[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/build/uClibc/Makefile.in b/ap/build/uClibc/Makefile.in
new file mode 100755
index 0000000..48e5e8b
--- /dev/null
+++ b/ap/build/uClibc/Makefile.in
@@ -0,0 +1,531 @@
+# Makefile for uClibc
+#
+# Copyright (C) 2000-2008 Erik Andersen <andersen@uclibc.org>
+#
+# Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball.
+#
+
+#--------------------------------------------------------------
+# You shouldn't need to mess with anything beyond this point...
+#--------------------------------------------------------------
+clean_targets := clean realclean distclean \
+ objclean-y headers_clean-y CLEAN_utils
+noconfig_targets := menuconfig config oldconfig silentoldconfig randconfig \
+ defconfig allyesconfig allnoconfig \
+ release dist tags help
+
+include $(top_srcdir)Rules.mak
+sub_headers := headers
+ifndef KCONFIG_CONFIG
+KCONFIG_CONFIG := $(top_builddir).config
+endif
+export KCONFIG_CONFIG
+
+ifeq ($(HAVE_DOT_CONFIG),y)
+
+all: pregen libs
+libs: pregen
+
+# In this section, we need .config
+-include $(top_builddir).config.cmd
+
+else # ifeq ($(HAVE_DOT_CONFIG),y)
+
+all: menuconfig
+
+headers:
+ @echo "Need to make a config file first, run: make menuconfig"
+ @false
+
+endif # ifeq ($(HAVE_DOT_CONFIG),y)
+
+include $(top_srcdir)ldso/Makefile.in
+include $(top_srcdir)libcrypt/Makefile.in
+include $(top_srcdir)libintl/Makefile.in
+include $(top_srcdir)libm/Makefile.in
+include $(top_srcdir)libnsl/Makefile.in
+include $(top_srcdir)libresolv/Makefile.in
+include $(top_srcdir)libutil/Makefile.in
+include $(top_srcdir)libpthread/Makefile.in
+include $(top_srcdir)librt/Makefile.in
+include $(top_srcdir)libubacktrace/Makefile.in
+include $(top_srcdir)extra/locale/Makefile.in
+
+# last included to catch all the objects added by others (locales/threads)
+include $(top_srcdir)libc/Makefile.in
+
+conf := $(top_builddir)extra/config/conf
+mconf := $(top_builddir)extra/config/mconf
+
+ifeq ($(HAVE_DOT_CONFIG),y)
+# If the .config changes then we have to make sure that our includes are
+# updated properly. This would normally work by saying that the headers
+# have uClibc_config.h as prerequisite but since we _symlink_ the headers
+# and do not (?) want to rely on 'make -L' we better update them right here,
+# on spot to save us from alot of hazzle.
+$(top_builddir)include/bits/uClibc_config.h: $(conf) $(KCONFIG_CONFIG) $(top_srcdir)extra/scripts/conf-header.sh | $(top_builddir)include/bits $(top_builddir)include/config
+ @$(disp_gen)
+ $(Q)@$< -s $(top_srcdir)extra/Configs/Config.in
+ $(Q)$(top_srcdir)extra/scripts/conf-header.sh $(KCONFIG_CONFIG) > $@
+ $(Q)$(MAKE) headers-y
+
+# The above doesn't work for threads, though. Just using check-symlinks for now.
+# XXX: FIXME: this is ugly
+MAKEFLAGS += -L
+
+$(top_builddir)include/config/linuxthreads/old.h $(top_builddir)include/config/linuxthreads/new.h:
+ @true
+
+# For the moment, we have to keep re-running this target
+# because the fix includes scripts rely on pre-processers
+# in order to generate the headers correctly :(. That
+# means we can't use the $(HOSTCC) in order to get the
+# correct output.
+ifeq ($(ARCH_USE_MMU),y)
+export header_extra_args =
+else
+export header_extra_args = -n
+endif
+HEADERS_BITS_COMMON := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/common/bits/*.h))
+HEADERS_BITS_ARCH := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/*.h))
+HEADERS_BITS_SUBARCH :=
+ifneq ($(TARGET_SUBARCH),)
+HEADERS_BITS_SUBARCH := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/$(TARGET_SUBARCH)/*.h))
+endif
+HEADERS_BITS_COMMON := $(filter-out $(HEADERS_BITS_ARCH) $(HEADERS_BITS_SUBARCH) $(HEADERS_BITS_PTHREAD),$(HEADERS_BITS_COMMON))
+
+HEADERS_SYS_COMMON := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/common/sys/*.h))
+HEADERS_SYS_ARCH := $(notdir $(wildcard $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/sys/*.h))
+HEADERS_SYS_COMMON := $(filter-out $(HEADERS_SYS_ARCH),$(HEADERS_SYS_COMMON))
+
+ALL_HEADERS_COMMON := $(top_builddir)include/fpu_control.h \
+ $(top_builddir)include/dl-osinfo.h \
+ $(top_builddir)include/hp-timing.h
+ALL_HEADERS_BITS_COMMON := $(addprefix $(top_builddir)include/bits/,$(HEADERS_BITS_COMMON))
+ALL_HEADERS_BITS_ARCH := $(addprefix $(top_builddir)include/bits/,$(HEADERS_BITS_ARCH))
+ifneq ($(TARGET_SUBARCH),)
+ALL_HEADERS_BITS_SUBARCH := $(addprefix $(top_builddir)include/bits/,$(HEADERS_BITS_SUBARCH))
+else
+ALL_HEADERS_BITS_SUBARCH :=
+endif
+ALL_HEADERS_SYS_COMMON := $(addprefix $(top_builddir)include/sys/,$(HEADERS_SYS_COMMON))
+ALL_HEADERS_SYS_ARCH := $(addprefix $(top_builddir)include/sys/,$(HEADERS_SYS_ARCH))
+
+target-headers-sysdep := \
+ $(ALL_HEADERS_COMMON) \
+ $(ALL_HEADERS_BITS_COMMON) \
+ $(ALL_HEADERS_BITS_ARCH) \
+ $(ALL_HEADERS_BITS_SUBARCH) \
+ $(ALL_HEADERS_SYS_COMMON) \
+ $(ALL_HEADERS_SYS_ARCH) \
+ $(ALL_HEADERS_BITS_PTHREAD)
+
+$(top_builddir)include/fpu_control.h:
+ @$(disp_ln)
+ $(Q)[ -r $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/$(@F) ] && \
+ $(LN) -fs $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/$(@F) $@ || \
+ $(LN) -fs $(call rel_srcdir)libc/sysdeps/linux/common/$(@F) $@
+
+$(top_builddir)include/dl-osinfo.h $(top_builddir)include/hp-timing.h:
+ $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/common/$(@F) $@
+
+$(ALL_HEADERS_BITS_COMMON):
+ $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/common/bits/$(@F) $@
+
+$(ALL_HEADERS_BITS_ARCH):
+ $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/$(@F) $@
+
+ifneq ($(TARGET_SUBARCH),)
+$(ALL_HEADERS_BITS_SUBARCH):
+ $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/bits/$(TARGET_SUBARCH)/$(@F) $@
+endif
+
+ifneq ($(strip $(ALL_HEADERS_SYS_COMMON)),)
+$(ALL_HEADERS_SYS_COMMON):
+ $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/common/sys/$(@F) $@
+endif
+
+ifneq ($(strip $(ALL_HEADERS_SYS_ARCH)),)
+$(ALL_HEADERS_SYS_ARCH):
+ $(do_ln) $(call rel_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/sys/$(@F) $@
+endif
+
+$(target-headers-sysdep) $(pregen-headers-y): | $(top_builddir)include/bits $(top_builddir)include/sys
+
+HEADERCLEAN_common:
+ $(do_rm) $(ALL_HEADERS_COMMON)
+headers_clean-y += HEADERCLEAN_common
+
+# The headers. Arch specific headers are specified via ARCH_HEADERS in
+# libc/sysdeps/linux/$(TARGET_ARCH)/Makefile.arch which appends those via
+# libc/sysdeps/linux/Makefile.commonarch to headers-y
+headers-y += $(target-headers-sysdep)
+
+headers: $(top_builddir)include/bits/uClibc_config.h | subdirs
+subdirs: $(addprefix $(top_builddir),$(subdirs))
+pregen-headers: $(top_builddir)include/bits/sysnum.h $(pregen-headers-y)
+pregen: headers pregen-headers
+ $(Q)$(if $(UCLIBC_HAS_LOCALE),$(MAKE) -C extra/locale locale_headers)
+
+$(top_builddir)include/bits/sysnum.h: $(top_srcdir)extra/scripts/gen_bits_syscall_h.sh | $(top_builddir)include/bits
+ @$(disp_gen)
+ $(Q)set -e; \
+ tmp=`mktemp $(top_builddir)include/bits/sysnum.h.XXXXXX 2>/dev/null || true`; \
+ [ -z "$$tmp" ] && tmp='$(top_builddir)include/bits/sysnum.h.new'; \
+ KERNEL_HEADERS="${KERNEL_HEADERS}" top_builddir="$(top_builddir)" CC="$(CC) $(CPU_CFLAGS)" $(SHELL) $< > $$tmp; \
+ if cmp $(top_builddir)include/bits/sysnum.h $$tmp >/dev/null 2>&1; then \
+ $(RM) $$tmp; \
+ else \
+ mv -f $$tmp $(top_builddir)include/bits/sysnum.h; \
+ fi
+ @# Ugly linux specific hack..
+ $(Q)if grep -q __NR_ $@; then true; else \
+ rm -f $@; \
+ echo "ERROR: Could not generate syscalls."; \
+ echo "Make sure that you have proper kernel headers."; \
+ echo "Your .config in KERNEL_HEADERS=\"\" was set to:"; \
+ echo "${KERNEL_HEADERS}"; \
+ exit 1; \
+ fi
+
+.PHONY: $(LOCAL_INSTALL_PATH)
+$(LOCAL_INSTALL_PATH):
+ $(Q)$(MAKE) PREFIX=$(shell pwd)/$(LOCAL_INSTALL_PATH) RUNTIME_PREFIX=/ \
+ DEVEL_PREFIX=/usr/ \
+ HOSTCC="$(HOSTCC)" \
+ install
+
+install: install_runtime install_dev
+
+
+RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB=$(shell $(top_srcdir)extra/scripts/relative_path.sh $(DEVEL_PREFIX)$(MULTILIB_DIR) $(RUNTIME_PREFIX)$(MULTILIB_DIR))
+
+startfiles: $(crt-y)
+
+$(top_builddir)extra/scripts/unifdef: |$(top_builddir)extra/scripts
+$(top_builddir)extra/scripts/unifdef: $(top_srcdir)extra/scripts/unifdef.c
+ $(hcompile.u)
+
+# Installs header files.
+# a "y" here means the feature is enabled and so we should *not* rm it.
+# if the option expands to nothing though, we can punt the headers.
+HEADERS_RM- := \
+ dl-osinfo.h \
+ hp-timing.h \
+ _lfs_64.h \
+ bits/uClibc_arch_features.h \
+ bits/kernel_sigaction.h \
+ bits/kernel_stat.h \
+ bits/kernel_types.h \
+ bits/syscalls.h \
+ bits/syscalls-common.h \
+ bits/uClibc_fpmax.h \
+ bits/uClibc_uintmaxtostr.h \
+ bits/uClibc_uwchar.h \
+ bits/uClibc_va_copy.h \
+ bits/sigcontextinfo.h \
+ bits/stackinfo.h \
+ tls.h \
+ rpc/des_crypt.h \
+ rpc/key_prot.h \
+ rpc/rpc_des.h
+ifeq ($(UCLIBC_STRICT_HEADERS),y)
+HEADERS_RM- += sgtty.h
+endif
+HEADERS_RM-$(HAVE_SHARED) += dlfcn.h bits/dlfcn.h
+HEADERS_RM-$(PTHREADS_DEBUG_SUPPORT) += thread_db.h
+HEADERS_RM-$(UCLIBC_HAS_BSD_ERR) += err.h
+HEADERS_RM-$(UCLIBC_HAS_CRYPT) += crypt.h
+HEADERS_RM-$(UCLIBC_HAS_EPOLL) += sys/epoll.h
+HEADERS_RM-$(UCLIBC_HAS_FENV) += fenv.h bits/fenv.h bits/fenvinline.h
+HEADERS_RM-$(UCLIBC_HAS_FLOATS) += complex.h fpu_control.h ieee754.h \
+ math.h \
+ tgmath.h \
+ bits/math*.h
+HEADERS_RM-$(findstring y,$(UCLIBC_HAS_FTW)$(UCLIBC_HAS_NFTW)) += ftw.h
+HEADERS_RM-$(UCLIBC_HAS_FTS) += fts.h
+HEADERS_RM-$(UCLIBC_HAS_GETTEXT_AWARENESS) += libintl.h
+HEADERS_RM-$(UCLIBC_HAS_GLIBC_CUSTOM_PRINTF) += printf.h
+HEADERS_RM-$(UCLIBC_HAS_GLOB) += glob.h
+HEADERS_RM-$(UCLIBC_HAS_GNU_ERROR) += error.h
+HEADERS_RM-$(UCLIBC_HAS_GNU_GETOPT)$(UCLIBC_HAS_GETOPT_LONG) += getopt.h
+HEADERS_RM-$(UCLIBC_HAS_IPV6) += netinet/ip6.h netinet/icmp6.h
+HEADERS_RM-$(UCLIBC_HAS_BACKTRACE) += execinfo.h
+HEADERS_RM-$(UCLIBC_HAS_LOCALE) += iconv.h bits/uClibc_ctype.h
+HEADERS_RM-$(UCLIBC_HAS_PTY) += pty.h
+HEADERS_RM-$(UCLIBC_HAS_REALTIME) += mqueue.h bits/mqueue.h sched.h \
+ bits/sched.h \
+ semaphore.h
+HEADERS_RM-$(UCLIBC_HAS_REGEX) += regex.h regexp.h
+HEADERS_RM-$(UCLIBC_HAS_RPC) += rpc
+HEADERS_RM-$(UCLIBC_HAS_SHADOW) += shadow.h
+HEADERS_RM-$(UCLIBC_HAS_SOCKET) += sys/socket.h bits/socket.h sys/socketvar.h
+HEADERS_RM-$(UCLIBC_HAS_SYSLOG) += syslog.h sys/syslog.h bits/syslog*.h
+HEADERS_RM-$(UCLIBC_HAS_THREADS) += *thread*.h semaphore.h \
+ bits/*thread*.h \
+ bits/initspin.h
+HEADERS_RM-$(UCLIBC_HAS_THREADS_NATIVE) += atomic.h bits/atomic.h
+HEADERS_RM-$(UCLIBC_HAS_UTMPX) += bits/utmpx.h utmpx.h
+HEADERS_RM-$(UCLIBC_HAS_WCHAR) += wchar.h wctype.h
+HEADERS_RM-$(UCLIBC_HAS_WORDEXP) += wordexp.h
+HEADERS_RM-$(UCLIBC_HAS_XATTR) += sys/xattr.h
+HEADERS_RM-$(UCLIBC_HAS_XLOCALE) += xlocale.h
+HEADERS_RM-$(UCLIBC_LINUX_SPECIFIC) += sys/eventfd.h sys/fsuid.h \
+ bits/inotify.h \
+ sys/inotify.h \
+ sys/kdaemon.h \
+ sys/perm.h \
+ sys/personality.h \
+ sys/prctl.h \
+ sys/reboot.h \
+ sys/sendfile.h \
+ bits/signalfd.h \
+ sys/signalfd.h \
+ bits/statfs.h \
+ sys/statfs.h \
+ sys/swap.h \
+ sys/sysctl.h \
+ sys/sysinfo.h \
+ bits/timerfd.h \
+ sys/timerfd.h \
+ sys/vfs.h
+HEADERS_RM-$(UCLIBC_SUPPORT_AI_ADDRCONFIG) += ifaddrs.h
+HEADERS_RM-$(UCLIBC_SV4_DEPRECATED) += ustat.h sys/ustat.h bits/ustat.h
+HEADERS_RM-$(UCLIBC_SUSV3_LEGACY) += sys/timeb.h regexp.h
+HEADERS_RM-$(UCLIBC_SUSV4_LEGACY) += utime.h ucontext.h
+
+ifneq ($(findstring install,$(MAKECMDGOALS)),)
+$(addprefix $(PREFIX)$(DEVEL_PREFIX),include $(MULTILIB_DIR)):
+ $(do_mkdir)
+# avoid warning about duplicate targets in rule or overrides
+ifneq ($(abspath $(RUNTIME_PREFIX)$(MULTILIB_DIR)),$(abspath $(DEVEL_PREFIX)$(MULTILIB_DIR)))
+$(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR):
+ $(do_mkdir)
+endif
+endif
+install_headers: headers $(top_builddir)extra/scripts/unifdef | $(PREFIX)$(DEVEL_PREFIX)include
+ @$(call disp_install,"include -> $(PREFIX)$(DEVEL_PREFIX)include")
+ $(Q)top_builddir=$(top_builddir) \
+ $(top_srcdir)extra/scripts/install_headers.sh \
+ include $(PREFIX)$(DEVEL_PREFIX)include
+ifneq ($(O),) # only run this step in O is set i.e. make O=/my/builddir/ ..
+ @$(call disp_install,"$(top_builddir)/include -> $(PREFIX)$(DEVEL_PREFIX)include")
+ $(Q)top_builddir=$(top_builddir) \
+ $(top_srcdir)extra/scripts/install_headers.sh \
+ $(top_builddir)/include $(PREFIX)$(DEVEL_PREFIX)include
+endif
+ $(Q)cd $(PREFIX)$(DEVEL_PREFIX)include && $(RM) -r $(HEADERS_RM-)
+ifeq ($(UCLIBC_HAS_WCHAR),)
+ $(Q)cd $(PREFIX)$(DEVEL_PREFIX)include && mv -f wchar-stub.h wchar.h
+else
+ $(Q)cd $(PREFIX)$(DEVEL_PREFIX)include && $(RM) -f wchar-stub.h
+endif
+
+# Installs startfiles
+install_startfiles: startfiles | $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)
+ -$(INSTALL) -m 644 $(startfiles) $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/
+
+# Installs development library links.
+install_dev: install_headers install_runtime install_startfiles | $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)
+ -$(INSTALL) -m 644 $(top_builddir)lib/*.a $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/
+ifeq ($(HAVE_SHARED),y)
+ for i in `cd $(top_builddir) && find lib/ -type l -name 'lib[a-zA-Z]*.so' | \
+ $(SED) -e 's/lib\///'` ; do \
+ $(LN) -sf $(RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB)$$i.$(ABI_VERSION) \
+ $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/$$i; \
+ done
+ifeq ($(HARDWIRED_ABSPATH),y)
+ if [ -f $(top_builddir)lib/libc.so -a -f $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(SHARED_LIBNAME) ] ; then \
+ $(RM) $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \
+ $(SED) -e 's:$(NONSHARED_LIBNAME):$(DEVEL_PREFIX)$(MULTILIB_DIR)/$(NONSHARED_LIBNAME):' \
+ -e 's:$(SHARED_LIBNAME):$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(SHARED_LIBNAME):' \
+ -e 's:$(UCLIBC_LDSO):$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(UCLIBC_LDSO):' \
+ $(top_builddir)lib/libc.so > $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \
+ $(SED) -i -e 's://:/:g' $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \
+ fi
+else
+ -$(INSTALL) -m 755 $(top_builddir)lib/libc.so $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/
+endif
+ifeq ($(UCLIBC_HAS_BACKTRACE),y)
+# Add the AS_NEEDED entry for libubacktrace.so
+ if [ -f $(top_builddir)lib/libc.so -a -f $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)/$(SHARED_LIBNAME) ] ; then \
+ echo "GROUP ( $(UBACKTRACE_ASNEEDED) )" >> $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libc.so; \
+ fi
+endif
+ifeq ($(UCLIBC_HAS_THREADS),y)
+ifneq ($(LINUXTHREADS_OLD),y)
+ifeq ($(HARDWIRED_ABSPATH),y)
+ if [ -f $(top_builddir)lib/libpthread.so -a -f $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)/libpthread.so.$(ABI_VERSION) ] ; then \
+ $(RM) $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread.so; \
+ cp $(top_srcdir)extra/scripts/format.lds $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread.so; \
+ echo "GROUP ( $(RUNTIME_PREFIX)$(MULTILIB_DIR)/libpthread.so.$(ABI_VERSION) $(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread_nonshared.a )" \
+ >> $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread.so; \
+ $(SED) -i -e 's://:/:g' $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libpthread.so; \
+ fi
+else
+ -$(INSTALL) -m 755 $(top_builddir)lib/libpthread.so $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/
+endif
+endif
+endif
+ifeq ($(PTHREADS_DEBUG_SUPPORT),y)
+ $(LN) -sf $(RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB)libthread_db.so.1 \
+ $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/libthread_db.so
+endif
+ifeq ($(DOPIC),y)
+# # If we build shared libraries then the static libs are PIC...
+# # Make _pic.a symlinks to make mklibs.py and similar tools happy.
+ if [ -d $(top_builddir)lib ] ; then \
+ for i in `cd $(top_builddir) && find lib/ -type f -name 'lib*.a' | $(SED) -e 's/lib\///'` ; do \
+ $(LN) -sf $$i $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR)/`echo $$i \
+ | $(SED) -e 's/\.a$$/_pic.a/'`; \
+ done ; \
+ fi
+endif
+endif
+ifeq ($(UCLIBC_FORMAT_SHARED_FLAT),y)
+ for file in $(top_builddir)lib/lib*.gdb; do \
+ if test -f $$file; then \
+ $(INSTALL) -m 755 $$file $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR); \
+ $(INSTALL) -m 755 `echo $$file | $(SED) 's/\.gdb$$//'` \
+ $(PREFIX)$(DEVEL_PREFIX)$(MULTILIB_DIR); \
+ fi; \
+ done
+endif
+
+# Installs run-time libraries
+install_runtime: all | $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)
+ifeq ($(HAVE_SHARED),y)
+ $(INSTALL) -m 755 $(top_builddir)lib/lib*-$(VERSION).so \
+ $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)
+ (cd $(top_builddir)lib && $(TAR) --exclude=$(UCLIBC_LDSO_NAME).so.lds -cf - *.so.*) \
+ | $(TAR) -xf - -C $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR)
+ @if [ -x $(top_builddir)lib/$(UCLIBC_LDSO_NAME)-$(VERSION).so ] ; then \
+ set -e; \
+ $(SHELL_SET_X); \
+ $(INSTALL) -m 755 $(top_builddir)lib/$(UCLIBC_LDSO_NAME)-$(VERSION).so \
+ $(PREFIX)$(RUNTIME_PREFIX)$(MULTILIB_DIR); \
+ fi
+endif
+
+utils: | pregen
+ $(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" -C utils $@
+
+# Installs helper applications, such as 'ldd' and 'ldconfig'
+install_utils: utils
+ $(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" -C utils utils_install
+
+endif # ifeq ($(HAVE_DOT_CONFIG),y)
+
+hostutils: | pregen
+ $(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" HOSTCC="$(HOSTCC)" DOTHOST=.host -C utils $@
+
+install_hostutils: hostutils
+ $(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" HOSTCC="$(HOSTCC)" DOTHOST=.host -C utils utils_install
+
+$(addprefix $(top_builddir),include include/bits include/sys include/config lib extra/config/lxdialog extra/locale extra/scripts $(subdirs)):
+ $(do_mkdir)
+
+# configuration
+# ---------------------------------------------------------------------------
+$(conf) $(mconf): | $(top_builddir)include/config $(top_builddir)extra/config/lxdialog
+ $(Q)$(MAKE) -C extra/config $(@F)
+
+arch-defconfigs := $(notdir $(wildcard $(top_srcdir)extra/Configs/defconfigs/$(ARCH)/*_defconfig))
+
+menuconfig: $(mconf)
+ $(Q)$< extra/Configs/Config.in
+
+config: $(conf)
+ $(Q)$< extra/Configs/Config.in
+
+oldconfig: $(conf)
+ $(Q)$< -o extra/Configs/Config.in
+
+silentoldconfig: $(conf)
+ $(Q)$< -s extra/Configs/Config.in
+
+randconfig: $(conf)
+ $(Q)$< -r extra/Configs/Config.in
+
+allyesconfig: $(conf)
+ $(Q)$< -y extra/Configs/Config.in
+ $(SED) -i -e "s/^DODEBUG=.*/# DODEBUG is not set/" \
+ -e "s/^DOASSERTS=.*/# DOASSERTS is not set/" \
+ -e "s/^SUPPORT_LD_DEBUG_EARLY=.*/# SUPPORT_LD_DEBUG_EARLY is not set/" \
+ -e "s/^SUPPORT_LD_DEBUG=.*/# SUPPORT_LD_DEBUG is not set/" \
+ -e "s/^UCLIBC_MJN3_ONLY=.*/# UCLIBC_MJN3_ONLY is not set/" \
+ $(KCONFIG_CONFIG)
+ $(Q)$< -o extra/Configs/Config.in
+
+allnoconfig: $(conf)
+ $(Q)$< -n extra/Configs/Config.in
+
+defconfig: $(conf)
+ $(Q)$< -D extra/Configs/defconfigs/$(ARCH)/$@ extra/Configs/Config.in
+
+%_defconfig: $(conf)
+ $(Q)$< -D extra/Configs/defconfigs/$(ARCH)/$@ extra/Configs/Config.in
+
+menuconfig-clean-y:
+ $(Q)$(MAKE) -C extra/config CLEAN_extra/config
+
+# The find here should continue to work as long as we are only symlinking
+# headers in to include/. I don't see this changing to anything else, so
+# it should be fine.
+include_clean:
+ $(SECHO) " CLEAN include"
+ $(Q)$(RM) -r $(top_builddir)include/bits
+ $(Q)find $(top_builddir)include/ -type l -exec rm -f {} +
+
+clean: include_clean
+ $(Q)$(RM) -r $(top_builddir)lib
+ @$(MAKE) -C utils CLEAN_utils
+ +$(MAKE) -s -C test clean
+ $(Q)$(RM) $(top_builddir)extra/scripts/unifdef
+ $(Q)$(RM) -r $(LOCAL_INSTALL_PATH)
+
+#
+# Target for uClinux distro
+#
+UCLIBC_VERSION := $(MAJOR_VERSION).$(MINOR_VERSION).$(SUBLEVEL)$(EXTRAVERSION)
+.PHONY: romfs
+romfs:
+ [ -e $(ROMFSDIR)/lib ] || mkdir $(ROMFSDIR)/lib
+ if [ "$(SHARED_TARGET)" ]; then \
+ $(ROMFSINST) $(SHARED_TARGET) /lib/lib$(LIBID).so; \
+ fi
+ifeq ($(strip $(HAVE_SHARED)),y)
+ set -e; for i in lib/lib*-$(UCLIBC_VERSION).so lib/*.so.*; do \
+ if [ -L $$i ]; then \
+ $(ROMFSINST) -s `readlink $$i` /$$i; \
+ else \
+ $(ROMFSINST) -p 755 $$i /lib; \
+ fi; \
+ done
+ set -e; if [ -x lib/ld-uClibc-$(UCLIBC_VERSION).so ] ; then \
+ $(ROMFSINST) -p 755 lib/ld-uClibc-$(UCLIBC_VERSION).so /lib; \
+ #$(ROMFSINST) -s \
+ # /lib/ld-uClibc-$(UCLIBC_VERSION).so \
+ # $(LDSOGCC) ; \
+ fi
+endif
+
+distclean: clean
+ -find . \( -name core -o -name \*.orig -o -name \*~ -o -name .\*.dep \) -exec $(RM) {} \;
+ $(RM) $(top_builddir).config $(top_builddir).config.old $(top_builddir).config.cmd
+ $(RM) $(top_builddir)extra/locale/*.tgz
+ $(MAKE) -C extra/config distclean
+
+dist release:
+ $(RM) ../uClibc-$(VERSION).tar
+ git archive --format=tar --prefix=uClibc-$(VERSION)/ HEAD \
+ > ../uClibc-$(VERSION).tar
+ cat ../uClibc-$(VERSION).tar | bzip2 -c9 > ../uClibc-$(VERSION).tar.bz2
+ cat ../uClibc-$(VERSION).tar | xz -e -c8 > ../uClibc-$(VERSION).tar.xz
+ du -b ../uClibc-$(VERSION).tar.{bz2,xz}
+
+test check: test_compile
+ $(Q)$(MAKE) -C test
+
+test_compile: $(LOCAL_INSTALL_PATH)
+ $(Q)$(MAKE) -C test compile