[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/.config b/ap/app/wpa_supplicant-2.10/wpa_supplicant/.config
new file mode 100755
index 0000000..734a955
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/.config
@@ -0,0 +1,550 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+CFLAGS += -I$(zte_lib_path)/libssl/install/include
+LIBS += -L$(zte_lib_path)/libssl/install/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+CFLAGS += -I$(zte_lib_path)/libnl/install/include/libnl3
+LIBS += -L$(zte_lib_path)/libnl/install/lib
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for wired Ethernet drivers
+#CONFIG_DRIVER_WIRED=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+#CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+#CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+#CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+#CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+#CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+#CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
+# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
+# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# EAP-GTC
+#CONFIG_EAP_GTC=y
+
+# EAP-OTP
+#CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=n
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+#CONFIG_EAP_EKE=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+#CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+#CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+#CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# udp6 = UDP IPv6 sockets using localhost (::1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+CONFIG_SAE=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+# path is given on command line, not here; this option is just used to
+# select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operating system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+#CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+#CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# Disable Linux packet socket workaround applicable for station interface
+# in a bridge for EAPOL frames. This should be uncommented only if the kernel
+# is known to not have the regression issue in packet socket behavior with
+# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
+#CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+#CONFIG_TLS=openssl
+#CONFIG_TLS_ADD_DL=y
+CONFIG_TLS=wolfssl
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+#CONFIG_TLSV12=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for old DBus control interface
+# (fi.epitest.hostap.WPASupplicant)
+#CONFIG_CTRL_IFACE_DBUS=y
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+#CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Add support for writing debug log to Android logcat instead of standard
+# output
+#CONFIG_ANDROID_LOG=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+#CONFIG_NO_RANDOM_POOL=y
+
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+# (depends on CONFIG_IEEE80211N)
+#CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable interface matching in wpa_supplicant
+#CONFIG_MATCH_IFACE=y
+
+# Disable roaming in wpa_supplicant
+#CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+#CONFIG_AP=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+#CONFIG_P2P=y
+
+# Enable TDLS support
+#CONFIG_TDLS=y
+
+# Wi-Fi Direct
+# This can be used to enable Wi-Fi Direct extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+#CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+#CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# OS X builds. This is only for building eapol_test.
+#CONFIG_OSX=y
+
+# Automatic Channel Selection
+# This will allow wpa_supplicant to pick the channel automatically when channel
+# is set to "0".
+#
+# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
+# to "channel=0". This would enable us to eventually add other ACS algorithms in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
+# a newly to create wpa_supplicant.conf variable acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#CONFIG_ACS=y
+
+# Support Multi Band Operation
+#CONFIG_MBO=y
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/ChangeLog b/ap/app/wpa_supplicant-2.10/wpa_supplicant/ChangeLog
new file mode 100755
index 0000000..efcc6cd
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/ChangeLog
@@ -0,0 +1,2500 @@
+ChangeLog for wpa_supplicant
+
+2022-01-16 - v2.10
+ * SAE changes
+ - improved protection against side channel attacks
+ [https://w1.fi/security/2022-1/]
+ - added support for the hash-to-element mechanism (sae_pwe=1 or
+ sae_pwe=2); this is currently disabled by default, but will likely
+ get enabled by default in the future
+ - fixed PMKSA caching with OKC
+ - added support for SAE-PK
+ * EAP-pwd changes
+ - improved protection against side channel attacks
+ [https://w1.fi/security/2022-1/]
+ * fixed P2P provision discovery processing of a specially constructed
+ invalid frame
+ [https://w1.fi/security/2021-1/]
+ * fixed P2P group information processing of a specially constructed
+ invalid frame
+ [https://w1.fi/security/2020-2/]
+ * fixed PMF disconnection protection bypass in AP mode
+ [https://w1.fi/security/2019-7/]
+ * added support for using OpenSSL 3.0
+ * increased the maximum number of EAP message exchanges (mainly to
+ support cases with very large certificates)
+ * fixed various issues in experimental support for EAP-TEAP peer
+ * added support for DPP release 2 (Wi-Fi Device Provisioning Protocol)
+ * a number of MKA/MACsec fixes and extensions
+ * added support for SAE (WPA3-Personal) AP mode configuration
+ * added P2P support for EDMG (IEEE 802.11ay) channels
+ * fixed EAP-FAST peer with TLS GCM/CCM ciphers
+ * improved throughput estimation and BSS selection
+ * dropped support for libnl 1.1
+ * added support for nl80211 control port for EAPOL frame TX/RX
+ * fixed OWE key derivation with groups 20 and 21; this breaks backwards
+ compatibility for these groups while the default group 19 remains
+ backwards compatible
+ * added support for Beacon protection
+ * added support for Extended Key ID for pairwise keys
+ * removed WEP support from the default build (CONFIG_WEP=y can be used
+ to enable it, if really needed)
+ * added a build option to remove TKIP support (CONFIG_NO_TKIP=y)
+ * added support for Transition Disable mechanism to allow the AP to
+ automatically disable transition mode to improve security
+ * extended D-Bus interface
+ * added support for PASN
+ * added a file-based backend for external password storage to allow
+ secret information to be moved away from the main configuration file
+ without requiring external tools
+ * added EAP-TLS peer support for TLS 1.3 (disabled by default for now)
+ * added support for SCS, MSCS, DSCP policy
+ * changed driver interface selection to default to automatic fallback
+ to other compiled in options
+ * a large number of other fixes, cleanup, and extensions
+
+2019-08-07 - v2.9
+ * SAE changes
+ - disable use of groups using Brainpool curves
+ - improved protection against side channel attacks
+ [https://w1.fi/security/2019-6/]
+ * EAP-pwd changes
+ - disable use of groups using Brainpool curves
+ - allow the set of groups to be configured (eap_pwd_groups)
+ - improved protection against side channel attacks
+ [https://w1.fi/security/2019-6/]
+ * fixed FT-EAP initial mobility domain association using PMKSA caching
+ (disabled by default for backwards compatibility; can be enabled
+ with ft_eap_pmksa_caching=1)
+ * fixed a regression in OpenSSL 1.1+ engine loading
+ * added validation of RSNE in (Re)Association Response frames
+ * fixed DPP bootstrapping URI parser of channel list
+ * extended EAP-SIM/AKA fast re-authentication to allow use with FILS
+ * extended ca_cert_blob to support PEM format
+ * improved robustness of P2P Action frame scheduling
+ * added support for EAP-SIM/AKA using anonymous@realm identity
+ * fixed Hotspot 2.0 credential selection based on roaming consortium
+ to ignore credentials without a specific EAP method
+ * added experimental support for EAP-TEAP peer (RFC 7170)
+ * added experimental support for EAP-TLS peer with TLS v1.3
+ * fixed a regression in WMM parameter configuration for a TDLS peer
+ * fixed a regression in operation with drivers that offload 802.1X
+ 4-way handshake
+ * fixed an ECDH operation corner case with OpenSSL
+
+2019-04-21 - v2.8
+ * SAE changes
+ - added support for SAE Password Identifier
+ - changed default configuration to enable only groups 19, 20, 21
+ (i.e., disable groups 25 and 26) and disable all unsuitable groups
+ completely based on REVmd changes
+ - do not regenerate PWE unnecessarily when the AP uses the
+ anti-clogging token mechanisms
+ - fixed some association cases where both SAE and FT-SAE were enabled
+ on both the station and the selected AP
+ - started to prefer FT-SAE over SAE AKM if both are enabled
+ - started to prefer FT-SAE over FT-PSK if both are enabled
+ - fixed FT-SAE when SAE PMKSA caching is used
+ - reject use of unsuitable groups based on new implementation guidance
+ in REVmd (allow only FFC groups with prime >= 3072 bits and ECC
+ groups with prime >= 256)
+ - minimize timing and memory use differences in PWE derivation
+ [https://w1.fi/security/2019-1/] (CVE-2019-9494)
+ * EAP-pwd changes
+ - minimize timing and memory use differences in PWE derivation
+ [https://w1.fi/security/2019-2/] (CVE-2019-9495)
+ - verify server scalar/element
+ [https://w1.fi/security/2019-4/] (CVE-2019-9499)
+ - fix message reassembly issue with unexpected fragment
+ [https://w1.fi/security/2019-5/]
+ - enforce rand,mask generation rules more strictly
+ - fix a memory leak in PWE derivation
+ - disallow ECC groups with a prime under 256 bits (groups 25, 26, and
+ 27)
+ * fixed CONFIG_IEEE80211R=y (FT) build without CONFIG_FILS=y
+ * Hotspot 2.0 changes
+ - do not indicate release number that is higher than the one
+ AP supports
+ - added support for release number 3
+ - enable PMF automatically for network profiles created from
+ credentials
+ * fixed OWE network profile saving
+ * fixed DPP network profile saving
+ * added support for RSN operating channel validation
+ (CONFIG_OCV=y and network profile parameter ocv=1)
+ * added Multi-AP backhaul STA support
+ * fixed build with LibreSSL
+ * number of MKA/MACsec fixes and extensions
+ * extended domain_match and domain_suffix_match to allow list of values
+ * fixed dNSName matching in domain_match and domain_suffix_match when
+ using wolfSSL
+ * started to prefer FT-EAP-SHA384 over WPA-EAP-SUITE-B-192 AKM if both
+ are enabled
+ * extended nl80211 Connect and external authentication to support
+ SAE, FT-SAE, FT-EAP-SHA384
+ * fixed KEK2 derivation for FILS+FT
+ * extended client_cert file to allow loading of a chain of PEM
+ encoded certificates
+ * extended beacon reporting functionality
+ * extended D-Bus interface with number of new properties
+ * fixed a regression in FT-over-DS with mac80211-based drivers
+ * OpenSSL: allow systemwide policies to be overridden
+ * extended driver flags indication for separate 802.1X and PSK
+ 4-way handshake offload capability
+ * added support for random P2P Device/Interface Address use
+ * extended PEAP to derive EMSK to enable use with ERP/FILS
+ * extended WPS to allow SAE configuration to be added automatically
+ for PSK (wps_cred_add_sae=1)
+ * removed support for the old D-Bus interface (CONFIG_CTRL_IFACE_DBUS)
+ * extended domain_match and domain_suffix_match to allow list of values
+ * added a RSN workaround for misbehaving PMF APs that advertise
+ IGTK/BIP KeyID using incorrect byte order
+ * fixed PTK rekeying with FILS and FT
+
+2018-12-02 - v2.7
+ * fixed WPA packet number reuse with replayed messages and key
+ reinstallation
+ [https://w1.fi/security/2017-1/] (CVE-2017-13077, CVE-2017-13078,
+ CVE-2017-13079, CVE-2017-13080, CVE-2017-13081, CVE-2017-13082,
+ CVE-2017-13086, CVE-2017-13087, CVE-2017-13088)
+ * fixed unauthenticated EAPOL-Key decryption in wpa_supplicant
+ [https://w1.fi/security/2018-1/] (CVE-2018-14526)
+ * added support for FILS (IEEE 802.11ai) shared key authentication
+ * added support for OWE (Opportunistic Wireless Encryption, RFC 8110;
+ and transition mode defined by WFA)
+ * added support for DPP (Wi-Fi Device Provisioning Protocol)
+ * added support for RSA 3k key case with Suite B 192-bit level
+ * fixed Suite B PMKSA caching not to update PMKID during each 4-way
+ handshake
+ * fixed EAP-pwd pre-processing with PasswordHashHash
+ * added EAP-pwd client support for salted passwords
+ * fixed a regression in TDLS prohibited bit validation
+ * started to use estimated throughput to avoid undesired signal
+ strength based roaming decision
+ * MACsec/MKA:
+ - new macsec_linux driver interface support for the Linux
+ kernel macsec module
+ - number of fixes and extensions
+ * added support for external persistent storage of PMKSA cache
+ (PMKSA_GET/PMKSA_ADD control interface commands; and
+ MESH_PMKSA_GET/MESH_PMKSA_SET for the mesh case)
+ * fixed mesh channel configuration pri/sec switch case
+ * added support for beacon report
+ * large number of other fixes, cleanup, and extensions
+ * added support for randomizing local address for GAS queries
+ (gas_rand_mac_addr parameter)
+ * fixed EAP-SIM/AKA/AKA' ext auth cases within TLS tunnel
+ * added option for using random WPS UUID (auto_uuid=1)
+ * added SHA256-hash support for OCSP certificate matching
+ * fixed EAP-AKA' to add AT_KDF into Synchronization-Failure
+ * fixed a regression in RSN pre-authentication candidate selection
+ * added option to configure allowed group management cipher suites
+ (group_mgmt network profile parameter)
+ * removed all PeerKey functionality
+ * fixed nl80211 AP and mesh mode configuration regression with
+ Linux 4.15 and newer
+ * added ap_isolate configuration option for AP mode
+ * added support for nl80211 to offload 4-way handshake into the driver
+ * added support for using wolfSSL cryptographic library
+ * SAE
+ - added support for configuring SAE password separately of the
+ WPA2 PSK/passphrase
+ - fixed PTK and EAPOL-Key integrity and key-wrap algorithm selection
+ for SAE;
+ note: this is not backwards compatible, i.e., both the AP and
+ station side implementations will need to be update at the same
+ time to maintain interoperability
+ - added support for Password Identifier
+ - fixed FT-SAE PMKID matching
+ * Hotspot 2.0
+ - added support for fetching of Operator Icon Metadata ANQP-element
+ - added support for Roaming Consortium Selection element
+ - added support for Terms and Conditions
+ - added support for OSEN connection in a shared RSN BSS
+ - added support for fetching Venue URL information
+ * added support for using OpenSSL 1.1.1
+ * FT
+ - disabled PMKSA caching with FT since it is not fully functional
+ - added support for SHA384 based AKM
+ - added support for BIP ciphers BIP-CMAC-256, BIP-GMAC-128,
+ BIP-GMAC-256 in addition to previously supported BIP-CMAC-128
+ - fixed additional IE inclusion in Reassociation Request frame when
+ using FT protocol
+
+2016-10-02 - v2.6
+ * fixed WNM Sleep Mode processing when PMF is not enabled
+ [http://w1.fi/security/2015-6/] (CVE-2015-5310)
+ * fixed EAP-pwd last fragment validation
+ [http://w1.fi/security/2015-7/] (CVE-2015-5315)
+ * fixed EAP-pwd unexpected Confirm message processing
+ [http://w1.fi/security/2015-8/] (CVE-2015-5316)
+ * fixed WPS configuration update vulnerability with malformed passphrase
+ [http://w1.fi/security/2016-1/] (CVE-2016-4476)
+ * fixed configuration update vulnerability with malformed parameters set
+ over the local control interface
+ [http://w1.fi/security/2016-1/] (CVE-2016-4477)
+ * fixed TK configuration to the driver in EAPOL-Key 3/4 retry case
+ * extended channel switch support for P2P GO
+ * started to throttle control interface event message bursts to avoid
+ issues with monitor sockets running out of buffer space
+ * mesh mode fixes/improvements
+ - generate proper AID for peer
+ - enable WMM by default
+ - add VHT support
+ - fix PMKID derivation
+ - improve robustness on various exchanges
+ - fix peer link counting in reconnect case
+ - improve mesh joining behavior
+ - allow DTIM period to be configured
+ - allow HT to be disabled (disable_ht=1)
+ - add MESH_PEER_ADD and MESH_PEER_REMOVE commands
+ - add support for PMKSA caching
+ - add minimal support for SAE group negotiation
+ - allow pairwise/group cipher to be configured in the network profile
+ - use ieee80211w profile parameter to enable/disable PMF and derive
+ a separate TX IGTK if PMF is enabled instead of using MGTK
+ incorrectly
+ - fix AEK and MTK derivation
+ - remove GTKdata and IGTKdata from Mesh Peering Confirm/Close
+ - note: these changes are not fully backwards compatible for secure
+ (RSN) mesh network
+ * fixed PMKID derivation with SAE
+ * added support for requesting and fetching arbitrary ANQP-elements
+ without internal support in wpa_supplicant for the specific element
+ (anqp[265]=<hexdump> in "BSS <BSSID>" command output)
+ * P2P
+ - filter control characters in group client device names to be
+ consistent with other P2P peer cases
+ - support VHT 80+80 MHz and 160 MHz
+ - indicate group completion in P2P Client role after data association
+ instead of already after the WPS provisioning step
+ - improve group-join operation to use SSID, if known, to filter BSS
+ entries
+ - added optional ssid=<hexdump> argument to P2P_CONNECT for join case
+ - added P2P_GROUP_MEMBER command to fetch client interface address
+ * P2PS
+ - fix follow-on PD Response behavior
+ - fix PD Response generation for unknown peer
+ - fix persistent group reporting
+ - add channel policy to PD Request
+ - add group SSID to the P2PS-PROV-DONE event
+ - allow "P2P_CONNECT <addr> p2ps" to be used without specifying the
+ default PIN
+ * BoringSSL
+ - support for OCSP stapling
+ - support building of h20-osu-client
+ * D-Bus
+ - add ExpectDisconnect()
+ - add global config parameters as properties
+ - add SaveConfig()
+ - add VendorElemAdd(), VendorElemGet(), VendorElemRem()
+ * fixed Suite B 192-bit AKM to use proper PMK length
+ (note: this makes old releases incompatible with the fixed behavior)
+ * improved PMF behavior for cases where the AP and STA has different
+ configuration by not trying to connect in some corner cases where the
+ connection cannot succeed
+ * added option to reopen debug log (e.g., to rotate the file) upon
+ receipt of SIGHUP signal
+ * EAP-pwd: added support for Brainpool Elliptic Curves
+ (with OpenSSL 1.0.2 and newer)
+ * fixed EAPOL reauthentication after FT protocol run
+ * fixed FTIE generation for 4-way handshake after FT protocol run
+ * extended INTERFACE_ADD command to allow certain type (sta/ap)
+ interface to be created
+ * fixed and improved various FST operations
+ * added 80+80 MHz and 160 MHz VHT support for IBSS/mesh
+ * fixed SIGNAL_POLL in IBSS and mesh cases
+ * added an option to abort an ongoing scan (used to speed up connection
+ and can also be done with the new ABORT_SCAN command)
+ * TLS client
+ - do not verify CA certificates when ca_cert is not specified
+ - support validating server certificate hash
+ - support SHA384 and SHA512 hashes
+ - add signature_algorithms extension into ClientHello
+ - support TLS v1.2 signature algorithm with SHA384 and SHA512
+ - support server certificate probing
+ - allow specific TLS versions to be disabled with phase2 parameter
+ - support extKeyUsage
+ - support PKCS #5 v2.0 PBES2
+ - support PKCS #5 with PKCS #12 style key decryption
+ - minimal support for PKCS #12
+ - support OCSP stapling (including ocsp_multi)
+ * OpenSSL
+ - support OpenSSL 1.1 API changes
+ - drop support for OpenSSL 0.9.8
+ - drop support for OpenSSL 1.0.0
+ * added support for multiple schedule scan plans (sched_scan_plans)
+ * added support for external server certificate chain validation
+ (tls_ext_cert_check=1 in the network profile phase1 parameter)
+ * made phase2 parser more strict about correct use of auth=<val> and
+ autheap=<val> values
+ * improved GAS offchannel operations with comeback request
+ * added SIGNAL_MONITOR command to request signal strength monitoring
+ events
+ * added command for retrieving HS 2.0 icons with in-memory storage
+ (REQ_HS20_ICON, GET_HS20_ICON, DEL_HS20_ICON commands and
+ RX-HS20-ICON event)
+ * enabled ACS support for AP mode operations with wpa_supplicant
+ * EAP-PEAP: fixed interoperability issue with Windows 2012r2 server
+ ("Invalid Compound_MAC in cryptobinding TLV")
+ * EAP-TTLS: fixed success after fragmented final Phase 2 message
+ * VHT: added interoperability workaround for 80+80 and 160 MHz channels
+ * WNM: workaround for broken AP operating class behavior
+ * added kqueue(2) support for eloop (CONFIG_ELOOP_KQUEUE)
+ * nl80211:
+ - add support for full station state operations
+ - do not add NL80211_ATTR_SMPS_MODE attribute if HT is disabled
+ - add NL80211_ATTR_PREV_BSSID with Connect command
+ - fix IEEE 802.1X/WEP EAP reauthentication and rekeying to use
+ unencrypted EAPOL frames
+ * added initial MBO support; number of extensions to WNM BSS Transition
+ Management
+ * added support for PBSS/PCP and P2P on 60 GHz
+ * Interworking: add credential realm to EAP-TLS identity
+ * fixed EAPOL-Key Request Secure bit to be 1 if PTK is set
+ * HS 2.0: add support for configuring frame filters
+ * added POLL_STA command to check connectivity in AP mode
+ * added initial functionality for location related operations
+ * started to ignore pmf=1/2 parameter for non-RSN networks
+ * added wps_disabled=1 network profile parameter to allow AP mode to
+ be started without enabling WPS
+ * wpa_cli: added action script support for AP-ENABLED and AP-DISABLED
+ events
+ * improved Public Action frame addressing
+ - add gas_address3 configuration parameter to control Address 3
+ behavior
+ * number of small fixes
+
+2015-09-27 - v2.5
+ * fixed P2P validation of SSID element length before copying it
+ [http://w1.fi/security/2015-1/] (CVE-2015-1863)
+ * fixed WPS UPnP vulnerability with HTTP chunked transfer encoding
+ [http://w1.fi/security/2015-2/] (CVE-2015-4141)
+ * fixed WMM Action frame parser (AP mode)
+ [http://w1.fi/security/2015-3/] (CVE-2015-4142)
+ * fixed EAP-pwd peer missing payload length validation
+ [http://w1.fi/security/2015-4/]
+ (CVE-2015-4143, CVE-2015-4144, CVE-2015-4145, CVE-2015-4146)
+ * fixed validation of WPS and P2P NFC NDEF record payload length
+ [http://w1.fi/security/2015-5/]
+ * nl80211:
+ - added VHT configuration for IBSS
+ - fixed vendor command handling to check OUI properly
+ - allow driver-based roaming to change ESS
+ * added AVG_BEACON_RSSI to SIGNAL_POLL output
+ * wpa_cli: added tab completion for number of commands
+ * removed unmaintained and not yet completed SChannel/CryptoAPI support
+ * modified Extended Capabilities element use in Probe Request frames to
+ include all cases if any of the values are non-zero
+ * added support for dynamically creating/removing a virtual interface
+ with interface_add/interface_remove
+ * added support for hashed password (NtHash) in EAP-pwd peer
+ * added support for memory-only PSK/passphrase (mem_only_psk=1 and
+ CTRL-REQ/RSP-PSK_PASSPHRASE)
+ * P2P
+ - optimize scan frequencies list when re-joining a persistent group
+ - fixed number of sequences with nl80211 P2P Device interface
+ - added operating class 125 for P2P use cases (this allows 5 GHz
+ channels 161 and 169 to be used if they are enabled in the current
+ regulatory domain)
+ - number of fixes to P2PS functionality
+ - do not allow 40 MHz co-ex PRI/SEC switch to force MCC
+ - extended support for preferred channel listing
+ * D-Bus:
+ - fixed WPS property of fi.w1.wpa_supplicant1.BSS interface
+ - fixed PresenceRequest to use group interface
+ - added new signals: FindStopped, WPS pbc-overlap,
+ GroupFormationFailure, WPS timeout, InvitationReceived
+ - added new methods: WPS Cancel, P2P Cancel, Reconnect, RemoveClient
+ - added manufacturer info
+ * added EAP-EKE peer support for deriving Session-Id
+ * added wps_priority configuration parameter to set the default priority
+ for all network profiles added by WPS
+ * added support to request a scan with specific SSIDs with the SCAN
+ command (optional "ssid <hexdump>" arguments)
+ * removed support for WEP40/WEP104 as a group cipher with WPA/WPA2
+ * fixed SAE group selection in an error case
+ * modified SAE routines to be more robust and PWE generation to be
+ stronger against timing attacks
+ * added support for Brainpool Elliptic Curves with SAE
+ * added support for CCMP-256 and GCMP-256 as group ciphers with FT
+ * fixed BSS selection based on estimated throughput
+ * added option to disable TLSv1.0 with OpenSSL
+ (phase1="tls_disable_tlsv1_0=1")
+ * added Fast Session Transfer (FST) module
+ * fixed OpenSSL PKCS#12 extra certificate handling
+ * fixed key derivation for Suite B 192-bit AKM (this breaks
+ compatibility with the earlier version)
+ * added RSN IE to Mesh Peering Open/Confirm frames
+ * number of small fixes
+
+2015-03-15 - v2.4
+ * allow OpenSSL cipher configuration to be set for internal EAP server
+ (openssl_ciphers parameter)
+ * fixed number of small issues based on hwsim test case failures and
+ static analyzer reports
+ * P2P:
+ - add new=<0/1> flag to P2P-DEVICE-FOUND events
+ - add passive channels in invitation response from P2P Client
+ - enable nl80211 P2P_DEVICE support by default
+ - fix regresssion in disallow_freq preventing search on social
+ channels
+ - fix regressions in P2P SD query processing
+ - try to re-invite with social operating channel if no common channels
+ in invitation
+ - allow cross connection on parent interface (this fixes number of
+ use cases with nl80211)
+ - add support for P2P services (P2PS)
+ - add p2p_go_ctwindow configuration parameter to allow GO CTWindow to
+ be configured
+ * increase postponing of EAPOL-Start by one second with AP/GO that
+ supports WPS 2.0 (this makes it less likely to trigger extra roundtrip
+ of identity frames)
+ * add support for PMKSA caching with SAE
+ * add support for control mesh BSS (IEEE 802.11s) operations
+ * fixed number of issues with D-Bus P2P commands
+ * fixed regression in ap_scan=2 special case for WPS
+ * fixed macsec_validate configuration
+ * add a workaround for incorrectly behaving APs that try to use
+ EAPOL-Key descriptor version 3 when the station supports PMF even if
+ PMF is not enabled on the AP
+ * allow TLS v1.1 and v1.2 to be negotiated by default; previous behavior
+ of disabling these can be configured to work around issues with broken
+ servers with phase1="tls_disable_tlsv1_1=1 tls_disable_tlsv1_2=1"
+ * add support for Suite B (128-bit and 192-bit level) key management and
+ cipher suites
+ * add WMM-AC support (WMM_AC_ADDTS/WMM_AC_DELTS)
+ * improved BSS Transition Management processing
+ * add support for neighbor report
+ * add support for link measurement
+ * fixed expiration of BSS entry with all-zeros BSSID
+ * add optional LAST_ID=x argument to LIST_NETWORK to allow all
+ configured networks to be listed even with huge number of network
+ profiles
+ * add support for EAP Re-Authentication Protocol (ERP)
+ * fixed EAP-IKEv2 fragmentation reassembly
+ * improved PKCS#11 configuration for OpenSSL
+ * set stdout to be line-buffered
+ * add TDLS channel switch configuration
+ * add support for MAC address randomization in scans with nl80211
+ * enable HT for IBSS if supported by the driver
+ * add BSSID black and white lists (bssid_blacklist, bssid_whitelist)
+ * add support for domain_suffix_match with GnuTLS
+ * add OCSP stapling client support with GnuTLS
+ * include peer certificate in EAP events even without a separate probe
+ operation; old behavior can be restored with cert_in_cb=0
+ * add peer ceritficate alt subject name to EAP events
+ (CTRL-EVENT-EAP-PEER-ALT)
+ * add domain_match network profile parameter (similar to
+ domain_suffix_match, but full match is required)
+ * enable AP/GO mode HT Tx STBC automatically based on driver support
+ * add ANQP-QUERY-DONE event to provide information on ANQP parsing
+ status
+ * allow passive scanning to be forced with passive_scan=1
+ * add a workaround for Linux packet socket behavior when interface is in
+ bridge
+ * increase 5 GHz band preference in BSS selection (estimate SNR, if info
+ not available from driver; estimate maximum throughput based on common
+ HT/VHT/specific TX rate support)
+ * add INTERWORKING_ADD_NETWORK ctrl_iface command; this can be used to
+ implement Interworking network selection behavior in upper layers
+ software components
+ * add optional reassoc_same_bss_optim=1 (disabled by default)
+ optimization to avoid unnecessary Authentication frame exchange
+ * extend TDLS frame padding workaround to cover all packets
+ * allow wpa_supplicant to recover nl80211 functionality if the cfg80211
+ module gets removed and reloaded without restarting wpa_supplicant
+ * allow hostapd DFS implementation to be used in wpa_supplicant AP mode
+
+2014-10-09 - v2.3
+ * fixed number of minor issues identified in static analyzer warnings
+ * fixed wfd_dev_info to be more careful and not read beyond the buffer
+ when parsing invalid information for P2P-DEVICE-FOUND
+ * extended P2P and GAS query operations to support drivers that have
+ maximum remain-on-channel time below 1000 ms (500 ms is the current
+ minimum supported value)
+ * added p2p_search_delay parameter to make the default p2p_find delay
+ configurable
+ * improved P2P operating channel selection for various multi-channel
+ concurrency cases
+ * fixed some TDLS failure cases to clean up driver state
+ * fixed dynamic interface addition cases with nl80211 to avoid adding
+ ifindex values to incorrect interface to skip foreign interface events
+ properly
+ * added TDLS workaround for some APs that may add extra data to the
+ end of a short frame
+ * fixed EAP-AKA' message parser with multiple AT_KDF attributes
+ * added configuration option (p2p_passphrase_len) to allow longer
+ passphrases to be generated for P2P groups
+ * fixed IBSS channel configuration in some corner cases
+ * improved HT/VHT/QoS parameter setup for TDLS
+ * modified D-Bus interface for P2P peers/groups
+ * started to use constant time comparison for various password and hash
+ values to reduce possibility of any externally measurable timing
+ differences
+ * extended explicit clearing of freed memory and expired keys to avoid
+ keeping private data in memory longer than necessary
+ * added optional scan_id parameter to the SCAN command to allow manual
+ scan requests for active scans for specific configured SSIDs
+ * fixed CTRL-EVENT-REGDOM-CHANGE event init parameter value
+ * added option to set Hotspot 2.0 Rel 2 update_identifier in network
+ configuration to support external configuration
+ * modified Android PNO functionality to send Probe Request frames only
+ for hidden SSIDs (based on scan_ssid=1)
+ * added generic mechanism for adding vendor elements into frames at
+ runtime (VENDOR_ELEM_ADD, VENDOR_ELEM_GET, VENDOR_ELEM_REMOVE)
+ * added fields to show unrecognized vendor elements in P2P_PEER
+ * removed EAP-TTLS/MSCHAPv2 interoperability workaround so that
+ MS-CHAP2-Success is required to be present regardless of
+ eap_workaround configuration
+ * modified EAP fast session resumption to allow results to be used only
+ with the same network block that generated them
+ * extended freq_list configuration to apply for sched_scan as well as
+ normal scan
+ * modified WPS to merge mixed-WPA/WPA2 credentials from a single session
+ * fixed nl80211/RTM_DELLINK processing when a P2P GO interface is
+ removed from a bridge
+ * fixed number of small P2P issues to make negotiations more robust in
+ corner cases
+ * added experimental support for using temporary, random local MAC
+ address (mac_addr and preassoc_mac_addr parameters); this is disabled
+ by default (i.e., previous behavior of using permanent address is
+ maintained if configuration is not changed)
+ * added D-Bus interface for setting/clearing WFD IEs
+ * fixed TDLS AID configuration for VHT
+ * modified -m<conf> configuration file to be used only for the P2P
+ non-netdev management device and do not load this for the default
+ station interface or load the station interface configuration for
+ the P2P management interface
+ * fixed external MAC address changes while wpa_supplicant is running
+ * started to enable HT (if supported by the driver) for IBSS
+ * fixed wpa_cli action script execution to use more robust mechanism
+ (CVE-2014-3686)
+
+2014-06-04 - v2.2
+ * added DFS indicator to get_capability freq
+ * added/fixed nl80211 functionality
+ - BSSID/frequency hint for driver-based BSS selection
+ - fix tearing down WDS STA interfaces
+ - support vendor specific driver command
+ (VENDOR <vendor id> <sub command id> [<hex formatted data>])
+ - GO interface teardown optimization
+ - allow beacon interval to be configured for IBSS
+ - add SHA256-based AKM suites to CONNECT/ASSOCIATE commands
+ * removed unused NFC_RX_HANDOVER_REQ and NFC_RX_HANDOVER_SEL control
+ interface commands (the more generic NFC_REPORT_HANDOVER is now used)
+ * fixed MSCHAP UTF-8 to UCS-2 conversion for three-byte encoding;
+ this fixes password with include UTF-8 characters that use
+ three-byte encoding EAP methods that use NtPasswordHash
+ * fixed couple of sequences where radio work items could get stuck,
+ e.g., when rfkill blocking happens during scanning or when
+ scan-for-auth workaround is used
+ * P2P enhancements/fixes
+ - enable enable U-APSD on GO automatically if the driver indicates
+ support for this
+ - fixed some service discovery cases with broadcast queries not being
+ sent to all stations
+ - fixed Probe Request frame triggering invitation to trigger only a
+ single invitation instance even if multiple Probe Request frames are
+ received
+ - fixed a potential NULL pointer dereference crash when processing an
+ invalid Invitation Request frame
+ - add optional configuration file for the P2P_DEVICE parameters
+ - optimize scan for GO during persistent group invocation
+ - fix possible segmentation fault when PBC overlap is detected while
+ using a separate P2P group interface
+ - improve GO Negotiation robustness by allowing GO Negotiation
+ Confirmation to be retransmitted
+ - do use freed memory on device found event when P2P NFC
+ * added phase1 network parameter options for disabling TLS v1.1 and v1.2
+ to allow workarounds with misbehaving AAA servers
+ (tls_disable_tlsv1_1=1 and tls_disable_tlsv1_2=1)
+ * added support for OCSP stapling to validate AAA server certificate
+ during TLS exchange
+ * Interworking/Hotspot 2.0 enhancements
+ - prefer the last added network in Interworking connection to make the
+ behavior more consistent with likely user expectation
+ - roaming partner configuration (roaming_partner within a cred block)
+ - support Hotspot 2.0 Release 2
+ * "hs20_anqp_get <BSSID> 8" to request OSU Providers list
+ * "hs20_icon_request <BSSID> <icon filename>" to request icon files
+ * "fetch_osu" and "cancel_osu_fetch" to start/stop full OSU provider
+ search (all suitable APs in scan results)
+ * OSEN network for online signup connection
+ * min_{dl,ul}_bandwidth_{home,roaming} cred parameters
+ * max_bss_load cred parameter
+ * req_conn_capab cred parameter
+ * sp_priority cred parameter
+ * ocsp cred parameter
+ * slow down automatic connection attempts on EAP failure to meet
+ required behavior (no more than 10 retries within a 10-minute
+ interval)
+ * sample implementation of online signup client (both SPP and
+ OMA-DM protocols) (hs20/client/*)
+ - fixed GAS indication for additional comeback delay with status
+ code 95
+ - extend ANQP_GET to accept Hotspot 2.0 subtypes
+ ANQP_GET <addr> <info id>[,<info id>]...
+ [,hs20:<subtype>][...,hs20:<subtype>]
+ - add control interface events CRED-ADDED <id>,
+ CRED-MODIFIED <id> <field>, CRED-REMOVED <id>
+ - add "GET_CRED <id> <field>" command
+ - enable FT for the connection automatically if the AP advertises
+ support for this
+ - fix a case where auto_interworking=1 could end up stopping scanning
+ * fixed TDLS interoperability issues with supported operating class in
+ some deployed stations
+ * internal TLS implementation enhancements/fixes
+ - add SHA256-based cipher suites
+ - add DHE-RSA cipher suites
+ - fix X.509 validation of PKCS#1 signature to check for extra data
+ * fixed PTK derivation for CCMP-256 and GCMP-256
+ * added "reattach" command for fast reassociate-back-to-same-BSS
+ * allow PMF to be enabled for AP mode operation with the ieee80211w
+ parameter
+ * added "get_capability tdls" command
+ * added option to set config blobs through control interface with
+ "SET blob <name> <hexdump>"
+ * D-Bus interface extensions/fixes
+ - make p2p_no_group_iface configurable
+ - declare ServiceDiscoveryRequest method properly
+ - export peer's device address as a property
+ - make reassociate command behave like the control interface one,
+ i.e., to allow connection from disconnected state
+ * added optional "freq=<channel ranges>" parameter to SET pno
+ * added optional "freq=<channel ranges>" parameter to SELECT_NETWORK
+ * fixed OBSS scan result processing for 20/40 MHz co-ex report
+ * remove WPS 1.0 only support, i.e., WSC 2.0 support is now enabled
+ whenever CONFIG_WPS=y is set
+ * fixed regression in parsing of WNM Sleep Mode exit key data
+ * fixed potential segmentation fault and memory leaks in WNM neighbor
+ report processing
+ * EAP-pwd fixes
+ - fragmentation of PWD-Confirm-Resp
+ - fix memory leak when fragmentation is used
+ - fix possible segmentation fault on EAP method deinit if an invalid
+ group is negotiated
+ * added MACsec/IEEE Std 802.1X-2010 PAE implementation (currently
+ available only with the macsec_qca driver wrapper)
+ * fixed EAP-SIM counter-too-small message
+ * added 'dup_network <id_s> <id_d> <name>' command; this can be used to
+ clone the psk field without having toextract it from wpa_supplicant
+ * fixed GSM authentication on USIM
+ * added support for using epoll in eloop (CONFIG_ELOOP_EPOLL=y)
+ * fixed some concurrent virtual interface cases with dedicated P2P
+ management interface to not catch events from removed interface (this
+ could result in the management interface getting disabled)
+ * fixed a memory leak in SAE random number generation
+ * fixed off-by-one bounds checking in printf_encode()
+ - this could result in some control interface ATTACH command cases
+ terminating wpa_supplicant
+ * fixed EAPOL-Key exchange when GCMP is used with SHA256-based AKM
+ * various bug fixes
+
+2014-02-04 - v2.1
+ * added support for simultaneous authentication of equals (SAE) for
+ stronger password-based authentication with WPA2-Personal
+ * improved P2P negotiation and group formation robustness
+ - avoid unnecessary Dialog Token value changes during retries
+ - avoid more concurrent scanning cases during full group formation
+ sequence
+ - do not use potentially obsolete scan result data from driver
+ cache for peer discovery/updates
+ - avoid undesired re-starting of GO negotiation based on Probe
+ Request frames
+ - increase GO Negotiation and Invitation timeouts to address busy
+ environments and peers that take long time to react to messages,
+ e.g., due to power saving
+ - P2P Device interface type
+ * improved P2P channel selection (use more peer information and allow
+ more local options)
+ * added support for optional per-device PSK assignment by P2P GO
+ (wpa_cli p2p_set per_sta_psk <0/1>)
+ * added P2P_REMOVE_CLIENT for removing a client from P2P groups
+ (including persistent groups); this can be used to securely remove
+ a client from a group if per-device PSKs are used
+ * added more configuration flexibility for allowed P2P GO/client
+ channels (p2p_no_go_freq list and p2p_add_cli_chan=0/1)
+ * added nl80211 functionality
+ - VHT configuration for nl80211
+ - MFP (IEEE 802.11w) information for nl80211 command API
+ - support split wiphy dump
+ - FT (IEEE 802.11r) with driver-based SME
+ - use advertised number of supported concurrent channels
+ - QoS Mapping configuration
+ * improved TDLS negotiation robustness
+ * added more TDLS peer parameters to be configured to the driver
+ * optimized connection time by allowing recently received scan results
+ to be used instead of having to run through a new scan
+ * fixed ctrl_iface BSS command iteration with RANGE argument and no
+ exact matches; also fixed argument parsing for some cases with
+ multiple arguments
+ * added 'SCAN TYPE=ONLY' ctrl_iface command to request manual scan
+ without executing roaming/network re-selection on scan results
+ * added Session-Id derivation for EAP peer methods
+ * added fully automated regression testing with mac80211_hwsim
+ * changed configuration parser to reject invalid integer values
+ * allow AP/Enrollee to be specified with BSSID instead of UUID for
+ WPS ER operations
+ * disable network block temporarily on repeated connection failures
+ * changed the default driver interface from wext to nl80211 if both are
+ included in the build
+ * remove duplicate networks if WPS provisioning is run multiple times
+ * remove duplicate networks when Interworking network selection uses the
+ same network
+ * added global freq_list configuration to allow scan frequencies to be
+ limited for all cases instead of just for a specific network block
+ * added support for BSS Transition Management
+ * added option to use "IFNAME=<ifname> " prefix to use the global
+ control interface connection to perform per-interface commands;
+ similarly, allow global control interface to be used as a monitor
+ interface to receive events from all interfaces
+ * fixed OKC-based PMKSA cache entry clearing
+ * fixed TKIP group key configuration with FT
+ * added support for using OCSP stapling to validate server certificate
+ (ocsp=1 as optional and ocsp=2 as mandatory)
+ * added EAP-EKE peer
+ * added peer restart detection for IBSS RSN
+ * added domain_suffix_match (and domain_suffix_match2 for Phase 2
+ EAP-TLS) to specify additional constraint for the server certificate
+ domain name
+ * added support for external SIM/USIM processing in EAP-SIM, EAP-AKA,
+ and EAP-AKA' (CTRL-REQ-SIM and CTRL-RSP-SIM commands over control
+ interface)
+ * added global bgscan configuration option as a default for all network
+ blocks that do not specify their own bgscan parameters
+ * added D-Bus methods for TDLS
+ * added more control to scan requests
+ - "SCAN freq=<freq list>" can be used to specify which channels are
+ scanned (comma-separated frequency ranges in MHz)
+ - "SCAN passive=1" can be used to request a passive scan (no Probe
+ Request frames are sent)
+ - "SCAN use_id" can be used to request a scan id to be returned and
+ included in event messages related to this specific scan operation
+ - "SCAN only_new=1" can be used to request the driver/cfg80211 to
+ report only BSS entries that have been updated during this scan
+ round
+ - these optional arguments to the SCAN command can be combined with
+ each other
+ * modified behavior on externally triggered scans
+ - avoid concurrent operations requiring full control of the radio when
+ an externally triggered scan is detected
+ - do not use results for internal roaming decision
+ * added a new cred block parameter 'temporary' to allow credential
+ blocks to be stored separately even if wpa_supplicant configuration
+ file is used to maintain other network information
+ * added "radio work" framework to schedule exclusive radio operations
+ for off-channel functionality
+ - reduce issues with concurrent operations that try to control which
+ channel is used
+ - allow external programs to request exclusive radio control in a way
+ that avoids conflicts with wpa_supplicant
+ * added support for using Protected Dual of Public Action frames for
+ GAS/ANQP exchanges when associated with PMF
+ * added support for WPS+NFC updates and P2P+NFC
+ - improved protocol for WPS
+ - P2P group formation/join based on NFC connection handover
+ - new IPv4 address assignment for P2P groups (ip_addr_* configuration
+ parameters on the GO) to replace DHCP
+ - option to fetch and report alternative carrier records for external
+ NFC operations
+ * various bug fixes
+
+2013-01-12 - v2.0
+ * removed Qt3-based wpa_gui (obsoleted by wpa_qui-qt4)
+ * removed unmaintained driver wrappers broadcom, iphone, osx, ralink,
+ hostap, madwifi (hostap and madwifi remain available for hostapd;
+ their wpa_supplicant functionality is obsoleted by wext)
+ * improved debug logging (human readable event names, interface name
+ included in more entries)
+ * changed AP mode behavior to enable WPS only for open and
+ WPA/WPA2-Personal configuration
+ * improved P2P concurrency operations
+ - better coordination of concurrent scan and P2P search operations
+ - avoid concurrent remain-on-channel operation requests by canceling
+ previous operations prior to starting a new one
+ - reject operations that would require multi-channel concurrency if
+ the driver does not support it
+ - add parameter to select whether STA or P2P connection is preferred
+ if the driver cannot support both at the same time
+ - allow driver to indicate channel changes
+ - added optional delay=<search delay in milliseconds> parameter for
+ p2p_find to avoid taking all radio resources
+ - use 500 ms p2p_find search delay by default during concurrent
+ operations
+ - allow all channels in GO Negotiation if the driver supports
+ multi-channel concurrency
+ * added number of small changes to make it easier for static analyzers
+ to understand the implementation
+ * fixed number of small bugs (see git logs for more details)
+ * nl80211: number of updates to use new cfg80211/nl80211 functionality
+ - replace monitor interface with nl80211 commands for AP mode
+ - additional information for driver-based AP SME
+ - STA entry authorization in RSN IBSS
+ * EAP-pwd:
+ - fixed KDF for group 21 and zero-padding
+ - added support for fragmentation
+ - increased maximum number of hunting-and-pecking iterations
+ * avoid excessive Probe Response retries for broadcast Probe Request
+ frames (only with drivers using wpa_supplicant AP mode SME/MLME)
+ * added "GET country" ctrl_iface command
+ * do not save an invalid network block in wpa_supplicant.conf to avoid
+ problems reading the file on next start
+ * send STA connected/disconnected ctrl_iface events to both the P2P
+ group and parent interfaces
+ * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
+ * added "SET pno <1/0>" ctrl_iface command to start/stop preferred
+ network offload with sched_scan driver command
+ * merged in number of changes from Android repository for P2P, nl80211,
+ and build parameters
+ * changed P2P GO mode configuration to use driver capabilities to
+ automatically enable HT operations when supported
+ * added "wpa_cli status wps" command to fetch WPA2-Personal passhrase
+ for WPS use cases in AP mode
+ * EAP-AKA: keep pseudonym identity across EAP exchanges to match EAP-SIM
+ behavior
+ * improved reassociation behavior in cases where association is rejected
+ or when an AP disconnects us to handle common load balancing
+ mechanisms
+ - try to avoid extra scans when the needed information is available
+ * added optional "join" argument for p2p_prov_disc ctrl_iface command
+ * added group ifname to P2P-PROV-DISC-* events
+ * added P2P Device Address to AP-STA-DISCONNECTED event and use
+ p2p_dev_addr parameter name with AP-STA-CONNECTED
+ * added workarounds for WPS PBC overlap detection for some P2P use cases
+ where deployed stations work incorrectly
+ * optimize WPS connection speed by disconnecting prior to WPS scan and
+ by using single channel scans when AP channel is known
+ * PCSC and SIM/USIM improvements:
+ - accept 0x67 (Wrong length) as a response to READ RECORD to fix
+ issues with some USIM cards
+ - try to read MNC length from SIM/USIM
+ - build realm according to 3GPP TS 23.003 with identity from the SIM
+ - allow T1 protocol to be enabled
+ * added more WPS and P2P information available through D-Bus
+ * improve P2P negotiation robustness
+ - extra waits to get ACK frames through
+ - longer timeouts for cases where deployed devices have been
+ identified have issues meeting the specification requirements
+ - more retries for some P2P frames
+ - handle race conditions in GO Negotiation start by both devices
+ - ignore unexpected GO Negotiation Response frame
+ * added support for libnl 3.2 and newer
+ * added P2P persistent group info to P2P_PEER data
+ * maintain a list of P2P Clients for persistent group on GO
+ * AP: increased initial group key handshake retransmit timeout to 500 ms
+ * added optional dev_id parameter for p2p_find
+ * added P2P-FIND-STOPPED ctrl_iface event
+ * fixed issues in WPA/RSN element validation when roaming with ap_scan=1
+ and driver-based BSS selection
+ * do not expire P2P peer entries while connected with the peer in a
+ group
+ * fixed WSC element inclusion in cases where P2P is disabled
+ * AP: added a WPS workaround for mixed mode AP Settings with Windows 7
+ * EAP-SIM: fixed AT_COUNTER_TOO_SMALL use
+ * EAP-SIM/AKA: append realm to pseudonym identity
+ * EAP-SIM/AKA: store pseudonym identity in network configuration to
+ allow it to persist over multiple EAP sessions and wpa_supplicant
+ restarts
+ * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
+ breaks interoperability with older versions
+ * added support for WFA Hotspot 2.0
+ - GAS/ANQP to fetch network information
+ - credential configuration and automatic network selections based on
+ credential match with ANQP information
+ * limited PMKSA cache entries to be used only with the network context
+ that was used to create them
+ * improved PMKSA cache expiration to avoid unnecessary disconnections
+ * adjusted bgscan_simple fast-scan backoff to avoid too frequent
+ background scans
+ * removed ctrl_iface event on P2P PD Response in join-group case
+ * added option to fetch BSS table entry based on P2P Device Address
+ ("BSS p2p_dev_addr=<P2P Device Address>")
+ * added BSS entry age to ctrl_iface BSS command output
+ * added optional MASK=0xH option for ctrl_iface BSS command to select
+ which fields are included in the response
+ * added optional RANGE=ALL|N1-N2 option for ctrl_iface BSS command to
+ fetch information about several BSSes in one call
+ * simplified licensing terms by selecting the BSD license as the only
+ alternative
+ * added "P2P_SET disallow_freq <freq list>" ctrl_iface command to
+ disable channels from P2P use
+ * added p2p_pref_chan configuration parameter to allow preferred P2P
+ channels to be specified
+ * added support for advertising immediate availability of a WPS
+ credential for P2P use cases
+ * optimized scan operations for P2P use cases (use single channel scan
+ for a specific SSID when possible)
+ * EAP-TTLS: fixed peer challenge generation for MSCHAPv2
+ * SME: do not use reassociation after explicit disconnection request
+ (local or a notification from an AP)
+ * added support for sending debug info to Linux tracing (-T on command
+ line)
+ * added support for using Deauthentication reason code 3 as an
+ indication of P2P group termination
+ * added wps_vendor_ext_m1 configuration parameter to allow vendor
+ specific attributes to be added to WPS M1
+ * started using separate TLS library context for tunneled TLS
+ (EAP-PEAP/TLS, EAP-TTLS/TLS, EAP-FAST/TLS) to support different CA
+ certificate configuration between Phase 1 and Phase 2
+ * added optional "auto" parameter for p2p_connect to request automatic
+ GO Negotiation vs. join-a-group selection
+ * added disabled_scan_offload parameter to disable automatic scan
+ offloading (sched_scan)
+ * added optional persistent=<network id> parameter for p2p_connect to
+ allow forcing of a specific SSID/passphrase for GO Negotiation
+ * added support for OBSS scan requests and 20/40 BSS coexistence reports
+ * reject PD Request for unknown group
+ * removed scripts and notes related to Windows binary releases (which
+ have not been used starting from 1.x)
+ * added initial support for WNM operations
+ - Keep-alive based on BSS max idle period
+ - WNM-Sleep Mode
+ - minimal BSS Transition Management processing
+ * added autoscan module to control scanning behavior while not connected
+ - autoscan_periodic and autoscan_exponential modules
+ * added new WPS NFC ctrl_iface mechanism
+ - added initial support NFC connection handover
+ - removed obsoleted WPS_OOB command (including support for deprecated
+ UFD config_method)
+ * added optional framework for external password storage ("ext:<name>")
+ * wpa_cli: added optional support for controlling wpa_supplicant
+ remotely over UDP (CONFIG_CTRL_IFACE=udp-remote) for testing purposes
+ * wpa_cli: extended tab completion to more commands
+ * changed SSID output to use printf-escaped strings instead of masking
+ of non-ASCII characters
+ - SSID can now be configured in the same format: ssid=P"abc\x00test"
+ * removed default ACM=1 from AC_VO and AC_VI
+ * added optional "ht40" argument for P2P ctrl_iface commands to allow
+ 40 MHz channels to be requested on the 5 GHz band
+ * added optional parameters for p2p_invite command to specify channel
+ when reinvoking a persistent group as the GO
+ * improved FIPS mode builds with OpenSSL
+ - "make fips" with CONFIG_FIPS=y to build wpa_supplicant with the
+ OpenSSL FIPS object module
+ - replace low level OpenSSL AES API calls to use EVP
+ - use OpenSSL keying material exporter when possible
+ - do not export TLS keys in FIPS mode
+ - remove MD5 from CONFIG_FIPS=y builds
+ - use OpenSSL function for PKBDF2 passphrase-to-PSK
+ - use OpenSSL HMAC implementation
+ - mix RAND_bytes() output into random_get_bytes() to force OpenSSL
+ DRBG to be used in FIPS mode
+ - use OpenSSL CMAC implementation
+ * added mechanism to disable TLS Session Ticket extension
+ - a workaround for servers that do not support TLS extensions that
+ was enabled by default in recent OpenSSL versions
+ - tls_disable_session_ticket=1
+ - automatically disable TLS Session Ticket extension by default when
+ using EAP-TLS/PEAP/TTLS (i.e., only use it with EAP-FAST)
+ * changed VENDOR-TEST EAP method to use proper private enterprise number
+ (this will not interoperate with older versions)
+ * disable network block temporarily on authentication failures
+ * improved WPS AP selection during WPS PIN iteration
+ * added support for configuring GCMP cipher for IEEE 802.11ad
+ * added support for Wi-Fi Display extensions
+ - WFD_SUBELEMENT_SET ctrl_iface command to configure WFD subelements
+ - SET wifi_display <0/1> to disable/enable WFD support
+ - WFD service discovery
+ - an external program is needed to manage the audio/video streaming
+ and codecs
+ * optimized scan result use for network selection
+ - use the internal BSS table instead of raw scan results
+ - allow unnecessary scans to be skipped if fresh information is
+ available (e.g., after GAS/ANQP round for Interworking)
+ * added support for 256-bit AES with internal TLS implementation
+ * allow peer to propose channel in P2P invitation process for a
+ persistent group
+ * added disallow_aps parameter to allow BSSIDs/SSIDs to be disallowed
+ from network selection
+ * re-enable the networks disabled during WPS operations
+ * allow P2P functionality to be disabled per interface (p2p_disabled=1)
+ * added secondary device types into P2P_PEER output
+ * added an option to disable use of a separate P2P group interface
+ (p2p_no_group_iface=1)
+ * fixed P2P Bonjour SD to match entries with both compressed and not
+ compressed domain name format and support multiple Bonjour PTR matches
+ for the same key
+ * use deauthentication instead of disassociation for all disconnection
+ operations; this removes the now unused disassociate() wpa_driver_ops
+ callback
+ * optimized PSK generation on P2P GO by caching results to avoid
+ multiple PBKDF2 operations
+ * added okc=1 global configuration parameter to allow OKC to be enabled
+ by default for all network blocks
+ * added a workaround for WPS PBC session overlap detection to avoid
+ interop issues with deployed station implementations that do not
+ remove active PBC indication from Probe Request frames properly
+ * added basic support for 60 GHz band
+ * extend EAPOL frames processing workaround for roaming cases
+ (postpone processing of unexpected EAPOL frame until association
+ event to handle reordered events)
+
+2012-05-10 - v1.0
+ * bsd: Add support for setting HT values in IFM_MMASK.
+ * Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
+ This allows the driver to use PS buffering of Deauthentication and
+ Disassociation frames when the STA is in power save sleep. Only
+ available with drivers that provide TX status events for Deauth/
+ Disassoc frames (nl80211).
+ * Drop oldest unknown BSS table entries first. This makes it less
+ likely to hit connection issues in environments with huge number
+ of visible APs.
+ * Add systemd support.
+ * Add support for setting the syslog facility from the config file
+ at build time.
+ * atheros: Add support for IEEE 802.11w configuration.
+ * AP mode: Allow enable HT20 if driver supports it, by setting the
+ config parameter ieee80211n.
+ * Allow AP mode to disconnect STAs based on low ACK condition (when
+ the data connection is not working properly, e.g., due to the STA
+ going outside the range of the AP). Disabled by default, enable by
+ config option disassoc_low_ack.
+ * nl80211:
+ - Support GTK rekey offload.
+ - Support PMKSA candidate events. This adds support for RSN
+ pre-authentication with nl80211 interface and drivers that handle
+ roaming internally.
+ * dbus:
+ - Add a DBus signal for EAP SM requests, emitted on the Interface
+ object.
+ - Export max scan ssids supported by the driver as MaxScanSSID.
+ - Add signal Certification for information about server certification.
+ - Add BSSExpireAge and BSSExpireCount interface properties and
+ support set/get, which allows for setting BSS cache expiration age
+ and expiration scan count.
+ - Add ConfigFile to AddInterface properties.
+ - Add Interface.Country property and support to get/set the value.
+ - Add DBus property CurrentAuthMode.
+ - P2P DBus API added.
+ - Emit property changed events (for property BSSs) when adding/
+ removing BSSs.
+ - Treat '' in SSIDs of Interface.Scan as a request for broadcast
+ scan, instead of ignoring it.
+ - Add DBus getter/setter for FastReauth.
+ - Raise PropertiesChanged on org.freedesktop.DBus.Properties.
+ * wpa_cli:
+ - Send AP-STA-DISCONNECTED event when an AP disconnects a station
+ due to inactivity.
+ - Make second argument to set command optional. This can be used to
+ indicate a zero length value.
+ - Add signal_poll command.
+ - Add bss_expire_age and bss_expire_count commands to set/get BSS
+ cache expiration age and expiration scan count.
+ - Add ability to set scan interval (the time in seconds wpa_s waits
+ before requesting a new scan after failing to find a suitable
+ network in scan results) using scan_interval command.
+ - Add event CTRL-EVENT-ASSOC-REJECT for association rejected.
+ - Add command get version, that returns wpa_supplicant version string.
+ - Add command sta_autoconnect for disabling automatic reconnection
+ on receiving disconnection event.
+ - Setting bssid parameter to an empty string "" or any can now be
+ used to clear the bssid_set flag in a network block, i.e., to remove
+ bssid filtering.
+ - Add tdls_testing command to add a special testing feature for
+ changing TDLS behavior. Build param CONFIG_TDLS_TESTING must be
+ enabled as well.
+ - For interworking, add wpa_cli commands interworking_select,
+ interworking_connect, anqp_get, fetch_anqp, and stop_fetch_anqp.
+ - Many P2P commands were added. See README-P2P.
+ - Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
+ - Allow set command to change global config parameters.
+ - Add log_level command, which can be used to display the current
+ debugging level and to change the log level during run time.
+ - Add note command, which can be used to insert notes to the debug
+ log.
+ - Add internal line edit implementation. CONFIG_WPA_CLI_EDIT=y
+ can now be used to build wpa_cli with internal implementation of
+ line editing and history support. This can be used as a replacement
+ for CONFIG_READLINE=y.
+ * AP mode: Add max_num_sta config option, which can be used to limit
+ the number of stations allowed to connect to the AP.
+ * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
+ config file.
+ * wext: Increase scan timeout from 5 to 10 seconds.
+ * Add blacklist command, allowing an external program to
+ manage the BSS blacklist and display its current contents.
+ * WPS:
+ - Add wpa_cli wps_pin get command for generating random PINs. This can
+ be used in a UI to generate a PIN without starting WPS (or P2P)
+ operation.
+ - Set RF bands based on driver capabilities, instead of hardcoding
+ them.
+ - Add mechanism for indicating non-standard WPS errors.
+ - Add CONFIG_WPS_REG_DISABLE_OPEN=y option to disable open networks
+ by default.
+ - Add wps_ap_pin cli command for wpa_supplicant AP mode.
+ - Add wps_check_pin cli command for processing PIN from user input.
+ UIs can use this command to process a PIN entered by a user and to
+ validate the checksum digit (if present).
+ - Cancel WPS operation on PBC session overlap detection.
+ - New wps_cancel command in wpa_cli will cancel a pending WPS
+ operation.
+ - wpa_cli action: Add WPS_EVENT_SUCCESS and WPS_EVENT_FAIL handlers.
+ - Trigger WPS config update on Manufacturer, Model Name, Model
+ Number, and Serial Number changes.
+ - Fragment size is now configurable for EAP-WSC peer. Use
+ wpa_cli set wps_fragment_size <val>.
+ - Disable AP PIN after 10 consecutive failures. Slow down attacks on
+ failures up to 10.
+ - Allow AP to start in Enrollee mode without AP PIN for probing, to
+ be compatible with Windows 7.
+ - Add Config Error into WPS-FAIL events to provide more info to the
+ user on how to resolve the issue.
+ - Label and Display config methods are not allowed to be enabled
+ at the same time, since it is unclear which PIN to use if both
+ methods are advertised.
+ - When controlling multiple interfaces:
+ - apply WPS commands to all interfaces configured to use WPS
+ - apply WPS config changes to all interfaces that use WPS
+ - when an attack is detected on any interface, disable AP PIN on
+ all interfaces
+ * WPS ER:
+ - Add special AP Setup Locked mode to allow read only ER.
+ ap_setup_locked=2 can now be used to enable a special mode where
+ WPS ER can learn the current AP settings, but cannot change them.
+ - Show SetSelectedRegistrar events as ctrl_iface events
+ - Add wps_er_set_config to enroll a network based on a local
+ network configuration block instead of having to (re-)learn the
+ current AP settings with wps_er_learn.
+ - Allow AP filtering based on IP address, add ctrl_iface event for
+ learned AP settings, add wps_er_config command to configure an AP.
+ * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
+ - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
+ for testing protocol extensibility.
+ - Add build option CONFIG_WPS_STRICT to allow disabling of WPS
+ workarounds.
+ - Add support for AuthorizedMACs attribute.
+ * TDLS:
+ - Propagate TDLS related nl80211 capability flags from kernel and
+ add them as driver capability flags. If the driver doesn't support
+ capabilities, assume TDLS is supported internally. When TDLS is
+ explicitly not supported, disable all user facing TDLS operations.
+ - Allow TDLS to be disabled at runtime (mostly for testing).
+ Use set tdls_disabled.
+ - Honor AP TDLS settings that prohibit/allow TDLS.
+ - Add a special testing feature for changing TDLS behavior. Use
+ CONFIG_TDLS_TESTING build param to enable. Configure at runtime
+ with tdls_testing cli command.
+ - Add support for TDLS 802.11z.
+ * wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
+ wlantest can be used to capture frames from a monitor interface
+ for realtime capturing or from pcap files for offline analysis.
+ * Interworking: Support added for 802.11u. Enable in .config with
+ CONFIG_INTERWORKING. See wpa_supplicant.conf for config parameters
+ for interworking. wpa_cli commands added to support this are
+ interworking_select, interworking_connect, anqp_get, fetch_anqp,
+ and stop_fetch_anqp.
+ * Android: Add build and runtime support for Android wpa_supplicant.
+ * bgscan learn: Add new bgscan that learns BSS information based on
+ previous scans, and uses that information to dynamically generate
+ the list of channels for background scans.
+ * Add a new debug message level for excessive information. Use
+ -ddd to enable.
+ * TLS: Add support for tls_disable_time_checks=1 in client mode.
+ * Internal TLS:
+ - Add support for TLS v1.1 (RFC 4346). Enable with build parameter
+ CONFIG_TLSV11.
+ - Add domainComponent parser for X.509 names.
+ * Linux: Add RFKill support by adding an interface state "disabled".
+ * Reorder some IEs to get closer to IEEE 802.11 standard. Move
+ WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
+ Move HT IEs to be later in (Re)Assoc Resp.
+ * Solaris: Add support for wired 802.1X client.
+ * Wi-Fi Direct support. See README-P2P for more information.
+ * Many bugfixes.
+
+2010-04-18 - v0.7.2
+ * nl80211: fixed number of issues with roaming
+ * avoid unnecessary roaming if multiple APs with similar signal
+ strength are present in scan results
+ * add TLS client events and server probing to ease design of
+ automatic detection of EAP parameters
+ * add option for server certificate matching (SHA256 hash of the
+ certificate) instead of trusted CA certificate configuration
+ * bsd: Cleaned up driver wrapper and added various low-level
+ configuration options
+ * wpa_gui-qt4: do not show too frequent WPS AP available events as
+ tray messages
+ * TNC: fixed issues with fragmentation
+ * EAP-TNC: add Flags field into fragment acknowledgement (needed to
+ interoperate with other implementations; may potentially breaks
+ compatibility with older wpa_supplicant/hostapd versions)
+ * wpa_cli: added option for using a separate process to receive event
+ messages to reduce latency in showing these
+ (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
+ * maximum BSS table size can now be configured (bss_max_count)
+ * BSSes to be included in the BSS table can be filtered based on
+ configured SSIDs to save memory (filter_ssids)
+ * fix number of issues with IEEE 802.11r/FT; this version is not
+ backwards compatible with old versions
+ * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
+ and over-the-DS)
+ * add freq_list network configuration parameter to allow the AP
+ selection to filter out entries based on the operating channel
+ * add signal strength change events for bgscan; this allows more
+ dynamic changes to background scanning interval based on changes in
+ the signal strength with the current AP; this improves roaming within
+ ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
+ configuration block to request background scans less frequently when
+ signal strength remains good and to automatically trigger background
+ scans whenever signal strength drops noticeably
+ (this is currently only available with nl80211)
+ * add BSSID and reason code (if available) to disconnect event messages
+ * wpa_gui-qt4: more complete support for translating the GUI with
+ linguist and add German translation
+ * fix DH padding with internal crypto code (mainly, for WPS)
+ * do not trigger initial scan automatically anymore if there are no
+ enabled networks
+
+2010-01-16 - v0.7.1
+ * cleaned up driver wrapper API (struct wpa_driver_ops); the new API
+ is not fully backwards compatible, so out-of-tree driver wrappers
+ will need modifications
+ * cleaned up various module interfaces
+ * merge hostapd and wpa_supplicant developers' documentation into a
+ single document
+ * nl80211: use explicit deauthentication to clear cfg80211 state to
+ avoid issues when roaming between APs
+ * dbus: major design changes in the new D-Bus API
+ (fi.w1.wpa_supplicant1)
+ * nl80211: added support for IBSS networks
+ * added internal debugging mechanism with backtrace support and memory
+ allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
+ * added WPS ER unsubscription command to more cleanly unregister from
+ receiving UPnP events when ER is terminated
+ * cleaned up AP mode operations to avoid need for virtual driver_ops
+ wrapper
+ * added BSS table to maintain more complete scan result information
+ over multiple scans (that may include only partial results)
+ * wpa_gui-qt4: update Peers dialog information more dynamically while
+ the dialog is kept open
+ * fixed PKCS#12 use with OpenSSL 1.0.0
+ * driver_wext: Added cfg80211-specific optimization to avoid some
+ unnecessary scans and to speed up association
+
+2009-11-21 - v0.7.0
+ * increased wpa_cli ping interval to 5 seconds and made this
+ configurable with a new command line options (-G<seconds>)
+ * fixed scan buffer processing with WEXT to handle up to 65535
+ byte result buffer (previously, limited to 32768 bytes)
+ * allow multiple driver wrappers to be specified on command line
+ (e.g., -Dnl80211,wext); the first one that is able to initialize the
+ interface will be used
+ * added support for multiple SSIDs per scan request to optimize
+ scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
+ SSIDs); this requires driver support and can currently be used only
+ with nl80211
+ * added support for WPS USBA out-of-band mechanism with USB Flash
+ Drives (UFD) (CONFIG_WPS_UFD=y)
+ * driver_ndis: add PAE group address to the multicast address list to
+ fix wired IEEE 802.1X authentication
+ * fixed IEEE 802.11r key derivation function to match with the standard
+ (note: this breaks interoperability with previous version) [Bug 303]
+ * added better support for drivers that allow separate authentication
+ and association commands (e.g., mac80211-based Linux drivers with
+ nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
+ to be used (IEEE 802.11r)
+ * fixed SHA-256 based key derivation function to match with the
+ standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
+ (note: this breaks interoperability with previous version) [Bug 307]
+ * use shared driver wrapper files with hostapd
+ * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
+ block; this can be used for open and WPA2-Personal networks
+ (optionally, with WPS); this links in parts of hostapd functionality
+ into wpa_supplicant
+ * wpa_gui-qt4: added new Peers dialog to show information about peers
+ (other devices, including APs and stations, etc. in the neighborhood)
+ * added support for WPS External Registrar functionality (configure APs
+ and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
+ and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
+ wps_er_pbc, wps_er_learn
+ (this can also be used with a new 'none' driver wrapper if no
+ wireless device or IEEE 802.1X on wired is needed)
+ * driver_nl80211: multiple updates to provide support for new Linux
+ nl80211/mac80211 functionality
+ * updated management frame protection to use IEEE Std 802.11w-2009
+ * fixed number of small WPS issues and added workarounds to
+ interoperate with common deployed broken implementations
+ * added support for NFC out-of-band mechanism with WPS
+ * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
+ address frames
+ * added preliminary support for IEEE 802.11r RIC processing
+ * added support for specifying subset of enabled frequencies to scan
+ (scan_freq option in the network configuration block); this can speed
+ up scanning process considerably if it is known that only a small
+ subset of channels is actually used in the network (this is currently
+ supported only with -Dnl80211)
+ * added a workaround for race condition between receiving the
+ association event and the following EAPOL-Key
+ * added background scan and roaming infrastructure to allow
+ network-specific optimizations to be used to improve roaming within
+ an ESS (same SSID)
+ * added new DBus interface (fi.w1.wpa_supplicant1)
+
+2009-01-06 - v0.6.7
+ * added support for Wi-Fi Protected Setup (WPS)
+ (wpa_supplicant can now be configured to act as a WPS Enrollee to
+ enroll credentials for a network using PIN and PBC methods; in
+ addition, wpa_supplicant can act as a wireless WPS Registrar to
+ configure an AP); WPS support can be enabled by adding CONFIG_WPS=y
+ into .config and setting the runtime configuration variables in
+ wpa_supplicant.conf (see WPS section in the example configuration
+ file); new wpa_cli commands wps_pin, wps_pbc, and wps_reg are used to
+ manage WPS negotiation; see README-WPS for more details
+ * added support for EAP-AKA' (draft-arkko-eap-aka-kdf)
+ * added support for using driver_test over UDP socket
+ * fixed PEAPv0 Cryptobinding interoperability issue with Windows Server
+ 2008 NPS; optional cryptobinding is now enabled (again) by default
+ * fixed PSK editing in wpa_gui
+ * changed EAP-GPSK to use the IANA assigned EAP method type 51
+ * added a Windows installer that includes WinPcap and all the needed
+ DLLs; in addition, it set up the registry automatically so that user
+ will only need start wpa_gui to get prompted to start the wpasvc
+ servide and add a new interface if needed through wpa_gui dialog
+ * updated management frame protection to use IEEE 802.11w/D7.0
+
+2008-11-23 - v0.6.6
+ * added Milenage SIM/USIM emulator for EAP-SIM/EAP-AKA
+ (can be used to simulate test SIM/USIM card with a known private key;
+ enable with CONFIG_SIM_SIMULATOR=y/CONFIG_USIM_SIMULATOR=y in .config
+ and password="Ki:OPc"/password="Ki:OPc:SQN" in network configuration)
+ * added a new network configuration option, wpa_ptk_rekey, that can be
+ used to enforce frequent PTK rekeying, e.g., to mitigate some attacks
+ against TKIP deficiencies
+ * added an optional mitigation mechanism for certain attacks against
+ TKIP by delaying Michael MIC error reports by a random amount of time
+ between 0 and 60 seconds; this can be enabled with a build option
+ CONFIG_DELAYED_MIC_ERROR_REPORT=y in .config
+ * fixed EAP-AKA to use RES Length field in AT_RES as length in bits,
+ not bytes
+ * updated OpenSSL code for EAP-FAST to use an updated version of the
+ session ticket overriding API that was included into the upstream
+ OpenSSL 0.9.9 tree on 2008-11-15 (no additional OpenSSL patch is
+ needed with that version anymore)
+ * updated userspace MLME instructions to match with the current Linux
+ mac80211 implementation; please also note that this can only be used
+ with driver_nl80211.c (the old code from driver_wext.c was removed)
+ * added support (Linux only) for RoboSwitch chipsets (often found in
+ consumer grade routers); driver interface 'roboswitch'
+ * fixed canceling of PMKSA caching when using drivers that generate
+ RSN IE and refuse to drop PMKIDs that wpa_supplicant does not know
+ about
+
+2008-11-01 - v0.6.5
+ * added support for SHA-256 as X.509 certificate digest when using the
+ internal X.509/TLSv1 implementation
+ * updated management frame protection to use IEEE 802.11w/D6.0
+ * added support for using SHA256-based stronger key derivation for WPA2
+ (IEEE 802.11w)
+ * fixed FT (IEEE 802.11r) authentication after a failed association to
+ use correct FTIE
+ * added support for configuring Phase 2 (inner/tunneled) authentication
+ method with wpa_gui-qt4
+
+2008-08-10 - v0.6.4
+ * added support for EAP Sequences in EAP-FAST Phase 2
+ * added support for using TNC with EAP-FAST
+ * added driver_ps3 for the PS3 Linux wireless driver
+ * added support for optional cryptobinding with PEAPv0
+ * fixed the OpenSSL patches (0.9.8g and 0.9.9) for EAP-FAST to
+ allow fallback to full handshake if server rejects PAC-Opaque
+ * added fragmentation support for EAP-TNC
+ * added support for parsing PKCS #8 formatted private keys into the
+ internal TLS implementation (both PKCS #1 RSA key and PKCS #8
+ encapsulated RSA key can now be used)
+ * added option of using faster, but larger, routines in the internal
+ LibTomMath (for internal TLS implementation) to speed up DH and RSA
+ calculations (CONFIG_INTERNAL_LIBTOMMATH_FAST=y)
+ * fixed race condition between disassociation event and group key
+ handshake to avoid getting stuck in incorrect state [Bug 261]
+ * fixed opportunistic key caching (proactive_key_caching)
+
+2008-02-22 - v0.6.3
+ * removed 'nai' and 'eappsk' network configuration variables that were
+ previously used for configuring user identity and key for EAP-PSK,
+ EAP-PAX, EAP-SAKE, and EAP-GPSK. 'identity' field is now used as the
+ replacement for 'nai' (if old configuration used a separate
+ 'identity' value, that would now be configured as
+ 'anonymous_identity'). 'password' field is now used as the
+ replacement for 'eappsk' (it can also be set using hexstring to
+ present random binary data)
+ * removed '-w' command line parameter (wait for interface to be added,
+ if needed); cleaner way of handling this functionality is to use an
+ external mechanism (e.g., hotplug scripts) that start wpa_supplicant
+ when an interface is added
+ * updated FT support to use the latest draft, IEEE 802.11r/D9.0
+ * added ctrl_iface monitor event (CTRL-EVENT-SCAN-RESULTS) for
+ indicating when new scan results become available
+ * added new ctrl_iface command, BSS, to allow scan results to be
+ fetched without hitting the message size limits (this command
+ can be used to iterate through the scan results one BSS at the time)
+ * fixed EAP-SIM not to include AT_NONCE_MT and AT_SELECTED_VERSION
+ attributes in EAP-SIM Start/Response when using fast reauthentication
+ * fixed EAPOL not to end up in infinite loop when processing dynamic
+ WEP keys with IEEE 802.1X
+ * fixed problems in getting NDIS events from WMI on Windows 2000
+
+2008-01-01 - v0.6.2
+ * added support for Makefile builds to include debug-log-to-a-file
+ functionality (CONFIG_DEBUG_FILE=y and -f<path> on command line)
+ * fixed EAP-SIM and EAP-AKA message parser to validate attribute
+ lengths properly to avoid potential crash caused by invalid messages
+ * added data structure for storing allocated buffers (struct wpabuf);
+ this does not affect wpa_supplicant usage, but many of the APIs
+ changed and various interfaces (e.g., EAP) is not compatible with old
+ versions
+ * added support for protecting EAP-AKA/Identity messages with
+ AT_CHECKCODE (optional feature in RFC 4187)
+ * added support for protected result indication with AT_RESULT_IND for
+ EAP-SIM and EAP-AKA (phase1="result_ind=1")
+ * added driver_wext workaround for race condition between scanning and
+ association with drivers that take very long time to scan all
+ channels (e.g., madwifi with dual-band cards); wpa_supplicant is now
+ using a longer hardcoded timeout for the scan if the driver supports
+ notifications for scan completion (SIOCGIWSCAN event); this helps,
+ e.g., in cases where wpa_supplicant and madwifi driver ended up in
+ loop where the driver did not even try to associate
+ * stop EAPOL timer tick when no timers are in use in order to reduce
+ power consumption (no need to wake up the process once per second)
+ [Bug 237]
+ * added support for privilege separation (run only minimal part of
+ wpa_supplicant functionality as root and rest as unprivileged,
+ non-root process); see 'Privilege separation' in README for details;
+ this is disabled by default and can be enabled with CONFIG_PRIVSEP=y
+ in .config
+ * changed scan results data structure to include all information
+ elements to make it easier to support new IEs; old get_scan_result()
+ driver_ops is still supported for backwards compatibility (results
+ are converted internally to the new format), but all drivers should
+ start using the new get_scan_results2() to make them more likely to
+ work with new features
+ * Qt4 version of wpa_gui (wpa_gui-qt4 subdirectory) is now native Qt4
+ application, i.e., it does not require Qt3Support anymore; Windows
+ binary of wpa_gui.exe is now from this directory and only requires
+ QtCore4.dll and QtGui4.dll libraries
+ * updated Windows binary build to use Qt 4.3.3 and made Qt DLLs
+ available as a separate package to make wpa_gui installation easier:
+ http://w1.fi/wpa_supplicant/qt4/wpa_gui-qt433-windows-dll.zip
+ * added support for EAP-IKEv2 (draft-tschofenig-eap-ikev2-15.txt);
+ only shared key/password authentication is supported in this version
+
+2007-11-24 - v0.6.1
+ * added support for configuring password as NtPasswordHash
+ (16-byte MD4 hash of password) in hash:<32 hex digits> format
+ * added support for fallback from abbreviated TLS handshake to
+ full handshake when using EAP-FAST (e.g., due to an expired
+ PAC-Opaque)
+ * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest
+ draft (draft-ietf-emu-eap-gpsk-07.txt)
+ * added support for drivers that take care of RSN 4-way handshake
+ internally (WPA_DRIVER_FLAGS_4WAY_HANDSHAKE in get_capa flags and
+ WPA_ALG_PMK in set_key)
+ * added an experimental port for Mac OS X (CONFIG_DRIVER_OSX=y in
+ .config); this version supports only ap_scan=2 mode and allow the
+ driver to take care of the 4-way handshake
+ * fixed a buffer overflow in parsing TSF from scan results when using
+ driver_wext.c with a driver that includes the TSF (e.g., iwl4965)
+ [Bug 232]
+ * updated FT support to use the latest draft, IEEE 802.11r/D8.0
+ * fixed an integer overflow issue in the ASN.1 parser used by the
+ (experimental) internal TLS implementation to avoid a potential
+ buffer read overflow
+ * fixed a race condition with -W option (wait for a control interface
+ monitor before starting) that could have caused the first messages to
+ be lost
+ * added support for processing TNCC-TNCS-Messages to report
+ recommendation (allow/none/isolate) when using TNC [Bug 243]
+
+2007-05-28 - v0.6.0
+ * added network configuration parameter 'frequency' for setting
+ initial channel for IBSS (adhoc) networks
+ * added experimental IEEE 802.11r/D6.0 support
+ * updated EAP-SAKE to RFC 4763 and the IANA-allocated EAP type 48
+ * updated EAP-PSK to use the IANA-allocated EAP type 47
+ * fixed EAP-PAX key derivation
+ * fixed EAP-PSK bit ordering of the Flags field
+ * fixed EAP-PEAP/TTLS/FAST to use the correct EAP identifier in
+ tunnelled identity request (previously, the identifier from the outer
+ method was used, not the tunnelled identifier which could be
+ different)
+ * added support for fragmentation of outer TLS packets during Phase 2
+ of EAP-PEAP/TTLS/FAST
+ * fixed EAP-TTLS AVP parser processing for too short AVP lengths
+ * added support for EAP-FAST authentication with inner methods that
+ generate MSK (e.g., EAP-MSCHAPv2 that was previously only supported
+ for PAC provisioning)
+ * added support for authenticated EAP-FAST provisioning
+ * added support for configuring maximum number of EAP-FAST PACs to
+ store in a PAC list (fast_max_pac_list_len=<max> in phase1 string)
+ * added support for storing EAP-FAST PACs in binary format
+ (fast_pac_format=binary in phase1 string)
+ * fixed dbus ctrl_iface to validate message interface before
+ dispatching to avoid a possible segfault [Bug 190]
+ * fixed PeerKey key derivation to use the correct PRF label
+ * updated Windows binary build to link against OpenSSL 0.9.8d and
+ added support for EAP-FAST
+ * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest
+ draft (draft-ietf-emu-eap-gpsk-04.txt)
+ * fixed EAP-AKA Notification processing to allow Notification to be
+ processed after AKA Challenge response has been sent
+ * updated to use IEEE 802.11w/D2.0 for management frame protection
+ (still experimental)
+ * fixed EAP-TTLS implementation not to crash on use of freed memory
+ if TLS library initialization fails
+ * added support for EAP-TNC (Trusted Network Connect)
+ (this version implements the EAP-TNC method and EAP-TTLS changes
+ needed to run two methods in sequence (IF-T) and the IF-IMC and
+ IF-TNCCS interfaces from TNCC)
+
+2006-11-24 - v0.5.6
+ * added experimental, integrated TLSv1 client implementation with the
+ needed X.509/ASN.1/RSA/bignum processing (this can be enabled by
+ setting CONFIG_TLS=internal and CONFIG_INTERNAL_LIBTOMMATH=y in
+ .config); this can be useful, e.g., if the target system does not
+ have a suitable TLS library and a minimal code size is required
+ (total size of this internal TLS/crypto code is bit under 50 kB on
+ x86 and the crypto code is shared by rest of the supplicant so some
+ of it was already required; TLSv1/X.509/ASN.1/RSA added about 25 kB)
+ * removed STAKey handshake since PeerKey handshake has replaced it in
+ IEEE 802.11ma and there are no known deployments of STAKey
+ * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest
+ draft (draft-ietf-emu-eap-gpsk-01.txt)
+ * added preliminary implementation of IEEE 802.11w/D1.0 (management
+ frame protection)
+ (Note: this requires driver support to work properly.)
+ (Note2: IEEE 802.11w is an unapproved draft and subject to change.)
+ * fixed Windows named pipes ctrl_iface to not stop listening for
+ commands if client program opens a named pipe and closes it
+ immediately without sending a command
+ * fixed USIM PIN status determination for the case that PIN is not
+ needed (this allows EAP-AKA to be used with USIM cards that do not
+ use PIN)
+ * added support for reading 3G USIM AID from EF_DIR to allow EAP-AKA to
+ be used with cards that do not support file selection based on
+ partial AID
+ * added support for matching the subjectAltName of the authentication
+ server certificate against multiple name components (e.g.,
+ altsubject_match="DNS:server.example.com;DNS:server2.example.com")
+ * fixed EAP-SIM/AKA key derivation for re-authentication case (only
+ affects IEEE 802.1X with dynamic WEP keys)
+ * changed ctrl_iface network configuration 'get' operations to not
+ return password/key material; if these fields are requested, "*"
+ will be returned if the password/key is set, but the value of the
+ parameter is not exposed
+
+2006-08-27 - v0.5.5
+ * added support for building Windows version with UNICODE defined
+ (wide-char functions)
+ * driver_ndis: fixed static WEP configuration to avoid race condition
+ issues with some NDIS drivers between association and setting WEP
+ keys
+ * driver_ndis: added validation for IELength value in scan results to
+ avoid crashes when using buggy NDIS drivers [Bug 165]
+ * fixed Release|Win32 target in the Visual Studio project files
+ (previously, only Debug|Win32 target was set properly)
+ * changed control interface API call wpa_ctrl_pending() to allow it to
+ return -1 on error (e.g., connection lost); control interface clients
+ will need to make sure that they verify that the value is indeed >0
+ when determining whether there are pending messages
+ * added an alternative control interface backend for Windows targets:
+ Named Pipe (CONFIG_CTRL_IFACE=named_pipe); this is now the default
+ control interface mechanism for Windows builds (previously, UDP to
+ localhost was used)
+ * changed ctrl_interface configuration for UNIX domain sockets:
+ - deprecated ctrl_interface_group variable (it may be removed in
+ future versions)
+ - allow both directory and group be configured with ctrl_interface
+ in following format: DIR=/var/run/wpa_supplicant GROUP=wheel
+ - ctrl_interface=/var/run/wpa_supplicant is still supported for the
+ case when group is not changed
+ * added support for controlling more than one interface per process in
+ Windows version
+ * added a workaround for a case where the AP is using unknown address
+ (e.g., MAC address of the wired interface) as the source address for
+ EAPOL-Key frames; previously, that source address was used as the
+ destination for EAPOL-Key frames and in key derivation; now, BSSID is
+ used even if the source address does not match with it
+ (this resolves an interoperability issue with Thomson SpeedTouch 580)
+ * added a workaround for UDP-based control interface (which was used in
+ Windows builds before this release) to prevent packets with forged
+ addresses from being accepted as local control requests
+ * removed ndis_events.cpp and possibility of using external
+ ndis_events.exe; C version (ndis_events.c) is fully functional and
+ there is no desire to maintain two separate versions of this
+ implementation
+ * ndis_events: Changed NDIS event notification design to use WMI to
+ learn the adapter description through Win32_PnPEntity class; this
+ should fix some cases where the adapter name was not recognized
+ correctly (e.g., with some USB WLAN adapters, e.g., Ralink RT2500
+ USB) [Bug 113]
+ * fixed selection of the first network in ap_scan=2 mode; previously,
+ wpa_supplicant could get stuck in SCANNING state when only the first
+ network for enabled (e.g., after 'wpa_cli select_network 0')
+ * winsvc: added support for configuring ctrl_interface parameters in
+ registry (ctrl_interface string value in
+ HKLM\SOFTWARE\wpa_supplicant\interfaces\0000 key); this new value is
+ required to enable control interface (previously, this was hardcoded
+ to be enabled)
+ * allow wpa_gui subdirectory to be built with both Qt3 and Qt4
+ * converted wpa_gui-qt4 subdirectory to use Qt4 specific project format
+
+2006-06-20 - v0.5.4
+ * fixed build with CONFIG_STAKEY=y [Bug 143]
+ * added support for doing MLME (IEEE 802.11 management frame
+ processing) in wpa_supplicant when using Devicescape IEEE 802.11
+ stack (wireless-dev.git tree)
+ * added a new network block configuration option, fragment_size, to
+ configure the maximum EAP fragment size
+ * driver_ndis: Disable WZC automatically for the selected interface to
+ avoid conflicts with two programs trying to control the radio; WZC
+ will be re-enabled (if it was enabled originally) when wpa_supplicant
+ is terminated
+ * added an experimental TLSv1 client implementation
+ (CONFIG_TLS=internal) that can be used instead of an external TLS
+ library, e.g., to reduce total size requirement on systems that do
+ not include any TLS library by default (this is not yet complete;
+ basic functionality is there, but certificate validation is not yet
+ included)
+ * added PeerKey handshake implementation for IEEE 802.11e
+ direct link setup (DLS) to replace STAKey handshake
+ * fixed WPA PSK update through ctrl_iface for the case where the old
+ PSK was derived from an ASCII passphrase and the new PSK is set as
+ a raw PSK (hex string)
+ * added new configuration option for identifying which network block
+ was used (id_str in wpa_supplicant.conf; included on
+ WPA_EVENT_CONNECT monitor event and as WPA_ID_STR environmental
+ variable in wpa_cli action scripts; in addition WPA_ID variable is
+ set to the current unique identifier that wpa_supplicant assigned
+ automatically for the network and that can be used with
+ GET_NETWORK/SET_NETWORK ctrl_iface commands)
+ * wpa_cli action script is now called only when the connect/disconnect
+ status changes or when associating with a different network
+ * fixed configuration parser not to remove CCMP from group cipher list
+ if WPA-None (adhoc) is used (pairwise=NONE in that case)
+ * fixed integrated NDIS events processing not to hang the process due
+ to a missed change in eloop_win.c API in v0.5.3 [Bug 155]
+ * added support for EAP Generalized Pre-Shared Key (EAP-GPSK,
+ draft-clancy-emu-eap-shared-secret-00.txt)
+ * added Microsoft Visual Studio 2005 solution and project files for
+ build wpa_supplicant for Windows (see vs2005 subdirectory)
+ * eloop_win: fixed unregistration of Windows events
+ * l2_packet_winpcap: fixed a deadlock in deinitializing l2_packet
+ at the end of RSN pre-authentication and added unregistration of
+ a Windows event to avoid getting eloop_win stuck with an invalid
+ handle
+ * driver_ndis: added support for selecting AP based on BSSID
+ * added new environmental variable for wpa_cli action scripts:
+ WPA_CTRL_DIR is the current control interface directory
+ * driver_ndis: added support for using NDISUIO instead of WinPcap for
+ OID set/query operations (CONFIG_USE_NDISUIO=y in .config); with new
+ l2_packet_ndis (CONFIG_L2_PACKET=ndis), this can be used to build
+ wpa_supplicant without requiring WinPcap; note that using NDISUIO
+ requires that WZC is disabled (net stop wzcsvc) since NDISUIO allows
+ only one application to open the device
+ * changed NDIS driver naming to only include device GUID, e.g.,
+ {7EE3EFE5-C165-472F-986D-F6FBEDFE8C8D}, instead of including WinPcap
+ specific \Device\NPF_ prefix before the GUID; the prefix is still
+ allowed for backwards compatibility, but it is not required anymore
+ when specifying the interface
+ * driver_ndis: re-initialize driver interface is the adapter is removed
+ and re-inserted [Bug 159]
+ * driver_madwifi: fixed TKIP and CCMP sequence number configuration on
+ big endian hosts [Bug 146]
+
+2006-04-27 - v0.5.3
+ * fixed EAP-GTC response to include correct user identity when run as
+ phase 2 method of EAP-FAST (i.e., EAP-FAST did not work in v0.5.2)
+ * driver_ndis: Fixed encryption mode configuration for unencrypted
+ networks (some NDIS drivers ignored this, but others, e.g., Broadcom,
+ refused to associate with open networks) [Bug 106]
+ * driver_ndis: use BSSID OID polling to detect when IBSS network is
+ formed even when ndis_events code is included since some NDIS drivers
+ do not generate media connect events in IBSS mode
+ * config_winreg: allow global ctrl_interface parameter to be configured
+ in Windows registry
+ * config_winreg: added support for saving configuration data into
+ Windows registry
+ * added support for controlling network device operational state
+ (dormant/up) for Linux 2.6.17 to improve DHCP processing (see
+ http://www.flamewarmaster.de/software/dhcpclient/ for a DHCP client
+ that can use this information)
+ * driver_wext: added support for WE-21 change to SSID configuration
+ * driver_wext: fixed privacy configuration for static WEP keys mode
+ [Bug 140]
+ * added an optional driver_ops callback for MLME-SETPROTECTION.request
+ primitive
+ * added support for EAP-SAKE (no EAP method number allocated yet, so
+ this is using the same experimental type 255 as EAP-PSK)
+ * added support for dynamically loading EAP methods (.so files) instead
+ of requiring them to be statically linked in; this is disabled by
+ default (see CONFIG_DYNAMIC_EAP_METHODS in defconfig for information
+ on how to use this)
+
+2006-03-19 - v0.5.2
+ * do not try to use USIM APDUs when initializing PC/SC for SIM card
+ access for a network that has not enabled EAP-AKA
+ * fixed EAP phase 2 Nak for EAP-{PEAP,TTLS,FAST} (this was broken in
+ v0.5.1 due to the new support for expanded EAP types)
+ * added support for generating EAP Expanded Nak
+ * try to fetch scan results once before requesting new scan when
+ starting up in ap_scan=1 mode (this can speed up initial association
+ a lot with, e.g., madwifi-ng driver)
+ * added support for receiving EAPOL frames from a Linux bridge
+ interface (-bbr0 on command line)
+ * fixed EAPOL re-authentication for sessions that used PMKSA caching
+ * changed EAP method registration to use a dynamic list of methods
+ instead of a static list generated at build time
+ * fixed PMKSA cache deinitialization not to use freed memory when
+ removing PMKSA entries
+ * fixed a memory leak in EAP-TTLS re-authentication
+ * reject WPA/WPA2 message 3/4 if it does not include any valid
+ WPA/RSN IE
+ * driver_wext: added fallback to use SIOCSIWENCODE for setting auth_alg
+ if the driver does not support SIOCSIWAUTH
+
+2006-01-29 - v0.5.1
+ * driver_test: added better support for multiple APs and STAs by using
+ a directory with sockets that include MAC address for each device in
+ the name (driver_param=test_dir=/tmp/test)
+ * added support for EAP expanded type (vendor specific EAP methods)
+ * added AP_SCAN command into ctrl_iface so that ap_scan configuration
+ option can be changed if needed
+ * wpa_cli/wpa_gui: skip non-socket files in control directory when
+ using UNIX domain sockets; this avoids selecting an incorrect
+ interface (e.g., a PID file could be in this directory, even though
+ use of this directory for something else than socket files is not
+ recommended)
+ * fixed TLS library deinitialization after RSN pre-authentication not
+ to disable TLS library for normal authentication
+ * driver_wext: Remove null-termination from SSID length if the driver
+ used it; some Linux drivers do this and they were causing problems in
+ wpa_supplicant not finding matching configuration block. This change
+ would break a case where the SSID actually ends in '\0', but that is
+ not likely to happen in real use.
+ * fixed PMKSA cache processing not to trigger deauthentication if the
+ current PMKSA cache entry is replaced with a valid new entry
+ * fixed PC/SC initialization for ap_scan != 1 modes (this fixes
+ EAP-SIM and EAP-AKA with real SIM/USIM card when using ap_scan=0 or
+ ap_scan=2)
+
+2005-12-18 - v0.5.0 (beginning of 0.5.x development releases)
+ * added experimental STAKey handshake implementation for IEEE 802.11e
+ direct link setup (DLS); note: this is disabled by default in both
+ build and runtime configuration (can be enabled with CONFIG_STAKEY=y
+ and stakey=1)
+ * fixed EAP-SIM and EAP-AKA pseudonym and fast re-authentication to
+ decrypt AT_ENCR_DATA attributes correctly
+ * fixed EAP-AKA to allow resynchronization within the same session
+ * made code closer to ANSI C89 standard to make it easier to port to
+ other C libraries and compilers
+ * started moving operating system or C library specific functions into
+ wrapper functions defined in os.h and implemented in os_*.c to make
+ code more portable
+ * wpa_supplicant can now be built with Microsoft Visual C++
+ (e.g., with the freely available Toolkit 2003 version or Visual
+ C++ 2005 Express Edition and Platform SDK); see nmake.mak for an
+ example makefile for nmake
+ * added support for using Windows registry for command line parameters
+ (CONFIG_MAIN=main_winsvc) and configuration data
+ (CONFIG_BACKEND=winreg); see win_example.reg for an example registry
+ contents; this version can be run both as a Windows service and as a
+ normal application; 'wpasvc.exe app' to start as applicant,
+ 'wpasvc.exe reg <full path to wpasvc.exe>' to register a service,
+ 'net start wpasvc' to start the service, 'wpasvc.exe unreg' to
+ unregister a service
+ * made it possible to link ndis_events.exe functionality into
+ wpa_supplicant.exe by defining CONFIG_NDIS_EVENTS_INTEGRATED
+ * added better support for multiple control interface backends
+ (CONFIG_CTRL_IFACE option); currently, 'unix' and 'udp' are supported
+ * fixed PC/SC code to use correct length for GSM AUTH command buffer
+ and to not use pioRecvPci with SCardTransmit() calls; these were not
+ causing visible problems with pcsc-lite, but Windows Winscard.dll
+ refused the previously used parameters; this fixes EAP-SIM and
+ EAP-AKA authentication using SIM/USIM card under Windows
+ * added new event loop implementation for Windows using
+ WaitForMultipleObject() instead of select() in order to allow waiting
+ for non-socket objects; this can be selected with
+ CONFIG_ELOOP=eloop_win in .config
+ * added support for selecting l2_packet implementation in .config
+ (CONFIG_L2_PACKET; following options are available now: linux, pcap,
+ winpcap, freebsd, none)
+ * added new l2_packet implementation for WinPcap
+ (CONFIG_L2_PACKET=winpcap) that uses a separate receive thread to
+ reduce latency in EAPOL receive processing from about 100 ms to about
+ 3 ms
+ * added support for EAP-FAST key derivation using other ciphers than
+ RC4-128-SHA for authentication and AES128-SHA for provisioning
+ * added support for configuring CA certificate as DER file and as a
+ configuration blob
+ * fixed private key configuration as configuration blob and added
+ support for using PKCS#12 as a blob
+ * tls_gnutls: added support for using PKCS#12 files; added support for
+ session resumption
+ * added support for loading trusted CA certificates from Windows
+ certificate store: ca_cert="cert_store://<name>", where <name> is
+ likely CA (Intermediate CA certificates) or ROOT (root certificates)
+ * added C version of ndis_events.cpp and made it possible to build this
+ with MinGW so that CONFIG_NDIS_EVENTS_INTEGRATED can be used more
+ easily on cross-compilation builds
+ * added wpasvc.exe into Windows binary release; this is an alternative
+ version of wpa_supplicant.exe with configuration backend using
+ Windows registry and with the entry point designed to run as a
+ Windows service
+ * integrated ndis_events.exe functionality into wpa_supplicant.exe and
+ wpasvc.exe and removed this additional tool from the Windows binary
+ release since it is not needed anymore
+ * load winscard.dll functions dynamically when building with MinGW
+ since MinGW does not yet include winscard library
+
+2005-11-20 - v0.4.7 (beginning of 0.4.x stable releases)
+ * l2_packet_pcap: fixed wired IEEE 802.1X authentication with libpcap
+ and WinPcap to receive frames sent to PAE group address
+ * disable EAP state machine when IEEE 802.1X authentication is not used
+ in order to get rid of bogus "EAP failed" messages
+ * fixed OpenSSL error reporting to go through all pending errors to
+ avoid confusing reports of old errors being reported at later point
+ during handshake
+ * fixed configuration file updating to not write empty variables
+ (e.g., proto or key_mgmt) that the file parser would not accept
+ * fixed ADD_NETWORK ctrl_iface command to use the same default values
+ for variables as empty network definitions read from config file
+ would get
+ * fixed EAP state machine to not discard EAP-Failure messages in many
+ cases (e.g., during TLS handshake)
+ * fixed a infinite loop in private key reading if the configured file
+ cannot be parsed successfully
+ * driver_madwifi: added support for madwifi-ng
+ * wpa_gui: do not display password/PSK field contents
+ * wpa_gui: added CA certificate configuration
+ * driver_ndis: fixed scan request in ap_scan=2 mode not to change SSID
+ * driver_ndis: include Beacon IEs in AssocInfo in order to notice if
+ the new AP is using different WPA/RSN IE
+ * use longer timeout for IEEE 802.11 association to avoid problems with
+ drivers that may take more than five second to associate
+
+2005-10-27 - v0.4.6
+ * allow fallback to WPA, if mixed WPA+WPA2 networks have mismatch in
+ RSN IE, but WPA IE would match with wpa_supplicant configuration
+ * added support for named configuration blobs in order to avoid having
+ to use file system for external files (e.g., certificates);
+ variables can be set to "blob://<blob name>" instead of file path to
+ use a named blob; supported fields: pac_file, client_cert,
+ private_key
+ * fixed RSN pre-authentication (it was broken in the clean up of WPA
+ state machine interface in v0.4.5)
+ * driver_madwifi: set IEEE80211_KEY_GROUP flag for group keys to make
+ sure the driver configures broadcast decryption correctly
+ * added ca_path (and ca_path2) configuration variables that can be used
+ to configure OpenSSL CA path, e.g., /etc/ssl/certs, for using the
+ system-wide trusted CA list
+ * added support for starting wpa_supplicant without a configuration
+ file (-C argument must be used to set ctrl_interface parameter for
+ this case; in addition, -p argument can be used to provide
+ driver_param; these new arguments can also be used with a
+ configuration to override the values from the configuration)
+ * added global control interface that can be optionally used for adding
+ and removing network interfaces dynamically (-g command line argument
+ for both wpa_supplicant and wpa_cli) without having to restart
+ wpa_supplicant process
+ * wpa_gui:
+ - try to save configuration whenever something is modified
+ - added WEP key configuration
+ - added possibility to edit the current network configuration
+ * driver_ndis: fixed driver polling not to increase frequency on each
+ received EAPOL frame due to incorrectly cancelled timeout
+ * added simple configuration file examples (in examples subdirectory)
+ * fixed driver_wext.c to filter wireless events based on ifindex to
+ avoid interfaces receiving events from other interfaces
+ * delay sending initial EAPOL-Start couple of seconds to speed up
+ authentication for the most common case of Authenticator starting
+ EAP authentication immediately after association
+
+2005-09-25 - v0.4.5
+ * added a workaround for clearing keys with ndiswrapper to allow
+ roaming from WPA enabled AP to plaintext one
+ * added docbook documentation (doc/docbook) that can be used to
+ generate, e.g., man pages
+ * l2_packet_linux: use socket type SOCK_DGRAM instead of SOCK_RAW for
+ PF_PACKET in order to prepare for network devices that do not use
+ Ethernet headers (e.g., network stack that includes IEEE 802.11
+ header in the frames)
+ * use receipt of EAPOL-Key frame as a lower layer success indication
+ for EAP state machine to allow recovery from dropped EAP-Success
+ frame
+ * cleaned up internal EAPOL frame processing by not including link
+ layer (Ethernet) header during WPA and EAPOL/EAP processing; this
+ header is added only when transmitted the frame; this makes it easier
+ to use wpa_supplicant on link layers that use different header than
+ Ethernet
+ * updated EAP-PSK to use draft 9 by default since this can now be
+ tested with hostapd; removed support for draft 3, including
+ server_nai configuration option from network blocks
+ * driver_wired: add PAE address to the multicast address list in order
+ to be able to receive EAPOL frames with drivers that do not include
+ these multicast addresses by default
+ * driver_wext: add support for WE-19
+ * added support for multiple configuration backends (CONFIG_BACKEND
+ option); currently, only 'file' is supported (i.e., the format used
+ in wpa_supplicant.conf)
+ * added support for updating configuration ('wpa_cli save_config');
+ this is disabled by default and can be enabled with global
+ update_config=1 variable in wpa_supplicant.conf; this allows wpa_cli
+ and wpa_gui to store the configuration changes in a permanent store
+ * added GET_NETWORK ctrl_iface command
+ (e.g., 'wpa_cli get_network 0 ssid')
+
+2005-08-21 - v0.4.4
+ * replaced OpenSSL patch for EAP-FAST support
+ (openssl-tls-extensions.patch) with a more generic and correct
+ patch (the new patch is not compatible with the previous one, so the
+ OpenSSL library will need to be patched with the new patch in order
+ to be able to build wpa_supplicant with EAP-FAST support)
+ * added support for using Windows certificate store (through CryptoAPI)
+ for client certificate and private key operations (EAP-TLS)
+ (see wpa_supplicant.conf for more information on how to configure
+ this with private_key)
+ * ported wpa_gui to Windows
+ * added Qt4 version of wpa_gui (wpa_gui-qt4 directory); this can be
+ built with the open source version of the Qt4 for Windows
+ * allow non-WPA modes (e.g., IEEE 802.1X with dynamic WEP) to be used
+ with drivers that do not support WPA
+ * ndis_events: fixed Windows 2000 support
+ * added support for enabling/disabling networks from the list of all
+ configured networks ('wpa_cli enable_network <network id>' and
+ 'wpa_cli disable_network <network id>')
+ * added support for adding and removing network from the current
+ configuration ('wpa_cli add_network' and 'wpa_cli remove_network
+ <network id>'); added networks are disabled by default and they can
+ be enabled with enable_network command once the configuration is done
+ for the new network; note: configuration file is not yet updated, so
+ these new networks are lost when wpa_supplicant is restarted
+ * added support for setting network configuration parameters through
+ the control interface, for example:
+ wpa_cli set_network 0 ssid "\"my network\""
+ * fixed parsing of strings that include both " and # within double
+ quoted area (e.g., "start"#end")
+ * added EAP workaround for PEAP session resumption: allow outer,
+ i.e., not tunneled, EAP-Success to terminate session since; this can
+ be disabled with eap_workaround=0
+ (this was allowed for PEAPv1 before, but now it is also allowed for
+ PEAPv0 since at least one RADIUS authentication server seems to be
+ doing this for PEAPv0, too)
+ * wpa_gui: added preliminary support for adding new networks to the
+ wpa_supplicant configuration (double click on the scan results to
+ open network configuration)
+
+2005-06-26 - v0.4.3
+ * removed interface for external EAPOL/EAP supplicant (e.g.,
+ Xsupplicant), (CONFIG_XSUPPLICANT_IFACE) since it is not required
+ anymore and is unlikely to be used by anyone
+ * driver_ndis: fixed WinPcap 3.0 support
+ * fixed build with CONFIG_DNET_PCAP=y on Linux
+ * l2_packet: moved different implementations into separate files
+ (l2_packet_*.c)
+
+2005-06-12 - v0.4.2
+ * driver_ipw: updated driver structures to match with ipw2200-1.0.4
+ (note: ipw2100-1.1.0 is likely to require an update to work with
+ this)
+ * added support for using ap_scan=2 mode with multiple network blocks;
+ wpa_supplicant will go through the networks one by one until the
+ driver reports a successful association; this uses the same order for
+ networks as scan_ssid=1 scans, i.e., the priority field is ignored
+ and the network block order in the file is used instead
+ * fixed a potential issue in RSN pre-authentication ending up using
+ freed memory if pre-authentication times out
+ * added support for matching alternative subject name extensions of the
+ authentication server certificate; new configuration variables
+ altsubject_match and altsubject_match2
+ * driver_ndis: added support for IEEE 802.1X authentication with wired
+ NDIS drivers
+ * added support for querying private key password (EAP-TLS) through the
+ control interface (wpa_cli/wpa_gui) if one is not included in the
+ configuration file
+ * driver_broadcom: fixed couple of memory leaks in scan result
+ processing
+ * EAP-PAX is now registered as EAP type 46
+ * fixed EAP-PAX MAC calculation
+ * fixed EAP-PAX CK and ICK key derivation
+ * added support for using password with EAP-PAX (as an alternative to
+ entering key with eappsk); SHA-1 hash of the password will be used as
+ the key in this case
+ * added support for arbitrary driver interface parameters through the
+ configuration file with a new driver_param field; this adds a new
+ driver_ops function set_param()
+ * added possibility to override l2_packet module with driver interface
+ API (new send_eapol handler); this can be used to implement driver
+ specific TX/RX functions for EAPOL frames
+ * fixed ctrl_interface_group processing for the case where gid is
+ entered as a number, not group name
+ * driver_test: added support for testing hostapd with wpa_supplicant
+ by using test driver interface without any kernel drivers or network
+ cards
+
+2005-05-22 - v0.4.1
+ * driver_madwifi: fixed WPA/WPA2 mode configuration to allow EAPOL
+ packets to be encrypted; this was apparently broken by the changed
+ ioctl order in v0.4.0
+ * driver_madwifi: added preliminary support for compiling against 'BSD'
+ branch of madwifi CVS tree
+ * added support for EAP-MSCHAPv2 password retries within the same EAP
+ authentication session
+ * added support for password changes with EAP-MSCHAPv2 (used when the
+ password has expired)
+ * added support for reading additional certificates from PKCS#12 files
+ and adding them to the certificate chain
+ * fixed association with IEEE 802.1X (no WPA) when dynamic WEP keys
+ were used
+ * fixed a possible double free in EAP-TTLS fast-reauthentication when
+ identity or password is entered through control interface
+ * display EAP Notification messages to user through control interface
+ with "CTRL-EVENT-EAP-NOTIFICATION" prefix
+ * added GUI version of wpa_cli, wpa_gui; this is not build
+ automatically with 'make'; use 'make wpa_gui' to build (this requires
+ Qt development tools)
+ * added 'disconnect' command to control interface for setting
+ wpa_supplicant in state where it will not associate before
+ 'reassociate' command has been used
+ * added support for selecting a network from the list of all configured
+ networks ('wpa_cli select_network <network id>'; this disabled all
+ other networks; to re-enable, 'wpa_cli select_network any')
+ * added support for getting scan results through control interface
+ * added EAP workaround for PEAPv1 session resumption: allow outer,
+ i.e., not tunneled, EAP-Success to terminate session since; this can
+ be disabled with eap_workaround=0
+
+2005-04-25 - v0.4.0 (beginning of 0.4.x development releases)
+ * added a new build time option, CONFIG_NO_STDOUT_DEBUG, that can be
+ used to reduce the size of the wpa_supplicant considerably if
+ debugging code is not needed
+ * fixed EAPOL-Key validation to drop packets with invalid Key Data
+ Length; such frames could have crashed wpa_supplicant due to buffer
+ overflow
+ * added support for wired authentication (IEEE 802.1X on wired
+ Ethernet); driver interface 'wired'
+ * obsoleted set_wpa() handler in the driver interface API (it can be
+ replaced by moving enable/disable functionality into init()/deinit())
+ (calls to set_wpa() are still present for backwards compatibility,
+ but they may be removed in the future)
+ * driver_madwifi: fixed association in plaintext mode
+ * modified the EAP workaround that accepts EAP-Success with incorrect
+ Identifier to be even less strict about verification in order to
+ interoperate with some authentication servers
+ * added support for sending TLS alerts
+ * added support for 'any' SSID wildcard; if ssid is not configured or
+ is set to an empty string, any SSID will be accepted for non-WPA AP
+ * added support for asking PIN (for SIM) from frontends (e.g.,
+ wpa_cli); if a PIN is needed, but not included in the configuration
+ file, a control interface request is sent and EAP processing is
+ delayed until the PIN is available
+ * added support for using external devices (e.g., a smartcard) for
+ private key operations in EAP-TLS (CONFIG_SMARTCARD=y in .config);
+ new wpa_supplicant.conf variables:
+ - global: opensc_engine_path, pkcs11_engine_path, pkcs11_module_path
+ - network: engine, engine_id, key_id
+ * added experimental support for EAP-PAX
+ * added monitor mode for wpa_cli (-a<path to a program to run>) that
+ allows external commands (e.g., shell scripts) to be run based on
+ wpa_supplicant events, e.g., when authentication has been completed
+ and data connection is ready; other related wpa_cli arguments:
+ -B (run in background), -P (write PID file); wpa_supplicant has a new
+ command line argument (-W) that can be used to make it wait until a
+ control interface command is received in order to avoid missing
+ events
+ * added support for opportunistic WPA2 PMKSA key caching (disabled by
+ default, can be enabled with proactive_key_caching=1)
+ * fixed RSN IE in 4-Way Handshake message 2/4 for the case where
+ Authenticator rejects PMKSA caching attempt and the driver is not
+ using assoc_info events
+ * added -P<pid file> argument for wpa_supplicant to write the current
+ process id into a file
+
+2005-02-12 - v0.3.7 (beginning of 0.3.x stable releases)
+ * added new phase1 option parameter, include_tls_length=1, to force
+ wpa_supplicant to add TLS Message Length field to all TLS messages
+ even if the packet is not fragmented; this may be needed with some
+ authentication servers
+ * fixed WPA/RSN IE verification in message 3 of 4-Way Handshake when
+ using drivers that take care of AP selection (e.g., when using
+ ap_scan=2)
+ * fixed reprocessing of pending request after ctrl_iface requests for
+ identity/password/otp
+ * fixed ctrl_iface requests for identity/password/otp in Phase 2 of
+ EAP-PEAP and EAP-TTLS
+ * all drivers using driver_wext: set interface up and select Managed
+ mode when starting wpa_supplicant; set interface down when exiting
+ * renamed driver_ipw2100.c to driver_ipw.c since it now supports both
+ ipw2100 and ipw2200; please note that this also changed the
+ configuration variable in .config to CONFIG_DRIVER_IPW
+
+2005-01-24 - v0.3.6
+ * fixed a busy loop introduced in v0.3.5 for scan result processing
+ when no matching AP is found
+
+2005-01-23 - v0.3.5
+ * added a workaround for an interoperability issue with a Cisco AP
+ when using WPA2-PSK
+ * fixed non-WPA IEEE 802.1X to use the same authentication timeout as
+ WPA with IEEE 802.1X (i.e., timeout 10 -> 70 sec to allow
+ retransmission of dropped frames)
+ * fixed issues with 64-bit CPUs and SHA1 cleanup in previous version
+ (e.g., segfault when processing EAPOL-Key frames)
+ * fixed EAP workaround and fast reauthentication configuration for
+ RSN pre-authentication; previously these were disabled and
+ pre-authentication would fail if the used authentication server
+ requires EAP workarounds
+ * added support for blacklisting APs that fail or timeout
+ authentication in ap_scan=1 mode so that all APs are tried in cases
+ where the ones with strongest signal level are failing authentication
+ * fixed CA certificate loading after a failed EAP-TLS/PEAP/TTLS
+ authentication attempt
+ * allow EAP-PEAP/TTLS fast reauthentication only if Phase 2 succeeded
+ in the previous authentication (previously, only Phase 1 success was
+ verified)
+
+2005-01-09 - v0.3.4
+ * added preliminary support for IBSS (ad-hoc) mode configuration
+ (mode=1 in network block); this included a new key_mgmt mode
+ WPA-NONE, i.e., TKIP or CCMP with a fixed key (based on psk) and no
+ key management; see wpa_supplicant.conf for more details and an
+ example on how to configure this (note: this is currently implemented
+ only for driver_hostapd.c, but the changes should be trivial to add
+ in associate() handler for other drivers, too (assuming the driver
+ supports WPA-None)
+ * added preliminary port for native Windows (i.e., no cygwin) using
+ mingw
+
+2005-01-02 - v0.3.3
+ * added optional support for GNU Readline and History Libraries for
+ wpa_cli (CONFIG_READLINE)
+ * cleaned up EAP state machine <-> method interface and number of
+ small problems with error case processing not terminating on
+ EAP-Failure but waiting for timeout
+ * added couple of workarounds for interoperability issues with a
+ Cisco AP when using WPA2
+ * added support for EAP-FAST (draft-cam-winget-eap-fast-00.txt);
+ Note: This requires a patch for openssl to add support for TLS
+ extensions and number of workarounds for operations without
+ certificates. Proof of concept type of experimental patch is
+ included in openssl-tls-extensions.patch.
+
+2004-12-19 - v0.3.2
+ * fixed private key loading for cases where passphrase is not set
+ * fixed Windows/cygwin L2 packet handler freeing; previous version
+ could cause a segfault when RSN pre-authentication was completed
+ * added support for PMKSA caching with drivers that generate RSN IEs
+ (e.g., NDIS); currently, this is only implemented in driver_ndis.c,
+ but similar code can be easily added to driver_ndiswrapper.c once
+ ndiswrapper gets full support for RSN PMKSA caching
+ * improved recovery from PMKID mismatches by requesting full EAP
+ authentication in case of failed PMKSA caching attempt
+ * driver_ndis: added support for NDIS NdisMIncidateStatus() events
+ (this requires that ndis_events is ran while wpa_supplicant is
+ running)
+ * driver_ndis: use ADD_WEP/REMOVE_WEP when configuring WEP keys
+ * added support for driver interfaces to replace the interface name
+ based on driver/OS specific mapping, e.g., in case of driver_ndis,
+ this allows the beginning of the adapter description to be used as
+ the interface name
+ * added support for CR+LF (Windows-style) line ends in configuration
+ file
+ * driver_ndis: enable radio before starting scanning, disable radio
+ when exiting
+ * modified association event handler to set portEnabled = FALSE before
+ clearing port Valid in order to reset EAP state machine and avoid
+ problems with new authentication getting ignored because of state
+ machines ending up in AUTHENTICATED/SUCCESS state based on old
+ information
+ * added support for driver events to add PMKID candidates in order to
+ allow drivers to give priority to most likely roaming candidates
+ * driver_hostap: moved PrivacyInvoked configuration to associate()
+ function so that this will not be set for plaintext connections
+ * added KEY_MGMT_802_1X_NO_WPA as a new key_mgmt type so that driver
+ interface can distinguish plaintext and IEEE 802.1X (no WPA)
+ authentication
+ * fixed static WEP key configuration to use broadcast/default type for
+ all keys (previously, the default TX key was configured as pairwise/
+ unicast key)
+ * driver_ndis: added legacy WPA capability detection for non-WPA2
+ drivers
+ * added support for setting static WEP keys for IEEE 802.1X without
+ dynamic WEP keying (eapol_flags=0)
+
+2004-12-12 - v0.3.1
+ * added support for reading PKCS#12 (PFX) files (as a replacement for
+ PEM/DER) to get certificate and private key (CONFIG_PKCS12)
+ * fixed compilation with CONFIG_PCSC=y
+ * added new ap_scan mode, ap_scan=2, for drivers that take care of
+ association, but need to be configured with security policy and SSID,
+ e.g., ndiswrapper and NDIS driver; this mode should allow such
+ drivers to work with hidden SSIDs and optimized roaming; when
+ ap_scan=2 is used, only the first network block in the configuration
+ file is used and this configuration should have explicit security
+ policy (i.e., only one option in the lists) for key_mgmt, pairwise,
+ group, proto variables
+ * added experimental port of wpa_supplicant for Windows
+ - driver_ndis.c driver interface (NDIS OIDs)
+ - currently, this requires cygwin and WinPcap
+ - small utility, win_if_list, can be used to get interface name
+ * control interface can now be removed at build time; add
+ CONFIG_CTRL_IFACE=y to .config to maintain old functionality
+ * optional Xsupplicant interface can now be removed at build time;
+ (CONFIG_XSUPPLICANT_IFACE=y in .config to bring it back)
+ * added auth_alg to driver interface associate() parameters to make it
+ easier for drivers to configure authentication algorithm as part of
+ the association
+
+2004-12-05 - v0.3.0 (beginning of 0.3.x development releases)
+ * driver_broadcom: added new driver interface for Broadcom wl.o driver
+ (a generic driver for Broadcom IEEE 802.11a/g cards)
+ * wpa_cli: fixed parsing of -p <path> command line argument
+ * PEAPv1: fixed tunneled EAP-Success reply handling to reply with TLS
+ ACK, not tunneled EAP-Success (of which only the first byte was
+ actually send due to a bug in previous code); this seems to
+ interoperate with most RADIUS servers that implements PEAPv1
+ * PEAPv1: added support for terminating PEAP authentication on tunneled
+ EAP-Success message; this can be configured by adding
+ peap_outer_success=0 on phase1 parameters in wpa_supplicant.conf
+ (some RADIUS servers require this whereas others require a tunneled
+ reply
+ * PEAPv1: changed phase1 option peaplabel to use default to 0, i.e., to
+ the old label for key derivation; previously, the default was 1,
+ but it looks like most existing PEAPv1 implementations use the old
+ label which is thus more suitable default option
+ * added support for EAP-PSK (draft-bersani-eap-psk-03.txt)
+ * fixed parsing of wep_tx_keyidx
+ * added support for configuring list of allowed Phase 2 EAP types
+ (for both EAP-PEAP and EAP-TTLS) instead of only one type
+ * added support for configuring IEEE 802.11 authentication algorithm
+ (auth_alg; mainly for using Shared Key authentication with static
+ WEP keys)
+ * added support for EAP-AKA (with UMTS SIM)
+ * fixed couple of errors in PCSC handling that could have caused
+ random-looking errors for EAP-SIM
+ * added support for EAP-SIM pseudonyms and fast re-authentication
+ * added support for EAP-TLS/PEAP/TTLS fast re-authentication (TLS
+ session resumption)
+ * added support for EAP-SIM with two challenges
+ (phase1="sim_min_num_chal=3" can be used to require three challenges)
+ * added support for configuring DH/DSA parameters for an ephemeral DH
+ key exchange (EAP-TLS/PEAP/TTLS) using new configuration parameters
+ dh_file and dh_file2 (phase 2); this adds support for using DSA keys
+ and optional DH key exchange to achieve forward secracy with RSA keys
+ * added support for matching subject of the authentication server
+ certificate with a substring when using EAP-TLS/PEAP/TTLS; new
+ configuration variables subject_match and subject_match2
+ * changed SSID configuration in driver_wext.c (used by many driver
+ interfaces) to use ssid_len+1 as the length for SSID since some Linux
+ drivers expect this
+ * fixed couple of unaligned reads in scan result parsing to fix WPA
+ connection on some platforms (e.g., ARM)
+ * added driver interface for Intel ipw2100 driver
+ * added support for LEAP with WPA
+ * added support for larger scan results report (old limit was 4 kB of
+ data, i.e., about 35 or so APs) when using Linux wireless extensions
+ v17 or newer
+ * fixed a bug in PMKSA cache processing: skip sending of EAPOL-Start
+ only if there is a PMKSA cache entry for the current AP
+ * fixed error handling for case where reading of scan results fails:
+ must schedule a new scan or wpa_supplicant will remain waiting
+ forever
+ * changed debug output to remove shared password/key material by
+ default; all key information can be included with -K command line
+ argument to match the previous behavior
+ * added support for timestamping debug log messages (disabled by
+ default, can be enabled with -t command line argument)
+ * set pairwise/group cipher suite for non-WPA IEEE 802.1X to WEP-104
+ if keys are not configured to be used; this fixes IEEE 802.1X mode
+ with drivers that use this information to configure whether Privacy
+ bit can be in Beacon frames (e.g., ndiswrapper)
+ * avoid clearing driver keys if no keys have been configured since last
+ key clear request; this seems to improve reliability of group key
+ handshake for ndiswrapper & NDIS driver which seems to be suffering
+ of some kind of timing issue when the keys are cleared again after
+ association
+ * changed driver interface API:
+ - WPA_SUPPLICANT_DRIVER_VERSION define can be used to determine which
+ version is being used (now, this is set to 2; previously, it was
+ not defined)
+ - pass pointer to private data structure to all calls
+ - the new API is not backwards compatible; all in-tree driver
+ interfaces has been converted to the new API
+ * added support for controlling multiple interfaces (radios) per
+ wpa_supplicant process; each interface needs to be listed on the
+ command line (-c, -i, -D arguments) with -N as a separator
+ (-cwpa1.conf -iwlan0 -Dhostap -N -cwpa2.conf -iath0 -Dmadwifi)
+ * added a workaround for EAP servers that incorrectly use same Id for
+ sequential EAP packets
+ * changed libpcap/libdnet configuration to use .config variable,
+ CONFIG_DNET_PCAP, instead of requiring Makefile modification
+ * improved downgrade attack detection in IE verification of msg 3/4:
+ verify both WPA and RSN IEs, if present, not only the selected one;
+ reject the AP if an RSN IE is found in msg 3/4, but not in Beacon or
+ Probe Response frame, and RSN is enabled in wpa_supplicant
+ configuration
+ * fixed WPA msg 3/4 processing to allow Key Data field contain other
+ IEs than just one WPA IE
+ * added support for FreeBSD and driver interface for the BSD net80211
+ layer (CONFIG_DRIVER_BSD=y in .config); please note that some of the
+ required kernel mods have not yet been committed
+ * made EAP workarounds configurable; enabled by default, can be
+ disabled with network block option eap_workaround=0
+
+2004-07-17 - v0.2.4 (beginning of 0.2.x stable releases)
+ * resolved couple of interoperability issues with EAP-PEAPv1 and
+ Phase 2 (inner EAP) fragment reassembly
+ * driver_madwifi: fixed WEP key configuration for IEEE 802.1X when the
+ AP is using non-zero key index for the unicast key and key index zero
+ for the broadcast key
+ * driver_hostap: fixed IEEE 802.1X WEP key updates and
+ re-authentication by allowing unencrypted EAPOL frames when not using
+ WPA
+ * added a new driver interface, 'wext', which uses only standard,
+ driver independent functionality in Linux wireless extensions;
+ currently, this can be used only for non-WPA IEEE 802.1X mode, but
+ eventually, this is to be extended to support full WPA/WPA2 once
+ Linux wireless extensions get support for this
+ * added support for mode in which the driver is responsible for AP
+ scanning and selection; this is disabled by default and can be
+ enabled with global ap_scan=0 variable in wpa_supplicant.conf;
+ this mode can be used, e.g., with generic 'wext' driver interface to
+ use wpa_supplicant as IEEE 802.1X Supplicant with any Linux driver
+ supporting wireless extensions.
+ * driver_madwifi: fixed WPA2 configuration and scan_ssid=1 (e.g.,
+ operation with an AP that does not include SSID in the Beacon frames)
+ * added support for new EAP authentication methods:
+ EAP-TTLS/EAP-OTP, EAP-PEAPv0/OTP, EAP-PEAPv1/OTP, EAP-OTP
+ * added support for asking one-time-passwords from frontends (e.g.,
+ wpa_cli); this 'otp' command works otherwise like 'password' command,
+ but the password is used only once and the frontend will be asked for
+ a new password whenever a request from authenticator requires a
+ password; this can be used with both EAP-OTP and EAP-GTC
+ * changed wpa_cli to automatically re-establish connection so that it
+ does not need to be re-started when wpa_supplicant is terminated and
+ started again
+ * improved user data (identity/password/otp) requests through
+ frontends: process pending EAPOL packets after getting new
+ information so that full authentication does not need to be
+ restarted; in addition, send pending requests again whenever a new
+ frontend is attached
+ * changed control frontends to use a new directory for socket files to
+ make it easier for wpa_cli to automatically select between interfaces
+ and to provide access control for the control interface;
+ wpa_supplicant.conf: ctrl_interface is now a path
+ (/var/run/wpa_supplicant is the recommended path) and
+ ctrl_interface_group can be used to select which group gets access to
+ the control interface;
+ wpa_cli: by default, try to connect to the first interface available
+ in /var/run/wpa_supplicant; this path can be overridden with -p option
+ and an interface can be selected with -i option (i.e., in most common
+ cases, wpa_cli does not need to get any arguments)
+ * added support for LEAP
+ * added driver interface for Linux ndiswrapper
+ * added priority option for network blocks in the configuration file;
+ this allows networks to be grouped based on priority (the scan
+ results are searched for matches with network blocks in this order)
+
+2004-06-20 - v0.2.3
+ * sort scan results to improve AP selection
+ * fixed control interface socket removal for some error cases
+ * improved scan requesting and authentication timeout
+ * small improvements/bug fixes for EAP-MSCHAPv2, EAP-PEAP, and
+ TLS processing
+ * PEAP version can now be forced with phase1="peapver=<ver>"
+ (mostly for testing; by default, the highest version supported by
+ both the Supplicant and Authentication Server is selected
+ automatically)
+ * added support for madwifi driver (Atheros ar521x)
+ * added a workaround for cases where AP sets Install Tx/Rx bit for
+ WPA Group Key messages when pairwise keys are used (without this,
+ the Group Key would be used for Tx and the AP would drop frames
+ from the station)
+ * added GSM SIM/USIM interface for GSM authentication algorithm for
+ EAP-SIM; this requires pcsc-lite
+ * added support for ATMEL AT76C5XXx driver
+ * fixed IEEE 802.1X WEP key derivation in the case where Authenticator
+ does not include key data in the EAPOL-Key frame (i.e., part of
+ EAP keying material is used as data encryption key)
+ * added support for using plaintext and static WEP networks
+ (key_mgmt=NONE)
+
+2004-05-31 - v0.2.2
+ * added support for new EAP authentication methods:
+ EAP-TTLS/EAP-MD5-Challenge
+ EAP-TTLS/EAP-GTC
+ EAP-TTLS/EAP-MSCHAPv2
+ EAP-TTLS/EAP-TLS
+ EAP-TTLS/MSCHAPv2
+ EAP-TTLS/MSCHAP
+ EAP-TTLS/PAP
+ EAP-TTLS/CHAP
+ EAP-PEAP/TLS
+ EAP-PEAP/GTC
+ EAP-PEAP/MD5-Challenge
+ EAP-GTC
+ EAP-SIM (not yet complete; needs GSM/SIM authentication interface)
+ * added support for anonymous identity (to be used when identity is
+ sent in plaintext; real identity will be used within TLS protected
+ tunnel (e.g., with EAP-TTLS)
+ * added event messages from wpa_supplicant to frontends, e.g., wpa_cli
+ * added support for requesting identity and password information using
+ control interface; in other words, the password for EAP-PEAP or
+ EAP-TTLS does not need to be included in the configuration file since
+ a frontand (e.g., wpa_cli) can ask it from the user
+ * improved RSN pre-authentication to use a candidate list and process
+ all candidates from each scan; not only one per scan
+ * fixed RSN IE and WPA IE capabilities field parsing
+ * ignore Tx bit in GTK IE when Pairwise keys are used
+ * avoid making new scan requests during IEEE 802.1X negotiation
+ * use openssl/libcrypto for MD5 and SHA-1 when compiling wpa_supplicant
+ with TLS support (this replaces the included implementation with
+ library code to save about 8 kB since the library code is needed
+ anyway for TLS)
+ * fixed WPA-PSK only mode when compiled without IEEE 802.1X support
+ (i.e., without CONFIG_IEEE8021X_EAPOL=y in .config)
+
+2004-05-06 - v0.2.1
+ * added support for internal IEEE 802.1X (actually, IEEE 802.1aa/D6.1)
+ Supplicant
+ - EAPOL state machines for Supplicant [IEEE 802.1aa/D6.1]
+ - EAP peer state machine [draft-ietf-eap-statemachine-02.pdf]
+ - EAP-MD5 (cannot be used with WPA-RADIUS)
+ [draft-ietf-eap-rfc2284bis-09.txt]
+ - EAP-TLS [RFC 2716]
+ - EAP-MSCHAPv2 (currently used only with EAP-PEAP)
+ - EAP-PEAP/MSCHAPv2 [draft-josefsson-pppext-eap-tls-eap-07.txt]
+ [draft-kamath-pppext-eap-mschapv2-00.txt]
+ (PEAP version 0, 1, and parts of 2; only 0 and 1 are enabled by
+ default; tested with FreeRADIUS, Microsoft IAS, and Funk Odyssey)
+ - new configuration file options: eap, identity, password, ca_cert,
+ client_cert, privatekey, private_key_passwd
+ - Xsupplicant is not required anymore, but it can be used by
+ disabling the internal IEEE 802.1X Supplicant with -e command line
+ option
+ - this code is not included in the default build; Makefile need to
+ be edited for this (uncomment lines for selected functionality)
+ - EAP-TLS and EAP-PEAP require openssl libraries
+ * use module prefix in debug messages (WPA, EAP, EAP-TLS, ..)
+ * added support for non-WPA IEEE 802.1X mode with dynamic WEP keys
+ (i.e., complete IEEE 802.1X/EAP authentication and use IEEE 802.1X
+ EAPOL-Key frames instead of WPA key handshakes)
+ * added support for IEEE 802.11i/RSN (WPA2)
+ - improved PTK Key Handshake
+ - PMKSA caching, pre-authentication
+ * fixed wpa_supplicant to ignore possible extra data after WPA
+ EAPOL-Key packets (this fixes 'Invalid EAPOL-Key MIC when using
+ TPTK' error from message 3 of 4-Way Handshake in case the AP
+ includes extra data after the EAPOL-Key)
+ * added interface for external programs (frontends) to control
+ wpa_supplicant
+ - CLI example (wpa_cli) with interactive mode and command line
+ mode
+ - replaced SIGUSR1 status/statistics with the new control interface
+ * made some feature compile time configurable
+ - .config file for make
+ - driver interfaces (hostap, hermes, ..)
+ - EAPOL/EAP functions
+
+2004-02-15 - v0.2.0
+ * Initial version of wpa_supplicant
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/README b/ap/app/wpa_supplicant-2.10/wpa_supplicant/README
new file mode 100755
index 0000000..c643b26
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/README
@@ -0,0 +1,1163 @@
+wpa_supplicant
+==============
+
+Copyright (c) 2003-2022, Jouni Malinen <j@w1.fi> and contributors
+All Rights Reserved.
+
+This program is licensed under the BSD license (the one with
+advertisement clause removed).
+
+If you are submitting changes to the project, please see CONTRIBUTIONS
+file for more instructions.
+
+
+
+License
+-------
+
+This software may be distributed, used, and modified under the terms of
+BSD license:
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+3. Neither the name(s) of the above-listed copyright holder(s) nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+
+Features
+--------
+
+Supported WPA/IEEE 802.11i features:
+- WPA-PSK ("WPA-Personal")
+- WPA with EAP (e.g., with RADIUS authentication server) ("WPA-Enterprise")
+ Following authentication methods are supported with an integrate IEEE 802.1X
+ Supplicant:
+ * EAP-TLS
+ * EAP-PEAP/MSCHAPv2 (both PEAPv0 and PEAPv1)
+ * EAP-PEAP/TLS (both PEAPv0 and PEAPv1)
+ * EAP-PEAP/GTC (both PEAPv0 and PEAPv1)
+ * EAP-PEAP/OTP (both PEAPv0 and PEAPv1)
+ * EAP-PEAP/MD5-Challenge (both PEAPv0 and PEAPv1)
+ * EAP-TTLS/EAP-MD5-Challenge
+ * EAP-TTLS/EAP-GTC
+ * EAP-TTLS/EAP-OTP
+ * EAP-TTLS/EAP-MSCHAPv2
+ * EAP-TTLS/EAP-TLS
+ * EAP-TTLS/MSCHAPv2
+ * EAP-TTLS/MSCHAP
+ * EAP-TTLS/PAP
+ * EAP-TTLS/CHAP
+ * EAP-SIM
+ * EAP-AKA
+ * EAP-AKA'
+ * EAP-PSK
+ * EAP-PAX
+ * EAP-SAKE
+ * EAP-IKEv2
+ * EAP-GPSK
+ * EAP-pwd
+ * LEAP (note: requires special support from the driver for IEEE 802.11
+ authentication)
+ (following methods are supported, but since they do not generate keying
+ material, they cannot be used with WPA or IEEE 802.1X WEP keying)
+ * EAP-MD5-Challenge
+ * EAP-MSCHAPv2
+ * EAP-GTC
+ * EAP-OTP
+- key management for CCMP, TKIP, WEP104, WEP40
+- RSN/WPA2 (IEEE 802.11i)
+ * pre-authentication
+ * PMKSA caching
+
+Supported TLS/crypto libraries:
+- OpenSSL (default)
+- GnuTLS
+
+Internal TLS/crypto implementation (optional):
+- can be used in place of an external TLS/crypto library
+- TLSv1
+- X.509 certificate processing
+- PKCS #1
+- ASN.1
+- RSA
+- bignum
+- minimal size (ca. 50 kB binary, parts of which are already needed for WPA;
+ TLSv1/X.509/ASN.1/RSA/bignum parts are about 25 kB on x86)
+
+
+Requirements
+------------
+
+Current hardware/software requirements:
+- Linux kernel 2.4.x or 2.6.x with Linux Wireless Extensions v15 or newer
+- FreeBSD 6-CURRENT
+- NetBSD-current
+- Microsoft Windows with WinPcap (at least WinXP, may work with other versions)
+- drivers:
+ Linux drivers that support cfg80211/nl80211. Even though there are
+ number of driver specific interface included in wpa_supplicant, please
+ note that Linux drivers are moving to use generic wireless configuration
+ interface driver_nl80211 (-Dnl80211 on wpa_supplicant command line)
+ should be the default option to start with before falling back to driver
+ specific interface.
+
+ Linux drivers that support WPA/WPA2 configuration with the generic
+ Linux wireless extensions (WE-18 or newer). Obsoleted by nl80211.
+
+ In theory, any driver that supports Linux wireless extensions can be
+ used with IEEE 802.1X (i.e., not WPA) when using ap_scan=0 option in
+ configuration file.
+
+ Wired Ethernet drivers (with ap_scan=0)
+
+ BSD net80211 layer (e.g., Atheros driver)
+ At the moment, this is for FreeBSD 6-CURRENT branch and NetBSD-current.
+
+ Windows NDIS
+ The current Windows port requires WinPcap (http://winpcap.polito.it/).
+ See README-Windows.txt for more information.
+
+wpa_supplicant was designed to be portable for different drivers and
+operating systems. Hopefully, support for more wlan cards and OSes will be
+added in the future. See developer's documentation
+(http://hostap.epitest.fi/wpa_supplicant/devel/) for more information about the
+design of wpa_supplicant and porting to other drivers. One main goal
+is to add full WPA/WPA2 support to Linux wireless extensions to allow
+new drivers to be supported without having to implement new
+driver-specific interface code in wpa_supplicant.
+
+Optional libraries for layer2 packet processing:
+- libpcap (tested with 0.7.2, most relatively recent versions assumed to work,
+ this is likely to be available with most distributions,
+ http://tcpdump.org/)
+- libdnet (tested with v1.4, most versions assumed to work,
+ http://libdnet.sourceforge.net/)
+
+These libraries are _not_ used in the default Linux build. Instead,
+internal Linux specific implementation is used. libpcap/libdnet are
+more portable and they can be used by adding CONFIG_L2_PACKET=pcap into
+.config. They may also be selected automatically for other operating
+systems. In case of Windows builds, WinPcap is used by default
+(CONFIG_L2_PACKET=winpcap).
+
+
+Optional libraries for EAP-TLS, EAP-PEAP, and EAP-TTLS:
+- OpenSSL (tested with 1.0.1 and 1.0.2 versions; assumed to
+ work with most relatively recent versions; this is likely to be
+ available with most distributions, http://www.openssl.org/)
+- GnuTLS
+- internal TLSv1 implementation
+
+One of these libraries is needed when EAP-TLS, EAP-PEAP, EAP-TTLS, or
+EAP-FAST support is enabled. WPA-PSK mode does not require this or EAPOL/EAP
+implementation. A configuration file, .config, for compilation is
+needed to enable IEEE 802.1X/EAPOL and EAP methods. Note that EAP-MD5,
+EAP-GTC, EAP-OTP, and EAP-MSCHAPV2 cannot be used alone with WPA, so
+they should only be enabled if testing the EAPOL/EAP state
+machines. However, there can be used as inner authentication
+algorithms with EAP-PEAP and EAP-TTLS.
+
+See Building and installing section below for more detailed
+information about the wpa_supplicant build time configuration.
+
+
+
+WPA
+---
+
+The original security mechanism of IEEE 802.11 standard was not
+designed to be strong and has proven to be insufficient for most
+networks that require some kind of security. Task group I (Security)
+of IEEE 802.11 working group (http://www.ieee802.org/11/) has worked
+to address the flaws of the base standard and has in practice
+completed its work in May 2004. The IEEE 802.11i amendment to the IEEE
+802.11 standard was approved in June 2004 and published in July 2004.
+
+Wi-Fi Alliance (http://www.wi-fi.org/) used a draft version of the
+IEEE 802.11i work (draft 3.0) to define a subset of the security
+enhancements that can be implemented with existing wlan hardware. This
+is called Wi-Fi Protected Access<TM> (WPA). This has now become a
+mandatory component of interoperability testing and certification done
+by Wi-Fi Alliance. Wi-Fi provides information about WPA at its web
+site (http://www.wi-fi.org/OpenSection/protected_access.asp).
+
+IEEE 802.11 standard defined wired equivalent privacy (WEP) algorithm
+for protecting wireless networks. WEP uses RC4 with 40-bit keys,
+24-bit initialization vector (IV), and CRC32 to protect against packet
+forgery. All these choices have proven to be insufficient: key space is
+too small against current attacks, RC4 key scheduling is insufficient
+(beginning of the pseudorandom stream should be skipped), IV space is
+too small and IV reuse makes attacks easier, there is no replay
+protection, and non-keyed authentication does not protect against bit
+flipping packet data.
+
+WPA is an intermediate solution for the security issues. It uses
+Temporal Key Integrity Protocol (TKIP) to replace WEP. TKIP is a
+compromise on strong security and possibility to use existing
+hardware. It still uses RC4 for the encryption like WEP, but with
+per-packet RC4 keys. In addition, it implements replay protection,
+keyed packet authentication mechanism (Michael MIC).
+
+Keys can be managed using two different mechanisms. WPA can either use
+an external authentication server (e.g., RADIUS) and EAP just like
+IEEE 802.1X is using or pre-shared keys without need for additional
+servers. Wi-Fi calls these "WPA-Enterprise" and "WPA-Personal",
+respectively. Both mechanisms will generate a master session key for
+the Authenticator (AP) and Supplicant (client station).
+
+WPA implements a new key handshake (4-Way Handshake and Group Key
+Handshake) for generating and exchanging data encryption keys between
+the Authenticator and Supplicant. This handshake is also used to
+verify that both Authenticator and Supplicant know the master session
+key. These handshakes are identical regardless of the selected key
+management mechanism (only the method for generating master session
+key changes).
+
+
+
+IEEE 802.11i / WPA2
+-------------------
+
+The design for parts of IEEE 802.11i that were not included in WPA has
+finished (May 2004) and this amendment to IEEE 802.11 was approved in
+June 2004. Wi-Fi Alliance is using the final IEEE 802.11i as a new
+version of WPA called WPA2. This includes, e.g., support for more
+robust encryption algorithm (CCMP: AES in Counter mode with CBC-MAC)
+to replace TKIP and optimizations for handoff (reduced number of
+messages in initial key handshake, pre-authentication, and PMKSA caching).
+
+
+
+wpa_supplicant
+--------------
+
+wpa_supplicant is an implementation of the WPA Supplicant component,
+i.e., the part that runs in the client stations. It implements WPA key
+negotiation with a WPA Authenticator and EAP authentication with
+Authentication Server. In addition, it controls the roaming and IEEE
+802.11 authentication/association of the wlan driver.
+
+wpa_supplicant is designed to be a "daemon" program that runs in the
+background and acts as the backend component controlling the wireless
+connection. wpa_supplicant supports separate frontend programs and an
+example text-based frontend, wpa_cli, is included with wpa_supplicant.
+
+Following steps are used when associating with an AP using WPA:
+
+- wpa_supplicant requests the kernel driver to scan neighboring BSSes
+- wpa_supplicant selects a BSS based on its configuration
+- wpa_supplicant requests the kernel driver to associate with the chosen
+ BSS
+- If WPA-EAP: integrated IEEE 802.1X Supplicant completes EAP
+ authentication with the authentication server (proxied by the
+ Authenticator in the AP)
+- If WPA-EAP: master key is received from the IEEE 802.1X Supplicant
+- If WPA-PSK: wpa_supplicant uses PSK as the master session key
+- wpa_supplicant completes WPA 4-Way Handshake and Group Key Handshake
+ with the Authenticator (AP)
+- wpa_supplicant configures encryption keys for unicast and broadcast
+- normal data packets can be transmitted and received
+
+
+
+Building and installing
+-----------------------
+
+In order to be able to build wpa_supplicant, you will first need to
+select which parts of it will be included. This is done by creating a
+build time configuration file, .config, in the wpa_supplicant root
+directory. Configuration options are text lines using following
+format: CONFIG_<option>=y. Lines starting with # are considered
+comments and are ignored. See defconfig file for an example configuration
+and a list of available options and additional notes.
+
+The build time configuration can be used to select only the needed
+features and limit the binary size and requirements for external
+libraries. The main configuration parts are the selection of which
+driver interfaces (e.g., nl80211, wext, ..) and which authentication
+methods (e.g., EAP-TLS, EAP-PEAP, ..) are included.
+
+Following build time configuration options are used to control IEEE
+802.1X/EAPOL and EAP state machines and all EAP methods. Including
+TLS, PEAP, or TTLS will require linking wpa_supplicant with OpenSSL
+library for TLS implementation. Alternatively, GnuTLS or the internal
+TLSv1 implementation can be used for TLS functionality.
+
+CONFIG_IEEE8021X_EAPOL=y
+CONFIG_EAP_MD5=y
+CONFIG_EAP_MSCHAPV2=y
+CONFIG_EAP_TLS=y
+CONFIG_EAP_PEAP=y
+CONFIG_EAP_TTLS=y
+CONFIG_EAP_GTC=y
+CONFIG_EAP_OTP=y
+CONFIG_EAP_SIM=y
+CONFIG_EAP_AKA=y
+CONFIG_EAP_AKA_PRIME=y
+CONFIG_EAP_PSK=y
+CONFIG_EAP_SAKE=y
+CONFIG_EAP_GPSK=y
+CONFIG_EAP_PAX=y
+CONFIG_EAP_LEAP=y
+CONFIG_EAP_IKEV2=y
+CONFIG_EAP_PWD=y
+
+Following option can be used to include GSM SIM/USIM interface for GSM/UMTS
+authentication algorithm (for EAP-SIM/EAP-AKA/EAP-AKA'). This requires pcsc-lite
+(http://www.linuxnet.com/) for smart card access.
+
+CONFIG_PCSC=y
+
+Following options can be added to .config to select which driver
+interfaces are included.
+
+CONFIG_DRIVER_NL80211=y
+CONFIG_DRIVER_WEXT=y
+CONFIG_DRIVER_BSD=y
+CONFIG_DRIVER_NDIS=y
+
+Following example includes some more features and driver interfaces that
+are included in the wpa_supplicant package:
+
+CONFIG_DRIVER_NL80211=y
+CONFIG_DRIVER_WEXT=y
+CONFIG_DRIVER_BSD=y
+CONFIG_DRIVER_NDIS=y
+CONFIG_IEEE8021X_EAPOL=y
+CONFIG_EAP_MD5=y
+CONFIG_EAP_MSCHAPV2=y
+CONFIG_EAP_TLS=y
+CONFIG_EAP_PEAP=y
+CONFIG_EAP_TTLS=y
+CONFIG_EAP_GTC=y
+CONFIG_EAP_OTP=y
+CONFIG_EAP_SIM=y
+CONFIG_EAP_AKA=y
+CONFIG_EAP_PSK=y
+CONFIG_EAP_SAKE=y
+CONFIG_EAP_GPSK=y
+CONFIG_EAP_PAX=y
+CONFIG_EAP_LEAP=y
+CONFIG_EAP_IKEV2=y
+CONFIG_PCSC=y
+
+EAP-PEAP and EAP-TTLS will automatically include configured EAP
+methods (MD5, OTP, GTC, MSCHAPV2) for inner authentication selection.
+
+
+After you have created a configuration file, you can build
+wpa_supplicant and wpa_cli with 'make' command. You may then install
+the binaries to a suitable system directory, e.g., /usr/local/bin.
+
+Example commands:
+
+# build wpa_supplicant and wpa_cli
+make
+# install binaries (this may need root privileges)
+cp wpa_cli wpa_supplicant /usr/local/bin
+
+
+You will need to make a configuration file, e.g.,
+/etc/wpa_supplicant.conf, with network configuration for the networks
+you are going to use. Configuration file section below includes
+explanation of the configuration file format and includes various
+examples. Once the configuration is ready, you can test whether the
+configuration work by first running wpa_supplicant with following
+command to start it on foreground with debugging enabled:
+
+wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -d
+
+Assuming everything goes fine, you can start using following command
+to start wpa_supplicant on background without debugging:
+
+wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -B
+
+Please note that if you included more than one driver interface in the
+build time configuration (.config), you may need to specify which
+interface to use by including -D<driver name> option on the command
+line. See following section for more details on command line options
+for wpa_supplicant.
+
+
+
+Command line options
+--------------------
+
+usage:
+ wpa_supplicant [-BddfhKLqqtuvW] [-P<pid file>] [-g<global ctrl>] \
+ [-G<group>] \
+ -i<ifname> -c<config file> [-C<ctrl>] [-D<driver>] [-p<driver_param>] \
+ [-b<br_ifname> [-MN -i<ifname> -c<conf> [-C<ctrl>] [-D<driver>] \
+ [-p<driver_param>] [-b<br_ifname>] [-m<P2P Device config file>] ...
+
+options:
+ -b = optional bridge interface name
+ -B = run daemon in the background
+ -c = Configuration file
+ -C = ctrl_interface parameter (only used if -c is not)
+ -i = interface name
+ -d = increase debugging verbosity (-dd even more)
+ -D = driver name (can be multiple drivers: nl80211,wext)
+ -f = Log output to default log location (normally /tmp)
+ -g = global ctrl_interface
+ -G = global ctrl_interface group
+ -K = include keys (passwords, etc.) in debug output
+ -t = include timestamp in debug messages
+ -h = show this help text
+ -L = show license (BSD)
+ -p = driver parameters
+ -P = PID file
+ -q = decrease debugging verbosity (-qq even less)
+ -u = enable DBus control interface
+ -v = show version
+ -W = wait for a control interface monitor before starting
+ -M = start describing matching interface
+ -N = start describing new interface
+ -m = Configuration file for the P2P Device
+
+drivers:
+ nl80211 = Linux nl80211/cfg80211
+ wext = Linux wireless extensions (generic)
+ wired = wpa_supplicant wired Ethernet driver
+ roboswitch = wpa_supplicant Broadcom switch driver
+ bsd = BSD 802.11 support (Atheros, etc.)
+ ndis = Windows NDIS driver
+
+In most common cases, wpa_supplicant is started with
+
+wpa_supplicant -B -c/etc/wpa_supplicant.conf -iwlan0
+
+This makes the process fork into background.
+
+The easiest way to debug problems, and to get debug log for bug
+reports, is to start wpa_supplicant on foreground with debugging
+enabled:
+
+wpa_supplicant -c/etc/wpa_supplicant.conf -iwlan0 -d
+
+If the specific driver wrapper is not known beforehand, it is possible
+to specify multiple comma separated driver wrappers on the command
+line. wpa_supplicant will use the first driver wrapper that is able to
+initialize the interface.
+
+wpa_supplicant -Dnl80211,wext -c/etc/wpa_supplicant.conf -iwlan0
+
+
+wpa_supplicant can control multiple interfaces (radios) either by
+running one process for each interface separately or by running just
+one process and list of options at command line. Each interface is
+separated with -N argument. As an example, following command would
+start wpa_supplicant for two interfaces:
+
+wpa_supplicant \
+ -c wpa1.conf -i wlan0 -D nl80211 -N \
+ -c wpa2.conf -i wlan1 -D wext
+
+
+If the interfaces on which wpa_supplicant is to run are not known or do
+not exist, wpa_supplicant can match an interface when it arrives. Each
+matched interface is separated with -M argument and the -i argument now
+allows for pattern matching.
+
+As an example, the following command would start wpa_supplicant for a
+specific wired interface called lan0, any interface starting with wlan
+and lastly any other interface. Each match has its own configuration
+file, and for the wired interface a specific driver has also been given.
+
+wpa_supplicant \
+ -M -c wpa_wired.conf -ilan0 -D wired \
+ -M -c wpa1.conf -iwlan* \
+ -M -c wpa2.conf
+
+
+If the interface is added in a Linux bridge (e.g., br0), the bridge
+interface needs to be configured to wpa_supplicant in addition to the
+main interface:
+
+wpa_supplicant -cw.conf -Dnl80211 -iwlan0 -bbr0
+
+
+Configuration file
+------------------
+
+wpa_supplicant is configured using a text file that lists all accepted
+networks and security policies, including pre-shared keys. See
+example configuration file, wpa_supplicant.conf, for detailed
+information about the configuration format and supported fields.
+
+Changes to configuration file can be reloaded be sending SIGHUP signal
+to wpa_supplicant ('killall -HUP wpa_supplicant'). Similarly,
+reloading can be triggered with 'wpa_cli reconfigure' command.
+
+Configuration file can include one or more network blocks, e.g., one
+for each used SSID. wpa_supplicant will automatically select the best
+network based on the order of network blocks in the configuration
+file, network security level (WPA/WPA2 is preferred), and signal
+strength.
+
+Example configuration files for some common configurations:
+
+1) WPA-Personal (PSK) as home network and WPA-Enterprise with EAP-TLS as work
+ network
+
+# allow frontend (e.g., wpa_cli) to be used by all users in 'wheel' group
+ctrl_interface=/var/run/wpa_supplicant
+ctrl_interface_group=wheel
+#
+# home network; allow all valid ciphers
+network={
+ ssid="home"
+ scan_ssid=1
+ key_mgmt=WPA-PSK
+ psk="very secret passphrase"
+}
+#
+# work network; use EAP-TLS with WPA; allow only CCMP and TKIP ciphers
+network={
+ ssid="work"
+ scan_ssid=1
+ key_mgmt=WPA-EAP
+ pairwise=CCMP TKIP
+ group=CCMP TKIP
+ eap=TLS
+ identity="user@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+}
+
+
+2) WPA-RADIUS/EAP-PEAP/MSCHAPv2 with RADIUS servers that use old peaplabel
+ (e.g., Funk Odyssey and SBR, Meetinghouse Aegis, Interlink RAD-Series)
+
+ctrl_interface=/var/run/wpa_supplicant
+ctrl_interface_group=wheel
+network={
+ ssid="example"
+ scan_ssid=1
+ key_mgmt=WPA-EAP
+ eap=PEAP
+ identity="user@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ phase1="peaplabel=0"
+ phase2="auth=MSCHAPV2"
+}
+
+
+3) EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the
+ unencrypted use. Real identity is sent only within an encrypted TLS tunnel.
+
+ctrl_interface=/var/run/wpa_supplicant
+ctrl_interface_group=wheel
+network={
+ ssid="example"
+ scan_ssid=1
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ identity="user@example.com"
+ anonymous_identity="anonymous@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ phase2="auth=MD5"
+}
+
+
+4) IEEE 802.1X (i.e., no WPA) with dynamic WEP keys (require both unicast and
+ broadcast); use EAP-TLS for authentication
+
+ctrl_interface=/var/run/wpa_supplicant
+ctrl_interface_group=wheel
+network={
+ ssid="1x-test"
+ scan_ssid=1
+ key_mgmt=IEEE8021X
+ eap=TLS
+ identity="user@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+ eapol_flags=3
+}
+
+
+5) Catch all example that allows more or less all configuration modes. The
+ configuration options are used based on what security policy is used in the
+ selected SSID. This is mostly for testing and is not recommended for normal
+ use.
+
+ctrl_interface=/var/run/wpa_supplicant
+ctrl_interface_group=wheel
+network={
+ ssid="example"
+ scan_ssid=1
+ key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
+ pairwise=CCMP TKIP
+ group=CCMP TKIP WEP104 WEP40
+ psk="very secret passphrase"
+ eap=TTLS PEAP TLS
+ identity="user@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+ phase1="peaplabel=0"
+ ca_cert2="/etc/cert/ca2.pem"
+ client_cert2="/etc/cer/user.pem"
+ private_key2="/etc/cer/user.prv"
+ private_key2_passwd="password"
+}
+
+
+6) Authentication for wired Ethernet. This can be used with 'wired' or
+ 'roboswitch' interface (-Dwired or -Droboswitch on command line).
+
+ctrl_interface=/var/run/wpa_supplicant
+ctrl_interface_group=wheel
+ap_scan=0
+network={
+ key_mgmt=IEEE8021X
+ eap=MD5
+ identity="user"
+ password="password"
+ eapol_flags=0
+}
+
+
+
+Certificates
+------------
+
+Some EAP authentication methods require use of certificates. EAP-TLS
+uses both server side and client certificates whereas EAP-PEAP and
+EAP-TTLS only require the server side certificate. When client
+certificate is used, a matching private key file has to also be
+included in configuration. If the private key uses a passphrase, this
+has to be configured in wpa_supplicant.conf ("private_key_passwd").
+
+wpa_supplicant supports X.509 certificates in PEM and DER
+formats. User certificate and private key can be included in the same
+file.
+
+If the user certificate and private key is received in PKCS#12/PFX
+format, they need to be converted to suitable PEM/DER format for
+wpa_supplicant. This can be done, e.g., with following commands:
+
+# convert client certificate and private key to PEM format
+openssl pkcs12 -in example.pfx -out user.pem -clcerts
+# convert CA certificate (if included in PFX file) to PEM format
+openssl pkcs12 -in example.pfx -out ca.pem -cacerts -nokeys
+
+
+
+wpa_cli
+-------
+
+wpa_cli is a text-based frontend program for interacting with
+wpa_supplicant. It is used to query current status, change
+configuration, trigger events, and request interactive user input.
+
+wpa_cli can show the current authentication status, selected security
+mode, dot11 and dot1x MIBs, etc. In addition, it can configure some
+variables like EAPOL state machine parameters and trigger events like
+reassociation and IEEE 802.1X logoff/logon. wpa_cli provides a user
+interface to request authentication information, like username and
+password, if these are not included in the configuration. This can be
+used to implement, e.g., one-time-passwords or generic token card
+authentication where the authentication is based on a
+challenge-response that uses an external device for generating the
+response.
+
+The control interface of wpa_supplicant can be configured to allow
+non-root user access (ctrl_interface_group in the configuration
+file). This makes it possible to run wpa_cli with a normal user
+account.
+
+wpa_cli supports two modes: interactive and command line. Both modes
+share the same command set and the main difference is in interactive
+mode providing access to unsolicited messages (event messages,
+username/password requests).
+
+Interactive mode is started when wpa_cli is executed without including
+the command as a command line parameter. Commands are then entered on
+the wpa_cli prompt. In command line mode, the same commands are
+entered as command line arguments for wpa_cli.
+
+
+Interactive authentication parameters request
+
+When wpa_supplicant need authentication parameters, like username and
+password, which are not present in the configuration file, it sends a
+request message to all attached frontend programs, e.g., wpa_cli in
+interactive mode. wpa_cli shows these requests with
+"CTRL-REQ-<type>-<id>:<text>" prefix. <type> is IDENTITY, PASSWORD, or
+OTP (one-time-password). <id> is a unique identifier for the current
+network. <text> is description of the request. In case of OTP request,
+it includes the challenge from the authentication server.
+
+The reply to these requests can be given with 'identity', 'password',
+and 'otp' commands. <id> needs to be copied from the the matching
+request. 'password' and 'otp' commands can be used regardless of
+whether the request was for PASSWORD or OTP. The main difference
+between these two commands is that values given with 'password' are
+remembered as long as wpa_supplicant is running whereas values given
+with 'otp' are used only once and then forgotten, i.e., wpa_supplicant
+will ask frontend for a new value for every use. This can be used to
+implement one-time-password lists and generic token card -based
+authentication.
+
+Example request for password and a matching reply:
+
+CTRL-REQ-PASSWORD-1:Password needed for SSID foobar
+> password 1 mysecretpassword
+
+Example request for generic token card challenge-response:
+
+CTRL-REQ-OTP-2:Challenge 1235663 needed for SSID foobar
+> otp 2 9876
+
+
+wpa_cli commands
+
+ status = get current WPA/EAPOL/EAP status
+ mib = get MIB variables (dot1x, dot11)
+ help = show this usage help
+ interface [ifname] = show interfaces/select interface
+ level <debug level> = change debug level
+ license = show full wpa_cli license
+ logoff = IEEE 802.1X EAPOL state machine logoff
+ logon = IEEE 802.1X EAPOL state machine logon
+ set = set variables (shows list of variables when run without arguments)
+ pmksa = show PMKSA cache
+ reassociate = force reassociation
+ reconfigure = force wpa_supplicant to re-read its configuration file
+ preauthenticate <BSSID> = force preauthentication
+ identity <network id> <identity> = configure identity for an SSID
+ password <network id> <password> = configure password for an SSID
+ pin <network id> <pin> = configure pin for an SSID
+ otp <network id> <password> = configure one-time-password for an SSID
+ passphrase <network id> <passphrase> = configure private key passphrase
+ for an SSID
+ bssid <network id> <BSSID> = set preferred BSSID for an SSID
+ list_networks = list configured networks
+ select_network <network id> = select a network (disable others)
+ enable_network <network id> = enable a network
+ disable_network <network id> = disable a network
+ add_network = add a network
+ remove_network <network id> = remove a network
+ set_network <network id> <variable> <value> = set network variables (shows
+ list of variables when run without arguments)
+ get_network <network id> <variable> = get network variables
+ save_config = save the current configuration
+ disconnect = disconnect and wait for reassociate command before connecting
+ scan = request new BSS scan
+ scan_results = get latest scan results
+ get_capability <eap/pairwise/group/key_mgmt/proto/auth_alg> = get capabilities
+ terminate = terminate wpa_supplicant
+ quit = exit wpa_cli
+
+
+wpa_cli command line options
+
+wpa_cli [-p<path to ctrl sockets>] [-i<ifname>] [-hvB] [-a<action file>] \
+ [-P<pid file>] [-g<global ctrl>] [command..]
+ -h = help (show this usage text)
+ -v = shown version information
+ -a = run in daemon mode executing the action file based on events from
+ wpa_supplicant
+ -B = run a daemon in the background
+ default path: /var/run/wpa_supplicant
+ default interface: first interface found in socket path
+
+
+Using wpa_cli to run external program on connect/disconnect
+-----------------------------------------------------------
+
+wpa_cli can used to run external programs whenever wpa_supplicant
+connects or disconnects from a network. This can be used, e.g., to
+update network configuration and/or trigget DHCP client to update IP
+addresses, etc.
+
+One wpa_cli process in "action" mode needs to be started for each
+interface. For example, the following command starts wpa_cli for the
+default interface (-i can be used to select the interface in case of
+more than one interface being used at the same time):
+
+wpa_cli -a/sbin/wpa_action.sh -B
+
+The action file (-a option, /sbin/wpa_action.sh in this example) will
+be executed whenever wpa_supplicant completes authentication (connect
+event) or detects disconnection). The action script will be called
+with two command line arguments: interface name and event (CONNECTED
+or DISCONNECTED). If the action script needs to get more information
+about the current network, it can use 'wpa_cli status' to query
+wpa_supplicant for more information.
+
+Following example can be used as a simple template for an action
+script:
+
+#!/bin/sh
+
+IFNAME=$1
+CMD=$2
+
+if [ "$CMD" = "CONNECTED" ]; then
+ SSID=`wpa_cli -i$IFNAME status | grep ^ssid= | cut -f2- -d=`
+ # configure network, signal DHCP client, etc.
+fi
+
+if [ "$CMD" = "DISCONNECTED" ]; then
+ # remove network configuration, if needed
+ SSID=
+fi
+
+
+
+Integrating with pcmcia-cs/cardmgr scripts
+------------------------------------------
+
+wpa_supplicant needs to be running when using a wireless network with
+WPA. It can be started either from system startup scripts or from
+pcmcia-cs/cardmgr scripts (when using PC Cards). WPA handshake must be
+completed before data frames can be exchanged, so wpa_supplicant
+should be started before DHCP client.
+
+For example, following small changes to pcmcia-cs scripts can be used
+to enable WPA support:
+
+Add MODE="Managed" and WPA="y" to the network scheme in
+/etc/pcmcia/wireless.opts.
+
+Add the following block to the end of 'start' action handler in
+/etc/pcmcia/wireless:
+
+ if [ "$WPA" = "y" -a -x /usr/local/bin/wpa_supplicant ]; then
+ /usr/local/bin/wpa_supplicant -B -c/etc/wpa_supplicant.conf \
+ -i$DEVICE
+ fi
+
+Add the following block to the end of 'stop' action handler (may need
+to be separated from other actions) in /etc/pcmcia/wireless:
+
+ if [ "$WPA" = "y" -a -x /usr/local/bin/wpa_supplicant ]; then
+ killall wpa_supplicant
+ fi
+
+This will make cardmgr start wpa_supplicant when the card is plugged
+in.
+
+
+
+Dynamic interface add and operation without configuration files
+---------------------------------------------------------------
+
+wpa_supplicant can be started without any configuration files or
+network interfaces. When used in this way, a global (i.e., per
+wpa_supplicant process) control interface is used to add and remove
+network interfaces. Each network interface can then be configured
+through a per-network interface control interface. For example,
+following commands show how to start wpa_supplicant without any
+network interfaces and then add a network interface and configure a
+network (SSID):
+
+# Start wpa_supplicant in the background
+wpa_supplicant -g/var/run/wpa_supplicant-global -B
+
+# Add a new interface (wlan0, no configuration file, driver=nl80211, and
+# enable control interface)
+wpa_cli -g/var/run/wpa_supplicant-global interface_add wlan0 \
+ "" nl80211 /var/run/wpa_supplicant
+
+# Configure a network using the newly added network interface:
+wpa_cli -iwlan0 add_network
+wpa_cli -iwlan0 set_network 0 ssid '"test"'
+wpa_cli -iwlan0 set_network 0 key_mgmt WPA-PSK
+wpa_cli -iwlan0 set_network 0 psk '"12345678"'
+wpa_cli -iwlan0 set_network 0 pairwise TKIP
+wpa_cli -iwlan0 set_network 0 group TKIP
+wpa_cli -iwlan0 set_network 0 proto WPA
+wpa_cli -iwlan0 enable_network 0
+
+# At this point, the new network interface should start trying to associate
+# with the WPA-PSK network using SSID test.
+
+# Remove network interface
+wpa_cli -g/var/run/wpa_supplicant-global interface_remove wlan0
+
+
+Privilege separation
+--------------------
+
+To minimize the size of code that needs to be run with root privileges
+(e.g., to control wireless interface operation), wpa_supplicant
+supports optional privilege separation. If enabled, this separates the
+privileged operations into a separate process (wpa_priv) while leaving
+rest of the code (e.g., EAP authentication and WPA handshakes) into an
+unprivileged process (wpa_supplicant) that can be run as non-root
+user. Privilege separation restricts the effects of potential software
+errors by containing the majority of the code in an unprivileged
+process to avoid full system compromise.
+
+Privilege separation is not enabled by default and it can be enabled
+by adding CONFIG_PRIVSEP=y to the build configuration (.config). When
+enabled, the privileged operations (driver wrapper and l2_packet) are
+linked into a separate daemon program, wpa_priv. The unprivileged
+program, wpa_supplicant, will be built with a special driver/l2_packet
+wrappers that communicate with the privileged wpa_priv process to
+perform the needed operations. wpa_priv can control what privileged
+are allowed.
+
+wpa_priv needs to be run with network admin privileges (usually, root
+user). It opens a UNIX domain socket for each interface that is
+included on the command line; any other interface will be off limits
+for wpa_supplicant in this kind of configuration. After this,
+wpa_supplicant can be run as a non-root user (e.g., all standard users
+on a laptop or as a special non-privileged user account created just
+for this purpose to limit access to user files even further).
+
+
+Example configuration:
+- create user group for users that are allowed to use wpa_supplicant
+ ('wpapriv' in this example) and assign users that should be able to
+ use wpa_supplicant into that group
+- create /var/run/wpa_priv directory for UNIX domain sockets and control
+ user access by setting it accessible only for the wpapriv group:
+ mkdir /var/run/wpa_priv
+ chown root:wpapriv /var/run/wpa_priv
+ chmod 0750 /var/run/wpa_priv
+- start wpa_priv as root (e.g., from system startup scripts) with the
+ enabled interfaces configured on the command line:
+ wpa_priv -B -P /var/run/wpa_priv.pid nl80211:wlan0
+- run wpa_supplicant as non-root with a user that is in wpapriv group:
+ wpa_supplicant -i ath0 -c wpa_supplicant.conf
+
+wpa_priv does not use the network interface before wpa_supplicant is
+started, so it is fine to include network interfaces that are not
+available at the time wpa_priv is started. As an alternative, wpa_priv
+can be started when an interface is added (hotplug/udev/etc. scripts).
+wpa_priv can control multiple interface with one process, but it is
+also possible to run multiple wpa_priv processes at the same time, if
+desired.
+
+It should be noted that the interface used between wpa_supplicant and
+wpa_priv does not include all the capabilities of the wpa_supplicant
+driver interface and at times, this interface lacks update especially
+for recent addition. Consequently, use of wpa_priv does come with the
+price of somewhat reduced available functionality. The next section
+describing how wpa_supplicant can be used with reduced privileges
+without having to handle the complexity of separate wpa_priv. While that
+approve does not provide separation for network admin capabilities, it
+does allow other root privileges to be dropped without the drawbacks of
+the wpa_priv process.
+
+
+Linux capabilities instead of privileged process
+------------------------------------------------
+
+wpa_supplicant performs operations that need special permissions, e.g.,
+to control the network connection. Traditionally this has been achieved
+by running wpa_supplicant as a privileged process with effective user id
+0 (root). Linux capabilities can be used to provide restricted set of
+capabilities to match the functions needed by wpa_supplicant. The
+minimum set of capabilities needed for the operations is CAP_NET_ADMIN
+and CAP_NET_RAW.
+
+setcap(8) can be used to set file capabilities. For example:
+
+sudo setcap cap_net_raw,cap_net_admin+ep wpa_supplicant
+
+Please note that this would give anyone being able to run that
+wpa_supplicant binary access to the additional capabilities. This can
+further be limited by file owner/group and mode bits. For example:
+
+sudo chown wpas wpa_supplicant
+sudo chmod 0100 wpa_supplicant
+
+This combination of setcap, chown, and chmod commands would allow wpas
+user to execute wpa_supplicant with additional network admin/raw
+capabilities.
+
+Common way style of creating a control interface socket in
+/var/run/wpa_supplicant could not be done by this user, but this
+directory could be created before starting the wpa_supplicant and set to
+suitable mode to allow wpa_supplicant to create sockets
+there. Alternatively, other directory or abstract socket namespace could
+be used for the control interface.
+
+
+External requests for radio control
+-----------------------------------
+
+External programs can request wpa_supplicant to not start offchannel
+operations during other tasks that may need exclusive control of the
+radio. The RADIO_WORK control interface command can be used for this.
+
+"RADIO_WORK add <name> [freq=<MHz>] [timeout=<seconds>]" command can be
+used to reserve a slot for radio access. If freq is specified, other
+radio work items on the same channel may be completed in
+parallel. Otherwise, all other radio work items are blocked during
+execution. Timeout is set to 10 seconds by default to avoid blocking
+wpa_supplicant operations for excessive time. If a longer (or shorter)
+safety timeout is needed, that can be specified with the optional
+timeout parameter. This command returns an identifier for the radio work
+item.
+
+Once the radio work item has been started, "EXT-RADIO-WORK-START <id>"
+event message is indicated that the external processing can start. Once
+the operation has been completed, "RADIO_WORK done <id>" is used to
+indicate that to wpa_supplicant. This allows other radio works to be
+performed. If this command is forgotten (e.g., due to the external
+program terminating), wpa_supplicant will time out the radio work item
+and send "EXT-RADIO-WORK-TIMEOUT <id>" event to indicate that this has
+happened. "RADIO_WORK done <id>" can also be used to cancel items that
+have not yet been started.
+
+For example, in wpa_cli interactive mode:
+
+> radio_work add test
+1
+<3>EXT-RADIO-WORK-START 1
+> radio_work show
+ext:test@wlan0:0:1:2.487797
+> radio_work done 1
+OK
+> radio_work show
+
+
+> radio_work done 3
+OK
+> radio_work show
+ext:test freq=2412 timeout=30@wlan0:2412:1:28.583483
+<3>EXT-RADIO-WORK-TIMEOUT 2
+
+
+> radio_work add test2 freq=2412 timeout=60
+5
+<3>EXT-RADIO-WORK-START 5
+> radio_work add test3
+6
+> radio_work add test4
+7
+> radio_work show
+ext:test2 freq=2412 timeout=60@wlan0:2412:1:9.751844
+ext:test3@wlan0:0:0:5.071812
+ext:test4@wlan0:0:0:3.143870
+> radio_work done 6
+OK
+> radio_work show
+ext:test2 freq=2412 timeout=60@wlan0:2412:1:16.287869
+ext:test4@wlan0:0:0:9.679895
+> radio_work done 5
+OK
+<3>EXT-RADIO-WORK-START 7
+<3>EXT-RADIO-WORK-TIMEOUT 7
+
+
+DSCP policy procedures
+----------------------
+
+DSCP policy procedures defined in WFA QoS Management-R2 program
+facilitates AP devices to configure DSCP settings for specific uplink
+data streams.
+
+An AP may transmit a DSCP Policy Request frame containing zero or more
+QoS Management IEs to an associated STA which supports DSCP policy
+procedures. Each QoS Management element in a DSCP Policy Request frame
+represents one DSCP policy, and shall include one DSCP Policy attribute
+including a DSCP Policy ID, Request type, and a DSCP value.
+
+wpa_supplicant sends control interface event messages consisting details
+of DSCP policies requested by the AP through a DSCP Policy Request frame
+to external programs. The format of the control interface event messages
+is as shown below:
+
+- Control interface event message format to indicate DSCP request start
+
+ <3>CTRL-EVENT-DSCP-POLICY request_start [clear_all] [more]
+
+ clear_all - AP requested to clear all DSCP policies configured earlier
+ more - AP may request to configure more DSCP policies with new DSCP
+ request
+
+- Control interface event message format to add new policy
+
+ <3>CTRL-EVENT-DSCP-POLICY add <policy_id> <dscp_value> <ip_version=0|4|6>
+ [protocol] [source ip] [destination_ip]/[domain name] [source port]
+ [[<start_port> <end_port>]/destination port]
+
+ ip_version = 0: Both IPv4 and IPv6
+ = 4: IPv4
+ = 6: IPv6
+ protocol: Internet Protocol Numbers as per IETF RFCs
+ = 6: TCP
+ = 17: UDP
+ = 50: ESP
+
+- Control interface event message format to remove a particular policy,
+ identified by the policy_id attribute.
+
+ <3>CTRL-EVENT-DSCP-POLICY remove <policy_id>
+
+- DSCP policy may get rejected due to invalid policy parameters. Ccontrol
+ interface event message format for rejected policy.
+
+ <3>CTRL-EVENT-DSCP-POLICY reject <policy_id>
+
+- Control interface event message format to indicate end of DSCP request.
+
+ <3>CTRL-EVENT-DSCP-POLICY request_end
+
+- External applications shall clear active DSCP policies upon receiving
+ "CTRL-EVENT-DISCONNECTED" or "CTRL-EVENT-DSCP-POLICY clear_all" events.
+
+- Control interface event message format to indicate wpa_supplicant started
+ a timer to wait until the unsolicited DSCP request from the AP.
+
+ <3>CTRL-EVENT-DSCP-POLICY request_wait start
+
+- Control interface event message format to indicate timeout to receive the
+ unsolicited DSCP request. This event is expected only when an unsolicited
+ DSCP request is not received from the AP before timeout.
+
+ <3>CTRL-EVENT-DSCP-POLICY request_wait end
+
+DSCP Response:
+A QoS Management STA that enables DSCP Policy capability shall respond
+with DSCP response on receipt of a successful DSCP request from its
+associated AP. wpa_supplicant sends DSCP policy response based on the
+control interface command received from the user is as below:
+
+DSCP_RESP <[reset]>/<[solicited] [policy_id=1 status=0...]> [more]
+
+DSCP Query:
+DSCP Policy Query enables a STA to query its associated AP for DSCP
+policies applicable to the STA. Currently, this includes support to send
+a wildcard DSCP query or a DSCP query with a single domain name
+attribute. The command format for the DSCP query command is as follows:
+DSCP_QUERY <wildcard>/<domain_name=<string>>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/README-DPP b/ap/app/wpa_supplicant-2.10/wpa_supplicant/README-DPP
new file mode 100755
index 0000000..d378245
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/README-DPP
@@ -0,0 +1,204 @@
+Device Provisioning Protocol (DPP)
+==================================
+
+This document describes how the Device Provisioning Protocol (DPP)
+implementation in wpa_supplicant and hostapd can be configured and how
+the STA device and AP can be configured to connect each other using DPP
+Connector mechanism.
+
+Introduction to DPP
+-------------------
+
+Device Provisioning Protocol (also known as Wi-Fi Easy Connect) allows
+enrolling of interface-less devices in a secure Wi-Fi network using many
+methods like QR code based authentication (detailed below), PKEX based
+authentication (password with in-band provisioning), etc. In DPP a
+Configurator is used to provide network credentials to the devices. The
+three phases of DPP connection are authentication, configuration and
+network introduction.
+
+More information about Wi-Fi Easy Connect is available from this Wi-Fi
+Alliance web page:
+https://www.wi-fi.org/discover-wi-fi/wi-fi-easy-connect
+
+Build config setup
+------------------
+
+The following parameters must be included in the config file used to
+compile hostapd and wpa_supplicant.
+
+wpa_supplicant build config
+---------------------------
+
+Enable DPP in wpa_supplicant build config file
+
+CONFIG_DPP=y
+
+hostapd build config
+--------------------
+
+Enable DPP in hostapd build config file
+
+CONFIG_DPP=y
+
+Configurator build config
+-------------------------
+
+Any STA or AP device can act as a Configurator. Enable DPP in build
+config. For an AP to act as a Configurator, Interworking needs to be
+enabled for GAS. For wpa_supplicant it is not required.
+
+CONFIG_INTERWORKING=y
+
+
+Sample supplicant config file before provisioning
+-------------------------------------------------
+
+ctrl_interface=DIR=/var/run/wpa_supplicant
+ctrl_interface_group=0
+update_config=1
+pmf=2
+dpp_config_processing=2
+
+Sample hostapd config file before provisioning
+----------------------------------------------
+
+interface=wlan0
+driver=nl80211
+ctrl_interface=/var/run/hostapd
+ssid=test
+channel=1
+wpa=2
+wpa_key_mgmt=DPP
+ieee80211w=1
+wpa_pairwise=CCMP
+rsn_pairwise=CCMP
+
+
+Pre-requisites
+--------------
+
+It is assumed that an AP and client station are up by running hostapd
+and wpa_supplicant using respective config files.
+
+
+Creating Configurator
+---------------------
+
+Add a Configurator over the control interface (wpa_cli/hostapd_cli)
+
+> dpp_configurator_add
+(returns id)
+
+To get key of Configurator
+> dpp_configurator_get_key <id>
+
+
+How to configure an Enrollee using Configurator
+-----------------------------------------------
+
+On Enrollee side:
+
+Generate QR code for the device. Store the QR code id returned by the
+command.
+
+> dpp_bootstrap_gen type=qrcode mac=<mac-address-of-device> chan=<operating-class/channel> key=<key of the device>
+(Returns bootstrapping info id. If the key parameter is not included, a new key
+is generated automatically. The MAC address is specified without octet
+separating colons. The channel list includes the possible channels on which the
+device is waiting. This uses global operating classes; e.g., 81/1 is the 2.4
+GHz channel 1 on 2412 MHz.)
+
+Get URI for the QR Code of device using the bootstrap info id.
+> dpp_bootstrap_get_uri <bootstrap-id>
+
+Make device listen to DPP request. The central frequency of the 2.4 GHz
+band channel 1 is 2412 MHz) in case the Enrollee is a client device. An
+AP as an Enrollee is listening on its operating channel.
+
+> dpp_listen <frequency>
+
+On Configurator side:
+
+Enter the QR Code in the Configurator.
+> dpp_qr_code "<URI-from-QR-Code-read-from-enrollee>"
+
+On successfully adding QR Code, a bootstrapping info id is returned.
+
+Send provisioning request to Enrollee. (conf is ap-dpp if Enrollee is an
+AP. conf is sta-dpp if Enrollee is a client)
+> dpp_auth_init peer=<qr-code-id> conf=<ap-dpp|sta-dpp> ssid=<SSID hexdump> configurator=<configurator-id>
+or for legacy (PSK/SAE) provisioning for a station Enrollee:
+> dpp_auth_init peer=<qr-code-id> conf=sta-psk ssid=<SSID hexdump> pass=<passphrase hexdump>
+
+The DPP values will be printed in the console. Save these values into the
+config file. If the Enrollee is an AP, we need to manually write these
+values to the hostapd config file. If the Enrollee is a client device,
+these details can be automatically saved to config file using the
+following command.
+
+> save_config
+
+To set values in runtime for AP enrollees
+
+> set dpp_connector <Connector-value-printed-on-console>
+> set dpp_csign <csign-value-on-console>
+> set dpp_netaccesskey <netaccess-value-on-console>
+
+To set values in runtime for client enrollees, set dpp_config_processing
+to 2 in wpa_supplicant conf file.
+
+Once the values are set in run-time (if not set in run-time, but saved
+in config files, they are taken up in next restart), the client device
+will automatically connect to the already provisioned AP and connection
+will be established.
+
+
+Self-configuring a device
+-------------------------
+
+It is possible for a device to configure itself if it is the
+Configurator for the network.
+
+Create a Configurator in the device and use the dpp_configurator_sign
+command to get DPP credentials.
+
+> dpp_configurator_add
+(returns configurator id)
+> dpp_configurator_sign conf=<ap-dpp|sta-dpp> configurator=<configurator-id> ssid=<SSID hexdump>
+
+
+Sample AP configuration files after provisioning
+------------------------------------------------
+
+interface=wlan0
+driver=nl80211
+ctrl_interface=/var/run/hostapd
+ssid=test
+channel=1
+wpa=2
+wpa_key_mgmt=DPP
+ieee80211w=1
+wpa_pairwise=CCMP
+rsn_pairwise=CCMP
+dpp_connector=<Connector value provided by Configurator>
+dpp_csign=<C-Sign-Key value provided by Configurator>
+dpp_netaccesskey=<Net access key provided by Configurator>
+
+
+Sample station configuration file after provisioning
+----------------------------------------------------
+
+ctrl_interface=DIR=/var/run/wpa_supplicant
+ctrl_interface_group=0
+update_config=1
+pmf=2
+dpp_config_processing=2
+network={
+ ssid="test"
+ key_mgmt=DPP
+ ieee80211w=2
+ dpp_connector="<Connector value provided by Configurator>"
+ dpp_netaccesskey=<Net access key provided by Configurator>
+ dpp_csign=<C-sign-key value provided by Configurator>
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/README-HS20 b/ap/app/wpa_supplicant-2.10/wpa_supplicant/README-HS20
new file mode 100755
index 0000000..b076621
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/README-HS20
@@ -0,0 +1,654 @@
+wpa_supplicant and Hotspot 2.0
+==============================
+
+This document describe how the IEEE 802.11u Interworking and Wi-Fi
+Hotspot 2.0 (Release 1) implementation in wpa_supplicant can be
+configured and how an external component on the client e.g., management
+GUI or Wi-Fi framework) is used to manage this functionality.
+
+
+Introduction to Wi-Fi Hotspot 2.0
+---------------------------------
+
+Hotspot 2.0 is the name of the Wi-Fi Alliance specification that is used
+in the Wi-Fi CERTIFIED Passpoint<TM> program. More information about
+this is available in this white paper:
+
+http://www.wi-fi.org/knowledge-center/white-papers/wi-fi-certified-passpoint%E2%84%A2-new-program-wi-fi-alliance%C2%AE-enable-seamless
+
+The Hotspot 2.0 specification is also available from WFA:
+https://www.wi-fi.org/knowledge-center/published-specifications
+
+The core Interworking functionality (network selection, GAS/ANQP) were
+standardized in IEEE Std 802.11u-2011 which is now part of the IEEE Std
+802.11-2012.
+
+
+wpa_supplicant network selection
+--------------------------------
+
+Interworking support added option for configuring credentials that can
+work with multiple networks as an alternative to configuration of
+network blocks (e.g., per-SSID parameters). When requested to perform
+network selection, wpa_supplicant picks the highest priority enabled
+network block or credential. If a credential is picked (based on ANQP
+information from APs), a temporary network block is created
+automatically for the matching network. This temporary network block is
+used similarly to the network blocks that can be configured by the user,
+but it is not stored into the configuration file and is meant to be used
+only for temporary period of time since a new one can be created
+whenever needed based on ANQP information and the credential.
+
+By default, wpa_supplicant is not using automatic network selection
+unless requested explicitly with the interworking_select command. This
+can be changed with the auto_interworking=1 parameter to perform network
+selection automatically whenever trying to find a network for connection
+and none of the enabled network blocks match with the scan results. This
+case works similarly to "interworking_select auto", i.e., wpa_supplicant
+will internally determine which network or credential is going to be
+used based on configured priorities, scan results, and ANQP information.
+
+
+wpa_supplicant configuration
+----------------------------
+
+Interworking and Hotspot 2.0 functionality are optional components that
+need to be enabled in the wpa_supplicant build configuration
+(.config). This is done by adding following parameters into that file:
+
+CONFIG_INTERWORKING=y
+CONFIG_HS20=y
+
+It should be noted that this functionality requires a driver that
+supports GAS/ANQP operations. This uses the same design as P2P, i.e.,
+Action frame processing and building in user space within
+wpa_supplicant. The Linux nl80211 driver interface provides the needed
+functionality for this.
+
+
+There are number of run-time configuration parameters (e.g., in
+wpa_supplicant.conf when using the configuration file) that can be used
+to control Hotspot 2.0 operations.
+
+# Enable Interworking
+interworking=1
+
+# Enable Hotspot 2.0
+hs20=1
+
+# Parameters for controlling scanning
+
+# Homogeneous ESS identifier
+# If this is set, scans will be used to request response only from BSSes
+# belonging to the specified Homogeneous ESS. This is used only if interworking
+# is enabled.
+#hessid=00:11:22:33:44:55
+
+# Access Network Type
+# When Interworking is enabled, scans can be limited to APs that advertise the
+# specified Access Network Type (0..15; with 15 indicating wildcard match).
+# This value controls the Access Network Type value in Probe Request frames.
+#access_network_type=15
+
+# Automatic network selection behavior
+# 0 = do not automatically go through Interworking network selection
+# (i.e., require explicit interworking_select command for this; default)
+# 1 = perform Interworking network selection if one or more
+# credentials have been configured and scan did not find a
+# matching network block
+#auto_interworking=0
+
+
+Credentials can be pre-configured for automatic network selection:
+
+# credential block
+#
+# Each credential used for automatic network selection is configured as a set
+# of parameters that are compared to the information advertised by the APs when
+# interworking_select and interworking_connect commands are used.
+#
+# credential fields:
+#
+# temporary: Whether this credential is temporary and not to be saved
+#
+# priority: Priority group
+# By default, all networks and credentials get the same priority group
+# (0). This field can be used to give higher priority for credentials
+# (and similarly in struct wpa_ssid for network blocks) to change the
+# Interworking automatic networking selection behavior. The matching
+# network (based on either an enabled network block or a credential)
+# with the highest priority value will be selected.
+#
+# pcsc: Use PC/SC and SIM/USIM card
+#
+# realm: Home Realm for Interworking
+#
+# username: Username for Interworking network selection
+#
+# password: Password for Interworking network selection
+#
+# ca_cert: CA certificate for Interworking network selection
+#
+# client_cert: File path to client certificate file (PEM/DER)
+# This field is used with Interworking networking selection for a case
+# where client certificate/private key is used for authentication
+# (EAP-TLS). Full path to the file should be used since working
+# directory may change when wpa_supplicant is run in the background.
+#
+# Alternatively, a named configuration blob can be used by setting
+# this to blob://blob_name.
+#
+# private_key: File path to client private key file (PEM/DER/PFX)
+# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
+# commented out. Both the private key and certificate will be read
+# from the PKCS#12 file in this case. Full path to the file should be
+# used since working directory may change when wpa_supplicant is run
+# in the background.
+#
+# Windows certificate store can be used by leaving client_cert out and
+# configuring private_key in one of the following formats:
+#
+# cert://substring_to_match
+#
+# hash://certificate_thumbprint_in_hex
+#
+# For example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
+#
+# Note that when running wpa_supplicant as an application, the user
+# certificate store (My user account) is used, whereas computer store
+# (Computer account) is used when running wpasvc as a service.
+#
+# Alternatively, a named configuration blob can be used by setting
+# this to blob://blob_name.
+#
+# private_key_passwd: Password for private key file
+#
+# imsi: IMSI in <MCC> | <MNC> | '-' | <MSIN> format
+#
+# milenage: Milenage parameters for SIM/USIM simulator in <Ki>:<OPc>:<SQN>
+# format
+#
+# domain_suffix_match: Constraint for server domain name
+# If set, this FQDN is used as a suffix match requirement for the AAA
+# server certificate in SubjectAltName dNSName element(s). If a
+# matching dNSName is found, this constraint is met. If no dNSName
+# values are present, this constraint is matched against SubjectName CN
+# using same suffix match comparison. Suffix match here means that the
+# host/domain name is compared one label at a time starting from the
+# top-level domain and all the labels in @domain_suffix_match shall be
+# included in the certificate. The certificate may include additional
+# sub-level labels in addition to the required labels.
+#
+# For example, domain_suffix_match=example.com would match
+# test.example.com but would not match test-example.com.
+#
+# domain: Home service provider FQDN(s)
+# This is used to compare against the Domain Name List to figure out
+# whether the AP is operated by the Home SP. Multiple domain entries can
+# be used to configure alternative FQDNs that will be considered home
+# networks.
+#
+# roaming_consortium: Roaming Consortium OI
+# If roaming_consortium_len is non-zero, this field contains the
+# Roaming Consortium OI that can be used to determine which access
+# points support authentication with this credential. This is an
+# alternative to the use of the realm parameter. When using Roaming
+# Consortium to match the network, the EAP parameters need to be
+# pre-configured with the credential since the NAI Realm information
+# may not be available or fetched.
+#
+# required_roaming_consortium: Required Roaming Consortium OI
+# If required_roaming_consortium_len is non-zero, this field contains the
+# Roaming Consortium OI that is required to be advertised by the AP for
+# the credential to be considered matching.
+#
+# roaming_consortiums: Roaming Consortium OI(s) memberships
+# This string field contains one or more comma delimited OIs (hexdump)
+# identifying the roaming consortiums of which the provider is a member.
+# The list is sorted from the most preferred one to the least preferred
+# one. A match between the Roaming Consortium OIs advertised by an AP and
+# the OIs in this list indicates that successful authentication is
+# possible.
+# (Hotspot 2.0 PerProviderSubscription/<X+>/HomeSP/RoamingConsortiumOI)
+#
+# eap: Pre-configured EAP method
+# This optional field can be used to specify which EAP method will be
+# used with this credential. If not set, the EAP method is selected
+# automatically based on ANQP information (e.g., NAI Realm).
+#
+# phase1: Pre-configure Phase 1 (outer authentication) parameters
+# This optional field is used with like the 'eap' parameter.
+#
+# phase2: Pre-configure Phase 2 (inner authentication) parameters
+# This optional field is used with like the 'eap' parameter.
+#
+# excluded_ssid: Excluded SSID
+# This optional field can be used to excluded specific SSID(s) from
+# matching with the network. Multiple entries can be used to specify more
+# than one SSID.
+#
+# roaming_partner: Roaming partner information
+# This optional field can be used to configure preferences between roaming
+# partners. The field is a string in following format:
+# <FQDN>,<0/1 exact match>,<priority>,<* or country code>
+# (non-exact match means any subdomain matches the entry; priority is in
+# 0..255 range with 0 being the highest priority)
+#
+# update_identifier: PPS MO ID
+# (Hotspot 2.0 PerProviderSubscription/UpdateIdentifier)
+#
+# provisioning_sp: FQDN of the SP that provisioned the credential
+# This optional field can be used to keep track of the SP that provisioned
+# the credential to find the PPS MO (./Wi-Fi/<provisioning_sp>).
+#
+# sp_priority: Credential priority within a provisioning SP
+# This is the priority of the credential among all credentials
+# provisioned by the same SP (i.e., for entries that have identical
+# provisioning_sp value). The range of this priority is 0-255 with 0
+# being the highest and 255 the lower priority.
+#
+# Minimum backhaul threshold (PPS/<X+>/Policy/MinBackhauldThreshold/*)
+# These fields can be used to specify minimum download/upload backhaul
+# bandwidth that is preferred for the credential. This constraint is
+# ignored if the AP does not advertise WAN Metrics information or if the
+# limit would prevent any connection. Values are in kilobits per second.
+# min_dl_bandwidth_home
+# min_ul_bandwidth_home
+# min_dl_bandwidth_roaming
+# min_ul_bandwidth_roaming
+#
+# max_bss_load: Maximum BSS Load Channel Utilization (1..255)
+# (PPS/<X+>/Policy/MaximumBSSLoadValue)
+# This value is used as the maximum channel utilization for network
+# selection purposes for home networks. If the AP does not advertise
+# BSS Load or if the limit would prevent any connection, this constraint
+# will be ignored.
+#
+# req_conn_capab: Required connection capability
+# (PPS/<X+>/Policy/RequiredProtoPortTuple)
+# This value is used to configure set of required protocol/port pairs that
+# a roaming network shall support (include explicitly in Connection
+# Capability ANQP element). This constraint is ignored if the AP does not
+# advertise Connection Capability or if this constraint would prevent any
+# network connection. This policy is not used in home networks.
+# Format: <protocol>[:<comma-separated list of ports]
+# Multiple entries can be used to list multiple requirements.
+# For example, number of common TCP protocols:
+# req_conn_capab=6:22,80,443
+# For example, IPSec/IKE:
+# req_conn_capab=17:500
+# req_conn_capab=50
+#
+# ocsp: Whether to use/require OCSP to check server certificate
+# 0 = do not use OCSP stapling (TLS certificate status extension)
+# 1 = try to use OCSP stapling, but not require response
+# 2 = require valid OCSP stapling response
+#
+# sim_num: Identifier for which SIM to use in multi-SIM devices
+#
+# engine: Whether to use an engine for private key operations (0/1)
+# engine_id: String identifying the engine to use
+# ca_cert_id: The CA certificate identifier when using an engine
+# cert_id: The certificate identifier when using an engine
+# key_id: The private key identifier when using an engine
+#
+# for example:
+#
+#cred={
+# realm="example.com"
+# username="user@example.com"
+# password="password"
+# ca_cert="/etc/wpa_supplicant/ca.pem"
+# domain="example.com"
+# domain_suffix_match="example.com"
+#}
+#
+#cred={
+# imsi="310026-000000000"
+# milenage="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82"
+#}
+#
+#cred={
+# realm="example.com"
+# username="user"
+# password="password"
+# ca_cert="/etc/wpa_supplicant/ca.pem"
+# domain="example.com"
+# roaming_consortium=223344
+# roaming_consortiums="112233,4455667788,aabbcc"
+# eap=TTLS
+# phase2="auth=MSCHAPV2"
+#}
+
+
+Control interface
+-----------------
+
+wpa_supplicant provides a control interface that can be used from
+external programs to manage various operations. The included command
+line tool, wpa_cli, can be used for manual testing with this interface.
+
+Following wpa_cli interactive mode commands show some examples of manual
+operations related to Hotspot 2.0:
+
+Remove configured networks and credentials:
+
+> remove_network all
+OK
+> remove_cred all
+OK
+
+
+Add a username/password credential:
+
+> add_cred
+0
+> set_cred 0 realm "mail.example.com"
+OK
+> set_cred 0 username "username"
+OK
+> set_cred 0 password "password"
+OK
+> set_cred 0 priority 1
+OK
+> set_cred 0 temporary 1
+OK
+
+Add a SIM credential using a simulated SIM/USIM card for testing:
+
+> add_cred
+1
+> set_cred 1 imsi "23456-0000000000"
+OK
+> set_cred 1 milenage "90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581:000000000123"
+OK
+> set_cred 1 priority 1
+OK
+
+Note: the return value of add_cred is used as the first argument to
+the following set_cred commands.
+
+Add a SIM credential using a external SIM/USIM processing:
+
+> set external_sim 1
+OK
+> add_cred
+1
+> set_cred 1 imsi "23456-0000000000"
+OK
+> set_cred 1 eap SIM
+OK
+
+
+Add a WPA2-Enterprise network:
+
+> add_network
+0
+> set_network 0 key_mgmt WPA-EAP
+OK
+> set_network 0 ssid "enterprise"
+OK
+> set_network 0 eap TTLS
+OK
+> set_network 0 anonymous_identity "anonymous"
+OK
+> set_network 0 identity "user"
+OK
+> set_network 0 password "password"
+OK
+> set_network 0 priority 0
+OK
+> enable_network 0 no-connect
+OK
+
+
+Add an open network:
+
+> add_network
+3
+> set_network 3 key_mgmt NONE
+OK
+> set_network 3 ssid "coffee-shop"
+OK
+> select_network 3
+OK
+
+Note: the return value of add_network is used as the first argument to
+the following set_network commands.
+
+The preferred credentials/networks can be indicated with the priority
+parameter (1 is higher priority than 0).
+
+
+Interworking network selection can be started with interworking_select
+command. This instructs wpa_supplicant to run a network scan and iterate
+through the discovered APs to request ANQP information from the APs that
+advertise support for Interworking/Hotspot 2.0:
+
+> interworking_select
+OK
+<3>Starting ANQP fetch for 02:00:00:00:01:00
+<3>RX-ANQP 02:00:00:00:01:00 ANQP Capability list
+<3>RX-ANQP 02:00:00:00:01:00 Roaming Consortium list
+<3>RX-HS20-ANQP 02:00:00:00:01:00 HS Capability List
+<3>ANQP fetch completed
+<3>INTERWORKING-AP 02:00:00:00:01:00 type=unknown
+
+
+INTERWORKING-AP event messages indicate the APs that support network
+selection and for which there is a matching
+credential. interworking_connect command can be used to select a network
+to connect with:
+
+
+> interworking_connect 02:00:00:00:01:00
+OK
+<3>CTRL-EVENT-SCAN-RESULTS
+<3>SME: Trying to authenticate with 02:00:00:00:01:00 (SSID='Example Network' freq=2412 MHz)
+<3>Trying to associate with 02:00:00:00:01:00 (SSID='Example Network' freq=2412 MHz)
+<3>Associated with 02:00:00:00:01:00
+<3>CTRL-EVENT-EAP-STARTED EAP authentication started
+<3>CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21
+<3>CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected
+<3>CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
+<3>WPA: Key negotiation completed with 02:00:00:00:01:00 [PTK=CCMP GTK=CCMP]
+<3>CTRL-EVENT-CONNECTED - Connection to 02:00:00:00:01:00 completed (auth) [id=0 id_str=]
+
+
+wpa_supplicant creates a temporary network block for the selected
+network based on the configured credential and ANQP information from the
+AP:
+
+> list_networks
+network id / ssid / bssid / flags
+0 Example Network any [CURRENT]
+> get_network 0 key_mgmt
+WPA-EAP
+> get_network 0 eap
+TTLS
+
+
+Alternatively to using an external program to select the network,
+"interworking_select auto" command can be used to request wpa_supplicant
+to select which network to use based on configured priorities:
+
+
+> remove_network all
+OK
+<3>CTRL-EVENT-DISCONNECTED bssid=02:00:00:00:01:00 reason=1 locally_generated=1
+> interworking_select auto
+OK
+<3>Starting ANQP fetch for 02:00:00:00:01:00
+<3>RX-ANQP 02:00:00:00:01:00 ANQP Capability list
+<3>RX-ANQP 02:00:00:00:01:00 Roaming Consortium list
+<3>RX-HS20-ANQP 02:00:00:00:01:00 HS Capability List
+<3>ANQP fetch completed
+<3>INTERWORKING-AP 02:00:00:00:01:00 type=unknown
+<3>CTRL-EVENT-SCAN-RESULTS
+<3>SME: Trying to authenticate with 02:00:00:00:01:00 (SSID='Example Network' freq=2412 MHz)
+<3>Trying to associate with 02:00:00:00:01:00 (SSID='Example Network' freq=2412 MHz)
+<3>Associated with 02:00:00:00:01:00
+<3>CTRL-EVENT-EAP-STARTED EAP authentication started
+<3>CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21
+<3>CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected
+<3>CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
+<3>WPA: Key negotiation completed with 02:00:00:00:01:00 [PTK=CCMP GTK=CCMP]
+<3>CTRL-EVENT-CONNECTED - Connection to 02:00:00:00:01:00 completed (reauth) [id=0 id_str=]
+
+
+The connection status can be shown with the status command:
+
+> status
+bssid=02:00:00:00:01:00
+ssid=Example Network
+id=0
+mode=station
+pairwise_cipher=CCMP <--- link layer security indication
+group_cipher=CCMP
+key_mgmt=WPA2/IEEE 802.1X/EAP
+wpa_state=COMPLETED
+p2p_device_address=02:00:00:00:00:00
+address=02:00:00:00:00:00
+hs20=1 <--- HS 2.0 indication
+Supplicant PAE state=AUTHENTICATED
+suppPortStatus=Authorized
+EAP state=SUCCESS
+selectedMethod=21 (EAP-TTLS)
+EAP TLS cipher=AES-128-SHA
+EAP-TTLSv0 Phase2 method=PAP
+
+
+> status
+bssid=02:00:00:00:02:00
+ssid=coffee-shop
+id=3
+mode=station
+pairwise_cipher=NONE
+group_cipher=NONE
+key_mgmt=NONE
+wpa_state=COMPLETED
+p2p_device_address=02:00:00:00:00:00
+address=02:00:00:00:00:00
+
+
+Note: The Hotspot 2.0 indication is shown as "hs20=1" in the status
+command output. Link layer security is indicated with the
+pairwise_cipher (CCMP = secure, NONE = no encryption used).
+
+
+Also the scan results include the Hotspot 2.0 indication:
+
+> scan_results
+bssid / frequency / signal level / flags / ssid
+02:00:00:00:01:00 2412 -30 [WPA2-EAP-CCMP][ESS][HS20] Example Network
+
+
+ANQP information for the BSS can be fetched using the BSS command:
+
+> bss 02:00:00:00:01:00
+id=1
+bssid=02:00:00:00:01:00
+freq=2412
+beacon_int=100
+capabilities=0x0411
+qual=0
+noise=-92
+level=-30
+tsf=1345573286517276
+age=105
+ie=000f4578616d706c65204e6574776f726b010882848b960c1218240301012a010432043048606c30140100000fac040100000fac040100000fac0100007f04000000806b091e07010203040506076c027f006f1001531122331020304050010203040506dd05506f9a1000
+flags=[WPA2-EAP-CCMP][ESS][HS20]
+ssid=Example Network
+anqp_roaming_consortium=031122330510203040500601020304050603fedcba
+
+
+ANQP queries can also be requested with the anqp_get and hs20_anqp_get
+commands:
+
+> anqp_get 02:00:00:00:01:00 261
+OK
+<3>RX-ANQP 02:00:00:00:01:00 Roaming Consortium list
+> hs20_anqp_get 02:00:00:00:01:00 2
+OK
+<3>RX-HS20-ANQP 02:00:00:00:01:00 HS Capability List
+
+In addition, fetch_anqp command can be used to request similar set of
+ANQP queries to be done as is run as part of interworking_select:
+
+> scan
+OK
+<3>CTRL-EVENT-SCAN-RESULTS
+> fetch_anqp
+OK
+<3>Starting ANQP fetch for 02:00:00:00:01:00
+<3>RX-ANQP 02:00:00:00:01:00 ANQP Capability list
+<3>RX-ANQP 02:00:00:00:01:00 Roaming Consortium list
+<3>RX-HS20-ANQP 02:00:00:00:01:00 HS Capability List
+<3>ANQP fetch completed
+
+
+Hotspot 2.0 Rel 2 online signup and OSEN
+----------------------------------------
+
+Following parameters can be used to create a network profile for
+link-layer protected Hotspot 2.0 online signup connection with
+OSEN. Note that ssid and identify (NAI) values need to be set based on
+the information for the selected provider in the OSU Providers list
+ANQP-element.
+
+network={
+ ssid="HS 2.0 OSU"
+ proto=OSEN
+ key_mgmt=OSEN
+ pairwise=CCMP
+ group=GTK_NOT_USED
+ eap=WFA-UNAUTH-TLS
+ identity="anonymous@example.com"
+ ca_cert="osu-ca.pem"
+ ocsp=2
+}
+
+
+Hotspot 2.0 connection with external network selection
+------------------------------------------------------
+
+When a component controlling wpa_supplicant takes care of Interworking
+network selection, following configuration and network profile
+parameters can be used to configure a temporary network profile for a
+Hotspot 2.0 connection (e.g., with SET, ADD_NETWORK, SET_NETWORK, and
+SELECT_NETWORK control interface commands):
+
+interworking=1
+hs20=1
+auto_interworking=0
+
+network={
+ ssid="test-hs20"
+ proto=RSN
+ key_mgmt=WPA-EAP
+ pairwise=CCMP
+ anonymous_identity="anonymous@example.com"
+ identity="hs20-test@example.com"
+ password="password"
+ ca_cert="ca.pem"
+ eap=TTLS
+ phase2="auth=MSCHAPV2"
+ update_identifier=54321
+ roaming_consortium_selection=112233
+ #ocsp=2
+}
+
+
+These parameters are set based on the PPS MO credential and/or NAI Realm
+list ANQP-element:
+
+anonymous_identity: Credential/UsernamePassword/Username with username part
+ replaced with "anonymous"
+identity: Credential/UsernamePassword/Username
+password: Credential/UsernamePassword/Password
+update_identifier: PPS/UpdateIdentifier
+ca_cert: from the downloaded trust root based on PPS information
+eap: Credential/UsernamePassword/EAPMethod or NAI Realm list
+phase2: Credential/UsernamePassword/EAPMethod or NAI Realm list
+roaming_consortium_selection: Matching OI from HomeSP/RoamingConsortiumOI
+ocsp: Credential/CheckAAAServerCertStatus
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/README-P2P b/ap/app/wpa_supplicant-2.10/wpa_supplicant/README-P2P
new file mode 100755
index 0000000..55a60a2
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/README-P2P
@@ -0,0 +1,856 @@
+wpa_supplicant and Wi-Fi P2P
+============================
+
+This document describes how the Wi-Fi P2P implementation in
+wpa_supplicant can be configured and how an external component on the
+client (e.g., management GUI) is used to enable WPS enrollment and
+registrar registration.
+
+
+Introduction to Wi-Fi P2P
+-------------------------
+
+TODO
+
+More information about Wi-Fi P2P is available from Wi-Fi Alliance:
+http://www.wi-fi.org/Wi-Fi_Direct.php
+
+
+wpa_supplicant implementation
+-----------------------------
+
+TODO
+
+
+wpa_supplicant configuration
+----------------------------
+
+Wi-Fi P2P is an optional component that needs to be enabled in the
+wpa_supplicant build configuration (.config). Here is an example
+configuration that includes Wi-Fi P2P support and Linux nl80211
+-based driver interface:
+
+CONFIG_DRIVER_NL80211=y
+CONFIG_CTRL_IFACE=y
+CONFIG_P2P=y
+CONFIG_AP=y
+CONFIG_WPS=y
+
+
+In run-time configuration file (wpa_supplicant.conf), some parameters
+for P2P may be set. In order to make the devices easier to recognize,
+device_name and device_type should be specified. For example,
+something like this should be included:
+
+ctrl_interface=/var/run/wpa_supplicant
+device_name=My P2P Device
+device_type=1-0050F204-1
+
+
+wpa_cli
+-------
+
+Actual Wi-Fi P2P operations are requested during runtime. These can be
+done for example using wpa_cli (which is described below) or a GUI
+like wpa_gui-qt4.
+
+
+wpa_cli starts in interactive mode if no command string is included on
+the command line. By default, it will select the first network interface
+that it can find (and that wpa_supplicant controls). If more than one
+interface is in use, it may be necessary to select one of the explicitly
+by adding -i argument on the command line (e.g., 'wpa_cli -i wlan1').
+
+Most of the P2P operations are done on the main interface (e.g., the
+interface that is automatically added when the driver is loaded, e.g.,
+wlan0). When using a separate virtual interface for group operations
+(e.g., wlan1), the control interface for that group interface may need
+to be used for some operations (mainly WPS activation in GO). This may
+change in the future so that all the needed operations could be done
+over the main control interface.
+
+Device Discovery
+
+p2p_find [timeout in seconds] [type=<social|progressive>] \
+ [dev_id=<addr>] [dev_type=<device type>] \
+ [delay=<search delay in ms>] [seek=<service name>] [freq=<MHz>]
+
+The default behavior is to run a single full scan in the beginning and
+then scan only social channels. type=social will scan only social
+channels, i.e., it skips the initial full scan. type=progressive is
+like the default behavior, but it will scan through all the channels
+progressively one channel at the time in the Search state rounds. This
+will help in finding new groups or groups missed during the initial
+full scan. When the type parameter is not included (i.e., full scan), the
+optional freq parameter can be used to override the first scan to use only
+the specified channel after which only social channels are scanned.
+
+The optional dev_id option can be used to specify a single P2P peer to
+search for. The optional delay parameter can be used to request an extra
+delay to be used between search iterations (e.g., to free up radio
+resources for concurrent operations).
+
+The optional dev_type option can be used to specify a single device type
+(primary or secondary) to search for, e.g.,
+"p2p_find dev_type=1-0050F204-1".
+
+
+With one or more seek arguments, the command sends Probe Request frames
+for a P2PS service. For example,
+p2p_find 5 dev_id=11:22:33:44:55:66 seek=alt.example.chat seek=alt.example.video
+
+Parameters description:
+ Timeout - Optional ASCII base-10-encoded u16. If missing, request will not
+ time out and must be canceled manually
+ dev_id - Optional to request responses from a single known remote device
+ Service Name - Mandatory UTF-8 string for ASP seeks
+ Service name must match the remote service being advertised exactly
+ (no prefix matching).
+ Service name may be empty, in which case all ASP services will be
+ returned, and may be filtered with p2p_serv_disc_req settings, and
+ p2p_serv_asp_resp results.
+ Multiple service names may be requested, but if it exceeds internal
+ limit, it will automatically revert to requesting all ASP services.
+
+p2p_listen [timeout in seconds]
+
+Start Listen-only state (become discoverable without searching for
+other devices). Optional parameter can be used to specify the duration
+for the Listen operation in seconds. This command may not be of that
+much use during normal operations and is mainly designed for
+testing. It can also be used to keep the device discoverable without
+having to maintain a group.
+
+p2p_stop_find
+
+Stop ongoing P2P device discovery or other operation (connect, listen
+mode).
+
+p2p_flush
+
+Flush P2P peer table and state.
+
+Group Formation
+
+p2p_prov_disc <peer device address> <display|keypad|pbc> [join|auto]
+
+Send P2P provision discovery request to the specified peer. The
+parameters for this command are the P2P device address of the peer and
+the desired configuration method. For example, "p2p_prov_disc
+02:01:02:03:04:05 display" would request the peer to display a PIN for
+us and "p2p_prov_disc 02:01:02:03:04:05 keypad" would request the peer
+to enter a PIN that we display.
+
+The optional "join" parameter can be used to indicate that this command
+is requesting an already running GO to prepare for a new client. This is
+mainly used with "display" to request it to display a PIN. The "auto"
+parameter can be used to request wpa_supplicant to automatically figure
+out whether the peer device is operating as a GO and if so, use
+join-a-group style PD instead of GO Negotiation style PD.
+
+p2p_connect <peer device address> <pbc|pin|PIN#|p2ps> [display|keypad|p2ps]
+ [persistent|persistent=<network id>] [join|auth]
+ [go_intent=<0..15>] [freq=<in MHz>] [ht40] [vht] [he] [provdisc] [auto]
+ [ssid=<hexdump>]
+
+Start P2P group formation with a discovered P2P peer. This includes
+optional group owner negotiation, group interface setup, provisioning,
+and establishing data connection.
+
+The <pbc|pin|PIN#> parameter specifies the WPS provisioning
+method. "pbc" string starts pushbutton method, "pin" string start PIN
+method using an automatically generated PIN (which will be returned as
+the command return code), PIN# means that a pre-selected PIN can be
+used (e.g., 12345670). [display|keypad] is used with PIN method
+to specify which PIN is used (display=dynamically generated random PIN
+from local display, keypad=PIN entered from peer display). "persistent"
+parameter can be used to request a persistent group to be formed. The
+"persistent=<network id>" alternative can be used to pre-populate
+SSID/passphrase configuration based on a previously used persistent
+group where this device was the GO. The previously used parameters will
+then be used if the local end becomes the GO in GO Negotiation (which
+can be forced with go_intent=15).
+
+"join" indicates that this is a command to join an existing group as a
+client. It skips the GO Negotiation part. This will send a Provision
+Discovery Request message to the target GO before associating for WPS
+provisioning.
+
+"auth" indicates that the WPS parameters are authorized for the peer
+device without actually starting GO Negotiation (i.e., the peer is
+expected to initiate GO Negotiation). This is mainly for testing
+purposes.
+
+"go_intent" can be used to override the default GO Intent for this GO
+Negotiation.
+
+"freq" can be used to set a forced operating channel (e.g., freq=2412
+to select 2.4 GHz channel 1).
+
+"provdisc" can be used to request a Provision Discovery exchange to be
+used prior to starting GO Negotiation as a workaround with some deployed
+P2P implementations that require this to allow the user to accept the
+connection.
+
+"auto" can be used to request wpa_supplicant to automatically figure
+out whether the peer device is operating as a GO and if so, use
+join-a-group operation rather than GO Negotiation.
+
+"ssid=<hexdump>" can be used to specify the Group SSID for join
+operations. This allows the P2P Client interface to filter scan results
+based on SSID to avoid selecting an incorrect BSS entry in case the same
+P2P Device or Interface address have been used in multiple groups
+recently.
+
+P2PS attribute changes to p2p_connect command:
+
+P2PS supports two WPS provisioning methods namely PIN method and P2PS default.
+The remaining parameters hold same role as in legacy P2P. In case of P2PS
+default config method "p2ps" keyword is added in p2p_connect command.
+
+For example:
+p2p_connect 02:0a:f5:85:11:00 12345670 p2ps persistent join
+ (WPS Method = P2PS default)
+
+p2p_connect 02:0a:f5:85:11:00 45629034 keypad persistent
+ (WPS Method = PIN)
+
+p2p_asp_provision <peer MAC address> <adv_id=peer adv id>
+ <adv_mac=peer MAC address> [role=2|4|1] <session=session id>
+ <session_mac=initiator mac address>
+ [info='service info'] <method=Default|keypad|Display>
+
+This command starts provision discovery with the P2PS enabled peer device.
+
+For example,
+p2p_asp_provision 00:11:22:33:44:55 adv_id=4d6fc7 adv_mac=00:55:44:33:22:11 role=1 session=12ab34 session_mac=00:11:22:33:44:55 info='name=john' method=1000
+
+Parameter description:
+ MAC address - Mandatory
+ adv_id - Mandatory remote Advertising ID of service connection is being
+ established for
+ adv_mac - Mandatory MAC address that owns/registered the service
+ role - Optional
+ 2 (group client only) or 4 (group owner only)
+ if not present (or 1) role is negotiated by the two peers.
+ session - Mandatory Session ID of the first session to be established
+ session_mac - Mandatory MAC address that owns/initiated the session
+ method - Optional method to request for provisioning (1000 - P2PS Default,
+ 100 - Keypad(PIN), 8 - Display(PIN))
+ info - Optional UTF-8 string. Hint for service to indicate possible usage
+ parameters - Escape single quote & backslash:
+ with a backslash 0x27 == ' == \', and 0x5c == \ == \\
+
+p2p_asp_provision_resp <peer mac address> <adv_id= local adv id>
+ <adv_mac=local MAC address> <role=1|2|4> <status=0>
+ <session=session id> <session_mac=peer MAC address>
+
+This command sends a provision discovery response from responder side.
+
+For example,
+p2p_asp_provision_resp 00:55:44:33:22:11 adv_id=4d6fc7 adv_mac=00:55:44:33:22:11 role=1 status=0 session=12ab34 session_mac=00:11:22:33:44:55
+
+Parameters definition:
+ MAC address - Mandatory
+ adv_id - Mandatory local Advertising ID of service connection is being
+ established for
+ adv_mac - Mandatory MAC address that owns/registered the service
+ role - Optional 2 (group client only) or 4 (group owner only)
+ if not present (or 1) role is negotiated by the two peers.
+ status - Mandatory Acceptance/Rejection code of Provisioning
+ session - Mandatory Session ID of the first session to be established
+ session_mac - Mandatory MAC address that owns/initiated the session
+
+p2p_group_add [persistent|persistent=<network id>] [freq=<freq in MHz>]
+ [ht40] [vht] [he]
+
+Set up a P2P group owner manually (i.e., without group owner
+negotiation with a specific peer). This is also known as autonomous
+GO. Optional persistent=<network id> can be used to specify restart of
+a persistent group. Optional freq=<freq in MHz> can be used to force
+the GO to be started on a specific frequency. Special freq=2 or freq=5
+options can be used to request the best 2.4 GHz or 5 GHz band channel
+to be selected automatically.
+
+p2p_reject <peer device address>
+
+Reject connection attempt from a peer (specified with a device
+address). This is a mechanism to reject a pending GO Negotiation with
+a peer and request to automatically block any further connection or
+discovery of the peer.
+
+p2p_group_remove <group interface>
+
+Terminate a P2P group. If a new virtual network interface was used for
+the group, it will also be removed. The network interface name of the
+group interface is used as a parameter for this command.
+
+p2p_cancel
+
+Cancel an ongoing P2P group formation and joining-a-group related
+operation. This operation unauthorizes the specific peer device (if any
+had been authorized to start group formation), stops P2P find (if in
+progress), stops pending operations for join-a-group, and removes the
+P2P group interface (if one was used) that is in the WPS provisioning
+step. If the WPS provisioning step has been completed, the group is not
+terminated.
+
+p2p_remove_client <peer's P2P Device Address|iface=<interface address>>
+
+This command can be used to remove the specified client from all groups
+(operating and persistent) from the local GO. Note that the peer device
+can rejoin the group if it is in possession of a valid key. See p2p_set
+per_sta_psk command below for more details on how the peer can be
+removed securely.
+
+Service Discovery
+
+p2p_service_add asp <auto accept> <adv id> <status 0/1> <Config Methods>
+ <Service name> [Service Information] [Response Info]
+
+This command can be used to search for a P2PS service which includes
+Play, Send, Display, and Print service. The parameters for this command
+are "asp" to identify the command as P2PS one, auto accept value,
+advertisement id which uniquely identifies the service requests, state
+of the service whether the service is available or not, config methods
+which can be either P2PS method or PIN method, service name followed by
+two optional parameters service information, and response info.
+
+For example,
+p2p_service_add asp 1 4d6fc7 0 1108 alt.example.chat svc_info='name=john' rsp_info='enter PIN 1234'
+
+Parameters definition:
+ asp - Mandatory for ASP service registration
+ auto accept - Mandatory ASCII hex-encoded boolean (0 == no auto-accept,
+ 1 == auto-accept ANY role, 2 == auto-accept CLIENT role,
+ 4 == auto-accept GO role)
+ Advertisement ID - Mandatory non-zero ASCII hex-encoded u32
+ (Must be unique/not yet exist in svc db)
+ State - Mandatory ASCII hex-encoded u8 (0 -- Svc not available,
+ 1 -- Svc available, 2-0xff Application defined)
+ Config Methods - Mandatory ASCII hex-encoded u16 (bitmask of WSC config
+ methods)
+ Service Name - Mandatory UTF-8 string
+ Service Information - Optional UTF-8 string
+ Escape single quote & backslash with a backslash:
+ 0x27 == ' == \', and 0x5c == \ == \\
+ Session response information - Optional (used only if auto accept is TRUE)
+ UTF-8 string
+ Escape single quote & backslash with a backslash:
+ 0x27 == ' == \', and 0x5c == \ == \\
+
+p2p_service_rep asp <auto accept> <adv id> <status 0/1> <Config Methods>
+ <Service name> [Service Information] [Response Info]
+
+This command can be used to replace the existing service request
+attributes from the initiator side. The replacement is only allowed if
+the advertisement id issued in the command matches with any one entry in
+the list of existing SD queries. If advertisement id doesn't match the
+command returns a failure.
+
+For example,
+p2p_service_rep asp 1 4d6fc7 1 1108 alt.example.chat svc_info='name=john' rsp_info='enter PIN 1234'
+
+Parameters definition:
+ asp - Mandatory for ASP service registration
+ auto accept - Mandatory ASCII hex-encoded boolean (1 == true, 0 == false)
+ Advertisement ID - Mandatory non-zero ASCII hex-encoded u32
+ (Must already exist in svc db)
+ State - Mandatory ASCII hex-encoded u8 (can be used to indicate svc
+ available or not available for instance)
+ Config Methods - Mandatory ASCII hex-encoded u16 (bitmask of WSC config
+ methods)
+ Service Name - Mandatory UTF-8 string (Must match existing string in svc db)
+ Service Information - Optional UTF-8 string
+ Escape single quote & backslash with a backslash:
+ 0x27 == ' == \', and 0x5c == \ == \\
+ Session response information - Optional (used only if auto accept is TRUE)
+ UTF-8 string
+ Escape single quote & backslash with a backslash:
+ 0x27 == ' == \', and 0x5c == \ == \\
+
+p2p_serv_disc_req
+
+Schedule a P2P service discovery request. The parameters for this
+command are the device address of the peer device (or 00:00:00:00:00:00
+for wildcard query that is sent to every discovered P2P peer that
+supports service discovery) and P2P Service Query TLV(s) as hexdump. For
+example,
+
+p2p_serv_disc_req 00:00:00:00:00:00 02000001
+
+schedules a request for listing all available services of all service
+discovery protocols and requests this to be sent to all discovered
+peers (note: this can result in long response frames). The pending
+requests are sent during device discovery (see p2p_find).
+
+There can be multiple pending peer device specific queries (each will be
+sent in sequence whenever the peer is found).
+
+This command returns an identifier for the pending query (e.g.,
+"1f77628") that can be used to cancel the request. Directed requests
+will be automatically removed when the specified peer has replied to
+it.
+
+Service Query TLV has following format:
+Length (2 octets, little endian) - length of following data
+Service Protocol Type (1 octet) - see the table below
+Service Transaction ID (1 octet) - nonzero identifier for the TLV
+Query Data (Length - 2 octets of data) - service protocol specific data
+
+Service Protocol Types:
+0 = All service protocols
+1 = Bonjour
+2 = UPnP
+3 = WS-Discovery
+4 = Wi-Fi Display
+
+For UPnP, an alternative command format can be used to specify a
+single query TLV (i.e., a service discovery for a specific UPnP
+service):
+
+p2p_serv_disc_req 00:00:00:00:00:00 upnp <version hex> <ST: from M-SEARCH>
+
+For example:
+
+p2p_serv_disc_req 00:00:00:00:00:00 upnp 10 urn:schemas-upnp-org:device:InternetGatewayDevice:1
+
+Additional examples for queries:
+
+# list of all Bonjour services
+p2p_serv_disc_req 00:00:00:00:00:00 02000101
+
+# list of all UPnP services
+p2p_serv_disc_req 00:00:00:00:00:00 02000201
+
+# list of all WS-Discovery services
+p2p_serv_disc_req 00:00:00:00:00:00 02000301
+
+# list of all Bonjour and UPnP services
+p2p_serv_disc_req 00:00:00:00:00:00 0200010102000202
+
+# Apple File Sharing over TCP
+p2p_serv_disc_req 00:00:00:00:00:00 130001010b5f6166706f766572746370c00c000c01
+
+# Bonjour SSTH (supported service type hash)
+p2p_serv_disc_req 00:00:00:00:00:00 05000101000000
+
+# UPnP examples
+p2p_serv_disc_req 00:00:00:00:00:00 upnp 10 ssdp:all
+p2p_serv_disc_req 00:00:00:00:00:00 upnp 10 upnp:rootdevice
+p2p_serv_disc_req 00:00:00:00:00:00 upnp 10 urn:schemas-upnp-org:service:ContentDirectory:2
+p2p_serv_disc_req 00:00:00:00:00:00 upnp 10 uuid:6859dede-8574-59ab-9332-123456789012
+p2p_serv_disc_req 00:00:00:00:00:00 upnp 10 urn:schemas-upnp-org:device:InternetGatewayDevice:1
+
+# Wi-Fi Display examples
+# format: wifi-display <list of roles> <list of subelements>
+p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [source] 2,3,4,5
+p2p_serv_disc_req 02:01:02:03:04:05 wifi-display [pri-sink] 3
+p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [sec-source] 2
+p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [source+sink] 2,3,4,5
+p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [source][pri-sink] 2,3,4,5
+
+p2p_serv_disc_req <Unicast|Broadcast mac address> asp <Transaction ID>
+ <Service Name> [Service Information]
+
+The command can be used for service discovery for P2PS enabled devices.
+
+For example: p2p_serv_disc_req 00:00:00:00:00:00 asp a1 alt.example 'john'
+
+Parameters definition:
+ MAC address - Mandatory Existing
+ asp - Mandatory for ASP queries
+ Transaction ID - Mandatory non-zero ASCII hex-encoded u8 for GAS
+ Service Name Prefix - Mandatory UTF-8 string.
+ Will match from beginning of remote Service Name
+ Service Information Substring - Optional UTF-8 string
+ If Service Information Substring is not included, all services matching
+ Service Name Prefix will be returned.
+ If Service Information Substring is included, both the Substring and the
+ Service Name Prefix must match for service to be returned.
+ If remote service has no Service Information, all Substring searches
+ will fail.
+
+p2p_serv_disc_cancel_req <query identifier>
+
+Cancel a pending P2P service discovery request. This command takes a
+single parameter: identifier for the pending query (the value returned
+by p2p_serv_disc_req, e.g., "p2p_serv_disc_cancel_req 1f77628".
+
+p2p_serv_disc_resp
+
+Reply to a service discovery query. This command takes following
+parameters: frequency in MHz, destination address, dialog token,
+response TLV(s). The first three parameters are copied from the
+request event. For example, "p2p_serv_disc_resp 2437 02:40:61:c2:f3:b7
+1 0300000101". This command is used only if external program is used
+to process the request (see p2p_serv_disc_external).
+
+p2p_service_update
+
+Indicate that local services have changed. This is used to increment
+the P2P service indicator value so that peers know when previously
+cached information may have changed. This is only needed when external
+service discovery processing is enabled since the commands to
+pre-configure services for internal processing will increment the
+indicator automatically.
+
+p2p_serv_disc_external <0|1>
+
+Configure external processing of P2P service requests: 0 (default) =
+no external processing of requests (i.e., internal code will process
+each request based on pre-configured services), 1 = external
+processing of requests (external program is responsible for replying
+to service discovery requests with p2p_serv_disc_resp). Please note
+that there is quite strict limit on how quickly the response needs to
+be transmitted, so use of the internal processing is strongly
+recommended.
+
+p2p_service_add bonjour <query hexdump> <RDATA hexdump>
+
+Add a local Bonjour service for internal SD query processing.
+
+Examples:
+
+# AFP Over TCP (PTR)
+p2p_service_add bonjour 0b5f6166706f766572746370c00c000c01 074578616d706c65c027
+# AFP Over TCP (TXT) (RDATA=null)
+p2p_service_add bonjour 076578616d706c650b5f6166706f766572746370c00c001001 00
+
+# IP Printing over TCP (PTR) (RDATA=MyPrinter._ipp._tcp.local.)
+p2p_service_add bonjour 045f697070c00c000c01 094d795072696e746572c027
+# IP Printing over TCP (TXT) (RDATA=txtvers=1,pdl=application/postscript)
+p2p_service_add bonjour 096d797072696e746572045f697070c00c001001 09747874766572733d311a70646c3d6170706c69636174696f6e2f706f7374736372797074
+
+# Supported Service Type Hash (SSTH)
+p2p_service_add bonjour 000000 <32-byte bitfield as hexdump>
+(note: see P2P spec Annex E.4 for information on how to construct the bitfield)
+
+p2p_service_del bonjour <query hexdump>
+
+Remove a local Bonjour service from internal SD query processing.
+
+p2p_service_add upnp <version hex> <service>
+
+Add a local UPnP service for internal SD query processing.
+
+Examples:
+
+p2p_service_add upnp 10 uuid:6859dede-8574-59ab-9332-123456789012::upnp:rootdevice
+p2p_service_add upnp 10 uuid:5566d33e-9774-09ab-4822-333456785632::upnp:rootdevice
+p2p_service_add upnp 10 uuid:1122de4e-8574-59ab-9322-333456789044::urn:schemas-upnp-org:service:ContentDirectory:2
+p2p_service_add upnp 10 uuid:5566d33e-9774-09ab-4822-333456785632::urn:schemas-upnp-org:service:ContentDirectory:2
+p2p_service_add upnp 10 uuid:6859dede-8574-59ab-9332-123456789012::urn:schemas-upnp-org:device:InternetGatewayDevice:1
+
+p2p_service_del upnp <version hex> <service>
+
+Remove a local UPnP service from internal SD query processing.
+
+p2p_service_del asp <adv id>
+
+Removes the local asp service from internal SD query list.
+For example: p2p_service_del asp 4d6fc7
+
+p2p_service_flush
+
+Remove all local services from internal SD query processing.
+
+Invitation
+
+p2p_invite [persistent=<network id>|group=<group ifname>] [peer=address]
+ [go_dev_addr=address] [freq=<freq in MHz>] [ht40] [vht] [he]
+ [pref=<MHz>]
+
+Invite a peer to join a group (e.g., group=wlan1) or to reinvoke a
+persistent group (e.g., persistent=4). If the peer device is the GO of
+the persistent group, the peer parameter is not needed. Otherwise it is
+used to specify which device to invite. go_dev_addr parameter can be
+used to override the GO device address for Invitation Request should
+it be not known for some reason (this should not be needed in most
+cases). When reinvoking a persistent group, the GO device can specify
+the frequency for the group with the freq parameter. When reinvoking a
+persistent group, the P2P client device can use freq parameter to force
+a specific operating channel (or invitation failure if GO rejects that)
+or pref parameter to request a specific channel (while allowing GO to
+select to use another channel, if needed).
+
+Group Operations
+
+(These are used on the group interface.)
+
+wps_pin <any|address> <PIN>
+
+Start WPS PIN method. This allows a single WPS Enrollee to connect to
+the AP/GO. This is used on the GO when a P2P client joins an existing
+group. The second parameter is the address of the Enrollee or a string
+"any" to allow any station to use the entered PIN (which will restrict
+the PIN for one-time-use). PIN is the Enrollee PIN read either from a
+label or display on the P2P Client/WPS Enrollee.
+
+wps_pbc
+
+Start WPS PBC method (i.e., push the button). This allows a single WPS
+Enrollee to connect to the AP/GO. This is used on the GO when a P2P
+client joins an existing group.
+
+p2p_get_passphrase
+
+Get the passphrase for a group (only available when acting as a GO).
+
+p2p_presence_req [<duration> <interval>] [<duration> <interval>]
+
+Send a P2P Presence Request to the GO (this is only available when
+acting as a P2P client). If no duration/interval pairs are given, the
+request indicates that this client has no special needs for GO
+presence. The first parameter pair gives the preferred duration and
+interval values in microseconds. If the second pair is included, that
+indicates which value would be acceptable. This command returns OK
+immediately and the response from the GO is indicated in a
+P2P-PRESENCE-RESPONSE event message.
+
+Parameters
+
+p2p_ext_listen [<period> <interval>]
+
+Configure Extended Listen Timing. If the parameters are omitted, this
+feature is disabled. If the parameters are included, Listen State will
+be entered every interval msec for at least period msec. Both values
+have acceptable range of 1-65535 (with interval obviously having to be
+larger than or equal to duration). If the P2P module is not idle at
+the time the Extended Listen Timing timeout occurs, the Listen State
+operation will be skipped.
+
+The configured values will also be advertised to other P2P Devices. The
+received values are available in the p2p_peer command output:
+
+ext_listen_period=100 ext_listen_interval=5000
+
+p2p_set <field> <value>
+
+Change dynamic P2P parameters
+
+p2p_set discoverability <0/1>
+
+Disable/enable advertisement of client discoverability. This is
+enabled by default and this parameter is mainly used to allow testing
+of device discoverability.
+
+p2p_set managed <0/1>
+
+Disable/enable managed P2P Device operations. This is disabled by
+default.
+
+p2p_set listen_channel <channel> [<op_class>]
+
+Set P2P Listen channel. This is mainly meant for testing purposes and
+changing the Listen channel during normal operations can result in
+protocol failures.
+
+When specifying a social channel on the 2.4 GHz band (1/6/11) there is
+no need to specify the operating class since it defaults to 81. When
+specifying a social channel on the 60 GHz band (2), specify the 60 GHz
+operating class (180).
+
+p2p_set ssid_postfix <postfix>
+
+Set postfix string to be added to the automatically generated P2P SSID
+(DIRECT-<two random characters>). For example, postfix of "-testing"
+could result in the SSID becoming DIRECT-ab-testing.
+
+p2p_set per_sta_psk <0/1>
+
+Disabled(default)/enables use of per-client PSK in the P2P groups. This
+can be used to request GO to assign a unique PSK for each client during
+WPS provisioning. When enabled, this allow clients to be removed from
+the group securely with p2p_remove_client command since that client's
+PSK is removed at the same time to prevent it from connecting back using
+the old PSK. When per-client PSK is not used, the client can still be
+disconnected, but it will be able to re-join the group since the PSK it
+learned previously is still valid. It should be noted that the default
+passphrase on the GO that is normally used to allow legacy stations to
+connect through manual configuration does not change here, so if that is
+shared, devices with knowledge of that passphrase can still connect.
+
+set <field> <value>
+
+Set global configuration parameters which may also affect P2P
+operations. The format on these parameters is same as is used in
+wpa_supplicant.conf. Only the parameters listen here should be
+changed. Modifying other parameters may result in incorrect behavior
+since not all existing users of the parameters are updated.
+
+set uuid <UUID>
+
+Set WPS UUID (by default, this is generated based on the MAC address).
+
+set device_name <device name>
+
+Set WPS Device Name (also included in some P2P messages).
+
+set manufacturer <manufacturer>
+
+Set WPS Manufacturer.
+
+set model_name <model name>
+
+Set WPS Model Name.
+
+set model_number <model number>
+
+Set WPS Model Number.
+
+set serial_number <serial number>
+
+Set WPS Serial Number.
+
+set device_type <device type>
+
+Set WPS Device Type.
+
+set os_version <OS version>
+
+Set WPS OS Version.
+
+set config_methods <config methods>
+
+Set WPS Configuration Methods.
+
+set sec_device_type <device type>
+
+Add a new Secondary Device Type.
+
+set p2p_go_intent <GO intent>
+
+Set the default P2P GO Intent. Note: This value can be overridden in
+p2p_connect command and as such, there should be no need to change the
+default value here during normal operations.
+
+set p2p_ssid_postfix <P2P SSID postfix>
+
+Set P2P SSID postfix.
+
+set persistent_reconnect <0/1>
+
+Disable/enabled persistent reconnect for reinvocation of persistent
+groups. If enabled, invitations to reinvoke a persistent group will be
+accepted without separate authorization (e.g., user interaction).
+
+set country <two character country code>
+
+Set country code (this is included in some P2P messages).
+
+set p2p_search_delay <delay>
+
+Set p2p_search_delay which adds extra delay in milliseconds between
+concurrent search iterations to make p2p_find friendlier to concurrent
+operations by avoiding it from taking 100% of radio resources. The
+default value is 500 ms.
+
+Status
+
+p2p_peers [discovered]
+
+List P2P Device Addresses of all the P2P peers we know. The optional
+"discovered" parameter filters out the peers that we have not fully
+discovered, i.e., which we have only seen in a received Probe Request
+frame.
+
+p2p_peer <P2P Device Address>
+
+Fetch information about a known P2P peer.
+
+Group Status
+
+(These are used on the group interface.)
+
+status
+
+Show status information (connection state, role, use encryption
+parameters, IP address, etc.).
+
+sta
+
+Show information about an associated station (when acting in AP/GO role).
+
+all_sta
+
+Lists the currently associated stations.
+
+Configuration data
+
+list_networks
+
+Lists the configured networks, including stored information for
+persistent groups. The identifier in this list is used with
+p2p_group_add and p2p_invite to indicate which persistent group is to
+be reinvoked.
+
+remove_network <network id>
+
+Remove a network entry from configuration.
+
+
+P2PS Events/Responses:
+
+P2PS-PROV-START: This events gets triggered when provisioning is issued for
+either seeker or advertiser.
+
+For example,
+P2PS-PROV-START 00:55:44:33:22:11 adv_id=111 adv_mac=00:55:44:33:22:11 conncap=1 session=1234567 session_mac=00:11:22:33:44:55 info='xxxx'
+
+Parameters definition:
+ MAC address - always
+ adv_id - always ASCII hex-encoded u32
+ adv_mac - always MAC address that owns/registered the service
+ conncap - always mask of 0x01 (new), 0x02 (group client), 0x04 (group owner)
+ bits
+ session - always Session ID of the first session to be established
+ session_mac - always MAC address that owns/initiated the session
+ info - if available, UTF-8 string
+ Escaped single quote & backslash with a backslash:
+ \' == 0x27 == ', and \\ == 0x5c == \
+
+P2PS-PROV-DONE: When provisioning is completed then this event gets triggered.
+
+For example,
+P2PS-PROV-DONE 00:11:22:33:44:55 status=0 adv_id=111 adv_mac=00:55:44:33:22:11 conncap=1 session=1234567 session_mac=00:11:22:33:44:55 [dev_passwd_id=8 | go=p2p-wlan0-0 | join=11:22:33:44:55:66 | persist=0]
+
+Parameters definition:
+ MAC address - always main device address of peer. May be different from MAC
+ ultimately connected to.
+ status - always ascii hex-encoded u8 (0 == success, 12 == deferred success)
+ adv_id - always ascii hex-encoded u32
+ adv_mac - always MAC address that owns/registered the service
+ conncap - always One of: 1 (new), 2 (group client), 4 (group owner) bits
+ session - always Session ID of the first session to be established
+ session_mac - always MAC address that owns/initiated the session
+ dev_passwd_id - only if conncap value == 1 (New GO negotiation)
+ 8 - "p2ps" password must be passed in p2p_connect command
+ 1 - "display" password must be passed in p2p_connect command
+ 5 - "keypad" password must be passed in p2p_connect command
+ join only - if conncap value == 2 (Client Only). Display password and "join"
+ must be passed in p2p_connect and address must be the MAC specified
+ go only - if conncap value == 4 (GO Only). Interface name must be set with a
+ password
+ persist - only if previous persistent group existed between peers and shall
+ be re-used. Group is restarted by sending "p2p_group_add persistent=0"
+ where value is taken from P2P-PROV-DONE
+
+Extended Events/Response
+
+P2P-DEVICE-FOUND 00:11:22:33:44:55 p2p_dev_addr=00:11:22:33:44:55 pri_dev_type=0-00000000-0 name='' config_methods=0x108 dev_capab=0x21 group_capab=0x0 adv_id=111 asp_svc=alt.example.chat
+
+Parameters definition:
+ adv_id - if ASP ASCII hex-encoded u32. If it is reporting the
+ "wildcard service", this value will be 0
+ asp_svc - if ASP this is the service string. If it is reporting the
+ "wildcard service", this value will be org.wi-fi.wfds
+
+
+wpa_cli action script
+---------------------
+
+See examples/p2p-action.sh
+
+TODO: describe DHCP/DNS setup
+TODO: cross-connection
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/README-WPS b/ap/app/wpa_supplicant-2.10/wpa_supplicant/README-WPS
new file mode 100755
index 0000000..b884f67
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/README-WPS
@@ -0,0 +1,399 @@
+wpa_supplicant and Wi-Fi Protected Setup (WPS)
+==============================================
+
+This document describes how the WPS implementation in wpa_supplicant
+can be configured and how an external component on the client (e.g.,
+management GUI) is used to enable WPS enrollment and registrar
+registration.
+
+
+Introduction to WPS
+-------------------
+
+Wi-Fi Protected Setup (WPS) is a mechanism for easy configuration of a
+wireless network. It allows automated generation of random keys (WPA
+passphrase/PSK) and configuration of an access point and client
+devices. WPS includes number of methods for setting up connections
+with PIN method and push-button configuration (PBC) being the most
+commonly deployed options.
+
+While WPS can enable more home networks to use encryption in the
+wireless network, it should be noted that the use of the PIN and
+especially PBC mechanisms for authenticating the initial key setup is
+not very secure. As such, use of WPS may not be suitable for
+environments that require secure network access without chance for
+allowing outsiders to gain access during the setup phase.
+
+WPS uses following terms to describe the entities participating in the
+network setup:
+- access point: the WLAN access point
+- Registrar: a device that control a network and can authorize
+ addition of new devices); this may be either in the AP ("internal
+ Registrar") or in an external device, e.g., a laptop, ("external
+ Registrar")
+- Enrollee: a device that is being authorized to use the network
+
+It should also be noted that the AP and a client device may change
+roles (i.e., AP acts as an Enrollee and client device as a Registrar)
+when WPS is used to configure the access point.
+
+
+More information about WPS is available from Wi-Fi Alliance:
+http://www.wi-fi.org/wifi-protected-setup
+
+
+wpa_supplicant implementation
+-----------------------------
+
+wpa_supplicant includes an optional WPS component that can be used as
+an Enrollee to enroll new network credential or as a Registrar to
+configure an AP.
+
+
+wpa_supplicant configuration
+----------------------------
+
+WPS is an optional component that needs to be enabled in
+wpa_supplicant build configuration (.config). Here is an example
+configuration that includes WPS support and Linux nl80211 -based
+driver interface:
+
+CONFIG_DRIVER_NL80211=y
+CONFIG_WPS=y
+
+If you want to enable WPS external registrar (ER) functionality, you
+will also need to add following line:
+
+CONFIG_WPS_ER=y
+
+Following parameter can be used to enable support for NFC config method:
+
+CONFIG_WPS_NFC=y
+
+
+WPS needs the Universally Unique IDentifier (UUID; see RFC 4122) for
+the device. This is configured in the runtime configuration for
+wpa_supplicant (if not set, UUID will be generated based on local MAC
+address):
+
+# example UUID for WPS
+uuid=12345678-9abc-def0-1234-56789abcdef0
+
+The network configuration blocks needed for WPS are added
+automatically based on control interface commands, so they do not need
+to be added explicitly in the configuration file.
+
+WPS registration will generate new network blocks for the acquired
+credentials. If these are to be stored for future use (after
+restarting wpa_supplicant), wpa_supplicant will need to be configured
+to allow configuration file updates:
+
+update_config=1
+
+
+
+External operations
+-------------------
+
+WPS requires either a device PIN code (usually, 8-digit number) or a
+pushbutton event (for PBC) to allow a new WPS Enrollee to join the
+network. wpa_supplicant uses the control interface as an input channel
+for these events.
+
+The PIN value used in the commands must be processed by an UI to
+remove non-digit characters and potentially, to verify the checksum
+digit. "wpa_cli wps_check_pin <PIN>" can be used to do such processing.
+It returns FAIL if the PIN is invalid, or FAIL-CHECKSUM if the checksum
+digit is incorrect, or the processed PIN (non-digit characters removed)
+if the PIN is valid.
+
+If the client device has a display, a random PIN has to be generated
+for each WPS registration session. wpa_supplicant can do this with a
+control interface request, e.g., by calling wpa_cli:
+
+wpa_cli wps_pin any
+
+This will return the generated 8-digit PIN which will then need to be
+entered at the Registrar to complete WPS registration. At that point,
+the client will be enrolled with credentials needed to connect to the
+AP to access the network.
+
+
+If the client device does not have a display that could show the
+random PIN, a hardcoded PIN that is printed on a label can be
+used. wpa_supplicant is notified this with a control interface
+request, e.g., by calling wpa_cli:
+
+wpa_cli wps_pin any 12345670
+
+This starts the WPS negotiation in the same way as above with the
+generated PIN.
+
+When the wps_pin command is issued for an AP (including P2P GO) mode
+interface, an optional timeout parameter can be used to specify
+expiration timeout for the PIN in seconds. For example:
+
+wpa_cli wps_pin any 12345670 300
+
+
+If a random PIN is needed for a user interface, "wpa_cli wps_pin get"
+can be used to generate a new PIN without starting WPS negotiation.
+This random PIN can then be passed as an argument to another wps_pin
+call when the actual operation should be started.
+
+If the client design wants to support optional WPS PBC mode, this can
+be enabled by either a physical button in the client device or a
+virtual button in the user interface. The PBC operation requires that
+a button is also pressed at the AP/Registrar at about the same time (2
+minute window). wpa_supplicant is notified of the local button event
+over the control interface, e.g., by calling wpa_cli:
+
+wpa_cli wps_pbc
+
+At this point, the AP/Registrar has two minutes to complete WPS
+negotiation which will generate a new WPA PSK in the same way as the
+PIN method described above.
+
+
+If the client wants to operate in the Registrar role to learn the
+current AP configuration and optionally, to configure an AP,
+wpa_supplicant is notified over the control interface, e.g., with
+wpa_cli:
+
+wpa_cli wps_reg <AP BSSID> <AP PIN>
+(example: wpa_cli wps_reg 02:34:56:78:9a:bc 12345670)
+
+This is used to fetch the current AP settings instead of actually
+changing them. The main difference with the wps_pin command is that
+wps_reg uses the AP PIN (e.g., from a label on the AP) instead of a
+PIN generated at the client.
+
+In order to change the AP configuration, the new configuration
+parameters are given to the wps_reg command:
+
+wpa_cli wps_reg <AP BSSID> <AP PIN> <new SSID> <auth> <encr> <new key>
+examples:
+ wpa_cli wps_reg 02:34:56:78:9a:bc 12345670 testing WPA2PSK CCMP 12345678
+ wpa_cli wps_reg 02:34:56:78:9a:bc 12345670 clear OPEN NONE ""
+
+<auth> must be one of the following: OPEN WPAPSK WPA2PSK
+<encr> must be one of the following: NONE WEP TKIP CCMP
+
+
+Scanning
+--------
+
+Scan results ('wpa_cli scan_results' or 'wpa_cli bss <idx>') include a
+flags field that is used to indicate whether the BSS support WPS. If
+the AP support WPS, but has not recently activated a Registrar, [WPS]
+flag will be included. If PIN method has been recently selected,
+[WPS-PIN] is shown instead. Similarly, [WPS-PBC] is shown if PBC mode
+is in progress. GUI programs can use these as triggers for suggesting
+a guided WPS configuration to the user. In addition, control interface
+monitor events WPS-AP-AVAILABLE{,-PBC,-PIN} can be used to find out if
+there are WPS enabled APs in scan results without having to go through
+all the details in the GUI. These notification could be used, e.g., to
+suggest possible WPS connection to the user.
+
+
+wpa_gui
+-------
+
+wpa_gui-qt4 directory contains a sample GUI that shows an example of
+how WPS support can be integrated into the GUI. Its main window has a
+WPS tab that guides user through WPS registration with automatic AP
+selection. In addition, it shows how WPS can be started manually by
+selecting an AP from scan results.
+
+
+Credential processing
+---------------------
+
+By default, wpa_supplicant processes received credentials and updates
+its configuration internally. However, it is possible to
+control these operations from external programs, if desired.
+
+This internal processing can be disabled with wps_cred_processing=1
+option. When this is used, an external program is responsible for
+processing the credential attributes and updating wpa_supplicant
+configuration based on them.
+
+Following control interface messages are sent out for external programs:
+
+WPS-CRED-RECEIVED <hexdump of Credential attribute(s)>
+For example:
+<2>WPS-CRED-RECEIVED 100e006f10260001011045000c6a6b6d2d7770732d74657374100300020020100f000200081027004030653462303435366332363666653064333961643135353461316634626637313234333761636664623766333939653534663166316230323061643434386235102000060266a0ee1727
+
+
+wpa_supplicant as WPS External Registrar (ER)
+---------------------------------------------
+
+wpa_supplicant can be used as a WPS ER to configure an AP or enroll
+new Enrollee to join the network. This functionality uses UPnP and
+requires that a working IP connectivity is available with the AP (this
+can be either over a wired or wireless connection).
+
+Separate wpa_supplicant process can be started for WPS ER
+operations. A special "none" driver can be used in such a case to
+indicate that no local network interface is actually controlled. For
+example, following command could be used to start the ER:
+
+wpa_supplicant -Dnone -c er.conf -ieth0
+
+Sample er.conf:
+
+ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=admin
+device_name=WPS External Registrar
+
+
+wpa_cli commands for ER functionality:
+
+wps_er_start [IP address]
+- start WPS ER functionality
+- the optional IP address parameter can be used to filter operations only
+ to include a single AP
+- if run again while ER is active, the stored information (discovered APs
+ and Enrollees) are shown again
+
+wps_er_stop
+- stop WPS ER functionality
+
+wps_er_learn <UUID|BSSID> <AP PIN>
+- learn AP configuration
+
+wps_er_set_config <UUID|BSSID> <network id>
+- use AP configuration from a locally configured network (e.g., from
+ wps_reg command); this does not change the AP's configuration, but
+ only prepares a configuration to be used when enrolling a new device
+ to the AP
+
+wps_er_config <UUID|BSSID> <AP PIN> <new SSID> <auth> <encr> <new key>
+- examples:
+ wps_er_config 87654321-9abc-def0-1234-56789abc0002 12345670 testing WPA2PSK CCMP 12345678
+ wpa_er_config 87654321-9abc-def0-1234-56789abc0002 12345670 clear OPEN NONE ""
+
+<auth> must be one of the following: OPEN WPAPSK WPA2PSK
+<encr> must be one of the following: NONE WEP TKIP CCMP
+
+
+wps_er_pbc <Enrollee UUID|MAC address>
+- accept an Enrollee PBC using External Registrar
+
+wps_er_pin <Enrollee UUID|"any"|MAC address> <PIN> [Enrollee MAC address]
+- add an Enrollee PIN to External Registrar
+- if Enrollee UUID is not known, "any" can be used to add a wildcard PIN
+- if the MAC address of the enrollee is known, it should be configured
+ to allow the AP to advertise list of authorized enrollees
+
+
+WPS ER events:
+
+WPS_EVENT_ER_AP_ADD
+- WPS ER discovered an AP
+
+WPS-ER-AP-ADD 87654321-9abc-def0-1234-56789abc0002 02:11:22:33:44:55 pri_dev_type=6-0050F204-1 wps_state=1 |Very friendly name|Company|Long description of the model|WAP|http://w1.fi/|http://w1.fi/hostapd/
+
+WPS_EVENT_ER_AP_REMOVE
+- WPS ER removed an AP entry
+
+WPS-ER-AP-REMOVE 87654321-9abc-def0-1234-56789abc0002
+
+WPS_EVENT_ER_ENROLLEE_ADD
+- WPS ER discovered a new Enrollee
+
+WPS-ER-ENROLLEE-ADD 2b7093f1-d6fb-5108-adbb-bea66bb87333 02:66:a0:ee:17:27 M1=1 config_methods=0x14d dev_passwd_id=0 pri_dev_type=1-0050F204-1 |Wireless Client|Company|cmodel|123|12345|
+
+WPS_EVENT_ER_ENROLLEE_REMOVE
+- WPS ER removed an Enrollee entry
+
+WPS-ER-ENROLLEE-REMOVE 2b7093f1-d6fb-5108-adbb-bea66bb87333 02:66:a0:ee:17:27
+
+WPS-ER-AP-SETTINGS
+- WPS ER learned AP settings
+
+WPS-ER-AP-SETTINGS uuid=fd91b4ec-e3fa-5891-a57d-8c59efeed1d2 ssid=test-wps auth_type=0x0020 encr_type=0x0008 key=12345678
+
+
+WPS with NFC
+------------
+
+WPS can be used with NFC-based configuration method. An NFC tag
+containing a password token from the Enrollee can be used to
+authenticate the connection instead of the PIN. In addition, an NFC tag
+with a configuration token can be used to transfer AP settings without
+going through the WPS protocol.
+
+When the station acts as an Enrollee, a local NFC tag with a password
+token can be used by touching the NFC interface of a Registrar.
+
+"wps_nfc [BSSID]" command starts WPS protocol run with the local end as
+the Enrollee using the NFC password token that is either pre-configured
+in the configuration file (wps_nfc_dev_pw_id, wps_nfc_dh_pubkey,
+wps_nfc_dh_privkey, wps_nfc_dev_pw) or generated dynamically with
+"wps_nfc_token <WPS|NDEF>" command. The included nfc_pw_token tool
+(build with "make nfc_pw_token") can be used to generate NFC password
+tokens during manufacturing (each station needs to have its own random
+keys).
+
+The "wps_nfc_config_token <WPS/NDEF>" command can be used to build an
+NFC configuration token when wpa_supplicant is controlling an AP
+interface (AP or P2P GO). The output value from this command is a
+hexdump of the current AP configuration (WPS parameter requests this to
+include only the WPS attributes; NDEF parameter requests additional NDEF
+encapsulation to be included). This data needs to be written to an NFC
+tag with an external program. Once written, the NFC configuration token
+can be used to touch an NFC interface on a station to provision the
+credentials needed to access the network.
+
+The "wps_nfc_config_token <WPS/NDEF> <network id>" command can be used
+to build an NFC configuration token based on a locally configured
+network.
+
+If the station includes NFC interface and reads an NFC tag with a MIME
+media type "application/vnd.wfa.wsc", the NDEF message payload (with or
+without NDEF encapsulation) can be delivered to wpa_supplicant using the
+following wpa_cli command:
+
+wps_nfc_tag_read <hexdump of payload>
+
+If the NFC tag contains a configuration token, the network is added to
+wpa_supplicant configuration. If the NFC tag contains a password token,
+the token is added to the WPS Registrar component. This information can
+then be used with wps_reg command (when the NFC password token was from
+an AP) using a special value "nfc-pw" in place of the PIN parameter. If
+the ER functionality has been started (wps_er_start), the NFC password
+token is used to enable enrollment of a new station (that was the source
+of the NFC password token).
+
+"nfc_get_handover_req <NDEF> <WPS-CR>" command can be used to build the
+WPS carrier record for a Handover Request Message for connection
+handover. The first argument selects the format of the output data and
+the second argument selects which type of connection handover is
+requested (WPS-CR = Wi-Fi handover as specified in WSC 2.0).
+
+"nfc_get_handover_sel <NDEF> <WPS> [UUID|BSSID]" command can be used to
+build the contents of a Handover Select Message for connection handover
+when this does not depend on the contents of the Handover Request
+Message. The first argument selects the format of the output data and
+the second argument selects which type of connection handover is
+requested (WPS = Wi-Fi handover as specified in WSC 2.0). If the options
+UUID|BSSID argument is included, this is a request to build the handover
+message for the specified AP when wpa_supplicant is operating as a WPS
+ER.
+
+"nfc_report_handover <INIT/RESP> WPS <carrier from handover request>
+<carrier from handover select>" can be used as an alternative way for
+reporting completed NFC connection handover. The first parameter
+indicates whether the local device initiated or responded to the
+connection handover and the carrier records are the selected carrier
+from the handover request and select messages as a hexdump.
+
+The "wps_er_nfc_config_token <WPS/NDEF> <UUID|BSSID>" command can be
+used to build an NFC configuration token for the specified AP when
+wpa_supplicant is operating as a WPS ER. The output value from this
+command is a hexdump of the selected AP configuration (WPS parameter
+requests this to include only the WPS attributes; NDEF parameter
+requests additional NDEF encapsulation to be included). This data needs
+to be written to an NFC tag with an external program. Once written, the
+NFC configuration token can be used to touch an NFC interface on a
+station to provision the credentials needed to access the network.
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/README-Windows.txt b/ap/app/wpa_supplicant-2.10/wpa_supplicant/README-Windows.txt
new file mode 100755
index 0000000..7288abd
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/README-Windows.txt
@@ -0,0 +1,299 @@
+wpa_supplicant for Windows
+==========================
+
+Copyright (c) 2003-2009, Jouni Malinen <j@w1.fi> and contributors
+All Rights Reserved.
+
+This program is licensed under the BSD license (the one with
+advertisement clause removed).
+
+
+wpa_supplicant has support for being used as a WPA/WPA2/IEEE 802.1X
+Supplicant on Windows. The current port requires that WinPcap
+(http://winpcap.polito.it/) is installed for accessing packets and the
+driver interface. Both release versions 3.0 and 3.1 are supported.
+
+The current port is still somewhat experimental. It has been tested
+mainly on Windows XP (SP2) with limited set of NDIS drivers. In
+addition, the current version has been reported to work with Windows
+2000.
+
+All security modes have been verified to work (at least complete
+authentication and successfully ping a wired host):
+- plaintext
+- static WEP / open system authentication
+- static WEP / shared key authentication
+- IEEE 802.1X with dynamic WEP keys
+- WPA-PSK, TKIP, CCMP, TKIP+CCMP
+- WPA-EAP, TKIP, CCMP, TKIP+CCMP
+- WPA2-PSK, TKIP, CCMP, TKIP+CCMP
+- WPA2-EAP, TKIP, CCMP, TKIP+CCMP
+
+
+Building wpa_supplicant with mingw
+----------------------------------
+
+The default build setup for wpa_supplicant is to use MinGW and
+cross-compiling from Linux to MinGW/Windows. It should also be
+possible to build this under Windows using the MinGW tools, but that
+is not tested nor supported and is likely to require some changes to
+the Makefile unless cygwin is used.
+
+
+Building wpa_supplicant with MSVC
+---------------------------------
+
+wpa_supplicant can be built with Microsoft Visual C++ compiler. This
+has been tested with Microsoft Visual C++ Toolkit 2003 and Visual
+Studio 2005 using the included nmake.mak as a Makefile for nmake. IDE
+can also be used by creating a project that includes the files and
+defines mentioned in nmake.mak. Example VS2005 solution and project
+files are included in vs2005 subdirectory. This can be used as a
+starting point for building the programs with VS2005 IDE. Visual Studio
+2008 Express Edition is also able to use these project files.
+
+WinPcap development package is needed for the build and this can be
+downloaded from http://www.winpcap.org/install/bin/WpdPack_4_0_2.zip. The
+default nmake.mak expects this to be unpacked into C:\dev\WpdPack so
+that Include and Lib directories are in this directory. The files can be
+stored elsewhere as long as the WINPCAPDIR in nmake.mak is updated to
+match with the selected directory. In case a project file in the IDE is
+used, these Include and Lib directories need to be added to project
+properties as additional include/library directories.
+
+OpenSSL source package can be downloaded from
+http://www.openssl.org/source/openssl-0.9.8i.tar.gz and built and
+installed following instructions in INSTALL.W32. Note that if EAP-FAST
+support will be included in the wpa_supplicant, OpenSSL needs to be
+patched to# support it openssl-0.9.8i-tls-extensions.patch. The example
+nmake.mak file expects OpenSSL to be installed into C:\dev\openssl, but
+this directory can be modified by changing OPENSSLDIR variable in
+nmake.mak.
+
+If you do not need EAP-FAST support, you may also be able to use Win32
+binary installation package of OpenSSL from
+http://www.slproweb.com/products/Win32OpenSSL.html instead of building
+the library yourself. In this case, you will need to copy Include and
+Lib directories in suitable directory, e.g., C:\dev\openssl for the
+default nmake.mak. Copy {Win32OpenSSLRoot}\include into
+C:\dev\openssl\include and make C:\dev\openssl\lib subdirectory with
+files from {Win32OpenSSLRoot}\VC (i.e., libeay*.lib and ssleay*.lib).
+This will end up using dynamically linked OpenSSL (i.e., .dll files are
+needed) for it. Alternative, you can copy files from
+{Win32OpenSSLRoot}\VC\static to create a static build (no OpenSSL .dll
+files needed).
+
+
+Building wpa_supplicant for cygwin
+----------------------------------
+
+wpa_supplicant can be built for cygwin by installing the needed
+development packages for cygwin. This includes things like compiler,
+make, openssl development package, etc. In addition, developer's pack
+for WinPcap (WPdpack.zip) from
+http://winpcap.polito.it/install/default.htm is needed.
+
+.config file should enable only one driver interface,
+CONFIG_DRIVER_NDIS. In addition, include directories may need to be
+added to match the system. An example configuration is available in
+defconfig. The library and include files for WinPcap will either need
+to be installed in compiler/linker default directories or their
+location will need to be adding to .config when building
+wpa_supplicant.
+
+Othen than this, the build should be more or less identical to Linux
+version, i.e., just run make after having created .config file. An
+additional tool, win_if_list.exe, can be built by running "make
+win_if_list".
+
+
+Building wpa_gui
+----------------
+
+wpa_gui uses Qt application framework from Trolltech. It can be built
+with the open source version of Qt4 and MinGW. Following commands can
+be used to build the binary in the Qt 4 Command Prompt:
+
+# go to the root directory of wpa_supplicant source code
+cd wpa_gui-qt4
+qmake -o Makefile wpa_gui.pro
+make
+# the wpa_gui.exe binary is created into 'release' subdirectory
+
+
+Using wpa_supplicant for Windows
+--------------------------------
+
+wpa_supplicant, wpa_cli, and wpa_gui behave more or less identically to
+Linux version, so instructions in README and example wpa_supplicant.conf
+should be applicable for most parts. In addition, there is another
+version of wpa_supplicant, wpasvc.exe, which can be used as a Windows
+service and which reads its configuration from registry instead of
+text file.
+
+When using access points in "hidden SSID" mode, ap_scan=2 mode need to
+be used (see wpa_supplicant.conf for more information).
+
+Windows NDIS/WinPcap uses quite long interface names, so some care
+will be needed when starting wpa_supplicant. Alternatively, the
+adapter description can be used as the interface name which may be
+easier since it is usually in more human-readable
+format. win_if_list.exe can be used to find out the proper interface
+name.
+
+Example steps in starting up wpa_supplicant:
+
+# win_if_list.exe
+ifname: \Device\NPF_GenericNdisWanAdapter
+description: Generic NdisWan adapter
+
+ifname: \Device\NPF_{769E012B-FD17-4935-A5E3-8090C38E25D2}
+description: Atheros Wireless Network Adapter (Microsoft's Packet Scheduler)
+
+ifname: \Device\NPF_{732546E7-E26C-48E3-9871-7537B020A211}
+description: Intel 8255x-based Integrated Fast Ethernet (Microsoft's Packet Scheduler)
+
+
+Since the example configuration used Atheros WLAN card, the middle one
+is the correct interface in this case. The interface name for -i
+command line option is the full string following "ifname:" (the
+"\Device\NPF_" prefix can be removed). In other words, wpa_supplicant
+would be started with the following command:
+
+# wpa_supplicant.exe -i'{769E012B-FD17-4935-A5E3-8090C38E25D2}' -c wpa_supplicant.conf -d
+
+-d optional enables some more debugging (use -dd for even more, if
+needed). It can be left out if debugging information is not needed.
+
+With the alternative mechanism for selecting the interface, this
+command has identical results in this case:
+
+# wpa_supplicant.exe -iAtheros -c wpa_supplicant.conf -d
+
+
+Simple configuration example for WPA-PSK:
+
+#ap_scan=2
+ctrl_interface=
+network={
+ ssid="test"
+ key_mgmt=WPA-PSK
+ proto=WPA
+ pairwise=TKIP
+ psk="secret passphrase"
+}
+
+(remove '#' from the comment out ap_scan line to enable mode in which
+wpa_supplicant tries to associate with the SSID without doing
+scanning; this allows APs with hidden SSIDs to be used)
+
+
+wpa_cli.exe and wpa_gui.exe can be used to interact with the
+wpa_supplicant.exe program in the same way as with Linux. Note that
+ctrl_interface is using UNIX domain sockets when built for cygwin, but
+the native build for Windows uses named pipes and the contents of the
+ctrl_interface configuration item is used to control access to the
+interface. Anyway, this variable has to be included in the configuration
+to enable the control interface.
+
+
+Example SDDL string formats:
+
+(local admins group has permission, but nobody else):
+
+ctrl_interface=SDDL=D:(A;;GA;;;BA)
+
+("A" == "access allowed", "GA" == GENERIC_ALL == all permissions, and
+"BA" == "builtin administrators" == the local admins. The empty fields
+are for flags and object GUIDs, none of which should be required in this
+case.)
+
+(local admins and the local "power users" group have permissions,
+but nobody else):
+
+ctrl_interface=SDDL=D:(A;;GA;;;BA)(A;;GA;;;PU)
+
+(One ACCESS_ALLOWED ACE for GENERIC_ALL for builtin administrators, and
+one ACCESS_ALLOWED ACE for GENERIC_ALL for power users.)
+
+(close to wide open, but you have to be a valid user on
+the machine):
+
+ctrl_interface=SDDL=D:(A;;GA;;;AU)
+
+(One ACCESS_ALLOWED ACE for GENERIC_ALL for the "authenticated users"
+group.)
+
+This one would allow absolutely everyone (including anonymous
+users) -- this is *not* recommended, since named pipes can be attached
+to from anywhere on the network (i.e. there's no "this machine only"
+like there is with 127.0.0.1 sockets):
+
+ctrl_interface=SDDL=D:(A;;GA;;;BU)(A;;GA;;;AN)
+
+(BU == "builtin users", "AN" == "anonymous")
+
+See also [1] for the format of ACEs, and [2] for the possible strings
+that can be used for principal names.
+
+[1]
+http://msdn.microsoft.com/library/default.asp?url=/library/en-us/secauthz/security/ace_strings.asp
+[2]
+http://msdn.microsoft.com/library/default.asp?url=/library/en-us/secauthz/security/sid_strings.asp
+
+
+Starting wpa_supplicant as a Windows service (wpasvc.exe)
+---------------------------------------------------------
+
+wpa_supplicant can be started as a Windows service by using wpasvc.exe
+program that is alternative build of wpa_supplicant.exe. Most of the
+core functionality of wpasvc.exe is identical to wpa_supplicant.exe,
+but it is using Windows registry for configuration information instead
+of a text file and command line parameters. In addition, it can be
+registered as a service that can be started automatically or manually
+like any other Windows service.
+
+The root of wpa_supplicant configuration in registry is
+HKEY_LOCAL_MACHINE\SOFTWARE\wpa_supplicant. This level includes global
+parameters and a 'interfaces' subkey with all the interface configuration
+(adapter to confname mapping). Each such mapping is a subkey that has
+'adapter', 'config', and 'ctrl_interface' values.
+
+This program can be run either as a normal command line application,
+e.g., for debugging, with 'wpasvc.exe app' or as a Windows service.
+Service need to be registered with 'wpasvc.exe reg <full path to
+wpasvc.exe>'. Alternatively, 'wpasvc.exe reg' can be used to register
+the service with the current location of wpasvc.exe. After this, wpasvc
+can be started like any other Windows service (e.g., 'net start wpasvc')
+or it can be configured to start automatically through the Services tool
+in administrative tasks. The service can be unregistered with
+'wpasvc.exe unreg'.
+
+If the service is set to start during system bootup to make the
+network connection available before any user has logged in, there may
+be a long (half a minute or so) delay in starting up wpa_supplicant
+due to WinPcap needing a driver called "Network Monitor Driver" which
+is started by default on demand.
+
+To speed up wpa_supplicant start during system bootup, "Network
+Monitor Driver" can be configured to be started sooner by setting its
+startup type to System instead of the default Demand. To do this, open
+up Device Manager, select Show Hidden Devices, expand the "Non
+Plug-and-Play devices" branch, double click "Network Monitor Driver",
+go to the Driver tab, and change the Demand setting to System instead.
+
+Configuration data is in HKEY_LOCAL_MACHINE\SOFTWARE\wpa_supplicant\configs
+key. Each configuration profile has its own key under this. In terms of text
+files, each profile would map to a separate text file with possibly multiple
+networks. Under each profile, there is a networks key that lists all
+networks as a subkey. Each network has set of values in the same way as
+network block in the configuration file. In addition, blobs subkey has
+possible blobs as values.
+
+HKEY_LOCAL_MACHINE\SOFTWARE\wpa_supplicant\configs\test\networks\0000
+ ssid="example"
+ key_mgmt=WPA-PSK
+
+See win_example.reg for an example on how to setup wpasvc.exe
+parameters in registry. It can also be imported to registry as a
+starting point for the configuration.
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/android.config b/ap/app/wpa_supplicant-2.10/wpa_supplicant/android.config
new file mode 100755
index 0000000..283f8eb
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/android.config
@@ -0,0 +1,545 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# wpa_supplicant binary. All lines starting with # are ignored. Configuration
+# option lines must be commented out complete, if they are not to be included,
+# i.e., just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+#CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+#CONFIG_DRIVER_NL80211=y
+CONFIG_LIBNL20=y
+
+# QCA vendor extensions to nl80211
+CONFIG_DRIVER_NL80211_QCA=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for wired Ethernet drivers
+#CONFIG_DRIVER_WIRED=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+#CONFIG_EAP_FAST=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+CONFIG_EAP_PWD=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+CONFIG_WPS=y
+# Enable WPS external registrar functionality
+CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+#CONFIG_EAP_EKE=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+#CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+#CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# udp6 = UDP IPv6 sockets using localhost (::1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+# path is given on command line, not here; this option is just used to
+# select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operating system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+#CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+CONFIG_L2_PACKET=linux
+
+# Disable Linux packet socket workaround applicable for station interface
+# in a bridge for EAPOL frames. This should be uncommented only if the kernel
+# is known to not have the regression issue in packet socket behavior with
+# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
+#CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
+
+# Support Operating Channel Validation
+#CONFIG_OCV=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+#CONFIG_TLS=openssl
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for Binder control interface
+# Only applicable for Android platforms.
+#CONFIG_CTRL_IFACE_BINDER=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
+CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+#CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Add support for writing debug log to Android logcat instead of standard
+# output
+CONFIG_ANDROID_LOG=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+
+# Wpa_supplicant's random pool is not necessary on Android. Randomness is
+# already provided by the entropymixer service which ensures sufficient
+# entropy is maintained across reboots. Commit b410eb1913 'Initialize
+# /dev/urandom earlier in boot' seeds /dev/urandom with that entropy before
+# either wpa_supplicant or hostapd are run.
+CONFIG_NO_RANDOM_POOL=y
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+#CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+CONFIG_HS20=y
+
+# Enable interface matching in wpa_supplicant
+#CONFIG_MATCH_IFACE=y
+
+# Disable roaming in wpa_supplicant
+CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+CONFIG_AP=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+CONFIG_P2P=y
+
+# Enable TDLS support
+CONFIG_TDLS=y
+
+# Wi-Fi Display
+# This can be used to enable Wi-Fi Display extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+#CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Support Multi Band Operation
+#CONFIG_MBO=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+#CONFIG_FILS=y
+
+# Support RSN on IBSS networks
+# This is needed to be able to use mode=1 network profile with proto=RSN and
+# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
+#CONFIG_IBSS_RSN=y
+
+# External PMKSA cache control
+# This can be used to enable control interface commands that allow the current
+# PMKSA cache entries to be fetched and new entries to be added.
+#CONFIG_PMKSA_CACHE_EXTERNAL=y
+
+# Mesh Networking (IEEE 802.11s)
+#CONFIG_MESH=y
+
+# Background scanning modules
+# These can be used to request wpa_supplicant to perform background scanning
+# operations for roaming within an ESS (same SSID). See the bgscan parameter in
+# the wpa_supplicant.conf file for more details.
+# Periodic background scans based on signal strength
+#CONFIG_BGSCAN_SIMPLE=y
+# Learn channels used by the network and try to avoid bgscans on other
+# channels (experimental)
+#CONFIG_BGSCAN_LEARN=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Wired equivalent privacy (WEP)
+# WEP is an obsolete cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used for anything anymore. The
+# functionality needed to use WEP is available in the current wpa_supplicant
+# release under this optional build parameter. This functionality is subject to
+# be completely removed in a future release.
+CONFIG_WEP=y
+
+include $(wildcard $(LOCAL_PATH)/android_config_*.inc)
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/ap.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/ap.h
new file mode 100755
index 0000000..7bc1b78
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/ap.h
@@ -0,0 +1,106 @@
+/*
+ * WPA Supplicant - Basic AP mode support routines
+ * Copyright (c) 2003-2009, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2009, Atheros Communications
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef AP_H
+#define AP_H
+
+int wpa_supplicant_create_ap(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void wpa_supplicant_ap_deinit(struct wpa_supplicant *wpa_s);
+void wpa_supplicant_ap_rx_eapol(struct wpa_supplicant *wpa_s,
+ const u8 *src_addr, const u8 *buf, size_t len);
+int wpa_supplicant_ap_wps_pbc(struct wpa_supplicant *wpa_s, const u8 *bssid,
+ const u8 *p2p_dev_addr);
+int wpa_supplicant_ap_wps_pin(struct wpa_supplicant *wpa_s, const u8 *bssid,
+ const char *pin, char *buf, size_t buflen,
+ int timeout);
+int wpa_supplicant_ap_wps_cancel(struct wpa_supplicant *wpa_s);
+void wpas_wps_ap_pin_disable(struct wpa_supplicant *wpa_s);
+const char * wpas_wps_ap_pin_random(struct wpa_supplicant *wpa_s, int timeout);
+const char * wpas_wps_ap_pin_get(struct wpa_supplicant *wpa_s);
+int wpas_wps_ap_pin_set(struct wpa_supplicant *wpa_s, const char *pin,
+ int timeout);
+int ap_ctrl_iface_sta_first(struct wpa_supplicant *wpa_s,
+ char *buf, size_t buflen);
+int ap_ctrl_iface_sta(struct wpa_supplicant *wpa_s, const char *txtaddr,
+ char *buf, size_t buflen);
+int ap_ctrl_iface_sta_next(struct wpa_supplicant *wpa_s, const char *txtaddr,
+ char *buf, size_t buflen);
+int ap_ctrl_iface_sta_deauthenticate(struct wpa_supplicant *wpa_s,
+ const char *txtaddr);
+int ap_ctrl_iface_sta_disassociate(struct wpa_supplicant *wpa_s,
+ const char *txtaddr);
+int ap_ctrl_iface_wpa_get_status(struct wpa_supplicant *wpa_s, char *buf,
+ size_t buflen, int verbose);
+void ap_tx_status(void *ctx, const u8 *addr,
+ const u8 *buf, size_t len, int ack);
+void ap_eapol_tx_status(void *ctx, const u8 *dst,
+ const u8 *data, size_t len, int ack);
+void ap_client_poll_ok(void *ctx, const u8 *addr);
+void ap_rx_from_unknown_sta(void *ctx, const u8 *addr, int wds);
+void ap_mgmt_rx(void *ctx, struct rx_mgmt *rx_mgmt);
+void ap_mgmt_tx_cb(void *ctx, const u8 *buf, size_t len, u16 stype, int ok);
+int wpa_supplicant_ap_update_beacon(struct wpa_supplicant *wpa_s);
+int wpa_supplicant_ap_mac_addr_filter(struct wpa_supplicant *wpa_s,
+ const u8 *addr);
+void wpa_supplicant_ap_pwd_auth_fail(struct wpa_supplicant *wpa_s);
+int ap_switch_channel(struct wpa_supplicant *wpa_s,
+ struct csa_settings *settings);
+int ap_ctrl_iface_chanswitch(struct wpa_supplicant *wpa_s, const char *txtaddr);
+void wpas_ap_ch_switch(struct wpa_supplicant *wpa_s, int freq, int ht,
+ int offset, int width, int cf1, int cf2, int finished);
+struct wpabuf * wpas_ap_wps_nfc_config_token(struct wpa_supplicant *wpa_s,
+ int ndef);
+#ifdef CONFIG_AP
+struct wpabuf * wpas_ap_wps_nfc_handover_sel(struct wpa_supplicant *wpa_s,
+ int ndef);
+#else /* CONFIG_AP */
+static inline struct wpabuf *
+wpas_ap_wps_nfc_handover_sel(struct wpa_supplicant *wpa_s,
+ int ndef)
+{
+ return NULL;
+}
+#endif /* CONFIG_AP */
+
+int wpas_ap_wps_nfc_report_handover(struct wpa_supplicant *wpa_s,
+ const struct wpabuf *req,
+ const struct wpabuf *sel);
+int wpas_ap_wps_add_nfc_pw(struct wpa_supplicant *wpa_s, u16 pw_id,
+ const struct wpabuf *pw, const u8 *pubkey_hash);
+
+struct hostapd_config;
+int wpa_supplicant_conf_ap_ht(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid,
+ struct hostapd_config *conf);
+
+int wpas_ap_stop_ap(struct wpa_supplicant *wpa_s);
+
+int wpas_ap_pmksa_cache_list(struct wpa_supplicant *wpa_s, char *buf,
+ size_t len);
+void wpas_ap_pmksa_cache_flush(struct wpa_supplicant *wpa_s);
+int wpas_ap_pmksa_cache_list_mesh(struct wpa_supplicant *wpa_s, const u8 *addr,
+ char *buf, size_t len);
+int wpas_ap_pmksa_cache_add_external(struct wpa_supplicant *wpa_s, char *cmd);
+int wpas_ap_update_beacon(struct wpa_supplicant *wpa_s);
+
+void wpas_ap_event_dfs_radar_detected(struct wpa_supplicant *wpa_s,
+ struct dfs_event *radar);
+void wpas_ap_event_dfs_cac_started(struct wpa_supplicant *wpa_s,
+ struct dfs_event *radar);
+void wpas_ap_event_dfs_cac_finished(struct wpa_supplicant *wpa_s,
+ struct dfs_event *radar);
+void wpas_ap_event_dfs_cac_aborted(struct wpa_supplicant *wpa_s,
+ struct dfs_event *radar);
+void wpas_ap_event_dfs_cac_nop_finished(struct wpa_supplicant *wpa_s,
+ struct dfs_event *radar);
+
+void ap_periodic(struct wpa_supplicant *wpa_s);
+
+#endif /* AP_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/autoscan.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/autoscan.h
new file mode 100755
index 0000000..560684f
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/autoscan.h
@@ -0,0 +1,59 @@
+/*
+ * WPA Supplicant - auto scan
+ * Copyright (c) 2012, Intel Corporation. All rights reserved.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef AUTOSCAN_H
+#define AUTOSCAN_H
+
+struct wpa_supplicant;
+
+struct autoscan_ops {
+ const char *name;
+
+ void * (*init)(struct wpa_supplicant *wpa_s, const char *params);
+ void (*deinit)(void *priv);
+
+ int (*notify_scan)(void *priv, struct wpa_scan_results *scan_res);
+};
+
+#ifdef CONFIG_AUTOSCAN
+
+int autoscan_init(struct wpa_supplicant *wpa_s, int req_scan);
+void autoscan_deinit(struct wpa_supplicant *wpa_s);
+int autoscan_notify_scan(struct wpa_supplicant *wpa_s,
+ struct wpa_scan_results *scan_res);
+
+/* Available autoscan modules */
+
+#ifdef CONFIG_AUTOSCAN_EXPONENTIAL
+extern const struct autoscan_ops autoscan_exponential_ops;
+#endif /* CONFIG_AUTOSCAN_EXPONENTIAL */
+
+#ifdef CONFIG_AUTOSCAN_PERIODIC
+extern const struct autoscan_ops autoscan_periodic_ops;
+#endif /* CONFIG_AUTOSCAN_PERIODIC */
+
+#else /* CONFIG_AUTOSCAN */
+
+static inline int autoscan_init(struct wpa_supplicant *wpa_s, int req_scan)
+{
+ return 0;
+}
+
+static inline void autoscan_deinit(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline int autoscan_notify_scan(struct wpa_supplicant *wpa_s,
+ struct wpa_scan_results *scan_res)
+{
+ return 0;
+}
+
+#endif /* CONFIG_AUTOSCAN */
+
+#endif /* AUTOSCAN_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/bgscan.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/bgscan.h
new file mode 100755
index 0000000..3df1550
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/bgscan.h
@@ -0,0 +1,82 @@
+/*
+ * WPA Supplicant - background scan and roaming interface
+ * Copyright (c) 2009-2010, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef BGSCAN_H
+#define BGSCAN_H
+
+struct wpa_supplicant;
+struct wpa_ssid;
+
+struct bgscan_ops {
+ const char *name;
+
+ void * (*init)(struct wpa_supplicant *wpa_s, const char *params,
+ const struct wpa_ssid *ssid);
+ void (*deinit)(void *priv);
+
+ int (*notify_scan)(void *priv, struct wpa_scan_results *scan_res);
+ void (*notify_beacon_loss)(void *priv);
+ void (*notify_signal_change)(void *priv, int above,
+ int current_signal,
+ int current_noise,
+ int current_txrate);
+};
+
+#ifdef CONFIG_BGSCAN
+
+int bgscan_init(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid,
+ const char *name);
+void bgscan_deinit(struct wpa_supplicant *wpa_s);
+int bgscan_notify_scan(struct wpa_supplicant *wpa_s,
+ struct wpa_scan_results *scan_res);
+void bgscan_notify_beacon_loss(struct wpa_supplicant *wpa_s);
+void bgscan_notify_signal_change(struct wpa_supplicant *wpa_s, int above,
+ int current_signal, int current_noise,
+ int current_txrate);
+
+/* Available bgscan modules */
+
+#ifdef CONFIG_BGSCAN_SIMPLE
+extern const struct bgscan_ops bgscan_simple_ops;
+#endif /* CONFIG_BGSCAN_SIMPLE */
+#ifdef CONFIG_BGSCAN_LEARN
+extern const struct bgscan_ops bgscan_learn_ops;
+#endif /* CONFIG_BGSCAN_LEARN */
+
+#else /* CONFIG_BGSCAN */
+
+static inline int bgscan_init(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid, const char name)
+{
+ return 0;
+}
+
+static inline void bgscan_deinit(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline int bgscan_notify_scan(struct wpa_supplicant *wpa_s,
+ struct wpa_scan_results *scan_res)
+{
+ return 0;
+}
+
+static inline void bgscan_notify_beacon_loss(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline void bgscan_notify_signal_change(struct wpa_supplicant *wpa_s,
+ int above, int current_signal,
+ int current_noise,
+ int current_txrate)
+{
+}
+
+#endif /* CONFIG_BGSCAN */
+
+#endif /* BGSCAN_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/.clang-format b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/.clang-format
new file mode 100755
index 0000000..dbfdabf
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/.clang-format
@@ -0,0 +1,9 @@
+BasedOnStyle: LLVM
+IndentWidth: 8
+UseTab: Always
+BreakBeforeBraces: Mozilla
+AllowShortIfStatementsOnASingleLine: false
+IndentCaseLabels: false
+AccessModifierOffset: -8
+AlignAfterOpenBracket: AlwaysBreak
+SortIncludes: false
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder.cpp b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder.cpp
new file mode 100755
index 0000000..750e878
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder.cpp
@@ -0,0 +1,104 @@
+/*
+ * binder interface for wpa_supplicant daemon
+ * Copyright (c) 2004-2016, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2004-2016, Roshan Pius <rpius@google.com>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include <binder/IPCThreadState.h>
+#include <binder/IServiceManager.h>
+#include <binder/ProcessState.h>
+
+#include "binder_manager.h"
+
+extern "C" {
+#include "binder.h"
+#include "binder_i.h"
+#include "utils/common.h"
+#include "utils/eloop.h"
+#include "utils/includes.h"
+}
+
+void wpas_binder_sock_handler(int sock, void *eloop_ctx, void *sock_ctx)
+{
+ struct wpa_global *global = (wpa_global *)eloop_ctx;
+ struct wpas_binder_priv *priv = (wpas_binder_priv *)sock_ctx;
+
+ wpa_printf(
+ MSG_DEBUG, "Processing binder events on FD %d", priv->binder_fd);
+ android::IPCThreadState::self()->handlePolledCommands();
+}
+
+struct wpas_binder_priv *wpas_binder_init(struct wpa_global *global)
+{
+ struct wpas_binder_priv *priv;
+ wpa_supplicant_binder::BinderManager *binder_manager;
+
+ priv = (wpas_binder_priv *)os_zalloc(sizeof(*priv));
+ if (!priv)
+ return NULL;
+ priv->global = global;
+
+ android::ProcessState::self()->setThreadPoolMaxThreadCount(0);
+ android::IPCThreadState::self()->disableBackgroundScheduling(true);
+ android::IPCThreadState::self()->setupPolling(&priv->binder_fd);
+ wpa_printf(MSG_INFO, "Process binder events on FD %d", priv->binder_fd);
+ if (priv->binder_fd < 0)
+ goto err;
+ /* Look for read events from the binder socket in the eloop. */
+ if (eloop_register_read_sock(
+ priv->binder_fd, wpas_binder_sock_handler, global, priv) < 0)
+ goto err;
+
+ binder_manager = wpa_supplicant_binder::BinderManager::getInstance();
+ if (!binder_manager)
+ goto err;
+ binder_manager->registerBinderService(global);
+ /* We may not need to store this binder manager reference in the
+ * global data strucure because we've made it a singleton class. */
+ priv->binder_manager = (void *)binder_manager;
+
+ return priv;
+
+err:
+ wpas_binder_deinit(priv);
+ return NULL;
+}
+
+void wpas_binder_deinit(struct wpas_binder_priv *priv)
+{
+ if (!priv)
+ return;
+
+ wpa_supplicant_binder::BinderManager::destroyInstance();
+ eloop_unregister_read_sock(priv->binder_fd);
+ android::IPCThreadState::shutdown();
+}
+
+int wpas_binder_register_interface(struct wpa_supplicant *wpa_s)
+{
+ if (!wpa_s->global->binder)
+ return 1;
+
+ wpa_supplicant_binder::BinderManager *binder_manager =
+ wpa_supplicant_binder::BinderManager::getInstance();
+ if (!binder_manager)
+ return 1;
+
+ return binder_manager->registerInterface(wpa_s);
+}
+
+int wpas_binder_unregister_interface(struct wpa_supplicant *wpa_s)
+{
+ if (!wpa_s->global->binder)
+ return 1;
+
+ wpa_supplicant_binder::BinderManager *binder_manager =
+ wpa_supplicant_binder::BinderManager::getInstance();
+ if (!binder_manager)
+ return 1;
+
+ return binder_manager->unregisterInterface(wpa_s);
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder.h
new file mode 100755
index 0000000..6d7abb1
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder.h
@@ -0,0 +1,46 @@
+/*
+ * binder interface for wpa_supplicant daemon
+ * Copyright (c) 2004-2016, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2004-2016, Roshan Pius <rpius@google.com>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPA_SUPPLICANT_BINDER_BINDER_H
+#define WPA_SUPPLICANT_BINDER_BINDER_H
+
+#ifdef _cplusplus
+extern "C" {
+#endif /* _cplusplus */
+
+/**
+ * This is the binder RPC interface entry point to the wpa_supplicant core.
+ * This initializes the binder driver & BinderManager instance and then forwards
+ * all the notifications from the supplicant core to the BinderManager.
+ */
+struct wpas_binder_priv;
+struct wpa_global;
+
+struct wpas_binder_priv *wpas_binder_init(struct wpa_global *global);
+void wpas_binder_deinit(struct wpas_binder_priv *priv);
+
+#ifdef CONFIG_CTRL_IFACE_BINDER
+int wpas_binder_register_interface(struct wpa_supplicant *wpa_s);
+int wpas_binder_unregister_interface(struct wpa_supplicant *wpa_s);
+#else /* CONFIG_CTRL_IFACE_BINDER */
+static inline int wpas_binder_register_interface(struct wpa_supplicant *wpa_s)
+{
+ return 0;
+}
+static inline int wpas_binder_unregister_interface(struct wpa_supplicant *wpa_s)
+{
+ return 0;
+}
+#endif /* CONFIG_CTRL_IFACE_BINDER */
+
+#ifdef _cplusplus
+}
+#endif /* _cplusplus */
+
+#endif /* WPA_SUPPLICANT_BINDER_BINDER_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder_constants.cpp b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder_constants.cpp
new file mode 100755
index 0000000..0d452b1
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder_constants.cpp
@@ -0,0 +1,18 @@
+/*
+ * binder interface for wpa_supplicant daemon
+ * Copyright (c) 2004-2016, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2004-2016, Roshan Pius <rpius@google.com>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include "binder_constants.h"
+
+namespace wpa_supplicant_binder {
+namespace binder_constants {
+
+const char kServiceName[] = "wpa_supplicant";
+
+} /* namespace binder_constants */
+} /* namespace wpa_supplicant_binder */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder_constants.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder_constants.h
new file mode 100755
index 0000000..a4d9b55
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder_constants.h
@@ -0,0 +1,21 @@
+/*
+ * binder interface for wpa_supplicant daemon
+ * Copyright (c) 2004-2016, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2004-2016, Roshan Pius <rpius@google.com>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPA_SUPPLICANT_BINDER_BINDER_CONSTANTS_H
+#define WPA_SUPPLICANT_BINDER_BINDER_CONSTANTS_H
+
+namespace wpa_supplicant_binder {
+namespace binder_constants {
+
+extern const char kServiceName[];
+
+} /* namespace binder_constants */
+} /* namespace wpa_supplicant_binder */
+
+#endif /* WPA_SUPPLICANT_BINDER_BINDER_CONSTANTS_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder_i.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder_i.h
new file mode 100755
index 0000000..5140d6d
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder_i.h
@@ -0,0 +1,28 @@
+/*
+ * binder interface for wpa_supplicant daemon
+ * Copyright (c) 2004-2016, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2004-2016, Roshan Pius <rpius@google.com>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef BINDER_I_H
+#define BINDER_I_H
+
+#ifdef _cplusplus
+extern "C" {
+#endif // _cplusplus
+
+struct wpas_binder_priv
+{
+ int binder_fd;
+ struct wpa_global *global;
+ void *binder_manager;
+};
+
+#ifdef _cplusplus
+}
+#endif /* _cplusplus */
+
+#endif /* BINDER_I_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder_manager.cpp b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder_manager.cpp
new file mode 100755
index 0000000..27e8ded
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder_manager.cpp
@@ -0,0 +1,100 @@
+/*
+ * binder interface for wpa_supplicant daemon
+ * Copyright (c) 2004-2016, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2004-2016, Roshan Pius <rpius@google.com>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include <binder/IServiceManager.h>
+
+#include "binder_constants.h"
+#include "binder_manager.h"
+
+extern "C" {
+#include "utils/common.h"
+#include "utils/includes.h"
+}
+
+namespace wpa_supplicant_binder {
+
+BinderManager *BinderManager::instance_ = NULL;
+
+BinderManager *BinderManager::getInstance()
+{
+ if (!instance_)
+ instance_ = new BinderManager();
+ return instance_;
+}
+
+void BinderManager::destroyInstance()
+{
+ if (instance_)
+ delete instance_;
+ instance_ = NULL;
+}
+
+int BinderManager::registerBinderService(struct wpa_global *global)
+{
+ /* Create the main binder service object and register with
+ * system service manager. */
+ supplicant_object_ = new Supplicant(global);
+ android::String16 service_name(binder_constants::kServiceName);
+ android::defaultServiceManager()->addService(
+ service_name, android::IInterface::asBinder(supplicant_object_));
+ return 0;
+}
+
+int BinderManager::registerInterface(struct wpa_supplicant *wpa_s)
+{
+ if (!wpa_s)
+ return 1;
+
+ /* Using the corresponding wpa_supplicant pointer as key to our
+ * object map. */
+ const void *iface_key = wpa_s;
+
+ /* Return failure if we already have an object for that iface_key. */
+ if (iface_object_map_.find(iface_key) != iface_object_map_.end())
+ return 1;
+
+ iface_object_map_[iface_key] = new Iface(wpa_s);
+ if (!iface_object_map_[iface_key].get())
+ return 1;
+
+ wpa_s->binder_object_key = iface_key;
+
+ return 0;
+}
+
+int BinderManager::unregisterInterface(struct wpa_supplicant *wpa_s)
+{
+ if (!wpa_s || !wpa_s->binder_object_key)
+ return 1;
+
+ const void *iface_key = wpa_s;
+ if (iface_object_map_.find(iface_key) == iface_object_map_.end())
+ return 1;
+
+ /* Delete the corresponding iface object from our map. */
+ iface_object_map_.erase(iface_key);
+ wpa_s->binder_object_key = NULL;
+ return 0;
+}
+
+int BinderManager::getIfaceBinderObjectByKey(
+ const void *iface_object_key,
+ android::sp<fi::w1::wpa_supplicant::IIface> *iface_object)
+{
+ if (!iface_object_key || !iface_object)
+ return 1;
+
+ if (iface_object_map_.find(iface_object_key) == iface_object_map_.end())
+ return 1;
+
+ *iface_object = iface_object_map_[iface_object_key];
+ return 0;
+}
+
+} /* namespace wpa_supplicant_binder */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder_manager.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder_manager.h
new file mode 100755
index 0000000..d8b7dd0
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/binder_manager.h
@@ -0,0 +1,58 @@
+/*
+ * binder interface for wpa_supplicant daemon
+ * Copyright (c) 2004-2016, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2004-2016, Roshan Pius <rpius@google.com>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPA_SUPPLICANT_BINDER_BINDER_MANAGER_H
+#define WPA_SUPPLICANT_BINDER_BINDER_MANAGER_H
+
+#include <map>
+#include <string>
+
+#include "iface.h"
+#include "supplicant.h"
+
+struct wpa_global;
+struct wpa_supplicant;
+
+namespace wpa_supplicant_binder {
+
+/**
+ * BinderManager is responsible for managing the lifetime of all
+ * binder objects created by wpa_supplicant. This is a singleton
+ * class which is created by the supplicant core and can be used
+ * to get references to the binder objects.
+ */
+class BinderManager
+{
+public:
+ static BinderManager *getInstance();
+ static void destroyInstance();
+ int registerBinderService(struct wpa_global *global);
+ int registerInterface(struct wpa_supplicant *wpa_s);
+ int unregisterInterface(struct wpa_supplicant *wpa_s);
+ int getIfaceBinderObjectByKey(
+ const void *iface_object_key,
+ android::sp<fi::w1::wpa_supplicant::IIface> *iface_object);
+
+private:
+ BinderManager() = default;
+ ~BinderManager() = default;
+
+ /* Singleton instance of this class. */
+ static BinderManager *instance_;
+ /* The main binder service object. */
+ android::sp<Supplicant> supplicant_object_;
+ /* Map of all the interface specific binder objects controlled by
+ * wpa_supplicant. This map is keyed in by the corresponding
+ * wpa_supplicant structure pointer. */
+ std::map<const void *, android::sp<Iface>> iface_object_map_;
+};
+
+} /* namespace wpa_supplicant_binder */
+
+#endif /* WPA_SUPPLICANT_BINDER_BINDER_MANAGER_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/iface.cpp b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/iface.cpp
new file mode 100755
index 0000000..c61b3b0
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/iface.cpp
@@ -0,0 +1,16 @@
+/*
+ * binder interface for wpa_supplicant daemon
+ * Copyright (c) 2004-2016, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2004-2016, Roshan Pius <rpius@google.com>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include "iface.h"
+
+namespace wpa_supplicant_binder {
+
+Iface::Iface(struct wpa_supplicant *wpa_s) : wpa_s_(wpa_s) {}
+
+} /* namespace wpa_supplicant_binder */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/iface.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/iface.h
new file mode 100755
index 0000000..c0ee12c
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/iface.h
@@ -0,0 +1,42 @@
+/*
+ * binder interface for wpa_supplicant daemon
+ * Copyright (c) 2004-2016, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2004-2016, Roshan Pius <rpius@google.com>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPA_SUPPLICANT_BINDER_IFACE_H
+#define WPA_SUPPLICANT_BINDER_IFACE_H
+
+#include "fi/w1/wpa_supplicant/BnIface.h"
+
+extern "C" {
+#include "utils/common.h"
+#include "utils/includes.h"
+#include "../wpa_supplicant_i.h"
+}
+
+namespace wpa_supplicant_binder {
+
+/**
+ * Implementation of Iface binder object. Each unique binder
+ * object is used for control operations on a specific interface
+ * controlled by wpa_supplicant.
+ */
+class Iface : public fi::w1::wpa_supplicant::BnIface
+{
+public:
+ Iface(struct wpa_supplicant *wpa_s);
+ virtual ~Iface() = default;
+
+private:
+ /* Raw pointer to the structure maintained by the core for this
+ * interface. */
+ struct wpa_supplicant *wpa_s_;
+};
+
+} /* namespace wpa_supplicant_binder */
+
+#endif /* WPA_SUPPLICANT_BINDER_IFACE_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/supplicant.cpp b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/supplicant.cpp
new file mode 100755
index 0000000..76569b1
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/supplicant.cpp
@@ -0,0 +1,127 @@
+/*
+ * binder interface for wpa_supplicant daemon
+ * Copyright (c) 2004-2016, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2004-2016, Roshan Pius <rpius@google.com>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include "supplicant.h"
+#include "binder_manager.h"
+
+namespace wpa_supplicant_binder {
+
+Supplicant::Supplicant(struct wpa_global *global) : wpa_global_(global) {}
+
+android::binder::Status Supplicant::CreateInterface(
+ const android::os::PersistableBundle ¶ms,
+ android::sp<fi::w1::wpa_supplicant::IIface> *aidl_return)
+{
+ android::String16 driver, ifname, confname, bridge_ifname;
+
+ /* Check if required Ifname argument is missing */
+ if (!params.getString(android::String16("Ifname"), &ifname))
+ return android::binder::Status::fromServiceSpecificError(
+ ERROR_INVALID_ARGS,
+ android::String8("Ifname missing in params."));
+ /* Retrieve the remaining params from the dictionary */
+ params.getString(android::String16("Driver"), &driver);
+ params.getString(android::String16("ConfigFile"), &confname);
+ params.getString(android::String16("BridgeIfname"), &bridge_ifname);
+
+ /*
+ * Try to get the wpa_supplicant record for this iface, return
+ * an error if we already control it.
+ */
+ if (wpa_supplicant_get_iface(
+ wpa_global_, android::String8(ifname).string()) != NULL)
+ return android::binder::Status::fromServiceSpecificError(
+ ERROR_IFACE_EXISTS,
+ android::String8("wpa_supplicant already controls this "
+ "interface."));
+
+ android::binder::Status status;
+ struct wpa_supplicant *wpa_s = NULL;
+ struct wpa_interface iface;
+
+ os_memset(&iface, 0, sizeof(iface));
+ iface.driver = os_strdup(android::String8(driver).string());
+ iface.ifname = os_strdup(android::String8(ifname).string());
+ iface.confname = os_strdup(android::String8(confname).string());
+ iface.bridge_ifname =
+ os_strdup(android::String8(bridge_ifname).string());
+ /* Otherwise, have wpa_supplicant attach to it. */
+ wpa_s = wpa_supplicant_add_iface(wpa_global_, &iface, NULL);
+ /* The supplicant core creates a corresponding binder object via
+ * BinderManager when |wpa_supplicant_add_iface| is called. */
+ if (!wpa_s || !wpa_s->binder_object_key) {
+ status = android::binder::Status::fromServiceSpecificError(
+ ERROR_UNKNOWN,
+ android::String8(
+ "wpa_supplicant couldn't grab this interface."));
+ } else {
+ BinderManager *binder_manager = BinderManager::getInstance();
+
+ if (!binder_manager ||
+ binder_manager->getIfaceBinderObjectByKey(
+ wpa_s->binder_object_key, aidl_return))
+ status =
+ android::binder::Status::fromServiceSpecificError(
+ ERROR_UNKNOWN,
+ android::String8("wpa_supplicant encountered a "
+ "binder error."));
+ else
+ status = android::binder::Status::ok();
+ }
+ os_free((void *)iface.driver);
+ os_free((void *)iface.ifname);
+ os_free((void *)iface.confname);
+ os_free((void *)iface.bridge_ifname);
+ return status;
+}
+
+android::binder::Status Supplicant::RemoveInterface(const std::string &ifname)
+{
+ struct wpa_supplicant *wpa_s;
+
+ wpa_s = wpa_supplicant_get_iface(wpa_global_, ifname.c_str());
+ if (!wpa_s || !wpa_s->binder_object_key)
+ return android::binder::Status::fromServiceSpecificError(
+ ERROR_IFACE_UNKNOWN,
+ android::String8("wpa_supplicant does not control this "
+ "interface."));
+ if (wpa_supplicant_remove_iface(wpa_global_, wpa_s, 0))
+ return android::binder::Status::fromServiceSpecificError(
+ ERROR_UNKNOWN,
+ android::String8(
+ "wpa_supplicant couldn't remove this interface."));
+ return android::binder::Status::ok();
+}
+
+android::binder::Status Supplicant::GetInterface(
+ const std::string &ifname,
+ android::sp<fi::w1::wpa_supplicant::IIface> *aidl_return)
+{
+ struct wpa_supplicant *wpa_s;
+
+ wpa_s = wpa_supplicant_get_iface(wpa_global_, ifname.c_str());
+ if (!wpa_s || !wpa_s->binder_object_key)
+ return android::binder::Status::fromServiceSpecificError(
+ ERROR_IFACE_UNKNOWN,
+ android::String8(
+ "wpa_supplicant does not control this interface."));
+
+ BinderManager *binder_manager = BinderManager::getInstance();
+ if (!binder_manager ||
+ binder_manager->getIfaceBinderObjectByKey(
+ wpa_s->binder_object_key, aidl_return))
+ return android::binder::Status::fromServiceSpecificError(
+ ERROR_UNKNOWN,
+ android::String8(
+ "wpa_supplicant encountered a binder error."));
+
+ return android::binder::Status::ok();
+}
+
+} /* namespace wpa_supplicant_binder */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/supplicant.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/supplicant.h
new file mode 100755
index 0000000..136b99b
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/binder/supplicant.h
@@ -0,0 +1,55 @@
+/*
+ * binder interface for wpa_supplicant daemon
+ * Copyright (c) 2004-2016, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2004-2016, Roshan Pius <rpius@google.com>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPA_SUPPLICANT_BINDER_SUPPLICANT_H
+#define WPA_SUPPLICANT_BINDER_SUPPLICANT_H
+
+#include "fi/w1/wpa_supplicant/BnSupplicant.h"
+#include "fi/w1/wpa_supplicant/IIface.h"
+#include "fi/w1/wpa_supplicant/ISupplicantCallbacks.h"
+
+extern "C" {
+#include "utils/common.h"
+#include "utils/includes.h"
+#include "../wpa_supplicant_i.h"
+}
+
+namespace wpa_supplicant_binder {
+
+/**
+ * Implementation of the supplicant binder object. This binder
+ * object is used core for global control operations on
+ * wpa_supplicant.
+ */
+class Supplicant : public fi::w1::wpa_supplicant::BnSupplicant
+{
+public:
+ Supplicant(struct wpa_global *global);
+ virtual ~Supplicant() = default;
+
+ android::binder::Status CreateInterface(
+ const android::os::PersistableBundle ¶ms,
+ android::sp<fi::w1::wpa_supplicant::IIface> *aidl_return) override;
+ android::binder::Status
+ RemoveInterface(const std::string &ifname) override;
+ android::binder::Status GetInterface(
+ const std::string &ifname,
+ android::sp<fi::w1::wpa_supplicant::IIface> *aidl_return) override;
+
+private:
+ /* Raw pointer to the global structure maintained by the core. */
+ struct wpa_global *wpa_global_;
+ /* All the callback objects registered by the clients. */
+ std::vector<android::sp<fi::w1::wpa_supplicant::ISupplicantCallbacks>>
+ callbacks_;
+};
+
+} /* namespace wpa_supplicant_binder */
+
+#endif /* WPA_SUPPLICANT_BINDER_SUPPLICANT_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/bss.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/bss.h
new file mode 100755
index 0000000..4078b9b
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/bss.h
@@ -0,0 +1,200 @@
+/*
+ * BSS table
+ * Copyright (c) 2009-2019, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef BSS_H
+#define BSS_H
+
+struct wpa_scan_res;
+
+#define WPA_BSS_QUAL_INVALID BIT(0)
+#define WPA_BSS_NOISE_INVALID BIT(1)
+#define WPA_BSS_LEVEL_INVALID BIT(2)
+#define WPA_BSS_LEVEL_DBM BIT(3)
+#define WPA_BSS_AUTHENTICATED BIT(4)
+#define WPA_BSS_ASSOCIATED BIT(5)
+#define WPA_BSS_ANQP_FETCH_TRIED BIT(6)
+#define WPA_BSS_OWE_TRANSITION BIT(7)
+
+#define WPA_BSS_FREQ_CHANGED_FLAG BIT(0)
+#define WPA_BSS_SIGNAL_CHANGED_FLAG BIT(1)
+#define WPA_BSS_PRIVACY_CHANGED_FLAG BIT(2)
+#define WPA_BSS_MODE_CHANGED_FLAG BIT(3)
+#define WPA_BSS_WPAIE_CHANGED_FLAG BIT(4)
+#define WPA_BSS_RSNIE_CHANGED_FLAG BIT(5)
+#define WPA_BSS_WPS_CHANGED_FLAG BIT(6)
+#define WPA_BSS_RATES_CHANGED_FLAG BIT(7)
+#define WPA_BSS_IES_CHANGED_FLAG BIT(8)
+
+struct wpa_bss_anqp_elem {
+ struct dl_list list;
+ u16 infoid;
+ bool protected_response; /* received in a protected GAS response */
+ struct wpabuf *payload;
+};
+
+/**
+ * struct wpa_bss_anqp - ANQP data for a BSS entry (struct wpa_bss)
+ */
+struct wpa_bss_anqp {
+ /** Number of BSS entries referring to this ANQP data instance */
+ unsigned int users;
+#ifdef CONFIG_INTERWORKING
+ struct wpabuf *capability_list;
+ struct wpabuf *venue_name;
+ struct wpabuf *network_auth_type;
+ struct wpabuf *roaming_consortium;
+ struct wpabuf *ip_addr_type_availability;
+ struct wpabuf *nai_realm;
+ struct wpabuf *anqp_3gpp;
+ struct wpabuf *domain_name;
+ struct wpabuf *fils_realm_info;
+ struct dl_list anqp_elems; /* list of struct wpa_bss_anqp_elem */
+#endif /* CONFIG_INTERWORKING */
+#ifdef CONFIG_HS20
+ struct wpabuf *hs20_capability_list;
+ struct wpabuf *hs20_operator_friendly_name;
+ struct wpabuf *hs20_wan_metrics;
+ struct wpabuf *hs20_connection_capability;
+ struct wpabuf *hs20_operating_class;
+ struct wpabuf *hs20_osu_providers_list;
+ struct wpabuf *hs20_operator_icon_metadata;
+ struct wpabuf *hs20_osu_providers_nai_list;
+#endif /* CONFIG_HS20 */
+};
+
+/**
+ * struct wpa_bss - BSS table
+ *
+ * This structure is used to store information about neighboring BSSes in
+ * generic format. It is mainly updated based on scan results from the driver.
+ */
+struct wpa_bss {
+ /** List entry for struct wpa_supplicant::bss */
+ struct dl_list list;
+ /** List entry for struct wpa_supplicant::bss_id */
+ struct dl_list list_id;
+ /** Unique identifier for this BSS entry */
+ unsigned int id;
+ /** Number of counts without seeing this BSS */
+ unsigned int scan_miss_count;
+ /** Index of the last scan update */
+ unsigned int last_update_idx;
+ /** Information flags about the BSS/IBSS (WPA_BSS_*) */
+ unsigned int flags;
+ /** BSSID */
+ u8 bssid[ETH_ALEN];
+ /** HESSID */
+ u8 hessid[ETH_ALEN];
+ /** SSID */
+ u8 ssid[SSID_MAX_LEN];
+ /** Length of SSID */
+ size_t ssid_len;
+ /** Frequency of the channel in MHz (e.g., 2412 = channel 1) */
+ int freq;
+ /** Beacon interval in TUs (host byte order) */
+ u16 beacon_int;
+ /** Capability information field in host byte order */
+ u16 caps;
+ /** Signal quality */
+ int qual;
+ /** Noise level */
+ int noise;
+ /** Signal level */
+ int level;
+ /** Timestamp of last Beacon/Probe Response frame */
+ u64 tsf;
+ /** Time of the last update (i.e., Beacon or Probe Response RX) */
+ struct os_reltime last_update;
+ /** Estimated throughput in kbps */
+ unsigned int est_throughput;
+ /** Signal-to-noise ratio in dB */
+ int snr;
+ /** ANQP data */
+ struct wpa_bss_anqp *anqp;
+ /** Length of the following IE field in octets (from Probe Response) */
+ size_t ie_len;
+ /** Length of the following Beacon IE field in octets */
+ size_t beacon_ie_len;
+ /* followed by ie_len octets of IEs */
+ /* followed by beacon_ie_len octets of IEs */
+ u8 ies[];
+};
+
+static inline const u8 * wpa_bss_ie_ptr(const struct wpa_bss *bss)
+{
+ return bss->ies;
+}
+
+void notify_bss_changes(struct wpa_supplicant *wpa_s, u32 changes,
+ const struct wpa_bss *bss);
+void wpa_bss_update_start(struct wpa_supplicant *wpa_s);
+void wpa_bss_update_scan_res(struct wpa_supplicant *wpa_s,
+ struct wpa_scan_res *res,
+ struct os_reltime *fetch_time);
+void wpa_bss_remove(struct wpa_supplicant *wpa_s, struct wpa_bss *bss,
+ const char *reason);
+void wpa_bss_update_end(struct wpa_supplicant *wpa_s, struct scan_info *info,
+ int new_scan);
+int wpa_bss_init(struct wpa_supplicant *wpa_s);
+void wpa_bss_deinit(struct wpa_supplicant *wpa_s);
+void wpa_bss_flush(struct wpa_supplicant *wpa_s);
+void wpa_bss_flush_by_age(struct wpa_supplicant *wpa_s, int age);
+struct wpa_bss * wpa_bss_get(struct wpa_supplicant *wpa_s, const u8 *bssid,
+ const u8 *ssid, size_t ssid_len);
+struct wpa_bss * wpa_bss_get_bssid(struct wpa_supplicant *wpa_s,
+ const u8 *bssid);
+struct wpa_bss * wpa_bss_get_bssid_latest(struct wpa_supplicant *wpa_s,
+ const u8 *bssid);
+struct wpa_bss * wpa_bss_get_p2p_dev_addr(struct wpa_supplicant *wpa_s,
+ const u8 *dev_addr);
+struct wpa_bss * wpa_bss_get_id(struct wpa_supplicant *wpa_s, unsigned int id);
+struct wpa_bss * wpa_bss_get_id_range(struct wpa_supplicant *wpa_s,
+ unsigned int idf, unsigned int idl);
+const u8 * wpa_bss_get_ie(const struct wpa_bss *bss, u8 ie);
+const u8 * wpa_bss_get_ie_ext(const struct wpa_bss *bss, u8 ext);
+const u8 * wpa_bss_get_vendor_ie(const struct wpa_bss *bss, u32 vendor_type);
+const u8 * wpa_bss_get_vendor_ie_beacon(const struct wpa_bss *bss,
+ u32 vendor_type);
+struct wpabuf * wpa_bss_get_vendor_ie_multi(const struct wpa_bss *bss,
+ u32 vendor_type);
+struct wpabuf * wpa_bss_get_vendor_ie_multi_beacon(const struct wpa_bss *bss,
+ u32 vendor_type);
+int wpa_bss_get_max_rate(const struct wpa_bss *bss);
+int wpa_bss_get_bit_rates(const struct wpa_bss *bss, u8 **rates);
+struct wpa_bss_anqp * wpa_bss_anqp_alloc(void);
+int wpa_bss_anqp_unshare_alloc(struct wpa_bss *bss);
+const u8 * wpa_bss_get_fils_cache_id(const struct wpa_bss *bss);
+int wpa_bss_ext_capab(const struct wpa_bss *bss, unsigned int capab);
+
+static inline int bss_is_dmg(const struct wpa_bss *bss)
+{
+ return bss->freq > 45000;
+}
+
+/**
+ * Test whether a BSS is a PBSS.
+ * This checks whether a BSS is a DMG-band PBSS. PBSS is used for P2P DMG
+ * network.
+ */
+static inline int bss_is_pbss(struct wpa_bss *bss)
+{
+ return bss_is_dmg(bss) &&
+ (bss->caps & IEEE80211_CAP_DMG_MASK) == IEEE80211_CAP_DMG_PBSS;
+}
+
+static inline void wpa_bss_update_level(struct wpa_bss *bss, int new_level)
+{
+ if (bss != NULL && new_level > -WPA_INVALID_NOISE && new_level < 0)
+ bss->level = new_level;
+}
+
+void calculate_update_time(const struct os_reltime *fetch_time,
+ unsigned int age_ms,
+ struct os_reltime *update_time);
+
+#endif /* BSS_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/bssid_ignore.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/bssid_ignore.h
new file mode 100755
index 0000000..721b0e1
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/bssid_ignore.h
@@ -0,0 +1,33 @@
+/*
+ * wpa_supplicant - List of temporarily ignored BSSIDs
+ * Copyright (c) 2003-2021, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef BSSID_IGNORE_H
+#define BSSID_IGNORE_H
+
+struct wpa_bssid_ignore {
+ struct wpa_bssid_ignore *next;
+ u8 bssid[ETH_ALEN];
+ int count;
+ /* Time of the most recent trigger to ignore this BSSID. */
+ struct os_reltime start;
+ /*
+ * Number of seconds after start that the entey will be considered
+ * valid.
+ */
+ int timeout_secs;
+};
+
+struct wpa_bssid_ignore * wpa_bssid_ignore_get(struct wpa_supplicant *wpa_s,
+ const u8 *bssid);
+int wpa_bssid_ignore_add(struct wpa_supplicant *wpa_s, const u8 *bssid);
+int wpa_bssid_ignore_del(struct wpa_supplicant *wpa_s, const u8 *bssid);
+int wpa_bssid_ignore_is_listed(struct wpa_supplicant *wpa_s, const u8 *bssid);
+void wpa_bssid_ignore_clear(struct wpa_supplicant *wpa_s);
+void wpa_bssid_ignore_update(struct wpa_supplicant *wpa_s);
+
+#endif /* BSSID_IGNORE_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/config.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/config.h
new file mode 100755
index 0000000..d22ef05
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/config.h
@@ -0,0 +1,1797 @@
+/*
+ * WPA Supplicant / Configuration file structures
+ * Copyright (c) 2003-2012, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define DEFAULT_EAPOL_VERSION 1
+#ifdef CONFIG_NO_SCAN_PROCESSING
+#define DEFAULT_AP_SCAN 2
+#else /* CONFIG_NO_SCAN_PROCESSING */
+#define DEFAULT_AP_SCAN 1
+#endif /* CONFIG_NO_SCAN_PROCESSING */
+#define DEFAULT_USER_MPM 1
+#define DEFAULT_MAX_PEER_LINKS 99
+#define DEFAULT_MESH_MAX_INACTIVITY 300
+#define DEFAULT_MESH_FWDING 1
+/*
+ * The default dot11RSNASAERetransPeriod is defined as 40 ms in the standard,
+ * but use 1000 ms in practice to avoid issues on low power CPUs.
+ */
+#define DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD 1000
+#define DEFAULT_FAST_REAUTH 1
+#define DEFAULT_P2P_GO_INTENT 7
+#define DEFAULT_P2P_INTRA_BSS 1
+#define DEFAULT_P2P_GO_MAX_INACTIVITY (5 * 60)
+#define DEFAULT_P2P_OPTIMIZE_LISTEN_CHAN 0
+#define DEFAULT_BSS_MAX_COUNT 200
+#define DEFAULT_BSS_EXPIRATION_AGE 180
+#define DEFAULT_BSS_EXPIRATION_SCAN_COUNT 2
+#define DEFAULT_MAX_NUM_STA 128
+#define DEFAULT_AP_ISOLATE 0
+#define DEFAULT_ACCESS_NETWORK_TYPE 15
+#define DEFAULT_SCAN_CUR_FREQ 0
+#define DEFAULT_P2P_SEARCH_DELAY 500
+#define DEFAULT_RAND_ADDR_LIFETIME 60
+#define DEFAULT_KEY_MGMT_OFFLOAD 1
+#define DEFAULT_CERT_IN_CB 1
+#define DEFAULT_P2P_GO_CTWINDOW 0
+#define DEFAULT_WPA_RSC_RELAXATION 1
+#define DEFAULT_MBO_CELL_CAPA MBO_CELL_CAPA_NOT_SUPPORTED
+#define DEFAULT_DISASSOC_IMMINENT_RSSI_THRESHOLD -75
+#define DEFAULT_OCE_SUPPORT OCE_STA
+#define DEFAULT_EXTENDED_KEY_ID 0
+#define DEFAULT_SCAN_RES_VALID_FOR_CONNECT 5
+
+#include "config_ssid.h"
+#include "wps/wps.h"
+#include "common/ieee802_11_defs.h"
+#include "common/ieee802_11_common.h"
+
+
+#define MAX_ROAMING_CONS 36
+#define MAX_ROAMING_CONS_OI_LEN 15
+
+struct wpa_cred {
+ /**
+ * next - Next credential in the list
+ *
+ * This pointer can be used to iterate over all credentials. The head
+ * of this list is stored in the cred field of struct wpa_config.
+ */
+ struct wpa_cred *next;
+
+ /**
+ * id - Unique id for the credential
+ *
+ * This identifier is used as a unique identifier for each credential
+ * block when using the control interface. Each credential is allocated
+ * an id when it is being created, either when reading the
+ * configuration file or when a new credential is added through the
+ * control interface.
+ */
+ int id;
+
+ /**
+ * temporary - Whether this credential is temporary and not to be saved
+ */
+ int temporary;
+
+ /**
+ * priority - Priority group
+ *
+ * By default, all networks and credentials get the same priority group
+ * (0). This field can be used to give higher priority for credentials
+ * (and similarly in struct wpa_ssid for network blocks) to change the
+ * Interworking automatic networking selection behavior. The matching
+ * network (based on either an enabled network block or a credential)
+ * with the highest priority value will be selected.
+ */
+ int priority;
+
+ /**
+ * pcsc - Use PC/SC and SIM/USIM card
+ */
+ int pcsc;
+
+ /**
+ * realm - Home Realm for Interworking
+ */
+ char *realm;
+
+ /**
+ * username - Username for Interworking network selection
+ */
+ char *username;
+
+ /**
+ * password - Password for Interworking network selection
+ */
+ char *password;
+
+ /**
+ * ext_password - Whether password is a name for external storage
+ */
+ int ext_password;
+
+ /**
+ * ca_cert - CA certificate for Interworking network selection
+ */
+ char *ca_cert;
+
+ /**
+ * client_cert - File path to client certificate file (PEM/DER)
+ *
+ * This field is used with Interworking networking selection for a case
+ * where client certificate/private key is used for authentication
+ * (EAP-TLS). Full path to the file should be used since working
+ * directory may change when wpa_supplicant is run in the background.
+ *
+ * Alternatively, a named configuration blob can be used by setting
+ * this to blob://blob_name.
+ */
+ char *client_cert;
+
+ /**
+ * private_key - File path to client private key file (PEM/DER/PFX)
+ *
+ * When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
+ * commented out. Both the private key and certificate will be read
+ * from the PKCS#12 file in this case. Full path to the file should be
+ * used since working directory may change when wpa_supplicant is run
+ * in the background.
+ *
+ * Windows certificate store can be used by leaving client_cert out and
+ * configuring private_key in one of the following formats:
+ *
+ * cert://substring_to_match
+ *
+ * hash://certificate_thumbprint_in_hex
+ *
+ * For example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
+ *
+ * Note that when running wpa_supplicant as an application, the user
+ * certificate store (My user account) is used, whereas computer store
+ * (Computer account) is used when running wpasvc as a service.
+ *
+ * Alternatively, a named configuration blob can be used by setting
+ * this to blob://blob_name.
+ */
+ char *private_key;
+
+ /**
+ * private_key_passwd - Password for private key file
+ */
+ char *private_key_passwd;
+
+ /**
+ * imsi - IMSI in <MCC> | <MNC> | '-' | <MSIN> format
+ */
+ char *imsi;
+
+ /**
+ * milenage - Milenage parameters for SIM/USIM simulator in
+ * <Ki>:<OPc>:<SQN> format
+ */
+ char *milenage;
+
+ /**
+ * engine - Use an engine for private key operations
+ */
+ int engine;
+
+ /**
+ * engine_id - String identifying the engine to use
+ */
+ char *engine_id;
+
+ /**
+ * ca_cert_id - The CA certificate identifier when using an engine
+ */
+ char *ca_cert_id;
+
+ /**
+ * cert_id - The certificate identifier when using an engine
+ */
+ char *cert_id;
+
+ /**
+ * key_id - The private key identifier when using an engine
+ */
+ char *key_id;
+
+ /**
+ * domain_suffix_match - Constraint for server domain name
+ *
+ * If set, this FQDN is used as a suffix match requirement for the AAA
+ * server certificate in SubjectAltName dNSName element(s). If a
+ * matching dNSName is found, this constraint is met. If no dNSName
+ * values are present, this constraint is matched against SubjectName CN
+ * using same suffix match comparison. Suffix match here means that the
+ * host/domain name is compared one label at a time starting from the
+ * top-level domain and all the labels in @domain_suffix_match shall be
+ * included in the certificate. The certificate may include additional
+ * sub-level labels in addition to the required labels.
+ *
+ * For example, domain_suffix_match=example.com would match
+ * test.example.com but would not match test-example.com.
+ */
+ char *domain_suffix_match;
+
+ /**
+ * domain - Home service provider FQDN(s)
+ *
+ * This is used to compare against the Domain Name List to figure out
+ * whether the AP is operated by the Home SP. Multiple domain entries
+ * can be used to configure alternative FQDNs that will be considered
+ * home networks.
+ */
+ char **domain;
+
+ /**
+ * num_domain - Number of FQDNs in the domain array
+ */
+ size_t num_domain;
+
+ /**
+ * roaming_consortium - Roaming Consortium OI
+ *
+ * If roaming_consortium_len is non-zero, this field contains the
+ * Roaming Consortium OI that can be used to determine which access
+ * points support authentication with this credential. This is an
+ * alternative to the use of the realm parameter. When using Roaming
+ * Consortium to match the network, the EAP parameters need to be
+ * pre-configured with the credential since the NAI Realm information
+ * may not be available or fetched.
+ */
+ u8 roaming_consortium[15];
+
+ /**
+ * roaming_consortium_len - Length of roaming_consortium
+ */
+ size_t roaming_consortium_len;
+
+ /**
+ * required_roaming_consortium - Required Roaming Consortium OI
+ *
+ * If required_roaming_consortium_len is non-zero, this field contains
+ * the Roaming Consortium OI that is required to be advertised by the AP
+ * for the credential to be considered matching.
+ */
+ u8 required_roaming_consortium[15];
+
+ /**
+ * required_roaming_consortium_len - Length of required_roaming_consortium
+ */
+ size_t required_roaming_consortium_len;
+
+ /**
+ * roaming_consortiums - Roaming Consortium OI(s) memberships
+ *
+ * This field contains one or more OIs identifying the roaming
+ * consortiums of which the provider is a member. The list is sorted
+ * from the most preferred one to the least preferred one. A match
+ * between the Roaming Consortium OIs advertised by an AP and the OIs
+ * in this list indicates that successful authentication is possible.
+ * (Hotspot 2.0 PerProviderSubscription/<X+>/HomeSP/RoamingConsortiumOI)
+ */
+ u8 roaming_consortiums[MAX_ROAMING_CONS][MAX_ROAMING_CONS_OI_LEN];
+
+ /**
+ * roaming_consortiums_len - Length on roaming_consortiums[i]
+ */
+ size_t roaming_consortiums_len[MAX_ROAMING_CONS];
+
+ /**
+ * num_roaming_consortiums - Number of entries in roaming_consortiums
+ */
+ unsigned int num_roaming_consortiums;
+
+ /**
+ * eap_method - EAP method to use
+ *
+ * Pre-configured EAP method to use with this credential or %NULL to
+ * indicate no EAP method is selected, i.e., the method will be
+ * selected automatically based on ANQP information.
+ */
+ struct eap_method_type *eap_method;
+
+ /**
+ * phase1 - Phase 1 (outer authentication) parameters
+ *
+ * Pre-configured EAP parameters or %NULL.
+ */
+ char *phase1;
+
+ /**
+ * phase2 - Phase 2 (inner authentication) parameters
+ *
+ * Pre-configured EAP parameters or %NULL.
+ */
+ char *phase2;
+
+ struct excluded_ssid {
+ u8 ssid[SSID_MAX_LEN];
+ size_t ssid_len;
+ } *excluded_ssid;
+ size_t num_excluded_ssid;
+
+ struct roaming_partner {
+ char fqdn[128];
+ int exact_match;
+ u8 priority;
+ char country[3];
+ } *roaming_partner;
+ size_t num_roaming_partner;
+
+ int update_identifier;
+
+ /**
+ * provisioning_sp - FQDN of the SP that provisioned the credential
+ */
+ char *provisioning_sp;
+
+ /**
+ * sp_priority - Credential priority within a provisioning SP
+ *
+ * This is the priority of the credential among all credentials
+ * provisionined by the same SP (i.e., for entries that have identical
+ * provisioning_sp value). The range of this priority is 0-255 with 0
+ * being the highest and 255 the lower priority.
+ */
+ int sp_priority;
+
+ unsigned int min_dl_bandwidth_home;
+ unsigned int min_ul_bandwidth_home;
+ unsigned int min_dl_bandwidth_roaming;
+ unsigned int min_ul_bandwidth_roaming;
+
+ /**
+ * max_bss_load - Maximum BSS Load Channel Utilization (1..255)
+ * This value is used as the maximum channel utilization for network
+ * selection purposes for home networks. If the AP does not advertise
+ * BSS Load or if the limit would prevent any connection, this
+ * constraint will be ignored.
+ */
+ unsigned int max_bss_load;
+
+ size_t num_req_conn_capab;
+ u8 *req_conn_capab_proto;
+ int **req_conn_capab_port;
+
+ /**
+ * ocsp - Whether to use/require OCSP to check server certificate
+ *
+ * 0 = do not use OCSP stapling (TLS certificate status extension)
+ * 1 = try to use OCSP stapling, but not require response
+ * 2 = require valid OCSP stapling response
+ */
+ int ocsp;
+
+ /**
+ * sim_num - User selected SIM identifier
+ *
+ * This variable is used for identifying which SIM is used if the system
+ * has more than one.
+ */
+ int sim_num;
+};
+
+
+#define CFG_CHANGED_DEVICE_NAME BIT(0)
+#define CFG_CHANGED_CONFIG_METHODS BIT(1)
+#define CFG_CHANGED_DEVICE_TYPE BIT(2)
+#define CFG_CHANGED_OS_VERSION BIT(3)
+#define CFG_CHANGED_UUID BIT(4)
+#define CFG_CHANGED_COUNTRY BIT(5)
+#define CFG_CHANGED_SEC_DEVICE_TYPE BIT(6)
+#define CFG_CHANGED_P2P_SSID_POSTFIX BIT(7)
+#define CFG_CHANGED_WPS_STRING BIT(8)
+#define CFG_CHANGED_P2P_INTRA_BSS BIT(9)
+#define CFG_CHANGED_VENDOR_EXTENSION BIT(10)
+#define CFG_CHANGED_P2P_LISTEN_CHANNEL BIT(11)
+#define CFG_CHANGED_P2P_OPER_CHANNEL BIT(12)
+#define CFG_CHANGED_P2P_PREF_CHAN BIT(13)
+#define CFG_CHANGED_EXT_PW_BACKEND BIT(14)
+#define CFG_CHANGED_NFC_PASSWORD_TOKEN BIT(15)
+#define CFG_CHANGED_P2P_PASSPHRASE_LEN BIT(16)
+#define CFG_CHANGED_SCHED_SCAN_PLANS BIT(17)
+#define CFG_CHANGED_WOWLAN_TRIGGERS BIT(18)
+#define CFG_CHANGED_DISABLE_BTM BIT(19)
+#define CFG_CHANGED_BGSCAN BIT(20)
+
+/**
+ * struct wpa_config - wpa_supplicant configuration data
+ *
+ * This data structure is presents the per-interface (radio) configuration
+ * data. In many cases, there is only one struct wpa_config instance, but if
+ * more than one network interface is being controlled, one instance is used
+ * for each.
+ */
+struct wpa_config {
+ /**
+ * ssid - Head of the global network list
+ *
+ * This is the head for the list of all the configured networks.
+ */
+ struct wpa_ssid *ssid;
+
+ /**
+ * pssid - Per-priority network lists (in priority order)
+ */
+ struct wpa_ssid **pssid;
+
+ /**
+ * num_prio - Number of different priorities used in the pssid lists
+ *
+ * This indicates how many per-priority network lists are included in
+ * pssid.
+ */
+ size_t num_prio;
+
+ /**
+ * cred - Head of the credential list
+ *
+ * This is the head for the list of all the configured credentials.
+ */
+ struct wpa_cred *cred;
+
+ /**
+ * eapol_version - IEEE 802.1X/EAPOL version number
+ *
+ * wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which
+ * defines EAPOL version 2. However, there are many APs that do not
+ * handle the new version number correctly (they seem to drop the
+ * frames completely). In order to make wpa_supplicant interoperate
+ * with these APs, the version number is set to 1 by default. This
+ * configuration value can be used to set it to the new version (2).
+ */
+ int eapol_version;
+
+ /**
+ * ap_scan - AP scanning/selection
+ *
+ * By default, wpa_supplicant requests driver to perform AP
+ * scanning and then uses the scan results to select a
+ * suitable AP. Another alternative is to allow the driver to
+ * take care of AP scanning and selection and use
+ * wpa_supplicant just to process EAPOL frames based on IEEE
+ * 802.11 association information from the driver.
+ *
+ * 1: wpa_supplicant initiates scanning and AP selection (default).
+ *
+ * 0: Driver takes care of scanning, AP selection, and IEEE 802.11
+ * association parameters (e.g., WPA IE generation); this mode can
+ * also be used with non-WPA drivers when using IEEE 802.1X mode;
+ * do not try to associate with APs (i.e., external program needs
+ * to control association). This mode must also be used when using
+ * wired Ethernet drivers.
+ *
+ * 2: like 0, but associate with APs using security policy and SSID
+ * (but not BSSID); this can be used, e.g., with ndiswrapper and NDIS
+ * drivers to enable operation with hidden SSIDs and optimized roaming;
+ * in this mode, the network blocks in the configuration are tried
+ * one by one until the driver reports successful association; each
+ * network block should have explicit security policy (i.e., only one
+ * option in the lists) for key_mgmt, pairwise, group, proto variables.
+ *
+ * Note: ap_scan=2 should not be used with the nl80211 driver interface
+ * (the current Linux interface). ap_scan=1 is optimized work working
+ * with nl80211. For finding networks using hidden SSID, scan_ssid=1 in
+ * the network block can be used with nl80211.
+ */
+ int ap_scan;
+
+ /**
+ * bgscan - Background scan and roaming parameters or %NULL if none
+ *
+ * This is an optional set of parameters for background scanning and
+ * roaming within a network (ESS). For more detailed information see
+ * ssid block documentation.
+ *
+ * The variable defines default bgscan behavior for all BSS station
+ * networks except for those which have their own bgscan configuration.
+ */
+ char *bgscan;
+
+ /**
+ * disable_scan_offload - Disable automatic offloading of scan requests
+ *
+ * By default, %wpa_supplicant tries to offload scanning if the driver
+ * indicates support for this (sched_scan). This configuration
+ * parameter can be used to disable this offloading mechanism.
+ */
+ int disable_scan_offload;
+
+ /**
+ * ctrl_interface - Parameters for the control interface
+ *
+ * If this is specified, %wpa_supplicant will open a control interface
+ * that is available for external programs to manage %wpa_supplicant.
+ * The meaning of this string depends on which control interface
+ * mechanism is used. For all cases, the existence of this parameter
+ * in configuration is used to determine whether the control interface
+ * is enabled.
+ *
+ * For UNIX domain sockets (default on Linux and BSD): This is a
+ * directory that will be created for UNIX domain sockets for listening
+ * to requests from external programs (CLI/GUI, etc.) for status
+ * information and configuration. The socket file will be named based
+ * on the interface name, so multiple %wpa_supplicant processes can be
+ * run at the same time if more than one interface is used.
+ * /var/run/wpa_supplicant is the recommended directory for sockets and
+ * by default, wpa_cli will use it when trying to connect with
+ * %wpa_supplicant.
+ *
+ * Access control for the control interface can be configured
+ * by setting the directory to allow only members of a group
+ * to use sockets. This way, it is possible to run
+ * %wpa_supplicant as root (since it needs to change network
+ * configuration and open raw sockets) and still allow GUI/CLI
+ * components to be run as non-root users. However, since the
+ * control interface can be used to change the network
+ * configuration, this access needs to be protected in many
+ * cases. By default, %wpa_supplicant is configured to use gid
+ * 0 (root). If you want to allow non-root users to use the
+ * control interface, add a new group and change this value to
+ * match with that group. Add users that should have control
+ * interface access to this group.
+ *
+ * When configuring both the directory and group, use following format:
+ * DIR=/var/run/wpa_supplicant GROUP=wheel
+ * DIR=/var/run/wpa_supplicant GROUP=0
+ * (group can be either group name or gid)
+ *
+ * For UDP connections (default on Windows): The value will be ignored.
+ * This variable is just used to select that the control interface is
+ * to be created. The value can be set to, e.g., udp
+ * (ctrl_interface=udp).
+ *
+ * For Windows Named Pipe: This value can be used to set the security
+ * descriptor for controlling access to the control interface. Security
+ * descriptor can be set using Security Descriptor String Format (see
+ * http://msdn.microsoft.com/library/default.asp?url=/library/en-us/secauthz/security/security_descriptor_string_format.asp).
+ * The descriptor string needs to be prefixed with SDDL=. For example,
+ * ctrl_interface=SDDL=D: would set an empty DACL (which will reject
+ * all connections).
+ */
+ char *ctrl_interface;
+
+ /**
+ * ctrl_interface_group - Control interface group (DEPRECATED)
+ *
+ * This variable is only used for backwards compatibility. Group for
+ * UNIX domain sockets should now be specified using GROUP=group in
+ * ctrl_interface variable.
+ */
+ char *ctrl_interface_group;
+
+ /**
+ * fast_reauth - EAP fast re-authentication (session resumption)
+ *
+ * By default, fast re-authentication is enabled for all EAP methods
+ * that support it. This variable can be used to disable fast
+ * re-authentication (by setting fast_reauth=0). Normally, there is no
+ * need to disable fast re-authentication.
+ */
+ int fast_reauth;
+
+ /**
+ * opensc_engine_path - Path to the OpenSSL engine for opensc
+ *
+ * This is an OpenSSL specific configuration option for loading OpenSC
+ * engine (engine_opensc.so); if %NULL, this engine is not loaded.
+ */
+ char *opensc_engine_path;
+
+ /**
+ * pkcs11_engine_path - Path to the OpenSSL engine for PKCS#11
+ *
+ * This is an OpenSSL specific configuration option for loading PKCS#11
+ * engine (engine_pkcs11.so); if %NULL, this engine is not loaded.
+ */
+ char *pkcs11_engine_path;
+
+ /**
+ * pkcs11_module_path - Path to the OpenSSL OpenSC/PKCS#11 module
+ *
+ * This is an OpenSSL specific configuration option for configuring
+ * path to OpenSC/PKCS#11 engine (opensc-pkcs11.so); if %NULL, this
+ * module is not loaded.
+ */
+ char *pkcs11_module_path;
+
+ /**
+ * openssl_ciphers - OpenSSL cipher string
+ *
+ * This is an OpenSSL specific configuration option for configuring the
+ * default ciphers. If not set, "DEFAULT:!EXP:!LOW" is used as the
+ * default.
+ */
+ char *openssl_ciphers;
+
+ /**
+ * pcsc_reader - PC/SC reader name prefix
+ *
+ * If not %NULL, PC/SC reader with a name that matches this prefix is
+ * initialized for SIM/USIM access. Empty string can be used to match
+ * the first available reader.
+ */
+ char *pcsc_reader;
+
+ /**
+ * pcsc_pin - PIN for USIM, GSM SIM, and smartcards
+ *
+ * This field is used to configure PIN for SIM/USIM for EAP-SIM and
+ * EAP-AKA. If left out, this will be asked through control interface.
+ */
+ char *pcsc_pin;
+
+ /**
+ * external_sim - Use external processing for SIM/USIM operations
+ */
+ int external_sim;
+
+ /**
+ * driver_param - Driver interface parameters
+ *
+ * This text string is passed to the selected driver interface with the
+ * optional struct wpa_driver_ops::set_param() handler. This can be
+ * used to configure driver specific options without having to add new
+ * driver interface functionality.
+ */
+ char *driver_param;
+
+ /**
+ * dot11RSNAConfigPMKLifetime - Maximum lifetime of a PMK
+ *
+ * dot11 MIB variable for the maximum lifetime of a PMK in the PMK
+ * cache (unit: seconds).
+ */
+ unsigned int dot11RSNAConfigPMKLifetime;
+
+ /**
+ * dot11RSNAConfigPMKReauthThreshold - PMK re-authentication threshold
+ *
+ * dot11 MIB variable for the percentage of the PMK lifetime
+ * that should expire before an IEEE 802.1X reauthentication occurs.
+ */
+ unsigned int dot11RSNAConfigPMKReauthThreshold;
+
+ /**
+ * dot11RSNAConfigSATimeout - Security association timeout
+ *
+ * dot11 MIB variable for the maximum time a security association
+ * shall take to set up (unit: seconds).
+ */
+ unsigned int dot11RSNAConfigSATimeout;
+
+ /**
+ * update_config - Is wpa_supplicant allowed to update configuration
+ *
+ * This variable control whether wpa_supplicant is allow to re-write
+ * its configuration with wpa_config_write(). If this is zero,
+ * configuration data is only changed in memory and the external data
+ * is not overridden. If this is non-zero, wpa_supplicant will update
+ * the configuration data (e.g., a file) whenever configuration is
+ * changed. This update may replace the old configuration which can
+ * remove comments from it in case of a text file configuration.
+ */
+ int update_config;
+
+ /**
+ * blobs - Configuration blobs
+ */
+ struct wpa_config_blob *blobs;
+
+ /**
+ * uuid - Universally Unique IDentifier (UUID; see RFC 4122) for WPS
+ */
+ u8 uuid[16];
+
+ /**
+ * auto_uuid - Automatic UUID behavior
+ * 0 = generate static value based on the local MAC address (default)
+ * 1 = generate a random UUID every time wpa_supplicant starts
+ */
+ int auto_uuid;
+
+ /**
+ * device_name - Device Name (WPS)
+ * User-friendly description of device; up to 32 octets encoded in
+ * UTF-8
+ */
+ char *device_name;
+
+ /**
+ * manufacturer - Manufacturer (WPS)
+ * The manufacturer of the device (up to 64 ASCII characters)
+ */
+ char *manufacturer;
+
+ /**
+ * model_name - Model Name (WPS)
+ * Model of the device (up to 32 ASCII characters)
+ */
+ char *model_name;
+
+ /**
+ * model_number - Model Number (WPS)
+ * Additional device description (up to 32 ASCII characters)
+ */
+ char *model_number;
+
+ /**
+ * serial_number - Serial Number (WPS)
+ * Serial number of the device (up to 32 characters)
+ */
+ char *serial_number;
+
+ /**
+ * device_type - Primary Device Type (WPS)
+ */
+ u8 device_type[WPS_DEV_TYPE_LEN];
+
+ /**
+ * config_methods - Config Methods
+ *
+ * This is a space-separated list of supported WPS configuration
+ * methods. For example, "label virtual_display virtual_push_button
+ * keypad".
+ * Available methods: usba ethernet label display ext_nfc_token
+ * int_nfc_token nfc_interface push_button keypad
+ * virtual_display physical_display
+ * virtual_push_button physical_push_button.
+ */
+ char *config_methods;
+
+ /**
+ * os_version - OS Version (WPS)
+ * 4-octet operating system version number
+ */
+ u8 os_version[4];
+
+ /**
+ * country - Country code
+ *
+ * This is the ISO/IEC alpha2 country code for which we are operating
+ * in
+ */
+ char country[2];
+
+ /**
+ * wps_cred_processing - Credential processing
+ *
+ * 0 = process received credentials internally
+ * 1 = do not process received credentials; just pass them over
+ * ctrl_iface to external program(s)
+ * 2 = process received credentials internally and pass them over
+ * ctrl_iface to external program(s)
+ */
+ int wps_cred_processing;
+
+ /**
+ * wps_cred_add_sae - Whether to enable SAE automatically for WPS
+ *
+ * 0 = only add the explicitly listed WPA2-PSK configuration
+ * 1 = add both the WPA2-PSK and SAE configuration and enable PMF so
+ * that the station gets configured in WPA3-Personal transition mode
+ * (supports both WPA2-Personal (PSK) and WPA3-Personal (SAE) APs).
+ */
+ int wps_cred_add_sae;
+
+#define MAX_SEC_DEVICE_TYPES 5
+ /**
+ * sec_device_types - Secondary Device Types (P2P)
+ */
+ u8 sec_device_type[MAX_SEC_DEVICE_TYPES][WPS_DEV_TYPE_LEN];
+ int num_sec_device_types;
+
+ int p2p_listen_reg_class;
+ int p2p_listen_channel;
+ int p2p_oper_reg_class;
+ int p2p_oper_channel;
+ int p2p_go_intent;
+ char *p2p_ssid_postfix;
+ int persistent_reconnect;
+ int p2p_intra_bss;
+ unsigned int num_p2p_pref_chan;
+ struct p2p_channel *p2p_pref_chan;
+ struct wpa_freq_range_list p2p_no_go_freq;
+ int p2p_add_cli_chan;
+ int p2p_ignore_shared_freq;
+ int p2p_optimize_listen_chan;
+
+ int p2p_6ghz_disable;
+
+ struct wpabuf *wps_vendor_ext_m1;
+
+#define MAX_WPS_VENDOR_EXT 10
+ /**
+ * wps_vendor_ext - Vendor extension attributes in WPS
+ */
+ struct wpabuf *wps_vendor_ext[MAX_WPS_VENDOR_EXT];
+
+ /**
+ * p2p_group_idle - Maximum idle time in seconds for P2P group
+ *
+ * This value controls how long a P2P group is maintained after there
+ * is no other members in the group. As a GO, this means no associated
+ * stations in the group. As a P2P client, this means no GO seen in
+ * scan results. The maximum idle time is specified in seconds with 0
+ * indicating no time limit, i.e., the P2P group remains in active
+ * state indefinitely until explicitly removed. As a P2P client, the
+ * maximum idle time of P2P_MAX_CLIENT_IDLE seconds is enforced, i.e.,
+ * this parameter is mainly meant for GO use and for P2P client, it can
+ * only be used to reduce the default timeout to smaller value. A
+ * special value -1 can be used to configure immediate removal of the
+ * group for P2P client role on any disconnection after the data
+ * connection has been established.
+ */
+ int p2p_group_idle;
+
+ /**
+ * p2p_go_freq_change_policy - The GO frequency change policy
+ *
+ * This controls the behavior of the GO when there is a change in the
+ * map of the currently used frequencies in case more than one channel
+ * is supported.
+ *
+ * @P2P_GO_FREQ_MOVE_SCM: Prefer working in a single channel mode if
+ * possible. In case the GO is the only interface using its frequency
+ * and there are other station interfaces on other frequencies, the GO
+ * will migrate to one of these frequencies.
+ *
+ * @P2P_GO_FREQ_MOVE_SCM_PEER_SUPPORTS: Same as P2P_GO_FREQ_MOVE_SCM,
+ * but a transition is possible only in case one of the other used
+ * frequencies is one of the frequencies in the intersection of the
+ * frequency list of the local device and the peer device.
+ *
+ * @P2P_GO_FREQ_MOVE_STAY: Prefer to stay on the current frequency.
+ *
+ * @P2P_GO_FREQ_MOVE_SCM_ECSA: Same as
+ * P2P_GO_FREQ_MOVE_SCM_PEER_SUPPORTS but a transition is possible only
+ * if all the group members advertise eCSA support.
+ */
+ enum {
+ P2P_GO_FREQ_MOVE_SCM = 0,
+ P2P_GO_FREQ_MOVE_SCM_PEER_SUPPORTS = 1,
+ P2P_GO_FREQ_MOVE_STAY = 2,
+ P2P_GO_FREQ_MOVE_SCM_ECSA = 3,
+ P2P_GO_FREQ_MOVE_MAX = P2P_GO_FREQ_MOVE_SCM_ECSA,
+ } p2p_go_freq_change_policy;
+
+#define DEFAULT_P2P_GO_FREQ_MOVE P2P_GO_FREQ_MOVE_STAY
+
+ /**
+ * p2p_passphrase_len - Passphrase length (8..63) for P2P GO
+ *
+ * This parameter controls the length of the random passphrase that is
+ * generated at the GO.
+ */
+ unsigned int p2p_passphrase_len;
+
+ /**
+ * bss_max_count - Maximum number of BSS entries to keep in memory
+ */
+ unsigned int bss_max_count;
+
+ /**
+ * bss_expiration_age - BSS entry age after which it can be expired
+ *
+ * This value controls the time in seconds after which a BSS entry
+ * gets removed if it has not been updated or is not in use.
+ */
+ unsigned int bss_expiration_age;
+
+ /**
+ * bss_expiration_scan_count - Expire BSS after number of scans
+ *
+ * If the BSS entry has not been seen in this many scans, it will be
+ * removed. A value of 1 means that entry is removed after the first
+ * scan in which the BSSID is not seen. Larger values can be used
+ * to avoid BSS entries disappearing if they are not visible in
+ * every scan (e.g., low signal quality or interference).
+ */
+ unsigned int bss_expiration_scan_count;
+
+ /**
+ * filter_ssids - SSID-based scan result filtering
+ *
+ * 0 = do not filter scan results
+ * 1 = only include configured SSIDs in scan results/BSS table
+ */
+ int filter_ssids;
+
+ /**
+ * filter_rssi - RSSI-based scan result filtering
+ *
+ * 0 = do not filter scan results
+ * -n = filter scan results below -n dBm
+ */
+ int filter_rssi;
+
+ /**
+ * max_num_sta - Maximum number of STAs in an AP/P2P GO
+ */
+ unsigned int max_num_sta;
+
+ /**
+ * ap_isolate - Whether to use client isolation feature
+ *
+ * Client isolation can be used to prevent low-level bridging of
+ * frames between associated stations in the BSS. By default,
+ * this bridging is allowed (ap_isolate=0); except in P2P GO case,
+ * where p2p_intra_bss parameter is used to determine whether to allow
+ * intra-BSS forwarding (ap_isolate = !p2p_intra_bss).
+ *
+ * 0 = do not enable AP isolation
+ * 1 = enable AP isolation
+ */
+ int ap_isolate;
+
+ /**
+ * freq_list - Array of allowed scan frequencies or %NULL for all
+ *
+ * This is an optional zero-terminated array of frequencies in
+ * megahertz (MHz) to allow for narrowing scanning range.
+ */
+ int *freq_list;
+
+ /**
+ * initial_freq_list - like freq_list but for initial scan
+ *
+ * This is an optional zero-terminated array of frequencies in
+ * megahertz (MHz) to allow for narrowing scanning range when
+ * the application is started.
+ *
+ * This can be used to speed up initial connection time if the
+ * channel is known ahead of time, without limiting the scanned
+ * frequencies during normal use.
+ */
+ int *initial_freq_list;
+
+ /**
+ * scan_cur_freq - Whether to scan only the current channel
+ *
+ * If true, attempt to scan only the current channel if any other
+ * VIFs on this radio are already associated on a particular channel.
+ */
+ int scan_cur_freq;
+
+ /**
+ * scan_res_valid_for_connect - Seconds scans are valid for association
+ *
+ * This configures the number of seconds old scan results are considered
+ * valid for association. When scan results are older than this value
+ * a new scan is triggered prior to the association.
+ */
+ int scan_res_valid_for_connect;
+
+ /**
+ * changed_parameters - Bitmap of changed parameters since last update
+ */
+ unsigned int changed_parameters;
+
+ /**
+ * disassoc_low_ack - Disassociate stations with massive packet loss
+ */
+ int disassoc_low_ack;
+
+ /**
+ * interworking - Whether Interworking (IEEE 802.11u) is enabled
+ */
+ int interworking;
+
+ /**
+ * access_network_type - Access Network Type
+ *
+ * When Interworking is enabled, scans will be limited to APs that
+ * advertise the specified Access Network Type (0..15; with 15
+ * indicating wildcard match).
+ */
+ int access_network_type;
+
+ /**
+ * go_interworking - Whether Interworking for P2P GO is enabled
+ */
+ int go_interworking;
+
+ /**
+ * go_access_network_type - P2P GO Access Network Type
+ *
+ * This indicates which access network type to advertise if Interworking
+ * is enabled for P2P GO.
+ */
+ int go_access_network_type;
+
+ /**
+ * go_internet - Interworking: Internet connectivity (0 or 1)
+ */
+ int go_internet;
+
+ /**
+ * go_venue_group - Interworking: Venue group
+ */
+ int go_venue_group;
+
+ /**
+ * go_venue_type: Interworking: Venue type
+ */
+ int go_venue_type;
+
+ /**
+ * hessid - Homogeneous ESS identifier
+ *
+ * If this is set (any octet is non-zero), scans will be used to
+ * request response only from BSSes belonging to the specified
+ * Homogeneous ESS. This is used only if interworking is enabled.
+ */
+ u8 hessid[ETH_ALEN];
+
+ /**
+ * hs20 - Hotspot 2.0
+ */
+ int hs20;
+
+ /**
+ * pbc_in_m1 - AP mode WPS probing workaround for PBC with Windows 7
+ *
+ * Windows 7 uses incorrect way of figuring out AP's WPS capabilities
+ * by acting as a Registrar and using M1 from the AP. The config
+ * methods attribute in that message is supposed to indicate only the
+ * configuration method supported by the AP in Enrollee role, i.e., to
+ * add an external Registrar. For that case, PBC shall not be used and
+ * as such, the PushButton config method is removed from M1 by default.
+ * If pbc_in_m1=1 is included in the configuration file, the PushButton
+ * config method is left in M1 (if included in config_methods
+ * parameter) to allow Windows 7 to use PBC instead of PIN (e.g., from
+ * a label in the AP).
+ */
+ int pbc_in_m1;
+
+ /**
+ * autoscan - Automatic scan parameters or %NULL if none
+ *
+ * This is an optional set of parameters for automatic scanning
+ * within an interface in following format:
+ * <autoscan module name>:<module parameters>
+ */
+ char *autoscan;
+
+ /**
+ * wps_nfc_pw_from_config - NFC Device Password was read from config
+ *
+ * This parameter can be determined whether the NFC Device Password was
+ * included in the configuration (1) or generated dynamically (0). Only
+ * the former case is re-written back to the configuration file.
+ */
+ int wps_nfc_pw_from_config;
+
+ /**
+ * wps_nfc_dev_pw_id - NFC Device Password ID for password token
+ */
+ int wps_nfc_dev_pw_id;
+
+ /**
+ * wps_nfc_dh_pubkey - NFC DH Public Key for password token
+ */
+ struct wpabuf *wps_nfc_dh_pubkey;
+
+ /**
+ * wps_nfc_dh_privkey - NFC DH Private Key for password token
+ */
+ struct wpabuf *wps_nfc_dh_privkey;
+
+ /**
+ * wps_nfc_dev_pw - NFC Device Password for password token
+ */
+ struct wpabuf *wps_nfc_dev_pw;
+
+ /**
+ * ext_password_backend - External password backend or %NULL if none
+ *
+ * format: <backend name>[:<optional backend parameters>]
+ */
+ char *ext_password_backend;
+
+ /*
+ * p2p_go_max_inactivity - Timeout in seconds to detect STA inactivity
+ *
+ * This timeout value is used in P2P GO mode to clean up
+ * inactive stations.
+ * By default: 300 seconds.
+ */
+ int p2p_go_max_inactivity;
+
+ struct hostapd_wmm_ac_params wmm_ac_params[4];
+ struct hostapd_tx_queue_params tx_queue[4];
+
+ /**
+ * auto_interworking - Whether to use network selection automatically
+ *
+ * 0 = do not automatically go through Interworking network selection
+ * (i.e., require explicit interworking_select command for this)
+ * 1 = perform Interworking network selection if one or more
+ * credentials have been configured and scan did not find a
+ * matching network block
+ */
+ int auto_interworking;
+
+ /**
+ * p2p_go_ht40 - Default mode for HT40 enable when operating as GO.
+ *
+ * This will take effect for p2p_group_add, p2p_connect, and p2p_invite.
+ * Note that regulatory constraints and driver capabilities are
+ * consulted anyway, so setting it to 1 can't do real harm.
+ * By default: 0 (disabled)
+ */
+ int p2p_go_ht40;
+
+ /**
+ * p2p_go_vht - Default mode for VHT enable when operating as GO
+ *
+ * This will take effect for p2p_group_add, p2p_connect, and p2p_invite.
+ * Note that regulatory constraints and driver capabilities are
+ * consulted anyway, so setting it to 1 can't do real harm.
+ * By default: 0 (disabled)
+ */
+ int p2p_go_vht;
+
+ /**
+ * p2p_go_edmg - Default mode for EDMG enable when operating as GO
+ *
+ * This will take effect for p2p_group_add, p2p_connect, and p2p_invite.
+ * Note that regulatory constraints and driver capabilities are
+ * consulted anyway, so setting it to 1 can't do real harm.
+ * By default: 0 (disabled)
+ */
+ int p2p_go_edmg;
+
+ /**
+ * p2p_go_he - Default mode for 11ax HE enable when operating as GO
+ *
+ * This will take effect for p2p_group_add, p2p_connect, and p2p_invite.
+ * Note that regulatory constraints and driver capabilities are
+ * consulted anyway, so setting it to 1 can't do real harm.
+ * By default: 0 (disabled)
+ */
+ int p2p_go_he;
+
+ /**
+ * p2p_go_ctwindow - CTWindow to use when operating as GO
+ *
+ * By default: 0 (no CTWindow). Values 0-127 can be used to indicate
+ * the length of the CTWindow in TUs.
+ */
+ int p2p_go_ctwindow;
+
+ /**
+ * p2p_disabled - Whether P2P operations are disabled for this interface
+ */
+ int p2p_disabled;
+
+ /**
+ * p2p_no_group_iface - Whether group interfaces can be used
+ *
+ * By default, wpa_supplicant will create a separate interface for P2P
+ * group operations if the driver supports this. This functionality can
+ * be disabled by setting this parameter to 1. In that case, the same
+ * interface that was used for the P2P management operations is used
+ * also for the group operation.
+ */
+ int p2p_no_group_iface;
+
+ /**
+ * p2p_cli_probe - Enable/disable P2P CLI probe request handling
+ *
+ * If this parameter is set to 1, a connected P2P Client will receive
+ * and handle Probe Request frames. Setting this parameter to 0
+ * disables this option. Default value: 0.
+ *
+ * Note: Setting this property at run time takes effect on the following
+ * interface state transition to/from the WPA_COMPLETED state.
+ */
+ int p2p_cli_probe;
+
+ /**
+ * okc - Whether to enable opportunistic key caching by default
+ *
+ * By default, OKC is disabled unless enabled by the per-network
+ * proactive_key_caching=1 parameter. okc=1 can be used to change this
+ * default behavior.
+ */
+ int okc;
+
+ /**
+ * pmf - Whether to enable/require PMF by default
+ *
+ * By default, PMF is disabled unless enabled by the per-network
+ * ieee80211w=1 or ieee80211w=2 parameter. pmf=1/2 can be used to change
+ * this default behavior for RSN network (this is not applicable for
+ * non-RSN cases).
+ */
+ enum mfp_options pmf;
+
+ /**
+ * sae_groups - Preference list of enabled groups for SAE
+ *
+ * By default (if this parameter is not set), the mandatory group 19
+ * (ECC group defined over a 256-bit prime order field) is preferred,
+ * but other groups are also enabled. If this parameter is set, the
+ * groups will be tried in the indicated order.
+ */
+ int *sae_groups;
+
+ /**
+ * sae_pwe - SAE mechanism for PWE derivation
+ * 0 = hunting-and-pecking loop only
+ * 1 = hash-to-element only
+ * 2 = both hunting-and-pecking loop and hash-to-element enabled
+ */
+ int sae_pwe;
+
+ /**
+ * sae_pmkid_in_assoc - Whether to include PMKID in SAE Assoc Req
+ */
+ int sae_pmkid_in_assoc;
+
+ /**
+ * dtim_period - Default DTIM period in Beacon intervals
+ *
+ * This parameter can be used to set the default value for network
+ * blocks that do not specify dtim_period.
+ */
+ int dtim_period;
+
+ /**
+ * beacon_int - Default Beacon interval in TU
+ *
+ * This parameter can be used to set the default value for network
+ * blocks that do not specify beacon_int.
+ */
+ int beacon_int;
+
+ /**
+ * ap_vendor_elements: Vendor specific elements for Beacon/ProbeResp
+ *
+ * This parameter can be used to define additional vendor specific
+ * elements for Beacon and Probe Response frames in AP/P2P GO mode. The
+ * format for these element(s) is a hexdump of the raw information
+ * elements (id+len+payload for one or more elements).
+ */
+ struct wpabuf *ap_vendor_elements;
+
+ /**
+ * ap_assocresp_elements: Vendor specific elements for (Re)Association
+ * Response frames
+ *
+ * This parameter can be used to define additional vendor specific
+ * elements for (Re)Association Response frames in AP/P2P GO mode. The
+ * format for these element(s) is a hexdump of the raw information
+ * elements (id+len+payload for one or more elements).
+ */
+ struct wpabuf *ap_assocresp_elements;
+
+ /**
+ * ignore_old_scan_res - Ignore scan results older than request
+ *
+ * The driver may have a cache of scan results that makes it return
+ * information that is older than our scan trigger. This parameter can
+ * be used to configure such old information to be ignored instead of
+ * allowing it to update the internal BSS table.
+ */
+ int ignore_old_scan_res;
+
+ /**
+ * sched_scan_interval - schedule scan interval
+ */
+ unsigned int sched_scan_interval;
+
+ /**
+ * sched_scan_start_delay - Schedule scan start delay before first scan
+ *
+ * Delay (in seconds) before scheduling first scan plan cycle. The
+ * driver may ignore this parameter and start immediately (or at any
+ * other time), if this feature is not supported.
+ */
+ unsigned int sched_scan_start_delay;
+
+ /**
+ * tdls_external_control - External control for TDLS setup requests
+ *
+ * Enable TDLS mode where external programs are given the control
+ * to specify the TDLS link to get established to the driver. The
+ * driver requests the TDLS setup to the supplicant only for the
+ * specified TDLS peers.
+ */
+ int tdls_external_control;
+
+ u8 ip_addr_go[4];
+ u8 ip_addr_mask[4];
+ u8 ip_addr_start[4];
+ u8 ip_addr_end[4];
+
+ /**
+ * osu_dir - OSU provider information directory
+ *
+ * If set, allow FETCH_OSU control interface command to be used to fetch
+ * OSU provider information into all APs and store the results in this
+ * directory.
+ */
+ char *osu_dir;
+
+ /**
+ * wowlan_triggers - Wake-on-WLAN triggers
+ *
+ * If set, these wowlan triggers will be configured.
+ */
+ char *wowlan_triggers;
+
+ /**
+ * p2p_search_delay - Extra delay between concurrent search iterations
+ *
+ * Add extra delay (in milliseconds) between search iterations when
+ * there is a concurrent operation to make p2p_find friendlier to
+ * concurrent operations by avoiding it from taking 100% of radio
+ * resources.
+ */
+ unsigned int p2p_search_delay;
+
+ /**
+ * mac_addr - MAC address policy default
+ *
+ * 0 = use permanent MAC address
+ * 1 = use random MAC address for each ESS connection
+ * 2 = like 1, but maintain OUI (with local admin bit set)
+ *
+ * By default, permanent MAC address is used unless policy is changed by
+ * the per-network mac_addr parameter. Global mac_addr=1 can be used to
+ * change this default behavior.
+ */
+ int mac_addr;
+
+ /**
+ * rand_addr_lifetime - Lifetime of random MAC address in seconds
+ */
+ unsigned int rand_addr_lifetime;
+
+ /**
+ * preassoc_mac_addr - Pre-association MAC address policy
+ *
+ * 0 = use permanent MAC address
+ * 1 = use random MAC address
+ * 2 = like 1, but maintain OUI (with local admin bit set)
+ */
+ int preassoc_mac_addr;
+
+ /**
+ * key_mgmt_offload - Use key management offload
+ *
+ * Key management offload should be used if the device supports it.
+ * Key management offload is the capability of a device operating as
+ * a station to do the exchange necessary to establish temporal keys
+ * during initial RSN connection, after roaming, or during a PTK
+ * rekeying operation.
+ */
+ int key_mgmt_offload;
+
+ /**
+ * user_mpm - MPM residency
+ *
+ * 0: MPM lives in driver.
+ * 1: wpa_supplicant handles peering and station allocation.
+ *
+ * If AMPE or SAE is enabled, the MPM is always in userspace.
+ */
+ int user_mpm;
+
+ /**
+ * max_peer_links - Maximum number of peer links
+ *
+ * Maximum number of mesh peering currently maintained by the STA.
+ */
+ int max_peer_links;
+
+ /**
+ * cert_in_cb - Whether to include a peer certificate dump in events
+ *
+ * This controls whether peer certificates for authentication server and
+ * its certificate chain are included in EAP peer certificate events.
+ */
+ int cert_in_cb;
+
+ /**
+ * mesh_max_inactivity - Timeout in seconds to detect STA inactivity
+ *
+ * This timeout value is used in mesh STA to clean up inactive stations.
+ * By default: 300 seconds.
+ */
+ int mesh_max_inactivity;
+
+ /**
+ * mesh_fwding - Mesh network layer-2 forwarding (dot11MeshForwarding)
+ *
+ * This controls whether to enable layer-2 forwarding.
+ * By default: 1: enabled
+ */
+ int mesh_fwding;
+
+ /**
+ * dot11RSNASAERetransPeriod - Timeout to retransmit SAE Auth frame
+ *
+ * This timeout value is used in mesh STA to retransmit
+ * SAE Authentication frame.
+ * By default: 1000 milliseconds.
+ */
+ int dot11RSNASAERetransPeriod;
+
+ /**
+ * passive_scan - Whether to force passive scan for network connection
+ *
+ * This parameter can be used to force only passive scanning to be used
+ * for network connection cases. It should be noted that this will slow
+ * down scan operations and reduce likelihood of finding the AP. In
+ * addition, some use cases will override this due to functional
+ * requirements, e.g., for finding an AP that uses hidden SSID
+ * (scan_ssid=1) or P2P device discovery.
+ */
+ int passive_scan;
+
+ /**
+ * reassoc_same_bss_optim - Whether to optimize reassoc-to-same-BSS
+ */
+ int reassoc_same_bss_optim;
+
+ /**
+ * wps_priority - Priority for the networks added through WPS
+ *
+ * This priority value will be set to each network profile that is added
+ * by executing the WPS protocol.
+ */
+ int wps_priority;
+
+ /**
+ * fst_group_id - FST group ID
+ */
+ char *fst_group_id;
+
+ /**
+ * fst_priority - priority of the interface within the FST group
+ */
+ int fst_priority;
+
+ /**
+ * fst_llt - default FST LLT (Link-Lost Timeout) to be used for the
+ * interface.
+ */
+ int fst_llt;
+
+ /**
+ * wpa_rsc_relaxation - RSC relaxation on GTK installation
+ *
+ * Values:
+ * 0 - use the EAPOL-Key RSC value on GTK installation
+ * 1 - use the null RSC if a bogus RSC value is detected in message 3
+ * of 4-Way Handshake or message 1 of Group Key Handshake.
+ */
+ int wpa_rsc_relaxation;
+
+ /**
+ * sched_scan_plans - Scan plans for scheduled scan
+ *
+ * Each scan plan specifies the interval between scans and the number of
+ * iterations. The last scan plan only specifies the scan interval and
+ * will be run infinitely.
+ *
+ * format: <interval:iterations> <interval2:iterations2> ... <interval>
+ */
+ char *sched_scan_plans;
+
+#ifdef CONFIG_MBO
+ /**
+ * non_pref_chan - Non-preferred channels list, separated by spaces.
+ *
+ * format: op_class:chan:preference:reason<:detail>
+ * Detail is optional.
+ */
+ char *non_pref_chan;
+
+ /**
+ * mbo_cell_capa - Cellular capabilities for MBO
+ */
+ enum mbo_cellular_capa mbo_cell_capa;
+
+ /**
+ * disassoc_imminent_rssi_threshold - RSSI threshold of candidate AP
+ * when disassociation imminent is set.
+ */
+ int disassoc_imminent_rssi_threshold;
+
+ /**
+ * oce - Enable OCE in STA and/or STA-CFON mode
+ * - Set BIT(0) to enable OCE in non-AP STA mode
+ * - Set BIT(1) to enable OCE in STA-CFON mode
+ */
+ unsigned int oce;
+#endif /* CONFIG_MBO */
+
+ /**
+ * gas_address3 - GAS Address3 field behavior
+ *
+ * Values:
+ * 0 - P2P specification (Address3 = AP BSSID)
+ * 1 = IEEE 802.11 standard compliant (Address3 = Wildcard BSSID when
+ * sent to not-associated AP; if associated, AP BSSID)
+ */
+ int gas_address3;
+
+ /**
+ * ftm_responder - Publish FTM (fine timing measurement)
+ * responder functionality
+ *
+ * Values:
+ * 0 - do not publish FTM responder functionality (Default)
+ * 1 - publish FTM responder functionality in
+ * bit 70 of Extended Capabilities element
+ * Note, actual FTM responder operation is managed outside
+ * wpa_supplicant.
+ */
+ int ftm_responder;
+
+ /**
+ * ftm_initiator - Publish FTM (fine timing measurement)
+ * initiator functionality
+ *
+ * Values:
+ * 0 - do not publish FTM initiator functionality (Default)
+ * 1 - publish FTM initiator functionality in
+ * bit 71 of Extended Capabilities element
+ * Note, actual FTM initiator operation is managed outside
+ * wpa_supplicant.
+ */
+ int ftm_initiator;
+
+ /**
+ * gas_rand_addr_lifetime - Lifetime of random MAC address for ANQP in
+ * seconds
+ */
+ unsigned int gas_rand_addr_lifetime;
+
+ /**
+ * gas_rand_mac_addr - GAS MAC address policy
+ *
+ * 0 = use permanent MAC address
+ * 1 = use random MAC address
+ * 2 = like 1, but maintain OUI (with local admin bit set)
+ */
+ int gas_rand_mac_addr;
+
+ /**
+ * dpp_config_processing - How to process DPP configuration
+ *
+ * 0 = report received configuration to an external program for
+ * processing; do not generate any network profile internally
+ * 1 = report received configuration to an external program and generate
+ * a network profile internally, but do not automatically connect
+ * to the created (disabled) profile; the network profile id is
+ * reported to external programs
+ * 2 = report received configuration to an external program, generate
+ * a network profile internally, try to connect to the created
+ * profile automatically
+ */
+ int dpp_config_processing;
+
+ /**
+ * dpp_name - Name for Enrollee's DPP Configuration Request
+ */
+ char *dpp_name;
+
+ /**
+ * dpp_mud_url - MUD URL for Enrollee's DPP Configuration Request
+ */
+ char *dpp_mud_url;
+
+ /**
+ * coloc_intf_reporting - Colocated interference reporting
+ *
+ * dot11CoLocIntfReportingActivated
+ * 0 = disabled (false)
+ * 1 = enabled (true)
+ */
+ int coloc_intf_reporting;
+
+ /**
+ * p2p_device_random_mac_addr - P2P Device MAC address policy default
+ *
+ * 0 = use permanent MAC address (the one set by default by the device
+ * driver). Notice that, if the device driver is configured to
+ * always use random MAC addresses, this flag breaks reinvoking a
+ * persistent group, so flags 1 or 2 should be used instead with
+ * such drivers if persistent groups are used.
+ * 1 = use random MAC address on creating the interface if there is no
+ * persistent group. Besides, if a persistent group is created,
+ * p2p_device_persistent_mac_addr is set to the MAC address of the
+ * P2P Device interface, so that this address will be subsequently
+ * used to change the MAC address of the P2P Device interface. With
+ * no persistent group, the random MAC address is created by
+ * wpa_supplicant, changing the one set by the device driver.
+ * The device driver shall support SIOCGIFFLAGS/SIOCSIFFLAGS ioctl
+ * interface control operations.
+ * 2 = this flag should be used when the device driver uses random MAC
+ * addresses by default when a P2P Device interface is created.
+ * If p2p_device_persistent_mac_addr is set, use this MAC address
+ * on creating the P2P Device interface. If not set, use the
+ * default method adopted by the device driver (e.g., random MAC
+ * address). Besides, if a persistent group is created,
+ * p2p_device_persistent_mac_addr is set to the MAC address of the
+ * P2P Device interface, so that this address will be subsequently
+ * used in place of the default address set by the device driver.
+ * (This option does not need support of SIOCGIFFLAGS/SIOCSIFFLAGS
+ * ioctl interface control operations and uses NL80211_ATTR_MAC).
+ *
+ * By default, permanent MAC address is used.
+ */
+ int p2p_device_random_mac_addr;
+
+ /**
+ * p2p_device_persistent_mac_addr - Record last used MAC address
+ *
+ * If there are saved persistent groups, P2P cannot generate another
+ * random MAC address, and need to restore to last used MAC address.
+ */
+ u8 p2p_device_persistent_mac_addr[ETH_ALEN];
+
+ /**
+ * p2p_interface_random_mac_addr - P2P Interface MAC address policy default
+ *
+ * 0 = use permanent MAC address
+ * 1 = use random MAC address on creating the interface.
+ *
+ * By default, permanent MAC address is used.
+ */
+ int p2p_interface_random_mac_addr;
+
+ /**
+ * disable_btm - Disable BSS transition management in STA
+ * - Set to 0 to enable BSS transition management
+ * - Set to 1 to disable BSS transition management
+ *
+ * By default BSS transition management is enabled
+ */
+ int disable_btm;
+
+ /**
+ * extended_key_id - Extended Key ID support
+ *
+ * IEEE Std 802.11-2016 optionally allows to use Key ID 0 and 1 for PTK
+ * keys with Extended Key ID.
+ *
+ * 0 = don't use Extended Key ID
+ * 1 = use Extended Key ID when possible
+ */
+ int extended_key_id;
+
+ /**
+ * wowlan_disconnect_on_deinit - Trigger disconnect on wpa_supplicant
+ * interface deinit even if the driver has enabled WoWLAN.
+ *
+ * 0 = Do not disconnect
+ * 1 = Trigger disconnection
+ */
+ int wowlan_disconnect_on_deinit;
+
+#ifdef CONFIG_PASN
+#ifdef CONFIG_TESTING_OPTIONS
+ /*
+ * Normally, KDK should be derived if and only if both sides support
+ * secure LTF. Allow forcing KDK derivation for testing purposes.
+ */
+ int force_kdk_derivation;
+
+ /* If set, corrupt the MIC in the 3rd Authentication frame of PASN */
+ int pasn_corrupt_mic;
+
+#endif /* CONFIG_TESTING_OPTIONS */
+#endif /* CONFIG_PASN*/
+};
+
+
+/* Prototypes for common functions from config.c */
+
+void wpa_config_free(struct wpa_config *ssid);
+void wpa_config_free_ssid(struct wpa_ssid *ssid);
+void wpa_config_foreach_network(struct wpa_config *config,
+ void (*func)(void *, struct wpa_ssid *),
+ void *arg);
+struct wpa_ssid * wpa_config_get_network(struct wpa_config *config, int id);
+struct wpa_ssid * wpa_config_add_network(struct wpa_config *config);
+int wpa_config_remove_network(struct wpa_config *config, int id);
+void wpa_config_set_network_defaults(struct wpa_ssid *ssid);
+int wpa_config_set(struct wpa_ssid *ssid, const char *var, const char *value,
+ int line);
+int wpa_config_set_quoted(struct wpa_ssid *ssid, const char *var,
+ const char *value);
+int wpa_config_dump_values(struct wpa_config *config, char *buf,
+ size_t buflen);
+int wpa_config_get_value(const char *name, struct wpa_config *config,
+ char *buf, size_t buflen);
+
+char ** wpa_config_get_all(struct wpa_ssid *ssid, int get_keys);
+char * wpa_config_get(struct wpa_ssid *ssid, const char *var);
+char * wpa_config_get_no_key(struct wpa_ssid *ssid, const char *var);
+void wpa_config_update_psk(struct wpa_ssid *ssid);
+int wpa_config_add_prio_network(struct wpa_config *config,
+ struct wpa_ssid *ssid);
+int wpa_config_update_prio_list(struct wpa_config *config);
+const struct wpa_config_blob * wpa_config_get_blob(struct wpa_config *config,
+ const char *name);
+void wpa_config_set_blob(struct wpa_config *config,
+ struct wpa_config_blob *blob);
+void wpa_config_free_blob(struct wpa_config_blob *blob);
+int wpa_config_remove_blob(struct wpa_config *config, const char *name);
+void wpa_config_flush_blobs(struct wpa_config *config);
+
+struct wpa_cred * wpa_config_get_cred(struct wpa_config *config, int id);
+struct wpa_cred * wpa_config_add_cred(struct wpa_config *config);
+int wpa_config_remove_cred(struct wpa_config *config, int id);
+void wpa_config_free_cred(struct wpa_cred *cred);
+int wpa_config_set_cred(struct wpa_cred *cred, const char *var,
+ const char *value, int line);
+char * wpa_config_get_cred_no_key(struct wpa_cred *cred, const char *var);
+
+struct wpa_config * wpa_config_alloc_empty(const char *ctrl_interface,
+ const char *driver_param);
+#ifndef CONFIG_NO_STDOUT_DEBUG
+void wpa_config_debug_dump_networks(struct wpa_config *config);
+#else /* CONFIG_NO_STDOUT_DEBUG */
+#define wpa_config_debug_dump_networks(c) do { } while (0)
+#endif /* CONFIG_NO_STDOUT_DEBUG */
+
+
+/* Prototypes for common functions from config.c */
+int wpa_config_process_global(struct wpa_config *config, char *pos, int line);
+
+int wpa_config_get_num_global_field_names(void);
+
+const char * wpa_config_get_global_field_name(unsigned int i, int *no_var);
+
+/* Prototypes for backend specific functions from the selected config_*.c */
+
+/**
+ * wpa_config_read - Read and parse configuration database
+ * @name: Name of the configuration (e.g., path and file name for the
+ * configuration file)
+ * @cfgp: Pointer to previously allocated configuration data or %NULL if none
+ * Returns: Pointer to allocated configuration data or %NULL on failure
+ *
+ * This function reads configuration data, parses its contents, and allocates
+ * data structures needed for storing configuration information. The allocated
+ * data can be freed with wpa_config_free().
+ *
+ * Each configuration backend needs to implement this function.
+ */
+struct wpa_config * wpa_config_read(const char *name, struct wpa_config *cfgp);
+
+/**
+ * wpa_config_write - Write or update configuration data
+ * @name: Name of the configuration (e.g., path and file name for the
+ * configuration file)
+ * @config: Configuration data from wpa_config_read()
+ * Returns: 0 on success, -1 on failure
+ *
+ * This function write all configuration data into an external database (e.g.,
+ * a text file) in a format that can be read with wpa_config_read(). This can
+ * be used to allow wpa_supplicant to update its configuration, e.g., when a
+ * new network is added or a password is changed.
+ *
+ * Each configuration backend needs to implement this function.
+ */
+int wpa_config_write(const char *name, struct wpa_config *config);
+
+#endif /* CONFIG_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/config_ssid.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/config_ssid.h
new file mode 100755
index 0000000..724534d
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/config_ssid.h
@@ -0,0 +1,1182 @@
+/*
+ * WPA Supplicant / Network configuration structures
+ * Copyright (c) 2003-2013, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef CONFIG_SSID_H
+#define CONFIG_SSID_H
+
+#include "common/defs.h"
+#include "utils/list.h"
+#include "eap_peer/eap_config.h"
+
+
+#define DEFAULT_EAP_WORKAROUND ((unsigned int) -1)
+#define DEFAULT_EAPOL_FLAGS (EAPOL_FLAG_REQUIRE_KEY_UNICAST | \
+ EAPOL_FLAG_REQUIRE_KEY_BROADCAST)
+#define DEFAULT_PROTO (WPA_PROTO_WPA | WPA_PROTO_RSN)
+#define DEFAULT_KEY_MGMT (WPA_KEY_MGMT_PSK | WPA_KEY_MGMT_IEEE8021X)
+#ifdef CONFIG_NO_TKIP
+#define DEFAULT_PAIRWISE (WPA_CIPHER_CCMP)
+#define DEFAULT_GROUP (WPA_CIPHER_CCMP)
+#else /* CONFIG_NO_TKIP */
+#define DEFAULT_PAIRWISE (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP)
+#define DEFAULT_GROUP (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP)
+#endif /* CONFIG_NO_TKIP */
+#define DEFAULT_FRAGMENT_SIZE 1398
+
+#define DEFAULT_BG_SCAN_PERIOD -1
+#define DEFAULT_MESH_MAX_RETRIES 2
+#define DEFAULT_MESH_RETRY_TIMEOUT 40
+#define DEFAULT_MESH_CONFIRM_TIMEOUT 40
+#define DEFAULT_MESH_HOLDING_TIMEOUT 40
+#define DEFAULT_MESH_RSSI_THRESHOLD 1 /* no change */
+#define DEFAULT_DISABLE_HT 0
+#define DEFAULT_DISABLE_HT40 0
+#define DEFAULT_DISABLE_SGI 0
+#define DEFAULT_DISABLE_LDPC 0
+#define DEFAULT_TX_STBC -1 /* no change */
+#define DEFAULT_RX_STBC -1 /* no change */
+#define DEFAULT_DISABLE_MAX_AMSDU -1 /* no change */
+#define DEFAULT_AMPDU_FACTOR -1 /* no change */
+#define DEFAULT_AMPDU_DENSITY -1 /* no change */
+#define DEFAULT_USER_SELECTED_SIM 1
+#define DEFAULT_MAX_OPER_CHWIDTH -1
+
+/* Consider global sae_pwe for SAE mechanism for PWE derivation */
+#define DEFAULT_SAE_PWE 4
+
+struct psk_list_entry {
+ struct dl_list list;
+ u8 addr[ETH_ALEN];
+ u8 psk[32];
+ u8 p2p;
+};
+
+enum wpas_mode {
+ WPAS_MODE_INFRA = 0,
+ WPAS_MODE_IBSS = 1,
+ WPAS_MODE_AP = 2,
+ WPAS_MODE_P2P_GO = 3,
+ WPAS_MODE_P2P_GROUP_FORMATION = 4,
+ WPAS_MODE_MESH = 5,
+};
+
+enum sae_pk_mode {
+ SAE_PK_MODE_AUTOMATIC = 0,
+ SAE_PK_MODE_ONLY = 1,
+ SAE_PK_MODE_DISABLED = 2,
+};
+
+/**
+ * struct wpa_ssid - Network configuration data
+ *
+ * This structure includes all the configuration variables for a network. This
+ * data is included in the per-interface configuration data as an element of
+ * the network list, struct wpa_config::ssid. Each network block in the
+ * configuration is mapped to a struct wpa_ssid instance.
+ */
+struct wpa_ssid {
+ /**
+ * next - Next network in global list
+ *
+ * This pointer can be used to iterate over all networks. The head of
+ * this list is stored in the ssid field of struct wpa_config.
+ */
+ struct wpa_ssid *next;
+
+ /**
+ * pnext - Next network in per-priority list
+ *
+ * This pointer can be used to iterate over all networks in the same
+ * priority class. The heads of these list are stored in the pssid
+ * fields of struct wpa_config.
+ */
+ struct wpa_ssid *pnext;
+
+ /**
+ * id - Unique id for the network
+ *
+ * This identifier is used as a unique identifier for each network
+ * block when using the control interface. Each network is allocated an
+ * id when it is being created, either when reading the configuration
+ * file or when a new network is added through the control interface.
+ */
+ int id;
+
+ /**
+ * priority - Priority group
+ *
+ * By default, all networks will get same priority group (0). If some
+ * of the networks are more desirable, this field can be used to change
+ * the order in which wpa_supplicant goes through the networks when
+ * selecting a BSS. The priority groups will be iterated in decreasing
+ * priority (i.e., the larger the priority value, the sooner the
+ * network is matched against the scan results). Within each priority
+ * group, networks will be selected based on security policy, signal
+ * strength, etc.
+ *
+ * Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are
+ * not using this priority to select the order for scanning. Instead,
+ * they try the networks in the order that used in the configuration
+ * file.
+ */
+ int priority;
+
+ /**
+ * ssid - Service set identifier (network name)
+ *
+ * This is the SSID for the network. For wireless interfaces, this is
+ * used to select which network will be used. If set to %NULL (or
+ * ssid_len=0), any SSID can be used. For wired interfaces, this must
+ * be set to %NULL. Note: SSID may contain any characters, even nul
+ * (ASCII 0) and as such, this should not be assumed to be a nul
+ * terminated string. ssid_len defines how many characters are valid
+ * and the ssid field is not guaranteed to be nul terminated.
+ */
+ u8 *ssid;
+
+ /**
+ * ssid_len - Length of the SSID
+ */
+ size_t ssid_len;
+
+ /**
+ * bssid - BSSID
+ *
+ * If set, this network block is used only when associating with the AP
+ * using the configured BSSID
+ *
+ * If this is a persistent P2P group (disabled == 2), this is the GO
+ * Device Address.
+ */
+ u8 bssid[ETH_ALEN];
+
+ /**
+ * bssid_ignore - List of inacceptable BSSIDs
+ */
+ u8 *bssid_ignore;
+ size_t num_bssid_ignore;
+
+ /**
+ * bssid_accept - List of acceptable BSSIDs
+ */
+ u8 *bssid_accept;
+ size_t num_bssid_accept;
+
+ /**
+ * bssid_set - Whether BSSID is configured for this network
+ */
+ int bssid_set;
+
+ /**
+ * bssid_hint - BSSID hint
+ *
+ * If set, this is configured to the driver as a preferred initial BSSID
+ * while connecting to this network.
+ */
+ u8 bssid_hint[ETH_ALEN];
+
+ /**
+ * bssid_hint_set - Whether BSSID hint is configured for this network
+ */
+ int bssid_hint_set;
+
+ /**
+ * go_p2p_dev_addr - GO's P2P Device Address or all zeros if not set
+ */
+ u8 go_p2p_dev_addr[ETH_ALEN];
+
+ /**
+ * psk - WPA pre-shared key (256 bits)
+ */
+ u8 psk[32];
+
+ /**
+ * psk_set - Whether PSK field is configured
+ */
+ int psk_set;
+
+ /**
+ * passphrase - WPA ASCII passphrase
+ *
+ * If this is set, psk will be generated using the SSID and passphrase
+ * configured for the network. ASCII passphrase must be between 8 and
+ * 63 characters (inclusive).
+ */
+ char *passphrase;
+
+ /**
+ * sae_password - SAE password
+ *
+ * This parameter can be used to set a password for SAE. By default, the
+ * passphrase value is used if this separate parameter is not used, but
+ * passphrase follows the WPA-PSK constraints (8..63 characters) even
+ * though SAE passwords do not have such constraints.
+ */
+ char *sae_password;
+
+ /**
+ * sae_password_id - SAE password identifier
+ *
+ * This parameter can be used to identify a specific SAE password. If
+ * not included, the default SAE password is used instead.
+ */
+ char *sae_password_id;
+
+ struct sae_pt *pt;
+
+ /**
+ * ext_psk - PSK/passphrase name in external storage
+ *
+ * If this is set, PSK/passphrase will be fetched from external storage
+ * when requesting association with the network.
+ */
+ char *ext_psk;
+
+ /**
+ * mem_only_psk - Whether to keep PSK/passphrase only in memory
+ *
+ * 0 = allow psk/passphrase to be stored to the configuration file
+ * 1 = do not store psk/passphrase to the configuration file
+ */
+ int mem_only_psk;
+
+ /**
+ * pairwise_cipher - Bitfield of allowed pairwise ciphers, WPA_CIPHER_*
+ */
+ int pairwise_cipher;
+
+ /**
+ * group_cipher - Bitfield of allowed group ciphers, WPA_CIPHER_*
+ */
+ int group_cipher;
+
+ /**
+ * group_mgmt_cipher - Bitfield of allowed group management ciphers
+ *
+ * This is a bitfield of WPA_CIPHER_AES_128_CMAC and WPA_CIPHER_BIP_*
+ * values. If 0, no constraint is used for the cipher, i.e., whatever
+ * the AP uses is accepted.
+ */
+ int group_mgmt_cipher;
+
+ /**
+ * key_mgmt - Bitfield of allowed key management protocols
+ *
+ * WPA_KEY_MGMT_*
+ */
+ int key_mgmt;
+
+ /**
+ * bg_scan_period - Background scan period in seconds, 0 to disable, or
+ * -1 to indicate no change to default driver configuration
+ */
+ int bg_scan_period;
+
+ /**
+ * proto - Bitfield of allowed protocols, WPA_PROTO_*
+ */
+ int proto;
+
+ /**
+ * auth_alg - Bitfield of allowed authentication algorithms
+ *
+ * WPA_AUTH_ALG_*
+ */
+ int auth_alg;
+
+ /**
+ * scan_ssid - Scan this SSID with Probe Requests
+ *
+ * scan_ssid can be used to scan for APs using hidden SSIDs.
+ * Note: Many drivers do not support this. ap_mode=2 can be used with
+ * such drivers to use hidden SSIDs. Note2: Most nl80211-based drivers
+ * do support scan_ssid=1 and that should be used with them instead of
+ * ap_scan=2.
+ */
+ int scan_ssid;
+
+#ifdef IEEE8021X_EAPOL
+#define EAPOL_FLAG_REQUIRE_KEY_UNICAST BIT(0)
+#define EAPOL_FLAG_REQUIRE_KEY_BROADCAST BIT(1)
+ /**
+ * eapol_flags - Bit field of IEEE 802.1X/EAPOL options (EAPOL_FLAG_*)
+ */
+ int eapol_flags;
+
+ /**
+ * eap - EAP peer configuration for this network
+ */
+ struct eap_peer_config eap;
+#endif /* IEEE8021X_EAPOL */
+
+#ifdef CONFIG_WEP
+#define NUM_WEP_KEYS 4
+#define MAX_WEP_KEY_LEN 16
+ /**
+ * wep_key - WEP keys
+ */
+ u8 wep_key[NUM_WEP_KEYS][MAX_WEP_KEY_LEN];
+
+ /**
+ * wep_key_len - WEP key lengths
+ */
+ size_t wep_key_len[NUM_WEP_KEYS];
+
+ /**
+ * wep_tx_keyidx - Default key index for TX frames using WEP
+ */
+ int wep_tx_keyidx;
+#endif /* CONFIG_WEP */
+
+ /**
+ * proactive_key_caching - Enable proactive key caching
+ *
+ * This field can be used to enable proactive key caching which is also
+ * known as opportunistic PMKSA caching for WPA2. This is disabled (0)
+ * by default unless default value is changed with the global okc=1
+ * parameter. Enable by setting this to 1.
+ *
+ * Proactive key caching is used to make supplicant assume that the APs
+ * are using the same PMK and generate PMKSA cache entries without
+ * doing RSN pre-authentication. This requires support from the AP side
+ * and is normally used with wireless switches that co-locate the
+ * authenticator.
+ *
+ * Internally, special value -1 is used to indicate that the parameter
+ * was not specified in the configuration (i.e., default behavior is
+ * followed).
+ */
+ int proactive_key_caching;
+
+ /**
+ * mixed_cell - Whether mixed cells are allowed
+ *
+ * This option can be used to configure whether so called mixed cells,
+ * i.e., networks that use both plaintext and encryption in the same
+ * SSID, are allowed. This is disabled (0) by default. Enable by
+ * setting this to 1.
+ */
+ int mixed_cell;
+
+#ifdef IEEE8021X_EAPOL
+
+ /**
+ * leap - Number of EAP methods using LEAP
+ *
+ * This field should be set to 1 if LEAP is enabled. This is used to
+ * select IEEE 802.11 authentication algorithm.
+ */
+ int leap;
+
+ /**
+ * non_leap - Number of EAP methods not using LEAP
+ *
+ * This field should be set to >0 if any EAP method other than LEAP is
+ * enabled. This is used to select IEEE 802.11 authentication
+ * algorithm.
+ */
+ int non_leap;
+
+ /**
+ * eap_workaround - EAP workarounds enabled
+ *
+ * wpa_supplicant supports number of "EAP workarounds" to work around
+ * interoperability issues with incorrectly behaving authentication
+ * servers. This is recommended to be enabled by default because some
+ * of the issues are present in large number of authentication servers.
+ *
+ * Strict EAP conformance mode can be configured by disabling
+ * workarounds with eap_workaround = 0.
+ */
+ unsigned int eap_workaround;
+
+#endif /* IEEE8021X_EAPOL */
+
+ /**
+ * mode - IEEE 802.11 operation mode (Infrastucture/IBSS)
+ *
+ * 0 = infrastructure (Managed) mode, i.e., associate with an AP.
+ *
+ * 1 = IBSS (ad-hoc, peer-to-peer)
+ *
+ * 2 = AP (access point)
+ *
+ * 3 = P2P Group Owner (can be set in the configuration file)
+ *
+ * 4 = P2P Group Formation (used internally; not in configuration
+ * files)
+ *
+ * 5 = Mesh
+ *
+ * Note: IBSS can only be used with key_mgmt NONE (plaintext and static
+ * WEP) and WPA-PSK (with proto=RSN). In addition, key_mgmt=WPA-NONE
+ * (fixed group key TKIP/CCMP) is available for backwards compatibility,
+ * but its use is deprecated. WPA-None requires following network block
+ * options: proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or
+ * CCMP, but not both), and psk must also be set (either directly or
+ * using ASCII passphrase).
+ */
+ enum wpas_mode mode;
+
+ /**
+ * pbss - Whether to use PBSS. Relevant to DMG networks only.
+ * 0 = do not use PBSS
+ * 1 = use PBSS
+ * 2 = don't care (not allowed in AP mode)
+ * Used together with mode configuration. When mode is AP, it
+ * means to start a PCP instead of a regular AP. When mode is INFRA it
+ * means connect to a PCP instead of AP. In this mode you can also
+ * specify 2 (don't care) meaning connect to either AP or PCP.
+ * P2P_GO and P2P_GROUP_FORMATION modes must use PBSS in DMG network.
+ */
+ int pbss;
+
+ /**
+ * disabled - Whether this network is currently disabled
+ *
+ * 0 = this network can be used (default).
+ * 1 = this network block is disabled (can be enabled through
+ * ctrl_iface, e.g., with wpa_cli or wpa_gui).
+ * 2 = this network block includes parameters for a persistent P2P
+ * group (can be used with P2P ctrl_iface commands)
+ */
+ int disabled;
+
+ /**
+ * disabled_for_connect - Whether this network was temporarily disabled
+ *
+ * This flag is used to reenable all the temporarily disabled networks
+ * after either the success or failure of a WPS connection.
+ */
+ int disabled_for_connect;
+
+ /**
+ * id_str - Network identifier string for external scripts
+ *
+ * This value is passed to external ctrl_iface monitors in
+ * WPA_EVENT_CONNECTED event and wpa_cli sets this as WPA_ID_STR
+ * environment variable for action scripts.
+ */
+ char *id_str;
+
+ /**
+ * ieee80211w - Whether management frame protection is enabled
+ *
+ * This value is used to configure policy for management frame
+ * protection (IEEE 802.11w). 0 = disabled, 1 = optional, 2 = required.
+ * This is disabled by default unless the default value has been changed
+ * with the global pmf=1/2 parameter.
+ *
+ * Internally, special value 3 is used to indicate that the parameter
+ * was not specified in the configuration (i.e., default behavior is
+ * followed).
+ */
+ enum mfp_options ieee80211w;
+
+#ifdef CONFIG_OCV
+ /**
+ * ocv - Enable/disable operating channel validation
+ *
+ * If this parameter is set to 1, stations will exchange OCI element
+ * to cryptographically verify the operating channel. Setting this
+ * parameter to 0 disables this option. Default value: 0.
+ */
+ int ocv;
+#endif /* CONFIG_OCV */
+
+ /**
+ * frequency - Channel frequency in megahertz (MHz) for IBSS
+ *
+ * This value is used to configure the initial channel for IBSS (adhoc)
+ * networks, e.g., 2412 = IEEE 802.11b/g channel 1. It is ignored in
+ * the infrastructure mode. In addition, this value is only used by the
+ * station that creates the IBSS. If an IBSS network with the
+ * configured SSID is already present, the frequency of the network
+ * will be used instead of this configured value.
+ */
+ int frequency;
+
+ /**
+ * enable_edmg - Enable EDMG feature in STA/AP mode
+ *
+ * This flag is used for enabling the EDMG capability in STA/AP mode.
+ */
+ int enable_edmg;
+
+ /**
+ * edmg_channel - EDMG channel number
+ *
+ * This value is used to configure the EDMG channel bonding feature.
+ * In AP mode it defines the EDMG channel to start the AP on.
+ * in STA mode it defines the EDMG channel to use for connection
+ * (if supported by AP).
+ */
+ u8 edmg_channel;
+
+ /**
+ * fixed_freq - Use fixed frequency for IBSS
+ */
+ int fixed_freq;
+
+#ifdef CONFIG_ACS
+ /**
+ * ACS - Automatic Channel Selection for AP mode
+ *
+ * If present, it will be handled together with frequency.
+ * frequency will be used to determine hardware mode only, when it is
+ * used for both hardware mode and channel when used alone. This will
+ * force the channel to be set to 0, thus enabling ACS.
+ */
+ int acs;
+#endif /* CONFIG_ACS */
+
+ /**
+ * mesh_basic_rates - BSS Basic rate set for mesh network
+ *
+ */
+ int *mesh_basic_rates;
+
+ /**
+ * Mesh network plink parameters
+ */
+ int dot11MeshMaxRetries;
+ int dot11MeshRetryTimeout; /* msec */
+ int dot11MeshConfirmTimeout; /* msec */
+ int dot11MeshHoldingTimeout; /* msec */
+
+ /**
+ * Mesh network layer-2 forwarding (dot11MeshForwarding)
+ */
+ int mesh_fwding;
+
+ int ht;
+ int ht40;
+
+ int vht;
+
+ int he;
+
+ int max_oper_chwidth;
+
+ unsigned int vht_center_freq1;
+ unsigned int vht_center_freq2;
+
+ /**
+ * wpa_ptk_rekey - Maximum lifetime for PTK in seconds
+ *
+ * This value can be used to enforce rekeying of PTK to mitigate some
+ * attacks against TKIP deficiencies.
+ */
+ int wpa_ptk_rekey;
+
+ /** wpa_deny_ptk0_rekey - Control PTK0 rekeying
+ *
+ * Rekeying a pairwise key using only keyid 0 (PTK0 rekey) has many
+ * broken implementations and should be avoided when using or
+ * interacting with one.
+ *
+ * 0 = always rekey when configured/instructed
+ * 1 = only rekey when the local driver is explicitly indicating it can
+ * perform this operation without issues
+ * 2 = never allow PTK0 rekeys
+ */
+ enum ptk0_rekey_handling wpa_deny_ptk0_rekey;
+
+ /**
+ * group_rekey - Group rekeying time in seconds
+ *
+ * This value, if non-zero, is used as the dot11RSNAConfigGroupRekeyTime
+ * parameter when operating in Authenticator role in IBSS.
+ */
+ int group_rekey;
+
+ /**
+ * scan_freq - Array of frequencies to scan or %NULL for all
+ *
+ * This is an optional zero-terminated array of frequencies in
+ * megahertz (MHz) to include in scan requests when searching for this
+ * network. This can be used to speed up scanning when the network is
+ * known to not use all possible channels.
+ */
+ int *scan_freq;
+
+ /**
+ * bgscan - Background scan and roaming parameters or %NULL if none
+ *
+ * This is an optional set of parameters for background scanning and
+ * roaming within a network (ESS) in following format:
+ * <bgscan module name>:<module parameters>
+ */
+ char *bgscan;
+
+ /**
+ * ignore_broadcast_ssid - Hide SSID in AP mode
+ *
+ * Send empty SSID in beacons and ignore probe request frames that do
+ * not specify full SSID, i.e., require stations to know SSID.
+ * default: disabled (0)
+ * 1 = send empty (length=0) SSID in beacon and ignore probe request
+ * for broadcast SSID
+ * 2 = clear SSID (ASCII 0), but keep the original length (this may be
+ * required with some clients that do not support empty SSID) and
+ * ignore probe requests for broadcast SSID
+ */
+ int ignore_broadcast_ssid;
+
+ /**
+ * freq_list - Array of allowed frequencies or %NULL for all
+ *
+ * This is an optional zero-terminated array of frequencies in
+ * megahertz (MHz) to allow for selecting the BSS. If set, scan results
+ * that do not match any of the specified frequencies are not
+ * considered when selecting a BSS.
+ */
+ int *freq_list;
+
+ /**
+ * p2p_client_list - List of P2P Clients in a persistent group (GO)
+ *
+ * This is a list of P2P Clients (P2P Device Address) that have joined
+ * the persistent group. This is maintained on the GO for persistent
+ * group entries (disabled == 2).
+ */
+ u8 *p2p_client_list;
+
+ /**
+ * num_p2p_clients - Number of entries in p2p_client_list
+ */
+ size_t num_p2p_clients;
+
+#ifndef P2P_MAX_STORED_CLIENTS
+#define P2P_MAX_STORED_CLIENTS 100
+#endif /* P2P_MAX_STORED_CLIENTS */
+
+ /**
+ * psk_list - Per-client PSKs (struct psk_list_entry)
+ */
+ struct dl_list psk_list;
+
+ /**
+ * p2p_group - Network generated as a P2P group (used internally)
+ */
+ int p2p_group;
+
+ /**
+ * p2p_persistent_group - Whether this is a persistent group
+ */
+ int p2p_persistent_group;
+
+ /**
+ * temporary - Whether this network is temporary and not to be saved
+ */
+ int temporary;
+
+ /**
+ * export_keys - Whether keys may be exported
+ *
+ * This attribute will be set when keys are determined through
+ * WPS or similar so that they may be exported.
+ */
+ int export_keys;
+
+#ifdef CONFIG_HT_OVERRIDES
+ /**
+ * disable_ht - Disable HT (IEEE 802.11n) for this network
+ *
+ * By default, use it if it is available, but this can be configured
+ * to 1 to have it disabled.
+ */
+ int disable_ht;
+
+ /**
+ * disable_ht40 - Disable HT40 for this network
+ *
+ * By default, use it if it is available, but this can be configured
+ * to 1 to have it disabled.
+ */
+ int disable_ht40;
+
+ /**
+ * disable_sgi - Disable SGI (Short Guard Interval) for this network
+ *
+ * By default, use it if it is available, but this can be configured
+ * to 1 to have it disabled.
+ */
+ int disable_sgi;
+
+ /**
+ * disable_ldpc - Disable LDPC for this network
+ *
+ * By default, use it if it is available, but this can be configured
+ * to 1 to have it disabled.
+ */
+ int disable_ldpc;
+
+ /**
+ * ht40_intolerant - Indicate 40 MHz intolerant for this network
+ */
+ int ht40_intolerant;
+
+ /**
+ * disable_max_amsdu - Disable MAX A-MSDU
+ *
+ * A-MDSU will be 3839 bytes when disabled, or 7935
+ * when enabled (assuming it is otherwise supported)
+ * -1 (default) means do not apply any settings to the kernel.
+ */
+ int disable_max_amsdu;
+
+ /**
+ * ampdu_factor - Maximum A-MPDU Length Exponent
+ *
+ * Value: 0-3, see 7.3.2.56.3 in IEEE Std 802.11n-2009.
+ */
+ int ampdu_factor;
+
+ /**
+ * ampdu_density - Minimum A-MPDU Start Spacing
+ *
+ * Value: 0-7, see 7.3.2.56.3 in IEEE Std 802.11n-2009.
+ */
+ int ampdu_density;
+
+ /**
+ * ht_mcs - Allowed HT-MCS rates, in ASCII hex: ffff0000...
+ *
+ * By default (empty string): Use whatever the OS has configured.
+ */
+ char *ht_mcs;
+
+ /**
+ * tx_stbc - Indicate STBC support for TX streams
+ *
+ * Value: -1..1, by default (-1): use whatever the OS or card has
+ * configured. See IEEE Std 802.11-2016, 9.4.2.56.2.
+ */
+ int tx_stbc;
+
+ /**
+ * rx_stbc - Indicate STBC support for RX streams
+ *
+ * Value: -1..3, by default (-1): use whatever the OS or card has
+ * configured. See IEEE Std 802.11-2016, 9.4.2.56.2.
+ */
+ int rx_stbc;
+#endif /* CONFIG_HT_OVERRIDES */
+
+#ifdef CONFIG_VHT_OVERRIDES
+ /**
+ * disable_vht - Disable VHT (IEEE 802.11ac) for this network
+ *
+ * By default, use it if it is available, but this can be configured
+ * to 1 to have it disabled.
+ */
+ int disable_vht;
+
+ /**
+ * vht_capa - VHT capabilities to use
+ */
+ unsigned int vht_capa;
+
+ /**
+ * vht_capa_mask - mask for VHT capabilities
+ */
+ unsigned int vht_capa_mask;
+
+ int vht_rx_mcs_nss_1, vht_rx_mcs_nss_2,
+ vht_rx_mcs_nss_3, vht_rx_mcs_nss_4,
+ vht_rx_mcs_nss_5, vht_rx_mcs_nss_6,
+ vht_rx_mcs_nss_7, vht_rx_mcs_nss_8;
+ int vht_tx_mcs_nss_1, vht_tx_mcs_nss_2,
+ vht_tx_mcs_nss_3, vht_tx_mcs_nss_4,
+ vht_tx_mcs_nss_5, vht_tx_mcs_nss_6,
+ vht_tx_mcs_nss_7, vht_tx_mcs_nss_8;
+#endif /* CONFIG_VHT_OVERRIDES */
+
+#ifdef CONFIG_HE_OVERRIDES
+ /**
+ * disable_he - Disable HE (IEEE 802.11ax) for this network
+ *
+ * By default, use it if it is available, but this can be configured
+ * to 1 to have it disabled.
+ */
+ int disable_he;
+#endif /* CONFIG_HE_OVERRIDES */
+
+ /**
+ * ap_max_inactivity - Timeout in seconds to detect STA's inactivity
+ *
+ * This timeout value is used in AP mode to clean up inactive stations.
+ * By default: 300 seconds.
+ */
+ int ap_max_inactivity;
+
+ /**
+ * dtim_period - DTIM period in Beacon intervals
+ * By default: 2
+ */
+ int dtim_period;
+
+ /**
+ * beacon_int - Beacon interval (default: 100 TU)
+ */
+ int beacon_int;
+
+ /**
+ * auth_failures - Number of consecutive authentication failures
+ */
+ unsigned int auth_failures;
+
+ /**
+ * disabled_until - Network block disabled until this time if non-zero
+ */
+ struct os_reltime disabled_until;
+
+ /**
+ * parent_cred - Pointer to parent wpa_cred entry
+ *
+ * This pointer can be used to delete temporary networks when a wpa_cred
+ * that was used to create them is removed. This pointer should not be
+ * dereferences since it may not be updated in all cases.
+ */
+ void *parent_cred;
+
+#ifdef CONFIG_MACSEC
+ /**
+ * macsec_policy - Determines the policy for MACsec secure session
+ *
+ * 0: MACsec not in use (default)
+ * 1: MACsec enabled - Should secure, accept key server's advice to
+ * determine whether to use a secure session or not.
+ */
+ int macsec_policy;
+
+ /**
+ * macsec_integ_only - Determines how MACsec are transmitted
+ *
+ * This setting applies only when MACsec is in use, i.e.,
+ * - macsec_policy is enabled
+ * - the key server has decided to enable MACsec
+ *
+ * 0: Encrypt traffic (default)
+ * 1: Integrity only
+ */
+ int macsec_integ_only;
+
+ /**
+ * macsec_replay_protect - Enable MACsec replay protection
+ *
+ * This setting applies only when MACsec is in use, i.e.,
+ * - macsec_policy is enabled
+ * - the key server has decided to enable MACsec
+ *
+ * 0: Replay protection disabled (default)
+ * 1: Replay protection enabled
+ */
+ int macsec_replay_protect;
+
+ /**
+ * macsec_replay_window - MACsec replay protection window
+ *
+ * A window in which replay is tolerated, to allow receipt of frames
+ * that have been misordered by the network.
+ *
+ * This setting applies only when MACsec replay protection active, i.e.,
+ * - macsec_replay_protect is enabled
+ * - the key server has decided to enable MACsec
+ *
+ * 0: No replay window, strict check (default)
+ * 1..2^32-1: number of packets that could be misordered
+ */
+ u32 macsec_replay_window;
+
+ /**
+ * macsec_port - MACsec port (in SCI)
+ *
+ * Port component of the SCI.
+ *
+ * Range: 1-65534 (default: 1)
+ */
+ int macsec_port;
+
+ /**
+ * mka_priority - Priority of MKA Actor
+ *
+ * Range: 0-255 (default: 255)
+ */
+ int mka_priority;
+
+ /**
+ * mka_ckn - MKA pre-shared CKN
+ */
+#define MACSEC_CKN_MAX_LEN 32
+ size_t mka_ckn_len;
+ u8 mka_ckn[MACSEC_CKN_MAX_LEN];
+
+ /**
+ * mka_cak - MKA pre-shared CAK
+ */
+#define MACSEC_CAK_MAX_LEN 32
+ size_t mka_cak_len;
+ u8 mka_cak[MACSEC_CAK_MAX_LEN];
+
+#define MKA_PSK_SET_CKN BIT(0)
+#define MKA_PSK_SET_CAK BIT(1)
+#define MKA_PSK_SET (MKA_PSK_SET_CKN | MKA_PSK_SET_CAK)
+ /**
+ * mka_psk_set - Whether mka_ckn and mka_cak are set
+ */
+ u8 mka_psk_set;
+#endif /* CONFIG_MACSEC */
+
+#ifdef CONFIG_HS20
+ int update_identifier;
+
+ /**
+ * roaming_consortium_selection - Roaming Consortium Selection
+ *
+ * The matching Roaming Consortium OI that was used to generate this
+ * network profile.
+ */
+ u8 *roaming_consortium_selection;
+
+ /**
+ * roaming_consortium_selection_len - roaming_consortium_selection len
+ */
+ size_t roaming_consortium_selection_len;
+#endif /* CONFIG_HS20 */
+
+ unsigned int wps_run;
+
+ /**
+ * mac_addr - MAC address policy
+ *
+ * 0 = use permanent MAC address
+ * 1 = use random MAC address for each ESS connection
+ * 2 = like 1, but maintain OUI (with local admin bit set)
+ *
+ * Internally, special value -1 is used to indicate that the parameter
+ * was not specified in the configuration (i.e., default behavior is
+ * followed).
+ */
+ int mac_addr;
+
+ /**
+ * no_auto_peer - Do not automatically peer with compatible mesh peers
+ *
+ * When unset, the reception of a beacon from a another mesh peer in
+ * this MBSS will trigger a peering attempt.
+ */
+ int no_auto_peer;
+
+ /**
+ * mesh_rssi_threshold - Set mesh parameter mesh_rssi_threshold (dBm)
+ *
+ * -255..-1 = threshold value in dBm
+ * 0 = not using RSSI threshold
+ * 1 = do not change driver default
+ */
+ int mesh_rssi_threshold;
+
+ /**
+ * wps_disabled - WPS disabled in AP mode
+ *
+ * 0 = WPS enabled and configured (default)
+ * 1 = WPS disabled
+ */
+ int wps_disabled;
+
+ /**
+ * fils_dh_group - FILS DH Group
+ *
+ * 0 = PFS disabled with FILS shared key authentication
+ * 1-65535 DH Group to use for FILS PFS
+ */
+ int fils_dh_group;
+
+ /**
+ * dpp_connector - DPP Connector (signedConnector as string)
+ */
+ char *dpp_connector;
+
+ /**
+ * dpp_netaccesskey - DPP netAccessKey (own private key)
+ */
+ u8 *dpp_netaccesskey;
+
+ /**
+ * dpp_netaccesskey_len - DPP netAccessKey length in octets
+ */
+ size_t dpp_netaccesskey_len;
+
+ /**
+ * net_access_key_expiry - DPP netAccessKey expiry in UNIX time stamp
+ *
+ * 0 indicates no expiration.
+ */
+ unsigned int dpp_netaccesskey_expiry;
+
+ /**
+ * dpp_csign - C-sign-key (Configurator public key)
+ */
+ u8 *dpp_csign;
+
+ /**
+ * dpp_csign_len - C-sign-key length in octets
+ */
+ size_t dpp_csign_len;
+
+ /**
+ * dpp_pp_key - ppKey (Configurator privacy protection public key)
+ */
+ u8 *dpp_pp_key;
+
+ /**
+ * dpp_pp_key_len - ppKey length in octets
+ */
+ size_t dpp_pp_key_len;
+
+ /**
+ * dpp_pfs - DPP PFS
+ * 0: allow PFS to be used or not used
+ * 1: require PFS to be used (note: not compatible with DPP R1)
+ * 2: do not allow PFS to be used
+ */
+ int dpp_pfs;
+
+ /**
+ * dpp_pfs_fallback - DPP PFS fallback selection
+ *
+ * This is an internally used variable (i.e., not used in external
+ * configuration) to track state of the DPP PFS fallback mechanism.
+ */
+ int dpp_pfs_fallback;
+
+ /**
+ * owe_group - OWE DH Group
+ *
+ * 0 = use default (19) first and then try all supported groups one by
+ * one if AP rejects the selected group
+ * 1-65535 DH Group to use for OWE
+ *
+ * Groups 19 (NIST P-256), 20 (NIST P-384), and 21 (NIST P-521) are
+ * currently supported.
+ */
+ int owe_group;
+
+ /**
+ * owe_only - OWE-only mode (disable transition mode)
+ *
+ * 0 = enable transition mode (allow connection to either OWE or open
+ * BSS)
+ * 1 = disable transition mode (allow connection only with OWE)
+ */
+ int owe_only;
+
+ /**
+ * owe_ptk_workaround - OWE PTK derivation workaround
+ *
+ * Initial OWE implementation used SHA256 when deriving the PTK for all
+ * OWE groups. This was supposed to change to SHA384 for group 20 and
+ * SHA512 for group 21. This parameter can be used to enable older
+ * behavior mainly for testing purposes. There is no impact to group 19
+ * behavior, but if enabled, this will make group 20 and 21 cases use
+ * SHA256-based PTK derivation which will not work with the updated
+ * OWE implementation on the AP side.
+ */
+ int owe_ptk_workaround;
+
+ /**
+ * owe_transition_bss_select_count - OWE transition BSS select count
+ *
+ * This is an internally used variable (i.e., not used in external
+ * configuration) to track the number of selection attempts done for
+ * OWE BSS in transition mode. This allows fallback to an open BSS if
+ * the selection attempts for OWE BSS exceed the configured threshold.
+ */
+ int owe_transition_bss_select_count;
+
+ /**
+ * multi_ap_backhaul_sta - Multi-AP backhaul STA
+ * 0 = normal (non-Multi-AP) station
+ * 1 = Multi-AP backhaul station
+ */
+ int multi_ap_backhaul_sta;
+
+ /**
+ * ft_eap_pmksa_caching - Whether FT-EAP PMKSA caching is allowed
+ * 0 = do not try to use PMKSA caching with FT-EAP
+ * 1 = try to use PMKSA caching with FT-EAP
+ *
+ * This controls whether to try to use PMKSA caching with FT-EAP for the
+ * FT initial mobility domain association.
+ */
+ int ft_eap_pmksa_caching;
+
+ /**
+ * beacon_prot - Whether Beacon protection is enabled
+ *
+ * This depends on management frame protection (ieee80211w) being
+ * enabled.
+ */
+ int beacon_prot;
+
+ /**
+ * transition_disable - Transition Disable indication
+ * The AP can notify authenticated stations to disable transition mode
+ * in their network profiles when the network has completed transition
+ * steps, i.e., once sufficiently large number of APs in the ESS have
+ * been updated to support the more secure alternative. When this
+ * indication is used, the stations are expected to automatically
+ * disable transition mode and less secure security options. This
+ * includes use of WEP, TKIP (including use of TKIP as the group
+ * cipher), and connections without PMF.
+ * Bitmap bits:
+ * bit 0 (0x01): WPA3-Personal (i.e., disable WPA2-Personal = WPA-PSK
+ * and only allow SAE to be used)
+ * bit 1 (0x02): SAE-PK (disable SAE without use of SAE-PK)
+ * bit 2 (0x04): WPA3-Enterprise (move to requiring PMF)
+ * bit 3 (0x08): Enhanced Open (disable use of open network; require
+ * OWE)
+ */
+ u8 transition_disable;
+
+ /**
+ * sae_pk - SAE-PK mode
+ * 0 = automatic SAE/SAE-PK selection based on password; enable
+ * transition mode (allow SAE authentication without SAE-PK)
+ * 1 = SAE-PK only (disable transition mode; allow SAE authentication
+ * only with SAE-PK)
+ * 2 = disable SAE-PK (allow SAE authentication only without SAE-PK)
+ */
+ enum sae_pk_mode sae_pk;
+
+ /**
+ * was_recently_reconfigured - Whether this SSID config has been changed
+ * recently
+ *
+ * This is an internally used variable, i.e., not used in external
+ * configuration.
+ */
+ bool was_recently_reconfigured;
+
+ /**
+ * sae_pwe - SAE mechanism for PWE derivation
+ *
+ * Internally, special value 4 (DEFAULT_SAE_PWE) is used to indicate
+ * that the parameter is not set and the global sae_pwe value needs to
+ * be considered.
+ *
+ * 0 = hunting-and-pecking loop only
+ * 1 = hash-to-element only
+ * 2 = both hunting-and-pecking loop and hash-to-element enabled
+ */
+ int sae_pwe;
+};
+
+#endif /* CONFIG_SSID_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/ctrl_iface.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/ctrl_iface.h
new file mode 100755
index 0000000..dfbd25a
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/ctrl_iface.h
@@ -0,0 +1,167 @@
+/*
+ * WPA Supplicant / UNIX domain socket -based control interface
+ * Copyright (c) 2004-2020, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef CTRL_IFACE_H
+#define CTRL_IFACE_H
+
+#ifdef CONFIG_CTRL_IFACE
+
+#ifndef CTRL_IFACE_MAX_LEN
+#define CTRL_IFACE_MAX_LEN 8192
+#endif /* CTRL_IFACE_MAX_LEN */
+
+/* Shared functions from ctrl_iface.c; to be called by ctrl_iface backends */
+
+/**
+ * wpa_supplicant_ctrl_iface_process - Process ctrl_iface command
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @buf: Received command buffer (nul terminated string)
+ * @resp_len: Variable to be set to the response length
+ * Returns: Response (*resp_len bytes) or %NULL on failure
+ *
+ * Control interface backends call this function when receiving a message that
+ * they do not process internally, i.e., anything else than ATTACH, DETACH,
+ * and LEVEL. The return response value is then sent to the external program
+ * that sent the command. Caller is responsible for freeing the buffer after
+ * this. If %NULL is returned, *resp_len can be set to two special values:
+ * 1 = send "FAIL\n" response, 2 = send "OK\n" response. If *resp_len has any
+ * other value, no response is sent.
+ */
+char * wpa_supplicant_ctrl_iface_process(struct wpa_supplicant *wpa_s,
+ char *buf, size_t *resp_len);
+
+/**
+ * wpa_supplicant_global_ctrl_iface_process - Process global ctrl_iface command
+ * @global: Pointer to global data from wpa_supplicant_init()
+ * @buf: Received command buffer (nul terminated string)
+ * @resp_len: Variable to be set to the response length
+ * Returns: Response (*resp_len bytes) or %NULL on failure
+ *
+ * Control interface backends call this function when receiving a message from
+ * the global ctrl_iface connection. The return response value is then sent to
+ * the external program that sent the command. Caller is responsible for
+ * freeing the buffer after this. If %NULL is returned, *resp_len can be set to
+ * two special values: 1 = send "FAIL\n" response, 2 = send "OK\n" response. If
+ * *resp_len has any other value, no response is sent.
+ */
+char * wpa_supplicant_global_ctrl_iface_process(struct wpa_global *global,
+ char *buf, size_t *resp_len);
+
+
+/* Functions that each ctrl_iface backend must implement */
+
+/**
+ * wpa_supplicant_ctrl_iface_init - Initialize control interface
+ * @wpa_s: Pointer to wpa_supplicant data
+ * Returns: Pointer to private data on success, %NULL on failure
+ *
+ * Initialize the control interface and start receiving commands from external
+ * programs.
+ *
+ * Required to be implemented in each control interface backend.
+ */
+struct ctrl_iface_priv *
+wpa_supplicant_ctrl_iface_init(struct wpa_supplicant *wpa_s);
+
+/**
+ * wpa_supplicant_ctrl_iface_deinit - Deinitialize control interface
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @priv: Pointer to private data from wpa_supplicant_ctrl_iface_init()
+ *
+ * Deinitialize the control interface that was initialized with
+ * wpa_supplicant_ctrl_iface_init() and any data related to the wpa_s instance.
+ * @priv may be %NULL if the control interface has not yet been initialized.
+ *
+ * Required to be implemented in each control interface backend.
+ */
+void wpa_supplicant_ctrl_iface_deinit(struct wpa_supplicant *wpa_s,
+ struct ctrl_iface_priv *priv);
+
+/**
+ * wpa_supplicant_ctrl_iface_wait - Wait for ctrl_iface monitor
+ * @priv: Pointer to private data from wpa_supplicant_ctrl_iface_init()
+ *
+ * Wait until the first message from an external program using the control
+ * interface is received. This function can be used to delay normal startup
+ * processing to allow control interface programs to attach with
+ * %wpa_supplicant before normal operations are started.
+ *
+ * Required to be implemented in each control interface backend.
+ */
+void wpa_supplicant_ctrl_iface_wait(struct ctrl_iface_priv *priv);
+
+/**
+ * wpa_supplicant_global_ctrl_iface_init - Initialize global control interface
+ * @global: Pointer to global data from wpa_supplicant_init()
+ * Returns: Pointer to private data on success, %NULL on failure
+ *
+ * Initialize the global control interface and start receiving commands from
+ * external programs.
+ *
+ * Required to be implemented in each control interface backend.
+ */
+struct ctrl_iface_global_priv *
+wpa_supplicant_global_ctrl_iface_init(struct wpa_global *global);
+
+/**
+ * wpa_supplicant_global_ctrl_iface_deinit - Deinitialize global ctrl interface
+ * @priv: Pointer to private data from wpa_supplicant_global_ctrl_iface_init()
+ *
+ * Deinitialize the global control interface that was initialized with
+ * wpa_supplicant_global_ctrl_iface_init().
+ *
+ * Required to be implemented in each control interface backend.
+ */
+void wpa_supplicant_global_ctrl_iface_deinit(
+ struct ctrl_iface_global_priv *priv);
+
+void wpas_ctrl_radio_work_flush(struct wpa_supplicant *wpa_s);
+
+#else /* CONFIG_CTRL_IFACE */
+
+static inline struct ctrl_iface_priv *
+wpa_supplicant_ctrl_iface_init(struct wpa_supplicant *wpa_s)
+{
+ return (void *) -1;
+}
+
+static inline void
+wpa_supplicant_ctrl_iface_deinit(struct wpa_supplicant *wpa_s,
+ struct ctrl_iface_priv *priv)
+{
+}
+
+static inline void
+wpa_supplicant_ctrl_iface_send(struct ctrl_iface_priv *priv, int level,
+ char *buf, size_t len)
+{
+}
+
+static inline void
+wpa_supplicant_ctrl_iface_wait(struct ctrl_iface_priv *priv)
+{
+}
+
+static inline struct ctrl_iface_global_priv *
+wpa_supplicant_global_ctrl_iface_init(struct wpa_global *global)
+{
+ return (void *) 1;
+}
+
+static inline void
+wpa_supplicant_global_ctrl_iface_deinit(struct ctrl_iface_global_priv *priv)
+{
+}
+
+static inline void wpas_ctrl_radio_work_flush(struct wpa_supplicant *wpa_s)
+{
+}
+
+#endif /* CONFIG_CTRL_IFACE */
+
+#endif /* CTRL_IFACE_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus-wpa_supplicant.conf b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus-wpa_supplicant.conf
new file mode 100755
index 0000000..e81b495
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus-wpa_supplicant.conf
@@ -0,0 +1,17 @@
+<!DOCTYPE busconfig PUBLIC
+ "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
+ "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
+<busconfig>
+ <policy user="root">
+ <allow own="fi.w1.wpa_supplicant1"/>
+
+ <allow send_destination="fi.w1.wpa_supplicant1"/>
+ <allow send_interface="fi.w1.wpa_supplicant1"/>
+ <allow receive_sender="fi.w1.wpa_supplicant1" receive_type="signal"/>
+ </policy>
+ <policy context="default">
+ <deny own="fi.w1.wpa_supplicant1"/>
+ <deny send_destination="fi.w1.wpa_supplicant1"/>
+ <deny receive_sender="fi.w1.wpa_supplicant1" receive_type="signal"/>
+ </policy>
+</busconfig>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_common.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_common.h
new file mode 100755
index 0000000..aea7db7
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_common.h
@@ -0,0 +1,20 @@
+/*
+ * wpa_supplicant D-Bus control interface - common definitions
+ * Copyright (c) 2006, Dan Williams <dcbw@redhat.com> and Red Hat, Inc.
+ * Copyright (c) 2009, Witold Sowa <witold.sowa@gmail.com>
+ * Copyright (c) 2009, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef DBUS_COMMON_H
+#define DBUS_COMMON_H
+
+struct wpas_dbus_priv;
+struct wpa_global;
+
+struct wpas_dbus_priv * wpas_dbus_init(struct wpa_global *global);
+void wpas_dbus_deinit(struct wpas_dbus_priv *priv);
+
+#endif /* DBUS_COMMON_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_common_i.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_common_i.h
new file mode 100755
index 0000000..95eb4bc
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_common_i.h
@@ -0,0 +1,34 @@
+/*
+ * wpa_supplicant D-Bus control interface - internal definitions
+ * Copyright (c) 2006, Dan Williams <dcbw@redhat.com> and Red Hat, Inc.
+ * Copyright (c) 2009, Witold Sowa <witold.sowa@gmail.com>
+ * Copyright (c) 2009, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef DBUS_COMMON_I_H
+#define DBUS_COMMON_I_H
+
+#include <dbus/dbus.h>
+
+struct wpa_dbus_property_desc;
+
+struct wpas_dbus_priv {
+ DBusConnection *con;
+ int should_dispatch;
+ struct wpa_global *global;
+ u32 next_objid;
+ int dbus_new_initialized;
+
+#if defined(CONFIG_CTRL_IFACE_DBUS_NEW)
+ struct wpa_dbus_property_desc *all_interface_properties;
+ int globals_start;
+#if defined(CONFIG_AP)
+ int dbus_noc_refcnt;
+#endif /* CONFIG_AP */
+#endif /* CONFIG_CTRL_IFACE_DBUS_NEW */
+};
+
+#endif /* DBUS_COMMON_I_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_dict_helpers.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_dict_helpers.h
new file mode 100755
index 0000000..94a0efd
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_dict_helpers.h
@@ -0,0 +1,152 @@
+/*
+ * WPA Supplicant / dbus-based control interface
+ * Copyright (c) 2006, Dan Williams <dcbw@redhat.com> and Red Hat, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef DBUS_DICT_HELPERS_H
+#define DBUS_DICT_HELPERS_H
+
+#include "wpabuf.h"
+
+/*
+ * Adding a dict to a DBusMessage
+ */
+
+dbus_bool_t wpa_dbus_dict_open_write(DBusMessageIter *iter,
+ DBusMessageIter *iter_dict);
+
+dbus_bool_t wpa_dbus_dict_close_write(DBusMessageIter *iter,
+ DBusMessageIter *iter_dict);
+
+const char * wpa_dbus_type_as_string(const int type);
+
+dbus_bool_t wpa_dbus_dict_append_string(DBusMessageIter *iter_dict,
+ const char *key, const char *value);
+
+dbus_bool_t wpa_dbus_dict_append_bool(DBusMessageIter *iter_dict,
+ const char *key,
+ const dbus_bool_t value);
+
+dbus_bool_t wpa_dbus_dict_append_int16(DBusMessageIter *iter_dict,
+ const char *key,
+ const dbus_int16_t value);
+
+dbus_bool_t wpa_dbus_dict_append_uint16(DBusMessageIter *iter_dict,
+ const char *key,
+ const dbus_uint16_t value);
+
+dbus_bool_t wpa_dbus_dict_append_int32(DBusMessageIter *iter_dict,
+ const char *key,
+ const dbus_int32_t value);
+
+dbus_bool_t wpa_dbus_dict_append_uint32(DBusMessageIter *iter_dict,
+ const char *key,
+ const dbus_uint32_t value);
+
+dbus_bool_t wpa_dbus_dict_append_object_path(DBusMessageIter *iter_dict,
+ const char *key,
+ const char *value);
+
+dbus_bool_t wpa_dbus_dict_append_byte_array(DBusMessageIter *iter_dict,
+ const char *key,
+ const char *value,
+ const dbus_uint32_t value_len);
+
+/* Manual construction and addition of array elements */
+dbus_bool_t wpa_dbus_dict_begin_array(DBusMessageIter *iter_dict,
+ const char *key, const char *type,
+ DBusMessageIter *iter_dict_entry,
+ DBusMessageIter *iter_dict_val,
+ DBusMessageIter *iter_array);
+
+dbus_bool_t wpa_dbus_dict_begin_string_array(DBusMessageIter *iter_dict,
+ const char *key,
+ DBusMessageIter *iter_dict_entry,
+ DBusMessageIter *iter_dict_val,
+ DBusMessageIter *iter_array);
+
+dbus_bool_t wpa_dbus_dict_string_array_add_element(DBusMessageIter *iter_array,
+ const char *elem);
+
+dbus_bool_t wpa_dbus_dict_bin_array_add_element(DBusMessageIter *iter_array,
+ const u8 *value,
+ size_t value_len);
+
+dbus_bool_t wpa_dbus_dict_end_array(DBusMessageIter *iter_dict,
+ DBusMessageIter *iter_dict_entry,
+ DBusMessageIter *iter_dict_val,
+ DBusMessageIter *iter_array);
+
+static inline dbus_bool_t
+wpa_dbus_dict_end_string_array(DBusMessageIter *iter_dict,
+ DBusMessageIter *iter_dict_entry,
+ DBusMessageIter *iter_dict_val,
+ DBusMessageIter *iter_array)
+{
+ return wpa_dbus_dict_end_array(iter_dict, iter_dict_entry,
+ iter_dict_val, iter_array);
+}
+
+/* Convenience function to add a whole string list */
+dbus_bool_t wpa_dbus_dict_append_string_array(DBusMessageIter *iter_dict,
+ const char *key,
+ const char **items,
+ const dbus_uint32_t num_items);
+
+dbus_bool_t wpa_dbus_dict_append_wpabuf_array(DBusMessageIter *iter_dict,
+ const char *key,
+ const struct wpabuf **items,
+ const dbus_uint32_t num_items);
+
+/*
+ * Reading a dict from a DBusMessage
+ */
+
+/*
+ * Used only in struct wpa_dbus_dict_entry::array_type internally to identify
+ * special binary array case.
+ */
+#define WPAS_DBUS_TYPE_BINARRAY ((int) '@')
+
+struct wpa_dbus_dict_entry {
+ int type; /** the dbus type of the dict entry's value */
+ int array_type; /** the dbus type of the array elements if the dict
+ entry value contains an array, or the special
+ WPAS_DBUS_TYPE_BINARRAY */
+ const char *key; /** key of the dict entry */
+
+ /** Possible values of the property */
+ union {
+ char *str_value;
+ char byte_value;
+ dbus_bool_t bool_value;
+ dbus_int16_t int16_value;
+ dbus_uint16_t uint16_value;
+ dbus_int32_t int32_value;
+ dbus_uint32_t uint32_value;
+ dbus_int64_t int64_value;
+ dbus_uint64_t uint64_value;
+ double double_value;
+ char *bytearray_value;
+ char **strarray_value;
+ struct wpabuf **binarray_value;
+ };
+ dbus_uint32_t array_len; /** length of the array if the dict entry's
+ value contains an array */
+};
+
+dbus_bool_t wpa_dbus_dict_open_read(DBusMessageIter *iter,
+ DBusMessageIter *iter_dict,
+ DBusError *error);
+
+dbus_bool_t wpa_dbus_dict_get_entry(DBusMessageIter *iter_dict,
+ struct wpa_dbus_dict_entry *entry);
+
+dbus_bool_t wpa_dbus_dict_has_dict_entry(DBusMessageIter *iter_dict);
+
+void wpa_dbus_dict_entry_clear(struct wpa_dbus_dict_entry *entry);
+
+#endif /* DBUS_DICT_HELPERS_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_new.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_new.h
new file mode 100755
index 0000000..26bdcb5
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_new.h
@@ -0,0 +1,648 @@
+/*
+ * WPA Supplicant / dbus-based control interface
+ * Copyright (c) 2006, Dan Williams <dcbw@redhat.com> and Red Hat, Inc.
+ * Copyright (c) 2009-2010, Witold Sowa <witold.sowa@gmail.com>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef CTRL_IFACE_DBUS_NEW_H
+#define CTRL_IFACE_DBUS_NEW_H
+
+#include "common/defs.h"
+#include "p2p/p2p.h"
+
+struct wpa_global;
+struct wpa_supplicant;
+struct wpa_ssid;
+struct wpa_cred;
+struct wpa_bss;
+struct wps_event_m2d;
+struct wps_event_fail;
+struct wps_credential;
+
+enum wpas_dbus_prop {
+ WPAS_DBUS_PROP_AP_SCAN,
+ WPAS_DBUS_PROP_SCANNING,
+ WPAS_DBUS_PROP_STATE,
+ WPAS_DBUS_PROP_CURRENT_BSS,
+ WPAS_DBUS_PROP_CURRENT_NETWORK,
+ WPAS_DBUS_PROP_CURRENT_AUTH_MODE,
+ WPAS_DBUS_PROP_BSSS,
+ WPAS_DBUS_PROP_STATIONS,
+ WPAS_DBUS_PROP_DISCONNECT_REASON,
+ WPAS_DBUS_PROP_AUTH_STATUS_CODE,
+ WPAS_DBUS_PROP_ASSOC_STATUS_CODE,
+ WPAS_DBUS_PROP_ROAM_TIME,
+ WPAS_DBUS_PROP_ROAM_COMPLETE,
+ WPAS_DBUS_PROP_SESSION_LENGTH,
+ WPAS_DBUS_PROP_BSS_TM_STATUS,
+};
+
+enum wpas_dbus_bss_prop {
+ WPAS_DBUS_BSS_PROP_SIGNAL,
+ WPAS_DBUS_BSS_PROP_FREQ,
+ WPAS_DBUS_BSS_PROP_MODE,
+ WPAS_DBUS_BSS_PROP_PRIVACY,
+ WPAS_DBUS_BSS_PROP_RATES,
+ WPAS_DBUS_BSS_PROP_WPA,
+ WPAS_DBUS_BSS_PROP_RSN,
+ WPAS_DBUS_BSS_PROP_WPS,
+ WPAS_DBUS_BSS_PROP_IES,
+ WPAS_DBUS_BSS_PROP_AGE,
+};
+
+enum wpas_dbus_sta_prop {
+ WPAS_DBUS_STA_PROP_ADDRESS,
+};
+
+#define WPAS_DBUS_OBJECT_PATH_MAX 150
+
+#define WPAS_DBUS_NEW_SERVICE "fi.w1.wpa_supplicant1"
+#define WPAS_DBUS_NEW_PATH "/fi/w1/wpa_supplicant1"
+#define WPAS_DBUS_NEW_INTERFACE "fi.w1.wpa_supplicant1"
+
+#define WPAS_DBUS_NEW_PATH_INTERFACES WPAS_DBUS_NEW_PATH "/Interfaces"
+#define WPAS_DBUS_NEW_IFACE_INTERFACE WPAS_DBUS_NEW_INTERFACE ".Interface"
+#define WPAS_DBUS_NEW_IFACE_WPS WPAS_DBUS_NEW_IFACE_INTERFACE ".WPS"
+
+#define WPAS_DBUS_NEW_NETWORKS_PART "Networks"
+#define WPAS_DBUS_NEW_IFACE_NETWORK WPAS_DBUS_NEW_INTERFACE ".Network"
+
+#define WPAS_DBUS_NEW_BSSIDS_PART "BSSs"
+#define WPAS_DBUS_NEW_IFACE_BSS WPAS_DBUS_NEW_INTERFACE ".BSS"
+
+#define WPAS_DBUS_NEW_STAS_PART "Stations"
+#define WPAS_DBUS_NEW_IFACE_STA WPAS_DBUS_NEW_INTERFACE ".Station"
+
+#define WPAS_DBUS_NEW_IFACE_P2PDEVICE \
+ WPAS_DBUS_NEW_IFACE_INTERFACE ".P2PDevice"
+
+#define WPAS_DBUS_NEW_IFACE_MESH WPAS_DBUS_NEW_IFACE_INTERFACE ".Mesh"
+
+/*
+ * Groups correspond to P2P groups where this device is a GO (owner)
+ */
+#define WPAS_DBUS_NEW_P2P_GROUPS_PART "Groups"
+#define WPAS_DBUS_NEW_IFACE_P2P_GROUP WPAS_DBUS_NEW_INTERFACE ".Group"
+
+/*
+ * Different dbus object for persistent groups so they do not get confused
+ * with regular (configured) network objects.
+ */
+#define WPAS_DBUS_NEW_PERSISTENT_GROUPS_PART "PersistentGroups"
+#define WPAS_DBUS_NEW_IFACE_PERSISTENT_GROUP \
+ WPAS_DBUS_NEW_INTERFACE ".PersistentGroup"
+
+#define WPAS_DBUS_NEW_P2P_PEERS_PART "Peers"
+#define WPAS_DBUS_NEW_IFACE_P2P_PEER WPAS_DBUS_NEW_INTERFACE ".Peer"
+
+#define WPAS_DBUS_NEW_CREDENTIALS_PART "Credentials"
+#define WPAS_DBUS_NEW_IFACE_CREDENTIAL WPAS_DBUS_NEW_INTERFACE ".Credential"
+
+/* Top-level Errors */
+#define WPAS_DBUS_ERROR_UNKNOWN_ERROR \
+ WPAS_DBUS_NEW_INTERFACE ".UnknownError"
+#define WPAS_DBUS_ERROR_INVALID_ARGS \
+ WPAS_DBUS_NEW_INTERFACE ".InvalidArgs"
+
+#define WPAS_DBUS_ERROR_IFACE_EXISTS \
+ WPAS_DBUS_NEW_INTERFACE ".InterfaceExists"
+#define WPAS_DBUS_ERROR_IFACE_DISABLED \
+ WPAS_DBUS_NEW_INTERFACE ".InterfaceDisabled"
+#define WPAS_DBUS_ERROR_IFACE_UNKNOWN \
+ WPAS_DBUS_NEW_INTERFACE ".InterfaceUnknown"
+
+#define WPAS_DBUS_ERROR_NOT_CONNECTED \
+ WPAS_DBUS_NEW_INTERFACE ".NotConnected"
+#define WPAS_DBUS_ERROR_NETWORK_UNKNOWN \
+ WPAS_DBUS_NEW_INTERFACE ".NetworkUnknown"
+
+#define WPAS_DBUS_ERROR_CONNECT_CHANNEL_UNAVAILABLE \
+ WPAS_DBUS_NEW_INTERFACE ".ConnectChannelUnavailable"
+#define WPAS_DBUS_ERROR_CONNECT_CHANNEL_UNSUPPORTED \
+ WPAS_DBUS_NEW_INTERFACE ".ConnectChannelUnsupported"
+#define WPAS_DBUS_ERROR_CONNECT_UNSPECIFIED_ERROR \
+ WPAS_DBUS_NEW_INTERFACE ".ConnectUnspecifiedError"
+
+#define WPAS_DBUS_ERROR_BLOB_EXISTS \
+ WPAS_DBUS_NEW_INTERFACE ".BlobExists"
+#define WPAS_DBUS_ERROR_BLOB_UNKNOWN \
+ WPAS_DBUS_NEW_INTERFACE ".BlobUnknown"
+
+#define WPAS_DBUS_ERROR_SUBSCRIPTION_IN_USE \
+ WPAS_DBUS_NEW_INTERFACE ".SubscriptionInUse"
+#define WPAS_DBUS_ERROR_NO_SUBSCRIPTION \
+ WPAS_DBUS_NEW_INTERFACE ".NoSubscription"
+#define WPAS_DBUS_ERROR_SUBSCRIPTION_EPERM \
+ WPAS_DBUS_NEW_INTERFACE ".SubscriptionNotYou"
+
+/* Interface-level errors */
+#define WPAS_DBUS_ERROR_IFACE_SCAN_ERROR \
+ WPAS_DBUS_NEW_IFACE_INTERFACE ".ScanError"
+
+void wpas_dbus_subscribe_noc(struct wpas_dbus_priv *priv);
+void wpas_dbus_unsubscribe_noc(struct wpas_dbus_priv *priv);
+
+
+#ifdef CONFIG_CTRL_IFACE_DBUS_NEW
+
+int wpas_dbus_ctrl_iface_init(struct wpas_dbus_priv *priv);
+void wpas_dbus_ctrl_iface_deinit(struct wpas_dbus_priv *iface);
+
+int wpas_dbus_register_interface(struct wpa_supplicant *wpa_s);
+int wpas_dbus_unregister_interface(struct wpa_supplicant *wpa_s);
+void wpas_dbus_signal_prop_changed(struct wpa_supplicant *wpa_s,
+ enum wpas_dbus_prop property);
+void wpas_dbus_bss_signal_prop_changed(struct wpa_supplicant *wpa_s,
+ enum wpas_dbus_bss_prop property,
+ unsigned int id);
+void wpas_dbus_signal_network_enabled_changed(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void wpas_dbus_signal_network_selected(struct wpa_supplicant *wpa_s, int id);
+void wpas_dbus_signal_network_request(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid,
+ enum wpa_ctrl_req_type rtype,
+ const char *default_text);
+void wpas_dbus_signal_scan_done(struct wpa_supplicant *wpa_s, int success);
+void wpas_dbus_signal_wps_cred(struct wpa_supplicant *wpa_s,
+ const struct wps_credential *cred);
+void wpas_dbus_signal_wps_event_m2d(struct wpa_supplicant *wpa_s,
+ struct wps_event_m2d *m2d);
+void wpas_dbus_signal_wps_event_fail(struct wpa_supplicant *wpa_s,
+ struct wps_event_fail *fail);
+void wpas_dbus_signal_wps_event_success(struct wpa_supplicant *wpa_s);
+void wpas_dbus_signal_wps_event_pbc_overlap(struct wpa_supplicant *wpa_s);
+int wpas_dbus_register_network(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+int wpas_dbus_unregister_network(struct wpa_supplicant *wpa_s, int nid);
+int wpas_dbus_unregister_bss(struct wpa_supplicant *wpa_s,
+ u8 bssid[ETH_ALEN], unsigned int id);
+int wpas_dbus_register_bss(struct wpa_supplicant *wpa_s,
+ u8 bssid[ETH_ALEN], unsigned int id);
+int wpas_dbus_unregister_sta(struct wpa_supplicant *wpa_s, const u8 *sta);
+int wpas_dbus_register_sta(struct wpa_supplicant *wpa_s, const u8 *sta);
+void wpas_dbus_signal_blob_added(struct wpa_supplicant *wpa_s,
+ const char *name);
+void wpas_dbus_signal_blob_removed(struct wpa_supplicant *wpa_s,
+ const char *name);
+void wpas_dbus_signal_debug_level_changed(struct wpa_global *global);
+void wpas_dbus_signal_debug_timestamp_changed(struct wpa_global *global);
+void wpas_dbus_signal_debug_show_keys_changed(struct wpa_global *global);
+
+int wpas_dbus_register_peer(struct wpa_supplicant *wpa_s, const u8 *dev_addr);
+void wpas_dbus_signal_p2p_find_stopped(struct wpa_supplicant *wpa_s);
+void wpas_dbus_signal_peer_device_found(struct wpa_supplicant *wpa_s,
+ const u8 *dev_addr);
+int wpas_dbus_unregister_peer(struct wpa_supplicant *wpa_s,
+ const u8 *dev_addr);
+void wpas_dbus_signal_peer_device_lost(struct wpa_supplicant *wpa_s,
+ const u8 *dev_addr);
+void wpas_dbus_signal_peer_groups_changed(struct wpa_supplicant *wpa_s,
+ const u8 *dev_addr);
+void wpas_dbus_signal_p2p_group_removed(struct wpa_supplicant *wpa_s,
+ const char *role);
+void wpas_dbus_signal_p2p_provision_discovery(struct wpa_supplicant *wpa_s,
+ const u8 *dev_addr, int request,
+ enum p2p_prov_disc_status status,
+ u16 config_methods,
+ unsigned int generated_pin);
+void wpas_dbus_signal_p2p_go_neg_req(struct wpa_supplicant *wpa_s,
+ const u8 *src, u16 dev_passwd_id,
+ u8 go_intent);
+void wpas_dbus_signal_p2p_group_started(struct wpa_supplicant *wpa_s,
+ int client, int persistent,
+ const u8 *ip);
+void wpas_dbus_signal_p2p_group_formation_failure(struct wpa_supplicant *wpa_s,
+ const char *reason);
+void wpas_dbus_register_p2p_group(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void wpas_dbus_signal_p2p_go_neg_resp(struct wpa_supplicant *wpa_s,
+ struct p2p_go_neg_results *res);
+void wpas_dbus_unregister_p2p_group(struct wpa_supplicant *wpa_s,
+ const struct wpa_ssid *ssid);
+int wpas_dbus_register_persistent_group(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+int wpas_dbus_unregister_persistent_group(struct wpa_supplicant *wpa_s,
+ int nid);
+void wpas_dbus_signal_p2p_invitation_result(struct wpa_supplicant *wpa_s,
+ int status, const u8 *bssid);
+void wpas_dbus_signal_p2p_peer_disconnected(struct wpa_supplicant *wpa_s,
+ const u8 *member);
+void wpas_dbus_signal_p2p_sd_request(struct wpa_supplicant *wpa_s,
+ int freq, const u8 *sa, u8 dialog_token,
+ u16 update_indic, const u8 *tlvs,
+ size_t tlvs_len);
+void wpas_dbus_signal_p2p_sd_response(struct wpa_supplicant *wpa_s,
+ const u8 *sa, u16 update_indic,
+ const u8 *tlvs, size_t tlvs_len);
+void wpas_dbus_signal_p2p_peer_joined(struct wpa_supplicant *wpa_s,
+ const u8 *member);
+void wpas_dbus_signal_p2p_wps_failed(struct wpa_supplicant *wpa_s,
+ struct wps_event_fail *fail);
+void wpas_dbus_signal_certification(struct wpa_supplicant *wpa_s,
+ int depth, const char *subject,
+ const char *altsubject[],
+ int num_altsubject,
+ const char *cert_hash,
+ const struct wpabuf *cert);
+void wpas_dbus_signal_preq(struct wpa_supplicant *wpa_s,
+ const u8 *addr, const u8 *dst, const u8 *bssid,
+ const u8 *ie, size_t ie_len, u32 ssi_signal);
+void wpas_dbus_signal_eap_status(struct wpa_supplicant *wpa_s,
+ const char *status, const char *parameter);
+void wpas_dbus_signal_sta_authorized(struct wpa_supplicant *wpa_s,
+ const u8 *sta);
+void wpas_dbus_signal_sta_deauthorized(struct wpa_supplicant *wpa_s,
+ const u8 *sta);
+void wpas_dbus_signal_p2p_invitation_received(struct wpa_supplicant *wpa_s,
+ const u8 *sa, const u8 *dev_addr,
+ const u8 *bssid, int id,
+ int op_freq);
+void wpas_dbus_signal_mesh_group_started(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void wpas_dbus_signal_mesh_group_removed(struct wpa_supplicant *wpa_s,
+ const u8 *meshid, u8 meshid_len,
+ int reason);
+void wpas_dbus_signal_mesh_peer_connected(struct wpa_supplicant *wpa_s,
+ const u8 *peer_addr);
+void wpas_dbus_signal_mesh_peer_disconnected(struct wpa_supplicant *wpa_s,
+ const u8 *peer_addr, int reason);
+void wpas_dbus_signal_interworking_ap_added(struct wpa_supplicant *wpa_s,
+ struct wpa_bss *bss,
+ struct wpa_cred *cred,
+ const char *type, int excluded,
+ int bh, int bss_load,
+ int conn_capab);
+void wpas_dbus_signal_interworking_select_done(struct wpa_supplicant *wpa_s);
+
+#else /* CONFIG_CTRL_IFACE_DBUS_NEW */
+
+static inline int wpas_dbus_register_interface(struct wpa_supplicant *wpa_s)
+{
+ return 0;
+}
+
+static inline int wpas_dbus_unregister_interface(struct wpa_supplicant *wpa_s)
+{
+ return 0;
+}
+
+#define wpas_dbus_signal_state_changed(w, n, o) do { } while (0)
+
+static inline void wpas_dbus_signal_prop_changed(struct wpa_supplicant *wpa_s,
+ enum wpas_dbus_prop property)
+{
+}
+
+static inline void wpas_dbus_bss_signal_prop_changed(
+ struct wpa_supplicant *wpa_s, enum wpas_dbus_bss_prop property,
+ unsigned int id)
+{
+}
+
+static inline void wpas_dbus_signal_network_enabled_changed(
+ struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid)
+{
+}
+
+static inline void wpas_dbus_signal_network_selected(
+ struct wpa_supplicant *wpa_s, int id)
+{
+}
+
+static inline void wpas_dbus_signal_network_request(
+ struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid,
+ enum wpa_ctrl_req_type rtype, const char *default_txt)
+{
+}
+
+static inline void wpas_dbus_signal_scan_done(struct wpa_supplicant *wpa_s,
+ int success)
+{
+}
+
+static inline void wpas_dbus_signal_wps_cred(struct wpa_supplicant *wpa_s,
+ const struct wps_credential *cred)
+{
+}
+
+static inline void wpas_dbus_signal_wps_event_m2d(struct wpa_supplicant *wpa_s,
+ struct wps_event_m2d *m2d)
+{
+}
+
+static inline void wpas_dbus_signal_wps_event_fail(
+ struct wpa_supplicant *wpa_s, struct wps_event_fail *fail)
+{
+}
+
+static inline void wpas_dbus_signal_wps_event_success(
+ struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline void wpas_dbus_signal_wps_event_pbc_overlap(
+ struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline int wpas_dbus_register_network(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid)
+{
+ return 0;
+}
+
+static inline int wpas_dbus_unregister_network(struct wpa_supplicant *wpa_s,
+ int nid)
+{
+ return 0;
+}
+
+static inline int wpas_dbus_unregister_bss(struct wpa_supplicant *wpa_s,
+ u8 bssid[ETH_ALEN], unsigned int id)
+{
+ return 0;
+}
+
+static inline int wpas_dbus_register_bss(struct wpa_supplicant *wpa_s,
+ u8 bssid[ETH_ALEN], unsigned int id)
+{
+ return 0;
+}
+
+static inline int wpas_dbus_unregister_sta(struct wpa_supplicant *wpa_s,
+ const u8 *sta)
+{
+ return 0;
+}
+
+static inline int wpas_dbus_register_sta(struct wpa_supplicant *wpa_s,
+ const u8 *sta)
+{
+ return 0;
+}
+
+static inline void wpas_dbus_signal_blob_added(struct wpa_supplicant *wpa_s,
+ const char *name)
+{
+}
+
+static inline void wpas_dbus_signal_blob_removed(struct wpa_supplicant *wpa_s,
+ const char *name)
+{
+}
+
+static inline void wpas_dbus_signal_debug_level_changed(
+ struct wpa_global *global)
+{
+}
+
+static inline void wpas_dbus_signal_debug_timestamp_changed(
+ struct wpa_global *global)
+{
+}
+
+static inline void wpas_dbus_signal_debug_show_keys_changed(
+ struct wpa_global *global)
+{
+}
+
+static inline int wpas_dbus_register_peer(struct wpa_supplicant *wpa_s,
+ const u8 *dev_addr)
+{
+ return 0;
+}
+
+static inline int wpas_dbus_unregister_peer(struct wpa_supplicant *wpa_s,
+ const u8 *dev_addr)
+{
+ return 0;
+}
+
+static inline void
+wpas_dbus_signal_peer_groups_changed(struct wpa_supplicant *wpa_s,
+ const u8 *dev_addr)
+{
+}
+
+static inline void
+wpas_dbus_signal_p2p_group_removed(struct wpa_supplicant *wpa_s,
+ const char *role)
+{
+}
+
+static inline void
+wpas_dbus_signal_p2p_provision_discovery(struct wpa_supplicant *wpa_s,
+ const u8 *dev_addr, int request,
+ enum p2p_prov_disc_status status,
+ u16 config_methods,
+ unsigned int generated_pin)
+{
+}
+
+static inline void wpas_dbus_signal_p2p_go_neg_req(struct wpa_supplicant *wpa_s,
+ const u8 *src,
+ u16 dev_passwd_id,
+ u8 go_intent)
+{
+}
+
+static inline void
+wpas_dbus_signal_p2p_group_started(struct wpa_supplicant *wpa_s,
+ int client, int persistent,
+ const u8 *ip)
+{
+}
+
+static inline void
+wpas_dbus_signal_p2p_group_formation_failure(struct wpa_supplicant *wpa_s,
+ const char *reason)
+{
+}
+
+static inline void
+wpas_dbus_register_p2p_group(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid)
+{
+}
+
+static inline int wpas_dbus_register_persistent_group(
+ struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid)
+{
+ return 0;
+}
+
+static inline int wpas_dbus_unregister_persistent_group(
+ struct wpa_supplicant *wpa_s, int nid)
+{
+ return 0;
+}
+
+static inline void
+wpas_dbus_signal_p2p_go_neg_resp(struct wpa_supplicant *wpa_s,
+ struct p2p_go_neg_results *res)
+{
+}
+
+static inline void
+wpas_dbus_unregister_p2p_group(struct wpa_supplicant *wpa_s,
+ const struct wpa_ssid *ssid)
+{
+}
+
+static inline void wpas_dbus_signal_p2p_invitation_result(
+ struct wpa_supplicant *wpa_s, int status,
+ const u8 *bssid)
+{
+}
+
+static inline void
+wpas_dbus_register_p2p_groupmember(struct wpa_supplicant *wpa_s,
+ const u8 *p2p_if_addr)
+{
+}
+
+static inline void
+wpas_dbus_signal_p2p_sd_request(struct wpa_supplicant *wpa_s, int freq,
+ const u8 *sa, u8 dialog_token, u16 update_indic,
+ const u8 *tlvs, size_t tlvs_len)
+{
+}
+
+static inline void
+wpas_dbus_signal_p2p_sd_response(struct wpa_supplicant *wpa_s,
+ const u8 *sa, u16 update_indic,
+ const u8 *tlvs, size_t tlvs_len)
+{
+}
+
+static inline void
+wpas_dbus_unregister_p2p_groupmember(struct wpa_supplicant *wpa_s,
+ const u8 *p2p_if_addr)
+{
+}
+
+static inline void
+wpas_dbus_signal_p2p_peer_joined(struct wpa_supplicant *wpa_s,
+ const u8 *member)
+{
+}
+
+static inline void
+wpas_dbus_signal_p2p_find_stopped(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline void
+wpas_dbus_signal_peer_device_found(struct wpa_supplicant *wpa_s,
+ const u8 *dev_addr)
+{
+}
+
+static inline void
+wpas_dbus_signal_peer_device_lost(struct wpa_supplicant *wpa_s,
+ const u8 *dev_addr)
+{
+}
+
+static inline void
+wpas_dbus_signal_p2p_peer_disconnected(struct wpa_supplicant *wpa_s,
+ const u8 *member)
+{
+}
+
+static inline void
+wpas_dbus_signal_p2p_wps_failed(struct wpa_supplicant *wpa_s,
+ struct wps_event_fail *fail)
+{
+}
+
+static inline void wpas_dbus_signal_certification(struct wpa_supplicant *wpa_s,
+ int depth,
+ const char *subject,
+ const char *altsubject[],
+ int num_altsubject,
+ const char *cert_hash,
+ const struct wpabuf *cert)
+{
+}
+
+static inline void wpas_dbus_signal_preq(struct wpa_supplicant *wpa_s,
+ const u8 *addr, const u8 *dst,
+ const u8 *bssid,
+ const u8 *ie, size_t ie_len,
+ u32 ssi_signal)
+{
+}
+
+static inline void wpas_dbus_signal_eap_status(struct wpa_supplicant *wpa_s,
+ const char *status,
+ const char *parameter)
+{
+}
+
+static inline
+void wpas_dbus_signal_sta_authorized(struct wpa_supplicant *wpa_s,
+ const u8 *sta)
+{
+}
+
+static inline
+void wpas_dbus_signal_sta_deauthorized(struct wpa_supplicant *wpa_s,
+ const u8 *sta)
+{
+}
+
+static inline
+void wpas_dbus_signal_p2p_invitation_received(struct wpa_supplicant *wpa_s,
+ const u8 *sa, const u8 *dev_addr,
+ const u8 *bssid, int id,
+ int op_freq)
+{
+}
+
+static inline
+void wpas_dbus_signal_mesh_group_started(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid)
+{
+}
+
+static inline
+void wpas_dbus_signal_mesh_group_removed(struct wpa_supplicant *wpa_s,
+ const u8 *meshid, u8 meshid_len,
+ int reason)
+{
+}
+
+static inline
+void wpas_dbus_signal_mesh_peer_connected(struct wpa_supplicant *wpa_s,
+ const u8 *peer_addr)
+{
+}
+
+static inline
+void wpas_dbus_signal_mesh_peer_disconnected(struct wpa_supplicant *wpa_s,
+ const u8 *peer_addr, int reason)
+{
+}
+
+static inline
+void wpas_dbus_signal_interworking_ap_added(struct wpa_supplicant *wpa_s,
+ struct wpa_bss *bss,
+ struct wpa_cred *cred,
+ const char *type, int excluded,
+ int bh, int bss_load,
+ int conn_capab)
+{
+}
+
+static inline
+void wpas_dbus_signal_interworking_select_done(struct wpa_supplicant *wpa_s)
+{
+}
+
+#endif /* CONFIG_CTRL_IFACE_DBUS_NEW */
+
+#endif /* CTRL_IFACE_DBUS_H_NEW */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_new_handlers.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_new_handlers.h
new file mode 100755
index 0000000..a421083
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_new_handlers.h
@@ -0,0 +1,285 @@
+/*
+ * WPA Supplicant / dbus-based control interface
+ * Copyright (c) 2006, Dan Williams <dcbw@redhat.com> and Red Hat, Inc.
+ * Copyright (c) 2009-2010, Witold Sowa <witold.sowa@gmail.com>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef CTRL_IFACE_DBUS_NEW_HANDLERS_H
+#define CTRL_IFACE_DBUS_NEW_HANDLERS_H
+
+#include "dbus_new_helpers.h"
+
+struct network_handler_args {
+ struct wpa_supplicant *wpa_s;
+ struct wpa_ssid *ssid;
+};
+
+struct bss_handler_args {
+ struct wpa_supplicant *wpa_s;
+ unsigned int id;
+};
+
+struct sta_handler_args {
+ struct wpa_supplicant *wpa_s;
+ const u8 *sta;
+};
+
+dbus_bool_t wpas_dbus_simple_property_getter(DBusMessageIter *iter,
+ const int type,
+ const void *val,
+ DBusError *error);
+
+dbus_bool_t wpas_dbus_simple_property_setter(DBusMessageIter *iter,
+ DBusError *error,
+ const int type, void *val);
+
+dbus_bool_t wpas_dbus_simple_array_property_getter(DBusMessageIter *iter,
+ const int type,
+ const void *array,
+ size_t array_len,
+ DBusError *error);
+
+dbus_bool_t wpas_dbus_simple_array_array_property_getter(DBusMessageIter *iter,
+ const int type,
+ struct wpabuf **array,
+ size_t array_len,
+ DBusError *error);
+
+dbus_bool_t wpas_dbus_string_property_getter(DBusMessageIter *iter,
+ const void *val,
+ DBusError *error);
+
+DBusMessage * wpas_dbus_handler_create_interface(DBusMessage *message,
+ struct wpa_global *global);
+
+DBusMessage * wpas_dbus_handler_remove_interface(DBusMessage *message,
+ struct wpa_global *global);
+
+DBusMessage * wpas_dbus_handler_get_interface(DBusMessage *message,
+ struct wpa_global *global);
+
+DBusMessage * wpas_dbus_handler_expect_disconnect(DBusMessage *message,
+ struct wpa_global *global);
+
+DECLARE_ACCESSOR(wpas_dbus_getter_debug_level);
+DECLARE_ACCESSOR(wpas_dbus_getter_debug_timestamp);
+DECLARE_ACCESSOR(wpas_dbus_getter_debug_show_keys);
+DECLARE_ACCESSOR(wpas_dbus_setter_debug_level);
+DECLARE_ACCESSOR(wpas_dbus_setter_debug_timestamp);
+DECLARE_ACCESSOR(wpas_dbus_setter_debug_show_keys);
+DECLARE_ACCESSOR(wpas_dbus_getter_interfaces);
+DECLARE_ACCESSOR(wpas_dbus_getter_eap_methods);
+DECLARE_ACCESSOR(wpas_dbus_getter_global_capabilities);
+DECLARE_ACCESSOR(wpas_dbus_getter_iface_global);
+DECLARE_ACCESSOR(wpas_dbus_setter_iface_global);
+
+DBusMessage * wpas_dbus_handler_scan(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_abort_scan(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_signal_poll(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_disconnect(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+dbus_bool_t set_network_properties(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid,
+ DBusMessageIter *iter,
+ DBusError *error);
+
+DBusMessage * wpas_dbus_handler_add_network(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_reassociate(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_reattach(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_reconnect(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_remove_network(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_remove_all_networks(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_select_network(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_network_reply(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_roam(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_add_blob(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_get_blob(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_remove_blob(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_set_pkcs11_engine_and_module_path(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_flush_bss(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_autoscan(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_eap_logoff(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_eap_logon(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_add_cred(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_remove_cred(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_remove_all_creds(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage *
+wpas_dbus_handler_interworking_select(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DECLARE_ACCESSOR(wpas_dbus_getter_capabilities);
+DECLARE_ACCESSOR(wpas_dbus_getter_state);
+DECLARE_ACCESSOR(wpas_dbus_getter_scanning);
+DECLARE_ACCESSOR(wpas_dbus_getter_ap_scan);
+DECLARE_ACCESSOR(wpas_dbus_setter_ap_scan);
+DECLARE_ACCESSOR(wpas_dbus_getter_fast_reauth);
+DECLARE_ACCESSOR(wpas_dbus_setter_fast_reauth);
+DECLARE_ACCESSOR(wpas_dbus_getter_disconnect_reason);
+DECLARE_ACCESSOR(wpas_dbus_getter_disassociate_reason);
+DECLARE_ACCESSOR(wpas_dbus_getter_auth_status_code);
+DECLARE_ACCESSOR(wpas_dbus_getter_assoc_status_code);
+DECLARE_ACCESSOR(wpas_dbus_getter_roam_time);
+DECLARE_ACCESSOR(wpas_dbus_getter_roam_complete);
+DECLARE_ACCESSOR(wpas_dbus_getter_session_length);
+DECLARE_ACCESSOR(wpas_dbus_getter_bss_tm_status);
+DECLARE_ACCESSOR(wpas_dbus_getter_bss_expire_age);
+DECLARE_ACCESSOR(wpas_dbus_setter_bss_expire_age);
+DECLARE_ACCESSOR(wpas_dbus_getter_bss_expire_count);
+DECLARE_ACCESSOR(wpas_dbus_setter_bss_expire_count);
+DECLARE_ACCESSOR(wpas_dbus_getter_country);
+DECLARE_ACCESSOR(wpas_dbus_setter_country);
+DECLARE_ACCESSOR(wpas_dbus_getter_scan_interval);
+DECLARE_ACCESSOR(wpas_dbus_setter_scan_interval);
+DECLARE_ACCESSOR(wpas_dbus_getter_ifname);
+DECLARE_ACCESSOR(wpas_dbus_getter_driver);
+DECLARE_ACCESSOR(wpas_dbus_getter_bridge_ifname);
+DECLARE_ACCESSOR(wpas_dbus_setter_bridge_ifname);
+DECLARE_ACCESSOR(wpas_dbus_getter_config_file);
+DECLARE_ACCESSOR(wpas_dbus_getter_current_bss);
+DECLARE_ACCESSOR(wpas_dbus_getter_current_network);
+DECLARE_ACCESSOR(wpas_dbus_getter_current_auth_mode);
+DECLARE_ACCESSOR(wpas_dbus_getter_bsss);
+DECLARE_ACCESSOR(wpas_dbus_getter_networks);
+DECLARE_ACCESSOR(wpas_dbus_getter_pkcs11_engine_path);
+DECLARE_ACCESSOR(wpas_dbus_getter_pkcs11_module_path);
+DECLARE_ACCESSOR(wpas_dbus_getter_blobs);
+DECLARE_ACCESSOR(wpas_dbus_getter_stas);
+DECLARE_ACCESSOR(wpas_dbus_getter_mac_address_randomization_mask);
+DECLARE_ACCESSOR(wpas_dbus_setter_mac_address_randomization_mask);
+DECLARE_ACCESSOR(wpas_dbus_getter_sta_address);
+DECLARE_ACCESSOR(wpas_dbus_getter_sta_aid);
+DECLARE_ACCESSOR(wpas_dbus_getter_sta_caps);
+DECLARE_ACCESSOR(wpas_dbus_getter_sta_rx_packets);
+DECLARE_ACCESSOR(wpas_dbus_getter_sta_tx_packets);
+DECLARE_ACCESSOR(wpas_dbus_getter_sta_tx_bytes);
+DECLARE_ACCESSOR(wpas_dbus_getter_sta_rx_bytes);
+DECLARE_ACCESSOR(wpas_dbus_getter_bss_bssid);
+DECLARE_ACCESSOR(wpas_dbus_getter_bss_ssid);
+DECLARE_ACCESSOR(wpas_dbus_getter_bss_privacy);
+DECLARE_ACCESSOR(wpas_dbus_getter_bss_mode);
+DECLARE_ACCESSOR(wpas_dbus_getter_bss_signal);
+DECLARE_ACCESSOR(wpas_dbus_getter_bss_frequency);
+DECLARE_ACCESSOR(wpas_dbus_getter_bss_rates);
+DECLARE_ACCESSOR(wpas_dbus_getter_bss_wpa);
+DECLARE_ACCESSOR(wpas_dbus_getter_bss_rsn);
+DECLARE_ACCESSOR(wpas_dbus_getter_bss_wps);
+DECLARE_ACCESSOR(wpas_dbus_getter_bss_ies);
+DECLARE_ACCESSOR(wpas_dbus_getter_bss_age);
+DECLARE_ACCESSOR(wpas_dbus_getter_enabled);
+DECLARE_ACCESSOR(wpas_dbus_setter_enabled);
+DECLARE_ACCESSOR(wpas_dbus_getter_network_properties);
+DECLARE_ACCESSOR(wpas_dbus_setter_network_properties);
+
+DBusMessage * wpas_dbus_handler_wps_start(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_wps_cancel(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DECLARE_ACCESSOR(wpas_dbus_getter_process_credentials);
+DECLARE_ACCESSOR(wpas_dbus_setter_process_credentials);
+DECLARE_ACCESSOR(wpas_dbus_getter_config_methods);
+DECLARE_ACCESSOR(wpas_dbus_setter_config_methods);
+DECLARE_ACCESSOR(wpas_dbus_getter_wps_device_name);
+DECLARE_ACCESSOR(wpas_dbus_setter_wps_device_name);
+DECLARE_ACCESSOR(wpas_dbus_getter_wps_manufacturer);
+DECLARE_ACCESSOR(wpas_dbus_setter_wps_manufacturer);
+DECLARE_ACCESSOR(wpas_dbus_getter_wps_device_model_name);
+DECLARE_ACCESSOR(wpas_dbus_setter_wps_device_model_name);
+DECLARE_ACCESSOR(wpas_dbus_getter_wps_device_model_number);
+DECLARE_ACCESSOR(wpas_dbus_setter_wps_device_model_number);
+DECLARE_ACCESSOR(wpas_dbus_getter_wps_device_serial_number);
+DECLARE_ACCESSOR(wpas_dbus_setter_wps_device_serial_number);
+DECLARE_ACCESSOR(wpas_dbus_getter_wps_device_device_type);
+DECLARE_ACCESSOR(wpas_dbus_setter_wps_device_device_type);
+
+DECLARE_ACCESSOR(wpas_dbus_getter_mesh_peers);
+DECLARE_ACCESSOR(wpas_dbus_getter_mesh_group);
+
+DBusMessage * wpas_dbus_handler_tdls_discover(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+DBusMessage * wpas_dbus_handler_tdls_setup(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+DBusMessage * wpas_dbus_handler_tdls_status(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+DBusMessage * wpas_dbus_handler_tdls_teardown(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+DBusMessage *
+wpas_dbus_handler_tdls_channel_switch(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+DBusMessage *
+wpas_dbus_handler_tdls_cancel_channel_switch(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_vendor_elem_add(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+DBusMessage * wpas_dbus_handler_vendor_elem_get(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+DBusMessage * wpas_dbus_handler_vendor_elem_remove(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_save_config(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_error_invalid_args(DBusMessage *message,
+ const char *arg);
+DBusMessage * wpas_dbus_error_unknown_error(DBusMessage *message,
+ const char *arg);
+DBusMessage * wpas_dbus_error_no_memory(DBusMessage *message);
+
+DBusMessage * wpas_dbus_handler_subscribe_preq(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+DBusMessage * wpas_dbus_handler_unsubscribe_preq(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+#endif /* CTRL_IFACE_DBUS_HANDLERS_NEW_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_new_handlers_p2p.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_new_handlers_p2p.h
new file mode 100755
index 0000000..b3c45c1
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_new_handlers_p2p.h
@@ -0,0 +1,152 @@
+/*
+ * WPA Supplicant / dbus-based control interface for p2p
+ * Copyright (c) 2011-2012, Intel Corporation
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef DBUS_NEW_HANDLERS_P2P_H
+#define DBUS_NEW_HANDLERS_P2P_H
+
+struct peer_handler_args {
+ struct wpa_supplicant *wpa_s;
+ u8 p2p_device_addr[ETH_ALEN];
+};
+
+/*
+ * P2P Device methods
+ */
+
+DBusMessage *wpas_dbus_handler_p2p_find(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_stop_find(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_rejectpeer(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_listen(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_extendedlisten(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_presence_request(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_prov_disc_req(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_group_add(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_connect(
+ DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_p2p_cancel(DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_invite(
+ DBusMessage *message,
+ struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_disconnect(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_p2p_remove_client(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_flush(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_add_service(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_delete_service(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_flush_service(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_service_sd_req(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_service_sd_res(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_service_sd_cancel_req(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_service_update(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage *wpas_dbus_handler_p2p_serv_disc_external(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+/*
+ * P2P Device property accessor methods.
+ */
+DECLARE_ACCESSOR(wpas_dbus_setter_p2p_device_config);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_device_config);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peers);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_role);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_group);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peergo);
+
+/*
+ * P2P Peer properties.
+ */
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peer_device_name);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peer_manufacturer);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peer_modelname);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peer_modelnumber);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peer_serialnumber);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peer_primary_device_type);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peer_config_method);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peer_level);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peer_device_capability);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peer_group_capability);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peer_secondary_device_types);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peer_vendor_extension);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peer_ies);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peer_device_address);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peer_groups);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_peer_vsie);
+
+/*
+ * P2P Group properties
+ */
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_group_members);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_group_ssid);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_group_bssid);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_group_frequency);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_group_passphrase);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_group_psk);
+DECLARE_ACCESSOR(wpas_dbus_getter_p2p_group_vendor_ext);
+DECLARE_ACCESSOR(wpas_dbus_setter_p2p_group_vendor_ext);
+
+/*
+ * P2P Persistent Groups and properties
+ */
+DECLARE_ACCESSOR(wpas_dbus_getter_persistent_groups);
+DECLARE_ACCESSOR(wpas_dbus_getter_persistent_group_properties);
+DECLARE_ACCESSOR(wpas_dbus_setter_persistent_group_properties);
+
+DBusMessage * wpas_dbus_handler_add_persistent_group(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_remove_persistent_group(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+DBusMessage * wpas_dbus_handler_remove_all_persistent_groups(
+ DBusMessage *message, struct wpa_supplicant *wpa_s);
+
+#ifdef CONFIG_WIFI_DISPLAY
+DECLARE_ACCESSOR(wpas_dbus_getter_global_wfd_ies);
+DECLARE_ACCESSOR(wpas_dbus_setter_global_wfd_ies);
+#endif /* CONFIG_WIFI_DISPLAY */
+
+#endif /* DBUS_NEW_HANDLERS_P2P_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_new_helpers.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_new_helpers.h
new file mode 100755
index 0000000..7b63b28
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/dbus_new_helpers.h
@@ -0,0 +1,154 @@
+/*
+ * WPA Supplicant / dbus-based control interface
+ * Copyright (c) 2006, Dan Williams <dcbw@redhat.com> and Red Hat, Inc.
+ * Copyright (c) 2009, Witold Sowa <witold.sowa@gmail.com>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPA_DBUS_CTRL_H
+#define WPA_DBUS_CTRL_H
+
+#include <dbus/dbus.h>
+
+typedef DBusMessage * (*WPADBusMethodHandler)(DBusMessage *message,
+ void *user_data);
+typedef void (*WPADBusArgumentFreeFunction)(void *handler_arg);
+
+struct wpa_dbus_property_desc;
+typedef dbus_bool_t (*WPADBusPropertyAccessor)(
+ const struct wpa_dbus_property_desc *property_desc,
+ DBusMessageIter *iter, DBusError *error, void *user_data);
+#define DECLARE_ACCESSOR(f) \
+dbus_bool_t f(const struct wpa_dbus_property_desc *property_desc, \
+ DBusMessageIter *iter, DBusError *error, void *user_data)
+
+struct wpa_dbus_object_desc {
+ DBusConnection *connection;
+ char *path;
+
+ /* list of methods, properties and signals registered with object */
+ const struct wpa_dbus_method_desc *methods;
+ const struct wpa_dbus_signal_desc *signals;
+ const struct wpa_dbus_property_desc *properties;
+
+ /* property changed flags */
+ u8 *prop_changed_flags;
+
+ /* argument for method handlers and properties
+ * getter and setter functions */
+ void *user_data;
+ /* function used to free above argument */
+ WPADBusArgumentFreeFunction user_data_free_func;
+};
+
+enum dbus_arg_direction { ARG_IN, ARG_OUT };
+
+struct wpa_dbus_argument {
+ char *name;
+ char *type;
+ enum dbus_arg_direction dir;
+};
+
+#define END_ARGS { NULL, NULL, ARG_IN }
+
+/**
+ * struct wpa_dbus_method_desc - DBus method description
+ */
+struct wpa_dbus_method_desc {
+ /* method name */
+ const char *dbus_method;
+ /* method interface */
+ const char *dbus_interface;
+ /* method handling function */
+ WPADBusMethodHandler method_handler;
+ /* array of arguments */
+ struct wpa_dbus_argument args[4];
+};
+
+/**
+ * struct wpa_dbus_signal_desc - DBus signal description
+ */
+struct wpa_dbus_signal_desc {
+ /* signal name */
+ const char *dbus_signal;
+ /* signal interface */
+ const char *dbus_interface;
+ /* array of arguments */
+ struct wpa_dbus_argument args[4];
+};
+
+/**
+ * struct wpa_dbus_property_desc - DBus property description
+ */
+struct wpa_dbus_property_desc {
+ /* property name */
+ const char *dbus_property;
+ /* property interface */
+ const char *dbus_interface;
+ /* property type signature in DBus type notation */
+ const char *type;
+ /* property getter function */
+ WPADBusPropertyAccessor getter;
+ /* property setter function */
+ WPADBusPropertyAccessor setter;
+ /* other data */
+ const char *data;
+};
+
+
+#define WPAS_DBUS_OBJECT_PATH_MAX 150
+#define WPAS_DBUS_INTERFACE_MAX 150
+#define WPAS_DBUS_METHOD_SIGNAL_PROP_MAX 50
+#define WPAS_DBUS_AUTH_MODE_MAX 64
+
+#define WPA_DBUS_INTROSPECTION_INTERFACE "org.freedesktop.DBus.Introspectable"
+#define WPA_DBUS_INTROSPECTION_METHOD "Introspect"
+#define WPA_DBUS_PROPERTIES_INTERFACE "org.freedesktop.DBus.Properties"
+#define WPA_DBUS_PROPERTIES_GET "Get"
+#define WPA_DBUS_PROPERTIES_SET "Set"
+#define WPA_DBUS_PROPERTIES_GETALL "GetAll"
+
+void free_dbus_object_desc(struct wpa_dbus_object_desc *obj_dsc);
+
+int wpa_dbus_ctrl_iface_init(struct wpas_dbus_priv *iface, char *dbus_path,
+ char *dbus_service,
+ struct wpa_dbus_object_desc *obj_desc);
+
+int wpa_dbus_register_object_per_iface(
+ struct wpas_dbus_priv *ctrl_iface,
+ const char *path, const char *ifname,
+ struct wpa_dbus_object_desc *obj_desc);
+
+int wpa_dbus_unregister_object_per_iface(
+ struct wpas_dbus_priv *ctrl_iface,
+ const char *path);
+
+dbus_bool_t wpa_dbus_get_object_properties(struct wpas_dbus_priv *iface,
+ const char *path,
+ const char *interface,
+ DBusMessageIter *iter);
+
+
+void wpa_dbus_flush_all_changed_properties(DBusConnection *con);
+
+void wpa_dbus_flush_object_changed_properties(DBusConnection *con,
+ const char *path);
+
+void wpa_dbus_mark_property_changed(struct wpas_dbus_priv *iface,
+ const char *path, const char *interface,
+ const char *property);
+
+DBusMessage * wpa_dbus_introspect(DBusMessage *message,
+ struct wpa_dbus_object_desc *obj_dsc);
+
+char * wpas_dbus_new_decompose_object_path(const char *path, const char *sep,
+ char **item);
+
+DBusMessage *wpas_dbus_reply_new_from_error(DBusMessage *message,
+ DBusError *error,
+ const char *fallback_name,
+ const char *fallback_string);
+
+#endif /* WPA_DBUS_CTRL_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/fi.w1.wpa_supplicant1.service.in b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/fi.w1.wpa_supplicant1.service.in
new file mode 100755
index 0000000..d97ff39
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dbus/fi.w1.wpa_supplicant1.service.in
@@ -0,0 +1,5 @@
+[D-BUS Service]
+Name=fi.w1.wpa_supplicant1
+Exec=@BINDIR@/wpa_supplicant -u
+User=root
+SystemdService=wpa_supplicant.service
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/defconfig b/ap/app/wpa_supplicant-2.10/wpa_supplicant/defconfig
new file mode 100755
index 0000000..a4719db
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/defconfig
@@ -0,0 +1,635 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# wpa_supplicant binary. All lines starting with # are ignored. Configuration
+# option lines must be commented out complete, if they are not to be included,
+# i.e., just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for MACsec capable Qualcomm Atheros drivers
+#CONFIG_DRIVER_MACSEC_QCA=y
+
+# Driver interface for Linux MACsec drivers
+CONFIG_DRIVER_MACSEC_LINUX=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
+# MACsec is included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+CONFIG_EAP_FAST=y
+
+# EAP-TEAP
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# Enable SIM simulator (Milenage) for EAP-SIM
+#CONFIG_SIM_SIMULATOR=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+CONFIG_EAP_PWD=y
+
+# EAP-PAX
+CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+CONFIG_WPS=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+#CONFIG_EAP_EKE=y
+
+# MACsec
+CONFIG_MACSEC=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+#CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+#CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# udp6 = UDP IPv6 sockets using localhost (::1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+CONFIG_SAE=y
+
+# Disable scan result processing (ap_scan=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+# path is given on command line, not here; this option is just used to
+# select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operating system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+#CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+#CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# Disable Linux packet socket workaround applicable for station interface
+# in a bridge for EAPOL frames. This should be uncommented only if the kernel
+# is known to not have the regression issue in packet socket behavior with
+# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
+#CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
+
+# Support Operating Channel Validation
+#CONFIG_OCV=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+#CONFIG_TLS=openssl
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for new DBus control interface
+# (fi.w1.wpa_supplicant1)
+CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
+CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Add support for writing debug log to Android logcat instead of standard
+# output
+#CONFIG_ANDROID_LOG=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+#CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+#CONFIG_GETRANDOM=y
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+CONFIG_HS20=y
+
+# Enable interface matching in wpa_supplicant
+#CONFIG_MATCH_IFACE=y
+
+# Disable roaming in wpa_supplicant
+#CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+CONFIG_AP=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+CONFIG_P2P=y
+
+# Enable TDLS support
+CONFIG_TDLS=y
+
+# Wi-Fi Display
+# This can be used to enable Wi-Fi Display extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+#CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
+# File-based backend to read passwords from an external file.
+#CONFIG_EXT_PASSWORD_FILE=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# OS X builds. This is only for building eapol_test.
+#CONFIG_OSX=y
+
+# Automatic Channel Selection
+# This will allow wpa_supplicant to pick the channel automatically when channel
+# is set to "0".
+#
+# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
+# to "channel=0". This would enable us to eventually add other ACS algorithms in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
+# a newly to create wpa_supplicant.conf variable acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#CONFIG_ACS=y
+
+# Support Multi Band Operation
+#CONFIG_MBO=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Support RSN on IBSS networks
+# This is needed to be able to use mode=1 network profile with proto=RSN and
+# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
+CONFIG_IBSS_RSN=y
+
+# External PMKSA cache control
+# This can be used to enable control interface commands that allow the current
+# PMKSA cache entries to be fetched and new entries to be added.
+#CONFIG_PMKSA_CACHE_EXTERNAL=y
+
+# Mesh Networking (IEEE 802.11s)
+#CONFIG_MESH=y
+
+# Background scanning modules
+# These can be used to request wpa_supplicant to perform background scanning
+# operations for roaming within an ESS (same SSID). See the bgscan parameter in
+# the wpa_supplicant.conf file for more details.
+# Periodic background scans based on signal strength
+CONFIG_BGSCAN_SIMPLE=y
+# Learn channels used by the network and try to avoid bgscans on other
+# channels (experimental)
+#CONFIG_BGSCAN_LEARN=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Device Provisioning Protocol (DPP) (also known as Wi-Fi Easy Connect)
+CONFIG_DPP=y
+# DPP version 2 support
+CONFIG_DPP2=y
+# DPP version 3 support (experimental and still changing; do not enable for
+# production use)
+#CONFIG_DPP3=y
+
+# Wired equivalent privacy (WEP)
+# WEP is an obsolete cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used for anything anymore. The
+# functionality needed to use WEP is available in the current wpa_supplicant
+# release under this optional build parameter. This functionality is subject to
+# be completely removed in a future release.
+#CONFIG_WEP=y
+
+# Remove all TKIP functionality
+# TKIP is an old cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used anymore for anything else than a
+# backwards compatibility option as a group cipher when connecting to APs that
+# use WPA+WPA2 mixed mode. For now, the default wpa_supplicant build includes
+# support for this by default, but that functionality is subject to be removed
+# in the future.
+#CONFIG_NO_TKIP=y
+
+# Pre-Association Security Negotiation (PASN)
+# Experimental implementation based on IEEE P802.11z/D2.6 and the protocol
+# design is still subject to change. As such, this should not yet be enabled in
+# production use.
+#CONFIG_PASN=y
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/eapol_test.sgml b/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/eapol_test.sgml
new file mode 100755
index 0000000..b9b0a95
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/eapol_test.sgml
@@ -0,0 +1,209 @@
+<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+
+<refentry>
+ <refentryinfo>
+ <date>07 August 2019</date>
+ </refentryinfo>
+
+ <refmeta>
+ <refentrytitle>eapol_test</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </refmeta>
+ <refnamediv>
+ <refname>eapol_test</refname>
+
+ <refpurpose>EAP peer and RADIUS client testing</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <cmdsynopsis>
+ <command>eapol_test</command>
+ <arg>-nWS</arg>
+ <arg>-c<replaceable>config file</replaceable></arg>
+ <arg>-a<replaceable>server IP address</replaceable></arg>
+ <arg>-A<replaceable>client IP address</replaceable></arg>
+ <arg>-p<replaceable>UDP port</replaceable></arg>
+ <arg>-s<replaceable>shared secret</replaceable></arg>
+ <arg>-r<replaceable>re-authentications</replaceable></arg>
+ <arg>-t<replaceable>timeout</replaceable></arg>
+ <arg>-C<replaceable>Connect-Info</replaceable></arg>
+ <arg>-M<replaceable>MAC address</replaceable></arg>
+ <arg>-o<replaceable>file</replaceable></arg>
+ <arg>-N<replaceable>attr spec</replaceable></arg>
+ </cmdsynopsis>
+ <cmdsynopsis>
+ <command>eapol_test scard</command>
+ </cmdsynopsis>
+ <cmdsynopsis>
+ <command>eapol_test sim</command>
+ <arg>PIN</arg>
+ <arg>num triplets</arg>
+ </cmdsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Overview</title>
+
+ <para>eapol_test is a program that links together the same EAP
+ peer implementation that wpa_supplicant is using and the RADIUS
+ authentication client code from hostapd. In addition, it has
+ minimal glue code to combine these two components in similar
+ ways to IEEE 802.1X/EAPOL Authenticator state machines. In other
+ words, it integrates IEEE 802.1X Authenticator (normally, an
+ access point) and IEEE 802.1X Supplicant (normally, a wireless
+ client) together to generate a single program that can be used to
+ test EAP methods without having to setup an access point and a
+ wireless client.</para>
+
+ <para>The main uses for eapol_test are in interoperability testing
+ of EAP methods against RADIUS servers and in development testing
+ for new EAP methods. It can be easily used to automate EAP testing
+ for interoperability and regression since the program can be run
+ from shell scripts without require additional test components apart
+ from a RADIUS server. For example, the automated EAP tests described
+ in eap_testing.txt are implemented with eapol_test. Similarly,
+ eapol_test could be used to implement an automated regression
+ test suite for a RADIUS authentication server.</para>
+
+
+ <para>As an example:</para>
+
+<blockquote><programlisting>
+eapol_test -ctest.conf -a127.0.0.1 -p1812 -ssecret -r1
+</programlisting></blockquote>
+
+ <para>tries to complete EAP authentication based on the network
+ configuration from test.conf against the RADIUS server running
+ on the local host. A re-authentication is triggered to test fast
+ re-authentication. The configuration file uses the same format for
+ network blocks as wpa_supplicant.</para>
+
+ </refsect1>
+ <refsect1>
+ <title>Command Arguments</title>
+ <variablelist>
+ <varlistentry>
+ <term>-c configuration file path</term>
+
+ <listitem><para>A configuration to use. The configuration should
+ use the same format for network blocks as wpa_supplicant.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-a AS address</term>
+
+ <listitem><para>IP address of the authentication server. The
+ default is '127.0.0.1'.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-A client address</term>
+
+ <listitem><para>IP address of the client. The default is to
+ select an address automatically.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-p AS port</term>
+
+ <listitem><para>UDP port of the authentication server. The
+ default is '1812'.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-s AS secret</term>
+
+ <listitem><para>Shared secret with the authentication server.
+ The default is 'radius'.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-r count</term>
+
+ <listitem><para>Number of reauthentications.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-t timeout</term>
+
+ <listitem><para>Timeout in seconds. The default is 30.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-C info</term>
+
+ <listitem><para>RADIUS Connect-Info. The default is
+ 'CONNECT 11Mbps 802.11b'.</para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-M mac address</term>
+
+ <listitem><para>Client MAC address (Calling-Station-Id). The
+ default is '02:00:00:00:00:01'.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-o file</term>
+
+ <listitem><para>Location to write out server certificate.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-N attr spec</term>
+
+ <listitem><para>Send arbitrary attribute specific by
+ attr_id:syntax:value, or attr_id alone. attr_id should be the numeric
+ ID of the attribute, and syntax should be one of 's' (string),
+ 'd' (integer), or 'x' (octet string). The value is the attribute value
+ to send. When attr_id is given alone, NULL is used as the attribute
+ value. Multiple attributes can be specified by using the option
+ several times.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-n</term>
+
+ <listitem><para>Indicates that no MPPE keys are expected.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-W</term>
+
+ <listitem><para>Wait for a control interface monitor before starting.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-S</term>
+
+ <listitem><para>Save configuration after authentication.
+ </para></listitem>
+ </varlistentry>
+
+ </variablelist>
+ </refsect1>
+ <refsect1>
+ <title>See Also</title>
+ <para>
+ <citerefentry>
+ <refentrytitle>wpa_supplicant</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </citerefentry>
+ </para>
+ </refsect1>
+ <refsect1>
+ <title>Legal</title>
+ <para>wpa_supplicant is copyright (c) 2003-2022,
+ Jouni Malinen <email>j@w1.fi</email> and
+ contributors.
+ All Rights Reserved.</para>
+
+ <para>This program is licensed under the BSD license (the one with
+ advertisement clause removed).</para>
+ </refsect1>
+</refentry>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_background.sgml b/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_background.sgml
new file mode 100755
index 0000000..b0592e2
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_background.sgml
@@ -0,0 +1,105 @@
+<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+
+<refentry>
+ <refentryinfo>
+ <date>07 August 2019</date>
+ </refentryinfo>
+
+ <refmeta>
+ <refentrytitle>wpa_background</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </refmeta>
+ <refnamediv>
+ <refname>wpa_background</refname>
+ <refpurpose>Background information on Wi-Fi Protected Access and IEEE 802.11i</refpurpose>
+ </refnamediv>
+ <refsect1>
+ <title>WPA</title>
+
+ <para>The original security mechanism of IEEE 802.11 standard was
+ not designed to be strong and has proven to be insufficient for
+ most networks that require some kind of security. Task group I
+ (Security) of IEEE 802.11 working group
+ (http://www.ieee802.org/11/) has worked to address the flaws of
+ the base standard and has in practice completed its work in May
+ 2004. The IEEE 802.11i amendment to the IEEE 802.11 standard was
+ approved in June 2004 and published in July 2004.</para>
+
+ <para>Wi-Fi Alliance (http://www.wi-fi.org/) used a draft version
+ of the IEEE 802.11i work (draft 3.0) to define a subset of the
+ security enhancements that can be implemented with existing wlan
+ hardware. This is called Wi-Fi Protected Access<TM> (WPA). This
+ has now become a mandatory component of interoperability testing
+ and certification done by Wi-Fi Alliance. Wi-Fi provides
+ information about WPA at its web site
+ (http://www.wi-fi.org/OpenSection/protected_access.asp).</para>
+
+ <para>IEEE 802.11 standard defined wired equivalent privacy (WEP)
+ algorithm for protecting wireless networks. WEP uses RC4 with
+ 40-bit keys, 24-bit initialization vector (IV), and CRC32 to
+ protect against packet forgery. All these choices have proven to
+ be insufficient: key space is too small against current attacks,
+ RC4 key scheduling is insufficient (beginning of the pseudorandom
+ stream should be skipped), IV space is too small and IV reuse
+ makes attacks easier, there is no replay protection, and non-keyed
+ authentication does not protect against bit flipping packet
+ data.</para>
+
+ <para>WPA is an intermediate solution for the security issues. It
+ uses Temporal Key Integrity Protocol (TKIP) to replace WEP. TKIP
+ is a compromise on strong security and possibility to use existing
+ hardware. It still uses RC4 for the encryption like WEP, but with
+ per-packet RC4 keys. In addition, it implements replay protection,
+ keyed packet authentication mechanism (Michael MIC).</para>
+
+ <para>Keys can be managed using two different mechanisms. WPA can
+ either use an external authentication server (e.g., RADIUS) and
+ EAP just like IEEE 802.1X is using or pre-shared keys without need
+ for additional servers. Wi-Fi calls these "WPA-Enterprise" and
+ "WPA-Personal", respectively. Both mechanisms will generate a
+ master session key for the Authenticator (AP) and Supplicant
+ (client station).</para>
+
+ <para>WPA implements a new key handshake (4-Way Handshake and
+ Group Key Handshake) for generating and exchanging data encryption
+ keys between the Authenticator and Supplicant. This handshake is
+ also used to verify that both Authenticator and Supplicant know
+ the master session key. These handshakes are identical regardless
+ of the selected key management mechanism (only the method for
+ generating master session key changes).</para>
+ </refsect1>
+
+ <refsect1>
+ <title>IEEE 802.11i / WPA2</title>
+
+ <para>The design for parts of IEEE 802.11i that were not included
+ in WPA has finished (May 2004) and this amendment to IEEE 802.11
+ was approved in June 2004. Wi-Fi Alliance is using the final IEEE
+ 802.11i as a new version of WPA called WPA2. This includes, e.g.,
+ support for more robust encryption algorithm (CCMP: AES in Counter
+ mode with CBC-MAC) to replace TKIP and optimizations for handoff
+ (reduced number of messages in initial key handshake,
+ pre-authentication, and PMKSA caching).</para>
+ </refsect1>
+
+ <refsect1>
+ <title>See Also</title>
+ <para>
+ <citerefentry>
+ <refentrytitle>wpa_supplicant</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </citerefentry>
+ </para>
+ </refsect1>
+
+ <refsect1>
+ <title>Legal</title>
+ <para>wpa_supplicant is copyright (c) 2003-2022,
+ Jouni Malinen <email>j@w1.fi</email> and
+ contributors.
+ All Rights Reserved.</para>
+
+ <para>This program is licensed under the BSD license (the one with
+ advertisement clause removed).</para>
+ </refsect1>
+</refentry>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_cli.sgml b/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_cli.sgml
new file mode 100755
index 0000000..b3d95ee
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_cli.sgml
@@ -0,0 +1,360 @@
+<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+
+<refentry>
+ <refentryinfo>
+ <date>07 August 2019</date>
+ </refentryinfo>
+
+ <refmeta>
+ <refentrytitle>wpa_cli</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </refmeta>
+ <refnamediv>
+ <refname>wpa_cli</refname>
+
+ <refpurpose>WPA command line client</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <cmdsynopsis>
+ <command>wpa_cli</command>
+ <arg>-p <replaceable>path to ctrl sockets</replaceable></arg>
+ <arg>-g <replaceable>path to global ctrl_interface socket</replaceable></arg>
+ <arg>-i <replaceable>ifname</replaceable></arg>
+ <arg>-hvB</arg>
+ <arg>-a <replaceable>action file</replaceable></arg>
+ <arg>-P <replaceable>pid file</replaceable></arg>
+ <arg>-G <replaceable>ping interval</replaceable></arg>
+ <arg><replaceable>command ...</replaceable></arg>
+ </cmdsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Overview</title>
+
+ <para>wpa_cli is a text-based frontend program for interacting
+ with wpa_supplicant. It is used to query current status, change
+ configuration, trigger events, and request interactive user
+ input.</para>
+
+ <para>wpa_cli can show the current authentication status, selected
+ security mode, dot11 and dot1x MIBs, etc. In addition, it can
+ configure some variables like EAPOL state machine parameters and
+ trigger events like reassociation and IEEE 802.1X
+ logoff/logon. wpa_cli provides a user interface to request
+ authentication information, like username and password, if these
+ are not included in the configuration. This can be used to
+ implement, e.g., one-time-passwords or generic token card
+ authentication where the authentication is based on a
+ challenge-response that uses an external device for generating the
+ response.</para>
+
+ <para>The control interface of wpa_supplicant can be configured to
+ allow non-root user access (ctrl_interface GROUP= parameter in the
+ configuration file). This makes it possible to run wpa_cli with a
+ normal user account.</para>
+
+ <para>wpa_cli supports two modes: interactive and command
+ line. Both modes share the same command set and the main
+ difference is in interactive mode providing access to unsolicited
+ messages (event messages, username/password requests).</para>
+
+ <para>Interactive mode is started when wpa_cli is executed without
+ including the command as a command line parameter. Commands are
+ then entered on the wpa_cli prompt. In command line mode, the same
+ commands are entered as command line arguments for wpa_cli.</para>
+ </refsect1>
+ <refsect1>
+ <title>Interactive authentication parameters request</title>
+
+ <para>When wpa_supplicant need authentication parameters, like
+ username and password, which are not present in the configuration
+ file, it sends a request message to all attached frontend programs,
+ e.g., wpa_cli in interactive mode. wpa_cli shows these requests
+ with "CTRL-REQ-<type>-<id>:<text>"
+ prefix. <type> is IDENTITY, PASSWORD, or OTP
+ (one-time-password). <id> is a unique identifier for the
+ current network. <text> is description of the request. In
+ case of OTP request, it includes the challenge from the
+ authentication server.</para>
+
+ <para>The reply to these requests can be given with
+ <emphasis>identity</emphasis>, <emphasis>password</emphasis>, and
+ <emphasis>otp</emphasis> commands. <id> needs to be copied from
+ the matching request. <emphasis>password</emphasis> and
+ <emphasis>otp</emphasis> commands can be used regardless of whether
+ the request was for PASSWORD or OTP. The main difference between these
+ two commands is that values given with <emphasis>password</emphasis> are
+ remembered as long as wpa_supplicant is running whereas values given
+ with <emphasis>otp</emphasis> are used only once and then forgotten,
+ i.e., wpa_supplicant will ask frontend for a new value for every use.
+ This can be used to implement one-time-password lists and generic token
+ card -based authentication.</para>
+
+ <para>Example request for password and a matching reply:</para>
+
+<blockquote><programlisting>
+CTRL-REQ-PASSWORD-1:Password needed for SSID foobar
+> password 1 mysecretpassword
+</programlisting></blockquote>
+
+ <para>Example request for generic token card challenge-response:</para>
+
+<blockquote><programlisting>
+CTRL-REQ-OTP-2:Challenge 1235663 needed for SSID foobar
+> otp 2 9876
+</programlisting></blockquote>
+
+ </refsect1>
+ <refsect1>
+ <title>Command Arguments</title>
+ <variablelist>
+ <varlistentry>
+ <term>-p path</term>
+
+ <listitem><para>Change the path where control sockets should
+ be found.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-g control socket path</term>
+
+ <listitem><para>Connect to the global control socket at the
+ indicated path rather than an interface-specific control
+ socket.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-i ifname</term>
+
+ <listitem><para>Specify the interface that is being
+ configured. By default, choose the first interface found with
+ a control socket in the socket path.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-h</term>
+ <listitem><para>Help. Show a usage message.</para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-v</term>
+ <listitem><para>Show version information.</para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-B</term>
+ <listitem><para>Run as a daemon in the background.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-a file</term>
+
+ <listitem><para>Run in daemon mode executing the action file
+ based on events from wpa_supplicant. The specified file will
+ be executed with the first argument set to interface name and
+ second to "CONNECTED" or "DISCONNECTED" depending on the event.
+ This can be used to execute networking tools required to configure
+ the interface.</para>
+
+ <para>Additionally, three environmental variables are available to
+ the file: WPA_CTRL_DIR, WPA_ID, and WPA_ID_STR. WPA_CTRL_DIR
+ contains the absolute path to the ctrl_interface socket. WPA_ID
+ contains the unique network_id identifier assigned to the active
+ network, and WPA_ID_STR contains the content of the id_str option.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-P file</term>
+
+ <listitem><para>Set the location of the PID
+ file.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-G ping interval</term>
+
+ <listitem><para>Set the interval (in seconds) at which
+ wpa_cli pings the supplicant.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>command</term>
+
+ <listitem><para>Run a command. The available commands are
+ listed in the next section.</para></listitem>
+
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+ <refsect1>
+ <title>Commands</title>
+ <para>The following commands are available:</para>
+
+ <variablelist>
+ <varlistentry>
+ <term>status</term>
+ <listitem>
+ <para>get current WPA/EAPOL/EAP status</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>mib</term>
+ <listitem>
+ <para>get MIB variables (dot1x, dot11)</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>help</term>
+ <listitem>
+ <para>show this usage help</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>interface [ifname]</term>
+ <listitem>
+ <para>show interfaces/select interface</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>level <debug level></term>
+ <listitem>
+ <para>change debug level</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>license</term>
+ <listitem>
+ <para>show full wpa_cli license</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>logoff</term>
+ <listitem>
+ <para>IEEE 802.1X EAPOL state machine logoff</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>logon</term>
+ <listitem>
+ <para>IEEE 802.1X EAPOL state machine logon</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>set</term>
+ <listitem>
+ <para>set variables (shows list of variables when run without arguments)</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>pmksa</term>
+ <listitem>
+ <para>show PMKSA cache</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>reassociate</term>
+ <listitem>
+ <para>force reassociation</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>reconfigure</term>
+ <listitem>
+ <para>force wpa_supplicant to re-read its configuration file</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>preauthenticate <BSSID></term>
+ <listitem>
+ <para>force preauthentication</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>identity <network id> <identity></term>
+ <listitem>
+ <para>configure identity for an SSID</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>password <network id> <password></term>
+ <listitem>
+ <para>configure password for an SSID</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>pin <network id> <pin></term>
+ <listitem>
+ <para>configure pin for an SSID</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>otp <network id> <password></term>
+ <listitem>
+ <para>configure one-time-password for an SSID</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>bssid <network id> <BSSID></term>
+ <listitem>
+ <para>set preferred BSSID for an SSID</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>list_networks</term>
+ <listitem>
+ <para>list configured networks</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>terminate</term>
+ <listitem>
+ <para>terminate <command>wpa_supplicant</command></para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>quit</term>
+ <listitem><para>exit wpa_cli</para></listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+ <refsect1>
+ <title>See Also</title>
+ <para>
+ <citerefentry>
+ <refentrytitle>wpa_supplicant</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </citerefentry>
+ </para>
+ </refsect1>
+ <refsect1>
+ <title>Legal</title>
+ <para>wpa_supplicant is copyright (c) 2003-2022,
+ Jouni Malinen <email>j@w1.fi</email> and
+ contributors.
+ All Rights Reserved.</para>
+
+ <para>This program is licensed under the BSD license (the one with
+ advertisement clause removed).</para>
+ </refsect1>
+</refentry>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_gui.sgml b/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_gui.sgml
new file mode 100755
index 0000000..c391645
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_gui.sgml
@@ -0,0 +1,106 @@
+<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+
+<refentry>
+ <refentryinfo>
+ <date>07 August 2019</date>
+ </refentryinfo>
+
+ <refmeta>
+ <refentrytitle>wpa_gui</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </refmeta>
+ <refnamediv>
+ <refname>wpa_gui</refname>
+
+ <refpurpose>WPA Graphical User Interface</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <cmdsynopsis>
+ <command>wpa_gui</command>
+ <arg>-p <replaceable>path to ctrl sockets</replaceable></arg>
+ <arg>-i <replaceable>ifname</replaceable></arg>
+ <arg>-m <replaceable>seconds</replaceable></arg>
+ <arg>-t</arg>
+ <arg>-q</arg>
+ </cmdsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Overview</title>
+
+ <para>wpa_gui is a QT graphical frontend program for interacting
+ with wpa_supplicant. It is used to query current status, change
+ configuration and request interactive user input.</para>
+
+ <para>wpa_gui supports (almost) all of the interactive status and
+ configuration features of the command line client, wpa_cli. Refer
+ to the wpa_cli manpage for a comprehensive list of the
+ interactive mode features.</para>
+ </refsect1>
+ <refsect1>
+ <title>Command Arguments</title>
+ <variablelist>
+ <varlistentry>
+ <term>-p path</term>
+
+ <listitem><para>Change the path where control sockets should
+ be found.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-i ifname</term>
+
+ <listitem><para>Specify the interface that is being
+ configured. By default, choose the first interface found with
+ a control socket in the socket path.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-m seconds</term>
+
+ <listitem><para>Set the update interval in seconds for the signal
+ strength meter. This value must be a positive integer, otherwise
+ meter is not enabled (default behavior).</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-t</term>
+
+ <listitem><para>Start program in the system tray only (if the window
+ manager supports it). By default the main status window is
+ shown.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-q</term>
+
+ <listitem><para>Run program in the quiet mode - do not display tray
+ icon pop-up messages.</para></listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+ <refsect1>
+ <title>See Also</title>
+ <para>
+ <citerefentry>
+ <refentrytitle>wpa_cli</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </citerefentry>
+ <citerefentry>
+ <refentrytitle>wpa_supplicant</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </citerefentry>
+ </para>
+ </refsect1>
+ <refsect1>
+ <title>Legal</title>
+ <para>wpa_supplicant is copyright (c) 2003-2022,
+ Jouni Malinen <email>j@w1.fi</email> and
+ contributors.
+ All Rights Reserved.</para>
+
+ <para>This program is licensed under the BSD license (the one with
+ advertisement clause removed).</para>
+ </refsect1>
+</refentry>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_passphrase.sgml b/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_passphrase.sgml
new file mode 100755
index 0000000..5934e79
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_passphrase.sgml
@@ -0,0 +1,77 @@
+<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+
+<refentry>
+ <refentryinfo>
+ <date>07 August 2019</date>
+ </refentryinfo>
+
+ <refmeta>
+ <refentrytitle>wpa_passphrase</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </refmeta>
+ <refnamediv>
+ <refname>wpa_passphrase</refname>
+ <refpurpose>Generate a WPA PSK from an ASCII passphrase for a SSID</refpurpose>
+ </refnamediv>
+ <refsynopsisdiv>
+ <cmdsynopsis>
+ <command>wpa_passphrase</command>
+ <arg><replaceable>ssid</replaceable></arg>
+ <arg><replaceable>passphrase</replaceable></arg>
+ </cmdsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Overview</title>
+
+ <para><command>wpa_passphrase</command> pre-computes PSK entries for
+ network configuration blocks of a
+ <filename>wpa_supplicant.conf</filename> file. An ASCII passphrase
+ and SSID are used to generate a 256-bit PSK.</para>
+ </refsect1>
+
+ <refsect1>
+ <title>Options</title>
+ <variablelist>
+ <varlistentry>
+ <term>ssid</term>
+ <listitem>
+ <para>The SSID whose passphrase should be derived.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>passphrase</term>
+ <listitem>
+ <para>The passphrase to use. If not included on the command line,
+ passphrase will be read from standard input.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>See Also</title>
+ <para>
+ <citerefentry>
+ <refentrytitle>wpa_supplicant.conf</refentrytitle>
+ <manvolnum>5</manvolnum>
+ </citerefentry>
+ <citerefentry>
+ <refentrytitle>wpa_supplicant</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </citerefentry>
+ </para>
+
+ </refsect1>
+ <refsect1>
+ <title>Legal</title>
+ <para>wpa_supplicant is copyright (c) 2003-2022,
+ Jouni Malinen <email>j@w1.fi</email> and
+ contributors.
+ All Rights Reserved.</para>
+
+ <para>This program is licensed under the BSD license (the one with
+ advertisement clause removed).</para>
+ </refsect1>
+</refentry>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_priv.sgml b/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_priv.sgml
new file mode 100755
index 0000000..4053eda
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_priv.sgml
@@ -0,0 +1,152 @@
+<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+
+<refentry>
+ <refentryinfo>
+ <date>07 August 2019</date>
+ </refentryinfo>
+
+ <refmeta>
+ <refentrytitle>wpa_priv</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </refmeta>
+ <refnamediv>
+ <refname>wpa_priv</refname>
+
+ <refpurpose>wpa_supplicant privilege separation helper</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <cmdsynopsis>
+ <command>wpa_priv</command>
+ <arg>-c <replaceable>ctrl path</replaceable></arg>
+ <arg>-Bdd</arg>
+ <arg>-P <replaceable>pid file</replaceable></arg>
+ <arg>driver:ifname <replaceable>[driver:ifname ...]</replaceable></arg>
+ </cmdsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Overview</title>
+
+ <para><command>wpa_priv</command> is a privilege separation helper that
+ minimizes the size of <command>wpa_supplicant</command> code that needs
+ to be run with root privileges.</para>
+
+ <para>If enabled, privileged operations are done in the wpa_priv process
+ while leaving rest of the code (e.g., EAP authentication and WPA
+ handshakes) to operate in an unprivileged process (wpa_supplicant) that
+ can be run as non-root user. Privilege separation restricts the effects
+ of potential software errors by containing the majority of the code in an
+ unprivileged process to avoid the possibility of a full system
+ compromise.</para>
+
+ <para><command>wpa_priv</command> needs to be run with network admin
+ privileges (usually, root user). It opens a UNIX domain socket for each
+ interface that is included on the command line; any other interface will
+ be off limits for <command>wpa_supplicant</command> in this kind of
+ configuration. After this, <command>wpa_supplicant</command> can be run as
+ a non-root user (e.g., all standard users on a laptop or as a special
+ non-privileged user account created just for this purpose to limit access
+ to user files even further).</para>
+ </refsect1>
+ <refsect1>
+ <title>Example configuration</title>
+
+ <para>The following steps are an example of how to configure
+ <command>wpa_priv</command> to allow users in the
+ <emphasis>wpapriv</emphasis> group to communicate with
+ <command>wpa_supplicant</command> with privilege separation:</para>
+
+ <para>Create user group (e.g., wpapriv) and assign users that
+ should be able to use wpa_supplicant into that group.</para>
+
+ <para>Create /var/run/wpa_priv directory for UNIX domain sockets and
+ control user access by setting it accessible only for the wpapriv
+ group:</para>
+
+<blockquote><programlisting>
+mkdir /var/run/wpa_priv
+chown root:wpapriv /var/run/wpa_priv
+chmod 0750 /var/run/wpa_priv
+</programlisting></blockquote>
+
+ <para>Start <command>wpa_priv</command> as root (e.g., from system
+ startup scripts) with the enabled interfaces configured on the
+ command line:</para>
+
+<blockquote><programlisting>
+wpa_priv -B -c /var/run/wpa_priv -P /var/run/wpa_priv.pid wext:wlan0
+</programlisting></blockquote>
+
+ <para>Run <command>wpa_supplicant</command> as non-root with a user
+ that is in the wpapriv group:</para>
+
+<blockquote><programlisting>
+wpa_supplicant -i ath0 -c wpa_supplicant.conf
+</programlisting></blockquote>
+
+ </refsect1>
+ <refsect1>
+ <title>Command Arguments</title>
+ <variablelist>
+ <varlistentry>
+ <term>-c ctrl path</term>
+
+ <listitem><para>Specify the path to wpa_priv control directory
+ (Default: /var/run/wpa_priv/).</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-B</term>
+ <listitem><para>Run as a daemon in the background.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-P file</term>
+
+ <listitem><para>Set the location of the PID
+ file.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>driver:ifname [driver:ifname ...]</term>
+
+ <listitem><para>The <driver> string dictates which of the
+ supported <command>wpa_supplicant</command> driver backends is to be
+ used. To get a list of supported driver types see wpa_supplicant help
+ (e.g, wpa_supplicant -h). The driver backend supported by most good
+ drivers is <emphasis>wext</emphasis>.</para>
+
+ <para>The <ifname> string specifies which network
+ interface is to be managed by <command>wpa_supplicant</command>
+ (e.g., wlan0 or ath0).</para>
+
+ <para><command>wpa_priv</command> does not use the network interface
+ before <command>wpa_supplicant</command> is started, so it is fine to
+ include network interfaces that are not available at the time wpa_priv
+ is started. wpa_priv can control multiple interfaces with one process,
+ but it is also possible to run multiple <command>wpa_priv</command>
+ processes at the same time, if desired.</para></listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+ <refsect1>
+ <title>See Also</title>
+ <para>
+ <citerefentry>
+ <refentrytitle>wpa_supplicant</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </citerefentry>
+ </para>
+ </refsect1>
+ <refsect1>
+ <title>Legal</title>
+ <para>wpa_supplicant is copyright (c) 2003-2022,
+ Jouni Malinen <email>j@w1.fi</email> and
+ contributors.
+ All Rights Reserved.</para>
+
+ <para>This program is licensed under the BSD license (the one with
+ advertisement clause removed).</para>
+ </refsect1>
+</refentry>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_supplicant.conf.sgml b/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_supplicant.conf.sgml
new file mode 100755
index 0000000..8a0314e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_supplicant.conf.sgml
@@ -0,0 +1,243 @@
+<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+<refentry>
+ <refentryinfo>
+ <date>07 August 2019</date>
+ </refentryinfo>
+
+ <refmeta>
+ <refentrytitle>wpa_supplicant.conf</refentrytitle>
+ <manvolnum>5</manvolnum>
+ </refmeta>
+ <refnamediv>
+ <refname>wpa_supplicant.conf</refname>
+ <refpurpose>configuration file for wpa_supplicant</refpurpose>
+ </refnamediv>
+ <refsect1>
+ <title>Overview</title>
+
+ <para><command>wpa_supplicant</command> is configured using a text
+ file that lists all accepted networks and security policies,
+ including pre-shared keys. See the example configuration file,
+ probably in <command>/usr/share/doc/wpa_supplicant/</command>, for
+ detailed information about the configuration format and supported
+ fields.</para>
+
+ <para>All file paths in this configuration file should use full
+ (absolute, not relative to working directory) path in order to allow
+ working directory to be changed. This can happen if wpa_supplicant is
+ run in the background.</para>
+
+ <para>Changes to configuration file can be reloaded be sending
+ SIGHUP signal to <command>wpa_supplicant</command> ('killall -HUP
+ wpa_supplicant'). Similarly, reloading can be triggered with
+ the <emphasis>wpa_cli reconfigure</emphasis> command.</para>
+
+ <para>Configuration file can include one or more network blocks,
+ e.g., one for each used SSID. wpa_supplicant will automatically
+ select the best network based on the order of network blocks in
+ the configuration file, network security level (WPA/WPA2 is
+ preferred), and signal strength.</para>
+ </refsect1>
+
+ <refsect1>
+ <title>Quick Examples</title>
+
+ <orderedlist>
+ <listitem>
+
+ <para>WPA-Personal (PSK) as home network and WPA-Enterprise with
+ EAP-TLS as work network.</para>
+
+<blockquote><programlisting>
+# allow frontend (e.g., wpa_cli) to be used by all users in 'wheel' group
+ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
+#
+# home network; allow all valid ciphers
+network={
+ ssid="home"
+ scan_ssid=1
+ key_mgmt=WPA-PSK
+ psk="very secret passphrase"
+}
+#
+# work network; use EAP-TLS with WPA; allow only CCMP and TKIP ciphers
+network={
+ ssid="work"
+ scan_ssid=1
+ key_mgmt=WPA-EAP
+ pairwise=CCMP TKIP
+ group=CCMP TKIP
+ eap=TLS
+ identity="user@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+}
+</programlisting></blockquote>
+ </listitem>
+
+ <listitem>
+ <para>WPA-RADIUS/EAP-PEAP/MSCHAPv2 with RADIUS servers that
+ use old peaplabel (e.g., Funk Odyssey and SBR, Meetinghouse
+ Aegis, Interlink RAD-Series)</para>
+
+<blockquote><programlisting>
+ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
+network={
+ ssid="example"
+ scan_ssid=1
+ key_mgmt=WPA-EAP
+ eap=PEAP
+ identity="user@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ phase1="peaplabel=0"
+ phase2="auth=MSCHAPV2"
+}
+</programlisting></blockquote>
+ </listitem>
+
+ <listitem>
+ <para>EAP-TTLS/EAP-MD5-Challenge configuration with anonymous
+ identity for the unencrypted use. Real identity is sent only
+ within an encrypted TLS tunnel.</para>
+
+
+<blockquote><programlisting>
+ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
+network={
+ ssid="example"
+ scan_ssid=1
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ identity="user@example.com"
+ anonymous_identity="anonymous@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ phase2="auth=MD5"
+}
+</programlisting></blockquote>
+
+ </listitem>
+
+ <listitem>
+ <para>IEEE 802.1X (i.e., no WPA) with dynamic WEP keys
+ (require both unicast and broadcast); use EAP-TLS for
+ authentication</para>
+
+<blockquote><programlisting>
+ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
+network={
+ ssid="1x-test"
+ scan_ssid=1
+ key_mgmt=IEEE8021X
+ eap=TLS
+ identity="user@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+ eapol_flags=3
+}
+</programlisting></blockquote>
+ </listitem>
+
+
+ <listitem>
+ <para>Catch all example that allows more or less all
+ configuration modes. The configuration options are used based
+ on what security policy is used in the selected SSID. This is
+ mostly for testing and is not recommended for normal
+ use.</para>
+
+<blockquote><programlisting>
+ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
+network={
+ ssid="example"
+ scan_ssid=1
+ key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
+ pairwise=CCMP TKIP
+ group=CCMP TKIP WEP104 WEP40
+ psk="very secret passphrase"
+ eap=TTLS PEAP TLS
+ identity="user@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+ phase1="peaplabel=0"
+ ca_cert2="/etc/cert/ca2.pem"
+ client_cert2="/etc/cer/user.pem"
+ private_key2="/etc/cer/user.prv"
+ private_key2_passwd="password"
+}
+</programlisting></blockquote>
+ </listitem>
+
+ <listitem>
+ <para>Authentication for wired Ethernet. This can be used with
+ <emphasis>wired</emphasis> or <emphasis>roboswitch</emphasis> interface
+ (-Dwired or -Droboswitch on command line).</para>
+
+<blockquote><programlisting>
+ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
+ap_scan=0
+network={
+ key_mgmt=IEEE8021X
+ eap=MD5
+ identity="user"
+ password="password"
+ eapol_flags=0
+}
+</programlisting></blockquote>
+ </listitem>
+ </orderedlist>
+
+
+
+
+
+ </refsect1>
+ <refsect1>
+ <title>Certificates</title>
+
+ <para>Some EAP authentication methods require use of
+ certificates. EAP-TLS uses both server side and client
+ certificates whereas EAP-PEAP and EAP-TTLS only require the server
+ side certificate. When client certificate is used, a matching
+ private key file has to also be included in configuration. If the
+ private key uses a passphrase, this has to be configured in
+ wpa_supplicant.conf ("private_key_passwd").</para>
+
+ <para>wpa_supplicant supports X.509 certificates in PEM and DER
+ formats. User certificate and private key can be included in the
+ same file.</para>
+
+ <para>If the user certificate and private key is received in
+ PKCS#12/PFX format, they need to be converted to suitable PEM/DER
+ format for wpa_supplicant. This can be done, e.g., with following
+ commands:</para>
+<blockquote><programlisting>
+# convert client certificate and private key to PEM format
+openssl pkcs12 -in example.pfx -out user.pem -clcerts
+# convert CA certificate (if included in PFX file) to PEM format
+openssl pkcs12 -in example.pfx -out ca.pem -cacerts -nokeys
+</programlisting></blockquote>
+ </refsect1>
+
+ <refsect1>
+ <title>See Also</title>
+ <para>
+ <citerefentry>
+ <refentrytitle>wpa_supplicant</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </citerefentry>
+ <citerefentry>
+ <refentrytitle>openssl</refentrytitle>
+ <manvolnum>1</manvolnum>
+ </citerefentry>
+ </para>
+ </refsect1>
+</refentry>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_supplicant.sgml b/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_supplicant.sgml
new file mode 100755
index 0000000..02012d1
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/doc/docbook/wpa_supplicant.sgml
@@ -0,0 +1,764 @@
+<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+
+<refentry>
+ <refentryinfo>
+ <date>07 August 2019</date>
+ </refentryinfo>
+
+ <refmeta>
+ <refentrytitle>wpa_supplicant</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </refmeta>
+ <refnamediv>
+ <refname>wpa_supplicant</refname>
+ <refpurpose>Wi-Fi Protected Access client and IEEE 802.1X supplicant</refpurpose>
+ </refnamediv>
+ <refsynopsisdiv>
+ <cmdsynopsis>
+ <command>wpa_supplicant</command>
+ <arg>-BddfhKLqqsTtuvW</arg>
+ <arg>-i<replaceable>ifname</replaceable></arg>
+ <arg>-c<replaceable>config file</replaceable></arg>
+ <arg>-D<replaceable>driver</replaceable></arg>
+ <arg>-P<replaceable>PID_file</replaceable></arg>
+ <arg>-f<replaceable>output file</replaceable></arg>
+ </cmdsynopsis>
+ </refsynopsisdiv>
+ <refsect1>
+ <title>Overview</title>
+
+ <para>
+ Wireless networks do not require physical access to the network equipment
+ in the same way as wired networks. This makes it easier for unauthorized
+ users to passively monitor a network and capture all transmitted frames.
+ In addition, unauthorized use of the network is much easier. In many cases,
+ this can happen even without user's explicit knowledge since the wireless
+ LAN adapter may have been configured to automatically join any available
+ network.
+ </para>
+
+ <para>
+ Link-layer encryption can be used to provide a layer of security for
+ wireless networks. The original wireless LAN standard, IEEE 802.11,
+ included a simple encryption mechanism, WEP. However, that proved to
+ be flawed in many areas and network protected with WEP cannot be consider
+ secure. IEEE 802.1X authentication and frequently changed dynamic WEP keys
+ can be used to improve the network security, but even that has inherited
+ security issues due to the use of WEP for encryption. Wi-Fi Protected
+ Access and IEEE 802.11i amendment to the wireless LAN standard introduce
+ a much improved mechanism for securing wireless networks. IEEE 802.11i
+ enabled networks that are using CCMP (encryption mechanism based on strong
+ cryptographic algorithm AES) can finally be called secure used for
+ applications which require efficient protection against unauthorized
+ access.
+ </para>
+
+ <para><command>wpa_supplicant</command> is an implementation of
+ the WPA Supplicant component, i.e., the part that runs in the
+ client stations. It implements WPA key negotiation with a WPA
+ Authenticator and EAP authentication with Authentication
+ Server. In addition, it controls the roaming and IEEE 802.11
+ authentication/association of the wireless LAN driver.</para>
+
+ <para><command>wpa_supplicant</command> is designed to be a
+ "daemon" program that runs in the background and acts as the
+ backend component controlling the wireless
+ connection. <command>wpa_supplicant</command> supports separate
+ frontend programs and an example text-based frontend,
+ <command>wpa_cli</command>, is included with
+ wpa_supplicant.</para>
+
+ <para>Before wpa_supplicant can do its work, the network interface
+ must be available. That means that the physical device must be
+ present and enabled, and the driver for the device must be
+ loaded. The daemon will exit immediately if the device is not already
+ available.</para>
+
+ <para>After <command>wpa_supplicant</command> has configured the
+ network device, higher level configuration such as DHCP may
+ proceed. There are a variety of ways to integrate wpa_supplicant
+ into a machine's networking scripts, a few of which are described
+ in sections below.</para>
+
+ <para>The following steps are used when associating with an AP
+ using WPA:</para>
+
+ <itemizedlist>
+ <listitem>
+ <para><command>wpa_supplicant</command> requests the kernel
+ driver to scan neighboring BSSes</para>
+ </listitem>
+
+ <listitem>
+ <para><command>wpa_supplicant</command> selects a BSS based on
+ its configuration</para>
+ </listitem>
+
+ <listitem>
+ <para><command>wpa_supplicant</command> requests the kernel
+ driver to associate with the chosen BSS</para>
+ </listitem>
+
+ <listitem>
+ <para>If WPA-EAP: integrated IEEE 802.1X Supplicant
+ completes EAP authentication with the
+ authentication server (proxied by the Authenticator in the
+ AP)</para>
+ </listitem>
+
+ <listitem>
+ <para>If WPA-EAP: master key is received from the IEEE 802.1X
+ Supplicant</para>
+ </listitem>
+
+ <listitem>
+ <para>If WPA-PSK: <command>wpa_supplicant</command> uses PSK
+ as the master session key</para>
+ </listitem>
+
+ <listitem>
+ <para><command>wpa_supplicant</command> completes WPA 4-Way
+ Handshake and Group Key Handshake with the Authenticator
+ (AP)</para>
+ </listitem>
+
+ <listitem>
+ <para><command>wpa_supplicant</command> configures encryption
+ keys for unicast and broadcast</para>
+ </listitem>
+
+ <listitem>
+ <para>normal data packets can be transmitted and received</para>
+ </listitem>
+ </itemizedlist>
+ </refsect1>
+
+ <refsect1>
+ <title>Supported Features</title>
+ <para>Supported WPA/IEEE 802.11i features:</para>
+ <itemizedlist>
+ <listitem>
+ <para>WPA-PSK ("WPA-Personal")</para>
+ </listitem>
+
+ <listitem>
+ <para>WPA with EAP (e.g., with RADIUS authentication server)
+ ("WPA-Enterprise") Following authentication methods are
+ supported with an integrate IEEE 802.1X Supplicant:</para>
+
+ <itemizedlist>
+ <listitem>
+ <para>EAP-TLS</para>
+ </listitem>
+ </itemizedlist>
+
+ <itemizedlist>
+ <listitem>
+ <para>EAP-PEAP/MSCHAPv2 (both PEAPv0 and PEAPv1)</para>
+ </listitem>
+
+
+ <listitem>
+ <para>EAP-PEAP/TLS (both PEAPv0 and PEAPv1)</para>
+ </listitem>
+
+ <listitem>
+ <para>EAP-PEAP/GTC (both PEAPv0 and PEAPv1)</para>
+ </listitem>
+
+ <listitem>
+ <para>EAP-PEAP/OTP (both PEAPv0 and PEAPv1)</para>
+ </listitem>
+
+ <listitem>
+ <para>EAP-PEAP/MD5-Challenge (both PEAPv0 and PEAPv1)</para>
+ </listitem>
+
+ <listitem>
+ <para>EAP-TTLS/EAP-MD5-Challenge</para>
+ </listitem>
+
+ <listitem>
+ <para>EAP-TTLS/EAP-GTC</para>
+ </listitem>
+
+ <listitem><para>EAP-TTLS/EAP-OTP</para></listitem>
+
+ <listitem><para>EAP-TTLS/EAP-MSCHAPv2</para></listitem>
+
+ <listitem><para>EAP-TTLS/EAP-TLS</para></listitem>
+
+ <listitem><para>EAP-TTLS/MSCHAPv2</para></listitem>
+
+ <listitem><para>EAP-TTLS/MSCHAP</para></listitem>
+
+ <listitem><para>EAP-TTLS/PAP</para></listitem>
+
+ <listitem><para>EAP-TTLS/CHAP</para></listitem>
+
+ <listitem><para>EAP-SIM</para></listitem>
+
+ <listitem><para>EAP-AKA</para></listitem>
+
+ <listitem><para>EAP-PSK</para></listitem>
+
+ <listitem><para>EAP-PAX</para></listitem>
+
+ <listitem><para>LEAP (note: requires special support from
+ the driver for IEEE 802.11 authentication)</para></listitem>
+
+ <listitem><para>(following methods are supported, but since
+ they do not generate keying material, they cannot be used
+ with WPA or IEEE 802.1X WEP keying)</para></listitem>
+
+ <listitem><para>EAP-MD5-Challenge </para></listitem>
+
+ <listitem><para>EAP-MSCHAPv2</para></listitem>
+
+ <listitem><para>EAP-GTC</para></listitem>
+
+ <listitem><para>EAP-OTP</para></listitem>
+ </itemizedlist>
+ </listitem>
+
+ <listitem>
+ <para>key management for CCMP, TKIP, WEP104, WEP40</para>
+ </listitem>
+
+ <listitem>
+ <para>RSN/WPA2 (IEEE 802.11i)</para>
+ <itemizedlist>
+ <listitem>
+ <para>pre-authentication</para>
+ </listitem>
+
+ <listitem>
+ <para>PMKSA caching</para>
+ </listitem>
+ </itemizedlist>
+ </listitem>
+ </itemizedlist>
+ </refsect1>
+
+ <refsect1>
+ <title>Available Drivers</title>
+ <para>A summary of available driver backends is below. Support for each
+ of the driver backends is chosen at wpa_supplicant compile time. For a
+ list of supported driver backends that may be used with the -D option on
+ your system, refer to the help output of wpa_supplicant
+ (<emphasis>wpa_supplicant -h</emphasis>).</para>
+
+ <variablelist>
+ <varlistentry>
+ <term>nl80211</term>
+ <listitem>
+ <para>Uses the modern Linux nl80211/cfg80211 netlink-based
+ interface (most new drivers).</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>wext</term>
+ <listitem>
+ <para>Uses the legacy Linux wireless extensions ioctl-based
+ interface (older hardware/drivers).</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>wired</term>
+ <listitem>
+ <para>wpa_supplicant wired Ethernet driver</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>roboswitch</term>
+ <listitem>
+ <para>wpa_supplicant Broadcom switch driver</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>bsd</term>
+ <listitem>
+ <para>BSD 802.11 support (Atheros, etc.).</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>ndis</term>
+ <listitem>
+ <para>Windows NDIS driver.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Command Line Options</title>
+ <para>Most command line options have global scope. Some are given per
+ interface, and are only valid if at least one <option>-i</option> option
+ is specified, otherwise they're ignored. Option groups for different
+ interfaces must be separated by <option>-N</option> option.</para>
+ <variablelist>
+ <varlistentry>
+ <term>-b br_ifname</term>
+ <listitem>
+ <para>Optional bridge interface name. (Per interface)</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-B</term>
+ <listitem>
+ <para>Run daemon in the background.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-c filename</term>
+ <listitem>
+ <para>Path to configuration file. (Per interface)</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-C ctrl_interface</term>
+ <listitem>
+ <para>Path to ctrl_interface socket (Per interface. Only used if
+ <option>-c</option> is not).</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-i ifname</term>
+ <listitem>
+ <para>Interface to listen on. Multiple instances of this option can
+ be present, one per interface, separated by <option>-N</option>
+ option (see below).</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-d</term>
+ <listitem>
+ <para>Increase debugging verbosity (<option>-dd</option> even
+ more).</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-D driver</term>
+ <listitem>
+ <para>Driver to use (can be multiple drivers: nl80211,wext).
+ (Per interface, see the available options below.)</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-e entropy file</term>
+ <listitem>
+ <para>File for <command>wpa_supplicant</command> to use to
+ maintain its internal entropy store in over restarts.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-f output file</term>
+ <listitem>
+ <para>Log output to specified file instead of stdout. (This
+ is only available if <command>wpa_supplicant</command> was
+ built with the <literal>CONFIG_DEBUG_FILE</literal>
+ option.)</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-g global ctrl_interface</term>
+ <listitem>
+ <para>Path to global ctrl_interface socket. If specified, interface
+ definitions may be omitted.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-K</term>
+ <listitem>
+ <para>Include keys (passwords, etc.) in debug output.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-h</term>
+ <listitem>
+ <para>Help. Show a usage message.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-L</term>
+ <listitem>
+ <para>Show license (BSD).</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-o override driver</term>
+ <listitem>
+ <para>Override the driver parameter for new
+ interfaces.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-O override ctrl_interface</term>
+ <listitem>
+ <para>Override the ctrl_interface parameter for new
+ interfaces.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-p</term>
+ <listitem>
+ <para>Driver parameters. (Per interface)</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-P PID_file</term>
+ <listitem>
+ <para>Path to PID file.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-q</term>
+ <listitem>
+ <para>Decrease debugging verbosity (<option>-qq</option> even
+ less).</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-s</term>
+ <listitem>
+ <para>Log output to syslog instead of stdout. (This is only
+ available if <command>wpa_supplicant</command> was built
+ with the <literal>CONFIG_DEBUG_SYSLOG</literal>
+ option.)</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-T</term>
+ <listitem>
+ <para>Log output to Linux tracing in addition to any other
+ destinations. (This is only available
+ if <command>wpa_supplicant</command> was built with
+ the <literal>CONFIG_DEBUG_LINUX_TRACING</literal>
+ option.)</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-t</term>
+ <listitem>
+ <para>Include timestamp in debug messages.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-u</term>
+ <listitem>
+ <para>Enable DBus control interface. If enabled, interface
+ definitions may be omitted. (This is only available
+ if <command>wpa_supplicant</command> was built with
+ the <literal>CONFIG_CTRL_IFACE_DBUS_NEW</literal> option.)</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-v</term>
+ <listitem>
+ <para>Show version.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-W</term>
+ <listitem>
+ <para>Wait for a control interface monitor before starting.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-N</term>
+ <listitem>
+ <para>Start describing new interface.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Examples</title>
+
+ <para>In most common cases, <command>wpa_supplicant</command> is
+ started with:</para>
+
+<blockquote><programlisting>
+wpa_supplicant -B -c/etc/wpa_supplicant.conf -iwlan0
+</programlisting></blockquote>
+
+ <para>This makes the process fork into background.</para>
+
+ <para>The easiest way to debug problems, and to get debug log for
+ bug reports, is to start <command>wpa_supplicant</command> on
+ foreground with debugging enabled:</para>
+
+<blockquote><programlisting>
+wpa_supplicant -c/etc/wpa_supplicant.conf -iwlan0 -d
+</programlisting></blockquote>
+
+ <para>If the specific driver wrapper is not known beforehand, it is
+ possible to specify multiple comma separated driver wrappers on the command
+ line. <command>wpa_supplicant</command> will use the first driver
+ wrapper that is able to initialize the interface.</para>
+
+<blockquote><programlisting>
+wpa_supplicant -Dnl80211,wext -c/etc/wpa_supplicant.conf -iwlan0
+</programlisting></blockquote>
+
+ <para><command>wpa_supplicant</command> can control multiple
+ interfaces (radios) either by running one process for each
+ interface separately or by running just one process and list of
+ options at command line. Each interface is separated with -N
+ argument. As an example, following command would start
+ wpa_supplicant for two interfaces:</para>
+
+<blockquote><programlisting>
+wpa_supplicant \
+ -c wpa1.conf -i wlan0 -D nl80211 -N \
+ -c wpa2.conf -i ath0 -D wext
+</programlisting></blockquote>
+ </refsect1>
+
+ <refsect1>
+ <title>OS Requirements</title>
+ <para>Current hardware/software requirements:</para>
+
+ <itemizedlist>
+ <listitem>
+ <para>Linux kernel 2.6.30 or higher with
+ nl80211/cfg80211 support</para>
+ </listitem>
+
+ <listitem>
+ <para>Linux kernel 2.4.x or higher with Linux Wireless
+ Extensions v15 or newer</para>
+ </listitem>
+
+ <listitem>
+ <para>FreeBSD 6-CURRENT</para>
+ </listitem>
+
+ <listitem>
+ <para>Microsoft Windows with WinPcap (at least WinXP, may work
+ with other versions)</para>
+ </listitem>
+ </itemizedlist>
+ </refsect1>
+
+ <refsect1>
+ <title>Supported Drivers</title>
+ <variablelist>
+ <varlistentry>
+ <term>Linux nl80211/cfg80211</term>
+ <listitem>
+ <para>This is the preferred driver for Linux.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Linux wireless extensions</term>
+ <listitem>
+ <para>In theory, any driver that supports Linux wireless
+ extensions can be used with IEEE 802.1X (i.e., not WPA) when
+ using ap_scan=0 option in configuration file.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Wired Ethernet drivers</term>
+ <listitem>
+ <para>Use ap_scan=0.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>BSD net80211 layer (e.g., Atheros driver)</term>
+ <listitem>
+ <para>At the moment, this is for FreeBSD 6-CURRENT branch.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Windows NDIS</term>
+ <listitem>
+ <para>The current Windows port requires WinPcap
+ (http://winpcap.polito.it/). See README-Windows.txt for more
+ information.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+
+
+ <para>wpa_supplicant was designed to be portable for different
+ drivers and operating systems. Hopefully, support for more wlan
+ cards and OSes will be added in the future. See developer.txt for
+ more information about the design of wpa_supplicant and porting to
+ other drivers. One main goal is to add full WPA/WPA2 support to
+ Linux wireless extensions to allow new drivers to be supported
+ without having to implement new driver-specific interface code in
+ wpa_supplicant.</para>
+ </refsect1>
+
+ <refsect1>
+ <title>Architecture</title> <para>The
+ <command>wpa_supplicant</command> system consists of the following
+ components:</para>
+
+ <variablelist>
+ <varlistentry>
+ <term><filename>wpa_supplicant.conf</filename> </term>
+ <listitem>
+ <para>the configuration file describing all networks that the
+ user wants the computer to connect to. </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><command>wpa_supplicant</command></term>
+ <listitem><para>the program that directly interacts with the
+ network interface. </para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><command>wpa_cli</command></term> <listitem><para> the
+ client program that provides a high-level interface to the
+ functionality of the daemon. </para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><command>wpa_passphrase</command></term>
+ <listitem><para>a utility needed to construct
+ <filename>wpa_supplicant.conf</filename> files that include
+ encrypted passwords.</para></listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Quick Start</title>
+
+ <para>First, make a configuration file, e.g.
+ <filename>/etc/wpa_supplicant.conf</filename>, that describes the networks
+ you are interested in. See <citerefentry>
+ <refentrytitle>wpa_supplicant.conf</refentrytitle>
+ <manvolnum>5</manvolnum>
+ </citerefentry>
+ for details.</para>
+
+ <para>Once the configuration is ready, you can test whether the
+ configuration works by running <command>wpa_supplicant</command>
+ with following command to start it on foreground with debugging
+ enabled:</para>
+
+ <blockquote><programlisting>
+wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -d
+ </programlisting></blockquote>
+
+ <para>Assuming everything goes fine, you can start using following
+ command to start <command>wpa_supplicant</command> on background
+ without debugging:</para>
+
+ <blockquote><programlisting>
+wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -B
+ </programlisting></blockquote>
+
+ <para>Please note that if you included more than one driver
+ interface in the build time configuration (.config), you may need
+ to specify which interface to use by including -D<driver
+ name> option on the command line.</para>
+
+ <!-- XXX at this point, the page could include a little script
+ based on wpa_cli to wait for a connection and then run
+ dhclient -->
+
+ </refsect1>
+
+ <refsect1>
+ <title>Interface to pcmcia-cs/cardmrg</title>
+
+ <para>For example, following small changes to pcmcia-cs scripts
+ can be used to enable WPA support:</para>
+
+ <para>Add MODE="Managed" and WPA="y" to the network scheme in
+ <filename>/etc/pcmcia/wireless.opts</filename>.</para>
+
+ <para>Add the following block to the end of <emphasis>start</emphasis>
+ action handler in <filename>/etc/pcmcia/wireless</filename>:</para>
+
+ <blockquote><programlisting>
+if [ "$WPA" = "y" -a -x /usr/local/bin/wpa_supplicant ]; then
+ /usr/local/bin/wpa_supplicant -B -c/etc/wpa_supplicant.conf -i$DEVICE
+fi
+ </programlisting></blockquote>
+
+
+ <para>Add the following block to the end of <emphasis>stop</emphasis>
+ action handler (may need to be separated from other actions) in
+ <filename>/etc/pcmcia/wireless</filename>:</para>
+
+ <blockquote><programlisting>
+if [ "$WPA" = "y" -a -x /usr/local/bin/wpa_supplicant ]; then
+ killall wpa_supplicant
+fi
+ </programlisting></blockquote>
+
+ <para>This will make <command>cardmgr</command> start
+ <command>wpa_supplicant</command> when the card is plugged
+ in.</para>
+ </refsect1>
+
+ <refsect1>
+ <title>See Also</title>
+ <para>
+ <citerefentry>
+ <refentrytitle>wpa_background</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </citerefentry>
+ <citerefentry>
+ <refentrytitle>wpa_supplicant.conf</refentrytitle>
+ <manvolnum>5</manvolnum>
+ </citerefentry>
+ <citerefentry>
+ <refentrytitle>wpa_cli</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </citerefentry>
+ <citerefentry>
+ <refentrytitle>wpa_passphrase</refentrytitle>
+ <manvolnum>8</manvolnum>
+ </citerefentry>
+ </para>
+ </refsect1>
+ <refsect1>
+ <title>Legal</title>
+ <para>wpa_supplicant is copyright (c) 2003-2022,
+ Jouni Malinen <email>j@w1.fi</email> and
+ contributors.
+ All Rights Reserved.</para>
+
+ <para>This program is licensed under the BSD license (the one with
+ advertisement clause removed).</para>
+ </refsect1>
+</refentry>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/dpp_supplicant.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dpp_supplicant.h
new file mode 100755
index 0000000..b0d5fcf
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/dpp_supplicant.h
@@ -0,0 +1,45 @@
+/*
+ * wpa_supplicant - DPP
+ * Copyright (c) 2017, Qualcomm Atheros, Inc.
+ * Copyright (c) 2018-2020, The Linux Foundation
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef DPP_SUPPLICANT_H
+#define DPP_SUPPLICANT_H
+
+enum dpp_status_error;
+
+int wpas_dpp_qr_code(struct wpa_supplicant *wpa_s, const char *cmd);
+int wpas_dpp_nfc_uri(struct wpa_supplicant *wpa_s, const char *cmd);
+int wpas_dpp_nfc_handover_req(struct wpa_supplicant *wpa_s, const char *cmd);
+int wpas_dpp_nfc_handover_sel(struct wpa_supplicant *wpa_s, const char *cmd);
+int wpas_dpp_auth_init(struct wpa_supplicant *wpa_s, const char *cmd);
+int wpas_dpp_listen(struct wpa_supplicant *wpa_s, const char *cmd);
+void wpas_dpp_listen_stop(struct wpa_supplicant *wpa_s);
+void wpas_dpp_remain_on_channel_cb(struct wpa_supplicant *wpa_s,
+ unsigned int freq, unsigned int duration);
+void wpas_dpp_cancel_remain_on_channel_cb(struct wpa_supplicant *wpa_s,
+ unsigned int freq);
+void wpas_dpp_rx_action(struct wpa_supplicant *wpa_s, const u8 *src,
+ const u8 *buf, size_t len, unsigned int freq);
+int wpas_dpp_configurator_sign(struct wpa_supplicant *wpa_s, const char *cmd);
+int wpas_dpp_pkex_add(struct wpa_supplicant *wpa_s, const char *cmd);
+int wpas_dpp_pkex_remove(struct wpa_supplicant *wpa_s, const char *id);
+void wpas_dpp_stop(struct wpa_supplicant *wpa_s);
+int wpas_dpp_init(struct wpa_supplicant *wpa_s);
+void wpas_dpp_deinit(struct wpa_supplicant *wpa_s);
+int wpas_dpp_check_connect(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid,
+ struct wpa_bss *bss);
+int wpas_dpp_controller_start(struct wpa_supplicant *wpa_s, const char *cmd);
+void wpas_dpp_connected(struct wpa_supplicant *wpa_s);
+void wpas_dpp_send_conn_status_result(struct wpa_supplicant *wpa_s,
+ enum dpp_status_error result);
+int wpas_dpp_chirp(struct wpa_supplicant *wpa_s, const char *cmd);
+void wpas_dpp_chirp_stop(struct wpa_supplicant *wpa_s);
+int wpas_dpp_reconfig(struct wpa_supplicant *wpa_s, const char *cmd);
+int wpas_dpp_ca_set(struct wpa_supplicant *wpa_s, const char *cmd);
+
+#endif /* DPP_SUPPLICANT_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/driver_i.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/driver_i.h
new file mode 100755
index 0000000..237f4e0
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/driver_i.h
@@ -0,0 +1,1120 @@
+/*
+ * wpa_supplicant - Internal driver interface wrappers
+ * Copyright (c) 2003-2015, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef DRIVER_I_H
+#define DRIVER_I_H
+
+#include "drivers/driver.h"
+
+/* driver_ops */
+static inline void * wpa_drv_init(struct wpa_supplicant *wpa_s,
+ const char *ifname)
+{
+ if (wpa_s->driver->init2)
+ return wpa_s->driver->init2(wpa_s, ifname,
+ wpa_s->global_drv_priv);
+ if (wpa_s->driver->init) {
+ return wpa_s->driver->init(wpa_s, ifname);
+ }
+ return NULL;
+}
+
+static inline void wpa_drv_deinit(struct wpa_supplicant *wpa_s)
+{
+ if (wpa_s->driver->deinit)
+ wpa_s->driver->deinit(wpa_s->drv_priv);
+}
+
+static inline int wpa_drv_set_param(struct wpa_supplicant *wpa_s,
+ const char *param)
+{
+ if (wpa_s->driver->set_param)
+ return wpa_s->driver->set_param(wpa_s->drv_priv, param);
+ return 0;
+}
+
+static inline int wpa_drv_set_countermeasures(struct wpa_supplicant *wpa_s,
+ int enabled)
+{
+ if (wpa_s->driver->set_countermeasures) {
+ return wpa_s->driver->set_countermeasures(wpa_s->drv_priv,
+ enabled);
+ }
+ return -1;
+}
+
+static inline int wpa_drv_authenticate(struct wpa_supplicant *wpa_s,
+ struct wpa_driver_auth_params *params)
+{
+ if (wpa_s->driver->authenticate)
+ return wpa_s->driver->authenticate(wpa_s->drv_priv, params);
+ return -1;
+}
+
+static inline int wpa_drv_associate(struct wpa_supplicant *wpa_s,
+ struct wpa_driver_associate_params *params)
+{
+ if (wpa_s->driver->associate) {
+ return wpa_s->driver->associate(wpa_s->drv_priv, params);
+ }
+ return -1;
+}
+
+static inline int wpa_drv_init_mesh(struct wpa_supplicant *wpa_s)
+{
+ if (wpa_s->driver->init_mesh)
+ return wpa_s->driver->init_mesh(wpa_s->drv_priv);
+ return -1;
+}
+
+static inline int wpa_drv_join_mesh(struct wpa_supplicant *wpa_s,
+ struct wpa_driver_mesh_join_params *params)
+{
+ if (wpa_s->driver->join_mesh)
+ return wpa_s->driver->join_mesh(wpa_s->drv_priv, params);
+ return -1;
+}
+
+static inline int wpa_drv_leave_mesh(struct wpa_supplicant *wpa_s)
+{
+ if (wpa_s->driver->leave_mesh)
+ return wpa_s->driver->leave_mesh(wpa_s->drv_priv);
+ return -1;
+}
+
+static inline int wpa_drv_mesh_link_probe(struct wpa_supplicant *wpa_s,
+ const u8 *addr,
+ const u8 *eth, size_t len)
+{
+ if (wpa_s->driver->probe_mesh_link)
+ return wpa_s->driver->probe_mesh_link(wpa_s->drv_priv, addr,
+ eth, len);
+ return -1;
+}
+
+static inline int wpa_drv_scan(struct wpa_supplicant *wpa_s,
+ struct wpa_driver_scan_params *params)
+{
+#ifdef CONFIG_TESTING_OPTIONS
+ if (wpa_s->test_failure == WPAS_TEST_FAILURE_SCAN_TRIGGER)
+ return -EBUSY;
+#endif /* CONFIG_TESTING_OPTIONS */
+ if (wpa_s->driver->scan2)
+ return wpa_s->driver->scan2(wpa_s->drv_priv, params);
+ return -1;
+}
+
+static inline int wpa_drv_sched_scan(struct wpa_supplicant *wpa_s,
+ struct wpa_driver_scan_params *params)
+{
+ if (wpa_s->driver->sched_scan)
+ return wpa_s->driver->sched_scan(wpa_s->drv_priv, params);
+ return -1;
+}
+
+static inline int wpa_drv_stop_sched_scan(struct wpa_supplicant *wpa_s)
+{
+ if (wpa_s->driver->stop_sched_scan)
+ return wpa_s->driver->stop_sched_scan(wpa_s->drv_priv);
+ return -1;
+}
+
+struct wpa_scan_results *
+wpa_drv_get_scan_results2(struct wpa_supplicant *wpa_s);
+
+static inline int wpa_drv_get_bssid(struct wpa_supplicant *wpa_s, u8 *bssid)
+{
+ if (wpa_s->driver->get_bssid) {
+ return wpa_s->driver->get_bssid(wpa_s->drv_priv, bssid);
+ }
+ return -1;
+}
+
+static inline int wpa_drv_get_ssid(struct wpa_supplicant *wpa_s, u8 *ssid)
+{
+ if (wpa_s->driver->get_ssid) {
+ return wpa_s->driver->get_ssid(wpa_s->drv_priv, ssid);
+ }
+ return -1;
+}
+
+static inline int wpa_drv_set_key(struct wpa_supplicant *wpa_s,
+ enum wpa_alg alg, const u8 *addr,
+ int key_idx, int set_tx,
+ const u8 *seq, size_t seq_len,
+ const u8 *key, size_t key_len,
+ enum key_flag key_flag)
+{
+ struct wpa_driver_set_key_params params;
+
+ os_memset(¶ms, 0, sizeof(params));
+ params.ifname = wpa_s->ifname;
+ params.alg = alg;
+ params.addr = addr;
+ params.key_idx = key_idx;
+ params.set_tx = set_tx;
+ params.seq = seq;
+ params.seq_len = seq_len;
+ params.key = key;
+ params.key_len = key_len;
+ params.key_flag = key_flag;
+
+ if (alg != WPA_ALG_NONE) {
+ /* keyidx = 1 can be either a broadcast or--with
+ * Extended Key ID--a unicast key. Use bit 15 for
+ * the pairwise keyidx 1 which is hopefully high enough
+ * to not clash with future extensions.
+ */
+ if (key_idx == 1 && (key_flag & KEY_FLAG_PAIRWISE))
+ wpa_s->keys_cleared &= ~BIT(15);
+ else if (key_idx >= 0 && key_idx <= 5)
+ wpa_s->keys_cleared &= ~BIT(key_idx);
+ else
+ wpa_s->keys_cleared = 0;
+ }
+ if (wpa_s->driver->set_key) {
+ return wpa_s->driver->set_key(wpa_s->drv_priv, ¶ms);
+ }
+ return -1;
+}
+
+static inline int wpa_drv_get_seqnum(struct wpa_supplicant *wpa_s,
+ const u8 *addr, int idx, u8 *seq)
+{
+ if (wpa_s->driver->get_seqnum)
+ return wpa_s->driver->get_seqnum(wpa_s->ifname, wpa_s->drv_priv,
+ addr, idx, seq);
+ return -1;
+}
+
+static inline int wpa_drv_sta_deauth(struct wpa_supplicant *wpa_s,
+ const u8 *addr, u16 reason_code)
+{
+ if (wpa_s->driver->sta_deauth) {
+ return wpa_s->driver->sta_deauth(wpa_s->drv_priv,
+ wpa_s->own_addr, addr,
+ reason_code);
+ }
+ return -1;
+}
+
+static inline int wpa_drv_deauthenticate(struct wpa_supplicant *wpa_s,
+ const u8 *addr, u16 reason_code)
+{
+ if (wpa_s->driver->deauthenticate) {
+ return wpa_s->driver->deauthenticate(wpa_s->drv_priv, addr,
+ reason_code);
+ }
+ return -1;
+}
+
+static inline int wpa_drv_add_pmkid(struct wpa_supplicant *wpa_s,
+ struct wpa_pmkid_params *params)
+{
+ if (wpa_s->driver->add_pmkid) {
+ return wpa_s->driver->add_pmkid(wpa_s->drv_priv, params);
+ }
+ return -1;
+}
+
+static inline int wpa_drv_remove_pmkid(struct wpa_supplicant *wpa_s,
+ struct wpa_pmkid_params *params)
+{
+ if (wpa_s->driver->remove_pmkid) {
+ return wpa_s->driver->remove_pmkid(wpa_s->drv_priv, params);
+ }
+ return -1;
+}
+
+static inline int wpa_drv_flush_pmkid(struct wpa_supplicant *wpa_s)
+{
+ if (wpa_s->driver->flush_pmkid) {
+ return wpa_s->driver->flush_pmkid(wpa_s->drv_priv);
+ }
+ return -1;
+}
+
+static inline int wpa_drv_get_capa(struct wpa_supplicant *wpa_s,
+ struct wpa_driver_capa *capa)
+{
+ if (wpa_s->driver->get_capa) {
+ return wpa_s->driver->get_capa(wpa_s->drv_priv, capa);
+ }
+ return -1;
+}
+
+static inline void wpa_drv_poll(struct wpa_supplicant *wpa_s)
+{
+ if (wpa_s->driver->poll) {
+ wpa_s->driver->poll(wpa_s->drv_priv);
+ }
+}
+
+static inline const char * wpa_drv_get_ifname(struct wpa_supplicant *wpa_s)
+{
+ if (wpa_s->driver->get_ifname) {
+ return wpa_s->driver->get_ifname(wpa_s->drv_priv);
+ }
+ return NULL;
+}
+
+static inline const char *
+wpa_driver_get_radio_name(struct wpa_supplicant *wpa_s)
+{
+ if (wpa_s->driver->get_radio_name)
+ return wpa_s->driver->get_radio_name(wpa_s->drv_priv);
+ return NULL;
+}
+
+static inline const u8 * wpa_drv_get_mac_addr(struct wpa_supplicant *wpa_s)
+{
+ if (wpa_s->driver->get_mac_addr) {
+ return wpa_s->driver->get_mac_addr(wpa_s->drv_priv);
+ }
+ return NULL;
+}
+
+static inline int wpa_drv_set_operstate(struct wpa_supplicant *wpa_s,
+ int state)
+{
+ if (wpa_s->driver->set_operstate)
+ return wpa_s->driver->set_operstate(wpa_s->drv_priv, state);
+ return 0;
+}
+
+static inline int wpa_drv_mlme_setprotection(struct wpa_supplicant *wpa_s,
+ const u8 *addr, int protect_type,
+ int key_type)
+{
+ if (wpa_s->driver->mlme_setprotection)
+ return wpa_s->driver->mlme_setprotection(wpa_s->drv_priv, addr,
+ protect_type,
+ key_type);
+ return 0;
+}
+
+static inline struct hostapd_hw_modes *
+wpa_drv_get_hw_feature_data(struct wpa_supplicant *wpa_s, u16 *num_modes,
+ u16 *flags, u8 *dfs_domain)
+{
+ if (wpa_s->driver->get_hw_feature_data)
+ return wpa_s->driver->get_hw_feature_data(wpa_s->drv_priv,
+ num_modes, flags,
+ dfs_domain);
+ return NULL;
+}
+
+static inline int wpa_drv_set_country(struct wpa_supplicant *wpa_s,
+ const char *alpha2)
+{
+ if (wpa_s->driver->set_country)
+ return wpa_s->driver->set_country(wpa_s->drv_priv, alpha2);
+ return 0;
+}
+
+static inline int wpa_drv_send_mlme(struct wpa_supplicant *wpa_s,
+ const u8 *data, size_t data_len, int noack,
+ unsigned int freq, unsigned int wait)
+{
+ if (wpa_s->driver->send_mlme)
+ return wpa_s->driver->send_mlme(wpa_s->drv_priv,
+ data, data_len, noack,
+ freq, NULL, 0, 0, wait);
+ return -1;
+}
+
+static inline int wpa_drv_update_ft_ies(struct wpa_supplicant *wpa_s,
+ const u8 *md,
+ const u8 *ies, size_t ies_len)
+{
+ if (wpa_s->driver->update_ft_ies)
+ return wpa_s->driver->update_ft_ies(wpa_s->drv_priv, md,
+ ies, ies_len);
+ return -1;
+}
+
+static inline int wpa_drv_set_ap(struct wpa_supplicant *wpa_s,
+ struct wpa_driver_ap_params *params)
+{
+ if (wpa_s->driver->set_ap)
+ return wpa_s->driver->set_ap(wpa_s->drv_priv, params);
+ return -1;
+}
+
+static inline int wpa_drv_sta_add(struct wpa_supplicant *wpa_s,
+ struct hostapd_sta_add_params *params)
+{
+ if (wpa_s->driver->sta_add)
+ return wpa_s->driver->sta_add(wpa_s->drv_priv, params);
+ return -1;
+}
+
+static inline int wpa_drv_sta_remove(struct wpa_supplicant *wpa_s,
+ const u8 *addr)
+{
+ if (wpa_s->driver->sta_remove)
+ return wpa_s->driver->sta_remove(wpa_s->drv_priv, addr);
+ return -1;
+}
+
+static inline int wpa_drv_tx_control_port(struct wpa_supplicant *wpa_s,
+ const u8 *dest, u16 proto,
+ const u8 *buf, size_t len,
+ int no_encrypt)
+{
+ if (!wpa_s->driver->tx_control_port)
+ return -1;
+ return wpa_s->driver->tx_control_port(wpa_s->drv_priv, dest, proto,
+ buf, len, no_encrypt);
+}
+
+static inline int wpa_drv_hapd_send_eapol(struct wpa_supplicant *wpa_s,
+ const u8 *addr, const u8 *data,
+ size_t data_len, int encrypt,
+ const u8 *own_addr, u32 flags)
+{
+ if (wpa_s->driver->hapd_send_eapol)
+ return wpa_s->driver->hapd_send_eapol(wpa_s->drv_priv, addr,
+ data, data_len, encrypt,
+ own_addr, flags);
+ return -1;
+}
+
+static inline int wpa_drv_sta_set_flags(struct wpa_supplicant *wpa_s,
+ const u8 *addr, int total_flags,
+ int flags_or, int flags_and)
+{
+ if (wpa_s->driver->sta_set_flags)
+ return wpa_s->driver->sta_set_flags(wpa_s->drv_priv, addr,
+ total_flags, flags_or,
+ flags_and);
+ return -1;
+}
+
+static inline int wpa_drv_set_supp_port(struct wpa_supplicant *wpa_s,
+ int authorized)
+{
+ if (wpa_s->driver->set_supp_port) {
+ return wpa_s->driver->set_supp_port(wpa_s->drv_priv,
+ authorized);
+ }
+ return 0;
+}
+
+static inline int wpa_drv_send_action(struct wpa_supplicant *wpa_s,
+ unsigned int freq,
+ unsigned int wait,
+ const u8 *dst, const u8 *src,
+ const u8 *bssid,
+ const u8 *data, size_t data_len,
+ int no_cck)
+{
+ if (wpa_s->driver->send_action)
+ return wpa_s->driver->send_action(wpa_s->drv_priv, freq,
+ wait, dst, src, bssid,
+ data, data_len, no_cck);
+ return -1;
+}
+
+static inline void wpa_drv_send_action_cancel_wait(struct wpa_supplicant *wpa_s)
+{
+ if (wpa_s->driver->send_action_cancel_wait)
+ wpa_s->driver->send_action_cancel_wait(wpa_s->drv_priv);
+}
+
+static inline int wpa_drv_set_freq(struct wpa_supplicant *wpa_s,
+ struct hostapd_freq_params *freq)
+{
+ if (wpa_s->driver->set_freq)
+ return wpa_s->driver->set_freq(wpa_s->drv_priv, freq);
+ return -1;
+}
+
+static inline int wpa_drv_if_add(struct wpa_supplicant *wpa_s,
+ enum wpa_driver_if_type type,
+ const char *ifname, const u8 *addr,
+ void *bss_ctx, char *force_ifname,
+ u8 *if_addr, const char *bridge)
+{
+ if (wpa_s->driver->if_add)
+ return wpa_s->driver->if_add(wpa_s->drv_priv, type, ifname,
+ addr, bss_ctx, NULL, force_ifname,
+ if_addr, bridge, 0, 0);
+ return -1;
+}
+
+static inline int wpa_drv_if_remove(struct wpa_supplicant *wpa_s,
+ enum wpa_driver_if_type type,
+ const char *ifname)
+{
+ if (wpa_s->driver->if_remove)
+ return wpa_s->driver->if_remove(wpa_s->drv_priv, type, ifname);
+ return -1;
+}
+
+static inline int wpa_drv_remain_on_channel(struct wpa_supplicant *wpa_s,
+ unsigned int freq,
+ unsigned int duration)
+{
+ if (wpa_s->driver->remain_on_channel)
+ return wpa_s->driver->remain_on_channel(wpa_s->drv_priv, freq,
+ duration);
+ return -1;
+}
+
+static inline int wpa_drv_cancel_remain_on_channel(
+ struct wpa_supplicant *wpa_s)
+{
+ if (wpa_s->driver->cancel_remain_on_channel)
+ return wpa_s->driver->cancel_remain_on_channel(
+ wpa_s->drv_priv);
+ return -1;
+}
+
+static inline int wpa_drv_probe_req_report(struct wpa_supplicant *wpa_s,
+ int report)
+{
+ if (wpa_s->driver->probe_req_report)
+ return wpa_s->driver->probe_req_report(wpa_s->drv_priv,
+ report);
+ return -1;
+}
+
+static inline int wpa_drv_deinit_ap(struct wpa_supplicant *wpa_s)
+{
+ if (wpa_s->driver->deinit_ap)
+ return wpa_s->driver->deinit_ap(wpa_s->drv_priv);
+ return 0;
+}
+
+static inline int wpa_drv_deinit_p2p_cli(struct wpa_supplicant *wpa_s)
+{
+ if (wpa_s->driver->deinit_p2p_cli)
+ return wpa_s->driver->deinit_p2p_cli(wpa_s->drv_priv);
+ return 0;
+}
+
+static inline void wpa_drv_suspend(struct wpa_supplicant *wpa_s)
+{
+ if (wpa_s->driver->suspend)
+ wpa_s->driver->suspend(wpa_s->drv_priv);
+}
+
+static inline void wpa_drv_resume(struct wpa_supplicant *wpa_s)
+{
+ if (wpa_s->driver->resume)
+ wpa_s->driver->resume(wpa_s->drv_priv);
+}
+
+static inline int wpa_drv_signal_monitor(struct wpa_supplicant *wpa_s,
+ int threshold, int hysteresis)
+{
+ if (wpa_s->driver->signal_monitor)
+ return wpa_s->driver->signal_monitor(wpa_s->drv_priv,
+ threshold, hysteresis);
+ return -1;
+}
+
+int wpa_drv_signal_poll(struct wpa_supplicant *wpa_s,
+ struct wpa_signal_info *si);
+
+static inline int wpa_drv_channel_info(struct wpa_supplicant *wpa_s,
+ struct wpa_channel_info *ci)
+{
+ if (wpa_s->driver->channel_info)
+ return wpa_s->driver->channel_info(wpa_s->drv_priv, ci);
+ return -1;
+}
+
+static inline int wpa_drv_pktcnt_poll(struct wpa_supplicant *wpa_s,
+ struct hostap_sta_driver_data *sta)
+{
+ if (wpa_s->driver->read_sta_data)
+ return wpa_s->driver->read_sta_data(wpa_s->drv_priv, sta,
+ wpa_s->bssid);
+ return -1;
+}
+
+static inline int wpa_drv_set_ap_wps_ie(struct wpa_supplicant *wpa_s,
+ const struct wpabuf *beacon,
+ const struct wpabuf *proberesp,
+ const struct wpabuf *assocresp)
+{
+ if (!wpa_s->driver->set_ap_wps_ie)
+ return -1;
+ return wpa_s->driver->set_ap_wps_ie(wpa_s->drv_priv, beacon,
+ proberesp, assocresp);
+}
+
+static inline int wpa_drv_get_noa(struct wpa_supplicant *wpa_s,
+ u8 *buf, size_t buf_len)
+{
+ if (!wpa_s->driver->get_noa)
+ return -1;
+ return wpa_s->driver->get_noa(wpa_s->drv_priv, buf, buf_len);
+}
+
+static inline int wpa_drv_set_p2p_powersave(struct wpa_supplicant *wpa_s,
+ int legacy_ps, int opp_ps,
+ int ctwindow)
+{
+ if (!wpa_s->driver->set_p2p_powersave)
+ return -1;
+ return wpa_s->driver->set_p2p_powersave(wpa_s->drv_priv, legacy_ps,
+ opp_ps, ctwindow);
+}
+
+static inline int wpa_drv_ampdu(struct wpa_supplicant *wpa_s, int ampdu)
+{
+ if (!wpa_s->driver->ampdu)
+ return -1;
+ return wpa_s->driver->ampdu(wpa_s->drv_priv, ampdu);
+}
+
+static inline int wpa_drv_send_tdls_mgmt(struct wpa_supplicant *wpa_s,
+ const u8 *dst, u8 action_code,
+ u8 dialog_token, u16 status_code,
+ u32 peer_capab, int initiator,
+ const u8 *buf, size_t len)
+{
+ if (wpa_s->driver->send_tdls_mgmt) {
+ return wpa_s->driver->send_tdls_mgmt(wpa_s->drv_priv, dst,
+ action_code, dialog_token,
+ status_code, peer_capab,
+ initiator, buf, len);
+ }
+ return -1;
+}
+
+static inline int wpa_drv_tdls_oper(struct wpa_supplicant *wpa_s,
+ enum tdls_oper oper, const u8 *peer)
+{
+ if (!wpa_s->driver->tdls_oper)
+ return -1;
+ return wpa_s->driver->tdls_oper(wpa_s->drv_priv, oper, peer);
+}
+
+#ifdef ANDROID
+static inline int wpa_drv_driver_cmd(struct wpa_supplicant *wpa_s,
+ char *cmd, char *buf, size_t buf_len)
+{
+ if (!wpa_s->driver->driver_cmd)
+ return -1;
+ return wpa_s->driver->driver_cmd(wpa_s->drv_priv, cmd, buf, buf_len);
+}
+#endif /* ANDROID */
+
+static inline void wpa_drv_set_rekey_info(struct wpa_supplicant *wpa_s,
+ const u8 *kek, size_t kek_len,
+ const u8 *kck, size_t kck_len,
+ const u8 *replay_ctr)
+{
+ if (!wpa_s->driver->set_rekey_info)
+ return;
+ wpa_s->driver->set_rekey_info(wpa_s->drv_priv, kek, kek_len,
+ kck, kck_len, replay_ctr);
+}
+
+static inline int wpa_drv_radio_disable(struct wpa_supplicant *wpa_s,
+ int disabled)
+{
+ if (!wpa_s->driver->radio_disable)
+ return -1;
+ return wpa_s->driver->radio_disable(wpa_s->drv_priv, disabled);
+}
+
+static inline int wpa_drv_switch_channel(struct wpa_supplicant *wpa_s,
+ struct csa_settings *settings)
+{
+ if (!wpa_s->driver->switch_channel)
+ return -1;
+ return wpa_s->driver->switch_channel(wpa_s->drv_priv, settings);
+}
+
+static inline int wpa_drv_add_ts(struct wpa_supplicant *wpa_s, u8 tsid,
+ const u8 *address, u8 user_priority,
+ u16 admitted_time)
+{
+ if (!wpa_s->driver->add_tx_ts)
+ return -1;
+ return wpa_s->driver->add_tx_ts(wpa_s->drv_priv, tsid, address,
+ user_priority, admitted_time);
+}
+
+static inline int wpa_drv_del_ts(struct wpa_supplicant *wpa_s, u8 tid,
+ const u8 *address)
+{
+ if (!wpa_s->driver->del_tx_ts)
+ return -1;
+ return wpa_s->driver->del_tx_ts(wpa_s->drv_priv, tid, address);
+}
+
+static inline int wpa_drv_tdls_enable_channel_switch(
+ struct wpa_supplicant *wpa_s, const u8 *addr, u8 oper_class,
+ const struct hostapd_freq_params *freq_params)
+{
+ if (!wpa_s->driver->tdls_enable_channel_switch)
+ return -1;
+ return wpa_s->driver->tdls_enable_channel_switch(wpa_s->drv_priv, addr,
+ oper_class,
+ freq_params);
+}
+
+static inline int
+wpa_drv_tdls_disable_channel_switch(struct wpa_supplicant *wpa_s,
+ const u8 *addr)
+{
+ if (!wpa_s->driver->tdls_disable_channel_switch)
+ return -1;
+ return wpa_s->driver->tdls_disable_channel_switch(wpa_s->drv_priv,
+ addr);
+}
+
+static inline int wpa_drv_wnm_oper(struct wpa_supplicant *wpa_s,
+ enum wnm_oper oper, const u8 *peer,
+ u8 *buf, u16 *buf_len)
+{
+ if (!wpa_s->driver->wnm_oper)
+ return -1;
+ return wpa_s->driver->wnm_oper(wpa_s->drv_priv, oper, peer, buf,
+ buf_len);
+}
+
+static inline int wpa_drv_status(struct wpa_supplicant *wpa_s,
+ char *buf, size_t buflen)
+{
+ if (!wpa_s->driver->status)
+ return -1;
+ return wpa_s->driver->status(wpa_s->drv_priv, buf, buflen);
+}
+
+static inline int wpa_drv_set_qos_map(struct wpa_supplicant *wpa_s,
+ const u8 *qos_map_set, u8 qos_map_set_len)
+{
+ if (!wpa_s->driver->set_qos_map)
+ return -1;
+ return wpa_s->driver->set_qos_map(wpa_s->drv_priv, qos_map_set,
+ qos_map_set_len);
+}
+
+static inline int wpa_drv_get_wowlan(struct wpa_supplicant *wpa_s)
+{
+ if (!wpa_s->driver->get_wowlan)
+ return 0;
+ return wpa_s->driver->get_wowlan(wpa_s->drv_priv);
+}
+
+static inline int wpa_drv_wowlan(struct wpa_supplicant *wpa_s,
+ const struct wowlan_triggers *triggers)
+{
+ if (!wpa_s->driver->set_wowlan)
+ return -1;
+ return wpa_s->driver->set_wowlan(wpa_s->drv_priv, triggers);
+}
+
+static inline int wpa_drv_vendor_cmd(struct wpa_supplicant *wpa_s,
+ int vendor_id, int subcmd, const u8 *data,
+ size_t data_len,
+ enum nested_attr nested_attr_flag,
+ struct wpabuf *buf)
+{
+ if (!wpa_s->driver->vendor_cmd)
+ return -1;
+ return wpa_s->driver->vendor_cmd(wpa_s->drv_priv, vendor_id, subcmd,
+ data, data_len, nested_attr_flag, buf);
+}
+
+static inline int wpa_drv_roaming(struct wpa_supplicant *wpa_s, int allowed,
+ const u8 *bssid)
+{
+ if (!wpa_s->driver->roaming)
+ return -1;
+ return wpa_s->driver->roaming(wpa_s->drv_priv, allowed, bssid);
+}
+
+static inline int wpa_drv_disable_fils(struct wpa_supplicant *wpa_s,
+ int disable)
+{
+ if (!wpa_s->driver->disable_fils)
+ return -1;
+ return wpa_s->driver->disable_fils(wpa_s->drv_priv, disable);
+}
+
+static inline int wpa_drv_set_mac_addr(struct wpa_supplicant *wpa_s,
+ const u8 *addr)
+{
+ if (!wpa_s->driver->set_mac_addr)
+ return -1;
+ return wpa_s->driver->set_mac_addr(wpa_s->drv_priv, addr);
+}
+
+
+#ifdef CONFIG_MACSEC
+
+static inline int wpa_drv_macsec_init(struct wpa_supplicant *wpa_s,
+ struct macsec_init_params *params)
+{
+ if (!wpa_s->driver->macsec_init)
+ return -1;
+ return wpa_s->driver->macsec_init(wpa_s->drv_priv, params);
+}
+
+static inline int wpa_drv_macsec_deinit(struct wpa_supplicant *wpa_s)
+{
+ if (!wpa_s->driver->macsec_deinit)
+ return -1;
+ return wpa_s->driver->macsec_deinit(wpa_s->drv_priv);
+}
+
+static inline int wpa_drv_macsec_get_capability(struct wpa_supplicant *wpa_s,
+ enum macsec_cap *cap)
+{
+ if (!wpa_s->driver->macsec_get_capability)
+ return -1;
+ return wpa_s->driver->macsec_get_capability(wpa_s->drv_priv, cap);
+}
+
+static inline int wpa_drv_enable_protect_frames(struct wpa_supplicant *wpa_s,
+ bool enabled)
+{
+ if (!wpa_s->driver->enable_protect_frames)
+ return -1;
+ return wpa_s->driver->enable_protect_frames(wpa_s->drv_priv, enabled);
+}
+
+static inline int wpa_drv_enable_encrypt(struct wpa_supplicant *wpa_s,
+ bool enabled)
+{
+ if (!wpa_s->driver->enable_encrypt)
+ return -1;
+ return wpa_s->driver->enable_encrypt(wpa_s->drv_priv, enabled);
+}
+
+static inline int wpa_drv_set_replay_protect(struct wpa_supplicant *wpa_s,
+ bool enabled, u32 window)
+{
+ if (!wpa_s->driver->set_replay_protect)
+ return -1;
+ return wpa_s->driver->set_replay_protect(wpa_s->drv_priv, enabled,
+ window);
+}
+
+static inline int wpa_drv_set_current_cipher_suite(struct wpa_supplicant *wpa_s,
+ u64 cs)
+{
+ if (!wpa_s->driver->set_current_cipher_suite)
+ return -1;
+ return wpa_s->driver->set_current_cipher_suite(wpa_s->drv_priv, cs);
+}
+
+static inline int wpa_drv_enable_controlled_port(struct wpa_supplicant *wpa_s,
+ bool enabled)
+{
+ if (!wpa_s->driver->enable_controlled_port)
+ return -1;
+ return wpa_s->driver->enable_controlled_port(wpa_s->drv_priv, enabled);
+}
+
+static inline int wpa_drv_get_receive_lowest_pn(struct wpa_supplicant *wpa_s,
+ struct receive_sa *sa)
+{
+ if (!wpa_s->driver->get_receive_lowest_pn)
+ return -1;
+ return wpa_s->driver->get_receive_lowest_pn(wpa_s->drv_priv, sa);
+}
+
+static inline int wpa_drv_get_transmit_next_pn(struct wpa_supplicant *wpa_s,
+ struct transmit_sa *sa)
+{
+ if (!wpa_s->driver->get_transmit_next_pn)
+ return -1;
+ return wpa_s->driver->get_transmit_next_pn(wpa_s->drv_priv, sa);
+}
+
+static inline int wpa_drv_set_transmit_next_pn(struct wpa_supplicant *wpa_s,
+ struct transmit_sa *sa)
+{
+ if (!wpa_s->driver->set_transmit_next_pn)
+ return -1;
+ return wpa_s->driver->set_transmit_next_pn(wpa_s->drv_priv, sa);
+}
+
+static inline int wpa_drv_set_receive_lowest_pn(struct wpa_supplicant *wpa_s,
+ struct receive_sa *sa)
+{
+ if (!wpa_s->driver->set_receive_lowest_pn)
+ return -1;
+ return wpa_s->driver->set_receive_lowest_pn(wpa_s->drv_priv, sa);
+}
+
+static inline int
+wpa_drv_create_receive_sc(struct wpa_supplicant *wpa_s, struct receive_sc *sc,
+ unsigned int conf_offset, int validation)
+{
+ if (!wpa_s->driver->create_receive_sc)
+ return -1;
+ return wpa_s->driver->create_receive_sc(wpa_s->drv_priv, sc,
+ conf_offset, validation);
+}
+
+static inline int wpa_drv_delete_receive_sc(struct wpa_supplicant *wpa_s,
+ struct receive_sc *sc)
+{
+ if (!wpa_s->driver->delete_receive_sc)
+ return -1;
+ return wpa_s->driver->delete_receive_sc(wpa_s->drv_priv, sc);
+}
+
+static inline int wpa_drv_create_receive_sa(struct wpa_supplicant *wpa_s,
+ struct receive_sa *sa)
+{
+ if (!wpa_s->driver->create_receive_sa)
+ return -1;
+ return wpa_s->driver->create_receive_sa(wpa_s->drv_priv, sa);
+}
+
+static inline int wpa_drv_delete_receive_sa(struct wpa_supplicant *wpa_s,
+ struct receive_sa *sa)
+{
+ if (!wpa_s->driver->delete_receive_sa)
+ return -1;
+ return wpa_s->driver->delete_receive_sa(wpa_s->drv_priv, sa);
+}
+
+static inline int wpa_drv_enable_receive_sa(struct wpa_supplicant *wpa_s,
+ struct receive_sa *sa)
+{
+ if (!wpa_s->driver->enable_receive_sa)
+ return -1;
+ return wpa_s->driver->enable_receive_sa(wpa_s->drv_priv, sa);
+}
+
+static inline int wpa_drv_disable_receive_sa(struct wpa_supplicant *wpa_s,
+ struct receive_sa *sa)
+{
+ if (!wpa_s->driver->disable_receive_sa)
+ return -1;
+ return wpa_s->driver->disable_receive_sa(wpa_s->drv_priv, sa);
+}
+
+static inline int
+wpa_drv_create_transmit_sc(struct wpa_supplicant *wpa_s, struct transmit_sc *sc,
+ unsigned int conf_offset)
+{
+ if (!wpa_s->driver->create_transmit_sc)
+ return -1;
+ return wpa_s->driver->create_transmit_sc(wpa_s->drv_priv, sc,
+ conf_offset);
+}
+
+static inline int wpa_drv_delete_transmit_sc(struct wpa_supplicant *wpa_s,
+ struct transmit_sc *sc)
+{
+ if (!wpa_s->driver->delete_transmit_sc)
+ return -1;
+ return wpa_s->driver->delete_transmit_sc(wpa_s->drv_priv, sc);
+}
+
+static inline int wpa_drv_create_transmit_sa(struct wpa_supplicant *wpa_s,
+ struct transmit_sa *sa)
+{
+ if (!wpa_s->driver->create_transmit_sa)
+ return -1;
+ return wpa_s->driver->create_transmit_sa(wpa_s->drv_priv, sa);
+}
+
+static inline int wpa_drv_delete_transmit_sa(struct wpa_supplicant *wpa_s,
+ struct transmit_sa *sa)
+{
+ if (!wpa_s->driver->delete_transmit_sa)
+ return -1;
+ return wpa_s->driver->delete_transmit_sa(wpa_s->drv_priv, sa);
+}
+
+static inline int wpa_drv_enable_transmit_sa(struct wpa_supplicant *wpa_s,
+ struct transmit_sa *sa)
+{
+ if (!wpa_s->driver->enable_transmit_sa)
+ return -1;
+ return wpa_s->driver->enable_transmit_sa(wpa_s->drv_priv, sa);
+}
+
+static inline int wpa_drv_disable_transmit_sa(struct wpa_supplicant *wpa_s,
+ struct transmit_sa *sa)
+{
+ if (!wpa_s->driver->disable_transmit_sa)
+ return -1;
+ return wpa_s->driver->disable_transmit_sa(wpa_s->drv_priv, sa);
+}
+#endif /* CONFIG_MACSEC */
+
+static inline int wpa_drv_setband(struct wpa_supplicant *wpa_s,
+ u32 band_mask)
+{
+ if (!wpa_s->driver->set_band)
+ return -1;
+ return wpa_s->driver->set_band(wpa_s->drv_priv, band_mask);
+}
+
+static inline int wpa_drv_get_pref_freq_list(struct wpa_supplicant *wpa_s,
+ enum wpa_driver_if_type if_type,
+ unsigned int *num,
+ unsigned int *freq_list)
+{
+#ifdef CONFIG_TESTING_OPTIONS
+ if (wpa_s->get_pref_freq_list_override)
+ return wpas_ctrl_iface_get_pref_freq_list_override(
+ wpa_s, if_type, num, freq_list);
+#endif /* CONFIG_TESTING_OPTIONS */
+ if (!wpa_s->driver->get_pref_freq_list)
+ return -1;
+ return wpa_s->driver->get_pref_freq_list(wpa_s->drv_priv, if_type,
+ num, freq_list);
+}
+
+static inline int wpa_drv_set_prob_oper_freq(struct wpa_supplicant *wpa_s,
+ unsigned int freq)
+{
+ if (!wpa_s->driver->set_prob_oper_freq)
+ return 0;
+ return wpa_s->driver->set_prob_oper_freq(wpa_s->drv_priv, freq);
+}
+
+static inline int wpa_drv_abort_scan(struct wpa_supplicant *wpa_s,
+ u64 scan_cookie)
+{
+ if (!wpa_s->driver->abort_scan)
+ return -1;
+ return wpa_s->driver->abort_scan(wpa_s->drv_priv, scan_cookie);
+}
+
+static inline int wpa_drv_configure_frame_filters(struct wpa_supplicant *wpa_s,
+ u32 filters)
+{
+ if (!wpa_s->driver->configure_data_frame_filters)
+ return -1;
+ return wpa_s->driver->configure_data_frame_filters(wpa_s->drv_priv,
+ filters);
+}
+
+static inline int wpa_drv_get_ext_capa(struct wpa_supplicant *wpa_s,
+ enum wpa_driver_if_type type)
+{
+ if (!wpa_s->driver->get_ext_capab)
+ return -1;
+ return wpa_s->driver->get_ext_capab(wpa_s->drv_priv, type,
+ &wpa_s->extended_capa,
+ &wpa_s->extended_capa_mask,
+ &wpa_s->extended_capa_len);
+}
+
+static inline int wpa_drv_p2p_lo_start(struct wpa_supplicant *wpa_s,
+ unsigned int channel,
+ unsigned int period,
+ unsigned int interval,
+ unsigned int count,
+ const u8 *device_types,
+ size_t dev_types_len,
+ const u8 *ies, size_t ies_len)
+{
+ if (!wpa_s->driver->p2p_lo_start)
+ return -1;
+ return wpa_s->driver->p2p_lo_start(wpa_s->drv_priv, channel, period,
+ interval, count, device_types,
+ dev_types_len, ies, ies_len);
+}
+
+static inline int wpa_drv_p2p_lo_stop(struct wpa_supplicant *wpa_s)
+{
+ if (!wpa_s->driver->p2p_lo_stop)
+ return -1;
+ return wpa_s->driver->p2p_lo_stop(wpa_s->drv_priv);
+}
+
+static inline int wpa_drv_set_default_scan_ies(struct wpa_supplicant *wpa_s,
+ const u8 *ies, size_t len)
+{
+ if (!wpa_s->driver->set_default_scan_ies)
+ return -1;
+ return wpa_s->driver->set_default_scan_ies(wpa_s->drv_priv, ies, len);
+}
+
+static inline int wpa_drv_set_tdls_mode(struct wpa_supplicant *wpa_s,
+ int tdls_external_control)
+{
+ if (!wpa_s->driver->set_tdls_mode)
+ return -1;
+ return wpa_s->driver->set_tdls_mode(wpa_s->drv_priv,
+ tdls_external_control);
+}
+
+static inline struct wpa_bss_candidate_info *
+wpa_drv_get_bss_trans_status(struct wpa_supplicant *wpa_s,
+ struct wpa_bss_trans_info *params)
+{
+ if (!wpa_s->driver->get_bss_transition_status)
+ return NULL;
+ return wpa_s->driver->get_bss_transition_status(wpa_s->drv_priv,
+ params);
+}
+
+static inline int wpa_drv_ignore_assoc_disallow(struct wpa_supplicant *wpa_s,
+ int val)
+{
+ if (!wpa_s->driver->ignore_assoc_disallow)
+ return -1;
+ return wpa_s->driver->ignore_assoc_disallow(wpa_s->drv_priv, val);
+}
+
+static inline int wpa_drv_set_bssid_tmp_disallow(struct wpa_supplicant *wpa_s,
+ unsigned int num_bssid,
+ const u8 *bssids)
+{
+ if (!wpa_s->driver->set_bssid_tmp_disallow)
+ return -1;
+ return wpa_s->driver->set_bssid_tmp_disallow(wpa_s->drv_priv, num_bssid,
+ bssids);
+}
+
+static inline int wpa_drv_update_connect_params(
+ struct wpa_supplicant *wpa_s,
+ struct wpa_driver_associate_params *params,
+ enum wpa_drv_update_connect_params_mask mask)
+{
+ if (!wpa_s->driver->update_connect_params)
+ return -1;
+ return wpa_s->driver->update_connect_params(wpa_s->drv_priv, params,
+ mask);
+}
+
+static inline int
+wpa_drv_send_external_auth_status(struct wpa_supplicant *wpa_s,
+ struct external_auth *params)
+{
+ if (!wpa_s->driver->send_external_auth_status)
+ return -1;
+ return wpa_s->driver->send_external_auth_status(wpa_s->drv_priv,
+ params);
+}
+
+static inline int wpa_drv_set_4addr_mode(struct wpa_supplicant *wpa_s, int val)
+{
+ if (!wpa_s->driver->set_4addr_mode)
+ return -1;
+ return wpa_s->driver->set_4addr_mode(wpa_s->drv_priv,
+ wpa_s->bridge_ifname, val);
+}
+
+static inline int wpa_drv_dpp_listen(struct wpa_supplicant *wpa_s, bool enable)
+{
+ if (!wpa_s->driver->dpp_listen)
+ return 0;
+ return wpa_s->driver->dpp_listen(wpa_s->drv_priv, enable);
+}
+
+#endif /* DRIVER_I_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/eap_proxy_dummy.mak b/ap/app/wpa_supplicant-2.10/wpa_supplicant/eap_proxy_dummy.mak
new file mode 100755
index 0000000..e69de29
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/eap_proxy_dummy.mak
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/eap_testing.txt b/ap/app/wpa_supplicant-2.10/wpa_supplicant/eap_testing.txt
new file mode 100755
index 0000000..8d13222
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/eap_testing.txt
@@ -0,0 +1,392 @@
+Automatic regression and interoperability testing of wpa_supplicant's
+IEEE 802.1X/EAPOL authentication
+
+Test program:
+- Linked some parts of IEEE 802.1X Authenticator implementation from
+ hostapd (RADIUS client and RADIUS processing, EAP<->RADIUS
+ encapsulation/decapsulation) into wpa_supplicant.
+- Replaced wpa_supplicant.c and wpa.c with test code that trigger
+ IEEE 802.1X authentication automatically without need for wireless
+ client card or AP.
+- For EAP methods that generate keying material, the key derived by the
+ Supplicant is verified to match with the one received by the (now
+ integrated) Authenticator.
+
+The full automated test suite can now be run in couple of seconds, but
+I'm more than willing to add new RADIUS authentication servers to make
+this take a bit more time.. ;-) As an extra bonus, this can also be
+seen as automatic regression/interoperability testing for the RADIUS
+server, too.
+
+In order for me to be able to use a new authentication server, the
+server need to be available from Internet (at least from one static IP
+address) and I will need to get suitable user name/password pairs,
+certificates, and private keys for testing use. Other alternative
+would be to get an evaluation version of the server so that I can
+install it on my own test setup. If you are interested in providing
+either server access or evaluation version, please contact me
+(j@w1.fi).
+
+
+Test matrix
+
++) tested successfully
+F) failed
+-) server did not support
+?) not tested
+
+Cisco ACS ----------------------------------------------------------.
+hostapd --------------------------------------------------------. |
+Cisco Aironet 1200 AP (local RADIUS server) ----------------. | |
+Periodik Labs Elektron ---------------------------------. | | |
+Lucent NavisRadius ---------------------------------. | | | |
+Interlink RAD-Series ---------------------------. | | | | |
+Radiator -----------------------------------. | | | | | |
+Meetinghouse Aegis ---------------------. | | | | | | |
+Funk Steel-Belted ------------------. | | | | | | | |
+Funk Odyssey -------------------. | | | | | | | | |
+Microsoft IAS --------------. | | | | | | | | | |
+FreeRADIUS -------------. | | | | | | | | | | |
+ | | | | | | | | | | | |
+
+EAP-MD5 + - - + + + + + - - + +
+EAP-GTC + - - ? + + + + - - + -
+EAP-OTP - - - - - + - - - - - -
+EAP-MSCHAPv2 + - - + + + + + - - + -
+EAP-TLS + + + + + + + + - - + +
+EAP-PEAPv0/MSCHAPv2 + + + + + + + + + - + +
+EAP-PEAPv0/GTC + - + - + + + + - - + +
+EAP-PEAPv0/OTP - - - - - + - - - - - -
+EAP-PEAPv0/MD5 + - - + + + + + - - + -
+EAP-PEAPv0/TLS + + - + + + F + - - + +
+EAP-PEAPv0/SIM - - - - - - - - - - + -
+EAP-PEAPv0/AKA - - - - - - - - - - + -
+EAP-PEAPv0/PSK - - - - - - - - - - + -
+EAP-PEAPv0/PAX - - - - - - - - - - + -
+EAP-PEAPv0/SAKE - - - - - - - - - - + -
+EAP-PEAPv0/GPSK - - - - - - - - - - + -
+EAP-PEAPv1/MSCHAPv2 - - + + + +1 + +5 +8 - + +
+EAP-PEAPv1/GTC - - + + + +1 + +5 +8 - + +
+EAP-PEAPv1/OTP - - - - - +1 - - - - - -
+EAP-PEAPv1/MD5 - - - + + +1 + +5 - - + -
+EAP-PEAPv1/TLS - - - + + +1 F +5 - - + +
+EAP-PEAPv1/SIM - - - - - - - - - - + -
+EAP-PEAPv1/AKA - - - - - - - - - - + -
+EAP-PEAPv1/PSK - - - - - - - - - - + -
+EAP-PEAPv1/PAX - - - - - - - - - - + -
+EAP-PEAPv1/SAKE - - - - - - - - - - + -
+EAP-PEAPv1/GPSK - - - - - - - - - - + -
+EAP-TTLS/CHAP + - +2 + + + + + + - + -
+EAP-TTLS/MSCHAP + - + + + + + + + - + -
+EAP-TTLS/MSCHAPv2 + - + + + + + + + - + -
+EAP-TTLS/PAP + - + + + + + + + - + -
+EAP-TTLS/EAP-MD5 + - +2 + + + + + + - + -
+EAP-TTLS/EAP-GTC + - +2 ? + + + + - - + -
+EAP-TTLS/EAP-OTP - - - - - + - - - - - -
+EAP-TTLS/EAP-MSCHAPv2 + - +2 + + + + + + - + -
+EAP-TTLS/EAP-TLS + - +2 + F + + + - - + -
+EAP-TTLS/EAP-SIM - - - - - - - - - - + -
+EAP-TTLS/EAP-AKA - - - - - - - - - - + -
+EAP-TTLS/EAP-PSK - - - - - - - - - - + -
+EAP-TTLS/EAP-PAX - - - - - - - - - - + -
+EAP-TTLS/EAP-SAKE - - - - - - - - - - + -
+EAP-TTLS/EAP-GPSK - - - - - - - - - - + -
+EAP-TTLS + TNC - - - - - + - - - - + -
+EAP-SIM + - - ? - + - ? - - + -
+EAP-AKA - - - - - + - - - - + -
+EAP-AKA' - - - - - - - - - - + -
+EAP-PSK +7 - - - - + - - - - + -
+EAP-PAX - - - - - + - - - - + -
+EAP-SAKE - - - - - - - - - - + -
+EAP-GPSK - - - - - - - - - - + -
+EAP-FAST/MSCHAPv2(prov) - - - + - + - - - + + +
+EAP-FAST/GTC(auth) - - - + - + - - - + + +
+EAP-FAST/MSCHAPv2(aprov)- - - - - + - - - - + +
+EAP-FAST/GTC(aprov) - - - - - + - - - - + +
+EAP-FAST/MD5(aprov) - - - - - + - - - - + -
+EAP-FAST/TLS(aprov) - - - - - - - - - - + +
+EAP-FAST/SIM(aprov) - - - - - - - - - - + -
+EAP-FAST/AKA(aprov) - - - - - - - - - - + -
+EAP-FAST/MSCHAPv2(auth) - - - - - + - - - - + +
+EAP-FAST/MD5(auth) - - - - - + - - - - + -
+EAP-FAST/TLS(auth) - - - - - - - - - - + +
+EAP-FAST/SIM(auth) - - - - - - - - - - + -
+EAP-FAST/AKA(auth) - - - - - - - - - - + -
+EAP-FAST + TNC - - - - - - - - - - + -
+LEAP + - + + + + F +6 - + - +
+EAP-TNC +9 - - - - + - - - - + -
+EAP-IKEv2 +10 - - - - - - - - - + -
+
+1) PEAPv1 required new label, "client PEAP encryption" instead of "client EAP
+ encryption", during key derivation (requires phase1="peaplabel=1" in the
+ network configuration in wpa_supplicant.conf)
+2) used FreeRADIUS as inner auth server
+5) PEAPv1 required termination of negotiation on tunneled EAP-Success and new
+ label in key deriviation
+ (phase1="peap_outer_success=0 peaplabel=1") (in "IETF Draft 5" mode)
+6) Authenticator simulator required patching for handling Access-Accept within
+ negotiation (for the first EAP-Success of LEAP)
+7) tested only with an older (incompatible) draft of EAP-PSK; FreeRADIUS does
+ not support the current EAP-PSK (RFC) specification
+8) PEAPv1 used non-standard version negotiation (client had to force v1 even
+ though server reported v0 as the highest supported version)
+9) only EAP-TTLS/EAP-TNC tested, i.e., test did not include proper sequence of
+ client authentication followed by TNC inside the tunnel
+10) worked only with special compatibility code to match the IKEv2 server
+ implementation
+
+
+Automated tests:
+
+FreeRADIUS (2.0-beta/CVS snapshot)
+- EAP-MD5-Challenge
+- EAP-GTC
+- EAP-MSCHAPv2
+- EAP-TLS
+- EAP-PEAPv0 / MSCHAPv2
+- EAP-PEAPv0 / GTC
+- EAP-PEAPv0 / MD5-Challenge
+- EAP-PEAPv0 / TLS
+- EAP-TTLS / EAP-MD5-Challenge
+- EAP-TTLS / EAP-GTC
+- EAP-TTLS / EAP-MSCHAPv2
+- EAP-TTLS / EAP-TLS
+- EAP-TTLS / CHAP
+- EAP-TTLS / PAP
+- EAP-TTLS / MSCHAP
+- EAP-TTLS / MSCHAPv2
+- EAP-TTLS / EAP-TNC (partial support; no authentication sequence)
+- EAP-SIM
+- LEAP
+
+Microsoft Windows Server 2003 / IAS
+- EAP-TLS
+- EAP-PEAPv0 / MSCHAPv2
+- EAP-PEAPv0 / TLS
+- EAP-MD5
+* IAS does not seem to support other EAP methods
+
+Funk Odyssey 2.01.00.653
+- EAP-TLS
+- EAP-PEAPv0 / MSCHAPv2
+- EAP-PEAPv0 / GTC
+- EAP-PEAPv1 / MSCHAPv2
+- EAP-PEAPv1 / GTC
+ Note: PEAPv1 requires TLS key derivation to use label "client EAP encryption"
+- EAP-TTLS / CHAP (using FreeRADIUS as inner auth srv)
+- EAP-TTLS / MSCHAP
+- EAP-TTLS / MSCHAPv2
+- EAP-TTLS / PAP
+- EAP-TTLS / EAP-MD5-Challenge (using FreeRADIUS as inner auth srv)
+- EAP-TTLS / EAP-GTC (using FreeRADIUS as inner auth srv)
+- EAP-TTLS / EAP-MSCHAPv2 (using FreeRADIUS as inner auth srv)
+- EAP-TTLS / EAP-TLS (using FreeRADIUS as inner auth srv)
+* not supported in Odyssey:
+ - EAP-MD5-Challenge
+ - EAP-GTC
+ - EAP-MSCHAPv2
+ - EAP-PEAP / MD5-Challenge
+ - EAP-PEAP / TLS
+
+Funk Steel-Belted Radius Enterprise Edition v4.71.739
+- EAP-MD5-Challenge
+- EAP-MSCHAPv2
+- EAP-TLS
+- EAP-PEAPv0 / MSCHAPv2
+- EAP-PEAPv0 / MD5
+- EAP-PEAPv0 / TLS
+- EAP-PEAPv1 / MSCHAPv2
+- EAP-PEAPv1 / MD5
+- EAP-PEAPv1 / GTC
+- EAP-PEAPv1 / TLS
+ Note: PEAPv1 requires TLS key derivation to use label "client EAP encryption"
+- EAP-TTLS / CHAP
+- EAP-TTLS / MSCHAP
+- EAP-TTLS / MSCHAPv2
+- EAP-TTLS / PAP
+- EAP-TTLS / EAP-MD5-Challenge
+- EAP-TTLS / EAP-MSCHAPv2
+- EAP-TTLS / EAP-TLS
+
+Meetinghouse Aegis 1.1.4
+- EAP-MD5-Challenge
+- EAP-GTC
+- EAP-MSCHAPv2
+- EAP-TLS
+- EAP-PEAPv0 / MSCHAPv2
+- EAP-PEAPv0 / TLS
+- EAP-PEAPv0 / GTC
+- EAP-PEAPv0 / MD5-Challenge
+- EAP-PEAPv1 / MSCHAPv2
+- EAP-PEAPv1 / TLS
+- EAP-PEAPv1 / GTC
+- EAP-PEAPv1 / MD5-Challenge
+ Note: PEAPv1 requires TLS key derivation to use label "client EAP encryption"
+- EAP-TTLS / CHAP
+- EAP-TTLS / MSCHAP
+- EAP-TTLS / MSCHAPv2
+- EAP-TTLS / PAP
+- EAP-TTLS / EAP-MD5-Challenge
+- EAP-TTLS / EAP-GTC
+- EAP-TTLS / EAP-MSCHAPv2
+* did not work
+ - EAP-TTLS / EAP-TLS
+ (Server rejects authentication without any reason in debug log. It
+ looks like the inner TLS negotiation starts properly and the last
+ packet from Supplicant looks like the one sent in the Phase 1. The
+ server generates a valid looking reply in the same way as in Phase
+ 1, but then ends up sending Access-Reject. Maybe an issue with TTLS
+ fragmentation in the Aegis server(?) The packet seems to include
+ 1328 bytes of EAP-Message and this may go beyond the fragmentation
+ limit with AVP encapsulation and TLS tunneling. Note: EAP-PEAP/TLS
+ did work, so this issue seems to be with something TTLS specific.)
+
+Radiator 3.17.1 (eval, with all patches up to and including 2007-05-25)
+- EAP-MD5-Challenge
+- EAP-GTC
+- EAP-OTP
+- EAP-MSCHAPv2
+- EAP-TLS
+- EAP-PEAPv0 / MSCHAPv2
+- EAP-PEAPv0 / GTC
+- EAP-PEAPv0 / OTP
+- EAP-PEAPv0 / MD5-Challenge
+- EAP-PEAPv0 / TLS
+ Note: Needed to use unknown identity in outer auth and some times the server
+ seems to get confused and fails to send proper Phase 2 data.
+- EAP-PEAPv1 / MSCHAPv2
+- EAP-PEAPv1 / GTC
+- EAP-PEAPv1 / OTP
+- EAP-PEAPv1 / MD5-Challenge
+- EAP-PEAPv1 / TLS
+ Note: This has some additional requirements for EAPTLS_MaxFragmentSize.
+ Using 1300 for outer auth and 500 for inner auth seemed to work.
+ Note: Needed to use unknown identity in outer auth and some times the server
+ seems to get confused and fails to send proper Phase 2 data.
+- EAP-TTLS / CHAP
+- EAP-TTLS / MSCHAP
+- EAP-TTLS / MSCHAPv2
+- EAP-TTLS / PAP
+- EAP-TTLS / EAP-MD5-Challenge
+- EAP-TTLS / EAP-GTC
+- EAP-TTLS / EAP-OTP
+- EAP-TTLS / EAP-MSCHAPv2
+- EAP-TTLS / EAP-TLS
+ Note: This has some additional requirements for EAPTLS_MaxFragmentSize.
+ Using 1300 for outer auth and 500 for inner auth seemed to work.
+- EAP-SIM
+- EAP-AKA
+- EAP-PSK
+- EAP-PAX
+- EAP-TNC
+
+Interlink Networks RAD-Series 6.1.2.7
+- EAP-MD5-Challenge
+- EAP-GTC
+- EAP-MSCHAPv2
+- EAP-TLS
+- EAP-PEAPv0 / MSCHAPv2
+- EAP-PEAPv0 / GTC
+- EAP-PEAPv0 / MD5-Challenge
+- EAP-PEAPv1 / MSCHAPv2
+- EAP-PEAPv1 / GTC
+- EAP-PEAPv1 / MD5-Challenge
+ Note: PEAPv1 requires TLS key derivation to use label "client EAP encryption"
+- EAP-TTLS / CHAP
+- EAP-TTLS / MSCHAP
+- EAP-TTLS / MSCHAPv2
+- EAP-TTLS / PAP
+- EAP-TTLS / EAP-MD5-Challenge
+- EAP-TTLS / EAP-GTC
+- EAP-TTLS / EAP-MSCHAPv2
+- EAP-TTLS / EAP-TLS
+* did not work
+ - EAP-PEAPv0 / TLS
+ - EAP-PEAPv1 / TLS
+ (Failed to decrypt Phase 2 data)
+
+Lucent NavisRadius 4.4.0
+- EAP-MD5-Challenge
+- EAP-GTC
+- EAP-MSCHAPv2
+- EAP-TLS
+- EAP-PEAPv0 / MD5-Challenge
+- EAP-PEAPv0 / MSCHAPv2
+- EAP-PEAPv0 / GTC
+- EAP-PEAPv0 / TLS
+- EAP-PEAPv1 / MD5-Challenge
+- EAP-PEAPv1 / MSCHAPv2
+- EAP-PEAPv1 / GTC
+- EAP-PEAPv1 / TLS
+ "IETF Draft 5" mode requires phase1="peap_outer_success=0 peaplabel=1"
+ 'Cisco ACU 5.05' mode works without phase1 configuration
+- EAP-TTLS / CHAP
+- EAP-TTLS / MSCHAP
+- EAP-TTLS / MSCHAPv2
+- EAP-TTLS / PAP
+- EAP-TTLS / EAP-MD5-Challenge
+- EAP-TTLS / EAP-MSCHAPv2
+- EAP-TTLS / EAP-GTC
+- EAP-TTLS / EAP-TLS
+
+Note: user certificate from NavisRadius had private key in a format
+that wpa_supplicant could not use. Converting this to PKCS#12 and then
+back to PEM allowed wpa_supplicant to use the key.
+
+
+hostapd v0.3.3
+- EAP-MD5-Challenge
+- EAP-GTC
+- EAP-MSCHAPv2
+- EAP-TLS
+- EAP-PEAPv0 / MSCHAPv2
+- EAP-PEAPv0 / GTC
+- EAP-PEAPv0 / MD5-Challenge
+- EAP-PEAPv1 / MSCHAPv2
+- EAP-PEAPv1 / GTC
+- EAP-PEAPv1 / MD5-Challenge
+- EAP-TTLS / CHAP
+- EAP-TTLS / MSCHAP
+- EAP-TTLS / MSCHAPv2
+- EAP-TTLS / PAP
+- EAP-TTLS / EAP-MD5-Challenge
+- EAP-TTLS / EAP-GTC
+- EAP-TTLS / EAP-MSCHAPv2
+- EAP-SIM
+- EAP-PAX
+
+PEAPv1:
+
+Funk Odyssey 2.01.00.653:
+- uses tunneled EAP-Success, expects reply in tunnel or TLS ACK, sends MPPE
+ keys with outer EAP-Success message after this
+- uses label "client EAP encryption"
+- (peap_outer_success 1 and 2 work)
+
+Funk Steel-Belted Radius Enterprise Edition v4.71.739
+- uses tunneled EAP-Success, expects reply in tunnel or TLS ACK, sends MPPE
+ keys with outer EAP-Success message after this
+- uses label "client EAP encryption"
+- (peap_outer_success 1 and 2 work)
+
+Radiator 3.9:
+- uses TLV Success and Reply, sends MPPE keys with outer EAP-Success message
+ after this
+- uses label "client PEAP encryption"
+
+Lucent NavisRadius 4.4.0 (in "IETF Draft 5" mode):
+- sends tunneled EAP-Success with MPPE keys and expects the authentication to
+ terminate at this point (gets somewhat confused with reply to this)
+- uses label "client PEAP encryption"
+- phase1="peap_outer_success=0 peaplabel=1"
+
+Lucent NavisRadius 4.4.0 (in "Cisco ACU 5.05" mode):
+- sends tunneled EAP-Success with MPPE keys and expects to receive TLS ACK
+ as a reply
+- uses label "client EAP encryption"
+
+Meetinghouse Aegis 1.1.4
+- uses tunneled EAP-Success, expects reply in tunnel or TLS ACK, sends MPPE
+ keys with outer EAP-Success message after this
+- uses label "client EAP encryption"
+- peap_outer_success 1 and 2 work
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/eapol_test.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/eapol_test.py
new file mode 100755
index 0000000..88c83f3
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/eapol_test.py
@@ -0,0 +1,159 @@
+#!/usr/bin/env python2
+#
+# eapol_test controller
+# Copyright (c) 2015, Jouni Malinen <j@w1.fi>
+#
+# This software may be distributed under the terms of the BSD license.
+# See README for more details.
+
+import argparse
+import logging
+import os
+import Queue
+import sys
+import threading
+
+logger = logging.getLogger()
+dir = os.path.dirname(os.path.realpath(sys.modules[__name__].__file__))
+sys.path.append(os.path.join(dir, '..', 'wpaspy'))
+import wpaspy
+wpas_ctrl = '/tmp/eapol_test'
+
+class eapol_test:
+ def __init__(self, ifname):
+ self.ifname = ifname
+ self.ctrl = wpaspy.Ctrl(os.path.join(wpas_ctrl, ifname))
+ if "PONG" not in self.ctrl.request("PING"):
+ raise Exception("Failed to connect to eapol_test (%s)" % ifname)
+ self.mon = wpaspy.Ctrl(os.path.join(wpas_ctrl, ifname))
+ self.mon.attach()
+
+ def add_network(self):
+ id = self.request("ADD_NETWORK")
+ if "FAIL" in id:
+ raise Exception("ADD_NETWORK failed")
+ return int(id)
+
+ def remove_network(self, id):
+ id = self.request("REMOVE_NETWORK " + str(id))
+ if "FAIL" in id:
+ raise Exception("REMOVE_NETWORK failed")
+ return None
+
+ def set_network(self, id, field, value):
+ res = self.request("SET_NETWORK " + str(id) + " " + field + " " + value)
+ if "FAIL" in res:
+ raise Exception("SET_NETWORK failed")
+ return None
+
+ def set_network_quoted(self, id, field, value):
+ res = self.request("SET_NETWORK " + str(id) + " " + field + ' "' + value + '"')
+ if "FAIL" in res:
+ raise Exception("SET_NETWORK failed")
+ return None
+
+ def request(self, cmd, timeout=10):
+ return self.ctrl.request(cmd, timeout=timeout)
+
+ def wait_event(self, events, timeout=10):
+ start = os.times()[4]
+ while True:
+ while self.mon.pending():
+ ev = self.mon.recv()
+ logger.debug(self.ifname + ": " + ev)
+ for event in events:
+ if event in ev:
+ return ev
+ now = os.times()[4]
+ remaining = start + timeout - now
+ if remaining <= 0:
+ break
+ if not self.mon.pending(timeout=remaining):
+ break
+ return None
+
+def run(ifname, count, no_fast_reauth, res, conf):
+ et = eapol_test(ifname)
+
+ et.request("AP_SCAN 0")
+ if no_fast_reauth:
+ et.request("SET fast_reauth 0")
+ else:
+ et.request("SET fast_reauth 1")
+ id = et.add_network()
+
+ if len(conf):
+ for item in conf:
+ et.set_network(id, item, conf[item])
+ else:
+ et.set_network(id, "key_mgmt", "IEEE8021X")
+ et.set_network(id, "eapol_flags", "0")
+ et.set_network(id, "eap", "TLS")
+ et.set_network_quoted(id, "identity", "user")
+ et.set_network_quoted(id, "ca_cert", 'ca.pem')
+ et.set_network_quoted(id, "client_cert", 'client.pem')
+ et.set_network_quoted(id, "private_key", 'client.key')
+ et.set_network_quoted(id, "private_key_passwd", 'whatever')
+
+ et.set_network(id, "disabled", "0")
+
+ fail = False
+ for i in range(count):
+ et.request("REASSOCIATE")
+ ev = et.wait_event(["CTRL-EVENT-CONNECTED", "CTRL-EVENT-EAP-FAILURE"])
+ if ev is None or "CTRL-EVENT-CONNECTED" not in ev:
+ fail = True
+ break
+
+ et.remove_network(id)
+
+ if fail:
+ res.put("FAIL (%d OK)" % i)
+ else:
+ res.put("PASS %d" % (i + 1))
+
+def main():
+ parser = argparse.ArgumentParser(description='eapol_test controller')
+ parser.add_argument('--ctrl', help='control interface directory')
+ parser.add_argument('--num', help='number of processes')
+ parser.add_argument('--iter', help='number of iterations')
+ parser.add_argument('--no-fast-reauth', action='store_true',
+ dest='no_fast_reauth',
+ help='disable TLS session resumption')
+ parser.add_argument('--conf', help='file of network conf items')
+ args = parser.parse_args()
+
+ num = int(args.num)
+ iter = int(args.iter)
+ if args.ctrl:
+ global wpas_ctrl
+ wpas_ctrl = args.ctrl
+
+ conf = {}
+ if args.conf:
+ f = open(args.conf, "r")
+ for line in f:
+ confitem = line.split("=")
+ if len(confitem) == 2:
+ conf[confitem[0].strip()] = confitem[1].strip()
+ f.close()
+
+ t = {}
+ res = {}
+ for i in range(num):
+ res[i] = Queue.Queue()
+ t[i] = threading.Thread(target=run, args=(str(i), iter,
+ args.no_fast_reauth, res[i],
+ conf))
+ for i in range(num):
+ t[i].start()
+ for i in range(num):
+ t[i].join()
+ try:
+ results = res[i].get(False)
+ except:
+ results = "N/A"
+ print("%d: %s" % (i, results))
+
+if __name__ == "__main__":
+ main()
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/60_wpa_supplicant b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/60_wpa_supplicant
new file mode 100755
index 0000000..39bd8e0
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/60_wpa_supplicant
@@ -0,0 +1,19 @@
+#!/bin/sh
+
+# /etc/pm/sleep.d/60_wpa_supplicant
+# Action script to notify wpa_supplicant of pm-action events.
+
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+WPACLI=wpa_cli
+
+case "$1" in
+ suspend|hibernate)
+ $WPACLI suspend
+ ;;
+ resume|thaw)
+ $WPACLI resume
+ ;;
+esac
+
+exit 0
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/dbus-listen-preq.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/dbus-listen-preq.py
new file mode 100755
index 0000000..337519f
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/dbus-listen-preq.py
@@ -0,0 +1,66 @@
+#!/usr/bin/python
+
+from __future__ import print_function
+import dbus
+import sys
+import time
+import gobject
+from dbus.mainloop.glib import DBusGMainLoop
+
+WPAS_DBUS_SERVICE = "fi.w1.wpa_supplicant1"
+WPAS_DBUS_INTERFACE = "fi.w1.wpa_supplicant1"
+WPAS_DBUS_OPATH = "/fi/w1/wpa_supplicant1"
+WPAS_DBUS_INTERFACES_INTERFACE = "fi.w1.wpa_supplicant1.Interface"
+
+def usage():
+ print("Usage: %s <ifname>" % sys.argv[0])
+ print("Press Ctrl-C to stop")
+
+def ProbeRequest(args):
+ if 'addr' in args:
+ print('%.2x:%.2x:%.2x:%.2x:%.2x:%.2x' % tuple(args['addr']),
+ end=' ')
+ if 'dst' in args:
+ print('-> %.2x:%.2x:%.2x:%.2x:%.2x:%.2x' % tuple(args['dst']),
+ end=' ')
+ if 'bssid' in args:
+ print('(bssid %.2x:%.2x:%.2x:%.2x:%.2x:%.2x)' % tuple(args['dst']),
+ end=' ')
+ if 'signal' in args:
+ print('signal:%d' % args['signal'], end=' ')
+ if 'ies' in args:
+ print('have IEs (%d bytes)' % len(args['ies']), end=' ')
+ print('')
+
+if __name__ == "__main__":
+ global bus
+ global wpas_obj
+ global if_obj
+ global p2p_iface
+
+ dbus.mainloop.glib.DBusGMainLoop(set_as_default=True)
+
+ bus = dbus.SystemBus()
+ wpas_obj = bus.get_object(WPAS_DBUS_SERVICE, WPAS_DBUS_OPATH)
+
+ # Print list of i/f if no one is specified
+ if (len(sys.argv) < 2) :
+ usage()
+ sys.exit(0)
+
+ wpas = dbus.Interface(wpas_obj, WPAS_DBUS_INTERFACE)
+
+ ifname = sys.argv[1]
+
+ path = wpas.GetInterface(ifname)
+
+ if_obj = bus.get_object(WPAS_DBUS_SERVICE, path)
+ iface = dbus.Interface(if_obj, WPAS_DBUS_INTERFACES_INTERFACE)
+
+ bus.add_signal_receiver(ProbeRequest,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="ProbeRequest")
+
+ iface.SubscribeProbeReq()
+
+ gobject.MainLoop().run()
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/dpp-nfc.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/dpp-nfc.py
new file mode 100755
index 0000000..8e865f3
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/dpp-nfc.py
@@ -0,0 +1,1186 @@
+#!/usr/bin/python3
+#
+# Example nfcpy to wpa_supplicant wrapper for DPP NFC operations
+# Copyright (c) 2012-2013, Jouni Malinen <j@w1.fi>
+# Copyright (c) 2019-2020, The Linux Foundation
+#
+# This software may be distributed under the terms of the BSD license.
+# See README for more details.
+
+import binascii
+import errno
+import os
+import struct
+import sys
+import time
+import threading
+import argparse
+
+import nfc
+import ndef
+
+import logging
+
+scriptsdir = os.path.dirname(os.path.realpath(sys.modules[__name__].__file__))
+sys.path.append(os.path.join(scriptsdir, '..', '..', 'wpaspy'))
+import wpaspy
+
+wpas_ctrl = '/var/run/wpa_supplicant'
+ifname = None
+init_on_touch = False
+in_raw_mode = False
+prev_tcgetattr = 0
+no_input = False
+continue_loop = True
+terminate_now = False
+summary_file = None
+success_file = None
+netrole = None
+operation_success = False
+mutex = threading.Lock()
+
+C_NORMAL = '\033[0m'
+C_RED = '\033[91m'
+C_GREEN = '\033[92m'
+C_YELLOW = '\033[93m'
+C_BLUE = '\033[94m'
+C_MAGENTA = '\033[95m'
+C_CYAN = '\033[96m'
+
+def summary(txt, color=None):
+ with mutex:
+ if color:
+ print(color + txt + C_NORMAL)
+ else:
+ print(txt)
+ if summary_file:
+ with open(summary_file, 'a') as f:
+ f.write(txt + "\n")
+
+def success_report(txt):
+ summary(txt)
+ if success_file:
+ with open(success_file, 'a') as f:
+ f.write(txt + "\n")
+
+def wpas_connect():
+ ifaces = []
+ if os.path.isdir(wpas_ctrl):
+ try:
+ ifaces = [os.path.join(wpas_ctrl, i) for i in os.listdir(wpas_ctrl)]
+ except OSError as error:
+ summary("Could not find wpa_supplicant: %s", str(error))
+ return None
+
+ if len(ifaces) < 1:
+ summary("No wpa_supplicant control interface found")
+ return None
+
+ for ctrl in ifaces:
+ if ifname and ifname not in ctrl:
+ continue
+ if os.path.basename(ctrl).startswith("p2p-dev-"):
+ # skip P2P management interface
+ continue
+ try:
+ summary("Trying to use control interface " + ctrl)
+ wpas = wpaspy.Ctrl(ctrl)
+ return wpas
+ except Exception as e:
+ pass
+ summary("Could not connect to wpa_supplicant")
+ return None
+
+def dpp_nfc_uri_process(uri):
+ wpas = wpas_connect()
+ if wpas is None:
+ return False
+ peer_id = wpas.request("DPP_NFC_URI " + uri)
+ if "FAIL" in peer_id:
+ summary("Could not parse DPP URI from NFC URI record", color=C_RED)
+ return False
+ peer_id = int(peer_id)
+ summary("peer_id=%d for URI from NFC Tag: %s" % (peer_id, uri))
+ cmd = "DPP_AUTH_INIT peer=%d" % peer_id
+ global enrollee_only, configurator_only, config_params
+ if enrollee_only:
+ cmd += " role=enrollee"
+ elif configurator_only:
+ cmd += " role=configurator"
+ if config_params:
+ cmd += " " + config_params
+ summary("Initiate DPP authentication: " + cmd)
+ res = wpas.request(cmd)
+ if "OK" not in res:
+ summary("Failed to initiate DPP Authentication", color=C_RED)
+ return False
+ summary("DPP Authentication initiated")
+ return True
+
+def dpp_hs_tag_read(record):
+ wpas = wpas_connect()
+ if wpas is None:
+ return False
+ summary(record)
+ if len(record.data) < 5:
+ summary("Too short DPP HS", color=C_RED)
+ return False
+ if record.data[0] != 0:
+ summary("Unexpected URI Identifier Code", color=C_RED)
+ return False
+ uribuf = record.data[1:]
+ try:
+ uri = uribuf.decode()
+ except:
+ summary("Invalid URI payload", color=C_RED)
+ return False
+ summary("URI: " + uri)
+ if not uri.startswith("DPP:"):
+ summary("Not a DPP URI", color=C_RED)
+ return False
+ return dpp_nfc_uri_process(uri)
+
+def get_status(wpas, extra=None):
+ if extra:
+ extra = "-" + extra
+ else:
+ extra = ""
+ res = wpas.request("STATUS" + extra)
+ lines = res.splitlines()
+ vals = dict()
+ for l in lines:
+ try:
+ [name, value] = l.split('=', 1)
+ except ValueError:
+ summary("Ignore unexpected status line: %s" % l)
+ continue
+ vals[name] = value
+ return vals
+
+def get_status_field(wpas, field, extra=None):
+ vals = get_status(wpas, extra)
+ if field in vals:
+ return vals[field]
+ return None
+
+def own_addr(wpas):
+ addr = get_status_field(wpas, "address")
+ if addr is None:
+ addr = get_status_field(wpas, "bssid[0]")
+ return addr
+
+def dpp_bootstrap_gen(wpas, type="qrcode", chan=None, mac=None, info=None,
+ curve=None, key=None):
+ cmd = "DPP_BOOTSTRAP_GEN type=" + type
+ if chan:
+ cmd += " chan=" + chan
+ if mac:
+ if mac is True:
+ mac = own_addr(wpas)
+ if mac is None:
+ summary("Could not determine local MAC address for bootstrap info")
+ else:
+ cmd += " mac=" + mac.replace(':', '')
+ if info:
+ cmd += " info=" + info
+ if curve:
+ cmd += " curve=" + curve
+ if key:
+ cmd += " key=" + key
+ res = wpas.request(cmd)
+ if "FAIL" in res:
+ raise Exception("Failed to generate bootstrapping info")
+ return int(res)
+
+def dpp_start_listen(wpas, freq):
+ if get_status_field(wpas, "bssid[0]"):
+ summary("Own AP freq: %s MHz" % str(get_status_field(wpas, "freq")))
+ if get_status_field(wpas, "beacon_set", extra="DRIVER") is None:
+ summary("Enable beaconing to have radio ready for RX")
+ wpas.request("DISABLE")
+ wpas.request("SET start_disabled 0")
+ wpas.request("ENABLE")
+ cmd = "DPP_LISTEN %d" % freq
+ global enrollee_only
+ global configurator_only
+ if enrollee_only:
+ cmd += " role=enrollee"
+ elif configurator_only:
+ cmd += " role=configurator"
+ global netrole
+ if netrole:
+ cmd += " netrole=" + netrole
+ summary(cmd)
+ res = wpas.request(cmd)
+ if "OK" not in res:
+ summary("Failed to start DPP listen", color=C_RED)
+ return False
+ return True
+
+def wpas_get_nfc_uri(start_listen=True, pick_channel=False, chan_override=None):
+ listen_freq = 2412
+ wpas = wpas_connect()
+ if wpas is None:
+ return None
+ global own_id, chanlist
+ if chan_override:
+ chan = chan_override
+ else:
+ chan = chanlist
+ if chan and chan.startswith("81/"):
+ listen_freq = int(chan[3:].split(',')[0]) * 5 + 2407
+ if chan is None and get_status_field(wpas, "bssid[0]"):
+ freq = get_status_field(wpas, "freq")
+ if freq:
+ freq = int(freq)
+ if freq >= 2412 and freq <= 2462:
+ chan = "81/%d" % ((freq - 2407) / 5)
+ summary("Use current AP operating channel (%d MHz) as the URI channel list (%s)" % (freq, chan))
+ listen_freq = freq
+ if chan is None and pick_channel:
+ chan = "81/6"
+ summary("Use channel 2437 MHz since no other preference provided")
+ listen_freq = 2437
+ own_id = dpp_bootstrap_gen(wpas, type="nfc-uri", chan=chan, mac=True)
+ res = wpas.request("DPP_BOOTSTRAP_GET_URI %d" % own_id).rstrip()
+ if "FAIL" in res:
+ return None
+ if start_listen:
+ if not dpp_start_listen(wpas, listen_freq):
+ raise Exception("Failed to start listen operation on %d MHz" % listen_freq)
+ return res
+
+def wpas_report_handover_req(uri):
+ wpas = wpas_connect()
+ if wpas is None:
+ return None
+ global own_id
+ cmd = "DPP_NFC_HANDOVER_REQ own=%d uri=%s" % (own_id, uri)
+ return wpas.request(cmd)
+
+def wpas_report_handover_sel(uri):
+ wpas = wpas_connect()
+ if wpas is None:
+ return None
+ global own_id
+ cmd = "DPP_NFC_HANDOVER_SEL own=%d uri=%s" % (own_id, uri)
+ return wpas.request(cmd)
+
+def dpp_handover_client(handover, alt=False):
+ summary("About to start run_dpp_handover_client (alt=%s)" % str(alt))
+ if alt:
+ handover.i_m_selector = False
+ run_dpp_handover_client(handover, alt)
+ summary("Done run_dpp_handover_client (alt=%s)" % str(alt))
+
+def run_client_alt(handover, alt):
+ if handover.start_client_alt and not alt:
+ handover.start_client_alt = False
+ summary("Try to send alternative handover request")
+ dpp_handover_client(handover, alt=True)
+
+class HandoverClient(nfc.handover.HandoverClient):
+ def __init__(self, handover, llc):
+ super(HandoverClient, self).__init__(llc)
+ self.handover = handover
+
+ def recv_records(self, timeout=None):
+ msg = self.recv_octets(timeout)
+ if msg is None:
+ return None
+ records = list(ndef.message_decoder(msg, 'relax'))
+ if records and records[0].type == 'urn:nfc:wkt:Hs':
+ summary("Handover client received message '{0}'".format(records[0].type))
+ return list(ndef.message_decoder(msg, 'relax'))
+ summary("Handover client received invalid message: %s" + binascii.hexlify(msg))
+ return None
+
+ def recv_octets(self, timeout=None):
+ start = time.time()
+ msg = bytearray()
+ while True:
+ poll_timeout = 0.1 if timeout is None or timeout > 0.1 else timeout
+ if not self.socket.poll('recv', poll_timeout):
+ if timeout:
+ timeout -= time.time() - start
+ if timeout <= 0:
+ return None
+ start = time.time()
+ continue
+ try:
+ r = self.socket.recv()
+ if r is None:
+ return None
+ msg += r
+ except TypeError:
+ return b''
+ try:
+ list(ndef.message_decoder(msg, 'strict', {}))
+ return bytes(msg)
+ except ndef.DecodeError:
+ if timeout:
+ timeout -= time.time() - start
+ if timeout <= 0:
+ return None
+ start = time.time()
+ continue
+ return None
+
+def run_dpp_handover_client(handover, alt=False):
+ chan_override = None
+ if alt:
+ chan_override = handover.altchanlist
+ handover.alt_proposal_used = True
+ global test_uri, test_alt_uri
+ if test_uri:
+ summary("TEST MODE: Using specified URI (alt=%s)" % str(alt))
+ uri = test_alt_uri if alt else test_uri
+ else:
+ uri = wpas_get_nfc_uri(start_listen=False, chan_override=chan_override)
+ if uri is None:
+ summary("Cannot start handover client - no bootstrap URI available",
+ color=C_RED)
+ return
+ handover.my_uri = uri
+ uri = ndef.UriRecord(uri)
+ summary("NFC URI record for DPP: " + str(uri))
+ carrier = ndef.Record('application/vnd.wfa.dpp', 'A', uri.data)
+ global test_crn
+ if test_crn:
+ prev, = struct.unpack('>H', test_crn)
+ summary("TEST MODE: Use specified crn %d" % prev)
+ crn = test_crn
+ test_crn = struct.pack('>H', prev + 0x10)
+ else:
+ crn = os.urandom(2)
+ hr = ndef.HandoverRequestRecord(version="1.4", crn=crn)
+ hr.add_alternative_carrier('active', carrier.name)
+ message = [hr, carrier]
+ summary("NFC Handover Request message for DPP: " + str(message))
+
+ if handover.peer_crn is not None and not alt:
+ summary("NFC handover request from peer was already received - do not send own")
+ return
+ if handover.client:
+ summary("Use already started handover client")
+ client = handover.client
+ else:
+ summary("Start handover client")
+ client = HandoverClient(handover, handover.llc)
+ try:
+ summary("Trying to initiate NFC connection handover")
+ client.connect()
+ summary("Connected for handover")
+ except nfc.llcp.ConnectRefused:
+ summary("Handover connection refused")
+ client.close()
+ return
+ except Exception as e:
+ summary("Other exception: " + str(e))
+ client.close()
+ return
+ handover.client = client
+
+ if handover.peer_crn is not None and not alt:
+ summary("NFC handover request from peer was already received - do not send own")
+ return
+
+ summary("Sending handover request")
+
+ handover.my_crn_ready = True
+
+ if not client.send_records(message):
+ handover.my_crn_ready = False
+ summary("Failed to send handover request", color=C_RED)
+ run_client_alt(handover, alt)
+ return
+
+ handover.my_crn, = struct.unpack('>H', crn)
+
+ summary("Receiving handover response")
+ try:
+ start = time.time()
+ message = client.recv_records(timeout=3.0)
+ end = time.time()
+ summary("Received {} record(s) in {} seconds".format(len(message) if message is not None else -1, end - start))
+ except Exception as e:
+ # This is fine if we are the handover selector
+ if handover.hs_sent:
+ summary("Client receive failed as expected since I'm the handover server: %s" % str(e))
+ elif handover.alt_proposal_used and not alt:
+ summary("Client received failed for initial proposal as expected since alternative proposal was also used: %s" % str(e))
+ else:
+ summary("Client receive failed: %s" % str(e), color=C_RED)
+ message = None
+ if message is None:
+ if handover.hs_sent:
+ summary("No response received as expected since I'm the handover server")
+ elif handover.alt_proposal_used and not alt:
+ summary("No response received for initial proposal as expected since alternative proposal was also used")
+ elif handover.try_own and not alt:
+ summary("No response received for initial proposal as expected since alternative proposal will also be sent")
+ else:
+ summary("No response received", color=C_RED)
+ run_client_alt(handover, alt)
+ return
+ summary("Received message: " + str(message))
+ if len(message) < 1 or \
+ not isinstance(message[0], ndef.HandoverSelectRecord):
+ summary("Response was not Hs - received: " + message.type)
+ return
+
+ summary("Received handover select message")
+ summary("alternative carriers: " + str(message[0].alternative_carriers))
+ if handover.i_m_selector:
+ summary("Ignore the received select since I'm the handover selector")
+ run_client_alt(handover, alt)
+ return
+
+ if handover.alt_proposal_used and not alt:
+ summary("Ignore received handover select for the initial proposal since alternative proposal was sent")
+ client.close()
+ return
+
+ dpp_found = False
+ for carrier in message:
+ if isinstance(carrier, ndef.HandoverSelectRecord):
+ continue
+ summary("Remote carrier type: " + carrier.type)
+ if carrier.type == "application/vnd.wfa.dpp":
+ if len(carrier.data) == 0 or carrier.data[0] != 0:
+ summary("URI Identifier Code 'None' not seen", color=C_RED)
+ continue
+ summary("DPP carrier type match - send to wpa_supplicant")
+ dpp_found = True
+ uri = carrier.data[1:].decode("utf-8")
+ summary("DPP URI: " + uri)
+ handover.peer_uri = uri
+ if test_uri:
+ summary("TEST MODE: Fake processing")
+ break
+ res = wpas_report_handover_sel(uri)
+ if res is None or "FAIL" in res:
+ summary("DPP handover report rejected", color=C_RED)
+ break
+
+ success_report("DPP handover reported successfully (initiator)")
+ summary("peer_id=" + res)
+ peer_id = int(res)
+ wpas = wpas_connect()
+ if wpas is None:
+ break
+
+ global enrollee_only
+ global config_params
+ if enrollee_only:
+ extra = " role=enrollee"
+ elif config_params:
+ extra = " role=configurator " + config_params
+ else:
+ # TODO: Single Configurator instance
+ res = wpas.request("DPP_CONFIGURATOR_ADD")
+ if "FAIL" in res:
+ summary("Failed to initiate Configurator", color=C_RED)
+ break
+ conf_id = int(res)
+ extra = " conf=sta-dpp configurator=%d" % conf_id
+ global own_id
+ summary("Initiate DPP authentication")
+ cmd = "DPP_AUTH_INIT peer=%d own=%d" % (peer_id, own_id)
+ cmd += extra
+ res = wpas.request(cmd)
+ if "FAIL" in res:
+ summary("Failed to initiate DPP authentication", color=C_RED)
+ break
+
+ if not dpp_found and handover.no_alt_proposal:
+ summary("DPP carrier not seen in response - do not allow alternative proposal anymore")
+ elif not dpp_found:
+ summary("DPP carrier not seen in response - allow peer to initiate a new handover with different parameters")
+ handover.alt_proposal = True
+ handover.my_crn_ready = False
+ handover.my_crn = None
+ handover.peer_crn = None
+ handover.hs_sent = False
+ summary("Returning from dpp_handover_client")
+ return
+
+ summary("Remove peer")
+ handover.close()
+ summary("Done with handover")
+ global only_one
+ if only_one:
+ print("only_one -> stop loop")
+ global continue_loop
+ continue_loop = False
+
+ global no_wait
+ if no_wait or only_one:
+ summary("Trying to exit..")
+ global terminate_now
+ terminate_now = True
+
+ summary("Returning from dpp_handover_client")
+
+class HandoverServer(nfc.handover.HandoverServer):
+ def __init__(self, handover, llc):
+ super(HandoverServer, self).__init__(llc)
+ self.sent_carrier = None
+ self.ho_server_processing = False
+ self.success = False
+ self.llc = llc
+ self.handover = handover
+
+ def serve(self, socket):
+ peer_sap = socket.getpeername()
+ summary("Serving handover client on remote sap {0}".format(peer_sap))
+ send_miu = socket.getsockopt(nfc.llcp.SO_SNDMIU)
+ try:
+ while socket.poll("recv"):
+ req = bytearray()
+ while socket.poll("recv"):
+ r = socket.recv()
+ if r is None:
+ return None
+ summary("Received %d octets" % len(r))
+ req += r
+ if len(req) == 0:
+ continue
+ try:
+ list(ndef.message_decoder(req, 'strict', {}))
+ except ndef.DecodeError:
+ continue
+ summary("Full message received")
+ resp = self._process_request_data(req)
+ if resp is None or len(resp) == 0:
+ summary("No handover select to send out - wait for a possible alternative handover request")
+ handover.alt_proposal = True
+ req = bytearray()
+ continue
+
+ for offset in range(0, len(resp), send_miu):
+ if not socket.send(resp[offset:offset + send_miu]):
+ summary("Failed to send handover select - connection closed")
+ return
+ summary("Sent out full handover select")
+ if handover.terminate_on_hs_send_completion:
+ handover.delayed_exit()
+
+ except nfc.llcp.Error as e:
+ global terminate_now
+ summary("HandoverServer exception: %s" % e,
+ color=None if e.errno == errno.EPIPE or terminate_now else C_RED)
+ finally:
+ socket.close()
+ summary("Handover serve thread exiting")
+
+ def process_handover_request_message(self, records):
+ handover = self.handover
+ self.ho_server_processing = True
+ global in_raw_mode
+ was_in_raw_mode = in_raw_mode
+ clear_raw_mode()
+ if was_in_raw_mode:
+ print("\n")
+ summary("HandoverServer - request received: " + str(records))
+
+ for carrier in records:
+ if not isinstance(carrier, ndef.HandoverRequestRecord):
+ continue
+ if carrier.collision_resolution_number:
+ handover.peer_crn = carrier.collision_resolution_number
+ summary("peer_crn: %d" % handover.peer_crn)
+
+ if handover.my_crn is None and handover.my_crn_ready:
+ summary("Still trying to send own handover request - wait a moment to see if that succeeds before checking crn values")
+ for i in range(10):
+ if handover.my_crn is not None:
+ break
+ time.sleep(0.01)
+ if handover.my_crn is not None:
+ summary("my_crn: %d" % handover.my_crn)
+
+ if handover.my_crn is not None and handover.peer_crn is not None:
+ if handover.my_crn == handover.peer_crn:
+ summary("Same crn used - automatic collision resolution failed")
+ # TODO: Should generate a new Handover Request message
+ return ''
+ if ((handover.my_crn & 1) == (handover.peer_crn & 1) and \
+ handover.my_crn > handover.peer_crn) or \
+ ((handover.my_crn & 1) != (handover.peer_crn & 1) and \
+ handover.my_crn < handover.peer_crn):
+ summary("I'm the Handover Selector Device")
+ handover.i_m_selector = True
+ else:
+ summary("Peer is the Handover Selector device")
+ summary("Ignore the received request.")
+ return ''
+
+ hs = ndef.HandoverSelectRecord('1.4')
+ sel = [hs]
+
+ found = False
+
+ for carrier in records:
+ if isinstance(carrier, ndef.HandoverRequestRecord):
+ continue
+ summary("Remote carrier type: " + carrier.type)
+ if carrier.type == "application/vnd.wfa.dpp":
+ summary("DPP carrier type match - add DPP carrier record")
+ if len(carrier.data) == 0 or carrier.data[0] != 0:
+ summary("URI Identifier Code 'None' not seen", color=C_RED)
+ continue
+ uri = carrier.data[1:].decode("utf-8")
+ summary("Received DPP URI: " + uri)
+
+ global test_uri, test_alt_uri
+ if test_uri:
+ summary("TEST MODE: Using specified URI")
+ data = test_sel_uri if test_sel_uri else test_uri
+ elif handover.alt_proposal and handover.altchanlist:
+ summary("Use alternative channel list while processing alternative proposal from peer")
+ data = wpas_get_nfc_uri(start_listen=False,
+ chan_override=handover.altchanlist,
+ pick_channel=True)
+ else:
+ data = wpas_get_nfc_uri(start_listen=False,
+ pick_channel=True)
+ summary("Own URI (pre-processing): %s" % data)
+
+ if test_uri:
+ summary("TEST MODE: Fake processing")
+ res = "OK"
+ data += " [%s]" % uri
+ else:
+ res = wpas_report_handover_req(uri)
+ if res is None or "FAIL" in res:
+ summary("DPP handover request processing failed",
+ color=C_RED)
+ if handover.altchanlist:
+ data = wpas_get_nfc_uri(start_listen=False,
+ chan_override=handover.altchanlist)
+ summary("Own URI (try another channel list): %s" % data)
+ continue
+
+ if test_alt_uri:
+ summary("TEST MODE: Reject initial proposal")
+ continue
+
+ found = True
+
+ if not test_uri:
+ wpas = wpas_connect()
+ if wpas is None:
+ continue
+ global own_id
+ data = wpas.request("DPP_BOOTSTRAP_GET_URI %d" % own_id).rstrip()
+ if "FAIL" in data:
+ continue
+ summary("Own URI (post-processing): %s" % data)
+ handover.my_uri = data
+ handover.peer_uri = uri
+ uri = ndef.UriRecord(data)
+ summary("Own bootstrapping NFC URI record: " + str(uri))
+
+ if not test_uri:
+ info = wpas.request("DPP_BOOTSTRAP_INFO %d" % own_id)
+ freq = None
+ for line in info.splitlines():
+ if line.startswith("use_freq="):
+ freq = int(line.split('=')[1])
+ if freq is None or freq == 0:
+ summary("No channel negotiated over NFC - use channel 6")
+ freq = 2437
+ else:
+ summary("Negotiated channel: %d MHz" % freq)
+ if not dpp_start_listen(wpas, freq):
+ break
+
+ carrier = ndef.Record('application/vnd.wfa.dpp', 'A', uri.data)
+ summary("Own DPP carrier record: " + str(carrier))
+ hs.add_alternative_carrier('active', carrier.name)
+ sel = [hs, carrier]
+ break
+
+ summary("Sending handover select: " + str(sel))
+ if found:
+ summary("Handover completed successfully")
+ handover.terminate_on_hs_send_completion = True
+ self.success = True
+ handover.hs_sent = True
+ handover.i_m_selector = True
+ elif handover.no_alt_proposal:
+ summary("Do not try alternative proposal anymore - handover failed",
+ color=C_RED)
+ handover.hs_sent = True
+ else:
+ summary("Try to initiate with alternative parameters")
+ handover.try_own = True
+ handover.hs_sent = False
+ handover.no_alt_proposal = True
+ if handover.client_thread:
+ handover.start_client_alt = True
+ else:
+ handover.client_thread = threading.Thread(target=llcp_worker,
+ args=(self.llc, True))
+ handover.client_thread.start()
+ return sel
+
+def clear_raw_mode():
+ import sys, tty, termios
+ global prev_tcgetattr, in_raw_mode
+ if not in_raw_mode:
+ return
+ fd = sys.stdin.fileno()
+ termios.tcsetattr(fd, termios.TCSADRAIN, prev_tcgetattr)
+ in_raw_mode = False
+
+def getch():
+ import sys, tty, termios, select
+ global prev_tcgetattr, in_raw_mode
+ fd = sys.stdin.fileno()
+ prev_tcgetattr = termios.tcgetattr(fd)
+ ch = None
+ try:
+ tty.setraw(fd)
+ in_raw_mode = True
+ [i, o, e] = select.select([fd], [], [], 0.05)
+ if i:
+ ch = sys.stdin.read(1)
+ finally:
+ termios.tcsetattr(fd, termios.TCSADRAIN, prev_tcgetattr)
+ in_raw_mode = False
+ return ch
+
+def dpp_tag_read(tag):
+ success = False
+ for record in tag.ndef.records:
+ summary(record)
+ summary("record type " + record.type)
+ if record.type == "application/vnd.wfa.dpp":
+ summary("DPP HS tag - send to wpa_supplicant")
+ success = dpp_hs_tag_read(record)
+ break
+ if isinstance(record, ndef.UriRecord):
+ summary("URI record: uri=" + record.uri)
+ summary("URI record: iri=" + record.iri)
+ if record.iri.startswith("DPP:"):
+ summary("DPP URI")
+ if not dpp_nfc_uri_process(record.iri):
+ break
+ success = True
+ else:
+ summary("Ignore unknown URI")
+ break
+
+ if success:
+ success_report("Tag read succeeded")
+
+ return success
+
+def rdwr_connected_write_tag(tag):
+ summary("Tag found - writing - " + str(tag))
+ if not tag.ndef:
+ summary("Not a formatted NDEF tag", color=C_RED)
+ return
+ if not tag.ndef.is_writeable:
+ summary("Not a writable tag", color=C_RED)
+ return
+ global dpp_tag_data
+ if tag.ndef.capacity < len(dpp_tag_data):
+ summary("Not enough room for the message")
+ return
+ try:
+ tag.ndef.records = dpp_tag_data
+ except ValueError as e:
+ summary("Writing the tag failed: %s" % str(e), color=C_RED)
+ return
+ success_report("Tag write succeeded")
+ summary("Tag writing completed - remove tag", color=C_GREEN)
+ global only_one, operation_success
+ operation_success = True
+ if only_one:
+ global continue_loop
+ continue_loop = False
+ global dpp_sel_wait_remove
+ return dpp_sel_wait_remove
+
+def write_nfc_uri(clf, wait_remove=True):
+ summary("Write NFC URI record")
+ data = wpas_get_nfc_uri()
+ if data is None:
+ summary("Could not get NFC URI from wpa_supplicant", color=C_RED)
+ return
+
+ global dpp_sel_wait_remove
+ dpp_sel_wait_remove = wait_remove
+ summary("URI: %s" % data)
+ uri = ndef.UriRecord(data)
+ summary(uri)
+
+ summary("Touch an NFC tag to write URI record", color=C_CYAN)
+ global dpp_tag_data
+ dpp_tag_data = [uri]
+ clf.connect(rdwr={'on-connect': rdwr_connected_write_tag})
+
+def write_nfc_hs(clf, wait_remove=True):
+ summary("Write NFC Handover Select record on a tag")
+ data = wpas_get_nfc_uri()
+ if data is None:
+ summary("Could not get NFC URI from wpa_supplicant", color=C_RED)
+ return
+
+ global dpp_sel_wait_remove
+ dpp_sel_wait_remove = wait_remove
+ summary("URI: %s" % data)
+ uri = ndef.UriRecord(data)
+ summary(uri)
+ carrier = ndef.Record('application/vnd.wfa.dpp', 'A', uri.data)
+ hs = ndef.HandoverSelectRecord('1.4')
+ hs.add_alternative_carrier('active', carrier.name)
+ summary(hs)
+ summary(carrier)
+
+ summary("Touch an NFC tag to write HS record", color=C_CYAN)
+ global dpp_tag_data
+ dpp_tag_data = [hs, carrier]
+ summary(dpp_tag_data)
+ clf.connect(rdwr={'on-connect': rdwr_connected_write_tag})
+
+def rdwr_connected(tag):
+ global only_one, no_wait
+ summary("Tag connected: " + str(tag))
+
+ if tag.ndef:
+ summary("NDEF tag: " + tag.type)
+ summary(tag.ndef.records)
+ success = dpp_tag_read(tag)
+ if only_one and success:
+ global continue_loop
+ continue_loop = False
+ else:
+ summary("Not an NDEF tag - remove tag", color=C_RED)
+ return True
+
+ return not no_wait
+
+def llcp_worker(llc, try_alt):
+ global handover
+ print("Start of llcp_worker()")
+ if try_alt:
+ summary("Starting handover client (try_alt)")
+ dpp_handover_client(handover, alt=True)
+ summary("Exiting llcp_worker thread (try_alt)")
+ return
+ global init_on_touch
+ if init_on_touch:
+ summary("Starting handover client (init_on_touch)")
+ dpp_handover_client(handover)
+ summary("Exiting llcp_worker thread (init_on_touch)")
+ return
+
+ global no_input
+ if no_input:
+ summary("Wait for handover to complete")
+ else:
+ print("Wait for handover to complete - press 'i' to initiate")
+ while not handover.wait_connection and handover.srv.sent_carrier is None:
+ if handover.try_own:
+ handover.try_own = False
+ summary("Try to initiate another handover with own parameters")
+ handover.my_crn_ready = False
+ handover.my_crn = None
+ handover.peer_crn = None
+ handover.hs_sent = False
+ dpp_handover_client(handover, alt=True)
+ summary("Exiting llcp_worker thread (retry with own parameters)")
+ return
+ if handover.srv.ho_server_processing:
+ time.sleep(0.025)
+ elif no_input:
+ time.sleep(0.5)
+ else:
+ res = getch()
+ if res != 'i':
+ continue
+ clear_raw_mode()
+ summary("Starting handover client")
+ dpp_handover_client(handover)
+ summary("Exiting llcp_worker thread (manual init)")
+ return
+
+ global in_raw_mode
+ was_in_raw_mode = in_raw_mode
+ clear_raw_mode()
+ if was_in_raw_mode:
+ print("\r")
+ summary("Exiting llcp_worker thread")
+
+class ConnectionHandover():
+ def __init__(self):
+ self.client = None
+ self.client_thread = None
+ self.reset()
+ self.exit_thread = None
+
+ def reset(self):
+ self.wait_connection = False
+ self.my_crn_ready = False
+ self.my_crn = None
+ self.peer_crn = None
+ self.hs_sent = False
+ self.no_alt_proposal = False
+ self.alt_proposal_used = False
+ self.i_m_selector = False
+ self.start_client_alt = False
+ self.terminate_on_hs_send_completion = False
+ self.try_own = False
+ self.my_uri = None
+ self.peer_uri = None
+ self.connected = False
+ self.alt_proposal = False
+
+ def start_handover_server(self, llc):
+ summary("Start handover server")
+ self.llc = llc
+ self.srv = HandoverServer(self, llc)
+
+ def close(self):
+ if self.client:
+ self.client.close()
+ self.client = None
+
+ def run_delayed_exit(self):
+ summary("Trying to exit (delayed)..")
+ time.sleep(0.25)
+ summary("Trying to exit (after wait)..")
+ global terminate_now
+ terminate_now = True
+
+ def delayed_exit(self):
+ global only_one
+ if only_one:
+ self.exit_thread = threading.Thread(target=self.run_delayed_exit)
+ self.exit_thread.start()
+
+def llcp_startup(llc):
+ global handover
+ handover.start_handover_server(llc)
+ return llc
+
+def llcp_connected(llc):
+ summary("P2P LLCP connected")
+ global handover
+ handover.connected = True
+ handover.srv.start()
+ if init_on_touch or not no_input:
+ handover.client_thread = threading.Thread(target=llcp_worker,
+ args=(llc, False))
+ handover.client_thread.start()
+ return True
+
+def llcp_release(llc):
+ summary("LLCP release")
+ global handover
+ handover.close()
+ return True
+
+def terminate_loop():
+ global terminate_now
+ return terminate_now
+
+def main():
+ clf = nfc.ContactlessFrontend()
+
+ parser = argparse.ArgumentParser(description='nfcpy to wpa_supplicant integration for DPP NFC operations')
+ parser.add_argument('-d', const=logging.DEBUG, default=logging.INFO,
+ action='store_const', dest='loglevel',
+ help='verbose debug output')
+ parser.add_argument('-q', const=logging.WARNING, action='store_const',
+ dest='loglevel', help='be quiet')
+ parser.add_argument('--only-one', '-1', action='store_true',
+ help='run only one operation and exit')
+ parser.add_argument('--init-on-touch', '-I', action='store_true',
+ help='initiate handover on touch')
+ parser.add_argument('--no-wait', action='store_true',
+ help='do not wait for tag to be removed before exiting')
+ parser.add_argument('--ifname', '-i',
+ help='network interface name')
+ parser.add_argument('--no-input', '-a', action='store_true',
+ help='do not use stdout input to initiate handover')
+ parser.add_argument('--tag-read-only', '-t', action='store_true',
+ help='tag read only (do not allow connection handover)')
+ parser.add_argument('--handover-only', action='store_true',
+ help='connection handover only (do not allow tag read)')
+ parser.add_argument('--enrollee', action='store_true',
+ help='run as Enrollee-only')
+ parser.add_argument('--configurator', action='store_true',
+ help='run as Configurator-only')
+ parser.add_argument('--config-params', default='',
+ help='configurator parameters')
+ parser.add_argument('--ctrl', default='/var/run/wpa_supplicant',
+ help='wpa_supplicant/hostapd control interface')
+ parser.add_argument('--summary',
+ help='summary file for writing status updates')
+ parser.add_argument('--success',
+ help='success file for writing success update')
+ parser.add_argument('--device', default='usb', help='NFC device to open')
+ parser.add_argument('--chan', default=None, help='channel list')
+ parser.add_argument('--altchan', default=None, help='alternative channel list')
+ parser.add_argument('--netrole', default=None, help='netrole for Enrollee')
+ parser.add_argument('--test-uri', default=None,
+ help='test mode: initial URI')
+ parser.add_argument('--test-alt-uri', default=None,
+ help='test mode: alternative URI')
+ parser.add_argument('--test-sel-uri', default=None,
+ help='test mode: handover select URI')
+ parser.add_argument('--test-crn', default=None,
+ help='test mode: hardcoded crn')
+ parser.add_argument('command', choices=['write-nfc-uri',
+ 'write-nfc-hs'],
+ nargs='?')
+ args = parser.parse_args()
+ summary(args)
+
+ global handover
+ handover = ConnectionHandover()
+
+ global only_one
+ only_one = args.only_one
+
+ global no_wait
+ no_wait = args.no_wait
+
+ global chanlist, netrole, test_uri, test_alt_uri, test_sel_uri
+ global test_crn
+ chanlist = args.chan
+ handover.altchanlist = args.altchan
+ netrole = args.netrole
+ test_uri = args.test_uri
+ test_alt_uri = args.test_alt_uri
+ test_sel_uri = args.test_sel_uri
+ if args.test_crn:
+ test_crn = struct.pack('>H', int(args.test_crn))
+ else:
+ test_crn = None
+
+ logging.basicConfig(level=args.loglevel)
+ for l in ['nfc.clf.rcs380',
+ 'nfc.clf.transport',
+ 'nfc.clf.device',
+ 'nfc.clf.__init__',
+ 'nfc.llcp',
+ 'nfc.handover']:
+ log = logging.getLogger(l)
+ log.setLevel(args.loglevel)
+
+ global init_on_touch
+ init_on_touch = args.init_on_touch
+
+ global enrollee_only
+ enrollee_only = args.enrollee
+
+ global configurator_only
+ configurator_only = args.configurator
+
+ global config_params
+ config_params = args.config_params
+
+ if args.ifname:
+ global ifname
+ ifname = args.ifname
+ summary("Selected ifname " + ifname)
+
+ if args.ctrl:
+ global wpas_ctrl
+ wpas_ctrl = args.ctrl
+
+ if args.summary:
+ global summary_file
+ summary_file = args.summary
+
+ if args.success:
+ global success_file
+ success_file = args.success
+
+ if args.no_input:
+ global no_input
+ no_input = True
+
+ clf = nfc.ContactlessFrontend()
+
+ try:
+ if not clf.open(args.device):
+ summary("Could not open connection with an NFC device", color=C_RED)
+ raise SystemExit(1)
+
+ if args.command == "write-nfc-uri":
+ write_nfc_uri(clf, wait_remove=not args.no_wait)
+ if not operation_success:
+ raise SystemExit(1)
+ raise SystemExit
+
+ if args.command == "write-nfc-hs":
+ write_nfc_hs(clf, wait_remove=not args.no_wait)
+ if not operation_success:
+ raise SystemExit(1)
+ raise SystemExit
+
+ global continue_loop
+ while continue_loop:
+ global in_raw_mode
+ was_in_raw_mode = in_raw_mode
+ clear_raw_mode()
+ if was_in_raw_mode:
+ print("\r")
+ if args.handover_only:
+ summary("Waiting a peer to be touched", color=C_MAGENTA)
+ elif args.tag_read_only:
+ summary("Waiting for a tag to be touched", color=C_BLUE)
+ else:
+ summary("Waiting for a tag or peer to be touched",
+ color=C_GREEN)
+ handover.wait_connection = True
+ try:
+ if args.tag_read_only:
+ if not clf.connect(rdwr={'on-connect': rdwr_connected}):
+ break
+ elif args.handover_only:
+ if not clf.connect(llcp={'on-startup': llcp_startup,
+ 'on-connect': llcp_connected,
+ 'on-release': llcp_release},
+ terminate=terminate_loop):
+ break
+ else:
+ if not clf.connect(rdwr={'on-connect': rdwr_connected},
+ llcp={'on-startup': llcp_startup,
+ 'on-connect': llcp_connected,
+ 'on-release': llcp_release},
+ terminate=terminate_loop):
+ break
+ except Exception as e:
+ summary("clf.connect failed: " + str(e))
+ break
+
+ if only_one and handover.connected:
+ role = "selector" if handover.i_m_selector else "requestor"
+ summary("Connection handover result: I'm the %s" % role,
+ color=C_YELLOW)
+ if handover.peer_uri:
+ summary("Peer URI: " + handover.peer_uri, color=C_YELLOW)
+ if handover.my_uri:
+ summary("My URI: " + handover.my_uri, color=C_YELLOW)
+ if not (handover.peer_uri and handover.my_uri):
+ summary("Negotiated connection handover failed",
+ color=C_YELLOW)
+ break
+
+ except KeyboardInterrupt:
+ raise SystemExit
+ finally:
+ clf.close()
+
+ raise SystemExit
+
+if __name__ == '__main__':
+ main()
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/dpp-qrcode.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/dpp-qrcode.py
new file mode 100755
index 0000000..b468d15
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/dpp-qrcode.py
@@ -0,0 +1,130 @@
+#!/usr/bin/python
+#
+# Example Android logcat to wpa_supplicant wrapper for QR Code scans
+# Copyright (c) 2017, Qualcomm Atheros, Inc.
+#
+# This software may be distributed under the terms of the BSD license.
+# See README for more details.
+
+import os
+import sys
+import argparse
+import logging
+import qrcode
+
+scriptsdir = os.path.dirname(os.path.realpath(sys.modules[__name__].__file__))
+sys.path.append(os.path.join(scriptsdir, '..', '..', 'wpaspy'))
+
+import wpaspy
+
+wpas_ctrl = '/var/run/wpa_supplicant'
+
+def wpas_connect():
+ ifaces = []
+ if os.path.isdir(wpas_ctrl):
+ try:
+ ifaces = [os.path.join(wpas_ctrl, i) for i in os.listdir(wpas_ctrl)]
+ except OSError as error:
+ print("Could not find wpa_supplicant: ", error)
+ return None
+
+ if len(ifaces) < 1:
+ print("No wpa_supplicant control interface found")
+ return None
+
+ for ctrl in ifaces:
+ try:
+ wpas = wpaspy.Ctrl(ctrl)
+ return wpas
+ except Exception as e:
+ pass
+ return None
+
+def dpp_logcat():
+ for line in iter(sys.stdin.readline, ''):
+ if "ResultHandler: Launching intent: Intent" not in line:
+ continue
+ if "act=android.intent.action.VIEW" not in line:
+ continue
+ uri = None
+ for val in line.split(' '):
+ if val.startswith('dat='):
+ uri = val.split('=', 1)[1]
+ break
+ if not uri:
+ continue
+ if not uri.startswith('DPP:'):
+ continue
+ print("Found DPP bootstrap info URI:")
+ print(uri)
+ wpas = wpas_connect()
+ if not wpas:
+ print("Could not connect to wpa_supplicant")
+ print('')
+ continue
+ res = wpas.request("DPP_QR_CODE " + uri);
+ try:
+ id = int(res)
+ except ValueError:
+ print("QR Code URI rejected")
+ continue
+ print("QR Code URI accepted - ID=%d" % id)
+ print(wpas.request("DPP_BOOTSTRAP_INFO %d" % id))
+ del wpas
+
+def dpp_display(curve):
+ wpas = wpas_connect()
+ if not wpas:
+ print("Could not connect to wpa_supplicant")
+ return
+ res = wpas.request("STATUS")
+ addr = None
+ for line in res.splitlines():
+ if line.startswith("address="):
+ addr = line.split('=')[1]
+ break
+ cmd = "DPP_BOOTSTRAP_GEN type=qrcode"
+ cmd += " chan=81/1"
+ if addr:
+ cmd += " mac=" + addr.replace(':','')
+ if curve:
+ cmd += " curve=" + curve
+ res = wpas.request(cmd)
+ try:
+ id = int(res)
+ except ValueError:
+ print("Failed to generate bootstrap info URI")
+ return
+ print("Bootstrap information - ID=%d" % id)
+ print(wpas.request("DPP_BOOTSTRAP_INFO %d" % id))
+ uri = wpas.request("DPP_BOOTSTRAP_GET_URI %d" % id)
+ print(uri)
+ print("ID=%d" % id)
+ qr = qrcode.QRCode(error_correction=qrcode.constants.ERROR_CORRECT_M,
+ border=3)
+ qr.add_data(uri, optimize=5)
+ qr.print_ascii(tty=True)
+ print("ID=%d" % id)
+ del wpas
+
+def main():
+ parser = argparse.ArgumentParser(description='Android logcat to wpa_supplicant integration for DPP QR Code operations')
+ parser.add_argument('-d', const=logging.DEBUG, default=logging.INFO,
+ action='store_const', dest='loglevel',
+ help='verbose debug output')
+ parser.add_argument('--curve', '-c',
+ help='set a specific curve (P-256, P-384, P-521, BP-256R1, BP-384R1, BP-512R1) for key generation')
+ parser.add_argument('command', choices=['logcat',
+ 'display'],
+ nargs='?')
+ args = parser.parse_args()
+
+ logging.basicConfig(level=args.loglevel)
+
+ if args.command == "logcat":
+ dpp_logcat()
+ elif args.command == "display":
+ dpp_display(args.curve)
+
+if __name__ == '__main__':
+ main()
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/ieee8021x.conf b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/ieee8021x.conf
new file mode 100755
index 0000000..e8a5503
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/ieee8021x.conf
@@ -0,0 +1,13 @@
+# IEEE 802.1X with dynamic WEP keys using EAP-PEAP/MSCHAPv2
+
+ctrl_interface=/var/run/wpa_supplicant
+
+network={
+ ssid="example 802.1x network"
+ key_mgmt=IEEE8021X
+ eap=PEAP
+ phase2="auth=MSCHAPV2"
+ identity="user name"
+ password="password"
+ ca_cert="/etc/cert/ca.pem"
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/openCryptoki.conf b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/openCryptoki.conf
new file mode 100755
index 0000000..e2301a6
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/openCryptoki.conf
@@ -0,0 +1,41 @@
+# EAP-TLS using private key and certificates via OpenSSL PKCS#11 engine and
+# openCryptoki (e.g., with TPM token)
+
+# This example uses following PKCS#11 objects:
+# $ pkcs11-tool --module /usr/lib/opencryptoki/libopencryptoki.so -O -l
+# Please enter User PIN:
+# Private Key Object; RSA
+# label: rsakey
+# ID: 04
+# Usage: decrypt, sign, unwrap
+# Certificate Object, type = X.509 cert
+# label: ca
+# ID: 01
+# Certificate Object, type = X.509 cert
+# label: cert
+# ID: 04
+
+# Configure OpenSSL to load the PKCS#11 engine and openCryptoki module
+pkcs11_engine_path=/usr/lib/engines/engine_pkcs11.so
+pkcs11_module_path=/usr/lib/opencryptoki/libopencryptoki.so
+
+network={
+ ssid="test network"
+ key_mgmt=WPA-EAP
+ eap=TLS
+ identity="User"
+
+ # use OpenSSL PKCS#11 engine for this network
+ engine=1
+ engine_id="pkcs11"
+
+ # select the private key and certificates based on ID (see pkcs11-tool
+ # output above)
+ key_id="4"
+ cert_id="4"
+ ca_cert_id="1"
+
+ # set the PIN code; leave this out to configure the PIN to be requested
+ # interactively when needed (e.g., via wpa_gui or wpa_cli)
+ pin="123456"
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p-action-udhcp.sh b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p-action-udhcp.sh
new file mode 100755
index 0000000..53d8b77
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p-action-udhcp.sh
@@ -0,0 +1,69 @@
+#!/bin/sh
+
+IFNAME=$1
+CMD=$2
+
+kill_daemon() {
+ NAME=$1
+ PF=$2
+
+ if [ ! -r $PF ]; then
+ return
+ fi
+
+ PID=`cat $PF`
+ if [ $PID -gt 0 ]; then
+ if ps $PID | grep -q $NAME; then
+ kill $PID
+ fi
+ fi
+ rm $PF
+}
+
+if [ "$CMD" = "P2P-GROUP-STARTED" ]; then
+ GIFNAME=$3
+ if [ "$4" = "GO" ]; then
+ kill_daemon udhcpc /var/run/udhcpc-$GIFNAME.pid
+ ifconfig $GIFNAME 192.168.42.1 up
+ udhcpd /etc/udhcpd-p2p.conf
+ fi
+ if [ "$4" = "client" ]; then
+ kill_daemon udhcpc /var/run/udhcpc-$GIFNAME.pid
+ kill_daemon udhcpd /var/run/udhcpd-$GIFNAME.pid
+ udhcpc -i $GIFNAME -p /var/run/udhcpc-$GIFNAME.pid \
+ -s /etc/udhcpc.script
+ fi
+fi
+
+if [ "$CMD" = "P2P-GROUP-REMOVED" ]; then
+ GIFNAME=$3
+ if [ "$4" = "GO" ]; then
+ kill_daemon udhcpd /var/run/udhcpd-$GIFNAME.pid
+ ifconfig $GIFNAME 0.0.0.0
+ fi
+ if [ "$4" = "client" ]; then
+ kill_daemon udhcpc /var/run/udhcpc-$GIFNAME.pid
+ ifconfig $GIFNAME 0.0.0.0
+ fi
+fi
+
+if [ "$CMD" = "P2P-CROSS-CONNECT-ENABLE" ]; then
+ GIFNAME=$3
+ UPLINK=$4
+ # enable NAT/masquerade $GIFNAME -> $UPLINK
+ iptables -P FORWARD DROP
+ iptables -t nat -A POSTROUTING -o $UPLINK -j MASQUERADE
+ iptables -A FORWARD -i $UPLINK -o $GIFNAME -m state --state RELATED,ESTABLISHED -j ACCEPT
+ iptables -A FORWARD -i $GIFNAME -o $UPLINK -j ACCEPT
+ sysctl net.ipv4.ip_forward=1
+fi
+
+if [ "$CMD" = "P2P-CROSS-CONNECT-DISABLE" ]; then
+ GIFNAME=$3
+ UPLINK=$4
+ # disable NAT/masquerade $GIFNAME -> $UPLINK
+ sysctl net.ipv4.ip_forward=0
+ iptables -t nat -D POSTROUTING -o $UPLINK -j MASQUERADE
+ iptables -D FORWARD -i $UPLINK -o $GIFNAME -m state --state RELATED,ESTABLISHED -j ACCEPT
+ iptables -D FORWARD -i $GIFNAME -o $UPLINK -j ACCEPT
+fi
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p-action.sh b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p-action.sh
new file mode 100755
index 0000000..6c27b27
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p-action.sh
@@ -0,0 +1,96 @@
+#!/bin/sh
+
+IFNAME=$1
+CMD=$2
+
+kill_daemon() {
+ NAME=$1
+ PF=$2
+
+ if [ ! -r $PF ]; then
+ return
+ fi
+
+ PID=`cat $PF`
+ if [ $PID -gt 0 ]; then
+ if ps $PID | grep -q $NAME; then
+ kill $PID
+ fi
+ fi
+ rm $PF
+}
+
+if [ "$CMD" = "P2P-GROUP-STARTED" ]; then
+ GIFNAME=$3
+ if [ "$4" = "GO" ]; then
+ kill_daemon dhclient /var/run/dhclient-$GIFNAME.pid
+ rm /var/run/dhclient.leases-$GIFNAME
+ kill_daemon dnsmasq /var/run/dnsmasq.pid-$GIFNAME
+ ifconfig $GIFNAME 192.168.42.1 up
+ if ! dnsmasq -x /var/run/dnsmasq.pid-$GIFNAME \
+ -i $GIFNAME \
+ -F192.168.42.11,192.168.42.99; then
+ # another dnsmasq instance may be running and blocking us; try to
+ # start with -z to avoid that
+ dnsmasq -x /var/run/dnsmasq.pid-$GIFNAME \
+ -i $GIFNAME \
+ -F192.168.42.11,192.168.42.99 --listen-address 192.168.42.1 -z -p 0
+ fi
+ fi
+ if [ "$4" = "client" ]; then
+ kill_daemon dhclient /var/run/dhclient-$GIFNAME.pid
+ rm /var/run/dhclient.leases-$GIFNAME
+ kill_daemon dnsmasq /var/run/dnsmasq.pid-$GIFNAME
+ ipaddr=`echo "$*" | sed 's/.* ip_addr=\([^ ]*\).*/\1/'`
+ ipmask=`echo "$*" | sed 's/.* ip_mask=\([^ ]*\).*/\1/'`
+ goipaddr=`echo "$*" | sed 's/.* go_ip_addr=\([^ ]*\).*/\1/'`
+ if echo "$ipaddr$ipmask$goipaddr" | grep -q ' '; then
+ ipaddr=""
+ ipmask=""
+ goipaddr=""
+ fi
+ if [ -n "$ipaddr" ]; then
+ sudo ifconfig $GIFNAME "$ipaddr" netmask "$ipmask"
+ sudo ip ro re default via "$goipaddr"
+ exit 0
+ fi
+ dhclient -pf /var/run/dhclient-$GIFNAME.pid \
+ -lf /var/run/dhclient.leases-$GIFNAME \
+ -nw \
+ $GIFNAME
+ fi
+fi
+
+if [ "$CMD" = "P2P-GROUP-REMOVED" ]; then
+ GIFNAME=$3
+ if [ "$4" = "GO" ]; then
+ kill_daemon dnsmasq /var/run/dnsmasq.pid-$GIFNAME
+ ifconfig $GIFNAME 0.0.0.0
+ fi
+ if [ "$4" = "client" ]; then
+ kill_daemon dhclient /var/run/dhclient-$GIFNAME.pid
+ rm /var/run/dhclient.leases-$GIFNAME
+ ifconfig $GIFNAME 0.0.0.0
+ fi
+fi
+
+if [ "$CMD" = "P2P-CROSS-CONNECT-ENABLE" ]; then
+ GIFNAME=$3
+ UPLINK=$4
+ # enable NAT/masquerade $GIFNAME -> $UPLINK
+ iptables -P FORWARD DROP
+ iptables -t nat -A POSTROUTING -o $UPLINK -j MASQUERADE
+ iptables -A FORWARD -i $UPLINK -o $GIFNAME -m state --state RELATED,ESTABLISHED -j ACCEPT
+ iptables -A FORWARD -i $GIFNAME -o $UPLINK -j ACCEPT
+ sysctl net.ipv4.ip_forward=1
+fi
+
+if [ "$CMD" = "P2P-CROSS-CONNECT-DISABLE" ]; then
+ GIFNAME=$3
+ UPLINK=$4
+ # disable NAT/masquerade $GIFNAME -> $UPLINK
+ sysctl net.ipv4.ip_forward=0
+ iptables -t nat -D POSTROUTING -o $UPLINK -j MASQUERADE
+ iptables -D FORWARD -i $UPLINK -o $GIFNAME -m state --state RELATED,ESTABLISHED -j ACCEPT
+ iptables -D FORWARD -i $GIFNAME -o $UPLINK -j ACCEPT
+fi
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p-nfc.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p-nfc.py
new file mode 100755
index 0000000..889ac8b
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p-nfc.py
@@ -0,0 +1,654 @@
+#!/usr/bin/python
+#
+# Example nfcpy to wpa_supplicant wrapper for P2P NFC operations
+# Copyright (c) 2012-2013, Jouni Malinen <j@w1.fi>
+#
+# This software may be distributed under the terms of the BSD license.
+# See README for more details.
+
+import os
+import sys
+import time
+import random
+import threading
+import argparse
+
+import nfc
+import nfc.ndef
+import nfc.llcp
+import nfc.handover
+
+import logging
+
+import wpaspy
+
+wpas_ctrl = '/var/run/wpa_supplicant'
+ifname = None
+init_on_touch = False
+in_raw_mode = False
+prev_tcgetattr = 0
+include_wps_req = True
+include_p2p_req = True
+no_input = False
+srv = None
+continue_loop = True
+terminate_now = False
+summary_file = None
+success_file = None
+
+def summary(txt):
+ print(txt)
+ if summary_file:
+ with open(summary_file, 'a') as f:
+ f.write(txt + "\n")
+
+def success_report(txt):
+ summary(txt)
+ if success_file:
+ with open(success_file, 'a') as f:
+ f.write(txt + "\n")
+
+def wpas_connect():
+ ifaces = []
+ if os.path.isdir(wpas_ctrl):
+ try:
+ ifaces = [os.path.join(wpas_ctrl, i) for i in os.listdir(wpas_ctrl)]
+ except OSError as error:
+ print("Could not find wpa_supplicant: ", error)
+ return None
+
+ if len(ifaces) < 1:
+ print("No wpa_supplicant control interface found")
+ return None
+
+ for ctrl in ifaces:
+ if ifname:
+ if ifname not in ctrl:
+ continue
+ try:
+ print("Trying to use control interface " + ctrl)
+ wpas = wpaspy.Ctrl(ctrl)
+ return wpas
+ except Exception as e:
+ pass
+ return None
+
+
+def wpas_tag_read(message):
+ wpas = wpas_connect()
+ if (wpas == None):
+ return False
+ cmd = "WPS_NFC_TAG_READ " + str(message).encode("hex")
+ global force_freq
+ if force_freq:
+ cmd = cmd + " freq=" + force_freq
+ if "FAIL" in wpas.request(cmd):
+ return False
+ return True
+
+
+def wpas_get_handover_req():
+ wpas = wpas_connect()
+ if (wpas == None):
+ return None
+ res = wpas.request("NFC_GET_HANDOVER_REQ NDEF P2P-CR").rstrip()
+ if "FAIL" in res:
+ return None
+ return res.decode("hex")
+
+def wpas_get_handover_req_wps():
+ wpas = wpas_connect()
+ if (wpas == None):
+ return None
+ res = wpas.request("NFC_GET_HANDOVER_REQ NDEF WPS-CR").rstrip()
+ if "FAIL" in res:
+ return None
+ return res.decode("hex")
+
+
+def wpas_get_handover_sel(tag=False):
+ wpas = wpas_connect()
+ if (wpas == None):
+ return None
+ if tag:
+ res = wpas.request("NFC_GET_HANDOVER_SEL NDEF P2P-CR-TAG").rstrip()
+ else:
+ res = wpas.request("NFC_GET_HANDOVER_SEL NDEF P2P-CR").rstrip()
+ if "FAIL" in res:
+ return None
+ return res.decode("hex")
+
+
+def wpas_get_handover_sel_wps():
+ wpas = wpas_connect()
+ if (wpas == None):
+ return None
+ res = wpas.request("NFC_GET_HANDOVER_SEL NDEF WPS-CR");
+ if "FAIL" in res:
+ return None
+ return res.rstrip().decode("hex")
+
+
+def wpas_report_handover(req, sel, type):
+ wpas = wpas_connect()
+ if (wpas == None):
+ return None
+ cmd = "NFC_REPORT_HANDOVER " + type + " P2P " + str(req).encode("hex") + " " + str(sel).encode("hex")
+ global force_freq
+ if force_freq:
+ cmd = cmd + " freq=" + force_freq
+ return wpas.request(cmd)
+
+
+def wpas_report_handover_wsc(req, sel, type):
+ wpas = wpas_connect()
+ if (wpas == None):
+ return None
+ cmd = "NFC_REPORT_HANDOVER " + type + " WPS " + str(req).encode("hex") + " " + str(sel).encode("hex")
+ if force_freq:
+ cmd = cmd + " freq=" + force_freq
+ return wpas.request(cmd)
+
+
+def p2p_handover_client(llc):
+ message = nfc.ndef.HandoverRequestMessage(version="1.2")
+ message.nonce = random.randint(0, 0xffff)
+
+ global include_p2p_req
+ if include_p2p_req:
+ data = wpas_get_handover_req()
+ if (data == None):
+ summary("Could not get handover request carrier record from wpa_supplicant")
+ return
+ print("Handover request carrier record from wpa_supplicant: " + data.encode("hex"))
+ datamsg = nfc.ndef.Message(data)
+ message.add_carrier(datamsg[0], "active", datamsg[1:])
+
+ global include_wps_req
+ if include_wps_req:
+ print("Handover request (pre-WPS):")
+ try:
+ print(message.pretty())
+ except Exception as e:
+ print(e)
+
+ data = wpas_get_handover_req_wps()
+ if data:
+ print("Add WPS request in addition to P2P")
+ datamsg = nfc.ndef.Message(data)
+ message.add_carrier(datamsg[0], "active", datamsg[1:])
+
+ print("Handover request:")
+ try:
+ print(message.pretty())
+ except Exception as e:
+ print(e)
+ print(str(message).encode("hex"))
+
+ client = nfc.handover.HandoverClient(llc)
+ try:
+ summary("Trying to initiate NFC connection handover")
+ client.connect()
+ summary("Connected for handover")
+ except nfc.llcp.ConnectRefused:
+ summary("Handover connection refused")
+ client.close()
+ return
+ except Exception as e:
+ summary("Other exception: " + str(e))
+ client.close()
+ return
+
+ summary("Sending handover request")
+
+ if not client.send(message):
+ summary("Failed to send handover request")
+ client.close()
+ return
+
+ summary("Receiving handover response")
+ message = client._recv()
+ if message is None:
+ summary("No response received")
+ client.close()
+ return
+ if message.type != "urn:nfc:wkt:Hs":
+ summary("Response was not Hs - received: " + message.type)
+ client.close()
+ return
+
+ print("Received message")
+ try:
+ print(message.pretty())
+ except Exception as e:
+ print(e)
+ print(str(message).encode("hex"))
+ message = nfc.ndef.HandoverSelectMessage(message)
+ summary("Handover select received")
+ try:
+ print(message.pretty())
+ except Exception as e:
+ print(e)
+
+ for carrier in message.carriers:
+ print("Remote carrier type: " + carrier.type)
+ if carrier.type == "application/vnd.wfa.p2p":
+ print("P2P carrier type match - send to wpa_supplicant")
+ if "OK" in wpas_report_handover(data, carrier.record, "INIT"):
+ success_report("P2P handover reported successfully (initiator)")
+ else:
+ summary("P2P handover report rejected")
+ break
+
+ print("Remove peer")
+ client.close()
+ print("Done with handover")
+ global only_one
+ if only_one:
+ print("only_one -> stop loop")
+ global continue_loop
+ continue_loop = False
+
+ global no_wait
+ if no_wait:
+ print("Trying to exit..")
+ global terminate_now
+ terminate_now = True
+
+
+class HandoverServer(nfc.handover.HandoverServer):
+ def __init__(self, llc):
+ super(HandoverServer, self).__init__(llc)
+ self.sent_carrier = None
+ self.ho_server_processing = False
+ self.success = False
+
+ # override to avoid parser error in request/response.pretty() in nfcpy
+ # due to new WSC handover format
+ def _process_request(self, request):
+ summary("received handover request {}".format(request.type))
+ response = nfc.ndef.Message("\xd1\x02\x01Hs\x12")
+ if not request.type == 'urn:nfc:wkt:Hr':
+ summary("not a handover request")
+ else:
+ try:
+ request = nfc.ndef.HandoverRequestMessage(request)
+ except nfc.ndef.DecodeError as e:
+ summary("error decoding 'Hr' message: {}".format(e))
+ else:
+ response = self.process_request(request)
+ summary("send handover response {}".format(response.type))
+ return response
+
+ def process_request(self, request):
+ self.ho_server_processing = True
+ clear_raw_mode()
+ print("HandoverServer - request received")
+ try:
+ print("Parsed handover request: " + request.pretty())
+ except Exception as e:
+ print(e)
+
+ sel = nfc.ndef.HandoverSelectMessage(version="1.2")
+
+ found = False
+
+ for carrier in request.carriers:
+ print("Remote carrier type: " + carrier.type)
+ if carrier.type == "application/vnd.wfa.p2p":
+ print("P2P carrier type match - add P2P carrier record")
+ found = True
+ self.received_carrier = carrier.record
+ print("Carrier record:")
+ try:
+ print(carrier.record.pretty())
+ except Exception as e:
+ print(e)
+ data = wpas_get_handover_sel()
+ if data is None:
+ print("Could not get handover select carrier record from wpa_supplicant")
+ continue
+ print("Handover select carrier record from wpa_supplicant:")
+ print(data.encode("hex"))
+ self.sent_carrier = data
+ if "OK" in wpas_report_handover(self.received_carrier, self.sent_carrier, "RESP"):
+ success_report("P2P handover reported successfully (responder)")
+ else:
+ summary("P2P handover report rejected")
+ break
+
+ message = nfc.ndef.Message(data);
+ sel.add_carrier(message[0], "active", message[1:])
+ break
+
+ for carrier in request.carriers:
+ if found:
+ break
+ print("Remote carrier type: " + carrier.type)
+ if carrier.type == "application/vnd.wfa.wsc":
+ print("WSC carrier type match - add WSC carrier record")
+ found = True
+ self.received_carrier = carrier.record
+ print("Carrier record:")
+ try:
+ print(carrier.record.pretty())
+ except Exception as e:
+ print(e)
+ data = wpas_get_handover_sel_wps()
+ if data is None:
+ print("Could not get handover select carrier record from wpa_supplicant")
+ continue
+ print("Handover select carrier record from wpa_supplicant:")
+ print(data.encode("hex"))
+ self.sent_carrier = data
+ if "OK" in wpas_report_handover_wsc(self.received_carrier, self.sent_carrier, "RESP"):
+ success_report("WSC handover reported successfully")
+ else:
+ summary("WSC handover report rejected")
+ break
+
+ message = nfc.ndef.Message(data);
+ sel.add_carrier(message[0], "active", message[1:])
+ found = True
+ break
+
+ print("Handover select:")
+ try:
+ print(sel.pretty())
+ except Exception as e:
+ print(e)
+ print(str(sel).encode("hex"))
+
+ summary("Sending handover select")
+ self.success = True
+ return sel
+
+
+def clear_raw_mode():
+ import sys, tty, termios
+ global prev_tcgetattr, in_raw_mode
+ if not in_raw_mode:
+ return
+ fd = sys.stdin.fileno()
+ termios.tcsetattr(fd, termios.TCSADRAIN, prev_tcgetattr)
+ in_raw_mode = False
+
+
+def getch():
+ import sys, tty, termios, select
+ global prev_tcgetattr, in_raw_mode
+ fd = sys.stdin.fileno()
+ prev_tcgetattr = termios.tcgetattr(fd)
+ ch = None
+ try:
+ tty.setraw(fd)
+ in_raw_mode = True
+ [i, o, e] = select.select([fd], [], [], 0.05)
+ if i:
+ ch = sys.stdin.read(1)
+ finally:
+ termios.tcsetattr(fd, termios.TCSADRAIN, prev_tcgetattr)
+ in_raw_mode = False
+ return ch
+
+
+def p2p_tag_read(tag):
+ success = False
+ if len(tag.ndef.message):
+ for record in tag.ndef.message:
+ print("record type " + record.type)
+ if record.type == "application/vnd.wfa.wsc":
+ summary("WPS tag - send to wpa_supplicant")
+ success = wpas_tag_read(tag.ndef.message)
+ break
+ if record.type == "application/vnd.wfa.p2p":
+ summary("P2P tag - send to wpa_supplicant")
+ success = wpas_tag_read(tag.ndef.message)
+ break
+ else:
+ summary("Empty tag")
+
+ if success:
+ success_report("Tag read succeeded")
+
+ return success
+
+
+def rdwr_connected_p2p_write(tag):
+ summary("Tag found - writing - " + str(tag))
+ global p2p_sel_data
+ tag.ndef.message = str(p2p_sel_data)
+ success_report("Tag write succeeded")
+ print("Done - remove tag")
+ global only_one
+ if only_one:
+ global continue_loop
+ continue_loop = False
+ global p2p_sel_wait_remove
+ return p2p_sel_wait_remove
+
+def wps_write_p2p_handover_sel(clf, wait_remove=True):
+ print("Write P2P handover select")
+ data = wpas_get_handover_sel(tag=True)
+ if (data == None):
+ summary("Could not get P2P handover select from wpa_supplicant")
+ return
+
+ global p2p_sel_wait_remove
+ p2p_sel_wait_remove = wait_remove
+ global p2p_sel_data
+ p2p_sel_data = nfc.ndef.HandoverSelectMessage(version="1.2")
+ message = nfc.ndef.Message(data);
+ p2p_sel_data.add_carrier(message[0], "active", message[1:])
+ print("Handover select:")
+ try:
+ print(p2p_sel_data.pretty())
+ except Exception as e:
+ print(e)
+ print(str(p2p_sel_data).encode("hex"))
+
+ print("Touch an NFC tag")
+ clf.connect(rdwr={'on-connect': rdwr_connected_p2p_write})
+
+
+def rdwr_connected(tag):
+ global only_one, no_wait
+ summary("Tag connected: " + str(tag))
+
+ if tag.ndef:
+ print("NDEF tag: " + tag.type)
+ try:
+ print(tag.ndef.message.pretty())
+ except Exception as e:
+ print(e)
+ success = p2p_tag_read(tag)
+ if only_one and success:
+ global continue_loop
+ continue_loop = False
+ else:
+ summary("Not an NDEF tag - remove tag")
+ return True
+
+ return not no_wait
+
+
+def llcp_worker(llc):
+ global init_on_touch
+ if init_on_touch:
+ print("Starting handover client")
+ p2p_handover_client(llc)
+ return
+
+ global no_input
+ if no_input:
+ print("Wait for handover to complete")
+ else:
+ print("Wait for handover to complete - press 'i' to initiate ('w' for WPS only, 'p' for P2P only)")
+ global srv
+ global wait_connection
+ while not wait_connection and srv.sent_carrier is None:
+ if srv.ho_server_processing:
+ time.sleep(0.025)
+ elif no_input:
+ time.sleep(0.5)
+ else:
+ global include_wps_req, include_p2p_req
+ res = getch()
+ if res == 'i':
+ include_wps_req = True
+ include_p2p_req = True
+ elif res == 'p':
+ include_wps_req = False
+ include_p2p_req = True
+ elif res == 'w':
+ include_wps_req = True
+ include_p2p_req = False
+ else:
+ continue
+ clear_raw_mode()
+ print("Starting handover client")
+ p2p_handover_client(llc)
+ return
+
+ clear_raw_mode()
+ print("Exiting llcp_worker thread")
+
+def llcp_startup(clf, llc):
+ print("Start LLCP server")
+ global srv
+ srv = HandoverServer(llc)
+ return llc
+
+def llcp_connected(llc):
+ print("P2P LLCP connected")
+ global wait_connection
+ wait_connection = False
+ global init_on_touch
+ if not init_on_touch:
+ global srv
+ srv.start()
+ if init_on_touch or not no_input:
+ threading.Thread(target=llcp_worker, args=(llc,)).start()
+ return True
+
+def terminate_loop():
+ global terminate_now
+ return terminate_now
+
+def main():
+ clf = nfc.ContactlessFrontend()
+
+ parser = argparse.ArgumentParser(description='nfcpy to wpa_supplicant integration for P2P and WPS NFC operations')
+ parser.add_argument('-d', const=logging.DEBUG, default=logging.INFO,
+ action='store_const', dest='loglevel',
+ help='verbose debug output')
+ parser.add_argument('-q', const=logging.WARNING, action='store_const',
+ dest='loglevel', help='be quiet')
+ parser.add_argument('--only-one', '-1', action='store_true',
+ help='run only one operation and exit')
+ parser.add_argument('--init-on-touch', '-I', action='store_true',
+ help='initiate handover on touch')
+ parser.add_argument('--no-wait', action='store_true',
+ help='do not wait for tag to be removed before exiting')
+ parser.add_argument('--ifname', '-i',
+ help='network interface name')
+ parser.add_argument('--no-wps-req', '-N', action='store_true',
+ help='do not include WPS carrier record in request')
+ parser.add_argument('--no-input', '-a', action='store_true',
+ help='do not use stdout input to initiate handover')
+ parser.add_argument('--tag-read-only', '-t', action='store_true',
+ help='tag read only (do not allow connection handover)')
+ parser.add_argument('--handover-only', action='store_true',
+ help='connection handover only (do not allow tag read)')
+ parser.add_argument('--freq', '-f',
+ help='forced frequency of operating channel in MHz')
+ parser.add_argument('--summary',
+ help='summary file for writing status updates')
+ parser.add_argument('--success',
+ help='success file for writing success update')
+ parser.add_argument('command', choices=['write-p2p-sel'],
+ nargs='?')
+ args = parser.parse_args()
+
+ global only_one
+ only_one = args.only_one
+
+ global no_wait
+ no_wait = args.no_wait
+
+ global force_freq
+ force_freq = args.freq
+
+ logging.basicConfig(level=args.loglevel)
+
+ global init_on_touch
+ init_on_touch = args.init_on_touch
+
+ if args.ifname:
+ global ifname
+ ifname = args.ifname
+ print("Selected ifname " + ifname)
+
+ if args.no_wps_req:
+ global include_wps_req
+ include_wps_req = False
+
+ if args.summary:
+ global summary_file
+ summary_file = args.summary
+
+ if args.success:
+ global success_file
+ success_file = args.success
+
+ if args.no_input:
+ global no_input
+ no_input = True
+
+ clf = nfc.ContactlessFrontend()
+ global wait_connection
+
+ try:
+ if not clf.open("usb"):
+ print("Could not open connection with an NFC device")
+ raise SystemExit
+
+ if args.command == "write-p2p-sel":
+ wps_write_p2p_handover_sel(clf, wait_remove=not args.no_wait)
+ raise SystemExit
+
+ global continue_loop
+ while continue_loop:
+ print("Waiting for a tag or peer to be touched")
+ wait_connection = True
+ try:
+ if args.tag_read_only:
+ if not clf.connect(rdwr={'on-connect': rdwr_connected}):
+ break
+ elif args.handover_only:
+ if not clf.connect(llcp={'on-startup': llcp_startup,
+ 'on-connect': llcp_connected},
+ terminate=terminate_loop):
+ break
+ else:
+ if not clf.connect(rdwr={'on-connect': rdwr_connected},
+ llcp={'on-startup': llcp_startup,
+ 'on-connect': llcp_connected},
+ terminate=terminate_loop):
+ break
+ except Exception as e:
+ print("clf.connect failed")
+
+ global srv
+ if only_one and srv and srv.success:
+ raise SystemExit
+
+ except KeyboardInterrupt:
+ raise SystemExit
+ finally:
+ clf.close()
+
+ raise SystemExit
+
+if __name__ == '__main__':
+ main()
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_connect.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_connect.py
new file mode 100755
index 0000000..bfb5533
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_connect.py
@@ -0,0 +1,299 @@
+#!/usr/bin/python
+# Tests p2p_connect
+# Will try to connect to another peer
+# and form a group
+######### MAY NEED TO RUN AS SUDO #############
+
+import dbus
+import sys, os
+import time
+import gobject
+import getopt
+from dbus.mainloop.glib import DBusGMainLoop
+
+
+def usage():
+ print("Usage:")
+ print(" %s -i <interface_name> -m <wps_method> \ " \
+ % sys.argv[0])
+ print(" -a <addr> [-p <pin>] [-g <go_intent>] \ ")
+ print(" [-w <wpas_dbus_interface>]")
+ print("Options:")
+ print(" -i = interface name")
+ print(" -m = wps method")
+ print(" -a = peer address")
+ print(" -p = pin number (8 digits)")
+ print(" -g = group owner intent")
+ print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
+ print("Example:")
+ print(" %s -i wlan0 -a 0015008352c0 -m display -p 12345670" % sys.argv[0])
+
+
+# Required Signals
+def GONegotiationSuccess(status):
+ print("Go Negotiation Success")
+
+def GONegotiationFailure(status):
+ print('Go Negotiation Failed. Status:')
+ print(format(status))
+ os._exit(0)
+
+def GroupStarted(properties):
+ if properties.has_key("group_object"):
+ print('Group Formation Complete %s' \
+ % properties["group_object"])
+ os._exit(0)
+
+def WpsFailure(status, etc):
+ print("WPS Authentication Failure".format(status))
+ print(etc)
+ os._exit(0)
+
+class P2P_Connect():
+ # Needed Variables
+ global bus
+ global wpas_object
+ global interface_object
+ global p2p_interface
+ global ifname
+ global wpas
+ global wpas_dbus_interface
+ global timeout
+ global path
+ global wps_method
+ global go_intent
+ global addr
+ global pin
+
+ # Dbus Paths
+ global wpas_dbus_opath
+ global wpas_dbus_interfaces_opath
+ global wpas_dbus_interfaces_interface
+ global wpas_dbus_interfaces_p2pdevice
+
+ # Dictionary of Arguments
+ global p2p_connect_arguements
+
+ # Constructor
+ def __init__(self,ifname,wpas_dbus_interface,addr,
+ pin,wps_method,go_intent):
+ # Initializes variables and threads
+ self.ifname = ifname
+ self.wpas_dbus_interface = wpas_dbus_interface
+ self.wps_method = wps_method
+ self.go_intent = go_intent
+ self.addr = addr
+ self.pin = pin
+
+ # Generating interface/object paths
+ self.wpas_dbus_opath = \
+ "/" + self.wpas_dbus_interface.replace(".","/")
+ self.wpas_wpas_dbus_interfaces_opath = \
+ self.wpas_dbus_opath + "/Interfaces"
+ self.wpas_dbus_interfaces_interface = \
+ self.wpas_dbus_interface + ".Interface"
+ self.wpas_dbus_interfaces_p2pdevice = \
+ self.wpas_dbus_interfaces_interface + ".P2PDevice"
+
+ # Getting interfaces and objects
+ DBusGMainLoop(set_as_default=True)
+ self.bus = dbus.SystemBus()
+ self.wpas_object = self.bus.get_object(
+ self.wpas_dbus_interface,
+ self.wpas_dbus_opath)
+ self.wpas = dbus.Interface(
+ self.wpas_object, self.wpas_dbus_interface)
+
+ # See if wpa_supplicant already knows about this interface
+ self.path = None
+ try:
+ self.path = self.wpas.GetInterface(ifname)
+ except dbus.DBusException as exc:
+ if not str(exc).startswith(
+ self.wpas_dbus_interface + \
+ ".InterfaceUnknown:"):
+ raise exc
+ try:
+ path = self.wpas.CreateInterface(
+ {'Ifname': ifname, 'Driver': 'test'})
+ time.sleep(1)
+
+ except dbus.DBusException as exc:
+ if not str(exc).startswith(
+ self.wpas_dbus_interface + \
+ ".InterfaceExists:"):
+ raise exc
+
+ # Get Interface and objects
+ self.interface_object = self.bus.get_object(
+ self.wpas_dbus_interface,self.path)
+ self.p2p_interface = dbus.Interface(
+ self.interface_object,
+ self.wpas_dbus_interfaces_p2pdevice)
+
+ # Add signals
+ self.bus.add_signal_receiver(GONegotiationSuccess,
+ dbus_interface=self.wpas_dbus_interfaces_p2pdevice,
+ signal_name="GONegotiationSuccess")
+ self.bus.add_signal_receiver(GONegotiationFailure,
+ dbus_interface=self.wpas_dbus_interfaces_p2pdevice,
+ signal_name="GONegotiationFailure")
+ self.bus.add_signal_receiver(GroupStarted,
+ dbus_interface=self.wpas_dbus_interfaces_p2pdevice,
+ signal_name="GroupStarted")
+ self.bus.add_signal_receiver(WpsFailure,
+ dbus_interface=self.wpas_dbus_interfaces_p2pdevice,
+ signal_name="WpsFailed")
+
+
+ #Constructing all the arguments needed to connect
+ def constructArguements(self):
+ # Adding required arguments
+ self.p2p_connect_arguements = {'wps_method':self.wps_method,
+ 'peer':dbus.ObjectPath(self.path+'/Peers/'+self.addr)}
+
+ # Display requires a pin, and a go intent of 15
+ if (self.wps_method == 'display'):
+ if (self.pin != None):
+ self.p2p_connect_arguements.update({'pin':self.pin})
+ else:
+ print("Error:\n Pin required for wps_method=display")
+ usage()
+ quit()
+
+ if (self.go_intent != None and int(self.go_intent) != 15):
+ print("go_intent overwritten to 15")
+
+ self.go_intent = '15'
+
+ # Keypad requires a pin, and a go intent of less than 15
+ elif (self.wps_method == 'keypad'):
+ if (self.pin != None):
+ self.p2p_connect_arguements.update({'pin':self.pin})
+ else:
+ print("Error:\n Pin required for wps_method=keypad")
+ usage()
+ quit()
+
+ if (self.go_intent != None and int(self.go_intent) == 15):
+ error = "Error :\n Group Owner intent cannot be" + \
+ " 15 for wps_method=keypad"
+ print(error)
+ usage()
+ quit()
+
+ # Doesn't require pin
+ # for ./wpa_cli, p2p_connect [mac] [pin#], wps_method=keypad
+ elif (self.wps_method == 'pin'):
+ if (self.pin != None):
+ print("pin ignored")
+
+ # No pin is required for pbc so it is ignored
+ elif (self.wps_method == 'pbc'):
+ if (self.pin != None):
+ print("pin ignored")
+
+ else:
+ print("Error:\n wps_method not supported or does not exist")
+ usage()
+ quit()
+
+ # Go_intent is optional for all arguments
+ if (self.go_intent != None):
+ self.p2p_connect_arguements.update(
+ {'go_intent':dbus.Int32(self.go_intent)})
+
+ # Running p2p_connect
+ def run(self):
+ try:
+ result_pin = self.p2p_interface.Connect(
+ self.p2p_connect_arguements)
+
+ except dbus.DBusException as exc:
+ raise exc
+
+ if (self.wps_method == 'pin' and \
+ not self.p2p_connect_arguements.has_key('pin') ):
+ print("Connect return with pin value of %d " % int(result_pin))
+ gobject.MainLoop().run()
+
+if __name__ == "__main__":
+
+ # Required
+ interface_name = None
+ wps_method = None
+ addr = None
+
+ # Conditionally optional
+ pin = None
+
+ # Optional
+ wpas_dbus_interface = 'fi.w1.wpa_supplicant1'
+ go_intent = None
+
+ # Using getopts to handle options
+ try:
+ options, args = getopt.getopt(sys.argv[1:],"hi:m:a:p:g:w:")
+
+ except getopt.GetoptError:
+ usage()
+ quit()
+
+ # If there's a switch, override default option
+ for key, value in options:
+ # Help
+ if (key == "-h"):
+ usage()
+ quit()
+ # Interface Name
+ elif (key == "-i"):
+ interface_name = value
+ # WPS Method
+ elif (key == "-m"):
+ wps_method = value
+ # Address
+ elif (key == "-a"):
+ addr = value
+ # Pin
+ elif (key == "-p"):
+ pin = value
+ # Group Owner Intent
+ elif (key == "-g"):
+ go_intent = value
+ # Dbus interface
+ elif (key == "-w"):
+ wpas_dbus_interface = value
+ else:
+ assert False, "unhandled option"
+
+ # Required Arguments check
+ if (interface_name == None or wps_method == None or addr == None):
+ print("Error:\n Required arguments not specified")
+ usage()
+ quit()
+
+ # Group Owner Intent Check
+ if (go_intent != None and (int(go_intent) > 15 or int(go_intent) < 0) ):
+ print("Error:\n Group Owner Intent must be between 0 and 15 inclusive")
+ usage()
+ quit()
+
+ # Pin Check
+ if (pin != None and len(pin) != 8):
+ print("Error:\n Pin is not 8 digits")
+ usage()
+ quit()
+
+ try:
+ p2p_connect_test = P2P_Connect(interface_name,wpas_dbus_interface,
+ addr,pin,wps_method,go_intent)
+
+ except:
+ print("Error:\n Invalid Arguments")
+ usage()
+ quit()
+
+ p2p_connect_test.constructArguements()
+ p2p_connect_test.run()
+
+ os._exit(0)
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_disconnect.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_disconnect.py
new file mode 100755
index 0000000..f04b98e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_disconnect.py
@@ -0,0 +1,169 @@
+#!/usr/bin/python
+# Tests P2P_Disconnect
+# Will perform disconnect on interface_name
+######### MAY NEED TO RUN AS SUDO #############
+
+import dbus
+import sys, os
+import time
+import gobject
+import threading
+import getopt
+from dbus.mainloop.glib import DBusGMainLoop
+
+def usage():
+ print("Usage:")
+ print(" %s -i <interface_name> \ " \
+ % sys.argv[0])
+ print(" [-w <wpas_dbus_interface>]")
+ print("Options:")
+ print(" -i = interface name")
+ print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
+ print("Example:")
+ print(" %s -i p2p-wlan0-0" % sys.argv[0])
+
+# Required Signals
+def GroupFinished(status, etc):
+ print("Disconnected")
+ os._exit(0)
+
+class P2P_Disconnect (threading.Thread):
+ # Needed Variables
+ global bus
+ global wpas_object
+ global interface_object
+ global p2p_interface
+ global interface_name
+ global wpas
+ global wpas_dbus_interface
+ global path
+ global timeout
+
+ # Dbus Paths
+ global wpas_dbus_opath
+ global wpas_dbus_interfaces_opath
+ global wpas_dbus_interfaces_interface
+ global wpas_dbus_interfaces_p2pdevice
+
+ # Constructor
+ def __init__(self,interface_name,wpas_dbus_interface,timeout):
+ # Initializes variables and threads
+ self.interface_name = interface_name
+ self.wpas_dbus_interface = wpas_dbus_interface
+ self.timeout = timeout
+
+ # Initializes thread and daemon allows for ctrl-c kill
+ threading.Thread.__init__(self)
+ self.daemon = True
+
+ # Generating interface/object paths
+ self.wpas_dbus_opath = "/" + \
+ self.wpas_dbus_interface.replace(".","/")
+ self.wpas_wpas_dbus_interfaces_opath = self.wpas_dbus_opath + \
+ "/Interfaces"
+ self.wpas_dbus_interfaces_interface = \
+ self.wpas_dbus_interface + ".Interface"
+ self.wpas_dbus_interfaces_p2pdevice = \
+ self.wpas_dbus_interfaces_interface \
+ + ".P2PDevice"
+
+ # Getting interfaces and objects
+ DBusGMainLoop(set_as_default=True)
+ self.bus = dbus.SystemBus()
+ self.wpas_object = self.bus.get_object(
+ self.wpas_dbus_interface,
+ self.wpas_dbus_opath)
+ self.wpas = dbus.Interface(self.wpas_object,
+ self.wpas_dbus_interface)
+
+ # Try to see if supplicant knows about interface
+ # If not, throw an exception
+ try:
+ self.path = self.wpas.GetInterface(
+ self.interface_name)
+ except dbus.DBusException as exc:
+ error = 'Error:\n Interface ' + self.interface_name \
+ + ' was not found'
+ print(error)
+ usage()
+ os._exit(0)
+
+ self.interface_object = self.bus.get_object(
+ self.wpas_dbus_interface, self.path)
+ self.p2p_interface = dbus.Interface(self.interface_object,
+ self.wpas_dbus_interfaces_p2pdevice)
+
+ # Signals
+ self.bus.add_signal_receiver(GroupFinished,
+ dbus_interface=self.wpas_dbus_interfaces_p2pdevice,
+ signal_name="GroupFinished")
+
+ # Runs p2p_disconnect
+ def run(self):
+ # Allows other threads to keep working while MainLoop runs
+ # Required for timeout implementation
+ gobject.MainLoop().get_context().iteration(True)
+ gobject.threads_init()
+ self.p2p_interface.Disconnect()
+ gobject.MainLoop().run()
+
+
+if __name__ == "__main__":
+
+ timeout = 5
+ # Defaults for optional inputs
+ wpas_dbus_interface = 'fi.w1.wpa_supplicant1'
+
+ # interface_name is required
+ interface_name = None
+
+ # Using getopts to handle options
+ try:
+ options, args = getopt.getopt(sys.argv[1:],"hi:w:")
+
+ except getopt.GetoptError:
+ usage()
+ quit()
+
+ # If there's a switch, override default option
+ for key, value in options:
+ # Help
+ if (key == "-h"):
+ usage()
+ quit()
+ # Interface Name
+ elif (key == "-i"):
+ interface_name = value
+ # Dbus interface
+ elif (key == "-w"):
+ wpas_dbus_interface = value
+ else:
+ assert False, "unhandled option"
+
+ # Interface name is required and was not given
+ if (interface_name == None):
+ print("Error:\n interface_name is required")
+ usage()
+ quit()
+
+ # Constructor
+ try:
+ p2p_disconnect_test = P2P_Disconnect(interface_name,
+ wpas_dbus_interface,timeout)
+
+ except:
+ print("Error:\n Invalid wpas_dbus_interface")
+ usage()
+ quit()
+
+ # Start P2P_Disconnect
+ p2p_disconnect_test.start()
+
+ try:
+ time.sleep(int(p2p_disconnect_test.timeout))
+
+ except:
+ pass
+
+ print("Disconnect timed out")
+ quit()
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_find.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_find.py
new file mode 100755
index 0000000..412d812
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_find.py
@@ -0,0 +1,192 @@
+#!/usr/bin/python
+# Tests p2p_find
+# Will list all devices found/lost within a time frame (timeout)
+# Then Program will exit
+######### MAY NEED TO RUN AS SUDO #############
+
+import dbus
+import sys, os
+import time
+import gobject
+import threading
+import getopt
+from dbus.mainloop.glib import DBusGMainLoop
+
+def usage():
+ print("Usage:")
+ print(" %s -i <interface_name> [-t <timeout>] \ " \
+ % sys.argv[0])
+ print(" [-w <wpas_dbus_interface>]")
+ print("Options:")
+ print(" -i = interface name")
+ print(" -t = timeout = 0s (infinite)")
+ print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
+ print("Example:")
+ print(" %s -i wlan0 -t 10" % sys.argv[0])
+
+# Required Signals
+def deviceFound(devicepath):
+ print("Device found: %s" % (devicepath))
+
+def deviceLost(devicepath):
+ print("Device lost: %s" % (devicepath))
+
+class P2P_Find (threading.Thread):
+ # Needed Variables
+ global bus
+ global wpas_object
+ global interface_object
+ global p2p_interface
+ global interface_name
+ global wpas
+ global wpas_dbus_interface
+ global timeout
+ global path
+
+ # Dbus Paths
+ global wpas_dbus_opath
+ global wpas_dbus_interfaces_opath
+ global wpas_dbus_interfaces_interface
+ global wpas_dbus_interfaces_p2pdevice
+
+ # Constructor
+ def __init__(self,interface_name,wpas_dbus_interface,timeout):
+ # Initializes variables and threads
+ self.timeout = int(timeout)
+ self.interface_name = interface_name
+ self.wpas_dbus_interface = wpas_dbus_interface
+
+ # Initializes thread and daemon allows for ctrl-c kill
+ threading.Thread.__init__(self)
+ self.daemon = True
+
+ # Generating interface/object paths
+ self.wpas_dbus_opath = "/" + \
+ self.wpas_dbus_interface.replace(".","/")
+ self.wpas_wpas_dbus_interfaces_opath = self.wpas_dbus_opath + \
+ "/Interfaces"
+ self.wpas_dbus_interfaces_interface = \
+ self.wpas_dbus_interface + ".Interface"
+ self.wpas_dbus_interfaces_p2pdevice = \
+ self.wpas_dbus_interfaces_interface \
+ + ".P2PDevice"
+
+ # Getting interfaces and objects
+ DBusGMainLoop(set_as_default=True)
+ self.bus = dbus.SystemBus()
+ self.wpas_object = self.bus.get_object(
+ self.wpas_dbus_interface,
+ self.wpas_dbus_opath)
+ self.wpas = dbus.Interface(self.wpas_object,
+ self.wpas_dbus_interface)
+
+ # Try to see if supplicant knows about interface
+ # If not, throw an exception
+ try:
+ self.path = self.wpas.GetInterface(
+ self.interface_name)
+ except dbus.DBusException as exc:
+ error = 'Error:\n Interface ' + self.interface_name \
+ + ' was not found'
+ print(error)
+ usage()
+ os._exit(0)
+
+ self.interface_object = self.bus.get_object(
+ self.wpas_dbus_interface, self.path)
+ self.p2p_interface = dbus.Interface(self.interface_object,
+ self.wpas_dbus_interfaces_p2pdevice)
+
+ #Adds listeners for find and lost
+ self.bus.add_signal_receiver(deviceFound,
+ dbus_interface=self.wpas_dbus_interfaces_p2pdevice,
+ signal_name="DeviceFound")
+ self.bus.add_signal_receiver(deviceLost,
+ dbus_interface=self.wpas_dbus_interfaces_p2pdevice,
+ signal_name="DeviceLost")
+
+
+ # Sets up p2p_find
+ P2PFindDict = dbus.Dictionary(
+ {'Timeout':int(self.timeout)})
+ self.p2p_interface.Find(P2PFindDict)
+
+ # Run p2p_find
+ def run(self):
+ # Allows other threads to keep working while MainLoop runs
+ # Required for timeout implementation
+ gobject.MainLoop().get_context().iteration(True)
+ gobject.threads_init()
+ gobject.MainLoop().run()
+
+if __name__ == "__main__":
+
+ # Defaults for optional inputs
+ timeout = 0
+ wpas_dbus_interface = 'fi.w1.wpa_supplicant1'
+
+ # interface_name is required
+ interface_name = None
+
+ # Using getopts to handle options
+ try:
+ options, args = getopt.getopt(sys.argv[1:],"hi:t:w:")
+
+ except getopt.GetoptError:
+ usage()
+ quit()
+
+ # If there's a switch, override default option
+ for key, value in options:
+ # Help
+ if (key == "-h"):
+ usage()
+ quit()
+ # Interface Name
+ elif (key == "-i"):
+ interface_name = value
+ # Timeout
+ elif (key == "-t"):
+ if ( int(value) >= 0):
+ timeout = value
+ else:
+ print("Error:\n Timeout cannot be negative")
+ usage()
+ quit()
+ # Dbus interface
+ elif (key == "-w"):
+ wpas_dbus_interface = value
+ else:
+ assert False, "unhandled option"
+
+ # Interface name is required and was not given
+ if (interface_name == None):
+ print("Error:\n interface_name is required")
+ usage()
+ quit()
+
+ # Constructor
+ try:
+ p2p_find_test = P2P_Find(interface_name, wpas_dbus_interface, timeout)
+
+ except:
+ print("Error:\n Invalid wpas_dbus_interface")
+ usage()
+ quit()
+
+ # Start P2P_Find
+ p2p_find_test.start()
+
+ try:
+ # If timeout is 0, then run forever
+ if (timeout == 0):
+ while(True):
+ pass
+ # Else sleep for (timeout)
+ else:
+ time.sleep(p2p_find_test.timeout)
+
+ except:
+ pass
+
+ quit()
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_flush.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_flush.py
new file mode 100755
index 0000000..5cc3a0e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_flush.py
@@ -0,0 +1,168 @@
+#!/usr/bin/python
+# Tests P2P_Flush
+# Will flush the p2p interface
+# Then Program will exit
+######### MAY NEED TO RUN AS SUDO #############
+
+import dbus
+import sys, os
+import time
+import gobject
+import threading
+import getopt
+from dbus.mainloop.glib import DBusGMainLoop
+
+def usage():
+ print("Usage:")
+ print(" %s -i <interface_name> \ " \
+ % sys.argv[0])
+ print(" [-w <wpas_dbus_interface>]")
+ print("Options:")
+ print(" -i = interface name")
+ print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
+ print("Example:")
+ print(" %s -i wlan0" % sys.argv[0])
+
+# Required Signals\
+def deviceLost(devicepath):
+ print("Device lost: %s" % (devicepath))
+
+class P2P_Flush (threading.Thread):
+ # Needed Variables
+ global bus
+ global wpas_object
+ global interface_object
+ global p2p_interface
+ global interface_name
+ global wpas
+ global wpas_dbus_interface
+ global path
+ global timeout
+
+ # Dbus Paths
+ global wpas_dbus_opath
+ global wpas_dbus_interfaces_opath
+ global wpas_dbus_interfaces_interface
+ global wpas_dbus_interfaces_p2pdevice
+
+ # Constructor
+ def __init__(self,interface_name,wpas_dbus_interface,timeout):
+ # Initializes variables and threads
+ self.interface_name = interface_name
+ self.wpas_dbus_interface = wpas_dbus_interface
+ self.timeout = timeout
+
+ # Initializes thread and daemon allows for ctrl-c kill
+ threading.Thread.__init__(self)
+ self.daemon = True
+
+ # Generating interface/object paths
+ self.wpas_dbus_opath = "/" + \
+ self.wpas_dbus_interface.replace(".","/")
+ self.wpas_wpas_dbus_interfaces_opath = self.wpas_dbus_opath + \
+ "/Interfaces"
+ self.wpas_dbus_interfaces_interface = \
+ self.wpas_dbus_interface + ".Interface"
+ self.wpas_dbus_interfaces_p2pdevice = \
+ self.wpas_dbus_interfaces_interface \
+ + ".P2PDevice"
+
+ # Getting interfaces and objects
+ DBusGMainLoop(set_as_default=True)
+ self.bus = dbus.SystemBus()
+ self.wpas_object = self.bus.get_object(
+ self.wpas_dbus_interface,
+ self.wpas_dbus_opath)
+ self.wpas = dbus.Interface(self.wpas_object,
+ self.wpas_dbus_interface)
+
+ # Try to see if supplicant knows about interface
+ # If not, throw an exception
+ try:
+ self.path = self.wpas.GetInterface(
+ self.interface_name)
+ except dbus.DBusException as exc:
+ error = 'Error:\n Interface ' + self.interface_name \
+ + ' was not found'
+ print(error)
+ usage()
+ os._exit(0)
+
+ self.interface_object = self.bus.get_object(
+ self.wpas_dbus_interface, self.path)
+ self.p2p_interface = dbus.Interface(self.interface_object,
+ self.wpas_dbus_interfaces_p2pdevice)
+
+ # Signals
+ self.bus.add_signal_receiver(deviceLost,
+ dbus_interface=self.wpas_dbus_interfaces_p2pdevice,
+ signal_name="DeviceLost")
+
+ # Runs p2p_flush
+ def run(self):
+ # Allows other threads to keep working while MainLoop runs
+ # Required for timeout implementation
+ gobject.MainLoop().get_context().iteration(True)
+ gobject.threads_init()
+ self.p2p_interface.Flush()
+ gobject.MainLoop().run()
+
+
+if __name__ == "__main__":
+ # Needed to show which devices were lost
+ timeout = 5
+ # Defaults for optional inputs
+ wpas_dbus_interface = 'fi.w1.wpa_supplicant1'
+
+ # interface_name is required
+ interface_name = None
+
+ # Using getopts to handle options
+ try:
+ options, args = getopt.getopt(sys.argv[1:],"hi:w:")
+
+ except getopt.GetoptError:
+ usage()
+ quit()
+
+ # If there's a switch, override default option
+ for key, value in options:
+ # Help
+ if (key == "-h"):
+ usage()
+ quit()
+ # Interface Name
+ elif (key == "-i"):
+ interface_name = value
+ # Dbus interface
+ elif (key == "-w"):
+ wpas_dbus_interface = value
+ else:
+ assert False, "unhandled option"
+
+ # Interface name is required and was not given
+ if (interface_name == None):
+ print("Error:\n interface_name is required")
+ usage()
+ quit()
+
+ # Constructor
+ try:
+ p2p_flush_test = P2P_Flush(interface_name, wpas_dbus_interface,timeout)
+
+ except:
+ print("Error:\n Invalid wpas_dbus_interface")
+ usage()
+ quit()
+
+ # Start P2P_Find
+ p2p_flush_test.start()
+
+ try:
+ time.sleep(int(p2p_flush_test.timeout))
+
+ except:
+ pass
+
+ print("p2p_flush complete")
+ quit()
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_group_add.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_group_add.py
new file mode 100755
index 0000000..db6d60d
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_group_add.py
@@ -0,0 +1,222 @@
+#!/usr/bin/python
+# Tests p2p_group_add
+######### MAY NEED TO RUN AS SUDO #############
+
+import dbus
+import sys, os
+import time
+import gobject
+import getopt
+import threading
+from dbus.mainloop.glib import DBusGMainLoop
+
+def usage():
+ print("Usage:")
+ print(" %s -i <interface_name> [-p <persistent>] \ " \
+ % sys.argv[0])
+ print(" [-f <frequency>] [-o <group_object_path>] \ ")
+ print(" [-w <wpas_dbus_interface>]")
+ print("Options:")
+ print(" -i = interface name")
+ print(" -p = persistent group = 0 (0=false, 1=true)")
+ print(" -f = frequency")
+ print(" -o = persistent group object path")
+ print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
+ print("Example:")
+ print(" %s -i wlan0" % sys.argv[0])
+
+# Required Signals
+def GroupStarted(properties):
+ if properties.has_key("group_object"):
+ print('Group Formation Complete %s' \
+ % properties["group_object"])
+ os._exit(0)
+
+def WpsFailure(status, etc):
+ print("WPS Authentication Failure".format(status))
+ print(etc)
+ os._exit(0)
+
+class P2P_Group_Add (threading.Thread):
+ # Needed Variables
+ global bus
+ global wpas_object
+ global interface_object
+ global p2p_interface
+ global interface_name
+ global wpas
+ global wpas_dbus_interface
+ global path
+ global persistent
+ global frequency
+ global persistent_group_object
+
+ # Dbus Paths
+ global wpas_dbus_opath
+ global wpas_dbus_interfaces_opath
+ global wpas_dbus_interfaces_interface
+ global wpas_dbus_interfaces_p2pdevice
+
+ # Arguments
+ global P2PDictionary
+
+ # Constructor
+ def __init__(self,interface_name,wpas_dbus_interface,persistent,frequency,
+ persistent_group_object):
+ # Initializes variables and threads
+ self.interface_name = interface_name
+ self.wpas_dbus_interface = wpas_dbus_interface
+ self.persistent = persistent
+ self.frequency = frequency
+ self.persistent_group_object = persistent_group_object
+
+ # Initializes thread and daemon allows for ctrl-c kill
+ threading.Thread.__init__(self)
+ self.daemon = True
+
+ # Generating interface/object paths
+ self.wpas_dbus_opath = "/" + \
+ self.wpas_dbus_interface.replace(".","/")
+ self.wpas_wpas_dbus_interfaces_opath = self.wpas_dbus_opath + \
+ "/Interfaces"
+ self.wpas_dbus_interfaces_interface = \
+ self.wpas_dbus_interface + ".Interface"
+ self.wpas_dbus_interfaces_p2pdevice = \
+ self.wpas_dbus_interfaces_interface \
+ + ".P2PDevice"
+
+ # Getting interfaces and objects
+ DBusGMainLoop(set_as_default=True)
+ self.bus = dbus.SystemBus()
+ self.wpas_object = self.bus.get_object(
+ self.wpas_dbus_interface,
+ self.wpas_dbus_opath)
+ self.wpas = dbus.Interface(self.wpas_object,
+ self.wpas_dbus_interface)
+
+ # Try to see if supplicant knows about interface
+ # If not, throw an exception
+ try:
+ self.path = self.wpas.GetInterface(
+ self.interface_name)
+ except dbus.DBusException as exc:
+ error = 'Error:\n Interface ' + self.interface_name \
+ + ' was not found'
+ print(error)
+ usage()
+ os._exit(0)
+
+ self.interface_object = self.bus.get_object(
+ self.wpas_dbus_interface, self.path)
+ self.p2p_interface = dbus.Interface(self.interface_object,
+ self.wpas_dbus_interfaces_p2pdevice)
+
+ #Adds listeners
+ self.bus.add_signal_receiver(GroupStarted,
+ dbus_interface=self.wpas_dbus_interfaces_p2pdevice,
+ signal_name="GroupStarted")
+ self.bus.add_signal_receiver(WpsFailure,
+ dbus_interface=self.wpas_dbus_interfaces_p2pdevice,
+ signal_name="WpsFailed")
+
+ # Sets up p2p_group_add dictionary
+ def constructArguments(self):
+ self.P2PDictionary = {'persistent':self.persistent}
+
+ if (self.frequency != None):
+ if (int(self.frequency) > 0):
+ self.P2PDictionary.update({'frequency':int(self.frequency)})
+ else:
+ print("Error:\n Frequency must be greater than 0")
+ usage()
+ os._exit(0)
+
+ if (self.persistent_group_object != None):
+ self.P2PDictionary.update({'persistent_group_object':
+ self.persistent_group_object})
+
+ # Run p2p_group_remove
+ def run(self):
+ try:
+ self.p2p_interface.GroupAdd(self.P2PDictionary)
+
+ except:
+ print("Error:\n Could not perform group add")
+ usage()
+ os._exit(0)
+
+ # Allows other threads to keep working while MainLoop runs
+ # Required for timeout implementation
+ gobject.MainLoop().get_context().iteration(True)
+ gobject.threads_init()
+ gobject.MainLoop().run()
+
+
+if __name__ == "__main__":
+
+ # Defaults for optional inputs
+ # 0 = false, 1 = true
+ persistent = False
+ frequency = None
+ persistent_group_object = None
+ wpas_dbus_interface = 'fi.w1.wpa_supplicant1'
+
+ # interface_name is required
+ interface_name = None
+
+ # Using getopts to handle options
+ try:
+ options, args = getopt.getopt(sys.argv[1:],"hi:p:f:o:w:")
+
+ except getopt.GetoptError:
+ usage()
+ quit()
+
+ # If there's a switch, override default option
+ for key, value in options:
+ # Help
+ if (key == "-h"):
+ usage()
+ quit()
+ # Interface Name
+ elif (key == "-i"):
+ interface_name = value
+ # Timeout
+ elif (key == "-p"):
+ if (value == '0'):
+ persistent = False
+ elif (value == '1'):
+ persistent = True
+ else:
+ print("Error:\n Persistent can only be 1 or 0")
+ usage()
+ os._exit(0)
+ # Frequency
+ elif (key == "-f"):
+ frequency = value
+ # Persistent group object path
+ elif (key == "-o"):
+ persistent_group_object = value
+ # Dbus interface
+ elif (key == "-w"):
+ wpas_dbus_interface = value
+ else:
+ assert False, "unhandled option"
+
+ # Interface name is required and was not given
+ if (interface_name == None):
+ print("Error:\n interface_name is required")
+ usage()
+ quit()
+
+ try:
+ p2p_group_add_test = P2P_Group_Add(interface_name,wpas_dbus_interface,
+ persistent,frequency,persistent_group_object)
+ except:
+ print("Error:\n Invalid Arguments")
+
+ p2p_group_add_test.constructArguments()
+ p2p_group_add_test.start()
+ time.sleep(5)
+ print("Error:\n Group formation timed out")
+ os._exit(0)
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_invite.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_invite.py
new file mode 100755
index 0000000..8944e11
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_invite.py
@@ -0,0 +1,201 @@
+#!/usr/bin/python
+# Tests p2p_invite
+######### MAY NEED TO RUN AS SUDO #############
+
+import dbus
+import sys, os
+import time
+import gobject
+import getopt
+import threading
+from dbus.mainloop.glib import DBusGMainLoop
+
+def usage():
+ print("Usage:")
+ print(" %s -i <interface_name> -a <addr> \ " \
+ % sys.argv[0])
+ print(" [-o <persistent_group_object>] [-w <wpas_dbus_interface>]")
+ print("Options:")
+ print(" -i = interface name")
+ print(" -a = address of peer")
+ print(" -o = persistent group object path")
+ print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
+ print("Example:")
+ print(" %s -i p2p-wlan0-0 -a 00150083523c" % sys.argv[0])
+
+# Required Signals
+def InvitationResult(invite_result):
+ print("Invitation Result signal :")
+ status = invite_result['status']
+ print("status = ", status)
+ if invite_result.has_key('BSSID'):
+ bssid = invite_result['BSSID']
+ print("BSSID = ", hex(bssid[0]) , ":" , \
+ hex(bssid[1]) , ":" , hex(bssid[2]) , ":", \
+ hex(bssid[3]) , ":" , hex(bssid[4]) , ":" , \
+ hex(bssid[5]))
+ os._exit(0)
+
+class P2P_Invite (threading.Thread):
+ # Needed Variables
+ global bus
+ global wpas_object
+ global interface_object
+ global p2p_interface
+ global interface_name
+ global wpas
+ global wpas_dbus_interface
+ global path
+ global addr
+ global persistent_group_object
+
+ # Dbus Paths
+ global wpas_dbus_opath
+ global wpas_dbus_interfaces_opath
+ global wpas_dbus_interfaces_interface
+ global wpas_dbus_interfaces_p2pdevice
+
+ # Arguments
+ global P2PDictionary
+
+ # Constructor
+ def __init__(self,interface_name,wpas_dbus_interface,addr,
+ persistent_group_object):
+ # Initializes variables and threads
+ self.interface_name = interface_name
+ self.wpas_dbus_interface = wpas_dbus_interface
+ self.addr = addr
+ self.persistent_group_object = persistent_group_object
+
+ # Initializes thread and daemon allows for ctrl-c kill
+ threading.Thread.__init__(self)
+ self.daemon = True
+
+ # Generating interface/object paths
+ self.wpas_dbus_opath = "/" + \
+ self.wpas_dbus_interface.replace(".","/")
+ self.wpas_wpas_dbus_interfaces_opath = self.wpas_dbus_opath + \
+ "/Interfaces"
+ self.wpas_dbus_interfaces_interface = \
+ self.wpas_dbus_interface + ".Interface"
+ self.wpas_dbus_interfaces_p2pdevice = \
+ self.wpas_dbus_interfaces_interface \
+ + ".P2PDevice"
+
+ # Getting interfaces and objects
+ DBusGMainLoop(set_as_default=True)
+ self.bus = dbus.SystemBus()
+ self.wpas_object = self.bus.get_object(
+ self.wpas_dbus_interface,
+ self.wpas_dbus_opath)
+ self.wpas = dbus.Interface(self.wpas_object,
+ self.wpas_dbus_interface)
+
+ # Try to see if supplicant knows about interface
+ # If not, throw an exception
+ try:
+ self.path = self.wpas.GetInterface(
+ self.interface_name)
+ except dbus.DBusException as exc:
+ error = 'Error:\n Interface ' + self.interface_name \
+ + ' was not found'
+ print(error)
+ usage()
+ os._exit(0)
+
+ self.interface_object = self.bus.get_object(
+ self.wpas_dbus_interface, self.path)
+ self.p2p_interface = dbus.Interface(self.interface_object,
+ self.wpas_dbus_interfaces_p2pdevice)
+
+ #Adds listeners
+ self.bus.add_signal_receiver(InvitationResult,
+ dbus_interface=self.wpas_dbus_interfaces_p2pdevice,
+ signal_name="InvitationResult")
+
+ # Sets up p2p_invite dictionary
+ def constructArguements(self):
+ self.P2PDictionary = \
+ {'peer':dbus.ObjectPath(self.path+'/Peers/'+self.addr)}
+ if (self.persistent_group_object != None):
+ self.P2PDictionary.update({"persistent_group_object":
+ self.persistent_group_object})
+
+ # Run p2p_invite
+ def run(self):
+ try:
+ self.p2p_interface.Invite(self.P2PDictionary)
+
+ except:
+ print("Error:\n Invalid Arguments")
+ usage()
+ os._exit(0)
+
+ # Allows other threads to keep working while MainLoop runs
+ # Required for timeout implementation
+ gobject.MainLoop().get_context().iteration(True)
+ gobject.threads_init()
+ gobject.MainLoop().run()
+
+if __name__ == "__main__":
+ # Defaults for optional inputs
+ addr = None
+ persistent_group_object = None
+ wpas_dbus_interface = 'fi.w1.wpa_supplicant1'
+
+ # interface_name is required
+ interface_name = None
+
+ # Using getopts to handle options
+ try:
+ options, args = getopt.getopt(sys.argv[1:],"hi:o:w:a:")
+
+ except getopt.GetoptError:
+ usage()
+ quit()
+
+ # If there's a switch, override default option
+ for key, value in options:
+ # Help
+ if (key == "-h"):
+ usage()
+ quit()
+ # Interface Name
+ elif (key == "-i"):
+ interface_name = value
+ elif (key == "-a"):
+ addr = value
+ # Persistent group object path
+ elif (key == "-o"):
+ persistent_group_object = value
+ # Dbus interface
+ elif (key == "-w"):
+ wpas_dbus_interface = value
+ else:
+ assert False, "unhandled option"
+
+ # Interface name is required and was not given
+ if (interface_name == None):
+ print("Error:\n interface_name is required")
+ usage()
+ quit()
+
+ if (addr == None):
+ print("Error:\n peer address is required")
+ usage()
+ quit()
+
+ try:
+ p2p_invite_test = \
+ P2P_Invite(interface_name,wpas_dbus_interface,
+ addr,persistent_group_object)
+ except:
+ print("Error:\n Invalid Arguments")
+ usage()
+ os._exit(1)
+
+ p2p_invite_test.constructArguements()
+ p2p_invite_test.start()
+ time.sleep(10)
+ print("Error:\n p2p_invite timed out")
+ os._exit(0)
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_listen.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_listen.py
new file mode 100755
index 0000000..cbeda9f
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_listen.py
@@ -0,0 +1,182 @@
+#!/usr/bin/python
+# Tests P2P_Find
+# Will listen
+# Then Program will exit
+######### MAY NEED TO RUN AS SUDO #############
+
+import dbus
+import sys, os
+import time
+import gobject
+import threading
+import getopt
+from dbus.mainloop.glib import DBusGMainLoop
+
+def usage():
+ print("Usage:")
+ print(" %s -i <interface_name> [-t <timeout>] \ " \
+ % sys.argv[0])
+ print(" [-w <wpas_dbus_interface>]")
+ print("Options:")
+ print(" -i = interface name")
+ print(" -t = timeout = 0s (infinite)")
+ print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
+ print("Example:")
+ print(" %s -i wlan0 -t 5" % sys.argv[0])
+
+# Required Signals
+def p2pStateChange(status):
+ print(status)
+
+class P2P_Listen(threading.Thread):
+ # Needed Variables
+ global bus
+ global wpas_object
+ global interface_object
+ global p2p_interface
+ global interface_name
+ global wpas
+ global wpas_dbus_interface
+ global path
+ global timeout
+
+ # Dbus Paths
+ global wpas_dbus_opath
+ global wpas_dbus_interfaces_opath
+ global wpas_dbus_interfaces_interface
+ global wpas_dbus_interfaces_p2pdevice
+
+ # Constructor
+ def __init__(self,interface_name,wpas_dbus_interface,timeout):
+ # Initializes variables and threads
+ self.timeout = int(timeout)
+ self.interface_name = interface_name
+ self.wpas_dbus_interface = wpas_dbus_interface
+
+ # Initializes thread and daemon allows for ctrl-c kill
+ threading.Thread.__init__(self)
+ self.daemon = True
+
+ # Generating interface/object paths
+ self.wpas_dbus_opath = "/" + \
+ self.wpas_dbus_interface.replace(".","/")
+ self.wpas_wpas_dbus_interfaces_opath = self.wpas_dbus_opath + \
+ "/Interfaces"
+ self.wpas_dbus_interfaces_interface = \
+ self.wpas_dbus_interface + ".Interface"
+ self.wpas_dbus_interfaces_p2pdevice = \
+ self.wpas_dbus_interfaces_interface \
+ + ".P2PDevice"
+
+ # Getting interfaces and objects
+ DBusGMainLoop(set_as_default=True)
+ self.bus = dbus.SystemBus()
+ self.wpas_object = self.bus.get_object(
+ self.wpas_dbus_interface,
+ self.wpas_dbus_opath)
+ self.wpas = dbus.Interface(self.wpas_object,
+ self.wpas_dbus_interface)
+
+ # Try to see if supplicant knows about interface
+ # If not, throw an exception
+ try:
+ self.path = self.wpas.GetInterface(
+ self.interface_name)
+ except dbus.DBusException as exc:
+ error = 'Error:\n Interface ' + self.interface_name \
+ + ' was not found'
+ print(error)
+ usage()
+ os._exit(0)
+
+ self.interface_object = self.bus.get_object(
+ self.wpas_dbus_interface, self.path)
+ self.p2p_interface = dbus.Interface(self.interface_object,
+ self.wpas_dbus_interfaces_p2pdevice)
+
+ self.bus.add_signal_receiver(p2pStateChange,
+ dbus_interface=self.wpas_dbus_interfaces_p2pdevice,
+ signal_name="P2PStateChanged")
+
+ # Run p2p_find
+ def run(self):
+ # Sets up p2p_listen
+ self.p2p_interface.Listen(int(self.timeout))
+
+ # Allows other threads to keep working while MainLoop runs
+ # Required for timeout implementation
+ gobject.MainLoop().get_context().iteration(True)
+ gobject.threads_init()
+ gobject.MainLoop().run()
+
+if __name__ == "__main__":
+
+ # Defaults for optional inputs
+ timeout = 0
+ wpas_dbus_interface = 'fi.w1.wpa_supplicant1'
+
+ # interface_name is required
+ interface_name = None
+
+ # Using getopts to handle options
+ try:
+ options, args = getopt.getopt(sys.argv[1:],"hi:t:w:")
+
+ except getopt.GetoptError:
+ usage()
+ quit()
+
+ # If there's a switch, override default option
+ for key, value in options:
+ # Help
+ if (key == "-h"):
+ usage()
+ quit()
+ # Interface Name
+ elif (key == "-i"):
+ interface_name = value
+ # Timeout
+ elif (key == "-t"):
+ if ( int(value) >= 0):
+ timeout = value
+ else:
+ print("Error:\n Timeout cannot be negative")
+ usage()
+ quit()
+ # Dbus interface
+ elif (key == "-w"):
+ wpas_dbus_interface = value
+ else:
+ assert False, "unhandled option"
+
+ # Interface name is required and was not given
+ if (interface_name == None):
+ print("Error:\n interface_name is required")
+ usage()
+ quit()
+
+ # Constructor
+ try:
+ p2p_listen_test = P2P_Listen(interface_name, wpas_dbus_interface, timeout)
+
+ except:
+ print("Error:\n Invalid wpas_dbus_interface")
+ usage()
+ quit()
+
+ # Start P2P_Find
+ p2p_listen_test.start()
+
+ try:
+ # If timeout is 0, then run forever
+ if (int(p2p_listen_test.timeout) == 0):
+ while(True):
+ pass
+ # Else sleep for (timeout)
+ else:
+ time.sleep(int(p2p_listen_test.timeout))
+
+ except:
+ pass
+
+ quit()
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_stop_find.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_stop_find.py
new file mode 100755
index 0000000..f367196
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/p2p/p2p_stop_find.py
@@ -0,0 +1,174 @@
+#!/usr/bin/python
+# Tests p2p_stop_find
+######### MAY NEED TO RUN AS SUDO #############
+
+import dbus
+import sys, os
+import time
+import gobject
+import threading
+import getopt
+from dbus.mainloop.glib import DBusGMainLoop
+
+def usage():
+ print("Usage:")
+ print(" %s -i <interface_name> \ " \
+ % sys.argv[0])
+ print(" [-w <wpas_dbus_interface>]")
+ print("Options:")
+ print(" -i = interface name")
+ print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
+ print("Example:")
+ print(" %s -i wlan0" % sys.argv[0])
+
+# Required Signals
+def deviceLost(devicepath):
+ print("Device lost: %s" % (devicepath))
+
+def p2pStateChange(status):
+ print(status)
+ os._exit(0)
+
+class P2P_Stop_Find (threading.Thread):
+ # Needed Variables
+ global bus
+ global wpas_object
+ global interface_object
+ global p2p_interface
+ global interface_name
+ global wpas
+ global wpas_dbus_interface
+ global path
+ global timeout
+
+ # Dbus Paths
+ global wpas_dbus_opath
+ global wpas_dbus_interfaces_opath
+ global wpas_dbus_interfaces_interface
+ global wpas_dbus_interfaces_p2pdevice
+
+ # Constructor
+ def __init__(self,interface_name,wpas_dbus_interface,timeout):
+ # Initializes variables and threads
+ self.interface_name = interface_name
+ self.wpas_dbus_interface = wpas_dbus_interface
+ self.timeout = timeout
+
+ # Initializes thread and daemon allows for ctrl-c kill
+ threading.Thread.__init__(self)
+ self.daemon = True
+
+ # Generating interface/object paths
+ self.wpas_dbus_opath = "/" + \
+ self.wpas_dbus_interface.replace(".","/")
+ self.wpas_wpas_dbus_interfaces_opath = self.wpas_dbus_opath + \
+ "/Interfaces"
+ self.wpas_dbus_interfaces_interface = \
+ self.wpas_dbus_interface + ".Interface"
+ self.wpas_dbus_interfaces_p2pdevice = \
+ self.wpas_dbus_interfaces_interface \
+ + ".P2PDevice"
+
+ # Getting interfaces and objects
+ DBusGMainLoop(set_as_default=True)
+ self.bus = dbus.SystemBus()
+ self.wpas_object = self.bus.get_object(
+ self.wpas_dbus_interface,
+ self.wpas_dbus_opath)
+ self.wpas = dbus.Interface(self.wpas_object,
+ self.wpas_dbus_interface)
+
+ # Try to see if supplicant knows about interface
+ # If not, throw an exception
+ try:
+ self.path = self.wpas.GetInterface(
+ self.interface_name)
+ except dbus.DBusException as exc:
+ error = 'Error:\n Interface ' + self.interface_name \
+ + ' was not found'
+ print(error)
+ usage()
+ os._exit(0)
+
+ self.interface_object = self.bus.get_object(
+ self.wpas_dbus_interface, self.path)
+ self.p2p_interface = dbus.Interface(self.interface_object,
+ self.wpas_dbus_interfaces_p2pdevice)
+
+ # Signals
+ self.bus.add_signal_receiver(deviceLost,
+ dbus_interface=self.wpas_dbus_interfaces_p2pdevice,
+ signal_name="DeviceLost")
+ self.bus.add_signal_receiver(p2pStateChange,
+ dbus_interface=self.wpas_dbus_interfaces_p2pdevice,
+ signal_name="P2PStateChanged")
+
+ # Runs p2p_stop_find
+ def run(self):
+ # Allows other threads to keep working while MainLoop runs
+ # Required for timeout implementation
+ gobject.MainLoop().get_context().iteration(True)
+ gobject.threads_init()
+ self.p2p_interface.StopFind()
+ gobject.MainLoop().run()
+
+
+if __name__ == "__main__":
+ # Needed because P2PStateChanged signal is not caught
+ timeout = 5
+ # Defaults for optional inputs
+ wpas_dbus_interface = 'fi.w1.wpa_supplicant1'
+
+ # interface_name is required
+ interface_name = None
+
+ # Using getopts to handle options
+ try:
+ options, args = getopt.getopt(sys.argv[1:],"ht:i:w:")
+
+ except getopt.GetoptError:
+ usage()
+ quit()
+
+ # If there's a switch, override default option
+ for key, value in options:
+ # Help
+ if (key == "-h"):
+ usage()
+ quit()
+ # Interface Name
+ elif (key == "-i"):
+ interface_name = value
+ # Dbus interface
+ elif (key == "-w"):
+ wpas_dbus_interface = value
+ else:
+ assert False, "unhandled option"
+
+ # Interface name is required and was not given
+ if (interface_name == None):
+ print("Error:\n interface_name is required")
+ usage()
+ quit()
+
+ # Constructor
+ try:
+ p2p_stop_find_test = P2P_Stop_Find(interface_name,
+ wpas_dbus_interface,timeout)
+
+ except:
+ print("Error:\n Invalid wpas_dbus_interface")
+ usage()
+ quit()
+
+ # Start P2P_Find
+ p2p_stop_find_test.start()
+
+ try:
+ time.sleep(int(p2p_stop_find_test.timeout))
+
+ except:
+ pass
+
+ print("p2p find stopped")
+ quit()
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/plaintext.conf b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/plaintext.conf
new file mode 100755
index 0000000..542ac1d
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/plaintext.conf
@@ -0,0 +1,8 @@
+# Plaintext (no encryption) network
+
+ctrl_interface=/var/run/wpa_supplicant
+
+network={
+ ssid="example open network"
+ key_mgmt=NONE
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/udhcpd-p2p.conf b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/udhcpd-p2p.conf
new file mode 100755
index 0000000..f92cc61
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/udhcpd-p2p.conf
@@ -0,0 +1,118 @@
+# Sample udhcpd configuration file (/etc/udhcpd.conf)
+
+# The start and end of the IP lease block
+
+start 192.168.42.20 #default: 192.168.0.20
+end 192.168.42.254 #default: 192.168.0.254
+
+
+# The interface that udhcpd will use
+
+interface wlan2 #default: eth0
+
+
+# The maximum number of leases (includes addresses reserved
+# by OFFER's, DECLINE's, and ARP conflicts)
+
+#max_leases 254 #default: 254
+
+
+# If remaining is true (default), udhcpd will store the time
+# remaining for each lease in the udhcpd leases file. This is
+# for embedded systems that cannot keep time between reboots.
+# If you set remaining to no, the absolute time that the lease
+# expires at will be stored in the dhcpd.leases file.
+
+#remaining yes #default: yes
+
+
+# The time period at which udhcpd will write out a dhcpd.leases
+# file. If this is 0, udhcpd will never automatically write a
+# lease file. (specified in seconds)
+
+#auto_time 7200 #default: 7200 (2 hours)
+
+
+# The amount of time that an IP will be reserved (leased) for if a
+# DHCP decline message is received (seconds).
+
+#decline_time 3600 #default: 3600 (1 hour)
+
+
+# The amount of time that an IP will be reserved (leased) for if an
+# ARP conflct occurs. (seconds
+
+#conflict_time 3600 #default: 3600 (1 hour)
+
+
+# How long an offered address is reserved (leased) in seconds
+
+#offer_time 60 #default: 60 (1 minute)
+
+# If a lease to be given is below this value, the full lease time is
+# instead used (seconds).
+
+#min_lease 60 #default: 60
+
+
+# The location of the leases file
+
+#lease_file /var/lib/misc/udhcpd.leases #default: /var/lib/misc/udhcpd.leases
+
+# The location of the pid file
+pidfile /var/run/udhcpd-wlan2.pid #default: /var/run/udhcpd.pid
+
+# Every time udhcpd writes a leases file, the below script will be called.
+# Useful for writing the lease file to flash every few hours.
+
+#notify_file #default: (no script)
+
+#notify_file dumpleases # <--- useful for debugging
+
+# The following are bootp specific options, setable by udhcpd.
+
+#siaddr 192.168.0.22 #default: 0.0.0.0
+
+#sname zorak #default: (none)
+
+#boot_file /var/nfs_root #default: (none)
+
+# The remainder of options are DHCP options and can be specified with the
+# keyword 'opt' or 'option'. If an option can take multiple items, such
+# as the dns option, they can be listed on the same line, or multiple
+# lines. The only option with a default is 'lease'.
+
+#Examles
+opt dns 192.168.2.1
+option subnet 255.255.255.0
+option domain atherosowl.com
+option lease 864000 # 10 days of seconds
+
+
+# Currently supported options, for more info, see options.c
+#opt subnet
+#opt timezone
+#opt router
+#opt timesvr
+#opt namesvr
+#opt dns
+#opt logsvr
+#opt cookiesvr
+#opt lprsvr
+#opt bootsize
+#opt domain
+#opt swapsvr
+#opt rootpath
+#opt ipttl
+#opt mtu
+#opt broadcast
+#opt wins
+#opt lease
+#opt ntpsrv
+#opt tftp
+#opt bootfile
+
+
+# Static leases map
+#static_lease 00:60:08:11:CE:4E 192.168.0.54
+#static_lease 00:60:08:11:CE:3E 192.168.0.44
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wep.conf b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wep.conf
new file mode 100755
index 0000000..9c7b55f
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wep.conf
@@ -0,0 +1,11 @@
+# Static WEP keys
+
+ctrl_interface=/var/run/wpa_supplicant
+
+network={
+ ssid="example wep network"
+ key_mgmt=NONE
+ wep_key0="abcde"
+ wep_key1=0102030405
+ wep_tx_keyidx=0
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpa-psk-tkip.conf b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpa-psk-tkip.conf
new file mode 100755
index 0000000..93d7fc2
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpa-psk-tkip.conf
@@ -0,0 +1,12 @@
+# WPA-PSK/TKIP
+
+ctrl_interface=/var/run/wpa_supplicant
+
+network={
+ ssid="example wpa-psk network"
+ key_mgmt=WPA-PSK
+ proto=WPA
+ pairwise=TKIP
+ group=TKIP
+ psk="secret passphrase"
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpa2-eap-ccmp.conf b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpa2-eap-ccmp.conf
new file mode 100755
index 0000000..d7a64d8
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpa2-eap-ccmp.conf
@@ -0,0 +1,15 @@
+# WPA2-EAP/CCMP using EAP-TLS
+
+ctrl_interface=/var/run/wpa_supplicant
+
+network={
+ ssid="example wpa2-eap network"
+ key_mgmt=WPA-EAP
+ proto=WPA2
+ pairwise=CCMP
+ group=CCMP
+ eap=TLS
+ ca_cert="/etc/cert/ca.pem"
+ private_key="/etc/cert/user.p12"
+ private_key_passwd="PKCS#12 passhrase"
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpas-dbus-new-getall.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpas-dbus-new-getall.py
new file mode 100755
index 0000000..732f54d
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpas-dbus-new-getall.py
@@ -0,0 +1,58 @@
+#!/usr/bin/python
+
+import dbus
+import sys, os
+import time
+import gobject
+
+def main():
+ bus = dbus.SystemBus()
+ wpas_obj = bus.get_object("fi.w1.wpa_supplicant1",
+ "/fi/w1/wpa_supplicant1")
+ props = wpas_obj.GetAll("fi.w1.wpa_supplicant1",
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ print("GetAll(fi.w1.wpa_supplicant1, /fi/w1/wpa_supplicant1):")
+ print(props)
+
+ if len(sys.argv) != 2:
+ os._exit(1)
+
+ ifname = sys.argv[1]
+
+ wpas = dbus.Interface(wpas_obj, "fi.w1.wpa_supplicant1")
+ path = wpas.GetInterface(ifname)
+ if_obj = bus.get_object("fi.w1.wpa_supplicant1", path)
+ props = if_obj.GetAll("fi.w1.wpa_supplicant1.Interface",
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ print('')
+ print("GetAll(fi.w1.wpa_supplicant1.Interface, %s):" % (path))
+ print(props)
+
+ props = if_obj.GetAll("fi.w1.wpa_supplicant1.Interface.WPS",
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ print('')
+ print("GetAll(fi.w1.wpa_supplicant1.Interface.WPS, %s):" % (path))
+ print(props)
+
+ res = if_obj.Get("fi.w1.wpa_supplicant1.Interface", 'BSSs',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ if len(res) > 0:
+ bss_obj = bus.get_object("fi.w1.wpa_supplicant1", res[0])
+ props = bss_obj.GetAll("fi.w1.wpa_supplicant1.BSS",
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ print('')
+ print("GetAll(fi.w1.wpa_supplicant1.BSS, %s):" % (res[0]))
+ print(props)
+
+ res = if_obj.Get("fi.w1.wpa_supplicant1.Interface", 'Networks',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ if len(res) > 0:
+ net_obj = bus.get_object("fi.w1.wpa_supplicant1", res[0])
+ props = net_obj.GetAll("fi.w1.wpa_supplicant1.Network",
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ print('')
+ print("GetAll(fi.w1.wpa_supplicant1.Network, %s):" % (res[0]))
+ print(props)
+
+if __name__ == "__main__":
+ main()
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpas-dbus-new-signals.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpas-dbus-new-signals.py
new file mode 100755
index 0000000..366a655
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpas-dbus-new-signals.py
@@ -0,0 +1,203 @@
+#!/usr/bin/python
+
+import dbus
+import sys, os
+import time
+import gobject
+from dbus.mainloop.glib import DBusGMainLoop
+
+WPAS_DBUS_SERVICE = "fi.w1.wpa_supplicant1"
+WPAS_DBUS_INTERFACE = "fi.w1.wpa_supplicant1"
+WPAS_DBUS_OPATH = "/fi/w1/wpa_supplicant1"
+
+WPAS_DBUS_INTERFACES_INTERFACE = "fi.w1.wpa_supplicant1.Interface"
+WPAS_DBUS_INTERFACES_OPATH = "/fi/w1/wpa_supplicant1/Interfaces"
+WPAS_DBUS_BSS_INTERFACE = "fi.w1.wpa_supplicant1.BSS"
+WPAS_DBUS_NETWORK_INTERFACE = "fi.w1.wpa_supplicant1.Network"
+
+def byte_array_to_string(s):
+ import urllib
+ r = ""
+ for c in s:
+ if c >= 32 and c < 127:
+ r += "%c" % c
+ else:
+ r += urllib.quote(chr(c))
+ return r
+
+def list_interfaces(wpas_obj):
+ ifaces = wpas_obj.Get(WPAS_DBUS_INTERFACE, 'Interfaces',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ for path in ifaces:
+ if_obj = bus.get_object(WPAS_DBUS_SERVICE, path)
+ ifname = if_obj.Get(WPAS_DBUS_INTERFACES_INTERFACE, 'Ifname',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ print(ifname)
+
+def interfaceAdded(interface, properties):
+ print("InterfaceAdded(%s): Ifname=%s" % (interface, properties['Ifname']))
+
+def interfaceRemoved(interface):
+ print("InterfaceRemoved(%s)" % (interface))
+
+def propertiesChanged(properties):
+ for i in properties:
+ print("PropertiesChanged: %s=%s" % (i, properties[i]))
+
+def showBss(bss):
+ net_obj = bus.get_object(WPAS_DBUS_SERVICE, bss)
+ net = dbus.Interface(net_obj, WPAS_DBUS_BSS_INTERFACE)
+
+ # Convert the byte-array for SSID and BSSID to printable strings
+ val = net_obj.Get(WPAS_DBUS_BSS_INTERFACE, 'BSSID',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ bssid = ""
+ for item in val:
+ bssid = bssid + ":%02x" % item
+ bssid = bssid[1:]
+ val = net_obj.Get(WPAS_DBUS_BSS_INTERFACE, 'SSID',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ ssid = byte_array_to_string(val)
+
+ val = net_obj.Get(WPAS_DBUS_BSS_INTERFACE, 'WPA',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ wpa = "no"
+ if val != None:
+ wpa = "yes"
+ val = net_obj.Get(WPAS_DBUS_BSS_INTERFACE, 'RSN',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ wpa2 = "no"
+ if val != None:
+ wpa2 = "yes"
+ freq = net_obj.Get(WPAS_DBUS_BSS_INTERFACE, 'Frequency',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ signal = net_obj.Get(WPAS_DBUS_BSS_INTERFACE, 'Signal',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ val = net_obj.Get(WPAS_DBUS_BSS_INTERFACE, 'Rates',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ if len(val) > 0:
+ maxrate = val[0] / 1000000
+ else:
+ maxrate = 0
+
+ print(" %s :: ssid='%s' wpa=%s wpa2=%s signal=%d rate=%d freq=%d" % (bssid, ssid, wpa, wpa2, signal, maxrate, freq))
+
+def scanDone(success):
+ gobject.MainLoop().quit()
+ print("Scan done: success=%s" % success)
+
+def scanDone2(success, path=None):
+ print("Scan done: success=%s [path=%s]" % (success, path))
+
+def bssAdded(bss, properties):
+ print("BSS added: %s" % (bss))
+ showBss(bss)
+
+def bssRemoved(bss):
+ print("BSS removed: %s" % (bss))
+
+def blobAdded(blob):
+ print("BlobAdded(%s)" % (blob))
+
+def blobRemoved(blob):
+ print("BlobRemoved(%s)" % (blob))
+
+def networkAdded(network, properties):
+ print("NetworkAdded(%s)" % (network))
+
+def networkRemoved(network):
+ print("NetworkRemoved(%s)" % (network))
+
+def networkSelected(network):
+ print("NetworkSelected(%s)" % (network))
+
+def propertiesChangedInterface(properties):
+ for i in properties:
+ print("PropertiesChanged(interface): %s=%s" % (i, properties[i]))
+
+def propertiesChangedBss(properties):
+ for i in properties:
+ print("PropertiesChanged(BSS): %s=%s" % (i, properties[i]))
+
+def propertiesChangedNetwork(properties):
+ for i in properties:
+ print("PropertiesChanged(Network): %s=%s" % (i, properties[i]))
+
+def main():
+ dbus.mainloop.glib.DBusGMainLoop(set_as_default=True)
+ global bus
+ bus = dbus.SystemBus()
+ wpas_obj = bus.get_object(WPAS_DBUS_SERVICE, WPAS_DBUS_OPATH)
+
+ if len(sys.argv) != 2:
+ list_interfaces(wpas_obj)
+ os._exit(1)
+
+ wpas = dbus.Interface(wpas_obj, WPAS_DBUS_INTERFACE)
+ bus.add_signal_receiver(interfaceAdded,
+ dbus_interface=WPAS_DBUS_INTERFACE,
+ signal_name="InterfaceAdded")
+ bus.add_signal_receiver(interfaceRemoved,
+ dbus_interface=WPAS_DBUS_INTERFACE,
+ signal_name="InterfaceRemoved")
+ bus.add_signal_receiver(propertiesChanged,
+ dbus_interface=WPAS_DBUS_INTERFACE,
+ signal_name="PropertiesChanged")
+
+ ifname = sys.argv[1]
+ path = wpas.GetInterface(ifname)
+ if_obj = bus.get_object(WPAS_DBUS_SERVICE, path)
+ iface = dbus.Interface(if_obj, WPAS_DBUS_INTERFACES_INTERFACE)
+ iface.connect_to_signal("ScanDone", scanDone2,
+ path_keyword='path')
+
+ bus.add_signal_receiver(scanDone,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="ScanDone",
+ path=path)
+ bus.add_signal_receiver(bssAdded,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="BSSAdded",
+ path=path)
+ bus.add_signal_receiver(bssRemoved,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="BSSRemoved",
+ path=path)
+ bus.add_signal_receiver(blobAdded,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="BlobAdded",
+ path=path)
+ bus.add_signal_receiver(blobRemoved,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="BlobRemoved",
+ path=path)
+ bus.add_signal_receiver(networkAdded,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="NetworkAdded",
+ path=path)
+ bus.add_signal_receiver(networkRemoved,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="NetworkRemoved",
+ path=path)
+ bus.add_signal_receiver(networkSelected,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="NetworkSelected",
+ path=path)
+ bus.add_signal_receiver(propertiesChangedInterface,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="PropertiesChanged",
+ path=path)
+
+ bus.add_signal_receiver(propertiesChangedBss,
+ dbus_interface=WPAS_DBUS_BSS_INTERFACE,
+ signal_name="PropertiesChanged")
+
+ bus.add_signal_receiver(propertiesChangedNetwork,
+ dbus_interface=WPAS_DBUS_NETWORK_INTERFACE,
+ signal_name="PropertiesChanged")
+
+ gobject.MainLoop().run()
+
+if __name__ == "__main__":
+ main()
+
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpas-dbus-new-wps.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpas-dbus-new-wps.py
new file mode 100755
index 0000000..7d87b1e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpas-dbus-new-wps.py
@@ -0,0 +1,80 @@
+#!/usr/bin/python
+
+import dbus
+import sys, os
+import time
+import gobject
+from dbus.mainloop.glib import DBusGMainLoop
+
+WPAS_DBUS_SERVICE = "fi.w1.wpa_supplicant1"
+WPAS_DBUS_INTERFACE = "fi.w1.wpa_supplicant1"
+WPAS_DBUS_OPATH = "/fi/w1/wpa_supplicant1"
+
+WPAS_DBUS_INTERFACES_INTERFACE = "fi.w1.wpa_supplicant1.Interface"
+WPAS_DBUS_WPS_INTERFACE = "fi.w1.wpa_supplicant1.Interface.WPS"
+
+def propertiesChanged(properties):
+ if properties.has_key("State"):
+ print("PropertiesChanged: State: %s" % (properties["State"]))
+
+def scanDone(success):
+ print("Scan done: success=%s" % success)
+
+def bssAdded(bss, properties):
+ print("BSS added: %s" % (bss))
+
+def bssRemoved(bss):
+ print("BSS removed: %s" % (bss))
+
+def wpsEvent(name, args):
+ print("WPS event: %s" % (name))
+ print(args)
+
+def credentials(cred):
+ print("WPS credentials: %s" % (cred))
+
+def main():
+ dbus.mainloop.glib.DBusGMainLoop(set_as_default=True)
+ global bus
+ bus = dbus.SystemBus()
+ wpas_obj = bus.get_object(WPAS_DBUS_SERVICE, WPAS_DBUS_OPATH)
+
+ if len(sys.argv) != 2:
+ print("Missing ifname argument")
+ os._exit(1)
+
+ wpas = dbus.Interface(wpas_obj, WPAS_DBUS_INTERFACE)
+ bus.add_signal_receiver(scanDone,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="ScanDone")
+ bus.add_signal_receiver(bssAdded,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="BSSAdded")
+ bus.add_signal_receiver(bssRemoved,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="BSSRemoved")
+ bus.add_signal_receiver(propertiesChanged,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="PropertiesChanged")
+ bus.add_signal_receiver(wpsEvent,
+ dbus_interface=WPAS_DBUS_WPS_INTERFACE,
+ signal_name="Event")
+ bus.add_signal_receiver(credentials,
+ dbus_interface=WPAS_DBUS_WPS_INTERFACE,
+ signal_name="Credentials")
+
+ ifname = sys.argv[1]
+
+ path = wpas.GetInterface(ifname)
+ if_obj = bus.get_object(WPAS_DBUS_SERVICE, path)
+ if_obj.Set(WPAS_DBUS_WPS_INTERFACE, 'ProcessCredentials',
+ dbus.Boolean(1),
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ wps = dbus.Interface(if_obj, WPAS_DBUS_WPS_INTERFACE)
+ wps.Start({'Role': 'enrollee', 'Type': 'pbc'})
+
+ gobject.MainLoop().run()
+
+if __name__ == "__main__":
+ main()
+
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpas-dbus-new.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpas-dbus-new.py
new file mode 100755
index 0000000..6bf74ae
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wpas-dbus-new.py
@@ -0,0 +1,149 @@
+#!/usr/bin/python
+
+import dbus
+import sys, os
+import time
+import gobject
+from dbus.mainloop.glib import DBusGMainLoop
+
+WPAS_DBUS_SERVICE = "fi.w1.wpa_supplicant1"
+WPAS_DBUS_INTERFACE = "fi.w1.wpa_supplicant1"
+WPAS_DBUS_OPATH = "/fi/w1/wpa_supplicant1"
+
+WPAS_DBUS_INTERFACES_INTERFACE = "fi.w1.wpa_supplicant1.Interface"
+WPAS_DBUS_INTERFACES_OPATH = "/fi/w1/wpa_supplicant1/Interfaces"
+WPAS_DBUS_BSS_INTERFACE = "fi.w1.wpa_supplicant1.BSS"
+
+def byte_array_to_string(s):
+ import urllib
+ r = ""
+ for c in s:
+ if c >= 32 and c < 127:
+ r += "%c" % c
+ else:
+ r += urllib.quote(chr(c))
+ return r
+
+def list_interfaces(wpas_obj):
+ ifaces = wpas_obj.Get(WPAS_DBUS_INTERFACE, 'Interfaces',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ for path in ifaces:
+ if_obj = bus.get_object(WPAS_DBUS_SERVICE, path)
+ ifname = if_obj.Get(WPAS_DBUS_INTERFACES_INTERFACE, 'Ifname',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ print(ifname)
+
+def propertiesChanged(properties):
+ if properties.has_key("State"):
+ print("PropertiesChanged: State: %s" % (properties["State"]))
+
+def showBss(bss):
+ net_obj = bus.get_object(WPAS_DBUS_SERVICE, bss)
+ net = dbus.Interface(net_obj, WPAS_DBUS_BSS_INTERFACE)
+
+ # Convert the byte-array for SSID and BSSID to printable strings
+ val = net_obj.Get(WPAS_DBUS_BSS_INTERFACE, 'BSSID',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ bssid = ""
+ for item in val:
+ bssid = bssid + ":%02x" % item
+ bssid = bssid[1:]
+ val = net_obj.Get(WPAS_DBUS_BSS_INTERFACE, 'SSID',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ ssid = byte_array_to_string(val)
+
+ val = net_obj.Get(WPAS_DBUS_BSS_INTERFACE, 'WPA',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ wpa = "no"
+ if len(val["KeyMgmt"]) > 0:
+ wpa = "yes"
+ val = net_obj.Get(WPAS_DBUS_BSS_INTERFACE, 'RSN',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ wpa2 = "no"
+ if len(val["KeyMgmt"]) > 0:
+ wpa2 = "yes"
+ freq = net_obj.Get(WPAS_DBUS_BSS_INTERFACE, 'Frequency',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ signal = net_obj.Get(WPAS_DBUS_BSS_INTERFACE, 'Signal',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ val = net_obj.Get(WPAS_DBUS_BSS_INTERFACE, 'Rates',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+ if len(val) > 0:
+ maxrate = val[0] / 1000000
+ else:
+ maxrate = 0
+
+ print(" %s :: ssid='%s' wpa=%s wpa2=%s signal=%d rate=%d freq=%d" % (bssid, ssid, wpa, wpa2, signal, maxrate, freq))
+
+def scanDone(success):
+ print("Scan done: success=%s" % success)
+
+ res = if_obj.Get(WPAS_DBUS_INTERFACES_INTERFACE, 'BSSs',
+ dbus_interface=dbus.PROPERTIES_IFACE)
+
+ print("Scanned wireless networks:")
+ for opath in res:
+ print(opath)
+ showBss(opath)
+
+def bssAdded(bss, properties):
+ print("BSS added: %s" % (bss))
+ showBss(bss)
+
+def bssRemoved(bss):
+ print("BSS removed: %s" % (bss))
+
+def main():
+ dbus.mainloop.glib.DBusGMainLoop(set_as_default=True)
+ global bus
+ bus = dbus.SystemBus()
+ wpas_obj = bus.get_object(WPAS_DBUS_SERVICE, WPAS_DBUS_OPATH)
+
+ if len(sys.argv) != 2:
+ list_interfaces(wpas_obj)
+ os._exit(1)
+
+ wpas = dbus.Interface(wpas_obj, WPAS_DBUS_INTERFACE)
+ bus.add_signal_receiver(scanDone,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="ScanDone")
+ bus.add_signal_receiver(bssAdded,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="BSSAdded")
+ bus.add_signal_receiver(bssRemoved,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="BSSRemoved")
+ bus.add_signal_receiver(propertiesChanged,
+ dbus_interface=WPAS_DBUS_INTERFACES_INTERFACE,
+ signal_name="PropertiesChanged")
+
+ ifname = sys.argv[1]
+
+ # See if wpa_supplicant already knows about this interface
+ path = None
+ try:
+ path = wpas.GetInterface(ifname)
+ except dbus.DBusException as exc:
+ if not str(exc).startswith("fi.w1.wpa_supplicant1.InterfaceUnknown:"):
+ raise exc
+ try:
+ path = wpas.CreateInterface({'Ifname': ifname, 'Driver': 'test'})
+ time.sleep(1)
+
+ except dbus.DBusException as exc:
+ if not str(exc).startswith("fi.w1.wpa_supplicant1.InterfaceExists:"):
+ raise exc
+
+ global if_obj
+ if_obj = bus.get_object(WPAS_DBUS_SERVICE, path)
+ global iface
+ iface = dbus.Interface(if_obj, WPAS_DBUS_INTERFACES_INTERFACE)
+ iface.Scan({'Type': 'active'})
+
+ gobject.MainLoop().run()
+
+ wpas.RemoveInterface(dbus.ObjectPath(path))
+
+if __name__ == "__main__":
+ main()
+
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wps-ap-cli b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wps-ap-cli
new file mode 100755
index 0000000..15d913e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wps-ap-cli
@@ -0,0 +1,81 @@
+#!/bin/sh
+
+CLI=wpa_cli
+
+pbc()
+{
+ echo "Starting PBC mode"
+ echo "Push button on the station within two minutes"
+ if ! $CLI wps_pbc | grep -q OK; then
+ echo "Failed to enable PBC mode"
+ fi
+}
+
+enter_pin()
+{
+ echo "Enter a PIN from a station to be enrolled to the network."
+ printf "Enrollee PIN: "
+ read pin
+ cpin=`$CLI wps_check_pin "$pin" | tail -1`
+ if [ "$cpin" = "FAIL-CHECKSUM" ]; then
+ echo "Checksum digit is not valid"
+ printf "Do you want to use this PIN (y/n)? "
+ read resp
+ case "$resp" in
+ y*)
+ cpin=`echo "$pin" | sed "s/[^1234567890]//g"`
+ ;;
+ *)
+ return 1
+ ;;
+ esac
+ fi
+ if [ "$cpin" = "FAIL" ]; then
+ echo "Invalid PIN: $pin"
+ return 1
+ fi
+ echo "Enabling Enrollee PIN: $cpin"
+ $CLI wps_pin any "$cpin"
+}
+
+show_config()
+{
+ $CLI status wps
+}
+
+main_menu()
+{
+ echo "WPS AP"
+ echo "------"
+ echo "1: Push button (activate PBC)"
+ echo "2: Enter Enrollee PIN"
+ echo "3: Show current configuration"
+ echo "0: Exit wps-ap-cli"
+
+ printf "Command: "
+ read cmd
+
+ case "$cmd" in
+ 1)
+ pbc
+ ;;
+ 2)
+ enter_pin
+ ;;
+ 3)
+ show_config
+ ;;
+ 0)
+ exit 0
+ ;;
+ *)
+ echo "Unknown command: $cmd"
+ ;;
+ esac
+
+ echo
+ main_menu
+}
+
+
+main_menu
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wps-nfc.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wps-nfc.py
new file mode 100755
index 0000000..bb458fb
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/examples/wps-nfc.py
@@ -0,0 +1,525 @@
+#!/usr/bin/python
+#
+# Example nfcpy to wpa_supplicant wrapper for WPS NFC operations
+# Copyright (c) 2012-2013, Jouni Malinen <j@w1.fi>
+#
+# This software may be distributed under the terms of the BSD license.
+# See README for more details.
+
+import os
+import sys
+import time
+import random
+import threading
+import argparse
+
+import nfc
+import nfc.ndef
+import nfc.llcp
+import nfc.handover
+
+import logging
+
+import wpaspy
+
+wpas_ctrl = '/var/run/wpa_supplicant'
+srv = None
+continue_loop = True
+terminate_now = False
+summary_file = None
+success_file = None
+
+def summary(txt):
+ print(txt)
+ if summary_file:
+ with open(summary_file, 'a') as f:
+ f.write(txt + "\n")
+
+def success_report(txt):
+ summary(txt)
+ if success_file:
+ with open(success_file, 'a') as f:
+ f.write(txt + "\n")
+
+def wpas_connect():
+ ifaces = []
+ if os.path.isdir(wpas_ctrl):
+ try:
+ ifaces = [os.path.join(wpas_ctrl, i) for i in os.listdir(wpas_ctrl)]
+ except OSError as error:
+ print("Could not find wpa_supplicant: ", error)
+ return None
+
+ if len(ifaces) < 1:
+ print("No wpa_supplicant control interface found")
+ return None
+
+ for ctrl in ifaces:
+ try:
+ wpas = wpaspy.Ctrl(ctrl)
+ return wpas
+ except Exception as e:
+ pass
+ return None
+
+
+def wpas_tag_read(message):
+ wpas = wpas_connect()
+ if (wpas == None):
+ return False
+ if "FAIL" in wpas.request("WPS_NFC_TAG_READ " + str(message).encode("hex")):
+ return False
+ return True
+
+def wpas_get_config_token(id=None):
+ wpas = wpas_connect()
+ if (wpas == None):
+ return None
+ if id:
+ ret = wpas.request("WPS_NFC_CONFIG_TOKEN NDEF " + id)
+ else:
+ ret = wpas.request("WPS_NFC_CONFIG_TOKEN NDEF")
+ if "FAIL" in ret:
+ return None
+ return ret.rstrip().decode("hex")
+
+
+def wpas_get_er_config_token(uuid):
+ wpas = wpas_connect()
+ if (wpas == None):
+ return None
+ ret = wpas.request("WPS_ER_NFC_CONFIG_TOKEN NDEF " + uuid)
+ if "FAIL" in ret:
+ return None
+ return ret.rstrip().decode("hex")
+
+
+def wpas_get_password_token():
+ wpas = wpas_connect()
+ if (wpas == None):
+ return None
+ ret = wpas.request("WPS_NFC_TOKEN NDEF")
+ if "FAIL" in ret:
+ return None
+ return ret.rstrip().decode("hex")
+
+def wpas_get_handover_req():
+ wpas = wpas_connect()
+ if (wpas == None):
+ return None
+ ret = wpas.request("NFC_GET_HANDOVER_REQ NDEF WPS-CR")
+ if "FAIL" in ret:
+ return None
+ return ret.rstrip().decode("hex")
+
+
+def wpas_get_handover_sel(uuid):
+ wpas = wpas_connect()
+ if (wpas == None):
+ return None
+ if uuid is None:
+ res = wpas.request("NFC_GET_HANDOVER_SEL NDEF WPS-CR").rstrip()
+ else:
+ res = wpas.request("NFC_GET_HANDOVER_SEL NDEF WPS-CR " + uuid).rstrip()
+ if "FAIL" in res:
+ return None
+ return res.decode("hex")
+
+
+def wpas_report_handover(req, sel, type):
+ wpas = wpas_connect()
+ if (wpas == None):
+ return None
+ return wpas.request("NFC_REPORT_HANDOVER " + type + " WPS " +
+ str(req).encode("hex") + " " +
+ str(sel).encode("hex"))
+
+
+class HandoverServer(nfc.handover.HandoverServer):
+ def __init__(self, llc):
+ super(HandoverServer, self).__init__(llc)
+ self.sent_carrier = None
+ self.ho_server_processing = False
+ self.success = False
+
+ # override to avoid parser error in request/response.pretty() in nfcpy
+ # due to new WSC handover format
+ def _process_request(self, request):
+ summary("received handover request {}".format(request.type))
+ response = nfc.ndef.Message("\xd1\x02\x01Hs\x12")
+ if not request.type == 'urn:nfc:wkt:Hr':
+ summary("not a handover request")
+ else:
+ try:
+ request = nfc.ndef.HandoverRequestMessage(request)
+ except nfc.ndef.DecodeError as e:
+ summary("error decoding 'Hr' message: {}".format(e))
+ else:
+ response = self.process_request(request)
+ summary("send handover response {}".format(response.type))
+ return response
+
+ def process_request(self, request):
+ self.ho_server_processing = True
+ summary("HandoverServer - request received")
+ try:
+ print("Parsed handover request: " + request.pretty())
+ except Exception as e:
+ print(e)
+
+ sel = nfc.ndef.HandoverSelectMessage(version="1.2")
+
+ for carrier in request.carriers:
+ print("Remote carrier type: " + carrier.type)
+ if carrier.type == "application/vnd.wfa.wsc":
+ summary("WPS carrier type match - add WPS carrier record")
+ data = wpas_get_handover_sel(self.uuid)
+ if data is None:
+ summary("Could not get handover select carrier record from wpa_supplicant")
+ continue
+ print("Handover select carrier record from wpa_supplicant:")
+ print(data.encode("hex"))
+ self.sent_carrier = data
+ if "OK" in wpas_report_handover(carrier.record, self.sent_carrier, "RESP"):
+ success_report("Handover reported successfully (responder)")
+ else:
+ summary("Handover report rejected (responder)")
+
+ message = nfc.ndef.Message(data);
+ sel.add_carrier(message[0], "active", message[1:])
+
+ print("Handover select:")
+ try:
+ print(sel.pretty())
+ except Exception as e:
+ print(e)
+ print(str(sel).encode("hex"))
+
+ summary("Sending handover select")
+ self.success = True
+ return sel
+
+
+def wps_handover_init(llc):
+ summary("Trying to initiate WPS handover")
+
+ data = wpas_get_handover_req()
+ if (data == None):
+ summary("Could not get handover request carrier record from wpa_supplicant")
+ return
+ print("Handover request carrier record from wpa_supplicant: " + data.encode("hex"))
+
+ message = nfc.ndef.HandoverRequestMessage(version="1.2")
+ message.nonce = random.randint(0, 0xffff)
+ datamsg = nfc.ndef.Message(data)
+ message.add_carrier(datamsg[0], "active", datamsg[1:])
+
+ print("Handover request:")
+ try:
+ print(message.pretty())
+ except Exception as e:
+ print(e)
+ print(str(message).encode("hex"))
+
+ client = nfc.handover.HandoverClient(llc)
+ try:
+ summary("Trying to initiate NFC connection handover")
+ client.connect()
+ summary("Connected for handover")
+ except nfc.llcp.ConnectRefused:
+ summary("Handover connection refused")
+ client.close()
+ return
+ except Exception as e:
+ summary("Other exception: " + str(e))
+ client.close()
+ return
+
+ summary("Sending handover request")
+
+ if not client.send(message):
+ summary("Failed to send handover request")
+ client.close()
+ return
+
+ summary("Receiving handover response")
+ message = client._recv()
+ if message is None:
+ summary("No response received")
+ client.close()
+ return
+ if message.type != "urn:nfc:wkt:Hs":
+ summary("Response was not Hs - received: " + message.type)
+ client.close()
+ return
+
+ print("Received message")
+ try:
+ print(message.pretty())
+ except Exception as e:
+ print(e)
+ print(str(message).encode("hex"))
+ message = nfc.ndef.HandoverSelectMessage(message)
+ summary("Handover select received")
+ try:
+ print(message.pretty())
+ except Exception as e:
+ print(e)
+
+ for carrier in message.carriers:
+ print("Remote carrier type: " + carrier.type)
+ if carrier.type == "application/vnd.wfa.wsc":
+ print("WPS carrier type match - send to wpa_supplicant")
+ if "OK" in wpas_report_handover(data, carrier.record, "INIT"):
+ success_report("Handover reported successfully (initiator)")
+ else:
+ summary("Handover report rejected (initiator)")
+ # nfcpy does not support the new format..
+ #wifi = nfc.ndef.WifiConfigRecord(carrier.record)
+ #print wifi.pretty()
+
+ print("Remove peer")
+ client.close()
+ print("Done with handover")
+ global only_one
+ if only_one:
+ global continue_loop
+ continue_loop = False
+
+ global no_wait
+ if no_wait:
+ print("Trying to exit..")
+ global terminate_now
+ terminate_now = True
+
+def wps_tag_read(tag, wait_remove=True):
+ success = False
+ if len(tag.ndef.message):
+ for record in tag.ndef.message:
+ print("record type " + record.type)
+ if record.type == "application/vnd.wfa.wsc":
+ summary("WPS tag - send to wpa_supplicant")
+ success = wpas_tag_read(tag.ndef.message)
+ break
+ else:
+ summary("Empty tag")
+
+ if success:
+ success_report("Tag read succeeded")
+
+ if wait_remove:
+ print("Remove tag")
+ while tag.is_present:
+ time.sleep(0.1)
+
+ return success
+
+
+def rdwr_connected_write(tag):
+ summary("Tag found - writing - " + str(tag))
+ global write_data
+ tag.ndef.message = str(write_data)
+ success_report("Tag write succeeded")
+ print("Done - remove tag")
+ global only_one
+ if only_one:
+ global continue_loop
+ continue_loop = False
+ global write_wait_remove
+ while write_wait_remove and tag.is_present:
+ time.sleep(0.1)
+
+def wps_write_config_tag(clf, id=None, wait_remove=True):
+ print("Write WPS config token")
+ global write_data, write_wait_remove
+ write_wait_remove = wait_remove
+ write_data = wpas_get_config_token(id)
+ if write_data == None:
+ print("Could not get WPS config token from wpa_supplicant")
+ sys.exit(1)
+ return
+ print("Touch an NFC tag")
+ clf.connect(rdwr={'on-connect': rdwr_connected_write})
+
+
+def wps_write_er_config_tag(clf, uuid, wait_remove=True):
+ print("Write WPS ER config token")
+ global write_data, write_wait_remove
+ write_wait_remove = wait_remove
+ write_data = wpas_get_er_config_token(uuid)
+ if write_data == None:
+ print("Could not get WPS config token from wpa_supplicant")
+ return
+
+ print("Touch an NFC tag")
+ clf.connect(rdwr={'on-connect': rdwr_connected_write})
+
+
+def wps_write_password_tag(clf, wait_remove=True):
+ print("Write WPS password token")
+ global write_data, write_wait_remove
+ write_wait_remove = wait_remove
+ write_data = wpas_get_password_token()
+ if write_data == None:
+ print("Could not get WPS password token from wpa_supplicant")
+ return
+
+ print("Touch an NFC tag")
+ clf.connect(rdwr={'on-connect': rdwr_connected_write})
+
+
+def rdwr_connected(tag):
+ global only_one, no_wait
+ summary("Tag connected: " + str(tag))
+
+ if tag.ndef:
+ print("NDEF tag: " + tag.type)
+ try:
+ print(tag.ndef.message.pretty())
+ except Exception as e:
+ print(e)
+ success = wps_tag_read(tag, not only_one)
+ if only_one and success:
+ global continue_loop
+ continue_loop = False
+ else:
+ summary("Not an NDEF tag - remove tag")
+ return True
+
+ return not no_wait
+
+
+def llcp_worker(llc):
+ global arg_uuid
+ if arg_uuid is None:
+ wps_handover_init(llc)
+ print("Exiting llcp_worker thread")
+ return
+
+ global srv
+ global wait_connection
+ while not wait_connection and srv.sent_carrier is None:
+ if srv.ho_server_processing:
+ time.sleep(0.025)
+
+def llcp_startup(clf, llc):
+ global arg_uuid
+ if arg_uuid:
+ print("Start LLCP server")
+ global srv
+ srv = HandoverServer(llc)
+ if arg_uuid is "ap":
+ print("Trying to handle WPS handover")
+ srv.uuid = None
+ else:
+ print("Trying to handle WPS handover with AP " + arg_uuid)
+ srv.uuid = arg_uuid
+ return llc
+
+def llcp_connected(llc):
+ print("P2P LLCP connected")
+ global wait_connection
+ wait_connection = False
+ global arg_uuid
+ if arg_uuid:
+ global srv
+ srv.start()
+ else:
+ threading.Thread(target=llcp_worker, args=(llc,)).start()
+ print("llcp_connected returning")
+ return True
+
+
+def terminate_loop():
+ global terminate_now
+ return terminate_now
+
+def main():
+ clf = nfc.ContactlessFrontend()
+
+ parser = argparse.ArgumentParser(description='nfcpy to wpa_supplicant integration for WPS NFC operations')
+ parser.add_argument('-d', const=logging.DEBUG, default=logging.INFO,
+ action='store_const', dest='loglevel',
+ help='verbose debug output')
+ parser.add_argument('-q', const=logging.WARNING, action='store_const',
+ dest='loglevel', help='be quiet')
+ parser.add_argument('--only-one', '-1', action='store_true',
+ help='run only one operation and exit')
+ parser.add_argument('--no-wait', action='store_true',
+ help='do not wait for tag to be removed before exiting')
+ parser.add_argument('--uuid',
+ help='UUID of an AP (used for WPS ER operations)')
+ parser.add_argument('--id',
+ help='network id (used for WPS ER operations)')
+ parser.add_argument('--summary',
+ help='summary file for writing status updates')
+ parser.add_argument('--success',
+ help='success file for writing success update')
+ parser.add_argument('command', choices=['write-config',
+ 'write-er-config',
+ 'write-password'],
+ nargs='?')
+ args = parser.parse_args()
+
+ global arg_uuid
+ arg_uuid = args.uuid
+
+ global only_one
+ only_one = args.only_one
+
+ global no_wait
+ no_wait = args.no_wait
+
+ if args.summary:
+ global summary_file
+ summary_file = args.summary
+
+ if args.success:
+ global success_file
+ success_file = args.success
+
+ logging.basicConfig(level=args.loglevel)
+
+ try:
+ if not clf.open("usb"):
+ print("Could not open connection with an NFC device")
+ raise SystemExit
+
+ if args.command == "write-config":
+ wps_write_config_tag(clf, id=args.id, wait_remove=not args.no_wait)
+ raise SystemExit
+
+ if args.command == "write-er-config":
+ wps_write_er_config_tag(clf, args.uuid, wait_remove=not args.no_wait)
+ raise SystemExit
+
+ if args.command == "write-password":
+ wps_write_password_tag(clf, wait_remove=not args.no_wait)
+ raise SystemExit
+
+ global continue_loop
+ while continue_loop:
+ print("Waiting for a tag or peer to be touched")
+ wait_connection = True
+ try:
+ if not clf.connect(rdwr={'on-connect': rdwr_connected},
+ llcp={'on-startup': llcp_startup,
+ 'on-connect': llcp_connected},
+ terminate=terminate_loop):
+ break
+ except Exception as e:
+ print("clf.connect failed")
+
+ global srv
+ if only_one and srv and srv.success:
+ raise SystemExit
+
+ except KeyboardInterrupt:
+ raise SystemExit
+ finally:
+ clf.close()
+
+ raise SystemExit
+
+if __name__ == '__main__':
+ main()
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/gas_query.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/gas_query.h
new file mode 100755
index 0000000..6ccecd4
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/gas_query.h
@@ -0,0 +1,59 @@
+/*
+ * Generic advertisement service (GAS) query
+ * Copyright (c) 2009, Atheros Communications
+ * Copyright (c) 2011, Qualcomm Atheros
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef GAS_QUERY_H
+#define GAS_QUERY_H
+
+struct gas_query;
+
+#ifdef CONFIG_GAS
+
+struct gas_query * gas_query_init(struct wpa_supplicant *wpa_s);
+void gas_query_deinit(struct gas_query *gas);
+int gas_query_rx(struct gas_query *gas, const u8 *da, const u8 *sa,
+ const u8 *bssid, u8 categ, const u8 *data, size_t len,
+ int freq);
+
+/**
+ * enum gas_query_result - GAS query result
+ */
+enum gas_query_result {
+ GAS_QUERY_SUCCESS,
+ GAS_QUERY_FAILURE,
+ GAS_QUERY_TIMEOUT,
+ GAS_QUERY_PEER_ERROR,
+ GAS_QUERY_INTERNAL_ERROR,
+ GAS_QUERY_STOPPED,
+ GAS_QUERY_DELETED_AT_DEINIT
+};
+
+int gas_query_req(struct gas_query *gas, const u8 *dst, int freq,
+ int wildcard_bssid, int maintain_addr, struct wpabuf *req,
+ void (*cb)(void *ctx, const u8 *dst, u8 dialog_token,
+ enum gas_query_result result,
+ const struct wpabuf *adv_proto,
+ const struct wpabuf *resp, u16 status_code),
+ void *ctx);
+int gas_query_stop(struct gas_query *gas, u8 dialog_token);
+
+#else /* CONFIG_GAS */
+
+static inline struct gas_query * gas_query_init(struct wpa_supplicant *wpa_s)
+{
+ return (void *) 1;
+}
+
+static inline void gas_query_deinit(struct gas_query *gas)
+{
+}
+
+#endif /* CONFIG_GAS */
+
+
+#endif /* GAS_QUERY_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/hs20_supplicant.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/hs20_supplicant.h
new file mode 100755
index 0000000..e43414b
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/hs20_supplicant.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2011-2013, Qualcomm Atheros, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef HS20_SUPPLICANT_H
+#define HS20_SUPPLICANT_H
+
+void hs20_configure_frame_filters(struct wpa_supplicant *wpa_s);
+void wpas_hs20_add_indication(struct wpabuf *buf, int pps_mo_id,
+ int ap_release);
+void wpas_hs20_add_roam_cons_sel(struct wpabuf *buf,
+ const struct wpa_ssid *ssid);
+
+int hs20_anqp_send_req(struct wpa_supplicant *wpa_s, const u8 *dst, u32 stypes,
+ const u8 *payload, size_t payload_len, int inmem);
+void hs20_put_anqp_req(u32 stypes, const u8 *payload, size_t payload_len,
+ struct wpabuf *buf);
+void hs20_parse_rx_hs20_anqp_resp(struct wpa_supplicant *wpa_s,
+ struct wpa_bss *bss, const u8 *sa,
+ const u8 *data, size_t slen, u8 dialog_token);
+int get_hs20_version(struct wpa_bss *bss);
+int is_hs20_network(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid,
+ struct wpa_bss *bss);
+int hs20_get_pps_mo_id(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid);
+void hs20_notify_parse_done(struct wpa_supplicant *wpa_s);
+
+void hs20_rx_subscription_remediation(struct wpa_supplicant *wpa_s,
+ const char *url, u8 osu_method);
+void hs20_rx_deauth_imminent_notice(struct wpa_supplicant *wpa_s, u8 code,
+ u16 reauth_delay, const char *url);
+void hs20_rx_t_c_acceptance(struct wpa_supplicant *wpa_s, const char *url);
+
+void hs20_free_osu_prov(struct wpa_supplicant *wpa_s);
+void hs20_next_osu_icon(struct wpa_supplicant *wpa_s);
+void hs20_osu_icon_fetch(struct wpa_supplicant *wpa_s);
+int hs20_fetch_osu(struct wpa_supplicant *wpa_s, int skip_scan);
+void hs20_cancel_fetch_osu(struct wpa_supplicant *wpa_s);
+void hs20_icon_fetch_failed(struct wpa_supplicant *wpa_s);
+void hs20_start_osu_scan(struct wpa_supplicant *wpa_s);
+void hs20_init(struct wpa_supplicant *wpa_s);
+void hs20_deinit(struct wpa_supplicant *wpa_s);
+int hs20_get_icon(struct wpa_supplicant *wpa_s, const u8 *bssid,
+ const char *file_name, size_t offset, size_t size,
+ char *reply, size_t buf_len);
+int hs20_del_icon(struct wpa_supplicant *wpa_s, const u8 *bssid,
+ const char *file_name);
+
+#endif /* HS20_SUPPLICANT_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/ibss_rsn.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/ibss_rsn.h
new file mode 100755
index 0000000..626c543
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/ibss_rsn.h
@@ -0,0 +1,65 @@
+/*
+ * wpa_supplicant - IBSS RSN
+ * Copyright (c) 2009, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef IBSS_RSN_H
+#define IBSS_RSN_H
+
+struct ibss_rsn;
+
+/* not authenticated */
+#define IBSS_RSN_AUTH_NOT_AUTHENTICATED 0x00
+/* remote peer sent an EAPOL message */
+#define IBSS_RSN_AUTH_EAPOL_BY_PEER 0x01
+/* we sent an AUTH message with seq 1 */
+#define IBSS_RSN_AUTH_BY_US 0x02
+/* we sent an EAPOL message */
+#define IBSS_RSN_AUTH_EAPOL_BY_US 0x04
+/* PTK derived as supplicant */
+#define IBSS_RSN_SET_PTK_SUPP 0x08
+/* PTK derived as authenticator */
+#define IBSS_RSN_SET_PTK_AUTH 0x10
+/* PTK completion reported */
+#define IBSS_RSN_REPORTED_PTK 0x20
+
+struct ibss_rsn_peer {
+ struct ibss_rsn_peer *next;
+ struct ibss_rsn *ibss_rsn;
+
+ u8 addr[ETH_ALEN];
+
+ struct wpa_sm *supp;
+ enum wpa_states supp_state;
+ u8 supp_ie[80];
+ size_t supp_ie_len;
+
+ struct wpa_state_machine *auth;
+ int authentication_status;
+
+ struct os_reltime own_auth_tx;
+};
+
+struct ibss_rsn {
+ struct wpa_supplicant *wpa_s;
+ struct wpa_authenticator *auth_group;
+ struct ibss_rsn_peer *peers;
+ u8 psk[PMK_LEN];
+};
+
+
+struct ibss_rsn * ibss_rsn_init(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void ibss_rsn_deinit(struct ibss_rsn *ibss_rsn);
+int ibss_rsn_start(struct ibss_rsn *ibss_rsn, const u8 *addr);
+void ibss_rsn_stop(struct ibss_rsn *ibss_rsn, const u8 *peermac);
+int ibss_rsn_rx_eapol(struct ibss_rsn *ibss_rsn, const u8 *src_addr,
+ const u8 *buf, size_t len);
+void ibss_rsn_set_psk(struct ibss_rsn *ibss_rsn, const u8 *psk);
+void ibss_rsn_handle_auth(struct ibss_rsn *ibss_rsn, const u8 *auth_frame,
+ size_t len);
+
+#endif /* IBSS_RSN_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/interworking.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/interworking.h
new file mode 100755
index 0000000..77b2c91
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/interworking.h
@@ -0,0 +1,37 @@
+/*
+ * Interworking (IEEE 802.11u)
+ * Copyright (c) 2011-2012, Qualcomm Atheros
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef INTERWORKING_H
+#define INTERWORKING_H
+
+enum gas_query_result;
+
+int anqp_send_req(struct wpa_supplicant *wpa_s, const u8 *dst, int freq,
+ u16 info_ids[], size_t num_ids, u32 subtypes,
+ u32 mbo_subtypes);
+void anqp_resp_cb(void *ctx, const u8 *dst, u8 dialog_token,
+ enum gas_query_result result,
+ const struct wpabuf *adv_proto,
+ const struct wpabuf *resp, u16 status_code);
+int gas_send_request(struct wpa_supplicant *wpa_s, const u8 *dst,
+ const struct wpabuf *adv_proto,
+ const struct wpabuf *query);
+int interworking_fetch_anqp(struct wpa_supplicant *wpa_s);
+void interworking_stop_fetch_anqp(struct wpa_supplicant *wpa_s);
+int interworking_select(struct wpa_supplicant *wpa_s, int auto_select,
+ int *freqs);
+int interworking_connect(struct wpa_supplicant *wpa_s, struct wpa_bss *bss,
+ int only_add);
+void interworking_start_fetch_anqp(struct wpa_supplicant *wpa_s);
+int interworking_home_sp_cred(struct wpa_supplicant *wpa_s,
+ struct wpa_cred *cred,
+ struct wpabuf *domain_names);
+int domain_name_list_contains(struct wpabuf *domain_names,
+ const char *domain, int exact_match);
+
+#endif /* INTERWORKING_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/mesh.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/mesh.h
new file mode 100755
index 0000000..a429e5e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/mesh.h
@@ -0,0 +1,49 @@
+/*
+ * WPA Supplicant - Basic mesh mode routines
+ * Copyright (c) 2013-2014, cozybit, Inc. All rights reserved.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef MESH_H
+#define MESH_H
+
+int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+int wpa_supplicant_leave_mesh(struct wpa_supplicant *wpa_s,
+ bool need_deinit);
+void wpa_supplicant_mesh_iface_deinit(struct wpa_supplicant *wpa_s,
+ struct hostapd_iface *ifmsh,
+ bool also_clear_hostapd);
+int wpas_mesh_scan_result_text(const u8 *ies, size_t ies_len, char *buf,
+ char *end);
+int wpas_mesh_add_interface(struct wpa_supplicant *wpa_s, char *ifname,
+ size_t len);
+int wpas_mesh_peer_remove(struct wpa_supplicant *wpa_s, const u8 *addr);
+int wpas_mesh_peer_add(struct wpa_supplicant *wpa_s, const u8 *addr,
+ int duration);
+
+#ifdef CONFIG_MESH
+
+void wpa_mesh_notify_peer(struct wpa_supplicant *wpa_s, const u8 *addr,
+ const u8 *ies, size_t ie_len);
+void wpa_supplicant_mesh_add_scan_ie(struct wpa_supplicant *wpa_s,
+ struct wpabuf **extra_ie);
+
+#else /* CONFIG_MESH */
+
+static inline void wpa_mesh_notify_peer(struct wpa_supplicant *wpa_s,
+ const u8 *addr,
+ const u8 *ies, size_t ie_len)
+{
+}
+
+static inline void wpa_supplicant_mesh_add_scan_ie(struct wpa_supplicant *wpa_s,
+ struct wpabuf **extra_ie)
+{
+}
+
+#endif /* CONFIG_MESH */
+
+#endif /* MESH_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/mesh_mpm.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/mesh_mpm.h
new file mode 100755
index 0000000..5fc1e61
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/mesh_mpm.h
@@ -0,0 +1,46 @@
+/*
+ * WPA Supplicant - Basic mesh peer management
+ * Copyright (c) 2013-2014, cozybit, Inc. All rights reserved.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef MESH_MPM_H
+#define MESH_MPM_H
+
+/* notify MPM of new mesh peer to be inserted in MPM and driver */
+void wpa_mesh_new_mesh_peer(struct wpa_supplicant *wpa_s, const u8 *addr,
+ struct ieee802_11_elems *elems);
+void mesh_mpm_deinit(struct wpa_supplicant *wpa_s, struct hostapd_iface *ifmsh);
+void mesh_mpm_auth_peer(struct wpa_supplicant *wpa_s, const u8 *addr);
+void mesh_mpm_free_sta(struct hostapd_data *hapd, struct sta_info *sta);
+void wpa_mesh_set_plink_state(struct wpa_supplicant *wpa_s,
+ struct sta_info *sta,
+ enum mesh_plink_state state);
+int mesh_mpm_close_peer(struct wpa_supplicant *wpa_s, const u8 *addr);
+int mesh_mpm_connect_peer(struct wpa_supplicant *wpa_s, const u8 *addr,
+ int duration);
+
+#ifdef CONFIG_MESH
+
+void mesh_mpm_action_rx(struct wpa_supplicant *wpa_s,
+ const struct ieee80211_mgmt *mgmt, size_t len);
+void mesh_mpm_mgmt_rx(struct wpa_supplicant *wpa_s, struct rx_mgmt *rx_mgmt);
+
+#else /* CONFIG_MESH */
+
+static inline void mesh_mpm_action_rx(struct wpa_supplicant *wpa_s,
+ const struct ieee80211_mgmt *mgmt,
+ size_t len)
+{
+}
+
+static inline void mesh_mpm_mgmt_rx(struct wpa_supplicant *wpa_s,
+ struct rx_mgmt *rx_mgmt)
+{
+}
+
+#endif /* CONFIG_MESH */
+
+#endif /* MESH_MPM_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/mesh_rsn.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/mesh_rsn.h
new file mode 100755
index 0000000..8775ced
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/mesh_rsn.h
@@ -0,0 +1,45 @@
+/*
+ * WPA Supplicant - Mesh RSN routines
+ * Copyright (c) 2013-2014, cozybit, Inc. All rights reserved.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef MESH_RSN_H
+#define MESH_RSN_H
+
+struct mesh_rsn {
+ struct wpa_supplicant *wpa_s;
+ struct wpa_authenticator *auth;
+ unsigned int pairwise_cipher;
+ unsigned int group_cipher;
+ u8 mgtk[WPA_TK_MAX_LEN];
+ size_t mgtk_len;
+ u8 mgtk_key_id;
+ unsigned int mgmt_group_cipher;
+ u8 igtk_key_id;
+ u8 igtk[WPA_TK_MAX_LEN];
+ size_t igtk_len;
+#ifdef CONFIG_SAE
+ struct wpabuf *sae_token;
+ int sae_group_index;
+#endif /* CONFIG_SAE */
+};
+
+struct mesh_rsn * mesh_rsn_auth_init(struct wpa_supplicant *wpa_s,
+ struct mesh_conf *conf);
+int mesh_rsn_auth_sae_sta(struct wpa_supplicant *wpa_s, struct sta_info *sta);
+int mesh_rsn_derive_mtk(struct wpa_supplicant *wpa_s, struct sta_info *sta);
+void mesh_rsn_get_pmkid(struct mesh_rsn *rsn, struct sta_info *sta, u8 *pmkid);
+void mesh_rsn_init_ampe_sta(struct wpa_supplicant *wpa_s,
+ struct sta_info *sta);
+int mesh_rsn_protect_frame(struct mesh_rsn *rsn, struct sta_info *sta,
+ const u8 *cat, struct wpabuf *buf);
+int mesh_rsn_process_ampe(struct wpa_supplicant *wpa_s, struct sta_info *sta,
+ struct ieee802_11_elems *elems, const u8 *cat,
+ const u8 *chosen_pmk,
+ const u8 *start, size_t elems_len);
+void mesh_auth_timer(void *eloop_ctx, void *user_data);
+
+#endif /* MESH_RSN_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/nmake.mak b/ap/app/wpa_supplicant-2.10/wpa_supplicant/nmake.mak
new file mode 100755
index 0000000..617df03
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/nmake.mak
@@ -0,0 +1,240 @@
+# Makefile for Microsoft nmake to build wpa_supplicant
+
+# This can be run in Visual Studio 2005 Command Prompt
+
+# Note: Make sure that cl.exe is configured to include Platform SDK
+# include and lib directories (vsvars32.bat)
+
+all: wpa_supplicant.exe wpa_cli.exe wpa_passphrase.exe wpasvc.exe win_if_list.exe
+
+# Root directory for WinPcap developer's pack
+# (http://www.winpcap.org/install/bin/WpdPack_3_1.zip)
+WINPCAPDIR=C:\dev\WpdPack
+
+# Root directory for OpenSSL
+# (http://www.openssl.org/source/openssl-0.9.8a.tar.gz)
+# Build and installed following instructions in INSTALL.W32
+# Note: If EAP-FAST is included in the build, OpenSSL needs to be patched to
+# support it (openssl-tls-extensions.patch)
+# Alternatively, see README-Windows.txt for information about binary
+# installation package for OpenSSL.
+OPENSSLDIR=C:\dev\openssl
+
+CC = cl
+OBJDIR = objs
+
+CFLAGS = /DCONFIG_NATIVE_WINDOWS
+CFLAGS = $(CFLAGS) /DCONFIG_NDIS_EVENTS_INTEGRATED
+CFLAGS = $(CFLAGS) /DCONFIG_ANSI_C_EXTRA
+CFLAGS = $(CFLAGS) /DCONFIG_WINPCAP
+CFLAGS = $(CFLAGS) /DIEEE8021X_EAPOL
+CFLAGS = $(CFLAGS) /DPKCS12_FUNCS
+CFLAGS = $(CFLAGS) /DEAP_MD5
+CFLAGS = $(CFLAGS) /DEAP_TLS
+CFLAGS = $(CFLAGS) /DEAP_MSCHAPv2
+CFLAGS = $(CFLAGS) /DEAP_PEAP
+CFLAGS = $(CFLAGS) /DEAP_TTLS
+CFLAGS = $(CFLAGS) /DEAP_GTC
+CFLAGS = $(CFLAGS) /DEAP_OTP
+CFLAGS = $(CFLAGS) /DEAP_SIM
+CFLAGS = $(CFLAGS) /DEAP_LEAP
+CFLAGS = $(CFLAGS) /DEAP_PSK
+CFLAGS = $(CFLAGS) /DEAP_AKA
+#CFLAGS = $(CFLAGS) /DEAP_FAST
+CFLAGS = $(CFLAGS) /DEAP_PAX
+CFLAGS = $(CFLAGS) /DEAP_TNC
+CFLAGS = $(CFLAGS) /DPCSC_FUNCS
+CFLAGS = $(CFLAGS) /DCONFIG_CTRL_IFACE
+CFLAGS = $(CFLAGS) /DCONFIG_CTRL_IFACE_NAMED_PIPE
+CFLAGS = $(CFLAGS) /DCONFIG_DRIVER_NDIS
+CFLAGS = $(CFLAGS) /I..\src /I..\src\utils
+CFLAGS = $(CFLAGS) /I.
+CFLAGS = $(CFLAGS) /DWIN32
+CFLAGS = $(CFLAGS) /Fo$(OBJDIR)\\ /c
+CFLAGS = $(CFLAGS) /W3
+
+#CFLAGS = $(CFLAGS) /WX
+
+# VS 2005 complains about lot of deprecated string functions; let's ignore them
+# at least for now since snprintf and strncpy can be used in a safe way
+CFLAGS = $(CFLAGS) /D_CRT_SECURE_NO_DEPRECATE
+
+OBJS = \
+ $(OBJDIR)\os_win32.obj \
+ $(OBJDIR)\eloop_win.obj \
+ $(OBJDIR)\sha1.obj \
+ $(OBJDIR)\sha1-tlsprf.obj \
+ $(OBJDIR)\sha1-pbkdf2.obj \
+ $(OBJDIR)\md5.obj \
+ $(OBJDIR)\aes-cbc.obj \
+ $(OBJDIR)\aes-ctr.obj \
+ $(OBJDIR)\aes-eax.obj \
+ $(OBJDIR)\aes-encblock.obj \
+ $(OBJDIR)\aes-omac1.obj \
+ $(OBJDIR)\aes-unwrap.obj \
+ $(OBJDIR)\aes-wrap.obj \
+ $(OBJDIR)\common.obj \
+ $(OBJDIR)\wpa_debug.obj \
+ $(OBJDIR)\wpabuf.obj \
+ $(OBJDIR)\wpa_supplicant.obj \
+ $(OBJDIR)\wpa.obj \
+ $(OBJDIR)\wpa_common.obj \
+ $(OBJDIR)\wpa_ie.obj \
+ $(OBJDIR)\preauth.obj \
+ $(OBJDIR)\pmksa_cache.obj \
+ $(OBJDIR)\eapol_supp_sm.obj \
+ $(OBJDIR)\eap.obj \
+ $(OBJDIR)\eap_common.obj \
+ $(OBJDIR)\chap.obj \
+ $(OBJDIR)\eap_methods.obj \
+ $(OBJDIR)\eap_md5.obj \
+ $(OBJDIR)\eap_tls.obj \
+ $(OBJDIR)\eap_tls_common.obj \
+ $(OBJDIR)\eap_mschapv2.obj \
+ $(OBJDIR)\mschapv2.obj \
+ $(OBJDIR)\eap_peap.obj \
+ $(OBJDIR)\eap_peap_common.obj \
+ $(OBJDIR)\eap_ttls.obj \
+ $(OBJDIR)\eap_gtc.obj \
+ $(OBJDIR)\eap_otp.obj \
+ $(OBJDIR)\eap_leap.obj \
+ $(OBJDIR)\eap_sim.obj \
+ $(OBJDIR)\eap_sim_common.obj \
+ $(OBJDIR)\eap_aka.obj \
+ $(OBJDIR)\eap_pax.obj \
+ $(OBJDIR)\eap_pax_common.obj \
+ $(OBJDIR)\eap_psk.obj \
+ $(OBJDIR)\eap_psk_common.obj \
+ $(OBJDIR)\eap_tnc.obj \
+ $(OBJDIR)\tncc.obj \
+ $(OBJDIR)\base64.obj \
+ $(OBJDIR)\ctrl_iface.obj \
+ $(OBJDIR)\ctrl_iface_named_pipe.obj \
+ $(OBJDIR)\driver_ndis.obj \
+ $(OBJDIR)\driver_ndis_.obj \
+ $(OBJDIR)\scan_helpers.obj \
+ $(OBJDIR)\events.obj \
+ $(OBJDIR)\bssid_ignore.obj \
+ $(OBJDIR)\scan.obj \
+ $(OBJDIR)\wpas_glue.obj \
+ $(OBJDIR)\eap_register.obj \
+ $(OBJDIR)\config.obj \
+ $(OBJDIR)\l2_packet_winpcap.obj \
+ $(OBJDIR)\tls_openssl.obj \
+ $(OBJDIR)\ms_funcs.obj \
+ $(OBJDIR)\crypto_openssl.obj \
+ $(OBJDIR)\fips_prf_openssl.obj \
+ $(OBJDIR)\pcsc_funcs.obj \
+ $(OBJDIR)\notify.obj \
+ $(OBJDIR)\ndis_events.obj
+
+# OBJS = $(OBJS) $(OBJDIR)\eap_fast.obj
+
+OBJS_t = $(OBJS) \
+ $(OBJDIR)\eapol_test.obj \
+ $(OBJDIR)\radius.obj \
+ $(OBJDIR)\radius_client.obj \
+ $(OBJDIR)\config_file.obj $(OBJDIR)\base64.obj
+
+OBJS_t2 = $(OBJS) \
+ $(OBJDIR)\preauth_test.obj \
+ $(OBJDIR)\config_file.obj $(OBJDIR)\base64.obj
+
+OBJS2 = $(OBJDIR)\drivers.obj \
+ $(OBJDIR)\config_file.obj \
+ $(OBJS2) $(OBJDIR)\main.obj
+
+OBJS3 = $(OBJDIR)\drivers.obj \
+ $(OBJDIR)\config_winreg.obj \
+ $(OBJS3) $(OBJDIR)\main_winsvc.obj
+
+OBJS_c = \
+ $(OBJDIR)\os_win32.obj \
+ $(OBJDIR)\wpa_cli.obj \
+ $(OBJDIR)\wpa_ctrl.obj \
+ $(OBJDIR)\common.obj
+
+OBJS_p = \
+ $(OBJDIR)\os_win32.obj \
+ $(OBJDIR)\common.obj \
+ $(OBJDIR)\wpa_debug.obj \
+ $(OBJDIR)\wpabuf.obj \
+ $(OBJDIR)\sha1.obj \
+ $(OBJDIR)\md5.obj \
+ $(OBJDIR)\crypto_openssl.obj \
+ $(OBJDIR)\sha1-pbkdf2.obj \
+ $(OBJDIR)\wpa_passphrase.obj
+
+LIBS = wbemuuid.lib libcmt.lib kernel32.lib uuid.lib ole32.lib oleaut32.lib \
+ ws2_32.lib Advapi32.lib Crypt32.lib Winscard.lib \
+ Packet.lib wpcap.lib \
+ libeay32.lib ssleay32.lib
+# If using Win32 OpenSSL binary installation from Shining Light Productions,
+# replace the last line with this for dynamic libraries
+# libeay32MT.lib ssleay32MT.lib
+# and this for static libraries
+# libeay32MT.lib ssleay32MT.lib Gdi32.lib User32.lib
+
+CFLAGS = $(CFLAGS) /I"$(WINPCAPDIR)/Include" /I"$(OPENSSLDIR)\include"
+LFLAGS = /libpath:"$(WINPCAPDIR)\Lib" /libpath:"$(OPENSSLDIR)\lib"
+
+wpa_supplicant.exe: $(OBJDIR) $(OBJS) $(OBJS2)
+ link.exe /out:wpa_supplicant.exe $(LFLAGS) $(OBJS) $(OBJS2) $(LIBS)
+
+wpasvc.exe: $(OBJDIR) $(OBJS) $(OBJS3)
+ link.exe /out:wpasvc.exe $(LFLAGS) $(OBJS) $(OBJS3) $(LIBS)
+
+wpa_cli.exe: $(OBJDIR) $(OBJS_c)
+ link.exe /out:wpa_cli.exe $(LFLAGS) $(OBJS_c) $(LIBS)
+
+wpa_passphrase.exe: $(OBJDIR) $(OBJS_p)
+ link.exe /out:wpa_passphrase.exe $(LFLAGS) $(OBJS_p) $(LIBS)
+
+eapol_test.exe: $(OBJDIR) $(OBJS_t)
+ link.exe /out:eapol_test.exe $(LFLAGS) $(OBJS_t) $(LIBS)
+
+preauth_test.exe: $(OBJDIR) $(OBJS_t2)
+ link.exe /out:preauth_test.exe $(LFLAGS) $(OBJS_t2) $(LIBS)
+
+win_if_list.exe: $(OBJDIR) $(OBJDIR)\win_if_list.obj
+ link.exe /out:win_if_list.exe $(LFLAGS) $(OBJDIR)\win_if_list.obj $(LIBS)
+
+
+{..\src\utils}.c{$(OBJDIR)}.obj::
+ $(CC) $(CFLAGS) $<
+
+{..\src\common}.c{$(OBJDIR)}.obj::
+ $(CC) $(CFLAGS) $<
+
+{..\src\rsn_supp}.c{$(OBJDIR)}.obj::
+ $(CC) $(CFLAGS) $<
+
+{..\src\eapol_supp}.c{$(OBJDIR)}.obj::
+ $(CC) $(CFLAGS) $<
+
+{..\src\crypto}.c{$(OBJDIR)}.obj::
+ $(CC) $(CFLAGS) $<
+
+{..\src\eap_peer}.c{$(OBJDIR)}.obj::
+ $(CC) $(CFLAGS) $<
+
+{..\src\eap_common}.c{$(OBJDIR)}.obj::
+ $(CC) $(CFLAGS) $<
+
+{..\src\drivers}.c{$(OBJDIR)}.obj::
+ $(CC) $(CFLAGS) $<
+
+{..\src\l2_packet}.c{$(OBJDIR)}.obj::
+ $(CC) $(CFLAGS) $<
+
+{.\}.c{$(OBJDIR)}.obj::
+ $(CC) $(CFLAGS) $<
+
+{.\}.cpp{$(OBJDIR)}.obj::
+ $(CC) $(CFLAGS) $<
+
+$(OBJDIR):
+ if not exist "$(OBJDIR)" mkdir "$(OBJDIR)"
+
+clean:
+ erase $(OBJDIR)\*.obj wpa_supplicant.exe
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/notify.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/notify.h
new file mode 100755
index 0000000..c46e798
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/notify.h
@@ -0,0 +1,167 @@
+/*
+ * wpa_supplicant - Event notifications
+ * Copyright (c) 2009-2010, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef NOTIFY_H
+#define NOTIFY_H
+
+#include "p2p/p2p.h"
+
+struct wps_credential;
+struct wps_event_m2d;
+struct wps_event_fail;
+struct tls_cert_data;
+struct wpa_cred;
+
+int wpas_notify_supplicant_initialized(struct wpa_global *global);
+void wpas_notify_supplicant_deinitialized(struct wpa_global *global);
+int wpas_notify_iface_added(struct wpa_supplicant *wpa_s);
+void wpas_notify_iface_removed(struct wpa_supplicant *wpa_s);
+void wpas_notify_state_changed(struct wpa_supplicant *wpa_s,
+ enum wpa_states new_state,
+ enum wpa_states old_state);
+void wpas_notify_disconnect_reason(struct wpa_supplicant *wpa_s);
+void wpas_notify_auth_status_code(struct wpa_supplicant *wpa_s);
+void wpas_notify_assoc_status_code(struct wpa_supplicant *wpa_s);
+void wpas_notify_roam_time(struct wpa_supplicant *wpa_s);
+void wpas_notify_roam_complete(struct wpa_supplicant *wpa_s);
+void wpas_notify_session_length(struct wpa_supplicant *wpa_s);
+void wpas_notify_bss_tm_status(struct wpa_supplicant *wpa_s);
+void wpas_notify_network_changed(struct wpa_supplicant *wpa_s);
+void wpas_notify_ap_scan_changed(struct wpa_supplicant *wpa_s);
+void wpas_notify_bssid_changed(struct wpa_supplicant *wpa_s);
+void wpas_notify_auth_changed(struct wpa_supplicant *wpa_s);
+void wpas_notify_network_enabled_changed(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void wpas_notify_network_selected(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void wpas_notify_network_request(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid,
+ enum wpa_ctrl_req_type rtype,
+ const char *default_txt);
+void wpas_notify_scanning(struct wpa_supplicant *wpa_s);
+void wpas_notify_scan_done(struct wpa_supplicant *wpa_s, int success);
+void wpas_notify_scan_results(struct wpa_supplicant *wpa_s);
+void wpas_notify_wps_credential(struct wpa_supplicant *wpa_s,
+ const struct wps_credential *cred);
+void wpas_notify_wps_event_m2d(struct wpa_supplicant *wpa_s,
+ struct wps_event_m2d *m2d);
+void wpas_notify_wps_event_fail(struct wpa_supplicant *wpa_s,
+ struct wps_event_fail *fail);
+void wpas_notify_wps_event_success(struct wpa_supplicant *wpa_s);
+void wpas_notify_wps_event_pbc_overlap(struct wpa_supplicant *wpa_s);
+void wpas_notify_network_added(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void wpas_notify_network_removed(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void wpas_notify_bss_added(struct wpa_supplicant *wpa_s, u8 bssid[],
+ unsigned int id);
+void wpas_notify_bss_removed(struct wpa_supplicant *wpa_s, u8 bssid[],
+ unsigned int id);
+void wpas_notify_bss_freq_changed(struct wpa_supplicant *wpa_s,
+ unsigned int id);
+void wpas_notify_bss_signal_changed(struct wpa_supplicant *wpa_s,
+ unsigned int id);
+void wpas_notify_bss_privacy_changed(struct wpa_supplicant *wpa_s,
+ unsigned int id);
+void wpas_notify_bss_mode_changed(struct wpa_supplicant *wpa_s,
+ unsigned int id);
+void wpas_notify_bss_wpaie_changed(struct wpa_supplicant *wpa_s,
+ unsigned int id);
+void wpas_notify_bss_rsnie_changed(struct wpa_supplicant *wpa_s,
+ unsigned int id);
+void wpas_notify_bss_wps_changed(struct wpa_supplicant *wpa_s,
+ unsigned int id);
+void wpas_notify_bss_ies_changed(struct wpa_supplicant *wpa_s,
+ unsigned int id);
+void wpas_notify_bss_rates_changed(struct wpa_supplicant *wpa_s,
+ unsigned int id);
+void wpas_notify_bss_seen(struct wpa_supplicant *wpa_s, unsigned int id);
+void wpas_notify_blob_added(struct wpa_supplicant *wpa_s, const char *name);
+void wpas_notify_blob_removed(struct wpa_supplicant *wpa_s, const char *name);
+
+void wpas_notify_debug_level_changed(struct wpa_global *global);
+void wpas_notify_debug_timestamp_changed(struct wpa_global *global);
+void wpas_notify_debug_show_keys_changed(struct wpa_global *global);
+void wpas_notify_suspend(struct wpa_global *global);
+void wpas_notify_resume(struct wpa_global *global);
+
+void wpas_notify_sta_authorized(struct wpa_supplicant *wpa_s,
+ const u8 *mac_addr, int authorized,
+ const u8 *p2p_dev_addr);
+void wpas_notify_p2p_find_stopped(struct wpa_supplicant *wpa_s);
+void wpas_notify_p2p_device_found(struct wpa_supplicant *wpa_s,
+ const u8 *dev_addr, int new_device);
+void wpas_notify_p2p_device_lost(struct wpa_supplicant *wpa_s,
+ const u8 *dev_addr);
+void wpas_notify_p2p_group_removed(struct wpa_supplicant *wpa_s,
+ const struct wpa_ssid *ssid,
+ const char *role);
+void wpas_notify_p2p_go_neg_req(struct wpa_supplicant *wpa_s,
+ const u8 *src, u16 dev_passwd_id, u8 go_intent);
+void wpas_notify_p2p_go_neg_completed(struct wpa_supplicant *wpa_s,
+ struct p2p_go_neg_results *res);
+void wpas_notify_p2p_invitation_result(struct wpa_supplicant *wpa_s,
+ int status, const u8 *bssid);
+void wpas_notify_p2p_sd_request(struct wpa_supplicant *wpa_s,
+ int freq, const u8 *sa, u8 dialog_token,
+ u16 update_indic, const u8 *tlvs,
+ size_t tlvs_len);
+void wpas_notify_p2p_sd_response(struct wpa_supplicant *wpa_s,
+ const u8 *sa, u16 update_indic,
+ const u8 *tlvs, size_t tlvs_len);
+void wpas_notify_p2p_provision_discovery(struct wpa_supplicant *wpa_s,
+ const u8 *dev_addr, int request,
+ enum p2p_prov_disc_status status,
+ u16 config_methods,
+ unsigned int generated_pin);
+void wpas_notify_p2p_group_started(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid, int persistent,
+ int client, const u8 *ip);
+void wpas_notify_p2p_group_formation_failure(struct wpa_supplicant *wpa_s,
+ const char *reason);
+void wpas_notify_persistent_group_added(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void wpas_notify_persistent_group_removed(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+
+void wpas_notify_p2p_wps_failed(struct wpa_supplicant *wpa_s,
+ struct wps_event_fail *fail);
+
+void wpas_notify_certification(struct wpa_supplicant *wpa_s,
+ struct tls_cert_data *cert,
+ const char *cert_hash);
+void wpas_notify_preq(struct wpa_supplicant *wpa_s,
+ const u8 *addr, const u8 *dst, const u8 *bssid,
+ const u8 *ie, size_t ie_len, u32 ssi_signal);
+void wpas_notify_eap_status(struct wpa_supplicant *wpa_s, const char *status,
+ const char *parameter);
+void wpas_notify_eap_error(struct wpa_supplicant *wpa_s, int error_code);
+void wpas_notify_network_bssid_set_changed(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void wpas_notify_network_type_changed(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void wpas_notify_p2p_invitation_received(struct wpa_supplicant *wpa_s,
+ const u8 *sa, const u8 *go_dev_addr,
+ const u8 *bssid, int id, int op_freq);
+void wpas_notify_mesh_group_started(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void wpas_notify_mesh_group_removed(struct wpa_supplicant *wpa_s,
+ const u8 *meshid, u8 meshid_len,
+ u16 reason_code);
+void wpas_notify_mesh_peer_connected(struct wpa_supplicant *wpa_s,
+ const u8 *peer_addr);
+void wpas_notify_mesh_peer_disconnected(struct wpa_supplicant *wpa_s,
+ const u8 *peer_addr, u16 reason_code);
+void wpas_notify_interworking_ap_added(struct wpa_supplicant *wpa_s,
+ struct wpa_bss *bss,
+ struct wpa_cred *cred, int excluded,
+ const char *type, int bh, int bss_load,
+ int conn_capab);
+void wpas_notify_interworking_select_done(struct wpa_supplicant *wpa_s);
+
+#endif /* NOTIFY_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/offchannel.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/offchannel.h
new file mode 100755
index 0000000..0ad7e18
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/offchannel.h
@@ -0,0 +1,35 @@
+/*
+ * wpa_supplicant - Off-channel Action frame TX/RX
+ * Copyright (c) 2009-2010, Atheros Communications
+ * Copyright (c) 2011, Qualcomm Atheros
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef OFFCHANNEL_H
+#define OFFCHANNEL_H
+
+int offchannel_send_action(struct wpa_supplicant *wpa_s, unsigned int freq,
+ const u8 *dst, const u8 *src, const u8 *bssid,
+ const u8 *buf, size_t len, unsigned int wait_time,
+ void (*tx_cb)(struct wpa_supplicant *wpa_s,
+ unsigned int freq, const u8 *dst,
+ const u8 *src, const u8 *bssid,
+ const u8 *data, size_t data_len,
+ enum offchannel_send_action_result
+ result),
+ int no_cck);
+void offchannel_send_action_done(struct wpa_supplicant *wpa_s);
+void offchannel_remain_on_channel_cb(struct wpa_supplicant *wpa_s,
+ unsigned int freq, unsigned int duration);
+void offchannel_cancel_remain_on_channel_cb(struct wpa_supplicant *wpa_s,
+ unsigned int freq);
+void offchannel_deinit(struct wpa_supplicant *wpa_s);
+void offchannel_send_action_tx_status(
+ struct wpa_supplicant *wpa_s, const u8 *dst, const u8 *data,
+ size_t data_len, enum offchannel_send_action_result result);
+const void * offchannel_pending_action_tx(struct wpa_supplicant *wpa_s);
+void offchannel_clear_pending_action_tx(struct wpa_supplicant *wpa_s);
+
+#endif /* OFFCHANNEL_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/p2p_supplicant.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/p2p_supplicant.h
new file mode 100755
index 0000000..5a869e7
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/p2p_supplicant.h
@@ -0,0 +1,357 @@
+/*
+ * wpa_supplicant - P2P
+ * Copyright (c) 2009-2010, Atheros Communications
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef P2P_SUPPLICANT_H
+#define P2P_SUPPLICANT_H
+
+enum p2p_wps_method;
+struct p2p_go_neg_results;
+enum p2p_send_action_result;
+struct p2p_peer_info;
+struct p2p_channels;
+struct wps_event_fail;
+struct p2ps_provision;
+
+enum wpas_p2p_channel_update_trig {
+ WPAS_P2P_CHANNEL_UPDATE_ANY,
+ WPAS_P2P_CHANNEL_UPDATE_DRIVER,
+ WPAS_P2P_CHANNEL_UPDATE_STATE_CHANGE,
+ WPAS_P2P_CHANNEL_UPDATE_AVOID,
+ WPAS_P2P_CHANNEL_UPDATE_DISALLOW,
+ WPAS_P2P_CHANNEL_UPDATE_CS,
+};
+
+int wpas_p2p_add_p2pdev_interface(struct wpa_supplicant *wpa_s,
+ const char *conf_p2p_dev);
+struct wpa_supplicant * wpas_get_p2p_go_iface(struct wpa_supplicant *wpa_s,
+ const u8 *ssid, size_t ssid_len);
+struct wpa_supplicant * wpas_get_p2p_client_iface(struct wpa_supplicant *wpa_s,
+ const u8 *peer_dev_addr);
+int wpas_p2p_connect(struct wpa_supplicant *wpa_s, const u8 *peer_addr,
+ const char *pin, enum p2p_wps_method wps_method,
+ int persistent_group, int auto_join, int join, int auth,
+ int go_intent, int freq, unsigned int vht_center_freq2,
+ int persistent_id, int pd, int ht40, int vht,
+ unsigned int vht_chwidth, int he, int edmg,
+ const u8 *group_ssid, size_t group_ssid_len,
+ bool allow_6ghz);
+int wpas_p2p_handle_frequency_conflicts(struct wpa_supplicant *wpa_s,
+ int freq, struct wpa_ssid *ssid);
+int wpas_p2p_group_add(struct wpa_supplicant *wpa_s, int persistent_group,
+ int freq, int vht_center_freq2, int ht40, int vht,
+ int max_oper_chwidth, int he, int edmg, bool allow_6ghz);
+int wpas_p2p_group_add_persistent(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid, int addr_allocated,
+ int force_freq, int neg_freq,
+ int vht_center_freq2, int ht40, int vht,
+ int max_oper_chwidth, int he, int edmg,
+ const struct p2p_channels *channels,
+ int connection_timeout, int force_scan,
+ bool allow_6ghz);
+struct p2p_group * wpas_p2p_group_init(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+enum wpas_p2p_prov_disc_use {
+ WPAS_P2P_PD_FOR_GO_NEG,
+ WPAS_P2P_PD_FOR_JOIN,
+ WPAS_P2P_PD_AUTO,
+ WPAS_P2P_PD_FOR_ASP
+};
+int wpas_p2p_prov_disc(struct wpa_supplicant *wpa_s, const u8 *peer_addr,
+ const char *config_method,
+ enum wpas_p2p_prov_disc_use use,
+ struct p2ps_provision *p2ps_prov);
+void wpas_send_action_tx_status(struct wpa_supplicant *wpa_s, const u8 *dst,
+ const u8 *data, size_t data_len,
+ enum p2p_send_action_result result);
+int wpas_p2p_scan_result_text(const u8 *ies, size_t ies_len, char *buf,
+ char *end);
+enum p2p_discovery_type;
+int wpas_p2p_find(struct wpa_supplicant *wpa_s, unsigned int timeout,
+ enum p2p_discovery_type type,
+ unsigned int num_req_dev_types, const u8 *req_dev_types,
+ const u8 *dev_id, unsigned int search_delay,
+ u8 seek_cnt, const char **seek_string, int freq,
+ bool include_6ghz);
+void wpas_p2p_stop_find(struct wpa_supplicant *wpa_s);
+int wpas_p2p_listen(struct wpa_supplicant *wpa_s, unsigned int timeout);
+int wpas_p2p_listen_start(struct wpa_supplicant *wpa_s, unsigned int timeout);
+int wpas_p2p_assoc_req_ie(struct wpa_supplicant *wpa_s, struct wpa_bss *bss,
+ u8 *buf, size_t len, int p2p_group);
+void wpas_p2p_scan_ie(struct wpa_supplicant *wpa_s, struct wpabuf *ies);
+u64 wpas_p2p_sd_request(struct wpa_supplicant *wpa_s, const u8 *dst,
+ const struct wpabuf *tlvs);
+u64 wpas_p2p_sd_request_asp(struct wpa_supplicant *wpa_s, const u8 *dst, u8 id,
+ const char *svc_str, const char *info_substr);
+u64 wpas_p2p_sd_request_upnp(struct wpa_supplicant *wpa_s, const u8 *dst,
+ u8 version, const char *query);
+u64 wpas_p2p_sd_request_wifi_display(struct wpa_supplicant *wpa_s,
+ const u8 *dst, const char *role);
+int wpas_p2p_sd_cancel_request(struct wpa_supplicant *wpa_s, u64 req);
+void wpas_p2p_sd_response(struct wpa_supplicant *wpa_s, int freq,
+ const u8 *dst, u8 dialog_token,
+ const struct wpabuf *resp_tlvs);
+void wpas_p2p_sd_service_update(struct wpa_supplicant *wpa_s);
+void wpas_p2p_service_flush(struct wpa_supplicant *wpa_s);
+int wpas_p2p_service_add_bonjour(struct wpa_supplicant *wpa_s,
+ struct wpabuf *query, struct wpabuf *resp);
+int wpas_p2p_service_del_bonjour(struct wpa_supplicant *wpa_s,
+ const struct wpabuf *query);
+int wpas_p2p_service_add_upnp(struct wpa_supplicant *wpa_s, u8 version,
+ const char *service);
+int wpas_p2p_service_del_upnp(struct wpa_supplicant *wpa_s, u8 version,
+ const char *service);
+int wpas_p2p_service_add_asp(struct wpa_supplicant *wpa_s, int auto_accept,
+ u32 adv_id, const char *adv_str, u8 svc_state,
+ u16 config_methods, const char *svc_info,
+ const u8 *cpt_priority);
+int wpas_p2p_service_del_asp(struct wpa_supplicant *wpa_s, u32 adv_id);
+void wpas_p2p_service_flush_asp(struct wpa_supplicant *wpa_s);
+int wpas_p2p_service_p2ps_id_exists(struct wpa_supplicant *wpa_s, u32 adv_id);
+void wpas_sd_request(void *ctx, int freq, const u8 *sa, u8 dialog_token,
+ u16 update_indic, const u8 *tlvs, size_t tlvs_len);
+void wpas_sd_response(void *ctx, const u8 *sa, u16 update_indic,
+ const u8 *tlvs, size_t tlvs_len);
+int wpas_p2p_reject(struct wpa_supplicant *wpa_s, const u8 *addr);
+int wpas_p2p_invite(struct wpa_supplicant *wpa_s, const u8 *peer_addr,
+ struct wpa_ssid *ssid, const u8 *go_dev_addr, int freq,
+ int vht_center_freq2, int ht40, int vht, int max_chwidth,
+ int pref_freq, int he, int edmg, bool allow_6ghz);
+int wpas_p2p_invite_group(struct wpa_supplicant *wpa_s, const char *ifname,
+ const u8 *peer_addr, const u8 *go_dev_addr,
+ bool allow_6ghz);
+int wpas_p2p_presence_req(struct wpa_supplicant *wpa_s, u32 duration1,
+ u32 interval1, u32 duration2, u32 interval2);
+int wpas_p2p_ext_listen(struct wpa_supplicant *wpa_s, unsigned int period,
+ unsigned int interval);
+int wpas_p2p_deauth_notif(struct wpa_supplicant *wpa_s, const u8 *bssid,
+ u16 reason_code, const u8 *ie, size_t ie_len,
+ int locally_generated);
+void wpas_p2p_disassoc_notif(struct wpa_supplicant *wpa_s, const u8 *bssid,
+ u16 reason_code, const u8 *ie, size_t ie_len,
+ int locally_generated);
+int wpas_p2p_set_noa(struct wpa_supplicant *wpa_s, u8 count, int start,
+ int duration);
+int wpas_p2p_set_cross_connect(struct wpa_supplicant *wpa_s, int enabled);
+int wpas_p2p_cancel(struct wpa_supplicant *wpa_s);
+int wpas_p2p_unauthorize(struct wpa_supplicant *wpa_s, const char *addr);
+int wpas_p2p_disconnect(struct wpa_supplicant *wpa_s);
+struct wpa_ssid * wpas_p2p_get_persistent(struct wpa_supplicant *wpa_s,
+ const u8 *addr, const u8 *ssid,
+ size_t ssid_len);
+void wpas_p2p_notify_ap_sta_authorized(struct wpa_supplicant *wpa_s,
+ const u8 *addr);
+int wpas_p2p_scan_no_go_seen(struct wpa_supplicant *wpa_s);
+int wpas_p2p_get_sec_channel_offset_40mhz(struct wpa_supplicant *wpa_s,
+ struct hostapd_hw_modes *mode,
+ u8 channel);
+int wpas_p2p_get_vht80_center(struct wpa_supplicant *wpa_s,
+ struct hostapd_hw_modes *mode, u8 channel,
+ u8 op_class);
+int wpas_p2p_get_vht160_center(struct wpa_supplicant *wpa_s,
+ struct hostapd_hw_modes *mode, u8 channel,
+ u8 op_class);
+unsigned int wpas_p2p_search_delay(struct wpa_supplicant *wpa_s);
+void wpas_p2p_new_psk_cb(struct wpa_supplicant *wpa_s, const u8 *mac_addr,
+ const u8 *p2p_dev_addr,
+ const u8 *psk, size_t psk_len);
+void wpas_p2p_remove_client(struct wpa_supplicant *wpa_s, const u8 *peer,
+ int iface_addr);
+struct wpabuf * wpas_p2p_nfc_handover_req(struct wpa_supplicant *wpa_s,
+ int ndef);
+struct wpabuf * wpas_p2p_nfc_handover_sel(struct wpa_supplicant *wpa_s,
+ int ndef, int tag);
+int wpas_p2p_nfc_tag_process(struct wpa_supplicant *wpa_s,
+ const struct wpabuf *data, int forced_freq);
+int wpas_p2p_nfc_report_handover(struct wpa_supplicant *wpa_s, int init,
+ const struct wpabuf *req,
+ const struct wpabuf *sel, int forced_freq);
+int wpas_p2p_nfc_tag_enabled(struct wpa_supplicant *wpa_s, int enabled);
+void wpas_p2p_pbc_overlap_cb(void *eloop_ctx, void *timeout_ctx);
+int wpas_p2p_try_edmg_channel(struct wpa_supplicant *wpa_s,
+ struct p2p_go_neg_results *params);
+
+#ifdef CONFIG_P2P
+
+int wpas_p2p_init(struct wpa_global *global, struct wpa_supplicant *wpa_s);
+void wpas_p2p_deinit(struct wpa_supplicant *wpa_s);
+void wpas_p2p_completed(struct wpa_supplicant *wpa_s);
+void wpas_p2p_update_config(struct wpa_supplicant *wpa_s);
+int wpas_p2p_probe_req_rx(struct wpa_supplicant *wpa_s, const u8 *addr,
+ const u8 *dst, const u8 *bssid,
+ const u8 *ie, size_t ie_len,
+ unsigned int rx_freq, int ssi_signal);
+void wpas_p2p_wps_success(struct wpa_supplicant *wpa_s, const u8 *peer_addr,
+ int registrar);
+
+void wpas_p2p_update_channel_list(struct wpa_supplicant *wpa_s,
+ enum wpas_p2p_channel_update_trig trig);
+
+void wpas_p2p_update_best_channels(struct wpa_supplicant *wpa_s,
+ int freq_24, int freq_5, int freq_overall);
+void wpas_p2p_rx_action(struct wpa_supplicant *wpa_s, const u8 *da,
+ const u8 *sa, const u8 *bssid,
+ u8 category, const u8 *data, size_t len, int freq);
+void wpas_p2p_remain_on_channel_cb(struct wpa_supplicant *wpa_s,
+ unsigned int freq, unsigned int duration);
+void wpas_p2p_cancel_remain_on_channel_cb(struct wpa_supplicant *wpa_s,
+ unsigned int freq);
+void wpas_p2p_interface_unavailable(struct wpa_supplicant *wpa_s);
+void wpas_p2p_notif_connected(struct wpa_supplicant *wpa_s);
+void wpas_p2p_notif_disconnected(struct wpa_supplicant *wpa_s);
+int wpas_p2p_notif_pbc_overlap(struct wpa_supplicant *wpa_s);
+int wpas_p2p_4way_hs_failed(struct wpa_supplicant *wpa_s);
+void wpas_p2p_ap_setup_failed(struct wpa_supplicant *wpa_s);
+void wpas_p2p_indicate_state_change(struct wpa_supplicant *wpa_s);
+void wpas_p2p_deinit_iface(struct wpa_supplicant *wpa_s);
+void wpas_p2p_ap_deinit(struct wpa_supplicant *wpa_s);
+void wpas_p2p_network_removed(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+int wpas_p2p_in_progress(struct wpa_supplicant *wpa_s);
+int wpas_p2p_wps_eapol_cb(struct wpa_supplicant *wpa_s);
+void wpas_p2p_wps_failed(struct wpa_supplicant *wpa_s,
+ struct wps_event_fail *fail);
+int wpas_p2p_group_remove(struct wpa_supplicant *wpa_s, const char *ifname);
+int wpas_p2p_lo_start(struct wpa_supplicant *wpa_s, unsigned int freq,
+ unsigned int period, unsigned int interval,
+ unsigned int count);
+int wpas_p2p_lo_stop(struct wpa_supplicant *wpa_s);
+int wpas_p2p_mac_setup(struct wpa_supplicant *wpa_s);
+
+#else /* CONFIG_P2P */
+
+static inline int
+wpas_p2p_init(struct wpa_global *global, struct wpa_supplicant *wpa_s)
+{
+ return 0;
+}
+
+static inline void wpas_p2p_deinit(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline void wpas_p2p_completed(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline void wpas_p2p_update_config(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline int wpas_p2p_probe_req_rx(struct wpa_supplicant *wpa_s,
+ const u8 *addr,
+ const u8 *dst, const u8 *bssid,
+ const u8 *ie, size_t ie_len,
+ unsigned int rx_freq, int ssi_signal)
+{
+ return 0;
+}
+
+static inline void wpas_p2p_wps_success(struct wpa_supplicant *wpa_s,
+ const u8 *peer_addr, int registrar)
+{
+}
+
+static inline void
+wpas_p2p_update_channel_list(struct wpa_supplicant *wpa_s,
+ enum wpas_p2p_channel_update_trig trig)
+{
+}
+
+static inline void wpas_p2p_update_best_channels(struct wpa_supplicant *wpa_s,
+ int freq_24, int freq_5,
+ int freq_overall)
+{
+}
+
+static inline void wpas_p2p_rx_action(struct wpa_supplicant *wpa_s,
+ const u8 *da,
+ const u8 *sa, const u8 *bssid,
+ u8 category, const u8 *data, size_t len,
+ int freq)
+{
+}
+
+static inline void wpas_p2p_remain_on_channel_cb(struct wpa_supplicant *wpa_s,
+ unsigned int freq,
+ unsigned int duration)
+{
+}
+
+static inline void
+wpas_p2p_cancel_remain_on_channel_cb(struct wpa_supplicant *wpa_s,
+ unsigned int freq)
+{
+}
+
+static inline void wpas_p2p_interface_unavailable(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline void wpas_p2p_notif_connected(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline void wpas_p2p_notif_disconnected(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline int wpas_p2p_notif_pbc_overlap(struct wpa_supplicant *wpa_s)
+{
+ return 0;
+}
+
+static inline int wpas_p2p_4way_hs_failed(struct wpa_supplicant *wpa_s)
+{
+ return 0;
+}
+
+static inline void wpas_p2p_ap_setup_failed(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline void wpas_p2p_indicate_state_change(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline void wpas_p2p_deinit_iface(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline void wpas_p2p_ap_deinit(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline void wpas_p2p_network_removed(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid)
+{
+}
+
+static inline int wpas_p2p_in_progress(struct wpa_supplicant *wpa_s)
+{
+ return 0;
+}
+
+static inline int wpas_p2p_wps_eapol_cb(struct wpa_supplicant *wpa_s)
+{
+ return 0;
+}
+
+static inline void wpas_p2p_wps_failed(struct wpa_supplicant *wpa_s,
+ struct wps_event_fail *fail)
+{
+}
+
+static inline int wpas_p2p_group_remove(struct wpa_supplicant *wpa_s,
+ const char *ifname)
+{
+ return 0;
+}
+
+#endif /* CONFIG_P2P */
+
+#endif /* P2P_SUPPLICANT_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/scan.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/scan.h
new file mode 100755
index 0000000..d1780eb
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/scan.h
@@ -0,0 +1,96 @@
+/*
+ * WPA Supplicant - Scanning
+ * Copyright (c) 2003-2014, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef SCAN_H
+#define SCAN_H
+
+/*
+ * Noise floor values to use when we have signal strength
+ * measurements, but no noise floor measurements. These values were
+ * measured in an office environment with many APs.
+ */
+#define DEFAULT_NOISE_FLOOR_2GHZ (-89)
+#define DEFAULT_NOISE_FLOOR_5GHZ (-92)
+#define DEFAULT_NOISE_FLOOR_6GHZ (-92)
+
+/*
+ * Channels with a great SNR can operate at full rate. What is a great SNR?
+ * This doc https://supportforums.cisco.com/docs/DOC-12954 says, "the general
+ * rule of thumb is that any SNR above 20 is good." This one
+ * http://www.cisco.com/en/US/tech/tk722/tk809/technologies_q_and_a_item09186a00805e9a96.shtml#qa23
+ * recommends 25 as a minimum SNR for 54 Mbps data rate. The estimates used in
+ * scan_est_throughput() allow even smaller SNR values for the maximum rates
+ * (21 for 54 Mbps, 22 for VHT80 MCS9, 24 for HT40 and HT20 MCS7). Use 25 as a
+ * somewhat conservative value here.
+ */
+#define GREAT_SNR 25
+
+#define IS_2P4GHZ(n) (n >= 2412 && n <= 2484)
+#define IS_5GHZ(n) (n > 4000 && n < 5895)
+
+int wpa_supplicant_enabled_networks(struct wpa_supplicant *wpa_s);
+void wpa_supplicant_req_scan(struct wpa_supplicant *wpa_s, int sec, int usec);
+int wpa_supplicant_delayed_sched_scan(struct wpa_supplicant *wpa_s,
+ int sec, int usec);
+int wpa_supplicant_req_sched_scan(struct wpa_supplicant *wpa_s);
+void wpa_supplicant_cancel_scan(struct wpa_supplicant *wpa_s);
+void wpa_supplicant_cancel_delayed_sched_scan(struct wpa_supplicant *wpa_s);
+void wpa_supplicant_cancel_sched_scan(struct wpa_supplicant *wpa_s);
+void wpa_supplicant_notify_scanning(struct wpa_supplicant *wpa_s,
+ int scanning);
+struct wpa_driver_scan_params;
+int wpa_supplicant_trigger_scan(struct wpa_supplicant *wpa_s,
+ struct wpa_driver_scan_params *params);
+struct wpa_scan_results *
+wpa_supplicant_get_scan_results(struct wpa_supplicant *wpa_s,
+ struct scan_info *info, int new_scan);
+int wpa_supplicant_update_scan_results(struct wpa_supplicant *wpa_s);
+const u8 * wpa_scan_get_ie(const struct wpa_scan_res *res, u8 ie);
+const u8 * wpa_scan_get_vendor_ie(const struct wpa_scan_res *res,
+ u32 vendor_type);
+const u8 * wpa_scan_get_vendor_ie_beacon(const struct wpa_scan_res *res,
+ u32 vendor_type);
+struct wpabuf * wpa_scan_get_vendor_ie_multi(const struct wpa_scan_res *res,
+ u32 vendor_type);
+int wpa_supplicant_filter_bssid_match(struct wpa_supplicant *wpa_s,
+ const u8 *bssid);
+void wpa_supplicant_update_scan_int(struct wpa_supplicant *wpa_s, int sec);
+void scan_only_handler(struct wpa_supplicant *wpa_s,
+ struct wpa_scan_results *scan_res);
+int wpas_scan_scheduled(struct wpa_supplicant *wpa_s);
+struct wpa_driver_scan_params *
+wpa_scan_clone_params(const struct wpa_driver_scan_params *src);
+void wpa_scan_free_params(struct wpa_driver_scan_params *params);
+int wpas_start_pno(struct wpa_supplicant *wpa_s);
+int wpas_stop_pno(struct wpa_supplicant *wpa_s);
+void wpas_scan_reset_sched_scan(struct wpa_supplicant *wpa_s);
+void wpas_scan_restart_sched_scan(struct wpa_supplicant *wpa_s);
+
+void wpas_mac_addr_rand_scan_clear(struct wpa_supplicant *wpa_s,
+ unsigned int type);
+int wpas_mac_addr_rand_scan_set(struct wpa_supplicant *wpa_s,
+ unsigned int type, const u8 *addr,
+ const u8 *mask);
+int wpas_mac_addr_rand_scan_get_mask(struct wpa_supplicant *wpa_s,
+ unsigned int type, u8 *mask);
+int wpas_abort_ongoing_scan(struct wpa_supplicant *wpa_s);
+void filter_scan_res(struct wpa_supplicant *wpa_s,
+ struct wpa_scan_results *res);
+void scan_snr(struct wpa_scan_res *res);
+void scan_est_throughput(struct wpa_supplicant *wpa_s,
+ struct wpa_scan_res *res);
+unsigned int wpas_get_est_tpt(const struct wpa_supplicant *wpa_s,
+ const u8 *ies, size_t ies_len, int rate,
+ int snr, int freq);
+void wpa_supplicant_set_default_scan_ies(struct wpa_supplicant *wpa_s);
+int wpa_add_scan_freqs_list(struct wpa_supplicant *wpa_s,
+ enum hostapd_hw_mode band,
+ struct wpa_driver_scan_params *params,
+ bool is_6ghz);
+
+#endif /* SCAN_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/sme.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/sme.h
new file mode 100755
index 0000000..c797d2e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/sme.h
@@ -0,0 +1,137 @@
+/*
+ * wpa_supplicant - SME
+ * Copyright (c) 2009-2010, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef SME_H
+#define SME_H
+
+#ifdef CONFIG_SME
+
+void sme_authenticate(struct wpa_supplicant *wpa_s,
+ struct wpa_bss *bss, struct wpa_ssid *ssid);
+void sme_associate(struct wpa_supplicant *wpa_s, enum wpas_mode mode,
+ const u8 *bssid, u16 auth_type);
+void sme_event_auth(struct wpa_supplicant *wpa_s, union wpa_event_data *data);
+int sme_update_ft_ies(struct wpa_supplicant *wpa_s, const u8 *md,
+ const u8 *ies, size_t ies_len);
+void sme_event_assoc_reject(struct wpa_supplicant *wpa_s,
+ union wpa_event_data *data);
+void sme_event_auth_timed_out(struct wpa_supplicant *wpa_s,
+ union wpa_event_data *data);
+void sme_event_assoc_timed_out(struct wpa_supplicant *wpa_s,
+ union wpa_event_data *data);
+void sme_event_disassoc(struct wpa_supplicant *wpa_s,
+ struct disassoc_info *info);
+void sme_event_unprot_disconnect(struct wpa_supplicant *wpa_s, const u8 *sa,
+ const u8 *da, u16 reason_code);
+void sme_event_ch_switch(struct wpa_supplicant *wpa_s);
+void sme_sa_query_rx(struct wpa_supplicant *wpa_s, const u8 *da, const u8 *sa,
+ const u8 *data, size_t len);
+void sme_state_changed(struct wpa_supplicant *wpa_s);
+void sme_disassoc_while_authenticating(struct wpa_supplicant *wpa_s,
+ const u8 *prev_pending_bssid);
+void sme_clear_on_disassoc(struct wpa_supplicant *wpa_s);
+void sme_deinit(struct wpa_supplicant *wpa_s);
+
+int sme_proc_obss_scan(struct wpa_supplicant *wpa_s);
+void sme_sched_obss_scan(struct wpa_supplicant *wpa_s, int enable);
+void sme_external_auth_trigger(struct wpa_supplicant *wpa_s,
+ union wpa_event_data *data);
+void sme_external_auth_mgmt_rx(struct wpa_supplicant *wpa_s,
+ const u8 *auth_frame, size_t len);
+
+#else /* CONFIG_SME */
+
+static inline void sme_authenticate(struct wpa_supplicant *wpa_s,
+ struct wpa_bss *bss,
+ struct wpa_ssid *ssid)
+{
+}
+
+static inline void sme_event_auth(struct wpa_supplicant *wpa_s,
+ union wpa_event_data *data)
+{
+}
+
+static inline int sme_update_ft_ies(struct wpa_supplicant *wpa_s, const u8 *md,
+ const u8 *ies, size_t ies_len)
+{
+ return -1;
+}
+
+
+static inline void sme_event_assoc_reject(struct wpa_supplicant *wpa_s,
+ union wpa_event_data *data)
+{
+}
+
+static inline void sme_event_auth_timed_out(struct wpa_supplicant *wpa_s,
+ union wpa_event_data *data)
+{
+}
+
+static inline void sme_event_assoc_timed_out(struct wpa_supplicant *wpa_s,
+ union wpa_event_data *data)
+{
+}
+
+static inline void sme_event_disassoc(struct wpa_supplicant *wpa_s,
+ struct disassoc_info *info)
+{
+}
+
+static inline void sme_event_unprot_disconnect(struct wpa_supplicant *wpa_s,
+ const u8 *sa, const u8 *da,
+ u16 reason_code)
+{
+}
+
+static inline void sme_event_ch_switch(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline void sme_state_changed(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline void
+sme_disassoc_while_authenticating(struct wpa_supplicant *wpa_s,
+ const u8 *prev_pending_bssid)
+{
+}
+
+static inline void sme_clear_on_disassoc(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline void sme_deinit(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline int sme_proc_obss_scan(struct wpa_supplicant *wpa_s)
+{
+ return 0;
+}
+
+static inline void sme_sched_obss_scan(struct wpa_supplicant *wpa_s,
+ int enable)
+{
+}
+
+static inline void sme_external_auth_trigger(struct wpa_supplicant *wpa_s,
+ union wpa_event_data *data)
+{
+}
+
+static inline void sme_external_auth_mgmt_rx(struct wpa_supplicant *wpa_s,
+ const u8 *auth_frame, size_t len)
+{
+}
+
+#endif /* CONFIG_SME */
+
+#endif /* SME_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/systemd/wpa_supplicant-nl80211.service.arg.in b/ap/app/wpa_supplicant-2.10/wpa_supplicant/systemd/wpa_supplicant-nl80211.service.arg.in
new file mode 100755
index 0000000..da69a87
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/systemd/wpa_supplicant-nl80211.service.arg.in
@@ -0,0 +1,15 @@
+[Unit]
+Description=WPA supplicant daemon (interface- and nl80211 driver-specific version)
+Requires=sys-subsystem-net-devices-%i.device
+After=sys-subsystem-net-devices-%i.device
+Before=network.target
+Wants=network.target
+
+# NetworkManager users will probably want the dbus version instead.
+
+[Service]
+Type=simple
+ExecStart=@BINDIR@/wpa_supplicant -c/etc/wpa_supplicant/wpa_supplicant-nl80211-%I.conf -Dnl80211 -i%I
+
+[Install]
+WantedBy=multi-user.target
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/systemd/wpa_supplicant-wired.service.arg.in b/ap/app/wpa_supplicant-2.10/wpa_supplicant/systemd/wpa_supplicant-wired.service.arg.in
new file mode 100755
index 0000000..ca3054b
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/systemd/wpa_supplicant-wired.service.arg.in
@@ -0,0 +1,15 @@
+[Unit]
+Description=WPA supplicant daemon (interface- and wired driver-specific version)
+Requires=sys-subsystem-net-devices-%i.device
+After=sys-subsystem-net-devices-%i.device
+Before=network.target
+Wants=network.target
+
+# NetworkManager users will probably want the dbus version instead.
+
+[Service]
+Type=simple
+ExecStart=@BINDIR@/wpa_supplicant -c/etc/wpa_supplicant/wpa_supplicant-wired-%I.conf -Dwired -i%I
+
+[Install]
+WantedBy=multi-user.target
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/systemd/wpa_supplicant.service.arg.in b/ap/app/wpa_supplicant-2.10/wpa_supplicant/systemd/wpa_supplicant.service.arg.in
new file mode 100755
index 0000000..55d2b9c
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/systemd/wpa_supplicant.service.arg.in
@@ -0,0 +1,15 @@
+[Unit]
+Description=WPA supplicant daemon (interface-specific version)
+Requires=sys-subsystem-net-devices-%i.device
+After=sys-subsystem-net-devices-%i.device
+Before=network.target
+Wants=network.target
+
+# NetworkManager users will probably want the dbus version instead.
+
+[Service]
+Type=simple
+ExecStart=@BINDIR@/wpa_supplicant -c/etc/wpa_supplicant/wpa_supplicant-%I.conf -i%I
+
+[Install]
+WantedBy=multi-user.target
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/systemd/wpa_supplicant.service.in b/ap/app/wpa_supplicant-2.10/wpa_supplicant/systemd/wpa_supplicant.service.in
new file mode 100755
index 0000000..58a6228
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/systemd/wpa_supplicant.service.in
@@ -0,0 +1,14 @@
+[Unit]
+Description=WPA supplicant
+Before=network.target
+After=dbus.service
+Wants=network.target
+
+[Service]
+Type=dbus
+BusName=fi.w1.wpa_supplicant1
+ExecStart=@BINDIR@/wpa_supplicant -u
+
+[Install]
+WantedBy=multi-user.target
+Alias=dbus-fi.w1.wpa_supplicant1.service
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/todo.txt b/ap/app/wpa_supplicant-2.10/wpa_supplicant/todo.txt
new file mode 100755
index 0000000..4c9f98e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/todo.txt
@@ -0,0 +1,78 @@
+To do:
+- add support for WPA with ap_scan=0 (update selected cipher etc. based on
+ AssocInfo; make sure these match with configuration)
+- consider closing smart card / PCSC connection when EAP-SIM/EAP-AKA
+ authentication has been completed (cache scard data based on serial#(?)
+ and try to optimize next connection if the same card is present for next
+ auth)
+- if driver/hw is not WPA2 capable, must remove WPA_PROTO_RSN flag from
+ ssid->proto fields to avoid detecting downgrade attacks when the driver
+ is not reporting RSN IE, but msg 3/4 has one
+- Cisco AP and non-zero keyidx for unicast -> map to broadcast
+ (actually, this already works with driver_ndis; so maybe just change
+ driver_*.c to do the mapping for drivers that cannot handle non-zero keyidx
+ for unicast); worked also with Host AP driver and madwifi
+- IEEE 802.1X and key update with driver_ndis?? wpa_supplicant did not seem
+ to see unencrypted EAPOL-Key frames at all..
+- EAP-PAX with PAX_SEC
+- EAP (RFC 3748)
+ * OTP Extended Responses (Sect. 5.5)
+- test what happens if authenticator sends EAP-Success before real EAP
+ authentication ("canned" Success); this should be ignored based on
+ RFC 3748 Sect. 4.2
+- test compilation with gcc -W options (more warnings?)
+ (Done once; number of unused function arguments still present)
+- ctrl_iface: get/remove blob
+- use doc/docbook/*.sgml and docbook2{txt,html,pdf} to replace README and
+ web pages including the same information.. i.e., have this information only
+ in one page; how to build a PDF file with all the SGML included?
+- EAP-POTP/RSA SecurID profile (RFC 4793)
+- document wpa_gui build and consider adding it to 'make install'
+- consider merging hostapd and wpa_supplicant PMKSA cache implementations
+- consider redesigning pending EAP requests (identity/password/otp from
+ ctrl_iface) by moving the retrying of the previous request into EAP
+ state machine so that EAPOL state machine is not needed for this
+- rfc4284.txt (network selection for eap)
+- www pages about configuring wpa_supplicant:
+ * global options (ap_scan, ctrl_interfaces) based on OS/driver
+ * network block
+ * key_mgmt selection
+ * WPA parameters
+ * EAP options (one page for each method)
+ * "configuration wizard" (step 1: select OS, step 2: select driver, ...) to
+ generate example configuration
+- error path in rsn_preauth_init: should probably deinit l2_packet handlers
+ if something fails; does something else need deinit?
+- consider moving SIM card functionality (IMSI fetching) away from eap.c;
+ this should likely happen before EAP is initialized for authentication;
+ now IMSI is read only after receiving EAP-Identity/Request, but since it is
+ really needed for all cases, reading IMSI and generating Identity string
+ could very well be done before EAP has been started
+- try to work around race in receiving association event and first EAPOL
+ message
+- try to work around race in configuring PTK and sending msg 4/4 (some NDIS
+ drivers with ndiswrapper end up not being able to complete 4-way handshake
+ in some cases; extra delay before setting the key seems to help)
+- make sure that TLS session cache is not shared between EAP types or if it
+ is, that the cache entries are bound to only one EAP type; e.g., cache entry
+ created with EAP-TLS must not be allowed to do fast re-auth with EAP-TTLS
+- consider moving eap_peer_tls_build_ack() call into
+ eap_peer_tls_process_helper()
+ (it seems to be called always if helper returns 1)
+ * could need to modify eap_{ttls,peap,fast}_decrypt to do same
+- add support for fetching full user cert chain from Windows certificate
+ stores even when there are intermediate CA certs that are not in the
+ configured ca_cert store (e.g., ROOT) (they could be, e.g., in CA store)
+- clean up common.[ch]
+- change TLS/crypto library interface to use a structure of function
+ pointers and helper inline functions (like driver_ops) instead of
+ requiring every TLS wrapper to implement all functions
+- add support for encrypted configuration fields (e.g., password, psk,
+ passphrase, pin)
+- wpa_gui: add support for setting and showing priority
+- cleanup TLS/PEAP/TTLS/FAST fragmentation: both the handshake and Appl. Data
+ phases should be able to use the same functions for this;
+ the last step in processing sent should be this code and rest of the code
+ should not need to care about fragmentation at all
+- test EAP-FAST peer with OpenSSL and verify that fallback to full handshake
+ (ServerHello followed by something else than ChangeCipherSpec)
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/utils/log2pcap.py b/ap/app/wpa_supplicant-2.10/wpa_supplicant/utils/log2pcap.py
new file mode 100755
index 0000000..141aecb
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/utils/log2pcap.py
@@ -0,0 +1,54 @@
+#!/usr/bin/env python
+#
+# Copyright (c) 2012, Intel Corporation
+#
+# Author: Johannes Berg <johannes@sipsolutions.net>
+#
+# This software may be distributed under the terms of the BSD license.
+# See README for more details.
+
+import sys, struct, re
+
+def write_pcap_header(pcap_file):
+ pcap_file.write(
+ struct.pack('<IHHIIII',
+ 0xa1b2c3d4, 2, 4, 0, 0, 65535,
+ 105 # raw 802.11 format
+ ))
+
+def pcap_addpacket(pcap_file, ts, data):
+ # ts in seconds, float
+ pcap_file.write(struct.pack('<IIII',
+ int(ts), int(1000000 * ts) % 1000000,
+ len(data), len(data)))
+ pcap_file.write(data)
+
+if __name__ == "__main__":
+ try:
+ input = sys.argv[1]
+ pcap = sys.argv[2]
+ except IndexError:
+ print("Usage: %s <log file> <pcap file>" % sys.argv[0])
+ sys.exit(2)
+
+ input_file = open(input, 'r')
+ pcap_file = open(pcap, 'w')
+ frame_re = re.compile(r'(([0-9]+.[0-9]{6}):\s*)?nl80211: MLME event frame - hexdump\(len=[0-9]*\):((\s*[0-9a-fA-F]{2})*)')
+
+ write_pcap_header(pcap_file)
+
+ for line in input_file:
+ m = frame_re.match(line)
+ if m is None:
+ continue
+ if m.group(2):
+ ts = float(m.group(2))
+ else:
+ ts = 0
+ hexdata = m.group(3)
+ hexdata = hexdata.split()
+ data = ''.join([chr(int(x, 16)) for x in hexdata])
+ pcap_addpacket(pcap_file, ts, data)
+
+ input_file.close()
+ pcap_file.close()
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/vs2005/win_if_list/win_if_list.vcproj b/ap/app/wpa_supplicant-2.10/wpa_supplicant/vs2005/win_if_list/win_if_list.vcproj
new file mode 100755
index 0000000..e79fc0f
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/vs2005/win_if_list/win_if_list.vcproj
@@ -0,0 +1,203 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8.00"
+ Name="win_if_list"
+ ProjectGUID="{9E87CD9C-60CE-4533-85CF-85CA3A9BF26A}"
+ RootNamespace="win_if_list"
+ Keyword="Win32Proj"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="$(SolutionDir)$(ConfigurationName)"
+ IntermediateDirectory="$(ConfigurationName)"
+ ConfigurationType="1"
+ CharacterSet="0"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..\src\utils;C:\dev\WpdPack\include"
+ PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;CONFIG_WIN32_DEFAULTS"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="3"
+ RuntimeLibrary="3"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="4"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="wpcap.lib"
+ LinkIncremental="2"
+ AdditionalLibraryDirectories="C:\dev\WpdPack\lib"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="$(SolutionDir)$(ConfigurationName)"
+ IntermediateDirectory="$(ConfigurationName)"
+ ConfigurationType="1"
+ CharacterSet="0"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories="..\..\..\src\utils;C:\dev\WpdPack\include"
+ PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;CONFIG_WIN32_DEFAULTS"
+ RuntimeLibrary="2"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="wpcap.lib"
+ LinkIncremental="1"
+ AdditionalLibraryDirectories="C:\dev\WpdPack\lib"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx"
+ UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
+ >
+ <File
+ RelativePath="..\..\win_if_list.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc;xsd"
+ UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}"
+ >
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav"
+ UniqueIdentifier="{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}"
+ >
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/vs2005/wpa_supplicant.sln b/ap/app/wpa_supplicant-2.10/wpa_supplicant/vs2005/wpa_supplicant.sln
new file mode 100755
index 0000000..df89e31
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/vs2005/wpa_supplicant.sln
@@ -0,0 +1,52 @@
+
+Microsoft Visual Studio Solution File, Format Version 9.00
+# Visual Studio 2005
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "wpa_supplicant", "wpa_supplicant\wpa_supplicant.vcproj", "{8BCFDA77-AEDC-4168-8897-5B73105BBB87}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "wpa_cli", "wpa_cli\wpa_cli.vcproj", "{E3A7B181-22CC-4DA3-8410-6AD69879A9EC}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "wpasvc", "wpasvc\wpasvc.vcproj", "{E2A4A85F-CA77-406D-8ABF-63EF94545ACC}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "wpa_passphrase", "wpa_passphrase\wpa_passphrase.vcproj", "{ADBE4EA8-F0C5-40C2-AE89-C56D0F2EC1DF}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "win_if_list", "win_if_list\win_if_list.vcproj", "{9E87CD9C-60CE-4533-85CF-85CA3A9BF26A}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "eapol_test", "eapol_test\eapol_test.vcproj", "{0E3F2C6D-1372-48D6-BCAB-E584917C4DE3}"
+EndProject
+Global
+ GlobalSection(DPCodeReviewSolutionGUID) = preSolution
+ DPCodeReviewSolutionGUID = {00000000-0000-0000-0000-000000000000}
+ EndGlobalSection
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|Win32 = Debug|Win32
+ Release|Win32 = Release|Win32
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {8BCFDA77-AEDC-4168-8897-5B73105BBB87}.Debug|Win32.ActiveCfg = Debug|Win32
+ {8BCFDA77-AEDC-4168-8897-5B73105BBB87}.Debug|Win32.Build.0 = Debug|Win32
+ {8BCFDA77-AEDC-4168-8897-5B73105BBB87}.Release|Win32.ActiveCfg = Release|Win32
+ {8BCFDA77-AEDC-4168-8897-5B73105BBB87}.Release|Win32.Build.0 = Release|Win32
+ {E3A7B181-22CC-4DA3-8410-6AD69879A9EC}.Debug|Win32.ActiveCfg = Debug|Win32
+ {E3A7B181-22CC-4DA3-8410-6AD69879A9EC}.Debug|Win32.Build.0 = Debug|Win32
+ {E3A7B181-22CC-4DA3-8410-6AD69879A9EC}.Release|Win32.ActiveCfg = Release|Win32
+ {E3A7B181-22CC-4DA3-8410-6AD69879A9EC}.Release|Win32.Build.0 = Release|Win32
+ {E2A4A85F-CA77-406D-8ABF-63EF94545ACC}.Debug|Win32.ActiveCfg = Debug|Win32
+ {E2A4A85F-CA77-406D-8ABF-63EF94545ACC}.Debug|Win32.Build.0 = Debug|Win32
+ {E2A4A85F-CA77-406D-8ABF-63EF94545ACC}.Release|Win32.ActiveCfg = Release|Win32
+ {E2A4A85F-CA77-406D-8ABF-63EF94545ACC}.Release|Win32.Build.0 = Release|Win32
+ {ADBE4EA8-F0C5-40C2-AE89-C56D0F2EC1DF}.Debug|Win32.ActiveCfg = Debug|Win32
+ {ADBE4EA8-F0C5-40C2-AE89-C56D0F2EC1DF}.Debug|Win32.Build.0 = Debug|Win32
+ {ADBE4EA8-F0C5-40C2-AE89-C56D0F2EC1DF}.Release|Win32.ActiveCfg = Release|Win32
+ {ADBE4EA8-F0C5-40C2-AE89-C56D0F2EC1DF}.Release|Win32.Build.0 = Release|Win32
+ {9E87CD9C-60CE-4533-85CF-85CA3A9BF26A}.Debug|Win32.ActiveCfg = Debug|Win32
+ {9E87CD9C-60CE-4533-85CF-85CA3A9BF26A}.Debug|Win32.Build.0 = Debug|Win32
+ {9E87CD9C-60CE-4533-85CF-85CA3A9BF26A}.Release|Win32.ActiveCfg = Release|Win32
+ {9E87CD9C-60CE-4533-85CF-85CA3A9BF26A}.Release|Win32.Build.0 = Release|Win32
+ {0E3F2C6D-1372-48D6-BCAB-E584917C4DE3}.Debug|Win32.ActiveCfg = Debug|Win32
+ {0E3F2C6D-1372-48D6-BCAB-E584917C4DE3}.Debug|Win32.Build.0 = Debug|Win32
+ {0E3F2C6D-1372-48D6-BCAB-E584917C4DE3}.Release|Win32.ActiveCfg = Release|Win32
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/vs2005/wpasvc/wpasvc.vcproj b/ap/app/wpa_supplicant-2.10/wpa_supplicant/vs2005/wpasvc/wpasvc.vcproj
new file mode 100755
index 0000000..82d9033
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/vs2005/wpasvc/wpasvc.vcproj
@@ -0,0 +1,465 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8.00"
+ Name="wpasvc"
+ ProjectGUID="{E2A4A85F-CA77-406D-8ABF-63EF94545ACC}"
+ RootNamespace="wpasvc"
+ Keyword="Win32Proj"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="$(SolutionDir)$(ConfigurationName)"
+ IntermediateDirectory="$(ConfigurationName)"
+ ConfigurationType="1"
+ CharacterSet="0"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..;..\..\..\src;..\..\..\src\utils;C:\dev\WpdPack\include;C:\dev\openssl\include"
+ PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;CONFIG_WIN32_DEFAULTS"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="3"
+ RuntimeLibrary="3"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="4"
+ DisableSpecificWarnings="4244;4267;4311"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="wbemuuid.lib ws2_32.lib Crypt32.lib Winscard.lib Packet.lib wpcap.lib libeay32MT.lib ssleay32Mt.lib"
+ LinkIncremental="2"
+ AdditionalLibraryDirectories="C:\dev\WpdPack\lib;C:\dev\openssl\lib"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="$(SolutionDir)$(ConfigurationName)"
+ IntermediateDirectory="$(ConfigurationName)"
+ ConfigurationType="1"
+ CharacterSet="0"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories="..\..;..\..\..\src;..\..\..\src\utils;C:\dev\WpdPack\include;C:\dev\openssl\include"
+ PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;CONFIG_WIN32_DEFAULTS"
+ RuntimeLibrary="2"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ DisableSpecificWarnings="4244;4267;4311"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="wbemuuid.lib ws2_32.lib Crypt32.lib Winscard.lib Packet.lib wpcap.lib libeay32MT.lib ssleay32Mt.lib"
+ LinkIncremental="1"
+ AdditionalLibraryDirectories="C:\dev\WpdPack\lib;C:\dev\openssl\lib"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx"
+ UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
+ >
+ <File
+ RelativePath="..\..\..\src\crypto\aes-cbc.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\crypto\aes-ctr.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\crypto\aes-eax.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\crypto\aes-encblock.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\crypto\aes-omac1.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\crypto\aes-unwrap.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\crypto\aes-wrap.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\utils\base64.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\bssid_ignore.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\bss.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_common\chap.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\utils\common.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\utils\config.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\config.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\config_winreg.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\crypto\crypto_openssl.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\ctrl_iface.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\ctrl_iface_named_pipe.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\drivers\driver_common.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\drivers\driver_ndis.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\drivers\driver_ndis_.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\drivers\drivers.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_peer\eap.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_common\eap_common.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_peer\eap_gtc.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_peer\eap_leap.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_peer\eap_md5.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_peer\eap_methods.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_peer\eap_mschapv2.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_peer\eap_otp.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_peer\eap_peap.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_common\eap_peap_common.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\eap_register.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_peer\eap_tls.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_peer\eap_tls_common.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_peer\eap_tnc.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_peer\eap_ttls.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eapol_supp\eapol_supp_sm.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\utils\eloop_win.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\events.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\l2_packet\l2_packet_winpcap.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\main_winsvc.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\crypto\md5.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\crypto\ms_funcs.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_peer\mschapv2.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\drivers\ndis_events.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\notify.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\utils\os_win32.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\utils\pcsc_funcs.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\rsn_supp\peerkey.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\rsn_supp\pmksa_cache.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\rsn_supp\preauth.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\scan.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\crypto\sha1.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\crypto\sha1-pbkdf2.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\crypto\sha1-prf.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\crypto\sha1-tlsprf.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\crypto\tls_openssl.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\eap_peer\tncc.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\rsn_supp\wpa.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\common\wpa_common.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\utils\wpa_debug.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\rsn_supp\wpa_ie.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\wpa_supplicant.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\src\utils\wpabuf.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\wpas_glue.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc;xsd"
+ UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}"
+ >
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav"
+ UniqueIdentifier="{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}"
+ >
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wifi_display.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wifi_display.h
new file mode 100755
index 0000000..0966bdb
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wifi_display.h
@@ -0,0 +1,24 @@
+/*
+ * wpa_supplicant - Wi-Fi Display
+ * Copyright (c) 2011, Atheros Communications, Inc.
+ * Copyright (c) 2011-2012, Qualcomm Atheros, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WIFI_DISPLAY_H
+#define WIFI_DISPLAY_H
+
+int wifi_display_init(struct wpa_global *global);
+void wifi_display_deinit(struct wpa_global *global);
+void wifi_display_enable(struct wpa_global *global, int enabled);
+struct wpabuf *wifi_display_get_wfd_ie(struct wpa_global *global);
+int wifi_display_subelem_set(struct wpa_global *global, char *cmd);
+int wifi_display_subelem_set_from_ies(struct wpa_global *global,
+ struct wpabuf *ie);
+int wifi_display_subelem_get(struct wpa_global *global, char *cmd,
+ char *buf, size_t buflen);
+char * wifi_display_subelem_hex(const struct wpabuf *wfd_subelems, u8 id);
+
+#endif /* WIFI_DISPLAY_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/win_example.reg b/ap/app/wpa_supplicant-2.10/wpa_supplicant/win_example.reg
new file mode 100755
index 0000000..875d4ef
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/win_example.reg
@@ -0,0 +1,42 @@
+REGEDIT4
+
+[HKEY_LOCAL_MACHINE\SOFTWARE\wpa_supplicant]
+"debug_level"=dword:00000000
+"debug_show_keys"=dword:00000001
+"debug_timestamp"=dword:00000000
+"debug_use_file"=dword:00000000
+
+[HKEY_LOCAL_MACHINE\SOFTWARE\wpa_supplicant\configs]
+
+[HKEY_LOCAL_MACHINE\SOFTWARE\wpa_supplicant\configs\test]
+"ap_scan"=dword:00000002
+"update_config"=dword:00000001
+"uuid"="12345678-9abc-def0-1234-56789abcdef0"
+"device_name"="Wireless Client"
+"manufacturer"="Company"
+"model_name"="cmodel"
+"serial_number"="12345"
+"device_type"="1-0050F204-1"
+"os_version"="01020300"
+
+[HKEY_LOCAL_MACHINE\SOFTWARE\wpa_supplicant\configs\test\blobs]
+"testblob"=hex:01,02,03,04,05
+
+[HKEY_LOCAL_MACHINE\SOFTWARE\wpa_supplicant\configs\test\networks]
+
+[HKEY_LOCAL_MACHINE\SOFTWARE\wpa_supplicant\configs\test\networks\0000]
+"ssid"="\"example network\""
+"key_mgmt"="WPA-PSK"
+"psk"="\"secret password\""
+"pairwise"="CCMP"
+"group"="CCMP"
+"proto"="WPA"
+
+[HKEY_LOCAL_MACHINE\SOFTWARE\wpa_supplicant\interfaces]
+
+[HKEY_LOCAL_MACHINE\SOFTWARE\wpa_supplicant\interfaces\0000]
+"adapter"="{A7627643-C310-49E5-BD89-7E77709C04AB}"
+"config"="test"
+"ctrl_interface"=""
+"skip_on_error"=dword:00000000
+
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wmm_ac.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wmm_ac.h
new file mode 100755
index 0000000..0d15ad0
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wmm_ac.h
@@ -0,0 +1,176 @@
+/*
+ * Wi-Fi Multimedia Admission Control (WMM-AC)
+ * Copyright(c) 2014, Intel Mobile Communication GmbH.
+ * Copyright(c) 2014, Intel Corporation. All rights reserved.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WMM_AC_H
+#define WMM_AC_H
+
+#include "common/ieee802_11_defs.h"
+#include "drivers/driver.h"
+
+struct wpa_supplicant;
+
+#define WMM_AC_ACCESS_POLICY_EDCA 1
+#define WMM_AC_FIXED_MSDU_SIZE BIT(15)
+
+#define WMM_AC_MAX_TID 7
+#define WMM_AC_MAX_USER_PRIORITY 7
+#define WMM_AC_MIN_SBA_UNITY 0x2000
+#define WMM_AC_MAX_NOMINAL_MSDU 32767
+
+/**
+ * struct wmm_ac_assoc_data - WMM Admission Control Association Data
+ *
+ * This struct will store any relevant WMM association data needed by WMM AC.
+ * In case there is a valid WMM association, an instance of this struct will be
+ * created. In case there is no instance of this struct, the station is not
+ * associated to a valid WMM BSS and hence, WMM AC will not be used.
+ */
+struct wmm_ac_assoc_data {
+ struct {
+ /*
+ * acm - Admission Control Mandatory
+ * In case an access category is ACM, the traffic will have
+ * to be admitted by WMM-AC's admission mechanism before use.
+ */
+ unsigned int acm:1;
+
+ /*
+ * uapsd_queues - Unscheduled Automatic Power Save Delivery
+ * queues.
+ * Indicates whether ACs are configured for U-APSD (or legacy
+ * PS). Storing this value is necessary in order to set the
+ * Power Save Bit (PSB) in ADDTS request Action frames (if not
+ * given).
+ */
+ unsigned int uapsd:1;
+ } ac_params[WMM_AC_NUM];
+};
+
+/**
+ * wmm_ac_dir - WMM Admission Control Direction
+ */
+enum wmm_ac_dir {
+ WMM_AC_DIR_UPLINK = 0,
+ WMM_AC_DIR_DOWNLINK = 1,
+ WMM_AC_DIR_BIDIRECTIONAL = 3
+};
+
+/**
+ * ts_dir_idx - indices of internally saved tspecs
+ *
+ * we can have multiple tspecs (downlink + uplink) per ac.
+ * save them in array, and use the enum to directly access
+ * the respective tspec slot (according to the direction).
+ */
+enum ts_dir_idx {
+ TS_DIR_IDX_UPLINK,
+ TS_DIR_IDX_DOWNLINK,
+ TS_DIR_IDX_BIDI,
+
+ TS_DIR_IDX_COUNT
+};
+#define TS_DIR_IDX_ALL (BIT(TS_DIR_IDX_COUNT) - 1)
+
+/**
+ * struct wmm_ac_addts_request - ADDTS Request Information
+ *
+ * The last sent ADDTS request(s) will be saved as element(s) of this struct in
+ * order to be compared with the received ADDTS response in ADDTS response
+ * action frame handling and should be stored until that point.
+ * In case a new traffic stream will be created/replaced/updated, only its
+ * relevant traffic stream information will be stored as a wmm_ac_ts struct.
+ */
+struct wmm_ac_addts_request {
+ /*
+ * dialog token - Used to link the received ADDTS response with this
+ * saved ADDTS request when ADDTS response is being handled
+ */
+ u8 dialog_token;
+
+ /*
+ * address - The alleged traffic stream's receiver/transmitter address
+ * Address and TID are used to identify the TS (TID is contained in
+ * TSPEC)
+ */
+ u8 address[ETH_ALEN];
+
+ /*
+ * tspec - Traffic Stream Specification, will be used to compare the
+ * sent TSPEC in ADDTS request to the received TSPEC in ADDTS response
+ * and act accordingly in ADDTS response handling
+ */
+ struct wmm_tspec_element tspec;
+};
+
+
+/**
+ * struct wmm_ac_ts_setup_params - TS setup parameters
+ *
+ * This struct holds parameters which should be provided
+ * to wmm_ac_ts_setup in order to setup a traffic stream
+ */
+struct wmm_ac_ts_setup_params {
+ /*
+ * tsid - Traffic ID
+ * TID and address are used to identify the TS
+ */
+ int tsid;
+
+ /*
+ * direction - Traffic Stream's direction
+ */
+ enum wmm_ac_dir direction;
+
+ /*
+ * user_priority - Traffic Stream's user priority
+ */
+ int user_priority;
+
+ /*
+ * nominal_msdu_size - Nominal MAC service data unit size
+ */
+ int nominal_msdu_size;
+
+ /*
+ * fixed_nominal_msdu - Whether the size is fixed
+ * 0 = Nominal MSDU size is not fixed
+ * 1 = Nominal MSDU size is fixed
+ */
+ int fixed_nominal_msdu;
+
+ /*
+ * surplus_bandwidth_allowance - Specifies excess time allocation
+ */
+ int mean_data_rate;
+
+ /*
+ * minimum_phy_rate - Specifies the minimum supported PHY rate in bps
+ */
+ int minimum_phy_rate;
+
+ /*
+ * surplus_bandwidth_allowance - Specifies excess time allocation
+ */
+ int surplus_bandwidth_allowance;
+};
+
+void wmm_ac_notify_assoc(struct wpa_supplicant *wpa_s, const u8 *ies,
+ size_t ies_len, const struct wmm_params *wmm_params);
+void wmm_ac_notify_disassoc(struct wpa_supplicant *wpa_s);
+int wpas_wmm_ac_addts(struct wpa_supplicant *wpa_s,
+ struct wmm_ac_ts_setup_params *params);
+int wpas_wmm_ac_delts(struct wpa_supplicant *wpa_s, u8 tsid);
+void wmm_ac_rx_action(struct wpa_supplicant *wpa_s, const u8 *da,
+ const u8 *sa, const u8 *data, size_t len);
+int wpas_wmm_ac_status(struct wpa_supplicant *wpa_s, char *buf, size_t buflen);
+void wmm_ac_save_tspecs(struct wpa_supplicant *wpa_s);
+void wmm_ac_clear_saved_tspecs(struct wpa_supplicant *wpa_s);
+int wmm_ac_restore_tspecs(struct wpa_supplicant *wpa_s);
+
+#endif /* WMM_AC_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wnm_sta.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wnm_sta.h
new file mode 100755
index 0000000..29625f8
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wnm_sta.h
@@ -0,0 +1,93 @@
+/*
+ * IEEE 802.11v WNM related functions and structures
+ * Copyright (c) 2011-2012, Qualcomm Atheros, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WNM_STA_H
+#define WNM_STA_H
+
+struct measurement_pilot {
+ u8 measurement_pilot;
+ u8 subelem_len;
+ u8 subelems[255];
+};
+
+struct multiple_bssid {
+ u8 max_bssid_indicator;
+ u8 subelem_len;
+ u8 subelems[255];
+};
+
+struct neighbor_report {
+ u8 bssid[ETH_ALEN];
+ u32 bssid_info;
+ u8 regulatory_class;
+ u8 channel_number;
+ u8 phy_type;
+ u8 preference; /* valid if preference_present=1 */
+ u16 tsf_offset; /* valid if tsf_present=1 */
+ u16 beacon_int; /* valid if tsf_present=1 */
+ char country[2]; /* valid if country_present=1 */
+ u8 rm_capab[5]; /* valid if rm_capab_present=1 */
+ u16 bearing; /* valid if bearing_present=1 */
+ u16 rel_height; /* valid if bearing_present=1 */
+ u32 distance; /* valid if bearing_present=1 */
+ u64 bss_term_tsf; /* valid if bss_term_present=1 */
+ u16 bss_term_dur; /* valid if bss_term_present=1 */
+ unsigned int preference_present:1;
+ unsigned int tsf_present:1;
+ unsigned int country_present:1;
+ unsigned int rm_capab_present:1;
+ unsigned int bearing_present:1;
+ unsigned int bss_term_present:1;
+ unsigned int acceptable:1;
+#ifdef CONFIG_MBO
+ unsigned int is_first:1;
+#endif /* CONFIG_MBO */
+ struct measurement_pilot *meas_pilot;
+ struct multiple_bssid *mul_bssid;
+ int freq;
+};
+
+
+int ieee802_11_send_wnmsleep_req(struct wpa_supplicant *wpa_s,
+ u8 action, u16 intval, struct wpabuf *tfs_req);
+
+void ieee802_11_rx_wnm_action(struct wpa_supplicant *wpa_s,
+ const struct ieee80211_mgmt *mgmt, size_t len);
+
+int wnm_send_bss_transition_mgmt_query(struct wpa_supplicant *wpa_s,
+ u8 query_reason,
+ const char *btm_candidates,
+ int cand_list);
+
+void wnm_deallocate_memory(struct wpa_supplicant *wpa_s);
+int wnm_send_coloc_intf_report(struct wpa_supplicant *wpa_s, u8 dialog_token,
+ const struct wpabuf *elems);
+void wnm_set_coloc_intf_elems(struct wpa_supplicant *wpa_s,
+ struct wpabuf *elems);
+
+
+#ifdef CONFIG_WNM
+
+int wnm_scan_process(struct wpa_supplicant *wpa_s, int reply_on_fail);
+void wnm_clear_coloc_intf_reporting(struct wpa_supplicant *wpa_s);
+
+#else /* CONFIG_WNM */
+
+static inline int wnm_scan_process(struct wpa_supplicant *wpa_s,
+ int reply_on_fail)
+{
+ return 0;
+}
+
+static inline void wnm_clear_coloc_intf_reporting(struct wpa_supplicant *wpa_s)
+{
+}
+
+#endif /* CONFIG_WNM */
+
+#endif /* WNM_STA_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/addinterface.cpp b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/addinterface.cpp
new file mode 100755
index 0000000..7d92f63
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/addinterface.cpp
@@ -0,0 +1,239 @@
+/*
+ * wpa_gui - AddInterface class
+ * Copyright (c) 2008, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include <cstdio>
+#include "common/wpa_ctrl.h"
+
+#include <QMessageBox>
+
+#include "wpagui.h"
+#include "addinterface.h"
+
+#ifdef CONFIG_NATIVE_WINDOWS
+#include <windows.h>
+
+#ifndef WPA_KEY_ROOT
+#define WPA_KEY_ROOT HKEY_LOCAL_MACHINE
+#endif
+#ifndef WPA_KEY_PREFIX
+#define WPA_KEY_PREFIX TEXT("SOFTWARE\\wpa_supplicant")
+#endif
+#endif /* CONFIG_NATIVE_WINDOWS */
+
+
+AddInterface::AddInterface(WpaGui *_wpagui, QWidget *parent)
+ : QDialog(parent), wpagui(_wpagui)
+{
+ setWindowTitle(tr("Select network interface to add"));
+ resize(400, 200);
+ vboxLayout = new QVBoxLayout(this);
+
+ interfaceWidget = new QTreeWidget(this);
+ interfaceWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
+ interfaceWidget->setUniformRowHeights(true);
+ interfaceWidget->setSortingEnabled(true);
+ interfaceWidget->setColumnCount(3);
+ interfaceWidget->headerItem()->setText(0, tr("driver"));
+ interfaceWidget->headerItem()->setText(1, tr("interface"));
+ interfaceWidget->headerItem()->setText(2, tr("description"));
+ interfaceWidget->setItemsExpandable(false);
+ interfaceWidget->setRootIsDecorated(false);
+ vboxLayout->addWidget(interfaceWidget);
+
+ connect(interfaceWidget,
+ SIGNAL(itemActivated(QTreeWidgetItem *, int)), this,
+ SLOT(interfaceSelected(QTreeWidgetItem *)));
+
+ addInterfaces();
+}
+
+
+void AddInterface::addInterfaces()
+{
+#ifdef CONFIG_CTRL_IFACE_NAMED_PIPE
+ struct wpa_ctrl *ctrl;
+ int ret;
+ char buf[2048];
+ size_t len;
+
+ ctrl = wpa_ctrl_open(NULL);
+ if (ctrl == NULL)
+ return;
+
+ len = sizeof(buf) - 1;
+ ret = wpa_ctrl_request(ctrl, "INTERFACE_LIST", 14, buf, &len, NULL);
+ if (ret < 0) {
+ wpa_ctrl_close(ctrl);
+ return;
+ }
+ buf[len] = '\0';
+
+ wpa_ctrl_close(ctrl);
+
+ QString ifaces(buf);
+ QStringList lines = ifaces.split(QRegExp("\\n"));
+ for (QStringList::Iterator it = lines.begin();
+ it != lines.end(); it++) {
+ QStringList arg = (*it).split(QChar('\t'));
+ if (arg.size() < 3)
+ continue;
+ QTreeWidgetItem *item = new QTreeWidgetItem(interfaceWidget);
+ if (!item)
+ break;
+
+ item->setText(0, arg[0]);
+ item->setText(1, arg[1]);
+ item->setText(2, arg[2]);
+ }
+
+ interfaceWidget->resizeColumnToContents(0);
+ interfaceWidget->resizeColumnToContents(1);
+ interfaceWidget->resizeColumnToContents(2);
+#endif /* CONFIG_CTRL_IFACE_NAMED_PIPE */
+}
+
+
+#ifdef CONFIG_NATIVE_WINDOWS
+bool AddInterface::addRegistryInterface(const QString &ifname)
+{
+ HKEY hk, ihk;
+ LONG ret;
+ int id, tmp;
+ TCHAR name[10];
+ DWORD val, i;
+
+ ret = RegOpenKeyEx(WPA_KEY_ROOT, WPA_KEY_PREFIX TEXT("\\interfaces"),
+ 0, KEY_ENUMERATE_SUB_KEYS | KEY_CREATE_SUB_KEY,
+ &hk);
+ if (ret != ERROR_SUCCESS)
+ return false;
+
+ id = -1;
+
+ for (i = 0; ; i++) {
+ TCHAR name[255];
+ DWORD namelen;
+
+ namelen = 255;
+ ret = RegEnumKeyEx(hk, i, name, &namelen, NULL, NULL, NULL,
+ NULL);
+
+ if (ret == ERROR_NO_MORE_ITEMS)
+ break;
+
+ if (ret != ERROR_SUCCESS)
+ break;
+
+ if (namelen >= 255)
+ namelen = 255 - 1;
+ name[namelen] = '\0';
+
+#ifdef UNICODE
+ QString s((QChar *) name, namelen);
+#else /* UNICODE */
+ QString s(name);
+#endif /* UNICODE */
+ tmp = s.toInt();
+ if (tmp > id)
+ id = tmp;
+ }
+
+ id += 1;
+
+#ifdef UNICODE
+ wsprintf(name, L"%04d", id);
+#else /* UNICODE */
+ os_snprintf(name, sizeof(name), "%04d", id);
+#endif /* UNICODE */
+ ret = RegCreateKeyEx(hk, name, 0, NULL, 0, KEY_WRITE, NULL, &ihk,
+ NULL);
+ RegCloseKey(hk);
+ if (ret != ERROR_SUCCESS)
+ return false;
+
+#ifdef UNICODE
+ RegSetValueEx(ihk, TEXT("adapter"), 0, REG_SZ,
+ (LPBYTE) ifname.unicode(),
+ (ifname.length() + 1) * sizeof(TCHAR));
+
+#else /* UNICODE */
+ RegSetValueEx(ihk, TEXT("adapter"), 0, REG_SZ,
+ (LPBYTE) ifname.toLocal8Bit(), ifname.length() + 1);
+#endif /* UNICODE */
+ RegSetValueEx(ihk, TEXT("config"), 0, REG_SZ,
+ (LPBYTE) TEXT("default"), 8 * sizeof(TCHAR));
+ RegSetValueEx(ihk, TEXT("ctrl_interface"), 0, REG_SZ,
+ (LPBYTE) TEXT(""), 1 * sizeof(TCHAR));
+ val = 1;
+ RegSetValueEx(ihk, TEXT("skip_on_error"), 0, REG_DWORD, (LPBYTE) &val,
+ sizeof(val));
+
+ RegCloseKey(ihk);
+ return true;
+}
+#endif /* CONFIG_NATIVE_WINDOWS */
+
+
+void AddInterface::interfaceSelected(QTreeWidgetItem *sel)
+{
+ if (!sel)
+ return;
+
+#ifdef CONFIG_CTRL_IFACE_NAMED_PIPE
+ struct wpa_ctrl *ctrl;
+ int ret;
+ char buf[20], cmd[256];
+ size_t len;
+
+ /*
+ * INTERFACE_ADD <ifname>TAB<confname>TAB<driver>TAB<ctrl_interface>TAB
+ * <driver_param>TAB<bridge_name>
+ */
+ snprintf(cmd, sizeof(cmd),
+ "INTERFACE_ADD %s\t%s\t%s\t%s\t%s\t%s",
+ sel->text(1).toLocal8Bit().constData(),
+ "default",
+ sel->text(0).toLocal8Bit().constData(),
+ "yes", "", "");
+ cmd[sizeof(cmd) - 1] = '\0';
+
+ ctrl = wpa_ctrl_open(NULL);
+ if (ctrl == NULL)
+ return;
+
+ len = sizeof(buf) - 1;
+ ret = wpa_ctrl_request(ctrl, cmd, strlen(cmd), buf, &len, NULL);
+ wpa_ctrl_close(ctrl);
+
+ if (ret < 0) {
+ QMessageBox::warning(this, "wpa_gui",
+ tr("Add interface command could not be "
+ "completed."));
+ return;
+ }
+
+ buf[len] = '\0';
+ if (buf[0] != 'O' || buf[1] != 'K') {
+ QMessageBox::warning(this, "wpa_gui",
+ tr("Failed to add the interface."));
+ return;
+ }
+
+#endif /* CONFIG_CTRL_IFACE_NAMED_PIPE */
+
+#ifdef CONFIG_NATIVE_WINDOWS
+ if (!addRegistryInterface(sel->text(1))) {
+ QMessageBox::information(this, "wpa_gui",
+ tr("Failed to add the interface into "
+ "registry."));
+ }
+#endif /* CONFIG_NATIVE_WINDOWS */
+
+ wpagui->selectAdapter(sel->text(1));
+ close();
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/addinterface.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/addinterface.h
new file mode 100755
index 0000000..332fc71
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/addinterface.h
@@ -0,0 +1,39 @@
+/*
+ * wpa_gui - AddInterface class
+ * Copyright (c) 2008, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef ADDINTERFACE_H
+#define ADDINTERFACE_H
+
+#include <QObject>
+
+#include <QDialog>
+#include <QTreeWidget>
+#include <QVBoxLayout>
+
+class WpaGui;
+
+class AddInterface : public QDialog
+{
+ Q_OBJECT
+
+public:
+ AddInterface(WpaGui *_wpagui, QWidget *parent = 0);
+
+public slots:
+ virtual void interfaceSelected(QTreeWidgetItem *sel);
+
+private:
+ void addInterfaces();
+ bool addRegistryInterface(const QString &ifname);
+
+ QVBoxLayout *vboxLayout;
+ QTreeWidget *interfaceWidget;
+ WpaGui *wpagui;
+};
+
+#endif /* ADDINTERFACE_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/eventhistory.cpp b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/eventhistory.cpp
new file mode 100755
index 0000000..09145cd
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/eventhistory.cpp
@@ -0,0 +1,124 @@
+/*
+ * wpa_gui - EventHistory class
+ * Copyright (c) 2005-2006, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include <QHeaderView>
+#include <QScrollBar>
+
+#include "eventhistory.h"
+
+
+int EventListModel::rowCount(const QModelIndex &) const
+{
+ return msgList.count();
+}
+
+
+int EventListModel::columnCount(const QModelIndex &) const
+{
+ return 2;
+}
+
+
+QVariant EventListModel::data(const QModelIndex &index, int role) const
+{
+ if (!index.isValid())
+ return QVariant();
+
+ if (role == Qt::DisplayRole)
+ if (index.column() == 0) {
+ if (index.row() >= timeList.size())
+ return QVariant();
+ return timeList.at(index.row());
+ } else {
+ if (index.row() >= msgList.size())
+ return QVariant();
+ return msgList.at(index.row());
+ }
+ else
+ return QVariant();
+}
+
+
+QVariant EventListModel::headerData(int section, Qt::Orientation orientation,
+ int role) const
+{
+ if (role != Qt::DisplayRole)
+ return QVariant();
+
+ if (orientation == Qt::Horizontal) {
+ switch (section) {
+ case 0:
+ return QString(tr("Timestamp"));
+ case 1:
+ return QString(tr("Message"));
+ default:
+ return QVariant();
+ }
+ } else
+ return QString("%1").arg(section);
+}
+
+
+void EventListModel::addEvent(QString time, QString msg)
+{
+ beginInsertRows(QModelIndex(), msgList.size(), msgList.size() + 1);
+ timeList << time;
+ msgList << msg;
+ endInsertRows();
+}
+
+
+EventHistory::EventHistory(QWidget *parent, const char *, bool, Qt::WindowFlags)
+ : QDialog(parent)
+{
+ setupUi(this);
+
+ connect(closeButton, SIGNAL(clicked()), this, SLOT(close()));
+
+ eventListView->setItemsExpandable(false);
+ eventListView->setRootIsDecorated(false);
+ elm = new EventListModel(parent);
+ eventListView->setModel(elm);
+}
+
+
+EventHistory::~EventHistory()
+{
+ destroy();
+ delete elm;
+}
+
+
+void EventHistory::languageChange()
+{
+ retranslateUi(this);
+}
+
+
+void EventHistory::addEvents(WpaMsgList msgs)
+{
+ WpaMsgList::iterator it;
+ for (it = msgs.begin(); it != msgs.end(); it++)
+ addEvent(*it);
+}
+
+
+void EventHistory::addEvent(WpaMsg msg)
+{
+ bool scroll = true;
+
+ if (eventListView->verticalScrollBar()->value() <
+ eventListView->verticalScrollBar()->maximum())
+ scroll = false;
+
+ elm->addEvent(msg.getTimestamp().toString("yyyy-MM-dd hh:mm:ss.zzz"),
+ msg.getMsg());
+
+ if (scroll)
+ eventListView->scrollToBottom();
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/eventhistory.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/eventhistory.h
new file mode 100755
index 0000000..afd7b63
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/eventhistory.h
@@ -0,0 +1,57 @@
+/*
+ * wpa_gui - EventHistory class
+ * Copyright (c) 2005-2006, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef EVENTHISTORY_H
+#define EVENTHISTORY_H
+
+#include <QObject>
+#include "ui_eventhistory.h"
+
+
+class EventListModel : public QAbstractTableModel
+{
+ Q_OBJECT
+
+public:
+ EventListModel(QObject *parent = 0)
+ : QAbstractTableModel(parent) {}
+
+ int rowCount(const QModelIndex &parent = QModelIndex()) const;
+ int columnCount(const QModelIndex &parent = QModelIndex()) const;
+ QVariant data(const QModelIndex &index, int role) const;
+ QVariant headerData(int section, Qt::Orientation orientation,
+ int role = Qt::DisplayRole) const;
+ void addEvent(QString time, QString msg);
+
+private:
+ QStringList timeList;
+ QStringList msgList;
+};
+
+
+class EventHistory : public QDialog, public Ui::EventHistory
+{
+ Q_OBJECT
+
+public:
+ EventHistory(QWidget *parent = 0, const char *name = 0,
+ bool modal = false, Qt::WindowFlags fl = 0);
+ ~EventHistory();
+
+public slots:
+ virtual void addEvents(WpaMsgList msgs);
+ virtual void addEvent(WpaMsg msg);
+
+protected slots:
+ virtual void languageChange();
+
+private:
+ EventListModel *elm;
+};
+
+#endif /* EVENTHISTORY_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/eventhistory.ui b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/eventhistory.ui
new file mode 100755
index 0000000..afe9149
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/eventhistory.ui
@@ -0,0 +1,61 @@
+<ui version="4.0" >
+ <class>EventHistory</class>
+ <widget class="QDialog" name="EventHistory" >
+ <property name="geometry" >
+ <rect>
+ <x>0</x>
+ <y>0</y>
+ <width>533</width>
+ <height>285</height>
+ </rect>
+ </property>
+ <property name="windowTitle" >
+ <string>Event history</string>
+ </property>
+ <layout class="QGridLayout" >
+ <item row="0" column="0" colspan="2" >
+ <widget class="QTreeView" name="eventListView" >
+ <property name="sizePolicy" >
+ <sizepolicy vsizetype="Expanding" hsizetype="Expanding" >
+ <horstretch>0</horstretch>
+ <verstretch>0</verstretch>
+ </sizepolicy>
+ </property>
+ <property name="verticalScrollBarPolicy" >
+ <enum>Qt::ScrollBarAlwaysOn</enum>
+ </property>
+ <property name="selectionMode" >
+ <enum>QAbstractItemView::NoSelection</enum>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="0" >
+ <spacer>
+ <property name="orientation" >
+ <enum>Qt::Horizontal</enum>
+ </property>
+ <property name="sizeHint" >
+ <size>
+ <width>40</width>
+ <height>20</height>
+ </size>
+ </property>
+ </spacer>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QPushButton" name="closeButton" >
+ <property name="text" >
+ <string>Close</string>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ <layoutdefault spacing="6" margin="11" />
+ <pixmapfunction></pixmapfunction>
+ <includes>
+ <include location="local" >wpamsg.h</include>
+ </includes>
+ <resources/>
+ <connections/>
+</ui>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons.qrc b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons.qrc
new file mode 100755
index 0000000..dd72c7e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons.qrc
@@ -0,0 +1,9 @@
+<RCC>
+ <qresource prefix="/icons" >
+ <file alias="wpa_gui.svg">icons/wpa_gui.svg</file>
+ <file alias="ap.svg">icons/ap.svg</file>
+ <file alias="laptop.svg">icons/laptop.svg</file>
+ <file alias="group.svg">icons/group.svg</file>
+ <file alias="invitation.svg">icons/invitation.svg</file>
+ </qresource>
+</RCC>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/README b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/README
new file mode 100755
index 0000000..3953238
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/README
@@ -0,0 +1,74 @@
+wpa_gui icon files
+
+To convert the svg icons to other formats, make sure inkscape and imagemagick
+are installed and use `make' to create various sized png and xpm icons.
+
+
+wpa_gui.svg
+-----------
+
+Copyright (c) 2008 Bernard Gray <bernard.gray@gmail.com>
+
+The wpa_gui icon is licensed under the GPL version 2. Alternatively, the icon
+may be distributed under the terms of BSD license.
+
+
+ap.svg
+------
+
+mystica_Wireless_Router.svg
+
+http://openclipart.org/media/files/mystica/8390
+Wireless Router
+by: mystica
+last change: April 20, 2008 10:32 pm (File added)
+date: April 20, 2008 10:31 pm
+license: PD
+
+
+laptop.svg
+----------
+
+metalmarious_Laptop.svg
+
+http://openclipart.org/media/files/metalmarious/4056
+Laptop
+by: metalmarious
+last change: May 18, 2008 07:04 pm (File added)
+date: August 27, 2007 04:44 am
+license: PD
+
+
+group.svg
+---------
+
+http://www.openclipart.org/detail/25428
+http://www.openclipart.org/people/Anonymous/Anonymous_Network.svg
+Uploader:
+ Anonymous
+Drawn by:
+ Andrew Fitzsimon / Anonymous
+Created:
+ 2009-04-29 04:07:37
+Description:
+ A network icon by Andrew Fitzsimon. Etiquette Icon set.
+ From 0.18 OCAL database.
+
+Public Domain
+
+
+
+invitation.svg
+--------------
+
+http://www.openclipart.org/detail/974
+http://www.openclipart.org/people/jean_victor_balin/jean_victor_balin_unknown_green.svg
+Uploader:
+ jean_victor_balin
+Drawn by:
+ jean_victor_balin
+Created:
+ 2006-10-27 02:12:13
+Description:
+
+Public Domain
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/ap.svg b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/ap.svg
new file mode 100755
index 0000000..51cc8ce
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/ap.svg
@@ -0,0 +1,832 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+<svg
+ xmlns:dc="http://purl.org/dc/elements/1.1/"
+ xmlns:cc="http://creativecommons.org/ns#"
+ xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+ xmlns:svg="http://www.w3.org/2000/svg"
+ xmlns="http://www.w3.org/2000/svg"
+ xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+ xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+ width="546"
+ height="482.67157"
+ id="svg2"
+ sodipodi:version="0.32"
+ inkscape:version="0.45.1+0.46pre1+devel"
+ sodipodi:docname="Wireless Router.svg"
+ inkscape:output_extension="org.inkscape.output.svg.inkscape"
+ version="1.0"
+ inkscape:export-filename="C:\Documents and Settings\Dan\Skrivbord\Clipart egna (InkScape)\Original\Kanske Upload\Wireless Router.png"
+ inkscape:export-xdpi="310"
+ inkscape:export-ydpi="310">
+ <defs
+ id="defs4">
+ <inkscape:perspective
+ sodipodi:type="inkscape:persp3d"
+ inkscape:vp_x="-50 : 600 : 1"
+ inkscape:vp_y="0 : 1000 : 0"
+ inkscape:vp_z="700 : 600 : 1"
+ inkscape:persp3d-origin="300 : 400 : 1"
+ id="perspective148" />
+ <inkscape:perspective
+ sodipodi:type="inkscape:persp3d"
+ inkscape:vp_x="-50 : 600 : 1"
+ inkscape:vp_y="0 : 1000 : 0"
+ inkscape:vp_z="700 : 600 : 1"
+ inkscape:persp3d-origin="300 : 400 : 1"
+ id="perspective138" />
+ <inkscape:perspective
+ sodipodi:type="inkscape:persp3d"
+ inkscape:vp_x="-50 : 600 : 1"
+ inkscape:vp_y="0 : 1000 : 0"
+ inkscape:vp_z="700 : 600 : 1"
+ inkscape:persp3d-origin="300 : 400 : 1"
+ id="perspective10" />
+ <inkscape:perspective
+ id="perspective2395"
+ inkscape:persp3d-origin="300 : 400 : 1"
+ inkscape:vp_z="700 : 600 : 1"
+ inkscape:vp_y="0 : 1000 : 0"
+ inkscape:vp_x="-50 : 600 : 1"
+ sodipodi:type="inkscape:persp3d" />
+ <filter
+ inkscape:collect="always"
+ id="filter3304">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.27999283"
+ id="feGaussianBlur3306" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3336">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.5315371"
+ id="feGaussianBlur3338" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3368">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.26473573"
+ id="feGaussianBlur3370" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3564"
+ x="-0.37202433"
+ width="1.7440487"
+ y="-0.43252525"
+ height="1.8650506">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.1017616"
+ id="feGaussianBlur3566" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3748"
+ x="-0.41952851"
+ width="1.839057"
+ y="-0.39121628"
+ height="1.7824326">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.1235829"
+ id="feGaussianBlur3750" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3862"
+ x="-0.33298156"
+ width="1.6659631"
+ y="-1.6699424"
+ height="4.3398848">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3864" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3866"
+ x="-0.33298156"
+ width="1.6659631"
+ y="-0.20756502"
+ height="1.4151301">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3868" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3870"
+ x="-0.33298156"
+ width="1.6659631"
+ y="-1.6699424"
+ height="4.3398848">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3872" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3874"
+ x="-0.3380883"
+ width="1.6761765"
+ y="-0.21154897"
+ height="1.4230978">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3876" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3878"
+ x="-0.33298156"
+ width="1.6659631"
+ y="-1.6699424"
+ height="4.3398848">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3880" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3882"
+ x="-0.36018598"
+ width="1.720372"
+ y="-0.20953795"
+ height="1.4190758">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3884" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3886"
+ x="-0.33298156"
+ width="1.6659631"
+ y="-1.6699424"
+ height="4.3398848">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3888" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3890"
+ x="-0.35439494"
+ width="1.7087899"
+ y="-0.20953795"
+ height="1.4190758">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3892" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3894"
+ x="-0.33298156"
+ width="1.6659631"
+ y="-1.6699424"
+ height="4.3398848">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3896" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3898"
+ x="-0.38537359"
+ width="1.7707472"
+ y="-0.20562869"
+ height="1.4112574">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3900" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3902"
+ x="-0.33298156"
+ width="1.6659631"
+ y="-1.6699424"
+ height="4.3398848">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3904" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3906"
+ x="-0.38537359"
+ width="1.7707472"
+ y="-0.21359873"
+ height="1.4271975">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3908" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3910"
+ x="-0.33298156"
+ width="1.6659631"
+ y="-1.6699424"
+ height="4.3398848">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3912" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3914"
+ x="-0.36018598"
+ width="1.720372"
+ y="-0.20562869"
+ height="1.4112574">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3916" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3918"
+ x="-0.33298156"
+ width="1.6659631"
+ y="-1.6699424"
+ height="4.3398848">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3920" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3922"
+ x="-0.36616942"
+ width="1.7323389"
+ y="-0.20953795"
+ height="1.4190758">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3924" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3926"
+ x="-0.33298156"
+ width="1.6659631"
+ y="-1.6699424"
+ height="4.3398848">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3928" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3930"
+ x="-0.34878778"
+ width="1.6975756"
+ y="-0.20186263"
+ height="1.4037253">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3932" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3934"
+ x="-0.33298156"
+ width="1.6659631"
+ y="-1.6699424"
+ height="4.3398848">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3936" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3938"
+ x="-0.32802677"
+ width="1.6560535"
+ y="-0.21568884"
+ height="1.4313776">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3940" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3942"
+ x="-0.33298156"
+ width="1.6659631"
+ y="-1.6699424"
+ height="4.3398848">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3944" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3946"
+ x="-0.32321677"
+ width="1.6464336"
+ y="-0.21568884"
+ height="1.4313776">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3948" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3950"
+ x="-0.33298156"
+ width="1.6659631"
+ y="-1.6699424"
+ height="4.3398848">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3952" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3954"
+ x="-0.3185463"
+ width="1.6370926"
+ y="-0.21359873"
+ height="1.4271975">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3956" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3958"
+ x="-0.33298156"
+ width="1.6659631"
+ y="-1.6699424"
+ height="4.3398848">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3960" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3962"
+ x="-0.28553614"
+ width="1.5710723"
+ y="-0.21568884"
+ height="1.4313776">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.82006695"
+ id="feGaussianBlur3964" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3982"
+ x="-0.0048889387"
+ width="1.0097779"
+ y="-0.26385465"
+ height="1.5277092">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.0547249"
+ id="feGaussianBlur3984" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3996">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.8032234"
+ id="feGaussianBlur3998" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3517"
+ x="-0.25713229"
+ width="1.5142646"
+ y="-0.087099633"
+ height="1.1741993">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.33984317"
+ id="feGaussianBlur3519" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3329"
+ x="-0.18025071"
+ width="1.3605014"
+ y="-1.1780664"
+ height="3.3561328">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.49086099"
+ id="feGaussianBlur3331" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3333"
+ x="-0.15131117"
+ width="1.3026223"
+ y="-0.1853139"
+ height="1.3706278">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.49086099"
+ id="feGaussianBlur3335" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3337"
+ x="-0.14412392"
+ width="1.2882478"
+ y="-0.18013415"
+ height="1.3602683">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.49086099"
+ id="feGaussianBlur3339" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3341"
+ x="-1.1780664"
+ width="3.3561328"
+ y="-0.23067047"
+ height="1.4613409">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.49086099"
+ id="feGaussianBlur3343" />
+ </filter>
+ </defs>
+ <sodipodi:namedview
+ id="base"
+ pagecolor="#ffffff"
+ bordercolor="#666666"
+ borderopacity="1.0"
+ gridtolerance="10000"
+ guidetolerance="10"
+ objecttolerance="10"
+ inkscape:pageopacity="0.0"
+ inkscape:pageshadow="2"
+ inkscape:zoom="0.98994949"
+ inkscape:cx="233.05018"
+ inkscape:cy="176.49031"
+ inkscape:document-units="px"
+ inkscape:current-layer="layer2"
+ showgrid="false"
+ inkscape:window-width="1152"
+ inkscape:window-height="838"
+ inkscape:window-x="0"
+ inkscape:window-y="0" />
+ <metadata
+ id="metadata7">
+ <rdf:RDF>
+ <cc:Work
+ rdf:about="">
+ <dc:format>image/svg+xml</dc:format>
+ <dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+ </cc:Work>
+ </rdf:RDF>
+ </metadata>
+ <g
+ inkscape:groupmode="layer"
+ id="layer2"
+ transform="translate(-45.788597,-496.6196)">
+ <path
+ style="fill:#606060;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 75.574315,977.86259 L 535.56828,979.20564 L 564.86002,979.29116 C 564.86002,979.29116 573.43146,977.86259 573.43146,973.57687 C 573.43146,969.29116 574.14573,959.29117 574.14573,959.29117 L 566.03832,959.7296 L 72.464255,956.66717 L 58.640665,955.63307 C 58.640665,955.63307 59.860025,973.57688 65.574315,975.71973 C 71.288595,977.86259 75.574315,977.14831 75.574315,977.86259 z"
+ id="path2402"
+ sodipodi:nodetypes="cccsccccsc" />
+ <path
+ style="fill:#dddddd;fill-opacity:1;fill-rule:evenodd;stroke:#b2b2b2;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 67.002885,957.14831 L 566.28859,960.00545 C 566.28859,960.00545 577.71717,959.29116 583.43146,955.71973 C 589.14574,952.14831 588.43146,942.86259 588.43146,942.86259 C 588.43146,942.86259 591.28859,907.14831 591.28859,902.14831 C 591.28859,897.14831 574.86002,839.29116 572.00288,827.86259 C 569.14574,816.43402 557.00288,757.1483 557.00288,757.1483 C 557.00288,757.1483 555.57431,749.29116 552.71717,748.57688 C 549.86002,747.86259 548.43146,748.57688 548.43146,748.57688 L 558.43146,797.86259 L 577.71717,880.00545 L 578.07431,881.34473 L 579.05004,882.28742 L 584.86002,897.14831 C 584.86002,897.14831 584.93925,904.12528 581.70701,906.43402 C 576.70701,910.00545 557.71717,910.71973 557.71717,910.71973 L 68.431455,907.86259 C 68.431455,907.86259 57.002885,906.43402 54.145745,903.57688 C 51.288595,900.71973 52.298745,895.51053 52.298745,895.51053 L 94.860025,745.00545 C 94.860025,745.00545 86.288605,747.86259 84.145745,752.1483 C 82.002885,756.43402 71.288595,811.43402 68.431455,820.00545 C 65.574315,828.57688 47.002885,893.57688 47.002885,893.57688 C 47.002885,893.57688 46.288597,900.00545 46.288597,903.57688 C 46.288597,907.14831 48.431455,946.43402 48.431455,946.43402 C 48.431455,946.43402 52.002885,953.57688 55.574315,955.00545 C 59.145745,956.43402 68.431455,957.14831 67.002885,957.14831 z"
+ id="path2404"
+ sodipodi:nodetypes="ccscsscsccccccsccsccsscscsc" />
+ <path
+ style="fill:#ececec;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3336)"
+ d="M 562.71717,958.57688 C 562.71717,958.57688 572.00288,957.86259 572.00288,951.43402 C 572.00288,945.00545 575.57431,922.14831 572.00288,918.57688 C 568.43146,915.00545 564.86002,912.86259 564.86002,912.86259 C 564.86002,912.86259 586.28859,903.57688 585.57431,907.86259 C 584.86002,912.14831 581.28859,914.29116 581.28859,920.00545 C 581.28859,925.71973 580.57431,948.57688 580.57431,948.57688 C 580.57431,948.57688 578.43146,952.86259 581.28859,953.57688 C 584.14574,954.29116 582.71717,955.71973 582.71717,955.71973 L 576.28859,957.86259 L 570.57431,958.57688 L 562.71717,958.57688 z"
+ id="path2406" />
+ <path
+ style="fill:#ededed;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 75.574315,913.57688 L 560.57431,915.71973 L 557.71717,955.71973 L 77.002885,954.29116 L 75.574315,913.57688 z"
+ id="path2408" />
+ <path
+ style="fill:#020202;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 100.57432,925.00545 L 541.28859,927.86259 C 541.28859,927.86259 548.43146,932.14831 548.43146,936.43402 C 548.43146,940.71973 540.57431,945.71973 540.57431,945.71973 L 98.431455,942.86259 C 98.431455,942.86259 89.145745,938.57688 89.860025,932.86259 C 90.574315,927.14831 101.2886,924.29116 100.57432,925.00545 z"
+ id="path2410" />
+ <path
+ style="fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 71.497795,907.90591 L 557.85419,910.32545 L 573.61002,909.11259 C 573.61002,909.11259 581.28967,908.48718 583.43146,904.46973 C 584.17421,903.07651 585.22722,901.79095 585.2275,899.8245 C 585.22862,892.20247 577.89573,880.63045 577.89573,880.63045 C 577.89573,880.63045 578.20783,882.29016 577.30114,882.74322 C 575.50038,883.64304 573.664,884.53037 571.28859,885.00545 C 567.71717,885.71973 66.036055,879.91879 66.036055,879.91879 L 59.860025,880.00545 L 56.288605,877.68402 L 52.002885,896.43402 C 52.002885,896.43402 51.828665,903.29437 57.673845,905.51053 C 62.003235,907.15199 72.212085,908.6202 71.497795,907.90591 z"
+ id="path2412"
+ sodipodi:nodetypes="cccsscssccccsc" />
+ <path
+ style="fill:#2c2c2c;fill-opacity:1;fill-rule:evenodd;stroke:#252525;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 93.431455,743.57688 L 59.145745,868.57688 C 59.145745,868.57688 57.538605,871.96973 60.574315,873.57688 C 65.381975,876.12212 74.681455,875.18402 74.681455,875.18402 C 74.681455,875.18402 567.00288,879.29116 569.86002,878.57688 C 572.71717,877.86259 575.03859,876.96974 575.03859,876.96974 L 575.21717,868.75545 C 575.21717,868.75545 579.61685,882.27622 576.28859,883.75545 C 573.07431,885.18402 566.28859,885.00545 566.28859,885.00545 L 64.860025,880.71973 L 58.431455,879.29116 L 56.645745,876.79116 L 57.861935,870.85997 L 93.431455,743.57688 z"
+ id="path2414"
+ sodipodi:nodetypes="ccscsccscccccc" />
+ <path
+ style="fill:#d5d5d5;fill-opacity:1;fill-rule:evenodd;stroke:#d1d1d1;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3748)"
+ d="M 62.002885,879.82688 L 62.181455,874.29116 L 60.217165,873.93402 L 57.360025,874.82688 L 56.824315,876.25545 C 56.824315,876.25545 56.467165,877.86259 57.360025,878.21973 C 58.252885,878.57688 59.860025,879.11259 59.860025,879.11259 L 62.002885,879.82688 z"
+ id="path2416" />
+ <path
+ style="fill:#d5d5d5;fill-opacity:1;fill-rule:evenodd;stroke:#dadada;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3564)"
+ d="M 571.82431,883.04116 C 571.82431,882.32688 570.57431,879.82688 572.18146,878.93402 C 573.78859,878.04116 575.03859,878.57688 575.03859,878.57688 C 575.03859,878.57688 578.07431,881.25545 577.36002,881.43402 C 576.64574,881.61259 576.46717,882.50545 574.68146,883.21973 C 572.89574,883.93402 572.36002,883.21973 571.82431,883.04116 z"
+ id="path2418" />
+ <path
+ style="fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#2aea00;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3341)"
+ d="M 194.42891,930.61513 L 194.68145,934.46973"
+ id="path2420"
+ sodipodi:nodetypes="cc" />
+ <path
+ style="fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#2aea00;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3337)"
+ d="M 192.18145,932.32688 C 192.18145,932.32688 189.18906,937.68402 194.50288,937.86259 C 200.57352,938.06659 197.36003,932.50545 197.36003,932.50545"
+ id="path2422"
+ sodipodi:nodetypes="csc" />
+ <path
+ sodipodi:type="arc"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:#444444;stroke-width:0.92299998;stroke-linecap:butt;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+ id="path2424"
+ sodipodi:cx="289.82144"
+ sodipodi:cy="742.89789"
+ sodipodi:rx="4.2857141"
+ sodipodi:ry="4.2857141"
+ d="M 294.10716,742.89789 A 4.2857141,4.2857141 0 1 1 285.53573,742.89789 A 4.2857141,4.2857141 0 1 1 294.10716,742.89789 z"
+ transform="translate(-57.282828,191.92898)" />
+ <path
+ sodipodi:type="arc"
+ style="fill:#101010;fill-opacity:1;fill-rule:nonzero;stroke:#000000;stroke-width:1.92626119;stroke-linecap:butt;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+ id="path2439"
+ sodipodi:cx="289.82144"
+ sodipodi:cy="742.89789"
+ sodipodi:rx="4.2857141"
+ sodipodi:ry="4.2857141"
+ d="M 294.10716,742.89789 A 4.2857141,4.2857141 0 1 1 285.53573,742.89789 A 4.2857141,4.2857141 0 1 1 294.10716,742.89789 z"
+ transform="matrix(0.4791666,0,0,0.4791666,93.755115,578.94427)" />
+ <path
+ sodipodi:type="arc"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:#7b7b7b;stroke-width:1.70648665;stroke-linecap:butt;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+ id="path3211"
+ sodipodi:cx="289.82144"
+ sodipodi:cy="742.89789"
+ sodipodi:rx="4.2857141"
+ sodipodi:ry="4.2857141"
+ d="M 294.10716,742.89789 A 4.2857141,4.2857141 0 1 1 285.53573,742.89789 A 4.2857141,4.2857141 0 1 1 294.10716,742.89789 z"
+ transform="matrix(0.5109914,0,0,0.5109914,116.22806,556.99816)" />
+ <path
+ sodipodi:type="arc"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:#7b7b7b;stroke-width:1.70648665;stroke-linecap:butt;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+ id="path3213"
+ sodipodi:cx="289.82144"
+ sodipodi:cy="742.89789"
+ sodipodi:rx="4.2857141"
+ sodipodi:ry="4.2857141"
+ d="M 294.10716,742.89789 A 4.2857141,4.2857141 0 1 1 285.53573,742.89789 A 4.2857141,4.2857141 0 1 1 294.10716,742.89789 z"
+ transform="matrix(0.5109914,0,0,0.5109914,122.47805,556.99816)" />
+ <path
+ sodipodi:type="arc"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:#7b7b7b;stroke-width:1.70648665;stroke-linecap:butt;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+ id="path3215"
+ sodipodi:cx="289.82144"
+ sodipodi:cy="742.89789"
+ sodipodi:rx="4.2857141"
+ sodipodi:ry="4.2857141"
+ d="M 294.10716,742.89789 A 4.2857141,4.2857141 0 1 1 285.53573,742.89789 A 4.2857141,4.2857141 0 1 1 294.10716,742.89789 z"
+ transform="matrix(0.5109914,0,0,0.5109914,119.44234,552.71244)" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#606060;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 308.07431,934.29116 C 308.07431,934.29116 307.00288,935.71973 306.28859,936.61259 C 305.57431,937.50544 305.57431,939.11259 304.32431,938.57688 C 303.07431,938.04116 301.11002,936.07688 301.28859,934.64831 C 301.46717,933.21974 304.32431,931.07688 304.32431,931.07688 C 304.32431,931.07688 305.03859,932.1483 306.11002,932.86259 C 307.18145,933.57688 307.89574,934.11259 308.07431,934.29116 z"
+ id="path3217"
+ sodipodi:nodetypes="cssscsc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#28cc03;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3333)"
+ d="M 336.28859,931.43402 L 340.57431,931.43402 L 341.82431,932.68402 L 341.82431,935.00545 L 340.93145,936.79116 L 336.46717,936.79116 L 335.03859,935.71973 L 335.03859,932.50545 L 336.28859,931.43402 z"
+ id="path3221"
+ sodipodi:nodetypes="ccccccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#28cc03;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3329)"
+ d="M 335.75288,938.57688 L 341.28859,938.57688"
+ id="path3223" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#4d4d4d;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 369.86002,931.43402 L 374.14574,931.43402 L 375.39574,932.68402 L 375.39574,935.00545 L 374.50288,936.79116 L 370.0386,936.79116 L 368.61002,935.71973 L 368.61002,932.50545 L 369.86002,931.43402 z"
+ id="path3225"
+ sodipodi:nodetypes="ccccccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#4d4d4d;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 369.32431,938.57688 L 374.86002,938.57688"
+ id="path3227" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#4d4d4d;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 407.00288,931.79116 L 411.2886,931.79116 L 412.5386,933.04116 L 412.5386,935.36259 L 411.64574,937.1483 L 407.18147,937.1483 L 405.75288,936.07687 L 405.75288,932.86259 L 407.00288,931.79116 z"
+ id="path3229"
+ sodipodi:nodetypes="ccccccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#4d4d4d;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 406.46717,938.93402 L 412.00288,938.93402"
+ id="path3231" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#4d4d4d;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 444.14574,931.96973 L 448.43145,931.96973 L 449.68145,933.21973 L 449.68145,935.54116 L 448.78859,937.32687 L 444.32431,937.32687 L 442.89574,936.25544 L 442.89574,933.04116 L 444.14574,931.96973 z"
+ id="path3233"
+ sodipodi:nodetypes="ccccccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#4d4d4d;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 443.61002,939.11259 L 449.14574,939.11259"
+ id="path3235" />
+ <path
+ style="font-size:12px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:#28cc03;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Dominican;-inkscape-font-specification:Dominican;filter:url(#filter3517)"
+ d="M 329.05831,937.86898 L 329.10629,932.30075 L 328.72213,932.54098 C 328.65816,932.59689 328.60226,932.62485 328.55441,932.62484 C 328.52242,932.62485 328.47243,932.59085 328.40444,932.52285 C 328.33646,932.45487 328.30245,932.38486 328.30245,932.31283 C 328.30245,932.22495 328.34841,932.12497 328.44034,932.0129 C 328.53225,931.90085 328.62618,931.78879 328.72213,931.67672 L 329.68234,930.33273 L 330.47445,930.78903 L 330.46236,938.5527 C 330.46236,938.64889 330.38631,938.69699 330.23421,938.69699 C 330.1783,938.69699 330.13437,938.69296 330.10238,938.6849 C 329.86239,938.62094 329.6224,938.56088 329.38241,938.50472 C 329.16634,938.40072 329.05831,938.18881 329.05831,937.86898 L 329.05831,937.86898 z"
+ id="text3237" />
+ <path
+ style="font-size:12px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:#939393;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Dominican;-inkscape-font-specification:Dominican"
+ d="M 364.94248,932.84854 C 364.94246,933.5126 364.7065,934.32059 364.23458,935.27249 C 363.84249,936.05667 363.33443,936.86868 362.71041,937.70852 L 362.50643,937.97256 L 363.8984,937.94876 C 364.14644,937.94876 364.37044,937.97476 364.5704,938.02676 C 364.77034,938.07876 364.91036,938.16067 364.99044,938.27249 C 365.16646,938.51248 365.25447,938.70449 365.25448,938.84854 C 365.25447,938.98452 365.19448,939.06851 365.07449,939.10049 C 364.95449,939.13247 364.85042,939.14846 364.76229,939.14846 L 360.97054,939.34072 L 360.5743,937.93667 C 360.83846,937.62466 361.10653,937.31265 361.3785,937.00064 C 361.96248,936.20865 362.44246,935.46463 362.81844,934.76858 C 363.3304,933.83255 363.58638,933.12857 363.58639,932.65664 C 363.58638,932.55264 363.5784,932.46866 363.5624,932.40469 C 363.54641,932.34073 363.51046,932.30875 363.45455,932.30874 C 363.30245,932.30875 362.99044,932.50064 362.51852,932.88442 C 362.21456,933.13248 361.81051,933.50052 361.30636,933.98855 C 360.90646,934.38065 360.70248,934.58462 360.69442,934.60049 L 360.02242,933.65273 C 360.02242,933.58853 360.19845,933.3605 360.5505,932.96865 C 360.95846,932.51261 361.36642,932.1326 361.77438,931.82864 C 362.32638,931.42069 362.79439,931.21671 363.17843,931.2167 C 363.40255,931.21671 363.59053,931.27664 363.74239,931.39651 C 364.29439,931.80448 364.60237,932.04849 364.66634,932.12856 C 364.85042,932.35269 364.94246,932.59268 364.94248,932.84854 L 364.94248,932.84854 z"
+ id="text3241" />
+ <path
+ style="font-size:12px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:#939393;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Dominican;-inkscape-font-specification:Dominican"
+ d="M 398.55154,939.8793 L 397.90371,938.83523 L 398.62368,938.71511 C 399.16762,938.61917 399.70754,938.33914 400.24343,937.87502 C 400.73952,937.44314 400.98757,937.09915 400.98757,936.84304 C 400.98757,936.69119 400.84755,936.55526 400.56753,936.43527 C 400.2875,936.31527 399.97951,936.25528 399.64358,936.25527 C 399.42751,936.25528 399.23348,936.28128 399.06149,936.33328 C 398.88949,936.38528 398.74355,936.47525 398.62368,936.60317 L 398.17947,936.27908 L 398.17947,935.23501 L 398.50356,935.079 C 399.04751,934.83902 399.59548,934.46304 400.14748,933.95107 C 400.69948,933.43912 400.97548,933.05521 400.97549,932.79934 C 400.97548,932.7432 400.95547,932.6951 400.91544,932.65505 C 400.81948,932.55911 400.65957,932.51114 400.43569,932.51113 C 400.10756,932.51114 399.69155,932.61112 399.18765,932.81106 C 398.7797,932.97122 398.5436,933.08328 398.47939,933.14724 L 397.97549,932.00723 C 398.06363,931.91129 398.32363,931.77127 398.75552,931.58718 C 399.29165,931.36307 399.75564,931.25101 400.14748,931.251 C 400.25955,931.25101 400.3716,931.26309 400.48367,931.28726 C 400.85965,931.37516 401.16762,931.52713 401.40762,931.74319 C 401.59169,931.90311 401.78371,932.15506 401.98367,932.49905 C 402.03151,932.57913 402.06149,932.6572 402.07357,932.73324 C 402.08565,932.8093 402.09169,932.88333 402.0917,932.95535 C 402.09169,933.25125 401.98366,933.5712 401.76761,933.91519 C 401.55154,934.25919 401.28347,934.56717 400.9634,934.83914 L 400.50747,935.21121 C 400.8915,935.21121 401.28951,935.43722 401.7015,935.88925 C 402.11348,936.34128 402.31948,936.8273 402.31948,937.34731 C 402.31948,937.65127 402.24947,937.91726 402.10947,938.14529 C 401.96944,938.37332 401.76748,938.6033 401.50356,938.83523 C 401.16762,939.13113 400.79567,939.37112 400.38772,939.5552 C 399.88357,939.78713 399.3915,939.9031 398.91152,939.9031 C 398.84756,939.9031 398.78158,939.89913 398.71359,939.8912 C 398.64559,939.88326 398.59157,939.8793 398.55154,939.8793 L 398.55154,939.8793 z"
+ id="text3245" />
+ <path
+ style="font-size:12px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:#939393;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Dominican;-inkscape-font-specification:Dominican"
+ d="M 433.97515,936.58822 L 436.87884,931.5964 L 438.17486,932.11239 L 438.01885,936.03634 L 438.42718,936.13229 C 438.62712,936.1882 438.73503,936.22018 438.75091,936.22824 C 438.799,936.26022 438.83904,936.31222 438.87103,936.38424 C 438.93499,936.52829 438.98094,936.63431 439.0089,936.7023 C 439.03686,936.77029 439.05083,936.84823 439.05083,936.93612 C 439.05083,937.00033 439.03887,937.06442 439.01495,937.12838 L 437.92291,937.20016 L 437.93499,939.73214 C 437.93499,939.94015 437.86296,940.03219 437.71893,940.00826 C 437.31902,939.95236 437.08709,939.91232 437.02312,939.88815 C 436.78313,939.78414 436.66314,939.57223 436.66314,939.25241 L 436.66314,937.28439 L 434.71893,937.28439 L 433.97515,936.58822 z M 435.48687,936.08431 L 436.80706,936.10812 L 437.01104,933.13229 L 435.48687,936.08431 z"
+ id="text3249" />
+ <path
+ style="font-size:12px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;fill:#979797;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:Dominican;-inkscape-font-specification:Dominican"
+ d="M 109.34409,932.3674 C 109.08016,933.58322 108.9001,934.43124 108.80392,934.91146 C 108.65206,935.67123 108.49617,936.52719 108.33628,937.47933 L 107.04026,936.98715 L 106.27194,932.81124 L 105.39597,937.73129 L 104.01609,937.28744 L 103.3082,929.55929 C 103.3082,929.47141 103.38021,929.42746 103.52426,929.42745 C 103.63608,929.43527 103.71604,929.43918 103.76413,929.43917 C 103.91622,929.43918 104.04623,929.46518 104.15414,929.51718 C 104.26206,929.56919 104.32004,929.65927 104.3281,929.78744 L 104.77194,935.69113 L 105.64792,929.97933 L 107.04026,930.03939 L 107.65219,935.5234 C 107.76425,934.39523 107.95627,933.16318 108.22824,931.82723 C 108.35617,931.17124 108.46811,930.65927 108.56405,930.29135 C 108.63607,930.00327 108.78011,929.49521 108.99618,928.76718 C 109.02011,928.7352 109.04806,928.69919 109.08005,928.65914 C 109.15206,928.58713 109.23213,928.55918 109.32028,928.57528 C 109.55221,928.61533 109.73819,928.69132 109.87821,928.80325 C 110.0182,928.91519 110.08821,929.06723 110.08822,929.25936 C 109.91219,929.97129 109.78413,930.48728 109.70407,930.80734 C 109.57613,931.32736 109.45614,931.84738 109.34409,932.3674 L 109.34409,932.3674 z M 111.18136,931.43136 L 111.18136,930.65133 C 111.18136,930.49924 111.22733,930.36521 111.31924,930.24923 C 111.41116,930.13327 111.52914,930.07529 111.67319,930.07528 C 111.80917,930.07529 111.9332,930.12729 112.04525,930.23129 C 112.15732,930.3353 112.21335,930.45932 112.21335,930.60336 L 112.21335,931.68331 C 112.21335,931.79538 112.16135,931.87741 112.05734,931.92941 C 111.95334,931.98141 111.82932,932.00742 111.68527,932.00741 C 111.54122,932.00742 111.42123,931.95139 111.32529,931.83932 C 111.22933,931.72726 111.18136,931.59128 111.18136,931.43136 L 111.18136,931.43136 z M 111.13339,937.22738 L 111.13339,932.83541 C 111.13339,932.64328 111.24533,932.54721 111.46921,932.54721 C 111.74117,932.54721 111.93515,932.58121 112.05112,932.64919 C 112.16708,932.71719 112.22507,932.81125 112.22507,932.93136 L 112.1174,937.67123 C 112.1174,937.76718 112.04538,937.81515 111.90134,937.81515 C 111.82126,937.81515 111.75118,937.80715 111.69112,937.79116 C 111.63107,937.77517 111.58505,937.76327 111.55307,937.75546 C 111.27329,937.66732 111.13339,937.4913 111.13339,937.22738 L 111.13339,937.22738 z M 113.68845,932.8713 L 113.79648,932.73947 L 114.0726,932.73947 C 114.13657,932.73947 114.21053,932.77743 114.29452,932.85336 C 114.37851,932.92929 114.44455,932.97531 114.49265,932.99142 C 114.60446,933.02341 114.69638,932.93741 114.76839,932.73342 C 114.84042,932.52945 114.92641,932.41342 115.0264,932.38534 C 115.12636,932.35727 115.19638,932.34323 115.23641,932.34323 C 115.38852,932.34323 115.52255,932.39725 115.63852,932.50527 C 115.75449,932.61331 115.81247,932.74326 115.81247,932.89511 L 115.80039,933.36312 C 115.80038,933.5953 115.77237,933.80539 115.71634,933.99337 C 115.6603,934.18136 115.57236,934.27536 115.45248,934.27535 C 115.26839,934.27536 115.14437,934.0953 115.08042,933.73519 C 115.04843,933.55917 114.9924,933.47116 114.91233,933.47116 C 114.84054,933.47116 114.78261,933.53116 114.73855,933.65115 C 114.69449,933.77115 114.67246,934.0112 114.67246,934.3713 C 114.67246,934.48337 114.67246,934.58139 114.67246,934.66537 C 114.67246,934.74936 114.67246,934.81527 114.67246,934.86312 L 114.67246,937.79135 C 114.58456,937.83138 114.48459,937.8514 114.37252,937.8514 C 114.30051,937.8514 114.2125,937.83938 114.10849,937.81533 C 114.00449,937.79128 113.90451,937.73324 113.80857,937.6412 C 113.71261,937.54916 113.66464,937.43124 113.66464,937.28744 L 113.68845,932.8713 z M 119.45774,933.78317 L 119.52951,935.22311 L 117.82552,935.49923 C 117.68173,935.53122 117.58579,935.56723 117.53769,935.60726 C 117.43368,935.68734 117.38168,935.7994 117.38169,935.94345 L 117.40548,936.49533 C 117.40548,936.6152 117.44351,936.72518 117.51955,936.82528 C 117.59561,936.92538 117.68563,936.9714 117.78964,936.96334 C 118.01376,936.93136 118.29379,936.75534 118.62973,936.43527 C 118.96567,936.1152 119.11764,935.91916 119.08567,935.84713 C 119.11764,935.83126 119.16965,935.82333 119.24167,935.82333 C 119.37765,935.82333 119.47763,935.86734 119.5416,935.95535 C 119.60556,936.04336 119.63754,936.13534 119.63755,936.23129 C 119.63754,936.27133 119.62557,936.32333 119.60165,936.38729 C 119.55356,936.57138 119.48556,936.73141 119.39767,936.8674 C 119.35763,936.93136 119.24556,937.07138 119.0615,937.28744 C 118.90964,937.46322 118.75571,937.59115 118.59969,937.67123 C 118.44369,937.75131 118.25765,937.79135 118.0416,937.79135 C 117.89755,937.79135 117.77956,937.77731 117.68766,937.74923 C 117.59573,937.72116 117.50168,937.6672 117.40548,937.58737 L 116.78182,937.0234 C 116.75765,937.00729 116.73361,936.97122 116.70969,936.91519 C 116.68576,936.85916 116.66574,936.81515 116.64963,936.78317 C 116.59372,936.63937 116.56576,936.48739 116.56576,936.32723 L 116.56576,935.3912 C 116.56576,934.78329 116.69974,934.1553 116.96768,933.50723 C 117.23562,932.85916 117.52158,932.53513 117.82552,932.53512 C 117.87363,932.53513 117.90964,932.53915 117.93357,932.54721 C 118.08566,932.59531 118.27969,932.63132 118.51566,932.65524 C 118.75162,932.67917 118.93563,932.76315 119.06771,932.90719 C 119.19979,933.05124 119.29782,933.18924 119.36178,933.32119 C 119.42575,933.45315 119.45773,933.60715 119.45774,933.78317 L 119.45774,933.78317 z M 118.58176,933.77145 C 118.58176,933.63547 118.55576,933.51547 118.50376,933.41146 C 118.45175,933.30746 118.36972,933.23935 118.25765,933.20712 C 118.13754,933.1832 118.0256,933.31125 117.92185,933.59127 C 117.84982,933.79123 117.80173,933.93124 117.77756,934.01132 C 117.71358,934.17929 117.66562,934.32327 117.63363,934.44326 C 117.60165,934.56326 117.58566,934.69125 117.58567,934.82723 L 118.58176,934.59945 L 118.58176,933.77145 z M 120.69589,937.04721 L 120.80356,929.73947 C 120.80356,929.64328 120.85361,929.5712 120.95371,929.52322 C 121.0538,929.47525 121.16379,929.46323 121.28366,929.48715 C 121.45163,929.51914 121.56564,929.57517 121.6257,929.65524 C 121.68576,929.73532 121.71579,929.85129 121.71579,930.00314 L 121.53562,937.61117 C 121.53561,937.6993 121.45969,937.74337 121.30783,937.74337 C 121.25168,937.74337 121.19162,937.73532 121.12766,937.7192 C 120.91965,937.62326 120.79568,937.5433 120.75576,937.47933 C 120.71585,937.41537 120.69589,937.27133 120.69589,937.04721 L 120.69589,937.04721 z M 125.71554,933.78317 L 125.78733,935.22311 L 124.08335,935.49923 C 123.93955,935.53122 123.84359,935.56723 123.7955,935.60726 C 123.6915,935.68734 123.6395,935.7994 123.6395,935.94345 L 123.6633,936.49533 C 123.6633,936.6152 123.70132,936.72518 123.77738,936.82528 C 123.85343,936.92538 123.94344,936.9714 124.04746,936.96334 C 124.27158,936.93136 124.5516,936.75534 124.88755,936.43527 C 125.22348,936.1152 125.37546,935.91916 125.34348,935.84713 C 125.37546,935.83126 125.42746,935.82333 125.49948,935.82333 C 125.63547,935.82333 125.73543,935.86734 125.79941,935.95535 C 125.86337,936.04336 125.89534,936.13534 125.89535,936.23129 C 125.89534,936.27133 125.88339,936.32333 125.85947,936.38729 C 125.81136,936.57138 125.74338,936.73141 125.65548,936.8674 C 125.61544,936.93136 125.50339,937.07138 125.31931,937.28744 C 125.16745,937.46322 125.01352,937.59115 124.85752,937.67123 C 124.7015,937.75131 124.51547,937.79135 124.29941,937.79135 C 124.15537,937.79135 124.03737,937.77731 123.94547,937.74923 C 123.85354,937.72116 123.75949,937.6672 123.6633,937.58737 L 123.03964,937.0234 C 123.01547,937.00729 122.99142,936.97122 122.9675,936.91519 C 122.94357,936.85916 122.92355,936.81515 122.90743,936.78317 C 122.85153,936.63937 122.82358,936.48739 122.82358,936.32723 L 122.82358,935.3912 C 122.82358,934.78329 122.95755,934.1553 123.22549,933.50723 C 123.49344,932.85916 123.77938,932.53513 124.08335,932.53512 C 124.13144,932.53513 124.16745,932.53915 124.19137,932.54721 C 124.34348,932.59531 124.53751,932.63132 124.77347,932.65524 C 125.00942,932.67917 125.19344,932.76315 125.32552,932.90719 C 125.45761,933.05124 125.55562,933.18924 125.6196,933.32119 C 125.68356,933.45315 125.71554,933.60715 125.71554,933.78317 L 125.71554,933.78317 z M 124.83956,933.77145 C 124.83956,933.63547 124.81357,933.51547 124.76157,933.41146 C 124.70955,933.30746 124.62752,933.23935 124.51547,933.20712 C 124.39535,933.1832 124.28341,933.31125 124.17965,933.59127 C 124.10764,933.79123 124.05954,933.93124 124.03537,934.01132 C 123.97141,934.17929 123.92343,934.32327 123.89145,934.44326 C 123.85947,934.56326 123.84348,934.69125 123.84348,934.82723 L 124.83956,934.59945 L 124.83956,933.77145 z M 126.83358,937.26327 C 126.73764,937.19931 126.68966,937.09933 126.68966,936.96334 C 126.68966,936.88327 126.71366,936.80722 126.76163,936.73519 C 126.8096,936.66317 126.86758,936.60916 126.93558,936.57315 C 127.00357,936.53714 127.06955,936.53524 127.13352,936.56747 C 127.34152,936.70346 127.49752,936.80343 127.60153,936.8674 C 127.80148,936.99533 127.94942,937.05929 128.04538,937.05929 C 128.14937,937.05929 128.2134,937.02127 128.23746,936.94522 C 128.2615,936.86917 128.27353,936.81918 128.27353,936.79525 C 128.27353,936.75521 128.27353,936.72726 128.27353,936.71139 C 128.27353,936.54342 128.18149,936.37936 127.99741,936.2192 C 127.82138,936.08322 127.64737,935.94522 127.47537,935.8052 C 127.30338,935.66519 127.17141,935.52719 127.0795,935.3912 C 126.98757,935.25522 126.92362,935.09921 126.88761,934.92318 C 126.85159,934.74716 126.83358,934.59518 126.83358,934.46725 C 126.83358,934.05929 126.94956,933.6893 127.18149,933.35726 C 127.41342,933.02524 127.70944,932.85922 128.06955,932.85922 C 128.17355,932.85922 128.23752,932.85922 128.26145,932.85922 C 128.3176,932.85922 128.35764,932.86728 128.38155,932.88339 L 128.95761,933.23129 C 129.08553,933.31137 129.17355,933.42343 129.22164,933.56747 C 129.24556,933.63144 129.2695,933.78732 129.29343,934.03512 C 129.29343,934.21921 129.28341,934.37527 129.2634,934.50332 C 129.24338,934.63138 129.20139,934.76742 129.13742,934.91146 L 128.5134,934.91146 C 128.48946,934.84726 128.4515,934.79318 128.39951,934.74923 C 128.3475,934.70529 128.32149,934.48337 128.32151,934.08346 C 128.32149,933.9714 128.32149,933.85531 128.32151,933.73519 C 128.29757,933.67123 128.26157,933.63925 128.21347,933.63925 C 128.13363,933.63925 128.03366,933.73526 127.91354,933.92727 C 127.79343,934.11929 127.72141,934.28732 127.69747,934.43136 C 127.67355,934.6152 127.71761,934.79123 127.82968,934.95944 C 127.90951,935.07931 128.05344,935.22323 128.26145,935.3912 C 128.46945,935.55917 128.68552,935.72714 128.90964,935.89511 C 129.16549,936.12728 129.29343,936.3674 129.29343,936.61544 C 129.29343,936.92745 129.15347,937.21145 128.87357,937.46743 C 128.59366,937.72341 128.32968,937.8514 128.08164,937.8514 C 127.89755,937.8514 127.72549,937.81539 127.56546,937.74337 C 127.40543,937.67135 127.16146,937.51132 126.83358,937.26327 L 126.83358,937.26327 z M 130.2789,937.26327 C 130.18295,937.19931 130.13497,937.09933 130.13497,936.96334 C 130.13497,936.88327 130.15896,936.80722 130.20694,936.73519 C 130.25492,936.66317 130.31289,936.60916 130.38089,936.57315 C 130.44888,936.53714 130.51486,936.53524 130.57882,936.56747 C 130.78683,936.70346 130.94284,936.80343 131.04685,936.8674 C 131.24679,936.99533 131.39475,937.05929 131.49069,937.05929 C 131.5947,937.05929 131.65872,937.02127 131.68277,936.94522 C 131.70682,936.86917 131.71884,936.81918 131.71884,936.79525 C 131.71884,936.75521 131.71884,936.72726 131.71884,936.71139 C 131.71884,936.54342 131.6268,936.37936 131.44271,936.2192 C 131.26668,936.08322 131.09268,935.94522 130.92068,935.8052 C 130.74868,935.66519 130.61673,935.52719 130.52481,935.3912 C 130.43288,935.25522 130.36893,935.09921 130.33292,934.92318 C 130.29691,934.74716 130.2789,934.59518 130.2789,934.46725 C 130.2789,934.05929 130.39487,933.6893 130.6268,933.35726 C 130.85873,933.02524 131.15475,932.85922 131.51486,932.85922 C 131.61886,932.85922 131.68283,932.85922 131.70676,932.85922 C 131.76291,932.85922 131.80294,932.86728 131.82688,932.88339 L 132.40293,933.23129 C 132.53084,933.31137 132.61886,933.42343 132.66696,933.56747 C 132.69089,933.63144 132.71481,933.78732 132.73873,934.03512 C 132.73873,934.21921 132.72872,934.37527 132.70871,934.50332 C 132.68868,934.63138 132.64669,934.76742 132.58274,934.91146 L 131.95871,934.91146 C 131.93478,934.84726 131.89682,934.79318 131.84482,934.74923 C 131.79282,934.70529 131.76682,934.48337 131.76682,934.08346 C 131.76682,933.9714 131.76682,933.85531 131.76682,933.73519 C 131.74289,933.67123 131.70687,933.63925 131.65878,933.63925 C 131.57895,933.63925 131.47897,933.73526 131.35886,933.92727 C 131.23873,934.11929 131.16672,934.28732 131.14279,934.43136 C 131.11886,934.6152 131.16293,934.79123 131.275,934.95944 C 131.35483,935.07931 131.49875,935.22323 131.70676,935.3912 C 131.91476,935.55917 132.13083,935.72714 132.35495,935.89511 C 132.6108,936.12728 132.73873,936.3674 132.73873,936.61544 C 132.73873,936.92745 132.59878,937.21145 132.31887,937.46743 C 132.03897,937.72341 131.77499,937.8514 131.52695,937.8514 C 131.34287,937.8514 131.17081,937.81539 131.01077,937.74337 C 130.85074,937.67135 130.60677,937.51132 130.2789,937.26327 L 130.2789,937.26327 z M 145.64951,931.63534 C 145.6014,932.07529 145.41745,932.48727 145.09762,932.8713 C 144.84152,933.17526 144.45345,933.50326 143.93344,933.85531 L 143.41745,934.20321 L 145.36167,937.13143 C 145.37752,937.21127 145.38546,937.2712 145.38547,937.31124 C 145.38546,937.51119 145.29745,937.6672 145.12143,937.77926 C 145.03354,937.82736 144.94955,937.8514 144.86947,937.8514 C 144.74959,937.8514 144.63961,937.82137 144.53951,937.76132 C 144.43941,937.70126 144.34945,937.6152 144.26962,937.50314 L 141.84567,934.22738 L 141.78562,937.58737 C 141.78561,937.70724 141.68955,937.76718 141.49741,937.76718 C 141.38558,937.76718 141.29757,937.75118 141.23336,937.7192 C 141.0815,937.67135 140.94956,937.62539 140.8375,937.58132 C 140.72543,937.53726 140.6694,937.41525 140.66941,937.2153 L 140.69358,930.0632 C 140.69357,929.91135 140.71554,929.7814 140.75949,929.67336 C 140.80344,929.56534 140.8895,929.48337 141.01766,929.42745 C 141.08164,929.40329 141.14963,929.39121 141.22164,929.3912 C 141.39767,929.39121 141.53769,929.45529 141.64169,929.58346 C 141.84969,929.47946 142.03769,929.41342 142.20566,929.38534 C 142.37363,929.35727 142.60556,929.34323 142.90145,929.34323 L 143.52548,929.34323 C 144.03744,929.34323 144.52144,929.56723 144.97751,930.01522 C 145.43356,930.46323 145.66159,930.95126 145.66159,931.47933 C 145.65353,931.55136 145.6495,931.60336 145.64951,931.63534 L 145.64951,931.63534 z M 141.86947,933.48324 C 142.29354,933.37924 142.61758,933.24124 142.84159,933.06924 C 143.06557,932.89725 143.24959,932.75522 143.39364,932.64315 C 143.70566,932.39535 143.95163,932.11942 144.13155,931.81533 C 144.31149,931.51126 144.40145,931.19919 144.40145,930.87911 C 144.40145,930.68723 144.30544,930.54129 144.11344,930.44131 C 143.92141,930.34134 143.68538,930.29135 143.40537,930.29135 C 143.07747,930.29135 142.76552,930.34336 142.46952,930.44735 C 142.17348,930.55136 141.99752,930.67929 141.94162,930.83114 L 141.86947,933.48324 z M 147.50216,937.62325 C 147.1423,937.47921 146.87833,937.25119 146.71024,936.93917 C 146.54215,936.62716 146.4581,936.25521 146.4581,935.82333 C 146.4581,935.71933 146.4581,935.63131 146.4581,935.55929 C 146.4581,935.48727 146.47409,935.36325 146.50608,935.18722 C 146.52219,934.89132 146.53817,934.65133 146.55405,934.46725 C 146.61826,933.83517 146.87436,933.17917 147.32236,932.49923 C 147.3702,932.41916 147.4421,932.37912 147.53806,932.37911 C 147.59421,932.37912 147.7103,932.41513 147.88631,932.48715 C 148.06234,932.55917 148.19833,932.59518 148.29427,932.59518 C 148.75034,932.59518 149.09432,932.85922 149.32627,933.38729 C 149.52621,933.84335 149.62618,934.42331 149.62618,935.12716 C 149.62618,935.84713 149.53414,936.43112 149.35007,936.87911 C 149.12618,937.4233 148.7822,937.75533 148.31808,937.87521 C 148.23825,937.89132 148.18625,937.89938 148.16208,937.89938 C 148.09811,937.89938 148.03817,937.88339 147.98227,937.8514 C 147.92636,937.81942 147.87033,937.78744 147.81418,937.75546 L 147.50216,937.62325 z M 148.03025,933.43527 C 147.91012,933.69919 147.79208,933.96518 147.67612,934.23324 C 147.56015,934.50131 147.50216,934.83127 147.50216,935.22311 C 147.50216,935.34323 147.49019,935.51931 147.46627,935.75137 C 147.44235,935.98343 147.43039,936.15145 147.43039,936.25546 C 147.43039,936.45541 147.46035,936.62539 147.5203,936.76541 C 147.58023,936.90542 147.69016,937.01937 147.85007,937.10726 C 147.97824,937.17929 148.11826,937.01132 148.27011,936.60336 C 148.38217,936.29135 148.47421,935.91134 148.54623,935.46334 C 148.57015,935.3193 148.58212,935.16732 148.58212,935.00741 C 148.58212,934.62338 148.53011,934.25137 148.42612,933.89138 C 148.3221,933.5314 148.22214,933.35141 148.12618,933.3514 C 148.08615,933.35141 148.05417,933.37936 148.03025,933.43527 L 148.03025,933.43527 z M 151.76157,937.77926 C 151.64145,937.77926 151.54147,937.75521 151.46164,937.70712 L 151.05331,937.45516 C 150.98154,937.41513 150.92362,937.36715 150.87955,937.31124 C 150.83548,937.25534 150.78146,937.16732 150.7175,937.04721 C 150.6135,936.84725 150.56149,936.64328 150.5615,936.43527 L 150.72959,933.02731 C 150.72959,932.94723 150.78159,932.9072 150.88558,932.90719 C 150.93344,932.9072 150.99741,932.91721 151.07748,932.93722 C 151.15756,932.95724 151.23959,932.97726 151.32358,932.99728 C 151.40756,933.0173 151.50949,933.07529 151.62937,933.17123 L 151.46164,935.79916 C 151.46164,936.23935 151.48557,936.56344 151.53341,936.77145 C 151.58956,936.84323 151.6456,936.91122 151.7015,936.97543 C 151.97348,936.78329 152.14945,936.61526 152.2294,936.47134 C 152.30936,936.32742 152.34932,936.17538 152.34933,936.01522 L 152.4094,932.67941 L 152.72141,932.64315 C 153.01755,932.64316 153.27353,932.74716 153.48935,932.95516 L 153.47763,937.83932 C 153.40561,937.8713 153.32149,937.88729 153.2253,937.88729 C 153.20138,937.88729 153.14742,937.87728 153.06345,937.85726 C 152.97946,937.83724 152.90347,937.80721 152.83548,937.76718 C 152.76748,937.72714 152.72946,937.6672 152.72141,937.58737 L 152.64963,937.08346 L 152.13363,937.63534 C 152.03744,937.73129 151.91342,937.77926 151.76157,937.77926 L 151.76157,937.77926 z M 155.04757,933.75936 L 154.85567,933.66342 L 154.66342,933.66342 L 154.48361,933.43527 L 154.45944,932.85922 L 155.07174,932.72738 L 155.13144,930.44735 C 155.2596,930.41538 155.38363,930.39939 155.50351,930.39938 C 155.57552,930.39939 155.66153,930.40738 155.7615,930.42336 C 155.86148,930.43936 155.99545,930.4874 156.16342,930.56747 L 156.13961,932.60726 L 156.6677,932.60726 L 156.83542,932.91928 L 156.8237,933.49533 L 156.0195,933.57919 L 156.0195,937.75546 C 155.93161,937.77938 155.85959,937.79135 155.80344,937.79135 C 155.74752,937.79135 155.68154,937.78134 155.60549,937.76132 C 155.52945,937.7413 155.45553,937.72323 155.38376,937.70712 C 155.10372,937.62728 154.96372,937.4714 154.96372,937.23947 L 155.04757,933.75936 z M 160.42649,933.78317 L 160.49826,935.22311 L 158.79427,935.49923 C 158.65048,935.53122 158.55454,935.56723 158.50644,935.60726 C 158.40243,935.68734 158.35043,935.7994 158.35044,935.94345 L 158.37423,936.49533 C 158.37423,936.6152 158.41226,936.72518 158.4883,936.82528 C 158.56436,936.92538 158.65438,936.9714 158.75839,936.96334 C 158.98251,936.93136 159.26254,936.75534 159.59848,936.43527 C 159.93442,936.1152 160.08639,935.91916 160.05442,935.84713 C 160.08639,935.83126 160.1384,935.82333 160.21042,935.82333 C 160.3464,935.82333 160.44638,935.86734 160.51035,935.95535 C 160.57431,936.04336 160.60629,936.13534 160.6063,936.23129 C 160.60629,936.27133 160.59432,936.32333 160.5704,936.38729 C 160.52231,936.57138 160.45431,936.73141 160.36642,936.8674 C 160.32638,936.93136 160.21431,937.07138 160.03025,937.28744 C 159.87839,937.46322 159.72446,937.59115 159.56844,937.67123 C 159.41244,937.75131 159.2264,937.79135 159.01035,937.79135 C 158.8663,937.79135 158.74831,937.77731 158.65641,937.74923 C 158.56448,937.72116 158.47043,937.6672 158.37423,937.58737 L 157.75057,937.0234 C 157.7264,937.00729 157.70236,936.97122 157.67844,936.91519 C 157.65451,936.85916 157.63449,936.81515 157.61838,936.78317 C 157.56247,936.63937 157.53451,936.48739 157.53451,936.32723 L 157.53451,935.3912 C 157.53451,934.78329 157.66849,934.1553 157.93643,933.50723 C 158.20437,932.85916 158.49033,932.53513 158.79427,932.53512 C 158.84238,932.53513 158.87839,932.53915 158.90232,932.54721 C 159.05441,932.59531 159.24844,932.63132 159.48441,932.65524 C 159.72037,932.67917 159.90438,932.76315 160.03646,932.90719 C 160.16854,933.05124 160.26657,933.18924 160.33053,933.32119 C 160.3945,933.45315 160.42648,933.60715 160.42649,933.78317 L 160.42649,933.78317 z M 159.55051,933.77145 C 159.55051,933.63547 159.52451,933.51547 159.47251,933.41146 C 159.4205,933.30746 159.33847,933.23935 159.2264,933.20712 C 159.10629,933.1832 158.99435,933.31125 158.8906,933.59127 C 158.81857,933.79123 158.77048,933.93124 158.74631,934.01132 C 158.68233,934.17929 158.63437,934.32327 158.60238,934.44326 C 158.5704,934.56326 158.55441,934.69125 158.55442,934.82723 L 159.55051,934.59945 L 159.55051,933.77145 z M 161.68845,932.8713 L 161.79648,932.73947 L 162.0726,932.73947 C 162.13657,932.73947 162.21053,932.77743 162.29452,932.85336 C 162.37851,932.92929 162.44455,932.97531 162.49265,932.99142 C 162.60446,933.02341 162.69638,932.93741 162.76839,932.73342 C 162.84042,932.52945 162.92641,932.41342 163.0264,932.38534 C 163.12636,932.35727 163.19638,932.34323 163.23641,932.34323 C 163.38852,932.34323 163.52255,932.39725 163.63852,932.50527 C 163.75449,932.61331 163.81247,932.74326 163.81247,932.89511 L 163.80039,933.36312 C 163.80038,933.5953 163.77237,933.80539 163.71634,933.99337 C 163.6603,934.18136 163.57236,934.27536 163.45248,934.27535 C 163.26839,934.27536 163.14437,934.0953 163.08042,933.73519 C 163.04843,933.55917 162.9924,933.47116 162.91233,933.47116 C 162.84054,933.47116 162.78261,933.53116 162.73855,933.65115 C 162.69449,933.77115 162.67246,934.0112 162.67246,934.3713 C 162.67246,934.48337 162.67246,934.58139 162.67246,934.66537 C 162.67246,934.74936 162.67246,934.81527 162.67246,934.86312 L 162.67246,937.79135 C 162.58456,937.83138 162.48459,937.8514 162.37252,937.8514 C 162.30051,937.8514 162.2125,937.83938 162.10849,937.81533 C 162.00449,937.79128 161.90451,937.73324 161.80857,937.6412 C 161.71261,937.54916 161.66464,937.43124 161.66464,937.28744 L 161.68845,932.8713 z"
+ id="text3253" />
+ <path
+ style="fill:#ececec;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3304)"
+ d="M 62.895745,955.18402 C 62.360025,954.46973 57.538595,951.43402 57.181455,948.04116 C 56.824315,944.6483 57.895745,913.75545 57.895745,913.75545 C 57.895745,913.75545 60.217165,909.11259 62.181455,908.57688 C 64.145745,908.04116 65.217165,907.50545 65.217165,907.50545 L 53.610025,904.82688 L 50.931455,901.43402 L 51.467165,913.93402 L 52.360025,944.6483 C 52.360025,944.6483 51.645745,947.68402 50.395745,948.04116 C 49.145745,948.3983 53.074315,953.57688 53.967165,953.93402 C 54.860025,954.29116 62.895745,955.54116 62.895745,955.18402 z"
+ id="path3282" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#fdfdfd;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;filter:url(#filter3368)"
+ d="M 47.895745,901.79116 C 47.895745,901.79116 51.288595,907.68402 54.502885,908.04116 C 57.717165,908.3983 64.681455,909.6483 68.967165,909.6483 C 73.252885,909.6483 73.252885,909.6483 73.252885,909.6483"
+ id="path3284" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#fdfdfd;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 76.467165,910.00545 L 264.32431,909.29116"
+ id="path3286" />
+ <path
+ style="fill:#2c2c2c;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 59.598995,868.26188 L 91.671345,744.01311 C 91.671345,744.01311 93.439105,737.19458 100.76272,733.65905 C 108.08633,730.12352 119.45054,729.61844 119.45054,729.61844 C 119.45054,729.61844 522.5014,731.13367 523.51155,731.13367 C 524.5217,731.13367 538.91638,733.91159 542.19938,737.19458 C 545.48237,740.47758 548.51283,747.54865 548.51283,747.54865 L 575.02933,869.52457 C 575.02933,869.52457 576.03949,876.3431 573.76664,877.35325 C 571.4938,878.3634 564.92782,878.3634 564.92782,878.3634 L 65.407375,874.82786 C 65.407375,874.82786 60.609145,873.56518 59.851535,872.30249 C 59.093915,871.0398 59.851535,868.51442 59.598995,868.26188 z"
+ id="path3752"
+ sodipodi:nodetypes="ccscssccsccsc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#868686;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;filter:url(#filter3982)"
+ d="M 59.346455,869.77711 C 59.346455,869.77711 59.598995,872.30249 61.366765,873.0601 C 63.134535,873.81772 67.175145,873.81772 67.175145,873.81772 L 570.23111,877.85833 C 570.23111,877.85833 573.00902,878.11086 574.52425,876.3431 C 576.03949,874.57533 575.53441,870.02964 575.53441,870.02964"
+ id="path3754" />
+ <path
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3962)"
+ d="M 163.96716,740.00545 L 162.18145,748.13045 L 166.02075,748.13045 L 168.07432,740.18402 L 163.96716,740.00545 z"
+ id="path3810" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#494949;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3958)"
+ d="M 168.69932,739.20188 C 168.25288,739.20188 163.7886,739.0233 163.7886,739.0233"
+ id="path3812" />
+ <path
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3954)"
+ d="M 189.36894,739.91617 L 188.29753,748.13046 L 192.13682,748.13046 L 193.4761,740.09474 L 189.36894,739.91617 z"
+ id="path3814"
+ sodipodi:nodetypes="ccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#494949;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3950)"
+ d="M 193.92253,739.1126 C 193.4761,739.1126 189.01181,738.93402 189.01181,738.93402"
+ id="path3816" />
+ <path
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3946)"
+ d="M 215.44037,739.46974 L 214.45824,747.59474 L 218.29752,747.59474 L 219.54752,739.64831 L 215.44037,739.46974 z"
+ id="path3818"
+ sodipodi:nodetypes="ccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#494949;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3942)"
+ d="M 220.17252,738.66617 C 219.7261,738.66617 215.26181,738.48759 215.26181,738.48759"
+ id="path3820" />
+ <path
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3938)"
+ d="M 241.06539,740.00545 L 240.17254,748.13045 L 244.01183,748.13045 L 245.17254,740.18402 L 241.06539,740.00545 z"
+ id="path3822"
+ sodipodi:nodetypes="ccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#494949;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3934)"
+ d="M 245.79754,739.20188 C 245.3511,739.20188 240.88681,739.0233 240.88681,739.0233"
+ id="path3824" />
+ <path
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3930)"
+ d="M 266.33324,739.64831 L 265.79752,748.39831 L 269.63681,748.39831 L 270.44038,739.82688 L 266.33324,739.64831 z"
+ id="path3826"
+ sodipodi:nodetypes="ccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#494949;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3926)"
+ d="M 271.06538,738.84474 C 270.61895,738.84474 266.15466,738.66616 266.15466,738.66616"
+ id="path3828" />
+ <path
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3922)"
+ d="M 291.95824,740.36259 L 291.69039,748.75545 L 295.52968,748.75545 L 296.06539,740.54116 L 291.95824,740.36259 z"
+ id="path3830"
+ sodipodi:nodetypes="ccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#494949;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3918)"
+ d="M 296.69039,739.55902 C 296.24397,739.55902 291.77967,739.38044 291.77967,739.38044"
+ id="path3832" />
+ <path
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3914)"
+ d="M 318.11895,740.63045 L 317.76181,749.20188 L 321.6011,749.20188 L 322.2261,740.80902 L 318.11895,740.63045 z"
+ id="path3834"
+ sodipodi:nodetypes="ccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#494949;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3910)"
+ d="M 322.8511,739.82688 C 322.40467,739.82688 317.94038,739.6483 317.94038,739.6483"
+ id="path3836" />
+ <path
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3906)"
+ d="M 343.56537,740.63045 L 343.65466,748.84474 L 347.49395,748.84474 L 347.67252,740.80902 L 343.56537,740.63045 z"
+ id="path3838"
+ sodipodi:nodetypes="ccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#494949;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3902)"
+ d="M 348.29752,739.82688 C 347.85109,739.82688 343.3868,739.6483 343.3868,739.6483"
+ id="path3840" />
+ <path
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3898)"
+ d="M 369.81537,740.36259 L 369.81537,748.93402 L 373.65466,748.93402 L 373.92252,740.54116 L 369.81537,740.36259 z"
+ id="path3842"
+ sodipodi:nodetypes="ccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#494949;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3894)"
+ d="M 374.54752,739.55902 C 374.10109,739.55902 369.6368,739.38044 369.6368,739.38044"
+ id="path3844" />
+ <path
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3890)"
+ d="M 394.27966,740.98759 L 394.99395,749.38045 L 398.83324,749.38045 L 398.38681,741.16616 L 394.27966,740.98759 z"
+ id="path3846"
+ sodipodi:nodetypes="ccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#494949;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3886)"
+ d="M 399.01181,740.18402 C 398.56538,740.18402 394.10109,740.00544 394.10109,740.00544"
+ id="path3848" />
+ <path
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3882)"
+ d="M 420.61895,740.63045 L 421.24395,749.02331 L 425.08324,749.02331 L 424.7261,740.80902 L 420.61895,740.63045 z"
+ id="path3850"
+ sodipodi:nodetypes="ccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#494949;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3878)"
+ d="M 425.3511,739.82688 C 424.90467,739.82688 420.44038,739.6483 420.44038,739.6483"
+ id="path3852" />
+ <path
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3874)"
+ d="M 446.15466,741.34473 L 447.13681,749.6483 L 450.9761,749.6483 L 450.26181,741.5233 L 446.15466,741.34473 z"
+ id="path3854"
+ sodipodi:nodetypes="ccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#494949;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3870)"
+ d="M 450.88681,740.54116 C 450.44038,740.54116 445.97609,740.36258 445.97609,740.36258"
+ id="path3856" />
+ <path
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3866)"
+ d="M 472.1368,741.07688 L 473.20823,749.55902 L 477.04752,749.55902 L 476.24396,741.25545 L 472.1368,741.07688 z"
+ id="path3858"
+ sodipodi:nodetypes="ccccc" />
+ <path
+ style="fill:none;fill-rule:evenodd;stroke:#494949;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3862)"
+ d="M 476.86896,740.27331 C 476.42252,740.27331 471.95823,740.09473 471.95823,740.09473"
+ id="path3860" />
+ <path
+ style="fill:#010101;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3996)"
+ d="M 457.00288,731.43402 L 458.43145,635.00545 L 457.71716,507.86259 C 457.71716,507.86259 460.10513,497.86259 471.28859,497.1483 C 478.45249,496.69074 482.71717,509.29116 482.71717,509.29116 L 482.71717,651.43402 L 484.14574,731.43402 L 457.00288,731.43402 z"
+ id="path3986"
+ sodipodi:nodetypes="cccscccc" />
+ </g>
+</svg>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/group.svg b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/group.svg
new file mode 100755
index 0000000..4ea959b
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/group.svg
@@ -0,0 +1,616 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+<svg
+ xmlns:dc="http://purl.org/dc/elements/1.1/"
+ xmlns:cc="http://creativecommons.org/ns#"
+ xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+ xmlns:svg="http://www.w3.org/2000/svg"
+ xmlns="http://www.w3.org/2000/svg"
+ xmlns:xlink="http://www.w3.org/1999/xlink"
+ xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+ xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+ height="160.00000"
+ id="Andysvg"
+ inkscape:version="0.46"
+ sodipodi:docbase="/home/andy/Desktop/etiquette-icons-0.4/scalable/filesystems"
+ sodipodi:docname="gnome-fs-network.svg"
+ sodipodi:version="0.32"
+ version="1.0"
+ width="160.00000"
+ x="0.00000000"
+ y="0.00000000"
+ inkscape:output_extension="org.inkscape.output.svg.inkscape"
+ inkscape:export-filename="C:\Documents and Settings\All Users\Documents\Ubuntu Brig\Andy Fitzsimon\gnome-fs-network.png"
+ inkscape:export-xdpi="90"
+ inkscape:export-ydpi="90">
+ <metadata
+ id="metadata3">
+ <rdf:RDF>
+ <cc:Work
+ rdf:about="">
+ <dc:title>Etiquette Icons</dc:title>
+ <dc:description />
+ <dc:subject>
+ <rdf:Bag>
+ <rdf:li>hash</rdf:li>
+ <rdf:li />
+ <rdf:li>filesystem</rdf:li>
+ <rdf:li>computer</rdf:li>
+ <rdf:li>icons</rdf:li>
+ </rdf:Bag>
+ </dc:subject>
+ <dc:publisher>
+ <cc:Agent
+ rdf:about="http://www.openclipart.org">
+ <dc:title>Andy Fitzsimon</dc:title>
+ </cc:Agent>
+ </dc:publisher>
+ <dc:creator>
+ <cc:Agent>
+ <dc:title>Andy Fitzsimon</dc:title>
+ </cc:Agent>
+ </dc:creator>
+ <dc:rights>
+ <cc:Agent>
+ <dc:title>Andy Fitzsimon</dc:title>
+ </cc:Agent>
+ </dc:rights>
+ <dc:date />
+ <dc:format>image/svg+xml</dc:format>
+ <dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+ <cc:license
+ rdf:resource="http://web.resource.org/cc/PublicDomain" />
+ <dc:language>en</dc:language>
+ </cc:Work>
+ <cc:License
+ rdf:about="http://web.resource.org/cc/PublicDomain">
+ <cc:permits
+ rdf:resource="http://web.resource.org/cc/Reproduction" />
+ <cc:permits
+ rdf:resource="http://web.resource.org/cc/Distribution" />
+ <cc:permits
+ rdf:resource="http://web.resource.org/cc/DerivativeWorks" />
+ </cc:License>
+ </rdf:RDF>
+ </metadata>
+ <defs
+ id="defs3">
+ <inkscape:perspective
+ sodipodi:type="inkscape:persp3d"
+ inkscape:vp_x="0 : 80 : 1"
+ inkscape:vp_y="0 : 1000 : 0"
+ inkscape:vp_z="160 : 80 : 1"
+ inkscape:persp3d-origin="80 : 53.333333 : 1"
+ id="perspective97" />
+ <linearGradient
+ id="linearGradient4894">
+ <stop
+ id="stop4895"
+ offset="0.0000000"
+ style="stop-color:#ffffff;stop-opacity:1.0000000;" />
+ <stop
+ id="stop4896"
+ offset="0.47000000"
+ style="stop-color:#ffffff;stop-opacity:0.85567009;" />
+ <stop
+ id="stop4897"
+ offset="1.0000000"
+ style="stop-color:#ffffff;stop-opacity:0.0000000;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient1853">
+ <stop
+ id="stop1854"
+ offset="0.0000000"
+ style="stop-color:#ffffff;stop-opacity:1.0000000;" />
+ <stop
+ id="stop1855"
+ offset="0.47000000"
+ style="stop-color:#ffffff;stop-opacity:0.85567009;" />
+ <stop
+ id="stop1856"
+ offset="1.0000000"
+ style="stop-color:#ffffff;stop-opacity:0.0000000;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient1806">
+ <stop
+ id="stop1807"
+ offset="0.0000000"
+ style="stop-color:#000000;stop-opacity:0.35051546;" />
+ <stop
+ id="stop3276"
+ offset="0.64999998"
+ style="stop-color:#000000;stop-opacity:0.13402061;" />
+ <stop
+ id="stop1808"
+ offset="1.0000000"
+ style="stop-color:#000000;stop-opacity:0.0000000;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient893">
+ <stop
+ id="stop895"
+ offset="0"
+ style="stop-color:#000;stop-opacity:1;" />
+ <stop
+ id="stop896"
+ offset="1"
+ style="stop-color:#fff;stop-opacity:1;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient1317">
+ <stop
+ id="stop1318"
+ offset="0.00000000"
+ style="stop-color:#000000;stop-opacity:0.52892560;" />
+ <stop
+ id="stop1320"
+ offset="0.50000000"
+ style="stop-color:#000000;stop-opacity:0.17355372;" />
+ <stop
+ id="stop1319"
+ offset="1.0000000"
+ style="stop-color:#000000;stop-opacity:0.00000000;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient1133">
+ <stop
+ id="stop1134"
+ offset="0.00000000"
+ style="stop-color:#8bb7df;stop-opacity:1.0000000;" />
+ <stop
+ id="stop1136"
+ offset="0.76209301"
+ style="stop-color:#2a6092;stop-opacity:1.0000000;" />
+ <stop
+ id="stop1135"
+ offset="1.0000000"
+ style="stop-color:#375e82;stop-opacity:1.0000000;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient1098">
+ <stop
+ id="stop1099"
+ offset="0.00000000"
+ style="stop-color:#ffffff;stop-opacity:1.0000000;" />
+ <stop
+ id="stop1101"
+ offset="0.50000000"
+ style="stop-color:#ffffff;stop-opacity:0.22314049;" />
+ <stop
+ id="stop1102"
+ offset="0.59930235"
+ style="stop-color:#ffffff;stop-opacity:0.00000000;" />
+ <stop
+ id="stop1100"
+ offset="1.0000000"
+ style="stop-color:#ffffff;stop-opacity:0.60330576;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient902">
+ <stop
+ id="stop903"
+ offset="0.00000000"
+ style="stop-color:#000000;stop-opacity:0.00000000;" />
+ <stop
+ id="stop904"
+ offset="1.0000000"
+ style="stop-color:#000000;stop-opacity:0.22000000;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient892">
+ <stop
+ id="stop893"
+ offset="0.0000000"
+ style="stop-color:#ffffff;stop-opacity:0.0000000;" />
+ <stop
+ id="stop894"
+ offset="1"
+ style="stop-color:#fff;stop-opacity:1;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient888">
+ <stop
+ id="stop889"
+ offset="0.0000000"
+ style="stop-color:#626262;stop-opacity:1.0000000;" />
+ <stop
+ id="stop890"
+ offset="1"
+ style="stop-color:#fff;stop-opacity:1;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient891"
+ x1="1.3485916"
+ x2="0.024647888"
+ xlink:href="#linearGradient888"
+ y1="-0.85185188"
+ y2="1.0899471" />
+ <linearGradient
+ id="linearGradient901"
+ spreadMethod="pad"
+ x1="1.5803921"
+ x2="0.14117648"
+ xlink:href="#linearGradient888"
+ y1="2.4285715"
+ y2="-0.38571429" />
+ <linearGradient
+ id="linearGradient905"
+ x1="-1.5389611"
+ x2="1.0909091"
+ xlink:href="#linearGradient888"
+ y1="2.7890625"
+ y2="-0.19531250" />
+ <radialGradient
+ cx="0.10362694"
+ cy="0.093750000"
+ fx="0.10362694"
+ fy="0.093750000"
+ id="radialGradient1132"
+ r="1.2958785"
+ xlink:href="#linearGradient1133" />
+ <linearGradient
+ id="linearGradient1138"
+ xlink:href="#linearGradient4894" />
+ <linearGradient
+ id="linearGradient1140"
+ x1="0.54117650"
+ x2="0.57647061"
+ xlink:href="#linearGradient888"
+ y1="-2.4210527"
+ y2="4.6315789" />
+ <linearGradient
+ id="linearGradient1141"
+ x1="1.8281938"
+ x2="-0.0088105723"
+ xlink:href="#linearGradient888"
+ y1="3.0546875"
+ y2="-0.44531250" />
+ <linearGradient
+ id="linearGradient1144"
+ x1="0.21960784"
+ x2="0.59607846"
+ xlink:href="#linearGradient1853"
+ y1="-11.111111"
+ y2="5.2777777" />
+ <linearGradient
+ id="linearGradient1146"
+ x1="0.51351351"
+ x2="-0.076576576"
+ xlink:href="#linearGradient892"
+ y1="0.55468750"
+ y2="1.1875000" />
+ <linearGradient
+ id="linearGradient1148"
+ x1="0.23245615"
+ x2="1.0789474"
+ xlink:href="#linearGradient892"
+ y1="0.15625000"
+ y2="-0.64843750" />
+ <linearGradient
+ id="linearGradient1150"
+ x1="0.25221238"
+ x2="-0.57522124"
+ xlink:href="#linearGradient892"
+ y1="0.57812500"
+ y2="1.4765625" />
+ <linearGradient
+ id="linearGradient1156"
+ x1="0.48260871"
+ x2="0.48260871"
+ xlink:href="#linearGradient888"
+ y1="-0.40000001"
+ y2="1.8750000" />
+ <linearGradient
+ id="linearGradient1157"
+ x1="1.5528169"
+ x2="-1.2077465"
+ xlink:href="#linearGradient888"
+ y1="3.3265307"
+ y2="-0.48979592" />
+ <linearGradient
+ id="linearGradient1166"
+ x1="0.52941179"
+ x2="0.57647061"
+ xlink:href="#linearGradient1317"
+ y1="-3.5714285"
+ y2="4.6315789" />
+ <linearGradient
+ id="linearGradient1167"
+ x1="1.6111112"
+ x2="-0.083333336"
+ xlink:href="#linearGradient888"
+ y1="3.0703125"
+ y2="0.046875000" />
+ <linearGradient
+ id="linearGradient1169"
+ x1="1.4780220"
+ x2="-0.13028169"
+ xlink:href="#linearGradient893"
+ y1="2.9218750"
+ y2="-0.26732674" />
+ <linearGradient
+ gradientTransform="scale(0.998371,1.001632)"
+ id="linearGradient1170"
+ x1="0.47284532"
+ x2="0.48655096"
+ xlink:href="#linearGradient902"
+ y1="-0.016295359"
+ y2="1.8378206" />
+ <linearGradient
+ id="linearGradient1171"
+ x1="0.83050847"
+ x2="0.56355929"
+ xlink:href="#linearGradient902"
+ y1="0.57812500"
+ y2="0.36718750" />
+ <radialGradient
+ cx="0.088082902"
+ cy="0.093750000"
+ fx="0.090673581"
+ fy="0.10937500"
+ id="radialGradient1315"
+ r="1.1765809"
+ xlink:href="#linearGradient1133" />
+ <radialGradient
+ cx="0.50000000"
+ cy="0.50000006"
+ fx="0.50352114"
+ fy="0.18269235"
+ id="radialGradient1316"
+ r="0.34964636"
+ xlink:href="#linearGradient1317" />
+ <linearGradient
+ id="linearGradient1404"
+ x1="0.53169012"
+ x2="0.54577464"
+ xlink:href="#linearGradient892"
+ y1="0.28888890"
+ y2="1.1000000" />
+ <linearGradient
+ gradientTransform="scale(0.997825,1.002180)"
+ id="linearGradient1505"
+ x1="0.47157744"
+ x2="0.48548824"
+ xlink:href="#linearGradient902"
+ y1="-0.024853170"
+ y2="1.8570156" />
+ <linearGradient
+ gradientTransform="scale(0.995847,1.004170)"
+ id="linearGradient1506"
+ x1="0.47042510"
+ x2="0.48481107"
+ xlink:href="#linearGradient902"
+ y1="-0.043652620"
+ y2="1.9025002" />
+ <linearGradient
+ gradientTransform="scale(0.997153,1.002855)"
+ id="linearGradient2740"
+ x1="0.47041038"
+ x2="0.48453596"
+ xlink:href="#linearGradient902"
+ y1="-0.033741195"
+ y2="1.8771822" />
+ <linearGradient
+ id="linearGradient4283"
+ x1="-0.77314812"
+ x2="0.99074072"
+ xlink:href="#linearGradient893"
+ y1="2.0837989"
+ y2="-0.033519555" />
+ <linearGradient
+ id="linearGradient4284"
+ x1="-2.3960868e-17"
+ x2="0.92957747"
+ xlink:href="#linearGradient893"
+ y1="3.3012049"
+ y2="-0.45783132" />
+ <radialGradient
+ cx="0.50000000"
+ cy="0.50000000"
+ fx="0.50000000"
+ fy="0.50000000"
+ id="radialGradient1977"
+ r="0.50000000"
+ xlink:href="#linearGradient1853" />
+ </defs>
+ <sodipodi:namedview
+ bordercolor="#666666"
+ borderopacity="1.0"
+ id="base"
+ inkscape:cx="62.122256"
+ inkscape:cy="81.091465"
+ inkscape:pageopacity="0.0"
+ inkscape:pageshadow="2"
+ inkscape:window-height="667"
+ inkscape:window-width="573"
+ inkscape:window-x="380"
+ inkscape:window-y="151"
+ inkscape:zoom="2"
+ pagecolor="#ffffff"
+ showborder="true"
+ showgrid="false"
+ inkscape:current-layer="Andysvg" />
+ <path
+ d="M 26.564473,83.749649 L 26.564473,121.41271 L 57.756286,121.41271"
+ id="path3723"
+ sodipodi:nodetypes="ccc"
+ style="fill:none;fill-rule:evenodd;stroke:#9c9c9c;stroke-width:5.7184987;stroke-linecap:round;stroke-linejoin:round;" />
+ <g
+ id="g2843"
+ transform="matrix(0.999379,0.000000,0.000000,0.999379,1.227893e-3,3.986513)">
+ <rect
+ height="8.3153667"
+ id="rect1906"
+ style="fill:url(#linearGradient1156);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient1157);stroke-width:1.4473482pt;"
+ transform="matrix(0.716224,0.000000,0.000000,0.716224,-12.57051,-9.652832)"
+ width="57.567924"
+ x="33.326111"
+ y="78.658051" />
+ <rect
+ height="60.126495"
+ id="rect1907"
+ rx="5.4369707"
+ ry="5.4369707"
+ style="fill:url(#linearGradient905);fill-opacity:1;fill-rule:evenodd;stroke-width:1.6282668;"
+ transform="matrix(0.716224,0.000000,0.000000,0.716224,-12.57051,-9.652832)"
+ width="72.279724"
+ x="26.015469"
+ y="22.413721" />
+ <rect
+ height="38.044163"
+ id="rect1908"
+ style="fill:url(#radialGradient1315);fill-rule:evenodd;stroke:url(#linearGradient891);stroke-width:1.4649456pt;"
+ transform="matrix(0.716224,0.000000,0.000000,0.716224,-12.57051,-9.652832)"
+ width="58.178177"
+ x="33.386066"
+ y="31.695871" />
+ <path
+ d="M 27.690431,52.841444 L 27.370609,74.749236 C 27.319624,78.241665 29.310209,80.477938 32.807578,80.506029 L 72.625393,80.825852 L 76.463254,71.870840 L 32.008024,71.551020 L 31.688202,52.681533 L 27.690431,52.841444 z "
+ id="path1909"
+ sodipodi:nodetypes="czzccccc"
+ style="fill:url(#linearGradient1146);fill-opacity:1;fill-rule:evenodd;stroke-width:1.0000000pt;"
+ transform="matrix(0.716224,0.000000,0.000000,0.716224,-12.57051,-9.652832)" />
+ <rect
+ height="26.147448"
+ id="rect1913"
+ rx="7.4449978"
+ ry="7.4449978"
+ style="fill:url(#linearGradient901);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient1157);stroke-width:2.3625000;"
+ transform="matrix(0.571582,0.000000,0.000000,0.571582,-77.72566,72.35541)"
+ width="104.09673"
+ x="140.62315"
+ y="-34.316952" />
+ <rect
+ height="15.829688"
+ id="rect1914"
+ rx="3.7576280"
+ ry="3.7576280"
+ style="fill:url(#linearGradient901);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient1157);stroke-width:1.3591428;"
+ transform="matrix(0.571582,0.000000,0.000000,0.571582,-77.72566,72.35541)"
+ width="56.908955"
+ x="184.04552"
+ y="-28.539845" />
+ <rect
+ height="15.829688"
+ id="rect1915"
+ rx="2.9970589"
+ ry="2.9970589"
+ style="fill:url(#linearGradient1141);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient1157);stroke-width:0.96249998;"
+ transform="matrix(0.571582,0.000000,0.000000,0.571582,-77.72566,72.35541)"
+ width="28.796961"
+ x="145.28902"
+ y="-28.227346" />
+ <rect
+ height="3.3627598"
+ id="rect1916"
+ rx="1.6813799"
+ ry="1.6813799"
+ style="fill-opacity:0.13836475;fill-rule:evenodd;stroke-width:0.46326005;"
+ transform="matrix(0.571582,0.000000,0.000000,0.571582,-77.72566,72.35541)"
+ width="49.231453"
+ x="187.88426"
+ y="-21.681381" />
+ </g>
+ <path
+ style="font-size:12px;font-style:normal;font-weight:normal;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1pt;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:helvetica"
+ d="M 7.0612345,-14.660837 L 7.0612345,-23.250681 L 8.2272501,-23.250681 L 12.738969,-16.50654 L 12.738969,-23.250681 L 13.828813,-23.250681 L 13.828813,-14.660837 L 12.662797,-14.660837 L 8.1510782,-21.410837 L 8.1510782,-14.660837 L 7.0612345,-14.660837 z M 19.869828,-16.664743 L 20.959672,-16.529978 C 20.787791,-15.893258 20.469432,-15.399118 20.004594,-15.047556 C 19.539745,-14.695993 18.945996,-14.520212 18.223344,-14.520212 C 17.313185,-14.520212 16.591506,-14.800485 16.058305,-15.361032 C 15.525101,-15.921578 15.2585,-16.70771 15.2585,-17.719431 C 15.2585,-18.766302 15.528031,-19.578801 16.067094,-20.156931 C 16.606155,-20.73505 17.305373,-21.024112 18.16475,-21.024118 C 18.996777,-21.024112 19.676464,-20.740909 20.203813,-20.174509 C 20.73115,-19.608098 20.994822,-18.811224 20.994828,-17.783884 C 20.994822,-17.721381 20.992869,-17.627631 20.988969,-17.502634 L 16.348344,-17.502634 C 16.387405,-16.819038 16.580764,-16.295601 16.928422,-15.932322 C 17.276076,-15.569039 17.709669,-15.387399 18.229203,-15.3874 C 18.615918,-15.387399 18.945996,-15.488961 19.219438,-15.692087 C 19.49287,-15.895211 19.709667,-16.219429 19.869828,-16.664743 L 19.869828,-16.664743 z M 16.406938,-18.369822 L 19.881547,-18.369822 C 19.834667,-18.893255 19.701855,-19.285833 19.483109,-19.547556 C 19.147168,-19.953801 18.711621,-20.156925 18.176469,-20.156931 C 17.692091,-20.156925 17.284865,-19.994816 16.954789,-19.670603 C 16.624709,-19.346379 16.442092,-18.912786 16.406938,-18.369822 L 16.406938,-18.369822 z M 24.592484,-15.604197 L 24.744828,-14.672556 C 24.44795,-14.610056 24.182326,-14.578806 23.947953,-14.578806 C 23.565139,-14.578806 23.268264,-14.639353 23.057328,-14.760447 C 22.846389,-14.88154 22.697952,-15.04072 22.612016,-15.237986 C 22.526077,-15.43525 22.483108,-15.850289 22.483109,-16.483103 L 22.483109,-20.063181 L 21.709672,-20.063181 L 21.709672,-20.883493 L 22.483109,-20.883493 L 22.483109,-22.424509 L 23.531938,-23.057322 L 23.531938,-20.883493 L 24.592484,-20.883493 L 24.592484,-20.063181 L 23.531938,-20.063181 L 23.531938,-16.424509 C 23.531936,-16.123726 23.55049,-15.930367 23.587602,-15.844431 C 23.624709,-15.758492 23.685256,-15.690133 23.769242,-15.639353 C 23.853224,-15.588571 23.973341,-15.56318 24.129594,-15.563181 C 24.246779,-15.56318 24.401075,-15.576852 24.592484,-15.604197 L 24.592484,-15.604197 z M 26.766313,-14.660837 L 24.862016,-20.883493 L 25.951859,-20.883493 L 26.942094,-17.291697 L 27.311234,-15.955759 C 27.326857,-16.022164 27.434279,-16.449898 27.6335,-17.238962 L 28.623734,-20.883493 L 29.707719,-20.883493 L 30.639359,-17.274118 L 30.949906,-16.084665 L 31.307328,-17.285837 L 32.373734,-20.883493 L 33.399125,-20.883493 L 31.453813,-14.660837 L 30.358109,-14.660837 L 29.367875,-18.3874 L 29.127641,-19.447947 L 27.867875,-14.660837 L 26.766313,-14.660837 z M 33.897172,-17.772165 C 33.897172,-18.924505 34.217484,-19.77802 34.858109,-20.332712 C 35.393264,-20.793644 36.045607,-21.024112 36.815141,-21.024118 C 37.670605,-21.024112 38.369823,-20.743839 38.912797,-20.183298 C 39.45576,-19.622746 39.727244,-18.848333 39.72725,-17.860056 C 39.727244,-17.059272 39.607127,-16.42939 39.366899,-15.970407 C 39.126659,-15.511422 38.77705,-15.154977 38.31807,-14.901072 C 37.859082,-14.647165 37.358106,-14.520212 36.815141,-14.520212 C 35.944045,-14.520212 35.239944,-14.799509 34.702836,-15.358103 C 34.165726,-15.916695 33.897172,-16.721382 33.897172,-17.772165 L 33.897172,-17.772165 z M 34.981156,-17.772165 C 34.981155,-16.975288 35.154983,-16.378609 35.502641,-15.982126 C 35.850295,-15.585641 36.287794,-15.387399 36.815141,-15.3874 C 37.338574,-15.387399 37.774121,-15.586617 38.121781,-15.985056 C 38.469433,-16.383492 38.643261,-16.990913 38.643266,-17.807322 C 38.643261,-18.576849 38.468456,-19.159856 38.118852,-19.556345 C 37.769238,-19.952824 37.334668,-20.151066 36.815141,-20.151072 C 36.287794,-20.151066 35.850295,-19.953801 35.502641,-19.559275 C 35.154983,-19.164739 34.981155,-18.569036 34.981156,-17.772165 L 34.981156,-17.772165 z M 40.957719,-14.660837 L 40.957719,-20.883493 L 41.906938,-20.883493 L 41.906938,-19.940134 C 42.149123,-20.381535 42.372756,-20.67255 42.577836,-20.813181 C 42.782912,-20.9538 43.008497,-21.024112 43.254594,-21.024118 C 43.610059,-21.024112 43.971387,-20.910831 44.338578,-20.684275 L 43.975297,-19.705759 C 43.717481,-19.858098 43.459669,-19.934269 43.201859,-19.934275 C 42.971388,-19.934269 42.764357,-19.864934 42.580766,-19.726267 C 42.39717,-19.58759 42.266311,-19.395207 42.188188,-19.149118 C 42.070998,-18.774114 42.012405,-18.363958 42.012406,-17.91865 L 42.012406,-14.660837 L 40.957719,-14.660837 z M 44.983109,-14.660837 L 44.983109,-23.250681 L 46.037797,-23.250681 L 46.037797,-18.352243 L 48.533891,-20.883493 L 49.899125,-20.883493 L 47.520219,-18.5749 L 50.139359,-14.660837 L 48.838578,-14.660837 L 46.781938,-17.842478 L 46.037797,-17.127634 L 46.037797,-14.660837 L 44.983109,-14.660837 z"
+ id="text1232" />
+ <path
+ transform="scale(0.246729,0.246729)"
+ style="font-size:12px;font-style:normal;font-weight:normal;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1pt;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;font-family:helvetica"
+ d="M 91.619637,-37.962852 L 92.756355,-37.675743 C 92.518066,-36.742148 92.089356,-36.030234 91.470222,-35.540001 C 90.851076,-35.049766 90.09424,-34.804649 89.199715,-34.804649 C 88.27393,-34.804649 87.521001,-34.993126 86.940926,-35.370079 C 86.360846,-35.747031 85.91944,-36.292929 85.616707,-37.007774 C 85.313972,-37.722615 85.162605,-38.490193 85.162605,-39.310509 C 85.162605,-40.205035 85.333503,-40.985307 85.675301,-41.651329 C 86.017096,-42.317337 86.503424,-42.823196 87.134285,-43.168907 C 87.765141,-43.514602 88.459476,-43.687453 89.217293,-43.687462 C 90.076662,-43.687453 90.799318,-43.468703 91.385262,-43.031212 C 91.971192,-42.593704 92.379394,-41.97847 92.609871,-41.185509 L 91.49073,-40.921837 C 91.291505,-41.54683 91.002443,-42.001908 90.623543,-42.287071 C 90.244631,-42.57222 89.768069,-42.714798 89.193855,-42.714806 C 88.533695,-42.714798 87.981938,-42.556595 87.538582,-42.240196 C 87.09522,-41.923783 86.783697,-41.498979 86.604012,-40.965782 C 86.424322,-40.432574 86.334479,-39.882769 86.33448,-39.316368 C 86.334479,-38.585896 86.440924,-37.948201 86.653816,-37.403282 C 86.866705,-36.858358 87.197759,-36.451132 87.64698,-36.181602 C 88.096196,-35.91207 88.582523,-35.777305 89.105965,-35.777306 C 89.742678,-35.777305 90.28174,-35.960898 90.723152,-36.328087 C 91.164552,-36.695273 91.46338,-37.240194 91.619637,-37.962852 L 91.619637,-37.962852 z M 94.016121,-34.951134 L 94.016121,-41.17379 L 94.96534,-41.17379 L 94.96534,-40.230431 C 95.207525,-40.671831 95.431158,-40.962846 95.636238,-41.103477 C 95.841314,-41.244096 96.066899,-41.314409 96.312996,-41.314415 C 96.668461,-41.314409 97.029789,-41.201127 97.39698,-40.974571 L 97.033699,-39.996056 C 96.775883,-40.148394 96.518071,-40.224566 96.260262,-40.224571 C 96.02979,-40.224566 95.822759,-40.15523 95.639168,-40.016563 C 95.455572,-39.877887 95.324713,-39.685504 95.24659,-39.439415 C 95.1294,-39.064411 95.070807,-38.654255 95.070808,-38.208946 L 95.070808,-34.951134 L 94.016121,-34.951134 z M 102.29542,-36.95504 L 103.38526,-36.820274 C 103.21338,-36.183554 102.89502,-35.689414 102.43018,-35.337852 C 101.96533,-34.98629 101.37159,-34.810509 100.64893,-34.810509 C 99.738775,-34.810509 99.017096,-35.090782 98.483894,-35.651329 C 97.950691,-36.211875 97.684089,-36.998007 97.68409,-38.009727 C 97.684089,-39.056598 97.95362,-39.869098 98.492683,-40.447227 C 99.031744,-41.025346 99.730962,-41.314409 100.59034,-41.314415 C 101.42237,-41.314409 102.10205,-41.031206 102.6294,-40.464806 C 103.15674,-39.898394 103.42041,-39.10152 103.42042,-38.074181 C 103.42041,-38.011678 103.41846,-37.917928 103.41456,-37.792931 L 98.773933,-37.792931 C 98.812994,-37.109335 99.006354,-36.585898 99.354012,-36.222618 C 99.701665,-35.859336 100.13526,-35.677696 100.65479,-35.677696 C 101.04151,-35.677696 101.37159,-35.779258 101.64503,-35.982384 C 101.91846,-36.185507 102.13526,-36.509726 102.29542,-36.95504 L 102.29542,-36.95504 z M 98.832527,-38.660118 L 102.30714,-38.660118 C 102.26026,-39.183551 102.12744,-39.576129 101.9087,-39.837852 C 101.57276,-40.244097 101.13721,-40.447222 100.60206,-40.447227 C 100.11768,-40.447222 99.710454,-40.285113 99.380379,-39.960899 C 99.050299,-39.636676 98.867682,-39.203083 98.832527,-38.660118 L 98.832527,-38.660118 z M 108.77589,-35.718712 C 108.38526,-35.38668 108.00928,-35.152305 107.64796,-35.015587 C 107.28663,-34.878868 106.89893,-34.810509 106.48487,-34.810509 C 105.80128,-34.810509 105.27589,-34.977501 104.9087,-35.311485 C 104.54151,-35.645469 104.35792,-36.072226 104.35792,-36.591759 C 104.35792,-36.896444 104.42725,-37.174764 104.56593,-37.42672 C 104.7046,-37.67867 104.88624,-37.880818 105.11085,-38.033165 C 105.33546,-38.185505 105.58838,-38.30074 105.86964,-38.378868 C 106.07667,-38.433552 106.38917,-38.486286 106.80714,-38.537071 C 107.6587,-38.63863 108.28565,-38.759724 108.688,-38.900352 C 108.6919,-39.04488 108.69385,-39.136676 108.69386,-39.175743 C 108.69385,-39.605426 108.59424,-39.90816 108.39503,-40.083946 C 108.12549,-40.322222 107.7251,-40.441363 107.19386,-40.441368 C 106.69776,-40.441363 106.33155,-40.354449 106.09522,-40.180626 C 105.85889,-40.006793 105.68409,-39.699176 105.57081,-39.257774 L 104.53956,-39.398399 C 104.63331,-39.839801 104.7876,-40.196246 105.00245,-40.467735 C 105.21729,-40.739214 105.52784,-40.948198 105.93409,-41.094688 C 106.34034,-41.241167 106.81104,-41.314409 107.3462,-41.314415 C 107.87745,-41.314409 108.30909,-41.251909 108.64112,-41.126915 C 108.97315,-41.001909 109.21729,-40.844683 109.37354,-40.655235 C 109.52979,-40.465777 109.63916,-40.226519 109.70167,-39.937462 C 109.73682,-39.75777 109.7544,-39.433551 109.7544,-38.964806 L 109.7544,-37.558556 C 109.7544,-36.578085 109.77686,-35.957969 109.82178,-35.698204 C 109.8667,-35.438438 109.95557,-35.189415 110.08839,-34.951134 L 108.98682,-34.951134 C 108.87744,-35.169884 108.80713,-35.425743 108.77589,-35.718712 L 108.77589,-35.718712 z M 108.688,-38.074181 C 108.30518,-37.917928 107.73096,-37.785115 106.96534,-37.675743 C 106.53174,-37.61324 106.2251,-37.542928 106.04542,-37.464806 C 105.86573,-37.386678 105.72706,-37.27242 105.6294,-37.122032 C 105.53174,-36.97164 105.48292,-36.804647 105.48292,-36.621056 C 105.48292,-36.339804 105.58936,-36.105429 105.80225,-35.917931 C 106.01514,-35.73043 106.32667,-35.63668 106.73682,-35.636681 C 107.14307,-35.63668 107.5044,-35.725547 107.82081,-35.903282 C 108.13721,-36.081015 108.36963,-36.324179 108.51807,-36.632774 C 108.63135,-36.871054 108.68799,-37.222616 108.688,-37.687462 L 108.688,-38.074181 z M 113.69776,-35.894493 L 113.85011,-34.962852 C 113.55323,-34.900353 113.2876,-34.869103 113.05323,-34.869102 C 112.67042,-34.869103 112.37354,-34.929649 112.16261,-35.050743 C 111.95167,-35.171837 111.80323,-35.331016 111.71729,-35.528282 C 111.63135,-35.725547 111.58839,-36.140586 111.58839,-36.773399 L 111.58839,-40.353477 L 110.81495,-40.353477 L 110.81495,-41.17379 L 111.58839,-41.17379 L 111.58839,-42.714806 L 112.63721,-43.347618 L 112.63721,-41.17379 L 113.69776,-41.17379 L 113.69776,-40.353477 L 112.63721,-40.353477 L 112.63721,-36.714806 C 112.63721,-36.414023 112.65577,-36.220664 112.69288,-36.134727 C 112.72999,-36.048789 112.79053,-35.98043 112.87452,-35.929649 C 112.9585,-35.878867 113.07862,-35.853477 113.23487,-35.853477 C 113.35206,-35.853477 113.50635,-35.867148 113.69776,-35.894493 L 113.69776,-35.894493 z M 118.98292,-36.95504 L 120.07276,-36.820274 C 119.90088,-36.183554 119.58252,-35.689414 119.11768,-35.337852 C 118.65283,-34.98629 118.05909,-34.810509 117.33643,-34.810509 C 116.42627,-34.810509 115.7046,-35.090782 115.17139,-35.651329 C 114.63819,-36.211875 114.37159,-36.998007 114.37159,-38.009727 C 114.37159,-39.056598 114.64112,-39.869098 115.18018,-40.447227 C 115.71924,-41.025346 116.41846,-41.314409 117.27784,-41.314415 C 118.10987,-41.314409 118.78955,-41.031206 119.3169,-40.464806 C 119.84424,-39.898394 120.10791,-39.10152 120.10792,-38.074181 C 120.10791,-38.011678 120.10596,-37.917928 120.10206,-37.792931 L 115.46143,-37.792931 C 115.50049,-37.109335 115.69385,-36.585898 116.04151,-36.222618 C 116.38917,-35.859336 116.82276,-35.677696 117.34229,-35.677696 C 117.72901,-35.677696 118.05909,-35.779258 118.33253,-35.982384 C 118.60596,-36.185507 118.82276,-36.509726 118.98292,-36.95504 L 118.98292,-36.95504 z M 115.52003,-38.660118 L 118.99464,-38.660118 C 118.94776,-39.183551 118.81494,-39.576129 118.5962,-39.837852 C 118.26026,-40.244097 117.82471,-40.447222 117.28956,-40.447227 C 116.80518,-40.447222 116.39795,-40.285113 116.06788,-39.960899 C 115.7378,-39.636676 115.55518,-39.203083 115.52003,-38.660118 L 115.52003,-38.660118 z M 125.43995,-34.951134 L 125.43995,-35.73629 C 125.04541,-35.119102 124.46534,-34.810509 123.69971,-34.810509 C 123.20362,-34.810509 122.74756,-34.947227 122.33155,-35.220665 C 121.91553,-35.494102 121.59327,-35.875937 121.36475,-36.366173 C 121.13624,-36.856405 121.02198,-37.419881 121.02198,-38.056602 C 121.02198,-38.677693 121.1255,-39.241169 121.33253,-39.747032 C 121.53956,-40.252886 121.8501,-40.640581 122.26417,-40.910118 C 122.67823,-41.179643 123.14112,-41.314409 123.65284,-41.314415 C 124.02784,-41.314409 124.36182,-41.235307 124.65479,-41.07711 C 124.94776,-40.918901 125.18604,-40.712847 125.36964,-40.458946 L 125.36964,-43.540977 L 126.41846,-43.540977 L 126.41846,-34.951134 L 125.43995,-34.951134 z M 122.10596,-38.056602 C 122.10596,-37.259725 122.27393,-36.664023 122.60987,-36.269493 C 122.94581,-35.874961 123.34229,-35.677696 123.79932,-35.677696 C 124.26026,-35.677696 124.65186,-35.866172 124.97413,-36.243126 C 125.29639,-36.620077 125.45752,-37.195272 125.45753,-37.968712 C 125.45752,-38.82027 125.29346,-39.44527 124.96534,-39.843712 C 124.63721,-40.242144 124.23291,-40.441363 123.75245,-40.441368 C 123.2837,-40.441363 122.8921,-40.249957 122.57764,-39.867149 C 122.26319,-39.484332 122.10596,-38.880817 122.10596,-38.056602 L 122.10596,-38.056602 z M 132.38331,-34.951134 L 131.40479,-34.951134 L 131.40479,-43.540977 L 132.45948,-43.540977 L 132.45948,-40.476524 C 132.90479,-41.035112 133.47315,-41.314409 134.16456,-41.314415 C 134.54737,-41.314409 134.90967,-41.23726 135.25147,-41.08297 C 135.59326,-40.928667 135.87451,-40.71187 136.09522,-40.432579 C 136.31592,-40.153277 136.48877,-39.816363 136.61378,-39.421837 C 136.73877,-39.027302 136.80127,-38.605427 136.80128,-38.156212 C 136.80127,-37.089803 136.5376,-36.265586 136.01026,-35.683556 C 135.48291,-35.101524 134.8501,-34.810509 134.11182,-34.810509 C 133.37745,-34.810509 132.80127,-35.117149 132.38331,-35.730431 L 132.38331,-34.951134 z M 132.37159,-38.109337 C 132.37159,-37.363241 132.47315,-36.824179 132.67628,-36.492149 C 133.00831,-35.94918 133.45752,-35.677696 134.02393,-35.677696 C 134.48487,-35.677696 134.8833,-35.877891 135.21925,-36.278282 C 135.55518,-36.678671 135.72315,-37.27535 135.72315,-38.068321 C 135.72315,-38.880817 135.56201,-39.480426 135.23975,-39.867149 C 134.91748,-40.253863 134.52784,-40.447222 134.07081,-40.447227 C 133.60987,-40.447222 133.21143,-40.247027 132.8755,-39.846642 C 132.53956,-39.446246 132.37159,-38.867145 132.37159,-38.109337 L 132.37159,-38.109337 z M 138.04346,-32.554649 L 137.92628,-33.544884 C 138.15675,-33.482385 138.35792,-33.451135 138.52979,-33.451134 C 138.76417,-33.451135 138.95167,-33.490198 139.09229,-33.568321 C 139.23292,-33.646448 139.34815,-33.755822 139.438,-33.896446 C 139.5044,-34.001916 139.61182,-34.263634 139.76026,-34.681602 C 139.77979,-34.740196 139.81104,-34.826134 139.85401,-34.939415 L 137.49268,-41.17379 L 138.6294,-41.17379 L 139.92432,-37.570274 C 140.09229,-37.113241 140.24268,-36.632773 140.3755,-36.128868 C 140.49659,-36.613241 140.64112,-37.085897 140.80909,-37.546837 L 142.13917,-41.17379 L 143.19386,-41.17379 L 140.82667,-34.845665 C 140.57276,-34.162072 140.37549,-33.691369 140.23487,-33.433556 C 140.04737,-33.085901 139.83252,-32.831019 139.59034,-32.668907 C 139.34815,-32.5068 139.05909,-32.425746 138.72315,-32.425743 C 138.52003,-32.425746 138.29346,-32.468714 138.04346,-32.554649 L 138.04346,-32.554649 z M 146.60987,-34.951134 L 149.9087,-43.540977 L 151.13331,-43.540977 L 154.64893,-34.951134 L 153.35401,-34.951134 L 152.35206,-37.552696 L 148.76026,-37.552696 L 147.8169,-34.951134 L 146.60987,-34.951134 z M 149.08839,-38.478477 L 152.0005,-38.478477 L 151.10401,-40.857384 C 150.83057,-41.580033 150.62745,-42.173783 150.49464,-42.638634 C 150.38526,-42.087845 150.23096,-41.540971 150.03175,-40.998009 L 149.08839,-38.478477 z M 155.43409,-34.951134 L 155.43409,-41.17379 L 156.38331,-41.17379 L 156.38331,-40.289024 C 156.84034,-40.972612 157.50049,-41.314409 158.36378,-41.314415 C 158.73877,-41.314409 159.0835,-41.247026 159.39796,-41.112267 C 159.7124,-40.977495 159.94776,-40.800737 160.10401,-40.581993 C 160.26026,-40.363238 160.36963,-40.103472 160.43214,-39.802696 C 160.47119,-39.607379 160.49072,-39.265583 160.49073,-38.777306 L 160.49073,-34.951134 L 159.43604,-34.951134 L 159.43604,-38.73629 C 159.43604,-39.165973 159.39502,-39.487262 159.313,-39.700157 C 159.23096,-39.913043 159.08545,-40.082965 158.87647,-40.209923 C 158.66748,-40.336871 158.42237,-40.400347 158.14112,-40.400352 C 157.6919,-40.400347 157.3042,-40.257769 156.97803,-39.972618 C 156.65186,-39.687457 156.48878,-39.146442 156.48878,-38.349571 L 156.48878,-34.951134 L 155.43409,-34.951134 z M 166.15089,-34.951134 L 166.15089,-35.73629 C 165.75635,-35.119102 165.17627,-34.810509 164.41065,-34.810509 C 163.91456,-34.810509 163.4585,-34.947227 163.04249,-35.220665 C 162.62647,-35.494102 162.30421,-35.875937 162.07569,-36.366173 C 161.84718,-36.856405 161.73292,-37.419881 161.73292,-38.056602 C 161.73292,-38.677693 161.83643,-39.241169 162.04346,-39.747032 C 162.25049,-40.252886 162.56104,-40.640581 162.97511,-40.910118 C 163.38917,-41.179643 163.85206,-41.314409 164.36378,-41.314415 C 164.73877,-41.314409 165.07276,-41.235307 165.36573,-41.07711 C 165.65869,-40.918901 165.89698,-40.712847 166.08057,-40.458946 L 166.08057,-43.540977 L 167.1294,-43.540977 L 167.1294,-34.951134 L 166.15089,-34.951134 z M 162.8169,-38.056602 C 162.8169,-37.259725 162.98487,-36.664023 163.32081,-36.269493 C 163.65674,-35.874961 164.05323,-35.677696 164.51026,-35.677696 C 164.9712,-35.677696 165.3628,-35.866172 165.68507,-36.243126 C 166.00733,-36.620077 166.16846,-37.195272 166.16846,-37.968712 C 166.16846,-38.82027 166.0044,-39.44527 165.67628,-39.843712 C 165.34815,-40.242144 164.94385,-40.441363 164.46339,-40.441368 C 163.99463,-40.441363 163.60303,-40.249957 163.28858,-39.867149 C 162.97413,-39.484332 162.8169,-38.880817 162.8169,-38.056602 L 162.8169,-38.056602 z M 168.78175,-34.951134 L 168.78175,-41.17379 L 169.73096,-41.17379 L 169.73096,-40.230431 C 169.97315,-40.671831 170.19678,-40.962846 170.40186,-41.103477 C 170.60694,-41.244096 170.83252,-41.314409 171.07862,-41.314415 C 171.43409,-41.314409 171.79541,-41.201127 172.16261,-40.974571 L 171.79932,-39.996056 C 171.54151,-40.148394 171.2837,-40.224566 171.02589,-40.224571 C 170.79541,-40.224566 170.58838,-40.15523 170.40479,-40.016563 C 170.2212,-39.877887 170.09034,-39.685504 170.01221,-39.439415 C 169.89503,-39.064411 169.83643,-38.654255 169.83643,-38.208946 L 169.83643,-34.951134 L 168.78175,-34.951134 z M 177.06104,-36.95504 L 178.15089,-36.820274 C 177.97901,-36.183554 177.66065,-35.689414 177.19581,-35.337852 C 176.73096,-34.98629 176.13721,-34.810509 175.41456,-34.810509 C 174.5044,-34.810509 173.78272,-35.090782 173.24952,-35.651329 C 172.71632,-36.211875 172.44971,-36.998007 172.44971,-38.009727 C 172.44971,-39.056598 172.71925,-39.869098 173.25831,-40.447227 C 173.79737,-41.025346 174.49659,-41.314409 175.35596,-41.314415 C 176.18799,-41.314409 176.86768,-41.031206 177.39503,-40.464806 C 177.92236,-39.898394 178.18604,-39.10152 178.18604,-38.074181 C 178.18604,-38.011678 178.18408,-37.917928 178.18018,-37.792931 L 173.53956,-37.792931 C 173.57862,-37.109335 173.77198,-36.585898 174.11964,-36.222618 C 174.46729,-35.859336 174.90088,-35.677696 175.42042,-35.677696 C 175.80713,-35.677696 176.13721,-35.779258 176.41065,-35.982384 C 176.68408,-36.185507 176.90088,-36.509726 177.06104,-36.95504 L 177.06104,-36.95504 z M 173.59815,-38.660118 L 177.07276,-38.660118 C 177.02588,-39.183551 176.89307,-39.576129 176.67432,-39.837852 C 176.33838,-40.244097 175.90284,-40.447222 175.36768,-40.447227 C 174.88331,-40.447222 174.47608,-40.285113 174.146,-39.960899 C 173.81592,-39.636676 173.63331,-39.203083 173.59815,-38.660118 L 173.59815,-38.660118 z M 180.6294,-34.951134 L 178.72511,-41.17379 L 179.81495,-41.17379 L 180.80518,-37.581993 L 181.17432,-36.246056 C 181.18995,-36.31246 181.29737,-36.740194 181.49659,-37.529259 L 182.48682,-41.17379 L 183.57081,-41.17379 L 184.50245,-37.564415 L 184.813,-36.374962 L 185.17042,-37.576134 L 186.23682,-41.17379 L 187.26221,-41.17379 L 185.3169,-34.951134 L 184.2212,-34.951134 L 183.23096,-38.677696 L 182.99073,-39.738243 L 181.73096,-34.951134 L 180.6294,-34.951134 z M 191.67432,-34.951134 L 191.67432,-43.540977 L 197.46925,-43.540977 L 197.46925,-42.527306 L 192.81104,-42.527306 L 192.81104,-39.867149 L 196.84229,-39.867149 L 196.84229,-38.853477 L 192.81104,-38.853477 L 192.81104,-34.951134 L 191.67432,-34.951134 z M 198.82276,-42.328087 L 198.82276,-43.540977 L 199.87745,-43.540977 L 199.87745,-42.328087 L 198.82276,-42.328087 z M 198.82276,-34.951134 L 198.82276,-41.17379 L 199.87745,-41.17379 L 199.87745,-34.951134 L 198.82276,-34.951134 z M 203.79151,-35.894493 L 203.94386,-34.962852 C 203.64698,-34.900353 203.38135,-34.869103 203.14698,-34.869102 C 202.76417,-34.869103 202.46729,-34.929649 202.25636,-35.050743 C 202.04542,-35.171837 201.89698,-35.331016 201.81104,-35.528282 C 201.7251,-35.725547 201.68214,-36.140586 201.68214,-36.773399 L 201.68214,-40.353477 L 200.9087,-40.353477 L 200.9087,-41.17379 L 201.68214,-41.17379 L 201.68214,-42.714806 L 202.73096,-43.347618 L 202.73096,-41.17379 L 203.79151,-41.17379 L 203.79151,-40.353477 L 202.73096,-40.353477 L 202.73096,-36.714806 C 202.73096,-36.414023 202.74952,-36.220664 202.78663,-36.134727 C 202.82374,-36.048789 202.88428,-35.98043 202.96827,-35.929649 C 203.05225,-35.878867 203.17237,-35.853477 203.32862,-35.853477 C 203.44581,-35.853477 203.6001,-35.867148 203.79151,-35.894493 L 203.79151,-35.894493 z M 204.26026,-34.951134 L 204.26026,-35.806602 L 208.2212,-40.353477 C 207.77198,-40.330035 207.37549,-40.318316 207.03175,-40.318321 L 204.49464,-40.318321 L 204.49464,-41.17379 L 209.58057,-41.17379 L 209.58057,-40.476524 L 206.21143,-36.527306 L 205.56104,-35.806602 C 206.0337,-35.841758 206.47706,-35.859336 206.89112,-35.859337 L 209.76807,-35.859337 L 209.76807,-34.951134 L 204.26026,-34.951134 z M 210.39503,-36.808556 L 211.438,-36.972618 C 211.49659,-36.554648 211.65967,-36.234336 211.92725,-36.011681 C 212.19483,-35.789024 212.56885,-35.677696 213.04932,-35.677696 C 213.5337,-35.677696 213.89307,-35.776328 214.12745,-35.973595 C 214.36182,-36.170859 214.47901,-36.402304 214.47901,-36.667931 C 214.47901,-36.90621 214.37549,-37.09371 214.16846,-37.230431 C 214.02393,-37.324178 213.66455,-37.443319 213.09034,-37.587852 C 212.3169,-37.783162 211.78077,-37.952107 211.48194,-38.094688 C 211.18311,-38.237263 210.95655,-38.434529 210.80225,-38.686485 C 210.64796,-38.938434 210.57081,-39.216754 210.57081,-39.521446 C 210.57081,-39.798785 210.63428,-40.055621 210.76124,-40.291954 C 210.88819,-40.528277 211.06104,-40.724565 211.27979,-40.880821 C 211.44385,-41.001909 211.66749,-41.104448 211.95069,-41.188438 C 212.23389,-41.272416 212.5376,-41.314409 212.86182,-41.314415 C 213.3501,-41.314409 213.77881,-41.244096 214.14796,-41.103477 C 214.51709,-40.962846 214.78955,-40.772417 214.96534,-40.532188 C 215.14112,-40.291949 215.26221,-39.97066 215.32862,-39.568321 L 214.29737,-39.427696 C 214.25049,-39.748004 214.11475,-39.998004 213.89014,-40.177696 C 213.66553,-40.357378 213.34815,-40.447222 212.938,-40.447227 C 212.45362,-40.447222 212.10792,-40.367144 211.90089,-40.206993 C 211.69385,-40.046832 211.59034,-39.859332 211.59034,-39.644493 C 211.59034,-39.50777 211.63331,-39.384723 211.71925,-39.275352 C 211.80518,-39.162067 211.93995,-39.068317 212.12354,-38.994102 C 212.22901,-38.955036 212.53956,-38.865192 213.05518,-38.724571 C 213.80127,-38.525349 214.32178,-38.362263 214.61671,-38.235313 C 214.91162,-38.108357 215.14307,-37.923787 215.31104,-37.681602 C 215.47901,-37.439412 215.56299,-37.138632 215.563,-36.779259 C 215.56299,-36.427695 215.46045,-36.09664 215.25538,-35.786095 C 215.0503,-35.475547 214.7544,-35.235313 214.36768,-35.065392 C 213.98096,-34.89547 213.54346,-34.810509 213.05518,-34.810509 C 212.24659,-34.810509 211.63038,-34.978477 211.20655,-35.314415 C 210.78272,-35.650352 210.51221,-36.148398 210.39503,-36.808556 L 210.39503,-36.808556 z M 216.82276,-42.328087 L 216.82276,-43.540977 L 217.87745,-43.540977 L 217.87745,-42.328087 L 216.82276,-42.328087 z M 216.82276,-34.951134 L 216.82276,-41.17379 L 217.87745,-41.17379 L 217.87745,-34.951134 L 216.82276,-34.951134 z M 219.48878,-34.951134 L 219.48878,-41.17379 L 220.43214,-41.17379 L 220.43214,-40.300743 C 220.62745,-40.605425 220.88721,-40.850542 221.21143,-41.036095 C 221.53565,-41.221635 221.90479,-41.314409 222.31886,-41.314415 C 222.77979,-41.314409 223.15772,-41.218706 223.45264,-41.027306 C 223.74756,-40.835893 223.95557,-40.568316 224.07667,-40.224571 C 224.56885,-40.951128 225.20947,-41.314409 225.99854,-41.314415 C 226.61572,-41.314409 227.09033,-41.14351 227.42237,-40.80172 C 227.75439,-40.459917 227.92041,-39.933551 227.92042,-39.222618 L 227.92042,-34.951134 L 226.87159,-34.951134 L 226.87159,-38.871056 C 226.87158,-39.292926 226.8374,-39.596637 226.76905,-39.782188 C 226.70068,-39.96773 226.57666,-40.117144 226.39698,-40.230431 C 226.21729,-40.343706 226.00635,-40.400347 225.76417,-40.400352 C 225.32666,-40.400347 224.96338,-40.254839 224.67432,-39.963829 C 224.38526,-39.672809 224.24072,-39.206989 224.24073,-38.566368 L 224.24073,-34.951134 L 223.18604,-34.951134 L 223.18604,-38.994102 C 223.18604,-39.462848 223.1001,-39.81441 222.92823,-40.04879 C 222.75635,-40.28316 222.4751,-40.400347 222.08448,-40.400352 C 221.7876,-40.400347 221.51319,-40.322222 221.26124,-40.165977 C 221.00928,-40.009722 220.82667,-39.781207 220.71339,-39.480431 C 220.6001,-39.179645 220.54346,-38.746052 220.54346,-38.179649 L 220.54346,-34.951134 L 219.48878,-34.951134 z M 229.10401,-38.062462 C 229.10401,-39.214801 229.42432,-40.068316 230.06495,-40.623009 C 230.6001,-41.08394 231.25245,-41.314409 232.02198,-41.314415 C 232.87744,-41.314409 233.57666,-41.034135 234.11964,-40.473595 C 234.6626,-39.913043 234.93408,-39.13863 234.93409,-38.150352 C 234.93408,-37.349569 234.81397,-36.719687 234.57374,-36.260704 C 234.3335,-35.801719 233.98389,-35.445274 233.52491,-35.191368 C 233.06592,-34.937462 232.56495,-34.810509 232.02198,-34.810509 C 231.15088,-34.810509 230.44678,-35.089805 229.90968,-35.648399 C 229.37257,-36.206992 229.10401,-37.011679 229.10401,-38.062462 L 229.10401,-38.062462 z M 230.188,-38.062462 C 230.18799,-37.265585 230.36182,-36.668905 230.70948,-36.272423 C 231.05713,-35.875937 231.49463,-35.677696 232.02198,-35.677696 C 232.54541,-35.677696 232.98096,-35.876914 233.32862,-36.275352 C 233.67627,-36.673788 233.8501,-37.28121 233.85011,-38.097618 C 233.8501,-38.867145 233.6753,-39.450153 233.32569,-39.846642 C 232.97608,-40.243121 232.54151,-40.441363 232.02198,-40.441368 C 231.49463,-40.441363 231.05713,-40.244097 230.70948,-39.849571 C 230.36182,-39.455035 230.18799,-38.859333 230.188,-38.062462 L 230.188,-38.062462 z M 236.17628,-34.951134 L 236.17628,-41.17379 L 237.1255,-41.17379 L 237.1255,-40.289024 C 237.58252,-40.972612 238.24268,-41.314409 239.10596,-41.314415 C 239.48096,-41.314409 239.82569,-41.247026 240.14014,-41.112267 C 240.45459,-40.977495 240.68994,-40.800737 240.8462,-40.581993 C 241.00244,-40.363238 241.11182,-40.103472 241.17432,-39.802696 C 241.21338,-39.607379 241.23291,-39.265583 241.23292,-38.777306 L 241.23292,-34.951134 L 240.17823,-34.951134 L 240.17823,-38.73629 C 240.17823,-39.165973 240.13721,-39.487262 240.05518,-39.700157 C 239.97315,-39.913043 239.82764,-40.082965 239.61866,-40.209923 C 239.40967,-40.336871 239.16455,-40.400347 238.88331,-40.400352 C 238.43409,-40.400347 238.04639,-40.257769 237.72022,-39.972618 C 237.39405,-39.687457 237.23096,-39.146442 237.23096,-38.349571 L 237.23096,-34.951134 L 236.17628,-34.951134 z"
+ id="text1235" />
+ <g
+ id="g2852"
+ transform="matrix(1.018857,0.000000,0.000000,1.018857,-4.481650,2.131177)">
+ <rect
+ height="8.3153667"
+ id="rect1866"
+ style="fill:url(#linearGradient1156);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient1157);stroke-width:1.4473482pt;"
+ transform="matrix(1.150066,0.000000,0.000000,1.150066,38.98882,26.86863)"
+ width="57.567924"
+ x="33.326111"
+ y="78.658051" />
+ <rect
+ height="60.126495"
+ id="rect1867"
+ rx="5.4369707"
+ ry="5.4369707"
+ style="fill:url(#linearGradient905);fill-opacity:1;fill-rule:evenodd;stroke-width:1.6282668;"
+ transform="matrix(1.150066,0.000000,0.000000,1.150066,38.98882,26.86863)"
+ width="72.279724"
+ x="26.015469"
+ y="22.413721" />
+ <rect
+ height="38.044163"
+ id="rect1868"
+ style="fill:url(#radialGradient1132);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient891);stroke-width:1.4649456pt;"
+ transform="matrix(1.150066,0.000000,0.000000,1.150066,38.98882,26.86863)"
+ width="58.178177"
+ x="33.386066"
+ y="31.695871" />
+ <path
+ d="M 27.690431,52.841444 L 27.370609,74.749236 C 27.319624,78.241665 29.310209,80.477938 32.807578,80.506029 L 72.625393,80.825852 L 76.463254,71.870840 L 32.008024,71.551020 L 31.688202,52.681533 L 27.690431,52.841444 z "
+ id="path1869"
+ sodipodi:nodetypes="czzccccc"
+ style="fill:url(#linearGradient1146);fill-opacity:1;fill-rule:evenodd;stroke-width:1.0000000pt;"
+ transform="matrix(1.150066,0.000000,0.000000,1.150066,38.98882,26.86863)" />
+ <g
+ id="g1870"
+ transform="matrix(1.150066,0.000000,0.000000,1.150066,38.98882,26.86863)">
+ <path
+ d="M 42.062098,33.460351 L 77.341205,33.008055 C 82.787126,32.938235 89.553204,38.416797 89.553204,43.863165 L 89.553204,60.145830 L 41.609801,59.693534 L 42.062098,33.460351 z "
+ id="path1871"
+ sodipodi:nodetypes="czzccc"
+ style="fill:url(#linearGradient1148);fill-opacity:1;fill-rule:evenodd;stroke-width:1.0000000pt;" />
+ <path
+ d="M 78.337784,67.629235 L 46.723745,67.724544 C 41.843589,67.739257 35.829319,62.771024 35.877168,57.891081 L 36.020221,43.301821 L 78.973514,44.128288 L 78.337784,67.629235 z "
+ id="path1872"
+ sodipodi:nodetypes="czzccc"
+ style="fill:url(#linearGradient1150);fill-opacity:1;fill-rule:evenodd;stroke-width:1.0000000pt;" />
+ </g>
+ <rect
+ height="26.147448"
+ id="rect1888"
+ rx="7.4449978"
+ ry="7.4449978"
+ style="fill:url(#linearGradient901);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient1157);stroke-width:2.3625000;"
+ transform="matrix(0.917809,0.000000,0.000000,0.917809,-65.63305,158.5521)"
+ width="104.09673"
+ x="140.62315"
+ y="-34.316952" />
+ <rect
+ height="15.829688"
+ id="rect1889"
+ rx="3.7576280"
+ ry="3.7576280"
+ style="fill:url(#linearGradient901);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient1157);stroke-width:1.3591428;"
+ transform="matrix(0.917809,0.000000,0.000000,0.917809,-65.63305,158.5521)"
+ width="56.908955"
+ x="184.04552"
+ y="-28.539845" />
+ <rect
+ height="15.829688"
+ id="rect1890"
+ rx="2.9970589"
+ ry="2.9970589"
+ style="fill:url(#linearGradient1141);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient1157);stroke-width:0.96249998;"
+ transform="matrix(0.917809,0.000000,0.000000,0.917809,-65.63305,158.5521)"
+ width="28.796961"
+ x="145.28902"
+ y="-28.227346" />
+ <rect
+ height="3.3627598"
+ id="rect1891"
+ rx="1.6813799"
+ ry="1.6813799"
+ style="fill-opacity:0.16981132;fill-rule:evenodd;stroke-width:0.46326005;"
+ transform="matrix(0.917809,0.000000,0.000000,0.917809,-65.63305,158.5521)"
+ width="49.231453"
+ x="187.88426"
+ y="-21.681381" />
+ </g>
+</svg>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/invitation.svg b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/invitation.svg
new file mode 100755
index 0000000..1a02d13
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/invitation.svg
@@ -0,0 +1,374 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+<svg
+ xmlns:dc="http://purl.org/dc/elements/1.1/"
+ xmlns:cc="http://web.resource.org/cc/"
+ xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+ xmlns:svg="http://www.w3.org/2000/svg"
+ xmlns="http://www.w3.org/2000/svg"
+ xmlns:xlink="http://www.w3.org/1999/xlink"
+ xmlns:sodipodi="http://inkscape.sourceforge.net/DTD/sodipodi-0.dtd"
+ xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+ width="64.000000px"
+ height="64.000000px"
+ id="svg2"
+ sodipodi:version="0.32"
+ inkscape:version="0.42"
+ sodipodi:docbase="G:\Projs\Cliparts Stocker\released"
+ sodipodi:docname="unknown_green.svg"
+ inkscape:export-filename="/datas/wiki/unknown_green.png"
+ inkscape:export-xdpi="90.000000"
+ inkscape:export-ydpi="90.000000">
+ <defs
+ id="defs4">
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient2842"
+ id="linearGradient1363"
+ x1="25.403513"
+ y1="19.175573"
+ x2="35.541985"
+ y2="49.068703"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="translate(-2.402975,4.759656e-3)" />
+ <linearGradient
+ id="linearGradient2900">
+ <stop
+ id="stop2902"
+ offset="0.0000000"
+ style="stop-color:#ffffff;stop-opacity:1.0000000;" />
+ <stop
+ id="stop2904"
+ offset="1.0000000"
+ style="stop-color:#ffffff;stop-opacity:1.0000000;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient2842">
+ <stop
+ style="stop-color:#ffffff;stop-opacity:1.0000000;"
+ offset="0.0000000"
+ id="stop2844" />
+ <stop
+ style="stop-color:#c8c8c8;stop-opacity:1.0000000;"
+ offset="1.0000000"
+ id="stop2846" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient2814">
+ <stop
+ id="stop2816"
+ offset="0.0000000"
+ style="stop-color:#e6e6e6;stop-opacity:1.0000000;" />
+ <stop
+ id="stop2818"
+ offset="1.0000000"
+ style="stop-color:#11661d;stop-opacity:0.0000000;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient2171">
+ <stop
+ style="stop-color:#ffffff;stop-opacity:1.0000000;"
+ offset="0.0000000"
+ id="stop2173" />
+ <stop
+ style="stop-color:#a3a5ee;stop-opacity:0.0000000;"
+ offset="1.0000000"
+ id="stop2175" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient2160">
+ <stop
+ id="stop2162"
+ offset="0.0000000"
+ style="stop-color:#d3cece;stop-opacity:1.0000000;" />
+ <stop
+ id="stop2164"
+ offset="1.0000000"
+ style="stop-color:#474240;stop-opacity:1.0000000;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient1367">
+ <stop
+ id="stop1369"
+ offset="0.0000000"
+ style="stop-color:#f67e36;stop-opacity:1.0000000;" />
+ <stop
+ id="stop1371"
+ offset="1.0000000"
+ style="stop-color:#602604;stop-opacity:1.0000000;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient1347">
+ <stop
+ style="stop-color:#f0da27;stop-opacity:1.0000000;"
+ offset="0.0000000"
+ id="stop1349" />
+ <stop
+ style="stop-color:#bf4d09;stop-opacity:1.0000000;"
+ offset="1.0000000"
+ id="stop1351" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient1315">
+ <stop
+ style="stop-color:#97ff82;stop-opacity:1.0000000;"
+ offset="0.0000000"
+ id="stop1317" />
+ <stop
+ style="stop-color:#ceff24;stop-opacity:0.0000000;"
+ offset="1.0000000"
+ id="stop1319" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient2122">
+ <stop
+ style="stop-color:#2edc32;stop-opacity:1.0000000;"
+ offset="0.0000000"
+ id="stop2124" />
+ <stop
+ style="stop-color:#11661d;stop-opacity:1.0000000;"
+ offset="1.0000000"
+ id="stop2126" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient1364">
+ <stop
+ style="stop-color:#236b0d;stop-opacity:1.0000000;"
+ offset="0.00000000"
+ id="stop1366" />
+ <stop
+ style="stop-color:#0a2205;stop-opacity:1.0000000;"
+ offset="1.0000000"
+ id="stop1368" />
+ </linearGradient>
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient1367"
+ id="radialGradient1402"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(1.211118e-16,1.330643,-1.347411,2.027373e-5,44.09678,-13.39507)"
+ cx="21.959658"
+ cy="14.921703"
+ fx="21.959658"
+ fy="14.921703"
+ r="27.500000" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient2122"
+ id="radialGradient1404"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(1.211118e-16,1.330643,-1.347411,2.027373e-5,44.09678,-13.39507)"
+ cx="21.959658"
+ cy="14.921703"
+ fx="21.959658"
+ fy="14.921703"
+ r="27.500000" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient1364"
+ id="linearGradient1419"
+ gradientUnits="userSpaceOnUse"
+ x1="74.910713"
+ y1="32.362179"
+ x2="84.910713"
+ y2="47.451466" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient2122"
+ id="linearGradient1421"
+ gradientUnits="userSpaceOnUse"
+ x1="73.839287"
+ y1="34.428566"
+ x2="76.875000"
+ y2="43.714283" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient1315"
+ id="linearGradient1423"
+ gradientUnits="userSpaceOnUse"
+ x1="72.946426"
+ y1="35.589287"
+ x2="85.000000"
+ y2="47.375000" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient2171"
+ id="linearGradient2177"
+ x1="24.916031"
+ y1="28.824427"
+ x2="39.816792"
+ y2="49.099239"
+ gradientUnits="userSpaceOnUse" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient2122"
+ id="radialGradient2184"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(9.909149e-17,1.088708,-1.102427,1.658760e-5,41.48828,-4.732338)"
+ cx="21.959658"
+ cy="14.921703"
+ fx="21.959658"
+ fy="14.921703"
+ r="27.500000" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient1364"
+ id="linearGradient2189"
+ x1="10.018247"
+ y1="8.6306763"
+ x2="63.487556"
+ y2="63.660282"
+ gradientUnits="userSpaceOnUse" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient2171"
+ id="linearGradient1339"
+ gradientUnits="userSpaceOnUse"
+ x1="24.916031"
+ y1="28.824427"
+ x2="39.816792"
+ y2="49.099239" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient2122"
+ id="radialGradient1343"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(2.521415e-2,1.026125,-0.978137,2.404729e-2,38.83024,-3.575704)"
+ cx="24.764277"
+ cy="16.361967"
+ fx="24.764277"
+ fy="16.361967"
+ r="27.500000" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient1364"
+ id="linearGradient1346"
+ gradientUnits="userSpaceOnUse"
+ x1="10.018247"
+ y1="8.6306763"
+ x2="63.487556"
+ y2="63.660282" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient2814"
+ id="radialGradient2812"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(1.142398e-2,1.098850,-1.843995,1.878760e-2,52.15051,-5.667446)"
+ cx="18.387238"
+ cy="14.046815"
+ fx="18.387238"
+ fy="14.046815"
+ r="27.500000" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient1364"
+ id="linearGradient2832"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="translate(-2.841000e-3,-2.841000e-3)"
+ x1="10.018247"
+ y1="8.6306763"
+ x2="63.487556"
+ y2="63.660282" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient2842"
+ id="linearGradient2848"
+ x1="-0.56685609"
+ y1="22.651009"
+ x2="-0.33713850"
+ y2="23.858734"
+ gradientUnits="userSpaceOnUse" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient2842"
+ id="linearGradient2864"
+ gradientUnits="userSpaceOnUse"
+ x1="-0.82287467"
+ y1="22.444542"
+ x2="-0.33713850"
+ y2="23.858734" />
+ </defs>
+ <sodipodi:namedview
+ id="base"
+ pagecolor="#ffffff"
+ bordercolor="#666666"
+ borderopacity="1.0"
+ inkscape:pageopacity="0.0"
+ inkscape:pageshadow="2"
+ inkscape:zoom="8.2031250"
+ inkscape:cx="32.000000"
+ inkscape:cy="32.000000"
+ inkscape:document-units="px"
+ inkscape:current-layer="layer1"
+ showgrid="false"
+ inkscape:grid-bbox="true"
+ inkscape:grid-points="true"
+ inkscape:window-width="1156"
+ inkscape:window-height="693"
+ inkscape:window-x="0"
+ inkscape:window-y="25"
+ showguides="false" />
+ <metadata
+ id="metadata7">
+ <rdf:RDF>
+ <cc:Work
+ rdf:about="">
+ <dc:format>image/svg+xml</dc:format>
+ <dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+ <dc:title>Green Unknown</dc:title>
+ <dc:date>2005-11-01</dc:date>
+ <dc:creator>
+ <cc:Agent>
+ <dc:title>Jean-Victor Balin</dc:title>
+ </cc:Agent>
+ </dc:creator>
+ <dc:description>jean.victor.balin@gmail.com</dc:description>
+ <cc:license
+ rdf:resource="http://web.resource.org/cc/PublicDomain" />
+ <dc:subject>
+ <rdf:Bag>
+ <rdf:li>icon</rdf:li>
+ </rdf:Bag>
+ </dc:subject>
+ </cc:Work>
+ <cc:License
+ rdf:about="http://web.resource.org/cc/PublicDomain">
+ <cc:permits
+ rdf:resource="http://web.resource.org/cc/Reproduction" />
+ <cc:permits
+ rdf:resource="http://web.resource.org/cc/Distribution" />
+ <cc:permits
+ rdf:resource="http://web.resource.org/cc/DerivativeWorks" />
+ </cc:License>
+ </rdf:RDF>
+ </metadata>
+ <g
+ inkscape:label="Calque 1"
+ inkscape:groupmode="layer"
+ id="layer1">
+ <g
+ id="g1354">
+ <path
+ id="path1373"
+ d="M 32.000000,8.6306766 C 19.113097,8.6306766 8.6306766,19.113097 8.6306766,32.000000 C 8.6306766,44.886903 19.113097,55.369323 32.000000,55.369323 C 44.886903,55.369323 55.369323,44.886903 55.369323,32.000000 C 55.369323,19.113097 44.886903,8.6306766 32.000000,8.6306766 z "
+ style="fill:url(#linearGradient1346);fill-opacity:1.0000000;stroke:none;stroke-width:2.0000000;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4.0000000;stroke-opacity:1.0000000" />
+ <path
+ id="path1339"
+ d="M 54.500005,32.000000 C 54.500005,44.420003 44.420003,54.500005 32.000000,54.500005 C 19.579997,54.500005 9.4999950,44.420003 9.4999950,32.000000 C 9.4999950,19.579997 19.579997,9.4999950 32.000000,9.4999950 C 44.420003,9.4999950 54.500005,19.579997 54.500005,32.000000 z "
+ style="fill:url(#radialGradient1343);fill-opacity:1.0000000;stroke:none;stroke-width:2.0000000;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4.0000000;stroke-opacity:1.0000000" />
+ <path
+ id="path1341"
+ d="M 32.016991,9.1562500 C 22.574792,9.1562500 14.505423,14.865048 11.062500,22.968750 C 16.006322,25.801817 21.393258,27.855853 27.181339,27.593750 C 32.755311,27.279922 37.553510,23.530916 43.236968,23.812500 C 47.451058,23.716455 52.244330,25.294372 54.488550,29.000000 C 53.142630,17.846718 43.657640,9.1562500 32.016991,9.1562500 z "
+ style="fill:url(#radialGradient2812);fill-opacity:1.0000000;stroke:none;stroke-width:2.0000000;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4.0000000;stroke-opacity:1.0000000" />
+ <path
+ id="path2827"
+ d="M 32.000000,8.6250000 C 19.113098,8.6250000 8.6250000,19.113097 8.6250000,32.000000 C 8.6250000,44.886904 19.113097,55.375000 32.000000,55.375000 C 44.886904,55.375000 55.375000,44.886903 55.375000,32.000000 C 55.375000,19.113098 44.886903,8.6250000 32.000000,8.6250000 z M 32.000000,9.5000000 C 44.420004,9.4999998 54.500000,19.579997 54.500000,32.000000 C 54.499998,44.420004 44.420003,54.500000 32.000000,54.500000 C 19.579998,54.499998 9.5000000,44.420003 9.5000000,32.000000 C 9.5000000,19.579998 19.579997,9.5000000 32.000000,9.5000000 z "
+ style="fill:url(#linearGradient2832);fill-opacity:1.0000000;stroke:none;stroke-width:2.0000000;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4.0000000;stroke-opacity:1.0000000" />
+ <path
+ id="text1353"
+ d="M 32.556888,39.006317 C 32.692760,35.835967 33.100380,35.066018 35.908404,32.892064 C 39.395790,30.219911 39.803410,29.902873 40.120445,29.631129 C 41.705621,28.272407 42.611437,26.189029 42.611437,24.015074 C 42.611437,19.078386 38.625844,15.953318 32.285143,15.953318 C 26.306768,15.953318 22.094721,18.851931 22.094721,23.018677 C 22.094721,25.464376 23.906354,27.230718 26.397344,27.230718 C 28.707171,27.230718 30.292350,25.736121 30.292350,23.607457 C 30.292350,22.384608 29.794150,21.388209 28.843045,20.663558 C 28.027812,20.029488 27.982521,19.984196 27.982521,19.667161 C 27.982521,19.033091 28.978919,18.534892 30.382931,18.534892 C 33.100374,18.534892 34.640263,20.346525 34.640263,23.516876 C 34.640263,25.373795 33.960900,27.683628 32.828632,29.721710 C 30.337643,34.160201 29.975314,35.066023 29.975314,37.104105 C 29.975314,37.557012 30.020605,38.281665 30.111187,39.006317 L 32.556888,39.006317 M 31.424619,41.497309 C 29.069501,41.497309 27.167287,43.399523 27.167287,45.754641 C 27.167287,48.064467 29.069501,50.011973 31.379328,50.011973 C 33.779736,50.011973 35.681951,48.109758 35.681951,45.754641 C 35.681951,43.399523 33.779736,41.497309 31.424619,41.497309"
+ style="font-size:45.290764px;font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;text-align:start;line-height:125.00000%;writing-mode:lr-tb;text-anchor:start;fill:url(#linearGradient1363);fill-opacity:1.0000000;stroke:none;stroke-width:1.0000000px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1.0000000;font-family:Century Schoolbook L" />
+ </g>
+ </g>
+</svg>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/laptop.svg b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/laptop.svg
new file mode 100755
index 0000000..06235f0
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/laptop.svg
@@ -0,0 +1,1568 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+<svg
+ xmlns:dc="http://purl.org/dc/elements/1.1/"
+ xmlns:cc="http://web.resource.org/cc/"
+ xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+ xmlns:svg="http://www.w3.org/2000/svg"
+ xmlns="http://www.w3.org/2000/svg"
+ xmlns:xlink="http://www.w3.org/1999/xlink"
+ xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+ xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+ width="400"
+ height="400"
+ id="svg2"
+ sodipodi:version="0.32"
+ inkscape:version="0.45"
+ version="1.0"
+ sodipodi:docbase="C:\Documents and Settings\Mete Ä°slam\Desktop"
+ sodipodi:docname="MyLaptop.svg"
+ inkscape:output_extension="org.inkscape.output.svg.inkscape"
+ inkscape:export-filename="C:\Documents and Settings\Mete Ä°slam\Desktop\MyLaptop.png"
+ inkscape:export-xdpi="98"
+ inkscape:export-ydpi="98"
+ sodipodi:modified="true">
+ <sodipodi:namedview
+ id="base"
+ pagecolor="#ffffff"
+ bordercolor="#666666"
+ borderopacity="1.0"
+ gridtolerance="10000"
+ guidetolerance="10"
+ objecttolerance="10"
+ inkscape:pageopacity="0.0"
+ inkscape:pageshadow="2"
+ inkscape:zoom="1"
+ inkscape:cx="319.93339"
+ inkscape:cy="202.90098"
+ inkscape:document-units="px"
+ inkscape:current-layer="layer1"
+ width="400px"
+ height="400px"
+ inkscape:window-width="1277"
+ inkscape:window-height="751"
+ inkscape:window-x="0"
+ inkscape:window-y="22"
+ showguides="true"
+ inkscape:guide-bbox="true" />
+ <defs
+ id="defs4">
+ <linearGradient
+ id="linearGradient3757">
+ <stop
+ style="stop-color:#70ffea;stop-opacity:1;"
+ offset="0"
+ id="stop3759" />
+ <stop
+ style="stop-color:#0055f6;stop-opacity:1;"
+ offset="1"
+ id="stop3761" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient3460">
+ <stop
+ style="stop-color:#f1ff00;stop-opacity:1;"
+ offset="0"
+ id="stop3462" />
+ <stop
+ style="stop-color:#8bff00;stop-opacity:0;"
+ offset="1"
+ id="stop3464" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient26774">
+ <stop
+ style="stop-color:#ffffff;stop-opacity:0.1122449;"
+ offset="0"
+ id="stop26776" />
+ <stop
+ style="stop-color:#ffffff;stop-opacity:0.89795917;"
+ offset="1"
+ id="stop26778" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient17245">
+ <stop
+ offset="0"
+ style="stop-color:#ffefef;stop-opacity:0.58163267;"
+ id="stop17247" />
+ <stop
+ offset="1"
+ style="stop-color:#ffefef;stop-opacity:0.14285715;"
+ id="stop17249" />
+ </linearGradient>
+ <pattern
+ patternTransform="matrix(0.9848362,0,0,0.9848362,-402.92422,36.839002)"
+ id="pattern13296"
+ xlink:href="#pattern13289"
+ inkscape:collect="always" />
+ <pattern
+ patternTransform="matrix(0.6565232,0,0,0.6651903,-8.1640579,-22.602821)"
+ id="pattern13287"
+ xlink:href="#pattern12311"
+ inkscape:collect="always" />
+ <pattern
+ patternTransform="translate(-88.774232,-72.100299)"
+ id="pattern12309"
+ xlink:href="#pattern11335"
+ inkscape:collect="always" />
+ <pattern
+ patternTransform="translate(-5.8654428,10.456268)"
+ id="pattern9368"
+ xlink:href="#pattern8394"
+ inkscape:collect="always" />
+ <linearGradient
+ id="linearGradient4451">
+ <stop
+ offset="0"
+ style="stop-color:#fffbfb;stop-opacity:0.82653064;"
+ id="stop4453" />
+ <stop
+ offset="1"
+ style="stop-color:#000000;stop-opacity:0;"
+ id="stop4455" />
+ </linearGradient>
+ <pattern
+ height="253"
+ id="pattern8394"
+ patternUnits="userSpaceOnUse"
+ patternTransform="translate(404.25649,166.01976)"
+ width="337">
+ <image
+ id="image4466"
+ width="337"
+ y="0"
+ xlink:href="data:image/jpeg;base64,/9j/4AAQSkZJRgABAQEAYABgAAD/4QCURXhpZgAASUkqAAgAAAADADEBAgAcAAAAMgAAADIBAgAU AAAATgAAAGmHBAABAAAAYgAAAAAAAABBZG9iZSBQaG90b3Nob3AgQ1MyIFdpbmRvd3MAMjAwNjow NjoxMyAxMzozNDoyNAADAAGgAwABAAAAAQAAAAKgBAABAAAAAAQAAAOgBAABAAAAAAMAAAAAAAD/ 4gxYSUNDX1BST0ZJTEUAAQEAAAxITGlubwIQAABtbnRyUkdCIFhZWiAHzgACAAkABgAxAABhY3Nw TVNGVAAAAABJRUMgc1JHQgAAAAAAAAAAAAAAAQAA9tYAAQAAAADTLUhQICAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABFjcHJ0AAABUAAAADNkZXNjAAABhAAA AGx3dHB0AAAB8AAAABRia3B0AAACBAAAABRyWFlaAAACGAAAABRnWFlaAAACLAAAABRiWFlaAAAC QAAAABRkbW5kAAACVAAAAHBkbWRkAAACxAAAAIh2dWVkAAADTAAAAIZ2aWV3AAAD1AAAACRsdW1p AAAD+AAAABRtZWFzAAAEDAAAACR0ZWNoAAAEMAAAAAxyVFJDAAAEPAAACAxnVFJDAAAEPAAACAxi VFJDAAAEPAAACAx0ZXh0AAAAAENvcHlyaWdodCAoYykgMTk5OCBIZXdsZXR0LVBhY2thcmQgQ29t cGFueQAAZGVzYwAAAAAAAAASc1JHQiBJRUM2MTk2Ni0yLjEAAAAAAAAAAAAAABJzUkdCIElFQzYx OTY2LTIuMQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA WFlaIAAAAAAAAPNRAAEAAAABFsxYWVogAAAAAAAAAAAAAAAAAAAAAFhZWiAAAAAAAABvogAAOPUA AAOQWFlaIAAAAAAAAGKZAAC3hQAAGNpYWVogAAAAAAAAJKAAAA+EAAC2z2Rlc2MAAAAAAAAAFklF QyBodHRwOi8vd3d3LmllYy5jaAAAAAAAAAAAAAAAFklFQyBodHRwOi8vd3d3LmllYy5jaAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABkZXNjAAAAAAAAAC5JRUMg NjE5NjYtMi4xIERlZmF1bHQgUkdCIGNvbG91ciBzcGFjZSAtIHNSR0IAAAAAAAAAAAAAAC5JRUMg NjE5NjYtMi4xIERlZmF1bHQgUkdCIGNvbG91ciBzcGFjZSAtIHNSR0IAAAAAAAAAAAAAAAAAAAAA AAAAAAAAZGVzYwAAAAAAAAAsUmVmZXJlbmNlIFZpZXdpbmcgQ29uZGl0aW9uIGluIElFQzYxOTY2 LTIuMQAAAAAAAAAAAAAALFJlZmVyZW5jZSBWaWV3aW5nIENvbmRpdGlvbiBpbiBJRUM2MTk2Ni0y LjEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHZpZXcAAAAAABOk/gAUXy4AEM8UAAPtzAAEEwsA A1yeAAAAAVhZWiAAAAAAAEwJVgBQAAAAVx/nbWVhcwAAAAAAAAABAAAAAAAAAAAAAAAAAAAAAAAA Ao8AAAACc2lnIAAAAABDUlQgY3VydgAAAAAAAAQAAAAABQAKAA8AFAAZAB4AIwAoAC0AMgA3ADsA QABFAEoATwBUAFkAXgBjAGgAbQByAHcAfACBAIYAiwCQAJUAmgCfAKQAqQCuALIAtwC8AMEAxgDL ANAA1QDbAOAA5QDrAPAA9gD7AQEBBwENARMBGQEfASUBKwEyATgBPgFFAUwBUgFZAWABZwFuAXUB fAGDAYsBkgGaAaEBqQGxAbkBwQHJAdEB2QHhAekB8gH6AgMCDAIUAh0CJgIvAjgCQQJLAlQCXQJn AnECegKEAo4CmAKiAqwCtgLBAssC1QLgAusC9QMAAwsDFgMhAy0DOANDA08DWgNmA3IDfgOKA5YD ogOuA7oDxwPTA+AD7AP5BAYEEwQgBC0EOwRIBFUEYwRxBH4EjASaBKgEtgTEBNME4QTwBP4FDQUc BSsFOgVJBVgFZwV3BYYFlgWmBbUFxQXVBeUF9gYGBhYGJwY3BkgGWQZqBnsGjAadBq8GwAbRBuMG 9QcHBxkHKwc9B08HYQd0B4YHmQesB78H0gflB/gICwgfCDIIRghaCG4IggiWCKoIvgjSCOcI+wkQ CSUJOglPCWQJeQmPCaQJugnPCeUJ+woRCicKPQpUCmoKgQqYCq4KxQrcCvMLCwsiCzkLUQtpC4AL mAuwC8gL4Qv5DBIMKgxDDFwMdQyODKcMwAzZDPMNDQ0mDUANWg10DY4NqQ3DDd4N+A4TDi4OSQ5k Dn8Omw62DtIO7g8JDyUPQQ9eD3oPlg+zD88P7BAJECYQQxBhEH4QmxC5ENcQ9RETETERTxFtEYwR qhHJEegSBxImEkUSZBKEEqMSwxLjEwMTIxNDE2MTgxOkE8UT5RQGFCcUSRRqFIsUrRTOFPAVEhU0 FVYVeBWbFb0V4BYDFiYWSRZsFo8WshbWFvoXHRdBF2UXiReuF9IX9xgbGEAYZRiKGK8Y1Rj6GSAZ RRlrGZEZtxndGgQaKhpRGncanhrFGuwbFBs7G2MbihuyG9ocAhwqHFIcexyjHMwc9R0eHUcdcB2Z HcMd7B4WHkAeah6UHr4e6R8THz4faR+UH78f6iAVIEEgbCCYIMQg8CEcIUghdSGhIc4h+yInIlUi giKvIt0jCiM4I2YjlCPCI/AkHyRNJHwkqyTaJQklOCVoJZclxyX3JicmVyaHJrcm6CcYJ0kneier J9woDSg/KHEooijUKQYpOClrKZ0p0CoCKjUqaCqbKs8rAis2K2krnSvRLAUsOSxuLKIs1y0MLUEt di2rLeEuFi5MLoIuty7uLyQvWi+RL8cv/jA1MGwwpDDbMRIxSjGCMbox8jIqMmMymzLUMw0zRjN/ M7gz8TQrNGU0njTYNRM1TTWHNcI1/TY3NnI2rjbpNyQ3YDecN9c4FDhQOIw4yDkFOUI5fzm8Ofk6 Njp0OrI67zstO2s7qjvoPCc8ZTykPOM9Ij1hPaE94D4gPmA+oD7gPyE/YT+iP+JAI0BkQKZA50Ep QWpBrEHuQjBCckK1QvdDOkN9Q8BEA0RHRIpEzkUSRVVFmkXeRiJGZ0arRvBHNUd7R8BIBUhLSJFI 10kdSWNJqUnwSjdKfUrESwxLU0uaS+JMKkxyTLpNAk1KTZNN3E4lTm5Ot08AT0lPk0/dUCdQcVC7 UQZRUFGbUeZSMVJ8UsdTE1NfU6pT9lRCVI9U21UoVXVVwlYPVlxWqVb3V0RXklfgWC9YfVjLWRpZ aVm4WgdaVlqmWvVbRVuVW+VcNVyGXNZdJ114XcleGl5sXr1fD19hX7NgBWBXYKpg/GFPYaJh9WJJ Ypxi8GNDY5dj62RAZJRk6WU9ZZJl52Y9ZpJm6Gc9Z5Nn6Wg/aJZo7GlDaZpp8WpIap9q92tPa6dr /2xXbK9tCG1gbbluEm5rbsRvHm94b9FwK3CGcOBxOnGVcfByS3KmcwFzXXO4dBR0cHTMdSh1hXXh dj52m3b4d1Z3s3gReG54zHkqeYl553pGeqV7BHtje8J8IXyBfOF9QX2hfgF+Yn7CfyN/hH/lgEeA qIEKgWuBzYIwgpKC9INXg7qEHYSAhOOFR4Wrhg6GcobXhzuHn4gEiGmIzokziZmJ/opkisqLMIuW i/yMY4zKjTGNmI3/jmaOzo82j56QBpBukNaRP5GokhGSepLjk02TtpQglIqU9JVflcmWNJaflwqX dZfgmEyYuJkkmZCZ/JpomtWbQpuvnByciZz3nWSd0p5Anq6fHZ+Ln/qgaaDYoUehtqImopajBqN2 o+akVqTHpTilqaYapoum/adup+CoUqjEqTepqaocqo+rAqt1q+msXKzQrUStuK4trqGvFq+LsACw dbDqsWCx1rJLssKzOLOutCW0nLUTtYq2AbZ5tvC3aLfguFm40blKucK6O7q1uy67p7whvJu9Fb2P vgq+hL7/v3q/9cBwwOzBZ8Hjwl/C28NYw9TEUcTOxUvFyMZGxsPHQce/yD3IvMk6ybnKOMq3yzbL tsw1zLXNNc21zjbOts83z7jQOdC60TzRvtI/0sHTRNPG1EnUy9VO1dHWVdbY11zX4Nhk2OjZbNnx 2nba+9uA3AXcit0Q3ZbeHN6i3ynfr+A24L3hROHM4lPi2+Nj4+vkc+T85YTmDeaW5x/nqegy6Lzp RunQ6lvq5etw6/vshu0R7ZzuKO6070DvzPBY8OXxcvH/8ozzGfOn9DT0wvVQ9d72bfb794r4Gfio +Tj5x/pX+uf7d/wH/Jj9Kf26/kv+3P9t////2wBDAAEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEB AQEBAQEBAQEBAQICAQECAQEBAgICAgICAgICAQICAgICAgICAgL/2wBDAQEBAQEBAQEBAQECAQEB AgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgL/wAARCAD9 AVEDASIAAhEBAxEB/8QAHwAAAQUBAQEBAQEAAAAAAAAAAAECAwQFBgcICQoL/8QAtRAAAgEDAwIE AwUFBAQAAAF9AQIDAAQRBRIhMUEGE1FhByJxFDKBkaEII0KxwRVS0fAkM2JyggkKFhcYGRolJico KSo0NTY3ODk6Q0RFRkdISUpTVFVWV1hZWmNkZWZnaGlqc3R1dnd4eXqDhIWGh4iJipKTlJWWl5iZ mqKjpKWmp6ipqrKztLW2t7i5usLDxMXGx8jJytLT1NXW19jZ2uHi4+Tl5ufo6erx8vP09fb3+Pn6 /8QAHwEAAwEBAQEBAQEBAQAAAAAAAAECAwQFBgcICQoL/8QAtREAAgECBAQDBAcFBAQAAQJ3AAEC AxEEBSExBhJBUQdhcRMiMoEIFEKRobHBCSMzUvAVYnLRChYkNOEl8RcYGRomJygpKjU2Nzg5OkNE RUZHSElKU1RVVldYWVpjZGVmZ2hpanN0dXZ3eHl6goOEhYaHiImKkpOUlZaXmJmaoqOkpaanqKmq srO0tba3uLm6wsPExcbHyMnK0tPU1dbX2Nna4uPk5ebn6Onq8vP09fb3+Pn6/9oADAMBAAIRAxEA PwD+lfSrfVX862m8NeKtZEEiS215pNhfvD4eWORy8dvNMFbxJpwkbf8AZzsRSzGGU53H2vwz4x+I WonTtGs9Nlhg1SLUZZdVn02TTLzSrywmS21Pfp98piiSSS6t76FSSSXlhw2045PwD8L9X1+4XXJv ih4oeLT7vypWjS5WSSRkJKW89zq0oVlDDJaM7Tj5TXu40K38D282p6d4m1ODTVunudTtPEF5Pqtn cNctHGiW7yuHsn3sVhSNtm+cZU1/gH4PeH3HOCy6jxLWqY/hLhydnWrUcdlHt8TgYVYTdSLoV5p0 qdNYmlOWJrurhqcozwTlChRw0Px3LMHjIwVdynhqD3anTvKF09HFvRLmTcpXimnDZRXiHj+XUrC0 j0D4rxR+Jnuplk0jxbpVpPpGn2YuN6PY3l60Hk296wjRkIUp+8AmIUb15LXPBdnaeHbm/wBA8VQW 99qdzpSwNqd3HpV450CymsbjS7iZpVSC/b7bbSPl9rqilQyMGrubvx+/jW71HQ7m+kl0XU9RSTQm vfBtrqml2giaQJZandWuqlLqCUlQJWEbwvt3YXfVLQYYvHFhN8N38O20+pwTrHbaDbwav4ZuLgc2 zXpe/S9FvdWUn2cRF5PLSKTY22IBa+Yz/KOGuMc9zOnllf8A1kjnWHr4LJMVjJzebPH0o1KKwtTG 4LE4zG4+VXCYic8DiMVRr4p061KlSoVasamHOetSoYmtNU39Y9rFxpSnd1edaKLnGUpzvFvklJSl ZpJN3ivKNP8AH/xN8FwWNhqUt3b6dZvusJr+0TU9MZdwkSGSZNyXFnkDY0Ugkh3nYcZWt24+OAuL 25h8SeFxDp89uWGk214L7RrlvLMkBm0zVYJY/IkkPM1s0TgMGG8jns/FH7PPxB+Gojm0fX7+00y/ kjt1i1OOG90eSaZfltdQaxeeBGJLLma2VG2kq2K841Pwpq9jpU11410b/hF9NimFvDr/AIdNrrOn 30wcs1vb6MjTfZwEEzNLBJbRxlTvjJIQ/nOa5J9IHw7jieG8zq59w9/Y0I1J4XOaFHMcFRw9OlyU 6dTMJqVHDYapSdlUxNPK6EqdoTnXtSjT4atPOcC5UKjrUPZWbjVUZwUUtE5vSMWuslTVtLvS0vhq 5+EnjG+uxfeB9V8O3KwtKsuj6re3vhu3LNtWbUYtiS6bbbyMsHMYGeBXVaRo+h+HZYtd0TRrLxLC qTW0d/4RmbWdNtJJPNSVNbm1W6luIYnh3KypbRgq6/vSzYHmupWXim80HUbHwra6Vq3g55IL6/m8 NSpPqM6WCu8cuuROI7pZlB3OHgWNCg8tQBz5jpGt6noF3LqGjajfaRfQqojls7l4GLCSM+VPGw/0 iIgMWRxj+8CowfgZ8d4LhTF5A8/4KwdXMF7TELPMFk2X5XWnVVVtVcFCnh/qGY0KUYR5K0fqzq1K skpUuRVJ8n1uGGlR9thYSlrL2saUKbbvo4pR5JxSSs1y3b3Vrv6P0bV/D17418R+RrGkQWF/ZXOg SJrdvJqeo6lfajiKxt9MFw0wuNNi1QW52uoRUgIKBSDXG3T62dMuofE1lDBbxaouiS2yQ29ldWt0 qxWyzaYkSqtlbx3caIWwI9l6ysG3k1iab4h8K+NtQtLXxhZ/8Izr9zdRpb+NfDUKQRPdySKIX1zQ 1IjbMpXM9sY3BO5kIya9f8eajcfD2S18TWOn6T4kh1lRBca3fFNStD4ksTDa3c9rarI8Vi08ETze UcN5yEycoFr6/CPDcU8K51xFUzmjT4WyTE4mtia+BVeco0c0m3OnmGS1HOtT+p1Vh4UqdKSy+s8V iZLMKslO3RHlxGHq1nUSw9KUnJwu9Kj2nSbuuV8qSXuPmk+d6m1+zr4oFt4k8T+C7i8muRdRrqlj JdbN73umKmn6gkciSMsyvapburKeVtjwMGvr+vzA0fxrqPh3xf4V8QzXEsljYazcXKQ4gRIrK4uP suqwLHbooiZrZnYoCU/eqy4yRX6cpOkqLLEQ8cqLJE4IKvHIodHBB5BUgj2Nf2d9DXjeln/AWd8I TxE62K4GxzVL2q5an1DMlLGYZtOrVbjHEPGUoS53ejCk7Q5uSP1HDOJVfCVcNzXlhJaX0fJU96PV 315ktdktrpE1YniHw/pvibS7jSdTjkaCdWMcsEjQ3VpOY5I0urSdeYLhVkcBhnAcjBBrY3j0NHmD 0Nf1vj8Bgs0wWKy7McLDG4HGwlTq0qkVOFSnNWlGUXdNNP8AXc+jlTVSMqc0pxkrNPVNeZ8b6v4O uPhdrnhyx8PXc+oajrN+lp4fvr8Wq2/h2yQLHrGqyRGNY7rXjDczKkm1xDbRM+AdoGZ8UfiDFqNh FqdlGJZ4dSu7W21BzzYWd9Dp9xBNNZuBHdaobSGzmt2iOYAwm4cgp9BfEO5snuIdM1W106OS/s7q 28IXk98y3tzr99YX1pqNulrHHugsI9MZ/Om3HcbtEUBvmHxPrOoHT4dFtNSMzxa/qN5r99Cthcos FrcRwaTpM1nY3IwL9U0+SeMYZSJ4gMoStf5neNeCh4Y4bizhHhPMllXCmdVY8mFSny5bUofUaVO8 cQ1NV54rEqvHFXq1P7MeDlh6tOjhcK4/C5rH6gsRhsNU9nh6jVo9INciWkurlLm5tX7PkcWlGJ6H 8MbctomsQalqF082uWRtrSV79WNvazqbKG6NrcuzQsItVlcb1ZPKcPwGBrbt9Ol8O/EptPm0y/vd KawTRY7t4Z5YdPjsbDNvvklPlvePqVvHOtw+VViGVG5I8k1HV5/DWu6Zo80qTWqXFpLLJbu7Ld6L eG0torOUnBu7hNPt4HU4DQXBeMD5ePT/AIivJokmra9BLc3/APausJb2OlK8kTzTaTHbxu2q3cn7 25hF7HEY7RAHuUdWEgTIPwXDmPy3D8J06UcJOOP8JswwU8TUcoSqKk446tiI1aUoVHVpV8TJYaXI qtZSnTcIzqUqduOhUgsNpF8+XTg5N2vb327qzunL3dLvVWvZHs3hyznv7s3erQ6lKdXliFppc15b x3VlYRzGS/OrrFCIprM3TLNbK6eYHuZYI5FXbn0PUBe6n/amlXNvYTaZLohn01VLL9ovhI88MLWj zZDQCC1cMP73DLjFfNeh6t4o0211K+axm1jxVq01vqCaNPNtezs9YsBaxz3beZvgnSKDISJ1EUVv KiBWDCP2DxVr2p2GkeFhoS2F1rfkM0Viv2dtNE2nQiHVSt/Od08KiVwIgyGUIHZwocN/XXA3F2U/ 6o5vVxWEx9GGEhGtjKcqXPicZSxOIqYVUKlqUYV8ROpWqVXgaU5TwjlhsKqUKcrVPpMJiaf1aq5R mlFJyTXvSUny2eiu223yJ3jdRtbfx+S01zWNZGj6n4chj0LSxfyT6/Pp8sP9m2txGbWdhNazBbqF JzMPs7EhwvzhFUEe46/4ftPiL8M7LTdN1h7rNtp13petugnkuJ9Lfy/OuEVMSTyLFOskY2/vHKkj k1y3jQ3ev2sukW9na6laNcaZeT6ANR/se6nhawhluVEkaNm0hS4jljZCxyGVg2xlPVfDK8sLTw1a 6fpC38mk2FrqsVv9r08Wl59r0vVLpLuNbL5XKuZo/JXbkiPLNvc1zcDcMZVh+JuMeB82lLPOH+MM txdDF4vEc9HE1XGrQwtPC4dUY06csLhKEnFV/bVsbQrVKTqrC0qlBVlhKFNV8RhKt6tHE05KUpXU nrGPKrJLlinvdyi2r8qav4+99fa29pamDVtM/sxby01/TvEMcclpqJSzlktvEWrJagHS9QlW3mC3 ERMY2pA52ygnrLrR5r3TrpLTxFcCa90eHTV028gtNUhE7JG1xHPJKxjns7mVSGWX7s8bAEq7GvIf iBBq/gPxVfXllq0Njp2saha3+n6ZfR3M13q+j62q/a9Fu7W5iZZrKC5adWTexgMygxqGQjvdY1fT dY0vUdZ0IyQeXps1pqEJuYoowI7f7VFFp13Am+2m85jLbyvH8r2rrlcbW/MMkzbC08VxrknEdGrU 4kyKpKliKU8VKjUr4eEK2HhXwksJOD5I0aPtqkJUaanKu8dDD1J1FJefTqRUsVSrpuvRbTTlZtJO KlDla0Sjdqy351FtnlelWetL4vjW5tdJ0rxTZA/abe+GnnSdVsUt2xB9uRDJo92bYxi2klZSFHlC c4RR6X4YiOs+DviZ4V1q3vPDHicaRHqWrXeopdzvcW9gjJp2uLGsjfbHFraGKaRZDJKIomcMWY18 9+NPFl3Nc6N4shMx1K70mPT7jUJDCx1K1+yW4S31iyfdHPIUkk3uOJQAxBJG33T4K/EjxV4suRp1 14fs9Vvf3EOuamq2dgg8MsBbRvKikNJdK0jCEbWjdIZEAVitfCeFOfcI1OPK/BM8wx9eeaVMxp0l UwssZSx+CzbL3h1KrHCxp18NmUaVSPtcTguWhOhHFe+3UlXqceXVsNLGPCuc26ntErx5lOFSHLd8 tpRna13DRpS73fz9o+pfDLSb3R1SPxV4g1C31W2vFuraS30iCOa3uYglha2VqZWuo5QqvvyrswRQ AN1es+KtH8Z67JceHNN0DUbafUZZ7ltOgtLbTtOs7DT7+J5NRijJQ6ncXET2o891aUNZCNSxY45/ xv8ACDx94Vv9d1u30O38V2Imujpeo6e0cN9pVgWk+zXMlnp6xSvfojoG2pIqLEW6sCv2b4L1K/13 wv4d1fVLE2WpXGl2v2mFmjlZZjFGJ2SVDlQzxgshwysNrDK8/U+D/hRm+d4zjDw74wwmJ4Dq4aFG rTpYTK5YRYnBKpPCYmU8bV9vDFVKkOT2FR4rGxjGrOUX7SnBUN8sy6rWlicFiYywcopO0afLzRvy ybm+ZSbWz5pbtrVacd8FvG154t8N3tnqkCW97oWq6lo9seVa607Tp0htpvJZB5bwLJHA2erQZ4OR Xf2usWt/faxpQfbf6LNax3cbgpK0V3As0F55LKN1rIVkVHGVYwtzxivnDxx4n8Q6J441y38G2ip/ YNtaeIHgtrGWFNbuY7S8ur+xvblcG9tpZbmBPLhwfOky/wA6Zr17QvEMXxH8Mwa5ohHhjxh/Z0sI i1SzWW5065jcrLaX1s+06hpAuslTkY3h1CSZFf1Z4f8AG05Uo8B4nNKmc8U8GPEUK1SrQVJ5zQwU quFqfU6kqsaKxNGt7FONWopVIxXPJRqVMRT+gwOLdlg5VHVxGF5k21b2qg3F8rvbmTtu7vru5Lnp /iDq9xq3ifw9plk1l4r0O3fVdD0/WUMFp4g0W3vGi1CxBif92zR2jTQ3Csz7LgOF2xyLWjca/quu 6eupWenf2t4f1G5t7a3uNEmaLWvDi3No7Xt7qMMsmy6ht7lYCstvktDcLKqEA5+ZfGniTxn4X8d6 ZrNzpF/eG1Aub7R4knuYNO1S3uJo7c6Vqaqz21tMXYuN6RyW16BIpB49f1jRb+wh0DxLpmq+K/CG i3k0msXfhO0gtJ7+3uruOzE/hTSrdZ1WKMvFfXJkG6OFFd0bbhD8ZkniBnec1+LcHVnj8XPhvEun iqDp0sLUjhK1ZvCYtrFQWEcadOvVw+MpOdLEzWGwrhh6VehVqvko42rVliYyc5uhK0lZRfK2nGVp Ll0UnGSupe7FqKabMDxL4z0HwPceBYL+xvTofinTpJb/AMWaTZWkNpObjagg1i2FkoujLcvcXM6o YmDpHIRJ84PIeMfH2g6d4ps/FXgy0S+1fwrFLH9nhkSKLVNLezjebSooooUFm8unMXRZCxC2rvGk hRCMjxB8S/C3xJ0TUdN8VQ+HD4n8LahcJb2WuXuo+GbbXdMDliLC+KbbDUxGIVnS5iaIhAY2G5iv jniDwZZ31sl1beHPib4at7VhdLNoejWnjTQrOG6iWU28Gr6TrCm5jEUiNGWIKBpFIUMAPyXi3j3O q0cWuC8fgOIcjrTwWMwUqdOVHHZfWwlONOpCVWdKrg8LUo4zD1MTCOJxM8Q5K8nXw1RVY+Xi8bWa n9UnCtRfJOFladNxSTV2nCLUk5LmlzX3vF3PtuH4wab4n8BzeKPA8tsdaubGzW2sNbjmSHSr6/vH sM6oLfmSGH7NeynYQjx2e5nRWyPlzSPFupah8YoNM8Xyz6v4d+Jvhu58JXlxrkyabCwme8Rbexby V+yP5+yGKOIsWe8DRu421rW1xoGieErPwQvim+1zxSNKvdVn0zU/DWp28dzZ6+0GIpbTSvNuXv7X TJwk8CmVYkuZpcgxvtlt10eC60PWH8Y+DL3UINR0zSF125ttS+xaVJbzrZxf8I1Lb6WLa48UG+Fz vjBKIly4IU7p6+tz3ifiTi6pwbXzLOsNRx2QrL8RmFCjicG8HUrxm1j6FfDLGVaXtalKrVwlenz1 Yxi1Pnw9G6qbVsTXxf1SVStGM6Hs5TipQ5G18cZR52rtNxkrtLe8UtfmeDRbDwVf61c3sj6Xe6Vq E6XZhuhqQ8HFXmS10bSbiQBNY8eywBlSUjy9Ni33En78ARdp8PfHdiFHjH4hWdlb/D/wtcLpXw60 t9Nt9U1LT/E0hjljl0a7vV825itYit7qUkjsjzPEQokZFG58VfhL4+8c/GDWdG0bQprTwPBqt5qU OpaVaxT6VY2lyTc63qlxHZyu13r894l2BG/+kTSqkIVUAC+XeK10HUpreO5XVtM8L+G7R/Dvh7wx 5Fs9zY3TRtdLeapcPOsNrc3N8IZdRuXdpGe4eFECRqR+CVcv4g4CzjM5YLLpZblOQ43E4XBQxdJ4 fDZpiqFVOpiaykqUa2X4S1LE2go/W8SsHyUVRo08PgPCdOvgqtTkh7OlRnKMFNcsas4tXlLa8IaS stJy5bK0VGnV1u6jhM4GvWWi+IYNYub42M2lx6ZqmttNvYX82taRDKqX811ueLPk74liZwHaIt1v xJ1rxD8P/BXh34cLql1b+K/ESf8ACXfEXU/NZrlZ9QG3RfDst+gIjgjs3MkwBwzSgtw5z23w6+Hn h/XvFN98VPE8uj2PhDwqLC6tIIruO5TxFr1pYLJExuEijivLRLm1l2LboGuJoVTZgfN4Xq8958QW 8R+M76+tINT1G+vbuDSp5r1JtXl+1W0Mmj291dyRLbW0FjOjLGrSoGsyqKGLVeY5fnGScOZhjaM3 hs14vWJw+X+zxFX2ksowc4PG4+UKtS9OtjpeywdD2apyrUPrsaVKo8RF1CpTrUcPOafJVxXNGCUn d0oNOdRpvSU9IK1rrnsm5a4J+NXxQXTINFk8Z65LZ2moR321tRmked7aNYYIJrkPvls0jQhYw4jO 8kqTgjY07xJpnj7R08AP4c0jQ9ZvL281jQ9ZsJZbS2n8TeSVh057Bn8m0t7+zhhtXZMbrmG2lYcN nx/UZYfNkihgtYNjHiLzZGViMPEZXbkpkqSAVJjypIOTSgupLSSC5tnaO6t5RNFNkExyoQ8MsYPK yI4DAjowBHSvxWlxhn8MV7HOM3rZ9lsoLDV6WJm8RzYVyiqlKhPERnLDz5V7lWl7OcJJSTvv5Cxd fmtVqutBrlkpPmvHS6Tldxdlo1Zp6ln7NqH/AD4Xf/gO9Feuf8Lv1b/oAaB/4Ar/APFUVt/YnAf/ AEWNf/w21P8A5cV7HA/9Bkv/AAW/8/6ufqJoXxC0Vtd8Q+Jbm81+zt9IsLp9T8KT6jPfPYXklzFE l5a6akzQtBIqyJIN6izui4chXVl57wv8QNW+M3jXUfDFxYR2Xge2NlrstjdQqdUEejTWzWtrLcxs FMdzqRhklXa+EQoj85Pzr4ktfEPw98e6na2bvaX+navqcuk3bJmDUdPu3M/2OSGVTHdW01u4zGwK OZGQ5BXH0R8DvGfgHU9YuZotJPhjxbcabcRapbQyyf8ACPPbw3MMxuNOiuZWbTwSAZIgypEFPBXB H73wT4kcQcZ8bZH4c8T5/R4Qo4DOsW85y6tCVBZ5JudKphPrEYOk1JyVPEZbKOGw1aH+0UJTjKnh 8J9PhMdWxeLpYLEVVhYwqy9rBpr23Rxvt5Sh7sWvei2mox+qI7WCJPKitrSKLnEcdvFHGMnJ+RVA 6k/XvXyx421/Qr34mx3Pg25vtJ8a6TZXmn65ei3l0xWkj2nSrqFJVVrmW21OOyaaQAiS2nV18xYm x7LoXxa8CeIdd1bQbHxBpyXOmyCOKS6nFpDqG0bbhrGe5VY7lUl4yjsXHzKNvNfPnii30zxH+0f4 ZeXVvDkmlQ614Tsp0XVbQT3CQvBLMrqmRNIZJCoBYkqFUelfvXjfxRlme8JcGx4KzXLc7oZhxRl2 XuVCrCc6FWnWqx9thsXRq82CqYarStOrCnUlUw9SdODjCtzy9jNsRTq4bCrB1KdZVMRCGju002rx kn7ji1q0ndNpaPX9M7nw/F8SvhtaaJ44sGhfxHoGlvrdmoEc1pfvDb3MphJBMEyXK5GOV6e1fAH7 WCeIfhp4s8JjwdHfeHfCtj4cg07TpNPdjpTzI7iWyvLdlaKacrE0jecrtN5pYk4OP1EZTnjucDkd uPWvgv8Aab+IXguePxP4Z1rTNX1TT7O3stLvdY0o6ZLBa61MXnt4LX7Rdqy6haM0BkG3b85VmBOD /W/01uC+HJeB+ZYzG8TQ4X42p0svw+Gz+UfZ47FPKfrGPp4WviaFN4inhqtX2+IrSpOnTo1Z+2lz csaU/puK8LQeUzlPELD4tKEY1npOXs7zUXJK6i3du1km79En8Kjx7b61p9vpeoqnhO7hvptRTxD4 YtTbx3V7coscsms6fbur+UcFibR0VSxb7O9N16PxHYWFpqviSw0nxZoF/I1tYeJbWaKQ3LRgM0cW r2PlzwXCr1ju4y6k4KZryJ3QOwj3NGGbYzgK7Jk7C6qSFfbjIBIB6E1oWGt6jppP2K7liifcJbZi JrO4VwodLizmDRTowVQQynO0egr/AJ/IccYrH0q9DiKtXxGJdOFOniaEqfK/ZcsYLG4GrGeCzCnG mpJPlw+JdSSqVMVUS5JfjP1uU01WcnKySkmulrc8H7k0l/hlfVyex2Wm6foOp3tq+lauNMuhPDIm m+ImWGN3WRCqWms248p33Y2idYASBluTXp+m+Jv+EU8d+JfDvi2wWXwj4uvZrfUbDVo2a0iaSZv7 O1xQhwjBnRpJbdsiOYlW3RgDxNP7E1wFVaHw/q7AeVE7FtAv5DgCNZZGL6NKxzjeZLfPGYV5rqfE WsarpGtvpOpaWL6xvLLS7oaBre+UW9xfaZah5tOukZZLOU3LOVkgcJIANwda+s4Zzh8PYOnn2BjR wVbC5jhHHF4WFSvgcSquHx1GthcxwE06lKliKUqlDEUoqCqUKr9jgq0bTN6Fb2EFVgowlGcfeinK DvGacZw3SaumkleL0g9333iX4K3TnU9Q8MX1tFpejPnXNM1u9WC68PCaFLhZ4r9k8rWtHa3KPHPH iTZxIm9TX2j8KNRa+8CaFBPqOn6pfaPbLouoXWmXLXdqbjT1VIgJ2jUyObJrRmO3BL8E18PQ+N/+ EZvdP8Ia/Pq0F74aligi8R6dew3F1pGoXe06nZ3dpOrQ67okUEkdu1vKTxBIY2AkIr6g+Cup+E4t W8XaHoN/dLeTyWut6ho11pEuj2sV7tNrf6joUMszj+zZs2jNEGIiLKY2aJlx/aH0bcw4IyfxOrVO FMPTyGvxJTqZbmuArY6MJYfGU4VMVRpYfB1VRcq1KrhquGqRw6rUGpSr4R0adWrgMB9Tkc8LTxz+ rpUpV06dSEp25ZJcyUYu12nFxdrrVuNk3CH0NRTdx/unH05/EUbv9lvyr/RXlb/4dH2yi32+88n+ K3hzTNVh8Oa5qUk1rH4a1O5me+gIDWUOo2MtqtxN8p3WiXosmkGQMDJIGa+HPFtv9l8Q63b6xfX7 2Wi2Hh/TrOK5jkN/dRjTrSOGSC7c+XBMsZuCzkuCrsFV8Db+hfj6/u9O8H69qViubnT7RbtYi+xb iOGeJri1dyjbI5YPMRm2sVD7gCQBXzf4w1LwNezWFlrNxaaYm2AaBHomsu1/BJPapp73OoxXdqkE ttBO7CHypEaRRvC7WzX8MfSf8P8AJM7zPEVqeZYTJM2r/U8dVeKjUhRxc50MTllONWtGpGlJU4YS hOEKiVqtKlSl7WGLtQ+Sz7B0qlSTVSNGq+Wb5r2k3GVNJtO2iinr1STupaeUeEl1CTxjbxWmnaZF c3gt/wCxdWvY2u5mg+xiK70mzNzIIbnVZBEVWVgwhdJCpQPuX2i41PT9SivfC9xrOoHxFZzapBb6 pZWotb3TTb2tpepp8EMAP9qx/wBkywJ5kTiQ/Y8xsgZmbzHUrrxN4cc6Qrtq1v8AaDfafdQb11BN IsZYI9RSykkPmwTyXKWtvdwRujR+XKghWMFn6fXPHWk3ltbajoT2SXnhy1F1cwedb2d1f3Dxw6Qk r6jIytDNHKVSa1dw0sYhkUOvA/G+Ea2W8L5Rn+VY3MJ4fGQxHtcXhcXRnD2+HrtSxlPB0cPXhRq1 8PTprEUswjKvXWG+r06EY1o0WvMw0oYenWpSqNT5ryjJWunZyUVFpNxSupq75bJWdjat7bVLCz1X StHv9EuZIbbTV1TWZZrPTbDVNJh+3/aLKNSHlis4bGcyPISzyzRlDtVjmLx4tzq/hzwYdGNtqUmj Xc3h672odKuvsz2sXk3qW10AiF7iwu3W4yqRi2JG7kV5rrOoQaXo9tqHhvTb3UL/AMR60NsFxqMd 1bWeoxtPJc6JcaQ0YM3mNPJMEwIpo5FlaRh8q9Nc6roWsaP4v0TRNeW7uNX0m7gu4GaRNviGzjj1 XTtK8OyROEurU/YtTEoGA7OsakxjL+i86wGNynPuF/aew+sYGEadGOMk+a9armmX0Mtni6UFXqVJ 0cOsZN0sZUhTrrETftvbKroq0Jwq4e/LzQVlzb6+0gqbktW2kpaSaTu3e9+qg8Q23izwZr9q95ca td+HtXthc6lFDZxTvArC7si6tHC13p1u8d3F80kUkpjM++PzUFetfD+DXNTvdH8TtqD3Gj3ej61B NavdXEv2aW61CxudOTy7obzIqJc7slzGJBGXYDcfifwHdeJW1nStO0S7uXaS5N7rurXM1tPZWNpL ZTT6l9qGyRJ7aHSILyR0cvtlZdoD7c/Xfw48R2F3NoNr4ZgvbLwrd+HPENxDYJZhYr+5tNetrQax IyRg2moyLMztbhgsUUo2hlUEfceBnGdHi3N8lzTPXXw+Mw0MPhGozlTeKr4TMMNUw1SnOc5yxFDB wx0cNmTrVKk3OrTlCderWlGh1ZRiliatKpWvGUbR3a5nGcXFptvmUVPlndt6pptu0fCPEHjF/EHx B8X+E/FUrwabN4kll8I6jrUcUaeG9Z0+Q2tjEWuQ32fQr024huNmdpaO4GCrGvN5fEer+HptZ8Ja 8osra4t4NN8SwRQOt1HLCYRb3KOz7XljSNXVEYxSLBwWSRjXffGTSPD+va+moWsFzofiTxPpvnp9 unK6Brd7Z3EmlXWnx3bRD+y9aS9sVUiZRDcNMhMsTPluBs9d0bxLHZ+B/iGNX0TXrKWHSdI8VXVp AdR0bO61h0zxMZSkmp+H43dQhZPOt1clZDGMV/OvG39tx4t4hy3G8SU3nEswxv8AZuaVKs4YXMML j51K0MozGpU9l9VqToYhfVZYlqH1bETwtSp/Z0sLiqHiYp1ViasJ106jnL2dRtqM4zbapzbtytxl 7vNpyycW+TlkuN1uKUW9wq3FjeWAtI7uy1DT2kS2jSCVY4YHtZhm0mM1zLmMHg3IXO1MD6D/AGcf A+qX+qTfES01aTQ9IgnbR4dPhhW5l1lYobb+0RcmVwkNqZlUg4ZhISU27cn58gT/AIRW88X+HdbK yjTpJtNkKWhmc3sd0qZt47ggfYpkt3dmZdwVI5Y8OFNdX4c+Mfi34Y2Ftpeimyn0yW3tL+PTr511 CzS4vx9qvWjlhEb28hDMsiBv3b7Rzht3znhdmnBvCXiDk/FniBQxdDLskdWpPDYV1HiMFmeGr1KW HU506tKs8NTkq0uT2vNOcacKnt4xnFc2X1MLhsbSxOMUlTpXbjG/NGpGTUdU07LV2vq7J82x+nDO JAXU4bOCR2KkFTjrnGR7/lXyT8YPF8Xwx1a2j0KW80geJ72zk1qS2huZ7OxtZrtZdb1Ozt7m4+zD UpohEmFjTbuLZLOaj+FX7SFvr9z4pHjdk017e0Gq6XZ6VZSTW8Wm2Mbf2hFCQzTXN2qN57mRuURv LUbCD4j8ftV8bWPjiw1m1vpv7G1uyjvPDGoac7yaLqtjcSSNBF5FwGhnuFs5LRJ0kQ5zuxsYGv7b 8YPG3hriLwhw/GPAeLq4nFvGQpfWKNKMsdllOderhalerQjXpVsMsXGHs6TlVouarUrzp1ZUkfVZ pm1CvlccVg5OU3JK6Xv005OLbXMnHmtZap6rVNo+nPi7pPh2PwOddt7lLQ6NJYa+VNw5/tfTrua3 trmO9t0lX7QJYbpWUqBiYADG41oeHviH8OvCXhTwyJ9Z8PabHcW9tbxWuhrLPHFNLZ/aYorhIxJK tw8UYy0xLvJIMkls18Aa1451Xx9BZWXiYmTUNHtlstNudPSK0tl0y0Cy3NlLpdqUS+PmRJLhNrHy j5RyFQ5s+sa5p2g6dNZfZ0SHU9ctLJ9Pijk+zwXtjaie1Yyfv4gqPcGN5D5kUgKoVMZr8hq/SZwu D4uzji7g7hDD0MHiMswuHjOrSnOt7ajiYfWKlXDUp0FRbpVIU/Z08TOFT2NCcqjnUao+Y8/jDE1c VhcLGMJU4xu027prmbimraNKylZ2Tvd6fd/jv4aeHfjRD4b+JHg/xDd6RdFAl3faYslte67pNs8g OnRq8sQt9bjnSSGF5TsBkKy5VVI4Dxn8QtU8I6H4T0r4geFNQh8K6kr6BrEc9xdXOuaDfRkXmk6r ZaxcEjV9QTTJkF18wWV7aeIEAlRzvwF8Vaf420K8+DfjSUKlzC+p+ELmxuIrfUbefTJGmmLzWUoZ NVhuI47mAucyrG+4Mo+b2g6D4qSC50H4j3fw/wDGvg1tRubLw1ZeJ7zy9au5ILWOPQY/7SEBSPV5 r4TJKJA8sYJaN3yQP2LLJ0OPuH/9fuB8K+G8746w1Glm+LoUo4jL1nGHlReLo5xldVzq4XCVoQgo VsLUxMsXRx7qYihKuqNdelBrG0HjcHD2FbGRiqs0lKHtY8vMqtN3cYtJWcebmjNtq9mfF3xn8L+O NEuYbnWZYfGfh37LBdWPi/Tbe1e6Gk3Qb7BFq1zbxvJbqYFOxrver8hZXwQMb4Upq+m6rb+JtJ1b Xm0SyWc2dlBqsmgQ6hqce3daarIT5FxpVsJ45r2TJDR+XCgMkscZ+y7jwB4e1sJZXlr41+D8fgS1 vVsNaivdLGjXOhzTC7ls01i7eYa5o8bHz0W4VYoFumhCkbkHG6v4h+AMsum6NoXja00u6kuhcW+r aR4T0270y51nT4AJ5gJ7KKyGs3EzRMhMbRxytH5AjLhq/NMb4M08o4wfGdbiehklF1aVTBUcdmlK ni62Lg4QqUsNUzOWBxc6WHxP7mFPMsNaqo4eVSu1UqU4+bUypU8V9beJjRjdOCnUSk5JpNRdRwk1 GWiVSOvuty1aXmP/AAkFrpOoJr/iC00zXNWvQ4OqWMUmieKrizN2q/ab64sI1TRPD5jSVBFPC+pa x53liGOKUR1q6p4D8Q+IL/w1Lpnhfw9HpqeIrO78P+HNcE1nP4e0m7mSS4ay8NxTQ3FlKba0guJI LiKXy5Y5XEktu5ZLviHTP7c0uHWf2eNXg8R+NNOu7jS/EkPitoLPx7p9xJD5KXuh6LrS29tpV6Ns ytNDbicAgRTYVhWTpHwg+Lnhi2jm0+8sJvHutNa61408W6/4it724gsbW7iuE8FaDbG6kuNQv5TG TqEwVEkBWzjkCMxb36OS5tVxFXLq/DuN4tyFqninjsqhRxGGrObhJRp5l7PFf2njKmIio4nD1JQp YOeHWKq4qtVpOpPRUqrlKm8PPF0NJOdNKUXe2iqWl7SbkrSi7KDjzOTau6XxZ8f6hp+u3uh+F/E1 3JpNj4h1G+1hdLK3eoeMNXSW5lvNBlS0uEi8OaDZ2MstuGkKPO6y3TxyMgevLtE8A3HxQ102l5Lr Uuj6Rb2Wo2/jRr+xlTSvBU1quoRzeK49SLf2vdW0dy1ujxETM1vLHgxxIE1fit8MX0XxH40upfBf xIv0vr/UPEEGq6ZpkGl+GpBcXTan9na/s0u5LhkhvLqENKkTB12hR38z1n4neJbLwD4Wh8O+Z4X8 JanceJfD2q+FtLvbtbe/i0q70+9K3epTubwzPDrLRuyyIqhSqRqmUPwXFmZShxRxBU8SMJiI5blk 511l1F4iftKcMTHCU8OpYiCoUcN7SrQq4jEUKk8Vy8tamq2KqV8RPgxVW2JrvMIydKneXs05XaU1 FRXMlFRu4uUoty6rmk5Sfs3jWLw1F4b0vRPBepax4c8K+ALhr+0J0C5XxB4gvbq8hjvtU0nVLu5a 0nnluJLF0uBte3jcqwRAQ3zDqqXV/Ot1Z6lrdzBHbTX8sF7Bb7LVbBC264/s25CxsLmaYM/kq4Mh kzJuJrIh8Y3OnXVxaaN9qOk3l8JrWK6na61i3s5x5Mllb3TuRHIY22BtmS8Eco2sFIztc1K3jlur KWSLXL1rh5ZtcLSxzpI+d8SSIFN4+BH5sko5dCiqAC7fl/F/F2W8SpYunhIZesNGnRlRoVK1PDRd CKp4aGHj7SSVFYalGjThTw8YKEFKo4SaZ5mKxVOvaah7NxsmouSjppFR125VZWikkru1zEvYxFcS iJNsAlbyPmaRGiLsITFO0SGdNi8OVXd1IB6UwzE4HXOMAE565PWo/M3tl2baCATkuQueqhm5HJ4y PrT4FaeeGCGN5pZpo4YYl+V5pJZAkaAjO1mZlHtmvyGUFVqP2cLOpLSKSvdvZJL5JJeS7Hl6N6K1 xdzejfp/8TRXb/8ACEN/0HdA/wDA5v8A43RXq/6sZz/0B/8AlSn5f3/U1+r1v5PxX+Z+qkVn4h8X eC9J0Tx14YsYda0eE22pnxJq+maTe3elW6SEaxp80cjXFheW0aRGUyRhPnyySITjx7UPhnqOkapL rXhPx54Sv7bRlSa41RtWB1CziuFISHVbK1t5xcqbZ3R5kVoZkY7hjq/UdMtrPxDpT3Ny2h+L4Z7u 00LXYp5bTQvFsds721tZ63e6isyaDq5hxDLA7TDawhufKJVqy9E1u5F06+FPDOnaZrNpPP8Aa9Bu ra5vdVhltpXkuf7A1C7nVJ7MFZC2nt5bp96Hzc5r9k4lxOQZ7XyvB8TZPiMRnWVulh6OPWNlVzef 1PD0fq6TweAwUamNpynCWIw2Il7aqowxGW16kMXiMW/o686NWVOOIpSlWp2ip816r5FHl+CELzTa bT1ekqbalKZVXwH4e8Qo39n+O/A9nrXzTPpNvPqr6fLEgZp202aXTw28tylsN7L8yxsylQuH/wAI xomh38Ev/CytAttQ065hn2R6P4nM1rdW8iyqCDpgw6uq/wA67W3EXiR59N1r4c6XDqGs3djYaf4z 0rQNQtreDUtTuDHa2muaLDcRC3uHnVkkkgCSR/6zy3Qgn6N8Ufs66LqHw503w9olvZ23izR3/tCD UYzIE1PUbnyv7TsJrm4ZpDYy7Qtv5jMYTBEeBvzy5D4JY7jzL87zvgrg7LMxxfD+G+tc0q2eYWti cTGq1SwlPB/WaEaeNqUqdWtGvQr1sBUlCFHDy5nOcZoZVPGwq1sJhadSdCPM3etFyd9IqKkrTaTa abg7KMerXvHxK+OOpaZ4Q8KeGtG17T9K8eeM/A8HiCLV207VLpIrcWolurzT7RLYtHcyW0F68YkI dG27UZhkfmJ/wj3hrVL557/4saGZLy4ae5vLvSfE7zSTTuHmnk8yxw7licksMkcn09f/AGsr/UdE +KmgWdi91Zy+EPA/hDS7W5h3ILe4g04SSLHKBt3bpcMOQQSCCCRXyOZcsc4JzzgjqeegFeh9Lvxm zbi/xTzLhni/KKfElPw4xNXKqFLE4jM6WHjDDUcLSrVY0sNmNCP1rEYyli5YrESg6lSmsNT57UTT iXNKuJzGph8VTVdYGTppSlUUUoqKbtGaXNKSlzNq7XKr6Ho954R06OeaHTvH3g3UhHK8cTvc6hp3 nKGIR995p4jQkYP+sKj+8RzVF/AnizYZrPTBq8AyfP0K8s9YQgE87NOnkdRx3UdK4MyEck/pSxXU kDiSCWSGQHIlhdopByOjxsCvT261/JE8dwxias51+GamXwk24xwWOqRUU3omsZRx0pqK6e0g31kt z5tzoSbboOH+CbSX/gam396NO5tb6zkaK7sbu1lQEtHc208DrjqWWWMED8K2te8QQ6vZ+GI0F6Lr Q9CTSLme4nWRJXh1C9urdrML80MKW1zEgDEndGcAKBUdl8QvGenRyQWvibVvJljMUkNzcG+haNhh kMd+sgCkcEAdKxJtWW6wbuwspHBJMtvAthO+cZ3G0AjbGDjMZxuzzTlVynDYPF4XJ80xMVmsIwxF PFYSlGEY069OtT9nXo4ivOUlKmm5/V6LSvHWM2g5qcYyjTqSXtFaSlFJaNNWalJvVb8q7dSOW4aR 3kkO5pCWYuWZmJ6lmJyzEnJJ5JJJr6I+Avi68X4h+FklvZTKfM0O5hknYxahpVzavb2zhGbaby1l Ft0ALwRg8mL5vnO5l0owxPZvfLcl2We3ukt2gjTgo0N1E4aUnkENEgGM5PSk0rVptJ1LTtUt3aO4 02+tb6J1JV1ktZ0mQgr0OUA+hr1eBeJcXwJxpw9xDTrOvTyzG4PFVVSqaVIUa9Ov8SvaaSaakr2l OnOLhOcJaYTESwmKo107qnOMnZ7pSUvv+XdNWbR+3FMLgHA59f8A63r3rPsLyPUbCy1CE5hv7O1v YiCCDHdwRzpgj/ZkFXM46YPTqB+Pb1r/AKB6VSjVpU61Oaq0q0VKLWzjJJp/NNNH7OnCyknzKWxk eJRcy+HddSxm+zXraTf/AGS4IQiC5+zSeRMQ4K4WXY3Ix8vPFfnNFf6R4g8M3cd1f2Vx4n0k29xp ccjyva6ellcWGmapcahcxsftFtcC6WQMx2o9p5gOJMJ9+/Ea6a08AeNblTsMPhbXWDL8pU/2dcAE MOhyRivyH0u7+zWerSNE432kdslwjMJIrl5QVKOpG5Sy/OpJG0A8kCv8/wD6ZfE8Mm4m4Jy+WDjj aGPyrNPbQrTm6UVKVNUqtOnFOMcRSnTlOnVmpRjUVKpyqdGnOHxfFGJVLEYSChzRnTqXTei2s0u6 aum9nZ2ukz03VvFeq6rr8t3ql4dNt9Mv9llDbSKXL2aGaNlc7TfRGCIAyvkslygYyEqKxNP8T6nP fzx/2dHqN5qd+W1C0ijf7XqjTS73tY4IVKTXAumeVWaMlXQH5kUKOW0nW9TEtlYWKW0l6LhIrBf7 MtLqe4knlK/YZZJIWcwM0zgAZ/1hU/Ljb02oyjwtM2k6MyXHiXUUMUt/bGEpottdBopdG0q6j+W4 1LJlhurtTiPy2ggbmSQ/wxDM8wzRzz6pm2KjQhiHUxdScY1Jzq1opU8PRg5yp1q7SnRpxVGjCNJ8 1VewnPk+RVWdS9X2krKV5NpNtvaKV2pPRpaKy30vbtNalvdBmvtM0SefWtT1yP7VrepWZ82HS7W7 Ut/ZtpaWRYWt4qtKl3eJvUbWt4mMfm73eAdG1HTfEGma7frHHDZ6hZQaTBd3VtaRStPBdtBqCTtm KS2tbWGWecHaGHynG5iPKLC+lt1tooP3N1ZmRYdWC7fs6zTOhtpUkYCez8xtwbDMhduGU7R7J8MN C1fxTrEOqa1rljF4ZA1OLXb6FvtBciyYtaXVhLDsiMml6fcAEIiJbRSDcuQrfXcIuPFHGHD31HLs TUxdHFUp4PC061P6tg17WMpVa1aulObo15+3rV6vNSm4urVqWToR6cO/rGKoKNOTlzJwimuWOqbb bs3aTu5NWe7fReiaqH8IaHrOseELU3MPxBl1K10NdSiVIfC+g2iOniRZo8/ZLiN7yLybcKrK1tuk YkGuy+AWra7ea/b2N1f201np/hzWNUW10iMR6YRqr6Qtvb36gqg1CKeO5JEaYjM7oCFwK+b9T8bw eK7nx7b/AL/TvDV1baPNoVqqR48O6fpUy6Xpr21lhjJZfY7pBc+UUlkWUyfMylW734Sz33gPwxZ6 xFFGk3i/4laH4el1mzeO687w1YWcmqXi2LEbfLluAytu2t8jBlV1wP2vgnjHBLxR4bzDKalenwbk tPEVa8cNUlToQ9hjqjlKnhoxT9jmmYxo1qUsTU5KGHr0cC5OGB5D1cHi6f8AaFCVO/1WkpN8raiu WbvaKW1SpZxcnZRkoX9w07zVdE8f6P4j8Esr6nrPh64n1/wjpXnww6kvlSXH/CS+GdM1ZoGXWgkC Ry24KrK625QEPGrN51p+vS+I9DHhjWBpGqXFsby602+vtXg0rX7nSlijd9A/ted3lhurdlnaK2u1 lgkBdFZWSMt5Vr8txofiaW90zVJ5l+1x61oOtRNJBcT2txJ9qsL5TuzFcqQFlGSUlt5EJJU16Hd2 8nxStG8XeGLa2tfiLpw3+K/Dto0SXHidChz4r8Nac3+tvNqSC+tYgSsmJ4R8zAflC4qzLirHZjh3 hFU4syunVwWIwdFU5vO8ppVpVIxpNwr08RjsvppLDUZKpRq4KjQWDjCOGnh8X5rxNTETnHlviIJw lBWftaad7LSSlOmvhjrGUUuW3K4z627stK+IdtpdvpOoxR/EvR4INOh0XXIbXTrnxfoVtp+21juN QhuXtLvXbazVxFMHja4hIVkWVVz4bqmgeK9NtfKvdPvXsY1WRZ7YDU7BcgFUF7ZNLFGy+YwK7lKs zAjcTWPf+bo0ulNbw3Wm6nbwrdS3LSTwXkd8t1NtIjZVNpLEIUA2/NnLE5OB1+vyT+ItEufHnh4X ljPFLbWPxB0/T5ZIbaDVLhM2niJYrYqq6bqEsMzSIV2wXiOo+WSOvks2xeXcYUMwxGKyurg+Lcso +0xCwdeSjjcJGjB1MTVoV6M51cdhYwg8xlSrUadehGeMVGMqGKrV+WrKniY1JSpuGJpq75ZaSjZX k01dzjZc9mk1edvdk5cx4efXbTXtIudI0+4u9SjvYja2TWsrreYG6S1kRkxJBLbCVXBP+rZicDmv uDXtL0XWPhlf+BDa3Omp4at7DXNFsJbe6vNW0X7JqUp1rULZrlWOp6JE+oW8aLGxkkhEkeMqhr42 8OeNvHd1f6dBBrer39vpMbyraNeFALNZoZ5bUXUkiNEZpooIg/mBx5pVWCsyn7u+EHhHxpqvhnVb z4h+I5NQtPFNnciz0WFppdU0K2vZkaVE1+dvNQmBEj8lA6ARKwkLjNfvX0Z8lw+dQ4l4ZybA47OM PxJg8VQxFTFYTD0sFh6E8NGNZTqrFyqRVfFLDJSozq1J1MLhqv1SLoc9P2Mhpxre3w9OE6scRGUZ OUYqMU4pO75rrmly7XbcYvl0uvhHWotC0HVrjUJNasfE1zFNnS7eF7mwtzDFFHPBfakRaAzB28yL 7KPLk3KPOaP7lYPiDxDe69Hd6pJbWf2rVdZ1K5JsYFQQgWtlLNDDGBlUUupO1QOSQQCQf1Et/hJ8 OYFVZvDNjqhj2lZtbe61ifKII0DPfyvgBQABgDjPXNeQfHjwf4A8HfDbUvEGleDfC1pqWm3+nnTR 9heCJrm/uo7SdHjtJ4jODbMxKFtjeQu8Mq4r6biz6LnGGQcNcS53iOKMqy7JcBQr5hXwuHjjJy/c xdWcnWrQqVa1WNF1oUuebSclGFlKRvi+HcVQoYitLE06dGnGU3GPPf3dX7zTbdrpX8rdT4Z+G8Hi dfFuha34Zilt59M1aymGryeXb6bY7pljlN1eXLLEymFpVMRYtIGKBTnFfSvjdrnV9C1H48/Dia61 jUJ5jYeL9Os77Um0Xw9qumRQxz67p2jyRxvqtnuFvIPP/dwiQTGJ1ZtvyZfeOfEN7eaffG4gt5NA lF5p1jDHDDo1nIghjD2mikeRHJuCkhVO7JJHBr1/4AfEzVNCW58GaZrFtpep6prtjrGgRatg+HNc uvJfT9W8La25RjZJfWZh+z3GNkNzaJ5mFcmvyzwo4g4aoSqeH+Ix2Np5Xn9StXo47kpRrYTNqeHh TwGMwGGnVVKFaXNisHVpVK05YmM6EYVaNVUpUfKy2vh4v6jKclTrNtTsrxqqKVOUIt2Un70Gm3zX jZp2a7bwR8aJ7jXj4Y8X/b9d8JfE/UW0jUoNVuzKnhvWNVgj07UH0/z1JOmzNdxSrbMBEsc8bxHd Gc+OfE/4YTQvqOsfD3yvEXgvStQl06TTtOS8PiPwjOXKS6f4p0K5T7Rbzvd28xFwBJHIFB3KoFfU niPwd8PviF41huYL278G/Eu80yDUofAvinH9jzSaNLd6TYJYwWCL5eoW76V5pihd2kif5VUNvWDx LDaeDPEkln/bi6T8UviHZvrnh/U7/TGl0jw1rlsl7YWtjdavZzOt/fS/2hq9rZTSlvsiSx/afM2x Y/dc58P82zzh3G5XxnmuHz/I8rx1SGAzujVowx1KOIjzQwlq1WLhVr46VCX9iY5RqQniko4jB4fD RxC9etgqlehOni6sa1GnNqFaLippS2hZvRyna9GdmnL4oRipHzHB4k0/4a21lb+KfO1f4i3Nq1tN q2lPZnxF8M9Cu4RF9kTUJ1ePU/FjW7tiK4ydOjfy1mjmciPyjXNG08xjUtI8R6hc6JM0zDxBeW1x NKt00kzQWuupZXc0uiahtKKA0ZSbJlR5Ewa+htJ0Xxn8SR4hivNL8Hy6zbXLWniaPWPDWkImo6tD dxI14l9ZxWeoaZeCVV+028hO4Xbz27scxx+UhPDPh7WLmGS11PTNTtnube/tPAaaxKL22KMbiz1P SvHS+S9gtqszMyySBSc4bAavyjPcixOIweV+2jGjwnUcoZbUxlOphsVzwkqdZylCvNY7E1FShLFy rVKFXmhChhp0cFSo0X5FehOUafMlHCy0puScZ3Vk9m1OTt793FvSMXGCUX1eqeLPFHhvW/DPi/wt 4p1az1jxN4L8Nz2FtaaldXOi6ld22nz+ENTil05irXEx1PTY7gM8RRfNbcu4BzV1nx9canoPhy3+ J3w90Lx7cvqfiW2m1GKS58J69psltFpImU61pXlw3OpmNnaR7uGRi1sodmKNXftoHhbxL8NNB1Tw bbaBqM3h/X9WlsdV1YMq+GdM16FJPtGseHDqyJaRnxBZzouGntopplliiCSlU5zWvgZ8WfE2haPp F35c1tYaE2opeapDqdpaXF/d32p6ns0qa3gdL25/s6W1j8gK7BUyGGxQfvcXkfHUaOOWSfWeIMFn GEoY2nh8PGGYZVVxGJlg62KlUoYyFXCTlUrUsTGlVhQrUVClG0vbRkod06OOcZqjzV4VoRmlFKpS cpODleM04ttqVmoyVkvtJ2wrj4ZfCHXtItfEfw68U+Iobq4uW02bw9q154dufEOk66IRcrYWsF5N Yw6xLJEkphlhvD5gRhFG7qQvh2t+F9J0K/8A7O1g+OtLv5SfJi1fwla2Uk53kGWOGTXN1whA/gZj u4ye/Uad8OfHXh3UIrGBfDd+Naa7sbvw9qepW8UWqWdkGuFe403UPIllgZUaS1uLcGWKRCUeORWW vTbfRfF/gGxs5Y/FuiWei69b3L2PgfxjrMWr2V55iqkkPh3xTYCRNHvGjd/s955mmTebABmRlJPw uIyHD8RUFisXwI+Fq+CUY4yph6FT6pCclTSqRw88Rh6adZ1KfPGjivbRqVFToYOpFQiuCVFYhKUs C8M4fG4p8i+HVRcorW6vaXMm7Rg1ZHz7deGtNtBC51LXHgusLazv4QvrOOWfJEltuvL5AZkIGQhc HPBwM17p8Dvgxa/EXVln0a416XS7SK6tdc8R3+l2+l2GhzTxxKv9jFL2c6nrZt5LkQoxVYWdbiUB UCseGfhf4h8e+I10PwNruo28vmQ3Hi/w/wCNbr+2JfDVpdTlJtVtZ3gez8T2LQsoSVAl2ZSYmT/l qe7+M/xm0f4faLB8Hvg1eRWcOlW11o/inxHp8aQzSTtLL/aVhZOqgRXclzJcGeVN3leZ5EDLtYj0 eGODOGOH4YvjrjjL44XhHKZKGHowlOVfNsapJxweAlUxM3FU7SePqVaUKuDj+5l7LEqU6WmFwmHo RljcdTUcLSdlFX5qs+kIXm9tXUcknBaaSu17x/wpL9lr+/pn/hVt/wDHaK/KTf8A9NJP+/kv/wAV RXo/8TAcFf8ASP8Aw5/4Jo//ADGa/wBu4P8A6EWH+5f/ACB+tfijxHovia6sjqMUnhm78RwYm0bx SjHwtfaxbottq2k6gbiAt4W8W29yAIrwIFmimgkk3pIVrjvE3he4t9JvrvVtOvVvLCSwsLLVre5f SPNhlDRQ6P4vNrdiKW5MexdO1OHfbXShY5WjxhNnwX478OfFzw7beBfirc2ra5qU5j0HWFlW2uNR vrFXt4Lya7WELY6ud4jXdvjvEBVkD43ZWmat4m+Gt5rPgzVbOfx54dtI5ILjwhqoSDxLZ6dcCaL7 RojSho9a0mSI5AtjImN26C2kU42zZ5JxRh8PxLjcbHNeHeKqcqazKjh4OvgMxnh3UeHzfJqf1j2c 4yk8ZQq5e6k/ZOrVjQrRniMbW66vscQo4iclVw+IVvaKKvCo435atJc2qfvxdO7tdqLTlN+5/s4T a9rdrq17q97e6hpOlTWljYx61B5l/b6tbxDeiXksQkkW1tn8rDu7I0u4EZFfWlgnmX1mn9+6t1/7 6lUfyNeeeAdC07w54T0fTtKgvLS0e2W/W3v5DLfQtqAF0Le6lLEySQxyRwjczFVt1XJCg16NoeX1 jS1JPN9bD1/5arX+hfg3whi+FeDuDsizLHyzHMoxozxNWU6lRyq16iqOnCVVubp0VNUad7e5BPlj flX3GV4SeHwuFpVJ887Jyd29W7tK+tleyv0XQ+Kf2zfh34hk+Id94v0GW4vNP1yC1stT0uKaXzRf 6VaJt8iD7k6PaxBwg+ffC5QNnA+IvEmvR6xd2/k6Lp3h+LTbOHTVsLCBonJty5km1B3Ae5vnmeQu 7AHkKAAor9lPjB4dtfFkfirSLixs9RlaWS6023v/ADvsp1exAuNMeY28iOIxdIgbawJR2XOCRX46 zeIF1ia50vxRb2UGqQXdxFb6lcQNEbaRJ3R9K1SaE+cLNJAUimLPJbhQHEkedv8Anx9Njw0wfDPi hn2c5fjpYDB+JmMxeMdOpBVKEsbh8Q54il7eUFPCKrVxP1mMIVJ0qtSq1Up0Y0ac5fE8WYCGGzGt WhPkjmEpTs9VzqV5LmavG7lzWTabeqSSZynnDv8A174ppk56+/H+evJrsvEeheF9L8PWFzBquqWH jFLl4dZ8KaraedE9tLmWz1bQtXtYRFc6a8BQguxL5yjHHPnhmzxz/wDq/H3/AEr+Gs3yDFZHi4YP GTo1K06VOr+5rU6qgqkVJU6qhJyoV6bvCth60adejNONSEdL/JVKUqUlGTTbSejT3V7PqpLZxdmn ui+ZfQnNN8388+vc8/4VQM2ep9MA+mTz9aj87Geh7jv+HFeYqPkZmg0nPXH0z69/XpTPO7ZPOfTk c9M1Q873/QUxpRnrn6+nt6d6tUull+YH7F/BDWRrXwn8DXpcySJokOnzMWyfO0uSXTnBPri2X869 ULkjgY/Gvlz9krVftvwmW0yC2k+I9YtCOuEn+zX6Ac9N109fTZckEcc/X/Gv98vB3M1n3hV4d5tP 362JybL/AGju3erTw1OlVfr7SEr+Z+y5VVjWy3AVWm5SpQv6qKT/ABPMvjdfx6d8JvHdzOSUfQbi zADlCXvpIrNAGwcHfMOMc9K/JCAXup3Vvp9hBNcz3Mois7KFd7mSTA2xxpgKThSzYwAm5iACR+mv 7Tj3k/wuudGsI99zrmtaVaF3lSC2tbW0kk1O7vL65lIS2so4rPMjuQoyBnJAP5rXmt2OiWs2j+Gp /PluI2t9Y8SbHin1CNv9bp+kI4D6fopb7zHE911l2RYir+AfpsypZh4m5JSxlf6tlGS5PQjPlt7W vXrYrFVpYehFr3peydGc6kr0sPGcZzvUnSpVfieLJqpmFJTfJSpUle27k5SfLH5Wb6Rvd6tJ7c+o WnhSCew0i7hvPEU6Nb6rrdqd9vpkbhkn0vw/OvDylcpc3qkbwTFbHy98knM2d4jCK0u4jNbudtu5 BM1ozOSz22W2vGZGy8bAq3ONrHdXNCb3A9t2MYzx+dWIbqRSojkmMyOjWggblZ96jIUgndjgbcHd jOa/iuvmFXFV6PLSWEwOGThSw8VzU4wbi5pqTftKlSylUqzvOpUUXeKhTUPlXUba05YR2j06Xv3b tq+rtskren6b4Z1u/u4PJ1bTIIoAs0er3t5D9gt9NRJJHunRVklto4hG7NG8QZMjdtYqG9CtfGKW 3w78X23hm3uRbQxaf4ZOu6hOZtR1O41i4uLzVLmwtSBFoNo2n2V4rRpvmddSVXlONteYW8F0mkwQ yX91ZLe+Y+sfZYYLp9Ru7y/RLHSm2MDdX4htLmTypDthZSXdAWx9aTfsq/E/xV4S8Mz/AA1tdBn8 F3Wmrq9wl9rmmrqGta7dmWK6v5GhXyWVbWO2jt1xEI1Rhsy7lv6D8N+BeNc+o59/xDrhXMM4zOll tX61SwcHjcc45hSeGpfV6cFKeFo4WUvaYjEKMa8p0oYdTnG6qe3gcJjK6rLA4apVqKm+aMffnaou VWS1io3vKXxXSjdnxFY300F3FJbxCR3H2ZrbaxS7jlURSW0katl1kU4IBHJyMEA19xeG7Xwj4Z8B +H7KO6j1GXQpNS+KfimwRY4pItH1DTtY0awuLW4upW869s76C2tlETNvkkDtmNg1emaf/wAE9hf6 RHey/EXU9J1++tV+3Wd54dtWjsbqVg9zbxva6jh4wQIw8bFSmSuAcBvib9l/4o+EJb27tYNM8b+G I9D0XwbJYaHGkevN4HXyLXW4ktLyLdJqioiXMRikY74So7Bv3Lw7+i948+FlDNOIOIPC2tjsPmGH hGhWpTwuYTwcG/rk6s8LgsTWxEF7TCYaOLhPD1HKnKWHUP3lSS9fBcPZ1l0alatlzkppWacZuKvz NuMJSkvgjzJxenu21Z8HXGivq2gTzaJPNqumeGZJ7yG/NjNHMNG1B4ZLu2voow5truzu90jx5KyJ dzTQsyIxrg7DVbvRNUstV0m/MGoabdw3thdwM8c0Fxbzb4pFJUFTuQEg9VODnJFdDqtprXwt8d6t orXd5puoaDqr26TNFLbyXVvFcLJaXTRSp/q3tGSQhlZWV2jZSrMpxfEOHt7TVLS4RtM1ZZbuKzSP edKvY5Vh1DTpJzGNipI0JjJJLQzwk5bk/wAX5xgXSrV60cJVyTibhqo6OMoKbvQnhKyo0alCbqqp Sjh2qeGcJe0qwdOhNVKjnUnH5OqrNtRdLEUHaaT+Fxdk1rdKOkbatWi7u7a+pPG/hvSfibY6d4q+ Hkfh6x1bUdFk8R+MfCV7dSWN9rFwszvqup6LeXcn2a6WC5huRJ9n8mSNmJkJDba8i8Iyz+EL/wAQ jf5Ftf8Ahu8nutH1Zgt4lvZXFpdo0tg8ax6sfsiX/kPH5tvcRzHeqozV5po+u6uttbWmn301tf8A h+8m13QJoJSl5BO6wLqFpZuDk+YkEU3lDIdrVxtJkOfc7TxJ4S8U2nhjUZZxpcuqS33h3xNo2qPG vhaLVri1uYRc6Df+RJN4Qv7mzvvPiKg6eGjlgKRiIZ/YsFm2SccZzQ4owlGlwzxbCFGpWkpQo4TF TqRpYTFVcNSUYrDVlWrVKmMoRqTjXpVfrVDDKtOrBenGrRxdZYiKWHxNk3qlCTaUJOK0UXzNuUU2 nF80Y3bOfk0a2i1jQ9U+Ger29rZ+IdU01rfTdftrSWO31dLphp4hkuopIJoxJLJLBazuJUe1eMtc NEHP6WJqFj4T0a0j8S+J7czQRQxz6x4gv7CwmvriNQ085DNEgBfJCIu1FKqOma/KSy+2+ENe0+HT 7LVLbXdNvYp77wf4lt4kGsR6deQahZLpd7bAJqV2s4neBlWOT7pgMm4o3QeLtd1Hxt4cvtT8aXs/ iGGHUpdT0bxLbskV94ft9UnksLjRdT0jys+Vbaktpm1Yq4hnaSzlaNWFfqHhN4oYXw0wPGeIw3Dc nxHjownHBrEVqOUYX6tTlUxcnT/eSwrqTqNyisPD6tW5aFZ4SlUhUq9+WZlHL4YuUcPfESSahzNU o8qvN21cW76+77rtGXImnL718U/Hz4X+GNOXU5PEI1q3lle3jPhuB9XxcRkB4J7mHEEEg6hZJFZl +ZQy818E/Gj45eIPibcpYQ2kGl+D7aZ5NMtOJmvZwrxi/vL50XbeGCSRVhVV8oSFcFiWrzHSRqnh yddO1SQW/hrxUsVt/aihbrRZQsjLp+swSsjRuLa7bMisokETzwuiliBzWpPrPhm9vNPuIYbSeKRr WcW8iXWnXckLypLLGySvBcoUYr8oI2nI2MK+U8UPHzxB8Qsk/s3HpcMZDXkqeNwmDozjN1ElUpwr 16lWdSth8RDlq0o/7PTm4zVq6o88uXMc8x2Oo+zqf7PRdlOME730a5pN3cZLVL3Vo/isYk08RLtE jICz7UZvMVFz8o3MoLMBkZI5x0Fbfhov5mtujQxyx6HdQR3UrMsFkdQurLTXvGuI1YQKkF5NlyDh S235ttc5qd+l7M939nitnlYtNFABHbeYCAXghA/cIR/DkgHkYBwJ9Fee5kvrO0kZrq8064trOzG4 i+nuJIUa1jCuALgwiRowQS7wqigsVFfztlUI0s1oumvrFpT9m4x5XKThJQcYuzU+ZxcYq757Rhd2 Z4MNKqt729ul9NPn2XfRH2l4Z1/w8+l+DNV0DWNL8W/GDR5r7w7peseI0urKw1yy0m5huptJ8OXl 9cbLbxJ9j1aBbK5uVje6hjZEMcrAH2Px98PvGHji48QaE9nceEp4LfUNf8B+I9BvJrTSNTl1CO1h 1bQ/Glk1yY7bXftTRSRSrtG6CR1ychvzv8PW7654U8R+Foyses6Lejxrp9vteO+uodJspbTxBp9t MoI+2rYmK5SPAJGmSYJOAPrP4MfGHWviF4dXwr4i1G11LxJ4XttUews9at45LfxXpcWlXMtjaSXc ixrBrEFxHEN077JoLTzGw8ZkP9ueF/G+Q8TYWjwjxPgamCp8SYag8LTwdSNPD4zEYOEsHi6GKnWV bFxzOUVRxUcTDEPE1nhsDaDq2jjfrctxtDERWFxEHD28Y8qg7RlKC5JKTd5Ko1aXMpOT5YaX+M1P wl4n1TTNJNy3i7UfGWgCz0PxvpEN3fX+m63BpMbWlrruk3FlEYku3mtEEpLNLjT/AJ2ikuWjbzfU rjWPDt7Fd62NatPFlhpGmz32m6lqz3mgW+qSQLBLqOvT6Tqc9yIbi3LSSQLbrEGlUPKFcJX0lqOp SeKbSTVfDXiXWtF8b+GlMPibwZrd5Bpt7rtkz3FnDfWnkNDDHczrcWL217vS3lxA04Dsc+batdfF PwF4b8aX8/iVvGOraf8A2DdbvEOpWemXXhwyO0qbbC3uZLmEeTJaCRJLhLa6aIqkUiMoH2Wf8MZf QSzDCTzCeGpUZ13mFKnQxtBrDYerOFWvQjXp4r+0eahUp16cWo08TDFVa1Cn7enVOnEYemv3kHUc Yx5udKM1aMW05Lm5vae61JdJczkldMg+CeleN9R1fWo7rT4bvwfeaTeW2q6u8i/2fpupq9pqemaT ZXtltt5447W3kiF7aCWVbmYPMY5uDh+K0mTxKut+K9Sv9QS81OCLRfDNlrGq+I9EhXTooLPTZblL O5hm0HVd8UKvOkjiQznz7dVkG7y/TvH/AI2v73T/ABJonjCfRdXl1O1i1jStO8c6FceHrmxvLmKe dovD2p3ka2e6RLlRDGm1OA0gzmsX4n6xqFsbK+0LxBqciLdW9/NpusWmnOkV6lzcPJcWy3Clol+2 QONkvneckSMkzJHx8Ri+L8mw3BFKhh8Nj8yWTV3iFUxLounXhUknSdOjJ0alSFBOv7ahOUlGtXlJ uvTqKEOGWLpRwaSjOoqMua8uW0r2tZe62opyunf3m3qmkdV498Q3ngXUk1Dw3pEPhnPkXek3EtpB qK+H31F5fNvtNtBGlvo8s09sSwczy/uln8yOR2Q8nok3iz9oWSz8HPeSXXjO1u5Z4rwWSWnhweGC qG8+1Jp0Kw6bNDdt5od4P3rMEjdZWIfkPBl98QPHXiXT/D3hVf7Z1vxBLKbvz49lrbRs0p1CTVY1 BibREjk8x/tKypgDYobah+wNZisfgnoc3w88GXXh7w34n8SwGTxt8T9Xu7Tw5Y2kzQuDb6DZyF5t odnW0ghiaODmZyJGBHz+QYavxvLNeIMbjsZl/hjQm6eNwijyQxdeoozoYPAqlOnhXjG1TcsVKnTo 5fQUamIqypqFGWFGMsa61ec508ui7ThbSTdnGELNQ59ryslTjrJ2tE4f4hfEvw/8BfDdv8GfhfO+ rapGhHjvxWbqaG7a4mH+lafp13aybrC8AZwgiYLZK2ArTvIR8/NoGvfFg6fc6E2kXTWUN0viHW9S jttGn0m3soEmOreNNe+zpA0DQMEW4d5JZ57dyBvk8scvcHwB4cmmd7m7+JOs+a7tIftmi+ExMxLN LPLI/wDaGunzMsSPsaPnlnBrE1rx14l161GnXF8tjoibUh8OaPEukeH4UR1kRV0mxCxzuHVG8yYS yllDM5PNfn/FfG8M5xVSjxDUhDIMHThh8BkOV1ozo4HDUJRdKi8cufDqUlG9bERjjq1Sc6spRoyk mvPxONVaTjXaVCCUYUKTXLTjG1o8693prL95Jtu/Kzs/+FbeFv8Aosvw9/79+Jf/AJS0V49kf7H5 H/Civz/+3sg/6IjB/wDhVmf/AM2nD7aj/wBAcP8AwKr5f9PPL8T6Emu4p7xWgSW3tkkVLWCN/Oni iVsxjzAq+bcljuZgF3OxIVeAPrzwd4ks/iXe+EPAfxNuLuLxHpOsWM/g7xRbl/tF2bcRTS+Gtbub UgPf/ZljImUjErAOdwZn+XfGOkzeD9Zhn02Dy9JvoGutA1iG7GqWGpWVyhVZ7G+VNi3UQd45FDNJ DNET8p2mu0/ZwY3fxp8BxO7OsOoX1yodmKq8WlX0u5VPAYyIv1wM10+GOIzThzxEy3hHGUViaXFO a5fl2Y4OtB/UcTh6uMoRjKdG1NzlB1Pb4KtTVJ0JRhUoynCo0u/L51KGOp4WS5liakKdSLXuSi5x tdaXtfmg1bl0a0Z+wpZugJAzkAdB/kVr+H2P9uaSSSf9Pts5Of8Alqo71jc9v54/pUllqthp2ueH 4bu7gtp9R1aC00+GWVUlvbpFe6eC2TOZZBbQTO2PurGSeK/3EwVSlhsbga1eUaVOFeiryairyqwU Vd6XlJxjFbuTUVdtI/XoOCnTbaWq773Vt++xveK2YeI9XGSMXshABP8AskH3Nfjr+0l4dj8LfFvx FHBGIrTXPs/iK1UAhB/acZa8CgdP+JjHdn23V+x3jJAnibVV6Fplk/77jRsj8/1r4D/as+F2qeMd S8P6/oF5pR1Wz0m4099Eu763stQ1WGO8NxG+m+fIouZka4dfL7mVQDkgH+Z/pr8BY3jLgHOpZXl8 sxzjhvOFi6MKaUq0oSq1cNXhTjfmm3CtGfs4pym6UVGMpJI+f4twcsVg6vsqbqVsPV5klu024y/B 3stXZaXPhKPWxdWS6drDz3MNtA6aVdDM11pjKGeO1i81xu015MhosgIX8yLB3K+H5+AOe3vxnrnB q1qHhrxRpMbTan4d1yxhVnVprnTb1IUZGZXV5vJ2oQyOMEg/Ke3Nc/8AaM87s8nOCevfp0r/AB0z HC5lTnRo5phalDEUYqKdanKFVwVlBS50pSjBLlg3dxjaF3CMYx/LZ86aVRNSS6qzt0vfXTpfZabW NYzD2/U/57U0ze5HfHHvge/esoz+h/8AQs0eeCBnr+NecsPbpcg0TNjr3znk9/8AI/Kmmbqcg5z0 6/h6VoaN4Z8ReIg8mjaTc3cEW7zbw+XaafGQDkS6heyRwIwA+6ZM57Vat/C9xcXUViusaJJfTv5c dhp9zc61elwcECHR7KdTg9TvwAMk4Ga9nD8N5ziaWHr08tqqhinalUnF06dV3S5adSpywm7tK0JN 6q+6NI0aslGSg+WWz2T9G7J/I++f2Kb4zeEvGtiSSbbxFYXIBxgC60zyzjnPW1/SvtSviz9kPRbb w8nj3Tx4i0zWrzzNAnv7XS0uni0qTytTRbe5u5YxHNeHDB0iLiPZhm3EqPtDzE/vD/P1r/aL6NOH xWH8EeBMLjoqGKwdLF0pxjOnUUXTzDFxUXKlKcOaMUoyjzc0JJwmoyjKK/V+HpTjk+DjOPvQUk9U 9qkrK6bV7aNX0ej1TR8H/treKJ4YfBnhG2unjiuV1LXdSt45GRZ1ieGy09bhVI3oJBeMobI3LuAy AR+f/nZ789evtxXvP7U/ikeIPjH4ghikD2/h23sfDsO1soHtIDcXuP8Aa+23dwp94/avm8ze5655 wK/y7+kTxA+K/GbjvMI1XWw2DxjwNH3m4qngIQwj5OijOpRqVdNG6jet7v8AOs9xP1rNsbUveMZc i9IJQ08m03879TX8/nr19wf0rpNIeOxCalNc2kF2ZfJ02OdpWaCTpJqjQ26lysJwIhxukOeVQg8L 5/Xk8AnoP6Vt6JbW93r2laZqdw9jbXmo2Vpd3XlNO1rBNPGJJI4o8mRgr52rk/NgDPFfkuVUZrG4 d0qUalec4QpucuSnGrOSjCU5NpR5W7puUVFpTbtFp+bTvzxsrybSWtkm3pr+Turb9D60+D/wJ8bf GrxJb6Z4bcWHhbwzpEcWoeL76Hbawanqtm9xOUMMSNqGpLPeSCOEFjEtuA8gGWP6zfA/9nvSfgdp zWGieMfF2sLcMsl9aaldwf2NNcbAjy22lCFhZkgDBSTd8oJJ5z8++HP2vv2ZPg1pVt8NdAj8VfYv Co/s+8urXw6FW51CN1ivr24M92klxdPcBmclc/wj5VFfWHwx+Nvwy+MFk134C8UWerSxKGudLl3W WsWo7tNptziQxjoXQOgPG6v90Por+GX0b+DMfgY5bx7k/G/jXTVSVeeHzVSnhJuMadXA5Xho1oKr h8NTpxw863JWq1lSlUm6dOSpQ/YeHcvyHCVKfssbSxmb2bbjUu46JOFOKeqiko3tJu13ZOy9WzjG fUf/AKqU8EfRe+OwzzSUrdeueAPy4/pX+gx9xd2bTvqeNfF34CfDf40aY9t4u0WEaokTRWHiWwRL bXLB9uI2S6Uf6VAMLmKXchGQNp5r8evjL+zl44+C9xqeg6laJrngzxDdJdeFvF1okht7XWrQSmys NQ3P/wAS27ubV57Z0f5ZXlhdXYRDH72dgOxAJHHHYn/Pv0rJ1vRNJ8RaXe6Jrun2mq6TqMLQXthe RLNbzxt/eU/dcMAyMpDIwDIQwBH8seP30TvD3xtoYjOKeDpcL+IKpzjTzbD0oReKjOm4Sw+Z04r/ AGqjUhJwVdr63h3y1KNRqn7Kfzud8NYHN4yqqCw+OtZVYr4r6ONRL4k11+KO6eln/LSbl433oWhk STKlWZHikVjgIc7kZT75GPau38Oa3Y6ilz4e1d7eyg117aO51GSMeUbm2leSx1FsOv2PU4TLOomU hJ4riSGdSzLKv2d+0r+yvYeB/HE+sad8S/BHhfwv4pE8+m6d40vr231CxZ5FN5ZRyWthN9osUnYm KR8MRIUO4hs/MEnwP0XqPjz8F2JYcDXNaXjuSToY49q/xFzzwM8TvDXi/N+H8wyrDV8Tk9epQr06 mPy6lTxNCUeVVIRnjY1VSxeHneMuWE/Y1OWUUpSgfj9fJ8wwGKqUJ0oylRbUk500pR7q807Ti9Ho 7PzaOk1XS/GOi6deQ6jp9xqNvZm01fX/AA9czpJI2liP7LN4v8I3DALbadMz2tzFLa7JrO5JEoaL g7mi+IItHntJPGGp3c/hnX9FXTLrxFaeU97qokM+oaY/ibRbm3ZIdYtBeW2WYSS7beSR1vIJEdOh 8DfDtm0mPQoviv8AB7X9b0aa41DwVdr4rnmniLiFL7wvKt7bwNBoVxErybUZ0WdiDC6yurdbN8Df iFf6dqupeFZ/AOtS6zDpmsQaBZeKPD832uVyLK8sG23UUHiPQmtRdiBriKKUeV8rNIS5/Z8l4B4w lDC5zkGS4/HTVLnWGjOnmjh7KM5VqFWOElD6wqjaoOhRcJyjiI18NLD0sVi8KvUpYLFNQq0aM5tK /KmqtrXck+W3NfaytfmUo8qnKJ806gNS8MeJVMdlqmj6PdQlbaaC4h17SLqyaJDbLeQyvJpmo6fO 9w0yokkOVuWACOQDm/ZtK17QJtb0SGL+2bSGb/hKPD+pTz2OnasovlsrbU9Gsb+KXfMy3FrFIsNy s1vOEZRtckew6v8ABn4o3WlyaTa/DXxB4etryKJmsND1v+3fDUd9aNEGVY7CW5kjtXm82URTvJGv mA20sJDxy+Q+MdI8RaDrGmWfifwh4v8AB88FvHa60ms6JfzLNHNaf2XcbdStoo11C2lt0WVS0Alj acqsjjp8DnfCed5CsZPM8gxmGyfENqH1vBYnDRoVsRKN5YeriMHhaVB0VCM7VMLRlisPVq0nTUac nDhrYerRUnUoSVJ7c0JRUXK1+VyhFRta+sIuUW1aybPMdX0mwuMz+HLO9jijt0fVbTU72FrrR7kT NDcFpCkaz6WJFCpKQrL5ypKA+C/GTK1nK8M/mRTwsDvikSRMcNG0UsJOMnDK6MeBx1zXRTeKdV0+ W60t7xbW3t57mxurSILNFIjGe2nk2zw7pAVIxtZdrJ5gjDHIwVvrUTXAv4FuTDJCYtRtpC0UcSzA LHLaPlLqzKycqAsikABuor8VxuGy6vWhUw0vq2Jbaqp04U6MZRTdqcKblKHM01d8kIyUtKdNqMPF mqTfuvlez0SV12Sva/yV10W3pHhzxNdWnxA8GX15M1gbu60+01O5gumksru01s/Ybq/VgT9nL6ff TGRQcxzq77RllHS2V7f+BtQ8Q6RqWj2et6vo03izRrXVru2tL62F4unajHMLuaGLfM50yHyliMpj C3Uz/eXI8X8L20t34u0bTYIbW+87W7EKN5FmYBcCZ33eYAkYt/MY7jlQrKSCGr1STx9ba78VRO12 llFZ+MNW+wids2GuJe3VzpenC+ihi8uC5itrhAZX3RSxl92HOX/TeE8ffAUa2JzCeBxrzaNPDyko zi/bU6MMY5KcY0nVpKjha0JrlnzpqMlVqQUu/DVfcTlUcJuqlHqteVT30vHlhK+/ndo+hvhx8UV1 Txl4cthLFdzyaDb+GtN+y2q2t5De6DpOnGXQhffZGLWk5ikBt5A1tJGsNzG8M4lRtiaDwD8StNOo 6fr0/hbx7I1rp2o3cFnqHhnU9Au1vZpLCDXrW0vH/s+wluLXMk8Ylso7mJQY4zKqH5gg8XweHdQ8 UyWNkdM1rw7q0OpvBbCGyii1Oynt7Vr+0sREBK8Krf2t1AVaCSOUTpsJIr6Wi1XwJ4kup/EWmJq1 jNqHiKSF7XSY4dQ+16DrNk32XUdA/tC5WaSze4mkkeG2CmzvBLbz20q/Mf6H4S4mlnuXV8mzXG4L OJUa9adXD4lVqcpU637n2uFqurFwxOFqYSr7STcnChiFCjZ03Uj7uFxLrU3RqzhVak24y5ldSsrx d1aUXB3eukly7XPEfEXgW303Wdninxf4LmnmmsdQsrzWdLkuLDVzPPdwulx4t8OWOy0lZ0Lh5/I8 0lWkihcc89pPw81PXvGEnw1tNIn1XUJrgXcN3aLdPbLpeoRRTyX9pLcytb6XocaMo+2GSWQyoVAY SGOvWfEHwZvfGVzBd/CrWI9Vt9QtdOeZ9VnW1ttOtW1Gey8Q2uraadPSKGGPULaa5mgfaIWWWKGI bo0P0hdeMvhh8NvhxqGl+Arzw/aa75F1okb6dIFMuvR2a3V28cUssktrZMxubi3hcJG/lN5SMR83 Bl3hjl+a4/NMZxFTo8McNZW/rKxUsS8ZVzfDv2jqYXBVa05UsRUny0mq9NQWHU6F6FadeZFLLadS pVniEsNhqfvczlzyqxd7xhKTtJvT3lblvH3W5M+fPFOueG/2Z/CWoeA/hrNba98SdTs1k8Z+NFe3 M+l25dFSKC2Zi0MCPMBFbrnBIuJ8kgV8JXl7eald3F/qN1c319dSPNc3l3K9xc3EshLPJLNIxZ2L Zzk/0o1hr86pftqsk8upPdTS3k11J5txLPIxd5ZZc/vCwbO4cENkcYrPBx9f5da/mjj3jTEcWYrD YLC4FcP8NZFGVDL8qpSfsMHSUndtNKVTE1HeeKxFVzrVqrlKUrcsY/O47GSxUoQjT9hhqGlOkvhg r+msnvKTu3K7v0JwxPc9Mde3oOelFQ7uMe47DH+c4/Knbh23fkOPw/D9K/PnB/18jhJKKZvHof0/ xoqeWXYD6K8P/EfU9C8N6r4TkstN1nRNVuorw2mrQNcLZXA2pdy2BGDayz26qrPGyujxrKjBwc+w fs/XXg2X4veBbnRk8V2Oq/b7gPpk8Wn6ppYElheR3BGpRSQzQWSQuzb5IXYbQrE/er5s8R6n4XuJ rJPC+l3unWttZRxXlxf3z3dzqV+T5lxdeUQFsrcOzJFGu4+XGpcly1dX8NvEt54UbxF4ssGVLrRb TQtsu3dKkd14o0g3McL9YjLaW88THvHKy9GNfbcF59icq404U/tXF0c9yvhCvRxFOpGm6ro0Mvm8 xnDCVZwoV04uFSMVJujzWtGpSjC/o4Su6WLw3tJqrSwslJO1+WMH7RqL92WlnbXl8mkj9zxM+ex7 Yxxn169a8n0Q2Xjbx/pfjaKWG+0rweNUsfDksdzErw6nLcSaXq18sVtcSLqGm3MELCCVhHJC9lIm PmIrkfjl8WdL8I/CaTX7LVksb7xrp0Vj4Vu4oZLtw+sWQuXvoooWDYh06R2D9EkePPWue/ZI8Inw 58KbXV5Lh7q48XX0+txu8c8Rh09SbWxgRLjlVJiuJiR8rNdbgTnJ/wBZMz4tw2eeJ/Dfh9gcLTzX CYHB/wBvY+sq1Nxw0qFbDyym9K0nUc67jXipKHK3hsTTlzU01+mTxUa2Y4fAwiqsIQ9tUd17vLKL p6a3u7S8vdkndH278QMp4gadcYvLKzuAcdd0IU89+Vr8t/2xPHb2Pjfwv4fSKz1C0sfD732qaXeR 74Wl1G+k+zSRzRMs1hfLBabo54JI5E8wclcg/pf8T/EOj6D4U0bxrr99DpukWWhsNSv7htkUX2Jx Eqk9WkaR1RFGSzOABk1+Bfxa8Xa14v8AiD4k8R65A1pc6pe+daWpdZYoNIRBDpMdrOjFLi2FjHDt lQlJCWdTzX539O7jaGQ8NVOHcvrtZrxfjcNimo2fs8EksY51VZxUa9ZU6UIVFy14xxMUpKnUS4eN MYqFB0IStUxU4y06Qsp6+UnZJPSSUt7M9x0z4oax4mijitPE/iOO+ht4obZLS7WLxbpUdumFjjhj Mdr8QtIwMvHKi6kq5ZRJhi3M6z4kurpLOHxt4N0HxpYXc7W1h4u8JW3/AAj/AIgnuHKhoHutLtVj fVUwN1pf2RmDfKRjDV83LeMrK6uUdGV0dSUdHQ5V0YMCrA8gjkYzX6HfskXuma7PqGqX895rni2C BUvr5dD2Wel2Cu8dhDrWtTybdX1iZot8DxxG5iij2vOV3Afwx4c4rOvFjiDL+Dsdncsvx2OvzVq/ s8ZhasIWlL2mX4uUqeJrJK8IRjKrFXnCthsJhvZL43ATrZnXp4Odf2c5/alacWlq7056SemitddH GEbHmEP7LnjjxFY2et+EYbq10+/dwmmePI4/DevWChVYNKkZljvrY7vlkjEbt3hXnHX6T+yH4402 GW81C88G6hqqlVsdLur7UzpEOVJa71F4bANeurYEduu2NjlpXZR5bfohP1VdxLKoBz9wtyWAbP3s kZz61zPinxjoHgnRrvXvFeo2um6VZRGR5LqULPO4UsltYxZ33V05G1I0DEkjgDJr+yIfRQ8Gckp1 s2zVYmCwdLnrVquLjRwdJxh+8xCpTjKNKKd6ijUqVKdPaMVFRS+s/wBWcpop1arlaC95ufLBaayt 076tpH5QeMdKl0PWb7SfiR4rN9f6LcyWY8MeFyt0IRHnYkcjwxWOg2zIUZVWOWYKw3QBq4e+8Yzi 2l0zQLODwzpEyGO4t9Okkk1DUIzjI1bWpT598pPWJTFbjPEIrv8AxtYWfxf8Ua/4z+H2spqeqa3e y3914F1dYNI8V2o2qgj0hTcG28R26xRpgW8ouecNATyfBbyO7sLmayv7W5sby2cxXFreQSW11byL nMcsE6ho2HPBA6V/njxnRzDKc0zKpk9KUOHsbXxEMJmUKjxVTG4ZTap+0zFTqP2kqDh9YwtKdBQb 5K+HjNWPg8VzUqtV0v4E5SUKl+ZzitFepd6uNuaKattKKZ+i/wCwzua1+I0mPkM/h2MHtuCaoxHH sQfxr7o1rVrXQNH1XXL5xHZ6Pp17qdy56CGxtpLl/wASI8D3NfFf7C9qV8GeN9RK/wDH34nsrVTn gpZaWsjY45w15XfftgeNR4V+EV5pUMwjv/Gd/b6DCobDmwjIvtWcDPKfZ4I4m/6+wK/0p8Hs7h4f /RXyjibE2j/Y2WZljIRlop1Z43GVMNT161as6VOPdzR+gZVXjguG6WIl/wAuqdSWvVuc3FfNtL5n 5Ya1rlzrusatrd25e71fUb7U7hiQSZb25kuH5PQAyED6VjGbBPcfh+eazjP/AJ+nXvUDzEE89c+n AFf5MVfbYqvXxNebq18RKU5yfxSnJuUpN9W222+7Z+ZNuUnKTvJ3bfds2kuDGUlRhvR1ZQVDYK/M GIIwRuA4Oc/Trci1S7S7N2sri7d5ZVnVtkkck5YyTxYwI5iWJUjoeQOlcz5/+HA/lk+lOF03zHqW GCSAx6g5BJ4Pv71VONSm4uMpQ5WpKzfxLaX+JdH01sNNrZtHbavqVjP5jwee93eG2NxLIwMcKWsK wvEOD9qkkljWUy5BG4oVLAsYfD/irXvCmrWmu+GtX1DQ9YsJBNaahptzLa3MLoQflkicZXIGVOVI 4YEVyktyjRWwU/OkbpINpGD5sjLyWwcow6elQCYngAknpwM/hg12TxOMhj6WYYarLB4yhKFSnUoO VOdOomqiqQnBqUaim3LmTUoy+G1klTnNTVSMuWas01o097prZ3/E/Yb4H/8ABQueHSrSw+Nlkt8s bGBvFug2+y8ghiiJSXXNMO2OeaQiMIbYh33FihNfpH4G+Kvw7+JVil/4H8YaH4ghYEtBZ3sa38BA Tetzp0xWeB1LIDuQDLDBORn+W1dVUaJcaezlW+3W08EaoPmQwzi7kkkBG750s9oYNjadu3nPcfDb WrrTdZt1068u4b+6tr+SL7PM8YjItp4r+OZYcSSJJpRkZAjhlntImXtX+hngz9PbxP4WnkvDXGeG o+IuUOFKmsRiasqGa05c/s+R4uKqxxL0Tj9ZoVK9RyTlWhHb7rKON8xwzpYfGRWPpNJc0m41U72+ JJ83/b0W33sf1NbW9CPwNcD8Qvid4L+GOjT6z4w1uz09IoZJLXTzNE2q6nIiki306w3+ZcSMwAyB tUsNzAV+AKfGr4w+DfEV74auvih42m07TNT0wLfWmvaolrqFle39reQyWdncyOz21xpbh4F3qwiG GIy9eVfFXxjqviXxhc67dahfTarazXVhqMd3eXGox2lzYXVzp8SwPfD545bKKF2Ug5Z3BA28f0Bx f+0Uy/CcOZhPhvw8r4bijD1fq0qWYYylKjh5qVSFWoo4em3inRnDSkqlBVVzSVTkp1EvdxXHtOGH m6GBaxMXytTmrJ7N2ivfs1tdX1d7JnvvxX/aEu/i94z8S33jiK5tdJttVS20XwzKkUcOk6BGs8Cr JP5O+/Vp0s5LqKRG4kkuLcxyIK+W9W06wZxLobTs4gnuNQ0mfa82mGKVg/2O7Riuq2PlGNldP3gV sOvyljY1HWbO90C5kuE+0XmoT2PlyCaeW50oWNs6SfaJBCovYbq5kmWMSSM9uiADduyeJttTuba7 trmKYw3NtdR3MU+4I0U6sp8wDGF4RQcgg45GMiv8t+OOLMz4xzavmfFGOXEGY5rUqYmrjZJ/W+av WlOzndR92moKlRX+z06MvYqnSqU4qh+bY3F1MXUlUxM/b1arcnN/F70r+S0VrL4UtEote7q6Vqx0 u9tb+OSeOezvLe4h+zOsM26B/NU+aVO1fMWM9DnB5HFfVGj+NLXx5oGoatBZWui+MvDM+m3M+k21 +1jp2paXaQXCb/DlnsaNr5ZoJp5rKXctxI26ArgrXxrdXW+ZphIWeUtLLkbNsruxkUDoRk5yMD58 ADFbPhvxNeeH7pru0TzJornTLuMmWSJEOnXv20oxRgMSKHQ5PPmFRndiubgfiivw3i6uDqz9pkmO U/bQ5IykpqlNUcRSfLOUK9KTUoOL5XrCopRbtGCxUsPOUG70Z3urdUnyyXVNbr7metah458UQ3Gv eHLi7vtDlltzqeh3Fqb3SL2ym05ri/srdTDdAyWstlJexruaTY0yhXcIK9S+G37W/jzShbeF9e8T +INQ8PTWVopm1HVDqF1pVzpkbyyvZTX1rN/od1DAguIXV13tmJo8sa+ePGN7qesanL42tIZbvSLk JuSFlkk8NOJfOm02eKF99vbK73P2eRwsbRzMq4MZVfN2mgghvHhumS4+0wpapF8xms545pJ3klIz G0e22XAwWMzA/dxX1uF4+404Oz943h/iPF4SnRlUUZe1nTji8C5TqU4ThzRhVpzjKqov4kpU4xca lKmqfRHH4zCV+ehiJRSur3aUoatJ62aevnqlo0kvrrxJ+0qLi6uLLxR8LfhX48jLhpb7V/DR0vWl V8F1e80qK1LhkdXSVWcMsoYMcjHL3fi/9l/xDN/p3w38deCnEMMkmo+C/EkOoWtvLIqmYLoHiQSm WBJOMpdruHQAGvC7rXX8SaTYaFcNZG/0KK/n0/VJspfatFcst3Lpd1dMP3zxlJTbK3cmJTnYD580 5ODk5I56+uMe3FaZr4m8S4vEOrmP9n8V4PE8klLMcqwOJrQajerR+tVKMsZF05z5JVI4pTnGMakJ QjJIVXMsRKTlU9nioStZ1KUJNaXceZx59H15ruyadmj7S8GfDP4S614p07WPAPxj8O37W97b3aeF /Hmm6n4D1SMGdI0tYNRL3VhK7PMsYaScDLhgCRtPnXxG+BHxd8Ja/qXiK98C6lc+HpdZuNTttd8N yL4l0M2U9697byjVdGeZVT7OyEM+xiMNjNfPtrdOsM8EaxLLK8c4nY/vUS1iuS8SOTgK/mAkEElo k2kEc+1+GvE/xI0+z0LXfhn4l8X2Ouuw0m60/wAPXN7LPdXv2hhBFHZWHElt5EseUmjZFDxgMQ+B 34TOOC+JMr/szGcF1skxeGqvFqpkeJlKLnJwpTf1HM/rdXESS9nJUaWY4aDV1DlSsrhWweJpeynh HRnF896Mm1dtJ+5U5nJpWdlUiu2xHrEGr+JtR8WeMJENpqM0Da/c22oeWLi+s5zbxX0jL5QjurT+ 0oJIljURspYK27ccev8AwV8L+LPHltb2OkQ6RN4e8PX9jeTatqbXcGn+EbVb2bV7iLasEZvfEFtd RMFXzGWWG5InQJEjL7jda/YaR4Yj1P8Aax0PwL4lu7nR47Wx0/RbBPDvxHk+0nzr611zX/D7xwbR cF1MBhubhmQuTDnIwNU+JngT4l22i6N8GPiVpvwah0eVTZfDnx3oy6Ro2pugKpZnxXprzWtzbTK7 rMl3HA03mHz5m4x+w5bwLkGR51TzfM+K/reOxtKVWpkdWpQy7P8AGzr1ueSxFHF1/qOFUpOM3QpY 7FYzEKEPY0KdSUZw9angqFGsqtTFc05rmdFuNOvNykn70Zv2ce/KpynKytFOzOp8UftH+BvDN4fB fg+Sxuf7dW603U/HjiKWCPUJ2uUe48hGZ5LFb2U7SWMcPnfIWCMw/PnVidLudU0PVJ7m31N9Zzq0 Kw297YwvAiyW2qW90ZPMluDLNJuT51MMx+Zsitn4jfCn4i/D0eZ4n8H3Wm6Vc3Ml5put6Z5eq+Gb hbjHmJpuu6c8tvcWRKI0SiXcgyDk5I8qa5nu5Q0ha5mkWOJWYs8jMqpFFkjmRgiIo65AAr8g8UeP uL+Isxhl3F2USyfGZROccLhJUKuEjhcPiIRVWj7CcYVZ+0cIyjWm3UqRnU9rKpen7Pycyx+Lr1FT xdJ0p0X7sOVxUYySurNJ6taN6u7vfS16/v7y8ljN7cG6e2hSzjlKrua3txsgG8IGlUIRtLZbHB9B ViWSWRY4o5JpHwEiiRpJXIzkKiKSx/WtfTtNspJ7m11G6ityhEbX8dwjWtgYir3LzRqC10xUiOFV wJZTsVhy6sutVisUNloRngjV5RcaozGHUdSDYVATE3+h2OxQVgVicuTK7nAX8mngpSX1vG4jljNt Nc3PWlKLty8snfbX2knyJac0p+4/McHbnqS3+cm1pa367fPQ6Xw5oN3FJqV5qukwxwW+iai9omty RWUU2oSxrDYrFbXUqPeSmWQBFQFgzBhgqDWbrOgf2ZJZXOZE0zUESeMho7q4hhVnjvPLlhbyb0Rv FNsZZBvXYXVCxA5mG6kMd3mVROyxSieaYLMBbyq4jgkdtxlLMpwDuxHnoDXb+GNC8XyJC2jwpE+r K5C393ptrDJaxo8sjzWOrXSrc2rxI8jyNE6rHDuBwTXrYShh8xo0MvwmU18RON589Ne2qqUqij8F OnTlNTSjBQc1ytqXPpZXBRqKNONKUut17zvddEle+i1elzqNn7Pn/QV+Lv8A4KvCH/yfRUP2SD/o NfBj/wAB5v8A5W0V9hyR/wChDk//AITvy/6j/wCvy6/+4VH/AMBfl/f/AK+Rwf2jpg59QcD+ldto mr3Nr4L8c2SCA22py+FoblnhieYGDULu7hEUzDdEuYXyFOGxznAry4XIHRuB7n/D3rrdPmf/AIQv xNJkeWut+Fo2+8CGaHxA6Y454Rs59K/MMkpVqWMrzpOVOTwmPi3HflngcRCa9JQlJS7xbOCi2pu1 0+Sf3OEkzu08SeLvinP8NPh5PctdR6K0PhPw3CoYtHFq2qBmnnyx8ySOKSJA2OIbJF7HP7e2cWj+ CvDFtatNDp2heFdDige4kYR29ppmj2So88jfwoIYGZvU+pNfkX+xh4eTxF8arHUJo/MtvCejanrr FiSqXbImmWBzj7wmv2Ye8We1fWn7b/xFbw18PtL8G2Fw0N744v5BfbHw40DSDFPdRnHISa+kskPZ kikXnOK/u76PGYPgPwk8R/GniGU8yzGt7LB4d15ylOrRy2hSwuCw6qO7VOria9PDO1+WGHho+RI+ 2yGs8DlWPzivepN2hG+rapxUYRT7OTUfLlXY6fxb8fIfiz+zn4u8W6Zokd7oHw0+JlrpWueF75i6 +I/h54jtTaCe/HJsr9rzM0EiYNtKkeCSrZ/Pf4naDdaLovh6+8P358Q/CzWZrzUfBWsTQRSajozz lRqXhPWLpU32V7bz43W7N5cjL58Kje+fWv2KNUtfEutfE/4IalKosvjF8Ota0nTUkYCNfE+iwSap okig9Zi8UoXuSR3rl/h745X4V6XP8KPFN3c6UnxCuLi61bWVZWufh5dZk0vw5qtrayoyid7i3Nxf hgHWzeHYQ2TXw3Gec1vF3hjgbirjDNfqb4hy7GZVicyjCMVhM6ynHx9jhZ01KlTlgcwy/GZOpUJ1 IU8PWp/2hGdOFDF+24cZXeaYbBYrFVORV6c6Uqn8lalNWi0rLkqQnSvFtKLXtLpRnf5lM5X72V+o A+nUD3r7f/Zw+Meg+AvBVn4ZsLL+2/HHjD4irZw6dG7RxWmmPb6RbDWdTnjRmWyhV7ooijLtG+Si K7D5Z8UeLfij4O1/WPDOu+JNWTUdNu2tbpJZYbmC5QDfb3du88LLNZzQMksLjh45gRwa7H4W/ETx RDL4z8S3F9p5Twn4F1y+huJdB8Phn1PVBB4f0q1luYtOWV1kutV+4H+fyiGym4V+O+GWPXAnHVPE Zdj8XgM3oxxGFryr5ZQ58JSjrjZxjPMJRjWpYelWV5wlGDcm4SseTl1f6jjVKnOdOquaMnKnG8Er Obt7TRpKS1Tt2PYfG37Y/wASV8Ua3aeFrvw8nh2y1q+g06caMJLjU9Nt7qSKCS5mnunMfmxJu3Rh GAYMCDXmer+KJPirayS61rmr61Lame8hbVJ2v/Efg9pSGuWihhVV8TeDy4zIYIheWajeY9gbzPG7 nx7Z6k8bat4K8HTGOKKEvpNheeG5nWJWAdjo2oRxNKd2WYxHJAzX1F8Mv2cD8RPhvqPxL0dvEngv V4Z5LnwfZW13HrJ1SHS95vLq0EkNrOjSSrJFbfvyXeA/MVYZ+ly/NPEvxbznNMpo55X49wtanicZ PLatTFUo0cPTtObpwrL6rBRbp06VOWIbnUdJUpQxKo16fTSrZjmtarRjWljotSm6bclaKs3a/uK2 iSctXazUrSXy7rOk6r4bvYIr5DE0kUd9puoWkwlsr+1ZswajpWoQnbc25I4dGyrDawVwQO+j+KFv 4ltrXSfijpsvim3tIFs7HxTZyx2njrSIUyIgmpyDy9ftIweLe9ViQMLPGea6po4fF9hN4XXVbPxL BYGbUvM0iBtJMN+0Je+vW0PUIkm8K66kzSrdR4OlX7RNve1uSJW+dtd0+70LVrrSLh45bi2kCK0B P7wSANHuiYh7efDAPFIFkjYFHUEV+b5nleacHyni8kxEq/D2aSVKrSqqliMPVqQ1lQrwTqYXEqnJ TdKtG7VlVpSg3TqT8+rCrhffotvD1bJp2lFta8slrGVns9e6ezf7Q/sseHdL8N/CWwfR9W/tvTtf 1jVtbtNTNjPps09tLLHZQx3VlcEmC6jWyKSBWdNyko7qQa+JP21fHv8AwkHxNt/C1tPvsfBGmJaT KrZU61qnl3t/ntvjt/sMR9DEw9a/Qnwu+n/Cb4J6LJqZWO18FeAba91Bj8pa4tdL+3XSAY4kkvXd R6vIK/JPV/EHgf4vf2hqV5HH4K+K+q6pLctO928fgXxObh2ld7ua6MjeHtadiEBLCzkchmaHJA/t Hx8n/Yng14f+E+XYnC5Rm+YYPCV62DlOpTVWjgqVOVTC0J1HVSnUx04zoRxFZSrfVp041alZqM/r s8k6OU5flcJRo1qkIylC7V1BJuCbvq5tcqlK8uVpNvR+NCc8Z6fhzkUx58kd/wAvy61Hq1hqeg6j daTrNlcabqVlJ5VzZ3UflyxtjKsM8SRspDI6ko6sHRipBrKefkZI79wa/wA76mCrUK1ShXoyo1qM nGcJxcZRlF2lGUZJOMotNNOzT0aufBtOLaas1o09GvJrv5GqZ+Mjt+HBHU/570hnwOTj1Jx/n1rW 8FeDPFXxE1+18M+D9IuNX1a6OfLiAS3tIMhZLzULpzssrJNwLSOQOcAMxCn9Xfgt+yR4K+HKWmt+ LktfG3jJAkvmXcIk8PaPOADs0zT5lIvJlb/l4nUkkZSNK/X/AAs8C+NPFfFt5NhY5fkWHny4jMsT Fxw1N6OVOkl72IrpO/sqSajeLqzpRkpHq5Zk2MzWb9hHkox+KpK/KvJfzS8l5XaTufCPwv8A2a/i n8UVgv7PSR4d8OzFT/wkPiNZrK2ljP3pNPs9hn1HjoUQRn/noBzXj/jHRJfB/ivxH4WmuRdy+HtZ 1HR3u0iMIuTp9zJbm4WJmJiVwgbbk4DYzX9Bqv8AKAcYG0KoOAqrgKoA+6AMDAwBivwQ+PEo/wCF zfE8oflPjXXcAY6C8kz9eRX6v4/+AnCnhFwVwtiMpxWIzPPMwx06OKxVeSjGpGOHc+Wlh4fu6NNT jdJurU1tKtJaHp57kmGyrB4WVKcqtepNqcpaX929lFaJXV92+7OFN4TbGLK484SZOPMz5ZQheOU4 Geeqj0q5pWoJaX1jcNtdYZlllGWhbZgpKvnrkhBFuYYHBBwDXKfaOgOABn8c45P51YiukmuY3u5H aIFfNYBS3lxqcIMsOoUL171/KNCE4VqNSLXtKThytpWXLJNXbutHvdNPW66P5iLakn1TX4H0rp11 c+ItMhRtXjeXwxpmkvr6XVhNPM2lWYhlS9tZgC63NqQsauQoMVzGGOMIviut3hudQv7yJ5LpG1G7 33sskkstzunke3muUm+ZJTFwSxO4oSctuznaf4u1jRdcTX9NupLbU455ZU3F5IzBOphls7iOVj9o tXtdsbK2dyAAnIyMi7ukld54lWEXEjO1sJS4jY4kwGY5dMsducsMFTyMn6fO81o5tgMJTUJLG4ec 41XJzl7SnFJYepBznJQlZyjVpqMXzJ1FOXtqkafTWrxq04LXni2nre605Xrez3ut7631aVpryTMm HcB/vAHAI4OMLgFcgcY7D0qGS4BLYLfMql953Hd/ERjsT+PPOayWn+ZseuMjrz1yK3NS0xk0jT/E VhFL/Y91ImlXE0txBI1vr8Ft595ZlEIcRNCY5omZMbJtm9mU187QwFfEQr1acXUWHipzSTbUG0nP RWUYyklJ3VuZdL25lFyUmteVX+Xf5FEz9Md/pn8ff/Gt3UNDutP8M6D4ma+sJLLxDeazYQ2UFyza hbTaG9iLhr62ZAEhf7dbtEwZgec7SOeL88YPQEDkc/h9K9Z1K3lm+BXhjU47y2+zWHxH8TadcWk9 q0d817qOiaPdQPYXuwi509LWwczruXy5rqPKHIavZyTKaWNw+fudJzrYHAvEUrSS5ZQxOFjOTTlF TiqE6ycfeavzpNxNKNNTjXbV3ThzLXqpRT9dG9PmcNp2syWF0JN032adVttQgglw11bMSsi4f5TL tOY9wZVcA7SCQY/EAtYdSmNisa2zYdY4RIBCWADRTQyktaXCvuWSIlgjgqjum01zKzlWD7gpRtwY nIVl+ZSBjk5H+NdJ4V8JeMvHt+2m+EfDuteJb2WQGVdMs5blIpHbIkvLwKIrVdxJJlkUdTnijA4X G5jCllWEwdTMMVWqL2NOlTlVq8zTThThBSk+dtNxitWr73vMOeolRhB1JSfupJuXmkldu/ZGGLjZ IsikgowYFCVdWU5UqwPysCBjvkVoaVpOt+JtSXTtB0rVNd1O7lwlnptnPe3Ukkr5BaO2RvLyx5Y4 UZOSBX0lb/AHwV8PYrfUfj78SdP0S5YpInw88EvFr/i+6Jb5ba7nh3R6eWBCkqr4LcSAivoq5/aF 8H/B/wCGr23hb4ZzfD+/1q1ntPAehXXkReKb6wEM1s3jrxU89sz21sLzP2aOczyXckDn5Y13D9e4 f8HqUHiq/iJxPR4IwOXUfrFbDKP1zMVFW5Y1cNRk4YGdV2pUY46pSr1KsoQpYeo27erQypLmlmGK jgoU1zSjbnqW03jF2g3e0edqTeiizwfQ/wBmRPDWnReJvjt4z0r4baKQrDQYrmDUPFt7ESC0CQRu 0VnMwBTb/pEi5yYwRWhN+0Z4H+G9nd+HfgT4Ej0a3nt5rabxtrjvceI7yUo0cd9+9BkkQNtLRM0U TBdvkgdPj7W/EeueJNQl1bxDrGoa1qM7M0t7qd3LdzkscsEaVv3Ue7OEXaq9ABWSJAeMjrxggkD0 A/OvIfiHhOHYvD+G2QQ4XSTjLMsQ443OayatJ/WpwjRwSmt4YChQlqlKrO1zF5hCh7uXYdYa2ntJ WnWff3muWF+qpxX+JnY+IvEeoeJ9SbVdSu76+vJos3D39yblhcEGS5ktgiILa0acyOkSqFjDbeQM 1z4kHc56HGOh/OqAkA6Zzkg9sZ9x9aeJTjqB14Pb8SK/L8TVr4yvVxOJquviK8nKc5NuUpPeTbu2 3uzzZSlKTlJuUpO7b3bPXvAXxq+JPw3Mlv4X8S3cWk3Py33hzVBFrHhnUYyfmivtB1NJbadGXgny wwzwQea9Zt/GHwA+JsyN4w8NXXwT8Ys26Pxf8P1nv/BE99gmK61TwlLKZ9HAn2uz2EzKuOLcDivk oSH6j8qswDd5jsp8tIpCzFHkTcUYIjFFPlszDCk8A88DmvrMn444gy7DUMpxbpcR5BRfu4DMofWs NTW8nhpSlHEYCT3lVwFfC1XbWbWh10cdXpxjSlbEUI7U6i5orvy6qUPNwlF+Z9E/ET4LfEPwho9r 4h02Sx8eeBoriS+j+IHgm5j1rS3vrthcF9Ue3T7Vo06qExFexxMrlyOWNeDwLJfSSyzvKYoIxPeX GRJJHArpHkb2+aQvJGiA9WcA4GSOq8KfFHxl8PNefXPAPiHVvD8kixxzW6zxzWl7biJI3sdUsGQ2 +qWhClSssRV15Kgnj6FXxt8IPjJo7aL4w021+B3jbUjHd3PjbwppCSfD3xFeNNstF8VaFbo9xoMD TwK3mWTGBZWdzaYGa+gWTcHcXV60sizWfDOaxTcMtzKtGeDxE4rlpwwebTdGFFSaVqWZwoqnSVv7 QxFWSibqlg8W37Cq8NVSdqdSV4Sa0ShWbSSfary2X/LyTPDtP8SNoGnHXNLstE0+VJY9O0iwlsLD Vr+RjbvJPruqTalBKzsvyeUqiNDLMCsYiiw2HLrt5d3Gs39+93d6hJZNHLffallkjivBDFMkU6KR FHLLO5kwNpjZoFCByR0fxR+FXjv4bixk8S2kN9o+q3F1daL4w0KeHVvCniC1eK1SGfS9dscxSjZG B5LbJIQu140ORXn2hxadm/1LV/31pploZ4bAM0f9qahLIlvZWTyoQ0Vt5shlmZfmMVs6KQzhh89m tDiDLsxjw9mdCtk9bBLmlQxClRjTlKk5yxDo8rjFODUoOlHllSjBUudyUnhVVenU+r1IypOGrjLR J2vzctrbaqy2StfQqfbp/wDntP8A9/pf/jlFXP8AhKbj/oFeGv8AwQWlFfPewwn/AENJ/wDgqf8A 8n/XzOb3f+fj+70/vepTu7u3luriSzgNpayTSPbWrTm4a2gZiY4DcMoM2xSF3EAttyea6Ky8VQWv g7XfCzabDLcaxrWhavHqxkYTWkejW+qwvaKm7a6SHUQc442Nk8rjzj7WexHccnH5Un2ojqRz7k/1 4rPD1MTha1avQcadWvTrU5WpwtyV6cqVWKjy8sbwnJJxScLpwcWkKM5RblHRyTT0W0lZrstG9tuh +pH/AAT40tGX4meInXLg+H9DhkIOQp+36hOoPbJW3JHsK8Y/bg8Utq/xrk0dJN1v4V8O6RpiIGyq 3N8j6xdNg/xH7bCp7/uh1r6a/wCCf1qE+E/ie+CjfqHjm5Qtk5ZbLSNMjQHjqDM2PrX52/tF642r fHT4o3hfeF8XalZJuIIEemGPTogOvRLUAfSv6+49Usj+if4YZJQ/dyz/ABrr1bfbp+0x+Ls11tOe Hf8A26ux9bjpOhwrllGOn1ifM/NNznr83EsfBDxHfeGvi98Odd0/Uo9KuNJ8W6RfPqEwlkgtbS2u Vmv5bhYFLNALFLjeAMbc5IXJHvP7dPhS20T43XXjPRJvtvhH4t6JpPxB8L30YAtprHVLOKO4t4do wixXELKEGNqsoIr5R8JMbbRfG3iV5PKbStEi0fTyFB8zU/FNyNKZFfOUddFGtSBuxjHIOM/ZaTf8 L5/YkbYftfjz9mDXdxX5Xu7r4a+JH5x/FJDaXq+4VIe2a/M+CcBHiLwv4w8O50+bNq0JcWZT70nz 1MojUw2Ow0IJuPNXyz+0cS0o885YChG7Til5uCSxOWYzL2v3zTxVLzdJctSKV93T9pLa79mvI8in v7b4vfC20hgsjN8UfhPpp+13CyGS88W/Da3Z0Vo4+Wu9R0dpLfcpy/2Ml1JCsFoWME3hn9nnVtfT VLayuPiR40tvD0dksf2q71jQPC8LX17HvC40mOLVri2dyctOPLVcDOfD/A/jnVfAPizQ/GGjCKS/ 0O9W6jtriSVbW9iKNFcWN55TBpLSa3lljkXOGWQg5r6t/aY0u21n4dfB/wCJPgTQxpXw2vdJ1VZb CA7R4f8AE2v6xcajfWU9uANts1xFPFDN8wItVTIXygfPyaFLiHhriji6P77i3hrKHg69KnGcZ1sP WnhcvhmrlSiuaVDA1sRhsbeSc5Rw1es6qr4m+dGSr4fE4te9isNR5JJJ3cZOFNVbrrGEpRnrraMm 3zSPDfhJ4Evvin8QvDfgqzZ401S9D6pdRqD9g0a0H2jVL0kD5StojhM9ZJEXvX786Tpmm6Dpem6L pFullpmk2Ntp2n2sS4jtrSziWG3jUDHSNBk9Sck5JNfnZ/wT98BCHRPFnxNvYAbjVLseFtCkkByl hYeVd6xPESOkl7JaRkj/AJ82HHNfo3kjrj8z+gxX9r/RN8O6XC/h+uKcTQUc540l7bmatKngaUpQ wtNdlUftMS2nacatK93CJ9lwrglhcD9alH99jNfSC+FbddZabprsflD+2n8Iz4K8VwfE3w1C9roH jSaa21xLTdDHp3iWSJ2uSfLIEdrqFsskhXhTNHOCMOorxT4NW9p8U/iD4F8H+IY55dTTWdPex16C MT3FzpOkONQvNG19SQbyzFhZzLb3RJltziJ/MgKiL9wPGnwQj+LvgDxB4Z8TywaB4d1qyMcet6gF V7K+iIn0/UtPt3Ia4nhuo43UDAcAoSAxr5j/AGXfCv7OXgTxl4yg+G/hfxR468YfDwnw9rnxG8er /Zmn/wBuXct1a32neHvDEJ/cRCGymLySkvsdQCQ+T8zxl9GjEf8AEasizajjsDkHA3G+Jhi8RhcZ OXPiK1CTxOYUMFgaMKleo6lKnLE08Qo0cPh51JReIpqMIz58Zw5L+2aFaM4YfA42SnKM3rJx96pG EEnJ3SclKyjFt+8rI0/2pZtd1PwVp/gDw/4U8VeJJfHl9LZXx8LaVqGo3WkaZp0S3cWoPFZxETQD VTpgeFiBNCkyKd2K/N26/ZC/adtjJn4L+NrmJFDrPaaZ58M0LjcksQDbiGTB2sqyLna6q2Vr6l/a J/bR+KmqfE/xZ8L/AAR49m+H1joM1rpWg6j4cFrpVtfeIILdTquj6veCMtDazXkhgt7lWQW89uFl zDK7x/H9t+0/8fEefw9r3xa8f6VqFnfXZtdXm1/VLfUdJ1VnjjntdYKy7rrSmkh2ujqzWzv50Xyi SOT4LxzzjwU4v48zGtnmO4kzaWVzlluHrYGllWDwtKeElyVsM5YieLqVFUruriKNWpGhG1Wyfs3K dLgzvE5Ni8dUlWniKvsm6cZU1ShBOGjjeTm3eV5JvlWvbVUPFOl+NvDujDw38XfBfjHRLrSLWRfC mt6rot1aahpzJyuh3lxfRoNQ8Pu27YDIZLR/mgzGzxnlPhl8OfE3xb8W2HhLwvArXE/7+/v5VY2G jaajKLnU7+VR8sKAgKo+aV2WNMs3H0T4U/bf/aS0HVo/BfjabS/jBp97eWunXPg3x/pNh4hXVmvW jS2gtdRij8xzOk8Xkyo7q6zK6kqQa/X74b/Bj4c6Voeo6x8NfCOn+BfFuvx2ms+MPCNrdSX8SXot Y/PsdFvZwGbToLhpvLhUBNzswUFhny/DjwA4V8aM/oV+GOLMfisp4acIZrgc1y5YHN/ZRU3Sw+Hx eGr4vBY2bVKVFuVTDYuhRj7mGqRp04xyy7IsLnNdPDYupKlhmlVhVp8lbl1tGMoOUJvTlveM4x2i 0kjzb4TfCbwl8HfDUPh/wzaCS5lWOTW9duET+1NdvVX5p7uVRmO3DFvKgU+XEvABYsx9TEg5yAOv OT+FQskiMyOCjqxVlZSGRgcMpBPBBBphY9lJ/P8Awr/Q7Kcly7IMtwWTZNgKeW5Zl8FTo0KUVCFO EeiXdu7lJ3lOTlKbcm2/0CjThh6cKFGEadOmrKKVkkunT57tu7ZcRkLoMnJYcY9+e/pX88/xT1P+ 0fiX8Qb8MGS78Z+JJVYNkFDq92qHP+6BX76+IdZg0Dw/ruu3LiKDRtG1TVJWc4CpYWM90ST2/wBU APc1/OJd373tzdXsxzLeXNxdSNnJMtzK8zk8f3nNfxF9NrHw+p8AZOpXq1KuPxMl2jCOGpQf/bzq VEn15XbY+M40qpxwFLq3Ul8kopffdlkyg459s5Hr79etR+Z1+Y9D7f5PNZ5lPUEduBTPOIB/xz9c enGa/gFUX93yPgzSM5PLMc+pwSfxPsP8Kct2VjkTCkSbMkgErtYt8p7E/wAuKyTNnPP5nH+Hqaja Yr3B98jrz19atUuys3/wwami04yeeD0OB1Pb/PrXYaF4ssLLw/4i8K6vptrdWHiCbTbu21fc8d94 b1fTHmS21S3KBvtNm1rd3cVzblcyRyhkYSRrnP8Ah94g8IeH/FVjq3jjws/jTw7bw3YufD6Xz2H2 q4kt3S0kknjdS0UcxVim5d2O+MH1a4+PfgzTLlp/A37P/wALtDZHL2914hj1Txhdxn5gjeXqN2sC sAegjI4A7Zr7bhvKcrhhv7WxvGGEyaq5VsPLCTwmMxWJqUalJQqSUIYZ4Vwqwqzpx58VSqKUXKPJ JRmdeHhSS9rPFwou7i4uE5ScWrN2UHCzTa1mmrN6aMw4/gN8Y7y/Wy0jwD4g1uC4cjT9Z0uxlk0L VLUgPBqOn6tNsiksJYWR45GK5VxwG4r6B0H9nPxLp/w38UaN8XfFfhT4b6Va6poninSX1LXINTv9 AvfMbSNVuL3RtNlO2G7064ghVTKC1xBD/d58t1/9rX40eM/Csnhtde0/w2LBXuWm8L2UWgXl/pUY WP8AsuFoJCII7eNtyJB5bPFGwYnYM0P2ebHRtd1P4k+Kfii15qfw20bwPdN46urjULz+0ry4utQs Z/DunadcifzJtXm1ewi8pd+CI3zjNfq3DuA8K4cSYTLeGcDmfEss6w+Jpyq5piKeX5bQhPC1XWeK pYSlXxc8PhVF1a1ZYqjKjCn7eClKEJy9PDwyxYmFLDQq4n28ZK9WSp0opxbfMoRlNxha8nzRcUuZ XsmdG+p/sqfDgJ/ZuneLPjn4jgYFZ9YZvDHgt5wSBiwhAnvLfdjCsJA/r2rqYfF37S3xQ0G1bwXp +lfCj4YXd3cabayaNLpXgLwzaQ28SC4N5rV5LFcXkCI5BkTdvcuqAsCo53RfHXguw0/xP4z+B/wR 0DQ18BadYz3Pjf4o+JJPEV7Zz3s4trMaRo12VsLjxLM3mmOJfNkKxNIiAJXzb4++KPjf4n3tnqPj fXJdZuNPtDZWQ+zWlja21qZ5bnyorKwhihXEk8nzbN20BSxCitsz4iwHDuXwowzJYbCZlTbo4Phb C1MpwmJowrexlLEZ5mFGWa4yClSrU5UpUMTSnKHu4mDUkipiadCCSq8kKi0hhYOjCaUrPmr1I+1m laSa5ZK60mj1KDX/AIf/AAuubvUdDvm+JvxNtLz/AEHxNqFiy+A/D15FJIJtU0y01CQ3Pi3VUkAa 3nukjtVcCVYpcKT5H4l8XeJfGWqS634r1/VPEOrTgiS+1a8lu5wjO8ghjaRsQwh5JCsaBUXd8oFc cJR1GSOmRnA9Dx+H50eZzjJ+uSB9DX43muf47MsPDLqVOOWZPTl7SODw7nGi6j/5fVXOc6mIxDXu +3xFSpVULQjKNOMYLyKmInUiqaSpUVqoRvy3/md23KX96TbtorKyNLzOeTjrn0HHvTxJx0z9DxWY JAO459Pb1z04/GnCT1wfUDqPXjua+ddP1RgaYkOOSR9D/L0p4k4znjpznrgnv9f0rNWTnrg+/I+m aeJMnk547H+lQ6b7JgaYkx1z+HH9fYV9Q/sop4e8S/EO9+FnioW6aN8W/DupeCoLydUJ0rxJOovf CuqRyP8A6p49ctbVSwIJSZl5DYr5RWU+wA7E1r6JrN7oGr6VrmnSPBf6TqFnqdlOrMrJc2NxHcQu jcdJI16cV9Bwhm9HhvijI87xODjj8Fl+JpyxOHmrwxGFk+TFYaf93EYedWjLspu3Q6cHXWGxVCvK CqQpyTlF7ShtOL8pRbXzNjxX4d1Xwb4l1/wprkElrq3h3Vr/AEfUbd1KvHc2FxJbyAhuQpaPI9Qw PesDzSAVyyq4G4AkB8MSNwB+bnkZr7x/bs8N2mtap8Mv2idBtlTQ/jp4K0vV9UaBcQW/jPTLSC11 2BivCyuRG57llfjrXwB5mMDdjjnOPzHrzXp+I/By4G42z/hqlWeKwODqqpgq/wD0E5fiqcMTl+JX RrEYOtRq6aJzcd0aZjhPqONr4ZPmhB3hL+anJKVOX/b0HF/M9t+Gvxy8Y/DeG50SI2XinwJqrY17 4e+KoDqvhXVo2AEjizlbOm6htH7u6tminjIBV+MV63d/CvwN8YNC1bxD+z5Le22t20Eeo+IfgxrN 0bzxNpcdvJLcXl54LusD/hMNHjgaUrAgF9EsWZI5ADJXyVptmlys97ePNDpViI2vJ4UV5meVtlva WyyEK11I/AycIqtIwIXB6LSfHmreHbyxuPCN7eeDpLS6F0L7Srhv7QE8RcWtzJqMSrPJMsbyBgrp H852RqOK9Th7imEMBh8l40oPPuF4wnDD05NLMMEpXi6mV4qf+7U1Nt1MPWlPA1nzt4d1kq1LShik qcaOMj7fC2aiv+XkL6XpTfwq+8W+R6+7zWa6z/hX7f8AQv8Ajv8A8Ed7/wDIFFdv/wANpftPf9Fe 8Sflp/8A8h0V7P8Axpj/AKGWef8Ahiy7/wCiE3vkv/Pyv/4Ip+X/AFEep8o+f7jAz379+3NJ5/Oc 8dxk55649Pyrr/D3w81LxF8OvHvxGt9RtIdO8A3nh6zv9Okjna9vX8Q3DwQS27qdkcUews+45PAU HOR5v559f/Qvevz/ABeS43A0cvr4vDSo0c1o/WMPJtWqUVWq4dzVm2kq1CrCzs7wvazTflSpzhGn KUeWNVc0X3XM43/8Ci1rZ6H7gfsDMF+BZdRky+N/EJY9yVi0xAD68KPyr8kvihqDXfxK+INyxIM3 jbxTIck551u9/oK/V7/gn9crJ8CXQHJh8d+IVbHJBeHSpefbDCvyA+I0zL8QfHanIK+MvFAKncCM a3fDGM9a/qTxmp83gZ4CU4fwvq1VtL+aOHwy/BuXzufUZy/+ELIEusHf1UI/8ExxcHBBY4OMjLAH GeSO/t/9evrX9jH4s6Z8OPjNYaZ4pdX8AfEuwu/hz44tpz/osmj+JF+xQ3cyNwBb3rwSbuSoDV8Y mc+v6n+lKty6MGVyrowZHUkFWUhlZSOhBH5iv5x4Rz3H8HcT5FxRlaTxuR4mliIQnrCooSTnRqL7 VKvTcqNWOqnTnOLVmfO4PE1MHiqGKpfHQkpJPZ2esX3UldNdU2e7fHr4Zan8Ffiz41+HWpq+3QdX nGl3JDBb/Q7pjdaNfwsR+8jl0+SFsjjOR2rtPjH4y8Y6DovgbwAPEVxBol38KfAN7rfhm0MH9mx3 r2N1PamTYrB7iSwntJpGRl3NKu/LoCPe/izbP+1L+zJ8PfjfpKxTfEz4Qzab8KPiyMkXF5ok7xW/ hDxXfFVJ8gF1illYEhpH/hSvPbH9nbxv8eP2i9a+H/hGJYtC8DReGNC8W+LdR3QeH/DWleGdB0nS tQubu7cBSWe0uRBEDumYgqNuSP2jOfD3M8Jm2dYLw5wmLzDK/Earlc8iWGnNVK2XZpDH4l4Wag1z ywcsNWwGN52qVOeGxDqrltKPs1sBVhVrQy2M6lLMnReH5W7yp1VOXK7buDi6c7uycZX7n6vfs2eB L/QvhL8NfCOmWLy348Naff3kaJg/btaQ6xeyztwEAmvWBJ6CMZ6V9RvH4c8CgG78jxJ4oUZFsDv0 nS5ev78/8vEwOPl6A9h1Obe+ItJ8JaXH4T8DfJDb20Flfa+Ri7vRbRLB5duw/wBTb7VwMenHcnzd pS7FjuZmOSWOWYk8kknk5r/VjJsuy3gvJspyPLYU8bjMowtDDRq2UqGHWHpQpRjQi7xq1IqCvWkn BP8AhxbtM/VKUKWCpUaNJKdSjCMb6OMeVJWS6tW3ei6Lqb2seI9W165NzqVy05B/dQ/ct4E7Rwwr hY1A44GfWvItXbw18KvD3xJ8eW1rFZfaV1Txx4hkyFW91Wz0e3tY2AA+XzBYWyhe8k7sOXNd9vHo f0/xr40/bv8AE1/oPwEvLOxDhPFHiTRdB1CZWK+TYZuNUkRgOqyy6dFGR6Oa+F8RM7/sLhfiLjDF w+uZhkGExWKoVKi9pUjiPYTp02pO8lzymqc2mv3cpJ+6cOY4j2GFxGMmlOph4SnFvV83K0u+97el z8Z9V1q71vVdT1jUZTNfatqF5qV5IzMTJc39zJdTsSeoMkrV2klz/wAJxo0kxO7xl4bsN9wxb974 o8M2MKqblsnM+u6dbqPMPL3NjHvOZLV2k8k+0H1HQdj2r1f4E6zp+lfGP4bXurRW8+nL4s0u2uo7 pBJbBL+U2CyzLJwUSS5R+ePk5BHFf475DR/tDOMPl2OrpYXP69KjiKlRtqDrVVFYlvdVKEpuqpLV rnpybp1Jxl+P0P3laNOcvcryUZN9Lu3N6xve/qno2n9wfsP+G5fiD4gk8U+LdAsdRtfhfZ6Xa+Dv EU9vJa38F7Ot6tppT+Uqw61Y29pJPNFJMjz20iwCOXYdg/WfT9TvdOvbe9spWiubeQSROnBBXkg4 6oRkMOhBOa5OwFnpdhFFHDb2sYBKW9rDFAgUHaixQxIqqoVQOgAAr5Y+Mnhz44fFXxLc/Dzw7rk3 gf4d6jpNnqcXjHQ4pRIZYLkW2t+G/FU4vUmLTQSrLZrZgBzGFn/dmVh/qjwjkUvBngXA5bl2GxPG XEDq3csLSp0cRi8VUv7CVacpyVClSpwpYZYivVqezjCF3y2jH9SwlF5NgKdOnTljq7d7wSUpzfw3 d7RSSjHmk3ZJdND718Q6/wCG/Ftnb+LPClzbaw/9qtoHjC30Ca21GDw7rsVq908mrvbzH7DG8aKD nJMk8akbmOOXWVWJ/hA7sQKzP2Zvht4J+D2hy/DHw/bsukeJIWTWNUvXEuo6z4gaMCLWNQlzjzy6 hURQEiXaqjgk6mo2UumX15YXGElsp5YJSTtUeUxBck9E2jOemOa/a4vNMwyfLM/zjC0MDm2YprG4 fDTdWjh8XFJyjCq4U3UVSEo1JT5IRlVdVQXIont+/Uo0sRXiqdaqvfjF3jGatdJtK90072SbvZWs fKf7ZnjuHwb8ENds4p1TUvGlzbeFbFFI81oblvtWrSKc52rptvMhI6G5Ud6/EDzeOMAY/Hp0+vSv p/8AbD+NcHxS+JR0nQrwXXg/wKt1o2lTxNm21LVJJF/tvVoyDiSJp4Y4YW/iitQw4evk5ZeM54HA 5yOfp9K/yQ+kjxvQ468SsfVy+v8AWMm4epxy/DTi7wqexlOWIqwaupRniKlRQnFtTpQpy6n5PxFj o47Mqjpy5qOHSpxfR2+KXzk2l3SRfMgz1Jx6fn+dMaT3PHGScn1/PFUzL75xggY61E0vvg9Tk564 9vr+dfgipX+yeEaMbxPNEs0pgheWNJZljaVoYmcCSURBgZSqFm2ggtjAIzx1c3hmG9uLW28Ka9Ze J5brcgsfKm0XVlmjXc4+w6m6pLBjJR0mYsFO5EbivPzLkk/l259vQcVE8mVAYAjHBx6dM16OF+rU 4yp4nBLERm4++pzp1YJPWNN3lS95bupRqW0asVFxWkocyfm016Pb74s6/wAUeF/E3grUX0vxRo95 o94oQqtzse3mWRA6PbXkDvDdIVYYMcjDtwQQOWaYLyDx17YyT2wOnNdp4W+KvjLwbpmoaJpF9Y3G havPDPqGi67o2leIdKuJIFdI3+y6xaTC3bY7BjEULcZPygiPW/Gvh3xRIs2seCdF0K7FssJ1DwEj aDFJMh+W4utBuJJrOQ+WNrCEWzN98tmvbq5bw9iKXtsuzKrhK8rv6tjKXMo3k0oQxlDmjWajytzq YXBptyXKlFOWso0GuanUcZfyzXnspxvzO3Vwgt/nyljFfahf2VjpltLe6jeXdva2FpbxNcXF1eTy LHb28UKqTMzyso2gHOcHjNfpFq3h3wDonh/WvgRP4P1ix8NeHtFsPiX8ffHmkaxJLL4M8XrokdzY aLo3mweRrSpJIIYrCXJY3h8v5o3lGf8AA/wv8LvgF8O9L+N/xB1qzXxV48jZPhlFreiXcOoaCIo7 tJLiGCL7T5Ek6tGzaj5TxW8M0TqreYVb5T+JafFzxBBpt7daW1h4G8XeKJrbw5aeGtcg1vw/rviL UpjM1xeX9pfSza9r8xkDNcXwExxsjjhQCJf3HJeH34bcLvMcfg6ee8RcTUIVKuX0aVHFzwWVVYWp Qxk+Sr9ThmrrUXVnFwrPCKNCi1XxMq2D9qjR/s3C+1qQVfE4mKcqcUpuFFrRTdpcircyu1Z8lox9 6TlT9m0XwQP2htL8NfCL9nHUzGNMuLvV9R8B+J7Sbw/rGtXaQwRt4u1zxFbz3Gn65exKbhEBNqLa FwkUbHJr9LPgN/wSp8AeGray1v446tP4618rHM/hjRp5tP8ACtjIdreRcXSBbnVyCCrEGGM7eAwO T9Y/scfsw+H/ANmz4X6Zp5sreb4heIrK11Hxzr7Rq15JfTRrMuiW8xG6LTLTf5aopAeRHlbJIx9d 5PrX+ivg19E7hLD5fkvGfivw7h8642r4eg/7Pl7SWV5dTjCCo0Fgqk6lKpiKUElXUr4SFVyjRw8e X2tT9IyXhLCRpUMbm2HjXx0ox/d6+yppJcseRtpyS+K/uJ35Yq13+On/AAU5+G3w2+G/7PHgmw8D eCvDPhNV+IVnBB/Yuk2dlcvCNI1FpY5buOITXCnbGW8x2yVBPPNfguJsdDj6Hp9OeOa/cz/gsT4u hg8N/BzwQkw+0Xmr6/4luIQw3i3s7a3062kK9gZri4APqp9DX4Q+cB6fnnn3/Ov4O+mfDK4+POfZ flGEo4LCZPgssw3ssPTp0qUJLB0qrjGFOMYR5Y1YxskrW8j4HjX2Sz/EU6MVCFGFKNopJJ8idklZ aXNUS/7XXnp35GOOlP8ANH+zn6/0PespZSTycc+vU+w9KlWUcY6j1PP8ulfye6Xl+h8oaglyck44 Pf8ApjFSrL6fQn2z9PasoS99x+hyalWT16Hnjv3GQetYyortYDVEo9cnoD2+hHr1/Kvrv4l+CtPk /Zb/AGffidptmkV0+seOvAviG4iRVM9xYan/AGtpclwyj5n+z3dwgJydseOg4+NhIeOh6dOvsfav 1GsvDx1//glxc6ls3y+EPjRc6xE2MmO2nltNNuf90f8AEwXP0zX6x4VcOU+IsF4r5dOgq1XD8J47 H0m4qUqdTLcbluOcoPeMnSo1aba3hOUdmz1sqw6xMM1puN3HCVKi8nSqUp6fKLXo2dh8KdEP7Qf/ AAT18feCkX7Z4t+BXiW68T+HVBD3S6Y0D6tLaxZJIieyfWgAMZaBB2r8oomRpMTM4jQM0m1SWwqn CY/hLOFXJ6b89a/a7/gk5pulS6T8Q7u3u2uW1UjQPFehXLK8KhY/teg6jDFj/UTWb63bygkgtCmM biK/ML9p/wCGV38Ffjn8RvASLNb6dbaxc3Wjt8yLdeHdXddS0zgAb4vIljUjkboPUV+n+MPB+NzL wS8BPFqrRU6k8BPh7H1INTjJYCrXllFSUl9t4KNTC1btOEsIqe8Vf1M3wk6mS5Dm0ldum8PUa1T9 m26TfnyXi/8ADY8da7ibTmjLwpLLJJKY1aUhVge3S2gWJYyI22vdNvLHcB8x3AZxi+Mk5A+vfn2q qXHJz07A9MdAKYZD0/LnI9jX8rVOaryOSs4RS0Xb8Lttt2W7ufKt3t5Fvf8A7X/j3/16KtfYYf8A n+h/75P/AMVRWn1Kr/Kv/A4//JD5Z9vxPQPDlrrmu/CXwt8PfD9vENV+Jvxjufs++RbQagmg6Hpe nWKX1y33tPhv9ZvHy2UjZJGALV4Tfxvp99e6e8sEz2N3c2Uk1rJ51rNJbTyQPLbSgDzbdmQlWwNy kHvX1j8MxrGmr+yj4uuzY3WhQar8RdI0qxluLaS7fU7bVdavbp20+RSTYj7RYgyNwSdg5xXxzqer S6pqWoanPFawTaheXN5NDZWsNlZxSXErSvFaWlsix2tuGYhERQqgYAAr9b4syqjQyfh7EVHVWNlS oUYQnHlhHCrLcuxilFJ/bxGPryTu+eNpPlbd+7F01GjhpNvnajFJqy5fZUp3XrKpK3da+v7U/wDB ObURc/CHxTZhgzaf4/uWZQTlReaNpMqk59TG/wCVfld8aoTp/wAYPijZOApg8f8AitdvOADrN24A A9mFfoR/wTO1YS6F8WNHL/Nb6x4Z1RY+flW6stRtHYDtlrVAT7CvhX9q2zbSf2ivi1bFdgl8VT6i gxgmPVbS11FGXAxg/aT7+tfs/iNS/tD6Ong5mHxLBYjE4V+TvioJeWmF/A9vMv3nDeTVEtKcpQb/ APA1/wC2nifnjPIPufzBpfP+v4Z+prH8/IHPp3J/ECt/wn4d17xv4l0Pwh4Y0+41XxB4j1O00jSN OtUZ5rq9vZlhhjVQeF3Plj0VQWPANfzBQwFbFVqOGw1GVfE4icYU6cIylOc5yUYwhFXcpSk0oxSu 20kj5aMZTlGEU5Sk0klq23okl3Z+hf8AwTU1TxhL8cNQ8LafoY8Q/DfxV4Y1Gx+LVpfukOhaZ4Xg ie4h1/ULi4PlW89repGYSxDMZGRCMkj7G/a01HW/h9rafCvwrqXhn4IfBqTxDZeOvFvirVNcguvG /wAcdYvL+21WZtK0rTZGvNX0VZpI7aNCY4QYjvYRxBB8b/tC+OdD/Zc+GP8AwyJ8JdShn8Y6nDbX /wC0d8QNMkUXOq6+8QkHgLTbyM7k0ayDBJwG+dwVOC0oPv8A40sNL/bG+C3hLwBFbQWn7Q3ww+Dv g74ifC+4aQGf4geDZNFjTxL4Wiml+e51C2v9NmlhTLNuxgYLtX93cI1Vkfh7xD4NZbj55r4h5BFY tqFWFOlPEYlzqZhwnhMVSpSxPLGFHnxEaGKoLHZnLEZdRn7KtKWJ++wc/YZdiclpVHVzLDrndmkn KTbqYSE0uayUby5ZxVSq5Uou0nzfocHEgEinKuA6n1DDcCMdRgivmT4+fFHUdF8RfDD4QeD72S28 a/FDxTpkV3dWjD7ZoPgmxvUn17UoyAfJuJ7e2uYInPRI7hwQUBr1n4deJV8Q/Dfwf4onWaN77wpp d5qEHlyPdQXtvYJFqlo0AG9rqO+t7qMpjcXj24zxXyj8IPhl4v8AFX7Rfjb48fEm80ux1PSkuNE8 IeBLbU7LV9V8NaNeWws9JuNd+w3Dpot4NKN1i0cec019PK4QKN39CcY5nmuY5fwzlPDdOq6vGWIw 0auJp3hHCZY1HEY2v7X3VCtUw3NRw8U1VlOpKdJN0W19Fja1WrTwlHC03fHSgnNaKFLSU5X6ScPd it222tmfeRwSSOBnge1fB/8AwUN1GGz+B2l2bn99qXjvRVgAGT/olhq1xK3soXaPq4r7nr8nf20P jFYa38XNB+F1lKNS0Xwd4d8VP4us4WSSC81zWvD11PFpsu6NwJbO3tLGQttYxTTcYeM48fx3zPCZ b4aZ/hMViI4etxD7LLqF1fmq4qpGMrR3ap0VVqytqo03a7snjn9aFLLMRCVoSxFqUdnrNpPTyV5P yT6n5l+eSOvX6nP5HpT472W3kjuIZGjmgkjlhkVirxyxMJI5VJ6FZEU57ECsMT4HJ42jJ5549a/S T9jj9kf/AITcaf8AFf4o6cw8HxyLc+E/C92jIfFEsT5TV9UibBGgLIv7qPj7Wy5P7gfvP80OBuAc /wCPuIMLw/w/h+fE1ffqVZcypYaimuevWmruEIXSVk5Tm4wgpTkov8wwGBxGY4iGGw0bzlq29ox6 yk+iX3t6K7aP0s+C/ia4+JXw08FeNL22u7GbWtCspr2C6t5baZr6BDa3skKToC1nJcwySQyAbXjl VkJBBr2VFWNQiAKg6KOg/wDr186fHH9pP4b/ALP+mQRa9MdS8RXFsn9ieCdDa3XUZbdFEcM10MiP RtJUKFEkgG4JthjcjA+O9b/4KN21tqVhd6N4Vi1zQNU0OzubrSTeXOia/wCFfEETSRalptzevaTW +t6e+IZreeII2yRldQRtH+meZeJ/AXh/DDZFxPxdRxGfZfRoQxcqdOc6rm4Ri61SlS9q6bqTSnKj B1KtNVIzlH2V6i/UKma5dl6jh8Xi1LEU1FTaTb2S5mo3tzPVxV2k02ran6mXOr2nh6Fta1HULXSL PTgt7NqF/cxWdraxwurefNPM6rHGH2jcTjLAZyRXxj/wUb/aA17R9I8E2fw6P2Pw98Z/CD6xf+Mo Gliup7a3mbTdR0XTEeNWsXkKA3ExxIY5gkYUMzV8SfHX4vw+Jvg9F4rXwzN4O8S/HfXGW509/Emr a8t78PfBN0Gh1FIL9lh0f7b4ndVZbaGNJ00osc853/ijKfF//BPb9nnxNMzS3vgH4m+NfAjTyMXl FjqEX9qW8BdiSIxsXA6D2wK/KPEDxpxfFPC3iTwXwxU/s36vkGHzqGLo1KvtalP+0MJTlRSrUKFS iq+T476xUtCNSDm6SnKMfaT8jH53LFYXM8FhX7Plw8a6mm+Zr2kNNYxa5qM+Z6XV7Xsrv4LSXGAC MDn1/A/l/SrCSgYJ6fU8noM/jmsVJffOO/ORx/8AWq2spz17DA55/wDrc/rX+b9Si9bo/OjTaQ8Z yBz0zz/kH9KiaQ8479x6fT/PTioPMO3qc989D+R7cV6D4B8CR+Mf7e1LV/EVh4P8L+GdLl1DVvEO pxvLFJdssg0vQNLt0ZTf65eXCMkMIYYWOSVyEQ56MuyvF5pi6WBwNJVcTW5rJyjCKUYuc5zqVJRh TpwhGU51JyjCEYuUmkm1dOnOrONOCvKW2qW2rbbskktW20ktWefmT0JPsSR+pqN5MZ7cdCT364/z 2qu0nGcHGc5zzjJxkHoenrzXXeBPAniP4ka+PDvhuK0a6WyvdUvLzUbuPT9M0vS9Nha4v9R1LUJj 5dpbRQKxLMQGIwuScVWBy3F5ji8PgMDhp4vGYucYUqcIuU5zk0oxjFatt7f5ChCdScYQi5zm7JLV tvojlJg8Wzeu0SRJKnIO+NyQrggnqVORnIxzX1J+zj8FfD3jKHWPir8VdUt/D/wc8BXKDWrm5maG TxDqqJHPDoNqVG94j5kHm+WDJIZ0gjG9yyLN+zpb+NfiX4X8GfCPxIfFXg+58K2Wq658RbiBoNE0 pLG/1Gw8UahJJLFGqWcV/Z3CWiE7pgEO4qWYYP7QvxI8JXFroPwX+EpeP4V/Dqa5zqKufM8ceL5Q IdV8WXrA4uIy6uluTxhmdAqGMD9ZyThTD8HVMdxXxhgKGYZfk1R0MBhJVo1KObZkownFQnRbjiMu wkZqvi61KXsqq9lho1G8Rp6tHCxwbqYvGU41KdF8tODknGtV0ejjfmpQT5ptPlfuxu+Y6n9o740/ Cz4x+PIZrTS/Eln4Z0DSNP0Lwxr2jz+RLHpsFuJpobjwbq6LBCEvZZIw0FxA7R26Fi+Fx6F+wd4W g1X9pf4a2fhvx5Yar4eOtNqviDwtqkM2jX1/b6ZYXN6hk8P6l5tpqzxXEUREltNJPEQJVAVSR8F6 /rNpq9xZS2ehaZoEdppOnabJbaW140d9PY26wT6vdte3EjNqNzIvmTbCse4/Iijr9LfsMeJj4W/a q+EGsGKaW2h164h1EwoXMGm3em3kF/eyDPyww2zySSMSAqREngV7vBfFn9u+NXCWecQ0cPipY/P8 vnWxGGhVwtqc8ZQTjCMHDmoxhaHLiKVSpKinCU3fmW2Cxv1jPMHiMSozdTEUnKUU4ac8dkrXSWnv JtpWbP68TjJ3Ag89PX6GobiaC1gmurieKC2t4pbi4uJ3WKG3ghQySzTSyECOJY1ZmYkABSScCvz2 8U/8FQ/2RvDcV39m8Xa/4mvLZpo1stB8Mai7TTRMyFVub8QRBCynDbsYOeRX5SftY/8ABTTxz8dN G1HwD8ONKufhz8P9RVrfVpnuxP4q8RWh4Nre3duFTTtPcffghJLg4kkdeK/1l8QvpT+DvAuUYzF0 OKsLxZnEYS+r4DLK0cVUrVUvdjUr0efD4enzW9pUqzUlG7hTqSSg/wBdzHi3JcBRnOGMhjKyT5ad KSm2+icleMVfdt3tsnsePft6fH20+Pv7QPiDWdDuvtXg/wAKwx+EfCkysTFdWOmSy/a9TjH925v5 LiVT/c2CvjES84JB7dOPqOOlZYkI6ng9cZGP/r5/lXaeHPh58QPFyQz+FvBXirxFb3NwbSG50jQt Sv7SW6Gf9HS5t7dkaU4xt3ZzxjPFf4s8S5xn/iJxbnvEuNozzDO+I8VWxVWFGnOo1KrO6hThFSkq dNONOmteWEYo/EcViMRmOLr4mcHUr4iUptJN7u9klrZbLsrIxoPPuZY4YY5JpZXCRRRI0kssjHCp FGuSzlsAADJJwKlk82CR4JopIJo22SRTRvFLG46o8bgFGHIwQMVHb3eueFNcguY/t+ha/oOoQ3EJ liktNQ03UbKdZYpPLlUNBcRzopGQMEA4r7B8X6lpH7Tfw41n4jQabZab8fPh7CNT+JEWmWws7T4i +ClW0sYvF1pp9svlx+JLKdlOpbFQTxXAucZSU1hk/DFLO8Hm9KhjXQ4hy6Eq9LBVKdo4uhRjKWKj Sq891jKEI+1jh50lGtShW5Kqrwp0a00MPGvCso1OXE0lzKDWk4xTcknf44pX5WveSdndJP5EWTBH cnr+OT/Mf561KsgOPXk56dKyo3LlVQMxY4VQCxY8DAAGScj61YLFWKurIykhlYFWVgeVYYBByO/P HtXyEqLSulp3OU1Vl5H8+cY+uOea/af9m+2TxZ/wTJ+PuhIpmm0nU/FF6qKN7q9tDoWsI2O2Ft3P 0U1+JKynjJwOwGee9fuN/wAEvZovGHwE/aW+Gsh8ya8iklgtyQTs17wzqWnBgp7faLWH8cV/SP0U MNDH+KGY8OTt/wAZhw7xDliT1vKvltapFa7tujoj6fhKKqZpUwz/AOYzD4ikvWVNv9D54/4Jk/Ee ++H/AO0la+DNQS4ttP8AiRo11oNzaTxyRsmqWsJ1bRbloZACrFoJEDY+7dEg4NfS/wDwV0+E4Q/D 740adbEZE3gnxJNGvGV8zUNCuJyB1Km/iBPaNR6V5lB4PXwZ+3D+yNrsdoLNPHPg/wCHWqXSKuxH 1W10Wbw/qTY/56GaxUt3y/vX6+fta/C2P4w/s+fEnwYsPnai+g3GtaFhQzpregqdTsPKBH33a3kh 45IuSO+K/rDwy8Msz4p+jH42+D2Pn/aGO4MzbE1cpbjaSqU8Jg82wqhFt8ixU5TTSbssXUV2mfW5 ZltXFcMZ3k9R+0qYKrJ0dNbqEKsLLpzNtf8AbzP5E2fjg5x69eeuPyp4KYySwweCCB0PB78Z7d6q SBo5JIpU2yxO8ciN95JEba6EH7pDK2R6jFQGQjjJHoP69frX+WUabTs1Zp7H5Ze3Q6L/AISDVv8A oJP/AN+rf/4zRXM7z6D9f8aK6/rOL/6Can/gUvLz/q4+ef8AM/vZ9KaN9on8R/sVeH9AdYZx4ag1 xs3VtZxnVNa8deIZ9Xm869xH9oaOwCbfmaQxpGgLsqn431N5YdT1GKXKzRahexTDGCJIrqWOQEdv mU8deK9p+K3jXUovh3+zR4etLgW48L/D2XxLbTxWsdvdx6rqvjHXp7eYXap5kqRQ2Nt5ZD7Msz7Q zGsn9o2zt4fiO3iTS9Hg0nw9498OeF/GuhvZweTp+pLrWhWEmtX1miEqjHxCuqLOikiOdZF46V+5 8YYWjjcvrVMNNzlkssr9pG1oqGMyfB0rQgnJRjhauBVGdSU7VHWopQg1aXpYtKdJuLu6Hsb+lShT Wi1soOnyt315louv2L/wTR13yfiX8QtAaUAav4Ktb+OMnG+XRtZgUkA9SItSf8DXl/8AwUA0ptJ/ aN1q7KbY/EHhnwvq8ZwcOUsG0qZgc8nzdNbP1rlv2DvEo0P9pbwdA8uyPxFp/iLw42M4eS80qa7t 0PPObmwhx719A/8ABTvQmtvF3wu8VquF1Pw7rWgzPjGZdG1GG+hBYdW8nV3/AAXpxX6fSo/239Fr EU0uafCOeKTW7jGrOCT9G8xl93qesv3/AAlNb/UsR+bWv/lU/NHz/fnnsf8APr+dfpV+zbb2P7Mv wE8WftfeJLW3fx54oe/+HX7O+mXsas6avcW7w+IfHUcUnJhsrd2jhkAK+YrAHLA18FfBr4ca38Zf ij4H+GPh+NpNS8YeIdP0lXVWK2lrLKpv76X+7DBZJPI7HgLGSa+mf29PipoviX4p6f8ACXwFKq/C v9n7Rbf4Z+Dba3INte3ekqsXiPXiI/llurvV0mJccusS8nNfnvh9h48J5JnnifWgnj8qnHLsiUle +cYmnKcsbFO6f9k4NSxMH9jG1sBJ6Np+bl1sHQxGay/iUX7LD/8AX+Su5/8AcGF5rtOVM+P9S1m/ 1jUL7VtUu577UtTu7i+v7y5d5bi6u7qV5p55pWJLyNK7EnPO6vuvwTB41m8N/s7/ABu8C+MrLwTZ /CPSdb0Lxd4+8Q3yR2fhjUNF8V3mqWWjvY27m41v7ZpOsxR2lhDG7zpI0bbVDMPiLxz4E8ZfDbVr bRPG+gXugajfaVp2t2UN2vy3emanbx3NrdW8yEpKAsmyRQd0UqNHIFdSK9jt5Lu6/ZE1hI4okttH +PmkT3kiSy+dP/avgm7jtTcQmTb5aSW2EIAyZCTkivM4NjjMnzXiSGZYXE08wwmDqYlw56uGxMMX gcRh8fSlKoo+2puM6F6jXs6vs3N06tOo4zWOCc6NbEqrCUalODna8oTU6coVFd7rWPvbO17NPU/X b47/ABh/4XL+yjr/AMUf2Tk1OPUoPEAtvi5puiQtpfiPwZbTyXN/rfiXTNFgnkm0/SdRu4xLvjY+ RFeTksHD7Lv7EXge68J/AvSNd1Z7ifxF8SL+78c6xeXkss99dRahtt9HN3cT5kmc6Zbwy5dmO68Y 55r8h/2QfjH8QvhR8b/B7+A5Ir5PGesaZ4O8TeFr9Wn0LxV4f1y8isr/AE3V7InbNELeaV1bG6Nk 3Keor+njXfBmkNo0HiD4fwRp4btoYre40G1jRZPDawxrGltHbp93T1RQEwMKqgDjp/cfgxjf+IwZ nV8UMTKdLiLhjALK8Vl0Y8uCjUqSVR5nl0U3yutQUoYyg1KdGpOU4zdCpCFL77I6rzqr/a0m44rC U/Yzp2/dpuz9rSXTmimpx1cW278rVvmf45eO5vhn8IfiD44tJlg1DQvDd9JpMrKrhNZu1Ww0h9jg h9uo3Ns2DwduCCOK/nX8DeIbu4+Iuk6tq1zcapd6zqt5FrE11LPJc6s3iGG7sdSjuJ4z5hluRfzI XU7gZtwOQK/XT/go94wOh/A/SfDcc2yfxn4y062kjVsM+n6Hbz6vc7gPvR/bE03Pua/Jb9n/AME+ JfiN8YPAnh3wtAJNQj1/TNauruRWNrpelaJe2+o6hqd620hYI4YQAD9+SRIxy4r8S+kdmWYZ34q8 I8L5dz4mWUQwnJQhed8Zi6/PpTvZzdFYda620btqeFxPWqV83wWEptz9ioWiv55yvttdxUd/yPo7 9jb9mib40+KpPFPi6xmi+G3hC9RNRhmSSL/hJtbhKyR+HIWJB+yR/K96w6IVg+9Kdv6U/tSftOaH +zz4Yt9C8PRWF58Q9XsBF4Y8PoqfYfD+mohtotc1S1iwIrCIJstbcbfPeLAxEjmur+J3xB8Afsof B651CysLW3trFru28KeGo3SK58R+J9UmuL5xI6jLl7qae5vZ8HZErYwfLWv58PiD468U/EDxnrnj HxtNI3iXX7r7dfLLBNaJChRVtrazs5zutbCK3WNYUHyhFGOtenxLmOA+jtwTDg3hatDFeInEMI1c fjoRu8NCakoyTa91xXNTwVOVrfvMVOMZSip6YqvT4awKwODmp5niknUqW1gn1+66px6azer10tQv /GPxE8QajruoSav4q8Ra1fLLqF+6S3l5eX12zeTAuP4yEcQwR4ASIrGgRDt7zwD8HPFHjPxn4P8A Cs6w6PbeKbd9bk1SeaKW3sfCNhFNd654gke2LqIra1tb1GQkSLc2/kSIrnFGpfCHUtA8AeANdg1m 7u/iD8Q/7Q8T6N4C0YeZdaf4C0vTryYeKNVmimDWN3J9nupYVIwbRJHDbgyj3v4BeEdZ0D4QT+Ld M1efwx4m+NfjXTvhR4a8TwJLNqeieEUvYG8Sz6BbQsHbUdQ1eS1s1cGOOOOznkeVADu/nfh/gzEZ jxDQo8RYHE4iTpLMcXP28G50mqFdUqkmm418V9YoUW6tanKjUxdKrWcY3PnMNg5VMTCOJpTnde1m +Zax92Vn2lPnjF80k4uacrGL8bPC3jn4hyaP468NeFNZj8AWsA8EfDDw3Bo1+2oW3w98KqljpviW 7EVsI4IdR1OS9c+YUmkuJJCqtGA1e+eNdH1Pwb/wTZ8E6R4htnsNW1r9obVdQtrOWWGRxawaCQ0g aCV1+6ybgGJVjtcK4ZR8hfG/4i6h428aReBPCOp69eeCfB9xZeDPCGn3N9dXN1rl3pAGjv4l1IZz d61f3iyyZbPlpMscYUAg/U37clxb/DH4e/s1/su2k0Z1L4Z+Bj4s8eQxNk2/jHxuU1CazuAD/wAf ENuxznnEwr7rD1cpo4Xxu4ooOtiFSymGUSxM6kPq+JzLM8bhKU6eFpRppxpexwuNr4aKq2p4XDJe zSty+lCVGMM9xcOaSVFUedtcs6lWcItRVtFywqSir6Qjt2/PVJQeM4Axzzkn/OatLL3z7ZGD/ntW MknT8hx+HOTVpJcflyTjB6Yr+Yp079P8z5k2VkyCO3X8jnI9RW1capqg8M2Gkm7kGjnWNR1SKwzi FtRW1sbOS9kUf61/s4WNSc7AHC43tnr/AIe/BX4pfFCK0n8C+DtX1uyuNSl0x9Vji+z6PbTxxwyu 11qVyVihhVZQWYMcbcYLcH730z9hHwH4Y0ODXfjF8VYLCz8MaZJqPjCx0FrSzgtJbi4eZEfVbtnm SDyFihjxbLLPIp8kcqK/Q+DvCjj3iyhi8Zk2T1MNlapJzxuJqRwWDdNyjOT9vXlThVhGEZVKkaft OWMHJrRJ+ng8qzDGRnOhRcaNtZyahC2jfvSsmktXa9kr9r/Dngr4O+I/ib8QNB8GeE7doB4m0u01 2LUZ4Z7jTNF0y5s5Zbi81KW2VjDZxX9vc24JO4uqoAXOK/R/Xv2c/Cfwr+G+geHNZ+LWi/Cvwdf2 Tp8Y9cggNt4t+J93A6m30zTbi6meS00ICW7j+zwRsZEaN5I3YkV4nqP7b/g/4a2ln4O/Z9+F+n2X hzRok0uLxD4okmOqanpsVzcXJMcEJ84bri6upka6nkIe4LmFcla+AfGvjjxT4+1678Q+L/EGqeJN TuJZGW71S5edoYmclILaE4SzgCYASJEUAfdFfo1DOfCrw2yvH0crpR8RuMs05qVavTnisHl2DpNU pVMPQrR9lXxVGpOM6VSpRVD61hpzoSqQozlCr6Kr5TltKoqUVmWNq3UpJzhSgvdvGMlaUk2mm48v PFuLai7P7B+P37R6WOhJ8F/gXFpHhj4PQ6YlpFrPh+5FzqvjHTpgxukv7mSNZ9KikumuRcwSqtzK 5dpXMbgN8HswxgDjp8ufzIx0prP1+u4dj7fjgfpUJfPXtzxnPt+tfkHFXFWb8Y5o8zzar7tKKpYb DU7Qw2Dw8f4eGwlGKjCjQprSEIq9tZynUcpy8XF4yvjavta0r20jFaRhFbQhFaRitkl823dt7P17 /mD+JP4V9MfB6QeBPhd8Xvi9JiLU306D4WeCZSxSVNb8ZRTHXr62PXfb+F7a+QsPutqKHqRXy67j B7jHXnt7Yr6V+M8g8IfCv4H/AAwhdVuH0C++J/iWELtk/tfxtcBNKiugPvNH4c07TmTPQXZxwTXo 8Hx+o/25xHL3ZZBg5ug9v9sxco4PDOL6VKPtquMp21UsLfpcvBfu/b4rrhoNx/xzahH5xu5r/AfN bSH1z3JPf1phk7Ejrn/6x56VWLFjhQSxwAgDEsTjCqoGSxOMAc5omSaCR4Z4pbeZCA8c0bxSRkjc BJHIoKHac8gHpXycaTtzKPup7+fr8jj6Mn34zjpjsR7ZHJ+n51+13/BIH46Xlj4z8V/AfXtZd9F1 7S38TeDdMu5UNvba/psqPq0FiJPuSz6eRKVXq1iGAyK/EUufpz/+r+Y/Kuj8I+MfEngPxLovjDwj q95ofiTw/fwalpGq2MhiubO8t33xyIwHzLwQytlWVirAg4r9L8IvEDGeFviFw5xrhozrUcrrWxVC nPleIwdWLp4mjvytypycqan7qqwpyfwpr0smzKeU5lhcdC8lSl78U7c0HpKPzTbV9LpM/Zz/AILD fBzRfDnif4efGPQ7C20+fxguoeGvFTWsSQpfarpMUN3p2ozrGoBunsZpI3bGXFqpYk5NfmN+zd8S 7T4W/GPwb4n1aM3Phya+l0DxZYmSRVvfCviOCTRddgdYzmT/AIl95KwU5BaMZGK+ubj9rvxD+174 ebwB8ffD1h4x1bwjHN4q8C6R4YuT4Km8WatZ2Mlvqem3l5bwz7tRbTy89vFCkYmeB4VG5464r4s6 p8K/hBcfD7wx4L/Zt8MT+PPEPgbQ/EPiK28Xa/4i8b6jpep688t9pOn2+lW1xbrb6iNPaxlZSrsV uEBUfNn9l8TJcN8WeJGZeN3AOd4fIOH54nAY2FPFYTGfWf7Sg6NOtSdDDYbEYZ1q+IpzxEqMsSpV KU51pLkmm/czSWGxmZ1c9y6vHD4ZypzSnCfN7VcqkuWEJRvKS5mnPVNyejV/VdE/ZC1H4Z/tBz+M pr3RdW+EHw48U6x4v1WW01a0udY8OeGdJsZ/E/hKfxTpV3Fvt7PUbQWCwyiKRJfNKDEnyV8i/DSD wt8QPih4u8X/ABDsp7nwVYW3izxlr9hYT3FpPdy3P2k6JpNlPaxlknuNdvNOiTAGQ5zwDX3r8Jv2 6PCUur6rpv7UvgDwrpviLxPoFh4DuPGPhXw5HNqEPhW3ureIeHviF4WkuxDdaRHbwxICoW/jjTCs pUY3fHnwEi/ZzsY/Fnwz0ZfGnwz1u91r4zyfEvSIv7W0FNE8N2wufh/4Gb5XEBi8R3nmzE4+0R+U smDC6r6mZcA8H57gMs4g8O8RSxnCeQ5jjMyzfAV6Uq2MwFTESoUcBTxmXyjGf1CMaCddOdTDQhLE /wC1yU4U6e08Bg68KOIy2UZ4OhVnVrU5K86blyxpqdNpNU/d97eKTl77ukvx4kkXz5ykbQL50myB 92+FA5KxvuGdyjg554r9f/8Agj34rsLD4ufEjwndXMi3XibwVb3enWojDW9y+i6kkt0XctlJEtbl yowQwLelfj/q91qVzql7f6tBNBf6pcSapOs9s9q0jai7XYnWF1XET+duQgbSrArkYr6//wCCf/js eBf2sPhPfSTeRaa1q8/hS9Zmwhh8RWc2moGOeQLmS3PPdRX4j4CZ7DhLxv8ADrOZvlw9HN6GHqSm uS1HGSeCqylFS91xp15StdqLWt0mn4nD+IWDz3LazdoqtGLb092b5G7ekrn68fta+HoPCf7Qn7Cn iGCJYIrDx5deETjgLbx6zZzW0YPZR9qlx2+fiv1mZVZWVgGVgVZSAQykYIIPUEGvkX9rXw58LtRs PhDrvxOk1fS7fw58XPDUnhzxRpVxDCnhzxFqMjrp02srOhWTQZ7q1ghucEOgdXQ8GvrpSGAIIIIB BU5BBGcg9xX+1PAPDq4e4+8XPZ1qEsJneIyXGU6VOf72lbKKOBn7alZOCnLBc1Ka5oVI8yUuenUj D9uy/DLD5hm/LKPJXlQmknqv3KpvmXS7hdPVPWzuml/IJ+2D8N/+FS/tG/FLwhFA1vpqeIrjWtFR lKqdH14DVbEx8f6tY7opn/pmR2r5mLsTgdfzOPp+FftV/wAFY/hPaXXxb+EXjWTU9O8NWHjbSLzw lrHiPVhcjS7G/wBCm+02dxqD2cMkix/Yr5EyqMQIs4wDX5CeO/h54n+Hl3Y2+v29u9jq9qNQ0HXd OuotQ0HxBp5Yp9s0jVLcmO6jDfLIoIeJwUkRXBA/xW8d/DjG8EeKXiPl2EwEo5JlmZ1J05QScaOH xyhi8JGajrTh7LE06UJyUYTnGUIScoyS/E8/y2eBzXMaUabVClVbTWyjO04X7K0kk3ZNppO6OL3r 6/of8KKrbz6D/voUV+K8i7s8M6z9o+y1LRvEngDSrqzvLPS7D4NfDG28PG5jdIbrTv8AhGre6u7m ydkXz4DrF1qIdwBmRHB5BrT+IOk6x4p/Z++D3xN+02FxZeDV1f4UaxbQ6hZSXth5Ws3+ueFpp7GK XzYHuLO91FMOmdunLKTtkFdT+2Rpeu+L/wBo7x7YeELTVfFGn+CfC+hJcafo+m3Utl4J0LQdCsBq FgoG5ItMspJlMsqlUEl0wPzZz51+zNJo3ivxPr3wc8US3v8AwjnxZ0G80y1a0eLfpnjbQrefWvBu uxRTHElxHe209tgFTJFqjxHKtiv6WzHLIrjvi7hycZywuf1sRluGqymoU/rVDE0vqslJRlCVL6zQ p0JK6dKjVfM1KLT9mrTSzHG4Sz5cTKVKDvZc8Zrk6NOPPFRa+zF6u6OO+DHi0+Dfi78NfE+/Ymje NvDl1O2dqi1bU7eC8LnuPsk0wPsTmv2F/wCClHhk6t8END8TQx+ZJ4Q8b6fLJKASU07X7S60yUgj ohvBp344Pavwbkklt5HQs0c9tKyjjY8c0LkZK5yriRM47EYr+jjx5Anx3/Yxv7i3Q3d54o+EGneI rJEw0ra7o+lWusxooHPnf2npskfrliK/QPBPDPPvD/xf4JcfaVsTgo4zDw6utSp1VorX/jU8Ku+q PTyBfWctzzAWvKdNVIr+8k//AG6MD4J/Yijg+Dvwi/aL/a71OJEvvBXhdvhn8LpZBgyePvHERs5b u0LfemtdNcscchZj718vfsteCT8W/wBoTwLomqhr6ybW5vFfiNpSZPtNhoYk1q7WcsDuWa7igibP X7SQetfSf7Vsx+Df7If7KH7PVsTa6v4t0q/+PXj+3B2SS3/iVvs3hqK6QHOY9ND4VhxtBxVH/gmF p8N58Y/G+qSKrS6T8PZY7dm+YxnUtd0yGUr6ExQsCfQ+9clLIqFbjnwf8LqsL4Ph2nhMVmFN7VMw zFU81x6qK2soYZYTL5J6pYSxCoRlmOR5PJLkwqhOqukqlW1eon5qHJS/7cP0+/ab/Z/0b9oH4fXW iPFbWnjLRUuNQ8Ea66hGsdT2AtplzKq5Oj3YRYpk6IxSZRuj5/FT4UQ6tP4d+PnwA123m03Wr7QJ /FOmaZdgRTWvjj4UXM+p3enkMuWln0JNZiGDtPkIRkHNf0bFl9R+HNfk1+1l4e0v4OftT/Bv45pb pD4a8dakuheO1VE8iS4SBNB1u4mXGM3PhfVVZz/E2nu3UnP7v448BYJ4rKvEHDwjhalGpDLs4klZ Vctx6eAnWnbeph41+RSevs5RbdqEEfRcQZfTc6OZxSg01SrtfapVV7NyfnFStfs1/Kj5K/YO0BPE 37THgiSRN8Ph2z1/xSwxkCXTdKmitHPbi9vLcj3Ar+j3w54n1Xwxfi+02bAYbLm1l+e2vIf4obiL o6kZwcZGcg1+Jn7Avgg+FP2nfjjo0qof+EH0fWtBtpFJePyLjxbawWksUn8SvYWiMpPJV8+tfseW AHUe3fn8K9b6MuUYjh/gGrVV8Pj62aYycpJ2lGVB08La/wDdlQlp5tdTbhOjPDZa38NSVao36x5Y fnFnyr+2/wDA/wAOftW6r4U0j4V+L9H0/wCKvgXTLvxPqvwKv9StdI1XxZomuXMMd5qHgzUb79w+ rbNImSKF1ZQDudVBAbmf2RP2dB+zx4M8QeJ/HWmXPhvxr4me7vtWj8RCKHUfCXg3TpZp9N0jUJgq pDciCM3V8yYQyFF6RCvm2TwPqXx0/wCChninVRc39l4V+Cx8MS6tqFhcXNpI9zomnWj6ZokN5bur RPc63NdNIFYZt7Scdwa/Rv8AaO/ah+Ffhj4ea34U/aD0S88XeE9fsoPDGq3HhyWODxjGviJZlj0+ yaCVZGvG0y21C73PsjENpl3JkUHuyfCcIZ3xTxv4vZ7l9HhrOMkxeOwGDxlatP8As7HSwcPqixk6 SpVKuCqKNJ4aVTDurh5L2tSOGpVIOU9KEcDXxeYZ3iKUcLWw86lOE5SfsqjguT2jVm6bSjyNxvF+ 81CLTv8AhJ+1T+1Br/xz8a6zY6VqEsHwv0u7Nj4Z0f7PAov4LGUY12+kaIym6uriMzKm8LFE0ceM 789j4E0Tx/4z8a/B/wAO3eoSfEPwz4z8N+HPH/jW38V6boeuXGgeGotel0bxO0OsahbyXFtpUVvp YO23kD20VztZEdXNemSfsg/srfGxo7r9mL9qPR/C+pT2H21vht+0BE/hbW495MyCz14Qx29zC0Ms QTasu7buEjBhj6H+Gv7C/wC058OfgZ8X9N0vwx4e8UfEDWdIh0L4deJPBPxH0W4kk8H6/fQ3XiO1 02ZZM28Ruo2uQGEZnW6miWVCcn+dss8PvEviLirNeIM6w1bizAY6NTFzxuS4qOZYarHCc2KWCprB SxChGvBTwlDDYilB03UjD2ak0fMUctzbE4yticRGWMp1E5uph5qrB8nvqC9m5WUleEYTirc1uVM+ WvDkf/C0/wBpPxV8PNY8NfDuG81DSvF2j2PjXS38TQ6LYeB7fQojoc1iNP1OKKHSYfB0KR21wIY2 f7WPNfDMT7/qPxa0z4fWF54ni8N5+DXgN/C0Pw80BLsQ39mbKa8t/hlqltpD582bUZl8SeIL6S9k Q3Vr/ZjIVZkz9E/A/wDYb+JHh34V6vqXjPw/ZeGPjD41+Glz8PtSvvEfiHRF0zQdC00XFhpjaith qImlt7u1Glx3jxO9yY7NU3RnC1U8f3f7IHwB8MHwN4n8b+HPij438C6fFrOsfBvT/Ebaf4N8ReNN D0K0TSbfxR4gu7SSbXLOxTSoYbDTDKdpZI7j95tWv0fL/D/irhzIK2fZ5icNwXiM1liMc8ZmUaeG qwddOWCwFWhOkq+Mq0Iqpi8Xh6NKrWrScIeznVoR5fWo5djMNh3iMROOAnXcqnPVSg1za06bi4qU 5R1nOMU5SelnKKPkz9nfwNY+ArPXf28f2krG1tdFt9X1HWvhL4HuLSHTbj4o/Em8nmu7O70/RwB5 Hhm0vHEzSBfLygxuC/N8CfEb4i+I/ip478U/EPxbete6/wCK9Xu9Y1GZidkb3MhaK2hB/wBXbQwi OKNRwqQqBgCvU/2o/jl8Qfjh4j8GeJvHGo6YIJvBdlf+H/DHhzNt4Y8JaRfalqYsdF0zTEPl2ctv ZW9tDLhQ5aH52Y816B+x58B9M8fatqXxW+JBt9P+EPw236nq1zqZ8mw13U7GI3a6e7PgSadbqqS3 eM7iY7cAmUgfzXndKrxlm2TeFvA1Or/YWErzxdfF4u1Otj8bVpRljM6zKzlGhRoULxw9DnqLC4dS XPUxGIrSqfM1k8bWoZTl6f1eEnOU56OpOUU516u/LGMdIxu+SN9XKUm/T/gB+wnqPxC8LWvjv4oe JL3wJoGpwx3mh6VZW9o2tX2myAPHqd/LqDeXpNtInMSMjyujLIQqkA/Vvh/4BfspfDr7Uy+DdV8e y2DC4ufE/jW5MHhSwmhhaWG1bXtZksNKDSNj5I1uSWZd3Ar4w+NX7eXxI8Wa9qGl/CnUz4G8AWjG y0eS102yTxBqlrCoiF9eXN1HJ/ZyttzDDAEMMZUMxfOPjzxH478aeNZRP4w8WeI/FEiv5qf25rF9 qUUchBG6GC4maO34JHyKoxxgCvoq/HPgzwFCllvCHBceMM1y29OrmmYUaU4YqrG6nWw6ryxEKdOU r8lsHH93ZJ3/AHj63j8jy9KlgsCsdWp6OtUSam1vKPM5JJva0Fp95+q3j/8AaysNGCeGtL8ceF/A HhmzjEUfh34I6TF4x8VC2UErYr4wvoLXQtCkZQA72cV08RbhmYc/AfxQ+MeqePBPoekQT+HPAiXv 2630B7x9R1TWb5SwGv8AjXXpQJfE/iJ2Z3Mkp8m3Mhjtoo0GT4TG2OBgDJ9uemB+Nd94v8L2fhW2 8JqutRapquu+GLHxLq1jb27JBoS6u0lxpNh9rZz9qun0c2k8w2J5L3Ij+frX5RxZ4lcacb4bHTxO J+r5Zh1FVIQqyVqdSSp06EVOajGEtHPD4KlQo1VT9rVoNUVKHmYvNMdj4VHOfLSja6Tez0UVd7Pr GCjF2u46XT9D0Cwv/B/j3xDfC+WXw7F4ah0iS2eJbZtV1vVzbG3v1dSXhbS7bUXTYVKvbjqCRXBM eOfXPJxnGOmPoK9u8F6e0fwa+NGv6lpcl1pLy+BNC0i+PnRRW3iyTXJr2GaKRMJPJDokeqiSNs4G oRnHII8LJ/IfXA/PtXxOaYKGEwPDdVUlTqY7BTqyspKU39fxtKM5XSTvCnBRabXLGOvRcFWHLDDO 1nUg297v95NXenZK3kj6A/Zb+G3g/wCMXx5+Hvw08dahqemeHPF2qS6Xc3WlTQW+oC4azuJLGGCe 4idIjJeRxISVY4c4Ga/Yz4kf8Ebvh7eaRcy/Cr4leJtF16KFms7LxfFZ6vo95MqkrFcXVjBDNZKx AG9UlxnO0ivwP8IeKtX8D+LPDvjHQbhrbWPDGs6frmmzbmAW7025juYQxU52F4wD6gmv7Ef2Y/2g vD37S/wk0P4maDaz6dNNJLpHiLSZ9pbS/EdhFAdStYnDHzrQvOjwucFo5VyAQa/tr6H3CPg54k5T xZwNx3w3hsz4rjU+uYStOdalip4GVKnSqxw9ajUpuLwtaKqON7tYhS5ZRjPl+54MweS5pRxmAzDD Rq4xPnhJuSm6dkmoyTXwSV/+3tmkz+S/xR8CviF8PfjNY/Bbxzokuk+K5fEek6OIP9ZbX8Gp3sMN rqOnXKjbeafLFJvjkXgjrggin/tNeI4Ne+N3j17V0Ol6HqaeEtHEZAjj0nwlaweH7BYsHGzyLAHj jLGv6c/2p/2arT4t/ED4DfEbSrS3j8UeAvGL295elAHudCm0+/v7KO6YDMkVtrVrA6DqBdPjrVf4 Q/8ABPP9m74ZWgvdd8E6b8SPGl5PJqOseKfGsA1U3Gp3Er3FwdO0mcm3sLPznOxTG74ALuSa97Hf Qu4vqZrxLwhw1mVHC8LTzOlioZjj5S5nhKOEvhKKpUKcpVq8KmOxVKrJRp0nLDKo5Q9pCBvU4Hxz rYrBYWrGOEdWM1VqN35FD3I2im3JOpNPZPlvdXSP5tvA2meGvgemi/Ez4kOmpeMNR0Ua98LfAGnN ZX1/ZXl3DL/Yfjbxzb3i+Tp2lQy+VcWdlIHnvGRJDGsSkt88eIvEes+LNd1bxN4ivX1PXddvrjU9 W1CRY45Lu9unMk8zRwIiICxOFRVVRgAADFf2K/GH4D/snz+G9f8AF3xf+GvwztND0+we51nxHqWl WWkz21tbW6xR7NTsxFN56wxRxwRxuXJVI41PC1/IF8TLrwTc/EHxlP8ADiyu9P8AAcniPVT4Qsr+ Z7i8t9A+1yDTUuJpPmkk+zCMktzzzkivx/6QvgzmXg3g+G8nlxJl+PyfHVK1SjhMPKtDHTqRhCNT H42lUjySU7KlSnGfJSV6NKH8WpPw+JMjq5HDC0JYqnUoVHJxhHmVRtJKVSomrO+yd7R+FLdvjS31 BzzjJJ9j9MfrQG9cnjuTjr3qDdyck9++fX/P+eE3ZweR68/TJHP/ANav5gUH1PlD0L4Y6fqus/EX wNpGh3FzZatqPivQbPTruzZlu7W5n1K3jjngcHiRC24Hp8vPFfoZ+0f8Q/CniDxJ8R/iH8CNFuoP iX4Y1lPD/jnxZPqEo8T6TpXh+AaB/wAJT4Q0e2/cWulXwgjW8uE8ya0lAKGGKZSPmr9iqDSbb4xX njTWohcWvwv+H/jr4i29s0rQtcar4e0C5fR1SYA+W41Oa2cHqDHwc4r550Tx54i8PeLT400a+ltt Ze/u72WR8TxXi38kj3tnfwy5W+s50lkSaOQFJUkYMCCa/XMhzl8LcB0KdVp0uMsyruc4QhPFYKGW 4enSoY3Byqe7Sr+1zDER5oOFScKMoRq0XKFWHs4ev9Uy+Kl8ONqyu0k5U1SjFRnBvaV6ktmm0rXj oypp8Oo+Jtds7NXuL/VNd1SC3EsjNPdXd9qN2se93c5llaabJJOSWyTmv0I0j9qTxh+yf8XvEfw1 0S4k8e/B3RLKDwD4r+HGuXZk0TxDBb6ctp4guLIK8i6bqT6hcagVlhypD7XVlJFeNeBdP8La14hX 40fDuaHw/rHgux1HxT4g+HKW/wDaFxp2u2FnNNYX/he1lDnUfC02oNGZFIaXTwxEm6ILKPB/BXiT QD4gv4vHVsbjSPE8pi1TWoUL6z4eupLr7RHrulSHJM0VwcyxEHzoS8fysVdebJcbmvAjy/MMjzv+ zc9zbHKrhs0pVL0Hg8PSnHkmnzc9HGV8TyYuhiqSjTWG5MRSlepGM0KlXLvZVKGI9liK1S8aqfu8 kVs11jOUrTjNactpR3R9ofHH9n3RfiD8PZf2nP2eb/xTr/w+tltLHxt4A8Ui5uvGfwsnRUt7Oyiu GTGu+Eo4xHFbXEX+qjRUcAKSPiHwrr134V8UeHvEVsXhvPD+uaZq8HJSSObTr6G6UEYyrb4sEfga /XX9iP8Aazj+Gvibw98A/jdq0Unga6ku7T4e/EJGB0S+0fXpiG0bXvPKw33hq5kbzIriUGfT7pSj ELvQfGP7TX7Lvir4Z/tOX3wr8OQf8JJH411ZfEXgMWciyS6j4f128mubRXeQhGniVbiN9rEHyNwP zCvsvETgfLcz4e4a8U+Am5Zji8XRwGe5fQounLLs8ko1KNSjhlWr1KVDH1FU+rxpyqUHUp82GlTh WjhMN6GY4GlVw2FzbLnepOcaeIpxjZ0sRo04xvJqNR35Um43V4tKXJH+h79qu3i+Lv7GfinxHpKf aJbjwV4d+JWkbB8yzaS+meJsrx8rrbR3IP0Ir6l+H2tx+JfAfgvxDE4dNc8KeH9WV1OQ32/SbS6J Bz/elNeJfA2O58afAq+8C+ItHm0gaZZa/wDDSSyuo4Y2m0mzsW0W3ulgjc+VC9u7BAwU4i3YwRW5 +y5pnijQPgZ4E8L+MtLvdI8Q+ErG78LXdrfpsnktdD1G7sdKvFGTugm0mKykjYHBWQGv9d+GZ1sV xhlXEvsZuHF/DWHhiKns5whHFZVi3NQnde5Oos2xHs4yd5RoTtfkZ+xYVyljaOJ5XbGYWKk7NJSp TvZ9m/bSte11F9tPlf8A4Kn+BrTxT+zOfEFxFM//AAgfjLQNbnktlRrmLSr+Z9G1Uwb+PM8u8gIz 8pMYzxX5afBT4QW/xI8M33gKbX7bxX+z3r07P4e+Jdzpwh8Q/B34jagtounaVqNtO4NpdX0qR2s1 rDJJa3ImW5R1MbMv9CP7QXw9X4q/BX4k/D7MSyeKPC2oafbSTYEUN4FW4s53LcKqXUMTE9gpNfz3 aH8aPF2nfGbwZ8AP2eT4T8M+C/AHiCz0S58RvDZSDxedIuYo/E3i/X7jUpWtp5rlkvRGEQO8LxQo WOyv5I+k1wvw/lHjDkfGHEOEnicp4twGEy36vhoSqYvMcbHEV6NTBul7WnSng5YOdF4uVRwqQlDD fVa9Cu4VI/IcUYXD0c5w+MxMOejjKcKXLFNzqTUmnC11FwcGue9mrR5ZRlZnm/8Awxtcf8+3jn/v 1oP/AMsKK/Tbz9U/6Cenf+C8f40V+VrwF8O9P+E2t/4FDy/6eeh5X9gZb/z6l+H+f9fn+VX7Vf7X y23i/wAR/C/RPAGi33gm80pj4pOq79N1fxTN4n0vTNe06e11rQVt7vStPt5JrMvCZJPthtcTMVIA +UfDnxY+A2mah4C1mL4S+LvA3iHwJrum63H4g8H+OI9abXmsdYh1JodasPEmnL0jWRIpYZUdYwsT B/vDjvj1qV54qtvhJ8TtSvpr/V/H/wAMtMXX7qaHymm8QeCdQv8AwTqF00igLM88WjWczFcfNMxI Ga+e/O75HfPPJr8V4w424hxXFWY47EVqGPpznGphfb4PCTdLC1fZ4rCxoydOdSgowdKbVKqn7Rzl KUpVKjl8jjsxxVTGVKk5RqJtShzU4Nxg7TgotpuGln7slrfW7d/tLxt8CtQ8W/F/4palpeteGvA3 wyi1tfFNp498c3raF4WbRfGT2uv6Ra6XcCBzrGqnT9WLpZ2okfbasGKcV+yf7Aur+EvGvwi0LwT4 Q1TWPEOj+DfFuq+A21PXrWzs7vVLd7xdSS7jsLWRxaaVLbaq/wBmjdmlEKASnduA/Cj40+JdW8Tf DX9nG+n1q51LRdM+HeqeFYbB5ZDaaVrvhnxNqFvqEYjbAF4+k3WgMzkFjGIwGKgAfpR/wRS8XLJ8 WfH3gC6kJt5NIsviBYxlsotxoPn6ZqLKOzmLUdOPv5HPQV+ueCmZ5Vl/jPlWUYLL1QpcXKUa1ec2 21jqVPMKNClTjL2dOjTlyUot+0q1GlKUqak6Ufc4fr0Kef0KEKdo47SUm9f3kVVjFJaRinaPVvdt bL5c/wCCnHi6TX/2xPiTo8cJtNL+H8Hh7wBodkoxFaaX4e0SyjhSBOiws8zuuOMSVq/8EzfFdvpP x71bQLlwh8XeBNWsrQsQoe90m7sdZSIA/ec2tveEd/kNbP8AwVT8EvpXx1034m28LLZfEvSp1vpg uEOv+G7g2k5dxx5j6TcaWeeT5TEdDX58fDL4hat8LviB4S+IOiEHUvCmuWWrRwlyiXkET7L2wmYf 8sriye4hb2mJxXwnFGZYrg/6QOc5/madRYPPauLm0rOWDxNZ1Y8i/wCwOslFLRaJW6edjK8sDxNX xNbVU8S5v/r3KV9P+4ctD+nXUfiJcyfHnwx8KdLkTyLb4feIvH3i8hVZ0hk1HTtB8K2Zc8w77qTV Z2xgsLeMcrkH4w/4Kg6tpdj8LPh3ZXVta3mo3njm9nsIJ5Jo3S3tvDmoQXd1E1vIrjy572wPXaW2 hwVJB2v2PvHtt8Yvip+0v+0RLHcWPh++n8LeEfDov1xPpnhrw9plxqc8MoVmCOIvss0oU4LyE8k1 +ev7cHxbt/izrvgvxFdyapYTyR61LoHhWa4tAnh74ey3Vsvh3VdU0tR59v4o1tYp9UPmlVXT57GJ VO3ef3zxH41o4zwn4ixvtliXxficRHARl8KwOGxtDCRqpSTXLOFGNaMPilUxDny8sarj9JmuYRnk uJqKXM8bOapJ7ezjUjBS7aqKkl3lfVJtfoj+xXqnh/xh4y8X/EPSrC7gv/FHwl+FK6tfu9tFbanq ukLqPh3Xp5rGKMtHq39u+Hr5ppTMVmimgcRI5dm/RUEAgnoCCfp3/SvzY/4J1WN74b0D4q+CbprX U7Hwr4l0K78N+JI7ZreXVvD/AIz0KLxFabVfJWzaMwXCJuZUlvpgOeT+kJc+gx781+p+EsasuA8m r14KGKxUsVUrpRUUsRLF1vrCXLdNKsp2nd86tK7vc9nJFzZbh5zX7ybm5WX2+eXNto/eT1677ni3 hHTNB+D3gXxp498WJbaTe6nf+J/iJ8QdWPmT3Ege9v72zgnkUM8/2XR2tLaGJAQrApEvzAV+Y/xP 8K+LPjj8Q/CngyfwbqPi3xcvh3xD8ZvFENr4in8IeDdXOvvE+iaLFqN5pTXL3Vr4UsfCmkow+zeT NPIkiwu8kh+tP2r/AImadrfivwF+zTYWy6rqfjbXvCev+NLNIpbgR+DdP106pNpZSBgVvbtNGkYK T80ShSMTZHwza/EbUfCnivxXqknii4+KOoeL5/H1l4yuLnXjH4V+HOm+ItC1QWfgqHTNLv3uNI8T yXFvZ2VzqcDS6ZAsUVtaSTyIXH5P4l5nk1arg+E3K/DeUVaOHxUqapS5sQpwxGKhOE6dWM6yTwrl Vhh6rp+3xjrqMHK/j5tVoOdPBX/2WjKMZtKOsrqU0007te421F25qjlZHz54Q8P6VBoXxOn+KnhG 6h0/4c6honiLTNNtkdme/m8QPoVz4Ai11Lp3j0e7a6tQ8gnlMMWkSSxN5zAt+hv7Efw31TX30H9o rxN4q1S01DVI/EVv4P8ABmka/faRpV3d6RdT6Sq2+hpdJCmg6fodl5UMBLxt9qMsx/coX+Lfhj8C W8Y6L8VtS+HniCK7+H2pfDOZpIPE7XGna/oviIyab4r8OaVNbLbeV4juS+j33kXVh5nmxRSNLFDJ mOv1d034L3Vxp3w6j8ReKGs/hN4I+H+jtZeDNBVNBn13xTdL5zT6lqpkj3wy2U9raxWiuvmXLtIW VmXP5/4UcJY6WYYDOquSfW8JlVJToJVaahXxX1+r7PGVcVFRVShgsLCUabjSqclS8FRb5qT8zJMF UdSniJ0OeFGKcfejaU/au03NWvGnBNK0XZ6KO8Tovil8fPBXw18Ia58U9Y046lpWt6xoGneFvEL6 xHrc3jTVbkv5kkNpHP5lv4d0iSymaSEyBZlsZTBGcxu/4ueOfBWmfEfxJ4y8V/D2407Ttdm1LVNa 1z4U6hqclx4h+1TMNRu774fXRgI8a6DcfaTc20Y8u+iikKNDKiCU/anizwh8Y/2jfh14x8LeKvh9 pfgvwzo2qN4j/Z71C317wpDpfhpNFtodHtvhz4kaw1R40OpaNOhtLhiT9sLbj5RUj5OsPhv4M0gP Y/EfX9d1j4g/Ce2lk8SeBfhtbw2mupo9vPFHY6ZJ4r1mWCOfVtM1G5X7RLpsF7JDYzgoXS0Lji8W cbnPF+Ky2ljcqS4XlSdWhVxNL+zav1pzq/W5QnUpxq83J+/w9JQxHt8HCNSrTq4rmnTnOqmIx06S nQ/2RxbjKa9lLnu+dq6Ur296MbT5qau1Keq9P0X9kTxz8V9K+Glz4bvdKtNDg8GeC7ObVb23lsr7 VZ9f1TVdb8TzWdow3TRaFDqP2a5kfAM0EcAG58L9KftIaroPhf4Xaz+zL4L8MeJdG8B+B9C0yTWP iWAtrog8VWLx6vHoesx3EaSa1BfTPAb64tTK0N1fwjy2ijcD2/xV4q8G/srfAPwrruupqEXjK48M w+DdBvkey1vxktzrktxrt1uuNQkhh1R7Ca8kurlyI45poFB2+agH5B+KNC8R/ErULzVtD+K3/C07 a2e6n0628Y+Ijo/j1Vug1zLax+FdevSLjUZJIioi0ya6jldU2YLKo5uL8Hk3hxk1fI8gy/65xlxZ gKEMzhCvSnVo4KpQaWDhTqReIpwqvWv7CnKq6WHo89eFSrGsGNhQyuhLD4enz47G04qqlJNxpuPw JO80pfa5U3yxjeSlLmPG4C0jIqK7yOyqsaKWd2dsIiKoJZycAAcknA5rSeK4tbia0uopbe5tpZLe 4t5ozFPBNC5jlglicAxyq6sGUjIKkEAivavB3wf8VaBZaB8TfEtpFpui2q+Ltfs9HuWnj8RzTfD+ xmv5JbzSJIFex0460mmwNJIQT9rUqpDA14U11NdTTXE8jS3FxNLcTzOxZ5J5XMssjk/ednYsfdq/ kvM8jxeV4XC1cww9TCYjGvmp06keV+xdOlUhVafvctVVouGiTim+qPk6lGdKEHUi4SqapPT3bRad t7Pm09DYs42uri3tUdUa6uIbZXk3BI2nlWJXfYrEIC4JIBOBwCeK9K+KmqQ6l4816K1gt7ew0KS0 8KadDbg+Wun+FLODw/bSGRlDzySDT2ld3+djMc4GAMr4Q21hqPxQ+H+n6tZRajpmoeLdDsb+yldk SS0vb+G3nYyR/NGyRyNIGH3TEG7Vl+Lr4X/i7xVfrerqK3niTW7lb5YBbJerPqV1ItylsHYQxyBt yoCdoYDJrB0pUuGqtZTjy47HQg4/b/2ahN31+y/raty3TavPlap8ztbCt3/iVErdfci/w9/z87aX +qPAmgWM/wCx18YtX1y+1S1sk+I/hS50e3s7GO7Fzqmm2EtnENzyqLWzkuNYjjuJyMItptXfIQtf GbN6dR+XfI59/wCVfdK2N4vwV+O3wx037Rrmj/CzQvh3rF1Ppt2LO1bxTda9fX/inW5Y51Ml1p8C X/2Y2+QHGjxyjaw5+EiQ3KkEcjcpyDjGenvmvp+PcNDDYTgTDQocjwuUOjUn7z58RRzPMaeJXO26 c4U60Z04Ok7OKTfxI6swioQwEVGzjR5W+rlGrUU+rTSldK2liNmPv9c479vX/wCvXtnwZ/aS+NH7 P2oyaj8LPHGpeHormZJtQ0Vil9oGqMmADqGjXYaGdsYG/aHAGAwrxBj1zkevJI9cgdun619rfDj9 hP4x+Kf+EM8W+K9Ki8N/CbxJolp4vk8bpewahaz+HjLE02nWi6e0jQeIpLYzeXBKqbdjOx+XB5eA sq46zDPKOJ4ApY+Oc5a4T+s4B1qc8JGc1TVWriKTj9Xo80lGdWpONNJ2k7OxGApY+pXjLLlUVelZ 81PmTgm7c0pL4Y3dm20u5+nnwJ/4KAfEz42fCD4z618T9L0nwBo3w78HvexfFLwXHdDWX8RNJCiW mi6DeySRT6strKXyjiONrmPzFCsCPmm5/wCCyXxg0/VriHQfAHhTVPC9vBFaaUfFkt/L4luFt1Mf 9oate6TcQxNdzAK7xpGVQkgO5ya8a8Jap4u8f+Bf2jPDfw+8DeINI+FPhD4a3mk+APDOn6feXtu0 j+MNCn1bXNR1cwAa54nu7C1muLiYuxEKrHEoiQA/nl4b8K+JvGer2+geEfD2seJdbvDtttL0TTrn Ur6Y9CVt7WNmAHckADHJFf0txd49eMmXZZwHhMh4zzDFY/GYavCrmCoL2mZ16OPxFCMaUJUuWpQp K0aMpUViq8HTq4q0nTpUfpcbxDndOll8MPj6s6k4yTqKOtWUako2ScdYrZe6pyTTnrZR+lf2nP20 /jP+1Pc6dF45v7LRfDGkZfT/AAZ4ZF3Z6CtyxLNf30c87vqV9ghVklZgirhAozn5k13wv4j8MjST 4h0XUtGGvaVba7ox1G1ktv7T0a8Li01Sz8wDz7KQxuEkHyttOOld546+BHxl+GNvYX3xG+GfjLwX p2o3UVnZ6j4h0S9sbGW4lOVgW5kj2ecUyQmdxCkgcGvq79trwRJpugfCfxhf+KBqF3b6Np/wt0zw 6kJt7fStC8C+FfDsn9oWkcoEhjudW1a/YkhV4BXJY4/GM4yvjLi6jxzxfxvicwxPE2RrAVK/15ez quniqkqSlUhiOSpGnCMIRo06MLe/G0VCLa8OtSxuNjmGNx8qk8Vh/ZuXtNJWk2veUrNJJJRUV12s fnruA6k5AyeP58cdRTQ3GSfwxz+fSm9++PTPoOnPUemfSkyc9TxyOf51+Wcr26/1/W55B9ffs9Wp 8PeEP2ifE8rJqFmnwGvbEz6ZIsiadf8AirxFo2lWdnqUskQNtd8TFo1JLKMbiCcea/Av9nb4t/tF +J08LfC3wvd6zNCYjqusz/6HoGhQOyr9p1fVZV8u2Xk7U5kcjCIxr7G/4Jw/COw/aF/4Xp8Dta1T U9C0LxV4a8Ja1qusaPbxTXyQeHfE8Ex0+KS4/dw+eJz8zZx5OVViMH+lv4PfBr4e/AnwRpngD4ba DbaHoWmxr5jKqPqGq3m0LNqesX2wPf6hIwJaR+mdqBUAUf3F4K/Rrr+M+RcE55mmZPKeBMro4yOI 9i4vGYjGf2livaYehzKSpU/YxoTniKsZWc+SlTm+aUPvci4XlnmHwFerU9jl1KM+bla55T9rK8Y3 vZcqi3J97JPdfmD+z5/wSJ8F/D270bxZ8TviN4j1/wAX6fJHdpY+Cp28N6JZXAAJh+3yRvdajFyy uCIUdSVKlSRX2Xc/sAfsgXt5d6he/A/wtdXl9M1xdTSS6snmTycyyrDb6ikcJZssQiKuWJCjpX2L TXdI0aSR1REBZ3dgqKoGSzMxwoA7mv8ARLh3wK8IeFsqp5RlvAOW1sHTfO3jMPDHVJVOXldWdTGK vLnlFWk04q2iSikl+l4bh/JsJRVGll1KUFr78VUbdrXbnzO9v6sfHet/sHfs16n4YtfC+meBk8L2 +lXc+oeH7/RLqR9R8PX1yQ1xPpU2ri6EMcjqjPEytEWjDBFf5q534nfscaP4x8O/C7UtS17WfFfx I+CL3Fz4W8aXyWcOueINLs0uLuw8O6+kKrFekXItkilUJsaIMVAd8fVd/wDFX4YaVK0Gp/EfwJp8 ysVaG98XaBazKw4KtFNqCsDnsRXS6R4h0DxBaR3+g65o+t2MzFIbzSdSstRtZXXO5I7izmdHcbTk A5GDnpXVW8OvCvNI47LsNkWW0p4ulRpVaWEVKkuXDVadbDTlh6DjT9phqtKnKhVlTdSjy8lOcYSl F3LLcpqqpThQpRc1GLULL4WpRfLFpXhJJxdrx2TSbR+Ln/BLLxbqfhHx98Y/hH8SNd1vSviPr+r3 HiH/AIV/4o0zU7bUreTSDIL7V7bUbxilwJoLtg8QCkC0WRS6k7f06+FyeJdA+KPxr8L+IfEVnqum ajruleOPA2nS6zDd6zpOg61psVtq1lLpjN51jpUWt2kgt2I8s+cwU8Yrr/Fnwg8FeKvGPhT4jT6T bWfxB8FXTTaD4rtI1t9T+xzQyW19ompTxAHUdGntZpUaGTdsLCSIqwO7yjx94Z1jRP2nvg18TtIt idH1zwv4u+GXji4WOcxxW7iHX/Cs108MbBD/AGtFcRRvJhQZNpZdwr4zg3grO/CrhXhrIsVinxBg uE86jTwmJoyrU6lbLM3qSw1SWPozlWUquExOOnXrRhJYf2dGlXp+y5ZUo8WCwNfKcJhcPKf1iGEr pQlFyTdKs+VupFuWsJVHJpPltFSVrcq+oL21ivrO7spl3Q3ltPayqSQGiuInikUkdMq5r8O/Cn/B L3Qpfii2v6trt7pulad43S7HhzQdRXVo20+Cf7dFHqMlwlvfaak8hQgmN1iRGzIysklfubXyB+0R 8KviJqOreFvir8F/EUGh/EXwC2pajq+ltpMV5b/ELw28ERudBlgLqj60YbCK3tpHYNi4Kb0U17Hj P4ecMcY4PIs74g4RlxjU4Qr+2p4WlOMK8qVWpQWIdLmlD20qcKarfVnUpxxCpOnzc7gntneXYXGQ w9fEYN414OXMoppSs3HmtdrmaS5uW65uW172Pgj/AIRHwL/0M9n/AODBv/jtFfMn/DTXxp/6Nx1X /wAJyX/5Eor+Iv8AXvgH/oEr/wDhmzPy8v6ufEf2jl/8kv8AwRW8v6/4Y/HSyuNT8dfA3UtMMs9/ efBbXE13Trc/ObLwH43mjsddWMdRZ2viyDS5iOQh16RuhOPDDN9PXjv7da9o/Z1kub3x7J4SZZ10 f4m+H/EHwy1K5Fs0lrFc+KNPf+wHlkxsSRPEtrosiBmUnZx1rxW6hjslNvO9xFqtre3NnqNlNEFS I28hjJikHIYOjo6thgwyvAr+Wsyw7xeW5Pmck/ack8LUlJ6zlhfZqm1fdRw1ahSiu1GVvhZ+dVVK dHD1nvZwk315OXlt6QlGKX90+g9ElTxF+zV4404wrPf/AA5+JfhfxXbTFAZrPQvGmmX3hvWBG/UW zatpehFxggM6twSM/pD/AMEbPBOt2fxa+IHxS1O0fTfDVj8H/Fdpo+pXkkdsusXU2p6bY3Z02F23 3trbzKqTTKvlRyssZcyHaPgT9j2/0DWPibrvwx8SaTYar4Z+LnhTVvDS6FqmpzadbXviPSpI/FHg ixk1eErLAJNf0m2tmZCrut6wHJFftD8IfDei+El/aXvrrxL4N0PXPBv7GNl4W8RWngTUbLUF0nVt DvZ7+6u9G8MWLGPwtp8V60VjFBczLc3c8RuZIxl5H/f/AAV4ep4ziDgzjiVRVo8Ne2ozp39m3icH SxWJpSnUlHl5I4V0FTV4uThLmlBQhCr9Rw7hvaYnL8xc1L6nzRa2vOmpzjdtWsoONle7s7tJJSr/ APBQf4YP8Rv2dvEGqWVsbjXfhzeQ+OdPEab5nsbNJLXxHAmBnadHuJ5iB1NgvHFfzfed7g8enX3+ tf1rfD/xNpPxX+F3hTxS0Md5pPjzwZp17e2kyq8ckWs6Wseq2E6EYysst3C6kcFGBr+Xn4+/C+++ C3xe8cfDm7WUW+hazM+izyAj7b4b1D/TtBvFY8Pu02aBXI482N16rgdP0lOGqVfE8Pcd5fH2uCzi jDD1pxWjmo+1w1Rvq6tCUorsqEV1K4uwqlPC5lQV6deKjJ20btzQk/8AFFtf9uo/T39lXWp/BP7A nxd8V6dK8Go3fjTUbaOeGJZZUlvbjwj4ejZYWUiYiK7fCkENnGOcV+XXxj1HVL74sfEm61u6N3qk vjbxKt3OZo7kFodVuoIYY5YSUMUVvHFGip8iJCEUBVAH6ofsQanpV9+xt8QrHWoIb3SNC+LOnT6x a3DTLG+mS6l4I1Gcg2o82OVVSV42QqweEfMBk1+aPjj4b+NPE3xI+K2o6D4X1C28P6f428cXUmsa vImkaFb29vrOsTpbjXtceC3uryRLWZYYUkeaaQBERmNfI8fYHF43gTwwp4HnxVGWW0EsPTU5ONSn PGe1qyhFOPvOXKpaNckk7p3XBmcKs8ryVUrzTox9xJvVOpzSsl+O+jvofsb/AMEwdZ1LXfgv4qn1 WZbubSvGFv4csbx1/wBLOj6VodlNp1hcTdZ4bYX88cG75kiYRZ2IgX9HdR1Cy0jT77VdTuI7TTtM s7m/v7qU7Y7aztIXnuZ3bsqwxuT9K/NL/glgoPwD8VzBkJm+JmqEgMpddmg6Cq+Yg5QkZIz1HI4r 3P8Abx1+88O/srfFG6sLyWwub+20LRBcQO0cph1fxFpdpdQI6kEeZaNPG2OqyMvev6k4CzWWR+DG U53VTxEsqyqvinGT1n7JVqqi3v73Ko387n2uWYn6tw9h8RL33RoSm135VKVr/h1Pl3xl4R8Q+Pfi H8X/AIzaadN8P+Ibr4SajYaBHeTS2qabe6bqXjX4dPq91dCORoZjo8ENzCkLPI08kWFA24+M/hj8 FZvC3jK++JHhnx74UvvDfwtZNav7bUdQ0b+2dfsdOhig1y01HTLu9j0/RLW7u3vLe2tNRvPtNxH8 0dvP5cjD6ltLjTpf2XdN1P4n+L/Cngnw58RPC/h3RbrRvE1lc2lx4gsfD+s6nq0s+kaLBci7Pilt cuXju9Qjtii2rLcJHNI0deVeGPCvwt+LOuaVbfBDQ5te8DeHNama/tvHfm2Phb4X2EUhfT54vBFn cwP8Qtc1GKG9uI9U1W+Yxqrpc28EVvtP4Jn+V4LM8wyDGRw0KubYpf2hGk8W6eMqYvGVJ1fbww9G M5KnGKoV6tRwSajTTVPDU61dfNYmlSrVsLNRUq8/3qi6nLUlUqScuZQim+X4ZSdv5doKUj7E/Zn8 XeBrvwxFe+Eray1nSbn4hapb6VHrulafolj8G5NN8Pz3d3Z6xrEE8MWu25XWLxrE2cIhhjvLmECJ CzL1X7V/xOsvAfwh8K6j4oEbeLvFaWPhyw8XL4auNY8LaN4i0PU7XW7zVP8AhENQnjDaebvShPay bZLgRwQPGk6ptP5t6x8YNDs/Avis/EBJbnXviV8TviLeXa+B7LQZjf8AhEW+h6S+n6R4iWcWGjaW dW062E0tpbXMl8uj+QXFu8vmeo/tOaxJ44/Yp/Zp8ZWR1GawtPEur6XfS6nqLarqMM4ttWsLVNVv /KiW+vj/AGa4klESLu4REU4r1Fx7KPBHFWU5c6U8flWUrExUVKPuVMThaM5Sw6c5UZKjWVSLeInO hzyhQdKjSpHRHM/+E/G0KVnVoUOe2q0c6cXeP2Xyyuvfbje0bRSPhLxj8SfHHji+WTxR4tv9bjsJ Zk0+O326XotspuZJzPpeiafb29vYeZMxkytvHISwL/MOPt74IavoP7QXiXwX4k+IfheD/hJvg9f2 niX4nfFJ5PsWgax8KvDWkz/Y/wDhNreOVP7Q8W/2lZWFnbTxEPcxI/2hZQjA/EXwj+GfiX4xeP8A w98PvCkDS6prl4EmuTGz22k6ZERJqWs3xUfu7O3tt7sT95tqL8zqK/RH9tjxd4O+Dngvwx+yx8K7 SysPJ0jRLz4latZQQw6nqttYCS50TS9ZvIR5lzcXF9Nc6jcJIxCCaFAAkhFfhfBtHMaeWcQ8e8QY x1+HcsqUIzo4le3/ALVzCEva4TC05VudxlSaU6+IjerRws6sYO1WR4GXqoqWKzLFT58LScbxn73t qqd4QTlezi9ZS3jByS3Z4D+1b8cYvj94k0vxpp/iCVNAtZ9X0LRPh7dI8d74Xs9Plt/J8QS7F8m4 XWIZElLA+dA9o9s4McUcj/LUbcqw+8CGVlGGVwQQVb+HBHGPzrJjbPTjPIH49fbitSyj8+4t4AQG uJ4YFZ87QZZUiBbH8OWyfbpX5PxJnWP4nzvG53mUva5jmc1KrJOVpVOWMbxUpPkT5bxhFqnTVoU4 wpxjFeViMRUxdeeIqvmq1XeT7uyWl27LyWi2SSSS/RHX/Gtn4e/Zs8D2/jE3nia+1rwvbaTp9pPd S22u3Fxq+tS+Jbyx1HxCytcJ4Ij8N6Z4NDW9qyyzO/kvJGGLj4z8U+LdQ8Y6rHqt/ZaNp32fTtO0 ix07QNLg0nSrHTdKtUtLO2gtoSWdhEoLyyvJNK7FpJGJr6Q/a5Wyg8T/AA98A+FluLzT/C3g68a3 srKJrlIQuq3+lubVIYzI9rFpvhm2BZwzJHBukc8tXyFGwGMHOBz9D2Fe/wCJ+Y4/+13kEq3tMJkl DCYRzWvtqmGoQvKdV3lUcJ1ZxinLlStJRjKTv25pVqe3+rOV4YeNOF19pwir3lu7NtLWy3sm2e6/ Aa20+b4gR6jq1teXWm+GvDHjLxXcLYzfZ3ifw/4Y1O+tZZJfJcpD9tS2QlQG3SqVOQAcb4V+Hp/F nxA8JaNBErQy61Y3WovLg2tno9hcJfapeX00uEhsYrCCYySSFUVRlyBVX4ayPE3jq7SYRJbfDTxa sincDOt+lnpQhUL94+Zfox3cARk5yBX2T8GfgD4v1H4TWviv4c6Nc6p41+L+j3ngezvtQUwaL4W0 CXV9Vj8ca5qLXlsUhs5dDs9GsrWVBI0z6lcNbgspxycJ8N43iZZDgMFl88bHLJ4zMcRCjDnr1qSq YKgqNOMYuUp1atOnQpKV4qpWcpOMLtGCw08V7CnCm6ipOdWSirylG9OPKkk3dtKMel5anWeCdT8Z Xngz43/GfwVoPiGw8UfFvWvB/gvwhf3K6Bf6brviXU/FrLrel6Ho9vYLANNhjthAGuVkUwsfN3Mz tXzDP8WLK41C40zxx8Cvhz4u8aJqFxot9qVpbar4c1K6VVk02ewTSfB93DZPrSXCjyLyC33o0YPl ysQ1fb/w6m/Zz/Z28L+N/hX8SvjtceMdV1oiy1fRPDena5JYeCb5La6tL4+HJraCX+z9f33tyJLp HSVfKUbFYNn481n43+Cvh8b7S/2bfCFz4WeeSVLn4o+M2tfEHxFvoMgIuimeA2/hC3PLBoEN2xOW lRsiv0biuCynKOFqmacZ4PAYvD0MQsyy2NTA5zXhjZ4zEYmrOOX0qdTBxxNWeIb9viMRh3RoxjRn VnWhL2np4z91Qwjq46nCcYyVWknTryVRzlOVqSTp87cn70pRcYpRbct/S9c+En7PPgXTLXxd4+i8 Q+DfEMGh6tr8PwA8ReL4dT8TeIZJYtPPha3vdV0bR0l8MWE1xLemS3utt5JbIkgKYcV+1v8AwTg+ Mtj8ef2d73QNV0Dw/o//AAgWu3PhUeGNCt5rbSdO8OTwpe6BDbJNcPKWWN7lDM0nmO8JckMTX8tW qapqWt6hd6trOo3urapfzNcX2pajcz3t7dzt96W5url2eV8ADLE4AAHAAr7a/YV/bIuv2UPHWoR6 xph1n4c+OJdNtvGFtAManphs3kW01vSxuCyXEK3M3mQtxMhIBVgpH0XgJ435BwZ4r5ZiMVl2G4W4 HzWjXwOPnChCVSr7WEVQxWNdKnGKjCvSoudLDUqWFownWnCg5yqTn1cPZ9hsDm9Kc6UcJgKsZU6j UVd8ySjOpZJaSSbjBKCTk1G92fur+2H+zzoCfs+fG/Xfh7ba7pnii48CzPPZWOv6w+najbaRf2Gq MRpUt40NvdRWljMEeBI2ZGZH37uLv/BPr9mHw/8As/8AwQ8Navc6Tbf8LK8f6TZeJPF2tzQRtqNv FqcK3enaBb3DLut7KCzlhLopUPM7s4O1cfX3hrxT4M+Lfge38QeE9Z03xR4Q8WaVMlvqFlIlza3F re25imt7iPOYZ1WUrLDIFdGyrqDVjxb4z8E/DDwxP4i8aeItG8I+GNGtUSbUtXvIbG0iht4gkcMA c5nm8tAEiiV5GxhVJ4r/AE/peHvBFLjbDeLNOOEp08DlDw+GqR9jHB0YVa9TFVswpzVqMJ1aVTke Ii0nTlUk5Pnk3+qxyzL44+GcRUIxp0HGLVlCKcnN1E9k3F25uzbvqfkD/wAFi/iPbQaF8FPhDHOG uPEHi4eMNYtgw3rpulyJpWnlh/AHub2+wT/zxJr4l/4KCaZfazo82r299aalaeAPirf+FNShtnil OgWmu+CfC114UsTcBt1zvsdJvA4AxDLbMjHJBPmX7UXxlsf2t/2zdF1HwjLc6l4QuPEfg/wN4MSd GtJLvTLfUbaGW6SGYg24ub6a7lG7B2yLkBs16Hr1kPH3xF/bl+BEmq2c3iPWNYuPGPgSxs7abUBr PiL4Z311cXWkaS5XdDfSeGnv13YDObbYMg4P+eniJxlT8TuJvGCeBmsblPE2YYTKMrr06i5Ks8my vMq+EjSbajVWOxlGl7KN3zfWrRXPOm1+bZnjY5ris7dN89HF1IUKUk9JOhSqygo9Je0nFWS359NW mflhz/kdcelHYknHQgY5x3PTpxSyKYmaOVSjozI8bAh0dG2sjKRwwYEEex9KidxtOPTt+Hr3r+KU ntbU+CP6qP8Agk98E7H4cfs22Xj+5s418T/Fy9n1+6u2QfaE8PWE81hoVirsMrD+6u5yBwxugTna K/USvnH9kGSwm/Zf+BEmmFDZt8M/C4QxgBfNXT41uun8X2pZt3+1mvdNRSz1mPU/D/26eCV7JEvz p1yba/tbXUVuIY2iuIzvs5nWKcpIuHXy9yEHBH+//hRkmX8K+F3AmTZXTgqGHyrBuKi1FVq1bDxx Fapf+atWnUqyer95vWx/RmT0KeEynL6NFLljRp26c0pRUm/WUm2/U+M/2i/2ydG+HkereCvg9d/D /wCIHxis7j+z7jw3rXjrQ/D1l4cuZIt6y6ob68iN/cJnm2hkDKy4leMjafyQ/aT8E/8ABRb45arZ 615PibWvBuqeE9G1iPQ/AHiqxHheyuJdLhfVrdbHR9T/AH0xukuSA3mllOEZhXY/tO/8EvLDRfjN 4Ik+HV/4muPAvxc8SL4fu7u/uZ9YvvA/iu7mN9Jd6vfNC82o6HdWMN/5ckhWSO4AEspUAv8Aqp4k 8H/Bj4c/By9+HHhfW9O0rVfhh4W0PQrK++0yz+INOlvbq20rSrnUEgmSS7F1qUsaPtbAaXaCm1cf zBxBkXiR4wY/xAyfxOrYrgTh/hiUFhsPlmcUaOFxko06uJhCn7TAOeLVTBv21atWq+zU1CMaOHcK sKXymJw+aZ1VzKjm0p5dhsJbljSrRUJ2TlZXp3neHvNydr292Nml/KZ4f+FOvarq89p4zm1fwfbw eJbPwpdavq2g63f2w8Q3kskaaWZ44tovcRuwRnBdVLDKgkftFr/hpf2HvgJ8L9IPxX0zw7qdh4xl 8SeJdIvtB1nV5vGviWW3iuLyCxn0v95pUGk2I0yGCaKQRm6u7gSswHln9PfBXwt8Ua1pnhDSPizo HgTxBpuh6Nomu3d7NZ3dzrafEu0uFmlvbVb5XWe0htEtYhcTvJOxjeP5kJY5n7RX7K/gj422R1XV r7xRp/iHS9Ev9M0m60HU/KtYLm+uvtcd7PoFzFJaanKLx23IyrujkZVO8IR4nB30Xsx4E4b4nzvh nELMuMMfhqVLA1sbHFYGvh4urGviozhQxnJOf7ulCk6dSjCqoVYV5So1Z0zHA8J1MBhcVXwkvaY2 pGKpuop05RXMpTuoz1eiSs4p2kpNxbRwH7LH7dfww/aOsLXT7XXLfQ/HNpFs1Lwtq7QW11e7AV+0 2J3KJULDIkiymGxLFEcY+7Li3juo4t6KwSRJgrBX6A5UEZ5IJGQefXFfmR+zp+wdoPw+1G58S/EY /D/xXqGh6lb6j4Q8XaB4Sm8MeJZY7WFvt0msrFeIkN1DeBgDHG29VDFuStff/g7x/wCFvFV3f6V4 a1aHXDozmDUbqzmF7BbXJJMcE95Eoj+0FEkLRqWZCuHwa/qHwnzXjurwxluG8VI4TDcQ4tyhRVOc Y1sTGno5VcPGdWlGraPPJ4atVo1IWqrlUrH1eT1cweEpRzdQjiZ/DZpSkl1cU2r6XfLJxa106+hV +fP7UX7f3wf/AGafGcvgvxBoni3xJ46sNJ07VrbTtKtIYNKjt9VJZd+pXNyqm4a1ViT5ThcBQQc1 9/QrMktx5s6ypJIJLdNqq8EXlojREr/rF81XYMef3mCcAV/PR/wV/wDAnhlvjN8KfEVlqkcHifxh pUfh/X7KeVVjtbCxvYYNI1dkxuS3IvLuN2+6fsfHzA14P0leNeMPD/wrzDingqrhsPm+BxeEpzli qcKtqNeo6HNRpzlySrqtOhOHOppQU5ODcdMOJ8djcuympi8DKMK1OcE3NJ+7J8uiejldxa30u7aH mv8Aw8m0/wD6EDU//A61/wAKK+Zf+GXLH/ofPDH/AIN//tNFf5nLjr6RWn/ChT/8F4Dy/u+p+X/2 jxJ/z9j/AOA0/wDLzPyi0rW9R0S+sdQ02/urGfT9RsdUtpYJpYxFe6dcx3VrdbI3GZY5YkZTjIKj GK+jP2vfB6eEfjdr19ZW8MGgePtN0D4i+HZrS3NtY3dh4u0i01S6ltY8kADVpNQDDqGHIFeMWvh7 wPr8NnHo3jX+wNZu7i7SXR/G1mbLR7SFZJnsyvjHT2lhk3WqxK5ntLUecxAITBr7K/aI8HeMPH3w 8/Yk07Q3tPHvizXPhzrXgy1uPC9x/atndSaN4ggt7C1l1BF2L9ls50juZX2xxfZnZ2CLk8OV5LXx vC/EuHVL61VwssvxWHdGcKzcnX+pzoqMJSlGVT6/Tm48qlzUoxkk7I8KjQlUweMilzyg6U4crUrv m9m42TbTftU7WveKTseE/s4Xnh7wn4l174yeKNKvddsPgxpmmeL9I0SFmgstb8Y3Ou2GleFdM1W+ QF7Oz+13E11uRSWbSwjYVjn9Y/2dfDun2nif/goBrXhVJj4Q+MP7KWpfF7wNfZMkV1Y67J/a+o2s dwq4e4stefUbWZM7onttj4yM/kH8RfFOgeD/AAg3wM8Etb6jFa6/BrXxN8cxlifGHjHSYbmxt9H0 Tp5fgrSXuLxLVmAe8uJJbxgqGJR+k/8AwSK+INz4s134v/s6axGNRTxN8FPid/wr6aV83GlXusaf AniLQIGkYY0q8MVld+XnbHc2DOuDM9fpPhNicDR4t4c4NqSg61SddqtCKf8AwpYnCYzCTw7qpOU6 c6FenQvC9P61Qg6d6c51ZexkVSnHH4TL205ScveS/wCX06dSm4827ThKMdLrnguX3W5P60/4J8/F HQviB8BNP0rS1kg1fwVqF5p/iayMbJZWep61eXutqmkKUVYtKZbh3ihTcluHMIZgleB/8FRPgc/i HwjoXxz0GyMmp+CxH4f8Z+QmZJ/Ct9cltL1OUAZcWWqztG5/hi1TcSFj48D/AOCbfxGuvhX8b/HX wE8Z2E+hX/jC5uLS2s9Qs7mHU7Pxn4TN2f7JvRK4W1ik0kajt+Tc80cY3Mrrj9x9f0LSPFGh6x4a 1+xh1LQ9f0280jV9PnUNDeafqED211A4PTMUjYI5VgGGCAa/c+FcFhvFDwchkGYSjTzDDUpYGp7v K8NjMFJfVpSj8UWoKhKolbmjOcUkpWX0eCUc64fjhatlVjF0m7WcKlN+42t1Zcjl3Ta0Pxj/AOCX 19aeKvC/x8+FGoeXLbalD4X8Rx2s7uqTKzXWm3eQhyEEltpu4ryNw718YeOPG/jb42fFDxd8NfH/ AIw8UalJf/EjW4/A9ndSJc6N4b18a1c6d5Z0q5mhFlpT6RF5BWDY0bxRTFWCSB/rX9nPwLrf7I37 e0Xwv1uSaTw14+0fX9G8I6zOGSDXtDv1Os+G7nePle/ivdI+x3CZylxuH3XUn5c+N2meOfhz+118 XvBnw505NX8T+K/Gd5baBay+HtN13VJG8YS23iGyOiR6lbTCw1FJdQUJdxBJIliL70G41+E5xSx+ G8O+E8rzGnXo1OHc3xuT5jh6d5Tq3csVh6TpxnD2nu1aqoSu0nL2kHdq/wA1iPawynA0aylF4TEV MPWgr3lf34Rtdc2kmodm7rWx+qP/AATG8L+K/CfwU8Y2vinw/q3h+W7+JOoz2EWr2c1lJeQW+j6T Y3NxbRzqDNai8tpoxKBsdom2EgE19SftN6v430b4P63qXw68JeHPGvjGDUvD66Ro/iewTVdOt5p9 Xtrca5FpU3yX97YNKlzGrfKggaZsrEQeo+CPgjUPhv8ACP4eeCNYvZtR1rw94W0uy1u+nnNzLcay 0AuNTZrhuZ1S8mljRySWSBTk15N+1r8Qbv4W+FPhr45tIby5Gh/GbwfNqNrZxNN9q0GbTPElv4lj uFVgRAnh+XU5s8gPaoWG0Ej+osLldPhPwtw+W4jE1sHDAZcoVaq5Pb4d1VepOPuuEqmHdWXKrWk4 JJ3dz7SnTjgsljh5zlT9nSSctOaPMtXtbmjd201sj8yf22fC3xH1bx38G/gzDZTeNfGmneG7XxD4 h8dnTEga/wDF3jXU2GqqdTKLBofhK2vLMypCWit7dLjeQqIu2hb/ABG8B/D22WC51zRPEGmwX+s/ C3RP7AS4n8K20msaDqF14+8fa7cRpbt4+1mfxLc6DJMyMltp9lqgsbW4njEqj6N/bS8cXdldaf8A BDwwl14f1v40eEde1aXxHHf3F3camlj4i1fU/Dvhf+1FjM13BrKm/tjbIEW3Or21sC8Jevyn+Llx ceHj4c+EnkWsdt8MdPli1CX+zIrPU7jxj4ngsdZ8YC+ueZJ4ra++zWECM2xI9HDqoMrV/LHiDiaf C/EvEeY5dVljMTKeHpOdVSnClVjCn7HAe9KNSq4YRfWK2IqpqdaFJKCrw9qfGZpUWCxmMrUX7Sbc Itu7SklHlpatOVqfvynLeSjpzLmK/wARYhaN4ORoWtbi98G2Wv3ttC3laXb3fiHVNX1NhomnRAQ6 TpJtJbMxQwKEx8/LOa/Vz4v+BZdC/wCCcvwm8KWti97rt7f/AA81O105I2e/n1rxhqF/fC3s7Xbv lunOrNGigAnaeeMV+cXiXwTLq/xO0Hww1xBc3NjovwctjapcxzyX2haj4e8KwXgtdrFWubf7cHkt wPMETzOVxE2P6UPFOjeAtEg07xh4xn0zS9F+Hy2uq219rFxFa6Rocml2N7pOn37+cRFA0EGq3ixE glZblGX5kSu/wm4Medw8UvbVIYGFfBwyp1allGjTqymsRXf2b0lhIzcW4qTd3OMXzHRkeB+sLOOZ qmpU1Q5n9mMm1KV9rx5E7Oyb6pan55eH4PB//BPL4AW3iHXNO0/Vf2g/iNZMiWEkouJFvNomj0wy Lhrbw1pkc1s16UI+1XeUVjuQr+f/AIi+PPhf4ytf3nx38ERzeL7gxzQfFD4Y22n6B4rna3UQW2m+ ItEv5Tp2t6atqQiyKtvdRi3jHmuM4439pj4veJvjN8YPFHiXxE0UMGnX1z4f8OaVZ3kF/p+j6Bpd 1NHZwWl3au0V40pLTyzoSs0lyWUlAgHhsR4xzyAfX69T9K/J+OvEKdXFw4Z4ZpQwvAvD8XhcNg61 GE4YlwvGpjcVCcbyxVefPUVVclWkpe5KE5VJS8nMMzcprCYSKp5dhVyQpyimpW3qTTXxyd3zaSjf Szbv614i8K+CoLCXWfBPxEs9dsIkt/N0PxJpd14Z8aQzS7Vkij02M3NnqVvGzD99b3pyoYtGmMGX 4Y+HrnxF8QfAejeU8cWseJ9IjWaWCRoGtINRik1CdeP38cdvFOX25C7CDivMIznv6enTJyPpmvsn 9liwuNeutfEesaSb/wADaP4o8UaFpetNPCunT6j4T1jRm8QafeQl2lgTWJ9DhubCK3me4kvLecDM DGvz3I8HhuIOJ8qwsMFDBQrVablSpSm4SVOaqVbe2qynG9GM7JTm+ZJJJP3eDDQjicXRgoKmpSjd K7TSacvibesU+r12NX9oX4z399q1n4d8E2MPg7w9e+F9K1O7uLAt/wAJPrtr4ttJfEM2ma94gIEt 3pSHWrgRW8Qhh23DLIsnGPnTwd4R8TePPEGneFfB2iX3iDX9Ucx2WmafF5k0m0ZklkZmCW9uiZLy yMqIOWYV9uaz8LdN+Pfxa8X+CPAvgzxfqXiHS7Hwv4eXxbrWp2+ieAfhZpGjadpltJnTLS1efWJ/ JjuY44Jp42mmndkgRV3D2nxd8R/hh+wnpY8DfCLwjJ4t+KOtW4fXvHPi60u4rGWCAGKWS2vI44xf W63ySL9hsnWCIxt9omeUYP6BmnBGIz7N824q4y4khlnA2W4idGeLp06jlJwqyprA5bhVTVOdaSpp t0ebD0VNTrTdWM6S9epgJYmtWxmNxSpZfSm4uaTu2m17OlC1nLTdXjG95PmvEu/D79l74cfs+6Rf /EL4268mr6/N4B1e5m+DcF3pt1PeReVF/a1ikltL5mvoZUtlQokcMbTlZGk2ZPj37Vf7S3xEHxBH gjwH4j1X4e+FPCWj6HZt4e8KXsWkpDrU9jFqF9bXz6UQUuLI3cVk9vv2RS6fL8gZjR8GLjxt4x+M vjr9oD4xWcU/h3RPhxqHijxJqcFhNe6DZLq2i2UvhPQ7KwtHcC6WN7G5+wK+8Im+42+YzH41+IXi fTPF/i3Vda0bSn0nTpnSK3huWWTUr1ogwudY1udc+frl7dtPc3RBKrLcmNCURTV8acVYfJ+AsPl3 BeEnwVlua46pClTU6kc0xuFwbnGeMxddJSVLE15xXsIShQo1sPVpUoVP3koXjcZGjl8aeBg8BSrV HZXaq1IQunUnLR2lJr3U1FOLUU9Weu23xm0vx9AuhfHjSn8QW5UNa/EjwxpekWfxP0m4gheO3N7e FIofGOmtnE1vfYmOBJHcqy85d98GV160bVPg34oT4q2sMLXGpeHbPSbvRviDoVuoy9xqPhO4eQ39 ihKq9zYTXMasw3hFINfsn8FP+CWvwA+Jnwf+FXj6/wDEXji31XxL4Ii1fxGlpqduLK41jVNOLW0l rDNY7rGKzvWy0ZLiYRbWZc7q/HrRND8Z/Bn4lWOr/Yda0vw3eeKfEPgHT/GNzaXul6dq1hJdS+H9 WutI1gPEFuoba4S4EkMymJ40beAK5eMvC/jbhLAcJZl4nZXQzPKuL4RnQzPCYiVbMKNBwwdT2mIq R/dzjD63Tp3xtKtJvnpU61NeykzG5TjsHTwVXNaUatHGpONWEnKrGNoO8ns0udL94pPdKSXKzwW1 sb3Ur610yytLi81G+uobG0sbeIvdXN5cTLBBbRRAZadp3VQvXJwa6Pxn4a0/w5q1j4e07UG1rWra wto/Exs3t7vTrbxJO7vcaNpE1oCbsWsbwW87ksGvIZxEWiCE/S2qWmhWXha2+IGiW2qyftCWU3ih NQsrmCwgstV0nStV1HTbv4u6Tonllp9cSOOaN4o9yLPbzX6xOLZ3Pl3ws8DX2h6p4d+KnjtJfC3g LQ2fxbp95qGo2mh6p42u9ELXum6F4NivFeXUb261G3hj85YXgjQSM7hgoP5o+D54erhcsgvrlfMv ZV54uKbo4LAy9nJzrWfLSrxc/wDaoym40VCEIzn7a68l4NxcKS991bSc18NOm7O8uikr++m7Rskm +Y9d/ZE+MnxQ+AHiqXxxFr3irRPhxoN9YQ+IfDM93cWOg+JtX1m9h0qz0qXTr0hLuWGO5uL6cQIZ o4tNy5VWBri/2wfiN8XvG3xs8Z6H8R/Guv8Ai1NG8RXlt4bsbiVo9Kh0e8lFzoj6To9sFghSWxuL VlKJubzOpzX9Vdv4G+D37Q/wv8H634u+HfhDxNofi3w3pfiS3t9R0ixuHtZde021ubmS2vYYUkt7 vLBWliZHJiHPAA+MvEX7BXhSX9sz4QfEu3003vw60LwVcT6jpmoP9tT/AISfwOlpY+Ere7kuCTdQ /YriwYeZkuNHO/OST/c3Ev0XfEPDcBZBwhw5x5PiThLHZll1SNpYmjGnSx0pUsRiauD9pUpSwtGN TB1acI1Z+z9lXqqMZV5s+9xXCeZwy7DYPDZg8VgqlWk18cbKp7spOF3HkScGld2tJ6OTPkb9g3/g mn40ttV8KfG/4y3MHhi0t3s9b8N+A5dOhvtfuAksN5p+parLcHboDkxxvGqBrkL94R7q9M/bUm/Z d/Zs/aO+DPjPUvBHizR/GuoT3njB/EngHUdOt1u7648TMmqXPjCw1KNpNbFxFLdxllmjZIpCFBCh a/bYYJ5/z2A4r+ev/gr/APAn4veJ/G2k/GjRtNXXPAPhfwrBolzaaSs9xrXhy0srp7q/8Q61aiPF to8uoXyxRygnJhywAwa/V/ErwuyTwT8C8TS8POGFnub5VjsBjKmKxWHjjsR7SjVp1K+PkpprDqEK SivqqpqipKS2lUPYzbKaGQ8PSjlmE+s16M6c3OcVUleMk5VGn8KSj9i3Lf1Z4JrH7C+meIPGfxo0 zwZqE/xV+I1lZ694z0L4b+Eb2DTLLwj4b1yc3vhbVvFviTUB5V/qctpe2zwaRZ5mkY7ZpYwGU/mJ 458FeLvhx4n1XwX450HUPDXijRJlg1bRNTiEV7YyyRJNGsqKxAzFNGykEghgQSK/oj/Yd8WfE4+I /C3jnwp4A8L6l4J+Knwg8GX/AMSfiJ4l1D+w7nQdf8Bz3fgu6srDVEt3GoSzRadbXBsH2ZYmYyoM k/C3/BRzwr8FviX8d/Clr+z/AOLLr4l/G74j+JtQ0z4gabZ3s17bW+ryPZaZ4f0q03W8dvpvk+VN EYo3k2pEHkfHX+XPEzwj4XxHhrl/H/C8P7IzirmEqay+pelHHYXGVubCzy9V4SxWZYyVPEYSdVYe rLDU4/WIU6VF0lTfyGa5NhJ5VSzHCL2Fd1WvZv3faQnK8HT5lzVZtSg3ytwS5klG1j9Hv+CQv7Qm m/ED4GT/AAb1S/jHi74TXM4srSWTE174N1W5e6sbmBW5kW2vprqCTGdokh/vV6x4Z+LHiDwl+1Tq +t618Ovi5YeA/jbo1jo0mvX+jS3HhTwxr/gK81PSbW+vCB5mh6fcafEZC75jeO/jmA618bf8E+PA Nj+xTL8TfE37SPhq8+GerfadH8Ian458QLDc+G9Pl1K5gu9GsNK1exWRBY3lvL5k825ow9ogJjAO f1P+LGt/EH4k/D2w139l74yfDHQru2v4tR1HxL4gtbTxX4T1DQI4pPtVq93aPItg+/YTIOihgxXg j+y/CutxHjPCLgGhneY1cLxp4fr239l0KNGeZVMNhalXBUKWIwmNrYSUW8D9YwtR+0pRd5SVR1aT g/uMoliqmTZdHEVXDHZb73sYxi6rjBuEVKFSUGn7Pmg9Und63VjR8H+PPGF74+8UfD/xpocjWOnG HxF4Q+IFu9nb6NrkN/qF3caVotraxZJmttNS0V7hmIneRkIViFr5u+BfwVi+GHxL+L3iDxzf3XxH 8T+O/HGgafpEU1zL4ivWtTF/b8l7r1pc2yxaNollq0weGRYxHF9hWNJZXCg/Uvw8uPEOo6F4d1LV fFfhb4hIbLThe3PhHS7Y6JJqUP206rqWhX6HElk13HaiOPPH2RiCXbaPSbG80fUdUN5BALW5lj+y w3jQLbz6vBayTExCcoGntY5VnKxk9dzbcFSf2Knw3hs9nw1muYYupicZk2IxGIwbxSpzlGli6M6T hNUqk6NeVGlVUKVacqk9udzlOSn7kcLDEfVa1WTnUoSlOHPZtKaas7Nxk4ppKTbfe97PoZJ3t7dp 5Y5pmVFzDawmWR3AIbyo+pJPYngLzjmua8aaJp3iLw5e2mratqehaW0KXN3eabqD6PeQRwyJO5e9 DAwDam09NucgggEOt77w5Hqeo3kNz5+pxmG01AKZZrm15C29pNZRfNag4BTfGN+7cjNkmptT8UeG 7Z7OxvdQsXudRvv7OtNLlkQ39/dCIzSW9rpzDzLyRIss6qhChWzgjFfeYirhMRhMRSxVWl7CopU+ WU04y5m4Lmd4t8zaTgtneKlfU9GUqcoSU5RcXpq7rsr7b9vxPKLTx6s3jK5gsNUtvEPh6zGkaMdC 0nTprfxB4RuL3T57m41bV9TvL9Ydc0CSyijcG3jlkR23qzKrmux8K6HpFnqt1qPhtdPsdPuGzLpm j2ul2WjX0k80s8mui3sYkkXXGLeXcNLkssa4xk1keKr3RIZ7y+vYLSxd7vT9Os57q4stMv5rpoLu 2tmsJdRCILhoJbuKGNGMrLjajM22tDwH4UuNEaW/h1fxBf2Wr3K3i2fiJbfz9LgjtRHb2dtGkCva x5b5lLvlwcgc183goYj+06dGry5h7KtVq+0g5RlQjOTjDlVSc6nJLlinCM5QXKuSMKSVNctPm9qo ytVtJu605b7btu2ysnbTRKOh6c9vG9xDckuJYUljXa5CMk3ll1kQcPzGhGehHHU18X/ti/sWeDf2 stD0t7zU5PDHjnw4kkXh7xNBBHMotbieJ7mw1OEJvurMIJ3iVXXZLJu6FgftevCv2h/C/hbxv8J/ EWm+K9a8caFoUBjv7vUPh41/H4tVtNd5Ps2nQ2FrLNdCRlKvEIysiHDEJk1v4hZBkfEfB3EOUZ/k lDiDLcTh51J4TEVvq1OrKilODeJtJ4aUJQjKOIim6TSmth5jh6GKwWJo4ihHEUpxbcJS5U+XVe9r y2aVpLZ6n89n/Duub/oqcf8A4DQf/JlFeW/bvAv/ADx+Pn/hP2v/AMh0V/kV9W8Jf+jfUP8Aw+4r y/6df1c/HFDJ9P8AhOX/AIUT8vLy/E/EsOeMY79sYwcY6dP8a+7Ph78TfFemfsO/FvQvD2qtYXnh 74q+F7WW9tQqa1pvg34gafcR63Y6ZqEf7/TNPvNZ0K0S5MbIsolMTH58H4K3H1PQD8q+kv2er2Of Sfj34RvrYXeleJ/gn4iu5VMgRrPVvCGo6V4i0HU4cxsHkhvLZ12/KSlwwDL38fhDFVcJmtelQryw 8syweNwvNFtPmrYaoqV3HWyrKm32SurWPncBUlTryjGbh7anUhdX+1B22/vWPnfzD+PfPOc9yc1+ gn/BLjxkng/9uP4IyTy+RaeJNV1XwbdlmKo8fibRr7TY42PGAbiWH8cV+eIY4HOMgf5/z6V6R8Hf FWpeCfiz8NfF+ktjU/Dnjnwvq9nligM1nrNnKqFwCVVgCCQDgN0PSseD8z/sHizhnO1d/wBk4/CY hpbtUa9Ocl81Fr5k5fX+rY/B4jf2FWnP/wABkm/wR+ifx5S/uPjx8TvijoFnBoPxt/ZS+IlvL448 N2K3kzfEPwJ4W8SwabpfxAsW3s66xbaabW21xGLJJbyRXSkAyKP3d8OeIdN8V+H9C8U6LMlzpHiP R9N1zTJ0OVksdWs4b61bIPXyZ0B9CuO1fhv/AMFDPFF98Df+Ckfizx94PVRLrNr4M8Ta9otztbTd csfF/hjTv+Ep8N6pGYyt1pd9aSTxS70PMokC71XH6b/Cfx3oHhH4eeFdB8OeE72y0C30xbzRtMuf ExvjounatLJq1voVtdSaGrzafZrfG3tt43LBbxoSdua/sXw8zDD5Vxr4kZTiMQqU8Fj69PEe5O1W rRxVWnh8XFQi4qeIw79nil7r9ph6dW05V6jh+hZRWhh8xzihOVpQqyU9H70ozahUVla8oaT2d4KW rk7dp8dPgppvxc07wxqlrJBpPxC+G/iTTvGXw68TNHltP1jTLy3u5tIv3Qb5NAv4rcQXSDJTck6A vGA3mnjf4K6Y37R3gP4q6FpcsXi7x0INJ8ba08qPB4Z8I+B9Hl1O9h0NY4cw6vrN4dE0u5ui29bG CWODZ58hr1lfjFExx/wjUg4z/wAhtf8A5TUf8Ldty4Y+GGLqpCudZjLKrkbwrHRsqCUTODztGelf omY4PhTMa9TFVJxhiqtfCV5zVKpd1MJJqFS3s7Kq6E6mHdVfvFSlFKSdOm4+xVp4GvJzdlUlKnNu z+Knez2+Lkbhzb8rVtVG3tPnRCRIS6iWRXkjjLKHeOMqJHRM5KKZIwcDjeoPUV5h8aPBOk+P/h9q +ha3Fby6ZHJa6lfrcD5X0yxmD63bI/nRiKS40F9VtRIzBY/txc524r8zP20/2svif8KvH3w78RfD V9N0KWPwp4h0m8stZtYvElnejW9UsLiW6MMsVusM8a6DbIh2swEr/MAdtfV/wU+P2s/F34C+F9V8 Y6Yy6/4y8ManYa5q/h/UYtFInup9S0iXUNKtP7KmXTpxCqvGN0ipIueRxXl/6/cMZ7m3EfBdSNSW KwVCTnz0m6FalOFJaSV5qXPW5WpU4pKLlzbHL/aeDxWKxeXcsnOnFt3Xuyi1HZ7p3lbVLa9zwX4R zeDfiX8KPhz43+KS6hqmufsu+Ndf0LUdJtNZ06Sz8SeItIigh+HcUmqSEN4g1d1Ok2lkYJxbyXkU 8kpZAxb8ePG/jaf4lfFbXvGmpWs08PiXxnc6imk6jcl5IdNv9aee20W4u7cKSqWkywPIvPBZT0r9 R/D+peCtfms/grovhHVvDHgK11rxT8IYrKDxjPqN8NS+Hn2f4k+H/iV9tuNFT/isBrNxqETts8s2 180S7VVRXyH4y8BfDbw58a/h58L/AA54UubSxuhpmp+J9e1TXZtY13XLnT9W1yWeKxc2cNv4etLg aTCsiwW7ybWwZWAIb+WfEHDYvNsm4dpYfF4apQwVWhQxdblqqpjMwjSw2HpX56EZThSwzpR9pV5I ylKvU9nGUuR/H5pCdfD4RRqQcYOMJytK9SraEI7wTajFxV5WT952TdjvNC+Et/44/a3h8PaZPJaf EIfFGz8V6jpGjKB4W8BfDvQpY9Smg1PVcF7nXF0yLS7eO3hUwxmdYpZpJZGSP9Nv247zSvEHw41v wnrVxDpnh3T4LbWbrUdQ8ZWnhPSdX8UefGug+E70Jpt1eXax2txNqr+VGkBbT7eGRy8qhfnz/gnv baH4Q8F+Kfijc6TJrfjD4j6/fpd6hLeJatpmlWN4839l2rPZzvKst/PJNNIXUuY4l2AR5b4s/as/ aT+MXjb4k/E/wNfeM9Vs/h/a+Jr7SbLwbZPbwaVFpumyGC3t7l4LZJL53ILzNI2JZCCUAVAvtPN8 l4K8Ls1zDFQqTx/iRWqzVClGNSMKMoVZYeOInUdOEvaRl7TETpJ39p7KNGMIWXXGth8vyWtWqJut m8pPliuZKLTcFNyaTve83Fa35eVJWXzyNB8B6Sw/tLxxNr7LsBtPBeg3mxvkVpEOreJls44wHJTe lvNyu4KV6781z8GLi2sEs9I+Jul3Q1KU6lcSa34Y1qI6P5cQgSztv7Is9uoiTzixd/LwFAPORxug wWbeFPGlzPaRT3kCeG4bG5kAMlh9o1hzdSQZHEkkNusROR8jsO9UtGtoLu8ht7gTeXL5uTBIkbjZ FKy4aSFx/rApPHIBHBIYfyxWxXsY0I0cBhYQx0b8rpyqNWqygk51pTnF/u7t05JOMrPW9vkea3Ko 04JVFfZv7TVryba26NbkhMIkk8nzPI8x/JM21ZRCHPlmXZ8vmlNu7acZzjiv0v8A2Fv2cvFvii61 T4l69AuifD3UfDWtaFa6xM5j1KW5i1LQb6a4s7CdF36a9lbXKC7JeH5ZAPmUV3Xwg/Zo+D/wz8MR fFHxloV/8V9WtdDXXbHRNcv7XSfDFtPHbJdBX0uDTLg30gYgK1xJJGuM+STXqfwb/aV8Q/HDTDc6 7o0Ph3TtM8Qa2NH0LwlqMmk6Vb6NpOkPDZ6Nfw/Y3OpRbtRLO+YVY26BYUAGP2rw/wDDfK8gz/I8 w42x6eZ4yM6+CyygqklJRcE6mLxSg6UKaVSyo0XUqTvdzpOOv0eV5VSw2Kw9TMKn76onKnSjd3tb Wc0uVLX4Ytt33jYwviR+2N4X8LaP8RvCP7OEFjp9r4a0s6ne/EqdbWdNY8S6pr2lafFHo8F9Azaw 62t1qKrc3AJKWKiBRFEHbw34L/Abxl8c9N1D4lftCa3rGm/DiydfEcvjfxTqFzba7c6TC0kurPpO oXySJH4dlWLZIjrEqtIk9huYOr2fhN8Nfh74N8Y3Ol3/AIcfxjBr3xk1bwtokHiK9jm03QbLwJb3 99bXd/pkNkqeJtQlN24H2gx20TRpIbaZlArP/bH+Pvjb4g+IPGvw4sJk8JfD3wCdEim8M6ayzDxP f3D25jvtWvUhgKRQCVBBbJH5CLEMqzYYdOdZjUx2Xvi/xFxf9o0crlUwuC4bwSnTy+WIarYmCrtq FKGGpYWNKpNwdXE1Vy3q+1i6S1rVnOl9ezSftY0rwp4Wmmqbk+aS5toqChyt2vN6a82h6b4w/bx8 GeErqD4efB34Y6Dq3wg061/sjUxrZvdLvPE0EcENilxpT2p8zTlW2t4xHdXKzXM7KsjrHtUV5Brv jv8AZA+JFmg1Pw78V/h74jmngul1XRNP8N+Jrhp4rOOxTSJrgXVvJrsUjxQOLi5iW5aQMZJGd2Y/ BiuSQD7jPt1xWhY6hd6dcLdWcnlTok0aS7EdkWeF4JCm9SEfy5G2sBuQ4ZSGAI/Gsy8WOJ87q1aW fUMBmuV1HanhKuBoOhhaWiVLCez9lXo04RVoRjXT5vfcvaOU34tXOcXiHJYiNOtRe0HTjywXaFuW UUlt7/ne+p/UZ+xv+0rdfEKWT4Ix+O72+k+GHhzTzruseO9B8M+CdeTSLSEWv9gR6Pa3kxurizt4 oo7y4AX7PwHctzXzN/wUB/as/Zo8YQ2vwQ174deM9Ti8Aa/a6tb6h4buNE8OW7u8Lu9loMs/mH+w ryFj593HCj/Iixruckfn3+zLb6N4LvPhn8Vm0+51zX5fF13FrdpqGpytpPiDQpJ0srnQNTsZoJUn tZkmZ5XcOzOinGBg+i/8FOvEOh+LvivoGv6R4SsPCU8GjNoN7Dp9wk0epLYwWN/a3kwisbdY5lTV HiwqHKwqSxPT+os88YuK8x+jxmMMTiMH/aGHxGDw9Whi6VXMli8oxkVPC0oSxUJ06M8PyU/bOpUr VK0qPOpxbgl9dXzvGVeGqsZzh7WMqcZRmnV56NRJwSc01Fxsr3cm2r32P1h/Zx/Z2/Zj/aL+E3hv 432HgySPxlrF5c3emeINZ1aXWNf8HXmi3L6fp+kx29vdi0jtrWGANFBJE+4T+dL5juxPxb/wU/8A 2QrCDxv4N8W/B+K61LxX4p0yW11T4dpqtk9zLZaNGsA1zwrp2oX0cjoXaFLiysozGjt5yRoGKj3D 9gv9tFl+BNl4Qb4UaBZD4d2sWkpe+H9ZOixa8sECv/aGoWJ0OfZqkpJM8wlfzXJbavSv0N+EqeC/ jrNofx+1/wADaXB4z0Yan4d8LzXlw2tS+HNIkNrLcRWM89tFGLqS5EjmdbeOUCUoGC9f3rLuEvDH xr8J+HuGMqo5fS4k4iwuX4rGYzD4CrgKsK+FlTjj8ZD/AGZU54m9SvSUZuUa/tFGU/ZRjOH0NPA5 Vn2T4bCUI01i8VGnOc403TalBxVSovds56tK9+a9m7JNfOn/AATa+Luqar8F/D/wY+Iuia34R+JH w2tpdKttO8QaddWQ17wwk80umXmnXcimK4ubdGkgngDiaMQI5Ta2R+g/inVbjQNB1PXbXSLjXLnR 7C9v4dJtHSK81BobaSRbO0llG2O4ldURS3y5kAbAr+T3/godbar8E/2vviXp/wAO/FvjHw/Hr/8A ZfinU30/xDeadv1TxLax6tqC28WleQkFkLmT93HtYqF5djXk3hf/AIKBftieEYbG20747eMbyy05 UjgtNclstcjaCN9/kzSapaSyTKckZdmYKcA4AA+LyP6VuW+GMMX4XcZ5Hj8ZjuBJ1cohmOEnha86 kMFN4ajUqUazw8HUhShBykpNVHG0oXcpy8/D8ZUspjUyjHYepUqZc3RVWDhJtU3yxcoy5E2kk21v tbqf1oWt94m+Nvwi0bVNDvvFvwS1Xxhp9tc3i3ulWUnjHw7aTswubO3S+jaG11FogvlXPlyBVkDq u7GPw/1+f9q/4h/B7432vhHXvEXxNv8A4UfGPxX4H8eNqF2z2PxN+GS2b3uoXN/LNJEjwWd1oeTH ZyKYhfuiDDYP6FfsgfGT4ufGbxx4ys/FnjKFvBlp4B+Gvi/T/DsGhWUWraff+O9DS+vrK38U28kc jaZDdpK0Ub2zuEkEfmhV+b9ALXwl4b0rw5d+FtM0XTrDQrmzv4LjTbS1itrW5XUI5Fv3uI7cJ50s /mSGZyd8hkJZsnNf0FjeGKXjTkWT5zhOIMxyXBrC5hgMRUU/YVcdUjbDwrQw9KvVwmHgsVSqV3J0 faVKbeHnSVKpJL6WphFnuHoV44mrQgoVacmnyuo/gUlGMnCK505X5bte60otn4c/szfHbxT8KP2V PD8Ph7wf4T17xbN4n/4WLd/CK8tNSh+wfBnxJ4gl8O3mtabLqF5LJdGHWrSO7kch0S3YSt8u5x8b +A/iF8EfhD/wUHvPjF8TTqL/AA51rXNY8WeCPFXhu1lj0bTNc1CWSD+0o7a2R/7a0C11AanaM0BY FoxMoZV2nxjW/jF43+Gn7RXxg+ITXtt4l13wP4kk+HOk2eoWq23h1PBc2q3eg3XhuPQ4XaO30VvD 9rJZpArERJcM6kyANX2XoVt8N/DPxa1f4L+I/h3B408F+B9H8PfHb4Qi91n7Fq/w61HxHpVp4q1D wg1/LpV0vijwobu6K/Z7qJFJjEhUlnV/4zwvEuK4lo8GZZQzGjgqvhtmeCo4NZhhpYjDLE4R4qnh qtWlh1KShmEMHjFXo0qlSGFr4bAewlTp1q9Wj8HDFzxccBSjWjCWVVYRh7WDlFShzKMnGGtqqhPm im1CUKfK0pSlH9xLiD4F/ti/DUWbG1+I3wuvtU0zUp2RdR0/T9T1HRrlbu2s7iOeGCeaJJFiaVcK rKyruYEgesH4feBIPBsvgNfCugWngX+zm02fwxb6fa2Ogf2WI9slvJZW6pH5Hlr8+R83JYk5NeJD W/Fd7ZabrfhPV9L8F6fd+ELO7t9BtPDllf2VvM97pnzzMZ4FuGS2a6ii2RQqguclW2KK/JvT/wBs v4t/tQXvx3+FOt3aeCdK0zxDbaf4c1XwhcXFlquj6ZDJfWElrNMmw6pLLc20NxJJIyjcpjWNYzgf 3HxD4icM8JVMtee5RHMuLeKsPUw1GrRwlKlSzFYahUxPsHUqVcRWw+F99qFLFTqKMq92pfvZR/Qc TmeEwLpfWKCq43FxcIuMElV5YuXLdylKMNbJTbtzerX7naPp1noph8I+EdC03QPCukeHozp66ZbW 9jpSXF080Vpp9lbWcYEMUUEbTOVXn7RHjuTzvi74bX2vH4ftonirU/C83gfxjp3iSZdNYi18RaVH 58WqeG9UhZi0lpPDIjBixIkhViOTXnvhbx5qHgj4LQ+IdQW48TzeEPAkZnW6vRZXGtTeHmgsRcz3 a2swtp7iGePzT5cgDQAgckV5h+yv+0N4x+O3jXX5Nft7HTNDi+HfhLxhpWhWa+cNNv8AxFrXiO2k jOovGkl2senWVtFllVXZWk8tC20fWVOI+G62J4c4bxsakcw4mgp4fD04yhGhSpKNZL2tJwhThSdG MYqnJylKC93kbb7ZYrCuWFwtRP2uMV4xStyxVpLVWSSsrWbba7HqH7RXif4ffAnQtS/aa8Q+F9X1 nXvBWjr4cQeHbn7NqGpaf4i1axsobW6t5ZkgvvKupVaFp1cxea4TG/j03w1qdl8QfBWk+L7TwZf6 FqeoaN9p0zT/ABnpcGka/pZ1CFZ3SWSIyvZFmcMWjcBjhuO35gftd/G7U/i/8afEf7D2q6Dp+l+E dY8FX/iP/hNbK7vJPEFp4g0TTz4n0S8isWKwSWkNzpwjkgZv3y3DN5kZVQPjT9mf9rj9oaH446Z4 c8ffEjVfHvg/4daOuhW3hfybTw1YazBe61p3ha2udTksIZXlurZJ0njdzIxMAj3AEtX43nHjrw/k HiNismeFq4rhjM8R/Zbnh8LQh7HPcNVvmmIxUqnJiakKODqYF0p0aeIjVdKcYpzSv4lbiDD4fNJ0 ORzwlaXsrxhFcuIi/wB9KblaTSg6dnFS5mnbXf8ASXxHpKWXwu+H/gz43a2/hf4iXfxG8QDwBp/i PxNe63apr8z30eh6oviPR9Ld7x7W3vRd6atyCsMjRpI7+Wor76+HmiNoXhnSbBruW/FppWm2o1Ca e4nk1KSG0jF1qUjTkZlnuNzs21dzEsPlIqvpuh6R4ltrC51XTLC6t7GeHUtKtZrcTNp07SC4CxXM rFmiEqxNtwq7olOAoCj0EAKAqgKqgBVAAAAGAAB0GK/b+EuE4ZRjK2YutHE05YfC4ehUlFrEzp0K Sg5YqopKnVm2rwlTo0FGChH2ceV83u4PBqhOVXmU04wjFte+1FJe+9m7rS0Y2VlZWKF5qEVlPZQy qcXkxhEhZVSIkBYy5YgEtK8aAZyS/AOMVz2ok2Fve2EMWqX06xz61Yj7TJG1xJDcCZ9PhvI33jaz rtQhf3eFDHBI4v4m/D/SPiQV0DXLnUbSF20+TT7/AEa9n0/UtKvLG+ttVtr62lEjRvcLe2sDAtEf lTZnBJPo1xbTLHpMj3IluYXisbmd4QPtkM+2G5LRo48p3MYcbSQrHoQMV9FKtjcRicxpzwyp4Sgo KjWU4ylJyvGvCVJwShyJU6kJOVRT52ny8nLLqvOc6icLQjZRd0276SVmtLaNPW9+lrP8Z/8AhNfE X/QBH/gf/wDdFFe2/wDCh/g1/wBATxp/4Xb/APyhor+Mv9UuNf8AoY4T/wAKJ+X/AFLPU+J+qY3/ AJ+x/wDAn/8AKj//2Q== "
+ x="0"
+ height="253" />
+ </pattern>
+ <filter
+ id="filter16257"
+ inkscape:collect="always">
+ <feGaussianBlur
+ stdDeviation="0.41431294"
+ id="feGaussianBlur16259"
+ inkscape:collect="always" />
+ </filter>
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient17245"
+ id="linearGradient27074"
+ gradientUnits="userSpaceOnUse"
+ x1="136.5"
+ y1="161.5"
+ x2="313.74622"
+ y2="285.25275" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4451"
+ id="linearGradient27076"
+ gradientUnits="userSpaceOnUse"
+ x1="155.34465"
+ y1="112.46042"
+ x2="136.51547"
+ y2="2.1517708" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient26774"
+ id="linearGradient27078"
+ gradientUnits="userSpaceOnUse"
+ x1="280.27875"
+ y1="261.40704"
+ x2="322.26389"
+ y2="275.19568" />
+ <filter
+ inkscape:collect="always"
+ x="-0.086395349"
+ width="1.1727907"
+ y="-0.11145"
+ height="1.2229"
+ id="filter3497">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="11.145"
+ id="feGaussianBlur3499" />
+ </filter>
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient3460"
+ id="radialGradient3466"
+ cx="167.48819"
+ cy="192.38739"
+ fx="167.48819"
+ fy="192.38739"
+ r="105.62836"
+ gradientTransform="matrix(0.8393229,-0.4383343,0.2966517,0.5680291,-30.16055,165.27307)"
+ gradientUnits="userSpaceOnUse" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient26774"
+ id="linearGradient2490"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(1.0228007,0,0,1.0228007,-6.1273429,-1.9735657)"
+ x1="280.27875"
+ y1="261.40704"
+ x2="322.26389"
+ y2="275.19568" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4451"
+ id="linearGradient2500"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(1.0228007,0,0,1.0228007,-6.1273429,-1.9735657)"
+ x1="159.38791"
+ y1="126.94874"
+ x2="138.87404"
+ y2="12.596838" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient17245"
+ id="linearGradient2777"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(1.0228007,0,0,1.0228007,-6.1273429,-1.9735657)"
+ x1="136.5"
+ y1="161.5"
+ x2="313.74622"
+ y2="285.25275" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient3757"
+ id="radialGradient3763"
+ cx="170.31175"
+ cy="209.16652"
+ fx="170.31175"
+ fy="209.16652"
+ r="104.54334"
+ gradientTransform="matrix(1.0743517,-0.8811517,0.8948667,1.0910737,-193.89727,134.77199)"
+ gradientUnits="userSpaceOnUse" />
+ </defs>
+ <metadata
+ id="metadata7">
+ <rdf:RDF>
+ <cc:Work
+ rdf:about="">
+ <dc:format>image/svg+xml</dc:format>
+ <dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+ </cc:Work>
+ </rdf:RDF>
+ </metadata>
+ <g
+ inkscape:label="Layer 1"
+ id="layer1"
+ inkscape:groupmode="layer">
+ <g
+ id="g2491">
+ <path
+ transform="matrix(0.9747328,0,0,0.9747328,8.1232897,4.8258519)"
+ inkscape:export-ydpi="98"
+ inkscape:export-xdpi="98"
+ sodipodi:nodetypes="cccccc"
+ id="path2486"
+ d="M 183,323 L 53,296 L 0.99999999,150 L 196,96 L 255,237 L 183,323 z "
+ style="fill:#1a1a1a;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3497)" />
+ <path
+ id="path5140"
+ sodipodi:nodetypes="ccccc"
+ d="M 103.94986,273.26347 L 112.82679,278.13224 L 130.15293,266.67465 L 121.4575,262.08933 L 103.94986,273.26347 z "
+ style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path5128"
+ sodipodi:nodetypes="ccccc"
+ d="M 156.01098,239.64164 L 164.60219,243.86025 L 180.14702,233.7166 L 171.54021,229.64474 L 156.01098,239.64164 z "
+ style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path5132"
+ sodipodi:nodetypes="ccccc"
+ d="M 171.60139,229.6086 L 180.08668,233.62387 L 195.07741,223.67266 L 186.68482,219.84353 L 171.60139,229.6086 z "
+ style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path5130"
+ sodipodi:nodetypes="ccccc"
+ d="M 186.53932,219.8472 L 195.14618,223.77328 L 207.96039,215.29699 L 199.53214,211.5709 L 186.53932,219.8472 z "
+ style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path5134"
+ sodipodi:nodetypes="ccccc"
+ d="M 199.53942,211.55443 L 208.00833,215.29699 L 219.61158,207.48873 L 211.43624,203.97858 L 199.53942,211.55443 z "
+ style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path5136"
+ sodipodi:nodetypes="ccccc"
+ d="M 211.48298,203.99346 L 219.48498,207.43045 L 231.12889,200.02493 L 223.45622,196.26063 L 211.48298,203.99346 z "
+ style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2172"
+ sodipodi:nodetypes="ccccc"
+ d="M 68.307573,278.59889 L 233.3461,375.01483 L 393.09703,219.55258 L 250.10479,166.11978 L 68.307573,278.59889 z "
+ style="fill:#000000;fill-rule:evenodd;stroke:#333333;stroke-width:0.81824058;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+ <path
+ sodipodi:nodetypes="cccccc"
+ id="path16273"
+ d="M 277.69986,176.50516 C 177.30035,235.42715 239.60255,221.94517 101.71421,297.5792 L 189.47945,349.38523 C 273.26264,323.79193 366.41421,274.97725 355.07543,205.22753 L 295.56691,183.1214 L 277.69986,176.50516 z "
+ style="fill:url(#linearGradient2777);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+ <path
+ id="path2174"
+ sodipodi:nodetypes="ccccc"
+ d="M 68.171626,278.57262 L 68.303363,291.78988 L 232.57786,391.18452 C 235.83055,389.43142 237.23238,379.0975 233.63174,375.00319 L 68.171626,278.57262 z "
+ style="fill:#000000;fill-rule:evenodd;stroke:#333333;stroke-width:0.81824058;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+ <path
+ id="path2176"
+ sodipodi:nodetypes="ccccc"
+ d="M 393.07972,219.62716 C 394.063,222.66073 395.10956,229.26471 392.24335,231.97585 L 232.84133,390.92104 C 237.0608,386.09241 235.76133,380.47536 233.63174,374.73973 L 393.07972,219.62716 z "
+ style="fill:#000000;fill-rule:evenodd;stroke:#333333;stroke-width:0.81824058;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+ <path
+ d="M 34.974214,77.099241 C 34.974214,77.099241 63.429139,279.82741 65.53691,277.66987 C 67.644683,275.51232 249.44002,164.63325 249.44002,164.63325 L 249.96698,8.789858 L 34.974214,77.099241 z "
+ sodipodi:nodetypes="csccc"
+ id="path2178"
+ style="fill:#1a1a1a;fill-rule:evenodd;stroke:#333333;stroke-width:0.81824058;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+ <path
+ inkscape:export-ydpi="98"
+ inkscape:export-xdpi="98"
+ d="M 243.62988,7.3609944 C 248.64901,5.9522606 248.53121,7.8674281 249.93941,8.795189 L 34.974214,76.572297 C 33.041161,74.848362 32.232239,75.552395 27.898382,75.685479 L 243.62988,7.3609944 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2182"
+ style="fill:#1a1a1a;fill-rule:evenodd;stroke:#333333;stroke-width:0.81824058;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+ <path
+ id="path3155"
+ sodipodi:nodetypes="ccccc"
+ d="M 41.127572,89.515883 L 247.04644,21.857141 L 245.56959,155.03645 L 66.892268,262.94003 L 41.127572,89.515883 z "
+ style="fill:url(#radialGradient3763);fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1" />
+ <path
+ id="path4130"
+ sodipodi:nodetypes="ccccc"
+ d="M 270.30146,173.89938 L 92.059548,291.88393 L 83.064049,286.84829 L 262.53913,170.82327 L 270.30146,173.89938 z "
+ style="fill:none;fill-rule:evenodd;stroke:#999999;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path5126"
+ sodipodi:nodetypes="ccc"
+ d="M 113.88343,277.34844 L 133.41939,264.57042 L 113.88343,277.34844 z "
+ style="opacity:0.3;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 260.55944,282.16245 C 260.55944,282.16245 299.34305,249.72696 299.34305,249.72696 C 301.56567,247.86815 306.24993,247.63883 309.88553,249.20565 C 309.88553,249.20565 329.40032,257.90584 329.40032,257.90584 C 333.27561,259.57597 334.75677,262.55505 332.67995,264.59388 C 332.67995,264.59388 296.81833,299.27831 296.81833,299.27831 C 294.33747,301.71377 288.97351,302.06916 284.843,300.06406 C 284.843,300.06406 262.71041,289.52115 262.71041,289.52115 C 258.86144,287.6527 257.92393,284.36659 260.55944,282.16245 C 260.55944,282.16245 260.55944,282.16245 260.55944,282.16245"
+ sodipodi:nodetypes="cccccccccc"
+ id="rect2179"
+ style="opacity:0.88999999;fill:#999999;fill-opacity:1;fill-rule:nonzero;stroke:#000000;stroke-width:0.97445869;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 156.31199,239.61556 C 158.84932,237.6711 165.25317,241.39833 164.88374,243.74344 L 156.31199,239.61556 z "
+ sodipodi:nodetypes="ccc"
+ id="path5322"
+ style="opacity:0.99720004;fill:#666666;fill-rule:evenodd;stroke:#000000;stroke-width:0.20456015;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+ <path
+ d="M 112.5495,278.27384 L 130.07045,266.61299 C 128.6036,263.60624 125.86497,261.45071 121.46704,261.8451 L 104.04747,273.28768 C 107.08494,271.21271 112.98604,275.81472 112.5495,278.27384 z "
+ sodipodi:nodetypes="ccccc"
+ id="path6299"
+ style="fill:#808080;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20456015;stroke-linecap:butt;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+ <path
+ d="M 104.03121,273.29774 C 107.49791,271.05672 113.43311,276.6129 112.52259,278.36122 L 104.03121,273.29774 z "
+ sodipodi:nodetypes="ccc"
+ id="path4349"
+ style="opacity:0.68999999;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:0.20456015;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+ <path
+ id="path8239"
+ sodipodi:nodetypes="ccccc"
+ d="M 164.84019,243.7543 L 179.63884,233.97378 C 178.89388,231.15559 176.668,229.33065 171.42447,229.78669 L 156.27423,239.63114 C 158.95009,237.51097 165.57347,241.76179 164.84019,243.7543 z "
+ style="fill:#4d4d4d;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20456015;stroke-linecap:butt;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+ <path
+ d="M 179.54294,233.98976 L 194.50141,224.24118 C 193.46879,221.32711 190.97123,219.43825 185.96742,220.29382 L 170.84915,230.10631 C 173.88125,228.78365 179.05461,230.45474 179.54294,233.98976 z "
+ sodipodi:nodetypes="ccccc"
+ id="path8241"
+ style="fill:#4d4d4d;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20456015;stroke-linecap:butt;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+ <path
+ id="path8243"
+ sodipodi:nodetypes="ccccc"
+ d="M 194.43749,224.22521 L 207.70194,215.40355 C 205.96614,212.71322 203.80418,211.59145 199.45559,211.72786 L 185.90349,220.3098 C 189.09541,219.56246 193.62952,220.65822 194.43749,224.22521 z "
+ style="fill:#4d4d4d;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20456015;stroke-linecap:butt;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+ <path
+ d="M 207.74987,215.38757 L 219.33629,207.66862 C 217.34479,205.17006 215.05499,204.11222 211.28174,204.12078 L 199.40765,211.74385 C 202.7434,211.44397 205.80725,212.3959 207.74987,215.38757 z "
+ sodipodi:nodetypes="ccccc"
+ id="path8245"
+ style="fill:#4d4d4d;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20456015;stroke-linecap:butt;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+ <path
+ id="path8247"
+ sodipodi:nodetypes="ccccc"
+ d="M 219.30433,207.70059 L 231.03457,199.96565 C 229.55448,196.50822 226.62543,195.89785 223.29965,196.19408 L 211.04202,204.2646 C 214.01019,203.93277 216.67451,204.42126 219.30433,207.70059 z "
+ style="fill:#4d4d4d;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.20456015;stroke-linecap:butt;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+ <path
+ id="rect2202"
+ sodipodi:nodetypes="cccccccccc"
+ d="M 221.68659,286.68216 C 221.68659,286.68216 271.7827,246.38199 271.7827,246.38199 C 272.38533,245.90267 273.62888,245.89275 274.57389,246.35926 C 274.57389,246.35926 282.22513,250.1218 282.22513,250.1218 C 283.18438,250.59535 283.48058,251.37156 282.88624,251.86264 C 282.88624,251.86264 233.55382,293.3224 233.55382,293.3224 C 232.81433,293.93337 231.39356,293.96431 230.37209,293.3911 C 230.37209,293.3911 222.1464,288.7742 222.1464,288.7742 C 221.14187,288.21048 220.9385,287.27719 221.68659,286.68216 C 221.68659,286.68216 221.68659,286.68216 221.68659,286.68216"
+ style="fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.69999999;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path2449"
+ d="M 219.03426,288.29491 L 230.39646,294.74997 L 222.03124,301.79784 L 210.47874,295.2849 L 219.03426,288.29491 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2451"
+ d="M 209.4152,296.07932 L 221.07617,302.55531 L 212.38161,309.86664 L 201.01939,302.85172 L 209.4152,296.07932 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2453"
+ d="M 200.12349,303.5516 L 211.48907,310.55261 L 202.5404,317.99996 L 190.60096,311.18361 L 200.12349,303.5516 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2455"
+ d="M 189.70952,311.95745 L 201.6931,318.78476 L 190.71106,328.04619 L 178.53214,321.0788 L 189.70952,311.95745 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2457"
+ sodipodi:nodetypes="ccccc"
+ d="M 273.68393,244.42789 L 284.19406,249.63047 L 292.16408,243.02723 L 281.60172,238.10854 L 273.68393,244.42789 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2459"
+ sodipodi:nodetypes="ccccc"
+ d="M 282.58552,237.35878 L 290.13787,231.26634 L 300.94177,235.89096 L 293.0886,242.26102 L 282.58552,237.35878 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2461"
+ sodipodi:nodetypes="ccccc"
+ d="M 291.16226,230.48888 L 301.87328,235.11565 L 309.36795,228.87453 L 299.02555,224.08989 L 291.16226,230.48888 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2463"
+ sodipodi:nodetypes="ccccc"
+ d="M 289.93538,230.01549 L 280.93975,225.55672 L 289.03737,219.25932 L 297.95995,223.58772 L 289.93538,230.01549 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2465"
+ d="M 177.42321,320.41889 L 166.48786,314.26225 L 188.72682,297.2375 L 199.03429,302.90648 L 177.42321,320.41889 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2467"
+ sodipodi:nodetypes="ccccc"
+ d="M 290.08046,218.43641 L 298.85735,222.73969 L 319.87746,205.75759 L 310.78391,202.19572 L 290.08046,218.43641 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2469"
+ sodipodi:nodetypes="ccccccc"
+ d="M 298.08535,210.7646 L 309.62549,201.69751 L 288.03973,193.31937 L 273.6384,203.95987 L 283.46625,207.8962 L 286.18927,205.81393 L 298.08535,210.7646 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2471"
+ sodipodi:nodetypes="ccccc"
+ d="M 286.62375,192.75442 L 266.91147,207.38925 L 257.59069,203.41102 L 277.74109,189.32694 L 286.62375,192.75442 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2473"
+ d="M 165.36066,313.63832 L 184.46965,298.98505 L 172.33203,292.59392 L 153.19109,306.83736 L 165.36066,313.63832 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2475"
+ d="M 151.95557,306.23713 L 167.0892,294.93513 L 156.09726,289.01503 L 140.88977,299.91382 L 151.95557,306.23713 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2477"
+ d="M 139.74507,299.3323 L 150.85746,291.335 L 140.35153,285.53863 L 129.36288,293.43149 L 139.74507,299.3323 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2497"
+ d="M 141.44916,284.84419 L 150.48582,278.42628 L 160.93153,283.91261 L 151.79607,290.59399 L 141.44916,284.84419 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2499"
+ d="M 200.06639,302.0818 L 208.31119,295.49502 L 197.64102,290.05561 L 189.67659,296.43646 L 200.06639,302.0818 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2501"
+ d="M 185.44374,298.19559 L 193.86354,291.59284 L 181.96116,285.25056 L 173.47309,291.62812 L 185.44374,298.19559 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2503"
+ d="M 168.25222,294.17765 L 176.70261,287.76919 L 165.64522,281.91859 L 157.20372,288.20299 L 168.25222,294.17765 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 151.55607,277.71812 L 160.35985,271.62622 L 170.55671,277.01143 L 161.94955,283.18847 L 151.55607,277.71812 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2505"
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2507"
+ d="M 177.75365,287.00502 L 186.23698,280.4648 L 175.54186,274.93789 L 166.63928,281.22229 L 177.75365,287.00502 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2509"
+ d="M 161.45339,270.89479 L 170.04758,264.82618 L 180.19785,270.07166 L 171.68385,276.24869 L 161.45339,270.89479 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2511"
+ d="M 194.72496,290.89785 L 203.34236,284.16335 L 191.50585,278.08454 L 183.01779,284.4621 L 194.72496,290.89785 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2513"
+ d="M 209.44739,294.73981 L 218.00506,287.74135 L 207.50073,282.4405 L 198.6953,289.16034 L 209.44739,294.73981 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2515"
+ d="M 219.03117,287.00034 L 227.95111,279.8372 L 217.57851,274.66809 L 208.54255,281.61848 L 219.03117,287.00034 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2517"
+ d="M 229.01016,279.06327 L 236.63632,273.08946 L 226.18986,268.0248 L 218.58741,273.879 L 229.01016,279.06327 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2519"
+ d="M 237.61157,272.25159 L 246.12267,265.48601 L 235.81592,260.50649 L 227.24338,267.18776 L 237.61157,272.25159 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 246.92622,264.70405 L 255.31922,258.03494 L 245.2101,253.19516 L 236.79987,259.71739 L 246.92622,264.70405 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2521"
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2523"
+ sodipodi:nodetypes="ccccc"
+ d="M 256.24944,257.30562 L 264.00138,251.14415 L 253.91623,246.49536 L 246.24255,252.47136 L 256.24944,257.30562 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 264.94343,250.38346 L 271.79281,244.57197 L 262.14241,240.07284 L 254.8806,245.75341 L 264.94343,250.38346 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2525"
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2527"
+ sodipodi:nodetypes="ccccc"
+ d="M 272.6829,243.79667 L 280.45445,237.62292 L 270.90284,233.32138 L 263.17995,239.29836 L 272.6829,243.79667 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 281.41039,236.84761 L 288.91847,230.83852 L 279.86087,226.40525 L 272.03919,232.4481 L 281.41039,236.84761 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2529"
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2531"
+ d="M 171.18769,264.04817 L 180.52708,257.51381 L 190.25819,262.57298 L 181.32501,269.3555 L 171.18769,264.04817 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2533"
+ sodipodi:nodetypes="ccccc"
+ d="M 181.56334,256.75316 L 190.15752,250.68454 L 199.60916,255.83687 L 191.23489,261.73446 L 181.56334,256.75316 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 191.13838,249.97224 L 200.12848,243.67074 L 209.58148,248.76519 L 200.57843,255.12855 L 191.13838,249.97224 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2535"
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2537"
+ sodipodi:nodetypes="ccccc"
+ d="M 201.14148,242.94942 L 208.96784,237.50889 L 218.76812,242.01382 L 210.62107,248.07043 L 201.14148,242.94942 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 209.93861,236.70829 L 218.48624,230.77939 L 228.17074,235.18651 L 219.79647,241.31698 L 209.93861,236.70829 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2539"
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2541"
+ sodipodi:nodetypes="ccccc"
+ d="M 219.48896,230.08656 L 227.94108,224.18895 L 237.62559,228.38647 L 229.19014,234.46609 L 219.48896,230.08656 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 229.04981,223.34939 L 237.64399,217.28078 L 247.18879,221.5016 L 238.67479,227.67863 L 229.04981,223.34939 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2543"
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2545"
+ sodipodi:nodetypes="ccccc"
+ d="M 238.75966,216.51376 L 246.46891,211.02733 L 256.03698,215.155 L 248.29149,220.74984 L 238.75966,216.51376 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 247.52515,210.2999 L 256.52687,204.13813 L 265.95523,208.14936 L 257.24328,214.48941 L 247.52515,210.2999 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2547"
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2242"
+ d="M 192.42707,277.38276 L 201.04243,270.93376 L 212.81727,276.9437 L 204.25518,283.46405 L 192.42707,277.38276 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2244"
+ d="M 202.01582,270.12726 L 210.21341,264.10219 L 221.92044,269.93134 L 213.74806,276.20857 L 202.01582,270.12726 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2246"
+ d="M 211.22102,263.35122 L 219.52192,257.1363 L 231.06172,262.8037 L 222.85738,269.20877 L 211.22102,263.35122 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2248"
+ sodipodi:nodetypes="ccccc"
+ d="M 220.48694,256.41147 L 231.99345,262.05286 L 239.51447,256.25393 L 228.07804,250.72214 C 228.07804,250.72214 220.51891,256.44343 220.48694,256.41147 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 228.98488,249.90241 L 240.4914,255.5438 L 248.01241,249.74486 L 236.57599,244.21308 C 236.57599,244.21308 229.01684,249.93436 228.98488,249.90241 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2250"
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2252"
+ sodipodi:nodetypes="ccccc"
+ d="M 237.56868,243.44725 L 248.97931,248.99274 L 257.07404,242.57877 L 246.02277,237.37437 L 237.56868,243.44725 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 247.06561,236.56786 L 258.0749,241.84765 L 265.97947,235.69713 L 254.71266,230.82259 L 247.06561,236.56786 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2254"
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2256"
+ sodipodi:nodetypes="ccccc"
+ d="M 255.89713,229.9869 L 266.95163,234.90506 L 274.38224,229.19653 L 263.30742,224.43317 L 255.89713,229.9869 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 264.32207,223.68092 L 275.3101,228.44997 L 282.89504,222.58711 L 271.91318,217.99159 L 264.32207,223.68092 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2258"
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2260"
+ sodipodi:nodetypes="ccccc"
+ d="M 272.9276,217.22814 L 283.86907,221.82988 L 290.30525,216.88979 L 279.45645,212.28463 L 272.9276,217.22814 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 280.51495,211.48086 L 291.20783,216.17301 L 297.14678,211.54933 L 286.38838,207.05719 L 280.51495,211.48086 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2262"
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2264"
+ d="M 187.21456,279.65363 L 195.69788,273.11343 L 185.00277,267.58651 L 176.10019,273.87091 L 187.21456,279.65363 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2266"
+ d="M 196.93117,272.23833 L 205.68571,265.78852 L 194.71938,260.1712 L 185.8168,266.4556 L 196.93117,272.23833 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2268"
+ sodipodi:nodetypes="ccccc"
+ d="M 206.76011,265.04128 L 215.60505,258.63667 L 204.90993,253.42617 L 196.23337,259.52977 L 206.76011,265.04128 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 216.55615,257.79127 L 225.72667,251.12321 L 215.30323,245.97983 L 205.95318,252.6478 L 216.55615,257.79127 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2270"
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2272"
+ sodipodi:nodetypes="ccccc"
+ d="M 226.62217,250.28446 L 234.42747,244.46748 L 224.14692,239.49074 L 216.41185,245.13456 L 226.62217,250.28446 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 235.3202,243.66108 L 242.92208,238.20571 L 232.8824,233.22122 L 225.20027,238.78239 L 235.3202,243.66108 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2274"
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2276"
+ sodipodi:nodetypes="ccccc"
+ d="M 244.04269,237.40717 L 251.47219,231.70252 L 241.73406,226.77098 L 234.01317,232.34768 L 244.04269,237.40717 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 252.6522,231.11226 L 260.3045,225.27523 L 250.58643,220.64138 L 242.89843,226.09476 L 252.6522,231.11226 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2278"
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2280"
+ sodipodi:nodetypes="ccccc"
+ d="M 261.23976,224.42239 L 268.45876,219.21044 L 258.80517,214.83417 L 251.72352,219.79033 L 261.23976,224.42239 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 269.52519,218.43638 L 275.83883,213.61385 L 266.36416,209.30737 L 259.8121,214.10012 L 269.52519,218.43638 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2282"
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path2284"
+ sodipodi:nodetypes="ccccc"
+ d="M 276.80269,212.87655 L 282.2575,208.64164 L 272.64721,204.83239 L 267.406,208.63069 L 276.80269,212.87655 z "
+ style="fill:#ff00ff;fill-rule:evenodd;stroke:#000000;stroke-width:1.02280068px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="rect3291"
+ d="M 302.87759,234.27933 C 302.87759,234.27933 308.38212,229.69548 308.38212,229.69548 C 308.92862,229.24038 308.77424,228.59985 308.03355,228.25718 C 308.03355,228.25718 300.43832,224.74347 300.43832,224.74347 C 299.65719,224.38211 298.56475,224.46487 297.99153,224.93134 C 297.99153,224.93134 292.2163,229.63113 292.2163,229.63113 C 291.63275,230.10601 291.81664,230.77156 292.62585,231.12111 C 292.62585,231.12111 300.49174,234.51889 300.49174,234.51889 C 301.25859,234.85015 302.32155,234.74235 302.87759,234.27933 C 302.87759,234.27933 302.87759,234.27933 302.87759,234.27933"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3293"
+ d="M 235.3731,272.47703 C 235.3731,272.47703 227.42329,268.6228 227.42329,268.6228 C 226.73948,268.29128 225.78761,268.33455 225.2875,268.71966 C 225.2875,268.71966 219.50192,273.17479 219.50192,273.17479 C 218.99549,273.56477 219.13572,274.15174 219.81793,274.49107 C 219.81793,274.49107 227.7497,278.43631 227.7497,278.43631 C 228.44749,278.78339 229.41954,278.74258 229.9276,278.34461 C 229.9276,278.34461 235.73123,273.79845 235.73123,273.79845 C 236.23285,273.4055 236.07241,272.81607 235.3731,272.47703 C 235.3731,272.47703 235.3731,272.47703 235.3731,272.47703"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3299"
+ d="M 247.43674,211.44485 C 247.43674,211.44485 255.04475,214.72695 255.04475,214.72695 C 255.59412,214.96395 255.68572,215.40873 255.24904,215.72416 C 255.24904,215.72416 249.09015,220.17295 249.09015,220.17295 C 248.64784,220.49244 247.85024,220.55375 247.30291,220.31051 C 247.30291,220.31051 239.72373,216.94221 239.72373,216.94221 C 239.18929,216.7047 239.11431,216.26136 239.55452,215.94809 C 239.55452,215.94809 245.68459,211.58552 245.68459,211.58552 C 246.11924,211.27618 246.90023,211.21341 247.43674,211.44485 C 247.43674,211.44485 247.43674,211.44485 247.43674,211.44485"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3301"
+ d="M 211.38791,264.687 C 211.38791,264.687 220.69642,269.32187 220.69642,269.32187 C 221.37384,269.65917 221.55369,270.21304 221.09728,270.56361 C 221.09728,270.56361 214.59913,275.55485 214.59913,275.55485 C 214.12804,275.9167 213.20005,275.92451 212.52093,275.57249 C 212.52093,275.57249 203.19239,270.73714 203.19239,270.73714 C 202.53988,270.39891 202.39682,269.84723 202.86919,269.50005 C 202.86919,269.50005 209.38739,264.7093 209.38739,264.7093 C 209.84537,264.37269 210.73656,264.36268 211.38791,264.687 C 211.38791,264.687 211.38791,264.687 211.38791,264.687"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3305"
+ d="M 190.80124,251.03544 C 190.80124,251.03544 198.99762,255.5035 198.99762,255.5035 C 199.33669,255.68835 199.3609,256.01171 199.05255,256.22886 C 199.05255,256.22886 191.79012,261.34344 191.79012,261.34344 C 191.48252,261.56007 190.95608,261.59085 190.60912,261.41215 C 190.60912,261.41215 182.222,257.0924 182.222,257.0924 C 181.85741,256.90462 181.81745,256.57372 182.13313,256.35082 C 182.13313,256.35082 189.58629,251.08792 189.58629,251.08792 C 189.90275,250.86444 190.44492,250.8412 190.80124,251.03544 C 190.80124,251.03544 190.80124,251.03544 190.80124,251.03544"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3309"
+ d="M 200.86922,319.47957 C 200.86922,319.47957 191.5626,327.32806 191.5626,327.32806 C 191.09111,327.72566 190.29604,327.80875 189.78059,327.51386 C 189.78059,327.51386 179.45944,321.6093 179.45944,321.6093 C 178.94568,321.31539 178.91894,320.76315 179.3988,320.37157 C 179.3988,320.37157 188.87097,312.64175 188.87097,312.64175 C 189.33581,312.26242 190.11645,312.18928 190.62199,312.47729 C 190.62199,312.47729 200.77757,318.26317 200.77757,318.26317 C 201.28475,318.55212 201.32593,319.09442 200.86922,319.47957 C 200.86922,319.47957 200.86922,319.47957 200.86922,319.47957"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3311"
+ d="M 227.03328,279.37981 C 227.03328,279.37981 218.4746,275.11465 218.4746,275.11465 C 217.9779,274.86712 217.23368,274.93335 216.80449,275.26346 C 216.80449,275.26346 209.3489,280.99824 209.3489,280.99824 C 208.90258,281.34154 208.94628,281.82562 209.44841,282.08328 C 209.44841,282.08328 218.10282,286.52398 218.10282,286.52398 C 218.61686,286.78775 219.38667,286.71486 219.82736,286.36095 C 219.82736,286.36095 227.18725,280.45063 227.18725,280.45063 C 227.61081,280.1105 227.5415,279.63307 227.03328,279.37981 C 227.03328,279.37981 227.03328,279.37981 227.03328,279.37981"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3313"
+ d="M 200.87727,244.07429 C 200.87727,244.07429 208.8242,248.35707 208.8242,248.35707 C 209.24365,248.58313 209.26299,248.99029 208.86725,249.27001 C 208.86725,249.27001 201.29858,254.61953 201.29858,254.61953 C 200.89969,254.90148 200.24107,254.94426 199.82216,254.71545 C 199.82216,254.71545 191.88613,250.38067 191.88613,250.38067 C 191.47181,250.15435 191.45917,249.7474 191.8575,249.46819 C 191.8575,249.46819 199.41526,244.17067 199.41526,244.17067 C 199.81044,243.89367 200.46234,243.85067 200.87727,244.07429 C 200.87727,244.07429 200.87727,244.07429 200.87727,244.07429"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3317"
+ d="M 168.98052,312.35404 C 168.98052,312.35404 186.52228,298.92516 186.52228,298.92516 C 187.74742,297.98727 189.20942,297.50291 189.80916,297.83277 C 189.80916,297.83277 197.94313,302.30636 197.94313,302.30636 C 198.54751,302.63875 198.08283,303.67748 196.89261,304.64197 C 196.89261,304.64197 179.8462,318.45547 179.8462,318.45547 C 178.50836,319.53957 176.90663,320.12806 176.26526,319.76696 C 176.26526,319.76696 167.6358,314.90855 167.6358,314.90855 C 166.99971,314.55042 167.60418,313.40767 168.98052,312.35404 C 168.98052,312.35404 168.98052,312.35404 168.98052,312.35404"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3319"
+ d="M 192.5101,290.87165 C 192.5101,290.87165 183.27464,285.95046 183.27464,285.95046 C 182.54633,285.56237 181.54412,285.5639 181.0251,285.95388 C 181.0251,285.95388 174.43893,290.90244 174.43893,290.90244 C 173.90432,291.3041 174.06146,291.95091 174.79375,292.35267 C 174.79375,292.35267 184.08217,297.44861 184.08217,297.44861 C 184.83581,297.86207 185.87162,297.86005 186.40206,297.44408 C 186.40206,297.44408 192.93525,292.32079 192.93525,292.32079 C 193.44997,291.91714 193.25925,291.27084 192.5101,290.87165 C 192.5101,290.87165 192.5101,290.87165 192.5101,290.87165"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3321"
+ d="M 185.1382,279.89699 C 185.1382,279.89699 176.63387,275.50221 176.63387,275.50221 C 176.02877,275.18952 175.15088,275.21388 174.66322,275.55813 C 174.66322,275.55813 167.58535,280.55447 167.58535,280.55447 C 167.06223,280.92372 167.14522,281.48553 167.77396,281.81266 C 167.77396,281.81266 176.61165,286.41084 176.61165,286.41084 C 177.2442,286.73996 178.15674,286.69425 178.65527,286.3099 C 178.65527,286.3099 185.39983,281.11021 185.39983,281.11021 C 185.86446,280.752 185.74682,280.2115 185.1382,279.89699 C 185.1382,279.89699 185.1382,279.89699 185.1382,279.89699"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3323"
+ d="M 161.12258,272.02905 C 161.12258,272.02905 169.7964,276.60989 169.7964,276.60989 C 170.21763,276.83236 170.27487,277.2137 169.92432,277.46528 C 169.92432,277.46528 162.60291,282.7196 162.60291,282.7196 C 162.24117,282.9792 161.60395,283.00656 161.17461,282.7806 C 161.17461,282.7806 152.33353,278.12732 152.33353,278.12732 C 151.90283,277.90063 151.85435,277.51172 152.22438,277.25569 C 152.22438,277.25569 159.71303,272.0738 159.71303,272.0738 C 160.07158,271.82571 160.70003,271.80589 161.12258,272.02905 C 161.12258,272.02905 161.12258,272.02905 161.12258,272.02905"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3325"
+ d="M 220.2904,303.21609 C 220.2904,303.21609 213.19436,309.1832 213.19436,309.1832 C 212.74444,309.56153 211.88835,309.56212 211.27912,309.18598 C 211.27912,309.18598 202.00839,303.46232 202.00839,303.46232 C 201.45919,303.12325 201.36941,302.5694 201.80347,302.21926 C 201.80347,302.21926 208.65568,296.69198 208.65568,296.69198 C 209.07675,296.35232 209.86703,296.33025 210.43121,296.64355 C 210.43121,296.64355 219.94579,301.92755 219.94579,301.92755 C 220.57046,302.27448 220.72603,302.84974 220.2904,303.21609 C 220.2904,303.21609 220.2904,303.21609 220.2904,303.21609"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3327"
+ d="M 250.18155,231.04893 C 250.18155,231.04893 243.02922,227.42687 243.02922,227.42687 C 242.31181,227.06355 241.28875,227.09263 240.73358,227.49361 C 240.73358,227.49361 235.06335,231.58914 235.06335,231.58914 C 234.48252,232.00866 234.60822,232.64785 235.34714,233.02061 C 235.34714,233.02061 242.71349,236.73664 242.71349,236.73664 C 243.44994,237.10815 244.49431,237.0604 245.05318,236.63127 C 245.05318,236.63127 250.50942,232.44177 250.50942,232.44177 C 251.04367,232.03155 250.89663,231.41106 250.18155,231.04893 C 250.18155,231.04893 250.18155,231.04893 250.18155,231.04893"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3329"
+ d="M 241.73896,237.6183 C 241.73896,237.6183 234.09875,233.82511 234.09875,233.82511 C 233.42547,233.49084 232.47146,233.51871 231.96125,233.88804 C 231.96125,233.88804 226.11501,238.1202 226.11501,238.1202 C 225.60814,238.48713 225.74764,239.04628 226.42628,239.37343 C 226.42628,239.37343 234.12755,243.08611 234.12755,243.08611 C 234.78882,243.40491 235.72382,243.37142 236.22543,243.01146 C 236.22543,243.01146 242.01062,238.85982 242.01062,238.85982 C 242.51547,238.49751 242.39495,237.94399 241.73896,237.6183 C 241.73896,237.6183 241.73896,237.6183 241.73896,237.6183"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3331"
+ d="M 291.06923,231.66501 C 291.06923,231.66501 299.93537,235.46017 299.93537,235.46017 C 300.49195,235.69842 300.62867,236.14494 300.23967,236.46046 C 300.23967,236.46046 293.79405,241.68879 293.79405,241.68879 C 293.40327,242.00578 292.65126,242.0569 292.11015,241.80432 C 292.11015,241.80432 283.49087,237.78134 283.49087,237.78134 C 282.98847,237.54685 282.88811,237.11468 283.26389,236.81155 C 283.26389,236.81155 289.4626,231.81108 289.4626,231.81108 C 289.83674,231.50927 290.5524,231.44378 291.06923,231.66501 C 291.06923,231.66501 291.06923,231.66501 291.06923,231.66501"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3333"
+ d="M 214.6618,258.17714 C 214.6618,258.17714 205.79323,253.8565 205.79323,253.8565 C 205.30323,253.61778 204.58399,253.65545 204.17864,253.94061 C 204.17864,253.94061 196.98327,259.00223 196.98327,259.00223 C 196.56804,259.29434 196.62028,259.73235 197.10235,259.98475 C 197.10235,259.98475 205.83129,264.55497 205.83129,264.55497 C 206.34512,264.82401 207.10144,264.79412 207.5249,264.48748 C 207.5249,264.48748 214.85991,259.17623 214.85991,259.17623 C 215.27294,258.87715 215.18363,258.43136 214.6618,258.17714 C 214.6618,258.17714 214.6618,258.17714 214.6618,258.17714"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3335"
+ d="M 238.61522,217.71027 C 238.61522,217.71027 246.20482,221.06648 246.20482,221.06648 C 246.74975,221.30745 246.80537,221.77975 246.32841,222.12581 C 246.32841,222.12581 239.55856,227.03746 239.55856,227.03746 C 239.06928,227.39242 238.23201,227.47949 237.68245,227.2323 C 237.68245,227.2323 230.0291,223.78987 230.0291,223.78987 C 229.48641,223.54578 229.44798,223.06823 229.94181,222.71952 C 229.94181,222.71952 236.77542,217.89409 236.77542,217.89409 C 237.25693,217.55409 238.07699,217.47225 238.61522,217.71027 C 238.61522,217.71027 238.61522,217.71027 238.61522,217.71027"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3337"
+ d="M 228.91723,224.61205 C 228.91723,224.61205 236.61775,227.94965 236.61775,227.94965 C 237.17563,228.19144 237.24665,228.65958 236.77513,228.99941 C 236.77513,228.99941 230.06777,233.83356 230.06777,233.83356 C 229.58195,234.18369 228.73926,234.26255 228.18027,234.01019 C 228.18027,234.01019 220.46652,230.52787 220.46652,230.52787 C 219.92451,230.28318 219.88144,229.8127 220.36809,229.47313 C 220.36809,229.47313 227.0887,224.78372 227.0887,224.78372 C 227.56129,224.45396 228.37602,224.37747 228.91723,224.61205 C 228.91723,224.61205 228.91723,224.61205 228.91723,224.61205"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3339"
+ d="M 257.14967,204.40311 C 257.14967,204.40311 265.32623,207.88176 265.32623,207.88176 C 265.67464,208.02998 265.706,208.33073 265.3957,208.55655 C 265.3957,208.55655 257.84099,214.05443 257.84099,214.05443 C 257.51021,214.29515 256.95402,214.3647 256.59485,214.20987 C 256.59485,214.20987 248.16698,210.57659 248.16698,210.57659 C 247.81135,210.42328 247.8009,210.11114 248.14264,209.87723 C 248.14264,209.87723 255.94863,204.53395 255.94863,204.53395 C 256.2693,204.31446 256.80459,204.25629 257.14967,204.40311 C 257.14967,204.40311 257.14967,204.40311 257.14967,204.40311"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3341"
+ d="M 201.8511,271.34651 C 201.8511,271.34651 212.00249,276.52784 212.00249,276.52784 C 212.45381,276.7582 212.55592,277.14272 212.23112,277.39008 C 212.23112,277.39008 204.84954,283.01143 204.84954,283.01143 C 204.52035,283.26212 203.89008,283.27634 203.43671,283.04324 C 203.43671,283.04324 193.23937,277.8004 193.23937,277.8004 C 192.78929,277.56899 192.69387,277.18305 193.0251,276.9351 C 193.0251,276.9351 200.45262,271.37525 200.45262,271.37525 C 200.77944,271.1306 201.40305,271.11781 201.8511,271.34651 C 201.8511,271.34651 201.8511,271.34651 201.8511,271.34651"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3343"
+ d="M 219.21667,231.1118 C 219.21667,231.1118 227.42383,234.84661 227.42383,234.84661 C 227.83744,235.03484 227.89363,235.38938 227.54865,235.64192 C 227.54865,235.64192 220.45221,240.83693 220.45221,240.83693 C 220.08929,241.10262 219.45708,241.15831 219.03594,240.96141 C 219.03594,240.96141 210.6819,237.05577 210.6819,237.05577 C 210.26995,236.86319 210.23739,236.50104 210.60771,236.24418 C 210.60771,236.24418 217.85107,231.21996 217.85107,231.21996 C 218.20329,230.97566 218.81185,230.92758 219.21667,231.1118 C 219.21667,231.1118 219.21667,231.1118 219.21667,231.1118"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3345"
+ d="M 166.11203,294.40885 C 166.11203,294.40885 157.04241,289.52408 157.04241,289.52408 C 156.51843,289.24186 155.52217,289.42717 154.80588,289.94053 C 154.80588,289.94053 142.25863,298.93279 142.25863,298.93279 C 141.50124,299.47559 141.31352,300.15596 141.84075,300.45723 C 141.84075,300.45723 150.97129,305.67469 150.97129,305.67469 C 151.51617,305.98604 152.56442,305.78244 153.31853,305.21926 C 153.31853,305.21926 165.80481,295.89435 165.80481,295.89435 C 166.51725,295.36228 166.65299,294.70021 166.11203,294.40885 C 166.11203,294.40885 166.11203,294.40885 166.11203,294.40885"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3349"
+ d="M 151.01455,278.70397 C 151.01455,278.70397 160.37455,283.62006 160.37455,283.62006 C 160.68292,283.78202 160.7229,284.06518 160.46357,284.25485 C 160.46357,284.25485 152.27741,290.24195 152.27741,290.24195 C 152.01084,290.43692 151.5497,290.45709 151.24414,290.28729 C 151.24414,290.28729 141.97268,285.13512 141.97268,285.13512 C 141.68247,284.97384 141.66152,284.69337 141.92511,284.50616 C 141.92511,284.50616 150.02275,278.75515 150.02275,278.75515 C 150.27937,278.57289 150.72146,278.55003 151.01455,278.70397 C 151.01455,278.70397 151.01455,278.70397 151.01455,278.70397"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3351"
+ d="M 175.52443,287.1458 C 175.52443,287.1458 166.79876,282.52893 166.79876,282.52893 C 166.15936,282.19062 165.25137,282.21179 164.76171,282.57631 C 164.76171,282.57631 158.10028,287.53553 158.10028,287.53553 C 157.60379,287.90516 157.7174,288.48077 158.35625,288.82623 C 158.35625,288.82623 167.07489,293.541 167.07489,293.541 C 167.72676,293.8935 168.65274,293.87392 169.1498,293.49696 C 169.1498,293.49696 175.81827,288.43985 175.81827,288.43985 C 176.30838,288.06815 176.17677,287.49096 175.52443,287.1458 C 175.52443,287.1458 175.52443,287.1458 175.52443,287.1458"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3353"
+ d="M 201.97097,283.45905 C 201.97097,283.45905 192.78768,278.74285 192.78768,278.74285 C 192.07622,278.37747 191.08839,278.3982 190.5689,278.78852 C 190.5689,278.78852 183.98269,283.7371 183.98269,283.7371 C 183.44857,284.1384 183.58158,284.77203 184.28486,285.15865 C 184.28486,285.15865 193.36778,290.15177 193.36778,290.15177 C 194.11817,290.56428 195.16258,290.55584 195.70514,290.13183 C 195.70514,290.13183 202.39168,284.90631 202.39168,284.90631 C 202.9188,284.49436 202.72924,283.84847 201.97097,283.45905 C 201.97097,283.45905 201.97097,283.45905 201.97097,283.45905"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3355"
+ d="M 183.209,298.32124 C 183.209,298.32124 173.55788,293.23939 173.55788,293.23939 C 172.87828,292.88156 171.48018,293.22782 170.41912,294.01738 C 170.41912,294.01738 155.20003,305.34244 155.20003,305.34244 C 154.08849,306.16958 153.73855,307.14332 154.41967,307.52396 C 154.41967,307.52396 164.0962,312.93167 164.0962,312.93167 C 164.79619,313.32286 166.25692,312.95103 167.36704,312.09976 C 167.36704,312.09976 182.56068,300.44889 182.56068,300.44889 C 183.61957,299.63691 183.90689,298.68872 183.209,298.32124 C 183.209,298.32124 183.209,298.32124 183.209,298.32124"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3357"
+ d="M 181.25173,257.89055 C 181.25173,257.89055 189.52937,262.19408 189.52937,262.19408 C 189.93309,262.40396 189.973,262.78951 189.61763,263.05932 C 189.61763,263.05932 182.01974,268.82803 182.01974,268.82803 C 181.63543,269.11981 180.98628,269.17817 180.56566,268.95795 C 180.56566,268.95795 171.94248,264.44335 171.94248,264.44335 C 171.5243,264.2244 171.5122,263.82114 171.91393,263.54006 C 171.91393,263.54006 179.85732,257.98241 179.85732,257.98241 C 180.2289,257.72244 180.85025,257.68182 181.25173,257.89055 C 181.25173,257.89055 181.25173,257.89055 181.25173,257.89055"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3359"
+ d="M 207.30074,294.9799 C 207.30074,294.9799 198.59287,290.54083 198.59287,290.54083 C 198.06485,290.27167 197.31412,290.31751 196.90812,290.6428 C 196.90812,290.6428 190.40778,295.85065 190.40778,295.85065 C 190.00268,296.17521 190.08929,296.66071 190.60345,296.94008 C 190.60345,296.94008 199.08253,301.54721 199.08253,301.54721 C 199.62684,301.84297 200.40395,301.81213 200.82331,301.47711 C 200.82331,301.47711 207.55245,296.10117 207.55245,296.10117 C 207.97277,295.76537 207.85976,295.26488 207.30074,294.9799 C 207.30074,294.9799 207.30074,294.9799 207.30074,294.9799"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3361"
+ d="M 210.31834,311.52693 C 210.31834,311.52693 203.74605,316.99659 203.74605,316.99659 C 203.0788,317.55189 201.86,317.61152 201.01035,317.12644 C 201.01035,317.12644 192.24289,312.121 192.24289,312.121 C 191.3355,311.60296 191.17426,310.72413 191.88471,310.15474 C 191.88471,310.15474 198.87844,304.54948 198.87844,304.54948 C 199.56891,303.99608 200.82226,303.98204 201.68556,304.51382 C 201.68556,304.51382 210.03168,309.65489 210.03168,309.65489 C 210.84096,310.15338 210.96757,310.98662 210.31834,311.52693 C 210.31834,311.52693 210.31834,311.52693 210.31834,311.52693"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3363"
+ d="M 229.40869,295.58217 C 229.40869,295.58217 223.04271,300.94565 223.04271,300.94565 C 222.48275,301.41742 221.41805,301.45214 220.65599,301.0225 C 220.65599,301.0225 211.86431,296.06605 211.86431,296.06605 C 211.09687,295.63339 210.94055,294.9076 211.51326,294.43967 C 211.51326,294.43967 218.02408,289.12024 218.02408,289.12024 C 218.58411,288.66268 219.64217,288.64028 220.39694,289.06907 C 220.39694,289.06907 229.04379,293.98149 229.04379,293.98149 C 229.79334,294.40733 229.95631,295.12081 229.40869,295.58217 C 229.40869,295.58217 229.40869,295.58217 229.40869,295.58217"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3365"
+ d="M 217.05231,287.26056 C 217.05231,287.26056 208.43084,282.90987 208.43084,282.90987 C 207.9153,282.6497 207.16011,282.70044 206.73573,283.02431 C 206.73573,283.02431 199.50923,288.5392 199.50923,288.5392 C 199.05894,288.88283 199.11946,289.38044 199.64696,289.65417 C 199.64696,289.65417 208.47177,294.23353 208.47177,294.23353 C 209.01197,294.51386 209.80095,294.45066 210.23875,294.09263 C 210.23875,294.09263 217.26191,288.3491 217.26191,288.3491 C 217.67418,288.01194 217.57986,287.52677 217.05231,287.26056 C 217.05231,287.26056 217.05231,287.26056 217.05231,287.26056"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3367"
+ d="M 170.90895,265.27133 C 170.90895,265.27133 179.32655,269.62137 179.32655,269.62137 C 179.80913,269.87078 179.87784,270.30382 179.47992,270.59253 C 179.47992,270.59253 172.41934,275.71508 172.41934,275.71508 C 172.01209,276.01056 171.29204,276.04365 170.8056,275.78907 C 170.8056,275.78907 162.3215,271.34911 162.3215,271.34911 C 161.84045,271.09734 161.7847,270.66085 162.19576,270.37059 C 162.19576,270.37059 169.32283,265.33795 169.32283,265.33795 C 169.72453,265.05428 170.43163,265.02465 170.90895,265.27133 C 170.90895,265.27133 170.90895,265.27133 170.90895,265.27133"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3369"
+ d="M 204.55438,265.20903 C 204.55438,265.20903 195.83444,260.74237 195.83444,260.74237 C 195.21646,260.42583 194.32033,260.45289 193.82368,260.80347 C 193.82368,260.80347 186.74496,265.80041 186.74496,265.80041 C 186.23123,266.16305 186.32053,266.71769 186.94675,267.04351 C 186.94675,267.04351 195.78441,271.64167 195.78441,271.64167 C 196.41947,271.97209 197.33877,271.93803 197.84403,271.56578 C 197.84403,271.56578 204.80505,266.43735 204.80505,266.43735 C 205.29337,266.07757 205.18091,265.52994 204.55438,265.20903 C 204.55438,265.20903 204.55438,265.20903 204.55438,265.20903"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3371"
+ d="M 194.5991,272.5456 C 194.5991,272.5456 186.09478,268.15083 186.09478,268.15083 C 185.48971,267.83814 184.61179,267.8625 184.12412,268.20675 C 184.12412,268.20675 177.04625,273.20308 177.04625,273.20308 C 176.52314,273.57235 176.60616,274.13416 177.23487,274.46127 C 177.23487,274.46127 186.07255,279.05946 186.07255,279.05946 C 186.70512,279.38857 187.61765,279.34288 188.11618,278.95853 C 188.11618,278.95853 194.86074,273.75884 194.86074,273.75884 C 195.32537,273.40062 195.20773,272.86013 194.5991,272.5456 C 194.5991,272.5456 194.5991,272.5456 194.5991,272.5456"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3373"
+ d="M 284.73208,249.18471 C 284.73208,249.18471 291.64382,243.45826 291.64382,243.45826 C 291.9322,243.21935 291.84218,242.87732 291.44316,242.6915 C 291.44316,242.6915 282.28362,238.42609 282.28362,238.42609 C 281.90552,238.25002 281.37123,238.2925 281.08461,238.52125 C 281.08461,238.52125 274.21817,244.0015 274.21817,244.0015 C 273.92236,244.23759 273.98607,244.57745 274.36212,244.76359 C 274.36212,244.76359 283.47634,249.2752 283.47634,249.2752 C 283.87359,249.47184 284.43418,249.43153 284.73208,249.18471 C 284.73208,249.18471 284.73208,249.18471 284.73208,249.18471"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3375"
+ d="M 266.25849,207.11055 C 266.25849,207.11055 258.22296,203.68087 258.22296,203.68087 C 257.8725,203.5313 258.26258,202.94141 259.09217,202.36158 C 259.09217,202.36158 276.45653,190.22478 276.45653,190.22478 C 277.16993,189.72614 278.01001,189.4307 278.34442,189.55973 C 278.34442,189.55973 286.00228,192.51461 286.00228,192.51461 C 286.34641,192.64741 286.06579,193.16868 285.36877,193.68615 C 285.36877,193.68615 268.38219,206.29734 268.38219,206.29734 C 267.56963,206.9006 266.62006,207.26486 266.25849,207.11055 C 266.25849,207.11055 266.25849,207.11055 266.25849,207.11055"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3377"
+ d="M 150.04703,290.88787 C 150.04703,290.88787 141.14376,285.97573 141.14376,285.97573 C 140.70469,285.73348 139.97814,285.80683 139.51431,286.13998 C 139.51431,286.13998 130.20189,292.82886 130.20189,292.82886 C 129.7371,293.1627 129.71188,293.62984 130.14579,293.87645 C 130.14579,293.87645 138.94417,298.87711 138.94417,298.87711 C 139.38768,299.12918 140.1235,299.05996 140.59351,298.72169 C 140.59351,298.72169 150.01083,291.94429 150.01083,291.94429 C 150.47987,291.60674 150.49581,291.13546 150.04703,290.88787 C 150.04703,290.88787 150.04703,290.88787 150.04703,290.88787"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3379"
+ sodipodi:nodetypes="cccccssssccccc"
+ d="M 308.02082,201.07469 C 308.02082,201.07469 290.25388,194.17877 290.25388,194.17877 C 289.03643,193.70622 287.49217,193.72395 286.81047,194.22762 C 286.81047,194.22762 274.92805,203.00701 274.92805,203.00701 C 274.21432,203.53434 274.06866,203.98769 275.45256,204.3729 L 282.20799,207.13372 C 283.30081,207.58033 283.29864,207.60345 284.24763,206.91193 L 285.51228,205.99038 C 285.78882,205.78886 286.61757,205.71073 287.50613,206.09359 L 296.65875,210.03701 C 297.66812,210.31796 298.54496,210.40349 299.11475,209.9558 C 299.11475,209.9558 308.63657,202.4745 308.63657,202.4745 C 309.1849,202.04368 308.91548,201.42193 308.02082,201.07469 C 308.02082,201.07469 308.02082,201.07469 308.02082,201.07469"
+ style="fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3381"
+ d="M 263.00018,250.94679 C 263.00018,250.94679 254.5221,247.0388 254.5221,247.0388 C 254.08593,246.83775 253.46532,246.88652 253.12956,247.148 C 253.12956,247.148 246.6785,252.17186 246.6785,252.17186 C 246.33694,252.43788 246.40946,252.82015 246.84217,253.0292 C 246.84217,253.0292 255.25442,257.09309 255.25442,257.09309 C 255.70512,257.31082 256.34668,257.26542 256.6918,256.99111 C 256.6918,256.99111 263.20867,251.81133 263.20867,251.81133 C 263.54778,251.54179 263.45431,251.15613 263.00018,250.94679 C 263.00018,250.94679 263.00018,250.94679 263.00018,250.94679"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3385"
+ d="M 224.63535,250.5847 C 224.63535,250.5847 216.40989,246.52591 216.40989,246.52591 C 215.79702,246.2235 214.86783,246.29035 214.3264,246.67645 C 214.3264,246.67645 206.94803,251.93833 206.94803,251.93833 C 206.39716,252.33118 206.45553,252.89148 207.07898,253.19391 C 207.07898,253.19391 215.44611,257.2528 215.44611,257.2528 C 216.0613,257.55121 216.99156,257.47468 217.53182,257.08184 C 217.53182,257.08184 224.76854,251.81989 224.76854,251.81989 C 225.29959,251.43374 225.24017,250.88315 224.63535,250.5847 C 224.63535,250.5847 224.63535,250.5847 224.63535,250.5847"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3387"
+ d="M 220.79919,257.76358 C 220.79919,257.76358 229.7534,262.16116 229.7534,262.16116 C 230.47771,262.51688 230.65884,263.11821 230.15739,263.5097 C 230.15739,263.5097 223.79138,268.4796 223.79138,268.4796 C 223.27442,268.8832 222.26833,268.91225 221.53782,268.54453 C 221.53782,268.54453 212.50868,263.9994 212.50868,263.9994 C 211.79484,263.64005 211.64287,263.03537 212.16581,262.64384 C 212.16581,262.64384 218.60675,257.8215 218.60675,257.8215 C 219.11421,257.44156 220.09111,257.41585 220.79919,257.76358 C 220.79919,257.76358 220.79919,257.76358 220.79919,257.76358"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3389"
+ d="M 209.90305,237.93879 C 209.90305,237.93879 217.69144,241.5189 217.69144,241.5189 C 218.2857,241.79206 218.40792,242.28161 217.95894,242.61539 C 217.95894,242.61539 211.48141,247.43084 211.48141,247.43084 C 211.00555,247.78462 210.15328,247.81772 209.57718,247.50651 C 209.57718,247.50651 202.04394,243.43694 202.04394,243.43694 C 201.54218,243.16588 201.50989,242.69331 201.96601,242.37623 C 201.96601,242.37623 208.18868,238.05054 208.18868,238.05054 C 208.62095,237.75004 209.38314,237.69979 209.90305,237.93879 C 209.90305,237.93879 209.90305,237.93879 209.90305,237.93879"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="rect3391"
+ d="M 300.49388,221.41753 C 300.49388,221.41753 318.37188,206.97394 318.37188,206.97394 C 319.2072,206.29909 319.56463,205.63506 319.17704,205.48324 C 319.17704,205.48324 311.44233,202.45361 311.44233,202.45361 C 311.07717,202.31058 310.12278,202.71434 309.29892,203.3606 C 309.29892,203.3606 291.6901,217.17374 291.6901,217.17374 C 290.79969,217.87223 290.3631,218.57498 290.71507,218.74754 C 290.71507,218.74754 298.1804,222.40777 298.1804,222.40777 C 298.55498,222.59143 299.58864,222.1489 300.49388,221.41753 C 300.49388,221.41753 300.49388,221.41753 300.49388,221.41753"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 258.97104,224.63939 C 258.97104,224.63939 251.83463,221.23656 251.83463,221.23656 C 251.14159,220.90611 250.14534,220.95426 249.59505,221.34461 C 249.59505,221.34461 243.94919,225.34942 243.94919,225.34942 C 243.36824,225.76151 243.45494,226.38105 244.14978,226.73848 C 244.14978,226.73848 251.31231,230.42301 251.31231,230.42301 C 252.05284,230.80395 253.12041,230.75512 253.69927,230.31357 C 253.69927,230.31357 259.31886,226.02706 259.31886,226.02706 C 259.86601,225.60971 259.70806,224.99085 258.97104,224.63939 C 258.97104,224.63939 258.97104,224.63939 258.97104,224.63939"
+ id="path13125"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 245.03115,264.95865 C 245.03115,264.95865 236.89775,261.02915 236.89775,261.02915 C 236.29828,260.73954 235.41666,260.81767 234.92021,261.2046 C 234.92021,261.2046 228.15537,266.47697 228.15537,266.47697 C 227.65036,266.87057 227.72859,267.42473 228.33161,267.71924 C 228.33161,267.71924 236.5135,271.71529 236.5135,271.71529 C 237.12168,272.01232 238.01565,271.93037 238.51705,271.53179 C 238.51705,271.53179 245.23339,266.19289 245.23339,266.19289 C 245.7263,265.80109 245.63571,265.25074 245.03115,264.95865 C 245.03115,264.95865 245.03115,264.95865 245.03115,264.95865"
+ id="path13127"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 241.3425,254.88757 C 241.3425,254.88757 247.17841,250.38791 247.17841,250.38791 C 247.6407,250.03146 247.43669,249.46639 246.72219,249.12079 C 246.72219,249.12079 237.84809,244.82838 237.84809,244.82838 C 237.14306,244.48737 236.20078,244.49428 235.73414,244.84402 C 235.73414,244.84402 229.84385,249.25863 229.84385,249.25863 C 229.36826,249.61507 229.55538,250.18212 230.26467,250.52985 C 230.26467,250.52985 239.19316,254.90731 239.19316,254.90731 C 239.9121,255.25978 240.87126,255.2509 241.3425,254.88757 C 241.3425,254.88757 241.3425,254.88757 241.3425,254.88757"
+ id="path13129"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path13131"
+ d="M 250.09625,248.10772 C 250.09625,248.10772 256.04021,243.39795 256.04021,243.39795 C 256.61443,242.94295 256.40961,242.26587 255.58606,241.87803 C 255.58606,241.87803 247.4695,238.05567 247.4695,238.05567 C 246.66725,237.67787 245.54243,237.71942 244.94236,238.15046 C 244.94236,238.15046 238.73449,242.60981 238.73449,242.60981 C 238.09034,243.07251 238.23366,243.77042 239.06151,244.17275 C 239.06151,244.17275 247.44196,248.2456 247.44196,248.2456 C 248.29278,248.65909 249.47914,248.5967 250.09625,248.10772 C 250.09625,248.10772 250.09625,248.10772 250.09625,248.10772"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path13133"
+ d="M 270.78129,244.1004 C 270.78129,244.1004 263.16585,240.54998 263.16585,240.54998 C 262.59905,240.28573 261.81284,240.33065 261.40189,240.65211 C 261.40189,240.65211 255.67209,245.13428 255.67209,245.13428 C 255.23437,245.47666 255.35686,245.97255 255.94801,246.24454 C 255.94801,246.24454 263.88891,249.89826 263.88891,249.89826 C 264.4733,250.16714 265.27704,250.1004 265.6898,249.75019 C 265.6898,249.75019 271.09419,245.16472 271.09419,245.16472 C 271.48189,244.83578 271.34185,244.36173 270.78129,244.1004 C 270.78129,244.1004 270.78129,244.1004 270.78129,244.1004"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path13135"
+ d="M 279.36283,237.13131 C 279.36283,237.13131 271.95158,233.79368 271.95158,233.79368 C 271.36993,233.53174 270.52181,233.61628 270.04782,233.98311 C 270.04782,233.98311 264.05529,238.62092 264.05529,238.62092 C 263.57067,238.99597 263.64455,239.51827 264.22306,239.79213 C 264.22306,239.79213 271.59655,243.28243 271.59655,243.28243 C 272.19767,243.56699 273.0762,243.48424 273.56398,243.09674 C 273.56398,243.09674 279.59427,238.30625 279.59427,238.30625 C 280.07112,237.92743 279.96688,237.40335 279.36283,237.13131 C 279.36283,237.13131 279.36283,237.13131 279.36283,237.13131"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 259.13878,241.01984 C 259.13878,241.01984 264.94427,236.50262 264.94427,236.50262 C 265.5183,236.05597 265.27718,235.39329 264.41129,235.01866 C 264.41129,235.01866 256.13903,231.43971 256.13903,231.43971 C 255.34632,231.09675 254.26614,231.15807 253.71044,231.57558 C 253.71044,231.57558 248.09408,235.79517 248.09408,235.79517 C 247.52482,236.22286 247.6843,236.86458 248.45835,237.23578 C 248.45835,237.23578 256.54144,241.11225 256.54144,241.11225 C 257.38813,241.51828 258.54995,241.47801 259.13878,241.01984 C 259.13878,241.01984 259.13878,241.01984 259.13878,241.01984"
+ id="path14377"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 232.79455,261.43519 C 232.79455,261.43519 238.72958,256.85909 238.72958,256.85909 C 239.16465,256.52365 238.9726,255.99183 238.3001,255.66653 C 238.3001,255.66653 229.27525,251.30123 229.27525,251.30123 C 228.61176,250.98029 227.72493,250.98679 227.28579,251.31591 C 227.28579,251.31591 221.29544,255.80552 221.29544,255.80552 C 220.84778,256.14104 221.02387,256.67471 221.69138,257.00198 C 221.69138,257.00198 230.77154,261.45377 230.77154,261.45377 C 231.44822,261.78553 232.35098,261.77719 232.79455,261.43519 C 232.79455,261.43519 232.79455,261.43519 232.79455,261.43519"
+ id="path14379"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 254.17375,257.48652 C 254.17375,257.48652 246.32963,253.73115 246.32963,253.73115 C 245.70901,253.43402 244.79483,253.51721 244.27828,253.91779 C 244.27828,253.91779 237.75243,258.97869 237.75243,258.97869 C 237.22504,259.38768 237.29958,259.96347 237.92117,260.26957 C 237.92117,260.26957 245.77862,264.13893 245.77862,264.13893 C 246.41397,264.45181 247.35058,264.36687 247.87695,263.94859 C 247.87695,263.94859 254.38946,258.77374 254.38946,258.77374 C 254.90487,258.36419 254.80792,257.79015 254.17375,257.48652 C 254.17375,257.48652 254.17375,257.48652 254.17375,257.48652"
+ id="path14381"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path14383"
+ d="M 233.03678,243.79425 C 233.03678,243.79425 225.48646,240.13918 225.48646,240.13918 C 224.74342,239.77949 223.69299,239.82194 223.12841,240.23388 C 223.12841,240.23388 217.44731,244.37905 217.44731,244.37905 C 216.874,244.79736 217.00415,245.4333 217.742,245.80545 C 217.742,245.80545 225.24071,249.58767 225.24071,249.58767 C 226.00503,249.97318 227.0886,249.93684 227.66722,249.50562 C 227.66722,249.50562 233.39989,245.23329 233.39989,245.23329 C 233.96951,244.80878 233.80621,244.16674 233.03678,243.79425 C 233.03678,243.79425 233.03678,243.79425 233.03678,243.79425"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 282.03015,224.70872 C 282.03015,224.70872 287.9774,220.08364 287.9774,220.08364 C 288.56519,219.62653 289.56121,219.51344 290.21268,219.82947 C 290.21268,219.82947 296.76597,223.00851 296.76597,223.00851 C 297.42707,223.32921 297.49209,223.96249 296.90969,224.429 C 296.90969,224.429 291.01609,229.14982 291.01609,229.14982 C 290.41797,229.62893 289.39806,229.74916 288.73146,229.41875 C 288.73146,229.41875 282.12452,226.14398 282.12452,226.14398 C 281.4678,225.81845 281.42665,225.17805 282.03015,224.70872 C 282.03015,224.70872 282.03015,224.70872 282.03015,224.70872"
+ id="path14385"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path20314"
+ d="M 274.59176,213.04701 C 274.59176,213.04701 267.63301,209.8841 267.63301,209.8841 C 266.9305,209.56479 265.98277,209.58635 265.5079,209.93372 C 265.5079,209.93372 260.69581,213.4537 260.69581,213.4537 C 260.20677,213.81142 260.39277,214.35936 261.11308,214.68093 C 261.11308,214.68093 268.24694,217.86572 268.24694,217.86572 C 268.95551,218.18206 269.90543,218.14595 270.37662,217.78604 C 270.37662,217.78604 275.0136,214.24417 275.0136,214.24417 C 275.47126,213.89461 275.28303,213.36122 274.59176,213.04701 C 274.59176,213.04701 274.59176,213.04701 274.59176,213.04701"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 292.00448,215.55279 C 292.00448,215.55279 296.3664,212.1569 296.3664,212.1569 C 296.79902,211.82008 296.4902,211.27517 295.67813,210.9361 C 295.67813,210.9361 287.77738,207.63715 287.77738,207.63715 C 287.00644,207.31524 286.04433,207.31631 285.61635,207.63866 C 285.61635,207.63866 281.30257,210.88766 281.30257,210.88766 C 280.86653,211.21606 281.12901,211.75032 281.89503,212.08646 C 281.89503,212.08646 289.74764,215.53227 289.74764,215.53227 C 290.55499,215.88655 291.56345,215.89614 292.00448,215.55279 C 292.00448,215.55279 292.00448,215.55279 292.00448,215.55279"
+ id="path20316"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path20318"
+ d="M 284.72744,221.17105 C 284.72744,221.17105 289.45459,217.54272 289.45459,217.54272 C 289.926,217.18089 289.66619,216.61851 288.87179,216.28131 C 288.87179,216.28131 280.90373,212.899 280.90373,212.899 C 280.10221,212.55875 279.07175,212.57593 278.59356,212.93801 C 278.59356,212.93801 273.79834,216.56885 273.79834,216.56885 C 273.31611,216.93397 273.57888,217.50206 274.38726,217.84205 C 274.38726,217.84205 282.42339,221.22188 282.42339,221.22188 C 283.22457,221.55883 284.25207,221.53592 284.72744,221.17105 C 284.72744,221.17105 284.72744,221.17105 284.72744,221.17105"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 280.70619,208.18882 C 280.70619,208.18882 273.65334,205.39325 273.65334,205.39325 C 272.99267,205.13139 272.16292,205.14273 271.78475,205.41678 C 271.78475,205.41678 267.9355,208.20633 267.9355,208.20633 C 267.54254,208.4911 267.73876,208.95315 268.38364,209.24454 C 268.38364,209.24454 275.27945,212.36039 275.27945,212.36039 C 276.01926,212.69466 276.95281,212.71002 277.36247,212.39198 C 277.36247,212.39198 281.36853,209.28183 281.36853,209.28183 C 281.76145,208.97678 281.46158,208.48822 280.70619,208.18882 C 280.70619,208.18882 280.70619,208.18882 280.70619,208.18882"
+ id="path20320"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path20322"
+ d="M 267.13462,218.61017 C 267.13462,218.61017 260.04553,215.39646 260.04553,215.39646 C 259.35688,215.08427 258.39121,215.12387 257.87608,215.4844 C 257.87608,215.4844 252.67496,219.12445 252.67496,219.12445 C 252.14829,219.49305 252.26711,220.05491 252.94569,220.38521 C 252.94569,220.38521 259.93387,223.78674 259.93387,223.78674 C 260.65566,224.13807 261.67299,224.1096 262.21011,223.72182 C 262.21011,223.72182 267.5121,219.8939 267.5121,219.8939 C 268.03699,219.51494 267.86652,218.94196 267.13462,218.61017 C 267.13462,218.61017 267.13462,218.61017 267.13462,218.61017"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 287.7354,230.25946 C 287.7354,230.25946 281.08316,227.00351 281.08316,227.00351 C 280.40678,226.67245 279.40568,226.75692 278.83891,227.19481 C 278.83891,227.19481 273.09436,231.63291 273.09436,231.63291 C 272.51043,232.08403 272.60418,232.71336 273.30418,233.04198 C 273.30418,233.04198 280.18673,236.27314 280.18673,236.27314 C 280.86539,236.59174 281.86259,236.48569 282.42295,236.03722 C 282.42295,236.03722 287.93718,231.62391 287.93718,231.62391 C 288.48138,231.18834 288.39153,230.58062 287.7354,230.25946 C 287.7354,230.25946 287.7354,230.25946 287.7354,230.25946"
+ id="path20324"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path20326"
+ d="M 267.94729,234.14015 C 267.94729,234.14015 273.40476,229.94747 273.40476,229.94747 C 273.94662,229.5312 273.71505,228.90956 272.88832,228.55398 C 272.88832,228.55398 264.75456,225.0556 264.75456,225.0556 C 263.95198,224.71041 262.87291,224.75882 262.33246,225.16387 C 262.33246,225.16387 256.88991,229.24286 256.88991,229.24286 C 256.34026,229.6548 256.54039,230.27309 257.34135,230.62945 C 257.34135,230.62945 265.46021,234.24152 265.46021,234.24152 C 266.28553,234.60871 267.39604,234.56364 267.94729,234.14015 C 267.94729,234.14015 267.94729,234.14015 267.94729,234.14015"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path21282"
+ d="M 276.32923,227.66222 C 276.32923,227.66222 281.90001,223.35623 281.90001,223.35623 C 282.4517,222.9298 282.23314,222.31013 281.41303,221.96694 C 281.41303,221.96694 273.34754,218.59182 273.34754,218.59182 C 272.55203,218.25892 271.46937,218.32422 270.91711,218.73813 C 270.91711,218.73813 265.34181,222.91665 265.34181,222.91665 C 264.77733,223.33971 264.96112,223.95828 265.75691,224.30368 C 265.75691,224.30368 273.82693,227.80624 273.82693,227.80624 C 274.64767,228.16246 275.7651,228.09826 276.32923,227.66222 C 276.32923,227.66222 276.32923,227.66222 276.32923,227.66222"
+ style="opacity:0.99720004;fill:#808080;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <g
+ transform="matrix(1.0228007,0,0,1.0228007,-6.1273429,-1.9735657)"
+ id="g5349">
+ <path
+ id="path3281"
+ d="M 200.53013,313.0503 C 200.53013,313.0503 193.03458,319.37147 193.03458,319.37147 C 192.65485,319.6917 192.0145,319.75862 191.59935,319.52112 C 191.59935,319.52112 183.2867,314.76558 183.2867,314.76558 C 182.87292,314.52886 182.85139,314.08409 183.23786,313.76871 C 183.23786,313.76871 190.86675,307.54312 190.86675,307.54312 C 191.24112,307.23761 191.86986,307.1787 192.27701,307.41066 C 192.27701,307.41066 200.45632,312.07061 200.45632,312.07061 C 200.86479,312.30333 200.89796,312.7401 200.53013,313.0503 C 200.53013,313.0503 200.53013,313.0503 200.53013,313.0503"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3283"
+ d="M 172.41739,306.03622 C 172.41739,306.03622 188.0277,294.08595 188.0277,294.08595 C 189.11795,293.25133 190.41897,292.82031 190.95268,293.11384 C 190.95268,293.11384 198.19106,297.09485 198.19106,297.09485 C 198.72888,297.39065 198.31537,298.31501 197.2562,299.17331 C 197.2562,299.17331 182.08669,311.46584 182.08669,311.46584 C 180.89616,312.43058 179.47079,312.95427 178.90005,312.63295 C 178.90005,312.63295 171.22074,308.30947 171.22074,308.30947 C 170.65468,307.99077 171.1926,306.97384 172.41739,306.03622 C 172.41739,306.03622 172.41739,306.03622 172.41739,306.03622"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3285"
+ d="M 183.71685,293.09242 C 183.71685,293.09242 175.21974,288.61823 175.21974,288.61823 C 174.62141,288.30317 173.39049,288.60803 172.45631,289.30319 C 172.45631,289.30319 159.05702,299.27405 159.05702,299.27405 C 158.07838,300.0023 157.77029,300.8596 158.36997,301.19473 C 158.36997,301.19473 166.88944,305.95582 166.88944,305.95582 C 167.50572,306.30023 168.79179,305.97286 169.76917,305.22339 C 169.76917,305.22339 183.14605,294.96565 183.14605,294.96565 C 184.07833,294.25076 184.33129,293.41596 183.71685,293.09242 C 183.71685,293.09242 183.71685,293.09242 183.71685,293.09242"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3287"
+ d="M 166.83475,289.12754 C 166.83475,289.12754 159.13844,284.98242 159.13844,284.98242 C 158.69381,284.74294 157.84841,284.90019 157.24056,285.33581 C 157.24056,285.33581 146.5932,292.96648 146.5932,292.96648 C 145.95049,293.4271 145.7912,294.00445 146.23859,294.2601 C 146.23859,294.2601 153.9866,298.68753 153.9866,298.68753 C 154.44898,298.95174 155.33851,298.77896 155.97843,298.30106 C 155.97843,298.30106 166.57405,290.38811 166.57405,290.38811 C 167.17862,289.93661 167.2938,289.37478 166.83475,289.12754 C 166.83475,289.12754 166.83475,289.12754 166.83475,289.12754"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3289"
+ d="M 151.36095,285.65566 C 151.36095,285.65566 143.84889,281.51108 143.84889,281.51108 C 143.47842,281.30668 142.86541,281.36856 142.47405,281.64966 C 142.47405,281.64966 134.61675,287.29335 134.61675,287.29335 C 134.22459,287.57503 134.20331,287.96918 134.56941,288.17726 C 134.56941,288.17726 141.993,292.39653 141.993,292.39653 C 142.36721,292.60921 142.98804,292.55081 143.38462,292.2654 C 143.38462,292.2654 151.33041,286.54701 151.33041,286.54701 C 151.72616,286.2622 151.73961,285.86457 151.36095,285.65566 C 151.36095,285.65566 151.36095,285.65566 151.36095,285.65566"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3291"
+ d="M 210.70247,305.77557 C 210.70247,305.77557 204.93036,310.57929 204.93036,310.57929 C 204.34435,311.06699 203.27394,311.11934 202.52773,310.69333 C 202.52773,310.69333 194.82772,306.29731 194.82772,306.29731 C 194.03081,305.84234 193.88921,305.07052 194.51315,304.57044 C 194.51315,304.57044 200.65538,299.64763 200.65538,299.64763 C 201.26179,299.16161 202.36255,299.14928 203.12074,299.61631 C 203.12074,299.61631 210.45071,304.13144 210.45071,304.13144 C 211.16146,304.56926 211.27265,305.30104 210.70247,305.77557 C 210.70247,305.77557 210.70247,305.77557 210.70247,305.77557"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3293"
+ d="M 220.36679,297.64972 C 220.36679,297.64972 214.19821,302.83693 214.19821,302.83693 C 213.8071,303.16581 213.0629,303.16632 212.53329,302.83934 C 212.53329,302.83934 204.47426,297.86377 204.47426,297.86377 C 203.99682,297.56901 203.91878,297.08754 204.2961,296.78318 C 204.2961,296.78318 210.25274,291.97831 210.25274,291.97831 C 210.61877,291.68306 211.30575,291.66386 211.7962,291.93623 C 211.7962,291.93623 220.06723,296.5296 220.06723,296.5296 C 220.61026,296.83118 220.74549,297.33126 220.36679,297.64972 C 220.36679,297.64972 220.36679,297.64972 220.36679,297.64972"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3295"
+ d="M 229.27683,290.15464 C 229.27683,290.15464 223.76946,294.79471 223.76946,294.79471 C 223.28503,295.20286 222.36392,295.23289 221.70465,294.86121 C 221.70465,294.86121 214.09874,290.57325 214.09874,290.57325 C 213.43481,290.19895 213.29956,289.57104 213.79504,289.16623 C 213.79504,289.16623 219.4277,284.56425 219.4277,284.56425 C 219.91221,284.1684 220.82757,284.14902 221.48054,284.51999 C 221.48054,284.51999 228.96116,288.76985 228.96116,288.76985 C 229.60961,289.13825 229.75059,289.75549 229.27683,290.15464 C 229.27683,290.15464 229.27683,290.15464 229.27683,290.15464"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3297"
+ d="M 207.6366,289.76045 C 207.6366,289.76045 200.20453,285.97175 200.20453,285.97175 C 199.75388,285.74202 199.11315,285.78115 198.76662,286.05878 C 198.76662,286.05878 193.21867,290.50362 193.21867,290.50362 C 192.87292,290.78062 192.94685,291.19499 193.38567,291.43343 C 193.38567,291.43343 200.62246,295.36556 200.62246,295.36556 C 201.08703,295.61798 201.75028,295.59166 202.10819,295.30573 C 202.10819,295.30573 207.85144,290.71744 207.85144,290.71744 C 208.21018,290.43084 208.11372,290.00367 207.6366,289.76045 C 207.6366,289.76045 207.6366,289.76045 207.6366,289.76045"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3299"
+ d="M 193.30538,285.7839 C 193.30538,285.7839 185.22052,281.47582 185.22052,281.47582 C 184.58295,281.13609 183.70561,281.13742 183.25124,281.47882 C 183.25124,281.47882 177.48561,285.81085 177.48561,285.81085 C 177.01761,286.16248 177.15516,286.7287 177.79623,287.08041 C 177.79623,287.08041 185.92745,291.54147 185.92745,291.54147 C 186.5872,291.90343 187.49396,291.90165 187.95831,291.53752 C 187.95831,291.53752 193.67756,287.05251 193.67756,287.05251 C 194.12816,286.69915 193.9612,286.13336 193.30538,285.7839 C 193.30538,285.7839 193.30538,285.7839 193.30538,285.7839"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3301"
+ d="M 153.65825,274.40909 C 153.65825,274.40909 161.75797,278.66326 161.75797,278.66326 C 162.02482,278.80341 162.05943,279.04844 161.83501,279.21257 C 161.83501,279.21257 154.75107,284.39353 154.75107,284.39353 C 154.52039,284.56224 154.12135,284.5797 153.85694,284.43276 C 153.85694,284.43276 145.83383,279.97431 145.83383,279.97431 C 145.58269,279.83475 145.56457,279.59204 145.79266,279.43005 C 145.79266,279.43005 152.79999,274.45338 152.79999,274.45338 C 153.02206,274.29566 153.40462,274.27588 153.65825,274.40909 C 153.65825,274.40909 153.65825,274.40909 153.65825,274.40909"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3303"
+ d="M 176.68036,282.15173 C 176.68036,282.15173 169.08774,278.13438 169.08774,278.13438 C 168.53136,277.83999 167.74128,277.85841 167.31522,278.1756 C 167.31522,278.1756 161.51878,282.49085 161.51878,282.49085 C 161.08675,282.81248 161.18562,283.31335 161.7415,283.61396 C 161.7415,283.61396 169.32801,287.71649 169.32801,287.71649 C 169.89523,288.02323 170.70097,288.00619 171.1335,287.67818 C 171.1335,287.67818 176.93604,283.27774 176.93604,283.27774 C 177.36252,282.95432 177.24799,282.45207 176.68036,282.15173 C 176.68036,282.15173 176.68036,282.15173 176.68036,282.15173"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3305"
+ d="M 186.05575,275.08382 C 186.05575,275.08382 178.66837,271.26624 178.66837,271.26624 C 178.14275,270.99462 177.38016,271.01579 176.95654,271.31482 C 176.95654,271.31482 170.80827,275.65494 170.80827,275.65494 C 170.35386,275.97571 170.42595,276.46372 170.9721,276.74789 C 170.9721,276.74789 178.64907,280.74215 178.64907,280.74215 C 179.19855,281.02804 179.99123,280.98835 180.42429,280.65448 C 180.42429,280.65448 186.28302,276.1377 186.28302,276.1377 C 186.68663,275.82653 186.58444,275.35703 186.05575,275.08382 C 186.05575,275.08382 186.05575,275.08382 186.05575,275.08382"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3307"
+ d="M 163.51597,267.87954 C 163.51597,267.87954 171.1646,271.91896 171.1646,271.91896 C 171.53604,272.11513 171.58651,272.4514 171.2774,272.67324 C 171.2774,272.67324 164.82134,277.30652 164.82134,277.30652 C 164.50235,277.53544 163.94045,277.55958 163.56185,277.36032 C 163.56185,277.36032 155.76574,273.25703 155.76574,273.25703 C 155.38595,273.05714 155.34321,272.7142 155.66949,272.48842 C 155.66949,272.48842 162.27303,267.91901 162.27303,267.91901 C 162.5892,267.70024 163.14337,267.68276 163.51597,267.87954 C 163.51597,267.87954 163.51597,267.87954 163.51597,267.87954"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3309"
+ d="M 173.08132,261.26965 C 173.08132,261.26965 180.42033,265.06231 180.42033,265.06231 C 180.84108,265.27975 180.901,265.65731 180.55405,265.90902 C 180.55405,265.90902 174.39819,270.3752 174.39819,270.3752 C 174.04312,270.63281 173.41533,270.66166 172.99122,270.43971 C 172.99122,270.43971 165.59423,266.56865 165.59423,266.56865 C 165.17482,266.34916 165.12621,265.96859 165.4846,265.71552 C 165.4846,265.71552 171.69844,261.32774 171.69844,261.32774 C 172.04868,261.08043 172.66517,261.05459 173.08132,261.26965 C 173.08132,261.26965 173.08132,261.26965 173.08132,261.26965"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3311"
+ d="M 183.15808,254.05968 C 183.15808,254.05968 190.5411,257.89809 190.5411,257.89809 C 190.90119,258.0853 190.9368,258.42917 190.61983,258.66983 C 190.61983,258.66983 183.84308,263.81508 183.84308,263.81508 C 183.50031,264.07534 182.92132,264.12739 182.54615,263.93097 C 182.54615,263.93097 174.85492,259.90428 174.85492,259.90428 C 174.48192,259.709 174.47113,259.34932 174.82945,259.09862 C 174.82945,259.09862 181.91436,254.14161 181.91436,254.14161 C 182.24579,253.90973 182.79998,253.8735 183.15808,254.05968 C 183.15808,254.05968 183.15808,254.05968 183.15808,254.05968"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3313"
+ d="M 195.50846,268.00414 C 195.50846,268.00414 187.92237,264.08387 187.92237,264.08387 C 187.38263,263.80495 186.5995,263.82667 186.16449,264.13375 C 186.16449,264.13375 179.85083,268.59062 179.85083,268.59062 C 179.38419,268.92002 179.45825,269.42118 180.01907,269.71297 C 180.01907,269.71297 187.90254,273.81468 187.90254,273.81468 C 188.4668,274.10826 189.28081,274.0675 189.72552,273.72465 C 189.72552,273.72465 195.74185,269.08637 195.74185,269.08637 C 196.15632,268.76683 196.05137,268.2847 195.50846,268.00414 C 195.50846,268.00414 195.50846,268.00414 195.50846,268.00414"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3315"
+ d="M 202.55006,278.55525 C 202.55006,278.55525 194.52053,274.43157 194.52053,274.43157 C 193.89847,274.1121 193.03474,274.13023 192.58051,274.47152 C 192.58051,274.47152 186.82178,278.79836 186.82178,278.79836 C 186.35477,279.14926 186.47106,279.70327 187.086,280.04131 C 187.086,280.04131 195.02775,284.40711 195.02775,284.40711 C 195.68386,284.76779 196.59706,284.76041 197.07144,284.38968 C 197.07144,284.38968 202.9179,279.82067 202.9179,279.82067 C 203.3788,279.46048 203.21306,278.89574 202.55006,278.55525 C 202.55006,278.55525 202.55006,278.55525 202.55006,278.55525"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path3317"
+ d="M 217.28268,282.30723 C 217.28268,282.30723 209.76798,278.51506 209.76798,278.51506 C 209.31861,278.28829 208.66038,278.33252 208.29049,278.6148 C 208.29049,278.6148 201.99168,283.42172 201.99168,283.42172 C 201.5992,283.72125 201.65194,284.15497 202.11173,284.39356 C 202.11173,284.39356 209.80365,288.38505 209.80365,288.38505 C 210.27451,288.62939 210.96221,288.57431 211.3438,288.26224 C 211.3438,288.26224 217.46536,283.25603 217.46536,283.25603 C 217.82471,282.96216 217.7425,282.53927 217.28268,282.30723 C 217.28268,282.30723 217.28268,282.30723 217.28268,282.30723"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5259"
+ sodipodi:nodetypes="cccccccccc"
+ d="M 223.6315,280.9685 C 223.6315,280.9685 271.20382,242.80623 271.20382,242.80623 C 271.77183,242.35446 272.94396,242.34509 273.8347,242.78481 C 273.8347,242.78481 280.16259,245.8893 280.16259,245.8893 C 281.06675,246.33566 281.34594,247.06729 280.78574,247.53016 C 280.78574,247.53016 233.93323,286.78539 233.93323,286.78539 C 233.23622,287.36129 231.89705,287.39044 230.93425,286.85016 C 230.93425,286.85016 224.06489,282.94036 224.06489,282.94036 C 223.11807,282.40904 222.92637,281.52934 223.6315,280.9685 C 223.6315,280.9685 223.6315,280.9685 223.6315,280.9685"
+ style="opacity:1;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.69999999;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5261"
+ d="M 227.03565,274.61509 C 227.03565,274.61509 219.57159,270.89543 219.57159,270.89543 C 219.13842,270.67957 218.48938,270.73732 218.1151,271.02521 C 218.1151,271.02521 211.61304,276.02653 211.61304,276.02653 C 211.22381,276.32593 211.26193,276.7481 211.69984,276.97279 C 211.69984,276.97279 219.24737,280.84554 219.24737,280.84554 C 219.69565,281.07556 220.36702,281.012 220.75135,280.70336 C 220.75135,280.70336 227.16991,275.54895 227.16991,275.54895 C 227.53929,275.25232 227.47886,274.83596 227.03565,274.61509 C 227.03565,274.61509 227.03565,274.61509 227.03565,274.61509"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5263"
+ d="M 192.51964,247.35677 C 192.51964,247.35677 199.78325,251.31635 199.78325,251.31635 C 200.08373,251.48015 200.10518,251.76671 199.83193,251.95915 C 199.83193,251.95915 193.39598,256.49168 193.39598,256.49168 C 193.12338,256.68366 192.65687,256.71094 192.34938,256.55257 C 192.34938,256.55257 184.91676,252.72442 184.91676,252.72442 C 184.59365,252.55801 184.55824,252.26477 184.83799,252.06723 C 184.83799,252.06723 191.44296,247.40326 191.44296,247.40326 C 191.7234,247.20524 192.20387,247.18464 192.51964,247.35677 C 192.51964,247.35677 192.51964,247.35677 192.51964,247.35677"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5265"
+ d="M 204.95758,260.67876 C 204.95758,260.67876 197.45088,256.83357 197.45088,256.83357 C 196.91888,256.56107 196.14744,256.58436 195.71989,256.88617 C 195.71989,256.88617 189.62606,261.18786 189.62606,261.18786 C 189.18381,261.50005 189.26067,261.97752 189.79977,262.25801 C 189.79977,262.25801 197.4078,266.21641 197.4078,266.21641 C 197.95451,266.50085 198.7459,266.47153 199.18087,266.15108 C 199.18087,266.15108 205.17336,261.73618 205.17336,261.73618 C 205.59375,261.42646 205.49693,260.95503 204.95758,260.67876 C 204.95758,260.67876 204.95758,260.67876 204.95758,260.67876"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5267"
+ d="M 203.42735,267.20908 C 203.42735,267.20908 212.2333,271.70369 212.2333,271.70369 C 212.6248,271.90351 212.71338,272.23708 212.43163,272.45164 C 212.43163,272.45164 206.02839,277.32796 206.02839,277.32796 C 205.74282,277.54543 205.19609,277.55776 204.8028,277.35556 C 204.8028,277.35556 195.957,272.80759 195.957,272.80759 C 195.56658,272.60686 195.48379,272.27205 195.77113,272.05697 C 195.77113,272.05697 202.21422,267.23402 202.21422,267.23402 C 202.49773,267.02179 203.03868,267.0107 203.42735,267.20908 C 203.42735,267.20908 203.42735,267.20908 203.42735,267.20908"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5269"
+ d="M 212.72962,260.6903 C 212.72962,260.6903 220.81856,264.71792 220.81856,264.71792 C 221.40722,265.01103 221.56351,265.49233 221.1669,265.79697 C 221.1669,265.79697 215.52012,270.13427 215.52012,270.13427 C 215.11075,270.44871 214.30434,270.45549 213.7142,270.1496 C 213.7142,270.1496 205.60787,265.94776 205.60787,265.94776 C 205.04085,265.65385 204.91653,265.17445 205.32701,264.87276 C 205.32701,264.87276 210.99121,260.70967 210.99121,260.70967 C 211.38919,260.41716 212.16362,260.40847 212.72962,260.6903 C 212.72962,260.6903 212.72962,260.6903 212.72962,260.6903"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5271"
+ d="M 235.38208,267.94652 C 235.38208,267.94652 228.36195,264.54302 228.36195,264.54302 C 227.7581,264.25027 226.91755,264.28848 226.47592,264.62855 C 226.47592,264.62855 221.36693,268.56268 221.36693,268.56268 C 220.91972,268.90705 221.04356,269.42537 221.64599,269.72502 C 221.64599,269.72502 228.65018,273.2089 228.65018,273.2089 C 229.26637,273.51538 230.12476,273.47935 230.5734,273.12791 C 230.5734,273.12791 235.69833,269.1134 235.69833,269.1134 C 236.14129,268.76642 235.99961,268.24591 235.38208,267.94652 C 235.38208,267.94652 235.38208,267.94652 235.38208,267.94652"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5273"
+ d="M 202.3439,240.55011 C 202.3439,240.55011 209.40685,244.3565 209.40685,244.3565 C 209.77966,244.55741 209.79685,244.91929 209.44513,245.16789 C 209.44513,245.16789 202.71836,249.92236 202.71836,249.92236 C 202.36384,250.17294 201.77847,250.21096 201.40617,250.00761 C 201.40617,250.00761 194.3529,246.15501 194.3529,246.15501 C 193.98466,245.95386 193.97344,245.59217 194.32745,245.34403 C 194.32745,245.34403 201.04453,240.63577 201.04453,240.63577 C 201.39575,240.38958 201.97514,240.35138 202.3439,240.55011 C 202.3439,240.55011 202.3439,240.55011 202.3439,240.55011"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5275"
+ d="M 214.95641,253.88523 C 214.95641,253.88523 207.20865,250.11064 207.20865,250.11064 C 206.78058,249.90209 206.15223,249.93501 205.79811,250.18412 C 205.79811,250.18412 199.5121,254.60606 199.5121,254.60606 C 199.14935,254.86124 199.19499,255.24389 199.61614,255.46439 C 199.61614,255.46439 207.24189,259.45703 207.24189,259.45703 C 207.69079,259.69206 208.35153,259.66596 208.72148,259.39808 C 208.72148,259.39808 215.12948,254.75806 215.12948,254.75806 C 215.49031,254.49678 215.41229,254.10733 214.95641,253.88523 C 214.95641,253.88523 214.95641,253.88523 214.95641,253.88523"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5277"
+ d="M 221.9033,253.92205 C 221.9033,253.92205 229.74607,257.77376 229.74607,257.77376 C 230.38047,258.08533 230.53912,258.61203 230.09991,258.95492 C 230.09991,258.95492 224.52409,263.30793 224.52409,263.30793 C 224.07129,263.66142 223.1901,263.68688 222.55025,263.36479 C 222.55025,263.36479 214.64187,259.38384 214.64187,259.38384 C 214.01663,259.0691 213.88352,258.53947 214.34155,258.19654 C 214.34155,258.19654 219.983,253.97277 219.983,253.97277 C 220.42747,253.64 221.28312,253.61747 221.9033,253.92205 C 221.9033,253.92205 221.9033,253.92205 221.9033,253.92205"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 244.75785,260.58731 C 244.75785,260.58731 237.5872,257.12295 237.5872,257.12295 C 237.05869,256.86761 236.28144,256.9365 235.84374,257.27763 C 235.84374,257.27763 229.87966,261.92591 229.87966,261.92591 C 229.43444,262.2729 229.5034,262.76148 230.03504,263.02113 C 230.03504,263.02113 237.24843,266.54415 237.24843,266.54415 C 237.78463,266.80603 238.57278,266.73378 239.01483,266.38238 C 239.01483,266.38238 244.93616,261.67544 244.93616,261.67544 C 245.3707,261.33002 245.29084,260.84482 244.75785,260.58731 C 244.75785,260.58731 244.75785,260.58731 244.75785,260.58731"
+ id="path5279"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 233.2943,256.416 C 233.2943,256.416 238.45564,252.43646 238.45564,252.43646 C 238.83398,252.14474 238.66697,251.68224 238.08213,251.39936 C 238.08213,251.39936 230.23378,247.60312 230.23378,247.60312 C 229.65678,247.32402 228.88557,247.32967 228.50367,247.6159 C 228.50367,247.6159 223.29424,251.52023 223.29424,251.52023 C 222.90493,251.812 223.05807,252.27611 223.63856,252.56071 C 223.63856,252.56071 231.535,256.43217 231.535,256.43217 C 232.12348,256.72068 232.90856,256.71342 233.2943,256.416 C 233.2943,256.416 233.2943,256.416 233.2943,256.416"
+ id="path5281"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5283"
+ d="M 224.84883,246.55597 C 224.84883,246.55597 217.52734,242.94323 217.52734,242.94323 C 216.98183,242.67405 216.15475,242.73355 215.67283,243.07723 C 215.67283,243.07723 209.10533,247.76083 209.10533,247.76083 C 208.61499,248.11051 208.66694,248.60923 209.22188,248.87843 C 209.22188,248.87843 216.66948,252.49124 216.66948,252.49124 C 217.21707,252.75687 218.04508,252.68874 218.52598,252.33907 C 218.52598,252.33907 224.96738,247.65541 224.96738,247.65541 C 225.44008,247.3117 225.38717,246.82161 224.84883,246.55597 C 224.84883,246.55597 224.84883,246.55597 224.84883,246.55597"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5285"
+ d="M 211.2176,234.55068 C 211.2176,234.55068 218.13924,237.73238 218.13924,237.73238 C 218.66737,237.97515 218.77598,238.41021 218.37697,238.70684 C 218.37697,238.70684 212.62031,242.9864 212.62031,242.9864 C 212.1974,243.3008 211.43997,243.33022 210.928,243.05365 C 210.928,243.05365 204.23311,239.43697 204.23311,239.43697 C 203.78717,239.19607 203.75848,238.77609 204.16385,238.4943 C 204.16385,238.4943 209.694,234.65 209.694,234.65 C 210.07817,234.38294 210.75554,234.33829 211.2176,234.55068 C 211.2176,234.55068 211.2176,234.55068 211.2176,234.55068"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5287"
+ d="M 233.15615,239.94299 C 233.15615,239.94299 226.44421,236.69379 226.44421,236.69379 C 225.78369,236.37403 224.84989,236.41177 224.348,236.77797 C 224.348,236.77797 219.29773,240.46286 219.29773,240.46286 C 218.78807,240.83472 218.90378,241.40005 219.55968,241.73088 C 219.55968,241.73088 226.22576,245.09312 226.22576,245.09312 C 226.90521,245.43582 227.86846,245.40352 228.38283,245.02018 C 228.38283,245.02018 233.47896,241.22224 233.47896,241.22224 C 233.98531,240.84488 233.84015,240.27412 233.15615,239.94299 C 233.15615,239.94299 233.15615,239.94299 233.15615,239.94299"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5289"
+ d="M 220.30432,227.87754 C 220.30432,227.87754 227.46486,231.13608 227.46486,231.13608 C 227.82573,231.3003 227.87475,231.60963 227.57378,231.82996 C 227.57378,231.82996 221.38229,236.3625 221.38229,236.3625 C 221.06565,236.59429 220.51407,236.64288 220.14663,236.4711 C 220.14663,236.4711 212.85793,233.06353 212.85793,233.06353 C 212.49851,232.8955 212.47011,232.57953 212.7932,232.35543 C 212.7932,232.35543 219.11286,227.97192 219.11286,227.97192 C 219.42016,227.75877 219.95112,227.71681 220.30432,227.87754 C 220.30432,227.87754 220.30432,227.87754 220.30432,227.87754"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 253.8328,253.35343 C 253.8328,253.35343 246.80705,249.98982 246.80705,249.98982 C 246.25118,249.7237 245.43236,249.7982 244.96971,250.15699 C 244.96971,250.15699 239.12467,254.6899 239.12467,254.6899 C 238.65231,255.05622 238.71907,255.57195 239.27581,255.84611 C 239.27581,255.84611 246.31353,259.3118 246.31353,259.3118 C 246.88258,259.59203 247.72148,259.51595 248.19294,259.14132 C 248.19294,259.14132 254.02601,254.50633 254.02601,254.50633 C 254.48765,254.13951 254.40082,253.62536 253.8328,253.35343 C 253.8328,253.35343 253.8328,253.35343 253.8328,253.35343"
+ id="path5291"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 241.69245,250.18836 C 241.69245,250.18836 246.86241,246.20217 246.86241,246.20217 C 247.27195,245.8864 247.09122,245.38581 246.45826,245.07965 C 246.45826,245.07965 238.59679,241.27706 238.59679,241.27706 C 237.97222,240.97496 237.13747,240.98108 236.72408,241.29091 C 236.72408,241.29091 231.50595,245.20176 231.50595,245.20176 C 231.08462,245.51753 231.25039,246.01986 231.87874,246.32792 C 231.87874,246.32792 239.78839,250.20585 239.78839,250.20585 C 240.42527,250.5181 241.27499,250.51024 241.69245,250.18836 C 241.69245,250.18836 241.69245,250.18836 241.69245,250.18836"
+ id="path5293"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5295"
+ d="M 262.29906,246.8676 C 262.29906,246.8676 254.88168,243.44853 254.88168,243.44853 C 254.50008,243.27263 253.95712,243.3153 253.66336,243.54406 C 253.66336,243.54406 248.0194,247.9394 248.0194,247.9394 C 247.72057,248.17212 247.78403,248.50657 248.1626,248.68946 C 248.1626,248.68946 255.52239,252.24492 255.52239,252.24492 C 255.9167,252.43541 256.47799,252.39569 256.77993,252.1557 C 256.77993,252.1557 262.48146,247.62397 262.48146,247.62397 C 262.77816,247.38815 262.69638,247.05074 262.29906,246.8676 C 262.29906,246.8676 262.29906,246.8676 262.29906,246.8676"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5297"
+ d="M 269.92313,240.18072 C 269.92313,240.18072 263.31143,237.09826 263.31143,237.09826 C 262.81933,236.86884 262.13676,236.90784 261.77997,237.18694 C 261.77997,237.18694 256.80537,241.07833 256.80537,241.07833 C 256.42536,241.3756 256.53169,241.80611 257.04493,242.04226 C 257.04493,242.04226 263.93919,245.21441 263.93919,245.21441 C 264.44655,245.44785 265.14436,245.3899 265.50271,245.08585 C 265.50271,245.08585 270.19479,241.10477 270.19479,241.10477 C 270.53139,240.81918 270.4098,240.40761 269.92313,240.18072 C 269.92313,240.18072 269.92313,240.18072 269.92313,240.18072"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5299"
+ d="M 284.15897,244.25926 C 284.15897,244.25926 290.08975,239.34554 290.08975,239.34554 C 290.3372,239.14053 290.25996,238.84705 289.91756,238.6876 C 289.91756,238.6876 282.05801,235.02758 282.05801,235.02758 C 281.73357,234.87649 281.27511,234.91294 281.02917,235.10924 C 281.02917,235.10924 275.13725,239.81168 275.13725,239.81168 C 274.88342,240.01427 274.9381,240.30589 275.26078,240.46561 C 275.26078,240.46561 283.08145,244.3369 283.08145,244.3369 C 283.42232,244.50564 283.90334,244.47105 284.15897,244.25926 C 284.15897,244.25926 284.15897,244.25926 284.15897,244.25926"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5301"
+ d="M 290.6347,228.41799 C 290.6347,228.41799 298.47677,231.7748 298.47677,231.7748 C 298.96904,231.98552 299.08998,232.38046 298.7459,232.65955 C 298.7459,232.65955 293.04479,237.28397 293.04479,237.28397 C 292.69915,237.56434 292.03399,237.60956 291.55538,237.38617 C 291.55538,237.38617 283.93166,233.82786 283.93166,233.82786 C 283.4873,233.62045 283.39853,233.2382 283.73091,232.97007 C 283.73091,232.97007 289.21363,228.54719 289.21363,228.54719 C 289.54456,228.28023 290.17756,228.22231 290.6347,228.41799 C 290.6347,228.41799 290.6347,228.41799 290.6347,228.41799"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5303"
+ d="M 301.86982,230.05516 C 301.86982,230.05516 306.72655,226.01075 306.72655,226.01075 C 307.20873,225.60921 307.07252,225.04406 306.41901,224.74173 C 306.41901,224.74173 299.71761,221.64153 299.71761,221.64153 C 299.02841,221.32268 298.06453,221.39571 297.55878,221.80728 C 297.55878,221.80728 292.46319,225.95398 292.46319,225.95398 C 291.94831,226.37298 292.11057,226.9602 292.82454,227.2686 C 292.82454,227.2686 299.76474,230.26652 299.76474,230.26652 C 300.44135,230.5588 301.37922,230.4637 301.86982,230.05516 C 301.86982,230.05516 301.86982,230.05516 301.86982,230.05516"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5305"
+ d="M 229.75901,221.51708 C 229.75901,221.51708 236.30365,224.3537 236.30365,224.3537 C 236.77779,224.55921 236.83816,224.95708 236.4374,225.2459 C 236.4374,225.2459 230.73685,229.35443 230.73685,229.35443 C 230.32395,229.65201 229.60775,229.71902 229.13267,229.50455 C 229.13267,229.50455 222.57677,226.54493 222.57677,226.54493 C 222.11612,226.33697 222.07952,225.93711 222.49312,225.64852 C 222.49312,225.64852 228.20494,221.66299 228.20494,221.66299 C 228.60659,221.38273 229.29903,221.31772 229.75901,221.51708 C 229.75901,221.51708 229.75901,221.51708 229.75901,221.51708"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5307"
+ d="M 241.4331,233.77444 C 241.4331,233.77444 234.86702,230.51453 234.86702,230.51453 C 234.2884,230.22725 233.46852,230.2512 233.03004,230.56861 C 233.03004,230.56861 228.00571,234.20578 228.00571,234.20578 C 227.5701,234.52112 227.69,235.00165 228.27321,235.28282 C 228.27321,235.28282 234.89177,238.47354 234.89177,238.47354 C 235.46008,238.74751 236.26364,238.71874 236.69472,238.40938 C 236.69472,238.40938 241.66657,234.84141 241.66657,234.84141 C 242.10045,234.53004 241.99687,234.05434 241.4331,233.77444 C 241.4331,233.77444 241.4331,233.77444 241.4331,233.77444"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5309"
+ d="M 250.21733,243.40142 C 250.21733,243.40142 255.39176,239.30139 255.39176,239.30139 C 255.89164,238.9053 255.71333,238.31587 254.9964,237.97824 C 254.9964,237.97824 247.93065,234.65074 247.93065,234.65074 C 247.23226,234.32185 246.25306,234.35802 245.73067,234.73327 C 245.73067,234.73327 240.32649,238.61528 240.32649,238.61528 C 239.76575,239.01809 239.8905,239.62564 240.61117,239.97588 C 240.61117,239.97588 247.90666,243.52145 247.90666,243.52145 C 248.64734,243.88142 249.68011,243.82709 250.21733,243.40142 C 250.21733,243.40142 250.21733,243.40142 250.21733,243.40142"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 259.03235,236.38432 C 259.03235,236.38432 264.00233,232.5172 264.00233,232.5172 C 264.49375,232.13483 264.28734,231.56751 263.54605,231.2468 C 263.54605,231.2468 256.4643,228.18292 256.4643,228.18292 C 255.78568,227.88932 254.86097,227.94181 254.38524,228.29923 C 254.38524,228.29923 249.57716,231.91156 249.57716,231.91156 C 249.08982,232.2777 249.22635,232.82706 249.889,233.14485 C 249.889,233.14485 256.80881,236.46342 256.80881,236.46342 C 257.53364,236.81102 258.52826,236.77654 259.03235,236.38432 C 259.03235,236.38432 259.03235,236.38432 259.03235,236.38432"
+ id="path5311"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5313"
+ d="M 249.92718,227.47874 C 249.92718,227.47874 243.57843,224.26363 243.57843,224.26363 C 242.94161,223.94113 242.03351,223.96693 241.54071,224.32288 C 241.54071,224.32288 236.50753,227.95826 236.50753,227.95826 C 235.99196,228.33065 236.10354,228.89802 236.75945,229.2289 C 236.75945,229.2289 243.29817,232.52743 243.29817,232.52743 C 243.95188,232.8572 244.8789,232.81481 245.37499,232.4339 C 245.37499,232.4339 250.21821,228.7151 250.21821,228.7151 C 250.69243,228.35098 250.56193,227.80019 249.92718,227.47874 C 249.92718,227.47874 249.92718,227.47874 249.92718,227.47874"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5315"
+ d="M 278.37779,233.42877 C 278.37779,233.42877 271.86628,230.49633 271.86628,230.49633 C 271.35525,230.26619 270.61009,230.34047 270.19363,230.66278 C 270.19363,230.66278 264.92861,234.73754 264.92861,234.73754 C 264.50283,235.06706 264.56772,235.52596 265.07602,235.76657 C 265.07602,235.76657 271.55435,238.83315 271.55435,238.83315 C 272.08251,239.08315 272.85436,239.01044 273.28293,238.66998 C 273.28293,238.66998 278.58112,234.46107 278.58112,234.46107 C 279.00009,234.12824 278.90852,233.66778 278.37779,233.42877 C 278.37779,233.42877 278.37779,233.42877 278.37779,233.42877"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 286.64967,226.73945 C 286.64967,226.73945 280.75469,223.85413 280.75469,223.85413 C 280.1553,223.56076 279.26816,223.63562 278.7659,224.02366 C 278.7659,224.02366 273.67528,227.95655 273.67528,227.95655 C 273.15783,228.35631 273.24091,228.914 273.86123,229.20522 C 273.86123,229.20522 279.9603,232.06855 279.9603,232.06855 C 280.56171,232.3509 281.4454,232.25691 281.94196,231.85949 C 281.94196,231.85949 286.82847,227.94856 286.82847,227.94856 C 287.31074,227.56258 287.23111,227.02404 286.64967,226.73945 C 286.64967,226.73945 286.64967,226.73945 286.64967,226.73945"
+ id="path5317"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5319"
+ d="M 267.6823,229.91307 C 267.6823,229.91307 272.46908,226.23566 272.46908,226.23566 C 272.94434,225.87054 272.74124,225.3253 272.01611,225.01342 C 272.01611,225.01342 264.88193,221.94496 264.88193,221.94496 C 264.17799,221.64219 263.23154,221.68466 262.7575,222.03994 C 262.7575,222.03994 257.98381,225.61763 257.98381,225.61763 C 257.50171,225.97894 257.67724,226.52125 258.37978,226.83381 C 258.37978,226.83381 265.50086,230.00199 265.50086,230.00199 C 266.22477,230.32406 267.1988,230.28451 267.6823,229.91307 C 267.6823,229.91307 267.6823,229.91307 267.6823,229.91307"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 258.51488,221.22986 C 258.51488,221.22986 252.19037,218.21416 252.19037,218.21416 C 251.57618,217.9213 250.69327,217.96397 250.20557,218.30991 C 250.20557,218.30991 245.20204,221.8591 245.20204,221.8591 C 244.68719,222.22431 244.76403,222.77336 245.37981,223.09013 C 245.37981,223.09013 251.72747,226.35547 251.72747,226.35547 C 252.38375,226.69307 253.32987,226.6498 253.84288,226.25849 C 253.84288,226.25849 258.82312,222.45965 258.82312,222.45965 C 259.30803,222.08977 259.16806,221.54132 258.51488,221.22986 C 258.51488,221.22986 258.51488,221.22986 258.51488,221.22986"
+ id="path5321"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5323"
+ d="M 239.22906,214.77058 C 239.22906,214.77058 245.75948,217.65839 245.75948,217.65839 C 246.22836,217.86574 246.27624,218.27214 245.86583,218.5699 C 245.86583,218.5699 240.04074,222.79608 240.04074,222.79608 C 239.61975,223.10153 238.89933,223.17644 238.42646,222.96374 C 238.42646,222.96374 231.84118,220.00174 231.84118,220.00174 C 231.37421,219.79169 231.34116,219.38081 231.76608,219.08076 C 231.76608,219.08076 237.64602,214.92874 237.64602,214.92874 C 238.06034,214.63619 238.76594,214.56577 239.22906,214.77058 C 239.22906,214.77058 239.22906,214.77058 239.22906,214.77058"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5325"
+ d="M 247.90724,208.64597 C 247.90724,208.64597 254.53759,211.50631 254.53759,211.50631 C 255.01636,211.71285 255.09618,212.10048 254.71562,212.37537 C 254.71562,212.37537 249.34818,216.25246 249.34818,216.25246 C 248.96271,216.5309 248.26761,216.58434 247.79061,216.37235 C 247.79061,216.37235 241.18538,213.43689 241.18538,213.43689 C 240.71963,213.22991 240.65428,212.84354 241.03791,212.57052 C 241.03791,212.57052 246.38024,208.76857 246.38024,208.76857 C 246.75905,208.49898 247.43968,208.44427 247.90724,208.64597 C 247.90724,208.64597 247.90724,208.64597 247.90724,208.64597"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5327"
+ d="M 266.53609,215.35847 C 266.53609,215.35847 260.2425,212.50539 260.2425,212.50539 C 259.63111,212.22823 258.77381,212.26339 258.31648,212.58345 C 258.31648,212.58345 253.69899,215.81504 253.69899,215.81504 C 253.23142,216.14228 253.3369,216.6411 253.93933,216.93434 C 253.93933,216.93434 260.14335,219.95417 260.14335,219.95417 C 260.78415,220.26608 261.68732,220.24081 262.16416,219.89654 C 262.16416,219.89654 266.87121,216.49816 266.87121,216.49816 C 267.3372,216.16172 267.18586,215.65303 266.53609,215.35847 C 266.53609,215.35847 266.53609,215.35847 266.53609,215.35847"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5329"
+ d="M 275.86123,223.49708 C 275.86123,223.49708 280.69597,219.76003 280.69597,219.76003 C 281.17477,219.38993 280.98509,218.85214 280.27334,218.55429 C 280.27334,218.55429 273.2735,215.62511 273.2735,215.62511 C 272.58309,215.3362 271.64347,215.39287 271.16418,215.75208 C 271.16418,215.75208 266.32552,219.37853 266.32552,219.37853 C 265.83563,219.74569 265.99513,220.28253 266.68578,220.58229 C 266.68578,220.58229 273.68954,223.62208 273.68954,223.62208 C 274.40184,223.93123 275.37164,223.87552 275.86123,223.49708 C 275.86123,223.49708 275.86123,223.49708 275.86123,223.49708"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 282.59083,221.04513 C 282.59083,221.04513 287.71903,217.05699 287.71903,217.05699 C 288.22587,216.66285 289.08472,216.56532 289.64647,216.83783 C 289.64647,216.83783 295.29725,219.57907 295.29725,219.57907 C 295.86731,219.85561 295.92338,220.40166 295.42118,220.80393 C 295.42118,220.80393 290.33924,224.87461 290.33924,224.87461 C 289.82349,225.28773 288.94404,225.3914 288.36924,225.1065 C 288.36924,225.1065 282.67221,222.28271 282.67221,222.28271 C 282.10592,222.00203 282.07045,221.44982 282.59083,221.04513 C 282.59083,221.04513 282.59083,221.04513 282.59083,221.04513"
+ id="path5331"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5333"
+ d="M 273.82385,209.9072 C 273.82385,209.9072 267.67742,207.1135 267.67742,207.1135 C 267.05691,206.83146 266.21983,206.85051 265.80038,207.15733 C 265.80038,207.15733 261.55003,210.26641 261.55003,210.26641 C 261.11807,210.58238 261.28238,211.06634 261.91859,211.35037 C 261.91859,211.35037 268.21969,214.1634 268.21969,214.1634 C 268.84554,214.4428 269.68458,214.41091 270.10075,214.09302 C 270.10075,214.09302 274.19645,210.96462 274.19645,210.96462 C 274.60069,210.65585 274.43443,210.18473 273.82385,209.9072 C 273.82385,209.9072 273.82385,209.9072 273.82385,209.9072"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5335"
+ d="M 257.3726,201.76885 C 257.3726,201.76885 264.64202,204.86157 264.64202,204.86157 C 264.95177,204.99335 264.97965,205.26073 264.70378,205.46149 C 264.70378,205.46149 257.98723,210.34941 257.98723,210.34941 C 257.69315,210.56343 257.19866,210.62527 256.87934,210.48761 C 256.87934,210.48761 249.38649,207.25742 249.38649,207.25742 C 249.07032,207.12112 249.06104,206.84361 249.36486,206.63564 C 249.36486,206.63564 256.30482,201.88518 256.30482,201.88518 C 256.58991,201.69003 257.06581,201.63832 257.3726,201.76885 C 257.3726,201.76885 257.3726,201.76885 257.3726,201.76885"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5337"
+ d="M 284.0905,217.40082 C 284.0905,217.40082 288.28521,214.18116 288.28521,214.18116 C 288.70353,213.86008 288.47298,213.36105 287.76806,213.06182 C 287.76806,213.06182 280.69745,210.06045 280.69745,210.06045 C 279.9862,209.75854 279.07181,209.77379 278.64748,210.09508 C 278.64748,210.09508 274.39236,213.31696 274.39236,213.31696 C 273.96443,213.64097 274.19761,214.14507 274.91495,214.44677 C 274.91495,214.44677 282.04596,217.44592 282.04596,217.44592 C 282.75689,217.74492 283.66866,217.7246 284.0905,217.40082 C 284.0905,217.40082 284.0905,217.40082 284.0905,217.40082"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5339"
+ d="M 300.10154,217.06983 C 300.10154,217.06983 316.31837,203.96829 316.31837,203.96829 C 317.07607,203.35614 317.4003,202.7538 317.04873,202.61609 C 317.04873,202.61609 310.03269,199.86796 310.03269,199.86796 C 309.70146,199.73822 308.83575,200.10447 308.08844,200.69068 C 308.08844,200.69068 292.11577,213.22035 292.11577,213.22035 C 291.30809,213.85393 290.91207,214.49139 291.23134,214.64793 C 291.23134,214.64793 298.003,217.96805 298.003,217.96805 C 298.34279,218.13465 299.2804,217.73322 300.10154,217.06983 C 300.10154,217.06983 300.10154,217.06983 300.10154,217.06983"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 291.15172,211.81971 C 291.15172,211.81971 294.95784,208.85652 294.95784,208.85652 C 295.33535,208.56261 295.06588,208.08714 294.35728,207.79127 C 294.35728,207.79127 287.46322,204.91266 287.46322,204.91266 C 286.7905,204.63177 285.951,204.6327 285.57753,204.91398 C 285.57753,204.91398 281.81341,207.749 281.81341,207.749 C 281.43293,208.03556 281.66197,208.50175 282.33038,208.79505 C 282.33038,208.79505 289.18243,211.80181 289.18243,211.80181 C 289.88692,212.11095 290.76688,212.11932 291.15172,211.81971 C 291.15172,211.81971 291.15172,211.81971 291.15172,211.81971"
+ id="path5341"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ d="M 279.78845,205.15721 C 279.78845,205.15721 273.64923,202.7238 273.64923,202.7238 C 273.07415,202.49585 272.35188,202.50572 272.02271,202.74427 C 272.02271,202.74427 268.6721,205.17246 268.6721,205.17246 C 268.33004,205.42034 268.50084,205.82253 269.06217,206.07617 C 269.06217,206.07617 275.0647,208.78839 275.0647,208.78839 C 275.70867,209.07937 276.52129,209.09274 276.87788,208.8159 C 276.87788,208.8159 280.365,206.10863 280.365,206.10863 C 280.70701,205.84311 280.44598,205.41784 279.78845,205.15721 C 279.78845,205.15721 279.78845,205.15721 279.78845,205.15721"
+ id="path5343"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5345"
+ d="M 266.63729,203.4528 C 266.63729,203.4528 259.22437,200.28887 259.22437,200.28887 C 258.90107,200.15088 259.26093,199.6067 260.02623,199.07179 C 260.02623,199.07179 276.04515,187.8754 276.04515,187.8754 C 276.70328,187.4154 277.47826,187.14286 277.78675,187.26189 C 277.78675,187.26189 284.85126,189.98782 284.85126,189.98782 C 285.16872,190.11032 284.90984,190.59119 284.26684,191.06857 C 284.26684,191.06857 268.59644,202.70261 268.59644,202.70261 C 267.84684,203.25912 266.97083,203.59516 266.63729,203.4528 C 266.63729,203.4528 266.63729,203.4528 266.63729,203.4528"
+ style="opacity:0.99720004;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ <path
+ id="path5347"
+ sodipodi:nodetypes="cccccssssccccc"
+ d="M 306.08894,198.05464 C 306.08894,198.05464 289.86483,191.75754 289.86483,191.75754 C 288.75309,191.32603 287.34294,191.34222 286.72043,191.80216 C 286.72043,191.80216 275.86985,199.81916 275.86985,199.81916 C 275.21811,200.30071 275.08509,200.71469 276.34881,201.06644 L 282.51762,203.58752 C 283.51554,203.99535 283.51356,204.01646 284.38014,203.38499 L 285.53498,202.54346 C 285.7875,202.35945 286.54428,202.2881 287.35569,202.6377 L 295.71352,206.2387 C 296.63524,206.49525 297.43593,206.57335 297.95625,206.16455 C 297.95625,206.16455 306.65122,199.3329 306.65122,199.3329 C 307.15193,198.93949 306.90591,198.37173 306.08894,198.05464 C 306.08894,198.05464 306.08894,198.05464 306.08894,198.05464"
+ style="opacity:1;fill:#4d4d4d;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ </g>
+ <path
+ d="M 195.84384,316.18138 C 198.01729,317.52381 197.72963,318.48268 195.26851,320.68809 C 192.78733,322.9115 196.00365,319.69726 196.67486,318.67446 C 197.37566,317.60657 193.70779,314.86206 195.84384,316.18138 z "
+ sodipodi:nodetypes="czzz"
+ id="path2379"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3350"
+ sodipodi:nodetypes="czzz"
+ d="M 216.172,300.16816 C 218.34546,301.51059 218.79294,302.1818 216.33181,304.38722 C 213.85064,306.61061 216.81125,303.42834 217.61032,302.34161 C 218.38754,301.28458 214.03595,298.84884 216.172,300.16816 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 206.4554,308.31861 C 208.62885,309.66103 209.20418,310.14046 206.74306,312.34587 C 204.26188,314.56927 207.35035,311.1313 207.82978,310.49205 C 208.39381,309.74001 204.31935,306.99928 206.4554,308.31861 z "
+ sodipodi:nodetypes="czzz"
+ id="path3352"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3354"
+ sodipodi:nodetypes="czzz"
+ d="M 225.50506,292.46519 C 227.67851,293.80762 228.25383,294.28706 225.79272,296.49247 C 223.31154,298.71586 227.0073,295.62948 226.78356,294.4149 C 226.56079,293.20564 223.36901,291.14588 225.50506,292.46519 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3356"
+ sodipodi:nodetypes="czzz"
+ d="M 203.49886,293.36015 C 205.63491,294.67947 206.0239,295.13407 203.48288,297.25957 C 200.9308,299.39433 204.5367,295.76662 204.79335,295.2779 C 205.04344,294.80165 201.36281,292.04083 203.49886,293.36015 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 189.00386,289.3009 C 191.59281,290.73922 191.94897,291.213 189.29153,293.32818 C 186.61856,295.45568 190.37824,292.20949 190.37824,291.21865 C 190.37824,290.19585 186.42834,287.87006 189.00386,289.3009 z "
+ sodipodi:nodetypes="czzz"
+ id="path3358"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3360"
+ sodipodi:nodetypes="czzz"
+ d="M 171.16877,285.43344 C 173.47007,286.64801 174.17325,287.38316 171.45643,289.46072 C 168.74413,291.53484 172.83082,288.34203 172.60709,287.38316 C 172.36917,286.36356 168.8898,284.23064 171.16877,285.43344 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 155.9546,281.50205 C 158.12806,282.78055 158.83124,283.54764 156.24227,285.52933 C 153.64201,287.51964 157.42488,284.66634 157.20114,283.38784 C 156.97829,282.11439 153.75272,280.20681 155.9546,281.50205 z "
+ sodipodi:nodetypes="czzz"
+ id="path3362"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 161.10057,292.56108 C 163.27403,293.9035 163.96914,294.4897 161.38823,296.58835 C 158.81117,298.6839 157.15517,299.80076 160.6531,296.71621 C 164.16898,293.61583 158.96453,291.24176 161.10057,292.56108 z "
+ sodipodi:nodetypes="czzz"
+ id="path3364"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 178.74389,296.62031 C 182.35566,298.53807 181.81229,298.31433 176.12296,302.85301 C 170.44917,307.37928 178.76168,300.08938 179.60688,299.14536 C 180.42197,298.23497 175.15702,294.71579 178.74389,296.62031 z "
+ sodipodi:nodetypes="czzz"
+ id="path3366"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 193.22292,300.42386 C 195.39636,301.76628 195.49224,303.36442 189.3874,308.28664 C 183.26317,313.22451 195.05807,303.89438 193.51058,301.89414 C 192.00596,299.94933 191.08687,299.10454 193.22292,300.42386 z "
+ sodipodi:nodetypes="czzz"
+ id="path3368"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3370"
+ sodipodi:nodetypes="czzz"
+ d="M 145.18324,288.69362 C 147.80416,290.22781 147.8681,290.89903 145.18324,292.91266 C 142.52875,294.90353 146.62155,291.63417 146.39782,290.67529 C 146.18115,289.74671 142.58609,287.17332 145.18324,288.69362 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3372"
+ sodipodi:nodetypes="czzz"
+ d="M 165.73514,274.56618 C 167.9086,275.9086 168.61177,276.57982 166.0228,278.59347 C 163.40256,280.63143 166.7899,277.25103 167.20542,276.73963 C 167.59048,276.2657 163.5991,273.24685 165.73514,274.56618 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 181.26892,278.14598 C 183.44237,279.48841 184.0177,279.96784 181.55659,282.17326 C 179.07541,284.39665 182.5794,281.34223 182.35566,280.06373 C 182.13279,278.79029 179.13287,276.82666 181.26892,278.14598 z "
+ sodipodi:nodetypes="czzz"
+ id="path3374"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3376"
+ sodipodi:nodetypes="czzz"
+ d="M 198.2659,281.884 C 200.43936,283.22641 201.01468,283.70585 198.55356,285.91126 C 196.07238,288.13466 199.57637,285.08024 199.35263,283.80174 C 199.12976,282.52829 196.12986,280.56467 198.2659,281.884 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 213.08942,285.57681 C 215.8957,286.96443 216.29022,287.35347 213.37708,289.60408 C 210.50713,291.82133 214.72017,288.27028 214.62817,287.40415 C 214.54091,286.58272 210.2463,284.17095 213.08942,285.57681 z "
+ sodipodi:nodetypes="czzz"
+ id="path3378"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3380"
+ sodipodi:nodetypes="czzz"
+ d="M 175.13212,267.66227 C 177.30557,269.00471 177.99635,269.63282 175.41979,271.68956 C 172.87468,273.72117 176.44259,270.7946 176.41062,269.64395 C 176.37866,268.4933 172.99607,266.34296 175.13212,267.66227 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3382"
+ sodipodi:nodetypes="czzz"
+ d="M 190.72984,270.85853 C 192.96721,272.0731 193.60646,272.74431 191.01751,274.88581 C 188.47105,276.99212 192.23208,274.11871 192.00834,272.84021 C 191.78548,271.56676 188.48472,269.63975 190.72984,270.85853 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 207.55763,274.67852 C 209.73109,276.02094 210.30641,276.50038 207.8453,278.70579 C 205.36412,280.92919 208.8681,277.87477 208.64437,276.59627 C 208.4215,275.32282 205.42158,273.35919 207.55763,274.67852 z "
+ sodipodi:nodetypes="czzz"
+ id="path3384"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3386"
+ sodipodi:nodetypes="czzz"
+ d="M 223.20376,277.63457 C 226.23604,279.29342 225.95254,279.45644 223.49142,281.66186 C 221.01023,283.88525 224.74999,280.23696 224.6521,279.41673 C 224.56485,278.6857 220.20621,275.99474 223.20376,277.63457 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 277.38117,248.70302 C 281.95031,251.26589 281.48626,250.13465 270.88855,258.92295 C 260.38024,267.63712 274.33964,254.68517 277.12282,252.1444 C 279.88337,249.62427 272.7431,246.10148 277.38117,248.70302 z "
+ sodipodi:nodetypes="czzz"
+ id="path3388"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3390"
+ sodipodi:nodetypes="czzz"
+ d="M 231.57794,270.34712 C 233.75139,271.68956 234.32672,272.16899 231.86561,274.37441 C 229.38442,276.5978 232.88839,273.54338 232.66467,272.26488 C 232.4418,270.99143 229.44189,269.02781 231.57794,270.34712 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 241.29454,263.69892 C 243.46799,265.04135 244.04332,265.52079 241.58221,267.72621 C 239.10103,269.9496 242.60501,266.89517 242.38128,265.61667 C 242.15841,264.34322 239.15849,262.3796 241.29454,263.69892 z "
+ sodipodi:nodetypes="czzz"
+ id="path3392"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3394"
+ sodipodi:nodetypes="czzz"
+ d="M 250.24405,256.53932 C 252.4175,257.88175 252.99283,258.36119 250.53172,260.5666 C 248.05053,262.78999 251.55451,259.73557 251.33077,258.45707 C 251.10792,257.18362 248.10801,255.21999 250.24405,256.53932 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 258.68216,249.37971 C 260.85561,250.72214 261.43093,251.20158 258.96982,253.40699 C 256.48864,255.63038 259.99262,252.57596 259.76888,251.29747 C 259.54603,250.02402 256.54611,248.06039 258.68216,249.37971 z "
+ sodipodi:nodetypes="czzz"
+ id="path3396"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3398"
+ sodipodi:nodetypes="czzz"
+ d="M 215.08528,267.40658 C 217.25872,268.749 217.83405,269.22845 215.37294,271.43386 C 212.89175,273.65725 216.39574,270.60283 216.172,269.32432 C 215.94914,268.05088 212.94923,266.08725 215.08528,267.40658 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 200.54781,263.45098 C 204.31939,265.43265 203.68014,265.40068 200.83547,267.47825 C 198.05046,269.51225 201.27066,266.64722 202.04136,265.54954 C 202.78342,264.49262 196.80222,261.48295 200.54781,263.45098 z "
+ sodipodi:nodetypes="czzz"
+ id="path3400"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3402"
+ sodipodi:nodetypes="czzz"
+ d="M 185.48798,260.50267 C 188.30069,262.16472 188.68423,262.2606 185.77564,264.52995 C 182.90663,266.76843 187.05414,263.76284 186.83041,262.48434 C 186.60755,261.21089 182.72253,258.86853 185.48798,260.50267 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 194.50141,253.47091 C 196.67486,254.81334 197.25018,255.29277 194.78907,257.49819 C 192.30789,259.72159 195.81187,256.66717 195.58814,255.38867 C 195.36528,254.11522 192.36537,252.15159 194.50141,253.47091 z "
+ sodipodi:nodetypes="czzz"
+ id="path3404"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3406"
+ sodipodi:nodetypes="czzz"
+ d="M 204.79335,246.88664 C 206.96679,248.22906 207.54211,248.7085 205.081,250.91391 C 202.59982,253.13731 206.10381,250.08289 205.88007,248.80439 C 205.65721,247.53094 202.6573,245.56731 204.79335,246.88664 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 209.97127,256.34754 C 212.14473,257.68997 212.72004,258.16941 210.25893,260.37482 C 207.77775,262.59821 211.28174,259.54379 211.058,258.26529 C 210.83513,256.99184 207.83522,255.02823 209.97127,256.34754 z "
+ sodipodi:nodetypes="czzz"
+ id="path3408"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3410"
+ sodipodi:nodetypes="czzz"
+ d="M 219.94358,248.99617 C 222.11703,250.33858 222.69236,250.81803 220.23124,253.02345 C 217.75006,255.24684 221.25405,252.19241 221.03031,250.91391 C 220.80745,249.64046 217.80754,247.67683 219.94358,248.99617 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 226.08039,260.5666 C 228.25383,261.90901 228.82916,262.38845 226.36805,264.59388 C 223.88687,266.81727 227.39085,263.76284 227.16711,262.48434 C 226.94426,261.21089 223.94434,259.24727 226.08039,260.5666 z "
+ sodipodi:nodetypes="czzz"
+ id="path3412"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3414"
+ sodipodi:nodetypes="czzz"
+ d="M 234.39063,254.11016 C 236.56408,255.4526 237.13941,255.93204 234.6783,258.13745 C 232.19712,260.36084 235.70111,257.30642 235.47737,256.02792 C 235.25451,254.75447 232.25458,252.79084 234.39063,254.11016 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 229.27663,242.2201 C 231.45009,243.56254 232.02541,244.04197 229.5643,246.24738 C 227.08312,248.47078 230.58711,245.41636 230.36337,244.13786 C 230.1405,242.86442 227.14058,240.90079 229.27663,242.2201 z "
+ sodipodi:nodetypes="czzz"
+ id="path3416"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3418"
+ sodipodi:nodetypes="czzz"
+ d="M 243.0141,247.59302 C 245.39457,248.78588 245.85328,249.41488 243.39217,251.6203 C 240.91099,253.84369 244.68618,250.11125 244.59804,249.42037 C 244.51044,248.73372 240.56163,246.3641 243.0141,247.59302 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 213.8707,239.98274 C 216.04415,241.32515 216.61948,241.8046 214.15837,244.01001 C 211.67717,246.23341 215.18116,243.17898 214.95742,241.90048 C 214.73456,240.62703 211.73465,238.66341 213.8707,239.98274 z "
+ sodipodi:nodetypes="czzz"
+ id="path3420"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3422"
+ sodipodi:nodetypes="czzz"
+ d="M 222.91837,233.04137 C 225.31782,234.20299 225.93836,234.99885 223.20602,237.06866 C 220.48021,239.13354 224.63565,235.424 224.54751,234.77832 C 224.44726,234.04379 220.53635,231.8882 222.91837,233.04137 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 246.64686,229.49127 C 249.00111,230.74329 249.89286,231.08713 246.93452,233.51855 C 243.99824,235.93184 248.36413,232.59712 248.14039,231.31861 C 247.91754,230.04517 244.31107,228.24907 246.64686,229.49127 z "
+ sodipodi:nodetypes="czzz"
+ id="path3424"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3426"
+ sodipodi:nodetypes="czzz"
+ d="M 237.71153,235.84633 C 240.02059,237.03055 240.64112,237.84899 237.9992,239.87362 C 235.36048,241.89576 239.38361,238.50015 239.25027,237.67368 C 239.10149,236.75149 235.41158,234.66678 237.71153,235.84633 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 284.38244,228.84004 C 286.66889,230.04686 287.0481,230.84805 284.67009,232.86732 C 282.27897,234.89772 285.51201,231.73741 285.85337,231.07421 C 286.18578,230.42841 282.11363,227.64254 284.38244,228.84004 z "
+ sodipodi:nodetypes="czzz"
+ id="path3428"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3430"
+ sodipodi:nodetypes="czzz"
+ d="M 232.52396,226.41189 C 234.78783,227.52831 235.40834,228.14335 232.81163,230.16796 C 230.19284,232.20977 234.24125,228.7945 234.06271,228.10364 C 233.88666,227.4224 230.2964,225.31338 232.52396,226.41189 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 242.49949,219.69334 C 245.873,221.52582 244.75103,221.244 242.19951,223.3138 C 239.67516,225.36158 243.76147,221.8425 243.54101,221.11387 C 243.32053,220.38523 239.12596,217.86086 242.49949,219.69334 z "
+ sodipodi:nodetypes="czzz"
+ id="path3432"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3434"
+ sodipodi:nodetypes="czzz"
+ d="M 255.29092,223.29442 C 257.75818,224.59164 258.28831,225.25187 255.57858,227.32169 C 252.87211,229.38902 256.89519,225.88045 256.80705,225.21217 C 256.71558,224.51847 252.84135,222.00649 255.29092,223.29442 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 269.10194,227.3895 C 271.27539,228.73192 271.85071,229.21136 269.3896,231.41677 C 266.90842,233.64017 270.41241,230.58576 270.18867,229.30725 C 269.96581,228.0338 266.96589,226.07017 269.10194,227.3895 z "
+ sodipodi:nodetypes="czzz"
+ id="path3436"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3438"
+ sodipodi:nodetypes="czzz"
+ d="M 260.47206,233.782 C 262.64551,235.12443 263.22084,235.60386 260.75972,237.80927 C 258.27854,240.03267 261.78252,236.97826 261.55878,235.69975 C 261.33593,234.42631 258.33601,232.46268 260.47206,233.782 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 252.00426,240.41924 C 254.76534,241.85208 254.88865,242.2863 252.29193,244.44653 C 249.69924,246.60338 253.58595,242.98267 253.49781,242.15619 C 253.40345,241.27142 249.33359,239.0316 252.00426,240.41924 z "
+ sodipodi:nodetypes="czzz"
+ id="path3440"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3442"
+ sodipodi:nodetypes="czzz"
+ d="M 266.73671,242.2201 C 268.91017,243.56254 269.4855,244.04197 267.02438,246.24738 C 264.54319,248.47078 268.04717,245.41636 267.82343,244.13786 C 267.60058,242.86442 264.60067,240.90079 266.73671,242.2201 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 275.77863,235.80888 C 278.29108,237.0157 278.6856,237.56294 276.08889,239.70055 C 273.50776,241.82532 277.52012,238.29917 277.43037,237.50061 C 277.34312,236.7244 273.32091,234.62837 275.77863,235.80888 z "
+ sodipodi:nodetypes="czzz"
+ id="path3444"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3446"
+ sodipodi:nodetypes="czzz"
+ d="M 286.95302,240.94161 C 289.63786,242.37993 289.92552,242.74749 287.24067,244.96888 C 284.57146,247.17734 287.44366,244.39791 288.24749,243.37076 C 289.03146,242.369 284.28786,239.51385 286.95302,240.94161 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 295.77487,234.08611 C 298.28732,235.22513 298.70444,235.86277 296.06253,238.11339 C 293.44279,240.34511 296.0466,237.62948 297.1102,236.38809 C 298.1513,235.17297 293.28962,232.95944 295.77487,234.08611 z "
+ sodipodi:nodetypes="czzz"
+ id="path3448"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3450"
+ sodipodi:nodetypes="czzz"
+ d="M 304.36663,227.14477 C 306.83388,228.44201 307.1154,228.96663 304.65428,231.17204 C 302.17311,233.39544 304.72941,230.49547 305.36295,229.31112 C 306.04412,228.03769 301.92637,225.86174 304.36663,227.14477 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 293.12178,221.54036 C 295.47102,222.691 295.98242,223.42615 293.40945,225.56763 C 290.83798,227.70786 294.60852,224.14154 294.54411,223.33025 C 294.48107,222.53624 290.77257,220.38972 293.12178,221.54036 z "
+ sodipodi:nodetypes="czzz"
+ id="path3452"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3454"
+ sodipodi:nodetypes="czzz"
+ d="M 277.5149,220.70385 C 280.36638,222.31747 280.39928,222.70652 277.80256,224.73113 C 275.18377,226.77294 276.77322,224.86768 278.55642,223.48044 C 280.36765,222.07138 274.77049,219.15079 277.5149,220.70385 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 263.22084,217.41719 C 265.39428,218.75961 265.96961,219.23905 263.5085,221.44447 C 261.02732,223.66786 264.5313,220.61343 264.30756,219.33494 C 264.08471,218.06149 261.08479,216.09787 263.22084,217.41719 z "
+ sodipodi:nodetypes="czzz"
+ id="path3456"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3458"
+ sodipodi:nodetypes="czzz"
+ d="M 251.15585,213.31501 C 254.39256,214.77625 254.35665,214.86567 251.3531,216.98068 C 248.32814,219.11078 252.86671,215.85366 252.60418,214.91636 C 252.33613,213.95933 247.95664,211.87072 251.15585,213.31501 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 260.85561,206.10245 C 263.02906,207.44489 263.60438,207.92432 261.14327,210.12974 C 258.66209,212.35313 262.16607,209.29871 261.94234,208.02022 C 261.71947,206.74677 258.71956,204.78313 260.85561,206.10245 z "
+ sodipodi:nodetypes="czzz"
+ id="path3460"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3462"
+ sodipodi:nodetypes="czzz"
+ d="M 271.01969,211.72786 C 273.19314,213.07028 273.76847,213.54972 271.30736,215.75513 C 268.82618,217.97853 272.33015,214.92411 272.10641,213.64561 C 271.88356,212.37216 268.88364,210.40854 271.01969,211.72786 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 284.99091,214.99901 C 287.70679,216.25102 288.10131,216.82086 285.27858,219.02628 C 282.51164,221.18811 285.03572,219.0993 286.34886,217.27838 C 287.55847,215.60098 282.34938,213.78125 284.99091,214.99901 z "
+ sodipodi:nodetypes="czzz"
+ id="path3464"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3466"
+ sodipodi:nodetypes="czzz"
+ d="M 276.90079,206.80563 C 279.07425,208.14806 279.64957,208.6275 277.18845,210.83291 C 274.70727,213.05631 278.21126,210.00188 277.98752,208.72339 C 277.76466,207.44994 274.76474,205.48631 276.90079,206.80563 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 292.17888,209.68226 C 294.35233,211.02468 294.92766,211.50412 292.46654,213.70954 C 289.98536,215.93294 293.48934,212.87852 293.2656,211.60001 C 293.04275,210.32657 290.04283,208.36293 292.17888,209.68226 z "
+ sodipodi:nodetypes="czzz"
+ id="path3468"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3470"
+ sodipodi:nodetypes="czzz"
+ d="M 314.68049,204.24863 C 317.7489,205.39928 317.87645,205.56214 311.38835,210.80095 C 304.93164,216.01443 312.98405,209.0753 315.15994,207.02937 C 317.35285,204.96744 311.62248,203.10188 314.68049,204.24863 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ d="M 303.62147,199.96565 C 305.79492,201.30808 306.37025,201.78752 303.90913,203.99293 C 301.42794,206.21632 304.93192,203.16191 304.70818,201.8834 C 304.48533,200.60995 301.48542,198.64633 303.62147,199.96565 z "
+ sodipodi:nodetypes="czzz"
+ id="path3472"
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3474"
+ sodipodi:nodetypes="czzz"
+ d="M 281.07787,191.30607 C 284.96899,192.8745 284.82107,192.72112 278.69861,197.41265 C 272.5826,202.09922 281.39387,194.86394 282.66181,193.63065 C 283.93119,192.39593 277.15462,189.7247 281.07787,191.30607 z "
+ style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ id="path3477"
+ d="M 247.0478,21.870476 L 41.113266,89.503174 L 48.496608,139.14097 C 116.54867,104.13919 192.87556,126.61352 246.15284,103.7265 L 247.0478,21.870476 z "
+ style="fill:url(#linearGradient2500);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ inkscape:transform-center-x="21.926591"
+ inkscape:transform-center-y="-98.60823"
+ d="M 27.882376,75.746856 C 32.065415,74.206702 33.389047,74.781014 34.949531,76.633878 L 65.088465,277.78657 L 56.641394,273.5449 L 27.882376,75.746856 z "
+ sodipodi:nodetypes="ccccc"
+ id="path2180"
+ style="fill:#1a1a1a;fill-rule:evenodd;stroke:#333333;stroke-width:0.81824058;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+ <path
+ id="path13298"
+ sodipodi:nodetypes="ccccc"
+ d="M 92.828627,259.35202 L 230.90672,174.71526 C 232.64824,175.78414 234.17161,176.98389 234.23083,179.06216 L 96.66413,263.82678 C 96.420949,261.86067 95.117349,260.38059 92.828627,259.35202 z "
+ style="fill:#808080;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ transform="matrix(1.0228007,0,0,1.0228007,-6.1273429,-1.9735657)"
+ id="path14269"
+ sodipodi:nodetypes="ccccc"
+ d="M 166.43526,236.83511 L 228.92582,195.64614 L 229.45615,196.53002 L 168.02625,238.24933 L 166.43526,236.83511 z "
+ style="opacity:0.67000002;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter16257)" />
+ <path
+ transform="matrix(1.0228007,0,0,1.0228007,-6.1273429,-1.9735657)"
+ d="M 114.5513,270.06913 L 130.10765,259.99286 L 130.63798,260.87674 L 116.14229,271.48335 L 114.5513,270.06913 z "
+ sodipodi:nodetypes="ccccc"
+ id="path16261"
+ style="opacity:0.67000002;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter16257)" />
+ <path
+ transform="matrix(1.0228007,0,0,1.0228007,-6.1273429,-1.9735657)"
+ d="M 114.5513,270.06913 L 130.10765,259.99286 L 130.63798,260.87674 L 116.14229,271.48335 L 114.5513,270.06913 z "
+ sodipodi:nodetypes="ccccc"
+ id="path16263"
+ style="opacity:0.67000002;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter16257)" />
+ <path
+ transform="matrix(1.0228007,0,0,1.0228007,-6.1273429,-1.9735657)"
+ d="M 166.43526,236.83511 L 228.92582,195.64614 L 229.45615,196.53002 L 168.02625,238.24933 L 166.43526,236.83511 z "
+ sodipodi:nodetypes="ccccc"
+ id="path16267"
+ style="opacity:0.67000002;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter16257)" />
+ <path
+ d="M 104.05869,273.38134 C 106.59601,271.03005 113.13546,275.43531 112.49482,278.36804 L 104.05869,273.38134 z "
+ sodipodi:nodetypes="ccc"
+ id="path16269"
+ style="opacity:0.99720004;fill:#666666;fill-rule:evenodd;stroke:#000000;stroke-width:0.20456015;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
+ <path
+ sodipodi:nodetypes="ccsccccc"
+ id="path25800"
+ d="M 304.06894,248.1971 C 302.1656,248.29093 300.4498,248.80189 299.33849,249.7313 C 299.33849,249.7313 260.56796,282.17326 260.56795,282.17326 C 257.93245,284.37739 258.86046,287.65621 262.70943,289.52464 C 262.70943,289.52464 267.73895,291.93253 272.68174,294.28706 C 306.66914,288.15442 283.9982,253.02759 313.94536,251.0098 C 312.61326,250.41591 309.88612,249.2199 309.88612,249.2199 C 308.06831,248.43649 305.97228,248.10326 304.06894,248.1971 z "
+ style="fill:url(#linearGradient2490);fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.9527356;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dashoffset:0;stroke-opacity:1" />
+ </g>
+ </g>
+</svg>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/wpa_gui.svg b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/wpa_gui.svg
new file mode 100755
index 0000000..b3abf0a
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons/wpa_gui.svg
@@ -0,0 +1,256 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+<svg
+ xmlns:dc="http://purl.org/dc/elements/1.1/"
+ xmlns:cc="http://creativecommons.org/ns#"
+ xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+ xmlns:svg="http://www.w3.org/2000/svg"
+ xmlns="http://www.w3.org/2000/svg"
+ xmlns:xlink="http://www.w3.org/1999/xlink"
+ xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+ xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+ version="1.0"
+ width="128"
+ height="128"
+ id="svg2"
+ sodipodi:version="0.32"
+ inkscape:version="0.46"
+ sodipodi:docname="wpa_gui.svg"
+ inkscape:output_extension="org.inkscape.output.svg.inkscape">
+ <metadata
+ id="metadata47">
+ <rdf:RDF>
+ <cc:Work
+ rdf:about="">
+ <dc:format>image/svg+xml</dc:format>
+ <dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+ </cc:Work>
+ </rdf:RDF>
+ </metadata>
+ <sodipodi:namedview
+ inkscape:window-height="771"
+ inkscape:window-width="640"
+ inkscape:pageshadow="2"
+ inkscape:pageopacity="0.0"
+ guidetolerance="10.0"
+ gridtolerance="10.0"
+ objecttolerance="10.0"
+ borderopacity="1.0"
+ bordercolor="#666666"
+ pagecolor="#ffffff"
+ id="base"
+ showgrid="false"
+ inkscape:zoom="4.2421875"
+ inkscape:cx="64"
+ inkscape:cy="64"
+ inkscape:window-x="634"
+ inkscape:window-y="0"
+ inkscape:current-layer="svg2" />
+ <defs
+ id="defs4">
+ <inkscape:perspective
+ sodipodi:type="inkscape:persp3d"
+ inkscape:vp_x="0 : 64 : 1"
+ inkscape:vp_y="0 : 1000 : 0"
+ inkscape:vp_z="128 : 64 : 1"
+ inkscape:persp3d-origin="64 : 42.666667 : 1"
+ id="perspective49" />
+ <linearGradient
+ id="linearGradient39133">
+ <stop
+ id="stop39135"
+ style="stop-color:#252525;stop-opacity:1"
+ offset="0" />
+ <stop
+ id="stop39137"
+ style="stop-color:#515151;stop-opacity:1"
+ offset="0" />
+ <stop
+ id="stop39139"
+ style="stop-color:#878787;stop-opacity:1"
+ offset="0.28677997" />
+ <stop
+ id="stop39141"
+ style="stop-color:#000000;stop-opacity:1"
+ offset="0.92151743" />
+ <stop
+ id="stop39143"
+ style="stop-color:#ffffff;stop-opacity:0.73786408"
+ offset="1" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient39119">
+ <stop
+ id="stop39121"
+ style="stop-color:#ffffff;stop-opacity:0.82905984"
+ offset="0" />
+ <stop
+ id="stop39123"
+ style="stop-color:#ffffff;stop-opacity:0"
+ offset="1" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient39106">
+ <stop
+ id="stop39108"
+ style="stop-color:#ffffff;stop-opacity:1"
+ offset="0" />
+ <stop
+ id="stop39110"
+ style="stop-color:#a8a8a8;stop-opacity:0"
+ offset="1" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient39094">
+ <stop
+ id="stop39096"
+ style="stop-color:#000000;stop-opacity:1"
+ offset="0" />
+ <stop
+ id="stop39098"
+ style="stop-color:#333333;stop-opacity:1"
+ offset="1" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient39062">
+ <stop
+ id="stop39064"
+ style="stop-color:#252525;stop-opacity:1"
+ offset="0" />
+ <stop
+ id="stop39086"
+ style="stop-color:#515151;stop-opacity:1"
+ offset="0.21101321" />
+ <stop
+ id="stop39088"
+ style="stop-color:#878787;stop-opacity:1"
+ offset="0.75" />
+ <stop
+ id="stop39090"
+ style="stop-color:#6c6c6c;stop-opacity:1"
+ offset="0.875" />
+ <stop
+ id="stop39066"
+ style="stop-color:#1e1e1e;stop-opacity:1"
+ offset="1" />
+ </linearGradient>
+ <linearGradient
+ x1="4"
+ y1="40"
+ x2="124"
+ y2="60"
+ id="linearGradient39068"
+ xlink:href="#linearGradient39062"
+ gradientUnits="userSpaceOnUse" />
+ <radialGradient
+ cx="100.70589"
+ cy="96"
+ r="60"
+ fx="158.07428"
+ fy="95.718063"
+ id="radialGradient39100"
+ xlink:href="#linearGradient39094"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(2.7837903e-8,-1,0.99999999,-2.1864248e-6,-32.000004,164.7061)" />
+ <radialGradient
+ cx="100.44444"
+ cy="34.363636"
+ r="32"
+ fx="83.18"
+ fy="34.228985"
+ id="radialGradient39104"
+ xlink:href="#linearGradient39106"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(3.1472435e-6,1.0227273,-0.87499999,-9.5061964e-8,94.067865,-4.7272712)" />
+ <radialGradient
+ cx="75.999977"
+ cy="-2.7730541"
+ r="48"
+ fx="55.266491"
+ fy="-2.5338216"
+ id="radialGradient39125"
+ xlink:href="#linearGradient39119"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(0,0.83333324,-1.6666667,2.518705e-6,59.378243,-35.333302)" />
+ <radialGradient
+ cx="64.066589"
+ cy="63.713329"
+ r="60"
+ fx="64.066589"
+ fy="63.713329"
+ id="radialGradient39131"
+ xlink:href="#linearGradient39133"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(1.1333333,5.1768857e-8,5.2556881e-6,1.1666667,-8.6091298,-10.332226)" />
+ <filter
+ id="filter39153">
+ <feGaussianBlur
+ id="feGaussianBlur39155"
+ stdDeviation="2.28"
+ inkscape:collect="always" />
+ </filter>
+ <filter
+ id="filter39159">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.68"
+ id="feGaussianBlur39161" />
+ </filter>
+ </defs>
+ <g
+ id="layer1"
+ style="display:inline">
+ <path
+ d="M 29,4 C 15.147058,4 4,15.14706 4,29 l 0,70 c 0,13.85294 11.147058,25 25,25 l 70,0 c 13.85294,0 25,-11.14706 25,-25 l 0,-70 C 124,15.14706 112.85294,4 99,4 L 29,4 z"
+ id="path39151"
+ style="opacity:1;fill:#000000;fill-opacity:1;stroke:none;filter:url(#filter39153)" />
+ <path
+ d="M 29,4 C 15.147058,4 4,15.14706 4,29 l 0,70 c 0,13.85294 11.147058,25 25,25 l 70,0 c 13.85294,0 25,-11.14706 25,-25 l 0,-70 C 124,15.14706 112.85294,4 99,4 L 29,4 z"
+ id="path39157"
+ style="opacity:1;fill:#000000;fill-opacity:1;stroke:none;filter:url(#filter39159)" />
+ <rect
+ width="120"
+ height="120"
+ ry="25.00531"
+ x="4"
+ y="0"
+ id="rect2573"
+ style="opacity:1;fill:url(#radialGradient39100);fill-opacity:1;stroke:none" />
+ <path
+ d="M 29,0 C 15.147058,0 4,11.14706 4,25 l 0,70 c 0,13.85294 11.147058,25 25,25 l 70,0 c 13.85294,0 25,-11.14706 25,-25 l 0,-70 C 124,11.14706 112.85294,0 99,0 L 29,0 z"
+ id="path39127"
+ style="opacity:0.20512821;fill:url(#radialGradient39131);fill-opacity:1;stroke:none" />
+ <path
+ d="m 44,68 40,0 12,40 c -20,7.27273 -44,7.27273 -64,0 L 44,68 z"
+ id="path39102"
+ style="opacity:0.53418801;fill:url(#radialGradient39104);fill-opacity:1;stroke:none" />
+ <path
+ d="M 25.339207,12 C 52,8 76,8 102.66079,12 107.83471,12 112,16.165286 112,21.339207 L 116,52 C 100,73.339207 28,73.339207 12,52 L 16,21.339207 C 16,16.165286 20.165286,12 25.339207,12 z"
+ id="rect39116"
+ style="opacity:0.92307691;fill:url(#radialGradient39125);fill-opacity:1;stroke:none" />
+ <path
+ d="M 29,8 C 15.147058,8 4,19.14706 4,33 l 0,70 c 0,13.85294 11.147058,25 25,25 l 70,0 c 13.85294,0 25,-11.14706 25,-25 l 0,-70 C 124,19.14706 112.85294,8 99,8 L 29,8 z"
+ id="path39147"
+ style="opacity:0.20512821;fill:#000000;fill-opacity:1;stroke:none" />
+ <path
+ d="M 29,0 C 15.147058,0 4,11.147058 4,25 l 0,70 c 0,13.85294 11.147058,25 25,25 l 70,0 c 13.85294,0 25,-11.14706 25,-25 l 0,-70 C 124,11.147058 112.85294,0 99,0 L 29,0 z m 0,4 70,0 c 11.70613,0 21,9.293869 21,21 l 0,70 c 0,11.70613 -9.29387,21 -21,21 l -70,0 C 17.293869,116 8,106.70613 8,95 L 8,25 C 8,13.293869 17.293869,4 29,4 z"
+ id="rect39029"
+ style="opacity:1;fill:url(#linearGradient39068);fill-opacity:1;stroke:none" />
+ <path
+ d="M 66.35081,74.771345 A 36,36 0 1 1 54.34964,35.777782"
+ transform="matrix(-0.16680323,0.53082142,-0.53082142,-0.16680323,103.31027,53.117897)"
+ id="path3351"
+ style="opacity:1;fill:none;stroke:#ffffff;stroke-width:21.56673813;stroke-linecap:round;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" />
+ <path
+ d="m 36,56 a 4,4 0 1 1 -8,0 4,4 0 1 1 8,0 z"
+ transform="matrix(1.4851301,0,0,1.4851301,16.475837,-23.948973)"
+ id="path3353"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;stroke:none" />
+ <path
+ d="M 66.35081,74.771345 A 36,36 0 1 1 54.34964,35.777782"
+ transform="matrix(-0.35033273,1.1148712,-1.1148712,-0.35033273,146.5624,46.88078)"
+ id="path2622"
+ style="opacity:1;fill:none;stroke:#ffffff;stroke-width:10.26852894;stroke-linecap:round;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none" />
+ </g>
+</svg>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons_png.qrc b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons_png.qrc
new file mode 100755
index 0000000..9a30b7f
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/icons_png.qrc
@@ -0,0 +1,9 @@
+<RCC>
+ <qresource prefix="/icons" >
+ <file alias="wpa_gui.png">icons/hicolor/16x16/apps/wpa_gui.png</file>
+ <file alias="ap.png">icons/hicolor/32x32/apps/ap.png</file>
+ <file alias="laptop.png">icons/hicolor/32x32/apps/laptop.png</file>
+ <file alias="group.png">icons/hicolor/32x32/apps/group.png</file>
+ <file alias="invitation.png">icons/hicolor/32x32/apps/invitation.png</file>
+ </qresource>
+</RCC>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/lang/wpa_gui_de.ts b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/lang/wpa_gui_de.ts
new file mode 100755
index 0000000..d7a9c89
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/lang/wpa_gui_de.ts
@@ -0,0 +1,1262 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!DOCTYPE TS>
+<TS version="2.0" language="de_DE" sourcelanguage="en_US">
+<context>
+ <name>AddInterface</name>
+ <message>
+ <location filename="../addinterface.cpp" line="38"/>
+ <source>Select network interface to add</source>
+ <translation>Wähle die Netzwerkschnittstelle zum hinzufügen aus</translation>
+ </message>
+ <message>
+ <location filename="../addinterface.cpp" line="47"/>
+ <source>driver</source>
+ <translation>Treiber</translation>
+ </message>
+ <message>
+ <location filename="../addinterface.cpp" line="48"/>
+ <source>interface</source>
+ <translation>Schnittstelle</translation>
+ </message>
+ <message>
+ <location filename="../addinterface.cpp" line="49"/>
+ <source>description</source>
+ <translation>Beschreibung</translation>
+ </message>
+ <message>
+ <location filename="../addinterface.cpp" line="221"/>
+ <source>Add interface command could not be completed.</source>
+ <translation>Das Schnittstellen hinzufügen Kommando konnte nicht abgeschlossen werden.</translation>
+ </message>
+ <message>
+ <location filename="../addinterface.cpp" line="229"/>
+ <source>Failed to add the interface.</source>
+ <translation>Fehler beim hinzufügen der Schnittstelle.</translation>
+ </message>
+ <message>
+ <location filename="../addinterface.cpp" line="238"/>
+ <source>Failed to add the interface into registry.</source>
+ <translation>Fehler beim hinzufügen der Schnittstelle in die Registry.</translation>
+ </message>
+</context>
+<context>
+ <name>ErrorMsg</name>
+ <message>
+ <location filename="../wpagui.cpp" line="1621"/>
+ <source>wpa_gui error</source>
+ <translation>wpa_gui Fehler</translation>
+ </message>
+</context>
+<context>
+ <name>EventHistory</name>
+ <message>
+ <location filename="../eventhistory.ui" line="13"/>
+ <source>Event history</source>
+ <translation>Ereignis Historie</translation>
+ </message>
+ <message>
+ <location filename="../eventhistory.ui" line="48"/>
+ <source>Close</source>
+ <translation>Schließen</translation>
+ </message>
+</context>
+<context>
+ <name>EventListModel</name>
+ <message>
+ <location filename="../eventhistory.cpp" line="62"/>
+ <source>Timestamp</source>
+ <translation>Zeit</translation>
+ </message>
+ <message>
+ <location filename="../eventhistory.cpp" line="64"/>
+ <source>Message</source>
+ <translation>Meldung</translation>
+ </message>
+</context>
+<context>
+ <name>NetworkConfig</name>
+ <message>
+ <location filename="../networkconfig.ui" line="13"/>
+ <source>NetworkConfig</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="19"/>
+ <source>Cancel</source>
+ <translation>Abbrechen</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="35"/>
+ <source>SSID</source>
+ <translation>SSID</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="42"/>
+ <source>Network name (Service Set IDentifier)</source>
+ <translation>Netzwerkname (Service Set IDentifier)</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="52"/>
+ <source>Authentication</source>
+ <translation>Authentifizierung</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="60"/>
+ <source>Plaintext (open / no authentication)</source>
+ <translation>Plaintext (offen / keine Authentifizierung)</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="65"/>
+ <source>Static WEP (no authentication)</source>
+ <translation>Static WEP (keine Authentifizierung)</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="70"/>
+ <source>Static WEP (Shared Key authentication)</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="75"/>
+ <source>IEEE 802.1X</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="80"/>
+ <source>WPA-Personal (PSK)</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="85"/>
+ <source>WPA-Enterprise (EAP)</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="90"/>
+ <source>WPA2-Personal (PSK)</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="95"/>
+ <source>WPA2-Enterprise (EAP)</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="103"/>
+ <source>Encryption</source>
+ <translation>Verschlüsselung</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="111"/>
+ <source>None</source>
+ <translation>Keine</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="116"/>
+ <source>WEP</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="121"/>
+ <source>TKIP</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="126"/>
+ <source>CCMP</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="134"/>
+ <source>PSK</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="144"/>
+ <source>WPA/WPA2 pre-shared key or passphrase</source>
+ <translation>WPA/WPA2 Pre-Shared Key oder Passphrase</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="157"/>
+ <source>EAP method</source>
+ <translation>EAP Verfahren</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="171"/>
+ <source>Identity</source>
+ <translation>Identität</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="181"/>
+ <source>Username/Identity for EAP methods</source>
+ <translation>Nutzername/Identitär für die EAP Verfahren</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="188"/>
+ <source>Password</source>
+ <translation>Passwort</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="198"/>
+ <source>Password for EAP methods</source>
+ <translation>Passwort für die EAP Verfahren</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="208"/>
+ <source>CA certificate</source>
+ <translation>CA Zertifikat</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="225"/>
+ <source>WEP keys</source>
+ <translation>WEP Schlüssel</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="234"/>
+ <source>key 0</source>
+ <translation>Schlüssel 0</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="244"/>
+ <source>key 1</source>
+ <translation>Schlüssel 1</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="254"/>
+ <source>key 3</source>
+ <translation>Schlüssel 3</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="264"/>
+ <source>key 2</source>
+ <translation>Schlüssel 2</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="305"/>
+ <source>Optional Settings</source>
+ <translation>Optionale Einstellungen</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="311"/>
+ <source>Network Identification String</source>
+ <translation>Netzwerk Indentifikations Zeichenfolge</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="318"/>
+ <source>Network Priority</source>
+ <translation>Netzwerk Priorität</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="331"/>
+ <source>IDString</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="338"/>
+ <source>Priority</source>
+ <translation>Priorität</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="345"/>
+ <source>Inner auth</source>
+ <translation>Geheime Auth</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="365"/>
+ <source>Add</source>
+ <translation>Hinzufügen</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="375"/>
+ <source>Remove</source>
+ <translation>Entfernen</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.ui" line="398"/>
+ <source>WPS</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.cpp" line="202"/>
+ <source>WPA Pre-Shared Key Error</source>
+ <translation>WPA Pre Shared Key Fehler</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.cpp" line="203"/>
+ <source>WPA-PSK requires a passphrase of 8 to 63 characters
+or 64 hex digit PSK</source>
+ <translation>WPA PSK benötigt ein Passphrase mit 8 bis 63 Zeichen
+oder 64 hexadezimal stelligen PSK</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.cpp" line="215"/>
+ <source>Network ID Error</source>
+ <translation>Netzwerk ID Fehler</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.cpp" line="216"/>
+ <source>Network ID String contains non-word characters.
+It must be a simple string, without spaces, containing
+only characters in this range: [A-Za-z0-9_-]
+</source>
+ <translation>Netzwerk ID Zeichnfolge beinhaltet ungültige Zeichen.
+Es muss eine einfache Zeichnfolge aus [A-Za-z0-9_] ohne
+Leerzeichen sein
+</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.cpp" line="237"/>
+ <source>Failed to add network to wpa_supplicant
+configuration.</source>
+ <translation>Hinzufügen des Netzwerks in die wpa_supplicant
+Konfiguration fehlgeschlagen.</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.cpp" line="414"/>
+ <source>Failed to enable network in wpa_supplicant
+configuration.</source>
+ <translation>Aktivieren des Netzwerks in der wpa_supplicant
+Konfiguration fehlgeschlagen.</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.cpp" line="802"/>
+ <source>This will permanently remove the network
+from the configuration. Do you really want
+to remove this network?</source>
+ <translation>Dies wird das Netzwerk permanent aus
+der Konfiguration entfernen. Möchtest du
+das Netzwerk wirklich entfernen?</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.cpp" line="805"/>
+ <source>Yes</source>
+ <translation>Ja</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.cpp" line="805"/>
+ <source>No</source>
+ <translation>Nein</translation>
+ </message>
+ <message>
+ <location filename="../networkconfig.cpp" line="813"/>
+ <source>Failed to remove network from wpa_supplicant
+configuration.</source>
+ <translation>Entfernen des Netzwerks aus der wpa_supplicant
+Konfiguration fehlgeschlagen.</translation>
+ </message>
+</context>
+<context>
+ <name>Peers</name>
+ <message>
+ <location filename="../peers.ui" line="14"/>
+ <source>Peers</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="107"/>
+ <source>Associated station</source>
+ <translation>Verbundene Stationen</translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="110"/>
+ <source>AP</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="113"/>
+ <source>WPS AP</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="116"/>
+ <source>WPS PIN needed</source>
+ <translation>WPS PIN wird benötigt</translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="119"/>
+ <source>ER: WPS AP</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="122"/>
+ <source>ER: WPS AP (Unconfigured)</source>
+ <translation>ER: WPS AP (nicht konfiguriert)</translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="125"/>
+ <source>ER: WPS Enrollee</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="128"/>
+ <source>WPS Enrollee</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="159"/>
+ <source>Enter WPS PIN</source>
+ <translation>WPS PIN Eingabe</translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="164"/>
+ <source>Connect (PBC)</source>
+ <translation>Verbinden (PBC)</translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="172"/>
+ <source>Enroll (PBC)</source>
+ <translation>Anmelden (PBC)</translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="177"/>
+ <source>Learn Configuration</source>
+ <translation>Konfiguration lernen</translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="181"/>
+ <source>Properties</source>
+ <translation>Eigenschaften</translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="184"/>
+ <source>Refresh</source>
+ <translation>Aktualisieren</translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="205"/>
+ <source>PIN:</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="206"/>
+ <source>PIN for </source>
+ <translation>Pin für </translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="227"/>
+ <source>Failed to set the WPS PIN.</source>
+ <translation>Setzten des WPS PIN fehlgeschlagen.</translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="815"/>
+ <source>Peer Properties</source>
+ <translation>Peer Eigenschaften</translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="820"/>
+ <source>Name: </source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="827"/>
+ <source>Address: </source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="831"/>
+ <source>UUID: </source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="835"/>
+ <source>Primary Device Type: </source>
+ <translation>Primärer Geräte Typ: </translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="840"/>
+ <source>SSID: </source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="845"/>
+ <source>Configuration Methods: </source>
+ <translation>Konfigurationsverfahren: </translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="847"/>
+ <source>[USBA]</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="849"/>
+ <source>[Ethernet]</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="851"/>
+ <source>[Label]</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="853"/>
+ <source>[Display]</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="855"/>
+ <source>[Ext. NFC Token]</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="857"/>
+ <source>[Int. NFC Token]</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="859"/>
+ <source>[NFC Interface]</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="861"/>
+ <source>[Push Button]</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="863"/>
+ <source>[Keypad]</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="869"/>
+ <source>Device Password ID: </source>
+ <translation>Geräte Passwort ID: </translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="872"/>
+ <source> (Default PIN)</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="875"/>
+ <source> (User-specified PIN)</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="878"/>
+ <source> (Machine-specified PIN)</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="881"/>
+ <source> (Rekey)</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="884"/>
+ <source> (Push Button)</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="887"/>
+ <source> (Registrar-specified)</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="924"/>
+ <source>Failed to start WPS PBC.</source>
+ <translation>Starten von WPS PBC fehlgeschlagen.</translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="937"/>
+ <source>AP PIN:</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="938"/>
+ <source>AP PIN for </source>
+ <translation>AP PIN für </translation>
+ </message>
+ <message>
+ <location filename="../peers.cpp" line="953"/>
+ <source>Failed to start learning AP configuration.</source>
+ <translation>Fehler beim erkennen der AP Konfiguration.</translation>
+ </message>
+</context>
+<context>
+ <name>ScanResults</name>
+ <message>
+ <location filename="../scanresults.ui" line="13"/>
+ <source>Scan results</source>
+ <translation>Scan Ergebnisse</translation>
+ </message>
+ <message>
+ <location filename="../scanresults.ui" line="32"/>
+ <source>SSID</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../scanresults.ui" line="37"/>
+ <source>BSSID</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../scanresults.ui" line="42"/>
+ <source>frequency</source>
+ <translation>Frequenz</translation>
+ </message>
+ <message>
+ <location filename="../scanresults.ui" line="47"/>
+ <source>signal</source>
+ <translation>Signal</translation>
+ </message>
+ <message>
+ <location filename="../scanresults.ui" line="52"/>
+ <source>flags</source>
+ <translation>Flags</translation>
+ </message>
+ <message>
+ <location filename="../scanresults.ui" line="75"/>
+ <source>Scan</source>
+ <translation>Scannen</translation>
+ </message>
+ <message>
+ <location filename="../scanresults.ui" line="82"/>
+ <source>Close</source>
+ <translation>Schließen</translation>
+ </message>
+</context>
+<context>
+ <name>UserDataRequest</name>
+ <message>
+ <location filename="../userdatarequest.ui" line="16"/>
+ <source>Authentication credentials required</source>
+ <translation>Authentifzierungs Beglaubigung nötig</translation>
+ </message>
+ <message>
+ <location filename="../userdatarequest.ui" line="77"/>
+ <source>&OK</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../userdatarequest.ui" line="93"/>
+ <source>&Cancel</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../userdatarequest.cpp" line="67"/>
+ <source>Password: </source>
+ <translation>Passwort: </translation>
+ </message>
+ <message>
+ <location filename="../userdatarequest.cpp" line="70"/>
+ <source>New password: </source>
+ <translation>Neues Passwort: </translation>
+ </message>
+ <message>
+ <location filename="../userdatarequest.cpp" line="73"/>
+ <source>Identity: </source>
+ <translation>Identität: </translation>
+ </message>
+ <message>
+ <location filename="../userdatarequest.cpp" line="75"/>
+ <source>Private key passphrase: </source>
+ <translation>Privater Key Passphrase: </translation>
+ </message>
+</context>
+<context>
+ <name>WpaGui</name>
+ <message>
+ <location filename="../wpagui.ui" line="13"/>
+ <source>wpa_gui</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="24"/>
+ <source>Adapter:</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="34"/>
+ <source>Network:</source>
+ <translation>Netzwerk:</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="48"/>
+ <source>Current Status</source>
+ <translation>Aktueller Status</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="63"/>
+ <location filename="../wpagui.ui" line="300"/>
+ <source>Status:</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="70"/>
+ <source>Last message:</source>
+ <translation>Letzte Meldung:</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="77"/>
+ <source>Authentication:</source>
+ <translation>Authentifizierung:</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="84"/>
+ <source>Encryption:</source>
+ <translation>Verschlüsselung:</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="91"/>
+ <source>SSID:</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="98"/>
+ <source>BSSID:</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="105"/>
+ <source>IP address:</source>
+ <translation>IP Adresse:</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="177"/>
+ <source>Connect</source>
+ <translation>Verbinden</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="184"/>
+ <source>Disconnect</source>
+ <translation>Trennen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="191"/>
+ <location filename="../wpagui.ui" line="286"/>
+ <source>Scan</source>
+ <translation>Scannen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="212"/>
+ <source>Manage Networks</source>
+ <translation>Netzwerke verwalten</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="238"/>
+ <source>Enabled</source>
+ <translation>Aktiviert</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="245"/>
+ <source>Edit</source>
+ <translation>Bearbeiten</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="252"/>
+ <source>Remove</source>
+ <translation>Entfernen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="272"/>
+ <source>Disabled</source>
+ <translation>Deaktiviert</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="279"/>
+ <source>Add</source>
+ <translation>Hinzufügen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="294"/>
+ <source>WPS</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="314"/>
+ <source>PBC - push button</source>
+ <translation>PBC - Taste</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="321"/>
+ <source>Generate PIN</source>
+ <translation>PIN erzeugen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="328"/>
+ <source>PIN:</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="348"/>
+ <source>Use AP PIN</source>
+ <translation>AP PIN verwenden</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="355"/>
+ <source>AP PIN:</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="390"/>
+ <source>&File</source>
+ <translation>&Datei</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="401"/>
+ <source>&Network</source>
+ <translation>&Netzwerk</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="413"/>
+ <source>&Help</source>
+ <translation>&Hilfe</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="426"/>
+ <source>Event &History</source>
+ <translation>Ereignis &Historie</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="431"/>
+ <source>&Save Configuration</source>
+ <translation>Konfiguration &Speichern</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="434"/>
+ <source>Ctrl+S</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="439"/>
+ <source>E&xit</source>
+ <translation>&Beenden</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="442"/>
+ <source>Ctrl+Q</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="447"/>
+ <source>&Add</source>
+ <translation>&Hinzufügen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="452"/>
+ <source>&Edit</source>
+ <translation>&Bearbeiten</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="457"/>
+ <source>&Remove</source>
+ <translation>&Entfernen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="462"/>
+ <source>E&nable All</source>
+ <translation>Alle &aktivieren</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="467"/>
+ <source>&Disable All</source>
+ <translation>Alle &deaktivieren</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="472"/>
+ <source>Re&move All</source>
+ <translation>Alle &entfernen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="480"/>
+ <source>&Contents...</source>
+ <translation>&Inhalt...</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="488"/>
+ <source>&Index...</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="493"/>
+ <source>&About</source>
+ <translation>&Über</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="501"/>
+ <source>&Wi-Fi Protected Setup</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../wpagui.ui" line="506"/>
+ <source>&Peers</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="53"/>
+ <source>Stop Service</source>
+ <translation>Dienst stoppen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="58"/>
+ <source>Start Service</source>
+ <translation>Dienst starten</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="67"/>
+ <source>Add Interface</source>
+ <translation>Schnittstelle hinzufügen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="167"/>
+ <source>connecting to wpa_supplicant</source>
+ <translation>Verbindungsaufbau zu wpa_supplicant</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="343"/>
+ <source>wpa_supplicant service is not running.
+Do you want to start it?</source>
+ <translation>wpa_supplicant ist nicht gestartet.
+Möchtest du ihn starten?</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="466"/>
+ <source>Disconnected</source>
+ <translation>Getrennt</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="468"/>
+ <source>Inactive</source>
+ <translation>Inaktiv</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="470"/>
+ <source>Scanning</source>
+ <translation>Scannen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="472"/>
+ <source>Authenticating</source>
+ <translation>Authentifizieren</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="474"/>
+ <source>Associating</source>
+ <translation>Assoziieren</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="476"/>
+ <source>Associated</source>
+ <translation>Assoziiert</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="478"/>
+ <source>4-Way Handshake</source>
+ <translation>4-Wege Handshake</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="480"/>
+ <source>Group Handshake</source>
+ <translation>Gruppen Handshake</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="482"/>
+ <source>Completed</source>
+ <translation>Abgeschlossen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="484"/>
+ <source>Unknown</source>
+ <translation>Unbekannt</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="497"/>
+ <source>Could not get status from wpa_supplicant</source>
+ <translation>Status konnte nicht von wpa_supplicant abgerufen werden</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="512"/>
+ <source>No network interfaces in use.
+Would you like to add one?</source>
+ <translation>Es ist keine Netzwerkschnittstelle in verwendung.
+Möchtest du eine hinzufügen?</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="682"/>
+ <location filename="../wpagui.cpp" line="974"/>
+ <location filename="../wpagui.cpp" line="1039"/>
+ <location filename="../wpagui.cpp" line="1117"/>
+ <source>Select any network</source>
+ <translation>Wähle beliebiges Netzwerk</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="883"/>
+ <source>Disconnected from network.</source>
+ <translation>Getrennt vom Netzwerk.</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="886"/>
+ <source>Connection to network established.</source>
+ <translation>Verbindung zum Netzwerk wurde aufgebaut.</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="890"/>
+ <location filename="../wpagui.cpp" line="1523"/>
+ <source>WPS AP in active PBC mode found</source>
+ <translation>WPS AP im aktiven PBC Modus gefunden</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="894"/>
+ <source>Press the PBC button on the screen to start registration</source>
+ <translation>Drücke den PBC Knopf auf dem Bildschirm um die Registrierung zu starten</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="897"/>
+ <source>WPS AP with recently selected registrar</source>
+ <translation>WPS AP mit kürzlich ausgewähltem Registrator</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="903"/>
+ <source>WPS AP detected</source>
+ <translation>WPS AP erkannt</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="905"/>
+ <source>PBC mode overlap detected</source>
+ <translation>PBC Modus Overlap erkannt</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="906"/>
+ <source>More than one AP is currently in active WPS PBC mode. Wait couple of minutes and try again</source>
+ <translation>Mehr als ein AP ist momentan im aktiven WPS PBC Modus. Versuch es in ein paar Minuten nochmal</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="911"/>
+ <source>Network configuration received</source>
+ <translation>Netzwerk Konfiguration empfangen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="915"/>
+ <source>Registration started</source>
+ <translation>Registrierung gestartet</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="917"/>
+ <source>Registrar does not yet know PIN</source>
+ <translation>Registrator kennt den PIN noch nicht</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="919"/>
+ <source>Registration failed</source>
+ <translation>Registrierung fehlgeschlagen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="921"/>
+ <source>Registration succeeded</source>
+ <translation>Registrierung erfolgreich</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1069"/>
+ <location filename="../wpagui.cpp" line="1138"/>
+ <source>No Networks</source>
+ <translation>Keine Netzwerke</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1070"/>
+ <source>There are no networks to edit.
+</source>
+ <translation>Keine Netzwerke zum bearbeiten.
+</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1081"/>
+ <location filename="../wpagui.cpp" line="1151"/>
+ <source>Select A Network</source>
+ <translation>Wähle ein Netzwerk</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1082"/>
+ <source>Select a network from the list to edit it.
+</source>
+ <translation>Wähle ein Netzwerk aus der Liste zum bearbeiten.
+</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1139"/>
+ <source>There are no networks to remove.
+</source>
+ <translation>Es sind keine Netzwerke zum entfernen vorhanden.
+</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1152"/>
+ <source>Select a network from the list to remove it.
+</source>
+ <translation>Wähle ein Netzwerk aus der Liste zum entfernen.
+</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1264"/>
+ <source>Failed to save configuration</source>
+ <translation>Speichern der Konfiguration fehlgeschlagen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1265"/>
+ <source>The configuration could not be saved.
+
+The update_config=1 configuration option
+must be used for configuration saving to
+be permitted.
+</source>
+ <translation>Die Konfiguration konnte nicht gespeichert werden.
+
+Die Einstellung update_config=1 muss gesetzt sein,
+damit Konfigurationen gespeichert werden können.
+</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1272"/>
+ <source>Saved configuration</source>
+ <translation>Konfiguration gespeichert</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1273"/>
+ <source>The current configuration was saved.
+</source>
+ <translation>Die aktuelle Konfiguration wurde gespeichert.
+</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1293"/>
+ <source> - wpa_supplicant user interface</source>
+ <translation> - wpa_supplicant Benutzerschnittstelle</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1307"/>
+ <source>&Disconnect</source>
+ <translation>&Trennen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1308"/>
+ <source>Re&connect</source>
+ <translation>&Wiederverbinden</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1317"/>
+ <source>&Event History</source>
+ <translation>&Ereignis Historie</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1318"/>
+ <source>Scan &Results</source>
+ <translation>Scan E&rgebnisse</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1319"/>
+ <source>S&tatus</source>
+ <translation></translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1328"/>
+ <source>&Show Window</source>
+ <translation>&Fenster anzeigen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1329"/>
+ <source>&Hide Window</source>
+ <translation>&Fenster ausblenden</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1330"/>
+ <source>&Quit</source>
+ <translation>&Beenden</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1462"/>
+ <source> will keep running in the system tray.</source>
+ <translation> wird weiterhin in der System Ablage laufen.</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1466"/>
+ <source> systray</source>
+ <translation>System Ablage</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1467"/>
+ <source>The program will keep running in the system tray.</source>
+ <translation>Das Programm wird weiterhin in der System Ablage laufen.</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1524"/>
+ <source>Press the push button on the AP to start the PBC mode.</source>
+ <translation>Drücke die Taste am AP um den PBC Modus zu starten.</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1527"/>
+ <source>If you have not yet done so, press the push button on the AP to start the PBC mode.</source>
+ <translation>Wenn Sie es noch nicht getan haben, so drücken Sie die Taste am AP um den PBC Modus zu starten.</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1531"/>
+ <location filename="../wpagui.cpp" line="1551"/>
+ <source>Waiting for Registrar</source>
+ <translation>Warte auf Registrator</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1548"/>
+ <source>Enter the generated PIN into the Registrar (either the internal one in the AP or an external one).</source>
+ <translation>Geben Sie den generierten PIN in der Registrierungsstelle ein (entweder der interne oder der externe im AP).</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1561"/>
+ <source>WPS AP selected from scan results</source>
+ <translation>WPS AP ausgewählt aus Scan Ergebnissen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1562"/>
+ <source>If you want to use an AP device PIN, e.g., from a label in the device, enter the eight digit AP PIN and click Use AP PIN button.</source>
+ <translation>Wenn Sie einen AP Geräte PIN verwenden möchten, z.B.: von einem Aufkleber am Gerät, geben Sie denn acht stelligen AP PIN ein und klicken Sie auf den AP PIN Knopf.</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1583"/>
+ <source>Waiting for AP/Enrollee</source>
+ <translation>Warte auf AP/Bewerber</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1591"/>
+ <source>Connected to the network</source>
+ <translation>Verbunden zum Netzwerk</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1592"/>
+ <source>Stopped</source>
+ <translation>Gestoppt</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1651"/>
+ <location filename="../wpagui.cpp" line="1679"/>
+ <source>OpenSCManager failed</source>
+ <translation>OpenSCManager fehlgeschlagen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1657"/>
+ <location filename="../wpagui.cpp" line="1685"/>
+ <source>OpenService failed</source>
+ <translation>OpenService fehlgeschlagen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1663"/>
+ <source>Failed to start wpa_supplicant service</source>
+ <translation>Starten des wpa_supplicant Dienstes fehlgeschlagen</translation>
+ </message>
+ <message>
+ <location filename="../wpagui.cpp" line="1691"/>
+ <source>Failed to stop wpa_supplicant service</source>
+ <translation>Stoppen des wpa_supplicant Dienstes fehlgeschlagen</translation>
+ </message>
+ <message>
+ <source>OpenSCManager failed: %d
+</source>
+ <translation type="obsolete">OpenSCManager fehlgeschlagen: %d
+</translation>
+ </message>
+ <message>
+ <source>OpenService failed: %d
+
+</source>
+ <translation type="obsolete">OpenService fehlgeschlagen: %d
+
+</translation>
+ </message>
+</context>
+</TS>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/main.cpp b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/main.cpp
new file mode 100755
index 0000000..bbd45c6
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/main.cpp
@@ -0,0 +1,67 @@
+/*
+ * wpa_gui - Application startup
+ * Copyright (c) 2005-2006, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifdef CONFIG_NATIVE_WINDOWS
+#include <winsock.h>
+#endif /* CONFIG_NATIVE_WINDOWS */
+#include <QApplication>
+#include <QtCore/QLibraryInfo>
+#include <QtCore/QTranslator>
+#include "wpagui.h"
+
+WpaGuiApp::WpaGuiApp(int &argc, char **argv) :
+ QApplication(argc, argv),
+ argc(argc),
+ argv(argv)
+{
+ w = NULL;
+}
+
+#if !defined(QT_NO_SESSIONMANAGER) && QT_VERSION < 0x050000
+void WpaGuiApp::saveState(QSessionManager &manager)
+{
+ QApplication::saveState(manager);
+ w->saveState();
+}
+#endif
+
+
+int main(int argc, char *argv[])
+{
+ WpaGuiApp app(argc, argv);
+ QTranslator translator;
+ QString locale;
+ QString resourceDir;
+ int ret;
+
+ locale = QLocale::system().name();
+ resourceDir = QLibraryInfo::location(QLibraryInfo::TranslationsPath);
+ if (!translator.load("wpa_gui_" + locale, resourceDir))
+ translator.load("wpa_gui_" + locale, "lang");
+ app.installTranslator(&translator);
+
+ WpaGui w(&app);
+
+#ifdef CONFIG_NATIVE_WINDOWS
+ WSADATA wsaData;
+ if (WSAStartup(MAKEWORD(2, 0), &wsaData)) {
+ /* printf("Could not find a usable WinSock.dll\n"); */
+ return -1;
+ }
+#endif /* CONFIG_NATIVE_WINDOWS */
+
+ app.w = &w;
+
+ ret = app.exec();
+
+#ifdef CONFIG_NATIVE_WINDOWS
+ WSACleanup();
+#endif /* CONFIG_NATIVE_WINDOWS */
+
+ return ret;
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/networkconfig.cpp b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/networkconfig.cpp
new file mode 100755
index 0000000..2727318
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/networkconfig.cpp
@@ -0,0 +1,853 @@
+/*
+ * wpa_gui - NetworkConfig class
+ * Copyright (c) 2005-2006, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include <cstdio>
+#include <QMessageBox>
+
+#include "networkconfig.h"
+#include "wpagui.h"
+
+enum {
+ AUTH_NONE_OPEN,
+ AUTH_NONE_WEP,
+ AUTH_NONE_WEP_SHARED,
+ AUTH_IEEE8021X,
+ AUTH_WPA_PSK,
+ AUTH_WPA_EAP,
+ AUTH_WPA2_PSK,
+ AUTH_WPA2_EAP
+};
+
+#define WPA_GUI_KEY_DATA "[key is configured]"
+
+
+NetworkConfig::NetworkConfig(QWidget *parent, const char *, bool,
+ Qt::WindowFlags)
+ : QDialog(parent)
+{
+ setupUi(this);
+
+ encrSelect->setEnabled(false);
+ connect(authSelect, SIGNAL(activated(int)), this,
+ SLOT(authChanged(int)));
+ connect(cancelButton, SIGNAL(clicked()), this, SLOT(close()));
+ connect(addButton, SIGNAL(clicked()), this, SLOT(addNetwork()));
+ connect(encrSelect, SIGNAL(activated(const QString &)), this,
+ SLOT(encrChanged(const QString &)));
+ connect(removeButton, SIGNAL(clicked()), this, SLOT(removeNetwork()));
+ connect(eapSelect, SIGNAL(activated(int)), this,
+ SLOT(eapChanged(int)));
+ connect(useWpsButton, SIGNAL(clicked()), this, SLOT(useWps()));
+
+ wpagui = NULL;
+ new_network = false;
+}
+
+
+NetworkConfig::~NetworkConfig()
+{
+}
+
+
+void NetworkConfig::languageChange()
+{
+ retranslateUi(this);
+}
+
+
+void NetworkConfig::paramsFromScanResults(QTreeWidgetItem *sel)
+{
+ new_network = true;
+
+ /* SSID BSSID frequency signal flags */
+ setWindowTitle(sel->text(0));
+ ssidEdit->setText(sel->text(0));
+
+ QString flags = sel->text(4);
+ int auth, encr = 0;
+ if (flags.indexOf("[WPA2-EAP") >= 0)
+ auth = AUTH_WPA2_EAP;
+ else if (flags.indexOf("[WPA-EAP") >= 0)
+ auth = AUTH_WPA_EAP;
+ else if (flags.indexOf("[WPA2-PSK") >= 0)
+ auth = AUTH_WPA2_PSK;
+ else if (flags.indexOf("[WPA-PSK") >= 0)
+ auth = AUTH_WPA_PSK;
+ else
+ auth = AUTH_NONE_OPEN;
+
+ if (flags.indexOf("-CCMP") >= 0)
+ encr = 1;
+ else if (flags.indexOf("-TKIP") >= 0)
+ encr = 0;
+ else if (flags.indexOf("WEP") >= 0) {
+ encr = 1;
+ if (auth == AUTH_NONE_OPEN)
+ auth = AUTH_NONE_WEP;
+ } else
+ encr = 0;
+
+ authSelect->setCurrentIndex(auth);
+ authChanged(auth);
+ encrSelect->setCurrentIndex(encr);
+
+ wepEnabled(auth == AUTH_NONE_WEP);
+
+ getEapCapa();
+
+ if (flags.indexOf("[WPS") >= 0)
+ useWpsButton->setEnabled(true);
+ bssid = sel->text(1);
+}
+
+
+void NetworkConfig::authChanged(int sel)
+{
+ encrSelect->setEnabled(sel != AUTH_NONE_OPEN && sel != AUTH_NONE_WEP &&
+ sel != AUTH_NONE_WEP_SHARED);
+ pskEdit->setEnabled(sel == AUTH_WPA_PSK || sel == AUTH_WPA2_PSK);
+ bool eap = sel == AUTH_IEEE8021X || sel == AUTH_WPA_EAP ||
+ sel == AUTH_WPA2_EAP;
+ eapSelect->setEnabled(eap);
+ identityEdit->setEnabled(eap);
+ passwordEdit->setEnabled(eap);
+ cacertEdit->setEnabled(eap);
+ phase2Select->setEnabled(eap);
+ if (eap)
+ eapChanged(eapSelect->currentIndex());
+
+ while (encrSelect->count())
+ encrSelect->removeItem(0);
+
+ if (sel == AUTH_NONE_OPEN || sel == AUTH_NONE_WEP ||
+ sel == AUTH_NONE_WEP_SHARED || sel == AUTH_IEEE8021X) {
+ encrSelect->addItem("None");
+ encrSelect->addItem("WEP");
+ encrSelect->setCurrentIndex(sel == AUTH_NONE_OPEN ? 0 : 1);
+ } else {
+ encrSelect->addItem("TKIP");
+ encrSelect->addItem("CCMP");
+ encrSelect->setCurrentIndex((sel == AUTH_WPA2_PSK ||
+ sel == AUTH_WPA2_EAP) ? 1 : 0);
+ }
+
+ wepEnabled(sel == AUTH_NONE_WEP || sel == AUTH_NONE_WEP_SHARED);
+}
+
+
+void NetworkConfig::eapChanged(int sel)
+{
+ QString prev_val = phase2Select->currentText();
+ while (phase2Select->count())
+ phase2Select->removeItem(0);
+
+ QStringList inner;
+ inner << "PEAP" << "TTLS" << "FAST";
+ if (!inner.contains(eapSelect->itemText(sel)))
+ return;
+
+ phase2Select->addItem("[ any ]");
+
+ /* Add special cases based on outer method */
+ if (eapSelect->currentText().compare("TTLS") == 0) {
+ phase2Select->addItem("PAP");
+ phase2Select->addItem("CHAP");
+ phase2Select->addItem("MSCHAP");
+ phase2Select->addItem("MSCHAPv2");
+ } else if (eapSelect->currentText().compare("FAST") == 0)
+ phase2Select->addItem("GTC(auth) + MSCHAPv2(prov)");
+
+ /* Add all enabled EAP methods that can be used in the tunnel */
+ int i;
+ QStringList allowed;
+ allowed << "MSCHAPV2" << "MD5" << "GTC" << "TLS" << "OTP" << "SIM"
+ << "AKA";
+ for (i = 0; i < eapSelect->count(); i++) {
+ if (allowed.contains(eapSelect->itemText(i))) {
+ phase2Select->addItem("EAP-" + eapSelect->itemText(i));
+ }
+ }
+
+ for (i = 0; i < phase2Select->count(); i++) {
+ if (phase2Select->itemText(i).compare(prev_val) == 0) {
+ phase2Select->setCurrentIndex(i);
+ break;
+ }
+ }
+}
+
+
+void NetworkConfig::addNetwork()
+{
+ char reply[10], cmd[256];
+ size_t reply_len;
+ int id;
+ int psklen = pskEdit->text().length();
+ int auth = authSelect->currentIndex();
+
+ if (auth == AUTH_WPA_PSK || auth == AUTH_WPA2_PSK) {
+ if (psklen < 8 || psklen > 64) {
+ QMessageBox::warning(
+ this,
+ tr("WPA Pre-Shared Key Error"),
+ tr("WPA-PSK requires a passphrase of 8 to 63 "
+ "characters\n"
+ "or 64 hex digit PSK"));
+ pskEdit->setFocus();
+ return;
+ }
+ }
+
+ if (idstrEdit->isEnabled() && !idstrEdit->text().isEmpty()) {
+ QRegExp rx("^(\\w|-)+$");
+ if (rx.indexIn(idstrEdit->text()) < 0) {
+ QMessageBox::warning(
+ this, tr("Network ID Error"),
+ tr("Network ID String contains non-word "
+ "characters.\n"
+ "It must be a simple string, "
+ "without spaces, containing\n"
+ "only characters in this range: "
+ "[A-Za-z0-9_-]\n"));
+ idstrEdit->setFocus();
+ return;
+ }
+ }
+
+ if (wpagui == NULL)
+ return;
+
+ memset(reply, 0, sizeof(reply));
+ reply_len = sizeof(reply) - 1;
+
+ if (new_network) {
+ wpagui->ctrlRequest("ADD_NETWORK", reply, &reply_len);
+ if (reply[0] == 'F') {
+ QMessageBox::warning(this, "wpa_gui",
+ tr("Failed to add "
+ "network to wpa_supplicant\n"
+ "configuration."));
+ return;
+ }
+ id = atoi(reply);
+ } else
+ id = edit_network_id;
+
+ setNetworkParam(id, "ssid", ssidEdit->text().toLocal8Bit().constData(),
+ true);
+
+ const char *key_mgmt = NULL, *proto = NULL, *pairwise = NULL;
+ switch (auth) {
+ case AUTH_NONE_OPEN:
+ case AUTH_NONE_WEP:
+ case AUTH_NONE_WEP_SHARED:
+ key_mgmt = "NONE";
+ break;
+ case AUTH_IEEE8021X:
+ key_mgmt = "IEEE8021X";
+ break;
+ case AUTH_WPA_PSK:
+ key_mgmt = "WPA-PSK";
+ proto = "WPA";
+ break;
+ case AUTH_WPA_EAP:
+ key_mgmt = "WPA-EAP";
+ proto = "WPA";
+ break;
+ case AUTH_WPA2_PSK:
+ key_mgmt = "WPA-PSK";
+ proto = "WPA2";
+ break;
+ case AUTH_WPA2_EAP:
+ key_mgmt = "WPA-EAP";
+ proto = "WPA2";
+ break;
+ }
+
+ if (auth == AUTH_NONE_WEP_SHARED)
+ setNetworkParam(id, "auth_alg", "SHARED", false);
+ else
+ setNetworkParam(id, "auth_alg", "OPEN", false);
+
+ if (auth == AUTH_WPA_PSK || auth == AUTH_WPA_EAP ||
+ auth == AUTH_WPA2_PSK || auth == AUTH_WPA2_EAP) {
+ int encr = encrSelect->currentIndex();
+ if (encr == 0)
+ pairwise = "TKIP";
+ else
+ pairwise = "CCMP";
+ }
+
+ if (proto)
+ setNetworkParam(id, "proto", proto, false);
+ if (key_mgmt)
+ setNetworkParam(id, "key_mgmt", key_mgmt, false);
+ if (pairwise) {
+ setNetworkParam(id, "pairwise", pairwise, false);
+ setNetworkParam(id, "group", "TKIP CCMP WEP104 WEP40", false);
+ }
+ if (pskEdit->isEnabled() &&
+ strcmp(pskEdit->text().toLocal8Bit().constData(),
+ WPA_GUI_KEY_DATA) != 0)
+ setNetworkParam(id, "psk",
+ pskEdit->text().toLocal8Bit().constData(),
+ psklen != 64);
+ if (eapSelect->isEnabled()) {
+ const char *eap =
+ eapSelect->currentText().toLocal8Bit().constData();
+ setNetworkParam(id, "eap", eap, false);
+ if (strcmp(eap, "SIM") == 0 || strcmp(eap, "AKA") == 0)
+ setNetworkParam(id, "pcsc", "", true);
+ else
+ setNetworkParam(id, "pcsc", "NULL", false);
+ }
+ if (phase2Select->isEnabled()) {
+ QString eap = eapSelect->currentText();
+ QString inner = phase2Select->currentText();
+ char phase2[32];
+ phase2[0] = '\0';
+ if (eap.compare("PEAP") == 0) {
+ if (inner.startsWith("EAP-"))
+ snprintf(phase2, sizeof(phase2), "auth=%s",
+ inner.right(inner.size() - 4).
+ toLocal8Bit().constData());
+ } else if (eap.compare("TTLS") == 0) {
+ if (inner.startsWith("EAP-"))
+ snprintf(phase2, sizeof(phase2), "autheap=%s",
+ inner.right(inner.size() - 4).
+ toLocal8Bit().constData());
+ else
+ snprintf(phase2, sizeof(phase2), "auth=%s",
+ inner.toLocal8Bit().constData());
+ } else if (eap.compare("FAST") == 0) {
+ const char *provisioning = NULL;
+ if (inner.startsWith("EAP-")) {
+ snprintf(phase2, sizeof(phase2), "auth=%s",
+ inner.right(inner.size() - 4).
+ toLocal8Bit().constData());
+ provisioning = "fast_provisioning=2";
+ } else if (inner.compare("GTC(auth) + MSCHAPv2(prov)")
+ == 0) {
+ snprintf(phase2, sizeof(phase2),
+ "auth=GTC auth=MSCHAPV2");
+ provisioning = "fast_provisioning=1";
+ } else
+ provisioning = "fast_provisioning=3";
+ if (provisioning) {
+ char blob[32];
+ setNetworkParam(id, "phase1", provisioning,
+ true);
+ snprintf(blob, sizeof(blob),
+ "blob://fast-pac-%d", id);
+ setNetworkParam(id, "pac_file", blob, true);
+ }
+ }
+ if (phase2[0])
+ setNetworkParam(id, "phase2", phase2, true);
+ else
+ setNetworkParam(id, "phase2", "NULL", false);
+ } else
+ setNetworkParam(id, "phase2", "NULL", false);
+ if (identityEdit->isEnabled() && identityEdit->text().length() > 0)
+ setNetworkParam(id, "identity",
+ identityEdit->text().toLocal8Bit().constData(),
+ true);
+ else
+ setNetworkParam(id, "identity", "NULL", false);
+ if (passwordEdit->isEnabled() && passwordEdit->text().length() > 0 &&
+ strcmp(passwordEdit->text().toLocal8Bit().constData(),
+ WPA_GUI_KEY_DATA) != 0)
+ setNetworkParam(id, "password",
+ passwordEdit->text().toLocal8Bit().constData(),
+ true);
+ else if (passwordEdit->text().length() == 0)
+ setNetworkParam(id, "password", "NULL", false);
+ if (cacertEdit->isEnabled() && cacertEdit->text().length() > 0)
+ setNetworkParam(id, "ca_cert",
+ cacertEdit->text().toLocal8Bit().constData(),
+ true);
+ else
+ setNetworkParam(id, "ca_cert", "NULL", false);
+ writeWepKey(id, wep0Edit, 0);
+ writeWepKey(id, wep1Edit, 1);
+ writeWepKey(id, wep2Edit, 2);
+ writeWepKey(id, wep3Edit, 3);
+
+ if (wep0Radio->isEnabled() && wep0Radio->isChecked())
+ setNetworkParam(id, "wep_tx_keyidx", "0", false);
+ else if (wep1Radio->isEnabled() && wep1Radio->isChecked())
+ setNetworkParam(id, "wep_tx_keyidx", "1", false);
+ else if (wep2Radio->isEnabled() && wep2Radio->isChecked())
+ setNetworkParam(id, "wep_tx_keyidx", "2", false);
+ else if (wep3Radio->isEnabled() && wep3Radio->isChecked())
+ setNetworkParam(id, "wep_tx_keyidx", "3", false);
+
+ if (idstrEdit->isEnabled() && idstrEdit->text().length() > 0)
+ setNetworkParam(id, "id_str",
+ idstrEdit->text().toLocal8Bit().constData(),
+ true);
+ else
+ setNetworkParam(id, "id_str", "NULL", false);
+
+ if (prioritySpinBox->isEnabled()) {
+ QString prio;
+ prio = prio.setNum(prioritySpinBox->value());
+ setNetworkParam(id, "priority", prio.toLocal8Bit().constData(),
+ false);
+ }
+
+ snprintf(cmd, sizeof(cmd), "ENABLE_NETWORK %d", id);
+ reply_len = sizeof(reply);
+ wpagui->ctrlRequest(cmd, reply, &reply_len);
+ if (strncmp(reply, "OK", 2) != 0) {
+ QMessageBox::warning(this, "wpa_gui",
+ tr("Failed to enable "
+ "network in wpa_supplicant\n"
+ "configuration."));
+ /* Network was added, so continue anyway */
+ }
+ wpagui->triggerUpdate();
+ wpagui->ctrlRequest("SAVE_CONFIG", reply, &reply_len);
+
+ close();
+}
+
+
+void NetworkConfig::setWpaGui(WpaGui *_wpagui)
+{
+ wpagui = _wpagui;
+}
+
+
+int NetworkConfig::setNetworkParam(int id, const char *field,
+ const char *value, bool quote)
+{
+ char reply[10], cmd[256];
+ size_t reply_len;
+ snprintf(cmd, sizeof(cmd), "SET_NETWORK %d %s %s%s%s",
+ id, field, quote ? "\"" : "", value, quote ? "\"" : "");
+ reply_len = sizeof(reply);
+ wpagui->ctrlRequest(cmd, reply, &reply_len);
+ return strncmp(reply, "OK", 2) == 0 ? 0 : -1;
+}
+
+
+void NetworkConfig::encrChanged(const QString &)
+{
+}
+
+
+void NetworkConfig::wepEnabled(bool enabled)
+{
+ wep0Edit->setEnabled(enabled);
+ wep1Edit->setEnabled(enabled);
+ wep2Edit->setEnabled(enabled);
+ wep3Edit->setEnabled(enabled);
+ wep0Radio->setEnabled(enabled);
+ wep1Radio->setEnabled(enabled);
+ wep2Radio->setEnabled(enabled);
+ wep3Radio->setEnabled(enabled);
+}
+
+
+void NetworkConfig::writeWepKey(int network_id, QLineEdit *edit, int id)
+{
+ char buf[10];
+ bool hex;
+ const char *txt, *pos;
+ size_t len;
+
+ if (!edit->isEnabled() || edit->text().isEmpty())
+ return;
+
+ /*
+ * Assume hex key if only hex characters are present and length matches
+ * with 40, 104, or 128-bit key
+ */
+ txt = edit->text().toLocal8Bit().constData();
+ if (strcmp(txt, WPA_GUI_KEY_DATA) == 0)
+ return;
+ len = strlen(txt);
+ if (len == 0)
+ return;
+ pos = txt;
+ hex = true;
+ while (*pos) {
+ if (!((*pos >= '0' && *pos <= '9') ||
+ (*pos >= 'a' && *pos <= 'f') ||
+ (*pos >= 'A' && *pos <= 'F'))) {
+ hex = false;
+ break;
+ }
+ pos++;
+ }
+ if (hex && len != 10 && len != 26 && len != 32)
+ hex = false;
+ snprintf(buf, sizeof(buf), "wep_key%d", id);
+ setNetworkParam(network_id, buf, txt, !hex);
+}
+
+
+static int key_value_isset(const char *reply, size_t reply_len)
+{
+ return reply_len > 0 && (reply_len < 4 || memcmp(reply, "FAIL", 4) != 0);
+}
+
+
+void NetworkConfig::paramsFromConfig(int network_id)
+{
+ int i, res;
+
+ edit_network_id = network_id;
+ getEapCapa();
+
+ char reply[1024], cmd[256], *pos;
+ size_t reply_len;
+
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d ssid", network_id);
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) >= 0 &&
+ reply_len >= 2 && reply[0] == '"') {
+ reply[reply_len] = '\0';
+ pos = strchr(reply + 1, '"');
+ if (pos)
+ *pos = '\0';
+ ssidEdit->setText(reply + 1);
+ }
+
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d proto", network_id);
+ reply_len = sizeof(reply) - 1;
+ int wpa = 0;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) >= 0) {
+ reply[reply_len] = '\0';
+ if (strstr(reply, "RSN") || strstr(reply, "WPA2"))
+ wpa = 2;
+ else if (strstr(reply, "WPA"))
+ wpa = 1;
+ }
+
+ int auth = AUTH_NONE_OPEN, encr = 0;
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d key_mgmt", network_id);
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) >= 0) {
+ reply[reply_len] = '\0';
+ if (strstr(reply, "WPA-EAP"))
+ auth = wpa & 2 ? AUTH_WPA2_EAP : AUTH_WPA_EAP;
+ else if (strstr(reply, "WPA-PSK"))
+ auth = wpa & 2 ? AUTH_WPA2_PSK : AUTH_WPA_PSK;
+ else if (strstr(reply, "IEEE8021X")) {
+ auth = AUTH_IEEE8021X;
+ encr = 1;
+ }
+ }
+
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d pairwise", network_id);
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) >= 0) {
+ reply[reply_len] = '\0';
+ if (strstr(reply, "CCMP") && auth != AUTH_NONE_OPEN &&
+ auth != AUTH_NONE_WEP && auth != AUTH_NONE_WEP_SHARED)
+ encr = 1;
+ else if (strstr(reply, "TKIP"))
+ encr = 0;
+ else if (strstr(reply, "WEP"))
+ encr = 1;
+ else
+ encr = 0;
+ }
+
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d psk", network_id);
+ reply_len = sizeof(reply) - 1;
+ res = wpagui->ctrlRequest(cmd, reply, &reply_len);
+ if (res >= 0 && reply_len >= 2 && reply[0] == '"') {
+ reply[reply_len] = '\0';
+ pos = strchr(reply + 1, '"');
+ if (pos)
+ *pos = '\0';
+ pskEdit->setText(reply + 1);
+ } else if (res >= 0 && key_value_isset(reply, reply_len)) {
+ pskEdit->setText(WPA_GUI_KEY_DATA);
+ }
+
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d identity", network_id);
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) >= 0 &&
+ reply_len >= 2 && reply[0] == '"') {
+ reply[reply_len] = '\0';
+ pos = strchr(reply + 1, '"');
+ if (pos)
+ *pos = '\0';
+ identityEdit->setText(reply + 1);
+ }
+
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d password", network_id);
+ reply_len = sizeof(reply) - 1;
+ res = wpagui->ctrlRequest(cmd, reply, &reply_len);
+ if (res >= 0 && reply_len >= 2 && reply[0] == '"') {
+ reply[reply_len] = '\0';
+ pos = strchr(reply + 1, '"');
+ if (pos)
+ *pos = '\0';
+ passwordEdit->setText(reply + 1);
+ } else if (res >= 0 && key_value_isset(reply, reply_len)) {
+ passwordEdit->setText(WPA_GUI_KEY_DATA);
+ }
+
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d ca_cert", network_id);
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) >= 0 &&
+ reply_len >= 2 && reply[0] == '"') {
+ reply[reply_len] = '\0';
+ pos = strchr(reply + 1, '"');
+ if (pos)
+ *pos = '\0';
+ cacertEdit->setText(reply + 1);
+ }
+
+ enum { NO_INNER, PEAP_INNER, TTLS_INNER, FAST_INNER } eap = NO_INNER;
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d eap", network_id);
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) >= 0 &&
+ reply_len >= 1) {
+ reply[reply_len] = '\0';
+ for (i = 0; i < eapSelect->count(); i++) {
+ if (eapSelect->itemText(i).compare(reply) == 0) {
+ eapSelect->setCurrentIndex(i);
+ if (strcmp(reply, "PEAP") == 0)
+ eap = PEAP_INNER;
+ else if (strcmp(reply, "TTLS") == 0)
+ eap = TTLS_INNER;
+ else if (strcmp(reply, "FAST") == 0)
+ eap = FAST_INNER;
+ break;
+ }
+ }
+ }
+
+ if (eap != NO_INNER) {
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d phase2",
+ network_id);
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) >= 0 &&
+ reply_len >= 1) {
+ reply[reply_len] = '\0';
+ eapChanged(eapSelect->currentIndex());
+ } else
+ eap = NO_INNER;
+ }
+
+ char *val;
+ val = reply + 1;
+ while (*(val + 1))
+ val++;
+ if (*val == '"')
+ *val = '\0';
+
+ switch (eap) {
+ case PEAP_INNER:
+ if (strncmp(reply, "\"auth=", 6))
+ break;
+ val = reply + 2;
+ memcpy(val, "EAP-", 4);
+ break;
+ case TTLS_INNER:
+ if (strncmp(reply, "\"autheap=", 9) == 0) {
+ val = reply + 5;
+ memcpy(val, "EAP-", 4);
+ } else if (strncmp(reply, "\"auth=", 6) == 0)
+ val = reply + 6;
+ break;
+ case FAST_INNER:
+ if (strncmp(reply, "\"auth=", 6))
+ break;
+ if (strcmp(reply + 6, "GTC auth=MSCHAPV2") == 0) {
+ val = (char *) "GTC(auth) + MSCHAPv2(prov)";
+ break;
+ }
+ val = reply + 2;
+ memcpy(val, "EAP-", 4);
+ break;
+ case NO_INNER:
+ break;
+ }
+
+ for (i = 0; i < phase2Select->count(); i++) {
+ if (phase2Select->itemText(i).compare(val) == 0) {
+ phase2Select->setCurrentIndex(i);
+ break;
+ }
+ }
+
+ for (i = 0; i < 4; i++) {
+ QLineEdit *wepEdit;
+ switch (i) {
+ default:
+ case 0:
+ wepEdit = wep0Edit;
+ break;
+ case 1:
+ wepEdit = wep1Edit;
+ break;
+ case 2:
+ wepEdit = wep2Edit;
+ break;
+ case 3:
+ wepEdit = wep3Edit;
+ break;
+ }
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d wep_key%d",
+ network_id, i);
+ reply_len = sizeof(reply) - 1;
+ res = wpagui->ctrlRequest(cmd, reply, &reply_len);
+ if (res >= 0 && reply_len >= 2 && reply[0] == '"') {
+ reply[reply_len] = '\0';
+ pos = strchr(reply + 1, '"');
+ if (pos)
+ *pos = '\0';
+ if (auth == AUTH_NONE_OPEN || auth == AUTH_IEEE8021X) {
+ if (auth == AUTH_NONE_OPEN)
+ auth = AUTH_NONE_WEP;
+ encr = 1;
+ }
+
+ wepEdit->setText(reply + 1);
+ } else if (res >= 0 && key_value_isset(reply, reply_len)) {
+ if (auth == AUTH_NONE_OPEN || auth == AUTH_IEEE8021X) {
+ if (auth == AUTH_NONE_OPEN)
+ auth = AUTH_NONE_WEP;
+ encr = 1;
+ }
+ wepEdit->setText(WPA_GUI_KEY_DATA);
+ }
+ }
+
+ if (auth == AUTH_NONE_WEP) {
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d auth_alg",
+ network_id);
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) >= 0) {
+ reply[reply_len] = '\0';
+ if (strcmp(reply, "SHARED") == 0)
+ auth = AUTH_NONE_WEP_SHARED;
+ }
+ }
+
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d wep_tx_keyidx", network_id);
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) >= 0 && reply_len >= 1)
+ {
+ reply[reply_len] = '\0';
+ switch (atoi(reply)) {
+ case 0:
+ wep0Radio->setChecked(true);
+ break;
+ case 1:
+ wep1Radio->setChecked(true);
+ break;
+ case 2:
+ wep2Radio->setChecked(true);
+ break;
+ case 3:
+ wep3Radio->setChecked(true);
+ break;
+ }
+ }
+
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d id_str", network_id);
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) >= 0 &&
+ reply_len >= 2 && reply[0] == '"') {
+ reply[reply_len] = '\0';
+ pos = strchr(reply + 1, '"');
+ if (pos)
+ *pos = '\0';
+ idstrEdit->setText(reply + 1);
+ }
+
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d priority", network_id);
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) >= 0 && reply_len >= 1)
+ {
+ reply[reply_len] = '\0';
+ prioritySpinBox->setValue(atoi(reply));
+ }
+
+ authSelect->setCurrentIndex(auth);
+ authChanged(auth);
+ encrSelect->setCurrentIndex(encr);
+ wepEnabled(auth == AUTH_NONE_WEP || auth == AUTH_NONE_WEP_SHARED);
+
+ removeButton->setEnabled(true);
+ addButton->setText("Save");
+}
+
+
+void NetworkConfig::removeNetwork()
+{
+ char reply[10], cmd[256];
+ size_t reply_len;
+
+ if (QMessageBox::information(
+ this, "wpa_gui",
+ tr("This will permanently remove the network\n"
+ "from the configuration. Do you really want\n"
+ "to remove this network?"),
+ tr("Yes"), tr("No")) != 0)
+ return;
+
+ snprintf(cmd, sizeof(cmd), "REMOVE_NETWORK %d", edit_network_id);
+ reply_len = sizeof(reply);
+ wpagui->ctrlRequest(cmd, reply, &reply_len);
+ if (strncmp(reply, "OK", 2) != 0) {
+ QMessageBox::warning(this, "wpa_gui",
+ tr("Failed to remove network from "
+ "wpa_supplicant\n"
+ "configuration."));
+ } else {
+ wpagui->triggerUpdate();
+ wpagui->ctrlRequest("SAVE_CONFIG", reply, &reply_len);
+ }
+
+ close();
+}
+
+
+void NetworkConfig::newNetwork()
+{
+ new_network = true;
+ getEapCapa();
+}
+
+
+void NetworkConfig::getEapCapa()
+{
+ char reply[256];
+ size_t reply_len;
+
+ if (wpagui == NULL)
+ return;
+
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest("GET_CAPABILITY eap", reply, &reply_len) < 0)
+ return;
+ reply[reply_len] = '\0';
+
+ QString res(reply);
+ QStringList types = res.split(QChar(' '));
+ eapSelect->insertItems(-1, types);
+}
+
+
+void NetworkConfig::useWps()
+{
+ if (wpagui == NULL)
+ return;
+ wpagui->setBssFromScan(bssid);
+ wpagui->wpsDialog();
+ close();
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/networkconfig.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/networkconfig.h
new file mode 100755
index 0000000..fd09dec
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/networkconfig.h
@@ -0,0 +1,55 @@
+/*
+ * wpa_gui - NetworkConfig class
+ * Copyright (c) 2005-2006, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef NETWORKCONFIG_H
+#define NETWORKCONFIG_H
+
+#include <QObject>
+#include "ui_networkconfig.h"
+
+class WpaGui;
+
+class NetworkConfig : public QDialog, public Ui::NetworkConfig
+{
+ Q_OBJECT
+
+public:
+ NetworkConfig(QWidget *parent = 0, const char *name = 0,
+ bool modal = false, Qt::WindowFlags fl = 0);
+ ~NetworkConfig();
+
+ virtual void paramsFromScanResults(QTreeWidgetItem *sel);
+ virtual void setWpaGui(WpaGui *_wpagui);
+ virtual int setNetworkParam(int id, const char *field,
+ const char *value, bool quote);
+ virtual void paramsFromConfig(int network_id);
+ virtual void newNetwork();
+
+public slots:
+ virtual void authChanged(int sel);
+ virtual void addNetwork();
+ virtual void encrChanged(const QString &sel);
+ virtual void writeWepKey(int network_id, QLineEdit *edit, int id);
+ virtual void removeNetwork();
+ virtual void eapChanged(int sel);
+ virtual void useWps();
+
+protected slots:
+ virtual void languageChange();
+
+private:
+ WpaGui *wpagui;
+ int edit_network_id;
+ bool new_network;
+ QString bssid;
+
+ virtual void wepEnabled(bool enabled);
+ virtual void getEapCapa();
+};
+
+#endif /* NETWORKCONFIG_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/networkconfig.ui b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/networkconfig.ui
new file mode 100755
index 0000000..217a8ff
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/networkconfig.ui
@@ -0,0 +1,435 @@
+<ui version="4.0" >
+ <class>NetworkConfig</class>
+ <widget class="QDialog" name="NetworkConfig" >
+ <property name="geometry" >
+ <rect>
+ <x>0</x>
+ <y>0</y>
+ <width>410</width>
+ <height>534</height>
+ </rect>
+ </property>
+ <property name="windowTitle" >
+ <string>NetworkConfig</string>
+ </property>
+ <layout class="QGridLayout" >
+ <item row="1" column="3" >
+ <widget class="QPushButton" name="cancelButton" >
+ <property name="text" >
+ <string>Cancel</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="0" colspan="4" >
+ <widget class="QFrame" name="frame9" >
+ <property name="frameShape" >
+ <enum>QFrame::NoFrame</enum>
+ </property>
+ <property name="frameShadow" >
+ <enum>QFrame::Plain</enum>
+ </property>
+ <layout class="QGridLayout" >
+ <item row="0" column="0" >
+ <widget class="QLabel" name="ssidLabel" >
+ <property name="text" >
+ <string>SSID</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="1" >
+ <widget class="QLineEdit" name="ssidEdit" >
+ <property name="toolTip" >
+ <string>Network name (Service Set IDentifier)</string>
+ </property>
+ <property name="text" >
+ <string/>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="0" >
+ <widget class="QLabel" name="authLabel" >
+ <property name="text" >
+ <string>Authentication</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QComboBox" name="authSelect" >
+ <item>
+ <property name="text" >
+ <string>Plaintext (open / no authentication)</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>Static WEP (no authentication)</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>Static WEP (Shared Key authentication)</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>IEEE 802.1X</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>WPA-Personal (PSK)</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>WPA-Enterprise (EAP)</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>WPA2-Personal (PSK)</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>WPA2-Enterprise (EAP)</string>
+ </property>
+ </item>
+ </widget>
+ </item>
+ <item row="2" column="0" >
+ <widget class="QLabel" name="encrLabel" >
+ <property name="text" >
+ <string>Encryption</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="1" >
+ <widget class="QComboBox" name="encrSelect" >
+ <item>
+ <property name="text" >
+ <string>None</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>WEP</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>TKIP</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>CCMP</string>
+ </property>
+ </item>
+ </widget>
+ </item>
+ <item row="3" column="0" >
+ <widget class="QLabel" name="pskLabel" >
+ <property name="text" >
+ <string>PSK</string>
+ </property>
+ </widget>
+ </item>
+ <item row="3" column="1" >
+ <widget class="QLineEdit" name="pskEdit" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ <property name="toolTip" >
+ <string>WPA/WPA2 pre-shared key or passphrase</string>
+ </property>
+ <property name="whatsThis" >
+ <string/>
+ </property>
+ <property name="echoMode" >
+ <enum>QLineEdit::Password</enum>
+ </property>
+ </widget>
+ </item>
+ <item row="4" column="0" >
+ <widget class="QLabel" name="eapLabel" >
+ <property name="text" >
+ <string>EAP method</string>
+ </property>
+ </widget>
+ </item>
+ <item row="4" column="1" >
+ <widget class="QComboBox" name="eapSelect" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ </widget>
+ </item>
+ <item row="5" column="0" >
+ <widget class="QLabel" name="identityLabel" >
+ <property name="text" >
+ <string>Identity</string>
+ </property>
+ </widget>
+ </item>
+ <item row="5" column="1" >
+ <widget class="QLineEdit" name="identityEdit" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ <property name="toolTip" >
+ <string>Username/Identity for EAP methods</string>
+ </property>
+ </widget>
+ </item>
+ <item row="6" column="0" >
+ <widget class="QLabel" name="passwordLabel" >
+ <property name="text" >
+ <string>Password</string>
+ </property>
+ </widget>
+ </item>
+ <item row="6" column="1" >
+ <widget class="QLineEdit" name="passwordEdit" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ <property name="toolTip" >
+ <string>Password for EAP methods</string>
+ </property>
+ <property name="echoMode" >
+ <enum>QLineEdit::Password</enum>
+ </property>
+ </widget>
+ </item>
+ <item row="7" column="0" >
+ <widget class="QLabel" name="cacertLabel" >
+ <property name="text" >
+ <string>CA certificate</string>
+ </property>
+ </widget>
+ </item>
+ <item row="7" column="1" >
+ <widget class="QLineEdit" name="cacertEdit" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ </widget>
+ </item>
+ <item row="8" column="0" colspan="2" >
+ <widget class="QGroupBox" name="wepBox" >
+ <property name="enabled" >
+ <bool>true</bool>
+ </property>
+ <property name="title" >
+ <string>WEP keys</string>
+ </property>
+ <layout class="QGridLayout" >
+ <item row="0" column="0" >
+ <widget class="QRadioButton" name="wep0Radio" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ <property name="text" >
+ <string>key 0</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="0" >
+ <widget class="QRadioButton" name="wep1Radio" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ <property name="text" >
+ <string>key 1</string>
+ </property>
+ </widget>
+ </item>
+ <item row="3" column="0" >
+ <widget class="QRadioButton" name="wep3Radio" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ <property name="text" >
+ <string>key 3</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="0" >
+ <widget class="QRadioButton" name="wep2Radio" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ <property name="text" >
+ <string>key 2</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="1" >
+ <widget class="QLineEdit" name="wep0Edit" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QLineEdit" name="wep1Edit" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="1" >
+ <widget class="QLineEdit" name="wep2Edit" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ </widget>
+ </item>
+ <item row="3" column="1" >
+ <widget class="QLineEdit" name="wep3Edit" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ </item>
+ <item row="9" column="0" colspan="2" >
+ <widget class="QGroupBox" name="optionalSettingsBox" >
+ <property name="enabled" >
+ <bool>true</bool>
+ </property>
+ <property name="title" >
+ <string>Optional Settings</string>
+ </property>
+ <layout class="QGridLayout" >
+ <item row="0" column="1" >
+ <widget class="QLineEdit" name="idstrEdit" >
+ <property name="toolTip" >
+ <string>Network Identification String</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="3" >
+ <widget class="QSpinBox" name="prioritySpinBox" >
+ <property name="toolTip" >
+ <string>Network Priority</string>
+ </property>
+ <property name="maximum" >
+ <number>10000</number>
+ </property>
+ <property name="singleStep" >
+ <number>10</number>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="0" >
+ <widget class="QLabel" name="idstrLabel" >
+ <property name="text" >
+ <string>IDString</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="2" >
+ <widget class="QLabel" name="priorityLabel" >
+ <property name="text" >
+ <string>Priority</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="0" >
+ <widget class="QLabel" name="phase2Label" >
+ <property name="text" >
+ <string>Inner auth</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QComboBox" name="phase2Select" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ </item>
+ <item row="1" column="2" >
+ <widget class="QPushButton" name="addButton" >
+ <property name="text" >
+ <string>Add</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="3" >
+ <widget class="QPushButton" name="removeButton" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ <property name="text" >
+ <string>Remove</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="0" >
+ <spacer>
+ <property name="orientation" >
+ <enum>Qt::Vertical</enum>
+ </property>
+ <property name="sizeHint" >
+ <size>
+ <width>20</width>
+ <height>40</height>
+ </size>
+ </property>
+ </spacer>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QPushButton" name="useWpsButton" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ <property name="text" >
+ <string>WPS</string>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ <layoutdefault spacing="6" margin="11" />
+ <pixmapfunction></pixmapfunction>
+ <tabstops>
+ <tabstop>ssidEdit</tabstop>
+ <tabstop>authSelect</tabstop>
+ <tabstop>encrSelect</tabstop>
+ <tabstop>pskEdit</tabstop>
+ <tabstop>eapSelect</tabstop>
+ <tabstop>identityEdit</tabstop>
+ <tabstop>passwordEdit</tabstop>
+ <tabstop>cacertEdit</tabstop>
+ <tabstop>wep0Radio</tabstop>
+ <tabstop>wep0Edit</tabstop>
+ <tabstop>wep1Radio</tabstop>
+ <tabstop>wep1Edit</tabstop>
+ <tabstop>wep2Radio</tabstop>
+ <tabstop>wep2Edit</tabstop>
+ <tabstop>wep3Radio</tabstop>
+ <tabstop>wep3Edit</tabstop>
+ <tabstop>idstrEdit</tabstop>
+ <tabstop>prioritySpinBox</tabstop>
+ <tabstop>phase2Select</tabstop>
+ <tabstop>addButton</tabstop>
+ <tabstop>removeButton</tabstop>
+ <tabstop>cancelButton</tabstop>
+ </tabstops>
+ <includes>
+ <include location="global" >qtreewidget.h</include>
+ </includes>
+ <resources/>
+ <connections/>
+</ui>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/peers.cpp b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/peers.cpp
new file mode 100755
index 0000000..0a0b3ff
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/peers.cpp
@@ -0,0 +1,1885 @@
+/*
+ * wpa_gui - Peers class
+ * Copyright (c) 2009-2010, Atheros Communications
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include <cstdio>
+#include <QImageReader>
+#include <QMessageBox>
+
+#include "common/wpa_ctrl.h"
+#include "wpagui.h"
+#include "stringquery.h"
+#include "peers.h"
+
+
+enum {
+ peer_role_address = Qt::UserRole + 1,
+ peer_role_type,
+ peer_role_uuid,
+ peer_role_details,
+ peer_role_ifname,
+ peer_role_pri_dev_type,
+ peer_role_ssid,
+ peer_role_config_methods,
+ peer_role_dev_passwd_id,
+ peer_role_bss_id,
+ peer_role_selected_method,
+ peer_role_selected_pin,
+ peer_role_requested_method,
+ peer_role_network_id
+};
+
+enum selected_method {
+ SEL_METHOD_NONE,
+ SEL_METHOD_PIN_PEER_DISPLAY,
+ SEL_METHOD_PIN_LOCAL_DISPLAY
+};
+
+/*
+ * TODO:
+ * - add current AP info (e.g., from WPS) in station mode
+ */
+
+enum peer_type {
+ PEER_TYPE_ASSOCIATED_STATION,
+ PEER_TYPE_AP,
+ PEER_TYPE_AP_WPS,
+ PEER_TYPE_WPS_PIN_NEEDED,
+ PEER_TYPE_P2P,
+ PEER_TYPE_P2P_CLIENT,
+ PEER_TYPE_P2P_GROUP,
+ PEER_TYPE_P2P_PERSISTENT_GROUP_GO,
+ PEER_TYPE_P2P_PERSISTENT_GROUP_CLIENT,
+ PEER_TYPE_P2P_INVITATION,
+ PEER_TYPE_WPS_ER_AP,
+ PEER_TYPE_WPS_ER_AP_UNCONFIGURED,
+ PEER_TYPE_WPS_ER_ENROLLEE,
+ PEER_TYPE_WPS_ENROLLEE
+};
+
+
+Peers::Peers(QWidget *parent, const char *, bool, Qt::WindowFlags)
+ : QDialog(parent)
+{
+ setupUi(this);
+
+ if (QImageReader::supportedImageFormats().contains(QByteArray("svg")))
+ {
+ default_icon = new QIcon(":/icons/wpa_gui.svg");
+ ap_icon = new QIcon(":/icons/ap.svg");
+ laptop_icon = new QIcon(":/icons/laptop.svg");
+ group_icon = new QIcon(":/icons/group.svg");
+ invitation_icon = new QIcon(":/icons/invitation.svg");
+ } else {
+ default_icon = new QIcon(":/icons/wpa_gui.png");
+ ap_icon = new QIcon(":/icons/ap.png");
+ laptop_icon = new QIcon(":/icons/laptop.png");
+ group_icon = new QIcon(":/icons/group.png");
+ invitation_icon = new QIcon(":/icons/invitation.png");
+ }
+
+ peers->setModel(&model);
+ peers->setResizeMode(QListView::Adjust);
+ peers->setDragEnabled(false);
+ peers->setSelectionMode(QAbstractItemView::NoSelection);
+
+ peers->setContextMenuPolicy(Qt::CustomContextMenu);
+ connect(peers, SIGNAL(customContextMenuRequested(const QPoint &)),
+ this, SLOT(context_menu(const QPoint &)));
+
+ wpagui = NULL;
+ hide_ap = false;
+}
+
+
+void Peers::setWpaGui(WpaGui *_wpagui)
+{
+ wpagui = _wpagui;
+ update_peers();
+}
+
+
+Peers::~Peers()
+{
+ delete default_icon;
+ delete ap_icon;
+ delete laptop_icon;
+ delete group_icon;
+ delete invitation_icon;
+}
+
+
+void Peers::languageChange()
+{
+ retranslateUi(this);
+}
+
+
+QString Peers::ItemType(int type)
+{
+ QString title;
+ switch (type) {
+ case PEER_TYPE_ASSOCIATED_STATION:
+ title = tr("Associated station");
+ break;
+ case PEER_TYPE_AP:
+ title = tr("AP");
+ break;
+ case PEER_TYPE_AP_WPS:
+ title = tr("WPS AP");
+ break;
+ case PEER_TYPE_WPS_PIN_NEEDED:
+ title = tr("WPS PIN needed");
+ break;
+ case PEER_TYPE_P2P:
+ title = tr("P2P Device");
+ break;
+ case PEER_TYPE_P2P_CLIENT:
+ title = tr("P2P Device (group client)");
+ break;
+ case PEER_TYPE_P2P_GROUP:
+ title = tr("P2P Group");
+ break;
+ case PEER_TYPE_P2P_PERSISTENT_GROUP_GO:
+ title = tr("P2P Persistent Group (GO)");
+ break;
+ case PEER_TYPE_P2P_PERSISTENT_GROUP_CLIENT:
+ title = tr("P2P Persistent Group (client)");
+ break;
+ case PEER_TYPE_P2P_INVITATION:
+ title = tr("P2P Invitation");
+ break;
+ case PEER_TYPE_WPS_ER_AP:
+ title = tr("ER: WPS AP");
+ break;
+ case PEER_TYPE_WPS_ER_AP_UNCONFIGURED:
+ title = tr("ER: WPS AP (Unconfigured)");
+ break;
+ case PEER_TYPE_WPS_ER_ENROLLEE:
+ title = tr("ER: WPS Enrollee");
+ break;
+ case PEER_TYPE_WPS_ENROLLEE:
+ title = tr("WPS Enrollee");
+ break;
+ }
+ return title;
+}
+
+
+void Peers::context_menu(const QPoint &pos)
+{
+ QMenu *menu = new QMenu;
+ if (menu == NULL)
+ return;
+
+ QModelIndex idx = peers->indexAt(pos);
+ if (idx.isValid()) {
+ ctx_item = model.itemFromIndex(idx);
+ int type = ctx_item->data(peer_role_type).toInt();
+ menu->addAction(Peers::ItemType(type))->setEnabled(false);
+ menu->addSeparator();
+
+ int config_methods = -1;
+ QVariant var = ctx_item->data(peer_role_config_methods);
+ if (var.isValid())
+ config_methods = var.toInt();
+
+ enum selected_method method = SEL_METHOD_NONE;
+ var = ctx_item->data(peer_role_selected_method);
+ if (var.isValid())
+ method = (enum selected_method) var.toInt();
+
+ if ((type == PEER_TYPE_ASSOCIATED_STATION ||
+ type == PEER_TYPE_AP_WPS ||
+ type == PEER_TYPE_WPS_PIN_NEEDED ||
+ type == PEER_TYPE_WPS_ER_ENROLLEE ||
+ type == PEER_TYPE_WPS_ENROLLEE) &&
+ (config_methods == -1 || (config_methods & 0x010c))) {
+ menu->addAction(tr("Enter WPS PIN"), this,
+ SLOT(enter_pin()));
+ }
+
+ if (type == PEER_TYPE_P2P || type == PEER_TYPE_P2P_CLIENT) {
+ menu->addAction(tr("P2P Connect"), this,
+ SLOT(ctx_p2p_connect()));
+ if (method == SEL_METHOD_NONE &&
+ config_methods > -1 &&
+ config_methods & 0x0080 /* PBC */ &&
+ config_methods != 0x0080)
+ menu->addAction(tr("P2P Connect (PBC)"), this,
+ SLOT(connect_pbc()));
+ if (method == SEL_METHOD_NONE) {
+ menu->addAction(tr("P2P Request PIN"), this,
+ SLOT(ctx_p2p_req_pin()));
+ menu->addAction(tr("P2P Show PIN"), this,
+ SLOT(ctx_p2p_show_pin()));
+ }
+
+ if (config_methods > -1 && (config_methods & 0x0100)) {
+ /* Peer has Keypad */
+ menu->addAction(tr("P2P Display PIN"), this,
+ SLOT(ctx_p2p_display_pin()));
+ }
+
+ if (config_methods > -1 && (config_methods & 0x000c)) {
+ /* Peer has Label or Display */
+ menu->addAction(tr("P2P Enter PIN"), this,
+ SLOT(ctx_p2p_enter_pin()));
+ }
+ }
+
+ if (type == PEER_TYPE_P2P_GROUP) {
+ menu->addAction(tr("Show passphrase"), this,
+ SLOT(ctx_p2p_show_passphrase()));
+ menu->addAction(tr("Remove P2P Group"), this,
+ SLOT(ctx_p2p_remove_group()));
+ }
+
+ if (type == PEER_TYPE_P2P_PERSISTENT_GROUP_GO ||
+ type == PEER_TYPE_P2P_PERSISTENT_GROUP_CLIENT ||
+ type == PEER_TYPE_P2P_INVITATION) {
+ menu->addAction(tr("Start group"), this,
+ SLOT(ctx_p2p_start_persistent()));
+ }
+
+ if (type == PEER_TYPE_P2P_PERSISTENT_GROUP_GO ||
+ type == PEER_TYPE_P2P_PERSISTENT_GROUP_CLIENT) {
+ menu->addAction(tr("Invite"), this,
+ SLOT(ctx_p2p_invite()));
+ }
+
+ if (type == PEER_TYPE_P2P_INVITATION) {
+ menu->addAction(tr("Ignore"), this,
+ SLOT(ctx_p2p_delete()));
+ }
+
+ if (type == PEER_TYPE_AP_WPS) {
+ menu->addAction(tr("Connect (PBC)"), this,
+ SLOT(connect_pbc()));
+ }
+
+ if ((type == PEER_TYPE_ASSOCIATED_STATION ||
+ type == PEER_TYPE_WPS_ER_ENROLLEE ||
+ type == PEER_TYPE_WPS_ENROLLEE) &&
+ config_methods >= 0 && (config_methods & 0x0080)) {
+ menu->addAction(tr("Enroll (PBC)"), this,
+ SLOT(connect_pbc()));
+ }
+
+ if (type == PEER_TYPE_WPS_ER_AP) {
+ menu->addAction(tr("Learn Configuration"), this,
+ SLOT(learn_ap_config()));
+ }
+
+ menu->addAction(tr("Properties"), this, SLOT(properties()));
+ } else {
+ ctx_item = NULL;
+ menu->addAction(QString(tr("Refresh")), this,
+ SLOT(ctx_refresh()));
+ menu->addAction(tr("Start P2P discovery"), this,
+ SLOT(ctx_p2p_start()));
+ menu->addAction(tr("Stop P2P discovery"), this,
+ SLOT(ctx_p2p_stop()));
+ menu->addAction(tr("P2P listen only"), this,
+ SLOT(ctx_p2p_listen()));
+ menu->addAction(tr("Start P2P group"), this,
+ SLOT(ctx_p2p_start_group()));
+ if (hide_ap)
+ menu->addAction(tr("Show AP entries"), this,
+ SLOT(ctx_show_ap()));
+ else
+ menu->addAction(tr("Hide AP entries"), this,
+ SLOT(ctx_hide_ap()));
+ }
+
+ menu->exec(peers->mapToGlobal(pos));
+}
+
+
+void Peers::enter_pin()
+{
+ if (ctx_item == NULL)
+ return;
+
+ int peer_type = ctx_item->data(peer_role_type).toInt();
+ QString uuid;
+ QString addr;
+ addr = ctx_item->data(peer_role_address).toString();
+ if (peer_type == PEER_TYPE_WPS_ER_ENROLLEE)
+ uuid = ctx_item->data(peer_role_uuid).toString();
+
+ StringQuery input(tr("PIN:"));
+ input.setWindowTitle(tr("PIN for ") + ctx_item->text());
+ if (input.exec() != QDialog::Accepted)
+ return;
+
+ char cmd[100];
+ char reply[100];
+ size_t reply_len;
+
+ if (peer_type == PEER_TYPE_WPS_ER_ENROLLEE) {
+ snprintf(cmd, sizeof(cmd), "WPS_ER_PIN %s %s %s",
+ uuid.toLocal8Bit().constData(),
+ input.get_string().toLocal8Bit().constData(),
+ addr.toLocal8Bit().constData());
+ } else {
+ snprintf(cmd, sizeof(cmd), "WPS_PIN %s %s",
+ addr.toLocal8Bit().constData(),
+ input.get_string().toLocal8Bit().constData());
+ }
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText(tr("Failed to set the WPS PIN."));
+ msg.exec();
+ }
+}
+
+
+void Peers::ctx_refresh()
+{
+ update_peers();
+}
+
+
+void Peers::ctx_p2p_start()
+{
+ char reply[20];
+ size_t reply_len;
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest("P2P_FIND", reply, &reply_len) < 0 ||
+ memcmp(reply, "FAIL", 4) == 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText("Failed to start P2P discovery.");
+ msg.exec();
+ }
+}
+
+
+void Peers::ctx_p2p_stop()
+{
+ char reply[20];
+ size_t reply_len;
+ reply_len = sizeof(reply) - 1;
+ wpagui->ctrlRequest("P2P_STOP_FIND", reply, &reply_len);
+}
+
+
+void Peers::ctx_p2p_listen()
+{
+ char reply[20];
+ size_t reply_len;
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest("P2P_LISTEN 3600", reply, &reply_len) < 0 ||
+ memcmp(reply, "FAIL", 4) == 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText("Failed to start P2P listen.");
+ msg.exec();
+ }
+}
+
+
+void Peers::ctx_p2p_start_group()
+{
+ char reply[20];
+ size_t reply_len;
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest("P2P_GROUP_ADD", reply, &reply_len) < 0 ||
+ memcmp(reply, "FAIL", 4) == 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText("Failed to start P2P group.");
+ msg.exec();
+ }
+}
+
+
+void Peers::add_station(QString info)
+{
+ QStringList lines = info.split(QRegExp("\\n"));
+ QString name;
+
+ for (QStringList::Iterator it = lines.begin();
+ it != lines.end(); it++) {
+ int pos = (*it).indexOf('=') + 1;
+ if (pos < 1)
+ continue;
+
+ if ((*it).startsWith("wpsDeviceName="))
+ name = (*it).mid(pos);
+ else if ((*it).startsWith("p2p_device_name="))
+ name = (*it).mid(pos);
+ }
+
+ if (name.isEmpty())
+ name = lines[0];
+
+ QStandardItem *item = new QStandardItem(*laptop_icon, name);
+ if (item) {
+ /* Remove WPS enrollee entry if one is still pending */
+ if (model.rowCount() > 0) {
+ QModelIndexList lst = model.match(model.index(0, 0),
+ peer_role_address,
+ lines[0]);
+ for (int i = 0; i < lst.size(); i++) {
+ QStandardItem *item;
+ item = model.itemFromIndex(lst[i]);
+ if (item == NULL)
+ continue;
+ int type = item->data(peer_role_type).toInt();
+ if (type == PEER_TYPE_WPS_ENROLLEE) {
+ model.removeRow(lst[i].row());
+ break;
+ }
+ }
+ }
+
+ item->setData(lines[0], peer_role_address);
+ item->setData(PEER_TYPE_ASSOCIATED_STATION,
+ peer_role_type);
+ item->setData(info, peer_role_details);
+ item->setToolTip(ItemType(PEER_TYPE_ASSOCIATED_STATION));
+ model.appendRow(item);
+ }
+}
+
+
+void Peers::add_stations()
+{
+ char reply[2048];
+ size_t reply_len;
+ char cmd[30];
+ int res;
+
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest("STA-FIRST", reply, &reply_len) < 0)
+ return;
+
+ do {
+ reply[reply_len] = '\0';
+ QString info(reply);
+ char *txt = reply;
+ while (*txt != '\0' && *txt != '\n')
+ txt++;
+ *txt++ = '\0';
+ if (strncmp(reply, "FAIL", 4) == 0 ||
+ strncmp(reply, "UNKNOWN", 7) == 0)
+ break;
+
+ add_station(info);
+
+ reply_len = sizeof(reply) - 1;
+ res = snprintf(cmd, sizeof(cmd), "STA-NEXT %s", reply);
+ if (res < 0 || (size_t) res >= sizeof(cmd))
+ break;
+ res = wpagui->ctrlRequest(cmd, reply, &reply_len);
+ } while (res >= 0);
+}
+
+
+void Peers::add_single_station(const char *addr)
+{
+ char reply[2048];
+ size_t reply_len;
+ char cmd[30];
+
+ reply_len = sizeof(reply) - 1;
+ snprintf(cmd, sizeof(cmd), "STA %s", addr);
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0)
+ return;
+
+ reply[reply_len] = '\0';
+ QString info(reply);
+ char *txt = reply;
+ while (*txt != '\0' && *txt != '\n')
+ txt++;
+ *txt++ = '\0';
+ if (strncmp(reply, "FAIL", 4) == 0 ||
+ strncmp(reply, "UNKNOWN", 7) == 0)
+ return;
+
+ add_station(info);
+}
+
+
+void Peers::add_p2p_group_client(QStandardItem * /*parent*/, QString params)
+{
+ /*
+ * dev=02:b5:64:63:30:63 iface=02:b5:64:63:30:63 dev_capab=0x0
+ * dev_type=1-0050f204-1 dev_name='Wireless Client'
+ * config_methods=0x8c
+ */
+
+ QStringList items =
+ params.split(QRegExp(" (?=[^']*('[^']*'[^']*)*$)"));
+ QString addr = "";
+ QString name = "";
+ int config_methods = 0;
+ QString dev_type;
+
+ for (int i = 0; i < items.size(); i++) {
+ QString str = items.at(i);
+ int pos = str.indexOf('=') + 1;
+ if (str.startsWith("dev_name='"))
+ name = str.section('\'', 1, -2);
+ else if (str.startsWith("config_methods="))
+ config_methods =
+ str.section('=', 1).toInt(0, 0);
+ else if (str.startsWith("dev="))
+ addr = str.mid(pos);
+ else if (str.startsWith("dev_type=") && dev_type.isEmpty())
+ dev_type = str.mid(pos);
+ }
+
+ QStandardItem *item = find_addr(addr);
+ if (item)
+ return;
+
+ item = new QStandardItem(*default_icon, name);
+ if (item) {
+ /* TODO: indicate somehow the relationship to the group owner
+ * (parent) */
+ item->setData(addr, peer_role_address);
+ item->setData(config_methods, peer_role_config_methods);
+ item->setData(PEER_TYPE_P2P_CLIENT, peer_role_type);
+ if (!dev_type.isEmpty())
+ item->setData(dev_type, peer_role_pri_dev_type);
+ item->setData(items.join(QString("\n")), peer_role_details);
+ item->setToolTip(ItemType(PEER_TYPE_P2P_CLIENT));
+ model.appendRow(item);
+ }
+}
+
+
+void Peers::remove_bss(int id)
+{
+ if (model.rowCount() == 0)
+ return;
+
+ QModelIndexList lst = model.match(model.index(0, 0), peer_role_bss_id,
+ id);
+ if (lst.size() == 0)
+ return;
+ model.removeRow(lst[0].row());
+}
+
+
+bool Peers::add_bss(const char *cmd)
+{
+ char reply[2048];
+ size_t reply_len;
+
+ if (hide_ap)
+ return false;
+
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0)
+ return false;
+ reply[reply_len] = '\0';
+
+ QString bss(reply);
+ if (bss.isEmpty() || bss.startsWith("FAIL"))
+ return false;
+
+ QString ssid, bssid, flags, wps_name, pri_dev_type;
+ int id = -1;
+
+ QStringList lines = bss.split(QRegExp("\\n"));
+ for (QStringList::Iterator it = lines.begin();
+ it != lines.end(); it++) {
+ int pos = (*it).indexOf('=') + 1;
+ if (pos < 1)
+ continue;
+
+ if ((*it).startsWith("bssid="))
+ bssid = (*it).mid(pos);
+ else if ((*it).startsWith("id="))
+ id = (*it).mid(pos).toInt();
+ else if ((*it).startsWith("flags="))
+ flags = (*it).mid(pos);
+ else if ((*it).startsWith("ssid="))
+ ssid = (*it).mid(pos);
+ else if ((*it).startsWith("wps_device_name="))
+ wps_name = (*it).mid(pos);
+ else if ((*it).startsWith("wps_primary_device_type="))
+ pri_dev_type = (*it).mid(pos);
+ }
+
+ QString name = wps_name;
+ if (name.isEmpty())
+ name = ssid + "\n" + bssid;
+
+ QStandardItem *item = new QStandardItem(*ap_icon, name);
+ if (item) {
+ item->setData(bssid, peer_role_address);
+ if (id >= 0)
+ item->setData(id, peer_role_bss_id);
+ int type;
+ if (flags.contains("[WPS"))
+ type = PEER_TYPE_AP_WPS;
+ else
+ type = PEER_TYPE_AP;
+ item->setData(type, peer_role_type);
+
+ for (int i = 0; i < lines.size(); i++) {
+ if (lines[i].length() > 60) {
+ lines[i].remove(60, lines[i].length());
+ lines[i] += "..";
+ }
+ }
+ item->setToolTip(ItemType(type));
+ item->setData(lines.join("\n"), peer_role_details);
+ if (!pri_dev_type.isEmpty())
+ item->setData(pri_dev_type,
+ peer_role_pri_dev_type);
+ if (!ssid.isEmpty())
+ item->setData(ssid, peer_role_ssid);
+ model.appendRow(item);
+
+ lines = bss.split(QRegExp("\\n"));
+ for (QStringList::Iterator it = lines.begin();
+ it != lines.end(); it++) {
+ if ((*it).startsWith("p2p_group_client:"))
+ add_p2p_group_client(item,
+ (*it).mid(18));
+ }
+ }
+
+ return true;
+}
+
+
+void Peers::add_scan_results()
+{
+ int index;
+ char cmd[20];
+
+ index = 0;
+ while (wpagui) {
+ snprintf(cmd, sizeof(cmd), "BSS %d", index++);
+ if (index > 1000)
+ break;
+
+ if (!add_bss(cmd))
+ break;
+ }
+}
+
+
+void Peers::add_persistent(int id, const char *ssid, const char *bssid)
+{
+ char cmd[100];
+ char reply[100];
+ size_t reply_len;
+ int mode;
+
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d mode", id);
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0)
+ return;
+ reply[reply_len] = '\0';
+ mode = atoi(reply);
+
+ QString name = ssid;
+ name = '[' + name + ']';
+
+ QStandardItem *item = new QStandardItem(*group_icon, name);
+ if (!item)
+ return;
+
+ int type;
+ if (mode == 3)
+ type = PEER_TYPE_P2P_PERSISTENT_GROUP_GO;
+ else
+ type = PEER_TYPE_P2P_PERSISTENT_GROUP_CLIENT;
+ item->setData(type, peer_role_type);
+ item->setToolTip(ItemType(type));
+ item->setData(ssid, peer_role_ssid);
+ if (bssid && strcmp(bssid, "any") == 0)
+ bssid = NULL;
+ if (bssid)
+ item->setData(bssid, peer_role_address);
+ item->setData(id, peer_role_network_id);
+ item->setBackground(Qt::BDiagPattern);
+
+ model.appendRow(item);
+}
+
+
+void Peers::add_persistent_groups()
+{
+ char buf[2048], *start, *end, *id, *ssid, *bssid, *flags;
+ size_t len;
+
+ len = sizeof(buf) - 1;
+ if (wpagui->ctrlRequest("LIST_NETWORKS", buf, &len) < 0)
+ return;
+
+ buf[len] = '\0';
+ start = strchr(buf, '\n');
+ if (start == NULL)
+ return;
+ start++;
+
+ while (*start) {
+ bool last = false;
+ end = strchr(start, '\n');
+ if (end == NULL) {
+ last = true;
+ end = start;
+ while (end[0] && end[1])
+ end++;
+ }
+ *end = '\0';
+
+ id = start;
+ ssid = strchr(id, '\t');
+ if (ssid == NULL)
+ break;
+ *ssid++ = '\0';
+ bssid = strchr(ssid, '\t');
+ if (bssid == NULL)
+ break;
+ *bssid++ = '\0';
+ flags = strchr(bssid, '\t');
+ if (flags == NULL)
+ break;
+ *flags++ = '\0';
+
+ if (strstr(flags, "[DISABLED][P2P-PERSISTENT]"))
+ add_persistent(atoi(id), ssid, bssid);
+
+ if (last)
+ break;
+ start = end + 1;
+ }
+}
+
+
+void Peers::update_peers()
+{
+ model.clear();
+ if (wpagui == NULL)
+ return;
+
+ char reply[20];
+ size_t replylen = sizeof(reply) - 1;
+ wpagui->ctrlRequest("WPS_ER_START", reply, &replylen);
+
+ add_stations();
+ add_scan_results();
+ add_persistent_groups();
+}
+
+
+QStandardItem * Peers::find_addr(QString addr)
+{
+ if (model.rowCount() == 0)
+ return NULL;
+
+ QModelIndexList lst = model.match(model.index(0, 0), peer_role_address,
+ addr);
+ if (lst.size() == 0)
+ return NULL;
+ return model.itemFromIndex(lst[0]);
+}
+
+
+QStandardItem * Peers::find_addr_type(QString addr, int type)
+{
+ if (model.rowCount() == 0)
+ return NULL;
+
+ QModelIndexList lst = model.match(model.index(0, 0), peer_role_address,
+ addr);
+ for (int i = 0; i < lst.size(); i++) {
+ QStandardItem *item = model.itemFromIndex(lst[i]);
+ if (item->data(peer_role_type).toInt() == type)
+ return item;
+ }
+ return NULL;
+}
+
+
+QStandardItem * Peers::find_uuid(QString uuid)
+{
+ if (model.rowCount() == 0)
+ return NULL;
+
+ QModelIndexList lst = model.match(model.index(0, 0), peer_role_uuid,
+ uuid);
+ if (lst.size() == 0)
+ return NULL;
+ return model.itemFromIndex(lst[0]);
+}
+
+
+void Peers::event_notify(WpaMsg msg)
+{
+ QString text = msg.getMsg();
+
+ if (text.startsWith(WPS_EVENT_PIN_NEEDED)) {
+ /*
+ * WPS-PIN-NEEDED 5a02a5fa-9199-5e7c-bc46-e183d3cb32f7
+ * 02:2a:c4:18:5b:f3
+ * [Wireless Client|Company|cmodel|123|12345|1-0050F204-1]
+ */
+ QStringList items = text.split(' ');
+ QString uuid = items[1];
+ QString addr = items[2];
+ QString name = "";
+
+ QStandardItem *item = find_addr(addr);
+ if (item)
+ return;
+
+ int pos = text.indexOf('[');
+ if (pos >= 0) {
+ int pos2 = text.lastIndexOf(']');
+ if (pos2 >= pos) {
+ items = text.mid(pos + 1, pos2 - pos - 1).
+ split('|');
+ name = items[0];
+ items.append(addr);
+ }
+ }
+
+ item = new QStandardItem(*laptop_icon, name);
+ if (item) {
+ item->setData(addr, peer_role_address);
+ item->setData(PEER_TYPE_WPS_PIN_NEEDED,
+ peer_role_type);
+ item->setToolTip(ItemType(PEER_TYPE_WPS_PIN_NEEDED));
+ item->setData(items.join("\n"), peer_role_details);
+ item->setData(items[5], peer_role_pri_dev_type);
+ model.appendRow(item);
+ }
+ return;
+ }
+
+ if (text.startsWith(AP_STA_CONNECTED)) {
+ /* AP-STA-CONNECTED 02:2a:c4:18:5b:f3 */
+ QStringList items = text.split(' ');
+ QString addr = items[1];
+ QStandardItem *item = find_addr(addr);
+ if (item == NULL || item->data(peer_role_type).toInt() !=
+ PEER_TYPE_ASSOCIATED_STATION)
+ add_single_station(addr.toLocal8Bit().constData());
+ return;
+ }
+
+ if (text.startsWith(AP_STA_DISCONNECTED)) {
+ /* AP-STA-DISCONNECTED 02:2a:c4:18:5b:f3 */
+ QStringList items = text.split(' ');
+ QString addr = items[1];
+
+ if (model.rowCount() == 0)
+ return;
+
+ QModelIndexList lst = model.match(model.index(0, 0),
+ peer_role_address, addr, -1);
+ for (int i = 0; i < lst.size(); i++) {
+ QStandardItem *item = model.itemFromIndex(lst[i]);
+ if (item && item->data(peer_role_type).toInt() ==
+ PEER_TYPE_ASSOCIATED_STATION) {
+ model.removeRow(lst[i].row());
+ break;
+ }
+ }
+ return;
+ }
+
+ if (text.startsWith(P2P_EVENT_DEVICE_FOUND)) {
+ /*
+ * P2P-DEVICE-FOUND 02:b5:64:63:30:63
+ * p2p_dev_addr=02:b5:64:63:30:63 pri_dev_type=1-0050f204-1
+ * name='Wireless Client' config_methods=0x84 dev_capab=0x21
+ * group_capab=0x0
+ */
+ QStringList items =
+ text.split(QRegExp(" (?=[^']*('[^']*'[^']*)*$)"));
+ QString addr = items[1];
+ QString name = "";
+ QString pri_dev_type;
+ int config_methods = 0;
+ for (int i = 0; i < items.size(); i++) {
+ QString str = items.at(i);
+ if (str.startsWith("name='"))
+ name = str.section('\'', 1, -2);
+ else if (str.startsWith("config_methods="))
+ config_methods =
+ str.section('=', 1).toInt(0, 0);
+ else if (str.startsWith("pri_dev_type="))
+ pri_dev_type = str.section('=', 1);
+ }
+
+ QStandardItem *item = find_addr(addr);
+ if (item) {
+ int type = item->data(peer_role_type).toInt();
+ if (type == PEER_TYPE_P2P)
+ return;
+ }
+
+ item = new QStandardItem(*default_icon, name);
+ if (item) {
+ item->setData(addr, peer_role_address);
+ item->setData(config_methods,
+ peer_role_config_methods);
+ item->setData(PEER_TYPE_P2P, peer_role_type);
+ if (!pri_dev_type.isEmpty())
+ item->setData(pri_dev_type,
+ peer_role_pri_dev_type);
+ item->setData(items.join(QString("\n")),
+ peer_role_details);
+ item->setToolTip(ItemType(PEER_TYPE_P2P));
+ model.appendRow(item);
+ }
+
+ item = find_addr_type(addr,
+ PEER_TYPE_P2P_PERSISTENT_GROUP_CLIENT);
+ if (item)
+ item->setBackground(Qt::NoBrush);
+ }
+
+ if (text.startsWith(P2P_EVENT_GROUP_STARTED)) {
+ /* P2P-GROUP-STARTED wlan0-p2p-0 GO ssid="DIRECT-3F"
+ * passphrase="YOyTkxID" go_dev_addr=02:40:61:c2:f3:b7
+ * [PERSISTENT] */
+ QStringList items = text.split(' ');
+ if (items.size() < 4)
+ return;
+
+ int pos = text.indexOf(" ssid=\"");
+ if (pos < 0)
+ return;
+ QString ssid = text.mid(pos + 7);
+ pos = ssid.indexOf(" passphrase=\"");
+ if (pos < 0)
+ pos = ssid.indexOf(" psk=");
+ if (pos >= 0)
+ ssid.truncate(pos);
+ pos = ssid.lastIndexOf('"');
+ if (pos >= 0)
+ ssid.truncate(pos);
+
+ QStandardItem *item = new QStandardItem(*group_icon, ssid);
+ if (item) {
+ item->setData(PEER_TYPE_P2P_GROUP, peer_role_type);
+ item->setData(items[1], peer_role_ifname);
+ QString details;
+ if (items[2] == "GO") {
+ details = tr("P2P GO for interface ") +
+ items[1];
+ } else {
+ details = tr("P2P client for interface ") +
+ items[1];
+ }
+ if (text.contains(" [PERSISTENT]"))
+ details += "\nPersistent group";
+ item->setData(details, peer_role_details);
+ item->setToolTip(ItemType(PEER_TYPE_P2P_GROUP));
+ model.appendRow(item);
+ }
+ }
+
+ if (text.startsWith(P2P_EVENT_GROUP_REMOVED)) {
+ /* P2P-GROUP-REMOVED wlan0-p2p-0 GO */
+ QStringList items = text.split(' ');
+ if (items.size() < 2)
+ return;
+
+ if (model.rowCount() == 0)
+ return;
+
+ QModelIndexList lst = model.match(model.index(0, 0),
+ peer_role_ifname, items[1]);
+ for (int i = 0; i < lst.size(); i++)
+ model.removeRow(lst[i].row());
+ return;
+ }
+
+ if (text.startsWith(P2P_EVENT_PROV_DISC_SHOW_PIN)) {
+ /* P2P-PROV-DISC-SHOW-PIN 02:40:61:c2:f3:b7 12345670 */
+ QStringList items = text.split(' ');
+ if (items.size() < 3)
+ return;
+ QString addr = items[1];
+ QString pin = items[2];
+
+ QStandardItem *item = find_addr_type(addr, PEER_TYPE_P2P);
+ if (item == NULL)
+ return;
+ item->setData(SEL_METHOD_PIN_LOCAL_DISPLAY,
+ peer_role_selected_method);
+ item->setData(pin, peer_role_selected_pin);
+ QVariant var = item->data(peer_role_requested_method);
+ if (var.isValid() &&
+ var.toInt() == SEL_METHOD_PIN_LOCAL_DISPLAY) {
+ ctx_item = item;
+ ctx_p2p_display_pin_pd();
+ }
+ return;
+ }
+
+ if (text.startsWith(P2P_EVENT_PROV_DISC_ENTER_PIN)) {
+ /* P2P-PROV-DISC-ENTER-PIN 02:40:61:c2:f3:b7 */
+ QStringList items = text.split(' ');
+ if (items.size() < 2)
+ return;
+ QString addr = items[1];
+
+ QStandardItem *item = find_addr_type(addr, PEER_TYPE_P2P);
+ if (item == NULL)
+ return;
+ item->setData(SEL_METHOD_PIN_PEER_DISPLAY,
+ peer_role_selected_method);
+ QVariant var = item->data(peer_role_requested_method);
+ if (var.isValid() &&
+ var.toInt() == SEL_METHOD_PIN_PEER_DISPLAY) {
+ ctx_item = item;
+ ctx_p2p_connect();
+ }
+ return;
+ }
+
+ if (text.startsWith(P2P_EVENT_INVITATION_RECEIVED)) {
+ /* P2P-INVITATION-RECEIVED sa=02:f0:bc:44:87:62 persistent=4 */
+ QStringList items = text.split(' ');
+ if (items.size() < 3)
+ return;
+ if (!items[1].startsWith("sa=") ||
+ !items[2].startsWith("persistent="))
+ return;
+ QString addr = items[1].mid(3);
+ int id = items[2].mid(11).toInt();
+
+ char cmd[100];
+ char reply[100];
+ size_t reply_len;
+
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d ssid", id);
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0)
+ return;
+ reply[reply_len] = '\0';
+ QString name;
+ char *pos = strrchr(reply, '"');
+ if (pos && reply[0] == '"') {
+ *pos = '\0';
+ name = reply + 1;
+ } else
+ name = reply;
+
+ QStandardItem *item;
+ item = find_addr_type(addr, PEER_TYPE_P2P_INVITATION);
+ if (item)
+ model.removeRow(item->row());
+
+ item = new QStandardItem(*invitation_icon, name);
+ if (!item)
+ return;
+ item->setData(PEER_TYPE_P2P_INVITATION, peer_role_type);
+ item->setToolTip(ItemType(PEER_TYPE_P2P_INVITATION));
+ item->setData(addr, peer_role_address);
+ item->setData(id, peer_role_network_id);
+
+ model.appendRow(item);
+
+ enable_persistent(id);
+
+ return;
+ }
+
+ if (text.startsWith(P2P_EVENT_INVITATION_RESULT)) {
+ /* P2P-INVITATION-RESULT status=1 */
+ /* TODO */
+ return;
+ }
+
+ if (text.startsWith(WPS_EVENT_ER_AP_ADD)) {
+ /*
+ * WPS-ER-AP-ADD 87654321-9abc-def0-1234-56789abc0002
+ * 02:11:22:33:44:55 pri_dev_type=6-0050F204-1 wps_state=1
+ * |Very friendly name|Company|Long description of the model|
+ * WAP|http://w1.fi/|http://w1.fi/hostapd/
+ */
+ QStringList items = text.split(' ');
+ if (items.size() < 5)
+ return;
+ QString uuid = items[1];
+ QString addr = items[2];
+ QString pri_dev_type = items[3].mid(13);
+ int wps_state = items[4].mid(10).toInt();
+
+ int pos = text.indexOf('|');
+ if (pos < 0)
+ return;
+ items = text.mid(pos + 1).split('|');
+ if (items.size() < 1)
+ return;
+
+ QStandardItem *item = find_uuid(uuid);
+ if (item)
+ return;
+
+ item = new QStandardItem(*ap_icon, items[0]);
+ if (item) {
+ item->setData(uuid, peer_role_uuid);
+ item->setData(addr, peer_role_address);
+ int type = wps_state == 2 ? PEER_TYPE_WPS_ER_AP:
+ PEER_TYPE_WPS_ER_AP_UNCONFIGURED;
+ item->setData(type, peer_role_type);
+ item->setToolTip(ItemType(type));
+ item->setData(pri_dev_type, peer_role_pri_dev_type);
+ item->setData(items.join(QString("\n")),
+ peer_role_details);
+ model.appendRow(item);
+ }
+
+ return;
+ }
+
+ if (text.startsWith(WPS_EVENT_ER_AP_REMOVE)) {
+ /* WPS-ER-AP-REMOVE 87654321-9abc-def0-1234-56789abc0002 */
+ QStringList items = text.split(' ');
+ if (items.size() < 2)
+ return;
+ if (model.rowCount() == 0)
+ return;
+
+ QModelIndexList lst = model.match(model.index(0, 0),
+ peer_role_uuid, items[1]);
+ for (int i = 0; i < lst.size(); i++) {
+ QStandardItem *item = model.itemFromIndex(lst[i]);
+ if (item &&
+ (item->data(peer_role_type).toInt() ==
+ PEER_TYPE_WPS_ER_AP ||
+ item->data(peer_role_type).toInt() ==
+ PEER_TYPE_WPS_ER_AP_UNCONFIGURED))
+ model.removeRow(lst[i].row());
+ }
+ return;
+ }
+
+ if (text.startsWith(WPS_EVENT_ER_ENROLLEE_ADD)) {
+ /*
+ * WPS-ER-ENROLLEE-ADD 2b7093f1-d6fb-5108-adbb-bea66bb87333
+ * 02:66:a0:ee:17:27 M1=1 config_methods=0x14d dev_passwd_id=0
+ * pri_dev_type=1-0050F204-1
+ * |Wireless Client|Company|cmodel|123|12345|
+ */
+ QStringList items = text.split(' ');
+ if (items.size() < 3)
+ return;
+ QString uuid = items[1];
+ QString addr = items[2];
+ QString pri_dev_type = items[6].mid(13);
+ int config_methods = -1;
+ int dev_passwd_id = -1;
+
+ for (int i = 3; i < items.size(); i++) {
+ int pos = items[i].indexOf('=') + 1;
+ if (pos < 1)
+ continue;
+ QString val = items[i].mid(pos);
+ if (items[i].startsWith("config_methods=")) {
+ config_methods = val.toInt(0, 0);
+ } else if (items[i].startsWith("dev_passwd_id=")) {
+ dev_passwd_id = val.toInt();
+ }
+ }
+
+ int pos = text.indexOf('|');
+ if (pos < 0)
+ return;
+ items = text.mid(pos + 1).split('|');
+ if (items.size() < 1)
+ return;
+ QString name = items[0];
+ if (name.length() == 0)
+ name = addr;
+
+ remove_enrollee_uuid(uuid);
+
+ QStandardItem *item;
+ item = new QStandardItem(*laptop_icon, name);
+ if (item) {
+ item->setData(uuid, peer_role_uuid);
+ item->setData(addr, peer_role_address);
+ item->setData(PEER_TYPE_WPS_ER_ENROLLEE,
+ peer_role_type);
+ item->setToolTip(ItemType(PEER_TYPE_WPS_ER_ENROLLEE));
+ item->setData(items.join(QString("\n")),
+ peer_role_details);
+ item->setData(pri_dev_type, peer_role_pri_dev_type);
+ if (config_methods >= 0)
+ item->setData(config_methods,
+ peer_role_config_methods);
+ if (dev_passwd_id >= 0)
+ item->setData(dev_passwd_id,
+ peer_role_dev_passwd_id);
+ model.appendRow(item);
+ }
+
+ return;
+ }
+
+ if (text.startsWith(WPS_EVENT_ER_ENROLLEE_REMOVE)) {
+ /*
+ * WPS-ER-ENROLLEE-REMOVE 2b7093f1-d6fb-5108-adbb-bea66bb87333
+ * 02:66:a0:ee:17:27
+ */
+ QStringList items = text.split(' ');
+ if (items.size() < 2)
+ return;
+ remove_enrollee_uuid(items[1]);
+ return;
+ }
+
+ if (text.startsWith(WPS_EVENT_ENROLLEE_SEEN)) {
+ /* TODO: need to time out this somehow or remove on successful
+ * WPS run, etc. */
+ /*
+ * WPS-ENROLLEE-SEEN 02:00:00:00:01:00
+ * 572cf82f-c957-5653-9b16-b5cfb298abf1 1-0050F204-1 0x80 4 1
+ * [Wireless Client]
+ * (MAC addr, UUID-E, pri dev type, config methods,
+ * dev passwd id, request type, [dev name])
+ */
+ QStringList items = text.split(' ');
+ if (items.size() < 7)
+ return;
+ QString addr = items[1];
+ QString uuid = items[2];
+ QString pri_dev_type = items[3];
+ int config_methods = items[4].toInt(0, 0);
+ int dev_passwd_id = items[5].toInt();
+ QString name;
+
+ QStandardItem *item = find_addr(addr);
+ if (item) {
+ int type = item->data(peer_role_type).toInt();
+ if (type == PEER_TYPE_ASSOCIATED_STATION)
+ return; /* already associated */
+ }
+
+ int pos = text.indexOf('[');
+ if (pos >= 0) {
+ int pos2 = text.lastIndexOf(']');
+ if (pos2 >= pos) {
+ QStringList items2 =
+ text.mid(pos + 1, pos2 - pos - 1).
+ split('|');
+ name = items2[0];
+ }
+ }
+ if (name.isEmpty())
+ name = addr;
+
+ item = find_uuid(uuid);
+ if (item) {
+ QVariant var = item->data(peer_role_config_methods);
+ QVariant var2 = item->data(peer_role_dev_passwd_id);
+ if ((var.isValid() && config_methods != var.toInt()) ||
+ (var2.isValid() && dev_passwd_id != var2.toInt()))
+ remove_enrollee_uuid(uuid);
+ else
+ return;
+ }
+
+ item = new QStandardItem(*laptop_icon, name);
+ if (item) {
+ item->setData(uuid, peer_role_uuid);
+ item->setData(addr, peer_role_address);
+ item->setData(PEER_TYPE_WPS_ENROLLEE,
+ peer_role_type);
+ item->setToolTip(ItemType(PEER_TYPE_WPS_ENROLLEE));
+ item->setData(items.join(QString("\n")),
+ peer_role_details);
+ item->setData(pri_dev_type, peer_role_pri_dev_type);
+ item->setData(config_methods,
+ peer_role_config_methods);
+ item->setData(dev_passwd_id, peer_role_dev_passwd_id);
+ model.appendRow(item);
+ }
+
+ return;
+ }
+
+ if (text.startsWith(WPA_EVENT_BSS_ADDED)) {
+ /* CTRL-EVENT-BSS-ADDED 34 00:11:22:33:44:55 */
+ QStringList items = text.split(' ');
+ if (items.size() < 2)
+ return;
+ char cmd[20];
+ snprintf(cmd, sizeof(cmd), "BSS ID-%d", items[1].toInt());
+ add_bss(cmd);
+ return;
+ }
+
+ if (text.startsWith(WPA_EVENT_BSS_REMOVED)) {
+ /* CTRL-EVENT-BSS-REMOVED 34 00:11:22:33:44:55 */
+ QStringList items = text.split(' ');
+ if (items.size() < 2)
+ return;
+ remove_bss(items[1].toInt());
+ return;
+ }
+}
+
+
+void Peers::ctx_p2p_connect()
+{
+ if (ctx_item == NULL)
+ return;
+ QString addr = ctx_item->data(peer_role_address).toString();
+ QString arg;
+ int config_methods =
+ ctx_item->data(peer_role_config_methods).toInt();
+ enum selected_method method = SEL_METHOD_NONE;
+ QVariant var = ctx_item->data(peer_role_selected_method);
+ if (var.isValid())
+ method = (enum selected_method) var.toInt();
+ if (method == SEL_METHOD_PIN_LOCAL_DISPLAY) {
+ arg = ctx_item->data(peer_role_selected_pin).toString();
+ char cmd[100];
+ char reply[100];
+ size_t reply_len;
+ snprintf(cmd, sizeof(cmd), "P2P_CONNECT %s %s display",
+ addr.toLocal8Bit().constData(),
+ arg.toLocal8Bit().constData());
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText("Failed to initiate P2P connect.");
+ msg.exec();
+ return;
+ }
+ QMessageBox::information(this,
+ tr("PIN for ") + ctx_item->text(),
+ tr("Enter the following PIN on the\n"
+ "peer device: ") + arg);
+ } else if (method == SEL_METHOD_PIN_PEER_DISPLAY) {
+ StringQuery input(tr("PIN from peer display:"));
+ input.setWindowTitle(tr("PIN for ") + ctx_item->text());
+ if (input.exec() != QDialog::Accepted)
+ return;
+ arg = input.get_string();
+ } else if (config_methods == 0x0080 /* PBC */) {
+ arg = "pbc";
+ } else {
+ StringQuery input(tr("PIN:"));
+ input.setWindowTitle(tr("PIN for ") + ctx_item->text());
+ if (input.exec() != QDialog::Accepted)
+ return;
+ arg = input.get_string();
+ }
+
+ char cmd[100];
+ char reply[100];
+ size_t reply_len;
+ snprintf(cmd, sizeof(cmd), "P2P_CONNECT %s %s",
+ addr.toLocal8Bit().constData(),
+ arg.toLocal8Bit().constData());
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText("Failed to initiate P2P connect.");
+ msg.exec();
+ }
+}
+
+
+void Peers::ctx_p2p_req_pin()
+{
+ if (ctx_item == NULL)
+ return;
+ QString addr = ctx_item->data(peer_role_address).toString();
+ ctx_item->setData(SEL_METHOD_PIN_PEER_DISPLAY,
+ peer_role_requested_method);
+
+ char cmd[100];
+ char reply[100];
+ size_t reply_len;
+ snprintf(cmd, sizeof(cmd), "P2P_PROV_DISC %s display",
+ addr.toLocal8Bit().constData());
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText(tr("Failed to request PIN from peer."));
+ msg.exec();
+ }
+}
+
+
+void Peers::ctx_p2p_show_pin()
+{
+ if (ctx_item == NULL)
+ return;
+ QString addr = ctx_item->data(peer_role_address).toString();
+ ctx_item->setData(SEL_METHOD_PIN_LOCAL_DISPLAY,
+ peer_role_requested_method);
+
+ char cmd[100];
+ char reply[100];
+ size_t reply_len;
+ snprintf(cmd, sizeof(cmd), "P2P_PROV_DISC %s keypad",
+ addr.toLocal8Bit().constData());
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText(tr("Failed to request peer to enter PIN."));
+ msg.exec();
+ }
+}
+
+
+void Peers::ctx_p2p_display_pin()
+{
+ if (ctx_item == NULL)
+ return;
+ QString addr = ctx_item->data(peer_role_address).toString();
+
+ char cmd[100];
+ char reply[100];
+ size_t reply_len;
+ snprintf(cmd, sizeof(cmd), "P2P_CONNECT %s pin",
+ addr.toLocal8Bit().constData());
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText("Failed to initiate P2P connect.");
+ msg.exec();
+ return;
+ }
+ reply[reply_len] = '\0';
+ QMessageBox::information(this,
+ tr("PIN for ") + ctx_item->text(),
+ tr("Enter the following PIN on the\n"
+ "peer device: ") + reply);
+}
+
+
+void Peers::ctx_p2p_display_pin_pd()
+{
+ if (ctx_item == NULL)
+ return;
+ QString addr = ctx_item->data(peer_role_address).toString();
+ QString arg = ctx_item->data(peer_role_selected_pin).toString();
+
+ char cmd[100];
+ char reply[100];
+ size_t reply_len;
+ snprintf(cmd, sizeof(cmd), "P2P_CONNECT %s %s display",
+ addr.toLocal8Bit().constData(),
+ arg.toLocal8Bit().constData());
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText("Failed to initiate P2P connect.");
+ msg.exec();
+ return;
+ }
+ reply[reply_len] = '\0';
+ QMessageBox::information(this,
+ tr("PIN for ") + ctx_item->text(),
+ tr("Enter the following PIN on the\n"
+ "peer device: ") + arg);
+}
+
+
+void Peers::ctx_p2p_enter_pin()
+{
+ if (ctx_item == NULL)
+ return;
+ QString addr = ctx_item->data(peer_role_address).toString();
+ QString arg;
+
+ StringQuery input(tr("PIN from peer:"));
+ input.setWindowTitle(tr("PIN for ") + ctx_item->text());
+ if (input.exec() != QDialog::Accepted)
+ return;
+ arg = input.get_string();
+
+ char cmd[100];
+ char reply[100];
+ size_t reply_len;
+ snprintf(cmd, sizeof(cmd), "P2P_CONNECT %s %s keypad",
+ addr.toLocal8Bit().constData(),
+ arg.toLocal8Bit().constData());
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText("Failed to initiate P2P connect.");
+ msg.exec();
+ }
+}
+
+
+void Peers::ctx_p2p_remove_group()
+{
+ if (ctx_item == NULL)
+ return;
+ char cmd[100];
+ char reply[100];
+ size_t reply_len;
+ snprintf(cmd, sizeof(cmd), "P2P_GROUP_REMOVE %s",
+ ctx_item->data(peer_role_ifname).toString().toLocal8Bit().
+ constData());
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText("Failed to remove P2P Group.");
+ msg.exec();
+ }
+}
+
+
+void Peers::closeEvent(QCloseEvent *)
+{
+ if (wpagui) {
+ char reply[20];
+ size_t replylen = sizeof(reply) - 1;
+ wpagui->ctrlRequest("WPS_ER_STOP", reply, &replylen);
+ }
+}
+
+
+void Peers::done(int r)
+{
+ QDialog::done(r);
+ close();
+}
+
+
+void Peers::remove_enrollee_uuid(QString uuid)
+{
+ if (model.rowCount() == 0)
+ return;
+
+ QModelIndexList lst = model.match(model.index(0, 0),
+ peer_role_uuid, uuid);
+ for (int i = 0; i < lst.size(); i++) {
+ QStandardItem *item = model.itemFromIndex(lst[i]);
+ if (item == NULL)
+ continue;
+ int type = item->data(peer_role_type).toInt();
+ if (type == PEER_TYPE_WPS_ER_ENROLLEE ||
+ type == PEER_TYPE_WPS_ENROLLEE)
+ model.removeRow(lst[i].row());
+ }
+}
+
+
+void Peers::properties()
+{
+ if (ctx_item == NULL)
+ return;
+
+ QMessageBox msg(this);
+ msg.setStandardButtons(QMessageBox::Ok);
+ msg.setDefaultButton(QMessageBox::Ok);
+ msg.setEscapeButton(QMessageBox::Ok);
+ msg.setWindowTitle(tr("Peer Properties"));
+
+ int type = ctx_item->data(peer_role_type).toInt();
+ QString title = Peers::ItemType(type);
+
+ msg.setText(title + QString("\n") + tr("Name: ") + ctx_item->text());
+
+ QVariant var;
+ QString info;
+
+ var = ctx_item->data(peer_role_address);
+ if (var.isValid())
+ info += tr("Address: ") + var.toString() + QString("\n");
+
+ var = ctx_item->data(peer_role_uuid);
+ if (var.isValid())
+ info += tr("UUID: ") + var.toString() + QString("\n");
+
+ var = ctx_item->data(peer_role_pri_dev_type);
+ if (var.isValid())
+ info += tr("Primary Device Type: ") + var.toString() +
+ QString("\n");
+
+ var = ctx_item->data(peer_role_ssid);
+ if (var.isValid())
+ info += tr("SSID: ") + var.toString() + QString("\n");
+
+ var = ctx_item->data(peer_role_config_methods);
+ if (var.isValid()) {
+ int methods = var.toInt();
+ info += tr("Configuration Methods: ");
+ if (methods & 0x0001)
+ info += tr("[USBA]");
+ if (methods & 0x0002)
+ info += tr("[Ethernet]");
+ if (methods & 0x0004)
+ info += tr("[Label]");
+ if (methods & 0x0008)
+ info += tr("[Display]");
+ if (methods & 0x0010)
+ info += tr("[Ext. NFC Token]");
+ if (methods & 0x0020)
+ info += tr("[Int. NFC Token]");
+ if (methods & 0x0040)
+ info += tr("[NFC Interface]");
+ if (methods & 0x0080)
+ info += tr("[Push Button]");
+ if (methods & 0x0100)
+ info += tr("[Keypad]");
+ info += "\n";
+ }
+
+ var = ctx_item->data(peer_role_selected_method);
+ if (var.isValid()) {
+ enum selected_method method =
+ (enum selected_method) var.toInt();
+ switch (method) {
+ case SEL_METHOD_NONE:
+ break;
+ case SEL_METHOD_PIN_PEER_DISPLAY:
+ info += tr("Selected Method: PIN on peer display\n");
+ break;
+ case SEL_METHOD_PIN_LOCAL_DISPLAY:
+ info += tr("Selected Method: PIN on local display\n");
+ break;
+ }
+ }
+
+ var = ctx_item->data(peer_role_selected_pin);
+ if (var.isValid()) {
+ info += tr("PIN to enter on peer: ") + var.toString() + "\n";
+ }
+
+ var = ctx_item->data(peer_role_dev_passwd_id);
+ if (var.isValid()) {
+ info += tr("Device Password ID: ") + var.toString();
+ switch (var.toInt()) {
+ case 0:
+ info += tr(" (Default PIN)");
+ break;
+ case 1:
+ info += tr(" (User-specified PIN)");
+ break;
+ case 2:
+ info += tr(" (Machine-specified PIN)");
+ break;
+ case 3:
+ info += tr(" (Rekey)");
+ break;
+ case 4:
+ info += tr(" (Push Button)");
+ break;
+ case 5:
+ info += tr(" (Registrar-specified)");
+ break;
+ }
+ info += "\n";
+ }
+
+ msg.setInformativeText(info);
+
+ var = ctx_item->data(peer_role_details);
+ if (var.isValid())
+ msg.setDetailedText(var.toString());
+
+ msg.exec();
+}
+
+
+void Peers::connect_pbc()
+{
+ if (ctx_item == NULL)
+ return;
+
+ char cmd[100];
+ char reply[100];
+ size_t reply_len;
+
+ int peer_type = ctx_item->data(peer_role_type).toInt();
+ if (peer_type == PEER_TYPE_WPS_ER_ENROLLEE) {
+ snprintf(cmd, sizeof(cmd), "WPS_ER_PBC %s",
+ ctx_item->data(peer_role_uuid).toString().toLocal8Bit().
+ constData());
+ } else if (peer_type == PEER_TYPE_P2P ||
+ peer_type == PEER_TYPE_P2P_CLIENT) {
+ snprintf(cmd, sizeof(cmd), "P2P_CONNECT %s pbc",
+ ctx_item->data(peer_role_address).toString().
+ toLocal8Bit().constData());
+ } else {
+ snprintf(cmd, sizeof(cmd), "WPS_PBC");
+ }
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText(tr("Failed to start WPS PBC."));
+ msg.exec();
+ }
+}
+
+
+void Peers::learn_ap_config()
+{
+ if (ctx_item == NULL)
+ return;
+
+ QString uuid = ctx_item->data(peer_role_uuid).toString();
+
+ StringQuery input(tr("AP PIN:"));
+ input.setWindowTitle(tr("AP PIN for ") + ctx_item->text());
+ if (input.exec() != QDialog::Accepted)
+ return;
+
+ char cmd[100];
+ char reply[100];
+ size_t reply_len;
+
+ snprintf(cmd, sizeof(cmd), "WPS_ER_LEARN %s %s",
+ uuid.toLocal8Bit().constData(),
+ input.get_string().toLocal8Bit().constData());
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText(tr("Failed to start learning AP configuration."));
+ msg.exec();
+ }
+}
+
+
+void Peers::ctx_hide_ap()
+{
+ hide_ap = true;
+
+ if (model.rowCount() == 0)
+ return;
+
+ do {
+ QModelIndexList lst;
+ lst = model.match(model.index(0, 0),
+ peer_role_type, PEER_TYPE_AP);
+ if (lst.size() == 0) {
+ lst = model.match(model.index(0, 0),
+ peer_role_type, PEER_TYPE_AP_WPS);
+ if (lst.size() == 0)
+ break;
+ }
+
+ model.removeRow(lst[0].row());
+ } while (1);
+}
+
+
+void Peers::ctx_show_ap()
+{
+ hide_ap = false;
+ add_scan_results();
+}
+
+
+void Peers::ctx_p2p_show_passphrase()
+{
+ char reply[64];
+ size_t reply_len;
+
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest("P2P_GET_PASSPHRASE", reply, &reply_len) < 0 ||
+ memcmp(reply, "FAIL", 4) == 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText("Failed to get P2P group passphrase.");
+ msg.exec();
+ } else {
+ reply[reply_len] = '\0';
+ QMessageBox::information(this, tr("Passphrase"),
+ tr("P2P group passphrase:\n") +
+ reply);
+ }
+}
+
+
+void Peers::ctx_p2p_start_persistent()
+{
+ if (ctx_item == NULL)
+ return;
+
+ char cmd[100];
+ char reply[100];
+ size_t reply_len;
+
+ snprintf(cmd, sizeof(cmd), "P2P_GROUP_ADD persistent=%d",
+ ctx_item->data(peer_role_network_id).toInt());
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0 ||
+ memcmp(reply, "FAIL", 4) == 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText(tr("Failed to start persistent P2P Group."));
+ msg.exec();
+ } else if (ctx_item->data(peer_role_type).toInt() ==
+ PEER_TYPE_P2P_INVITATION)
+ model.removeRow(ctx_item->row());
+}
+
+
+void Peers::ctx_p2p_invite()
+{
+ if (ctx_item == NULL)
+ return;
+
+ char cmd[100];
+ char reply[100];
+ size_t reply_len;
+
+ snprintf(cmd, sizeof(cmd), "P2P_INVITE persistent=%d",
+ ctx_item->data(peer_role_network_id).toInt());
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0 ||
+ memcmp(reply, "FAIL", 4) == 0) {
+ QMessageBox msg;
+ msg.setIcon(QMessageBox::Warning);
+ msg.setText(tr("Failed to invite peer to start persistent "
+ "P2P Group."));
+ msg.exec();
+ }
+}
+
+
+void Peers::ctx_p2p_delete()
+{
+ if (ctx_item == NULL)
+ return;
+ model.removeRow(ctx_item->row());
+}
+
+
+void Peers::enable_persistent(int id)
+{
+ if (model.rowCount() == 0)
+ return;
+
+ QModelIndexList lst = model.match(model.index(0, 0),
+ peer_role_network_id, id);
+ for (int i = 0; i < lst.size(); i++) {
+ QStandardItem *item = model.itemFromIndex(lst[i]);
+ int type = item->data(peer_role_type).toInt();
+ if (type == PEER_TYPE_P2P_PERSISTENT_GROUP_GO ||
+ type == PEER_TYPE_P2P_PERSISTENT_GROUP_CLIENT)
+ item->setBackground(Qt::NoBrush);
+ }
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/peers.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/peers.h
new file mode 100755
index 0000000..bb73737
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/peers.h
@@ -0,0 +1,90 @@
+/*
+ * wpa_gui - Peers class
+ * Copyright (c) 2009-2010, Atheros Communications
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef PEERS_H
+#define PEERS_H
+
+#include <QObject>
+#include <QStandardItemModel>
+#include "wpamsg.h"
+#include "ui_peers.h"
+
+class WpaGui;
+
+class Peers : public QDialog, public Ui::Peers
+{
+ Q_OBJECT
+
+public:
+ Peers(QWidget *parent = 0, const char *name = 0,
+ bool modal = false, Qt::WindowFlags fl = 0);
+ ~Peers();
+ void setWpaGui(WpaGui *_wpagui);
+ void event_notify(WpaMsg msg);
+
+public slots:
+ virtual void context_menu(const QPoint &pos);
+ virtual void enter_pin();
+ virtual void connect_pbc();
+ virtual void learn_ap_config();
+ virtual void ctx_refresh();
+ virtual void ctx_p2p_start();
+ virtual void ctx_p2p_stop();
+ virtual void ctx_p2p_listen();
+ virtual void ctx_p2p_start_group();
+ virtual void ctx_p2p_remove_group();
+ virtual void ctx_p2p_connect();
+ virtual void ctx_p2p_req_pin();
+ virtual void ctx_p2p_show_pin();
+ virtual void ctx_p2p_display_pin();
+ virtual void ctx_p2p_display_pin_pd();
+ virtual void ctx_p2p_enter_pin();
+ virtual void properties();
+ virtual void ctx_hide_ap();
+ virtual void ctx_show_ap();
+ virtual void ctx_p2p_show_passphrase();
+ virtual void ctx_p2p_start_persistent();
+ virtual void ctx_p2p_invite();
+ virtual void ctx_p2p_delete();
+
+protected slots:
+ virtual void languageChange();
+ virtual void closeEvent(QCloseEvent *event);
+
+private:
+ void add_station(QString info);
+ void add_stations();
+ void add_single_station(const char *addr);
+ bool add_bss(const char *cmd);
+ void remove_bss(int id);
+ void add_scan_results();
+ void add_persistent(int id, const char *ssid, const char *bssid);
+ void add_persistent_groups();
+ void update_peers();
+ QStandardItem * find_addr(QString addr);
+ QStandardItem * find_addr_type(QString addr, int type);
+ void add_p2p_group_client(QStandardItem *parent, QString params);
+ QStandardItem * find_uuid(QString uuid);
+ void done(int r);
+ void remove_enrollee_uuid(QString uuid);
+ QString ItemType(int type);
+ void enable_persistent(int id);
+
+ WpaGui *wpagui;
+ QStandardItemModel model;
+ QIcon *default_icon;
+ QIcon *ap_icon;
+ QIcon *laptop_icon;
+ QIcon *group_icon;
+ QIcon *invitation_icon;
+ QStandardItem *ctx_item;
+
+ bool hide_ap;
+};
+
+#endif /* PEERS_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/peers.ui b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/peers.ui
new file mode 100755
index 0000000..9508c25
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/peers.ui
@@ -0,0 +1,40 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<ui version="4.0">
+ <class>Peers</class>
+ <widget class="QDialog" name="Peers">
+ <property name="geometry">
+ <rect>
+ <x>0</x>
+ <y>0</y>
+ <width>400</width>
+ <height>300</height>
+ </rect>
+ </property>
+ <property name="windowTitle">
+ <string>Peers</string>
+ </property>
+ <layout class="QGridLayout">
+ <item row="0" column="0">
+ <widget class="QListView" name="peers">
+ <property name="sizePolicy">
+ <sizepolicy hsizetype="Expanding" vsizetype="Expanding">
+ <horstretch>0</horstretch>
+ <verstretch>0</verstretch>
+ </sizepolicy>
+ </property>
+ <property name="mouseTracking">
+ <bool>true</bool>
+ </property>
+ <property name="editTriggers">
+ <set>QAbstractItemView::NoEditTriggers</set>
+ </property>
+ <property name="viewMode">
+ <enum>QListView::IconMode</enum>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ <resources/>
+ <connections/>
+</ui>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/scanresults.cpp b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/scanresults.cpp
new file mode 100755
index 0000000..a2e3072
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/scanresults.cpp
@@ -0,0 +1,141 @@
+/*
+ * wpa_gui - ScanResults class
+ * Copyright (c) 2005-2006, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include <cstdio>
+
+#include "scanresults.h"
+#include "signalbar.h"
+#include "wpagui.h"
+#include "networkconfig.h"
+#include "scanresultsitem.h"
+
+
+ScanResults::ScanResults(QWidget *parent, const char *, bool, Qt::WindowFlags)
+ : QDialog(parent)
+{
+ setupUi(this);
+
+ connect(closeButton, SIGNAL(clicked()), this, SLOT(close()));
+ connect(scanButton, SIGNAL(clicked()), this, SLOT(scanRequest()));
+ connect(scanResultsWidget,
+ SIGNAL(itemDoubleClicked(QTreeWidgetItem *, int)), this,
+ SLOT(bssSelected(QTreeWidgetItem *)));
+
+ wpagui = NULL;
+ scanResultsWidget->setItemsExpandable(false);
+ scanResultsWidget->setRootIsDecorated(false);
+ scanResultsWidget->setItemDelegate(new SignalBar(scanResultsWidget));
+}
+
+
+ScanResults::~ScanResults()
+{
+}
+
+
+void ScanResults::languageChange()
+{
+ retranslateUi(this);
+}
+
+
+void ScanResults::setWpaGui(WpaGui *_wpagui)
+{
+ wpagui = _wpagui;
+ updateResults();
+}
+
+
+void ScanResults::updateResults()
+{
+ char reply[2048];
+ size_t reply_len;
+ int index;
+ char cmd[20];
+
+ scanResultsWidget->clear();
+
+ index = 0;
+ while (wpagui) {
+ snprintf(cmd, sizeof(cmd), "BSS %d", index++);
+ if (index > 1000)
+ break;
+
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) < 0)
+ break;
+ reply[reply_len] = '\0';
+
+ QString bss(reply);
+ if (bss.isEmpty() || bss.startsWith("FAIL"))
+ break;
+
+ QString ssid, bssid, freq, signal, flags;
+
+ QStringList lines = bss.split(QRegExp("\\n"));
+ for (QStringList::Iterator it = lines.begin();
+ it != lines.end(); it++) {
+ int pos = (*it).indexOf('=') + 1;
+ if (pos < 1)
+ continue;
+
+ if ((*it).startsWith("bssid="))
+ bssid = (*it).mid(pos);
+ else if ((*it).startsWith("freq="))
+ freq = (*it).mid(pos);
+ else if ((*it).startsWith("level="))
+ signal = (*it).mid(pos);
+ else if ((*it).startsWith("flags="))
+ flags = (*it).mid(pos);
+ else if ((*it).startsWith("ssid="))
+ ssid = (*it).mid(pos);
+ }
+
+ ScanResultsItem *item = new ScanResultsItem(scanResultsWidget);
+ if (item) {
+ item->setText(0, ssid);
+ item->setText(1, bssid);
+ item->setText(2, freq);
+ item->setText(3, signal);
+ item->setText(4, flags);
+ }
+
+ if (bssid.isEmpty())
+ break;
+ }
+}
+
+
+void ScanResults::scanRequest()
+{
+ char reply[10];
+ size_t reply_len = sizeof(reply);
+
+ if (wpagui == NULL)
+ return;
+
+ wpagui->ctrlRequest("SCAN", reply, &reply_len);
+}
+
+
+void ScanResults::getResults()
+{
+ updateResults();
+}
+
+
+void ScanResults::bssSelected(QTreeWidgetItem *sel)
+{
+ NetworkConfig *nc = new NetworkConfig();
+ if (nc == NULL)
+ return;
+ nc->setWpaGui(wpagui);
+ nc->paramsFromScanResults(sel);
+ nc->show();
+ nc->exec();
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/scanresults.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/scanresults.h
new file mode 100755
index 0000000..2cddd13
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/scanresults.h
@@ -0,0 +1,40 @@
+/*
+ * wpa_gui - ScanResults class
+ * Copyright (c) 2005-2006, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef SCANRESULTS_H
+#define SCANRESULTS_H
+
+#include <QObject>
+#include "ui_scanresults.h"
+
+class WpaGui;
+
+class ScanResults : public QDialog, public Ui::ScanResults
+{
+ Q_OBJECT
+
+public:
+ ScanResults(QWidget *parent = 0, const char *name = 0,
+ bool modal = false, Qt::WindowFlags fl = 0);
+ ~ScanResults();
+
+public slots:
+ virtual void setWpaGui(WpaGui *_wpagui);
+ virtual void updateResults();
+ virtual void scanRequest();
+ virtual void getResults();
+ virtual void bssSelected(QTreeWidgetItem *sel);
+
+protected slots:
+ virtual void languageChange();
+
+private:
+ WpaGui *wpagui;
+};
+
+#endif /* SCANRESULTS_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/scanresults.ui b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/scanresults.ui
new file mode 100755
index 0000000..81e405e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/scanresults.ui
@@ -0,0 +1,94 @@
+<ui version="4.0" >
+ <class>ScanResults</class>
+ <widget class="QDialog" name="ScanResults" >
+ <property name="geometry" >
+ <rect>
+ <x>0</x>
+ <y>0</y>
+ <width>452</width>
+ <height>244</height>
+ </rect>
+ </property>
+ <property name="windowTitle" >
+ <string>Scan results</string>
+ </property>
+ <layout class="QVBoxLayout" >
+ <item>
+ <widget class="QTreeWidget" name="scanResultsWidget" >
+ <property name="editTriggers" >
+ <set>QAbstractItemView::NoEditTriggers</set>
+ </property>
+ <property name="uniformRowHeights" >
+ <bool>true</bool>
+ </property>
+ <property name="sortingEnabled" >
+ <bool>true</bool>
+ </property>
+ <property name="columnCount" >
+ <number>5</number>
+ </property>
+ <column>
+ <property name="text" >
+ <string>SSID</string>
+ </property>
+ </column>
+ <column>
+ <property name="text" >
+ <string>BSSID</string>
+ </property>
+ </column>
+ <column>
+ <property name="text" >
+ <string>frequency</string>
+ </property>
+ </column>
+ <column>
+ <property name="text" >
+ <string>signal</string>
+ </property>
+ </column>
+ <column>
+ <property name="text" >
+ <string>flags</string>
+ </property>
+ </column>
+ </widget>
+ </item>
+ <item>
+ <layout class="QHBoxLayout" >
+ <item>
+ <spacer>
+ <property name="orientation" >
+ <enum>Qt::Horizontal</enum>
+ </property>
+ <property name="sizeHint" >
+ <size>
+ <width>40</width>
+ <height>20</height>
+ </size>
+ </property>
+ </spacer>
+ </item>
+ <item>
+ <widget class="QPushButton" name="scanButton" >
+ <property name="text" >
+ <string>Scan</string>
+ </property>
+ </widget>
+ </item>
+ <item>
+ <widget class="QPushButton" name="closeButton" >
+ <property name="text" >
+ <string>Close</string>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </item>
+ </layout>
+ </widget>
+ <layoutdefault spacing="6" margin="11" />
+ <pixmapfunction></pixmapfunction>
+ <resources/>
+ <connections/>
+</ui>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/scanresultsitem.cpp b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/scanresultsitem.cpp
new file mode 100755
index 0000000..9cd937c
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/scanresultsitem.cpp
@@ -0,0 +1,18 @@
+/*
+ * wpa_gui - ScanResultsItem class
+ * Copyright (c) 2015, Adrian Nowicki <adinowicki@gmail.com>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include "scanresultsitem.h"
+
+bool ScanResultsItem::operator< (const QTreeWidgetItem &other) const
+{
+ int sortCol = treeWidget()->sortColumn();
+ if (sortCol == 2 || sortCol == 3) {
+ return text(sortCol).toInt() < other.text(sortCol).toInt();
+ }
+ return text(sortCol) < other.text(sortCol);
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/scanresultsitem.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/scanresultsitem.h
new file mode 100755
index 0000000..74887ee
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/scanresultsitem.h
@@ -0,0 +1,21 @@
+/*
+ * wpa_gui - ScanResultsItem class
+ * Copyright (c) 2015, Adrian Nowicki <adinowicki@gmail.com>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef SCANRESULTSITEM_H
+#define SCANRESULTSITEM_H
+
+#include <QTreeWidgetItem>
+
+class ScanResultsItem : public QTreeWidgetItem
+{
+public:
+ ScanResultsItem(QTreeWidget *tree) : QTreeWidgetItem(tree) {}
+ bool operator< (const QTreeWidgetItem &other) const;
+};
+
+#endif /* SCANRESULTSITEM_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/signalbar.cpp b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/signalbar.cpp
new file mode 100755
index 0000000..2bba582
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/signalbar.cpp
@@ -0,0 +1,58 @@
+/*
+ * wpa_gui - SignalBar class
+ * Copyright (c) 2011, Kel Modderman <kel@otaku42.de>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include <cstdio>
+#include <qapplication.h>
+
+#include "signalbar.h"
+
+
+SignalBar::SignalBar(QObject *parent)
+ : QStyledItemDelegate(parent)
+{
+}
+
+
+SignalBar::~SignalBar()
+{
+}
+
+
+void SignalBar::paint(QPainter *painter,
+ const QStyleOptionViewItem &option,
+ const QModelIndex &index) const
+{
+ QStyleOptionProgressBar opts;
+ int signal;
+
+ if (index.column() != 3) {
+ QStyledItemDelegate::paint(painter, option, index);
+ return;
+ }
+
+ if (index.data().toInt() > 0)
+ signal = 0 - (256 - index.data().toInt());
+ else
+ signal = index.data().toInt();
+
+ opts.minimum = -95;
+ opts.maximum = -35;
+ if (signal < opts.minimum)
+ opts.progress = opts.minimum;
+ else if (signal > opts.maximum)
+ opts.progress = opts.maximum;
+ else
+ opts.progress = signal;
+
+ opts.text = QString::number(signal) + " dBm";
+ opts.textVisible = true;
+ opts.rect = option.rect;
+
+ QApplication::style()->drawControl(QStyle::CE_ProgressBar,
+ &opts, painter);
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/signalbar.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/signalbar.h
new file mode 100755
index 0000000..37da5dd
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/signalbar.h
@@ -0,0 +1,28 @@
+/*
+ * wpa_gui - SignalBar class
+ * Copyright (c) 2011, Kel Modderman <kel@otaku42.de>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef SIGNALBAR_H
+#define SIGNALBAR_H
+
+#include <QObject>
+#include <QStyledItemDelegate>
+
+class SignalBar : public QStyledItemDelegate
+{
+ Q_OBJECT
+
+public:
+ SignalBar(QObject *parent = 0);
+ ~SignalBar();
+
+ virtual void paint(QPainter *painter,
+ const QStyleOptionViewItem &option,
+ const QModelIndex &index) const ;
+};
+
+#endif /* SIGNALBAR_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/stringquery.cpp b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/stringquery.cpp
new file mode 100755
index 0000000..420e0be
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/stringquery.cpp
@@ -0,0 +1,31 @@
+/*
+ * wpa_gui - StringQuery class
+ * Copyright (c) 2009, Atheros Communications
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include <cstdio>
+#include <QLabel>
+
+#include "stringquery.h"
+
+
+StringQuery::StringQuery(QString label)
+{
+ edit = new QLineEdit;
+ edit->setFocus();
+ QGridLayout *layout = new QGridLayout;
+ layout->addWidget(new QLabel(label), 0, 0);
+ layout->addWidget(edit, 0, 1);
+ setLayout(layout);
+
+ connect(edit, SIGNAL(returnPressed()), this, SLOT(accept()));
+}
+
+
+QString StringQuery::get_string()
+{
+ return edit->text();
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/stringquery.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/stringquery.h
new file mode 100755
index 0000000..9d6bffd
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/stringquery.h
@@ -0,0 +1,28 @@
+/*
+ * wpa_gui - StringQuery class
+ * Copyright (c) 2009, Atheros Communications
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef STRINGQUERY_H
+#define STRINGQUERY_H
+
+#include <QDialog>
+#include <QLineEdit>
+#include <QGridLayout>
+
+class StringQuery : public QDialog
+{
+ Q_OBJECT
+
+public:
+ StringQuery(QString label);
+ QString get_string();
+
+private:
+ QLineEdit *edit;
+};
+
+#endif /* STRINGQUERY_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/userdatarequest.cpp b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/userdatarequest.cpp
new file mode 100755
index 0000000..9d933b0
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/userdatarequest.cpp
@@ -0,0 +1,94 @@
+/*
+ * wpa_gui - UserDataRequest class
+ * Copyright (c) 2005-2006, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include "userdatarequest.h"
+#include "wpagui.h"
+#include "common/wpa_ctrl.h"
+
+
+UserDataRequest::UserDataRequest(QWidget *parent, const char *, bool,
+ Qt::WindowFlags)
+ : QDialog(parent)
+{
+ setupUi(this);
+
+ connect(buttonOk, SIGNAL(clicked()), this, SLOT(sendReply()));
+ connect(buttonCancel, SIGNAL(clicked()), this, SLOT(reject()));
+ connect(queryEdit, SIGNAL(returnPressed()), this, SLOT(sendReply()));
+}
+
+
+UserDataRequest::~UserDataRequest()
+{
+}
+
+
+void UserDataRequest::languageChange()
+{
+ retranslateUi(this);
+}
+
+
+int UserDataRequest::setParams(WpaGui *_wpagui, const char *reqMsg)
+{
+ char *tmp, *pos, *pos2;
+ wpagui = _wpagui;
+ tmp = strdup(reqMsg);
+ if (tmp == NULL)
+ return -1;
+ pos = strchr(tmp, '-');
+ if (pos == NULL) {
+ free(tmp);
+ return -1;
+ }
+ *pos++ = '\0';
+ field = tmp;
+ pos2 = strchr(pos, ':');
+ if (pos2 == NULL) {
+ free(tmp);
+ return -1;
+ }
+ *pos2++ = '\0';
+
+ networkid = atoi(pos);
+ queryInfo->setText(pos2);
+ if (strcmp(tmp, "PASSWORD") == 0) {
+ queryField->setText(tr("Password: "));
+ queryEdit->setEchoMode(QLineEdit::Password);
+ } else if (strcmp(tmp, "NEW_PASSWORD") == 0) {
+ queryField->setText(tr("New password: "));
+ queryEdit->setEchoMode(QLineEdit::Password);
+ } else if (strcmp(tmp, "IDENTITY") == 0)
+ queryField->setText(tr("Identity: "));
+ else if (strcmp(tmp, "PASSPHRASE") == 0) {
+ queryField->setText(tr("Private key passphrase: "));
+ queryEdit->setEchoMode(QLineEdit::Password);
+ } else
+ queryField->setText(field + ":");
+ free(tmp);
+
+ return 0;
+}
+
+
+void UserDataRequest::sendReply()
+{
+ char reply[10];
+ size_t reply_len = sizeof(reply);
+
+ if (wpagui == NULL) {
+ reject();
+ return;
+ }
+
+ QString cmd = QString(WPA_CTRL_RSP) + field + '-' +
+ QString::number(networkid) + ':' +
+ queryEdit->text();
+ wpagui->ctrlRequest(cmd.toLocal8Bit().constData(), reply, &reply_len);
+ accept();
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/userdatarequest.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/userdatarequest.h
new file mode 100755
index 0000000..b6d1ad2
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/userdatarequest.h
@@ -0,0 +1,40 @@
+/*
+ * wpa_gui - UserDataRequest class
+ * Copyright (c) 2005-2006, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef USERDATAREQUEST_H
+#define USERDATAREQUEST_H
+
+#include <QObject>
+#include "ui_userdatarequest.h"
+
+class WpaGui;
+
+class UserDataRequest : public QDialog, public Ui::UserDataRequest
+{
+ Q_OBJECT
+
+public:
+ UserDataRequest(QWidget *parent = 0, const char *name = 0,
+ bool modal = false, Qt::WindowFlags fl = 0);
+ ~UserDataRequest();
+
+ int setParams(WpaGui *_wpagui, const char *reqMsg);
+
+public slots:
+ virtual void sendReply();
+
+protected slots:
+ virtual void languageChange();
+
+private:
+ WpaGui *wpagui;
+ int networkid;
+ QString field;
+};
+
+#endif /* USERDATAREQUEST_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/userdatarequest.ui b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/userdatarequest.ui
new file mode 100755
index 0000000..1de2a26
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/userdatarequest.ui
@@ -0,0 +1,109 @@
+<ui version="4.0" stdsetdef="1" >
+ <author></author>
+ <comment></comment>
+ <exportmacro></exportmacro>
+ <class>UserDataRequest</class>
+ <widget class="QDialog" name="UserDataRequest" >
+ <property name="geometry" >
+ <rect>
+ <x>0</x>
+ <y>0</y>
+ <width>216</width>
+ <height>103</height>
+ </rect>
+ </property>
+ <property name="windowTitle" >
+ <string>Authentication credentials required</string>
+ </property>
+ <property name="sizeGripEnabled" >
+ <bool>true</bool>
+ </property>
+ <layout class="QVBoxLayout" >
+ <item>
+ <widget class="QLabel" name="queryInfo" >
+ <property name="text" >
+ <string/>
+ </property>
+ </widget>
+ </item>
+ <item>
+ <layout class="QHBoxLayout" >
+ <property name="margin" >
+ <number>0</number>
+ </property>
+ <item>
+ <widget class="QLabel" name="queryField" >
+ <property name="text" >
+ <string/>
+ </property>
+ </widget>
+ </item>
+ <item>
+ <widget class="QLineEdit" name="queryEdit" >
+ <property name="enabled" >
+ <bool>true</bool>
+ </property>
+ <property name="echoMode" >
+ <enum>QLineEdit::Password</enum>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </item>
+ <item>
+ <layout class="QHBoxLayout" >
+ <property name="margin" >
+ <number>0</number>
+ </property>
+ <item>
+ <spacer name="spacer4" >
+ <property name="sizeHint" >
+ <size>
+ <width>20</width>
+ <height>20</height>
+ </size>
+ </property>
+ <property name="sizeType" >
+ <enum>Expanding</enum>
+ </property>
+ <property name="orientation" >
+ <enum>Horizontal</enum>
+ </property>
+ </spacer>
+ </item>
+ <item>
+ <widget class="QPushButton" name="buttonOk" >
+ <property name="text" >
+ <string>&OK</string>
+ </property>
+ <property name="shortcut" >
+ <string/>
+ </property>
+ <property name="autoDefault" >
+ <bool>true</bool>
+ </property>
+ <property name="default" >
+ <bool>true</bool>
+ </property>
+ </widget>
+ </item>
+ <item>
+ <widget class="QPushButton" name="buttonCancel" >
+ <property name="text" >
+ <string>&Cancel</string>
+ </property>
+ <property name="shortcut" >
+ <string/>
+ </property>
+ <property name="autoDefault" >
+ <bool>true</bool>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </item>
+ </layout>
+ </widget>
+ <layoutdefault spacing="6" margin="11" />
+ <pixmapfunction></pixmapfunction>
+</ui>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpa_gui.desktop b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpa_gui.desktop
new file mode 100755
index 0000000..ccc7d87
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpa_gui.desktop
@@ -0,0 +1,10 @@
+[Desktop Entry]
+Version=1.0
+Name=wpa_gui
+Comment=Graphical user interface for wpa_supplicant
+Exec=wpa_gui
+Icon=wpa_gui
+GenericName=wpa_supplicant user interface
+Terminal=false
+Type=Application
+Categories=Qt;Network;
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpa_gui.pro b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpa_gui.pro
new file mode 100755
index 0000000..3fa734b
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpa_gui.pro
@@ -0,0 +1,73 @@
+TEMPLATE = app
+LANGUAGE = C++
+TRANSLATIONS = lang/wpa_gui_de.ts
+greaterThan(QT_MAJOR_VERSION, 4): QT += widgets
+
+CONFIG += qt warn_on release
+
+DEFINES += CONFIG_CTRL_IFACE
+
+win32 {
+ LIBS += -lws2_32 -static
+ DEFINES += CONFIG_NATIVE_WINDOWS CONFIG_CTRL_IFACE_NAMED_PIPE
+ SOURCES += ../../src/utils/os_win32.c
+} else:win32-g++ {
+ # cross compilation to win32
+ LIBS += -lws2_32 -static -mwindows
+ DEFINES += CONFIG_NATIVE_WINDOWS CONFIG_CTRL_IFACE_NAMED_PIPE
+ SOURCES += ../../src/utils/os_win32.c
+ RESOURCES += icons_png.qrc
+} else:win32-x-g++ {
+ # cross compilation to win32
+ LIBS += -lws2_32 -static -mwindows
+ DEFINES += CONFIG_NATIVE_WINDOWS CONFIG_CTRL_IFACE_NAMED_PIPE
+ DEFINES += _X86_
+ SOURCES += ../../src/utils/os_win32.c
+ RESOURCES += icons_png.qrc
+} else {
+ DEFINES += CONFIG_CTRL_IFACE_UNIX
+ SOURCES += ../../src/utils/os_unix.c
+}
+
+INCLUDEPATH += . .. ../../src ../../src/utils
+
+HEADERS += wpamsg.h \
+ wpagui.h \
+ eventhistory.h \
+ scanresults.h \
+ scanresultsitem.h \
+ signalbar.h \
+ userdatarequest.h \
+ networkconfig.h \
+ addinterface.h \
+ peers.h \
+ stringquery.h
+
+SOURCES += main.cpp \
+ wpagui.cpp \
+ eventhistory.cpp \
+ scanresults.cpp \
+ scanresultsitem.cpp \
+ signalbar.cpp \
+ userdatarequest.cpp \
+ networkconfig.cpp \
+ addinterface.cpp \
+ peers.cpp \
+ stringquery.cpp \
+ ../../src/common/wpa_ctrl.c
+
+RESOURCES += icons.qrc
+
+FORMS = wpagui.ui \
+ eventhistory.ui \
+ scanresults.ui \
+ userdatarequest.ui \
+ networkconfig.ui \
+ peers.ui
+
+
+unix {
+ UI_DIR = .ui
+ MOC_DIR = .moc
+ OBJECTS_DIR = .obj
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpagui.cpp b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpagui.cpp
new file mode 100755
index 0000000..9404ab4
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpagui.cpp
@@ -0,0 +1,1913 @@
+/*
+ * wpa_gui - WpaGui class
+ * Copyright (c) 2005-2011, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifdef CONFIG_NATIVE_WINDOWS
+#include <windows.h>
+#endif /* CONFIG_NATIVE_WINDOWS */
+
+#include <cstdio>
+#include <unistd.h>
+#include <chrono>
+#include <thread>
+#include <QMessageBox>
+#include <QCloseEvent>
+#include <QImageReader>
+#include <QSettings>
+
+#include "wpagui.h"
+#include "dirent.h"
+#include "common/wpa_ctrl.h"
+#include "userdatarequest.h"
+#include "networkconfig.h"
+
+
+#ifndef QT_NO_DEBUG
+#define debug(M, ...) qDebug("DEBUG %d: " M, __LINE__, ##__VA_ARGS__)
+#else
+#define debug(M, ...) do {} while (0)
+#endif
+
+
+WpaGui::WpaGui(QApplication *_app, QWidget *parent, const char *,
+ Qt::WindowFlags)
+ : QMainWindow(parent), app(_app)
+{
+ setupUi(this);
+ this->setWindowFlags(Qt::Dialog);
+
+#ifdef CONFIG_NATIVE_WINDOWS
+ fileStopServiceAction = new QAction(this);
+ fileStopServiceAction->setObjectName("Stop Service");
+ fileStopServiceAction->setIconText(tr("Stop Service"));
+ fileMenu->insertAction(actionWPS, fileStopServiceAction);
+
+ fileStartServiceAction = new QAction(this);
+ fileStartServiceAction->setObjectName("Start Service");
+ fileStartServiceAction->setIconText(tr("Start Service"));
+ fileMenu->insertAction(fileStopServiceAction, fileStartServiceAction);
+
+ connect(fileStartServiceAction, SIGNAL(triggered()), this,
+ SLOT(startService()));
+ connect(fileStopServiceAction, SIGNAL(triggered()), this,
+ SLOT(stopService()));
+
+ addInterfaceAction = new QAction(this);
+ addInterfaceAction->setIconText(tr("Add Interface"));
+ fileMenu->insertAction(fileStartServiceAction, addInterfaceAction);
+
+ connect(addInterfaceAction, SIGNAL(triggered()), this,
+ SLOT(addInterface()));
+#endif /* CONFIG_NATIVE_WINDOWS */
+
+ (void) statusBar();
+
+ /*
+ * Disable WPS tab by default; it will be enabled if wpa_supplicant is
+ * built with WPS support.
+ */
+ wpsTab->setEnabled(false);
+ wpaguiTab->setTabEnabled(wpaguiTab->indexOf(wpsTab), false);
+
+ connect(fileEventHistoryAction, SIGNAL(triggered()), this,
+ SLOT(eventHistory()));
+ connect(fileSaveConfigAction, SIGNAL(triggered()), this,
+ SLOT(saveConfig()));
+ connect(actionWPS, SIGNAL(triggered()), this, SLOT(wpsDialog()));
+ connect(actionPeers, SIGNAL(triggered()), this, SLOT(peersDialog()));
+ connect(fileExitAction, SIGNAL(triggered()), qApp, SLOT(quit()));
+ connect(networkAddAction, SIGNAL(triggered()), this,
+ SLOT(addNetwork()));
+ connect(networkEditAction, SIGNAL(triggered()), this,
+ SLOT(editSelectedNetwork()));
+ connect(networkRemoveAction, SIGNAL(triggered()), this,
+ SLOT(removeSelectedNetwork()));
+ connect(networkEnableAllAction, SIGNAL(triggered()), this,
+ SLOT(enableAllNetworks()));
+ connect(networkDisableAllAction, SIGNAL(triggered()), this,
+ SLOT(disableAllNetworks()));
+ connect(networkRemoveAllAction, SIGNAL(triggered()), this,
+ SLOT(removeAllNetworks()));
+ connect(helpIndexAction, SIGNAL(triggered()), this, SLOT(helpIndex()));
+ connect(helpContentsAction, SIGNAL(triggered()), this,
+ SLOT(helpContents()));
+ connect(helpAboutAction, SIGNAL(triggered()), this, SLOT(helpAbout()));
+ connect(disconnectButton, SIGNAL(clicked()), this, SLOT(disconnect()));
+ connect(scanButton, SIGNAL(clicked()), this, SLOT(scan()));
+ connect(connectButton, SIGNAL(clicked()), this, SLOT(connectB()));
+ connect(adapterSelect, SIGNAL(activated(const QString&)), this,
+ SLOT(selectAdapter(const QString&)));
+ connect(networkSelect, SIGNAL(activated(const QString&)), this,
+ SLOT(selectNetwork(const QString&)));
+ connect(addNetworkButton, SIGNAL(clicked()), this, SLOT(addNetwork()));
+ connect(editNetworkButton, SIGNAL(clicked()), this,
+ SLOT(editListedNetwork()));
+ connect(removeNetworkButton, SIGNAL(clicked()), this,
+ SLOT(removeListedNetwork()));
+ connect(networkList, SIGNAL(itemSelectionChanged()), this,
+ SLOT(updateNetworkDisabledStatus()));
+ connect(enableRadioButton, SIGNAL(toggled(bool)), this,
+ SLOT(enableListedNetwork(bool)));
+ connect(disableRadioButton, SIGNAL(toggled(bool)), this,
+ SLOT(disableListedNetwork(bool)));
+ connect(scanNetworkButton, SIGNAL(clicked()), this, SLOT(scan()));
+ connect(networkList, SIGNAL(itemDoubleClicked(QListWidgetItem *)),
+ this, SLOT(editListedNetwork()));
+ connect(wpaguiTab, SIGNAL(currentChanged(int)), this,
+ SLOT(tabChanged(int)));
+ connect(wpsPbcButton, SIGNAL(clicked()), this, SLOT(wpsPbc()));
+ connect(wpsPinButton, SIGNAL(clicked()), this, SLOT(wpsGeneratePin()));
+ connect(wpsApPinEdit, SIGNAL(textChanged(const QString &)), this,
+ SLOT(wpsApPinChanged(const QString &)));
+ connect(wpsApPinButton, SIGNAL(clicked()), this, SLOT(wpsApPin()));
+
+ eh = NULL;
+ scanres = NULL;
+ peers = NULL;
+ add_iface = NULL;
+ udr = NULL;
+ tray_icon = NULL;
+ startInTray = false;
+ quietMode = false;
+ ctrl_iface = NULL;
+ ctrl_conn = NULL;
+ monitor_conn = NULL;
+ msgNotifier = NULL;
+ ctrl_iface_dir = strdup("/var/run/wpa_supplicant");
+ signalMeterInterval = 0;
+
+ parse_argv();
+
+#ifndef QT_NO_SESSIONMANAGER
+ if (app->isSessionRestored()) {
+ QSettings settings("wpa_supplicant", "wpa_gui");
+ settings.beginGroup("state");
+ if (app->sessionId().compare(settings.value("session_id").
+ toString()) == 0)
+ startInTray = settings.value("in_tray").toBool();
+ settings.endGroup();
+ }
+#endif
+
+ if (QSystemTrayIcon::isSystemTrayAvailable())
+ createTrayIcon(startInTray);
+ else
+ show();
+
+ connectedToService = false;
+ textStatus->setText(tr("connecting to wpa_supplicant"));
+ timer = new QTimer(this);
+ connect(timer, SIGNAL(timeout()), SLOT(ping()));
+ timer->setSingleShot(false);
+ timer->start(1000);
+
+ signalMeterTimer = new QTimer(this);
+ signalMeterTimer->setInterval(signalMeterInterval);
+ connect(signalMeterTimer, SIGNAL(timeout()), SLOT(signalMeterUpdate()));
+
+ if (openCtrlConnection(ctrl_iface) < 0) {
+ debug("Failed to open control connection to "
+ "wpa_supplicant.");
+ }
+
+ updateStatus();
+ networkMayHaveChanged = true;
+ updateNetworks();
+}
+
+
+WpaGui::~WpaGui()
+{
+ delete msgNotifier;
+
+ if (monitor_conn) {
+ wpa_ctrl_detach(monitor_conn);
+ wpa_ctrl_close(monitor_conn);
+ monitor_conn = NULL;
+ }
+ if (ctrl_conn) {
+ wpa_ctrl_close(ctrl_conn);
+ ctrl_conn = NULL;
+ }
+
+ if (eh) {
+ eh->close();
+ delete eh;
+ eh = NULL;
+ }
+
+ if (scanres) {
+ scanres->close();
+ delete scanres;
+ scanres = NULL;
+ }
+
+ if (peers) {
+ peers->close();
+ delete peers;
+ peers = NULL;
+ }
+
+ if (add_iface) {
+ add_iface->close();
+ delete add_iface;
+ add_iface = NULL;
+ }
+
+ if (udr) {
+ udr->close();
+ delete udr;
+ udr = NULL;
+ }
+
+ free(ctrl_iface);
+ ctrl_iface = NULL;
+
+ free(ctrl_iface_dir);
+ ctrl_iface_dir = NULL;
+}
+
+
+void WpaGui::languageChange()
+{
+ retranslateUi(this);
+}
+
+
+void WpaGui::parse_argv()
+{
+ int c;
+ WpaGuiApp *app = qobject_cast<WpaGuiApp*>(qApp);
+ for (;;) {
+ c = getopt(app->argc, app->argv, "i:m:p:tq");
+ if (c < 0)
+ break;
+ switch (c) {
+ case 'i':
+ free(ctrl_iface);
+ ctrl_iface = strdup(optarg);
+ break;
+ case 'm':
+ signalMeterInterval = atoi(optarg) * 1000;
+ break;
+ case 'p':
+ free(ctrl_iface_dir);
+ ctrl_iface_dir = strdup(optarg);
+ break;
+ case 't':
+ startInTray = true;
+ break;
+ case 'q':
+ quietMode = true;
+ break;
+ }
+ }
+}
+
+
+int WpaGui::openCtrlConnection(const char *ifname)
+{
+ char *cfile;
+ int flen;
+ char buf[2048], *pos, *pos2;
+ size_t len;
+
+ if (ifname) {
+ if (ifname != ctrl_iface) {
+ free(ctrl_iface);
+ ctrl_iface = strdup(ifname);
+ }
+ } else {
+#ifdef CONFIG_CTRL_IFACE_UDP
+ free(ctrl_iface);
+ ctrl_iface = strdup("udp");
+#endif /* CONFIG_CTRL_IFACE_UDP */
+#ifdef CONFIG_CTRL_IFACE_UNIX
+ struct dirent *dent;
+ DIR *dir = opendir(ctrl_iface_dir);
+ free(ctrl_iface);
+ ctrl_iface = NULL;
+ if (dir) {
+ while ((dent = readdir(dir))) {
+#ifdef _DIRENT_HAVE_D_TYPE
+ /* Skip the file if it is not a socket.
+ * Also accept DT_UNKNOWN (0) in case
+ * the C library or underlying file
+ * system does not support d_type. */
+ if (dent->d_type != DT_SOCK &&
+ dent->d_type != DT_UNKNOWN)
+ continue;
+#endif /* _DIRENT_HAVE_D_TYPE */
+
+ if (strcmp(dent->d_name, ".") == 0 ||
+ strcmp(dent->d_name, "..") == 0)
+ continue;
+ debug("Selected interface '%s'",
+ dent->d_name);
+ ctrl_iface = strdup(dent->d_name);
+ break;
+ }
+ closedir(dir);
+ }
+#endif /* CONFIG_CTRL_IFACE_UNIX */
+#ifdef CONFIG_CTRL_IFACE_NAMED_PIPE
+ struct wpa_ctrl *ctrl;
+ int ret;
+
+ free(ctrl_iface);
+ ctrl_iface = NULL;
+
+ ctrl = wpa_ctrl_open(NULL);
+ if (ctrl) {
+ len = sizeof(buf) - 1;
+ ret = wpa_ctrl_request(ctrl, "INTERFACES", 10, buf,
+ &len, NULL);
+ if (ret >= 0) {
+ connectedToService = true;
+ buf[len] = '\0';
+ pos = strchr(buf, '\n');
+ if (pos)
+ *pos = '\0';
+ ctrl_iface = strdup(buf);
+ }
+ wpa_ctrl_close(ctrl);
+ }
+#endif /* CONFIG_CTRL_IFACE_NAMED_PIPE */
+ }
+
+ if (ctrl_iface == NULL) {
+#ifdef CONFIG_NATIVE_WINDOWS
+ static bool first = true;
+ if (first && !serviceRunning()) {
+ first = false;
+ if (QMessageBox::warning(
+ this, qAppName(),
+ tr("wpa_supplicant service is not "
+ "running.\n"
+ "Do you want to start it?"),
+ QMessageBox::Yes | QMessageBox::No) ==
+ QMessageBox::Yes)
+ startService();
+ }
+#endif /* CONFIG_NATIVE_WINDOWS */
+ return -1;
+ }
+
+#ifdef CONFIG_CTRL_IFACE_UNIX
+ flen = strlen(ctrl_iface_dir) + strlen(ctrl_iface) + 2;
+ cfile = (char *) malloc(flen);
+ if (cfile == NULL)
+ return -1;
+ snprintf(cfile, flen, "%s/%s", ctrl_iface_dir, ctrl_iface);
+#else /* CONFIG_CTRL_IFACE_UNIX */
+ flen = strlen(ctrl_iface) + 1;
+ cfile = (char *) malloc(flen);
+ if (cfile == NULL)
+ return -1;
+ snprintf(cfile, flen, "%s", ctrl_iface);
+#endif /* CONFIG_CTRL_IFACE_UNIX */
+
+ if (ctrl_conn) {
+ wpa_ctrl_close(ctrl_conn);
+ ctrl_conn = NULL;
+ }
+
+ if (monitor_conn) {
+ delete msgNotifier;
+ msgNotifier = NULL;
+ wpa_ctrl_detach(monitor_conn);
+ wpa_ctrl_close(monitor_conn);
+ monitor_conn = NULL;
+ }
+
+ debug("Trying to connect to '%s'", cfile);
+ ctrl_conn = wpa_ctrl_open(cfile);
+ if (ctrl_conn == NULL) {
+ free(cfile);
+ return -1;
+ }
+ monitor_conn = wpa_ctrl_open(cfile);
+ free(cfile);
+ if (monitor_conn == NULL) {
+ wpa_ctrl_close(ctrl_conn);
+ return -1;
+ }
+ if (wpa_ctrl_attach(monitor_conn)) {
+ debug("Failed to attach to wpa_supplicant");
+ wpa_ctrl_close(monitor_conn);
+ monitor_conn = NULL;
+ wpa_ctrl_close(ctrl_conn);
+ ctrl_conn = NULL;
+ return -1;
+ }
+
+#if defined(CONFIG_CTRL_IFACE_UNIX) || defined(CONFIG_CTRL_IFACE_UDP)
+ msgNotifier = new QSocketNotifier(wpa_ctrl_get_fd(monitor_conn),
+ QSocketNotifier::Read, this);
+ connect(msgNotifier, SIGNAL(activated(int)), SLOT(receiveMsgs()));
+#endif
+
+ adapterSelect->clear();
+ adapterSelect->addItem(ctrl_iface);
+ adapterSelect->setCurrentIndex(0);
+
+ len = sizeof(buf) - 1;
+ if (wpa_ctrl_request(ctrl_conn, "INTERFACES", 10, buf, &len, NULL) >=
+ 0) {
+ buf[len] = '\0';
+ pos = buf;
+ while (*pos) {
+ pos2 = strchr(pos, '\n');
+ if (pos2)
+ *pos2 = '\0';
+ if (strcmp(pos, ctrl_iface) != 0)
+ adapterSelect->addItem(pos);
+ if (pos2)
+ pos = pos2 + 1;
+ else
+ break;
+ }
+ }
+
+ len = sizeof(buf) - 1;
+ if (wpa_ctrl_request(ctrl_conn, "GET_CAPABILITY eap", 18, buf, &len,
+ NULL) >= 0) {
+ buf[len] = '\0';
+
+ QString res(buf);
+ QStringList types = res.split(QChar(' '));
+ bool wps = types.contains("WSC");
+ actionWPS->setEnabled(wps);
+ wpsTab->setEnabled(wps);
+ wpaguiTab->setTabEnabled(wpaguiTab->indexOf(wpsTab), wps);
+ }
+
+ return 0;
+}
+
+
+int WpaGui::ctrlRequest(const char *cmd, char *buf, size_t *buflen)
+{
+ int ret;
+
+ if (ctrl_conn == NULL)
+ return -3;
+ ret = wpa_ctrl_request(ctrl_conn, cmd, strlen(cmd), buf, buflen, NULL);
+ if (ret == -2)
+ debug("'%s' command timed out.", cmd);
+ else if (ret < 0)
+ debug("'%s' command failed.", cmd);
+
+ return ret;
+}
+
+
+QString WpaGui::wpaStateTranslate(char *state)
+{
+ if (!strcmp(state, "DISCONNECTED"))
+ return tr("Disconnected");
+ else if (!strcmp(state, "INACTIVE"))
+ return tr("Inactive");
+ else if (!strcmp(state, "SCANNING"))
+ return tr("Scanning");
+ else if (!strcmp(state, "AUTHENTICATING"))
+ return tr("Authenticating");
+ else if (!strcmp(state, "ASSOCIATING"))
+ return tr("Associating");
+ else if (!strcmp(state, "ASSOCIATED"))
+ return tr("Associated");
+ else if (!strcmp(state, "4WAY_HANDSHAKE"))
+ return tr("4-Way Handshake");
+ else if (!strcmp(state, "GROUP_HANDSHAKE"))
+ return tr("Group Handshake");
+ else if (!strcmp(state, "COMPLETED"))
+ return tr("Completed");
+ else
+ return tr("Unknown");
+}
+
+
+void WpaGui::updateStatus()
+{
+ char buf[2048], *start, *end, *pos;
+ size_t len;
+
+ pingsToStatusUpdate = 10;
+
+ len = sizeof(buf) - 1;
+ if (ctrl_conn == NULL || ctrlRequest("STATUS", buf, &len) < 0) {
+ textStatus->setText(tr("Could not get status from "
+ "wpa_supplicant"));
+ textAuthentication->clear();
+ textEncryption->clear();
+ textSsid->clear();
+ textBssid->clear();
+ textIpAddress->clear();
+ updateTrayToolTip(tr("no status information"));
+ updateTrayIcon(TrayIconOffline);
+ signalMeterTimer->stop();
+
+#ifdef CONFIG_NATIVE_WINDOWS
+ static bool first = true;
+ if (first && connectedToService &&
+ (ctrl_iface == NULL || *ctrl_iface == '\0')) {
+ first = false;
+ if (QMessageBox::information(
+ this, qAppName(),
+ tr("No network interfaces in use.\n"
+ "Would you like to add one?"),
+ QMessageBox::Yes | QMessageBox::No) ==
+ QMessageBox::Yes)
+ addInterface();
+ }
+#endif /* CONFIG_NATIVE_WINDOWS */
+ return;
+ }
+
+ buf[len] = '\0';
+
+ bool auth_updated = false, ssid_updated = false;
+ bool bssid_updated = false, ipaddr_updated = false;
+ bool status_updated = false;
+ char *pairwise_cipher = NULL, *group_cipher = NULL;
+ char *mode = NULL;
+
+ start = buf;
+ while (*start) {
+ bool last = false;
+ end = strchr(start, '\n');
+ if (end == NULL) {
+ last = true;
+ end = start;
+ while (end[0] && end[1])
+ end++;
+ }
+ *end = '\0';
+
+ pos = strchr(start, '=');
+ if (pos) {
+ *pos++ = '\0';
+ if (strcmp(start, "bssid") == 0) {
+ bssid_updated = true;
+ textBssid->setText(pos);
+ } else if (strcmp(start, "ssid") == 0) {
+ ssid_updated = true;
+ textSsid->setText(pos);
+ updateTrayToolTip(pos + tr(" (associated)"));
+ if (!signalMeterInterval) {
+ /* if signal meter is not enabled show
+ * full signal strength */
+ updateTrayIcon(TrayIconSignalExcellent);
+ }
+ } else if (strcmp(start, "ip_address") == 0) {
+ ipaddr_updated = true;
+ textIpAddress->setText(pos);
+ } else if (strcmp(start, "wpa_state") == 0) {
+ status_updated = true;
+ textStatus->setText(wpaStateTranslate(pos));
+ } else if (strcmp(start, "key_mgmt") == 0) {
+ auth_updated = true;
+ textAuthentication->setText(pos);
+ /* TODO: could add EAP status to this */
+ } else if (strcmp(start, "pairwise_cipher") == 0) {
+ pairwise_cipher = pos;
+ } else if (strcmp(start, "group_cipher") == 0) {
+ group_cipher = pos;
+ } else if (strcmp(start, "mode") == 0) {
+ mode = pos;
+ }
+ }
+
+ if (last)
+ break;
+ start = end + 1;
+ }
+ if (status_updated && mode)
+ textStatus->setText(textStatus->text() + " (" + mode + ")");
+
+ if (pairwise_cipher || group_cipher) {
+ QString encr;
+ if (pairwise_cipher && group_cipher &&
+ strcmp(pairwise_cipher, group_cipher) != 0) {
+ encr.append(pairwise_cipher);
+ encr.append(" + ");
+ encr.append(group_cipher);
+ } else if (pairwise_cipher) {
+ encr.append(pairwise_cipher);
+ } else {
+ encr.append(group_cipher);
+ encr.append(" [group key only]");
+ }
+ textEncryption->setText(encr);
+ } else
+ textEncryption->clear();
+
+ if (signalMeterInterval) {
+ /*
+ * Handle signal meter service. When network is not associated,
+ * deactivate timer, otherwise keep it going. Tray icon has to
+ * be initialized here, because of the initial delay of the
+ * timer.
+ */
+ if (ssid_updated) {
+ if (!signalMeterTimer->isActive()) {
+ updateTrayIcon(TrayIconConnected);
+ signalMeterTimer->start();
+ }
+ } else {
+ signalMeterTimer->stop();
+ }
+ }
+
+ if (!status_updated)
+ textStatus->clear();
+ if (!auth_updated)
+ textAuthentication->clear();
+ if (!ssid_updated) {
+ textSsid->clear();
+ updateTrayToolTip(tr("(not-associated)"));
+ updateTrayIcon(TrayIconOffline);
+ }
+ if (!bssid_updated)
+ textBssid->clear();
+ if (!ipaddr_updated)
+ textIpAddress->clear();
+}
+
+
+void WpaGui::updateNetworks()
+{
+ char buf[4096], *start, *end, *id, *ssid, *bssid, *flags;
+ size_t len;
+ int first_active = -1;
+ int was_selected = -1;
+ bool current = false;
+
+ if (!networkMayHaveChanged)
+ return;
+
+ if (networkList->currentRow() >= 0)
+ was_selected = networkList->currentRow();
+
+ networkSelect->clear();
+ networkList->clear();
+
+ if (ctrl_conn == NULL)
+ return;
+
+ len = sizeof(buf) - 1;
+ if (ctrlRequest("LIST_NETWORKS", buf, &len) < 0)
+ return;
+
+ buf[len] = '\0';
+ start = strchr(buf, '\n');
+ if (start == NULL)
+ return;
+ start++;
+
+ while (*start) {
+ bool last = false;
+ end = strchr(start, '\n');
+ if (end == NULL) {
+ last = true;
+ end = start;
+ while (end[0] && end[1])
+ end++;
+ }
+ *end = '\0';
+
+ id = start;
+ ssid = strchr(id, '\t');
+ if (ssid == NULL)
+ break;
+ *ssid++ = '\0';
+ bssid = strchr(ssid, '\t');
+ if (bssid == NULL)
+ break;
+ *bssid++ = '\0';
+ flags = strchr(bssid, '\t');
+ if (flags == NULL)
+ break;
+ *flags++ = '\0';
+
+ if (strstr(flags, "[DISABLED][P2P-PERSISTENT]")) {
+ if (last)
+ break;
+ start = end + 1;
+ continue;
+ }
+
+ QString network(id);
+ network.append(": ");
+ network.append(ssid);
+ networkSelect->addItem(network);
+ networkList->addItem(network);
+
+ if (strstr(flags, "[CURRENT]")) {
+ networkSelect->setCurrentIndex(networkSelect->count() -
+ 1);
+ current = true;
+ } else if (first_active < 0 &&
+ strstr(flags, "[DISABLED]") == NULL)
+ first_active = networkSelect->count() - 1;
+
+ start = end + 1;
+ if (*start && strchr(start, '\n'))
+ continue;
+
+ /* avoid race conditions */
+ std::this_thread::sleep_for(std::chrono::milliseconds(200));
+ QString cmd("LIST_NETWORKS LAST_ID=");
+ cmd.append(id);
+ if (ctrlRequest(cmd.toLocal8Bit().constData(), buf, &len) < 0)
+ break;
+
+ buf[len] = '\0';
+ start = strchr(buf, '\n');
+ if (!start)
+ break;
+ start++;
+ }
+
+ if (networkSelect->count() > 1)
+ networkSelect->addItem(tr("Select any network"));
+
+ if (!current && first_active >= 0)
+ networkSelect->setCurrentIndex(first_active);
+
+ if (was_selected >= 0 && networkList->count() > 0) {
+ if (was_selected < networkList->count())
+ networkList->setCurrentRow(was_selected);
+ else
+ networkList->setCurrentRow(networkList->count() - 1);
+ }
+ else
+ networkList->setCurrentRow(networkSelect->currentIndex());
+
+ networkMayHaveChanged = false;
+}
+
+
+void WpaGui::helpIndex()
+{
+ debug("helpIndex");
+}
+
+
+void WpaGui::helpContents()
+{
+ debug("helpContents");
+}
+
+
+void WpaGui::helpAbout()
+{
+ QMessageBox::about(this, "wpa_gui for wpa_supplicant",
+ "Copyright (c) 2003-2015,\n"
+ "Jouni Malinen <j@w1.fi>\n"
+ "and contributors.\n"
+ "\n"
+ "This software may be distributed under\n"
+ "the terms of the BSD license.\n"
+ "See README for more details.\n"
+ "\n"
+ "This product includes software developed\n"
+ "by the OpenSSL Project for use in the\n"
+ "OpenSSL Toolkit (http://www.openssl.org/)\n");
+}
+
+
+void WpaGui::disconnect()
+{
+ char reply[10];
+ size_t reply_len = sizeof(reply);
+ ctrlRequest("DISCONNECT", reply, &reply_len);
+ stopWpsRun(false);
+}
+
+
+void WpaGui::scan()
+{
+ if (scanres) {
+ scanres->close();
+ delete scanres;
+ }
+
+ scanres = new ScanResults();
+ if (scanres == NULL)
+ return;
+ scanres->setWpaGui(this);
+ scanres->show();
+ scanres->exec();
+}
+
+
+void WpaGui::eventHistory()
+{
+ if (eh) {
+ eh->close();
+ delete eh;
+ }
+
+ eh = new EventHistory();
+ if (eh == NULL)
+ return;
+ eh->addEvents(msgs);
+ eh->show();
+ eh->exec();
+}
+
+
+void WpaGui::ping()
+{
+ char buf[10];
+ size_t len;
+
+#ifdef CONFIG_CTRL_IFACE_NAMED_PIPE
+ /*
+ * QSocketNotifier cannot be used with Windows named pipes, so use a
+ * timer to check for received messages for now. This could be
+ * optimized be doing something specific to named pipes or Windows
+ * events, but it is not clear what would be the best way of doing that
+ * in Qt.
+ */
+ receiveMsgs();
+#endif /* CONFIG_CTRL_IFACE_NAMED_PIPE */
+
+ if (scanres && !scanres->isVisible()) {
+ delete scanres;
+ scanres = NULL;
+ }
+
+ if (eh && !eh->isVisible()) {
+ delete eh;
+ eh = NULL;
+ }
+
+ if (udr && !udr->isVisible()) {
+ delete udr;
+ udr = NULL;
+ }
+
+ len = sizeof(buf) - 1;
+ if (ctrlRequest("PING", buf, &len) < 0) {
+ debug("PING failed - trying to reconnect");
+ if (openCtrlConnection(ctrl_iface) >= 0) {
+ debug("Reconnected successfully");
+ pingsToStatusUpdate = 0;
+ }
+ }
+
+ pingsToStatusUpdate--;
+ if (pingsToStatusUpdate <= 0) {
+ updateStatus();
+ updateNetworks();
+ }
+
+#ifndef CONFIG_CTRL_IFACE_NAMED_PIPE
+ /* Use less frequent pings and status updates when the main window is
+ * hidden (running in taskbar). */
+ int interval = isHidden() ? 5000 : 1000;
+ if (timer->interval() != interval)
+ timer->setInterval(interval);
+#endif /* CONFIG_CTRL_IFACE_NAMED_PIPE */
+}
+
+
+void WpaGui::signalMeterUpdate()
+{
+ char reply[128];
+ size_t reply_len = sizeof(reply);
+ char *rssi;
+ int rssi_value;
+
+ ctrlRequest("SIGNAL_POLL", reply, &reply_len);
+
+ /* In order to eliminate signal strength fluctuations, try
+ * to obtain averaged RSSI value in the first place. */
+ if ((rssi = strstr(reply, "AVG_RSSI=")) != NULL)
+ rssi_value = atoi(&rssi[sizeof("AVG_RSSI")]);
+ else if ((rssi = strstr(reply, "RSSI=")) != NULL)
+ rssi_value = atoi(&rssi[sizeof("RSSI")]);
+ else {
+ debug("Failed to get RSSI value");
+ updateTrayIcon(TrayIconSignalNone);
+ return;
+ }
+
+ debug("RSSI value: %d", rssi_value);
+
+ /*
+ * NOTE: The code below assumes, that the unit of the value returned
+ * by the SIGNAL POLL request is dBm. It might not be true for all
+ * wpa_supplicant drivers.
+ */
+
+ /*
+ * Calibration is based on "various Internet sources". Nonetheless,
+ * it seems to be compatible with the Windows 8.1 strength meter -
+ * tested on Intel Centrino Advanced-N 6235.
+ */
+ if (rssi_value >= -60)
+ updateTrayIcon(TrayIconSignalExcellent);
+ else if (rssi_value >= -68)
+ updateTrayIcon(TrayIconSignalGood);
+ else if (rssi_value >= -76)
+ updateTrayIcon(TrayIconSignalOk);
+ else if (rssi_value >= -84)
+ updateTrayIcon(TrayIconSignalWeak);
+ else
+ updateTrayIcon(TrayIconSignalNone);
+}
+
+
+static int str_match(const char *a, const char *b)
+{
+ return strncmp(a, b, strlen(b)) == 0;
+}
+
+
+void WpaGui::processMsg(char *msg)
+{
+ char *pos = msg, *pos2;
+ int priority = 2;
+
+ if (*pos == '<') {
+ /* skip priority */
+ pos++;
+ priority = atoi(pos);
+ pos = strchr(pos, '>');
+ if (pos)
+ pos++;
+ else
+ pos = msg;
+ }
+
+ WpaMsg wm(pos, priority);
+ if (eh)
+ eh->addEvent(wm);
+ if (peers)
+ peers->event_notify(wm);
+ msgs.append(wm);
+ while (msgs.count() > 100)
+ msgs.pop_front();
+
+ /* Update last message with truncated version of the event */
+ if (strncmp(pos, "CTRL-", 5) == 0) {
+ pos2 = strchr(pos, str_match(pos, WPA_CTRL_REQ) ? ':' : ' ');
+ if (pos2)
+ pos2++;
+ else
+ pos2 = pos;
+ } else
+ pos2 = pos;
+ QString lastmsg = pos2;
+ lastmsg.truncate(40);
+ textLastMessage->setText(lastmsg);
+
+ pingsToStatusUpdate = 0;
+ networkMayHaveChanged = true;
+
+ if (str_match(pos, WPA_CTRL_REQ))
+ processCtrlReq(pos + strlen(WPA_CTRL_REQ));
+ else if (str_match(pos, WPA_EVENT_SCAN_RESULTS) && scanres)
+ scanres->updateResults();
+ else if (str_match(pos, WPA_EVENT_DISCONNECTED))
+ showTrayMessage(QSystemTrayIcon::Information, 3,
+ tr("Disconnected from network."));
+ else if (str_match(pos, WPA_EVENT_CONNECTED)) {
+ showTrayMessage(QSystemTrayIcon::Information, 3,
+ tr("Connection to network established."));
+ QTimer::singleShot(5 * 1000, this, SLOT(showTrayStatus()));
+ stopWpsRun(true);
+ } else if (str_match(pos, WPS_EVENT_AP_AVAILABLE_PBC)) {
+ wpsStatusText->setText(tr("WPS AP in active PBC mode found"));
+ if (textStatus->text() == "INACTIVE" ||
+ textStatus->text() == "DISCONNECTED")
+ wpaguiTab->setCurrentWidget(wpsTab);
+ wpsInstructions->setText(tr("Press the PBC button on the "
+ "screen to start registration"));
+ } else if (str_match(pos, WPS_EVENT_AP_AVAILABLE_PIN)) {
+ wpsStatusText->setText(tr("WPS AP with recently selected "
+ "registrar"));
+ if (textStatus->text() == "INACTIVE" ||
+ textStatus->text() == "DISCONNECTED")
+ wpaguiTab->setCurrentWidget(wpsTab);
+ } else if (str_match(pos, WPS_EVENT_AP_AVAILABLE_AUTH)) {
+ showTrayMessage(QSystemTrayIcon::Information, 3,
+ "Wi-Fi Protected Setup (WPS) AP\n"
+ "indicating this client is authorized.");
+ wpsStatusText->setText("WPS AP indicating this client is "
+ "authorized");
+ if (textStatus->text() == "INACTIVE" ||
+ textStatus->text() == "DISCONNECTED")
+ wpaguiTab->setCurrentWidget(wpsTab);
+ } else if (str_match(pos, WPS_EVENT_AP_AVAILABLE)) {
+ wpsStatusText->setText(tr("WPS AP detected"));
+ } else if (str_match(pos, WPS_EVENT_OVERLAP)) {
+ wpsStatusText->setText(tr("PBC mode overlap detected"));
+ wpsInstructions->setText(tr("More than one AP is currently in "
+ "active WPS PBC mode. Wait couple "
+ "of minutes and try again"));
+ wpaguiTab->setCurrentWidget(wpsTab);
+ } else if (str_match(pos, WPS_EVENT_CRED_RECEIVED)) {
+ wpsStatusText->setText(tr("Network configuration received"));
+ wpaguiTab->setCurrentWidget(wpsTab);
+ } else if (str_match(pos, WPA_EVENT_EAP_METHOD)) {
+ if (strstr(pos, "(WSC)"))
+ wpsStatusText->setText(tr("Registration started"));
+ } else if (str_match(pos, WPS_EVENT_M2D)) {
+ wpsStatusText->setText(tr("Registrar does not yet know PIN"));
+ } else if (str_match(pos, WPS_EVENT_FAIL)) {
+ wpsStatusText->setText(tr("Registration failed"));
+ } else if (str_match(pos, WPS_EVENT_SUCCESS)) {
+ wpsStatusText->setText(tr("Registration succeeded"));
+ }
+}
+
+
+void WpaGui::processCtrlReq(const char *req)
+{
+ if (udr) {
+ udr->close();
+ delete udr;
+ }
+ udr = new UserDataRequest();
+ if (udr == NULL)
+ return;
+ if (udr->setParams(this, req) < 0) {
+ delete udr;
+ udr = NULL;
+ return;
+ }
+ udr->show();
+ udr->exec();
+}
+
+
+void WpaGui::receiveMsgs()
+{
+ char buf[256];
+ size_t len;
+
+ while (monitor_conn && wpa_ctrl_pending(monitor_conn) > 0) {
+ len = sizeof(buf) - 1;
+ if (wpa_ctrl_recv(monitor_conn, buf, &len) == 0) {
+ buf[len] = '\0';
+ processMsg(buf);
+ }
+ }
+}
+
+
+void WpaGui::connectB()
+{
+ char reply[10];
+ size_t reply_len = sizeof(reply);
+ ctrlRequest("REASSOCIATE", reply, &reply_len);
+}
+
+
+void WpaGui::selectNetwork( const QString &sel )
+{
+ QString cmd(sel);
+ char reply[10];
+ size_t reply_len = sizeof(reply);
+
+ if (cmd.contains(QRegExp("^\\d+:")))
+ cmd.truncate(cmd.indexOf(':'));
+ else
+ cmd = "any";
+ cmd.prepend("SELECT_NETWORK ");
+ ctrlRequest(cmd.toLocal8Bit().constData(), reply, &reply_len);
+ triggerUpdate();
+ stopWpsRun(false);
+}
+
+
+void WpaGui::enableNetwork(const QString &sel)
+{
+ QString cmd(sel);
+ char reply[10];
+ size_t reply_len = sizeof(reply);
+
+ if (cmd.contains(QRegExp("^\\d+:")))
+ cmd.truncate(cmd.indexOf(':'));
+ else if (!cmd.startsWith("all")) {
+ debug("Invalid editNetwork '%s'",
+ cmd.toLocal8Bit().constData());
+ return;
+ }
+ cmd.prepend("ENABLE_NETWORK ");
+ ctrlRequest(cmd.toLocal8Bit().constData(), reply, &reply_len);
+ triggerUpdate();
+}
+
+
+void WpaGui::disableNetwork(const QString &sel)
+{
+ QString cmd(sel);
+ char reply[10];
+ size_t reply_len = sizeof(reply);
+
+ if (cmd.contains(QRegExp("^\\d+:")))
+ cmd.truncate(cmd.indexOf(':'));
+ else if (!cmd.startsWith("all")) {
+ debug("Invalid editNetwork '%s'",
+ cmd.toLocal8Bit().constData());
+ return;
+ }
+ cmd.prepend("DISABLE_NETWORK ");
+ ctrlRequest(cmd.toLocal8Bit().constData(), reply, &reply_len);
+ triggerUpdate();
+}
+
+
+void WpaGui::editNetwork(const QString &sel)
+{
+ QString cmd(sel);
+ int id = -1;
+
+ if (cmd.contains(QRegExp("^\\d+:"))) {
+ cmd.truncate(cmd.indexOf(':'));
+ id = cmd.toInt();
+ }
+
+ NetworkConfig *nc = new NetworkConfig();
+ if (nc == NULL)
+ return;
+ nc->setWpaGui(this);
+
+ if (id >= 0)
+ nc->paramsFromConfig(id);
+ else
+ nc->newNetwork();
+
+ nc->show();
+ nc->exec();
+}
+
+
+void WpaGui::editSelectedNetwork()
+{
+ if (networkSelect->count() < 1) {
+ QMessageBox::information(
+ this, tr("No Networks"),
+ tr("There are no networks to edit.\n"));
+ return;
+ }
+ QString sel(networkSelect->currentText());
+ editNetwork(sel);
+}
+
+
+void WpaGui::editListedNetwork()
+{
+ if (networkList->currentRow() < 0) {
+ QMessageBox::information(this, tr("Select A Network"),
+ tr("Select a network from the list to"
+ " edit it.\n"));
+ return;
+ }
+ QString sel(networkList->currentItem()->text());
+ editNetwork(sel);
+}
+
+
+void WpaGui::triggerUpdate()
+{
+ updateStatus();
+ networkMayHaveChanged = true;
+ updateNetworks();
+}
+
+
+void WpaGui::addNetwork()
+{
+ NetworkConfig *nc = new NetworkConfig();
+ if (nc == NULL)
+ return;
+ nc->setWpaGui(this);
+ nc->newNetwork();
+ nc->show();
+ nc->exec();
+}
+
+
+void WpaGui::removeNetwork(const QString &sel)
+{
+ QString cmd(sel);
+ char reply[10];
+ size_t reply_len = sizeof(reply);
+
+ if (cmd.contains(QRegExp("^\\d+:")))
+ cmd.truncate(cmd.indexOf(':'));
+ else if (!cmd.startsWith("all")) {
+ debug("Invalid editNetwork '%s'",
+ cmd.toLocal8Bit().constData());
+ return;
+ }
+ cmd.prepend("REMOVE_NETWORK ");
+ ctrlRequest(cmd.toLocal8Bit().constData(), reply, &reply_len);
+ triggerUpdate();
+}
+
+
+void WpaGui::removeSelectedNetwork()
+{
+ if (networkSelect->count() < 1) {
+ QMessageBox::information(this, tr("No Networks"),
+ tr("There are no networks to remove."
+ "\n"));
+ return;
+ }
+ QString sel(networkSelect->currentText());
+ removeNetwork(sel);
+}
+
+
+void WpaGui::removeListedNetwork()
+{
+ if (networkList->currentRow() < 0) {
+ QMessageBox::information(this, tr("Select A Network"),
+ tr("Select a network from the list "
+ "to remove it.\n"));
+ return;
+ }
+ QString sel(networkList->currentItem()->text());
+ removeNetwork(sel);
+}
+
+
+void WpaGui::enableAllNetworks()
+{
+ QString sel("all");
+ enableNetwork(sel);
+}
+
+
+void WpaGui::disableAllNetworks()
+{
+ QString sel("all");
+ disableNetwork(sel);
+}
+
+
+void WpaGui::removeAllNetworks()
+{
+ QString sel("all");
+ removeNetwork(sel);
+}
+
+
+int WpaGui::getNetworkDisabled(const QString &sel)
+{
+ QString cmd(sel);
+ char reply[10];
+ size_t reply_len = sizeof(reply) - 1;
+ int pos = cmd.indexOf(':');
+ if (pos < 0) {
+ debug("Invalid getNetworkDisabled '%s'",
+ cmd.toLocal8Bit().constData());
+ return -1;
+ }
+ cmd.truncate(pos);
+ cmd.prepend("GET_NETWORK ");
+ cmd.append(" disabled");
+
+ if (ctrlRequest(cmd.toLocal8Bit().constData(), reply, &reply_len) >= 0
+ && reply_len >= 1) {
+ reply[reply_len] = '\0';
+ if (!str_match(reply, "FAIL"))
+ return atoi(reply);
+ }
+
+ return -1;
+}
+
+
+void WpaGui::updateNetworkDisabledStatus()
+{
+ if (networkList->currentRow() < 0)
+ return;
+
+ QString sel(networkList->currentItem()->text());
+
+ switch (getNetworkDisabled(sel)) {
+ case 0:
+ if (!enableRadioButton->isChecked())
+ enableRadioButton->setChecked(true);
+ return;
+ case 1:
+ if (!disableRadioButton->isChecked())
+ disableRadioButton->setChecked(true);
+ return;
+ }
+}
+
+
+void WpaGui::enableListedNetwork(bool enabled)
+{
+ if (networkList->currentRow() < 0 || !enabled)
+ return;
+
+ QString sel(networkList->currentItem()->text());
+
+ if (getNetworkDisabled(sel) == 1)
+ enableNetwork(sel);
+}
+
+
+void WpaGui::disableListedNetwork(bool disabled)
+{
+ if (networkList->currentRow() < 0 || !disabled)
+ return;
+
+ QString sel(networkList->currentItem()->text());
+
+ if (getNetworkDisabled(sel) == 0)
+ disableNetwork(sel);
+}
+
+
+void WpaGui::saveConfig()
+{
+ char buf[10];
+ size_t len;
+
+ len = sizeof(buf) - 1;
+ ctrlRequest("SAVE_CONFIG", buf, &len);
+
+ buf[len] = '\0';
+
+ if (str_match(buf, "FAIL"))
+ QMessageBox::warning(
+ this, tr("Failed to save configuration"),
+ tr("The configuration could not be saved.\n"
+ "\n"
+ "The update_config=1 configuration option\n"
+ "must be used for configuration saving to\n"
+ "be permitted.\n"));
+ else
+ QMessageBox::information(
+ this, tr("Saved configuration"),
+ tr("The current configuration was saved."
+ "\n"));
+}
+
+
+void WpaGui::selectAdapter( const QString & sel )
+{
+ if (openCtrlConnection(sel.toLocal8Bit().constData()) < 0)
+ debug("Failed to open control connection to "
+ "wpa_supplicant.");
+ updateStatus();
+ updateNetworks();
+}
+
+
+void WpaGui::createTrayIcon(bool trayOnly)
+{
+ QApplication::setQuitOnLastWindowClosed(false);
+
+ tray_icon = new QSystemTrayIcon(this);
+ updateTrayIcon(TrayIconOffline);
+
+ connect(tray_icon,
+ SIGNAL(activated(QSystemTrayIcon::ActivationReason)),
+ this, SLOT(trayActivated(QSystemTrayIcon::ActivationReason)));
+
+ ackTrayIcon = false;
+
+ tray_menu = new QMenu(this);
+
+ disconnectAction = new QAction(tr("&Disconnect"), this);
+ reconnectAction = new QAction(tr("Re&connect"), this);
+ connect(disconnectAction, SIGNAL(triggered()), this,
+ SLOT(disconnect()));
+ connect(reconnectAction, SIGNAL(triggered()), this,
+ SLOT(connectB()));
+ tray_menu->addAction(disconnectAction);
+ tray_menu->addAction(reconnectAction);
+ tray_menu->addSeparator();
+
+ eventAction = new QAction(tr("&Event History"), this);
+ scanAction = new QAction(tr("Scan &Results"), this);
+ statAction = new QAction(tr("S&tatus"), this);
+ connect(eventAction, SIGNAL(triggered()), this, SLOT(eventHistory()));
+ connect(scanAction, SIGNAL(triggered()), this, SLOT(scan()));
+ connect(statAction, SIGNAL(triggered()), this, SLOT(showTrayStatus()));
+ tray_menu->addAction(eventAction);
+ tray_menu->addAction(scanAction);
+ tray_menu->addAction(statAction);
+ tray_menu->addSeparator();
+
+ showAction = new QAction(tr("&Show Window"), this);
+ hideAction = new QAction(tr("&Hide Window"), this);
+ quitAction = new QAction(tr("&Quit"), this);
+ connect(showAction, SIGNAL(triggered()), this, SLOT(show()));
+ connect(hideAction, SIGNAL(triggered()), this, SLOT(hide()));
+ connect(quitAction, SIGNAL(triggered()), qApp, SLOT(quit()));
+ tray_menu->addAction(showAction);
+ tray_menu->addAction(hideAction);
+ tray_menu->addSeparator();
+ tray_menu->addAction(quitAction);
+
+ tray_icon->setContextMenu(tray_menu);
+
+ tray_icon->show();
+
+ if (!trayOnly)
+ show();
+ inTray = trayOnly;
+}
+
+
+void WpaGui::showTrayMessage(QSystemTrayIcon::MessageIcon type, int sec,
+ const QString & msg)
+{
+ if (!QSystemTrayIcon::supportsMessages())
+ return;
+
+ if (isVisible() || !tray_icon || !tray_icon->isVisible() || quietMode)
+ return;
+
+ tray_icon->showMessage(qAppName(), msg, type, sec * 1000);
+}
+
+
+void WpaGui::trayActivated(QSystemTrayIcon::ActivationReason how)
+ {
+ switch (how) {
+ /* use close() here instead of hide() and allow the
+ * custom closeEvent handler take care of children */
+ case QSystemTrayIcon::Trigger:
+ ackTrayIcon = true;
+ if (isVisible()) {
+ close();
+ inTray = true;
+ } else {
+ show();
+ inTray = false;
+ }
+ break;
+ case QSystemTrayIcon::MiddleClick:
+ showTrayStatus();
+ break;
+ default:
+ break;
+ }
+}
+
+
+void WpaGui::showTrayStatus()
+{
+ char buf[2048];
+ size_t len;
+
+ len = sizeof(buf) - 1;
+ if (ctrlRequest("STATUS", buf, &len) < 0)
+ return;
+ buf[len] = '\0';
+
+ QString msg, status(buf);
+
+ QStringList lines = status.split(QRegExp("\\n"));
+ for (QStringList::Iterator it = lines.begin();
+ it != lines.end(); it++) {
+ int pos = (*it).indexOf('=') + 1;
+ if (pos < 1)
+ continue;
+
+ if ((*it).startsWith("bssid="))
+ msg.append("BSSID:\t" + (*it).mid(pos) + "\n");
+ else if ((*it).startsWith("ssid="))
+ msg.append("SSID: \t" + (*it).mid(pos) + "\n");
+ else if ((*it).startsWith("pairwise_cipher="))
+ msg.append("PAIR: \t" + (*it).mid(pos) + "\n");
+ else if ((*it).startsWith("group_cipher="))
+ msg.append("GROUP:\t" + (*it).mid(pos) + "\n");
+ else if ((*it).startsWith("key_mgmt="))
+ msg.append("AUTH: \t" + (*it).mid(pos) + "\n");
+ else if ((*it).startsWith("wpa_state="))
+ msg.append("STATE:\t" + (*it).mid(pos) + "\n");
+ else if ((*it).startsWith("ip_address="))
+ msg.append("IP: \t" + (*it).mid(pos) + "\n");
+ else if ((*it).startsWith("Supplicant PAE state="))
+ msg.append("PAE: \t" + (*it).mid(pos) + "\n");
+ else if ((*it).startsWith("EAP state="))
+ msg.append("EAP: \t" + (*it).mid(pos) + "\n");
+ }
+
+ if (!msg.isEmpty())
+ showTrayMessage(QSystemTrayIcon::Information, 10, msg);
+}
+
+
+void WpaGui::updateTrayToolTip(const QString &msg)
+{
+ if (tray_icon)
+ tray_icon->setToolTip(msg);
+}
+
+
+void WpaGui::updateTrayIcon(TrayIconType type)
+{
+ if (!tray_icon || currentIconType == type)
+ return;
+
+ QIcon fallback_icon;
+ QStringList names;
+
+ if (QImageReader::supportedImageFormats().contains(QByteArray("svg")))
+ fallback_icon = QIcon(":/icons/wpa_gui.svg");
+ else
+ fallback_icon = QIcon(":/icons/wpa_gui.png");
+
+ switch (type) {
+ case TrayIconOffline:
+ names << "network-wireless-offline-symbolic"
+ << "network-wireless-offline"
+ << "network-wireless-signal-none-symbolic"
+ << "network-wireless-signal-none";
+ break;
+ case TrayIconAcquiring:
+ names << "network-wireless-acquiring-symbolic"
+ << "network-wireless-acquiring";
+ break;
+ case TrayIconConnected:
+ names << "network-wireless-connected-symbolic"
+ << "network-wireless-connected";
+ break;
+ case TrayIconSignalNone:
+ names << "network-wireless-signal-none-symbolic"
+ << "network-wireless-signal-none";
+ break;
+ case TrayIconSignalWeak:
+ names << "network-wireless-signal-weak-symbolic"
+ << "network-wireless-signal-weak";
+ break;
+ case TrayIconSignalOk:
+ names << "network-wireless-signal-ok-symbolic"
+ << "network-wireless-signal-ok";
+ break;
+ case TrayIconSignalGood:
+ names << "network-wireless-signal-good-symbolic"
+ << "network-wireless-signal-good";
+ break;
+ case TrayIconSignalExcellent:
+ names << "network-wireless-signal-excellent-symbolic"
+ << "network-wireless-signal-excellent";
+ break;
+ }
+
+ currentIconType = type;
+ tray_icon->setIcon(loadThemedIcon(names, fallback_icon));
+}
+
+
+QIcon WpaGui::loadThemedIcon(const QStringList &names,
+ const QIcon &fallback)
+{
+ QIcon icon;
+
+ for (QStringList::ConstIterator it = names.begin();
+ it != names.end(); it++) {
+ icon = QIcon::fromTheme(*it);
+ if (!icon.isNull())
+ return icon;
+ }
+
+ return fallback;
+}
+
+
+void WpaGui::closeEvent(QCloseEvent *event)
+{
+ if (eh) {
+ eh->close();
+ delete eh;
+ eh = NULL;
+ }
+
+ if (scanres) {
+ scanres->close();
+ delete scanres;
+ scanres = NULL;
+ }
+
+ if (peers) {
+ peers->close();
+ delete peers;
+ peers = NULL;
+ }
+
+ if (udr) {
+ udr->close();
+ delete udr;
+ udr = NULL;
+ }
+
+ if (tray_icon && !ackTrayIcon) {
+ /* give user a visual hint that the tray icon exists */
+ if (QSystemTrayIcon::supportsMessages()) {
+ hide();
+ showTrayMessage(QSystemTrayIcon::Information, 3,
+ qAppName() +
+ tr(" will keep running in "
+ "the system tray."));
+ } else {
+ QMessageBox::information(this, qAppName() +
+ tr(" systray"),
+ tr("The program will keep "
+ "running in the system "
+ "tray."));
+ }
+ ackTrayIcon = true;
+ }
+
+ event->accept();
+}
+
+
+void WpaGui::wpsDialog()
+{
+ wpaguiTab->setCurrentWidget(wpsTab);
+}
+
+
+void WpaGui::peersDialog()
+{
+ if (peers) {
+ peers->close();
+ delete peers;
+ }
+
+ peers = new Peers();
+ if (peers == NULL)
+ return;
+ peers->setWpaGui(this);
+ peers->show();
+ peers->exec();
+}
+
+
+void WpaGui::tabChanged(int index)
+{
+ if (index != 2)
+ return;
+
+ if (wpsRunning)
+ return;
+
+ wpsApPinEdit->setEnabled(!bssFromScan.isEmpty());
+ if (bssFromScan.isEmpty())
+ wpsApPinButton->setEnabled(false);
+}
+
+
+void WpaGui::wpsPbc()
+{
+ char reply[20];
+ size_t reply_len = sizeof(reply);
+
+ if (ctrlRequest("WPS_PBC", reply, &reply_len) < 0)
+ return;
+
+ wpsPinEdit->setEnabled(false);
+ if (wpsStatusText->text().compare(tr("WPS AP in active PBC mode found"))) {
+ wpsInstructions->setText(tr("Press the push button on the AP to "
+ "start the PBC mode."));
+ } else {
+ wpsInstructions->setText(tr("If you have not yet done so, press "
+ "the push button on the AP to start "
+ "the PBC mode."));
+ }
+ wpsStatusText->setText(tr("Waiting for Registrar"));
+ wpsRunning = true;
+}
+
+
+void WpaGui::wpsGeneratePin()
+{
+ char reply[20];
+ size_t reply_len = sizeof(reply) - 1;
+
+ if (ctrlRequest("WPS_PIN any", reply, &reply_len) < 0)
+ return;
+
+ reply[reply_len] = '\0';
+
+ wpsPinEdit->setText(reply);
+ wpsPinEdit->setEnabled(true);
+ wpsInstructions->setText(tr("Enter the generated PIN into the Registrar "
+ "(either the internal one in the AP or an "
+ "external one)."));
+ wpsStatusText->setText(tr("Waiting for Registrar"));
+ wpsRunning = true;
+}
+
+
+void WpaGui::setBssFromScan(const QString &bssid)
+{
+ bssFromScan = bssid;
+ wpsApPinEdit->setEnabled(!bssFromScan.isEmpty());
+ wpsApPinButton->setEnabled(wpsApPinEdit->text().length() == 8);
+ wpsStatusText->setText(tr("WPS AP selected from scan results"));
+ wpsInstructions->setText(tr("If you want to use an AP device PIN, e.g., "
+ "from a label in the device, enter the eight "
+ "digit AP PIN and click Use AP PIN button."));
+}
+
+
+void WpaGui::wpsApPinChanged(const QString &text)
+{
+ wpsApPinButton->setEnabled(text.length() == 8);
+}
+
+
+void WpaGui::wpsApPin()
+{
+ char reply[20];
+ size_t reply_len = sizeof(reply);
+
+ QString cmd("WPS_REG " + bssFromScan + " " + wpsApPinEdit->text());
+ if (ctrlRequest(cmd.toLocal8Bit().constData(), reply, &reply_len) < 0)
+ return;
+
+ wpsStatusText->setText(tr("Waiting for AP/Enrollee"));
+ wpsRunning = true;
+}
+
+
+void WpaGui::stopWpsRun(bool success)
+{
+ if (wpsRunning)
+ wpsStatusText->setText(success ? tr("Connected to the network") :
+ tr("Stopped"));
+ else
+ wpsStatusText->setText("");
+ wpsPinEdit->setEnabled(false);
+ wpsInstructions->setText("");
+ wpsRunning = false;
+ bssFromScan = "";
+ wpsApPinEdit->setEnabled(false);
+ wpsApPinButton->setEnabled(false);
+}
+
+
+#ifdef CONFIG_NATIVE_WINDOWS
+
+#ifndef WPASVC_NAME
+#define WPASVC_NAME TEXT("wpasvc")
+#endif
+
+class ErrorMsg : public QMessageBox {
+public:
+ ErrorMsg(QWidget *parent, DWORD last_err = GetLastError());
+ void showMsg(QString msg);
+private:
+ DWORD err;
+};
+
+ErrorMsg::ErrorMsg(QWidget *parent, DWORD last_err) :
+ QMessageBox(parent), err(last_err)
+{
+ setWindowTitle(tr("wpa_gui error"));
+ setIcon(QMessageBox::Warning);
+}
+
+void ErrorMsg::showMsg(QString msg)
+{
+ LPTSTR buf;
+
+ setText(msg);
+ if (FormatMessage(FORMAT_MESSAGE_ALLOCATE_BUFFER |
+ FORMAT_MESSAGE_FROM_SYSTEM,
+ NULL, err, 0, (LPTSTR) (void *) &buf,
+ 0, NULL) > 0) {
+ QString msg = QString::fromWCharArray(buf);
+ setInformativeText(QString("[%1] %2").arg(err).arg(msg));
+ LocalFree(buf);
+ } else {
+ setInformativeText(QString("[%1]").arg(err));
+ }
+
+ exec();
+}
+
+
+void WpaGui::startService()
+{
+ SC_HANDLE svc, scm;
+
+ scm = OpenSCManager(0, 0, SC_MANAGER_CONNECT);
+ if (!scm) {
+ ErrorMsg(this).showMsg(tr("OpenSCManager failed"));
+ return;
+ }
+
+ svc = OpenService(scm, WPASVC_NAME, SERVICE_START);
+ if (!svc) {
+ ErrorMsg(this).showMsg(tr("OpenService failed"));
+ CloseServiceHandle(scm);
+ return;
+ }
+
+ if (!StartService(svc, 0, NULL)) {
+ ErrorMsg(this).showMsg(tr("Failed to start wpa_supplicant "
+ "service"));
+ }
+
+ CloseServiceHandle(svc);
+ CloseServiceHandle(scm);
+}
+
+
+void WpaGui::stopService()
+{
+ SC_HANDLE svc, scm;
+ SERVICE_STATUS status;
+
+ scm = OpenSCManager(0, 0, SC_MANAGER_CONNECT);
+ if (!scm) {
+ ErrorMsg(this).showMsg(tr("OpenSCManager failed"));
+ return;
+ }
+
+ svc = OpenService(scm, WPASVC_NAME, SERVICE_STOP);
+ if (!svc) {
+ ErrorMsg(this).showMsg(tr("OpenService failed"));
+ CloseServiceHandle(scm);
+ return;
+ }
+
+ if (!ControlService(svc, SERVICE_CONTROL_STOP, &status)) {
+ ErrorMsg(this).showMsg(tr("Failed to stop wpa_supplicant "
+ "service"));
+ }
+
+ CloseServiceHandle(svc);
+ CloseServiceHandle(scm);
+}
+
+
+bool WpaGui::serviceRunning()
+{
+ SC_HANDLE svc, scm;
+ SERVICE_STATUS status;
+ bool running = false;
+
+ scm = OpenSCManager(0, 0, SC_MANAGER_CONNECT);
+ if (!scm) {
+ debug("OpenSCManager failed: %d", (int) GetLastError());
+ return false;
+ }
+
+ svc = OpenService(scm, WPASVC_NAME, SERVICE_QUERY_STATUS);
+ if (!svc) {
+ debug("OpenService failed: %d", (int) GetLastError());
+ CloseServiceHandle(scm);
+ return false;
+ }
+
+ if (QueryServiceStatus(svc, &status)) {
+ if (status.dwCurrentState != SERVICE_STOPPED)
+ running = true;
+ }
+
+ CloseServiceHandle(svc);
+ CloseServiceHandle(scm);
+
+ return running;
+}
+
+#endif /* CONFIG_NATIVE_WINDOWS */
+
+
+void WpaGui::addInterface()
+{
+ if (add_iface) {
+ add_iface->close();
+ delete add_iface;
+ }
+ add_iface = new AddInterface(this, this);
+ add_iface->show();
+ add_iface->exec();
+}
+
+
+#ifndef QT_NO_SESSIONMANAGER
+void WpaGui::saveState()
+{
+ QSettings settings("wpa_supplicant", "wpa_gui");
+ settings.beginGroup("state");
+ settings.setValue("session_id", app->sessionId());
+ settings.setValue("in_tray", inTray);
+ settings.endGroup();
+}
+#endif
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpagui.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpagui.h
new file mode 100755
index 0000000..f0a34c9
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpagui.h
@@ -0,0 +1,180 @@
+/*
+ * wpa_gui - WpaGui class
+ * Copyright (c) 2005-2006, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPAGUI_H
+#define WPAGUI_H
+
+#include <QSystemTrayIcon>
+#include <QObject>
+#include "ui_wpagui.h"
+#include "addinterface.h"
+
+class UserDataRequest;
+
+class WpaGuiApp : public QApplication
+{
+ Q_OBJECT
+public:
+ WpaGuiApp(int &argc, char **argv);
+
+#if !defined(QT_NO_SESSIONMANAGER) && QT_VERSION < 0x050000
+ virtual void saveState(QSessionManager &manager);
+#endif
+
+ WpaGui *w;
+ int argc;
+ char **argv;
+};
+
+class WpaGui : public QMainWindow, public Ui::WpaGui
+{
+ Q_OBJECT
+
+public:
+
+ enum TrayIconType {
+ TrayIconOffline = 0,
+ TrayIconAcquiring,
+ TrayIconConnected,
+ TrayIconSignalNone,
+ TrayIconSignalWeak,
+ TrayIconSignalOk,
+ TrayIconSignalGood,
+ TrayIconSignalExcellent,
+ };
+
+ WpaGui(QApplication *app, QWidget *parent = 0, const char *name = 0,
+ Qt::WindowFlags fl = 0);
+ ~WpaGui();
+
+ virtual int ctrlRequest(const char *cmd, char *buf, size_t *buflen);
+ virtual void triggerUpdate();
+ virtual void editNetwork(const QString &sel);
+ virtual void removeNetwork(const QString &sel);
+ virtual void enableNetwork(const QString &sel);
+ virtual void disableNetwork(const QString &sel);
+ virtual int getNetworkDisabled(const QString &sel);
+ void setBssFromScan(const QString &bssid);
+#ifndef QT_NO_SESSIONMANAGER
+ void saveState();
+#endif
+
+public slots:
+ virtual void parse_argv();
+ virtual void updateStatus();
+ virtual void updateNetworks();
+ virtual void helpIndex();
+ virtual void helpContents();
+ virtual void helpAbout();
+ virtual void disconnect();
+ virtual void scan();
+ virtual void eventHistory();
+ virtual void ping();
+ virtual void signalMeterUpdate();
+ virtual void processMsg(char *msg);
+ virtual void processCtrlReq(const char *req);
+ virtual void receiveMsgs();
+ virtual void connectB();
+ virtual void selectNetwork(const QString &sel);
+ virtual void editSelectedNetwork();
+ virtual void editListedNetwork();
+ virtual void removeSelectedNetwork();
+ virtual void removeListedNetwork();
+ virtual void addNetwork();
+ virtual void enableAllNetworks();
+ virtual void disableAllNetworks();
+ virtual void removeAllNetworks();
+ virtual void saveConfig();
+ virtual void selectAdapter(const QString &sel);
+ virtual void updateNetworkDisabledStatus();
+ virtual void enableListedNetwork(bool);
+ virtual void disableListedNetwork(bool);
+ virtual void showTrayMessage(QSystemTrayIcon::MessageIcon type,
+ int sec, const QString &msg);
+ virtual void showTrayStatus();
+ virtual void updateTrayIcon(TrayIconType type);
+ virtual void updateTrayToolTip(const QString &msg);
+ virtual QIcon loadThemedIcon(const QStringList &names,
+ const QIcon &fallback);
+ virtual void wpsDialog();
+ virtual void peersDialog();
+ virtual void tabChanged(int index);
+ virtual void wpsPbc();
+ virtual void wpsGeneratePin();
+ virtual void wpsApPinChanged(const QString &text);
+ virtual void wpsApPin();
+#ifdef CONFIG_NATIVE_WINDOWS
+ virtual void startService();
+ virtual void stopService();
+#endif /* CONFIG_NATIVE_WINDOWS */
+ virtual void addInterface();
+
+protected slots:
+ virtual void languageChange();
+ virtual void trayActivated(QSystemTrayIcon::ActivationReason how);
+ virtual void closeEvent(QCloseEvent *event);
+
+private:
+ ScanResults *scanres;
+ Peers *peers;
+ bool networkMayHaveChanged;
+ char *ctrl_iface;
+ EventHistory *eh;
+ struct wpa_ctrl *ctrl_conn;
+ QSocketNotifier *msgNotifier;
+ QTimer *timer;
+ int pingsToStatusUpdate;
+ WpaMsgList msgs;
+ char *ctrl_iface_dir;
+ struct wpa_ctrl *monitor_conn;
+ UserDataRequest *udr;
+ QAction *disconnectAction;
+ QAction *reconnectAction;
+ QAction *eventAction;
+ QAction *scanAction;
+ QAction *statAction;
+ QAction *showAction;
+ QAction *hideAction;
+ QAction *quitAction;
+ QMenu *tray_menu;
+ QSystemTrayIcon *tray_icon;
+ TrayIconType currentIconType;
+ QString wpaStateTranslate(char *state);
+ void createTrayIcon(bool);
+ bool ackTrayIcon;
+ bool startInTray;
+ bool quietMode;
+
+ int openCtrlConnection(const char *ifname);
+
+ bool wpsRunning;
+
+ QString bssFromScan;
+
+ void stopWpsRun(bool success);
+
+ QTimer *signalMeterTimer;
+ int signalMeterInterval;
+
+#ifdef CONFIG_NATIVE_WINDOWS
+ QAction *fileStartServiceAction;
+ QAction *fileStopServiceAction;
+
+ bool serviceRunning();
+#endif /* CONFIG_NATIVE_WINDOWS */
+
+ QAction *addInterfaceAction;
+ AddInterface *add_iface;
+
+ bool connectedToService;
+
+ QApplication *app;
+ bool inTray;
+};
+
+#endif /* WPAGUI_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpagui.ui b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpagui.ui
new file mode 100755
index 0000000..9f9039f
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpagui.ui
@@ -0,0 +1,524 @@
+<ui version="4.0" >
+ <class>WpaGui</class>
+ <widget class="QMainWindow" name="WpaGui" >
+ <property name="geometry" >
+ <rect>
+ <x>0</x>
+ <y>0</y>
+ <width>345</width>
+ <height>330</height>
+ </rect>
+ </property>
+ <property name="windowTitle" >
+ <string>wpa_gui</string>
+ </property>
+ <property name="windowIcon" >
+ <iconset resource="icons.qrc" >
+ <normaloff>:/icons/wpa_gui.svg</normaloff>:/icons/wpa_gui.svg</iconset>
+ </property>
+ <widget class="QWidget" name="widget" >
+ <layout class="QGridLayout" >
+ <item row="0" column="0" >
+ <widget class="QLabel" name="adapterLabel" >
+ <property name="text" >
+ <string>Adapter:</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="1" >
+ <widget class="QComboBox" name="adapterSelect" />
+ </item>
+ <item row="1" column="0" >
+ <widget class="QLabel" name="networkLabel" >
+ <property name="text" >
+ <string>Network:</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QComboBox" name="networkSelect" />
+ </item>
+ <item row="2" column="0" colspan="2" >
+ <widget class="QTabWidget" name="wpaguiTab" >
+ <property name="currentIndex" >
+ <number>0</number>
+ </property>
+ <widget class="QWidget" name="statusTab" >
+ <attribute name="title" >
+ <string>Current Status</string>
+ </attribute>
+ <layout class="QGridLayout" >
+ <item row="0" column="0" colspan="5" >
+ <widget class="QFrame" name="frame3" >
+ <property name="frameShape" >
+ <enum>QFrame::NoFrame</enum>
+ </property>
+ <property name="frameShadow" >
+ <enum>QFrame::Plain</enum>
+ </property>
+ <layout class="QGridLayout" >
+ <item row="0" column="0" >
+ <widget class="QLabel" name="statusLabel" >
+ <property name="text" >
+ <string>Status:</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="0" >
+ <widget class="QLabel" name="lastMessageLabel" >
+ <property name="text" >
+ <string>Last message:</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="0" >
+ <widget class="QLabel" name="authenticationLabel" >
+ <property name="text" >
+ <string>Authentication:</string>
+ </property>
+ </widget>
+ </item>
+ <item row="3" column="0" >
+ <widget class="QLabel" name="encryptionLabel" >
+ <property name="text" >
+ <string>Encryption:</string>
+ </property>
+ </widget>
+ </item>
+ <item row="4" column="0" >
+ <widget class="QLabel" name="ssidLabel" >
+ <property name="text" >
+ <string>SSID:</string>
+ </property>
+ </widget>
+ </item>
+ <item row="5" column="0" >
+ <widget class="QLabel" name="bssidLabel" >
+ <property name="text" >
+ <string>BSSID:</string>
+ </property>
+ </widget>
+ </item>
+ <item row="6" column="0" >
+ <widget class="QLabel" name="ipAddressLabel" >
+ <property name="text" >
+ <string>IP address:</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="1" >
+ <widget class="QLabel" name="textStatus" >
+ <property name="text" >
+ <string/>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1" colspan="3" >
+ <widget class="QLabel" name="textLastMessage" >
+ <property name="text" >
+ <string/>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="1" >
+ <widget class="QLabel" name="textAuthentication" >
+ <property name="text" >
+ <string/>
+ </property>
+ </widget>
+ </item>
+ <item row="3" column="1" >
+ <widget class="QLabel" name="textEncryption" >
+ <property name="text" >
+ <string/>
+ </property>
+ </widget>
+ </item>
+ <item row="4" column="1" >
+ <widget class="QLabel" name="textSsid" >
+ <property name="text" >
+ <string/>
+ </property>
+ </widget>
+ </item>
+ <item row="5" column="1" >
+ <widget class="QLabel" name="textBssid" >
+ <property name="text" >
+ <string/>
+ </property>
+ </widget>
+ </item>
+ <item row="6" column="1" >
+ <widget class="QLabel" name="textIpAddress" >
+ <property name="text" >
+ <string/>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ </item>
+ <item row="1" column="0" >
+ <spacer>
+ <property name="orientation" >
+ <enum>Qt::Vertical</enum>
+ </property>
+ <property name="sizeHint" >
+ <size>
+ <width>20</width>
+ <height>40</height>
+ </size>
+ </property>
+ </spacer>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QPushButton" name="connectButton" >
+ <property name="text" >
+ <string>Connect</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="2" >
+ <widget class="QPushButton" name="disconnectButton" >
+ <property name="text" >
+ <string>Disconnect</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="3" >
+ <widget class="QPushButton" name="scanButton" >
+ <property name="text" >
+ <string>Scan</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="4" >
+ <spacer>
+ <property name="orientation" >
+ <enum>Qt::Vertical</enum>
+ </property>
+ <property name="sizeHint" >
+ <size>
+ <width>20</width>
+ <height>40</height>
+ </size>
+ </property>
+ </spacer>
+ </item>
+ </layout>
+ </widget>
+ <widget class="QWidget" name="networkconfigTab" >
+ <attribute name="title" >
+ <string>Manage Networks</string>
+ </attribute>
+ <layout class="QGridLayout" >
+ <item row="0" column="0" colspan="5" >
+ <widget class="QListWidget" name="networkList" >
+ <property name="selectionRectVisible" >
+ <bool>true</bool>
+ </property>
+ </widget>
+ </item>
+ <item rowspan="2" row="1" column="0" >
+ <spacer>
+ <property name="orientation" >
+ <enum>Qt::Vertical</enum>
+ </property>
+ <property name="sizeHint" >
+ <size>
+ <width>20</width>
+ <height>61</height>
+ </size>
+ </property>
+ </spacer>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QRadioButton" name="enableRadioButton" >
+ <property name="text" >
+ <string>Enabled</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="2" >
+ <widget class="QPushButton" name="editNetworkButton" >
+ <property name="text" >
+ <string>Edit</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="3" >
+ <widget class="QPushButton" name="removeNetworkButton" >
+ <property name="text" >
+ <string>Remove</string>
+ </property>
+ </widget>
+ </item>
+ <item rowspan="2" row="1" column="4" >
+ <spacer>
+ <property name="orientation" >
+ <enum>Qt::Vertical</enum>
+ </property>
+ <property name="sizeHint" >
+ <size>
+ <width>20</width>
+ <height>61</height>
+ </size>
+ </property>
+ </spacer>
+ </item>
+ <item row="2" column="1" >
+ <widget class="QRadioButton" name="disableRadioButton" >
+ <property name="text" >
+ <string>Disabled</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="2" >
+ <widget class="QPushButton" name="addNetworkButton" >
+ <property name="text" >
+ <string>Add</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="3" >
+ <widget class="QPushButton" name="scanNetworkButton" >
+ <property name="text" >
+ <string>Scan</string>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ <widget class="QWidget" name="wpsTab" >
+ <attribute name="title" >
+ <string>WPS</string>
+ </attribute>
+ <layout class="QGridLayout" name="wpsGridLayout" >
+ <item row="0" column="0" >
+ <widget class="QLabel" name="label_2" >
+ <property name="text" >
+ <string>Status:</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="1" colspan="3" >
+ <widget class="QLabel" name="wpsStatusText" >
+ <property name="text" >
+ <string/>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="0" colspan="2" >
+ <widget class="QPushButton" name="wpsPbcButton" >
+ <property name="text" >
+ <string>PBC - push button</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="0" colspan="2" >
+ <widget class="QPushButton" name="wpsPinButton" >
+ <property name="text" >
+ <string>Generate PIN</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="2" >
+ <widget class="QLabel" name="label" >
+ <property name="text" >
+ <string>PIN:</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="3" >
+ <widget class="QLineEdit" name="wpsPinEdit" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ <property name="readOnly" >
+ <bool>true</bool>
+ </property>
+ </widget>
+ </item>
+ <item row="3" column="0" colspan="2" >
+ <widget class="QPushButton" name="wpsApPinButton" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ <property name="text" >
+ <string>Use AP PIN</string>
+ </property>
+ </widget>
+ </item>
+ <item row="3" column="2" >
+ <widget class="QLabel" name="label_3" >
+ <property name="text" >
+ <string>AP PIN:</string>
+ </property>
+ </widget>
+ </item>
+ <item row="3" column="3" >
+ <widget class="QLineEdit" name="wpsApPinEdit" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ </widget>
+ </item>
+ <item row="4" column="0" colspan="4" >
+ <widget class="QTextEdit" name="wpsInstructions" >
+ <property name="readOnly" >
+ <bool>true</bool>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ <widget class="QMenuBar" name="MenuBar" >
+ <property name="geometry" >
+ <rect>
+ <x>0</x>
+ <y>0</y>
+ <width>345</width>
+ <height>24</height>
+ </rect>
+ </property>
+ <widget class="QMenu" name="fileMenu" >
+ <property name="title" >
+ <string>&File</string>
+ </property>
+ <addaction name="fileEventHistoryAction" />
+ <addaction name="fileSaveConfigAction" />
+ <addaction name="actionWPS" />
+ <addaction name="actionPeers" />
+ <addaction name="separator" />
+ <addaction name="fileExitAction" />
+ </widget>
+ <widget class="QMenu" name="networkMenu" >
+ <property name="title" >
+ <string>&Network</string>
+ </property>
+ <addaction name="networkAddAction" />
+ <addaction name="networkEditAction" />
+ <addaction name="networkRemoveAction" />
+ <addaction name="separator" />
+ <addaction name="networkEnableAllAction" />
+ <addaction name="networkDisableAllAction" />
+ <addaction name="networkRemoveAllAction" />
+ </widget>
+ <widget class="QMenu" name="helpMenu" >
+ <property name="title" >
+ <string>&Help</string>
+ </property>
+ <addaction name="helpContentsAction" />
+ <addaction name="helpIndexAction" />
+ <addaction name="separator" />
+ <addaction name="helpAboutAction" />
+ </widget>
+ <addaction name="fileMenu" />
+ <addaction name="networkMenu" />
+ <addaction name="helpMenu" />
+ </widget>
+ <action name="fileEventHistoryAction" >
+ <property name="text" >
+ <string>Event &History</string>
+ </property>
+ </action>
+ <action name="fileSaveConfigAction" >
+ <property name="text" >
+ <string>&Save Configuration</string>
+ </property>
+ <property name="shortcut" >
+ <string>Ctrl+S</string>
+ </property>
+ </action>
+ <action name="fileExitAction" >
+ <property name="text" >
+ <string>E&xit</string>
+ </property>
+ <property name="shortcut" >
+ <string>Ctrl+Q</string>
+ </property>
+ </action>
+ <action name="networkAddAction" >
+ <property name="text" >
+ <string>&Add</string>
+ </property>
+ </action>
+ <action name="networkEditAction" >
+ <property name="text" >
+ <string>&Edit</string>
+ </property>
+ </action>
+ <action name="networkRemoveAction" >
+ <property name="text" >
+ <string>&Remove</string>
+ </property>
+ </action>
+ <action name="networkEnableAllAction" >
+ <property name="text" >
+ <string>E&nable All</string>
+ </property>
+ </action>
+ <action name="networkDisableAllAction" >
+ <property name="text" >
+ <string>&Disable All</string>
+ </property>
+ </action>
+ <action name="networkRemoveAllAction" >
+ <property name="text" >
+ <string>Re&move All</string>
+ </property>
+ </action>
+ <action name="helpContentsAction" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ <property name="text" >
+ <string>&Contents...</string>
+ </property>
+ </action>
+ <action name="helpIndexAction" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ <property name="text" >
+ <string>&Index...</string>
+ </property>
+ </action>
+ <action name="helpAboutAction" >
+ <property name="text" >
+ <string>&About</string>
+ </property>
+ </action>
+ <action name="actionWPS" >
+ <property name="enabled" >
+ <bool>false</bool>
+ </property>
+ <property name="text" >
+ <string>&Wi-Fi Protected Setup</string>
+ </property>
+ </action>
+ <action name="actionPeers" >
+ <property name="text" >
+ <string>&Peers</string>
+ </property>
+ </action>
+ </widget>
+ <layoutdefault spacing="6" margin="11" />
+ <pixmapfunction></pixmapfunction>
+ <includes>
+ <include location="global" >qtimer.h</include>
+ <include location="global" >qsocketnotifier.h</include>
+ <include location="local" >wpamsg.h</include>
+ <include location="local" >eventhistory.h</include>
+ <include location="local" >scanresults.h</include>
+ <include location="local" >peers.h</include>
+ </includes>
+ <resources>
+ <include location="icons.qrc" />
+ </resources>
+ <connections/>
+</ui>
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpamsg.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpamsg.h
new file mode 100755
index 0000000..8f2fcdc
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_gui-qt4/wpamsg.h
@@ -0,0 +1,35 @@
+/*
+ * wpa_gui - WpaMsg class for storing event messages
+ * Copyright (c) 2005-2006, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPAMSG_H
+#define WPAMSG_H
+
+#include <QDateTime>
+#include <QLinkedList>
+
+class WpaMsg {
+public:
+ WpaMsg(const QString &_msg, int _priority = 2)
+ : msg(_msg), priority(_priority)
+ {
+ timestamp = QDateTime::currentDateTime();
+ }
+
+ QString getMsg() const { return msg; }
+ int getPriority() const { return priority; }
+ QDateTime getTimestamp() const { return timestamp; }
+
+private:
+ QString msg;
+ int priority;
+ QDateTime timestamp;
+};
+
+typedef QLinkedList<WpaMsg> WpaMsgList;
+
+#endif /* WPAMSG_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_supplicant.conf b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_supplicant.conf
new file mode 100755
index 0000000..6619d6b
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_supplicant.conf
@@ -0,0 +1,2071 @@
+##### Example wpa_supplicant configuration file ###############################
+#
+# This file describes configuration file format and lists all available option.
+# Please also take a look at simpler configuration examples in 'examples'
+# subdirectory.
+#
+# Empty lines and lines starting with # are ignored
+
+# NOTE! This file may contain password information and should probably be made
+# readable only by root user on multiuser systems.
+
+# Note: All file paths in this configuration file should use full (absolute,
+# not relative to working directory) path in order to allow working directory
+# to be changed. This can happen if wpa_supplicant is run in the background.
+
+# Whether to allow wpa_supplicant to update (overwrite) configuration
+#
+# This option can be used to allow wpa_supplicant to overwrite configuration
+# file whenever configuration is changed (e.g., new network block is added with
+# wpa_cli or wpa_gui, or a password is changed). This is required for
+# wpa_cli/wpa_gui to be able to store the configuration changes permanently.
+# Please note that overwriting configuration file will remove the comments from
+# it.
+#update_config=1
+
+# global configuration (shared by all network blocks)
+#
+# Parameters for the control interface. If this is specified, wpa_supplicant
+# will open a control interface that is available for external programs to
+# manage wpa_supplicant. The meaning of this string depends on which control
+# interface mechanism is used. For all cases, the existence of this parameter
+# in configuration is used to determine whether the control interface is
+# enabled.
+#
+# For UNIX domain sockets (default on Linux and BSD): This is a directory that
+# will be created for UNIX domain sockets for listening to requests from
+# external programs (CLI/GUI, etc.) for status information and configuration.
+# The socket file will be named based on the interface name, so multiple
+# wpa_supplicant processes can be run at the same time if more than one
+# interface is used.
+# /var/run/wpa_supplicant is the recommended directory for sockets and by
+# default, wpa_cli will use it when trying to connect with wpa_supplicant.
+#
+# Access control for the control interface can be configured by setting the
+# directory to allow only members of a group to use sockets. This way, it is
+# possible to run wpa_supplicant as root (since it needs to change network
+# configuration and open raw sockets) and still allow GUI/CLI components to be
+# run as non-root users. However, since the control interface can be used to
+# change the network configuration, this access needs to be protected in many
+# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you
+# want to allow non-root users to use the control interface, add a new group
+# and change this value to match with that group. Add users that should have
+# control interface access to this group. If this variable is commented out or
+# not included in the configuration file, group will not be changed from the
+# value it got by default when the directory or socket was created.
+#
+# When configuring both the directory and group, use following format:
+# DIR=/var/run/wpa_supplicant GROUP=wheel
+# DIR=/var/run/wpa_supplicant GROUP=0
+# (group can be either group name or gid)
+#
+# For UDP connections (default on Windows): The value will be ignored. This
+# variable is just used to select that the control interface is to be created.
+# The value can be set to, e.g., udp (ctrl_interface=udp)
+#
+# For Windows Named Pipe: This value can be used to set the security descriptor
+# for controlling access to the control interface. Security descriptor can be
+# set using Security Descriptor String Format (see http://msdn.microsoft.com/
+# library/default.asp?url=/library/en-us/secauthz/security/
+# security_descriptor_string_format.asp). The descriptor string needs to be
+# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty
+# DACL (which will reject all connections). See README-Windows.txt for more
+# information about SDDL string format.
+#
+ctrl_interface=/var/run/wpa_supplicant
+
+# IEEE 802.1X/EAPOL version
+# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines
+# EAPOL version 2. However, there are many APs that do not handle the new
+# version number correctly (they seem to drop the frames completely). In order
+# to make wpa_supplicant interoperate with these APs, the version number is set
+# to 1 by default. This configuration value can be used to set it to the new
+# version (2).
+# Note: When using MACsec, eapol_version shall be set to 3, which is
+# defined in IEEE Std 802.1X-2010.
+eapol_version=1
+
+# AP scanning/selection
+# By default, wpa_supplicant requests driver to perform AP scanning and then
+# uses the scan results to select a suitable AP. Another alternative is to
+# allow the driver to take care of AP scanning and selection and use
+# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association
+# information from the driver.
+# 1: wpa_supplicant initiates scanning and AP selection; if no APs matching to
+# the currently enabled networks are found, a new network (IBSS or AP mode
+# operation) may be initialized (if configured) (default)
+# 0: This mode must only be used when using wired Ethernet drivers
+# (including MACsec).
+# 2: like 0, but associate with APs using security policy and SSID (but not
+# BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to
+# enable operation with hidden SSIDs and optimized roaming; in this mode,
+# the network blocks in the configuration file are tried one by one until
+# the driver reports successful association; each network block should have
+# explicit security policy (i.e., only one option in the lists) for
+# key_mgmt, pairwise, group, proto variables
+# Note: ap_scan=0/2 should not be used with the nl80211 driver interface (the
+# current Linux interface). ap_scan=1 is the only option working with nl80211.
+# For finding networks using hidden SSID, scan_ssid=1 in the network block can
+# be used with nl80211.
+# When using IBSS or AP mode, ap_scan=2 mode can force the new network to be
+# created immediately regardless of scan results. ap_scan=1 mode will first try
+# to scan for existing networks and only if no matches with the enabled
+# networks are found, a new IBSS or AP mode network is created.
+ap_scan=1
+
+# Whether to force passive scan for network connection
+#
+# By default, scans will send out Probe Request frames on channels that allow
+# active scanning. This advertise the local station to the world. Normally this
+# is fine, but users may wish to do passive scanning where the radio should only
+# listen quietly for Beacon frames and not send any Probe Request frames. Actual
+# functionality may be driver dependent.
+#
+# This parameter can be used to force only passive scanning to be used
+# for network connection cases. It should be noted that this will slow
+# down scan operations and reduce likelihood of finding the AP. In
+# addition, some use cases will override this due to functional
+# requirements, e.g., for finding an AP that uses hidden SSID
+# (scan_ssid=1) or P2P device discovery.
+#
+# 0: Do normal scans (allow active scans) (default)
+# 1: Do passive scans.
+#passive_scan=0
+
+# MPM residency
+# By default, wpa_supplicant implements the mesh peering manager (MPM) for an
+# open mesh. However, if the driver can implement the MPM, you may set this to
+# 0 to use the driver version. When AMPE is enabled, the wpa_supplicant MPM is
+# always used.
+# 0: MPM lives in the driver
+# 1: wpa_supplicant provides an MPM which handles peering (default)
+#user_mpm=1
+
+# Maximum number of peer links (0-255; default: 99)
+# Maximum number of mesh peering currently maintained by the STA.
+#max_peer_links=99
+
+# Timeout in seconds to detect STA inactivity (default: 300 seconds)
+#
+# This timeout value is used in mesh STA to clean up inactive stations.
+#mesh_max_inactivity=300
+
+# Enable 802.11s layer-2 routing and forwarding (dot11MeshForwarding)
+#mesh_fwding=1
+
+# cert_in_cb - Whether to include a peer certificate dump in events
+# This controls whether peer certificates for authentication server and
+# its certificate chain are included in EAP peer certificate events. This is
+# enabled by default.
+#cert_in_cb=1
+
+# EAP fast re-authentication
+# By default, fast re-authentication is enabled for all EAP methods that
+# support it. This variable can be used to disable fast re-authentication.
+# Normally, there is no need to disable this.
+fast_reauth=1
+
+# OpenSSL Engine support
+# These options can be used to load OpenSSL engines in special or legacy
+# modes.
+# The two engines that are supported currently are shown below:
+# They are both from the opensc project (http://www.opensc.org/)
+# By default the PKCS#11 engine is loaded if the client_cert or
+# private_key option appear to be a PKCS#11 URI, and these options
+# should not need to be used explicitly.
+# make the opensc engine available
+#opensc_engine_path=/usr/lib/opensc/engine_opensc.so
+# make the pkcs11 engine available
+#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so
+# configure the path to the pkcs11 module required by the pkcs11 engine
+#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
+
+# OpenSSL cipher string
+#
+# This is an OpenSSL specific configuration option for configuring the default
+# ciphers. If not set, the value configured at build time ("DEFAULT:!EXP:!LOW"
+# by default) is used.
+# See https://www.openssl.org/docs/apps/ciphers.html for OpenSSL documentation
+# on cipher suite configuration. This is applicable only if wpa_supplicant is
+# built to use OpenSSL.
+#openssl_ciphers=DEFAULT:!EXP:!LOW
+
+# Dynamic EAP methods
+# If EAP methods were built dynamically as shared object files, they need to be
+# loaded here before being used in the network blocks. By default, EAP methods
+# are included statically in the build, so these lines are not needed
+#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so
+#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so
+
+# Driver interface parameters
+# This field can be used to configure arbitrary driver interface parameters. The
+# format is specific to the selected driver interface. This field is not used
+# in most cases.
+#driver_param="field=value"
+
+# Country code
+# The ISO/IEC alpha2 country code for the country in which this device is
+# currently operating.
+#country=US
+
+# Maximum lifetime for PMKSA in seconds; default 43200
+#dot11RSNAConfigPMKLifetime=43200
+# Threshold for reauthentication (percentage of PMK lifetime); default 70
+#dot11RSNAConfigPMKReauthThreshold=70
+# Timeout for security association negotiation in seconds; default 60
+#dot11RSNAConfigSATimeout=60
+
+# Wi-Fi Protected Setup (WPS) parameters
+
+# Universally Unique IDentifier (UUID; see RFC 4122) of the device
+# If not configured, UUID will be generated based on the mechanism selected with
+# the auto_uuid parameter.
+#uuid=12345678-9abc-def0-1234-56789abcdef0
+
+# Automatic UUID behavior
+# 0 = generate static value based on the local MAC address (default)
+# 1 = generate a random UUID every time wpa_supplicant starts
+#auto_uuid=0
+
+# Device Name
+# User-friendly description of device; up to 32 octets encoded in UTF-8
+#device_name=Wireless Client
+
+# Manufacturer
+# The manufacturer of the device (up to 64 ASCII characters)
+#manufacturer=Company
+
+# Model Name
+# Model of the device (up to 32 ASCII characters)
+#model_name=cmodel
+
+# Model Number
+# Additional device description (up to 32 ASCII characters)
+#model_number=123
+
+# Serial Number
+# Serial number of the device (up to 32 characters)
+#serial_number=12345
+
+# Primary Device Type
+# Used format: <categ>-<OUI>-<subcateg>
+# categ = Category as an integer value
+# OUI = OUI and type octet as a 4-octet hex-encoded value; 0050F204 for
+# default WPS OUI
+# subcateg = OUI-specific Sub Category as an integer value
+# Examples:
+# 1-0050F204-1 (Computer / PC)
+# 1-0050F204-2 (Computer / Server)
+# 5-0050F204-1 (Storage / NAS)
+# 6-0050F204-1 (Network Infrastructure / AP)
+#device_type=1-0050F204-1
+
+# OS Version
+# 4-octet operating system version number (hex string)
+#os_version=01020300
+
+# Config Methods
+# List of the supported configuration methods
+# Available methods: usba ethernet label display ext_nfc_token int_nfc_token
+# nfc_interface push_button keypad virtual_display physical_display
+# virtual_push_button physical_push_button
+# For WSC 1.0:
+#config_methods=label display push_button keypad
+# For WSC 2.0:
+#config_methods=label virtual_display virtual_push_button keypad
+
+# Credential processing
+# 0 = process received credentials internally (default)
+# 1 = do not process received credentials; just pass them over ctrl_iface to
+# external program(s)
+# 2 = process received credentials internally and pass them over ctrl_iface
+# to external program(s)
+#wps_cred_processing=0
+
+# Whether to enable SAE (WPA3-Personal transition mode) automatically for
+# WPA2-PSK credentials received using WPS.
+# 0 = only add the explicitly listed WPA2-PSK configuration (default)
+# 1 = add both the WPA2-PSK and SAE configuration and enable PMF so that the
+# station gets configured in WPA3-Personal transition mode (supports both
+# WPA2-Personal (PSK) and WPA3-Personal (SAE) APs).
+#wps_cred_add_sae=0
+
+# Vendor attribute in WPS M1, e.g., Windows 7 Vertical Pairing
+# The vendor attribute contents to be added in M1 (hex string)
+#wps_vendor_ext_m1=000137100100020001
+
+# NFC password token for WPS
+# These parameters can be used to configure a fixed NFC password token for the
+# station. This can be generated, e.g., with nfc_pw_token. When these
+# parameters are used, the station is assumed to be deployed with a NFC tag
+# that includes the matching NFC password token (e.g., written based on the
+# NDEF record from nfc_pw_token).
+#
+#wps_nfc_dev_pw_id: Device Password ID (16..65535)
+#wps_nfc_dh_pubkey: Hexdump of DH Public Key
+#wps_nfc_dh_privkey: Hexdump of DH Private Key
+#wps_nfc_dev_pw: Hexdump of Device Password
+
+# Priority for the networks added through WPS
+# This priority value will be set to each network profile that is added
+# by executing the WPS protocol.
+#wps_priority=0
+
+# Device Provisioning Protocol (DPP) parameters
+#
+# How to process DPP configuration
+# 0 = report received configuration to an external program for
+# processing; do not generate any network profile internally (default)
+# 1 = report received configuration to an external program and generate
+# a network profile internally, but do not automatically connect
+# to the created (disabled) profile; the network profile id is
+# reported to external programs
+# 2 = report received configuration to an external program, generate
+# a network profile internally, try to connect to the created
+# profile automatically
+#dpp_config_processing=0
+#
+# Name for Enrollee's DPP Configuration Request
+#dpp_name=Test
+#
+# MUD URL for Enrollee's DPP Configuration Request (optional)
+#dpp_mud_url=https://example.com/mud
+
+# Maximum number of BSS entries to keep in memory
+# Default: 200
+# This can be used to limit memory use on the BSS entries (cached scan
+# results). A larger value may be needed in environments that have huge number
+# of APs when using ap_scan=1 mode.
+#bss_max_count=200
+
+# BSS expiration age in seconds. A BSS will be removed from the local cache
+# if it is not in use and has not been seen for this time. Default is 180.
+#bss_expiration_age=180
+
+# BSS expiration after number of scans. A BSS will be removed from the local
+# cache if it is not seen in this number of scans.
+# Default is 2.
+#bss_expiration_scan_count=2
+
+# Automatic scan
+# This is an optional set of parameters for automatic scanning
+# within an interface in following format:
+#autoscan=<autoscan module name>:<module parameters>
+# autoscan is like bgscan but on disconnected or inactive state.
+# For instance, on exponential module parameters would be <base>:<limit>
+#autoscan=exponential:3:300
+# Which means a delay between scans on a base exponential of 3,
+# up to the limit of 300 seconds (3, 9, 27 ... 300)
+# For periodic module, parameters would be <fixed interval>
+#autoscan=periodic:30
+# So a delay of 30 seconds will be applied between each scan.
+# Note: If sched_scan_plans are configured and supported by the driver,
+# autoscan is ignored.
+
+# filter_ssids - SSID-based scan result filtering
+# 0 = do not filter scan results (default)
+# 1 = only include configured SSIDs in scan results/BSS table
+#filter_ssids=0
+
+# Password (and passphrase, etc.) backend for external storage
+# format: <backend name>[:<optional backend parameters>]
+# Test backend which stores passwords in memory. Should only be used for
+# development purposes.
+#ext_password_backend=test:pw1=password|pw2=testing
+# File-based backend which reads passwords from a file. The parameter
+# identifies the file to read passwords from. The password file follows the
+# format of wpa_supplicant.conf and accepts simple `key=passphrase` formatted
+# passwords.
+#ext_password_backend=file:/path/to/passwords.conf
+
+
+# Disable P2P functionality
+# p2p_disabled=1
+
+# Timeout in seconds to detect STA inactivity (default: 300 seconds)
+#
+# This timeout value is used in P2P GO mode to clean up
+# inactive stations.
+#p2p_go_max_inactivity=300
+
+# Passphrase length (8..63) for P2P GO
+#
+# This parameter controls the length of the random passphrase that is
+# generated at the GO. Default: 8.
+#p2p_passphrase_len=8
+
+# Extra delay between concurrent P2P search iterations
+#
+# This value adds extra delay in milliseconds between concurrent search
+# iterations to make p2p_find friendlier to concurrent operations by avoiding
+# it from taking 100% of radio resources. The default value is 500 ms.
+#p2p_search_delay=500
+
+# Opportunistic Key Caching (also known as Proactive Key Caching) default
+# This parameter can be used to set the default behavior for the
+# proactive_key_caching parameter. By default, OKC is disabled unless enabled
+# with the global okc=1 parameter or with the per-network
+# proactive_key_caching=1 parameter. With okc=1, OKC is enabled by default, but
+# can be disabled with per-network proactive_key_caching=0 parameter.
+#okc=0
+
+# Protected Management Frames default
+# This parameter can be used to set the default behavior for the ieee80211w
+# parameter for RSN networks. By default, PMF is disabled unless enabled with
+# the global pmf=1/2 parameter or with the per-network ieee80211w=1/2 parameter.
+# With pmf=1/2, PMF is enabled/required by default, but can be disabled with the
+# per-network ieee80211w parameter. This global default value does not apply
+# for non-RSN networks (key_mgmt=NONE) since PMF is available only when using
+# RSN.
+#pmf=0
+
+# Enabled SAE finite cyclic groups in preference order
+# By default (if this parameter is not set), the mandatory group 19 (ECC group
+# defined over a 256-bit prime order field, NIST P-256) is preferred and groups
+# 20 (NIST P-384) and 21 (NIST P-521) are also enabled. If this parameter is
+# set, the groups will be tried in the indicated order.
+# The group values are listed in the IANA registry:
+# http://www.iana.org/assignments/ipsec-registry/ipsec-registry.xml#ipsec-registry-9
+# Note that groups 1, 2, 5, 22, 23, and 24 should not be used in production
+# purposes due limited security (see RFC 8247). Groups that are not as strong as
+# group 19 (ECC, NIST P-256) are unlikely to be useful for production use cases
+# since all implementations are required to support group 19.
+#sae_groups=19 20 21
+
+# SAE mechanism for PWE derivation
+# 0 = hunting-and-pecking loop only (default without password identifier)
+# 1 = hash-to-element only (default with password identifier)
+# 2 = both hunting-and-pecking loop and hash-to-element enabled
+# Note: The default value is likely to change from 0 to 2 once the new
+# hash-to-element mechanism has received more interoperability testing.
+# When using SAE password identifier, the hash-to-element mechanism is used
+# regardless of the sae_pwe parameter value.
+#sae_pwe=0
+
+# Default value for DTIM period (if not overridden in network block)
+#dtim_period=2
+
+# Default value for Beacon interval (if not overridden in network block)
+#beacon_int=100
+
+# Additional vendor specific elements for Beacon and Probe Response frames
+# This parameter can be used to add additional vendor specific element(s) into
+# the end of the Beacon and Probe Response frames. The format for these
+# element(s) is a hexdump of the raw information elements (id+len+payload for
+# one or more elements). This is used in AP and P2P GO modes.
+#ap_vendor_elements=dd0411223301
+
+# Ignore scan results older than request
+#
+# The driver may have a cache of scan results that makes it return
+# information that is older than our scan trigger. This parameter can
+# be used to configure such old information to be ignored instead of
+# allowing it to update the internal BSS table.
+#ignore_old_scan_res=0
+
+# scan_cur_freq: Whether to scan only the current frequency
+# 0: Scan all available frequencies. (Default)
+# 1: Scan current operating frequency if another VIF on the same radio
+# is already associated.
+
+# Seconds to consider old scan results valid for association (default: 5)
+#scan_res_valid_for_connect=5
+
+# MAC address policy default
+# 0 = use permanent MAC address
+# 1 = use random MAC address for each ESS connection
+# 2 = like 1, but maintain OUI (with local admin bit set)
+#
+# By default, permanent MAC address is used unless policy is changed by
+# the per-network mac_addr parameter. Global mac_addr=1 can be used to
+# change this default behavior.
+#mac_addr=0
+
+# Lifetime of random MAC address in seconds (default: 60)
+#rand_addr_lifetime=60
+
+# MAC address policy for pre-association operations (scanning, ANQP)
+# 0 = use permanent MAC address
+# 1 = use random MAC address
+# 2 = like 1, but maintain OUI (with local admin bit set)
+#preassoc_mac_addr=0
+
+# MAC address policy for GAS operations
+# 0 = use permanent MAC address
+# 1 = use random MAC address
+# 2 = like 1, but maintain OUI (with local admin bit set)
+# Note that this setting is ignored when a specific MAC address is needed for
+# a full protocol exchange that includes GAS, e.g., when going through a DPP
+# exchange that exposes the configured interface address as part of the DP
+# Public Action frame exchanges before using GAS. That same address is then used
+# during the GAS exchange as well to avoid breaking the protocol expectations.
+#gas_rand_mac_addr=0
+
+# Lifetime of GAS random MAC address in seconds (default: 60)
+#gas_rand_addr_lifetime=60
+
+# Interworking (IEEE 802.11u)
+
+# Enable Interworking
+# interworking=1
+
+# Enable P2P GO advertisement of Interworking
+# go_interworking=1
+
+# P2P GO Interworking: Access Network Type
+# 0 = Private network
+# 1 = Private network with guest access
+# 2 = Chargeable public network
+# 3 = Free public network
+# 4 = Personal device network
+# 5 = Emergency services only network
+# 14 = Test or experimental
+# 15 = Wildcard
+#go_access_network_type=0
+
+# P2P GO Interworking: Whether the network provides connectivity to the Internet
+# 0 = Unspecified
+# 1 = Network provides connectivity to the Internet
+#go_internet=1
+
+# P2P GO Interworking: Group Venue Info (optional)
+# The available values are defined in IEEE Std 802.11-2016, 9.4.1.35.
+# Example values (group,type):
+# 0,0 = Unspecified
+# 1,7 = Convention Center
+# 1,13 = Coffee Shop
+# 2,0 = Unspecified Business
+# 7,1 Private Residence
+#go_venue_group=7
+#go_venue_type=1
+
+# Homogeneous ESS identifier
+# If this is set, scans will be used to request response only from BSSes
+# belonging to the specified Homogeneous ESS. This is used only if interworking
+# is enabled.
+# hessid=00:11:22:33:44:55
+
+# Automatic network selection behavior
+# 0 = do not automatically go through Interworking network selection
+# (i.e., require explicit interworking_select command for this; default)
+# 1 = perform Interworking network selection if one or more
+# credentials have been configured and scan did not find a
+# matching network block
+#auto_interworking=0
+
+# GAS Address3 field behavior
+# 0 = P2P specification (Address3 = AP BSSID); default
+# 1 = IEEE 802.11 standard compliant (Address3 = Wildcard BSSID when
+# sent to not-associated AP; if associated, AP BSSID)
+#gas_address3=0
+
+# Publish fine timing measurement (FTM) responder functionality in
+# the Extended Capabilities element bit 70.
+# Controls whether FTM responder functionality will be published by AP/STA.
+# Note that actual FTM responder operation is managed outside wpa_supplicant.
+# 0 = Do not publish; default
+# 1 = Publish
+#ftm_responder=0
+
+# Publish fine timing measurement (FTM) initiator functionality in
+# the Extended Capabilities element bit 71.
+# Controls whether FTM initiator functionality will be published by AP/STA.
+# Note that actual FTM initiator operation is managed outside wpa_supplicant.
+# 0 = Do not publish; default
+# 1 = Publish
+#ftm_initiator=0
+
+# credential block
+#
+# Each credential used for automatic network selection is configured as a set
+# of parameters that are compared to the information advertised by the APs when
+# interworking_select and interworking_connect commands are used.
+#
+# credential fields:
+#
+# temporary: Whether this credential is temporary and not to be saved
+#
+# priority: Priority group
+# By default, all networks and credentials get the same priority group
+# (0). This field can be used to give higher priority for credentials
+# (and similarly in struct wpa_ssid for network blocks) to change the
+# Interworking automatic networking selection behavior. The matching
+# network (based on either an enabled network block or a credential)
+# with the highest priority value will be selected.
+#
+# pcsc: Use PC/SC and SIM/USIM card
+#
+# realm: Home Realm for Interworking
+#
+# username: Username for Interworking network selection
+#
+# password: Password for Interworking network selection
+#
+# ca_cert: CA certificate for Interworking network selection
+#
+# client_cert: File path to client certificate file (PEM/DER)
+# This field is used with Interworking networking selection for a case
+# where client certificate/private key is used for authentication
+# (EAP-TLS). Full path to the file should be used since working
+# directory may change when wpa_supplicant is run in the background.
+#
+# Certificates from PKCS#11 tokens can be referenced by a PKCS#11 URI.
+#
+# For example: private_key="pkcs11:manufacturer=piv_II;id=%01"
+#
+# Alternatively, a named configuration blob can be used by setting
+# this to blob://blob_name.
+#
+# private_key: File path to client private key file (PEM/DER/PFX)
+# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
+# commented out. Both the private key and certificate will be read
+# from the PKCS#12 file in this case. Full path to the file should be
+# used since working directory may change when wpa_supplicant is run
+# in the background.
+#
+# Keys in PKCS#11 tokens can be referenced by a PKCS#11 URI.
+# For example: private_key="pkcs11:manufacturer=piv_II;id=%01"
+#
+# Windows certificate store can be used by leaving client_cert out and
+# configuring private_key in one of the following formats:
+#
+# cert://substring_to_match
+#
+# hash://certificate_thumbprint_in_hex
+#
+# For example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
+#
+# Note that when running wpa_supplicant as an application, the user
+# certificate store (My user account) is used, whereas computer store
+# (Computer account) is used when running wpasvc as a service.
+#
+# Alternatively, a named configuration blob can be used by setting
+# this to blob://blob_name.
+#
+# private_key_passwd: Password for private key file
+#
+# imsi: IMSI in <MCC> | <MNC> | '-' | <MSIN> format
+#
+# milenage: Milenage parameters for SIM/USIM simulator in <Ki>:<OPc>:<SQN>
+# format
+#
+# domain: Home service provider FQDN(s)
+# This is used to compare against the Domain Name List to figure out
+# whether the AP is operated by the Home SP. Multiple domain entries can
+# be used to configure alternative FQDNs that will be considered home
+# networks.
+#
+# roaming_consortium: Roaming Consortium OI
+# If roaming_consortium_len is non-zero, this field contains the
+# Roaming Consortium OI that can be used to determine which access
+# points support authentication with this credential. This is an
+# alternative to the use of the realm parameter. When using Roaming
+# Consortium to match the network, the EAP parameters need to be
+# pre-configured with the credential since the NAI Realm information
+# may not be available or fetched.
+#
+# required_roaming_consortium: Required Roaming Consortium OI
+# If required_roaming_consortium_len is non-zero, this field contains the
+# Roaming Consortium OI that is required to be advertised by the AP for
+# the credential to be considered matching.
+#
+# roaming_consortiums: Roaming Consortium OI(s) memberships
+# This string field contains one or more comma delimited OIs (hexdump)
+# identifying the roaming consortiums of which the provider is a member.
+# The list is sorted from the most preferred one to the least preferred
+# one. A match between the Roaming Consortium OIs advertised by an AP and
+# the OIs in this list indicates that successful authentication is
+# possible.
+# (Hotspot 2.0 PerProviderSubscription/<X+>/HomeSP/RoamingConsortiumOI)
+#
+# eap: Pre-configured EAP method
+# This optional field can be used to specify which EAP method will be
+# used with this credential. If not set, the EAP method is selected
+# automatically based on ANQP information (e.g., NAI Realm).
+#
+# phase1: Pre-configure Phase 1 (outer authentication) parameters
+# This optional field is used with like the 'eap' parameter.
+#
+# phase2: Pre-configure Phase 2 (inner authentication) parameters
+# This optional field is used with like the 'eap' parameter.
+#
+# excluded_ssid: Excluded SSID
+# This optional field can be used to excluded specific SSID(s) from
+# matching with the network. Multiple entries can be used to specify more
+# than one SSID.
+#
+# roaming_partner: Roaming partner information
+# This optional field can be used to configure preferences between roaming
+# partners. The field is a string in following format:
+# <FQDN>,<0/1 exact match>,<priority>,<* or country code>
+# (non-exact match means any subdomain matches the entry; priority is in
+# 0..255 range with 0 being the highest priority)
+#
+# update_identifier: PPS MO ID
+# (Hotspot 2.0 PerProviderSubscription/UpdateIdentifier)
+#
+# provisioning_sp: FQDN of the SP that provisioned the credential
+# This optional field can be used to keep track of the SP that provisioned
+# the credential to find the PPS MO (./Wi-Fi/<provisioning_sp>).
+#
+# Minimum backhaul threshold (PPS/<X+>/Policy/MinBackhauldThreshold/*)
+# These fields can be used to specify minimum download/upload backhaul
+# bandwidth that is preferred for the credential. This constraint is
+# ignored if the AP does not advertise WAN Metrics information or if the
+# limit would prevent any connection. Values are in kilobits per second.
+# min_dl_bandwidth_home
+# min_ul_bandwidth_home
+# min_dl_bandwidth_roaming
+# min_ul_bandwidth_roaming
+#
+# max_bss_load: Maximum BSS Load Channel Utilization (1..255)
+# (PPS/<X+>/Policy/MaximumBSSLoadValue)
+# This value is used as the maximum channel utilization for network
+# selection purposes for home networks. If the AP does not advertise
+# BSS Load or if the limit would prevent any connection, this constraint
+# will be ignored.
+#
+# req_conn_capab: Required connection capability
+# (PPS/<X+>/Policy/RequiredProtoPortTuple)
+# This value is used to configure set of required protocol/port pairs that
+# a roaming network shall support (include explicitly in Connection
+# Capability ANQP element). This constraint is ignored if the AP does not
+# advertise Connection Capability or if this constraint would prevent any
+# network connection. This policy is not used in home networks.
+# Format: <protocol>[:<comma-separated list of ports]
+# Multiple entries can be used to list multiple requirements.
+# For example, number of common TCP protocols:
+# req_conn_capab=6,22,80,443
+# For example, IPSec/IKE:
+# req_conn_capab=17:500
+# req_conn_capab=50
+#
+# ocsp: Whether to use/require OCSP to check server certificate
+# 0 = do not use OCSP stapling (TLS certificate status extension)
+# 1 = try to use OCSP stapling, but not require response
+# 2 = require valid OCSP stapling response
+# 3 = require valid OCSP stapling response for all not-trusted
+# certificates in the server certificate chain
+#
+# sim_num: Identifier for which SIM to use in multi-SIM devices
+#
+# for example:
+#
+#cred={
+# realm="example.com"
+# username="user@example.com"
+# password="password"
+# ca_cert="/etc/wpa_supplicant/ca.pem"
+# domain="example.com"
+#}
+#
+#cred={
+# imsi="310026-000000000"
+# milenage="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82"
+#}
+#
+#cred={
+# realm="example.com"
+# username="user"
+# password="password"
+# ca_cert="/etc/wpa_supplicant/ca.pem"
+# domain="example.com"
+# roaming_consortium=223344
+# eap=TTLS
+# phase2="auth=MSCHAPV2"
+#}
+
+# Hotspot 2.0
+# hs20=1
+
+# Scheduled scan plans
+#
+# A space delimited list of scan plans. Each scan plan specifies the scan
+# interval and number of iterations, delimited by a colon. The last scan plan
+# will run infinitely and thus must specify only the interval and not the number
+# of iterations.
+#
+# The driver advertises the maximum number of scan plans supported. If more scan
+# plans than supported are configured, only the first ones are set (up to the
+# maximum supported). The last scan plan that specifies only the interval is
+# always set as the last plan.
+#
+# If the scan interval or the number of iterations for a scan plan exceeds the
+# maximum supported, it will be set to the maximum supported value.
+#
+# Format:
+# sched_scan_plans=<interval:iterations> <interval:iterations> ... <interval>
+#
+# Example:
+# sched_scan_plans=10:100 20:200 30
+
+# Multi Band Operation (MBO) non-preferred channels
+# A space delimited list of non-preferred channels where each channel is a colon
+# delimited list of values.
+# Format:
+# non_pref_chan=<oper_class>:<chan>:<preference>:<reason>
+# Example:
+# non_pref_chan=81:5:10:2 81:1:0:2 81:9:0:2
+
+# MBO Cellular Data Capabilities
+# 1 = Cellular data connection available
+# 2 = Cellular data connection not available
+# 3 = Not cellular capable (default)
+#mbo_cell_capa=3
+
+# Optimized Connectivity Experience (OCE)
+# oce: Enable OCE features (bitmap)
+# Set BIT(0) to Enable OCE in non-AP STA mode (default; disabled if the driver
+# does not indicate support for OCE in STA mode)
+# Set BIT(1) to Enable OCE in STA-CFON mode
+#oce=1
+
+# Extended Key ID support for Individually Addressed frames
+# 0 = force off: Do not use Extended Key ID (default)
+# 1 = auto: Activate Extended Key ID support if the driver supports it
+#extended_key_id=0
+
+# network block
+#
+# Each network (usually AP's sharing the same SSID) is configured as a separate
+# block in this configuration file. The network blocks are in preference order
+# (the first match is used).
+#
+# network block fields:
+#
+# disabled:
+# 0 = this network can be used (default)
+# 1 = this network block is disabled (can be enabled through ctrl_iface,
+# e.g., with wpa_cli or wpa_gui)
+#
+# id_str: Network identifier string for external scripts. This value is passed
+# to external action script through wpa_cli as WPA_ID_STR environment
+# variable to make it easier to do network specific configuration.
+#
+# ssid: SSID (mandatory); network name in one of the optional formats:
+# - an ASCII string with double quotation
+# - a hex string (two characters per octet of SSID)
+# - a printf-escaped ASCII string P"<escaped string>"
+#
+# scan_ssid:
+# 0 = do not scan this SSID with specific Probe Request frames (default)
+# 1 = scan with SSID-specific Probe Request frames (this can be used to
+# find APs that do not accept broadcast SSID or use multiple SSIDs;
+# this will add latency to scanning, so enable this only when needed)
+#
+# bssid: BSSID (optional); if set, this network block is used only when
+# associating with the AP using the configured BSSID
+#
+# ignore_broadcast_ssid: SSID broadcast behavior
+# Send empty SSID in beacons and ignore probe request frames that do not
+# specify full SSID, i.e., require stations to know SSID.
+# default: disabled (0)
+# 1 = send empty (length=0) SSID in beacon and ignore probe request for
+# broadcast SSID
+# 2 = clear SSID (ASCII 0), but keep the original length (this may be required
+# with some clients that do not support empty SSID) and ignore probe
+# requests for broadcast SSID
+#
+# priority: priority group (integer)
+# By default, all networks will get same priority group (0). If some of the
+# networks are more desirable, this field can be used to change the order in
+# which wpa_supplicant goes through the networks when selecting a BSS. The
+# priority groups will be iterated in decreasing priority (i.e., the larger the
+# priority value, the sooner the network is matched against the scan results).
+# Within each priority group, networks will be selected based on security
+# policy, signal strength, etc.
+# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not
+# using this priority to select the order for scanning. Instead, they try the
+# networks in the order that used in the configuration file.
+#
+# mode: IEEE 802.11 operation mode
+# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)
+# 1 = IBSS (ad-hoc, peer-to-peer)
+# 2 = AP (access point)
+# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP) and
+# WPA-PSK (with proto=RSN). In addition, key_mgmt=WPA-NONE (fixed group key
+# TKIP/CCMP) is available for backwards compatibility, but its use is
+# deprecated. WPA-None requires following network block options:
+# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not
+# both), and psk must also be set.
+#
+# frequency: Channel frequency in megahertz (MHz) for IBSS, e.g.,
+# 2412 = IEEE 802.11b/g channel 1. This value is used to configure the initial
+# channel for IBSS (adhoc) networks. It is ignored in the infrastructure mode.
+# In addition, this value is only used by the station that creates the IBSS. If
+# an IBSS network with the configured SSID is already present, the frequency of
+# the network will be used instead of this configured value.
+#
+# pbss: Whether to use PBSS. Relevant to IEEE 802.11ad networks only.
+# 0 = do not use PBSS
+# 1 = use PBSS
+# 2 = don't care (not allowed in AP mode)
+# Used together with mode configuration. When mode is AP, it means to start a
+# PCP instead of a regular AP. When mode is infrastructure it means connect
+# to a PCP instead of AP. In this mode you can also specify 2 (don't care)
+# which means connect to either PCP or AP.
+# P2P_GO and P2P_GROUP_FORMATION modes must use PBSS in IEEE 802.11ad network.
+# For more details, see IEEE Std 802.11ad-2012.
+#
+# scan_freq: List of frequencies to scan
+# Space-separated list of frequencies in MHz to scan when searching for this
+# BSS. If the subset of channels used by the network is known, this option can
+# be used to optimize scanning to not occur on channels that the network does
+# not use. Example: scan_freq=2412 2437 2462
+#
+# freq_list: Array of allowed frequencies
+# Space-separated list of frequencies in MHz to allow for selecting the BSS. If
+# set, scan results that do not match any of the specified frequencies are not
+# considered when selecting a BSS.
+#
+# This can also be set on the outside of the network block. In this case,
+# it limits the frequencies that will be scanned.
+#
+# bgscan: Background scanning
+# wpa_supplicant behavior for background scanning can be specified by
+# configuring a bgscan module. These modules are responsible for requesting
+# background scans for the purpose of roaming within an ESS (i.e., within a
+# single network block with all the APs using the same SSID). The bgscan
+# parameter uses following format: "<bgscan module name>:<module parameters>"
+# Following bgscan modules are available:
+# simple - Periodic background scans based on signal strength
+# bgscan="simple:<short bgscan interval in seconds>:<signal strength threshold>:
+# <long interval>"
+# bgscan="simple:30:-45:300"
+# learn - Learn channels used by the network and try to avoid bgscans on other
+# channels (experimental)
+# bgscan="learn:<short bgscan interval in seconds>:<signal strength threshold>:
+# <long interval>[:<database file name>]"
+# bgscan="learn:30:-45:300:/etc/wpa_supplicant/network1.bgscan"
+# Explicitly disable bgscan by setting
+# bgscan=""
+#
+# This option can also be set outside of all network blocks for the bgscan
+# parameter to apply for all the networks that have no specific bgscan
+# parameter.
+#
+# proto: list of accepted protocols
+# WPA = WPA/IEEE 802.11i/D3.0
+# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN)
+# Note that RSN is used also for WPA3.
+# If not set, this defaults to: WPA RSN
+#
+# key_mgmt: list of accepted authenticated key management protocols
+# WPA-PSK = WPA pre-shared key (this requires 'psk' field)
+# WPA-EAP = WPA using EAP authentication
+# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically
+# generated WEP keys
+# NONE = WPA is not used; plaintext or static WEP could be used
+# WPA-NONE = WPA-None for IBSS (deprecated; use proto=RSN key_mgmt=WPA-PSK
+# instead)
+# FT-PSK = Fast BSS Transition (IEEE 802.11r) with pre-shared key
+# FT-EAP = Fast BSS Transition (IEEE 802.11r) with EAP authentication
+# FT-EAP-SHA384 = Fast BSS Transition (IEEE 802.11r) with EAP authentication
+# and using SHA384
+# WPA-PSK-SHA256 = Like WPA-PSK but using stronger SHA256-based algorithms
+# WPA-EAP-SHA256 = Like WPA-EAP but using stronger SHA256-based algorithms
+# SAE = Simultaneous authentication of equals; pre-shared key/password -based
+# authentication with stronger security than WPA-PSK especially when using
+# not that strong password; a.k.a. WPA3-Personal
+# FT-SAE = SAE with FT
+# WPA-EAP-SUITE-B = Suite B 128-bit level
+# WPA-EAP-SUITE-B-192 = Suite B 192-bit level
+# OSEN = Hotspot 2.0 Rel 2 online signup connection
+# FILS-SHA256 = Fast Initial Link Setup with SHA256
+# FILS-SHA384 = Fast Initial Link Setup with SHA384
+# FT-FILS-SHA256 = FT and Fast Initial Link Setup with SHA256
+# FT-FILS-SHA384 = FT and Fast Initial Link Setup with SHA384
+# OWE = Opportunistic Wireless Encryption (a.k.a. Enhanced Open)
+# DPP = Device Provisioning Protocol
+# If not set, this defaults to: WPA-PSK WPA-EAP
+#
+# ieee80211w: whether management frame protection is enabled
+# 0 = disabled (default unless changed with the global pmf parameter)
+# 1 = optional
+# 2 = required
+# The most common configuration options for this based on the PMF (protected
+# management frames) certification program are:
+# PMF enabled: ieee80211w=1 and key_mgmt=WPA-EAP WPA-EAP-SHA256
+# PMF required: ieee80211w=2 and key_mgmt=WPA-EAP-SHA256
+# (and similarly for WPA-PSK and WPA-PSK-SHA256 if WPA2-Personal is used)
+# WPA3-Personal-only mode: ieee80211w=2 and key_mgmt=SAE
+#
+# ocv: whether operating channel validation is enabled
+# This is a countermeasure against multi-channel on-path attacks.
+# Enabling this automatically also enables ieee80211w, if not yet enabled.
+# 0 = disabled (default)
+# 1 = enabled if wpa_supplicant's SME in use. Otherwise enabled only when the
+# driver indicates support for operating channel validation.
+#ocv=1
+#
+# auth_alg: list of allowed IEEE 802.11 authentication algorithms
+# OPEN = Open System authentication (required for WPA/WPA2)
+# SHARED = Shared Key authentication (requires static WEP keys)
+# LEAP = LEAP/Network EAP (only used with LEAP)
+# If not set, automatic selection is used (Open System with LEAP enabled if
+# LEAP is allowed as one of the EAP methods).
+#
+# pairwise: list of accepted pairwise (unicast) ciphers for WPA
+# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
+# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
+# NONE = Use only Group Keys (deprecated, should not be included if APs support
+# pairwise keys)
+# If not set, this defaults to: CCMP TKIP
+#
+# group: list of accepted group (broadcast/multicast) ciphers for WPA
+# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
+# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
+# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key
+# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11]
+# If not set, this defaults to: CCMP TKIP WEP104 WEP40
+#
+# group_mgmt: list of accepted group management ciphers for RSN (PMF)
+# AES-128-CMAC = BIP-CMAC-128
+# BIP-GMAC-128
+# BIP-GMAC-256
+# BIP-CMAC-256
+# If not set, no constraint on the cipher, i.e., accept whichever cipher the AP
+# indicates.
+#
+# psk: WPA preshared key; 256-bit pre-shared key
+# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,
+# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be
+# generated using the passphrase and SSID). ASCII passphrase must be between
+# 8 and 63 characters (inclusive). ext:<name of external PSK field> format can
+# be used to indicate that the PSK/passphrase is stored in external storage.
+# This field is not needed, if WPA-EAP is used.
+# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys
+# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant
+# startup and reconfiguration time can be optimized by generating the PSK only
+# only when the passphrase or SSID has actually changed.
+#
+# mem_only_psk: Whether to keep PSK/passphrase only in memory
+# 0 = allow psk/passphrase to be stored to the configuration file
+# 1 = do not store psk/passphrase to the configuration file
+#mem_only_psk=0
+#
+# sae_password: SAE password
+# This parameter can be used to set a password for SAE. By default, the
+# passphrase from the psk parameter is used if this separate parameter is not
+# used, but psk follows the WPA-PSK constraints (8..63 characters) even though
+# SAE passwords do not have such constraints.
+#
+# sae_password_id: SAE password identifier
+# This parameter can be used to set an identifier for the SAE password. By
+# default, no such identifier is used. If set, the specified identifier value
+# is used by the other peer to select which password to use for authentication.
+#
+# eapol_flags: IEEE 802.1X/EAPOL options (bit field)
+# Dynamic WEP key required for non-WPA mode
+# bit0 (1): require dynamically generated unicast WEP key
+# bit1 (2): require dynamically generated broadcast WEP key
+# (3 = require both keys; default)
+# Note: When using wired authentication (including MACsec drivers),
+# eapol_flags must be set to 0 for the authentication to be completed
+# successfully.
+#
+# macsec_policy: IEEE 802.1X/MACsec options
+# This determines how sessions are secured with MACsec (only for MACsec
+# drivers).
+# 0: MACsec not in use (default)
+# 1: MACsec enabled - Should secure, accept key server's advice to
+# determine whether to use a secure session or not.
+#
+# macsec_integ_only: IEEE 802.1X/MACsec transmit mode
+# This setting applies only when MACsec is in use, i.e.,
+# - macsec_policy is enabled
+# - the key server has decided to enable MACsec
+# 0: Encrypt traffic (default)
+# 1: Integrity only
+#
+# macsec_replay_protect: IEEE 802.1X/MACsec replay protection
+# This setting applies only when MACsec is in use, i.e.,
+# - macsec_policy is enabled
+# - the key server has decided to enable MACsec
+# 0: Replay protection disabled (default)
+# 1: Replay protection enabled
+#
+# macsec_replay_window: IEEE 802.1X/MACsec replay protection window
+# This determines a window in which replay is tolerated, to allow receipt
+# of frames that have been misordered by the network.
+# This setting applies only when MACsec replay protection active, i.e.,
+# - macsec_replay_protect is enabled
+# - the key server has decided to enable MACsec
+# 0: No replay window, strict check (default)
+# 1..2^32-1: number of packets that could be misordered
+#
+# macsec_port: IEEE 802.1X/MACsec port
+# Port component of the SCI
+# Range: 1-65534 (default: 1)
+#
+# mka_cak, mka_ckn, and mka_priority: IEEE 802.1X/MACsec pre-shared key mode
+# This allows to configure MACsec with a pre-shared key using a (CAK,CKN) pair.
+# In this mode, instances of wpa_supplicant can act as MACsec peers. The peer
+# with lower priority will become the key server and start distributing SAKs.
+# mka_cak (CAK = Secure Connectivity Association Key) takes a 16-byte (128-bit)
+# hex-string (32 hex-digits) or a 32-byte (256-bit) hex-string (64 hex-digits)
+# mka_ckn (CKN = CAK Name) takes a 1..32-bytes (8..256 bit) hex-string
+# (2..64 hex-digits)
+# mka_priority (Priority of MKA Actor) is in 0..255 range with 255 being
+# default priority
+#
+# mixed_cell: This option can be used to configure whether so called mixed
+# cells, i.e., networks that use both plaintext and encryption in the same
+# SSID, are allowed when selecting a BSS from scan results.
+# 0 = disabled (default)
+# 1 = enabled
+#
+# proactive_key_caching:
+# Enable/disable opportunistic PMKSA caching for WPA2.
+# 0 = disabled (default unless changed with the global okc parameter)
+# 1 = enabled
+#
+# ft_eap_pmksa_caching:
+# Whether FT-EAP PMKSA caching is allowed
+# 0 = do not try to use PMKSA caching with FT-EAP (default)
+# 1 = try to use PMKSA caching with FT-EAP
+# This controls whether to try to use PMKSA caching with FT-EAP for the
+# FT initial mobility domain association.
+#ft_eap_pmksa_caching=0
+#
+# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or
+# hex without quotation, e.g., 0102030405)
+# wep_tx_keyidx: Default WEP key index (TX) (0..3)
+#
+# wpa_ptk_rekey: Maximum lifetime for PTK in seconds. This can be used to
+# enforce rekeying of PTK to mitigate some attacks against TKIP deficiencies.
+#
+# wpa_deny_ptk0_rekey: Workaround for PTK rekey issues
+# PTK0 rekeys (using only one Key ID value for pairwise keys) can degrade the
+# security and stability with some cards.
+# To avoid the issues wpa_supplicant can replace those PTK rekeys (including
+# EAP reauthentications) with fast reconnects.
+#
+# Available options:
+# 0 = always rekey when configured/instructed (default)
+# 1 = only rekey when the local driver is explicitly indicating it can perform
+# this operation without issues
+# 2 = never allow problematic PTK0 rekeys
+#
+# group_rekey: Group rekeying time in seconds. This value, if non-zero, is used
+# as the dot11RSNAConfigGroupRekeyTime parameter when operating in
+# Authenticator role in IBSS, or in AP and mesh modes.
+#
+# Following fields are only used with internal EAP implementation.
+# eap: space-separated list of accepted EAP methods
+# MD5 = EAP-MD5 (insecure and does not generate keying material ->
+# cannot be used with WPA; to be used as a Phase 2 method
+# with EAP-PEAP or EAP-TTLS)
+# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used
+# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+# OTP = EAP-OTP (cannot be used separately with WPA; to be used
+# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+# GTC = EAP-GTC (cannot be used separately with WPA; to be used
+# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+# TLS = EAP-TLS (client and server certificate)
+# PEAP = EAP-PEAP (with tunnelled EAP authentication)
+# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2
+# authentication)
+# If not set, all compiled in methods are allowed.
+#
+# identity: Identity string for EAP
+# This field is also used to configure user NAI for
+# EAP-PSK/PAX/SAKE/GPSK.
+# anonymous_identity: Anonymous identity string for EAP (to be used as the
+# unencrypted identity with EAP types that support different tunnelled
+# identity, e.g., EAP-TTLS). This field can also be used with
+# EAP-SIM/AKA/AKA' to store the pseudonym identity.
+# password: Password string for EAP. This field can include either the
+# plaintext password (using ASCII or hex string) or a NtPasswordHash
+# (16-byte MD4 hash of password) in hash:<32 hex digits> format.
+# NtPasswordHash can only be used when the password is for MSCHAPv2 or
+# MSCHAP (EAP-MSCHAPv2, EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP, LEAP).
+# EAP-PSK (128-bit PSK), EAP-PAX (128-bit PSK), and EAP-SAKE (256-bit
+# PSK) is also configured using this field. For EAP-GPSK, this is a
+# variable length PSK. ext:<name of external password field> format can
+# be used to indicate that the password is stored in external storage.
+# ca_cert: File path to CA certificate file (PEM/DER). This file can have one
+# or more trusted CA certificates. If ca_cert and ca_path are not
+# included, server certificate will not be verified. This is insecure and
+# a trusted CA certificate should always be configured when using
+# EAP-TLS/TTLS/PEAP. Full path should be used since working directory may
+# change when wpa_supplicant is run in the background.
+#
+# Alternatively, this can be used to only perform matching of the server
+# certificate (SHA-256 hash of the DER encoded X.509 certificate). In
+# this case, the possible CA certificates in the server certificate chain
+# are ignored and only the server certificate is verified. This is
+# configured with the following format:
+# hash:://server/sha256/cert_hash_in_hex
+# For example: "hash://server/sha256/
+# 5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a"
+#
+# On Windows, trusted CA certificates can be loaded from the system
+# certificate store by setting this to cert_store://<name>, e.g.,
+# ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT".
+# Note that when running wpa_supplicant as an application, the user
+# certificate store (My user account) is used, whereas computer store
+# (Computer account) is used when running wpasvc as a service.
+# ca_path: Directory path for CA certificate files (PEM). This path may
+# contain multiple CA certificates in OpenSSL format. Common use for this
+# is to point to system trusted CA list which is often installed into
+# directory like /etc/ssl/certs. If configured, these certificates are
+# added to the list of trusted CAs. ca_cert may also be included in that
+# case, but it is not required.
+# client_cert: File path to client certificate file (PEM/DER)
+# Full path should be used since working directory may change when
+# wpa_supplicant is run in the background.
+# Alternatively, a named configuration blob can be used by setting this
+# to blob://<blob name>.
+# private_key: File path to client private key file (PEM/DER/PFX)
+# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
+# commented out. Both the private key and certificate will be read from
+# the PKCS#12 file in this case. Full path should be used since working
+# directory may change when wpa_supplicant is run in the background.
+# Windows certificate store can be used by leaving client_cert out and
+# configuring private_key in one of the following formats:
+# cert://substring_to_match
+# hash://certificate_thumbprint_in_hex
+# for example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
+# Note that when running wpa_supplicant as an application, the user
+# certificate store (My user account) is used, whereas computer store
+# (Computer account) is used when running wpasvc as a service.
+# Alternatively, a named configuration blob can be used by setting this
+# to blob://<blob name>.
+# private_key_passwd: Password for private key file (if left out, this will be
+# asked through control interface)
+# dh_file: File path to DH/DSA parameters file (in PEM format)
+# This is an optional configuration file for setting parameters for an
+# ephemeral DH key exchange. In most cases, the default RSA
+# authentication does not use this configuration. However, it is possible
+# setup RSA to use ephemeral DH key exchange. In addition, ciphers with
+# DSA keys always use ephemeral DH keys. This can be used to achieve
+# forward secrecy. If the file is in DSA parameters format, it will be
+# automatically converted into DH params.
+# subject_match: Substring to be matched against the subject of the
+# authentication server certificate. If this string is set, the server
+# certificate is only accepted if it contains this string in the subject.
+# The subject string is in following format:
+# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com
+# Note: Since this is a substring match, this cannot be used securely to
+# do a suffix match against a possible domain name in the CN entry. For
+# such a use case, domain_suffix_match or domain_match should be used
+# instead.
+# altsubject_match: Semicolon separated string of entries to be matched against
+# the alternative subject name of the authentication server certificate.
+# If this string is set, the server certificate is only accepted if it
+# contains one of the entries in an alternative subject name extension.
+# altSubjectName string is in following format: TYPE:VALUE
+# Example: EMAIL:server@example.com
+# Example: DNS:server.example.com;DNS:server2.example.com
+# Following types are supported: EMAIL, DNS, URI
+# domain_suffix_match: Constraint for server domain name. If set, this FQDN is
+# used as a suffix match requirement for the AAA server certificate in
+# SubjectAltName dNSName element(s). If a matching dNSName is found, this
+# constraint is met. If no dNSName values are present, this constraint is
+# matched against SubjectName CN using same suffix match comparison.
+#
+# Suffix match here means that the host/domain name is compared one label
+# at a time starting from the top-level domain and all the labels in
+# domain_suffix_match shall be included in the certificate. The
+# certificate may include additional sub-level labels in addition to the
+# required labels.
+#
+# More than one match string can be provided by using semicolons to
+# separate the strings (e.g., example.org;example.com). When multiple
+# strings are specified, a match with any one of the values is considered
+# a sufficient match for the certificate, i.e., the conditions are ORed
+# together.
+#
+# For example, domain_suffix_match=example.com would match
+# test.example.com but would not match test-example.com.
+# domain_match: Constraint for server domain name
+# If set, this FQDN is used as a full match requirement for the
+# server certificate in SubjectAltName dNSName element(s). If a
+# matching dNSName is found, this constraint is met. If no dNSName
+# values are present, this constraint is matched against SubjectName CN
+# using same full match comparison. This behavior is similar to
+# domain_suffix_match, but has the requirement of a full match, i.e.,
+# no subdomains or wildcard matches are allowed. Case-insensitive
+# comparison is used, so "Example.com" matches "example.com", but would
+# not match "test.Example.com".
+#
+# More than one match string can be provided by using semicolons to
+# separate the strings (e.g., example.org;example.com). When multiple
+# strings are specified, a match with any one of the values is considered
+# a sufficient match for the certificate, i.e., the conditions are ORed
+# together.
+# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters
+# (string with field-value pairs, e.g., "peapver=0" or
+# "peapver=1 peaplabel=1")
+# 'peapver' can be used to force which PEAP version (0 or 1) is used.
+# 'peaplabel=1' can be used to force new label, "client PEAP encryption",
+# to be used during key derivation when PEAPv1 or newer. Most existing
+# PEAPv1 implementation seem to be using the old label, "client EAP
+# encryption", and wpa_supplicant is now using that as the default value.
+# Some servers, e.g., Radiator, may require peaplabel=1 configuration to
+# interoperate with PEAPv1; see eap_testing.txt for more details.
+# 'peap_outer_success=0' can be used to terminate PEAP authentication on
+# tunneled EAP-Success. This is required with some RADIUS servers that
+# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g.,
+# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode)
+# include_tls_length=1 can be used to force wpa_supplicant to include
+# TLS Message Length field in all TLS messages even if they are not
+# fragmented.
+# sim_min_num_chal=3 can be used to configure EAP-SIM to require three
+# challenges (by default, it accepts 2 or 3)
+# result_ind=1 can be used to enable EAP-SIM and EAP-AKA to use
+# protected result indication.
+# 'crypto_binding' option can be used to control PEAPv0 cryptobinding
+# behavior:
+# * 0 = do not use cryptobinding (default)
+# * 1 = use cryptobinding if server supports it
+# * 2 = require cryptobinding
+# EAP-WSC (WPS) uses following options: pin=<Device Password> or
+# pbc=1.
+#
+# For wired IEEE 802.1X authentication, "allow_canned_success=1" can be
+# used to configure a mode that allows EAP-Success (and EAP-Failure)
+# without going through authentication step. Some switches use such
+# sequence when forcing the port to be authorized/unauthorized or as a
+# fallback option if the authentication server is unreachable. By default,
+# wpa_supplicant discards such frames to protect against potential attacks
+# by rogue devices, but this option can be used to disable that protection
+# for cases where the server/authenticator does not need to be
+# authenticated.
+# phase2: Phase2 (inner authentication with TLS tunnel) parameters
+# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or
+# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS). "mschapv2_retry=0" can be
+# used to disable MSCHAPv2 password retry in authentication failure cases.
+#
+# TLS-based methods can use the following parameters to control TLS behavior
+# (these are normally in the phase1 parameter, but can be used also in the
+# phase2 parameter when EAP-TLS is used within the inner tunnel):
+# tls_allow_md5=1 - allow MD5-based certificate signatures (depending on the
+# TLS library, these may be disabled by default to enforce stronger
+# security)
+# tls_disable_time_checks=1 - ignore certificate validity time (this requests
+# the TLS library to accept certificates even if they are not currently
+# valid, i.e., have expired or have not yet become valid; this should be
+# used only for testing purposes)
+# tls_disable_session_ticket=1 - disable TLS Session Ticket extension
+# tls_disable_session_ticket=0 - allow TLS Session Ticket extension to be used
+# Note: If not set, this is automatically set to 1 for EAP-TLS/PEAP/TTLS
+# as a workaround for broken authentication server implementations unless
+# EAP workarounds are disabled with eap_workaround=0.
+# For EAP-FAST, this must be set to 0 (or left unconfigured for the
+# default value to be used automatically).
+# tls_disable_tlsv1_0=1 - disable use of TLSv1.0
+# tls_disable_tlsv1_0=0 - explicitly enable use of TLSv1.0 (this allows
+# systemwide TLS policies to be overridden)
+# tls_disable_tlsv1_1=1 - disable use of TLSv1.1 (a workaround for AAA servers
+# that have issues interoperating with updated TLS version)
+# tls_disable_tlsv1_1=0 - explicitly enable use of TLSv1.1 (this allows
+# systemwide TLS policies to be overridden)
+# tls_disable_tlsv1_2=1 - disable use of TLSv1.2 (a workaround for AAA servers
+# that have issues interoperating with updated TLS version)
+# tls_disable_tlsv1_2=0 - explicitly enable use of TLSv1.2 (this allows
+# systemwide TLS policies to be overridden)
+# tls_disable_tlsv1_3=1 - disable use of TLSv1.3 (a workaround for AAA servers
+# that have issues interoperating with updated TLS version)
+# tls_disable_tlsv1_3=0 - enable TLSv1.3 (experimental - disabled by default)
+# tls_ext_cert_check=0 - No external server certificate validation (default)
+# tls_ext_cert_check=1 - External server certificate validation enabled; this
+# requires an external program doing validation of server certificate
+# chain when receiving CTRL-RSP-EXT_CERT_CHECK event from the control
+# interface and report the result of the validation with
+# CTRL-RSP_EXT_CERT_CHECK.
+# tls_suiteb=0 - do not apply Suite B 192-bit constraints on TLS (default)
+# tls_suiteb=1 - apply Suite B 192-bit constraints on TLS; this is used in
+# particular when using Suite B with RSA keys of >= 3K (3072) bits
+#
+# Following certificate/private key fields are used in inner Phase2
+# authentication when using EAP-TTLS or EAP-PEAP.
+# ca_cert2: File path to CA certificate file. This file can have one or more
+# trusted CA certificates. If ca_cert2 and ca_path2 are not included,
+# server certificate will not be verified. This is insecure and a trusted
+# CA certificate should always be configured.
+# ca_path2: Directory path for CA certificate files (PEM)
+# client_cert2: File path to client certificate file
+# private_key2: File path to client private key file
+# private_key2_passwd: Password for private key file
+# dh_file2: File path to DH/DSA parameters file (in PEM format)
+# subject_match2: Substring to be matched against the subject of the
+# authentication server certificate. See subject_match for more details.
+# altsubject_match2: Semicolon separated string of entries to be matched
+# against the alternative subject name of the authentication server
+# certificate. See altsubject_match documentation for more details.
+# domain_suffix_match2: Constraint for server domain name. See
+# domain_suffix_match for more details.
+# ocsp2: See ocsp for more details.
+#
+# Separate machine credentials can be configured for EAP-TEAP Phase 2 with
+# "machine_" prefix (e.g., "machine_identity") in the configuration parameters.
+# See the parameters without that prefix for more details on the meaning and
+# format of each such parameter.
+#
+# fragment_size: Maximum EAP fragment size in bytes (default 1398).
+# This value limits the fragment size for EAP methods that support
+# fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set
+# small enough to make the EAP messages fit in MTU of the network
+# interface used for EAPOL. The default value is suitable for most
+# cases.
+#
+# ocsp: Whether to use/require OCSP to check server certificate
+# 0 = do not use OCSP stapling (TLS certificate status extension)
+# 1 = try to use OCSP stapling, but not require response
+# 2 = require valid OCSP stapling response
+# 3 = require valid OCSP stapling response for all not-trusted
+# certificates in the server certificate chain
+#
+# openssl_ciphers: OpenSSL specific cipher configuration
+# This can be used to override the global openssl_ciphers configuration
+# parameter (see above).
+#
+# erp: Whether EAP Re-authentication Protocol (ERP) is enabled
+#
+# EAP-FAST variables:
+# pac_file: File path for the PAC entries. wpa_supplicant will need to be able
+# to create this file and write updates to it when PAC is being
+# provisioned or refreshed. Full path to the file should be used since
+# working directory may change when wpa_supplicant is run in the
+# background. Alternatively, a named configuration blob can be used by
+# setting this to blob://<blob name>
+# phase1: fast_provisioning option can be used to enable in-line provisioning
+# of EAP-FAST credentials (PAC):
+# 0 = disabled,
+# 1 = allow unauthenticated provisioning,
+# 2 = allow authenticated provisioning,
+# 3 = allow both unauthenticated and authenticated provisioning
+# fast_max_pac_list_len=<num> option can be used to set the maximum
+# number of PAC entries to store in a PAC list (default: 10)
+# fast_pac_format=binary option can be used to select binary format for
+# storing PAC entries in order to save some space (the default
+# text format uses about 2.5 times the size of minimal binary
+# format)
+#
+# wpa_supplicant supports number of "EAP workarounds" to work around
+# interoperability issues with incorrectly behaving authentication servers.
+# These are enabled by default because some of the issues are present in large
+# number of authentication servers. Strict EAP conformance mode can be
+# configured by disabling workarounds with eap_workaround=0.
+
+# update_identifier: PPS MO ID
+# (Hotspot 2.0 PerProviderSubscription/UpdateIdentifier)
+#
+# roaming_consortium_selection: Roaming Consortium Selection
+# The matching Roaming Consortium OI that was used to generate this
+# network profile.
+
+# Station inactivity limit
+#
+# If a station does not send anything in ap_max_inactivity seconds, an
+# empty data frame is sent to it in order to verify whether it is
+# still in range. If this frame is not ACKed, the station will be
+# disassociated and then deauthenticated. This feature is used to
+# clear station table of old entries when the STAs move out of the
+# range.
+#
+# The station can associate again with the AP if it is still in range;
+# this inactivity poll is just used as a nicer way of verifying
+# inactivity; i.e., client will not report broken connection because
+# disassociation frame is not sent immediately without first polling
+# the STA with a data frame.
+# default: 300 (i.e., 5 minutes)
+#ap_max_inactivity=300
+
+# DTIM period in Beacon intervals for AP mode (default: 2)
+#dtim_period=2
+
+# Beacon interval (default: 100 TU)
+#beacon_int=100
+
+# WPS in AP mode
+# 0 = WPS enabled and configured (default)
+# 1 = WPS disabled
+#wps_disabled=0
+
+# FILS DH Group
+# 0 = PFS disabled with FILS shared key authentication (default)
+# 1-65535 = DH Group to use for FILS PFS
+#fils_dh_group=0
+
+# DPP PFS
+# 0: allow PFS to be used or not used (default)
+# 1: require PFS to be used (note: not compatible with DPP R1)
+# 2: do not allow PFS to be used
+#dpp_pfs=0
+
+# Whether beacon protection is enabled
+# This depends on management frame protection (ieee80211w) being enabled and
+# beacon protection support indication from the driver.
+# 0 = disabled (default)
+# 1 = enabled
+#beacon_prot=0
+
+# OWE DH Group
+# 0: use default (19) first and then try all supported groups one by one if AP
+# rejects the selected group
+# 1-65535: DH Group to use for OWE
+# Groups 19 (NIST P-256), 20 (NIST P-384), and 21 (NIST P-521) are
+# currently supported.
+#owe_group=0
+
+# OWE-only mode (disable transition mode)
+# 0: enable transition mode (allow connection to either OWE or open BSS)
+# 1 = disable transition mode (allow connection only with OWE)
+#owe_only=0
+
+# OWE PTK derivation workaround
+# Initial OWE implementation used SHA256 when deriving the PTK for all
+# OWE groups. This was supposed to change to SHA384 for group 20 and
+# SHA512 for group 21. This parameter can be used to enable older
+# behavior mainly for testing purposes. There is no impact to group 19
+# behavior, but if enabled, this will make group 20 and 21 cases use
+# SHA256-based PTK derivation which will not work with the updated
+# OWE implementation on the AP side.
+#owe_ptk_workaround=0
+
+# Transition Disable indication
+# The AP can notify authenticated stations to disable transition mode
+# in their network profiles when the network has completed transition
+# steps, i.e., once sufficiently large number of APs in the ESS have
+# been updated to support the more secure alternative. When this
+# indication is used, the stations are expected to automatically
+# disable transition mode and less secure security options. This
+# includes use of WEP, TKIP (including use of TKIP as the group
+# cipher), and connections without PMF.
+# Bitmap bits:
+# bit 0 (0x01): WPA3-Personal (i.e., disable WPA2-Personal = WPA-PSK
+# and only allow SAE to be used)
+# bit 1 (0x02): SAE-PK (disable SAE without use of SAE-PK)
+# bit 2 (0x04): WPA3-Enterprise (move to requiring PMF)
+# bit 3 (0x08): Enhanced Open (disable use of open network; require
+# OWE)
+
+# SAE-PK mode
+# 0: automatic SAE/SAE-PK selection based on password; enable
+# transition mode (allow SAE authentication without SAE-PK)
+# 1: SAE-PK only (disable transition mode; allow SAE authentication
+# only with SAE-PK)
+# 2: disable SAE-PK (allow SAE authentication only without SAE-PK)
+#sae_pk=0
+
+# MAC address policy
+# 0 = use permanent MAC address
+# 1 = use random MAC address for each ESS connection
+# 2 = like 1, but maintain OUI (with local admin bit set)
+#mac_addr=0
+
+# disable_ht: Whether HT (802.11n) should be disabled.
+# 0 = HT enabled (if AP supports it)
+# 1 = HT disabled
+#
+# disable_ht40: Whether HT-40 (802.11n) should be disabled.
+# 0 = HT-40 enabled (if AP supports it)
+# 1 = HT-40 disabled
+#
+# disable_sgi: Whether SGI (short guard interval) should be disabled.
+# 0 = SGI enabled (if AP supports it)
+# 1 = SGI disabled
+#
+# disable_ldpc: Whether LDPC should be disabled.
+# 0 = LDPC enabled (if AP supports it)
+# 1 = LDPC disabled
+#
+# ht40_intolerant: Whether 40 MHz intolerant should be indicated.
+# 0 = 40 MHz tolerant (default)
+# 1 = 40 MHz intolerant
+#
+# ht_mcs: Configure allowed MCS rates.
+# Parsed as an array of bytes, in base-16 (ascii-hex)
+# ht_mcs="" // Use all available (default)
+# ht_mcs="0xff 00 00 00 00 00 00 00 00 00 " // Use MCS 0-7 only
+# ht_mcs="0xff ff 00 00 00 00 00 00 00 00 " // Use MCS 0-15 only
+#
+# disable_max_amsdu: Whether MAX_AMSDU should be disabled.
+# -1 = Do not make any changes.
+# 0 = Enable MAX-AMSDU if hardware supports it.
+# 1 = Disable AMSDU
+#
+# ampdu_factor: Maximum A-MPDU Length Exponent
+# Value: 0-3, see 7.3.2.56.3 in IEEE Std 802.11n-2009.
+#
+# ampdu_density: Allow overriding AMPDU density configuration.
+# Treated as hint by the kernel.
+# -1 = Do not make any changes.
+# 0-3 = Set AMPDU density (aka factor) to specified value.
+#
+# tx_stbc: Allow overriding STBC support for TX streams
+# Value: 0-1, see IEEE Std 802.11-2016, 9.4.2.56.2.
+# -1 = Do not make any changes (default)
+# 0 = Set if not supported
+# 1 = Set if supported
+#
+# rx_stbc: Allow overriding STBC support for RX streams
+# Value: 0-3, see IEEE Std 802.11-2016, 9.4.2.56.2.
+# -1 = Do not make any changes (default)
+# 0 = Set if not supported
+# 1 = Set for support of one spatial stream
+# 2 = Set for support of one and two spatial streams
+# 3 = Set for support of one, two and three spatial streams
+
+# disable_vht: Whether VHT should be disabled.
+# 0 = VHT enabled (if AP supports it)
+# 1 = VHT disabled
+#
+# vht_capa: VHT capabilities to set in the override
+# vht_capa_mask: mask of VHT capabilities
+#
+# vht_rx_mcs_nss_1/2/3/4/5/6/7/8: override the MCS set for RX NSS 1-8
+# vht_tx_mcs_nss_1/2/3/4/5/6/7/8: override the MCS set for TX NSS 1-8
+# 0: MCS 0-7
+# 1: MCS 0-8
+# 2: MCS 0-9
+# 3: not supported
+
+# multi_ap_backhaul_sta: Multi-AP backhaul STA functionality
+# 0 = normal STA (default)
+# 1 = backhaul STA
+# A backhaul STA sends the Multi-AP IE, fails to associate if the AP does not
+# support Multi-AP, and sets 4-address mode if it does. Thus, the netdev can be
+# added to a bridge to allow forwarding frames over this backhaul link.
+
+##### Fast Session Transfer (FST) support #####################################
+#
+# The options in this section are only available when the build configuration
+# option CONFIG_FST is set while compiling wpa_supplicant. They allow this
+# interface to be a part of FST setup.
+#
+# FST is the transfer of a session from a channel to another channel, in the
+# same or different frequency bands.
+#
+# For details, see IEEE Std 802.11ad-2012.
+
+# Identifier of an FST Group the interface belongs to.
+#fst_group_id=bond0
+
+# Interface priority within the FST Group.
+# Announcing a higher priority for an interface means declaring it more
+# preferable for FST switch.
+# fst_priority is in 1..255 range with 1 being the lowest priority.
+#fst_priority=100
+
+# Default LLT value for this interface in milliseconds. The value used in case
+# no value provided during session setup. Default is 50 msec.
+# fst_llt is in 1..4294967 range (due to spec limitation, see 10.32.2.2
+# Transitioning between states).
+#fst_llt=100
+
+# BSS Transition Management
+# disable_btm - Disable BSS transition management in STA
+# Set to 0 to enable BSS transition management (default behavior)
+# Set to 1 to disable BSS transition management
+#disable_btm=0
+
+# Enable EDMG capability in STA/AP mode, default value is false
+#enable_edmg=1
+
+# This value is used to configure the channel bonding feature.
+# Default value is 0.
+# Relevant only if enable_edmg is true
+# In AP mode it defines the EDMG channel to use for AP operation.
+# In STA mode it defines the EDMG channel for connection (if supported by AP).
+#edmg_channel=9
+
+# Example blocks:
+
+# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers
+network={
+ ssid="simple"
+ psk="very secret passphrase"
+ priority=5
+}
+
+# Same as previous, but request SSID-specific scanning (for APs that reject
+# broadcast SSID)
+network={
+ ssid="second ssid"
+ scan_ssid=1
+ psk="very secret passphrase"
+ priority=2
+}
+
+# Only WPA-PSK is used. Any valid cipher combination is accepted.
+network={
+ ssid="example"
+ proto=WPA
+ key_mgmt=WPA-PSK
+ pairwise=CCMP TKIP
+ group=CCMP TKIP WEP104 WEP40
+ psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
+ priority=2
+}
+
+# WPA-Personal(PSK) with TKIP and enforcement for frequent PTK rekeying
+network={
+ ssid="example"
+ proto=WPA
+ key_mgmt=WPA-PSK
+ pairwise=TKIP
+ group=TKIP
+ psk="not so secure passphrase"
+ wpa_ptk_rekey=600
+}
+
+# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104
+# or WEP40 as the group cipher will not be accepted.
+network={
+ ssid="example"
+ proto=RSN
+ key_mgmt=WPA-EAP
+ pairwise=CCMP TKIP
+ group=CCMP TKIP
+ eap=TLS
+ identity="user@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+ priority=1
+}
+
+# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel
+# (e.g., Radiator)
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=PEAP
+ identity="user@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ phase1="peaplabel=1"
+ phase2="auth=MSCHAPV2"
+ priority=10
+}
+
+# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the
+# unencrypted use. Real identity is sent only within an encrypted TLS tunnel.
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ identity="user@example.com"
+ anonymous_identity="anonymous@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ priority=2
+}
+
+# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted
+# use. Real identity is sent only within an encrypted TLS tunnel.
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ identity="user@example.com"
+ anonymous_identity="anonymous@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ phase2="auth=MSCHAPV2"
+}
+
+# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner
+# authentication.
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ # Phase1 / outer authentication
+ anonymous_identity="anonymous@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ # Phase 2 / inner authentication
+ phase2="autheap=TLS"
+ ca_cert2="/etc/cert/ca2.pem"
+ client_cert2="/etc/cer/user.pem"
+ private_key2="/etc/cer/user.prv"
+ private_key2_passwd="password"
+ priority=2
+}
+
+# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and
+# group cipher.
+network={
+ ssid="example"
+ bssid=00:11:22:33:44:55
+ proto=WPA RSN
+ key_mgmt=WPA-PSK WPA-EAP
+ pairwise=CCMP
+ group=CCMP
+ psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
+}
+
+# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP
+# and all valid ciphers.
+network={
+ ssid=00010203
+ psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
+}
+
+
+# EAP-SIM with a GSM SIM or USIM
+network={
+ ssid="eap-sim-test"
+ key_mgmt=WPA-EAP
+ eap=SIM
+ pin="1234"
+ pcsc=""
+}
+
+
+# EAP-PSK
+network={
+ ssid="eap-psk-test"
+ key_mgmt=WPA-EAP
+ eap=PSK
+ anonymous_identity="eap_psk_user"
+ password=06b4be19da289f475aa46a33cb793029
+ identity="eap_psk_user@example.com"
+}
+
+
+# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using
+# EAP-TLS for authentication and key generation; require both unicast and
+# broadcast WEP keys.
+network={
+ ssid="1x-test"
+ key_mgmt=IEEE8021X
+ eap=TLS
+ identity="user@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+ eapol_flags=3
+}
+
+
+# LEAP with dynamic WEP keys
+network={
+ ssid="leap-example"
+ key_mgmt=IEEE8021X
+ eap=LEAP
+ identity="user"
+ password="foobar"
+}
+
+# EAP-IKEv2 using shared secrets for both server and peer authentication
+network={
+ ssid="ikev2-example"
+ key_mgmt=WPA-EAP
+ eap=IKEV2
+ identity="user"
+ password="foobar"
+}
+
+# EAP-FAST with WPA (WPA or WPA2)
+network={
+ ssid="eap-fast-test"
+ key_mgmt=WPA-EAP
+ eap=FAST
+ anonymous_identity="FAST-000102030405"
+ identity="username"
+ password="password"
+ phase1="fast_provisioning=1"
+ pac_file="/etc/wpa_supplicant.eap-fast-pac"
+}
+
+network={
+ ssid="eap-fast-test"
+ key_mgmt=WPA-EAP
+ eap=FAST
+ anonymous_identity="FAST-000102030405"
+ identity="username"
+ password="password"
+ phase1="fast_provisioning=1"
+ pac_file="blob://eap-fast-pac"
+}
+
+# Plaintext connection (no WPA, no IEEE 802.1X)
+network={
+ ssid="plaintext-test"
+ key_mgmt=NONE
+}
+
+
+# Shared WEP key connection (no WPA, no IEEE 802.1X)
+network={
+ ssid="static-wep-test"
+ key_mgmt=NONE
+ wep_key0="abcde"
+ wep_key1=0102030405
+ wep_key2="1234567890123"
+ wep_tx_keyidx=0
+ priority=5
+}
+
+
+# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key
+# IEEE 802.11 authentication
+network={
+ ssid="static-wep-test2"
+ key_mgmt=NONE
+ wep_key0="abcde"
+ wep_key1=0102030405
+ wep_key2="1234567890123"
+ wep_tx_keyidx=0
+ priority=5
+ auth_alg=SHARED
+}
+
+
+# IBSS/ad-hoc network with RSN
+network={
+ ssid="ibss-rsn"
+ key_mgmt=WPA-PSK
+ proto=RSN
+ psk="12345678"
+ mode=1
+ frequency=2412
+ pairwise=CCMP
+ group=CCMP
+}
+
+# IBSS/ad-hoc network with WPA-None/TKIP (deprecated)
+network={
+ ssid="test adhoc"
+ mode=1
+ frequency=2412
+ proto=WPA
+ key_mgmt=WPA-NONE
+ pairwise=NONE
+ group=TKIP
+ psk="secret passphrase"
+}
+
+# open mesh network
+network={
+ ssid="test mesh"
+ mode=5
+ frequency=2437
+ key_mgmt=NONE
+}
+
+# secure (SAE + AMPE) network
+network={
+ ssid="secure mesh"
+ mode=5
+ frequency=2437
+ key_mgmt=SAE
+ psk="very secret passphrase"
+}
+
+
+# Catch all example that allows more or less all configuration modes
+network={
+ ssid="example"
+ scan_ssid=1
+ key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
+ pairwise=CCMP TKIP
+ group=CCMP TKIP WEP104 WEP40
+ psk="very secret passphrase"
+ eap=TTLS PEAP TLS
+ identity="user@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+ phase1="peaplabel=0"
+}
+
+# Example of EAP-TLS with smartcard (openssl engine)
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TLS
+ proto=RSN
+ pairwise=CCMP TKIP
+ group=CCMP TKIP
+ identity="user@example.com"
+ ca_cert="/etc/cert/ca.pem"
+
+ # Certificate and/or key identified by PKCS#11 URI (RFC7512)
+ client_cert="pkcs11:manufacturer=piv_II;id=%01"
+ private_key="pkcs11:manufacturer=piv_II;id=%01"
+
+ # Optional PIN configuration; this can be left out and PIN will be
+ # asked through the control interface
+ pin="1234"
+}
+
+# Example configuration showing how to use an inlined blob as a CA certificate
+# data instead of using external file
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ identity="user@example.com"
+ anonymous_identity="anonymous@example.com"
+ password="foobar"
+ ca_cert="blob://exampleblob"
+ priority=20
+}
+
+blob-base64-exampleblob={
+SGVsbG8gV29ybGQhCg==
+}
+
+
+# Wildcard match for SSID (plaintext APs only). This example select any
+# open AP regardless of its SSID.
+network={
+ key_mgmt=NONE
+}
+
+# Example configuration ignoring two APs - these will be ignored
+# for this network.
+network={
+ ssid="example"
+ psk="very secret passphrase"
+ bssid_ignore=02:11:22:33:44:55 02:22:aa:44:55:66
+}
+
+# Example configuration limiting AP selection to a specific set of APs;
+# any other AP not matching the masked address will be ignored.
+network={
+ ssid="example"
+ psk="very secret passphrase"
+ bssid_accept=02:55:ae:bc:00:00/ff:ff:ff:ff:00:00 00:00:77:66:55:44/00:00:ff:ff:ff:ff
+}
+
+# Example config file that will only scan on channel 36.
+freq_list=5180
+network={
+ key_mgmt=NONE
+}
+
+
+# Example configuration using EAP-TTLS for authentication and key
+# generation for MACsec
+network={
+ key_mgmt=IEEE8021X
+ eap=TTLS
+ phase2="auth=PAP"
+ anonymous_identity="anonymous@example.com"
+ identity="user@example.com"
+ password="secretr"
+ ca_cert="/etc/cert/ca.pem"
+ eapol_flags=0
+ macsec_policy=1
+}
+
+# Example configuration for MACsec with preshared key
+network={
+ key_mgmt=NONE
+ eapol_flags=0
+ macsec_policy=1
+ mka_cak=0123456789ABCDEF0123456789ABCDEF
+ mka_ckn=6162636465666768696A6B6C6D6E6F707172737475767778797A303132333435
+ mka_priority=128
+}
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_supplicant_conf.sh b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_supplicant_conf.sh
new file mode 100755
index 0000000..f36eef1
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_supplicant_conf.sh
@@ -0,0 +1,16 @@
+#!/bin/bash
+#
+# Copyright (C) 2010 The Android Open Source Project
+#
+# This software may be distributed under the terms of the BSD license.
+# See README for more details.
+#
+
+# Generate a wpa_supplicant.conf from the template.
+# $1: the template file name
+if [ -n "$WIFI_DRIVER_SOCKET_IFACE" ]
+then
+ sed -e 's/#.*$//' -e 's/[ \t]*$//' -e '/^$/d' < $1 | sed -e "s/wlan0/$WIFI_DRIVER_SOCKET_IFACE/"
+else
+ sed -e 's/#.*$//' -e 's/[ \t]*$//' -e '/^$/d' < $1
+fi
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_supplicant_i.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_supplicant_i.h
new file mode 100755
index 0000000..8bb8672
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_supplicant_i.h
@@ -0,0 +1,1890 @@
+/*
+ * wpa_supplicant - Internal definitions
+ * Copyright (c) 2003-2014, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPA_SUPPLICANT_I_H
+#define WPA_SUPPLICANT_I_H
+
+#include "utils/bitfield.h"
+#include "utils/list.h"
+#include "common/defs.h"
+#include "common/sae.h"
+#include "common/wpa_ctrl.h"
+#include "crypto/sha384.h"
+#include "eapol_supp/eapol_supp_sm.h"
+#include "wps/wps_defs.h"
+#include "config_ssid.h"
+#include "wmm_ac.h"
+
+extern const char *const wpa_supplicant_version;
+extern const char *const wpa_supplicant_license;
+#ifndef CONFIG_NO_STDOUT_DEBUG
+extern const char *const wpa_supplicant_full_license1;
+extern const char *const wpa_supplicant_full_license2;
+extern const char *const wpa_supplicant_full_license3;
+extern const char *const wpa_supplicant_full_license4;
+extern const char *const wpa_supplicant_full_license5;
+#endif /* CONFIG_NO_STDOUT_DEBUG */
+
+struct wpa_sm;
+struct wpa_supplicant;
+struct ibss_rsn;
+struct scan_info;
+struct wpa_bss;
+struct wpa_scan_results;
+struct hostapd_hw_modes;
+struct wpa_driver_associate_params;
+struct wpa_cred;
+
+/*
+ * Forward declarations of private structures used within the ctrl_iface
+ * backends. Other parts of wpa_supplicant do not have access to data stored in
+ * these structures.
+ */
+struct ctrl_iface_priv;
+struct ctrl_iface_global_priv;
+struct wpas_dbus_priv;
+struct wpas_binder_priv;
+
+/**
+ * struct wpa_interface - Parameters for wpa_supplicant_add_iface()
+ */
+struct wpa_interface {
+ /**
+ * confname - Configuration name (file or profile) name
+ *
+ * This can also be %NULL when a configuration file is not used. In
+ * that case, ctrl_interface must be set to allow the interface to be
+ * configured.
+ */
+ const char *confname;
+
+ /**
+ * confanother - Additional configuration name (file or profile) name
+ *
+ * This can also be %NULL when the additional configuration file is not
+ * used.
+ */
+ const char *confanother;
+
+ /**
+ * ctrl_interface - Control interface parameter
+ *
+ * If a configuration file is not used, this variable can be used to
+ * set the ctrl_interface parameter that would have otherwise been read
+ * from the configuration file. If both confname and ctrl_interface are
+ * set, ctrl_interface is used to override the value from configuration
+ * file.
+ */
+ const char *ctrl_interface;
+
+ /**
+ * driver - Driver interface name, or %NULL to use the default driver
+ */
+ const char *driver;
+
+ /**
+ * driver_param - Driver interface parameters
+ *
+ * If a configuration file is not used, this variable can be used to
+ * set the driver_param parameters that would have otherwise been read
+ * from the configuration file. If both confname and driver_param are
+ * set, driver_param is used to override the value from configuration
+ * file.
+ */
+ const char *driver_param;
+
+ /**
+ * ifname - Interface name
+ */
+ const char *ifname;
+
+ /**
+ * bridge_ifname - Optional bridge interface name
+ *
+ * If the driver interface (ifname) is included in a Linux bridge
+ * device, the bridge interface may need to be used for receiving EAPOL
+ * frames. This can be enabled by setting this variable to enable
+ * receiving of EAPOL frames from an additional interface.
+ */
+ const char *bridge_ifname;
+
+ /**
+ * p2p_mgmt - Interface used for P2P management (P2P Device operations)
+ *
+ * Indicates whether wpas_p2p_init() must be called for this interface.
+ * This is used only when the driver supports a dedicated P2P Device
+ * interface that is not a network interface.
+ */
+ int p2p_mgmt;
+
+#ifdef CONFIG_MATCH_IFACE
+ /**
+ * matched - Interface was matched rather than specified
+ *
+ */
+ enum {
+ WPA_IFACE_NOT_MATCHED,
+ WPA_IFACE_MATCHED_NULL,
+ WPA_IFACE_MATCHED
+ } matched;
+#endif /* CONFIG_MATCH_IFACE */
+};
+
+/**
+ * struct wpa_params - Parameters for wpa_supplicant_init()
+ */
+struct wpa_params {
+ /**
+ * daemonize - Run %wpa_supplicant in the background
+ */
+ int daemonize;
+
+ /**
+ * wait_for_monitor - Wait for a monitor program before starting
+ */
+ int wait_for_monitor;
+
+ /**
+ * pid_file - Path to a PID (process ID) file
+ *
+ * If this and daemonize are set, process ID of the background process
+ * will be written to the specified file.
+ */
+ char *pid_file;
+
+ /**
+ * wpa_debug_level - Debugging verbosity level (e.g., MSG_INFO)
+ */
+ int wpa_debug_level;
+
+ /**
+ * wpa_debug_show_keys - Whether keying material is included in debug
+ *
+ * This parameter can be used to allow keying material to be included
+ * in debug messages. This is a security risk and this option should
+ * not be enabled in normal configuration. If needed during
+ * development or while troubleshooting, this option can provide more
+ * details for figuring out what is happening.
+ */
+ int wpa_debug_show_keys;
+
+ /**
+ * wpa_debug_timestamp - Whether to include timestamp in debug messages
+ */
+ int wpa_debug_timestamp;
+
+ /**
+ * ctrl_interface - Global ctrl_iface path/parameter
+ */
+ char *ctrl_interface;
+
+ /**
+ * ctrl_interface_group - Global ctrl_iface group
+ */
+ char *ctrl_interface_group;
+
+ /**
+ * dbus_ctrl_interface - Enable the DBus control interface
+ */
+ int dbus_ctrl_interface;
+
+ /**
+ * wpa_debug_file_path - Path of debug file or %NULL to use stdout
+ */
+ const char *wpa_debug_file_path;
+
+ /**
+ * wpa_debug_syslog - Enable log output through syslog
+ */
+ int wpa_debug_syslog;
+
+ /**
+ * wpa_debug_tracing - Enable log output through Linux tracing
+ */
+ int wpa_debug_tracing;
+
+ /**
+ * override_driver - Optional driver parameter override
+ *
+ * This parameter can be used to override the driver parameter in
+ * dynamic interface addition to force a specific driver wrapper to be
+ * used instead.
+ */
+ char *override_driver;
+
+ /**
+ * override_ctrl_interface - Optional ctrl_interface override
+ *
+ * This parameter can be used to override the ctrl_interface parameter
+ * in dynamic interface addition to force a control interface to be
+ * created.
+ */
+ char *override_ctrl_interface;
+
+ /**
+ * entropy_file - Optional entropy file
+ *
+ * This parameter can be used to configure wpa_supplicant to maintain
+ * its internal entropy store over restarts.
+ */
+ char *entropy_file;
+
+#ifdef CONFIG_P2P
+ /**
+ * conf_p2p_dev - Configuration file used to hold the
+ * P2P Device configuration parameters.
+ *
+ * This can also be %NULL. In such a case, if a P2P Device dedicated
+ * interfaces is created, the main configuration file will be used.
+ */
+ char *conf_p2p_dev;
+#endif /* CONFIG_P2P */
+
+#ifdef CONFIG_MATCH_IFACE
+ /**
+ * match_ifaces - Interface descriptions to match
+ */
+ struct wpa_interface *match_ifaces;
+
+ /**
+ * match_iface_count - Number of defined matching interfaces
+ */
+ int match_iface_count;
+#endif /* CONFIG_MATCH_IFACE */
+};
+
+struct p2p_srv_bonjour {
+ struct dl_list list;
+ struct wpabuf *query;
+ struct wpabuf *resp;
+};
+
+struct p2p_srv_upnp {
+ struct dl_list list;
+ u8 version;
+ char *service;
+};
+
+/**
+ * struct wpa_global - Internal, global data for all %wpa_supplicant interfaces
+ *
+ * This structure is initialized by calling wpa_supplicant_init() when starting
+ * %wpa_supplicant.
+ */
+struct wpa_global {
+ struct wpa_supplicant *ifaces;
+ struct wpa_params params;
+ struct ctrl_iface_global_priv *ctrl_iface;
+ struct wpas_dbus_priv *dbus;
+ struct wpas_binder_priv *binder;
+ void **drv_priv;
+ size_t drv_count;
+ struct os_time suspend_time;
+ struct p2p_data *p2p;
+ struct wpa_supplicant *p2p_init_wpa_s;
+ struct wpa_supplicant *p2p_group_formation;
+ struct wpa_supplicant *p2p_invite_group;
+ u8 p2p_dev_addr[ETH_ALEN];
+ struct os_reltime p2p_go_wait_client;
+ struct dl_list p2p_srv_bonjour; /* struct p2p_srv_bonjour */
+ struct dl_list p2p_srv_upnp; /* struct p2p_srv_upnp */
+ int p2p_disabled;
+ int cross_connection;
+ int p2p_long_listen; /* remaining time in long Listen state in ms */
+ struct wpa_freq_range_list p2p_disallow_freq;
+ struct wpa_freq_range_list p2p_go_avoid_freq;
+ enum wpa_conc_pref {
+ WPA_CONC_PREF_NOT_SET,
+ WPA_CONC_PREF_STA,
+ WPA_CONC_PREF_P2P
+ } conc_pref;
+ unsigned int p2p_per_sta_psk:1;
+ unsigned int p2p_fail_on_wps_complete:1;
+ unsigned int p2p_24ghz_social_channels:1;
+ unsigned int pending_p2ps_group:1;
+ unsigned int pending_group_iface_for_p2ps:1;
+ unsigned int pending_p2ps_group_freq;
+
+#ifdef CONFIG_WIFI_DISPLAY
+ int wifi_display;
+#define MAX_WFD_SUBELEMS 12
+ struct wpabuf *wfd_subelem[MAX_WFD_SUBELEMS];
+#endif /* CONFIG_WIFI_DISPLAY */
+
+ struct psk_list_entry *add_psk; /* From group formation */
+};
+
+
+/**
+ * struct wpa_radio - Internal data for per-radio information
+ *
+ * This structure is used to share data about configured interfaces
+ * (struct wpa_supplicant) that share the same physical radio, e.g., to allow
+ * better coordination of offchannel operations.
+ */
+struct wpa_radio {
+ char name[16]; /* from driver_ops get_radio_name() or empty if not
+ * available */
+ /** NULL if no external scan running. */
+ struct wpa_supplicant *external_scan_req_interface;
+ unsigned int num_active_works;
+ struct dl_list ifaces; /* struct wpa_supplicant::radio_list entries */
+ struct dl_list work; /* struct wpa_radio_work::list entries */
+};
+
+/**
+ * Checks whether an external scan is running on a given radio.
+ * @radio: Pointer to radio struct
+ * Returns: true if an external scan is running, false otherwise.
+ */
+static inline bool external_scan_running(struct wpa_radio *radio)
+{
+ return radio && radio->external_scan_req_interface;
+}
+
+#define MAX_ACTIVE_WORKS 2
+
+
+/**
+ * struct wpa_radio_work - Radio work item
+ */
+struct wpa_radio_work {
+ struct dl_list list;
+ unsigned int freq; /* known frequency (MHz) or 0 for multiple/unknown */
+ const char *type;
+ struct wpa_supplicant *wpa_s;
+ void (*cb)(struct wpa_radio_work *work, int deinit);
+ void *ctx;
+ unsigned int started:1;
+ struct os_reltime time;
+ unsigned int bands;
+};
+
+int radio_add_work(struct wpa_supplicant *wpa_s, unsigned int freq,
+ const char *type, int next,
+ void (*cb)(struct wpa_radio_work *work, int deinit),
+ void *ctx);
+void radio_work_done(struct wpa_radio_work *work);
+void radio_remove_works(struct wpa_supplicant *wpa_s,
+ const char *type, int remove_all);
+void radio_remove_pending_work(struct wpa_supplicant *wpa_s, void *ctx);
+void radio_work_check_next(struct wpa_supplicant *wpa_s);
+struct wpa_radio_work *
+radio_work_pending(struct wpa_supplicant *wpa_s, const char *type);
+
+struct wpa_connect_work {
+ unsigned int sme:1;
+ unsigned int bss_removed:1;
+ struct wpa_bss *bss;
+ struct wpa_ssid *ssid;
+};
+
+int wpas_valid_bss_ssid(struct wpa_supplicant *wpa_s, struct wpa_bss *test_bss,
+ struct wpa_ssid *test_ssid);
+void wpas_connect_work_free(struct wpa_connect_work *cwork);
+void wpas_connect_work_done(struct wpa_supplicant *wpa_s);
+
+struct wpa_external_work {
+ unsigned int id;
+ char type[100];
+ unsigned int timeout;
+};
+
+enum wpa_radio_work_band wpas_freq_to_band(int freq);
+unsigned int wpas_get_bands(struct wpa_supplicant *wpa_s, const int *freqs);
+
+/**
+ * offchannel_send_action_result - Result of offchannel send Action frame
+ */
+enum offchannel_send_action_result {
+ OFFCHANNEL_SEND_ACTION_SUCCESS /**< Frame was send and acknowledged */,
+ OFFCHANNEL_SEND_ACTION_NO_ACK /**< Frame was sent, but not acknowledged
+ */,
+ OFFCHANNEL_SEND_ACTION_FAILED /**< Frame was not sent due to a failure
+ */
+};
+
+struct wps_ap_info {
+ u8 bssid[ETH_ALEN];
+ enum wps_ap_info_type {
+ WPS_AP_NOT_SEL_REG,
+ WPS_AP_SEL_REG,
+ WPS_AP_SEL_REG_OUR
+ } type;
+ unsigned int tries;
+ struct os_reltime last_attempt;
+ unsigned int pbc_active;
+ u8 uuid[WPS_UUID_LEN];
+};
+
+#define WPA_FREQ_USED_BY_INFRA_STATION BIT(0)
+#define WPA_FREQ_USED_BY_P2P_CLIENT BIT(1)
+
+struct wpa_used_freq_data {
+ int freq;
+ unsigned int flags;
+};
+
+#define RRM_NEIGHBOR_REPORT_TIMEOUT 1 /* 1 second for AP to send a report */
+
+/*
+ * struct rrm_data - Data used for managing RRM features
+ */
+struct rrm_data {
+ /* rrm_used - indication regarding the current connection */
+ unsigned int rrm_used:1;
+
+ /*
+ * notify_neighbor_rep - Callback for notifying report requester
+ */
+ void (*notify_neighbor_rep)(void *ctx, struct wpabuf *neighbor_rep);
+
+ /*
+ * neighbor_rep_cb_ctx - Callback context
+ * Received in the callback registration, and sent to the callback
+ * function as a parameter.
+ */
+ void *neighbor_rep_cb_ctx;
+
+ /* next_neighbor_rep_token - Next request's dialog token */
+ u8 next_neighbor_rep_token;
+
+ /* token - Dialog token of the current radio measurement */
+ u8 token;
+
+ /* destination address of the current radio measurement request */
+ u8 dst_addr[ETH_ALEN];
+};
+
+enum wpa_supplicant_test_failure {
+ WPAS_TEST_FAILURE_NONE,
+ WPAS_TEST_FAILURE_SCAN_TRIGGER,
+};
+
+struct icon_entry {
+ struct dl_list list;
+ u8 bssid[ETH_ALEN];
+ u8 dialog_token;
+ char *file_name;
+ u8 *image;
+ size_t image_len;
+};
+
+struct wpa_bss_tmp_disallowed {
+ struct dl_list list;
+ u8 bssid[ETH_ALEN];
+ int rssi_threshold;
+};
+
+struct beacon_rep_data {
+ u8 token;
+ u8 last_indication;
+ struct wpa_driver_scan_params scan_params;
+ u8 ssid[SSID_MAX_LEN];
+ size_t ssid_len;
+ u8 bssid[ETH_ALEN];
+ enum beacon_report_detail report_detail;
+ struct bitfield *eids;
+};
+
+
+struct external_pmksa_cache {
+ struct dl_list list;
+ void *pmksa_cache;
+};
+
+struct fils_hlp_req {
+ struct dl_list list;
+ u8 dst[ETH_ALEN];
+ struct wpabuf *pkt;
+};
+
+struct driver_signal_override {
+ struct dl_list list;
+ u8 bssid[ETH_ALEN];
+ int si_current_signal;
+ int si_avg_signal;
+ int si_avg_beacon_signal;
+ int si_current_noise;
+ int scan_level;
+};
+
+struct robust_av_data {
+ u8 dialog_token;
+ enum scs_request_type request_type;
+ u8 up_bitmap;
+ u8 up_limit;
+ u32 stream_timeout;
+ u8 frame_classifier[48];
+ size_t frame_classifier_len;
+ bool valid_config;
+};
+
+struct dscp_policy_status {
+ u8 id;
+ u8 status;
+};
+
+struct dscp_resp_data {
+ bool more;
+ bool reset;
+ bool solicited;
+ struct dscp_policy_status *policy;
+ int num_policies;
+};
+
+#ifdef CONFIG_PASN
+
+struct pasn_fils {
+ u8 nonce[FILS_NONCE_LEN];
+ u8 anonce[FILS_NONCE_LEN];
+ u8 session[FILS_SESSION_LEN];
+ u8 erp_pmkid[PMKID_LEN];
+ bool completed;
+};
+
+struct wpas_pasn {
+ int akmp;
+ int cipher;
+ u16 group;
+ int freq;
+ size_t kdk_len;
+
+ u8 trans_seq;
+ u8 status;
+
+ u8 bssid[ETH_ALEN];
+ size_t pmk_len;
+ u8 pmk[PMK_LEN_MAX];
+ bool using_pmksa;
+
+ u8 hash[SHA384_MAC_LEN];
+
+ struct wpabuf *beacon_rsne_rsnxe;
+ struct wpa_ptk ptk;
+ struct crypto_ecdh *ecdh;
+
+ struct wpabuf *comeback;
+ u16 comeback_after;
+
+#ifdef CONFIG_SAE
+ struct sae_data sae;
+#endif /* CONFIG_SAE */
+
+ struct wpa_ssid *ssid;
+
+#ifdef CONFIG_FILS
+ struct pasn_fils fils;
+#endif /* CONFIG_FILS */
+
+#ifdef CONFIG_IEEE80211R
+ u8 pmk_r1[PMK_LEN_MAX];
+ size_t pmk_r1_len;
+ u8 pmk_r1_name[WPA_PMK_NAME_LEN];
+#endif /* CONFIG_IEEE80211R */
+};
+#endif /* CONFIG_PASN */
+
+
+enum ip_version {
+ IPV4 = 4,
+ IPV6 = 6,
+};
+
+
+struct ipv4_params {
+ struct in_addr src_ip;
+ struct in_addr dst_ip;
+ u16 src_port;
+ u16 dst_port;
+ u8 dscp;
+ u8 protocol;
+ u8 param_mask;
+};
+
+
+struct ipv6_params {
+ struct in6_addr src_ip;
+ struct in6_addr dst_ip;
+ u16 src_port;
+ u16 dst_port;
+ u8 dscp;
+ u8 next_header;
+ u8 flow_label[3];
+ u8 param_mask;
+};
+
+
+struct type4_params {
+ u8 classifier_mask;
+ enum ip_version ip_version;
+ union {
+ struct ipv4_params v4;
+ struct ipv6_params v6;
+ } ip_params;
+};
+
+
+struct type10_params {
+ u8 prot_instance;
+ u8 prot_number;
+ u8 *filter_value;
+ u8 *filter_mask;
+ size_t filter_len;
+};
+
+
+struct tclas_element {
+ u8 user_priority;
+ u8 classifier_type;
+ union {
+ struct type4_params type4_param;
+ struct type10_params type10_param;
+ } frame_classifier;
+};
+
+
+struct scs_desc_elem {
+ u8 scs_id;
+ enum scs_request_type request_type;
+ u8 intra_access_priority;
+ bool scs_up_avail;
+ struct tclas_element *tclas_elems;
+ unsigned int num_tclas_elem;
+ u8 tclas_processing;
+};
+
+
+struct scs_robust_av_data {
+ struct scs_desc_elem *scs_desc_elems;
+ unsigned int num_scs_desc;
+};
+
+
+enum scs_response_status {
+ SCS_DESC_SENT = 0,
+ SCS_DESC_SUCCESS = 1,
+};
+
+
+struct active_scs_elem {
+ struct dl_list list;
+ u8 scs_id;
+ enum scs_response_status status;
+};
+
+
+/**
+ * struct wpa_supplicant - Internal data for wpa_supplicant interface
+ *
+ * This structure contains the internal data for core wpa_supplicant code. This
+ * should be only used directly from the core code. However, a pointer to this
+ * data is used from other files as an arbitrary context pointer in calls to
+ * core functions.
+ */
+struct wpa_supplicant {
+ struct wpa_global *global;
+ struct wpa_radio *radio; /* shared radio context */
+ struct dl_list radio_list; /* list head: struct wpa_radio::ifaces */
+ struct wpa_supplicant *parent;
+ struct wpa_supplicant *p2pdev;
+ struct wpa_supplicant *next;
+ struct l2_packet_data *l2;
+ struct l2_packet_data *l2_br;
+ struct os_reltime roam_start;
+ struct os_reltime roam_time;
+ struct os_reltime session_start;
+ struct os_reltime session_length;
+ unsigned char own_addr[ETH_ALEN];
+ unsigned char perm_addr[ETH_ALEN];
+ char ifname[100];
+#ifdef CONFIG_MATCH_IFACE
+ int matched;
+#endif /* CONFIG_MATCH_IFACE */
+#ifdef CONFIG_CTRL_IFACE_DBUS_NEW
+ char *dbus_new_path;
+ char *dbus_groupobj_path;
+#ifdef CONFIG_AP
+ char *preq_notify_peer;
+#endif /* CONFIG_AP */
+#endif /* CONFIG_CTRL_IFACE_DBUS_NEW */
+#ifdef CONFIG_CTRL_IFACE_BINDER
+ const void *binder_object_key;
+#endif /* CONFIG_CTRL_IFACE_BINDER */
+ char bridge_ifname[16];
+
+ char *confname;
+ char *confanother;
+
+ struct wpa_config *conf;
+ int countermeasures;
+ struct os_reltime last_michael_mic_error;
+ u8 bssid[ETH_ALEN];
+ u8 pending_bssid[ETH_ALEN]; /* If wpa_state == WPA_ASSOCIATING, this
+ * field contains the target BSSID. */
+ int reassociate; /* reassociation requested */
+ bool roam_in_progress; /* roam in progress */
+ unsigned int reassoc_same_bss:1; /* reassociating to the same BSS */
+ unsigned int reassoc_same_ess:1; /* reassociating to the same ESS */
+ int disconnected; /* all connections disabled; i.e., do no reassociate
+ * before this has been cleared */
+ struct wpa_ssid *current_ssid;
+ struct wpa_ssid *last_ssid;
+ struct wpa_bss *current_bss;
+ int ap_ies_from_associnfo;
+ unsigned int assoc_freq;
+ u8 *last_con_fail_realm;
+ size_t last_con_fail_realm_len;
+
+ /* Selected configuration (based on Beacon/ProbeResp WPA IE) */
+ int pairwise_cipher;
+ int deny_ptk0_rekey;
+ int group_cipher;
+ int key_mgmt;
+ int wpa_proto;
+ int mgmt_group_cipher;
+
+ void *drv_priv; /* private data used by driver_ops */
+ void *global_drv_priv;
+
+ u8 *bssid_filter;
+ size_t bssid_filter_count;
+
+ u8 *disallow_aps_bssid;
+ size_t disallow_aps_bssid_count;
+ struct wpa_ssid_value *disallow_aps_ssid;
+ size_t disallow_aps_ssid_count;
+
+ u32 setband_mask;
+
+ /* Preferred network for the next connection attempt */
+ struct wpa_ssid *next_ssid;
+
+ /* previous scan was wildcard when interleaving between
+ * wildcard scans and specific SSID scan when max_ssids=1 */
+ int prev_scan_wildcard;
+ struct wpa_ssid *prev_scan_ssid; /* previously scanned SSID;
+ * NULL = not yet initialized (start
+ * with wildcard SSID)
+ * WILDCARD_SSID_SCAN = wildcard
+ * SSID was used in the previous scan
+ */
+#define WILDCARD_SSID_SCAN ((struct wpa_ssid *) 1)
+
+ struct wpa_ssid *prev_sched_ssid; /* last SSID used in sched scan */
+ int sched_scan_timeout;
+ int first_sched_scan;
+ int sched_scan_timed_out;
+ struct sched_scan_plan *sched_scan_plans;
+ size_t sched_scan_plans_num;
+
+ void (*scan_res_handler)(struct wpa_supplicant *wpa_s,
+ struct wpa_scan_results *scan_res);
+ void (*scan_res_fail_handler)(struct wpa_supplicant *wpa_s);
+ struct dl_list bss; /* struct wpa_bss::list */
+ struct dl_list bss_id; /* struct wpa_bss::list_id */
+ size_t num_bss;
+ unsigned int bss_update_idx;
+ unsigned int bss_next_id;
+
+ /*
+ * Pointers to BSS entries in the order they were in the last scan
+ * results.
+ */
+ struct wpa_bss **last_scan_res;
+ size_t last_scan_res_used;
+ size_t last_scan_res_size;
+ struct os_reltime last_scan;
+
+ const struct wpa_driver_ops *driver;
+ int interface_removed; /* whether the network interface has been
+ * removed */
+ struct wpa_sm *wpa;
+ struct ptksa_cache *ptksa;
+
+ struct eapol_sm *eapol;
+
+ struct ctrl_iface_priv *ctrl_iface;
+
+ enum wpa_states wpa_state;
+ struct wpa_radio_work *scan_work;
+ int scanning;
+ int sched_scanning;
+ unsigned int sched_scan_stop_req:1;
+ int new_connection;
+
+ int eapol_received; /* number of EAPOL packets received after the
+ * previous association event */
+
+ u8 rsnxe[20];
+ size_t rsnxe_len;
+
+ struct scard_data *scard;
+ char imsi[20];
+ int mnc_len;
+
+ unsigned char last_eapol_src[ETH_ALEN];
+
+ unsigned int keys_cleared; /* bitfield of key indexes that the driver is
+ * known not to be configured with a key */
+
+ struct wpa_bssid_ignore *bssid_ignore;
+
+ /* Number of connection failures since last successful connection */
+ unsigned int consecutive_conn_failures;
+
+ /**
+ * scan_req - Type of the scan request
+ */
+ enum scan_req_type {
+ /**
+ * NORMAL_SCAN_REQ - Normal scan request
+ *
+ * This is used for scans initiated by wpa_supplicant to find an
+ * AP for a connection.
+ */
+ NORMAL_SCAN_REQ,
+
+ /**
+ * INITIAL_SCAN_REQ - Initial scan request
+ *
+ * This is used for the first scan on an interface to force at
+ * least one scan to be run even if the configuration does not
+ * include any enabled networks.
+ */
+ INITIAL_SCAN_REQ,
+
+ /**
+ * MANUAL_SCAN_REQ - Manual scan request
+ *
+ * This is used for scans where the user request a scan or
+ * a specific wpa_supplicant operation (e.g., WPS) requires scan
+ * to be run.
+ */
+ MANUAL_SCAN_REQ
+ } scan_req, last_scan_req;
+ enum wpa_states scan_prev_wpa_state;
+ struct os_reltime scan_trigger_time, scan_start_time;
+ /* Minimum freshness requirement for connection purposes */
+ struct os_reltime scan_min_time;
+ int scan_runs; /* number of scan runs since WPS was started */
+ int *next_scan_freqs;
+ int *select_network_scan_freqs;
+ int *manual_scan_freqs;
+ int *manual_sched_scan_freqs;
+ unsigned int manual_scan_passive:1;
+ unsigned int manual_scan_use_id:1;
+ unsigned int manual_scan_only_new:1;
+ unsigned int own_scan_requested:1;
+ unsigned int own_scan_running:1;
+ unsigned int clear_driver_scan_cache:1;
+ unsigned int manual_scan_id;
+ int scan_interval; /* time in sec between scans to find suitable AP */
+ int normal_scans; /* normal scans run before sched_scan */
+ int scan_for_connection; /* whether the scan request was triggered for
+ * finding a connection */
+ /*
+ * A unique cookie representing the vendor scan request. This cookie is
+ * returned from the driver interface. 0 indicates that there is no
+ * pending vendor scan request.
+ */
+ u64 curr_scan_cookie;
+#define MAX_SCAN_ID 16
+ int scan_id[MAX_SCAN_ID];
+ unsigned int scan_id_count;
+ u8 next_scan_bssid[ETH_ALEN];
+ unsigned int next_scan_bssid_wildcard_ssid:1;
+
+ struct wpa_ssid_value *ssids_from_scan_req;
+ unsigned int num_ssids_from_scan_req;
+ int *last_scan_freqs;
+ unsigned int num_last_scan_freqs;
+ unsigned int suitable_network;
+ unsigned int no_suitable_network;
+
+ u64 drv_flags;
+ u64 drv_flags2;
+ unsigned int drv_enc;
+ unsigned int drv_rrm_flags;
+
+ /*
+ * A bitmap of supported protocols for probe response offload. See
+ * struct wpa_driver_capa in driver.h
+ */
+ unsigned int probe_resp_offloads;
+
+ /* extended capabilities supported by the driver */
+ const u8 *extended_capa, *extended_capa_mask;
+ unsigned int extended_capa_len;
+
+ int max_scan_ssids;
+ int max_sched_scan_ssids;
+ unsigned int max_sched_scan_plans;
+ unsigned int max_sched_scan_plan_interval;
+ unsigned int max_sched_scan_plan_iterations;
+ int sched_scan_supported;
+ unsigned int max_match_sets;
+ unsigned int max_remain_on_chan;
+ unsigned int max_stations;
+
+ int pending_mic_error_report;
+ int pending_mic_error_pairwise;
+ int mic_errors_seen; /* Michael MIC errors with the current PTK */
+
+ struct wps_context *wps;
+ int wps_success; /* WPS success event received */
+ struct wps_er *wps_er;
+ unsigned int wps_run;
+ struct os_reltime wps_pin_start_time;
+ bool bssid_ignore_cleared;
+
+ struct wpabuf *pending_eapol_rx;
+ struct os_reltime pending_eapol_rx_time;
+ u8 pending_eapol_rx_src[ETH_ALEN];
+ unsigned int last_eapol_matches_bssid:1;
+ unsigned int eap_expected_failure:1;
+ unsigned int reattach:1; /* reassociation to the same BSS requested */
+ unsigned int mac_addr_changed:1;
+ unsigned int added_vif:1;
+ unsigned int wnmsleep_used:1;
+ unsigned int owe_transition_select:1;
+ unsigned int owe_transition_search:1;
+ unsigned int connection_set:1;
+ unsigned int connection_ht:1;
+ unsigned int connection_vht:1;
+ unsigned int connection_he:1;
+ unsigned int disable_mbo_oce:1;
+
+ struct os_reltime last_mac_addr_change;
+ int last_mac_addr_style;
+
+ struct ibss_rsn *ibss_rsn;
+
+ int set_sta_uapsd;
+ int sta_uapsd;
+ int set_ap_uapsd;
+ int ap_uapsd;
+ int auth_alg;
+ u16 last_owe_group;
+
+#ifdef CONFIG_SME
+ struct {
+ u8 ssid[SSID_MAX_LEN];
+ size_t ssid_len;
+ int freq;
+ u8 assoc_req_ie[1500];
+ size_t assoc_req_ie_len;
+ int mfp;
+ int ft_used;
+ u8 mobility_domain[2];
+ u8 *ft_ies;
+ size_t ft_ies_len;
+ u8 prev_bssid[ETH_ALEN];
+ int prev_bssid_set;
+ int auth_alg;
+ int proto;
+
+ int sa_query_count; /* number of pending SA Query requests;
+ * 0 = no SA Query in progress */
+ int sa_query_timed_out;
+ u8 *sa_query_trans_id; /* buffer of WLAN_SA_QUERY_TR_ID_LEN *
+ * sa_query_count octets of pending
+ * SA Query transaction identifiers */
+ struct os_reltime sa_query_start;
+ struct os_reltime last_unprot_disconnect;
+ enum { HT_SEC_CHAN_UNKNOWN,
+ HT_SEC_CHAN_ABOVE,
+ HT_SEC_CHAN_BELOW } ht_sec_chan;
+ u8 sched_obss_scan;
+ u16 obss_scan_int;
+ u16 bss_max_idle_period;
+#ifdef CONFIG_SAE
+ struct sae_data sae;
+ struct wpabuf *sae_token;
+ int sae_group_index;
+ unsigned int sae_pmksa_caching:1;
+ u16 seq_num;
+ u8 ext_auth_bssid[ETH_ALEN];
+ u8 ext_auth_ssid[SSID_MAX_LEN];
+ size_t ext_auth_ssid_len;
+ int *sae_rejected_groups;
+#endif /* CONFIG_SAE */
+ } sme;
+#endif /* CONFIG_SME */
+
+#ifdef CONFIG_AP
+ struct hostapd_iface *ap_iface;
+ void (*ap_configured_cb)(void *ctx, void *data);
+ void *ap_configured_cb_ctx;
+ void *ap_configured_cb_data;
+#endif /* CONFIG_AP */
+
+ struct hostapd_iface *ifmsh;
+#ifdef CONFIG_MESH
+ struct mesh_rsn *mesh_rsn;
+ int mesh_if_idx;
+ unsigned int mesh_if_created:1;
+ unsigned int mesh_ht_enabled:1;
+ unsigned int mesh_vht_enabled:1;
+ unsigned int mesh_he_enabled:1;
+ struct wpa_driver_mesh_join_params *mesh_params;
+#ifdef CONFIG_PMKSA_CACHE_EXTERNAL
+ /* struct external_pmksa_cache::list */
+ struct dl_list mesh_external_pmksa_cache;
+#endif /* CONFIG_PMKSA_CACHE_EXTERNAL */
+#endif /* CONFIG_MESH */
+
+ unsigned int off_channel_freq;
+ struct wpabuf *pending_action_tx;
+ u8 pending_action_src[ETH_ALEN];
+ u8 pending_action_dst[ETH_ALEN];
+ u8 pending_action_bssid[ETH_ALEN];
+ unsigned int pending_action_freq;
+ int pending_action_no_cck;
+ int pending_action_without_roc;
+ unsigned int pending_action_tx_done:1;
+ void (*pending_action_tx_status_cb)(struct wpa_supplicant *wpa_s,
+ unsigned int freq, const u8 *dst,
+ const u8 *src, const u8 *bssid,
+ const u8 *data, size_t data_len,
+ enum offchannel_send_action_result
+ result);
+ unsigned int roc_waiting_drv_freq;
+ int action_tx_wait_time;
+ int action_tx_wait_time_used;
+
+ int p2p_mgmt;
+
+#ifdef CONFIG_P2P
+ struct p2p_go_neg_results *go_params;
+ int create_p2p_iface;
+ u8 pending_interface_addr[ETH_ALEN];
+ char pending_interface_name[100];
+ int pending_interface_type;
+ int p2p_group_idx;
+ unsigned int pending_listen_freq;
+ unsigned int pending_listen_duration;
+ enum {
+ NOT_P2P_GROUP_INTERFACE,
+ P2P_GROUP_INTERFACE_PENDING,
+ P2P_GROUP_INTERFACE_GO,
+ P2P_GROUP_INTERFACE_CLIENT
+ } p2p_group_interface;
+ struct p2p_group *p2p_group;
+ char p2p_pin[10];
+ int p2p_wps_method;
+ u8 p2p_auth_invite[ETH_ALEN];
+ int p2p_sd_over_ctrl_iface;
+ int p2p_in_provisioning;
+ int p2p_in_invitation;
+ int p2p_invite_go_freq;
+ int pending_invite_ssid_id;
+ int show_group_started;
+ u8 go_dev_addr[ETH_ALEN];
+ int pending_pd_before_join;
+ u8 pending_join_iface_addr[ETH_ALEN];
+ u8 pending_join_dev_addr[ETH_ALEN];
+ int pending_join_wps_method;
+ u8 p2p_join_ssid[SSID_MAX_LEN];
+ size_t p2p_join_ssid_len;
+ int p2p_join_scan_count;
+ int auto_pd_scan_retry;
+ int force_long_sd;
+ u16 pending_pd_config_methods;
+ enum {
+ NORMAL_PD, AUTO_PD_GO_NEG, AUTO_PD_JOIN, AUTO_PD_ASP
+ } pending_pd_use;
+
+ /*
+ * Whether cross connection is disallowed by the AP to which this
+ * interface is associated (only valid if there is an association).
+ */
+ int cross_connect_disallowed;
+
+ /*
+ * Whether this P2P group is configured to use cross connection (only
+ * valid if this is P2P GO interface). The actual cross connect packet
+ * forwarding may not be configured depending on the uplink status.
+ */
+ int cross_connect_enabled;
+
+ /* Whether cross connection forwarding is in use at the moment. */
+ int cross_connect_in_use;
+
+ /*
+ * Uplink interface name for cross connection
+ */
+ char cross_connect_uplink[100];
+
+ unsigned int p2p_auto_join:1;
+ unsigned int p2p_auto_pd:1;
+ unsigned int p2p_go_do_acs:1;
+ unsigned int p2p_persistent_group:1;
+ unsigned int p2p_fallback_to_go_neg:1;
+ unsigned int p2p_pd_before_go_neg:1;
+ unsigned int p2p_go_ht40:1;
+ unsigned int p2p_go_vht:1;
+ unsigned int p2p_go_edmg:1;
+ unsigned int p2p_go_he:1;
+ unsigned int user_initiated_pd:1;
+ unsigned int p2p_go_group_formation_completed:1;
+ unsigned int group_formation_reported:1;
+ unsigned int waiting_presence_resp;
+ int p2p_first_connection_timeout;
+ unsigned int p2p_nfc_tag_enabled:1;
+ unsigned int p2p_peer_oob_pk_hash_known:1;
+ unsigned int p2p_disable_ip_addr_req:1;
+ unsigned int p2ps_method_config_any:1;
+ unsigned int p2p_cli_probe:1;
+ unsigned int p2p_go_allow_dfs:1;
+ enum hostapd_hw_mode p2p_go_acs_band;
+ int p2p_persistent_go_freq;
+ int p2p_persistent_id;
+ int p2p_go_intent;
+ int p2p_connect_freq;
+ struct os_reltime p2p_auto_started;
+ struct wpa_ssid *p2p_last_4way_hs_fail;
+ struct wpa_radio_work *p2p_scan_work;
+ struct wpa_radio_work *p2p_listen_work;
+ struct wpa_radio_work *p2p_send_action_work;
+
+ u16 p2p_oob_dev_pw_id; /* OOB Device Password Id for group formation */
+ struct wpabuf *p2p_oob_dev_pw; /* OOB Device Password for group
+ * formation */
+ u8 p2p_peer_oob_pubkey_hash[WPS_OOB_PUBKEY_HASH_LEN];
+ u8 p2p_ip_addr_info[3 * 4];
+
+ /* group common frequencies */
+ int *p2p_group_common_freqs;
+ unsigned int p2p_group_common_freqs_num;
+ u8 p2ps_join_addr[ETH_ALEN];
+
+ unsigned int p2p_go_max_oper_chwidth;
+ unsigned int p2p_go_vht_center_freq2;
+ int p2p_lo_started;
+#endif /* CONFIG_P2P */
+
+ struct wpa_ssid *bgscan_ssid;
+ const struct bgscan_ops *bgscan;
+ void *bgscan_priv;
+
+ const struct autoscan_ops *autoscan;
+ struct wpa_driver_scan_params *autoscan_params;
+ void *autoscan_priv;
+
+ struct wpa_ssid *connect_without_scan;
+
+ struct wps_ap_info *wps_ap;
+ size_t num_wps_ap;
+ int wps_ap_iter;
+
+ int after_wps;
+ int known_wps_freq;
+ unsigned int wps_freq;
+ int wps_fragment_size;
+ int auto_reconnect_disabled;
+
+ /* Channel preferences for AP/P2P GO use */
+ int best_24_freq;
+ int best_5_freq;
+ int best_overall_freq;
+
+ struct gas_query *gas;
+ struct gas_server *gas_server;
+
+#ifdef CONFIG_INTERWORKING
+ unsigned int fetch_anqp_in_progress:1;
+ unsigned int network_select:1;
+ unsigned int auto_select:1;
+ unsigned int auto_network_select:1;
+ unsigned int interworking_fast_assoc_tried:1;
+ unsigned int fetch_all_anqp:1;
+ unsigned int fetch_osu_info:1;
+ unsigned int fetch_osu_waiting_scan:1;
+ unsigned int fetch_osu_icon_in_progress:1;
+ struct wpa_bss *interworking_gas_bss;
+ unsigned int osu_icon_id;
+ struct dl_list icon_head; /* struct icon_entry */
+ struct osu_provider *osu_prov;
+ size_t osu_prov_count;
+ struct os_reltime osu_icon_fetch_start;
+ unsigned int num_osu_scans;
+ unsigned int num_prov_found;
+#endif /* CONFIG_INTERWORKING */
+ unsigned int drv_capa_known;
+
+ struct {
+ struct hostapd_hw_modes *modes;
+ u16 num_modes;
+ u16 flags;
+ } hw;
+ enum local_hw_capab {
+ CAPAB_NO_HT_VHT,
+ CAPAB_HT,
+ CAPAB_HT40,
+ CAPAB_VHT,
+ } hw_capab;
+#ifdef CONFIG_MACSEC
+ struct ieee802_1x_kay *kay;
+#endif /* CONFIG_MACSEC */
+
+ int pno;
+ int pno_sched_pending;
+
+ /* WLAN_REASON_* reason codes. Negative if locally generated. */
+ int disconnect_reason;
+
+ /* WLAN_STATUS_* status codes from last received Authentication frame
+ * from the AP. */
+ u16 auth_status_code;
+
+ /* WLAN_STATUS_* status codes from (Re)Association Response frame. */
+ u16 assoc_status_code;
+
+ struct ext_password_data *ext_pw;
+
+ struct wpabuf *last_gas_resp, *prev_gas_resp;
+ u8 last_gas_addr[ETH_ALEN], prev_gas_addr[ETH_ALEN];
+ u8 last_gas_dialog_token, prev_gas_dialog_token;
+
+ unsigned int no_keep_alive:1;
+ unsigned int ext_mgmt_frame_handling:1;
+ unsigned int ext_eapol_frame_io:1;
+ unsigned int wmm_ac_supported:1;
+ unsigned int ext_work_in_progress:1;
+ unsigned int own_disconnect_req:1;
+ unsigned int own_reconnect_req:1;
+ unsigned int ignore_post_flush_scan_res:1;
+
+#define MAC_ADDR_RAND_SCAN BIT(0)
+#define MAC_ADDR_RAND_SCHED_SCAN BIT(1)
+#define MAC_ADDR_RAND_PNO BIT(2)
+#define MAC_ADDR_RAND_ALL (MAC_ADDR_RAND_SCAN | \
+ MAC_ADDR_RAND_SCHED_SCAN | \
+ MAC_ADDR_RAND_PNO)
+ unsigned int mac_addr_rand_supported;
+ unsigned int mac_addr_rand_enable;
+
+ /* MAC Address followed by mask (2 * ETH_ALEN) */
+ u8 *mac_addr_scan;
+ u8 *mac_addr_sched_scan;
+ u8 *mac_addr_pno;
+
+#ifdef CONFIG_WNM
+ u8 wnm_dialog_token;
+ u8 wnm_reply;
+ u8 wnm_num_neighbor_report;
+ u8 wnm_mode;
+ u16 wnm_dissoc_timer;
+ u8 wnm_bss_termination_duration[12];
+ struct neighbor_report *wnm_neighbor_report_elements;
+ struct os_reltime wnm_cand_valid_until;
+ u8 wnm_cand_from_bss[ETH_ALEN];
+ enum bss_trans_mgmt_status_code bss_tm_status;
+ bool bss_trans_mgmt_in_progress;
+ struct wpabuf *coloc_intf_elems;
+ u8 coloc_intf_dialog_token;
+ u8 coloc_intf_auto_report;
+ u8 coloc_intf_timeout;
+#ifdef CONFIG_MBO
+ unsigned int wnm_mbo_trans_reason_present:1;
+ u8 wnm_mbo_transition_reason;
+#endif /* CONFIG_MBO */
+#endif /* CONFIG_WNM */
+
+#ifdef CONFIG_TESTING_GET_GTK
+ u8 last_gtk[32];
+ size_t last_gtk_len;
+#endif /* CONFIG_TESTING_GET_GTK */
+
+ unsigned int num_multichan_concurrent;
+ struct wpa_radio_work *connect_work;
+
+ unsigned int ext_work_id;
+
+ struct wpabuf *vendor_elem[NUM_VENDOR_ELEM_FRAMES];
+
+#ifdef CONFIG_TESTING_OPTIONS
+ struct l2_packet_data *l2_test;
+ unsigned int extra_roc_dur;
+ enum wpa_supplicant_test_failure test_failure;
+ char *get_pref_freq_list_override;
+ unsigned int reject_btm_req_reason;
+ unsigned int p2p_go_csa_on_inv:1;
+ unsigned int ignore_auth_resp:1;
+ unsigned int ignore_assoc_disallow:1;
+ unsigned int disable_sa_query:1;
+ unsigned int testing_resend_assoc:1;
+ unsigned int ignore_sae_h2e_only:1;
+ int ft_rsnxe_used;
+ struct wpabuf *sae_commit_override;
+ enum wpa_alg last_tk_alg;
+ u8 last_tk_addr[ETH_ALEN];
+ int last_tk_key_idx;
+ u8 last_tk[WPA_TK_MAX_LEN];
+ size_t last_tk_len;
+ struct wpabuf *last_assoc_req_wpa_ie;
+ int *extra_sae_rejected_groups;
+ struct wpabuf *rsne_override_eapol;
+ struct wpabuf *rsnxe_override_assoc;
+ struct wpabuf *rsnxe_override_eapol;
+ struct dl_list drv_signal_override;
+ unsigned int oci_freq_override_eapol;
+ unsigned int oci_freq_override_saquery_req;
+ unsigned int oci_freq_override_saquery_resp;
+ unsigned int oci_freq_override_eapol_g2;
+ unsigned int oci_freq_override_ft_assoc;
+ unsigned int oci_freq_override_fils_assoc;
+ unsigned int oci_freq_override_wnm_sleep;
+#endif /* CONFIG_TESTING_OPTIONS */
+
+ struct wmm_ac_assoc_data *wmm_ac_assoc_info;
+ struct wmm_tspec_element *tspecs[WMM_AC_NUM][TS_DIR_IDX_COUNT];
+ struct wmm_ac_addts_request *addts_request;
+ u8 wmm_ac_last_dialog_token;
+ struct wmm_tspec_element *last_tspecs;
+ u8 last_tspecs_count;
+
+ struct rrm_data rrm;
+ struct beacon_rep_data beacon_rep_data;
+
+#ifdef CONFIG_FST
+ struct fst_iface *fst;
+ const struct wpabuf *fst_ies;
+ struct wpabuf *received_mb_ies;
+#endif /* CONFIG_FST */
+
+#ifdef CONFIG_MBO
+ /* Multiband operation non-preferred channel */
+ struct wpa_mbo_non_pref_channel {
+ enum mbo_non_pref_chan_reason reason;
+ u8 oper_class;
+ u8 chan;
+ u8 preference;
+ } *non_pref_chan;
+ size_t non_pref_chan_num;
+ u8 mbo_wnm_token;
+ /**
+ * enable_oce - Enable OCE if it is enabled by user and device also
+ * supports OCE.
+ * User can enable OCE with wpa_config's 'oce' parameter as follows -
+ * - Set BIT(0) to enable OCE in non-AP STA mode.
+ * - Set BIT(1) to enable OCE in STA-CFON mode.
+ */
+ u8 enable_oce;
+#endif /* CONFIG_MBO */
+
+ /*
+ * This should be under CONFIG_MBO, but it is left out to allow using
+ * the bss_temp_disallowed list for other purposes as well.
+ */
+ struct dl_list bss_tmp_disallowed;
+
+ /*
+ * Content of a measurement report element with type 8 (LCI),
+ * own location.
+ */
+ struct wpabuf *lci;
+ struct os_reltime lci_time;
+
+ struct os_reltime beacon_rep_scan;
+
+ /* FILS HLP requests (struct fils_hlp_req) */
+ struct dl_list fils_hlp_req;
+
+ struct sched_scan_relative_params {
+ /**
+ * relative_rssi_set - Enable relatively preferred BSS reporting
+ *
+ * 0 = Disable reporting relatively preferred BSSs
+ * 1 = Enable reporting relatively preferred BSSs
+ */
+ int relative_rssi_set;
+
+ /**
+ * relative_rssi - Relative RSSI for reporting better BSSs
+ *
+ * Amount of RSSI by which a BSS should be better than the
+ * current connected BSS so that the new BSS can be reported
+ * to user space. This applies to sched_scan operations.
+ */
+ int relative_rssi;
+
+ /**
+ * relative_adjust_band - Band in which RSSI is to be adjusted
+ */
+ enum set_band relative_adjust_band;
+
+ /**
+ * relative_adjust_rssi - RSSI adjustment
+ *
+ * An amount of relative_adjust_rssi should be added to the
+ * BSSs that belong to the relative_adjust_band while comparing
+ * with other bands for BSS reporting.
+ */
+ int relative_adjust_rssi;
+ } srp;
+
+ /* RIC elements for FT protocol */
+ struct wpabuf *ric_ies;
+
+ int last_auth_timeout_sec;
+
+#ifdef CONFIG_DPP
+ struct dpp_global *dpp;
+ struct dpp_authentication *dpp_auth;
+ struct wpa_radio_work *dpp_listen_work;
+ unsigned int dpp_pending_listen_freq;
+ unsigned int dpp_listen_freq;
+ struct os_reltime dpp_listen_end;
+ u8 dpp_allowed_roles;
+ int dpp_qr_mutual;
+ int dpp_netrole;
+ int dpp_auth_ok_on_ack;
+ int dpp_in_response_listen;
+ int dpp_gas_client;
+ int dpp_gas_dialog_token;
+ u8 dpp_intro_bssid[ETH_ALEN];
+ void *dpp_intro_network;
+ struct dpp_pkex *dpp_pkex;
+ struct dpp_bootstrap_info *dpp_pkex_bi;
+ char *dpp_pkex_code;
+ char *dpp_pkex_identifier;
+ char *dpp_pkex_auth_cmd;
+ char *dpp_configurator_params;
+ struct os_reltime dpp_last_init;
+ struct os_reltime dpp_init_iter_start;
+ unsigned int dpp_init_max_tries;
+ unsigned int dpp_init_retry_time;
+ unsigned int dpp_resp_wait_time;
+ unsigned int dpp_resp_max_tries;
+ unsigned int dpp_resp_retry_time;
+ u8 dpp_last_ssid[SSID_MAX_LEN];
+ size_t dpp_last_ssid_len;
+ bool dpp_conf_backup_received;
+#ifdef CONFIG_DPP2
+ struct dpp_pfs *dpp_pfs;
+ int dpp_pfs_fallback;
+ struct wpabuf *dpp_presence_announcement;
+ struct dpp_bootstrap_info *dpp_chirp_bi;
+ int dpp_chirp_freq;
+ int *dpp_chirp_freqs;
+ int dpp_chirp_iter;
+ int dpp_chirp_round;
+ int dpp_chirp_scan_done;
+ int dpp_chirp_listen;
+ struct wpa_ssid *dpp_reconfig_ssid;
+ int dpp_reconfig_ssid_id;
+ struct dpp_reconfig_id *dpp_reconfig_id;
+#endif /* CONFIG_DPP2 */
+#ifdef CONFIG_TESTING_OPTIONS
+ char *dpp_config_obj_override;
+ char *dpp_discovery_override;
+ char *dpp_groups_override;
+ unsigned int dpp_ignore_netaccesskey_mismatch:1;
+#endif /* CONFIG_TESTING_OPTIONS */
+#endif /* CONFIG_DPP */
+
+#ifdef CONFIG_FILS
+ unsigned int disable_fils:1;
+#endif /* CONFIG_FILS */
+ unsigned int ieee80211ac:1;
+ unsigned int enabled_4addr_mode:1;
+ unsigned int multi_bss_support:1;
+ unsigned int drv_authorized_port:1;
+ unsigned int multi_ap_ie:1;
+ unsigned int multi_ap_backhaul:1;
+ unsigned int multi_ap_fronthaul:1;
+ struct robust_av_data robust_av;
+ bool mscs_setup_done;
+
+#ifdef CONFIG_PASN
+ struct wpas_pasn pasn;
+ struct wpa_radio_work *pasn_auth_work;
+#endif /* CONFIG_PASN */
+ struct scs_robust_av_data scs_robust_av_req;
+ u8 scs_dialog_token;
+#ifdef CONFIG_TESTING_OPTIONS
+ unsigned int disable_scs_support:1;
+ unsigned int disable_mscs_support:1;
+#endif /* CONFIG_TESTING_OPTIONS */
+ struct dl_list active_scs_ids;
+ bool ongoing_scs_req;
+ u8 dscp_req_dialog_token;
+ u8 dscp_query_dialog_token;
+ unsigned int enable_dscp_policy_capa:1;
+ unsigned int connection_dscp:1;
+ unsigned int wait_for_dscp_req:1;
+};
+
+
+/* wpa_supplicant.c */
+void wpa_supplicant_apply_ht_overrides(
+ struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid,
+ struct wpa_driver_associate_params *params);
+void wpa_supplicant_apply_vht_overrides(
+ struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid,
+ struct wpa_driver_associate_params *params);
+void wpa_supplicant_apply_he_overrides(
+ struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid,
+ struct wpa_driver_associate_params *params);
+
+int wpa_set_wep_keys(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid);
+int wpa_supplicant_set_wpa_none_key(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+
+int wpa_supplicant_reload_configuration(struct wpa_supplicant *wpa_s);
+
+const char * wpa_supplicant_state_txt(enum wpa_states state);
+int wpa_supplicant_update_mac_addr(struct wpa_supplicant *wpa_s);
+int wpa_supplicant_driver_init(struct wpa_supplicant *wpa_s);
+int wpa_supplicant_update_bridge_ifname(struct wpa_supplicant *wpa_s,
+ const char *bridge_ifname);
+void wpas_set_mgmt_group_cipher(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid, struct wpa_ie_data *ie);
+int wpa_supplicant_set_suites(struct wpa_supplicant *wpa_s,
+ struct wpa_bss *bss, struct wpa_ssid *ssid,
+ u8 *wpa_ie, size_t *wpa_ie_len);
+int wpas_restore_permanent_mac_addr(struct wpa_supplicant *wpa_s);
+void wpa_supplicant_associate(struct wpa_supplicant *wpa_s,
+ struct wpa_bss *bss,
+ struct wpa_ssid *ssid);
+void wpa_supplicant_set_non_wpa_policy(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void wpa_supplicant_initiate_eapol(struct wpa_supplicant *wpa_s);
+void wpa_clear_keys(struct wpa_supplicant *wpa_s, const u8 *addr);
+void wpa_supplicant_req_auth_timeout(struct wpa_supplicant *wpa_s,
+ int sec, int usec);
+void wpas_auth_timeout_restart(struct wpa_supplicant *wpa_s, int sec_diff);
+void wpa_supplicant_reinit_autoscan(struct wpa_supplicant *wpa_s);
+void wpa_supplicant_set_state(struct wpa_supplicant *wpa_s,
+ enum wpa_states state);
+struct wpa_ssid * wpa_supplicant_get_ssid(struct wpa_supplicant *wpa_s);
+const char * wpa_supplicant_get_eap_mode(struct wpa_supplicant *wpa_s);
+void wpa_supplicant_cancel_auth_timeout(struct wpa_supplicant *wpa_s);
+void wpa_supplicant_deauthenticate(struct wpa_supplicant *wpa_s,
+ u16 reason_code);
+void wpa_supplicant_reconnect(struct wpa_supplicant *wpa_s);
+
+struct wpa_ssid * wpa_supplicant_add_network(struct wpa_supplicant *wpa_s);
+int wpa_supplicant_remove_network(struct wpa_supplicant *wpa_s, int id);
+int wpa_supplicant_remove_all_networks(struct wpa_supplicant *wpa_s);
+void wpa_supplicant_enable_network(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void wpa_supplicant_disable_network(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void wpa_supplicant_select_network(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+int wpas_remove_cred(struct wpa_supplicant *wpa_s, struct wpa_cred *cred);
+int wpas_remove_all_creds(struct wpa_supplicant *wpa_s);
+int wpas_set_pkcs11_engine_and_module_path(struct wpa_supplicant *wpa_s,
+ const char *pkcs11_engine_path,
+ const char *pkcs11_module_path);
+int wpa_supplicant_set_ap_scan(struct wpa_supplicant *wpa_s,
+ int ap_scan);
+int wpa_supplicant_set_bss_expiration_age(struct wpa_supplicant *wpa_s,
+ unsigned int expire_age);
+int wpa_supplicant_set_bss_expiration_count(struct wpa_supplicant *wpa_s,
+ unsigned int expire_count);
+int wpa_supplicant_set_scan_interval(struct wpa_supplicant *wpa_s,
+ int scan_interval);
+int wpa_supplicant_set_debug_params(struct wpa_global *global,
+ int debug_level, int debug_timestamp,
+ int debug_show_keys);
+void free_hw_features(struct wpa_supplicant *wpa_s);
+
+void wpa_show_license(void);
+
+struct wpa_interface * wpa_supplicant_match_iface(struct wpa_global *global,
+ const char *ifname);
+struct wpa_supplicant * wpa_supplicant_add_iface(struct wpa_global *global,
+ struct wpa_interface *iface,
+ struct wpa_supplicant *parent);
+int wpa_supplicant_remove_iface(struct wpa_global *global,
+ struct wpa_supplicant *wpa_s,
+ int terminate);
+struct wpa_supplicant * wpa_supplicant_get_iface(struct wpa_global *global,
+ const char *ifname);
+struct wpa_global * wpa_supplicant_init(struct wpa_params *params);
+int wpa_supplicant_run(struct wpa_global *global);
+void wpa_supplicant_deinit(struct wpa_global *global);
+
+int wpa_supplicant_scard_init(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void wpa_supplicant_terminate_proc(struct wpa_global *global);
+void wpa_supplicant_rx_eapol(void *ctx, const u8 *src_addr,
+ const u8 *buf, size_t len);
+void wpa_supplicant_update_config(struct wpa_supplicant *wpa_s);
+void wpa_supplicant_clear_status(struct wpa_supplicant *wpa_s);
+void wpas_connection_failed(struct wpa_supplicant *wpa_s, const u8 *bssid);
+void fils_connection_failure(struct wpa_supplicant *wpa_s);
+void fils_pmksa_cache_flush(struct wpa_supplicant *wpa_s);
+int wpas_driver_bss_selection(struct wpa_supplicant *wpa_s);
+int wpas_is_p2p_prioritized(struct wpa_supplicant *wpa_s);
+void wpas_auth_failed(struct wpa_supplicant *wpa_s, char *reason);
+void wpas_clear_temp_disabled(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid, int clear_failures);
+int disallowed_bssid(struct wpa_supplicant *wpa_s, const u8 *bssid);
+int disallowed_ssid(struct wpa_supplicant *wpa_s, const u8 *ssid,
+ size_t ssid_len);
+void wpas_request_connection(struct wpa_supplicant *wpa_s);
+void wpas_request_disconnection(struct wpa_supplicant *wpa_s);
+int wpas_build_ext_capab(struct wpa_supplicant *wpa_s, u8 *buf, size_t buflen);
+int wpas_update_random_addr(struct wpa_supplicant *wpa_s, int style);
+int wpas_update_random_addr_disassoc(struct wpa_supplicant *wpa_s);
+void add_freq(int *freqs, int *num_freqs, int freq);
+
+int wpas_get_op_chan_phy(int freq, const u8 *ies, size_t ies_len,
+ u8 *op_class, u8 *chan, u8 *phy_type);
+
+int wpas_twt_send_setup(struct wpa_supplicant *wpa_s, u8 dtok, int exponent,
+ int mantissa, u8 min_twt, int setup_cmd, u64 twt,
+ bool requestor, bool trigger, bool implicit,
+ bool flow_type, u8 flow_id, bool protection,
+ u8 twt_channel, u8 control);
+int wpas_twt_send_teardown(struct wpa_supplicant *wpa_s, u8 flags);
+
+void wpas_rrm_reset(struct wpa_supplicant *wpa_s);
+void wpas_rrm_process_neighbor_rep(struct wpa_supplicant *wpa_s,
+ const u8 *report, size_t report_len);
+int wpas_rrm_send_neighbor_rep_request(struct wpa_supplicant *wpa_s,
+ const struct wpa_ssid_value *ssid,
+ int lci, int civic,
+ void (*cb)(void *ctx,
+ struct wpabuf *neighbor_rep),
+ void *cb_ctx);
+void wpas_rrm_handle_radio_measurement_request(struct wpa_supplicant *wpa_s,
+ const u8 *src, const u8 *dst,
+ const u8 *frame, size_t len);
+void wpas_rrm_handle_link_measurement_request(struct wpa_supplicant *wpa_s,
+ const u8 *src,
+ const u8 *frame, size_t len,
+ int rssi);
+void wpas_rrm_refuse_request(struct wpa_supplicant *wpa_s);
+int wpas_beacon_rep_scan_process(struct wpa_supplicant *wpa_s,
+ struct wpa_scan_results *scan_res,
+ struct scan_info *info);
+void wpas_clear_beacon_rep_data(struct wpa_supplicant *wpa_s);
+void wpas_flush_fils_hlp_req(struct wpa_supplicant *wpa_s);
+void wpas_clear_disabled_interface(void *eloop_ctx, void *timeout_ctx);
+void wpa_supplicant_reset_bgscan(struct wpa_supplicant *wpa_s);
+
+
+/* MBO functions */
+int wpas_mbo_ie(struct wpa_supplicant *wpa_s, u8 *buf, size_t len,
+ int add_oce_capa);
+const u8 * mbo_attr_from_mbo_ie(const u8 *mbo_ie, enum mbo_attr_id attr);
+const u8 * wpas_mbo_get_bss_attr(struct wpa_bss *bss, enum mbo_attr_id attr);
+void wpas_mbo_check_pmf(struct wpa_supplicant *wpa_s, struct wpa_bss *bss,
+ struct wpa_ssid *ssid);
+const u8 * mbo_get_attr_from_ies(const u8 *ies, size_t ies_len,
+ enum mbo_attr_id attr);
+int wpas_mbo_update_non_pref_chan(struct wpa_supplicant *wpa_s,
+ const char *non_pref_chan);
+void wpas_mbo_scan_ie(struct wpa_supplicant *wpa_s, struct wpabuf *ie);
+void wpas_mbo_ie_trans_req(struct wpa_supplicant *wpa_s, const u8 *ie,
+ size_t len);
+size_t wpas_mbo_ie_bss_trans_reject(struct wpa_supplicant *wpa_s, u8 *pos,
+ size_t len,
+ enum mbo_transition_reject_reason reason);
+void wpas_mbo_update_cell_capa(struct wpa_supplicant *wpa_s, u8 mbo_cell_capa);
+struct wpabuf * mbo_build_anqp_buf(struct wpa_supplicant *wpa_s,
+ struct wpa_bss *bss, u32 mbo_subtypes);
+void mbo_parse_rx_anqp_resp(struct wpa_supplicant *wpa_s,
+ struct wpa_bss *bss, const u8 *sa,
+ const u8 *data, size_t slen);
+void wpas_update_mbo_connect_params(struct wpa_supplicant *wpa_s);
+
+/* op_classes.c */
+enum chan_allowed {
+ NOT_ALLOWED, NO_IR, RADAR, ALLOWED
+};
+
+enum chan_allowed verify_channel(struct hostapd_hw_modes *mode, u8 op_class,
+ u8 channel, u8 bw);
+size_t wpas_supp_op_class_ie(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid,
+ struct wpa_bss *bss, u8 *pos, size_t len);
+int * wpas_supp_op_classes(struct wpa_supplicant *wpa_s);
+
+int wpas_enable_mac_addr_randomization(struct wpa_supplicant *wpa_s,
+ unsigned int type, const u8 *addr,
+ const u8 *mask);
+int wpas_disable_mac_addr_randomization(struct wpa_supplicant *wpa_s,
+ unsigned int type);
+
+/**
+ * wpa_supplicant_ctrl_iface_ctrl_rsp_handle - Handle a control response
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @ssid: Pointer to the network block the reply is for
+ * @field: field the response is a reply for
+ * @value: value (ie, password, etc) for @field
+ * Returns: 0 on success, non-zero on error
+ *
+ * Helper function to handle replies to control interface requests.
+ */
+int wpa_supplicant_ctrl_iface_ctrl_rsp_handle(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid,
+ const char *field,
+ const char *value);
+
+void ibss_mesh_setup_freq(struct wpa_supplicant *wpa_s,
+ const struct wpa_ssid *ssid,
+ struct hostapd_freq_params *freq);
+
+/* events.c */
+void wpa_supplicant_mark_disassoc(struct wpa_supplicant *wpa_s);
+int wpa_supplicant_connect(struct wpa_supplicant *wpa_s,
+ struct wpa_bss *selected,
+ struct wpa_ssid *ssid);
+void wpa_supplicant_stop_countermeasures(void *eloop_ctx, void *sock_ctx);
+void wpa_supplicant_delayed_mic_error_report(void *eloop_ctx, void *sock_ctx);
+void wnm_bss_keep_alive_deinit(struct wpa_supplicant *wpa_s);
+int wpa_supplicant_fast_associate(struct wpa_supplicant *wpa_s);
+struct wpa_bss * wpa_supplicant_pick_network(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid **selected_ssid);
+int wpas_temp_disabled(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid);
+void wpa_supplicant_update_channel_list(struct wpa_supplicant *wpa_s,
+ struct channel_list_changed *info);
+int wpa_supplicant_need_to_roam_within_ess(struct wpa_supplicant *wpa_s,
+ struct wpa_bss *current_bss,
+ struct wpa_bss *seleceted);
+
+/* eap_register.c */
+int eap_register_methods(void);
+
+/**
+ * Utility method to tell if a given network is for persistent group storage
+ * @ssid: Network object
+ * Returns: 1 if network is a persistent group, 0 otherwise
+ */
+static inline int network_is_persistent_group(struct wpa_ssid *ssid)
+{
+ return ssid->disabled == 2 && ssid->p2p_persistent_group;
+}
+
+
+static inline int wpas_mode_to_ieee80211_mode(enum wpas_mode mode)
+{
+ switch (mode) {
+ default:
+ case WPAS_MODE_INFRA:
+ return IEEE80211_MODE_INFRA;
+ case WPAS_MODE_IBSS:
+ return IEEE80211_MODE_IBSS;
+ case WPAS_MODE_AP:
+ case WPAS_MODE_P2P_GO:
+ case WPAS_MODE_P2P_GROUP_FORMATION:
+ return IEEE80211_MODE_AP;
+ case WPAS_MODE_MESH:
+ return IEEE80211_MODE_MESH;
+ }
+}
+
+
+int wpas_network_disabled(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid);
+int wpas_get_ssid_pmf(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid);
+int pmf_in_use(struct wpa_supplicant *wpa_s, const u8 *addr);
+
+int wpas_init_ext_pw(struct wpa_supplicant *wpa_s);
+
+void dump_freq_data(struct wpa_supplicant *wpa_s, const char *title,
+ struct wpa_used_freq_data *freqs_data,
+ unsigned int len);
+
+int get_shared_radio_freqs_data(struct wpa_supplicant *wpa_s,
+ struct wpa_used_freq_data *freqs_data,
+ unsigned int len);
+int get_shared_radio_freqs(struct wpa_supplicant *wpa_s,
+ int *freq_array, unsigned int len);
+
+void wpas_network_reenabled(void *eloop_ctx, void *timeout_ctx);
+
+void wpas_vendor_elem_update(struct wpa_supplicant *wpa_s);
+struct wpa_supplicant * wpas_vendor_elem(struct wpa_supplicant *wpa_s,
+ enum wpa_vendor_elem_frame frame);
+int wpas_vendor_elem_remove(struct wpa_supplicant *wpa_s, int frame,
+ const u8 *elem, size_t len);
+
+#ifdef CONFIG_FST
+
+struct fst_wpa_obj;
+
+void fst_wpa_supplicant_fill_iface_obj(struct wpa_supplicant *wpa_s,
+ struct fst_wpa_obj *iface_obj);
+
+#endif /* CONFIG_FST */
+
+int wpas_sched_scan_plans_set(struct wpa_supplicant *wpa_s, const char *cmd);
+
+struct hostapd_hw_modes * get_mode(struct hostapd_hw_modes *modes,
+ u16 num_modes, enum hostapd_hw_mode mode,
+ bool is_6ghz);
+struct hostapd_hw_modes * get_mode_with_freq(struct hostapd_hw_modes *modes,
+ u16 num_modes, int freq);
+
+void wpa_bss_tmp_disallow(struct wpa_supplicant *wpa_s, const u8 *bssid,
+ unsigned int sec, int rssi_threshold);
+int wpa_is_bss_tmp_disallowed(struct wpa_supplicant *wpa_s,
+ struct wpa_bss *bss);
+void free_bss_tmp_disallowed(struct wpa_supplicant *wpa_s);
+
+struct wpa_ssid * wpa_scan_res_match(struct wpa_supplicant *wpa_s,
+ int i, struct wpa_bss *bss,
+ struct wpa_ssid *group,
+ int only_first_ssid, int debug_print);
+
+int wpas_ctrl_iface_get_pref_freq_list_override(struct wpa_supplicant *wpa_s,
+ enum wpa_driver_if_type if_type,
+ unsigned int *num,
+ unsigned int *freq_list);
+
+int wpa_is_fils_supported(struct wpa_supplicant *wpa_s);
+int wpa_is_fils_sk_pfs_supported(struct wpa_supplicant *wpa_s);
+
+void wpas_clear_driver_signal_override(struct wpa_supplicant *wpa_s);
+
+int wpas_send_mscs_req(struct wpa_supplicant *wpa_s);
+void wpas_populate_mscs_descriptor_ie(struct robust_av_data *robust_av,
+ struct wpabuf *buf);
+void wpas_handle_robust_av_recv_action(struct wpa_supplicant *wpa_s,
+ const u8 *src, const u8 *buf,
+ size_t len);
+void wpas_handle_assoc_resp_mscs(struct wpa_supplicant *wpa_s, const u8 *bssid,
+ const u8 *ies, size_t ies_len);
+int wpas_send_scs_req(struct wpa_supplicant *wpa_s);
+void free_up_tclas_elem(struct scs_desc_elem *elem);
+void free_up_scs_desc(struct scs_robust_av_data *data);
+void wpas_handle_robust_av_scs_recv_action(struct wpa_supplicant *wpa_s,
+ const u8 *src, const u8 *buf,
+ size_t len);
+void wpas_scs_deinit(struct wpa_supplicant *wpa_s);
+void wpas_handle_qos_mgmt_recv_action(struct wpa_supplicant *wpa_s,
+ const u8 *src,
+ const u8 *buf, size_t len);
+void wpas_dscp_deinit(struct wpa_supplicant *wpa_s);
+int wpas_send_dscp_response(struct wpa_supplicant *wpa_s,
+ struct dscp_resp_data *resp_data);
+void wpas_handle_assoc_resp_qos_mgmt(struct wpa_supplicant *wpa_s,
+ const u8 *ies, size_t ies_len);
+int wpas_send_dscp_query(struct wpa_supplicant *wpa_s, const char *domain_name,
+ size_t domain_name_length);
+
+int wpas_pasn_auth_start(struct wpa_supplicant *wpa_s,
+ const u8 *bssid, int akmp, int cipher,
+ u16 group, int network_id,
+ const u8 *comeback, size_t comeback_len);
+void wpas_pasn_auth_stop(struct wpa_supplicant *wpa_s);
+int wpas_pasn_auth_tx_status(struct wpa_supplicant *wpa_s,
+ const u8 *data, size_t data_len, u8 acked);
+int wpas_pasn_auth_rx(struct wpa_supplicant *wpa_s,
+ const struct ieee80211_mgmt *mgmt, size_t len);
+
+int wpas_pasn_deauthenticate(struct wpa_supplicant *wpa_s, const u8 *bssid);
+
+#endif /* WPA_SUPPLICANT_I_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_supplicant_template.conf b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_supplicant_template.conf
new file mode 100755
index 0000000..f55227f
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpa_supplicant_template.conf
@@ -0,0 +1,7 @@
+##### wpa_supplicant configuration file template #####
+update_config=1
+eapol_version=1
+ap_scan=1
+fast_reauth=1
+pmf=1
+p2p_add_cli_chan=1
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpas_glue.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpas_glue.h
new file mode 100755
index 0000000..338af4e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpas_glue.h
@@ -0,0 +1,30 @@
+/*
+ * WPA Supplicant - Glue code to setup EAPOL and RSN modules
+ * Copyright (c) 2003-2008, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPAS_GLUE_H
+#define WPAS_GLUE_H
+
+enum wpa_ctrl_req_type;
+
+int wpa_supplicant_init_eapol(struct wpa_supplicant *wpa_s);
+int wpa_supplicant_init_wpa(struct wpa_supplicant *wpa_s);
+void wpa_supplicant_rsn_supp_set_config(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+int wpa_ether_send(struct wpa_supplicant *wpa_s, const u8 *dest,
+ u16 proto, const u8 *buf, size_t len);
+
+const char * wpa_supplicant_ctrl_req_to_string(enum wpa_ctrl_req_type field,
+ const char *default_txt,
+ const char **txt);
+
+enum wpa_ctrl_req_type wpa_supplicant_ctrl_req_from_string(const char *field);
+
+void wpas_send_ctrl_req(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid,
+ const char *field_name, const char *txt);
+
+#endif /* WPAS_GLUE_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpas_kay.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpas_kay.h
new file mode 100755
index 0000000..81f8e0c
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wpas_kay.h
@@ -0,0 +1,51 @@
+/*
+ * IEEE 802.1X-2010 KaY Interface
+ * Copyright (c) 2013-2014, Qualcomm Atheros, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPAS_KAY_H
+#define WPAS_KAY_H
+
+#ifdef CONFIG_MACSEC
+
+int ieee802_1x_alloc_kay_sm(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+void * ieee802_1x_notify_create_actor(struct wpa_supplicant *wpa_s,
+ const u8 *peer_addr);
+void ieee802_1x_dealloc_kay_sm(struct wpa_supplicant *wpa_s);
+
+void * ieee802_1x_create_preshared_mka(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid);
+
+#else /* CONFIG_MACSEC */
+
+static inline int ieee802_1x_alloc_kay_sm(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid)
+{
+ return 0;
+}
+
+static inline void *
+ieee802_1x_notify_create_actor(struct wpa_supplicant *wpa_s,
+ const u8 *peer_addr)
+{
+ return NULL;
+}
+
+static inline void ieee802_1x_dealloc_kay_sm(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline void *
+ieee802_1x_create_preshared_mka(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid)
+{
+ return 0;
+}
+
+#endif /* CONFIG_MACSEC */
+
+#endif /* WPAS_KAY_H */
diff --git a/ap/app/wpa_supplicant-2.10/wpa_supplicant/wps_supplicant.h b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wps_supplicant.h
new file mode 100755
index 0000000..c55936c
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.10/wpa_supplicant/wps_supplicant.h
@@ -0,0 +1,164 @@
+/*
+ * wpa_supplicant / WPS integration
+ * Copyright (c) 2008-2012, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPS_SUPPLICANT_H
+#define WPS_SUPPLICANT_H
+
+struct wpa_scan_results;
+
+#ifdef CONFIG_WPS
+
+#include "wps/wps.h"
+#include "wps/wps_defs.h"
+
+struct wpa_bss;
+
+struct wps_new_ap_settings {
+ const char *ssid_hex;
+ const char *auth;
+ const char *encr;
+ const char *key_hex;
+};
+
+int wpas_wps_init(struct wpa_supplicant *wpa_s);
+void wpas_wps_deinit(struct wpa_supplicant *wpa_s);
+int wpas_wps_eapol_cb(struct wpa_supplicant *wpa_s);
+enum wps_request_type wpas_wps_get_req_type(struct wpa_ssid *ssid);
+int wpas_wps_start_pbc(struct wpa_supplicant *wpa_s, const u8 *bssid,
+ int p2p_group, int multi_ap_backhaul_sta);
+int wpas_wps_start_pin(struct wpa_supplicant *wpa_s, const u8 *bssid,
+ const char *pin, int p2p_group, u16 dev_pw_id);
+void wpas_wps_pbc_overlap(struct wpa_supplicant *wpa_s);
+int wpas_wps_cancel(struct wpa_supplicant *wpa_s);
+int wpas_wps_start_reg(struct wpa_supplicant *wpa_s, const u8 *bssid,
+ const char *pin, struct wps_new_ap_settings *settings);
+int wpas_wps_ssid_bss_match(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid, struct wpa_bss *bss);
+int wpas_wps_ssid_wildcard_ok(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid, struct wpa_bss *bss);
+int wpas_wps_scan_pbc_overlap(struct wpa_supplicant *wpa_s,
+ struct wpa_bss *selected, struct wpa_ssid *ssid);
+void wpas_wps_notify_scan_results(struct wpa_supplicant *wpa_s);
+int wpas_wps_searching(struct wpa_supplicant *wpa_s);
+int wpas_wps_scan_result_text(const u8 *ies, size_t ies_len, char *pos,
+ char *end);
+int wpas_wps_er_start(struct wpa_supplicant *wpa_s, const char *filter);
+void wpas_wps_er_stop(struct wpa_supplicant *wpa_s);
+int wpas_wps_er_add_pin(struct wpa_supplicant *wpa_s, const u8 *addr,
+ const char *uuid, const char *pin);
+int wpas_wps_er_pbc(struct wpa_supplicant *wpa_s, const char *uuid);
+int wpas_wps_er_learn(struct wpa_supplicant *wpa_s, const char *uuid,
+ const char *pin);
+int wpas_wps_er_set_config(struct wpa_supplicant *wpa_s, const char *uuid,
+ int id);
+int wpas_wps_er_config(struct wpa_supplicant *wpa_s, const char *uuid,
+ const char *pin, struct wps_new_ap_settings *settings);
+struct wpabuf * wpas_wps_er_nfc_config_token(struct wpa_supplicant *wpa_s,
+ int ndef, const char *uuid);
+int wpas_wps_terminate_pending(struct wpa_supplicant *wpa_s);
+void wpas_wps_update_config(struct wpa_supplicant *wpa_s);
+void wpas_wps_update_mac_addr(struct wpa_supplicant *wpa_s);
+struct wpabuf * wpas_wps_nfc_config_token(struct wpa_supplicant *wpa_s,
+ int ndef, const char *id_str);
+struct wpabuf * wpas_wps_nfc_token(struct wpa_supplicant *wpa_s, int ndef);
+int wpas_wps_start_nfc(struct wpa_supplicant *wpa_s, const u8 *dev_addr,
+ const u8 *bssid,
+ const struct wpabuf *dev_pw, u16 dev_pw_id,
+ int p2p_group, const u8 *peer_pubkey_hash,
+ const u8 *ssid, size_t ssid_len, int freq);
+int wpas_wps_nfc_tag_read(struct wpa_supplicant *wpa_s,
+ const struct wpabuf *data, int forced_freq);
+struct wpabuf * wpas_wps_nfc_handover_req(struct wpa_supplicant *wpa_s,
+ int ndef);
+struct wpabuf * wpas_wps_nfc_handover_sel(struct wpa_supplicant *wpa_s,
+ int ndef, int cr, const char *uuid);
+int wpas_wps_nfc_report_handover(struct wpa_supplicant *wpa_s,
+ const struct wpabuf *req,
+ const struct wpabuf *sel);
+int wpas_er_wps_nfc_report_handover(struct wpa_supplicant *wpa_s,
+ const struct wpabuf *req,
+ const struct wpabuf *sel);
+void wpas_wps_update_ap_info(struct wpa_supplicant *wpa_s,
+ struct wpa_scan_results *scan_res);
+void wpas_wps_notify_assoc(struct wpa_supplicant *wpa_s, const u8 *bssid);
+int wpas_wps_reenable_networks_pending(struct wpa_supplicant *wpa_s);
+
+#else /* CONFIG_WPS */
+
+static inline int wpas_wps_init(struct wpa_supplicant *wpa_s)
+{
+ return 0;
+}
+
+static inline void wpas_wps_deinit(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline int wpas_wps_eapol_cb(struct wpa_supplicant *wpa_s)
+{
+ return 0;
+}
+
+static inline u8 wpas_wps_get_req_type(struct wpa_ssid *ssid)
+{
+ return 0;
+}
+
+static inline int wpas_wps_ssid_bss_match(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid,
+ struct wpa_bss *bss)
+{
+ return -1;
+}
+
+static inline int wpas_wps_ssid_wildcard_ok(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid,
+ struct wpa_bss *bss)
+{
+ return 0;
+}
+
+static inline int wpas_wps_scan_pbc_overlap(struct wpa_supplicant *wpa_s,
+ struct wpa_bss *selected,
+ struct wpa_ssid *ssid)
+{
+ return 0;
+}
+
+static inline void wpas_wps_notify_scan_results(struct wpa_supplicant *wpa_s)
+{
+}
+
+static inline int wpas_wps_searching(struct wpa_supplicant *wpa_s)
+{
+ return 0;
+}
+
+static inline void wpas_wps_update_ap_info(struct wpa_supplicant *wpa_s,
+ struct wpa_scan_results *scan_res)
+{
+}
+
+static inline void wpas_wps_notify_assoc(struct wpa_supplicant *wpa_s,
+ const u8 *bssid)
+{
+}
+
+static inline int
+wpas_wps_reenable_networks_pending(struct wpa_supplicant *wpa_s)
+{
+ return 0;
+}
+
+static inline void wpas_wps_update_mac_addr(struct wpa_supplicant *wpa_s)
+{
+}
+
+#endif /* CONFIG_WPS */
+
+#endif /* WPS_SUPPLICANT_H */
