[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/lib/libnl/libnl-3.2.25/python/doc/Makefile.am b/ap/lib/libnl/libnl-3.2.25/python/doc/Makefile.am
new file mode 100644
index 0000000..a2fe6f2
--- /dev/null
+++ b/ap/lib/libnl/libnl-3.2.25/python/doc/Makefile.am
@@ -0,0 +1,8 @@
+# -*- Makefile -*-
+
+EXTRA_DIST = \
+ conf.py \
+ core.rst \
+ index.rst \
+ route_addr.rst \
+ route.rst
diff --git a/ap/lib/libnl/libnl-3.2.25/python/doc/Makefile.in b/ap/lib/libnl/libnl-3.2.25/python/doc/Makefile.in
new file mode 100644
index 0000000..9835a48
--- /dev/null
+++ b/ap/lib/libnl/libnl-3.2.25/python/doc/Makefile.in
@@ -0,0 +1,446 @@
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# -*- Makefile -*-
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = python/doc
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/lib/defs.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CHECK_CFLAGS = @CHECK_CFLAGS@
+CHECK_LIBS = @CHECK_LIBS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FLEX = @FLEX@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBNL_VERSION = @LIBNL_VERSION@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_AGE = @LT_AGE@
+LT_CURRENT = @LT_CURRENT@
+LT_REVISION = @LT_REVISION@
+MAJ_VERSION = @MAJ_VERSION@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MIC_VERSION = @MIC_VERSION@
+MIN_VERSION = @MIN_VERSION@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+YACC = @YACC@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfigdir = @pkgconfigdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+EXTRA_DIST = \
+ conf.py \
+ core.rst \
+ index.rst \
+ route_addr.rst \
+ route.rst
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign python/doc/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign python/doc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+ cscopelist-am ctags-am distclean distclean-generic \
+ distclean-libtool distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags-am uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/ap/lib/libnl/libnl-3.2.25/python/doc/conf.py b/ap/lib/libnl/libnl-3.2.25/python/doc/conf.py
new file mode 100644
index 0000000..74041f0
--- /dev/null
+++ b/ap/lib/libnl/libnl-3.2.25/python/doc/conf.py
@@ -0,0 +1,216 @@
+# -*- coding: utf-8 -*-
+#
+# libnl-python documentation build configuration file, created by
+# sphinx-quickstart on Mon May 9 10:58:58 2011.
+#
+# This file is execfile()d with the current directory set to its containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+import sys, os
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#sys.path.insert(0, os.path.abspath('.'))
+
+# -- General configuration -----------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+#needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be extensions
+# coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
+extensions = ['sphinx.ext.todo', 'sphinx.ext.ifconfig', 'sphinx.ext.viewcode']
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix of source filenames.
+source_suffix = '.rst'
+
+# The encoding of source files.
+#source_encoding = 'utf-8-sig'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = u'libnl-python'
+copyright = u'2011, Thomas Graf <tgraf@suug.ch>'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+version = '1.0'
+# The full version, including alpha/beta/rc tags.
+release = '1.0'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#language = None
+
+# There are two options for replacing |today|: either, you set today to some
+# non-false value, then it is used:
+#today = ''
+# Else, today_fmt is used as the format for a strftime call.
+#today_fmt = '%B %d, %Y'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+exclude_patterns = ['_build']
+
+# The reST default role (used for this markup: `text`) to use for all documents.
+#default_role = None
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+#add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+#add_module_names = True
+
+# If true, sectionauthor and moduleauthor directives will be shown in the
+# output. They are ignored by default.
+#show_authors = False
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# A list of ignored prefixes for module index sorting.
+#modindex_common_prefix = []
+
+
+# -- Options for HTML output ---------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages. See the documentation for
+# a list of builtin themes.
+html_theme = 'default'
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further. For a list of options available for each theme, see the
+# documentation.
+#html_theme_options = {}
+
+# Add any paths that contain custom themes here, relative to this directory.
+#html_theme_path = []
+
+# The name for this set of Sphinx documents. If None, it defaults to
+# "<project> v<release> documentation".
+#html_title = None
+
+# A shorter title for the navigation bar. Default is the same as html_title.
+#html_short_title = None
+
+# The name of an image file (relative to this directory) to place at the top
+# of the sidebar.
+#html_logo = None
+
+# The name of an image file (within the static path) to use as favicon of the
+# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32
+# pixels large.
+#html_favicon = None
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
+# using the given strftime format.
+#html_last_updated_fmt = '%b %d, %Y'
+
+# If true, SmartyPants will be used to convert quotes and dashes to
+# typographically correct entities.
+#html_use_smartypants = True
+
+# Custom sidebar templates, maps document names to template names.
+#html_sidebars = {}
+
+# Additional templates that should be rendered to pages, maps page names to
+# template names.
+#html_additional_pages = {}
+
+# If false, no module index is generated.
+#html_domain_indices = True
+
+# If false, no index is generated.
+#html_use_index = True
+
+# If true, the index is split into individual pages for each letter.
+#html_split_index = False
+
+# If true, links to the reST sources are added to the pages.
+#html_show_sourcelink = True
+
+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
+#html_show_sphinx = True
+
+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
+#html_show_copyright = True
+
+# If true, an OpenSearch description file will be output, and all pages will
+# contain a <link> tag referring to it. The value of this option must be the
+# base URL from which the finished HTML is served.
+#html_use_opensearch = ''
+
+# This is the file name suffix for HTML files (e.g. ".xhtml").
+#html_file_suffix = None
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'libnl-pythondoc'
+
+
+# -- Options for LaTeX output --------------------------------------------------
+
+# The paper size ('letter' or 'a4').
+#latex_paper_size = 'letter'
+
+# The font size ('10pt', '11pt' or '12pt').
+#latex_font_size = '10pt'
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title, author, documentclass [howto/manual]).
+latex_documents = [
+ ('index', 'libnl-python.tex', u'libnl-python Documentation',
+ u'Thomas Graf \\textless{}tgraf@suug.ch\\textgreater{}', 'manual'),
+]
+
+# The name of an image file (relative to this directory) to place at the top of
+# the title page.
+#latex_logo = None
+
+# For "manual" documents, if this is true, then toplevel headings are parts,
+# not chapters.
+#latex_use_parts = False
+
+# If true, show page references after internal links.
+#latex_show_pagerefs = False
+
+# If true, show URL addresses after external links.
+#latex_show_urls = False
+
+# Additional stuff for the LaTeX preamble.
+#latex_preamble = ''
+
+# Documents to append as an appendix to all manuals.
+#latex_appendices = []
+
+# If false, no module index is generated.
+#latex_domain_indices = True
+
+
+# -- Options for manual page output --------------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+ ('index', 'libnl-python', u'libnl-python Documentation',
+ [u'Thomas Graf <tgraf@suug.ch>'], 1)
+]
diff --git a/ap/lib/libnl/libnl-3.2.25/python/doc/core.rst b/ap/lib/libnl/libnl-3.2.25/python/doc/core.rst
new file mode 100644
index 0000000..012e14c
--- /dev/null
+++ b/ap/lib/libnl/libnl-3.2.25/python/doc/core.rst
@@ -0,0 +1,215 @@
+*******************
+Netlink Core Module
+*******************
+
+.. py:module:: netlink.core
+
+Examples::
+
+ import netlink.core as netlink
+
+===============
+Object
+===============
+
+.. py:class:: Object
+
+ Base class for all classes representing a cacheable object
+
+ Example::
+ obj = netlink.Object("route/link", "link")
+
+ .. py:method:: clone
+
+ Clone the object and return a duplicate (used for COW)
+
+ .. py:method:: dump([params=None])
+
+ Call the libnl internal dump mechanism to dump the object
+ according to the parameters specified.
+
+ .. py:method:: apply(attr, val)
+
+ Applies a attribute=value pair and modifies the object accordingly.
+ Example::
+ obj.apply("mtu", 1200) # Sets attribute mtu to 1200 (link obj)
+
+ :raises: KeyError if attribute is unknown
+ :raises: ImmutableError if attribute is not mutable
+
+ .. py:attribute:: mark
+
+ True if the object is marked, otherwise False.
+
+ .. py:attribute:: shared
+
+ True if the object is used by multiple parties, otherwise False.
+
+ .. py:attribute:: refcnt
+
+ Number of users sharing a reference to the object
+ :rtype: int
+
+ .. py:attribute:: attrs
+
+ List of attributes
+
+ :rtype: list of strings
+
+===============
+Cache
+===============
+
+.. py:class:: Cache
+
+ Base class for all cache implementations.
+
+ A cache is a collection of cacheable objects which is typically used
+ by netlink protocols which handle any kind of object, e.g. network
+ links, network addresses, neighbours, ...
+
+ .. py:method:: subset(filter)
+
+ Returns a new cache containing the subset which matches the
+ provided filter.
+
+ :raises: ValueError if no filter is specified
+ :rtype: :py:class:`Cache`
+
+ .. py:method:: dump([params=None, filter=None])
+
+ Calls the libnl internal dump mechanism to dump the cache according
+ to the parameters and filter specified.
+
+ .. py:method:: clear()
+
+ Remove and possibly destroy all objects in the cache
+
+ .. py:method:: refill([socket=None]) -> :py:class:`Cache`
+
+ Clears and refills the cache with the content which is provided by
+ the kernel, e.g. for a link cache this would mean refilling the
+ cache with all configured network links.
+
+ .. py:method:: provide()
+
+ Caches which have been "provided" are made available to other users
+ (of the same application context) which "require" it. F.e. a link
+ cache is generally provided to allow others to translate interface
+ indexes to link names
+
+
+ .. py:method:: unprovide()
+
+ No longer make the cache available to others. If the cache has been
+ handed out already, that reference will still be valid.
+
+===============
+AbstractAddress
+===============
+
+.. py:class:: AbstractAddress
+
+ Abstract representation of an address. This class is not to be mistaken
+ with :py:class:`route.Address` which represents a configured network
+ address. This class represents the actual address in a family independent
+ way::
+
+ addr = netlink.AbstractAddress('127.0.0.1/8')
+ print addr # => '127.0.0.1/8'
+ print addr.prefixlen # => '8'
+ print addr.family # => 'inet'
+ print len(addr) # => '4' (32bit ipv4 address)
+
+ a = netlink.AbstractAddress('10.0.0.1/24')
+ b = netlink.AbstractAddress('10.0.0.2/24')
+ print a == b # => False
+
+ .. py:attribute:: prefixlen
+
+ Length of prefix in number of bits.
+
+ :rtype: int
+
+ .. py:attribute:: family
+
+ The family type of the address. Setting the address family can be
+ done with a string or a :py:class:`AddressFamily` object.
+
+ :rtype: :py:class:`AddressFamily`
+
+ .. py:attribute:: shared
+
+ True if address is in use by multiple callers, otherwise False
+
+ :rtype: bool
+
+===============
+AddressFamily
+===============
+
+.. py:class:: AddressFamily
+
+ Address family representation::
+
+ af = netlink.AddressFamily('inet6')
+ # raises:
+ # - ValueError if family name is not known
+ # - TypeError if invalid type is specified for family
+
+ print af # => 'inet6' (string representation)
+ print int(af) # => 10 (numeric representation)
+ print repr(af) # => AddressFamily('inet6')
+
+===============
+Exceptions
+===============
+
+.. py:exception:: NetlinkError
+
+ Generic exception raised by netlink modules.
+
+.. py:exception:: KernelError
+
+ Raised if an error occured while communicating with the kernel. Contains
+ the error code returning which is automatically included in the error
+ message.
+
+.. py:exception:: ImmutableError
+
+ Raised if an attribute is modified which is marked immutable.
+
+===============
+Socket
+===============
+
+.. py:class:: Socket
+
+ Netlink socket.
+
+ Note: It is not required to manually create and connect netlink sockets
+ when using caches. The caches will automatically lookup or create a
+ socket as needed.
+
+ .. py:attribute:: local_port
+
+ Local port (address) of netlink socket
+
+ .. py:attribute:: peer_port
+
+ Peer port (remote address) of netlink socket. If set, all messages
+ will be sent to that peer.
+
+ .. py:method:: connect(proto)
+
+ Connect the netlink socket using the specified netlink protocol::
+ sock.connect(netlink.NETLINK_ROUTE)
+
+ .. py:method:: disconnect()
+
+ Disconnect the socket
+
+ .. py:method:: set_bufsize(rx, tx)
+
+ Sets the size of the socket buffer
+
diff --git a/ap/lib/libnl/libnl-3.2.25/python/doc/index.rst b/ap/lib/libnl/libnl-3.2.25/python/doc/index.rst
new file mode 100644
index 0000000..8de8ae3
--- /dev/null
+++ b/ap/lib/libnl/libnl-3.2.25/python/doc/index.rst
@@ -0,0 +1,24 @@
+.. libnl-python documentation master file, created by
+ sphinx-quickstart on Mon May 9 10:58:58 2011.
+ You can adapt this file completely to your liking, but it should at least
+ contain the root `toctree` directive.
+
+Welcome to libnl-python's documentation!
+========================================
+
+Contents:
+
+.. toctree::
+ :maxdepth: 2
+
+ core
+ route
+ route_addr
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
+
diff --git a/ap/lib/libnl/libnl-3.2.25/python/doc/route.rst b/ap/lib/libnl/libnl-3.2.25/python/doc/route.rst
new file mode 100644
index 0000000..0b8f3f9
--- /dev/null
+++ b/ap/lib/libnl/libnl-3.2.25/python/doc/route.rst
@@ -0,0 +1,3 @@
+**********************
+Routing
+**********************
diff --git a/ap/lib/libnl/libnl-3.2.25/python/doc/route_addr.rst b/ap/lib/libnl/libnl-3.2.25/python/doc/route_addr.rst
new file mode 100644
index 0000000..2cfe139
--- /dev/null
+++ b/ap/lib/libnl/libnl-3.2.25/python/doc/route_addr.rst
@@ -0,0 +1,47 @@
+=================
+Network Addresses
+=================
+
+The **Address** module provides access to the network address configuration
+of the kernel. It provides an interface to fetch all configured addresses,
+add new addresses and to delete existing addresses.
+
+Fetching the list of network addresses is achieved by creating a new
+address cache::
+
+ import netlink.route.address as Address
+
+ addr_cache = Address.AddressCache()
+ addr_cache.refill()
+
+ for addr in addr_cache:
+ print addr
+
+.. py:module:: netlink.route.addr
+
+
+AddressCache
+------------
+
+.. py:class:: AddressCache
+
+ Represents a cache containing all or a subset of network addresses.
+
+ .. py:method:: lookup(ifindex, local)
+
+ Lookup the address which matches ifindex and local address
+
+ :raises: KeyError if address is not found.
+
+Address
+-------
+
+.. py:class:: Address
+
+ Representation of a configured network address.
+
+ .. py:attribute:: ifindex
+
+ Interface index
+
+ :rtype: int