corresponding
+ * frequency info via QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_ROAM_SCAN_FREQ_LIST.
+ */
+enum qca_wlan_vendor_roam_event_type {
+ QCA_WLAN_VENDOR_ROAM_EVENT_TRIGGER_REASON = BIT(0),
+ QCA_WLAN_VENDOR_ROAM_EVENT_FAIL_REASON = BIT(1),
+ QCA_WLAN_VENDOR_ROAM_EVENT_INVOKE_FAIL_REASON = BIT(2),
+ QCA_WLAN_VENDOR_ROAM_EVENT_ROAM_SCAN_STATE = BIT(3),
+};
+
+/**
+ * enum qca_wlan_vendor_attr_roam_events_candidate_info: Roam candidate info.
+ * Referred by QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_BSSID: 6-byte MAC address
+ * representing the BSSID of the AP to which the roam is attempted.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_RSSI: Signed 32-bit value
+ * in dBm, signifying the RSSI of the candidate BSSID to which the Roaming is
+ * attempted.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_FREQ: u32, frequency in MHz
+ * on which the roam is attempted.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_FAIL_REASON: u32, used in
+ * STA mode only. This represents the roam fail reason for the last failed
+ * roaming attempt by the firmware for the specific BSSID. Different roam
+ * failure reason codes are specified in enum qca_vendor_roam_fail_reasons.
+ */
+enum qca_wlan_vendor_attr_roam_events_candidate_info {
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_BSSID = 1,
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_RSSI = 2,
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_FREQ = 3,
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_FAIL_REASON = 4,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_MAX =
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_roam_events - Used by the
+ * vendor command QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS to either configure the
+ * roam events to the driver or notify these events from the driver.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CONFIGURE: u8 attribute. Configures the
+ * driver/firmware to enable/disable the notification of roam events. It's a
+ * mandatory attribute and used only in the request from the userspace to the
+ * host driver. 1-Enable, 0-Disable.
+ * If the roaming is totally offloaded to the firmware, this request when
+ * enabled shall mandate the firmware to notify all the relevant roam events
+ * represented by the below attributes. If the host is in the suspend mode,
+ * the behavior of the firmware to notify these events is guided by
+ * QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_DEVICE_STATE, and if the request is to get
+ * these events in the suspend state, the firmware is expected to wake up the
+ * host before the respective events are notified. Please note that such a
+ * request to get the events in the suspend state will have a definite power
+ * implication.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_SUSPEND_STATE: flag attribute. Represents
+ * that the roam events need to be notified in the suspend state too. By
+ * default, these roam events are notified in the resume state. With this flag,
+ * the roam events are notified in both resume and suspend states.
+ * This attribute is used in the request from the userspace to the host driver.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_TYPE: u32, used in STA mode only.
+ * Represents the different roam event types, signified by the enum
+ * qca_wlan_vendor_roam_event_type.
+ * Each bit of this attribute represents the different roam even types reported
+ * through QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS.
+ * This is sent as an event through QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_TRIGGER_REASON: u32, used in STA
+ * mode only. This represents the roam trigger reason for the last roaming
+ * attempted by the firmware. Each bit of this attribute represents the
+ * different roam trigger reason code which are defined in enum
+ * qca_vendor_roam_triggers.
+ * This is sent as an event through QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_INVOKE_FAIL_REASON: u32, used in
+ * STA mode only. This represents the roam invoke fail reason for the last
+ * failed roam invoke. Different roam invoke failure reason codes
+ * are specified in enum qca_vendor_roam_invoke_fail_reasons.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO: Array of candidates info
+ * for which the roam is attempted. Each entry is a nested attribute defined
+ * by enum qca_wlan_vendor_attr_roam_events_candidate_info.
+ * This is sent as an event through QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_ROAM_SCAN_STATE: u8 attribute. Represents
+ * the scan state on which the roam events need to be notified. The values for
+ * this attribute are referred from enum qca_wlan_vendor_roam_scan_state.
+ * This is sent as an event through QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_ROAM_SCAN_FREQ_LIST: Nested attribute of
+ * u32 values. List of frequencies in MHz considered for a roam scan.
+ * This is sent as an event through QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS.
+ */
+
+enum qca_wlan_vendor_attr_roam_events
+{
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CONFIGURE = 1,
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_SUSPEND_STATE = 2,
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_TYPE = 3,
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_TRIGGER_REASON = 4,
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_INVOKE_FAIL_REASON = 5,
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO = 6,
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_ROAM_SCAN_STATE = 7,
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_ROAM_SCAN_FREQ_LIST = 8,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_MAX =
+ QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_AFTER_LAST -1,
+};
+
+#endif /* QCA_VENDOR_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/sae.h b/ap/app/wpa_supplicant-2.10/src/common/sae.h
new file mode 100755
index 0000000..93fc5fb
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/sae.h
@@ -0,0 +1,172 @@
+/*
+ * Simultaneous authentication of equals
+ * Copyright (c) 2012-2013, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef SAE_H
+#define SAE_H
+
+#define SAE_KCK_LEN 32
+#define SAE_PMK_LEN 32
+#define SAE_PMKID_LEN 16
+#define SAE_MAX_PRIME_LEN 512
+#define SAE_MAX_ECC_PRIME_LEN 66
+#define SAE_MAX_HASH_LEN 64
+#define SAE_COMMIT_MAX_LEN (2 + 3 * SAE_MAX_PRIME_LEN + 255)
+#ifdef CONFIG_SAE_PK
+#define SAE_CONFIRM_MAX_LEN ((2 + SAE_MAX_HASH_LEN) + 1500)
+#else /* CONFIG_SAE_PK */
+#define SAE_CONFIRM_MAX_LEN (2 + SAE_MAX_HASH_LEN)
+#endif /* CONFIG_SAE_PK */
+#define SAE_PK_M_LEN 16
+
+/* Special value returned by sae_parse_commit() */
+#define SAE_SILENTLY_DISCARD 65535
+
+struct sae_pk {
+ struct wpabuf *m;
+ struct crypto_ec_key *key;
+ int group;
+ struct wpabuf *pubkey; /* DER encoded subjectPublicKey */
+#ifdef CONFIG_TESTING_OPTIONS
+ struct crypto_ec_key *sign_key_override;
+#endif /* CONFIG_TESTING_OPTIONS */
+};
+
+
+struct sae_temporary_data {
+ u8 kck[SAE_MAX_HASH_LEN];
+ size_t kck_len;
+ struct crypto_bignum *own_commit_scalar;
+ struct crypto_bignum *own_commit_element_ffc;
+ struct crypto_ec_point *own_commit_element_ecc;
+ struct crypto_bignum *peer_commit_element_ffc;
+ struct crypto_ec_point *peer_commit_element_ecc;
+ struct crypto_ec_point *pwe_ecc;
+ struct crypto_bignum *pwe_ffc;
+ struct crypto_bignum *sae_rand;
+ struct crypto_ec *ec;
+ int prime_len;
+ int order_len;
+ const struct dh_group *dh;
+ const struct crypto_bignum *prime;
+ const struct crypto_bignum *order;
+ struct crypto_bignum *prime_buf;
+ struct crypto_bignum *order_buf;
+ struct wpabuf *anti_clogging_token;
+ char *pw_id;
+ int vlan_id;
+ u8 bssid[ETH_ALEN];
+ struct wpabuf *own_rejected_groups;
+ struct wpabuf *peer_rejected_groups;
+ unsigned int own_addr_higher:1;
+
+#ifdef CONFIG_SAE_PK
+ u8 kek[SAE_MAX_HASH_LEN];
+ size_t kek_len;
+ const struct sae_pk *ap_pk;
+ u8 own_addr[ETH_ALEN];
+ u8 peer_addr[ETH_ALEN];
+ u8 fingerprint[SAE_MAX_HASH_LEN];
+ size_t fingerprint_bytes;
+ size_t fingerprint_bits;
+ size_t lambda;
+ unsigned int sec;
+ u8 ssid[32];
+ size_t ssid_len;
+#ifdef CONFIG_TESTING_OPTIONS
+ bool omit_pk_elem;
+#endif /* CONFIG_TESTING_OPTIONS */
+#endif /* CONFIG_SAE_PK */
+};
+
+struct sae_pt {
+ struct sae_pt *next;
+ int group;
+ struct crypto_ec *ec;
+ struct crypto_ec_point *ecc_pt;
+
+ const struct dh_group *dh;
+ struct crypto_bignum *ffc_pt;
+#ifdef CONFIG_SAE_PK
+ u8 ssid[32];
+ size_t ssid_len;
+#endif /* CONFIG_SAE_PK */
+};
+
+enum sae_state {
+ SAE_NOTHING, SAE_COMMITTED, SAE_CONFIRMED, SAE_ACCEPTED
+};
+
+struct sae_data {
+ enum sae_state state;
+ u16 send_confirm;
+ u8 pmk[SAE_PMK_LEN];
+ u8 pmkid[SAE_PMKID_LEN];
+ struct crypto_bignum *peer_commit_scalar;
+ struct crypto_bignum *peer_commit_scalar_accepted;
+ int group;
+ unsigned int sync; /* protocol instance variable: Sync */
+ u16 rc; /* protocol instance variable: Rc (received send-confirm) */
+ unsigned int h2e:1;
+ unsigned int pk:1;
+ struct sae_temporary_data *tmp;
+};
+
+int sae_set_group(struct sae_data *sae, int group);
+void sae_clear_temp_data(struct sae_data *sae);
+void sae_clear_data(struct sae_data *sae);
+
+int sae_prepare_commit(const u8 *addr1, const u8 *addr2,
+ const u8 *password, size_t password_len,
+ struct sae_data *sae);
+int sae_prepare_commit_pt(struct sae_data *sae, const struct sae_pt *pt,
+ const u8 *addr1, const u8 *addr2,
+ int *rejected_groups, const struct sae_pk *pk);
+int sae_process_commit(struct sae_data *sae);
+int sae_write_commit(struct sae_data *sae, struct wpabuf *buf,
+ const struct wpabuf *token, const char *identifier);
+u16 sae_parse_commit(struct sae_data *sae, const u8 *data, size_t len,
+ const u8 **token, size_t *token_len, int *allowed_groups,
+ int h2e);
+int sae_write_confirm(struct sae_data *sae, struct wpabuf *buf);
+int sae_check_confirm(struct sae_data *sae, const u8 *data, size_t len);
+u16 sae_group_allowed(struct sae_data *sae, int *allowed_groups, u16 group);
+const char * sae_state_txt(enum sae_state state);
+size_t sae_ecc_prime_len_2_hash_len(size_t prime_len);
+size_t sae_ffc_prime_len_2_hash_len(size_t prime_len);
+struct sae_pt * sae_derive_pt(int *groups, const u8 *ssid, size_t ssid_len,
+ const u8 *password, size_t password_len,
+ const char *identifier);
+struct crypto_ec_point *
+sae_derive_pwe_from_pt_ecc(const struct sae_pt *pt,
+ const u8 *addr1, const u8 *addr2);
+struct crypto_bignum *
+sae_derive_pwe_from_pt_ffc(const struct sae_pt *pt,
+ const u8 *addr1, const u8 *addr2);
+void sae_deinit_pt(struct sae_pt *pt);
+
+/* sae_pk.c */
+#ifdef CONFIG_SAE_PK
+bool sae_pk_valid_password(const char *pw);
+#else /* CONFIG_SAE_PK */
+static inline bool sae_pk_valid_password(const char *pw)
+{
+ return false;
+}
+#endif /* CONFIG_SAE_PK */
+char * sae_pk_base32_encode(const u8 *src, size_t len_bits);
+u8 * sae_pk_base32_decode(const char *src, size_t len, size_t *out_len);
+int sae_pk_set_password(struct sae_data *sae, const char *password);
+void sae_deinit_pk(struct sae_pk *pk);
+struct sae_pk * sae_parse_pk(const char *val);
+int sae_write_confirm_pk(struct sae_data *sae, struct wpabuf *buf);
+int sae_check_confirm_pk(struct sae_data *sae, const u8 *ies, size_t ies_len);
+int sae_hash(size_t hash_len, const u8 *data, size_t len, u8 *hash);
+u32 sae_pk_get_be19(const u8 *buf);
+void sae_pk_buf_shift_left_19(u8 *buf, size_t len);
+
+#endif /* SAE_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/tnc.h b/ap/app/wpa_supplicant-2.10/src/common/tnc.h
new file mode 100755
index 0000000..108acf9
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/tnc.h
@@ -0,0 +1,121 @@
+/*
+ * TNC - Common defines
+ * Copyright (c) 2007-2014, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef TNC_H
+#define TNC_H
+
+typedef unsigned long TNC_UInt32;
+typedef unsigned char *TNC_BufferReference;
+
+typedef TNC_UInt32 TNC_IMVID;
+typedef TNC_UInt32 TNC_IMCID;
+typedef TNC_UInt32 TNC_ConnectionID;
+typedef TNC_UInt32 TNC_ConnectionState;
+typedef TNC_UInt32 TNC_RetryReason;
+typedef TNC_UInt32 TNC_IMV_Action_Recommendation;
+typedef TNC_UInt32 TNC_IMV_Evaluation_Result;
+typedef TNC_UInt32 TNC_MessageType;
+typedef TNC_MessageType *TNC_MessageTypeList;
+typedef TNC_UInt32 TNC_VendorID;
+typedef TNC_UInt32 TNC_Subtype;
+typedef TNC_UInt32 TNC_MessageSubtype;
+typedef TNC_UInt32 TNC_Version;
+typedef TNC_UInt32 TNC_Result;
+typedef TNC_UInt32 TNC_AttributeID;
+
+typedef TNC_Result (*TNC_TNCS_BindFunctionPointer)(
+ TNC_IMVID imvID,
+ char *functionName,
+ void **pOutfunctionPointer);
+typedef TNC_Result (*TNC_TNCS_ReportMessageTypesPointer)(
+ TNC_IMVID imvID,
+ TNC_MessageTypeList supportedTypes,
+ TNC_UInt32 typeCount);
+typedef TNC_Result (*TNC_TNCS_SendMessagePointer)(
+ TNC_IMVID imvID,
+ TNC_ConnectionID connectionID,
+ TNC_BufferReference message,
+ TNC_UInt32 messageLength,
+ TNC_MessageType messageType);
+typedef TNC_Result (*TNC_TNCS_RequestHandshakeRetryPointer)(
+ TNC_IMVID imvID,
+ TNC_ConnectionID connectionID,
+ TNC_RetryReason reason);
+typedef TNC_Result (*TNC_TNCS_ProvideRecommendationPointer)(
+ TNC_IMVID imvID,
+ TNC_ConnectionID connectionID,
+ TNC_IMV_Action_Recommendation recommendation,
+ TNC_IMV_Evaluation_Result evaluation);
+typedef TNC_Result (*TNC_TNCC_BindFunctionPointer)(
+ TNC_IMCID imcID,
+ char *functionName,
+ void **pOutfunctionPointer);
+typedef TNC_Result (*TNC_TNCC_SendMessagePointer)(
+ TNC_IMCID imcID,
+ TNC_ConnectionID connectionID,
+ TNC_BufferReference message,
+ TNC_UInt32 messageLength,
+ TNC_MessageType messageType);
+typedef TNC_Result (*TNC_TNCC_ReportMessageTypesPointer)(
+ TNC_IMCID imcID,
+ TNC_MessageTypeList supportedTypes,
+ TNC_UInt32 typeCount);
+typedef TNC_Result (*TNC_TNCC_RequestHandshakeRetryPointer)(
+ TNC_IMCID imcID,
+ TNC_ConnectionID connectionID,
+ TNC_RetryReason reason);
+
+#define TNC_IFIMV_VERSION_1 1
+#define TNC_IFIMC_VERSION_1 1
+
+#define TNC_RESULT_SUCCESS 0
+#define TNC_RESULT_NOT_INITIALIZED 1
+#define TNC_RESULT_ALREADY_INITIALIZED 2
+#define TNC_RESULT_NO_COMMON_VERSION 3
+#define TNC_RESULT_CANT_RETRY 4
+#define TNC_RESULT_WONT_RETRY 5
+#define TNC_RESULT_INVALID_PARAMETER 6
+#define TNC_RESULT_CANT_RESPOND 7
+#define TNC_RESULT_ILLEGAL_OPERATION 8
+#define TNC_RESULT_OTHER 9
+#define TNC_RESULT_FATAL 10
+
+#define TNC_CONNECTION_STATE_CREATE 0
+#define TNC_CONNECTION_STATE_HANDSHAKE 1
+#define TNC_CONNECTION_STATE_ACCESS_ALLOWED 2
+#define TNC_CONNECTION_STATE_ACCESS_ISOLATED 3
+#define TNC_CONNECTION_STATE_ACCESS_NONE 4
+#define TNC_CONNECTION_STATE_DELETE 5
+
+#define TNC_VENDORID_ANY ((TNC_VendorID) 0xffffff)
+#define TNC_SUBTYPE_ANY ((TNC_Subtype) 0xff)
+
+/* TNCC-TNCS Message Types */
+#define TNC_TNCCS_RECOMMENDATION 0x00000001
+#define TNC_TNCCS_ERROR 0x00000002
+#define TNC_TNCCS_PREFERREDLANGUAGE 0x00000003
+#define TNC_TNCCS_REASONSTRINGS 0x00000004
+
+/* Possible TNC_IMV_Action_Recommendation values: */
+enum IMV_Action_Recommendation {
+ TNC_IMV_ACTION_RECOMMENDATION_ALLOW,
+ TNC_IMV_ACTION_RECOMMENDATION_NO_ACCESS,
+ TNC_IMV_ACTION_RECOMMENDATION_ISOLATE,
+ TNC_IMV_ACTION_RECOMMENDATION_NO_RECOMMENDATION
+};
+
+/* Possible TNC_IMV_Evaluation_Result values: */
+enum IMV_Evaluation_Result {
+ TNC_IMV_EVALUATION_RESULT_COMPLIANT,
+ TNC_IMV_EVALUATION_RESULT_NONCOMPLIANT_MINOR,
+ TNC_IMV_EVALUATION_RESULT_NONCOMPLIANT_MAJOR,
+ TNC_IMV_EVALUATION_RESULT_ERROR,
+ TNC_IMV_EVALUATION_RESULT_DONT_KNOW
+};
+
+#endif /* TNC_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/version.h b/ap/app/wpa_supplicant-2.10/src/common/version.h
new file mode 100755
index 0000000..7502f58
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/version.h
@@ -0,0 +1,14 @@
+#ifndef VERSION_H
+#define VERSION_H
+
+#ifndef VERSION_STR_POSTFIX
+#define VERSION_STR_POSTFIX ""
+#endif /* VERSION_STR_POSTFIX */
+
+#ifndef GIT_VERSION_STR_POSTFIX
+#define GIT_VERSION_STR_POSTFIX ""
+#endif /* GIT_VERSION_STR_POSTFIX */
+
+#define VERSION_STR "2.10" VERSION_STR_POSTFIX GIT_VERSION_STR_POSTFIX
+
+#endif /* VERSION_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/wpa_common.h b/ap/app/wpa_supplicant-2.10/src/common/wpa_common.h
new file mode 100755
index 0000000..c28c55d
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/wpa_common.h
@@ -0,0 +1,678 @@
+/*
+ * WPA definitions shared between hostapd and wpa_supplicant
+ * Copyright (c) 2002-2018, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPA_COMMON_H
+#define WPA_COMMON_H
+
+/* IEEE 802.11i */
+#define PMKID_LEN 16
+#define PMK_LEN 32
+#define PMK_LEN_SUITE_B_192 48
+#define PMK_LEN_MAX 64
+#define WPA_REPLAY_COUNTER_LEN 8
+#define WPA_NONCE_LEN 32
+#define WPA_KEY_RSC_LEN 8
+#define WPA_GMK_LEN 32
+#define WPA_GTK_MAX_LEN 32
+#define WPA_PASN_PMK_LEN 32
+#define WPA_PASN_MAX_MIC_LEN 24
+#define WPA_MAX_RSNXE_LEN 4
+
+#define OWE_DH_GROUP 19
+
+#ifdef CONFIG_NO_TKIP
+#define WPA_ALLOWED_PAIRWISE_CIPHERS \
+(WPA_CIPHER_CCMP | WPA_CIPHER_GCMP | WPA_CIPHER_NONE | \
+WPA_CIPHER_GCMP_256 | WPA_CIPHER_CCMP_256)
+#define WPA_ALLOWED_GROUP_CIPHERS \
+(WPA_CIPHER_CCMP | WPA_CIPHER_GCMP | \
+WPA_CIPHER_GCMP_256 | WPA_CIPHER_CCMP_256 | \
+WPA_CIPHER_GTK_NOT_USED)
+#else /* CONFIG_NO_TKIP */
+#define WPA_ALLOWED_PAIRWISE_CIPHERS \
+(WPA_CIPHER_CCMP | WPA_CIPHER_GCMP | WPA_CIPHER_TKIP | WPA_CIPHER_NONE | \
+WPA_CIPHER_GCMP_256 | WPA_CIPHER_CCMP_256)
+#define WPA_ALLOWED_GROUP_CIPHERS \
+(WPA_CIPHER_CCMP | WPA_CIPHER_GCMP | WPA_CIPHER_TKIP | \
+WPA_CIPHER_GCMP_256 | WPA_CIPHER_CCMP_256 | \
+WPA_CIPHER_GTK_NOT_USED)
+#endif /* CONFIG_NO_TKIP */
+#define WPA_ALLOWED_GROUP_MGMT_CIPHERS \
+(WPA_CIPHER_AES_128_CMAC | WPA_CIPHER_BIP_GMAC_128 | WPA_CIPHER_BIP_GMAC_256 | \
+WPA_CIPHER_BIP_CMAC_256)
+
+#define WPA_SELECTOR_LEN 4
+#define WPA_VERSION 1
+#define RSN_SELECTOR_LEN 4
+#define RSN_VERSION 1
+
+#define RSN_SELECTOR(a, b, c, d) \
+ ((((u32) (a)) << 24) | (((u32) (b)) << 16) | (((u32) (c)) << 8) | \
+ (u32) (d))
+
+#define WPA_AUTH_KEY_MGMT_NONE RSN_SELECTOR(0x00, 0x50, 0xf2, 0)
+#define WPA_AUTH_KEY_MGMT_UNSPEC_802_1X RSN_SELECTOR(0x00, 0x50, 0xf2, 1)
+#define WPA_AUTH_KEY_MGMT_PSK_OVER_802_1X RSN_SELECTOR(0x00, 0x50, 0xf2, 2)
+#define WPA_AUTH_KEY_MGMT_CCKM RSN_SELECTOR(0x00, 0x40, 0x96, 0)
+#define WPA_CIPHER_SUITE_NONE RSN_SELECTOR(0x00, 0x50, 0xf2, 0)
+#define WPA_CIPHER_SUITE_TKIP RSN_SELECTOR(0x00, 0x50, 0xf2, 2)
+#define WPA_CIPHER_SUITE_CCMP RSN_SELECTOR(0x00, 0x50, 0xf2, 4)
+
+
+#define RSN_AUTH_KEY_MGMT_UNSPEC_802_1X RSN_SELECTOR(0x00, 0x0f, 0xac, 1)
+#define RSN_AUTH_KEY_MGMT_PSK_OVER_802_1X RSN_SELECTOR(0x00, 0x0f, 0xac, 2)
+#define RSN_AUTH_KEY_MGMT_FT_802_1X RSN_SELECTOR(0x00, 0x0f, 0xac, 3)
+#define RSN_AUTH_KEY_MGMT_FT_PSK RSN_SELECTOR(0x00, 0x0f, 0xac, 4)
+#define RSN_AUTH_KEY_MGMT_802_1X_SHA256 RSN_SELECTOR(0x00, 0x0f, 0xac, 5)
+#define RSN_AUTH_KEY_MGMT_PSK_SHA256 RSN_SELECTOR(0x00, 0x0f, 0xac, 6)
+#define RSN_AUTH_KEY_MGMT_TPK_HANDSHAKE RSN_SELECTOR(0x00, 0x0f, 0xac, 7)
+#define RSN_AUTH_KEY_MGMT_SAE RSN_SELECTOR(0x00, 0x0f, 0xac, 8)
+#define RSN_AUTH_KEY_MGMT_FT_SAE RSN_SELECTOR(0x00, 0x0f, 0xac, 9)
+#define RSN_AUTH_KEY_MGMT_802_1X_SUITE_B RSN_SELECTOR(0x00, 0x0f, 0xac, 11)
+#define RSN_AUTH_KEY_MGMT_802_1X_SUITE_B_192 RSN_SELECTOR(0x00, 0x0f, 0xac, 12)
+#define RSN_AUTH_KEY_MGMT_FT_802_1X_SHA384 RSN_SELECTOR(0x00, 0x0f, 0xac, 13)
+#define RSN_AUTH_KEY_MGMT_FILS_SHA256 RSN_SELECTOR(0x00, 0x0f, 0xac, 14)
+#define RSN_AUTH_KEY_MGMT_FILS_SHA384 RSN_SELECTOR(0x00, 0x0f, 0xac, 15)
+#define RSN_AUTH_KEY_MGMT_FT_FILS_SHA256 RSN_SELECTOR(0x00, 0x0f, 0xac, 16)
+#define RSN_AUTH_KEY_MGMT_FT_FILS_SHA384 RSN_SELECTOR(0x00, 0x0f, 0xac, 17)
+#define RSN_AUTH_KEY_MGMT_OWE RSN_SELECTOR(0x00, 0x0f, 0xac, 18)
+
+#define RSN_AUTH_KEY_MGMT_PASN RSN_SELECTOR(0x00, 0x0f, 0xac, 21)
+
+#define RSN_AUTH_KEY_MGMT_CCKM RSN_SELECTOR(0x00, 0x40, 0x96, 0x00)
+#define RSN_AUTH_KEY_MGMT_OSEN RSN_SELECTOR(0x50, 0x6f, 0x9a, 0x01)
+#define RSN_AUTH_KEY_MGMT_DPP RSN_SELECTOR(0x50, 0x6f, 0x9a, 0x02)
+
+#define RSN_CIPHER_SUITE_NONE RSN_SELECTOR(0x00, 0x0f, 0xac, 0)
+#define RSN_CIPHER_SUITE_WEP40 RSN_SELECTOR(0x00, 0x0f, 0xac, 1)
+#define RSN_CIPHER_SUITE_TKIP RSN_SELECTOR(0x00, 0x0f, 0xac, 2)
+#if 0
+#define RSN_CIPHER_SUITE_WRAP RSN_SELECTOR(0x00, 0x0f, 0xac, 3)
+#endif
+#define RSN_CIPHER_SUITE_CCMP RSN_SELECTOR(0x00, 0x0f, 0xac, 4)
+#define RSN_CIPHER_SUITE_WEP104 RSN_SELECTOR(0x00, 0x0f, 0xac, 5)
+#define RSN_CIPHER_SUITE_AES_128_CMAC RSN_SELECTOR(0x00, 0x0f, 0xac, 6)
+#define RSN_CIPHER_SUITE_NO_GROUP_ADDRESSED RSN_SELECTOR(0x00, 0x0f, 0xac, 7)
+#define RSN_CIPHER_SUITE_GCMP RSN_SELECTOR(0x00, 0x0f, 0xac, 8)
+#define RSN_CIPHER_SUITE_GCMP_256 RSN_SELECTOR(0x00, 0x0f, 0xac, 9)
+#define RSN_CIPHER_SUITE_CCMP_256 RSN_SELECTOR(0x00, 0x0f, 0xac, 10)
+#define RSN_CIPHER_SUITE_BIP_GMAC_128 RSN_SELECTOR(0x00, 0x0f, 0xac, 11)
+#define RSN_CIPHER_SUITE_BIP_GMAC_256 RSN_SELECTOR(0x00, 0x0f, 0xac, 12)
+#define RSN_CIPHER_SUITE_BIP_CMAC_256 RSN_SELECTOR(0x00, 0x0f, 0xac, 13)
+#define RSN_CIPHER_SUITE_SMS4 RSN_SELECTOR(0x00, 0x14, 0x72, 1)
+#define RSN_CIPHER_SUITE_CKIP RSN_SELECTOR(0x00, 0x40, 0x96, 0)
+#define RSN_CIPHER_SUITE_CKIP_CMIC RSN_SELECTOR(0x00, 0x40, 0x96, 1)
+#define RSN_CIPHER_SUITE_CMIC RSN_SELECTOR(0x00, 0x40, 0x96, 2)
+/* KRK is defined for nl80211 use only */
+#define RSN_CIPHER_SUITE_KRK RSN_SELECTOR(0x00, 0x40, 0x96, 255)
+
+/* EAPOL-Key Key Data Encapsulation
+ * GroupKey and PeerKey require encryption, otherwise, encryption is optional.
+ */
+#define RSN_KEY_DATA_GROUPKEY RSN_SELECTOR(0x00, 0x0f, 0xac, 1)
+#if 0
+#define RSN_KEY_DATA_STAKEY RSN_SELECTOR(0x00, 0x0f, 0xac, 2)
+#endif
+#define RSN_KEY_DATA_MAC_ADDR RSN_SELECTOR(0x00, 0x0f, 0xac, 3)
+#define RSN_KEY_DATA_PMKID RSN_SELECTOR(0x00, 0x0f, 0xac, 4)
+#define RSN_KEY_DATA_IGTK RSN_SELECTOR(0x00, 0x0f, 0xac, 9)
+#define RSN_KEY_DATA_KEYID RSN_SELECTOR(0x00, 0x0f, 0xac, 10)
+#define RSN_KEY_DATA_MULTIBAND_GTK RSN_SELECTOR(0x00, 0x0f, 0xac, 11)
+#define RSN_KEY_DATA_MULTIBAND_KEYID RSN_SELECTOR(0x00, 0x0f, 0xac, 12)
+#define RSN_KEY_DATA_OCI RSN_SELECTOR(0x00, 0x0f, 0xac, 13)
+#define RSN_KEY_DATA_BIGTK RSN_SELECTOR(0x00, 0x0f, 0xac, 14)
+
+#define WFA_KEY_DATA_IP_ADDR_REQ RSN_SELECTOR(0x50, 0x6f, 0x9a, 4)
+#define WFA_KEY_DATA_IP_ADDR_ALLOC RSN_SELECTOR(0x50, 0x6f, 0x9a, 5)
+#define WFA_KEY_DATA_TRANSITION_DISABLE RSN_SELECTOR(0x50, 0x6f, 0x9a, 0x20)
+#define WFA_KEY_DATA_DPP RSN_SELECTOR(0x50, 0x6f, 0x9a, 0x21)
+
+#define WPA_OUI_TYPE RSN_SELECTOR(0x00, 0x50, 0xf2, 1)
+
+#define RSN_SELECTOR_PUT(a, val) WPA_PUT_BE32((u8 *) (a), (val))
+#define RSN_SELECTOR_GET(a) WPA_GET_BE32((const u8 *) (a))
+
+#define RSN_NUM_REPLAY_COUNTERS_1 0
+#define RSN_NUM_REPLAY_COUNTERS_2 1
+#define RSN_NUM_REPLAY_COUNTERS_4 2
+#define RSN_NUM_REPLAY_COUNTERS_16 3
+
+
+#ifdef _MSC_VER
+#pragma pack(push, 1)
+#endif /* _MSC_VER */
+
+#define WPA_IGTK_LEN 16
+#define WPA_IGTK_MAX_LEN 32
+#define WPA_BIGTK_LEN 16
+#define WPA_BIGTK_MAX_LEN 32
+
+
+/* IEEE 802.11, 7.3.2.25.3 RSN Capabilities */
+#define WPA_CAPABILITY_PREAUTH BIT(0)
+#define WPA_CAPABILITY_NO_PAIRWISE BIT(1)
+/* B2-B3: PTKSA Replay Counter */
+/* B4-B5: GTKSA Replay Counter */
+#define WPA_CAPABILITY_MFPR BIT(6)
+#define WPA_CAPABILITY_MFPC BIT(7)
+/* B8: Reserved */
+#define WPA_CAPABILITY_PEERKEY_ENABLED BIT(9)
+#define WPA_CAPABILITY_SPP_A_MSDU_CAPABLE BIT(10)
+#define WPA_CAPABILITY_SPP_A_MSDU_REQUIRED BIT(11)
+#define WPA_CAPABILITY_PBAC BIT(12)
+#define WPA_CAPABILITY_EXT_KEY_ID_FOR_UNICAST BIT(13)
+#define WPA_CAPABILITY_OCVC BIT(14)
+/* B15: Reserved */
+
+
+/* IEEE 802.11r */
+#define MOBILITY_DOMAIN_ID_LEN 2
+#define FT_R0KH_ID_MAX_LEN 48
+#define FT_R1KH_ID_LEN 6
+#define WPA_PMK_NAME_LEN 16
+
+
+/* IEEE 802.11, 8.5.2 EAPOL-Key frames */
+#define WPA_KEY_INFO_TYPE_MASK ((u16) (BIT(0) | BIT(1) | BIT(2)))
+#define WPA_KEY_INFO_TYPE_AKM_DEFINED 0
+#define WPA_KEY_INFO_TYPE_HMAC_MD5_RC4 BIT(0)
+#define WPA_KEY_INFO_TYPE_HMAC_SHA1_AES BIT(1)
+#define WPA_KEY_INFO_TYPE_AES_128_CMAC 3
+#define WPA_KEY_INFO_KEY_TYPE BIT(3) /* 1 = Pairwise, 0 = Group key */
+/* bit4..5 is used in WPA, but is reserved in IEEE 802.11i/RSN */
+#define WPA_KEY_INFO_KEY_INDEX_MASK (BIT(4) | BIT(5))
+#define WPA_KEY_INFO_KEY_INDEX_SHIFT 4
+#define WPA_KEY_INFO_INSTALL BIT(6) /* pairwise */
+#define WPA_KEY_INFO_TXRX BIT(6) /* group */
+#define WPA_KEY_INFO_ACK BIT(7)
+#define WPA_KEY_INFO_MIC BIT(8)
+#define WPA_KEY_INFO_SECURE BIT(9)
+#define WPA_KEY_INFO_ERROR BIT(10)
+#define WPA_KEY_INFO_REQUEST BIT(11)
+#define WPA_KEY_INFO_ENCR_KEY_DATA BIT(12) /* IEEE 802.11i/RSN only */
+#define WPA_KEY_INFO_SMK_MESSAGE BIT(13)
+
+
+struct wpa_eapol_key {
+ u8 type;
+ /* Note: key_info, key_length, and key_data_length are unaligned */
+ u8 key_info[2]; /* big endian */
+ u8 key_length[2]; /* big endian */
+ u8 replay_counter[WPA_REPLAY_COUNTER_LEN];
+ u8 key_nonce[WPA_NONCE_LEN];
+ u8 key_iv[16];
+ u8 key_rsc[WPA_KEY_RSC_LEN];
+ u8 key_id[8]; /* Reserved in IEEE 802.11i/RSN */
+ /* variable length Key MIC field */
+ /* big endian 2-octet Key Data Length field */
+ /* followed by Key Data Length bytes of Key Data */
+} STRUCT_PACKED;
+
+#define WPA_EAPOL_KEY_MIC_MAX_LEN 32
+#define WPA_KCK_MAX_LEN 32
+#define WPA_KEK_MAX_LEN 64
+#define WPA_TK_MAX_LEN 32
+#define WPA_KDK_MAX_LEN 32
+#define FILS_ICK_MAX_LEN 48
+#define FILS_FT_MAX_LEN 48
+#define WPA_PASN_KCK_LEN 32
+#define WPA_PASN_MIC_MAX_LEN 24
+
+/**
+ * struct wpa_ptk - WPA Pairwise Transient Key
+ * IEEE Std 802.11i-2004 - 8.5.1.2 Pairwise key hierarchy
+ */
+struct wpa_ptk {
+ u8 kck[WPA_KCK_MAX_LEN]; /* EAPOL-Key Key Confirmation Key (KCK) */
+ u8 kek[WPA_KEK_MAX_LEN]; /* EAPOL-Key Key Encryption Key (KEK) */
+ u8 tk[WPA_TK_MAX_LEN]; /* Temporal Key (TK) */
+ u8 kck2[WPA_KCK_MAX_LEN]; /* FT reasoc Key Confirmation Key (KCK2) */
+ u8 kek2[WPA_KEK_MAX_LEN]; /* FT reassoc Key Encryption Key (KEK2) */
+ u8 kdk[WPA_KDK_MAX_LEN]; /* Key Derivation Key */
+ size_t kck_len;
+ size_t kek_len;
+ size_t tk_len;
+ size_t kck2_len;
+ size_t kek2_len;
+ size_t kdk_len;
+ int installed; /* 1 if key has already been installed to driver */
+};
+
+struct wpa_gtk {
+ u8 gtk[WPA_GTK_MAX_LEN];
+ size_t gtk_len;
+};
+
+struct wpa_igtk {
+ u8 igtk[WPA_IGTK_MAX_LEN];
+ size_t igtk_len;
+};
+
+struct wpa_bigtk {
+ u8 bigtk[WPA_BIGTK_MAX_LEN];
+ size_t bigtk_len;
+};
+
+/* WPA IE version 1
+ * 00-50-f2:1 (OUI:OUI type)
+ * 0x01 0x00 (version; little endian)
+ * (all following fields are optional:)
+ * Group Suite Selector (4 octets) (default: TKIP)
+ * Pairwise Suite Count (2 octets, little endian) (default: 1)
+ * Pairwise Suite List (4 * n octets) (default: TKIP)
+ * Authenticated Key Management Suite Count (2 octets, little endian)
+ * (default: 1)
+ * Authenticated Key Management Suite List (4 * n octets)
+ * (default: unspec 802.1X)
+ * WPA Capabilities (2 octets, little endian) (default: 0)
+ */
+
+struct wpa_ie_hdr {
+ u8 elem_id;
+ u8 len;
+ u8 oui[4]; /* 24-bit OUI followed by 8-bit OUI type */
+ u8 version[2]; /* little endian */
+} STRUCT_PACKED;
+
+
+/* 1/4: PMKID
+ * 2/4: RSN IE
+ * 3/4: one or two RSN IEs + GTK IE (encrypted)
+ * 4/4: empty
+ * 1/2: GTK IE (encrypted)
+ * 2/2: empty
+ */
+
+/* RSN IE version 1
+ * 0x01 0x00 (version; little endian)
+ * (all following fields are optional:)
+ * Group Suite Selector (4 octets) (default: CCMP)
+ * Pairwise Suite Count (2 octets, little endian) (default: 1)
+ * Pairwise Suite List (4 * n octets) (default: CCMP)
+ * Authenticated Key Management Suite Count (2 octets, little endian)
+ * (default: 1)
+ * Authenticated Key Management Suite List (4 * n octets)
+ * (default: unspec 802.1X)
+ * RSN Capabilities (2 octets, little endian) (default: 0)
+ * PMKID Count (2 octets) (default: 0)
+ * PMKID List (16 * n octets)
+ * Management Group Cipher Suite (4 octets) (default: AES-128-CMAC)
+ */
+
+struct rsn_ie_hdr {
+ u8 elem_id; /* WLAN_EID_RSN */
+ u8 len;
+ u8 version[2]; /* little endian */
+} STRUCT_PACKED;
+
+
+struct rsn_error_kde {
+ be16 mui;
+ be16 error_type;
+} STRUCT_PACKED;
+
+#define WPA_IGTK_KDE_PREFIX_LEN (2 + 6)
+struct wpa_igtk_kde {
+ u8 keyid[2];
+ u8 pn[6];
+ u8 igtk[WPA_IGTK_MAX_LEN];
+} STRUCT_PACKED;
+
+#define WPA_BIGTK_KDE_PREFIX_LEN (2 + 6)
+struct wpa_bigtk_kde {
+ u8 keyid[2];
+ u8 pn[6];
+ u8 bigtk[WPA_BIGTK_MAX_LEN];
+} STRUCT_PACKED;
+
+struct rsn_mdie {
+ u8 mobility_domain[MOBILITY_DOMAIN_ID_LEN];
+ u8 ft_capab;
+} STRUCT_PACKED;
+
+#define RSN_FT_CAPAB_FT_OVER_DS BIT(0)
+#define RSN_FT_CAPAB_FT_RESOURCE_REQ_SUPP BIT(1)
+
+struct rsn_ftie {
+ u8 mic_control[2];
+ u8 mic[16];
+ u8 anonce[WPA_NONCE_LEN];
+ u8 snonce[WPA_NONCE_LEN];
+ /* followed by optional parameters */
+} STRUCT_PACKED;
+
+struct rsn_ftie_sha384 {
+ u8 mic_control[2];
+ u8 mic[24];
+ u8 anonce[WPA_NONCE_LEN];
+ u8 snonce[WPA_NONCE_LEN];
+ /* followed by optional parameters */
+} STRUCT_PACKED;
+
+#define FTIE_SUBELEM_R1KH_ID 1
+#define FTIE_SUBELEM_GTK 2
+#define FTIE_SUBELEM_R0KH_ID 3
+#define FTIE_SUBELEM_IGTK 4
+#define FTIE_SUBELEM_OCI 5
+#define FTIE_SUBELEM_BIGTK 6
+
+struct rsn_rdie {
+ u8 id;
+ u8 descr_count;
+ le16 status_code;
+} STRUCT_PACKED;
+
+/* WFA Transition Disable KDE (using OUI_WFA) */
+/* Transition Disable Bitmap bits */
+#define TRANSITION_DISABLE_WPA3_PERSONAL BIT(0)
+#define TRANSITION_DISABLE_SAE_PK BIT(1)
+#define TRANSITION_DISABLE_WPA3_ENTERPRISE BIT(2)
+#define TRANSITION_DISABLE_ENHANCED_OPEN BIT(3)
+
+/* DPP KDE Flags */
+#define DPP_KDE_PFS_ALLOWED BIT(0)
+#define DPP_KDE_PFS_REQUIRED BIT(1)
+
+#ifdef _MSC_VER
+#pragma pack(pop)
+#endif /* _MSC_VER */
+
+
+int wpa_eapol_key_mic(const u8 *key, size_t key_len, int akmp, int ver,
+ const u8 *buf, size_t len, u8 *mic);
+int wpa_pmk_to_ptk(const u8 *pmk, size_t pmk_len, const char *label,
+ const u8 *addr1, const u8 *addr2,
+ const u8 *nonce1, const u8 *nonce2,
+ struct wpa_ptk *ptk, int akmp, int cipher,
+ const u8 *z, size_t z_len, size_t kdk_len);
+int fils_rmsk_to_pmk(int akmp, const u8 *rmsk, size_t rmsk_len,
+ const u8 *snonce, const u8 *anonce, const u8 *dh_ss,
+ size_t dh_ss_len, u8 *pmk, size_t *pmk_len);
+int fils_pmkid_erp(int akmp, const u8 *reauth, size_t reauth_len,
+ u8 *pmkid);
+int fils_pmk_to_ptk(const u8 *pmk, size_t pmk_len, const u8 *spa, const u8 *aa,
+ const u8 *snonce, const u8 *anonce, const u8 *dhss,
+ size_t dhss_len, struct wpa_ptk *ptk,
+ u8 *ick, size_t *ick_len, int akmp, int cipher,
+ u8 *fils_ft, size_t *fils_ft_len, size_t kdk_len);
+int fils_key_auth_sk(const u8 *ick, size_t ick_len, const u8 *snonce,
+ const u8 *anonce, const u8 *sta_addr, const u8 *bssid,
+ const u8 *g_sta, size_t g_sta_len,
+ const u8 *g_ap, size_t g_ap_len,
+ int akmp, u8 *key_auth_sta, u8 *key_auth_ap,
+ size_t *key_auth_len);
+
+#ifdef CONFIG_IEEE80211R
+int wpa_ft_mic(const u8 *kck, size_t kck_len, const u8 *sta_addr,
+ const u8 *ap_addr, u8 transaction_seqnum,
+ const u8 *mdie, size_t mdie_len,
+ const u8 *ftie, size_t ftie_len,
+ const u8 *rsnie, size_t rsnie_len,
+ const u8 *ric, size_t ric_len,
+ const u8 *rsnxe, size_t rsnxe_len,
+ u8 *mic);
+int wpa_derive_pmk_r0(const u8 *xxkey, size_t xxkey_len,
+ const u8 *ssid, size_t ssid_len,
+ const u8 *mdid, const u8 *r0kh_id, size_t r0kh_id_len,
+ const u8 *s0kh_id, u8 *pmk_r0, u8 *pmk_r0_name,
+ int use_sha384);
+int wpa_derive_pmk_r1_name(const u8 *pmk_r0_name, const u8 *r1kh_id,
+ const u8 *s1kh_id, u8 *pmk_r1_name, int use_sha384);
+int wpa_derive_pmk_r1(const u8 *pmk_r0, size_t pmk_r0_len,
+ const u8 *pmk_r0_name,
+ const u8 *r1kh_id, const u8 *s1kh_id,
+ u8 *pmk_r1, u8 *pmk_r1_name);
+int wpa_pmk_r1_to_ptk(const u8 *pmk_r1, size_t pmk_r1_len, const u8 *snonce,
+ const u8 *anonce, const u8 *sta_addr, const u8 *bssid,
+ const u8 *pmk_r1_name,
+ struct wpa_ptk *ptk, u8 *ptk_name, int akmp, int cipher,
+ size_t kdk_len);
+#endif /* CONFIG_IEEE80211R */
+
+struct wpa_ie_data {
+ int proto;
+ int pairwise_cipher;
+ int has_pairwise;
+ int group_cipher;
+ int has_group;
+ int key_mgmt;
+ int capabilities;
+ size_t num_pmkid;
+ const u8 *pmkid;
+ int mgmt_group_cipher;
+};
+
+
+int wpa_parse_wpa_ie_rsn(const u8 *rsn_ie, size_t rsn_ie_len,
+ struct wpa_ie_data *data);
+int wpa_parse_wpa_ie_wpa(const u8 *wpa_ie, size_t wpa_ie_len,
+ struct wpa_ie_data *data);
+int wpa_default_rsn_cipher(int freq);
+
+void rsn_pmkid(const u8 *pmk, size_t pmk_len, const u8 *aa, const u8 *spa,
+ u8 *pmkid, int akmp);
+#ifdef CONFIG_SUITEB
+int rsn_pmkid_suite_b(const u8 *kck, size_t kck_len, const u8 *aa,
+ const u8 *spa, u8 *pmkid);
+#else /* CONFIG_SUITEB */
+static inline int rsn_pmkid_suite_b(const u8 *kck, size_t kck_len, const u8 *aa,
+ const u8 *spa, u8 *pmkid)
+{
+ return -1;
+}
+#endif /* CONFIG_SUITEB */
+#ifdef CONFIG_SUITEB192
+int rsn_pmkid_suite_b_192(const u8 *kck, size_t kck_len, const u8 *aa,
+ const u8 *spa, u8 *pmkid);
+#else /* CONFIG_SUITEB192 */
+static inline int rsn_pmkid_suite_b_192(const u8 *kck, size_t kck_len,
+ const u8 *aa, const u8 *spa, u8 *pmkid)
+{
+ return -1;
+}
+#endif /* CONFIG_SUITEB192 */
+
+const char * wpa_cipher_txt(int cipher);
+const char * wpa_key_mgmt_txt(int key_mgmt, int proto);
+u32 wpa_akm_to_suite(int akm);
+int wpa_compare_rsn_ie(int ft_initial_assoc,
+ const u8 *ie1, size_t ie1len,
+ const u8 *ie2, size_t ie2len);
+int wpa_insert_pmkid(u8 *ies, size_t *ies_len, const u8 *pmkid);
+
+struct wpa_ft_ies {
+ const u8 *mdie;
+ size_t mdie_len;
+ const u8 *ftie;
+ size_t ftie_len;
+ const u8 *r1kh_id;
+ const u8 *gtk;
+ size_t gtk_len;
+ const u8 *r0kh_id;
+ size_t r0kh_id_len;
+ const u8 *fte_anonce;
+ const u8 *fte_snonce;
+ const u8 *rsn;
+ size_t rsn_len;
+ u16 rsn_capab;
+ const u8 *rsn_pmkid;
+ const u8 *tie;
+ size_t tie_len;
+ const u8 *igtk;
+ size_t igtk_len;
+ const u8 *bigtk;
+ size_t bigtk_len;
+#ifdef CONFIG_OCV
+ const u8 *oci;
+ size_t oci_len;
+#endif /* CONFIG_OCV */
+ const u8 *ric;
+ size_t ric_len;
+ int key_mgmt;
+ int pairwise_cipher;
+ const u8 *rsnxe;
+ size_t rsnxe_len;
+};
+
+/* IEEE P802.11az/D2.6 - 9.4.2.303 PASN Parameters element */
+#define WPA_PASN_CTRL_COMEBACK_INFO_PRESENT BIT(0)
+#define WPA_PASN_CTRL_GROUP_AND_KEY_PRESENT BIT(1)
+
+#define WPA_PASN_WRAPPED_DATA_NO 0
+#define WPA_PASN_WRAPPED_DATA_FT 1
+#define WPA_PASN_WRAPPED_DATA_FILS_SK 2
+#define WPA_PASN_WRAPPED_DATA_SAE 3
+
+struct pasn_parameter_ie {
+ u8 id;
+ u8 len;
+ u8 id_ext;
+ u8 control; /* WPA_PASN_CTRL_* */
+ u8 wrapped_data_format; /* WPA_PASN_WRAPPED_DATA_* */
+} STRUCT_PACKED;
+
+struct wpa_pasn_params_data {
+ u8 wrapped_data_format;
+ u16 after;
+ u8 comeback_len;
+ const u8 *comeback;
+ u16 group;
+ u8 pubkey_len;
+ const u8 *pubkey;
+};
+
+/* See RFC 5480 section 2.2 */
+#define WPA_PASN_PUBKEY_COMPRESSED_0 0x02
+#define WPA_PASN_PUBKEY_COMPRESSED_1 0x03
+#define WPA_PASN_PUBKEY_UNCOMPRESSED 0x04
+
+int wpa_ft_parse_ies(const u8 *ies, size_t ies_len, struct wpa_ft_ies *parse,
+ int use_sha384);
+
+struct wpa_eapol_ie_parse {
+ const u8 *wpa_ie;
+ size_t wpa_ie_len;
+ const u8 *rsn_ie;
+ size_t rsn_ie_len;
+ const u8 *pmkid;
+ const u8 *key_id;
+ const u8 *gtk;
+ size_t gtk_len;
+ const u8 *mac_addr;
+ size_t mac_addr_len;
+ const u8 *igtk;
+ size_t igtk_len;
+ const u8 *bigtk;
+ size_t bigtk_len;
+ const u8 *mdie;
+ size_t mdie_len;
+ const u8 *ftie;
+ size_t ftie_len;
+ const u8 *ip_addr_req;
+ const u8 *ip_addr_alloc;
+ const u8 *transition_disable;
+ size_t transition_disable_len;
+ const u8 *dpp_kde;
+ size_t dpp_kde_len;
+ const u8 *oci;
+ size_t oci_len;
+ const u8 *osen;
+ size_t osen_len;
+ const u8 *rsnxe;
+ size_t rsnxe_len;
+ const u8 *reassoc_deadline;
+ const u8 *key_lifetime;
+ const u8 *lnkid;
+ size_t lnkid_len;
+ const u8 *ext_capab;
+ size_t ext_capab_len;
+ const u8 *supp_rates;
+ size_t supp_rates_len;
+ const u8 *ext_supp_rates;
+ size_t ext_supp_rates_len;
+ const u8 *ht_capabilities;
+ const u8 *vht_capabilities;
+ const u8 *he_capabilities;
+ size_t he_capab_len;
+ const u8 *he_6ghz_capabilities;
+ const u8 *supp_channels;
+ size_t supp_channels_len;
+ const u8 *supp_oper_classes;
+ size_t supp_oper_classes_len;
+ u8 qosinfo;
+ u16 aid;
+ const u8 *wmm;
+ size_t wmm_len;
+};
+
+int wpa_parse_kde_ies(const u8 *buf, size_t len, struct wpa_eapol_ie_parse *ie);
+static inline int wpa_supplicant_parse_ies(const u8 *buf, size_t len,
+ struct wpa_eapol_ie_parse *ie)
+{
+ return wpa_parse_kde_ies(buf, len, ie);
+}
+
+
+int wpa_cipher_key_len(int cipher);
+int wpa_cipher_rsc_len(int cipher);
+enum wpa_alg wpa_cipher_to_alg(int cipher);
+int wpa_cipher_valid_group(int cipher);
+int wpa_cipher_valid_pairwise(int cipher);
+int wpa_cipher_valid_mgmt_group(int cipher);
+u32 wpa_cipher_to_suite(int proto, int cipher);
+int rsn_cipher_put_suites(u8 *pos, int ciphers);
+int wpa_cipher_put_suites(u8 *pos, int ciphers);
+int wpa_pick_pairwise_cipher(int ciphers, int none_allowed);
+int wpa_pick_group_cipher(int ciphers);
+int wpa_parse_cipher(const char *value);
+int wpa_write_ciphers(char *start, char *end, int ciphers, const char *delim);
+int wpa_select_ap_group_cipher(int wpa, int wpa_pairwise, int rsn_pairwise);
+unsigned int wpa_mic_len(int akmp, size_t pmk_len);
+int wpa_use_akm_defined(int akmp);
+int wpa_use_cmac(int akmp);
+int wpa_use_aes_key_wrap(int akmp);
+int fils_domain_name_hash(const char *domain, u8 *hash);
+
+int pasn_pmk_to_ptk(const u8 *pmk, size_t pmk_len,
+ const u8 *spa, const u8 *bssid,
+ const u8 *dhss, size_t dhss_len,
+ struct wpa_ptk *ptk, int akmp, int cipher,
+ size_t kdk_len);
+
+u8 pasn_mic_len(int akmp, int cipher);
+
+int pasn_mic(const u8 *kck, int akmp, int cipher,
+ const u8 *addr1, const u8 *addr2,
+ const u8 *data, size_t data_len,
+ const u8 *frame, size_t frame_len, u8 *mic);
+
+int pasn_auth_frame_hash(int akmp, int cipher, const u8 *data, size_t len,
+ u8 *hash);
+
+void wpa_pasn_build_auth_header(struct wpabuf *buf, const u8 *bssid,
+ const u8 *src, const u8 *dst,
+ u8 trans_seq, u16 status);
+
+int wpa_pasn_add_rsne(struct wpabuf *buf, const u8 *pmkid,
+ int akmp, int cipher);
+
+void wpa_pasn_add_parameter_ie(struct wpabuf *buf, u16 pasn_group,
+ u8 wrapped_data_format,
+ const struct wpabuf *pubkey, bool compressed,
+ const struct wpabuf *comeback, int after);
+
+int wpa_pasn_add_wrapped_data(struct wpabuf *buf,
+ struct wpabuf *wrapped_data_buf);
+
+int wpa_pasn_validate_rsne(const struct wpa_ie_data *data);
+int wpa_pasn_parse_parameter_ie(const u8 *data, u8 len, bool from_ap,
+ struct wpa_pasn_params_data *pasn_params);
+
+void wpa_pasn_add_rsnxe(struct wpabuf *buf, u16 capab);
+
+#endif /* WPA_COMMON_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/wpa_ctrl.h b/ap/app/wpa_supplicant-2.10/src/common/wpa_ctrl.h
new file mode 100755
index 0000000..2c7ec04
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/wpa_ctrl.h
@@ -0,0 +1,641 @@
+/*
+ * wpa_supplicant/hostapd control interface library
+ * Copyright (c) 2004-2017, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPA_CTRL_H
+#define WPA_CTRL_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* wpa_supplicant control interface - fixed message prefixes */
+
+/** Interactive request for identity/password/pin */
+#define WPA_CTRL_REQ "CTRL-REQ-"
+
+/** Response to identity/password/pin request */
+#define WPA_CTRL_RSP "CTRL-RSP-"
+
+/* Event messages with fixed prefix */
+/** Authentication completed successfully and data connection enabled */
+#define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED "
+/** Disconnected, data connection is not available */
+#define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED "
+/** Association rejected during connection attempt */
+#define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT "
+/** Authentication rejected during connection attempt */
+#define WPA_EVENT_AUTH_REJECT "CTRL-EVENT-AUTH-REJECT "
+/** wpa_supplicant is exiting */
+#define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING "
+/** Password change was completed successfully */
+#define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED "
+/** EAP-Request/Notification received */
+#define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION "
+/** EAP authentication started (EAP-Request/Identity received) */
+#define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED "
+/** EAP method proposed by the server */
+#define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD "
+/** EAP method selected */
+#define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD "
+/** EAP peer certificate from TLS */
+#define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT "
+/** EAP peer certificate alternative subject name component from TLS */
+#define WPA_EVENT_EAP_PEER_ALT "CTRL-EVENT-EAP-PEER-ALT "
+/** EAP TLS certificate chain validation error */
+#define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR "
+/** EAP status */
+#define WPA_EVENT_EAP_STATUS "CTRL-EVENT-EAP-STATUS "
+/** Retransmit the previous request packet */
+#define WPA_EVENT_EAP_RETRANSMIT "CTRL-EVENT-EAP-RETRANSMIT "
+#define WPA_EVENT_EAP_RETRANSMIT2 "CTRL-EVENT-EAP-RETRANSMIT2 "
+/** EAP authentication completed successfully */
+#define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS "
+#define WPA_EVENT_EAP_SUCCESS2 "CTRL-EVENT-EAP-SUCCESS2 "
+/** EAP authentication failed (EAP-Failure received) */
+#define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE "
+#define WPA_EVENT_EAP_FAILURE2 "CTRL-EVENT-EAP-FAILURE2 "
+/** EAP authentication failed due to no response received */
+#define WPA_EVENT_EAP_TIMEOUT_FAILURE "CTRL-EVENT-EAP-TIMEOUT-FAILURE "
+#define WPA_EVENT_EAP_TIMEOUT_FAILURE2 "CTRL-EVENT-EAP-TIMEOUT-FAILURE2 "
+#define WPA_EVENT_EAP_ERROR_CODE "EAP-ERROR-CODE "
+/** Network block temporarily disabled (e.g., due to authentication failure) */
+#define WPA_EVENT_TEMP_DISABLED "CTRL-EVENT-SSID-TEMP-DISABLED "
+/** Temporarily disabled network block re-enabled */
+#define WPA_EVENT_REENABLED "CTRL-EVENT-SSID-REENABLED "
+/** New scan started */
+#define WPA_EVENT_SCAN_STARTED "CTRL-EVENT-SCAN-STARTED "
+/** New scan results available */
+#define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS "
+/** Scan command failed */
+#define WPA_EVENT_SCAN_FAILED "CTRL-EVENT-SCAN-FAILED "
+/** wpa_supplicant state change */
+#define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE "
+/** A new BSS entry was added (followed by BSS entry id and BSSID) */
+#define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED "
+/** A BSS entry was removed (followed by BSS entry id and BSSID) */
+#define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED "
+/** No suitable network was found */
+#define WPA_EVENT_NETWORK_NOT_FOUND "CTRL-EVENT-NETWORK-NOT-FOUND "
+/** Change in the signal level was reported by the driver */
+#define WPA_EVENT_SIGNAL_CHANGE "CTRL-EVENT-SIGNAL-CHANGE "
+/** Beacon loss reported by the driver */
+#define WPA_EVENT_BEACON_LOSS "CTRL-EVENT-BEACON-LOSS "
+/** Regulatory domain channel */
+#define WPA_EVENT_REGDOM_CHANGE "CTRL-EVENT-REGDOM-CHANGE "
+/** Channel switch started (followed by freq=<MHz> and other channel parameters)
+ */
+#define WPA_EVENT_CHANNEL_SWITCH_STARTED "CTRL-EVENT-STARTED-CHANNEL-SWITCH "
+/** Channel switch (followed by freq=<MHz> and other channel parameters) */
+#define WPA_EVENT_CHANNEL_SWITCH "CTRL-EVENT-CHANNEL-SWITCH "
+/** SAE authentication failed due to unknown password identifier */
+#define WPA_EVENT_SAE_UNKNOWN_PASSWORD_IDENTIFIER \
+ "CTRL-EVENT-SAE-UNKNOWN-PASSWORD-IDENTIFIER "
+/** Unprotected Beacon frame dropped */
+#define WPA_EVENT_UNPROT_BEACON "CTRL-EVENT-UNPROT-BEACON "
+/** Decision made to do a within-ESS roam */
+#define WPA_EVENT_DO_ROAM "CTRL-EVENT-DO-ROAM "
+/** Decision made to skip a within-ESS roam */
+#define WPA_EVENT_SKIP_ROAM "CTRL-EVENT-SKIP-ROAM "
+
+/** IP subnet status change notification
+ *
+ * When using an offloaded roaming mechanism where driver/firmware takes care
+ * of roaming and IP subnet validation checks post-roaming, this event can
+ * indicate whether IP subnet has changed.
+ *
+ * The event has a status=<0/1/2> parameter where
+ * 0 = unknown
+ * 1 = IP subnet unchanged (can continue to use the old IP address)
+ * 2 = IP subnet changed (need to get a new IP address)
+ */
+#define WPA_EVENT_SUBNET_STATUS_UPDATE "CTRL-EVENT-SUBNET-STATUS-UPDATE "
+
+/** RSN IBSS 4-way handshakes completed with specified peer */
+#define IBSS_RSN_COMPLETED "IBSS-RSN-COMPLETED "
+
+/** Notification of frequency conflict due to a concurrent operation.
+ *
+ * The indicated network is disabled and needs to be re-enabled before it can
+ * be used again.
+ */
+#define WPA_EVENT_FREQ_CONFLICT "CTRL-EVENT-FREQ-CONFLICT "
+/** Frequency ranges that the driver recommends to avoid */
+#define WPA_EVENT_AVOID_FREQ "CTRL-EVENT-AVOID-FREQ "
+/** A new network profile was added (followed by network entry id) */
+#define WPA_EVENT_NETWORK_ADDED "CTRL-EVENT-NETWORK-ADDED "
+/** A network profile was removed (followed by prior network entry id) */
+#define WPA_EVENT_NETWORK_REMOVED "CTRL-EVENT-NETWORK-REMOVED "
+/** Result of MSCS setup */
+#define WPA_EVENT_MSCS_RESULT "CTRL-EVENT-MSCS-RESULT "
+/** WPS overlap detected in PBC mode */
+#define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED "
+/** Available WPS AP with active PBC found in scan results */
+#define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC "
+/** Available WPS AP with our address as authorized in scan results */
+#define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH "
+/** Available WPS AP with recently selected PIN registrar found in scan results
+ */
+#define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN "
+/** Available WPS AP found in scan results */
+#define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE "
+/** A new credential received */
+#define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED "
+/** M2D received */
+#define WPS_EVENT_M2D "WPS-M2D "
+/** WPS registration failed after M2/M2D */
+#define WPS_EVENT_FAIL "WPS-FAIL "
+/** WPS registration completed successfully */
+#define WPS_EVENT_SUCCESS "WPS-SUCCESS "
+/** WPS enrollment attempt timed out and was terminated */
+#define WPS_EVENT_TIMEOUT "WPS-TIMEOUT "
+/* PBC mode was activated */
+#define WPS_EVENT_ACTIVE "WPS-PBC-ACTIVE "
+/* PBC mode was disabled */
+#define WPS_EVENT_DISABLE "WPS-PBC-DISABLE "
+
+#define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN "
+
+#define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK "
+/** Result of SCS setup */
+#define WPA_EVENT_SCS_RESULT "CTRL-EVENT-SCS-RESULT "
+/* Event indicating DSCP policy */
+#define WPA_EVENT_DSCP_POLICY "CTRL-EVENT-DSCP-POLICY "
+
+/* WPS ER events */
+#define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD "
+#define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE "
+#define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD "
+#define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE "
+#define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS "
+#define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG "
+
+/* DPP events */
+#define DPP_EVENT_AUTH_SUCCESS "DPP-AUTH-SUCCESS "
+#define DPP_EVENT_AUTH_INIT_FAILED "DPP-AUTH-INIT-FAILED "
+#define DPP_EVENT_NOT_COMPATIBLE "DPP-NOT-COMPATIBLE "
+#define DPP_EVENT_RESPONSE_PENDING "DPP-RESPONSE-PENDING "
+#define DPP_EVENT_SCAN_PEER_QR_CODE "DPP-SCAN-PEER-QR-CODE "
+#define DPP_EVENT_AUTH_DIRECTION "DPP-AUTH-DIRECTION "
+#define DPP_EVENT_CONF_RECEIVED "DPP-CONF-RECEIVED "
+#define DPP_EVENT_CONF_SENT "DPP-CONF-SENT "
+#define DPP_EVENT_CONF_FAILED "DPP-CONF-FAILED "
+#define DPP_EVENT_CONN_STATUS_RESULT "DPP-CONN-STATUS-RESULT "
+#define DPP_EVENT_CONFOBJ_AKM "DPP-CONFOBJ-AKM "
+#define DPP_EVENT_CONFOBJ_SSID "DPP-CONFOBJ-SSID "
+#define DPP_EVENT_CONFOBJ_SSID_CHARSET "DPP-CONFOBJ-SSID-CHARSET "
+#define DPP_EVENT_CONFOBJ_PASS "DPP-CONFOBJ-PASS "
+#define DPP_EVENT_CONFOBJ_PSK "DPP-CONFOBJ-PSK "
+#define DPP_EVENT_CONNECTOR "DPP-CONNECTOR "
+#define DPP_EVENT_C_SIGN_KEY "DPP-C-SIGN-KEY "
+#define DPP_EVENT_PP_KEY "DPP-PP-KEY "
+#define DPP_EVENT_NET_ACCESS_KEY "DPP-NET-ACCESS-KEY "
+#define DPP_EVENT_SERVER_NAME "DPP-SERVER-NAME "
+#define DPP_EVENT_CERTBAG "DPP-CERTBAG "
+#define DPP_EVENT_CACERT "DPP-CACERT "
+#define DPP_EVENT_MISSING_CONNECTOR "DPP-MISSING-CONNECTOR "
+#define DPP_EVENT_NETWORK_ID "DPP-NETWORK-ID "
+#define DPP_EVENT_CONFIGURATOR_ID "DPP-CONFIGURATOR-ID "
+#define DPP_EVENT_RX "DPP-RX "
+#define DPP_EVENT_TX "DPP-TX "
+#define DPP_EVENT_TX_STATUS "DPP-TX-STATUS "
+#define DPP_EVENT_FAIL "DPP-FAIL "
+#define DPP_EVENT_PKEX_T_LIMIT "DPP-PKEX-T-LIMIT "
+#define DPP_EVENT_INTRO "DPP-INTRO "
+#define DPP_EVENT_CONF_REQ_RX "DPP-CONF-REQ-RX "
+#define DPP_EVENT_CHIRP_STOPPED "DPP-CHIRP-STOPPED "
+#define DPP_EVENT_MUD_URL "DPP-MUD-URL "
+#define DPP_EVENT_BAND_SUPPORT "DPP-BAND-SUPPORT "
+#define DPP_EVENT_CSR "DPP-CSR "
+#define DPP_EVENT_CHIRP_RX "DPP-CHIRP-RX "
+
+/* MESH events */
+#define MESH_GROUP_STARTED "MESH-GROUP-STARTED "
+#define MESH_GROUP_REMOVED "MESH-GROUP-REMOVED "
+#define MESH_PEER_CONNECTED "MESH-PEER-CONNECTED "
+#define MESH_PEER_DISCONNECTED "MESH-PEER-DISCONNECTED "
+/** Mesh SAE authentication failure. Wrong password suspected. */
+#define MESH_SAE_AUTH_FAILURE "MESH-SAE-AUTH-FAILURE "
+#define MESH_SAE_AUTH_BLOCKED "MESH-SAE-AUTH-BLOCKED "
+
+/* WMM AC events */
+#define WMM_AC_EVENT_TSPEC_ADDED "TSPEC-ADDED "
+#define WMM_AC_EVENT_TSPEC_REMOVED "TSPEC-REMOVED "
+#define WMM_AC_EVENT_TSPEC_REQ_FAILED "TSPEC-REQ-FAILED "
+
+/** P2P device found */
+#define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND "
+
+/** P2P device lost */
+#define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST "
+
+/** A P2P device requested GO negotiation, but we were not ready to start the
+ * negotiation */
+#define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST "
+#define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS "
+#define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE "
+#define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS "
+#define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE "
+#define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED "
+#define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED "
+#define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE "
+#define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE "
+/* parameters: <peer address> <PIN> */
+#define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN "
+/* parameters: <peer address> */
+#define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN "
+/* parameters: <peer address> */
+#define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ "
+/* parameters: <peer address> */
+#define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP "
+/* parameters: <peer address> <status> */
+#define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE"
+/* parameters: <freq> <src addr> <dialog token> <update indicator> <TLVs> */
+#define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ "
+/* parameters: <src addr> <update indicator> <TLVs> */
+#define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP "
+#define P2P_EVENT_SERV_ASP_RESP "P2P-SERV-ASP-RESP "
+#define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED "
+#define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT "
+#define P2P_EVENT_INVITATION_ACCEPTED "P2P-INVITATION-ACCEPTED "
+#define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED "
+#define P2P_EVENT_PERSISTENT_PSK_FAIL "P2P-PERSISTENT-PSK-FAIL id="
+#define P2P_EVENT_PRESENCE_RESPONSE "P2P-PRESENCE-RESPONSE "
+#define P2P_EVENT_NFC_BOTH_GO "P2P-NFC-BOTH-GO "
+#define P2P_EVENT_NFC_PEER_CLIENT "P2P-NFC-PEER-CLIENT "
+#define P2P_EVENT_NFC_WHILE_CLIENT "P2P-NFC-WHILE-CLIENT "
+#define P2P_EVENT_FALLBACK_TO_GO_NEG "P2P-FALLBACK-TO-GO-NEG "
+#define P2P_EVENT_FALLBACK_TO_GO_NEG_ENABLED "P2P-FALLBACK-TO-GO-NEG-ENABLED "
+
+/* parameters: <PMF enabled> <timeout in ms> <Session Information URL> */
+#define ESS_DISASSOC_IMMINENT "ESS-DISASSOC-IMMINENT "
+#define P2P_EVENT_REMOVE_AND_REFORM_GROUP "P2P-REMOVE-AND-REFORM-GROUP "
+
+#define P2P_EVENT_P2PS_PROVISION_START "P2PS-PROV-START "
+#define P2P_EVENT_P2PS_PROVISION_DONE "P2PS-PROV-DONE "
+
+#define INTERWORKING_AP "INTERWORKING-AP "
+#define INTERWORKING_EXCLUDED "INTERWORKING-BLACKLISTED "
+#define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH "
+#define INTERWORKING_ALREADY_CONNECTED "INTERWORKING-ALREADY-CONNECTED "
+#define INTERWORKING_SELECTED "INTERWORKING-SELECTED "
+
+/* Credential block added; parameters: <id> */
+#define CRED_ADDED "CRED-ADDED "
+/* Credential block modified; parameters: <id> <field> */
+#define CRED_MODIFIED "CRED-MODIFIED "
+/* Credential block removed; parameters: <id> */
+#define CRED_REMOVED "CRED-REMOVED "
+
+#define GAS_RESPONSE_INFO "GAS-RESPONSE-INFO "
+/* parameters: <addr> <dialog_token> <freq> */
+#define GAS_QUERY_START "GAS-QUERY-START "
+/* parameters: <addr> <dialog_token> <freq> <status_code> <result> */
+#define GAS_QUERY_DONE "GAS-QUERY-DONE "
+
+/* parameters: <addr> <result> */
+#define ANQP_QUERY_DONE "ANQP-QUERY-DONE "
+
+#define RX_ANQP "RX-ANQP "
+#define RX_HS20_ANQP "RX-HS20-ANQP "
+#define RX_HS20_ANQP_ICON "RX-HS20-ANQP-ICON "
+#define RX_HS20_ICON "RX-HS20-ICON "
+#define RX_MBO_ANQP "RX-MBO-ANQP "
+
+/* parameters: <Venue Number> <Venue URL> */
+#define RX_VENUE_URL "RX-VENUE-URL "
+
+#define HS20_SUBSCRIPTION_REMEDIATION "HS20-SUBSCRIPTION-REMEDIATION "
+#define HS20_DEAUTH_IMMINENT_NOTICE "HS20-DEAUTH-IMMINENT-NOTICE "
+#define HS20_T_C_ACCEPTANCE "HS20-T-C-ACCEPTANCE "
+
+#define EXT_RADIO_WORK_START "EXT-RADIO-WORK-START "
+#define EXT_RADIO_WORK_TIMEOUT "EXT-RADIO-WORK-TIMEOUT "
+
+#define RRM_EVENT_NEIGHBOR_REP_RXED "RRM-NEIGHBOR-REP-RECEIVED "
+#define RRM_EVENT_NEIGHBOR_REP_FAILED "RRM-NEIGHBOR-REP-REQUEST-FAILED "
+
+/* hostapd control interface - fixed message prefixes */
+#define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED "
+#define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS "
+#define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS "
+#define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED "
+#define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED "
+#define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED "
+#define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED "
+#define WPS_EVENT_PIN_ACTIVE "WPS-PIN-ACTIVE "
+#define WPS_EVENT_CANCEL "WPS-CANCEL "
+#define AP_STA_CONNECTED "AP-STA-CONNECTED "
+#define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED "
+#define AP_STA_POSSIBLE_PSK_MISMATCH "AP-STA-POSSIBLE-PSK-MISMATCH "
+#define AP_STA_POLL_OK "AP-STA-POLL-OK "
+
+#define AP_REJECTED_MAX_STA "AP-REJECTED-MAX-STA "
+#define AP_REJECTED_BLOCKED_STA "AP-REJECTED-BLOCKED-STA "
+
+#define HS20_T_C_FILTERING_ADD "HS20-T-C-FILTERING-ADD "
+#define HS20_T_C_FILTERING_REMOVE "HS20-T-C-FILTERING-REMOVE "
+
+#define AP_EVENT_ENABLED "AP-ENABLED "
+#define AP_EVENT_DISABLED "AP-DISABLED "
+
+#define INTERFACE_ENABLED "INTERFACE-ENABLED "
+#define INTERFACE_DISABLED "INTERFACE-DISABLED "
+
+#define ACS_EVENT_STARTED "ACS-STARTED "
+#define ACS_EVENT_COMPLETED "ACS-COMPLETED "
+#define ACS_EVENT_FAILED "ACS-FAILED "
+
+#define DFS_EVENT_RADAR_DETECTED "DFS-RADAR-DETECTED "
+#define DFS_EVENT_NEW_CHANNEL "DFS-NEW-CHANNEL "
+#define DFS_EVENT_CAC_START "DFS-CAC-START "
+#define DFS_EVENT_CAC_COMPLETED "DFS-CAC-COMPLETED "
+#define DFS_EVENT_NOP_FINISHED "DFS-NOP-FINISHED "
+#define DFS_EVENT_PRE_CAC_EXPIRED "DFS-PRE-CAC-EXPIRED "
+
+#define AP_CSA_FINISHED "AP-CSA-FINISHED "
+
+#define P2P_EVENT_LISTEN_OFFLOAD_STOP "P2P-LISTEN-OFFLOAD-STOPPED "
+#define P2P_LISTEN_OFFLOAD_STOP_REASON "P2P-LISTEN-OFFLOAD-STOP-REASON "
+
+/* BSS Transition Management Response frame received */
+#define BSS_TM_RESP "BSS-TM-RESP "
+
+/* Collocated Interference Request frame received;
+ * parameters: <dialog token> <automatic report enabled> <report timeout> */
+#define COLOC_INTF_REQ "COLOC-INTF-REQ "
+/* Collocated Interference Report frame received;
+ * parameters: <STA address> <dialog token> <hexdump of report elements> */
+#define COLOC_INTF_REPORT "COLOC-INTF-REPORT "
+
+/* MBO IE with cellular data connection preference received */
+#define MBO_CELL_PREFERENCE "MBO-CELL-PREFERENCE "
+
+/* BSS Transition Management Request received with MBO transition reason */
+#define MBO_TRANSITION_REASON "MBO-TRANSITION-REASON "
+
+/* parameters: <STA address> <dialog token> <ack=0/1> */
+#define BEACON_REQ_TX_STATUS "BEACON-REQ-TX-STATUS "
+/* parameters: <STA address> <dialog token> <report mode> <beacon report> */
+#define BEACON_RESP_RX "BEACON-RESP-RX "
+
+/* PMKSA cache entry added; parameters: <BSSID> <network_id> */
+#define PMKSA_CACHE_ADDED "PMKSA-CACHE-ADDED "
+/* PMKSA cache entry removed; parameters: <BSSID> <network_id> */
+#define PMKSA_CACHE_REMOVED "PMKSA-CACHE-REMOVED "
+
+/* FILS HLP Container receive; parameters: dst=<addr> src=<addr> frame=<hexdump>
+ */
+#define FILS_HLP_RX "FILS-HLP-RX "
+
+/* Event to indicate Probe Request frame;
+ * parameters: sa=<STA MAC address> signal=<signal> */
+#define RX_PROBE_REQUEST "RX-PROBE-REQUEST "
+
+/* Event to indicate station's HT/VHT operation mode change information */
+#define STA_OPMODE_MAX_BW_CHANGED "STA-OPMODE-MAX-BW-CHANGED "
+#define STA_OPMODE_SMPS_MODE_CHANGED "STA-OPMODE-SMPS-MODE-CHANGED "
+#define STA_OPMODE_N_SS_CHANGED "STA-OPMODE-N_SS-CHANGED "
+
+/* New interface addition or removal for 4addr WDS SDA */
+#define WDS_STA_INTERFACE_ADDED "WDS-STA-INTERFACE-ADDED "
+#define WDS_STA_INTERFACE_REMOVED "WDS-STA-INTERFACE-REMOVED "
+
+/* Transition mode disabled indication - followed by bitmap */
+#define TRANSITION_DISABLE "TRANSITION-DISABLE "
+
+/* OCV validation failure; parameters: addr=<src addr>
+ * frame=<saqueryreq/saqueryresp> error=<error string> */
+#define OCV_FAILURE "OCV-FAILURE "
+
+/* Event triggered for received management frame */
+#define AP_MGMT_FRAME_RECEIVED "AP-MGMT-FRAME-RECEIVED "
+
+#ifndef BIT
+#define BIT(x) (1U << (x))
+#endif
+
+/* PASN authentication status */
+#define PASN_AUTH_STATUS "PASN-AUTH-STATUS "
+
+/* BSS command information masks */
+
+#define WPA_BSS_MASK_ALL 0xFFFDFFFF
+#define WPA_BSS_MASK_ID BIT(0)
+#define WPA_BSS_MASK_BSSID BIT(1)
+#define WPA_BSS_MASK_FREQ BIT(2)
+#define WPA_BSS_MASK_BEACON_INT BIT(3)
+#define WPA_BSS_MASK_CAPABILITIES BIT(4)
+#define WPA_BSS_MASK_QUAL BIT(5)
+#define WPA_BSS_MASK_NOISE BIT(6)
+#define WPA_BSS_MASK_LEVEL BIT(7)
+#define WPA_BSS_MASK_TSF BIT(8)
+#define WPA_BSS_MASK_AGE BIT(9)
+#define WPA_BSS_MASK_IE BIT(10)
+#define WPA_BSS_MASK_FLAGS BIT(11)
+#define WPA_BSS_MASK_SSID BIT(12)
+#define WPA_BSS_MASK_WPS_SCAN BIT(13)
+#define WPA_BSS_MASK_P2P_SCAN BIT(14)
+#define WPA_BSS_MASK_INTERNETW BIT(15)
+#define WPA_BSS_MASK_WIFI_DISPLAY BIT(16)
+#define WPA_BSS_MASK_DELIM BIT(17)
+#define WPA_BSS_MASK_MESH_SCAN BIT(18)
+#define WPA_BSS_MASK_SNR BIT(19)
+#define WPA_BSS_MASK_EST_THROUGHPUT BIT(20)
+#define WPA_BSS_MASK_FST BIT(21)
+#define WPA_BSS_MASK_UPDATE_IDX BIT(22)
+#define WPA_BSS_MASK_BEACON_IE BIT(23)
+#define WPA_BSS_MASK_FILS_INDICATION BIT(24)
+
+
+/* VENDOR_ELEM_* frame id values */
+enum wpa_vendor_elem_frame {
+ VENDOR_ELEM_PROBE_REQ_P2P = 0,
+ VENDOR_ELEM_PROBE_RESP_P2P = 1,
+ VENDOR_ELEM_PROBE_RESP_P2P_GO = 2,
+ VENDOR_ELEM_BEACON_P2P_GO = 3,
+ VENDOR_ELEM_P2P_PD_REQ = 4,
+ VENDOR_ELEM_P2P_PD_RESP = 5,
+ VENDOR_ELEM_P2P_GO_NEG_REQ = 6,
+ VENDOR_ELEM_P2P_GO_NEG_RESP = 7,
+ VENDOR_ELEM_P2P_GO_NEG_CONF = 8,
+ VENDOR_ELEM_P2P_INV_REQ = 9,
+ VENDOR_ELEM_P2P_INV_RESP = 10,
+ VENDOR_ELEM_P2P_ASSOC_REQ = 11,
+ VENDOR_ELEM_P2P_ASSOC_RESP = 12,
+ VENDOR_ELEM_ASSOC_REQ = 13,
+ VENDOR_ELEM_PROBE_REQ = 14,
+ NUM_VENDOR_ELEM_FRAMES
+};
+
+
+/* wpa_supplicant/hostapd control interface access */
+
+/**
+ * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd
+ * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
+ * Returns: Pointer to abstract control interface data or %NULL on failure
+ *
+ * This function is used to open a control interface to wpa_supplicant/hostapd.
+ * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path
+ * is configured in wpa_supplicant/hostapd and other programs using the control
+ * interface need to use matching path configuration.
+ */
+struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path);
+
+/**
+ * wpa_ctrl_open2 - Open a control interface to wpa_supplicant/hostapd
+ * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
+ * @cli_path: Path for client UNIX domain sockets; ignored if UDP socket
+ * is used.
+ * Returns: Pointer to abstract control interface data or %NULL on failure
+ *
+ * This function is used to open a control interface to wpa_supplicant/hostapd
+ * when the socket path for client need to be specified explicitly. Default
+ * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd and client
+ * socket path is /tmp.
+ */
+struct wpa_ctrl * wpa_ctrl_open2(const char *ctrl_path, const char *cli_path);
+
+
+/**
+ * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd
+ * @ctrl: Control interface data from wpa_ctrl_open()
+ *
+ * This function is used to close a control interface.
+ */
+void wpa_ctrl_close(struct wpa_ctrl *ctrl);
+
+
+/**
+ * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd
+ * @ctrl: Control interface data from wpa_ctrl_open()
+ * @cmd: Command; usually, ASCII text, e.g., "PING"
+ * @cmd_len: Length of the cmd in bytes
+ * @reply: Buffer for the response
+ * @reply_len: Reply buffer length
+ * @msg_cb: Callback function for unsolicited messages or %NULL if not used
+ * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout
+ *
+ * This function is used to send commands to wpa_supplicant/hostapd. Received
+ * response will be written to reply and reply_len is set to the actual length
+ * of the reply. This function will block for up to 10 seconds while waiting
+ * for the reply. If unsolicited messages are received, the blocking time may
+ * be longer.
+ *
+ * msg_cb can be used to register a callback function that will be called for
+ * unsolicited messages received while waiting for the command response. These
+ * messages may be received if wpa_ctrl_request() is called at the same time as
+ * wpa_supplicant/hostapd is sending such a message. This can happen only if
+ * the program has used wpa_ctrl_attach() to register itself as a monitor for
+ * event messages. Alternatively to msg_cb, programs can register two control
+ * interface connections and use one of them for commands and the other one for
+ * receiving event messages, in other words, call wpa_ctrl_attach() only for
+ * the control interface connection that will be used for event messages.
+ */
+int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len,
+ char *reply, size_t *reply_len,
+ void (*msg_cb)(char *msg, size_t len));
+
+
+/**
+ * wpa_ctrl_attach - Register as an event monitor for the control interface
+ * @ctrl: Control interface data from wpa_ctrl_open()
+ * Returns: 0 on success, -1 on failure, -2 on timeout
+ *
+ * This function registers the control interface connection as a monitor for
+ * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the
+ * control interface connection starts receiving event messages that can be
+ * read with wpa_ctrl_recv().
+ */
+int wpa_ctrl_attach(struct wpa_ctrl *ctrl);
+
+
+/**
+ * wpa_ctrl_detach - Unregister event monitor from the control interface
+ * @ctrl: Control interface data from wpa_ctrl_open()
+ * Returns: 0 on success, -1 on failure, -2 on timeout
+ *
+ * This function unregisters the control interface connection as a monitor for
+ * wpa_supplicant/hostapd events, i.e., cancels the registration done with
+ * wpa_ctrl_attach().
+ */
+int wpa_ctrl_detach(struct wpa_ctrl *ctrl);
+
+
+/**
+ * wpa_ctrl_recv - Receive a pending control interface message
+ * @ctrl: Control interface data from wpa_ctrl_open()
+ * @reply: Buffer for the message data
+ * @reply_len: Length of the reply buffer
+ * Returns: 0 on success, -1 on failure
+ *
+ * This function will receive a pending control interface message. The received
+ * response will be written to reply and reply_len is set to the actual length
+ * of the reply.
+
+ * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach()
+ * must have been used to register the control interface as an event monitor.
+ */
+int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len);
+
+
+/**
+ * wpa_ctrl_pending - Check whether there are pending event messages
+ * @ctrl: Control interface data from wpa_ctrl_open()
+ * Returns: 1 if there are pending messages, 0 if no, or -1 on error
+ *
+ * This function will check whether there are any pending control interface
+ * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is
+ * only used for event messages, i.e., wpa_ctrl_attach() must have been used to
+ * register the control interface as an event monitor.
+ */
+int wpa_ctrl_pending(struct wpa_ctrl *ctrl);
+
+
+/**
+ * wpa_ctrl_get_fd - Get file descriptor used by the control interface
+ * @ctrl: Control interface data from wpa_ctrl_open()
+ * Returns: File descriptor used for the connection
+ *
+ * This function can be used to get the file descriptor that is used for the
+ * control interface connection. The returned value can be used, e.g., with
+ * select() while waiting for multiple events.
+ *
+ * The returned file descriptor must not be used directly for sending or
+ * receiving packets; instead, the library functions wpa_ctrl_request() and
+ * wpa_ctrl_recv() must be used for this.
+ */
+int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl);
+
+#ifdef ANDROID
+/**
+ * wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that
+ * may be left over from clients that were previously connected to
+ * wpa_supplicant. This keeps these files from being orphaned in the
+ * event of crashes that prevented them from being removed as part
+ * of the normal orderly shutdown.
+ */
+void wpa_ctrl_cleanup(void);
+#endif /* ANDROID */
+
+#ifdef CONFIG_CTRL_IFACE_UDP
+/* Port range for multiple wpa_supplicant instances and multiple VIFs */
+#define WPA_CTRL_IFACE_PORT 9877
+#define WPA_CTRL_IFACE_PORT_LIMIT 50 /* decremented from start */
+#define WPA_GLOBAL_CTRL_IFACE_PORT 9878
+#define WPA_GLOBAL_CTRL_IFACE_PORT_LIMIT 20 /* incremented from start */
+
+char * wpa_ctrl_get_remote_ifname(struct wpa_ctrl *ctrl);
+#endif /* CONFIG_CTRL_IFACE_UDP */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* WPA_CTRL_H */
diff --git a/ap/app/wpa_supplicant-2.10/src/common/wpa_helpers.h b/ap/app/wpa_supplicant-2.10/src/common/wpa_helpers.h
new file mode 100755
index 0000000..54c2872
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/src/common/wpa_helpers.h
@@ -0,0 +1,37 @@
+/*
+ * wpa_supplicant ctrl_iface helpers
+ * Copyright (c) 2010-2011, Atheros Communications, Inc.
+ * Copyright (c) 2011-2012, Qualcomm Atheros, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPA_HELPERS_H
+#define WPA_HELPERS_H
+
+int wpa_command(const char *ifname, const char *cmd);
+int wpa_command_resp(const char *ifname, const char *cmd,
+ char *resp, size_t resp_size);
+int get_wpa_status(const char *ifname, const char *field, char *obuf,
+ size_t obuf_size);
+
+struct wpa_ctrl * open_wpa_mon(const char *ifname);
+int wait_ip_addr(const char *ifname, int timeout);
+int get_wpa_cli_event(struct wpa_ctrl *mon,
+ const char *event, char *buf, size_t buf_size);
+int get_wpa_cli_event2(struct wpa_ctrl *mon,
+ const char *event, const char *event2,
+ char *buf, size_t buf_size);
+
+int add_network(const char *ifname);
+int set_network(const char *ifname, int id, const char *field,
+ const char *value);
+int set_network_quoted(const char *ifname, int id, const char *field,
+ const char *value);
+int add_cred(const char *ifname);
+int set_cred(const char *ifname, int id, const char *field, const char *value);
+int set_cred_quoted(const char *ifname, int id, const char *field,
+ const char *value);
+
+#endif /* WPA_HELPERS_H */