[T106][ZXW-22]7520V3SCV2.01.01.02P42U09_VEC_V0.8_AP_VEC origin source commit
Change-Id: Ic6e05d89ecd62fc34f82b23dcf306c93764aec4b
diff --git a/ap/os/linux/linux-3.4.x/drivers/acpi/thermal.c b/ap/os/linux/linux-3.4.x/drivers/acpi/thermal.c
new file mode 100644
index 0000000..7dbebea
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/acpi/thermal.c
@@ -0,0 +1,1180 @@
+/*
+ * acpi_thermal.c - ACPI Thermal Zone Driver ($Revision: 41 $)
+ *
+ * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
+ * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This driver fully implements the ACPI thermal policy as described in the
+ * ACPI 2.0 Specification.
+ *
+ * TBD: 1. Implement passive cooling hysteresis.
+ * 2. Enhance passive cooling (CPU) states/limit interface to support
+ * concepts of 'multiple limiters', upper/lower limits, etc.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/jiffies.h>
+#include <linux/kmod.h>
+#include <linux/reboot.h>
+#include <linux/device.h>
+#include <asm/uaccess.h>
+#include <linux/thermal.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+
+#define PREFIX "ACPI: "
+
+#define ACPI_THERMAL_CLASS "thermal_zone"
+#define ACPI_THERMAL_DEVICE_NAME "Thermal Zone"
+#define ACPI_THERMAL_FILE_STATE "state"
+#define ACPI_THERMAL_FILE_TEMPERATURE "temperature"
+#define ACPI_THERMAL_FILE_TRIP_POINTS "trip_points"
+#define ACPI_THERMAL_FILE_COOLING_MODE "cooling_mode"
+#define ACPI_THERMAL_FILE_POLLING_FREQ "polling_frequency"
+#define ACPI_THERMAL_NOTIFY_TEMPERATURE 0x80
+#define ACPI_THERMAL_NOTIFY_THRESHOLDS 0x81
+#define ACPI_THERMAL_NOTIFY_DEVICES 0x82
+#define ACPI_THERMAL_NOTIFY_CRITICAL 0xF0
+#define ACPI_THERMAL_NOTIFY_HOT 0xF1
+#define ACPI_THERMAL_MODE_ACTIVE 0x00
+
+#define ACPI_THERMAL_MAX_ACTIVE 10
+#define ACPI_THERMAL_MAX_LIMIT_STR_LEN 65
+
+#define _COMPONENT ACPI_THERMAL_COMPONENT
+ACPI_MODULE_NAME("thermal");
+
+MODULE_AUTHOR("Paul Diefenbaugh");
+MODULE_DESCRIPTION("ACPI Thermal Zone Driver");
+MODULE_LICENSE("GPL");
+
+static int act;
+module_param(act, int, 0644);
+MODULE_PARM_DESC(act, "Disable or override all lowest active trip points.");
+
+static int crt;
+module_param(crt, int, 0644);
+MODULE_PARM_DESC(crt, "Disable or lower all critical trip points.");
+
+static int tzp;
+module_param(tzp, int, 0444);
+MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.");
+
+static int nocrt;
+module_param(nocrt, int, 0);
+MODULE_PARM_DESC(nocrt, "Set to take no action upon ACPI thermal zone critical trips points.");
+
+static int off;
+module_param(off, int, 0);
+MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.");
+
+static int psv;
+module_param(psv, int, 0644);
+MODULE_PARM_DESC(psv, "Disable or override all passive trip points.");
+
+static int acpi_thermal_add(struct acpi_device *device);
+static int acpi_thermal_remove(struct acpi_device *device, int type);
+static int acpi_thermal_resume(struct acpi_device *device);
+static void acpi_thermal_notify(struct acpi_device *device, u32 event);
+
+static const struct acpi_device_id thermal_device_ids[] = {
+ {ACPI_THERMAL_HID, 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, thermal_device_ids);
+
+static struct acpi_driver acpi_thermal_driver = {
+ .name = "thermal",
+ .class = ACPI_THERMAL_CLASS,
+ .ids = thermal_device_ids,
+ .ops = {
+ .add = acpi_thermal_add,
+ .remove = acpi_thermal_remove,
+ .resume = acpi_thermal_resume,
+ .notify = acpi_thermal_notify,
+ },
+};
+
+struct acpi_thermal_state {
+ u8 critical:1;
+ u8 hot:1;
+ u8 passive:1;
+ u8 active:1;
+ u8 reserved:4;
+ int active_index;
+};
+
+struct acpi_thermal_state_flags {
+ u8 valid:1;
+ u8 enabled:1;
+ u8 reserved:6;
+};
+
+struct acpi_thermal_critical {
+ struct acpi_thermal_state_flags flags;
+ unsigned long temperature;
+};
+
+struct acpi_thermal_hot {
+ struct acpi_thermal_state_flags flags;
+ unsigned long temperature;
+};
+
+struct acpi_thermal_passive {
+ struct acpi_thermal_state_flags flags;
+ unsigned long temperature;
+ unsigned long tc1;
+ unsigned long tc2;
+ unsigned long tsp;
+ struct acpi_handle_list devices;
+};
+
+struct acpi_thermal_active {
+ struct acpi_thermal_state_flags flags;
+ unsigned long temperature;
+ struct acpi_handle_list devices;
+};
+
+struct acpi_thermal_trips {
+ struct acpi_thermal_critical critical;
+ struct acpi_thermal_hot hot;
+ struct acpi_thermal_passive passive;
+ struct acpi_thermal_active active[ACPI_THERMAL_MAX_ACTIVE];
+};
+
+struct acpi_thermal_flags {
+ u8 cooling_mode:1; /* _SCP */
+ u8 devices:1; /* _TZD */
+ u8 reserved:6;
+};
+
+struct acpi_thermal {
+ struct acpi_device * device;
+ acpi_bus_id name;
+ unsigned long temperature;
+ unsigned long last_temperature;
+ unsigned long polling_frequency;
+ volatile u8 zombie;
+ struct acpi_thermal_flags flags;
+ struct acpi_thermal_state state;
+ struct acpi_thermal_trips trips;
+ struct acpi_handle_list devices;
+ struct thermal_zone_device *thermal_zone;
+ int tz_enabled;
+ int kelvin_offset;
+ struct mutex lock;
+};
+
+/* --------------------------------------------------------------------------
+ Thermal Zone Management
+ -------------------------------------------------------------------------- */
+
+static int acpi_thermal_get_temperature(struct acpi_thermal *tz)
+{
+ acpi_status status = AE_OK;
+ unsigned long long tmp;
+
+ if (!tz)
+ return -EINVAL;
+
+ tz->last_temperature = tz->temperature;
+
+ status = acpi_evaluate_integer(tz->device->handle, "_TMP", NULL, &tmp);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ tz->temperature = tmp;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Temperature is %lu dK\n",
+ tz->temperature));
+
+ return 0;
+}
+
+static int acpi_thermal_get_polling_frequency(struct acpi_thermal *tz)
+{
+ acpi_status status = AE_OK;
+ unsigned long long tmp;
+
+ if (!tz)
+ return -EINVAL;
+
+ status = acpi_evaluate_integer(tz->device->handle, "_TZP", NULL, &tmp);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ tz->polling_frequency = tmp;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Polling frequency is %lu dS\n",
+ tz->polling_frequency));
+
+ return 0;
+}
+
+static int acpi_thermal_set_cooling_mode(struct acpi_thermal *tz, int mode)
+{
+ acpi_status status = AE_OK;
+ union acpi_object arg0 = { ACPI_TYPE_INTEGER };
+ struct acpi_object_list arg_list = { 1, &arg0 };
+ acpi_handle handle = NULL;
+
+
+ if (!tz)
+ return -EINVAL;
+
+ status = acpi_get_handle(tz->device->handle, "_SCP", &handle);
+ if (ACPI_FAILURE(status)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "_SCP not present\n"));
+ return -ENODEV;
+ }
+
+ arg0.integer.value = mode;
+
+ status = acpi_evaluate_object(handle, NULL, &arg_list, NULL);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ return 0;
+}
+
+#define ACPI_TRIPS_CRITICAL 0x01
+#define ACPI_TRIPS_HOT 0x02
+#define ACPI_TRIPS_PASSIVE 0x04
+#define ACPI_TRIPS_ACTIVE 0x08
+#define ACPI_TRIPS_DEVICES 0x10
+
+#define ACPI_TRIPS_REFRESH_THRESHOLDS (ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE)
+#define ACPI_TRIPS_REFRESH_DEVICES ACPI_TRIPS_DEVICES
+
+#define ACPI_TRIPS_INIT (ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT | \
+ ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE | \
+ ACPI_TRIPS_DEVICES)
+
+/*
+ * This exception is thrown out in two cases:
+ * 1.An invalid trip point becomes invalid or a valid trip point becomes invalid
+ * when re-evaluating the AML code.
+ * 2.TODO: Devices listed in _PSL, _ALx, _TZD may change.
+ * We need to re-bind the cooling devices of a thermal zone when this occurs.
+ */
+#define ACPI_THERMAL_TRIPS_EXCEPTION(flags, str) \
+do { \
+ if (flags != ACPI_TRIPS_INIT) \
+ ACPI_EXCEPTION((AE_INFO, AE_ERROR, \
+ "ACPI thermal trip point %s changed\n" \
+ "Please send acpidump to linux-acpi@vger.kernel.org\n", str)); \
+} while (0)
+
+static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
+{
+ acpi_status status = AE_OK;
+ unsigned long long tmp;
+ struct acpi_handle_list devices;
+ int valid = 0;
+ int i;
+
+ /* Critical Shutdown */
+ if (flag & ACPI_TRIPS_CRITICAL) {
+ status = acpi_evaluate_integer(tz->device->handle,
+ "_CRT", NULL, &tmp);
+ tz->trips.critical.temperature = tmp;
+ /*
+ * Treat freezing temperatures as invalid as well; some
+ * BIOSes return really low values and cause reboots at startup.
+ * Below zero (Celsius) values clearly aren't right for sure..
+ * ... so lets discard those as invalid.
+ */
+ if (ACPI_FAILURE(status)) {
+ tz->trips.critical.flags.valid = 0;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "No critical threshold\n"));
+ } else if (tmp <= 2732) {
+ printk(KERN_WARNING FW_BUG "Invalid critical threshold "
+ "(%llu)\n", tmp);
+ tz->trips.critical.flags.valid = 0;
+ } else {
+ tz->trips.critical.flags.valid = 1;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Found critical threshold [%lu]\n",
+ tz->trips.critical.temperature));
+ }
+ if (tz->trips.critical.flags.valid == 1) {
+ if (crt == -1) {
+ tz->trips.critical.flags.valid = 0;
+ } else if (crt > 0) {
+ unsigned long crt_k = CELSIUS_TO_KELVIN(crt);
+ /*
+ * Allow override critical threshold
+ */
+ if (crt_k > tz->trips.critical.temperature)
+ printk(KERN_WARNING PREFIX
+ "Critical threshold %d C\n", crt);
+ tz->trips.critical.temperature = crt_k;
+ }
+ }
+ }
+
+ /* Critical Sleep (optional) */
+ if (flag & ACPI_TRIPS_HOT) {
+ status = acpi_evaluate_integer(tz->device->handle,
+ "_HOT", NULL, &tmp);
+ if (ACPI_FAILURE(status)) {
+ tz->trips.hot.flags.valid = 0;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "No hot threshold\n"));
+ } else {
+ tz->trips.hot.temperature = tmp;
+ tz->trips.hot.flags.valid = 1;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Found hot threshold [%lu]\n",
+ tz->trips.critical.temperature));
+ }
+ }
+
+ /* Passive (optional) */
+ if (((flag & ACPI_TRIPS_PASSIVE) && tz->trips.passive.flags.valid) ||
+ (flag == ACPI_TRIPS_INIT)) {
+ valid = tz->trips.passive.flags.valid;
+ if (psv == -1) {
+ status = AE_SUPPORT;
+ } else if (psv > 0) {
+ tmp = CELSIUS_TO_KELVIN(psv);
+ status = AE_OK;
+ } else {
+ status = acpi_evaluate_integer(tz->device->handle,
+ "_PSV", NULL, &tmp);
+ }
+
+ if (ACPI_FAILURE(status))
+ tz->trips.passive.flags.valid = 0;
+ else {
+ tz->trips.passive.temperature = tmp;
+ tz->trips.passive.flags.valid = 1;
+ if (flag == ACPI_TRIPS_INIT) {
+ status = acpi_evaluate_integer(
+ tz->device->handle, "_TC1",
+ NULL, &tmp);
+ if (ACPI_FAILURE(status))
+ tz->trips.passive.flags.valid = 0;
+ else
+ tz->trips.passive.tc1 = tmp;
+ status = acpi_evaluate_integer(
+ tz->device->handle, "_TC2",
+ NULL, &tmp);
+ if (ACPI_FAILURE(status))
+ tz->trips.passive.flags.valid = 0;
+ else
+ tz->trips.passive.tc2 = tmp;
+ status = acpi_evaluate_integer(
+ tz->device->handle, "_TSP",
+ NULL, &tmp);
+ if (ACPI_FAILURE(status))
+ tz->trips.passive.flags.valid = 0;
+ else
+ tz->trips.passive.tsp = tmp;
+ }
+ }
+ }
+ if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.passive.flags.valid) {
+ memset(&devices, 0, sizeof(struct acpi_handle_list));
+ status = acpi_evaluate_reference(tz->device->handle, "_PSL",
+ NULL, &devices);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_WARNING PREFIX
+ "Invalid passive threshold\n");
+ tz->trips.passive.flags.valid = 0;
+ }
+ else
+ tz->trips.passive.flags.valid = 1;
+
+ if (memcmp(&tz->trips.passive.devices, &devices,
+ sizeof(struct acpi_handle_list))) {
+ memcpy(&tz->trips.passive.devices, &devices,
+ sizeof(struct acpi_handle_list));
+ ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
+ }
+ }
+ if ((flag & ACPI_TRIPS_PASSIVE) || (flag & ACPI_TRIPS_DEVICES)) {
+ if (valid != tz->trips.passive.flags.valid)
+ ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
+ }
+
+ /* Active (optional) */
+ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+ char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
+ valid = tz->trips.active[i].flags.valid;
+
+ if (act == -1)
+ break; /* disable all active trip points */
+
+ if ((flag == ACPI_TRIPS_INIT) || ((flag & ACPI_TRIPS_ACTIVE) &&
+ tz->trips.active[i].flags.valid)) {
+ status = acpi_evaluate_integer(tz->device->handle,
+ name, NULL, &tmp);
+ if (ACPI_FAILURE(status)) {
+ tz->trips.active[i].flags.valid = 0;
+ if (i == 0)
+ break;
+ if (act <= 0)
+ break;
+ if (i == 1)
+ tz->trips.active[0].temperature =
+ CELSIUS_TO_KELVIN(act);
+ else
+ /*
+ * Don't allow override higher than
+ * the next higher trip point
+ */
+ tz->trips.active[i - 1].temperature =
+ (tz->trips.active[i - 2].temperature <
+ CELSIUS_TO_KELVIN(act) ?
+ tz->trips.active[i - 2].temperature :
+ CELSIUS_TO_KELVIN(act));
+ break;
+ } else {
+ tz->trips.active[i].temperature = tmp;
+ tz->trips.active[i].flags.valid = 1;
+ }
+ }
+
+ name[2] = 'L';
+ if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.active[i].flags.valid ) {
+ memset(&devices, 0, sizeof(struct acpi_handle_list));
+ status = acpi_evaluate_reference(tz->device->handle,
+ name, NULL, &devices);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_WARNING PREFIX
+ "Invalid active%d threshold\n", i);
+ tz->trips.active[i].flags.valid = 0;
+ }
+ else
+ tz->trips.active[i].flags.valid = 1;
+
+ if (memcmp(&tz->trips.active[i].devices, &devices,
+ sizeof(struct acpi_handle_list))) {
+ memcpy(&tz->trips.active[i].devices, &devices,
+ sizeof(struct acpi_handle_list));
+ ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
+ }
+ }
+ if ((flag & ACPI_TRIPS_ACTIVE) || (flag & ACPI_TRIPS_DEVICES))
+ if (valid != tz->trips.active[i].flags.valid)
+ ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
+
+ if (!tz->trips.active[i].flags.valid)
+ break;
+ }
+
+ if (flag & ACPI_TRIPS_DEVICES) {
+ memset(&devices, 0, sizeof(struct acpi_handle_list));
+ status = acpi_evaluate_reference(tz->device->handle, "_TZD",
+ NULL, &devices);
+ if (memcmp(&tz->devices, &devices,
+ sizeof(struct acpi_handle_list))) {
+ memcpy(&tz->devices, &devices,
+ sizeof(struct acpi_handle_list));
+ ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
+ }
+ }
+
+ return 0;
+}
+
+static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
+{
+ int i, valid, ret = acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
+
+ if (ret)
+ return ret;
+
+ valid = tz->trips.critical.flags.valid |
+ tz->trips.hot.flags.valid |
+ tz->trips.passive.flags.valid;
+
+ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
+ valid |= tz->trips.active[i].flags.valid;
+
+ if (!valid) {
+ printk(KERN_WARNING FW_BUG "No valid trip found\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static void acpi_thermal_check(void *data)
+{
+ struct acpi_thermal *tz = data;
+
+ thermal_zone_device_update(tz->thermal_zone);
+}
+
+/* sys I/F for generic thermal sysfs support */
+#define KELVIN_TO_MILLICELSIUS(t, off) (((t) - (off)) * 100)
+
+static int thermal_get_temp(struct thermal_zone_device *thermal,
+ unsigned long *temp)
+{
+ struct acpi_thermal *tz = thermal->devdata;
+ int result;
+
+ if (!tz)
+ return -EINVAL;
+
+ result = acpi_thermal_get_temperature(tz);
+ if (result)
+ return result;
+
+ *temp = KELVIN_TO_MILLICELSIUS(tz->temperature, tz->kelvin_offset);
+ return 0;
+}
+
+static const char enabled[] = "kernel";
+static const char disabled[] = "user";
+static int thermal_get_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode *mode)
+{
+ struct acpi_thermal *tz = thermal->devdata;
+
+ if (!tz)
+ return -EINVAL;
+
+ *mode = tz->tz_enabled ? THERMAL_DEVICE_ENABLED :
+ THERMAL_DEVICE_DISABLED;
+
+ return 0;
+}
+
+static int thermal_set_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode mode)
+{
+ struct acpi_thermal *tz = thermal->devdata;
+ int enable;
+
+ if (!tz)
+ return -EINVAL;
+
+ /*
+ * enable/disable thermal management from ACPI thermal driver
+ */
+ if (mode == THERMAL_DEVICE_ENABLED)
+ enable = 1;
+ else if (mode == THERMAL_DEVICE_DISABLED)
+ enable = 0;
+ else
+ return -EINVAL;
+
+ if (enable != tz->tz_enabled) {
+ tz->tz_enabled = enable;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "%s ACPI thermal control\n",
+ tz->tz_enabled ? enabled : disabled));
+ acpi_thermal_check(tz);
+ }
+ return 0;
+}
+
+static int thermal_get_trip_type(struct thermal_zone_device *thermal,
+ int trip, enum thermal_trip_type *type)
+{
+ struct acpi_thermal *tz = thermal->devdata;
+ int i;
+
+ if (!tz || trip < 0)
+ return -EINVAL;
+
+ if (tz->trips.critical.flags.valid) {
+ if (!trip) {
+ *type = THERMAL_TRIP_CRITICAL;
+ return 0;
+ }
+ trip--;
+ }
+
+ if (tz->trips.hot.flags.valid) {
+ if (!trip) {
+ *type = THERMAL_TRIP_HOT;
+ return 0;
+ }
+ trip--;
+ }
+
+ if (tz->trips.passive.flags.valid) {
+ if (!trip) {
+ *type = THERMAL_TRIP_PASSIVE;
+ return 0;
+ }
+ trip--;
+ }
+
+ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
+ tz->trips.active[i].flags.valid; i++) {
+ if (!trip) {
+ *type = THERMAL_TRIP_ACTIVE;
+ return 0;
+ }
+ trip--;
+ }
+
+ return -EINVAL;
+}
+
+static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
+ int trip, unsigned long *temp)
+{
+ struct acpi_thermal *tz = thermal->devdata;
+ int i;
+
+ if (!tz || trip < 0)
+ return -EINVAL;
+
+ if (tz->trips.critical.flags.valid) {
+ if (!trip) {
+ *temp = KELVIN_TO_MILLICELSIUS(
+ tz->trips.critical.temperature,
+ tz->kelvin_offset);
+ return 0;
+ }
+ trip--;
+ }
+
+ if (tz->trips.hot.flags.valid) {
+ if (!trip) {
+ *temp = KELVIN_TO_MILLICELSIUS(
+ tz->trips.hot.temperature,
+ tz->kelvin_offset);
+ return 0;
+ }
+ trip--;
+ }
+
+ if (tz->trips.passive.flags.valid) {
+ if (!trip) {
+ *temp = KELVIN_TO_MILLICELSIUS(
+ tz->trips.passive.temperature,
+ tz->kelvin_offset);
+ return 0;
+ }
+ trip--;
+ }
+
+ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
+ tz->trips.active[i].flags.valid; i++) {
+ if (!trip) {
+ *temp = KELVIN_TO_MILLICELSIUS(
+ tz->trips.active[i].temperature,
+ tz->kelvin_offset);
+ return 0;
+ }
+ trip--;
+ }
+
+ return -EINVAL;
+}
+
+static int thermal_get_crit_temp(struct thermal_zone_device *thermal,
+ unsigned long *temperature) {
+ struct acpi_thermal *tz = thermal->devdata;
+
+ if (tz->trips.critical.flags.valid) {
+ *temperature = KELVIN_TO_MILLICELSIUS(
+ tz->trips.critical.temperature,
+ tz->kelvin_offset);
+ return 0;
+ } else
+ return -EINVAL;
+}
+
+static int thermal_notify(struct thermal_zone_device *thermal, int trip,
+ enum thermal_trip_type trip_type)
+{
+ u8 type = 0;
+ struct acpi_thermal *tz = thermal->devdata;
+
+ if (trip_type == THERMAL_TRIP_CRITICAL)
+ type = ACPI_THERMAL_NOTIFY_CRITICAL;
+ else if (trip_type == THERMAL_TRIP_HOT)
+ type = ACPI_THERMAL_NOTIFY_HOT;
+ else
+ return 0;
+
+ acpi_bus_generate_proc_event(tz->device, type, 1);
+ acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
+ dev_name(&tz->device->dev), type, 1);
+
+ if (trip_type == THERMAL_TRIP_CRITICAL && nocrt)
+ return 1;
+
+ return 0;
+}
+
+typedef int (*cb)(struct thermal_zone_device *, int,
+ struct thermal_cooling_device *);
+static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev,
+ cb action)
+{
+ struct acpi_device *device = cdev->devdata;
+ struct acpi_thermal *tz = thermal->devdata;
+ struct acpi_device *dev;
+ acpi_status status;
+ acpi_handle handle;
+ int i;
+ int j;
+ int trip = -1;
+ int result = 0;
+
+ if (tz->trips.critical.flags.valid)
+ trip++;
+
+ if (tz->trips.hot.flags.valid)
+ trip++;
+
+ if (tz->trips.passive.flags.valid) {
+ trip++;
+ for (i = 0; i < tz->trips.passive.devices.count;
+ i++) {
+ handle = tz->trips.passive.devices.handles[i];
+ status = acpi_bus_get_device(handle, &dev);
+ if (ACPI_SUCCESS(status) && (dev == device)) {
+ result = action(thermal, trip, cdev);
+ if (result)
+ goto failed;
+ }
+ }
+ }
+
+ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+ if (!tz->trips.active[i].flags.valid)
+ break;
+ trip++;
+ for (j = 0;
+ j < tz->trips.active[i].devices.count;
+ j++) {
+ handle = tz->trips.active[i].devices.handles[j];
+ status = acpi_bus_get_device(handle, &dev);
+ if (ACPI_SUCCESS(status) && (dev == device)) {
+ result = action(thermal, trip, cdev);
+ if (result)
+ goto failed;
+ }
+ }
+ }
+
+ for (i = 0; i < tz->devices.count; i++) {
+ handle = tz->devices.handles[i];
+ status = acpi_bus_get_device(handle, &dev);
+ if (ACPI_SUCCESS(status) && (dev == device)) {
+ result = action(thermal, -1, cdev);
+ if (result)
+ goto failed;
+ }
+ }
+
+failed:
+ return result;
+}
+
+static int
+acpi_thermal_bind_cooling_device(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ return acpi_thermal_cooling_device_cb(thermal, cdev,
+ thermal_zone_bind_cooling_device);
+}
+
+static int
+acpi_thermal_unbind_cooling_device(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ return acpi_thermal_cooling_device_cb(thermal, cdev,
+ thermal_zone_unbind_cooling_device);
+}
+
+static const struct thermal_zone_device_ops acpi_thermal_zone_ops = {
+ .bind = acpi_thermal_bind_cooling_device,
+ .unbind = acpi_thermal_unbind_cooling_device,
+ .get_temp = thermal_get_temp,
+ .get_mode = thermal_get_mode,
+ .set_mode = thermal_set_mode,
+ .get_trip_type = thermal_get_trip_type,
+ .get_trip_temp = thermal_get_trip_temp,
+ .get_crit_temp = thermal_get_crit_temp,
+ .notify = thermal_notify,
+};
+
+static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
+{
+ int trips = 0;
+ int result;
+ acpi_status status;
+ int i;
+
+ if (tz->trips.critical.flags.valid)
+ trips++;
+
+ if (tz->trips.hot.flags.valid)
+ trips++;
+
+ if (tz->trips.passive.flags.valid)
+ trips++;
+
+ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
+ tz->trips.active[i].flags.valid; i++, trips++);
+
+ if (tz->trips.passive.flags.valid)
+ tz->thermal_zone =
+ thermal_zone_device_register("acpitz", trips, tz,
+ &acpi_thermal_zone_ops,
+ tz->trips.passive.tc1,
+ tz->trips.passive.tc2,
+ tz->trips.passive.tsp*100,
+ tz->polling_frequency*100);
+ else
+ tz->thermal_zone =
+ thermal_zone_device_register("acpitz", trips, tz,
+ &acpi_thermal_zone_ops,
+ 0, 0, 0,
+ tz->polling_frequency*100);
+ if (IS_ERR(tz->thermal_zone))
+ return -ENODEV;
+
+ result = sysfs_create_link(&tz->device->dev.kobj,
+ &tz->thermal_zone->device.kobj, "thermal_zone");
+ if (result)
+ return result;
+
+ result = sysfs_create_link(&tz->thermal_zone->device.kobj,
+ &tz->device->dev.kobj, "device");
+ if (result)
+ return result;
+
+ status = acpi_attach_data(tz->device->handle,
+ acpi_bus_private_data_handler,
+ tz->thermal_zone);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR PREFIX
+ "Error attaching device data\n");
+ return -ENODEV;
+ }
+
+ tz->tz_enabled = 1;
+
+ dev_info(&tz->device->dev, "registered as thermal_zone%d\n",
+ tz->thermal_zone->id);
+ return 0;
+}
+
+static void acpi_thermal_unregister_thermal_zone(struct acpi_thermal *tz)
+{
+ sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone");
+ sysfs_remove_link(&tz->thermal_zone->device.kobj, "device");
+ thermal_zone_device_unregister(tz->thermal_zone);
+ tz->thermal_zone = NULL;
+ acpi_detach_data(tz->device->handle, acpi_bus_private_data_handler);
+}
+
+
+/* --------------------------------------------------------------------------
+ Driver Interface
+ -------------------------------------------------------------------------- */
+
+static void acpi_thermal_notify(struct acpi_device *device, u32 event)
+{
+ struct acpi_thermal *tz = acpi_driver_data(device);
+
+
+ if (!tz)
+ return;
+
+ switch (event) {
+ case ACPI_THERMAL_NOTIFY_TEMPERATURE:
+ acpi_thermal_check(tz);
+ break;
+ case ACPI_THERMAL_NOTIFY_THRESHOLDS:
+ acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_THRESHOLDS);
+ acpi_thermal_check(tz);
+ acpi_bus_generate_proc_event(device, event, 0);
+ acpi_bus_generate_netlink_event(device->pnp.device_class,
+ dev_name(&device->dev), event, 0);
+ break;
+ case ACPI_THERMAL_NOTIFY_DEVICES:
+ acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES);
+ acpi_thermal_check(tz);
+ acpi_bus_generate_proc_event(device, event, 0);
+ acpi_bus_generate_netlink_event(device->pnp.device_class,
+ dev_name(&device->dev), event, 0);
+ break;
+ default:
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Unsupported event [0x%x]\n", event));
+ break;
+ }
+}
+
+static int acpi_thermal_get_info(struct acpi_thermal *tz)
+{
+ int result = 0;
+
+
+ if (!tz)
+ return -EINVAL;
+
+ /* Get trip points [_CRT, _PSV, etc.] (required) */
+ result = acpi_thermal_get_trip_points(tz);
+ if (result)
+ return result;
+
+ /* Get temperature [_TMP] (required) */
+ result = acpi_thermal_get_temperature(tz);
+ if (result)
+ return result;
+
+ /* Set the cooling mode [_SCP] to active cooling (default) */
+ result = acpi_thermal_set_cooling_mode(tz, ACPI_THERMAL_MODE_ACTIVE);
+ if (!result)
+ tz->flags.cooling_mode = 1;
+
+ /* Get default polling frequency [_TZP] (optional) */
+ if (tzp)
+ tz->polling_frequency = tzp;
+ else
+ acpi_thermal_get_polling_frequency(tz);
+
+ return 0;
+}
+
+/*
+ * The exact offset between Kelvin and degree Celsius is 273.15. However ACPI
+ * handles temperature values with a single decimal place. As a consequence,
+ * some implementations use an offset of 273.1 and others use an offset of
+ * 273.2. Try to find out which one is being used, to present the most
+ * accurate and visually appealing number.
+ *
+ * The heuristic below should work for all ACPI thermal zones which have a
+ * critical trip point with a value being a multiple of 0.5 degree Celsius.
+ */
+static void acpi_thermal_guess_offset(struct acpi_thermal *tz)
+{
+ if (tz->trips.critical.flags.valid &&
+ (tz->trips.critical.temperature % 5) == 1)
+ tz->kelvin_offset = 2731;
+ else
+ tz->kelvin_offset = 2732;
+}
+
+static int acpi_thermal_add(struct acpi_device *device)
+{
+ int result = 0;
+ struct acpi_thermal *tz = NULL;
+
+
+ if (!device)
+ return -EINVAL;
+
+ tz = kzalloc(sizeof(struct acpi_thermal), GFP_KERNEL);
+ if (!tz)
+ return -ENOMEM;
+
+ tz->device = device;
+ strcpy(tz->name, device->pnp.bus_id);
+ strcpy(acpi_device_name(device), ACPI_THERMAL_DEVICE_NAME);
+ strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS);
+ device->driver_data = tz;
+ mutex_init(&tz->lock);
+
+
+ result = acpi_thermal_get_info(tz);
+ if (result)
+ goto free_memory;
+
+ acpi_thermal_guess_offset(tz);
+
+ result = acpi_thermal_register_thermal_zone(tz);
+ if (result)
+ goto free_memory;
+
+ printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n",
+ acpi_device_name(device), acpi_device_bid(device),
+ KELVIN_TO_CELSIUS(tz->temperature));
+ goto end;
+
+free_memory:
+ kfree(tz);
+end:
+ return result;
+}
+
+static int acpi_thermal_remove(struct acpi_device *device, int type)
+{
+ struct acpi_thermal *tz = NULL;
+
+ if (!device || !acpi_driver_data(device))
+ return -EINVAL;
+
+ tz = acpi_driver_data(device);
+
+ acpi_thermal_unregister_thermal_zone(tz);
+ mutex_destroy(&tz->lock);
+ kfree(tz);
+ return 0;
+}
+
+static int acpi_thermal_resume(struct acpi_device *device)
+{
+ struct acpi_thermal *tz = NULL;
+ int i, j, power_state, result;
+
+
+ if (!device || !acpi_driver_data(device))
+ return -EINVAL;
+
+ tz = acpi_driver_data(device);
+
+ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+ if (!(&tz->trips.active[i]))
+ break;
+ if (!tz->trips.active[i].flags.valid)
+ break;
+ tz->trips.active[i].flags.enabled = 1;
+ for (j = 0; j < tz->trips.active[i].devices.count; j++) {
+ result = acpi_bus_update_power(
+ tz->trips.active[i].devices.handles[j],
+ &power_state);
+ if (result || (power_state != ACPI_STATE_D0)) {
+ tz->trips.active[i].flags.enabled = 0;
+ break;
+ }
+ }
+ tz->state.active |= tz->trips.active[i].flags.enabled;
+ }
+
+ acpi_thermal_check(tz);
+
+ return AE_OK;
+}
+
+static int thermal_act(const struct dmi_system_id *d) {
+
+ if (act == 0) {
+ printk(KERN_NOTICE "ACPI: %s detected: "
+ "disabling all active thermal trip points\n", d->ident);
+ act = -1;
+ }
+ return 0;
+}
+static int thermal_nocrt(const struct dmi_system_id *d) {
+
+ printk(KERN_NOTICE "ACPI: %s detected: "
+ "disabling all critical thermal trip point actions.\n", d->ident);
+ nocrt = 1;
+ return 0;
+}
+static int thermal_tzp(const struct dmi_system_id *d) {
+
+ if (tzp == 0) {
+ printk(KERN_NOTICE "ACPI: %s detected: "
+ "enabling thermal zone polling\n", d->ident);
+ tzp = 300; /* 300 dS = 30 Seconds */
+ }
+ return 0;
+}
+static int thermal_psv(const struct dmi_system_id *d) {
+
+ if (psv == 0) {
+ printk(KERN_NOTICE "ACPI: %s detected: "
+ "disabling all passive thermal trip points\n", d->ident);
+ psv = -1;
+ }
+ return 0;
+}
+
+static struct dmi_system_id thermal_dmi_table[] __initdata = {
+ /*
+ * Award BIOS on this AOpen makes thermal control almost worthless.
+ * http://bugzilla.kernel.org/show_bug.cgi?id=8842
+ */
+ {
+ .callback = thermal_act,
+ .ident = "AOpen i915GMm-HFS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+ DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
+ },
+ },
+ {
+ .callback = thermal_psv,
+ .ident = "AOpen i915GMm-HFS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+ DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
+ },
+ },
+ {
+ .callback = thermal_tzp,
+ .ident = "AOpen i915GMm-HFS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+ DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
+ },
+ },
+ {
+ .callback = thermal_nocrt,
+ .ident = "Gigabyte GA-7ZX",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "7ZX"),
+ },
+ },
+ {}
+};
+
+static int __init acpi_thermal_init(void)
+{
+ int result = 0;
+
+ dmi_check_system(thermal_dmi_table);
+
+ if (off) {
+ printk(KERN_NOTICE "ACPI: thermal control disabled\n");
+ return -ENODEV;
+ }
+
+ result = acpi_bus_register_driver(&acpi_thermal_driver);
+ if (result < 0)
+ return -ENODEV;
+
+ return 0;
+}
+
+static void __exit acpi_thermal_exit(void)
+{
+
+ acpi_bus_unregister_driver(&acpi_thermal_driver);
+
+ return;
+}
+
+module_init(acpi_thermal_init);
+module_exit(acpi_thermal_exit);